===== Config file =====
[gcode_shell_command hello_world]
command = echo hello world
timeout = 2.
verbose = True

[gcode_macro HELLO_WORLD]
gcode = 
	RUN_SHELL_COMMAND CMD=hello_world

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro clean_nozzle]
variable_location_bucket_rear = True
variable_enable_purge = False
variable_purge_len = 10
variable_purge_spd = 150
variable_purge_temp_min = 200
variable_purge_ret = 11
variable_ooze_dwell = 2
variable_brush_top = 0.3
variable_clearance_z = 5
variable_wipe_qty = 3
variable_prep_spd_xy = 3000
variable_prep_spd_z = 300
variable_wipe_spd_xy = 5000
variable_brush_start = 30
variable_brush_width = 45
variable_brush_front = 0
variable_brush_depth = 0
variable_bucket_left_width = 25
variable_bucket_right_width = 25
variable_bucket_gap = 22
variable_bucket_start = 0
variable_bucket_pos = 1
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	SAVE_GCODE_STATE NAME=clean_nozzle
	G90
	{% set Ry = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% if enable_purge %}
	SET_GCODE_VARIABLE MACRO=clean_nozzle VARIABLE=bucket_pos VALUE={(range(2) | random)}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	{% if location_bucket_rear %}
	G1 Y{Ry} F{prep_spd_xy}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)} F{prep_spd_xy}
	{% endif %}
	G1 X{bucket_start + (bucket_left_width / (2 - bucket_pos)) + (bucket_pos * bucket_gap) + (bucket_pos * (bucket_right_width / 2))}
	{% if printer.extruder.temperature >= purge_temp_min %}
	M83      ; relative mode
	G1 E{purge_len} F{purge_spd}
	G1 E-{purge_ret} F{purge_spd * 5}
	G4 P{ooze_dwell * 1000}
	G92 E0   ; reset extruder
	{% endif %}
	{% endif %}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{brush_start + (brush_width * bucket_pos)} F{prep_spd_xy}
	{% if location_bucket_rear %}
	G1 Y{Ry}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)}
	{% endif %}
	G1 Z{brush_top} F{prep_spd_z}
	{% for wipes in range(1, (wipe_qty + 1)) %}
	G1 X{brush_start + (brush_width * (1 - bucket_pos))} F{wipe_spd_xy}
	G1 X{brush_start + (brush_width * bucket_pos)} F{wipe_spd_xy}
	{% endfor %}
	M117 Cleaned!
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{bucket_left_width / 4} F{prep_spd_xy}
	RESTORE_GCODE_STATE NAME=clean_nozzle
	{% else %}
	{ action_raise_error("Please home your axes!") }
	M117 Please home first!
	{% endif %}

[menu __mymain __tune]
type = list
enable = {printer.idle_timeout.state == "Printing"}
name = Tune

[menu __mymain __tune __speed]
type = input
name = Speed: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.speed_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M220 S{'%d' % (menu.input*100)}

[menu __mymain __tune __flow]
type = input
name = Flow: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.extrude_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M221 S{'%d' % (menu.input*100)}

[menu __mymain __tune __fanspeed]
type = input
enable = {'fan' in printer}
name = Fan speed: {'%3d' % (menu.input*100)}%
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 0.01
gcode = 
	M106 S{'%d' % (menu.input*255)}

[menu __mymain __tune __offsetz]
type = input
name = Offset Z:{'%05.3f' % menu.input}
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __control]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Control

[menu __mymain __control __move_x]
type = list
name = Move X

[menu __mymain __control __move_x __move_10mm]
type = input
name = X(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_1mm]
type = input
name = X(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_01mm]
type = input
name = X(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y]
type = list
name = Move Y

[menu __mymain __control __move_y __move_10mm]
type = input
name = Y(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_1mm]
type = input
name = Y(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_01mm]
type = input
name = Y(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z]
type = list
name = Move Z

[menu __mymain __control __move_z __move_10mm]
type = input
name = Z(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_1mm]
type = input
name = Z(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_01mm]
type = input
name = Z(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 0.10
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e]
type = list
name = Move E

[menu __mymain __control __move_e __move_10mm]
type = input
name = E(10.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E10 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_1mm]
type = input
name = E(01.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_01mm]
type = input
name = E(00.1):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E0.1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __home_all]
type = command
name = Home All
gcode = G28

[menu __mymain __control __home_x]
type = command
name = Home X
gcode = G28 X

[menu __mymain __control __home_y]
type = command
name = Home Y
gcode = G28 Y

[menu __mymain __control __home_z]
type = command
name = Home Z
gcode = G28 Z

[menu __mymain __control __disable]
type = command
name = Disable steppers
gcode = 
	M84
	M18

[menu __mymain __control __fanonoff]
type = input
enable = {'fan' in printer}
name = Fan: {'ON ' if menu.input else 'OFF'}
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 1
gcode = 
	M106 S{255 if menu.input else 0}

[menu __mymain __control __G32]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = G32
gcode = G32

[menu __mymain __control __QGL]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = QGL
gcode = QUAD_GANTRY_LEVEL

[menu __mymain __control __parkbed]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Bed
gcode = PARKBED

[menu __mymain __control __parkfront]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front
gcode = PARKFRONT

[menu __mymain __control __parkfrontlow]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front Low
gcode = PARKFRONTLOW

[menu __mymain __control __BEDFANSOFF]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansOff
gcode = BEDFANSOFF

[menu __mymain __control __BEDFANSFAST]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansFast
gcode = BEDFANSFAST

[menu __mymain __temp]
type = list
name = Temperature

[menu __mymain __temp __hotend0_target]
type = input
enable = {'extruder' in printer}
name = {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input = {printer.extruder.target}
input_min = 0
input_max = {printer.configfile.config.extruder.max_temp}
input_step = 1
gcode = M104 T0 S{'%.0f' % menu.input}

[menu __mymain __temp __hotbed_target]
type = input
enable = {'heater_bed' in printer}
name = {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
input = {printer.heater_bed.target}
input_min = 0
input_max = {printer.configfile.config.heater_bed.max_temp}
input_step = 1
gcode = M140 S{'%.0f' % menu.input}

[menu __mymain __temp __preheat]
type = list
enable = { not printer.idle_timeout.state == "Printing" }
name = Preheat

[menu __mymain __temp __preheat __preheat_pla]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = PLA - 200/60
gcode = 
	M190 S60
	M104 S200
	{ menu.exit() }

[menu __mymain __temp __cooldown]
type = list
name = Cooldown

[menu __mymain __temp __cooldown __all]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = Cooldown All
gcode = 
	M104 S0
	M140 S0
	{ menu.exit() }

[menu __mymain __temp __cooldown __hotend]
type = command
enable = {'extruder' in printer}
name = Cooldown HE
gcode = M104 S0

[menu __mymain __temp __cooldown __hotbed]
type = command
enable = {'heater_bed' in printer}
name = Cooldown HB
gcode = M140 S0

[menu __mymain __filament]
type = list
name = Filament

[menu __mymain __filament __load]
type = command
name = Load Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	LOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __unload]
type = command
name = Unload Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __feed]
type = input
name = Feed: {'%.1f' % menu.input}
input = 5
input_step = 0.1
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	M83
	G1 E{'%.1f' % menu.input} F60
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __settings]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Settings

[menu __mymain __settings __manual_mbl]
type = list
name = Manual MBL

[menu __mymain __settings __manual_mbl __zpos]
type = command
name = Z-Pos = {'%05.1f' % printer.gcode_move.position.z}

[menu __mymain __settings __manual_mbl __start]
type = command
name = Start Calibration
gcode = 
	G28
	BED_MESH_CALIBRATE METHOD=manual
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __step_down]
type = command
name = Step Down
gcode = 
	TESTZ Z=-.01

[menu __mymain __settings __manual_mbl __step_up]
type = command
name = Step Up
gcode = 
	TESTZ Z=.01

[menu __mymain __settings __manual_mbl __next]
type = command
name = Next
gcode = 
	ACCEPT
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __save]
type = command
name = Save & Restart
gcode = 
	SAVE_CONFIG
	FIRMWARE_RESTART

[menu __mymain __settings __manual_mbl __abort]
type = command
name = Abort
gcode = 
	ABORT

[menu __mymain __settings __pidtuning]
type = list
name = PID Tuning

[menu __mymain __settings __pidtuning __hotend_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == 'Printing') and ('extruder' in printer)}
name = Tune Hotend PID
gcode = PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1

[menu __mymain __settings __pidtuning __hotbed_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == "Printing") and ('heater_bed' in printer)}
name = Tune Hotbed PID
gcode = PID_CALIBRATE HEATER=heater_bed TARGET=60 WRITE_FILE=1

[menu __mymain __settings __pidtuning __save_config]
type = command
name = Save config
gcode = SAVE_CONFIG

[menu __mymain __settings __dump]
type = command
name = Dump Parameters
gcode = 
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{ action_respond_info("printer['%s'].%s = %s" % (name1, name2, printer[name1][name2])) }
	{% else %}
	{ action_respond_info("printer['%s'] = %s" % (name1, printer[name1])) }
	{% endfor %}
	{% endfor %}

[menu __mymain __settings __firmware_restart]
type = command
name = FW Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = FIRMWARE_RESTART

[menu __mymain __settings __host_restart]
type = command
name = Host Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = RESTART

[display]
menu_timeout = 60
menu_root = __mymain
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[menu __mymain]
type = list
name = Main Menu

[menu __mymain __babystep]
type = input
name = Babystep Z:{'%05.3f' % menu.input}
enable = { printer.idle_timeout.state == "Printing" }
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __printstart]
type = command
enable = {('virtual_sdcard' in printer) and not printer.print_stats.filename == "" and printer.idle_timeout.state == "Idle"}
name = Start Printing
gcode = 
	M24
	{ menu.exit() }

[menu __mymain __printpause]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Pause
gcode = 
	PAUSE
	{ menu.exit() }

[menu __mymain __printresume]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Resume
gcode = 
	RESUME
	{ menu.exit() }

[menu __mymain __printcancel]
type = command
enable = { printer.pause_resume.is_paused == true }
name = Cancel
gcode = 
	CANCEL_PRINT
	{ menu.exit() }

[menu __mymain __sdcard]
type = vsdlist
enable = {('virtual_sdcard' in printer) and printer.print_stats.filename == ""}
name = SD Card

[menu __mymain __filament __clean]
type = command
name = Clean Nozzle
gcode = 
	clean_nozzle

[menu __mymain __cooldown]
type = command
name = Cooldown
gcode = COOLDOWN

[menu __mymain __lightsoff]
type = command
name = Lights Off
gcode = light_off

[menu __mymain __lightsdim]
type = command
name = Lights Dim
gcode = light_dim

[menu __mymain __lightson]
type = command
name = Lights On
gcode = light_on

[menu __mymain __shutdown]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Shut down
gcode = SHUTDOWN

[delayed_gcode _menu_pi_shutdown]
gcode = 
	{action_emergency_stop("Shutdown from menu")}
	{action_call_remote_method("shutdown_machine")}

[menu __main __octoprint]
type = disabled

[menu __main __setup __calib __delta_calib_auto]
type = disabled

[menu __main __setup __calib __delta_calib_man]
type = disabled

[gcode_macro G32]
gcode = 
	SAVE_GCODE_STATE NAME=STATE_G32
	BED_MESH_CLEAR
	G90
	CG28
	Z_TILT_ADJUST
	PARKBED
	RESTORE_GCODE_STATE NAME=STATE_G32

[gcode_macro CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro XYCG28]
gcode = 
	{% if "xy" not in printer.toolhead.homed_axes %}
	G28 X Y
	{% endif %}

[gcode_macro ZCG28]
gcode = 
	{% if "z" not in printer.toolhead.homed_axes %}
	G28 Z
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	{% set s = params.S|float %}
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
	{% endif %}

[gcode_macro CALIBRATE_Z]
rename_existing = _BASE_CALIBRATE_Z
description = Perform the Z calibration using the physical Z endstop and the Klicky
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set mesh_ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% set mesh_center = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_center %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if V %}
	{ action_respond_info("Z Offset calibration") }
	{% endif %}
	M117 Z-Calibration..
	ATTACH_PROBE
	G1 X125 Y125 F8000
	{% if mesh_ready %}
	RESPOND MSG="Z calibration: a mesh is computed and ready, probing mesh center: {mesh_center}"
	_BASE_CALIBRATE_Z BED_POSITION={mesh_center}
	{% else %}
	RESPOND MSG="Z calibration: no mesh computed, probing default point"
	_BASE_CALIBRATE_Z
	{% endif %}
	DOCK_PROBE

[respond]

[gcode_macro SHUTDOWN]
gcode = 
	LCDRGB R=0 G=0 B=0                               ; Turn off LCD neopixels (see above for this macro)
	COOLDOWN                                              ; Shortcut to turn everything off (see above for this macro)
	{action_respond_info('action:poweroff')}          ; OctoPrint compatible host shutdown
	{action_call_remote_method("shutdown_machine")}   ; Moonraker compatible host shutdown

[gcode_macro REBOOT]
gcode = 
	{action_call_remote_method("reboot_machine")}

[gcode_macro _bot_data]
variable_lapse_video_size = 0
variable_lapse_filename = 'None'
variable_lapse_path = 'None'
gcode = 
	M118 Setting bot lapse variables

[gcode_shell_command backup_cfg]
command = sh /home/pi/klipper_config/scripts/myshellscript.sh
timeout = 30.
verbose = True

[gcode_macro BACKUP_CFG]
gcode = 
	RUN_SHELL_COMMAND CMD=backup_cfg

[gcode_macro COOLDOWN]
description = Shuts down the printer
gcode = 
	M84
	TURN_OFF_HEATERS
	M117
	LIGHT_OFF

[gcode_macro RESETSPEEDS]
gcode = 
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity}
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={printer.configfile.settings.printer.square_corner_velocity}

[gcode_macro BEEP]
gcode = 
	{% set i = params.I|default(1)|int %}           ; Iterations (number of times to beep).
	{% set dur = params.DUR|default(100)|int %}     ; Duration/wait of each beep in ms. Default 100ms.
	{% set freq = params.FREQ|default(2000)|int %}  ; Frequency in Hz. Default 2kHz.
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[delayed_gcode _CLEAR_DISPLAY]
gcode = 
	M117

[delayed_gcode _DELAY_SDCARD_RESET_FILE]
gcode = 
	SDCARD_RESET_FILE

[gcode_macro DIRECT_MOVE]
gcode = 
	{% set out_param = ["G0"] %}
	{% set _dummy = out_param.append("X%s" % params.X) if params.X %}
	{% set _dummy = out_param.append("Y%s" % params.Y) if params.Y %}
	{% set _dummy = out_param.append("Z%s" % params.Z) if params.Z %}
	{% set _dummy = out_param.append("E%s" % params.E) if params.E %}
	{% set _dummy = out_param.append("F%s" % params.F) if params.F %}
	{out_param|join(" ")}

[gcode_macro _PRINT_AR]
description = Helper: Action response
gcode = 
	{% if params.SHOW_LCD|default('false') == 'true' %} M117 {params.T} {% endif %}
	{action_respond_info(params.T)}

[gcode_macro M115]
description = Print host and mcu version
rename_existing = M115.1
gcode = 
	{% set out = ['mcu build version:'] %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% if name2 is in ['mcu_version'] %}
	{% set _dummy = out.append("%s: %s" % (name1, printer[name1][name2])) %}
	{% endif %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(out|join("\n"))}
	M115.1

[gcode_shell_command plot_graph]
command = bash /home/pi/klipper_config/scripts/plot_graphs.sh
timeout = 300.0
verbose = True

[gcode_macro bedfanvars]
variable_threshold = 100
variable_fast = 0.4
variable_slow = 0.3
gcode = 

[fan_generic BedFans]
pin = PD14
kick_start_time = 0.5

[gcode_macro BedFansSlow]
gcode = 
	{% set SLOW = printer["gcode_macro bedfanvars"].slow|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={SLOW}

[gcode_macro BedFansFast]
gcode = 
	{% set FAST = printer["gcode_macro bedfanvars"].fast|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={FAST}

[gcode_macro BedFansOff]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro SET_HEATER_TEMPERATURE]
rename_existing = _SET_HEATER_TEMPERATURE
gcode = 
	{% set HEATER = params.HEATER|default("None") %}
	{% set TARGET = params.TARGET|default(0)|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if HEATER|lower == "extruder" %}
	M104 S{TARGET}
	{% elif HEATER|lower == "heater_bed" %}
	M99140 S{TARGET}
	{% else %}
	{action_respond_info("Heater %s not supported" % HEATER)}
	{% endif %}
	{% if HEATER|lower == "heater_bed" %}
	{% if TARGET >= THRESHOLD %}
	BedFansSlow
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=1
	{% else %}
	BedFansOff
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=0
	{% endif %}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	{% set S = params.S|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if S >= THRESHOLD %}
	BedFansSlow
	{% else %}
	BedFansOff
	{% endif %}
	M140 {% for p in params
	%}{'%s%s' % (p, params[p])}{%
	endfor %}
	{% if S != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={S|int} MAXIMUM={S|int + 5}
	{% endif %}
	{% if S >= THRESHOLD %}
	BedFansFast
	{% endif %}

[gcode_macro M140]
rename_existing = M99140
gcode = 
	{% set S = params.S|float %}
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={S}

[gcode_macro TURN_OFF_HEATERS]
rename_existing = _TURN_OFF_HEATERS
gcode = 
	BedFansOff
	_TURN_OFF_HEATERS

[delayed_gcode bedfanloop]
gcode = 
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if printer.heater_bed.target >= THRESHOLD %}
	{% if printer.heater_bed.temperature|int >= (printer.heater_bed.target|int - 1) %}
	BedFansFast
	{% else %}
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=5
	{% endif %}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_sensor chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VT.430 " }
	~voron~
	{% endif %}

[z_calibration]
nozzle_xy_position = 143,256
switch_xy_position = 136,235
bed_xy_position = 125,125
switch_offset = .52
max_deviation = 1.0
speed = 200
probing_first_fast = true
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_probe

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 300
variable_move_accel = 10000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 257
variable_max_bed_x = 250
variable_z_endstop_x = 143
variable_z_endstop_y = 256
variable_docklocation_x = 181
variable_docklocation_y = 251
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 1000
variable_dockmove_x = 40
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 30
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff = 10
variable_override_homing = ''
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff = printer["gcode_macro _User_Variables"].home_backoff|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION X=0 Y=0 Z=0
	_KlickyDebug msg="homing_override toolhead too low, raising it by {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X G28 X0"
	G28 X0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% else %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro Z_TILT_ADJUST]
rename_existing = _Z_TILT_ADJUST
description = 
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Z Tilt Adjust") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_Z_TILT_ADJUST {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe
	G28 Z0

[gcode_macro HEATSOAK_CHAMBER]
description = Heatsoak chamber to a specific temperature with a timeout
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set MAXTIME = params.MAXTIME|default(15)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% for _ in range(1, MAXTIME) %}
	_WAIT_CHAMBER_TEMP TEMP={SETPOINT_TEMP}
	{% endfor %}
	{% if V %}
	RESPOND MSG="Chamber temperature OK !"
	{% endif %}

[gcode_macro _WAIT_CHAMBER_TEMP]
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set CURRENT_TEMP = printer["temperature_sensor chamber"].temperature|float %}
	{% if CURRENT_TEMP <= SETPOINT_TEMP %}
	RESPOND MSG="Heating up the chamber : {CURRENT_TEMP}/{SETPOINT_TEMP}"
	G4 P{60000 * 1}
	{% endif %}

[gcode_macro HEATSOAK_BED]
description = Heatsoak bed at specified temperature and wait for a specific amount of time
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|int %}
	{% set TIME = params.SOAKTIME|default(8)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	RESPOND MSG="Heating up bed..."
	{% endif %}
	M190 S{SETPOINT_TEMP}
	{% if TIME > 0 %}
	{% for _ in range(1, TIME) %}
	RESPOND MSG="Heatsoak..."
	G4 P{60000 * 1}
	{% endfor %}
	{% else %}
	RESPOND MSG="No heatsoak needed, continue"
	{% endif %}
	{% if V %}
	RESPOND MSG="Bed temperature OK"
	{% endif %}

[heater_fan hotend_fan]
pin = PA8
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[fan]
pin = PE5
kick_start_time = 0.5
off_below = 0.10

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed
max_power = 0.4

[fan_generic exhaust_fan]
pin = PD13
kick_start_time = 5.0

[gcode_macro _LOW_TEMP_CHECK]
description = Check the nozzle is at temperature and heat it if needed
gcode = 
	{% set T = params.T|default(230)|float %}
	{% if printer.extruder.target != 0 %}
	{% if printer.extruder.temperature < printer.extruder.target %}
	M109 S{printer.extruder.target|float}
	{% endif %}
	{% else %}
	{% if printer.extruder.target < T %}
	M109 S{T}
	{% endif %}
	{% endif %}

[gcode_macro CHANGE_FILAMENT]
description = Do a PAUSE, park the toolhead over the purge bucket and unload the filament
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=CHANGE_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	PAUSE
	PARKFRONTLOW
	TIP_SHAPING
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=CHANGE_FILAMENT_state

[gcode_macro UNLOAD_FILAMENT]
description = Basic unload of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=UNLOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G1 E-20 F3600
	G4 P3000
	G1 E{DISTANCE|float * -1} F3000
	RESTORE_GCODE_STATE NAME=UNLOAD_FILAMENT_state

[gcode_macro LOAD_FILAMENT]
description = Basic load of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=LOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G92 E0
	G1 E{DISTANCE|float} F200
	G1 E50 F150
	G92 E0
	RESTORE_GCODE_STATE NAME=LOAD_FILAMENT_state

[gcode_macro TIP_SHAPING]
description = Filament tip shaping sequence
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=TIP_SHAPING_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M82
	G92 E0
	G1 E2 F3600
	G1 E0 F3600
	G1 E3 F3600
	G1 E0 F3600
	G1 E4 F3600
	G1 E0 F3600
	RESTORE_GCODE_STATE NAME=TIP_SHAPING_state

[gcode_macro PRINT_START]
description = Machine heatup procedure before starting a print
gcode = 
	{% set BED_TEMP = params.BED|int %}
	{% set EXTRUDER_TEMP = params.HOTEND|int %}
	{% set SOAK = params.SOAK|default(0)|int %}
	{% set CHAMBER_TEMP = params.CHAMBER|default(0)|int %}
	{% set CHAMBER_MAXTIME = params.CHAMBER_MAXTIME|default(20)|int %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	{% set FL_SIZE = params.SIZE|default("0_0_0_0")|string %}
	_User_Variables
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	CLEAR_PAUSE
	BED_MESH_CLEAR
	G90
	M83
	LIGHT_ON
	M117 Homing                 ; display message
	status_homing
	G28
	PARKBED
	M117 Bed Soak
	status_heating
	{% if (SOAK > 0) and (printer.heater_bed.target < (BED_TEMP - 8)) %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME={SOAK}
	{% else %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME=0
	{% endif %}
	M117 Chamber Soak
	status_heating
	{% if CHAMBER_TEMP > 0 %}
	M109 S{EXTRUDER_TEMP - 50}
	HEATSOAK_CHAMBER TEMP={CHAMBER_TEMP} MAXTIME={CHAMBER_MAXTIME}
	{% endif %}
	M117 Extruder heating
	status_heating
	{% if V %}
	RESPOND MSG="Extruder temperature OK"
	{% endif %}
	G1 X15 Y250 Z20 F6000
	M109 S{EXTRUDER_TEMP}
	G4 P{60000 * 0.5}
	CLEAN_NOZZLE
	M117 Tilt..
	status_leveling
	{% if V %}
	RESPOND MSG="TILT..."
	{% endif %}
	Z_TILT_ADJUST
	M117 Nozzle cleaning
	status_cleaning
	CLEAN_NOZZLE
	CLEAN_NOZZLE
	{% if V %}
	RESPOND MSG="Auto Z calibration..."
	{% endif %}
	M117 Auto Z Cal
	status_calibrating_z
	ATTACH_PROBE_LOCK
	COMPUTE_MESH_PARAMETERS SIZE={FL_SIZE}
	CALIBRATE_Z
	M117 Adaptive Bed Mesh
	{% if V %}
	RESPOND MSG="Bed mesh measurement..."
	{% endif %}
	status_meshing
	ADAPTIVE_BED_MESH SIZE={FL_SIZE}
	DOCK_PROBE_UNLOCK
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "PLA" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "PETG" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.0750
	SET_GCODE_OFFSET Z_ADJUST=0.010 MOVE=1
	{% elif MATERIAL == "ABS" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "FLEX" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "PC" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "NYLON" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% endif %}
	M117 Printing...
	status_printing
	{% if V %}
	RESPOND MSG="Start printing !"
	{% endif %}
	G92 E0;
	G90
	G0 X5 Y5 F6000
	G0 Z0.4
	G91
	G1 X120 E30 F600;
	G1 Y1
	G1 X-120 E30 F600;
	G92 E0;
	G90
	G1 Z2.0 E-0.2 F600 ;move the platform down 15mm
	G92 E0 ;zero the extruded length again
	G1 Z5 F600
	G92 E0
	LIGHT_ON S=25
	status_printing
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1

[gcode_macro PRINT_END]
gcode = 
	{% set FILTER_TIME = params.FILTER_TIME|default(600)|int %}
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	M117 Done!
	status_ready
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	{% if printer.extruder.temperature > 120 %}
	G92 E0                         ; zero the extruder
	G1 E-12.0 F1800                 ; retract filament
	{% endif %}
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	M84
	BED_MESH_CLEAR
	RESETSPEEDS
	LIGHT_OFF
	_SD_PRINT_STATS
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "ABS" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "PC" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "NYLON" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% endif %}
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[delayed_gcode _STOP_FILTER]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro _ADAPTIVE_MESH_VARIABLES]
variable_ready = False
variable_do_mesh = False
variable_do_nominal = False
variable_mesh_min = 0,0
variable_mesh_max = 0,0
variable_mesh_center = 0,0
variable_probe_count = 0,0
variable_rri = 0
variable_algo = "bicubic"
gcode = 

[gcode_macro COMPUTE_MESH_PARAMETERS]
description = Compute the mesh parameters and store them for later use
gcode = 
	{% set xMinConf, yMinConf = printer["configfile"].config["bed_mesh"]["mesh_min"].split(',')|map('trim')|map('int') %}
	{% set xMaxConf, yMaxConf = printer["configfile"].config["bed_mesh"]["mesh_max"].split(',')|map('trim')|map('int') %}
	{% set xProbeCntConf, yProbeCntConf = printer["configfile"].config["bed_mesh"]["probe_count"].split(',')|map('trim')|map('int') %}
	{% set algo = printer["configfile"].config["bed_mesh"]["algorithm"]|lower %}
	{% set xMeshPPS, yMeshPPS = printer["configfile"].config["bed_mesh"]["mesh_pps"].split(',')|map('trim')|map('int') %}
	{% if params.SIZE is defined and params.SIZE != "0_0_0_0" %}
	{% set xMinSpec, yMinSpec, xMaxSpec, yMaxSpec = params.SIZE.split('_')|map('trim')|map('int') %}
	{% set margin = params.MARGIN|default(5)|int %}
	{% set xMin = [xMinConf, (xMinSpec - margin)]|max %}
	{% set xMax = [xMaxConf, (xMaxSpec + margin)]|min %}
	{% set yMin = [yMinConf, (yMinSpec - margin)]|max %}
	{% set yMax = [yMaxConf, (yMaxSpec + margin)]|min %}
	{% set xProbeCnt = ((xMax - xMin) * xProbeCntConf / (xMaxConf - xMinConf))|round(0, 'ceil')|int %}
	{% set yProbeCnt = ((yMax - yMin) * yProbeCntConf / (yMaxConf - yMinConf))|round(0, 'ceil')|int %}
	{% if xProbeCnt < 3 and yProbeCnt < 3 %}
	RESPOND MSG="Computed mesh parameters: none, bed mesh not needed"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={False}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% else %}
	{% set xProbeCnt = [3, xProbeCnt]|max %}
	{% set yProbeCnt = [3, yProbeCnt]|max %}
	{% if xProbeCnt % 2 == 0 %}
	{% set xProbeCnt = xProbeCnt + 1 %}
	{% endif %}
	{% if yProbeCnt % 2 == 0 %}
	{% set yProbeCnt = yProbeCnt + 1 %}
	{% endif %}
	{% if xMeshPPS != 0 or yMeshPPS != 0 %}
	{% set probeCntMin = [xProbeCnt, yProbeCnt]|min %}
	{% set probeCntMax = [xProbeCnt, yProbeCnt]|max %}
	{% if algo == "lagrange" and probeCntMax > 6 %}
	{% set algo = "bicubic" %}
	{% endif %}
	{% if algo == "bicubic" and probeCntMin < 4 %}
	{% if probeCntMax > 6 %}
	{% if xProbeCnt > yProbeCnt %}
	{% set yProbeCnt = 5 %}
	{% else %}
	{% set xProbeCnt = 5 %}
	{% endif %}
	{% else %}
	{% set algo = "lagrange" %}
	{% endif %}
	{% endif %}
	{% endif %}
	{% set rRefIndex = (((xProbeCnt * yProbeCnt) - 1) / 2)|int %}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_min = "%d,%d"|format(xMin, yMin) %}
	{% set mesh_max = "%d,%d"|format(xMax, yMax) %}
	{% set probe_count = "%d,%d"|format(xProbeCnt, yProbeCnt) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	RESPOND MSG="Computed mesh parameters: MESH_MIN={mesh_min} MESH_MAX={mesh_max} MESH_CENTER={mesh_center} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={False}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_min VALUE='"{mesh_min}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_max VALUE='"{mesh_max}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=probe_count VALUE='"{probe_count}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=rri VALUE={rRefIndex}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=algo VALUE='"{algo}"'
	{% endif %}
	{% else %}
	RESPOND MSG="Computed mesh parameters: none, going for a nominal bed mesh"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={True}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={True}

[gcode_macro ADAPTIVE_BED_MESH]
description = Perform a bed mesh, but only where and when it's needed
gcode = 
	{% set ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if ready %}
	_DO_ADAPTIVE_MESH
	{% else %}
	RESPOND MSG="Adaptive bed mesh: parameters not computed, automatically calling the COMPUTE_MESH_PARAMETERS macro prior to the mesh"
	COMPUTE_MESH_PARAMETERS {rawparams}
	M400
	_DO_ADAPTIVE_MESH
	{% endif %}

[gcode_macro _DO_ADAPTIVE_MESH]
gcode = 
	{% set do_mesh = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_mesh %}
	{% set do_nominal = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_nominal %}
	{% set mesh_min = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_min %}
	{% set mesh_max = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_max %}
	{% set probe_count = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].probe_count %}
	{% set rRefIndex = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].rri %}
	{% set algo = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].algo %}
	{% if do_mesh %}
	{% if do_nominal %}
	RESPOND MSG="Adaptive bed mesh: nominal bed mesh"
	BED_MESH_CALIBRATE
	{% else %}
	RESPOND MSG="Adaptive bed mesh: MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	BED_MESH_CALIBRATE MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}
	{% endif %}
	{% else %}
	RESPOND MSG="Adaptive bed mesh: no mesh to be done"
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={False}

[gcode_macro SEARCH_VARS]
description = Search for variables in the "printer" object from Klipper
gcode = 
	{% set search = params.S|lower %}
	{% set ns = namespace() %}
	{% for item in printer  %}
	{% if ' ' in item %}
	{% set ns.path = ['printer', "['%s']" % (item), ''] %}
	{% else %}
	{% set ns.path = ['printer.', item, ''] %}
	{% endif %}
	{% if search in ns.path|lower %}
	{ action_respond_info(ns.path|join) }
	{% endif %}
	{% if printer[item].items() %}
	{% for childkey, child in printer[item].items() recursive %}
	{% set ns.path = ns.path[:loop.depth|int + 1] %}
	{% if ' ' in childkey %}
	{% set null = ns.path.append("['%s']" % (childkey)) %}
	{% else %}
	{% set null = ns.path.append(".%s" % (childkey)) %}
	{% endif %}
	{% if child is mapping  %}
	{ loop(child.items()) }
	{% else %}
	{% if search in ns.path|lower %}
	{ action_respond_info("%s : %s" % (ns.path|join, child)) }
	{% endif %}
	{% endif %}
	{% endfor %}
	{% endif %}
	{% endfor %}

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	{% set TYPE = params.TYPE|default("")|string %}
	{% set BED_TEMP = params.BED_TEMP|default(110)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(240)|float %}
	{% set MATERIAL = params.MATERIAL|default("ABS")|string %}
	{% if TYPE=="" %}
	{action_respond_info("Please call this macro using TYPE= \"flow\" or \"pressure_advance\"")}
	{action_raise_error("not enough parameters to start a calibration!")}
	{% elif TYPE=="flow" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=130_130_170_170
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	{% elif TYPE=="pressure_advance" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=90_90_210_210
	PRESSURE_ADVANCE_CALIBRATION
	{% endif %}
	END_PRINT FILTER_TIME=0

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(0.93)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	M221 S{e_multiplier * 100}
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	G90
	M106 S{fan_speed * 255 / 100}
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	{% for perim_num in range(number_of_perimeters) %}
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	{% set do_raft = params.RAFT|default(1)|int %}
	{% set print_size      = params.SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	{% set fast_line_ratio_percent = 50 %}
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band - spacing_purge %}
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting Pressure Advance calibration print.")}
	{action_respond_info("")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button once the print starts exhibiting PA values that are obviously too high.")}
	{action_respond_info("")}
	{action_respond_info("PA of first band: %.4f" % pa_start)}
	{action_respond_info("PA of last band: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA increment per band: %.4f" % pa_increment)}
	{action_respond_info("Number of bands: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Inspect the printed model. "
	"Look at the top and bottom lines in each band, on the right side of the two vertical raft bars (where the print speeds change). "
	"Find the highest band from the bottom where the lines at its top still resemble the lines at its bottom, with no visible extrusion width irregularities. "
	"Your final Pressure Advance value would then be:"
	)}
	{action_respond_info("")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Update your [extruder] config section and set \"pressure_advance\" to the value you calculated.")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	{% for curr_band_num in range(1, num_bands + 1) %}
	{% set outer_loop = loop %}
	{% set curr_pa_value = pa_start + (curr_band_num - 1) * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro M486]
gcode = 
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[gcode_macro M701]
gcode = 
	LOAD_FILAMENT

[gcode_macro M702]
gcode = 
	UNLOAD_FILAMENT

[gcode_macro M125]
gcode = 
	PARK

[gcode_macro M900]
gcode = 
	{% set pa = params.K|float %}
	SET_PRESSURE_ADVANCE ADVANCE={pa}

[gcode_macro M204]
description = Set and limit acceleration to cfg value
rename_existing = M204.1
gcode = 
	{% set accel = params.S|float                      if 'S' in params and params.S|float > 0
	else [params.P|float,params.T|float]|min if 'P' in params and 'T' in params and
	params.P|float > 0 and params.T|float > 0 %}
	{% if accel is defined %}
	{% set lim_accel          = [accel,     printer.configfile.settings.printer.max_accel         ]|min %}
	{% set lim_accel_to_decel = [accel / 2, printer.configfile.settings.printer.max_accel_to_decel]|min %}
	SET_VELOCITY_LIMIT ACCEL={lim_accel} ACCEL_TO_DECEL={lim_accel_to_decel}
	{% else %}
	{action_respond_info("Invalid M204 command \"M204 %s\"" % rawparams)}
	{% endif %}

[gcode_macro M117]
rename_existing = M117.1
gcode = 
	{% if rawparams %}
	{% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
	SET_DISPLAY_TEXT MSG="{escaped_msg}"
	RESPOND TYPE=command MSG="{escaped_msg}"
	{% else %}
	SET_DISPLAY_TEXT
	{% endif %}

[sdcard_loop]

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[neopixel sb_leds]
pin = PB0
chain_count = 3
color_order = GRBW
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
initial_white = 0.0

[gcode_macro _sb_vars]
variable_colors = {
	'logo': {
	'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
	'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
	'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
	'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'printing': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	},
	'nozzle': {
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w':0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w':0.0},
	},
	'thermal': {
	'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
	}
	}
variable_logo_led_name = "sb_leds"
variable_logo_idx = "1"
variable_nozzle_led_name = "sb_leds"
variable_nozzle_idx = "2,3"
gcode = 

[gcode_macro _set_sb_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = params.LED|string %}
	{% set idx = (params.IDX|string).split(',') %}
	{% set transmit_last = params.TRANSMIT|default(1) %}
	{% for led_index in idx %}
	{% set transmit=transmit_last if loop.last else 0 %}
	set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
	{% endfor %}

[gcode_macro _set_sb_leds_by_name]
gcode = 
	{% set leds_name = params.LEDS %}
	{% set color_name = params.COLOR %}
	{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
	{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
	{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
	{% set transmit = params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}

[gcode_macro _set_logo_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro _set_nozzle_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro set_logo_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}

[gcode_macro set_nozzle_leds_on]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}

[gcode_macro set_nozzle_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}

[gcode_macro status_off]
gcode = 
	set_logo_leds_off transmit=0
	set_nozzle_leds_off

[gcode_macro status_ready]
gcode = 
	_set_sb_leds_by_name leds="logo" color="standby" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1

[gcode_macro status_busy]
gcode = 
	_set_sb_leds_by_name leds="logo" color="busy" transmit=0
	set_nozzle_leds_on

[gcode_macro status_heating]
gcode = 
	_set_sb_leds_by_name leds="logo" color="heating" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1

[gcode_macro status_leveling]
gcode = 
	_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
	set_nozzle_leds_on

[gcode_macro status_homing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="homing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_cleaning]
gcode = 
	_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
	set_nozzle_leds_on

[gcode_macro status_meshing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_calibrating_z]
gcode = 
	_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
	set_nozzle_leds_on

[gcode_macro status_printing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="printing" transmit=0
	set_nozzle_leds_on

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[filament_motion_sensor filament_sensor]
detection_length = 14.00
extruder = extruder
switch_pin = ^PG12
pause_on_runout = True
event_delay = 3.0
pause_delay = 0.5
insert_gcode = 
	M117 Insert Detected
runout_gcode = 
	M117 Runout Detected
	LCDRGB R=1 G=0 B=0
	BEEP I=12

[gcode_macro M600]
gcode = 
	LCDRGB R=0 G=1 B=0  ; Turn LCD green
	PAUSE                ; Pause

[pause_resume]

[display_status]

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set z = params.Z|default(10)|int %}                                                   ; z hop amount
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}                              ; set z hop variable for reference in resume macro
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}    ; set hotend temp variable for reference in resume macro
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0                                  ; disable filament sensor
	SAVE_GCODE_STATE NAME=PAUSE                                                          ; save current print position for resume
	BASE_PAUSE                                                                           ; pause print
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}       ; check that zhop doesn't exceed z max
	G91                                                                              ; relative positioning
	G1 Z{z} F900                                                                     ; raise Z up by z hop amount
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }                  ; if z max is exceeded, show message and set zhop value for resume to 0
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90                                                                                  ; absolute positioning
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000   ; park toolhead at front center
	SAVE_GCODE_STATE NAME=PAUSEPARK                                                      ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
	M104 S0                                                                              ; turn off hotend
	SET_IDLE_TIMEOUT TIMEOUT=43200                                                       ; set timeout to 12 hours
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	{% set e = params.E|default(2.5)|int %}
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1                          ; enable filament sensor
	RESETRGB                                                                    ; reset LCD color
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}  ; set timeout back to configured value
	{% if etemp > 0 %}
	M109 S{etemp|int}                                                        ; wait for hotend to heat back up
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100                     ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
	G91                                                                          ; relative positioning
	M83                                                                          ; relative extruder positioning
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900                                                ; prime nozzle by E, lower Z back down
	{% else %}
	G1 Z{zhop * -1} F900                                                     ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60                          ; restore position
	BASE_RESUME                                                                  ; resume print
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT
	RESETSPEEDS

[gcode_macro RESONANCES_TEST]
description = Run input shaper test
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	_CG28
	TURN_OFF_HEATERS
	M107
	{% if user.hw.chamber.fan %} M141 {% endif %}
	{% if user.hw.filter.ena %} _SET_FILTER {% endif %}
	_PRINT_AR T="INPUT SHAPER: Noise values, check if sensor is installed"
	MEASURE_AXES_NOISE
	_PRINT_AR T="INPUT SHAPER: Resonance Tests starting ..."
	TEST_RESONANCES AXIS=X
	TEST_RESONANCES AXIS=Y
	_PRINT_AR T="INPUT SHAPER: Resonance Tests done"
	_PRINT_AR T="INPUT SHAPER: Generate graph in backround"
	RUN_SHELL_COMMAND CMD=plot_graph

[gcode_macro DUMP_PARAMETERS]
description = Dump all Klipper parameters to terminal, helps find names and values of variables for use in macros
gcode = 
	{% set parameters = namespace(output = '') %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% set donotwant = ['bed_mesh','configfile'] %}
	{% if name1 is not in donotwant %}
	{% set param = "printer['%s'].%s = %s" % (name1, name2, printer[name1][name2]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endif %}
	{% else %}
	{% set param = "printer['%s'] = %s" % (name1, printer[name1]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(parameters.output)}

[gcode_macro TEST_SPEED]
gcode = 
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	{% set iterations = params.ITERATIONS|default(5)|int %}
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	{% set bound = params.BOUND|default(20)|int %}
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	SAVE_GCODE_STATE NAME=TEST_SPEED
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	G28
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	{% for i in range(iterations) %}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	G28
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro FEED_RATE_TEST]
gcode = 
	{% if printer.configfile.config.respond is not defined %}
	{action_raise_error("This gcode_macro requires the [respond] section in your printer.cfg")}
	{% endif %}
	{% set ns_test_steps = namespace(collector="", arr=[]) %}
	{% for char in params.TEST_STEPS|default("x_test,y_test,rect_test,diag_test")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% set ns_test_steps.arr = ns_test_steps.arr + [ns_test_steps.collector|string] %}
	{% set ns_test_steps.collector = "" %}
	{% else %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_speed_steps = namespace(collector="", arr=[]) %}
	{% for char in params.SPEED_STEPS|default("80.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% set ns_speed_steps.arr = ns_speed_steps.arr + [ns_speed_steps.collector|float] %}
	{% set ns_speed_steps.collector = "" %}
	{% else %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_distance_steps = namespace(collector="", arr=[]) %}
	{% for char in params.DISTANCE_STEPS|default("40.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% set ns_distance_steps.arr = ns_distance_steps.arr + [ns_distance_steps.collector|float] %}
	{% set ns_distance_steps.collector = "" %}
	{% else %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_accel_steps = namespace(collector="", arr=[]) %}
	{% for char in params.ACCEL_STEPS|default(printer.toolhead.max_accel|string)|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% set ns_accel_steps.arr = ns_accel_steps.arr + [ns_accel_steps.collector|int] %}
	{% set ns_accel_steps.collector = "" %}
	{% else %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set center_x_position = printer.toolhead.axis_maximum.x / 2 %}
	{% set center_y_position = printer.toolhead.axis_maximum.y / 2 %}
	{% set accel_steps = ns_accel_steps.arr %}
	{% set test_steps = ns_test_steps.arr %}
	{% set distance_steps = ns_distance_steps.arr %}
	{% set speed_steps = ns_speed_steps.arr %}
	SAVE_GCODE_STATE NAME=speed_testing_macro
	{% set testRunCounter = namespace(value=0) %}
	RESPOND PREFIX="Speed-Test - " MSG="Starting Speed testing with"
	RESPOND PREFIX="- " MSG="distance_steps={distance_steps}"
	RESPOND PREFIX="- " MSG="speed_steps={speed_steps}"
	RESPOND PREFIX="- " MSG="accel_steps={accel_steps}"
	RESPOND PREFIX="- " MSG="test_steps={test_steps}"
	RESPOND PREFIX="" MSG="--------------------"
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	G90
	G1 X{center_x_position} Y{center_y_position} Z25 F4000
	{% for distance_step in distance_steps %}
	{% for speed_step in speed_steps %}
	{% set speed_feedrate_step = speed_step * 60 %}
	{% for accel_step in accel_steps %}
	{% set testRunCounter.value = testRunCounter.value + 1 %}
	M204 S{accel_step}
	RESPOND PREFIX="Speed-Test - " MSG="Test-Run {testRunCounter.value} => distance: {distance_step} speed: {speed_step} acceleration: {accel_step}"
	{% for test_step in test_steps %}
	_{test_step|upper} FEEDRATE={speed_feedrate_step} DISTANCE={distance_step}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	RESTORE_GCODE_STATE NAME=speed_testing_macro

[gcode_macro _X_TEST]
description = Moves the head left/right
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _Y_TEST]
description = Moves the head forward/backward
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 y{distance} F{speed_feedrate}
	G1 y-{distance * 2} F{speed_feedrate}
	G1 y{distance} F{speed_feedrate}
	G90

[gcode_macro _RECT_TEST]
description = Moves the head in a rectangle
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x-{distance} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance * 2} F{speed_feedrate}
	G1 y{distance * 2} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _DIAG_TEST]
description = Moves the head diagonally. First spinning the stepper_x, then the stepper_y. (CoreXY)
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x-{distance * 2} y-{distance * 2} F{speed_feedrate}
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G1 x-{distance * 2} y{distance * 2} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G90

[gcode_macro _CIRCLE_TEST]
description = Moves the head in a circle twice.
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	{% if printer.configfile.config.gcode_arcs is not defined %}
	{action_raise_error("The circle test requires the [gcode_arcs] section in your printer.cfg")}
	{% endif %}
	{% for count in range(2) %}
	G2 I{distance} J{distance} F{speed_feedrate}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKREAR
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	CG28                               ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKBED
	G90                                ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro TOGGLE_BEEPER]
description = Toggle the printer beeper on and off.
gcode = 
	{% set beeper_state = printer.save_variables.variables.beeper_state|lower %}
	{% if printer['gcode_macro _USER_VARIABLE'].debug == 1 %}
	{action_respond_info('==== TOGGLE_BEEPER ====')}
	{action_respond_info("beeper_state: %s" % (beeper_state))}
	{action_respond_info('===============')}
	{% endif %}
	{% if beeper_state == "off" %}
	{action_respond_info('beeper is off, turning it on')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"on"'
	{% else %}
	{action_respond_info('beeper is on= turning it off')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"off"'
	{% endif %}
	SONG_SINGLE_BEEP

[gcode_macro SONG_SINGLE_BEEP]
gcode = 
	M300 S830.61 P137

[output_pin beeper]
pin = PE8
pwm = True
value = 0
shutdown_value = 0
cycle_time = 0.001

[gcode_macro M300]
gcode = 
	{% set S = params.S|default(1000)|int %} ; S sets the tone frequency
	{% set P = params.P|default(100)|int %} ; P sets the tone duration
	{% set L = 0.5 %} ; L varies the PWM on time, close to 0 or 1 the tone gets a bit quieter. 0.5 is a symmetric waveform
	{% if S <= 0 %} ; dont divide through zero
	{% set F = 1 %}
	{% set L = 0 %}
	{% elif S >= 10000 %} ;max frequency set to 10kHz
	{% set F = 0 %}
	{% else %}
	{% set F = 1/S %} ;convert frequency to seconds
	{% endif %}
	SET_PIN PIN=beeper VALUE={L} CYCLE_TIME={F} ;Play tone
	G4 P{P} ;tone duration
	SET_PIN PIN=beeper VALUE=0

[gcode_macro SONG_THUNDERSTRUCK]
gcode = 
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166

[gcode_macro SONG_AFRICA]
gcode = 
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P450
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P450
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P300
	M300 S2637 P225
	M300 S2637 P300
	M300 S2489 P300
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P600
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P600
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P150
	M300 S2489 P150
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P450
	M300 S2637 P300
	M300 S2637 P300
	M300 S2489 P225
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P900
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200

[gcode_macro SONG_STARWARS_IMP]
gcode = 
	M300 S1174 P401
	M300 S1174 P401
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P803

[gcode_macro SONG_ALLIWANT]
gcode = 
	M300 S1046 P333
	M300 S1318 P333
	M300 S1567 P333
	M300 S987 P166
	M300 S0 P41
	M300 S2093 P333
	M300 S0 P83
	M300 S0 P41
	M300 S987 P333
	M300 S880 P166
	M300 S0 P41
	M300 S1567 P333
	M300 S0 P83
	M300 S0 P41
	M300 S2349 P333
	M300 S2093 P333
	M300 S2093 P333
	M300 S987 P333
	M300 S2093 P166
	M300 S0 P41
	M300 S987 P333
	M300 S0 P83
	M300 S0 P41
	M300 S880 P166
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S880 P333
	M300 S2093 P333
	M300 S2349 P333
	M300 S2637 P333
	M300 S2349 P166
	M300 S2093 P333
	M300 S880 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S3135 P166
	M300 S2093 P333
	M300 S0 P166
	M300 S2349 P333
	M300 S2349 P166
	M300 S2349 P333
	M300 S0 P166
	M300 S1760 P166
	M300 S3135 P666
	M300 S880 P500
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P500
	M300 S1318 P166
	M300 S0 P333
	M300 S0 P166
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P333
	M300 S0 P166
	M300 S1318 P166
	M300 S0 P333
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S0 P666
	M300 S1760 P333
	M300 S880 P166
	M300 S880 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S880 P333
	M300 S0 P166
	M300 S2349 P166
	M300 S0 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S0 P166
	M300 S1760 P500
	M300 S2093 P333
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P166
	M300 S0 P333
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S2093 P500
	M300 S1046 P166
	M300 S1046 P166
	M300 S1174 P166
	M300 S1318 P166
	M300 S1396 P333

[gcode_macro SONG_MACGYVER]
gcode = 
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S2217 P300
	M300 S0 P150
	M300 S2959 P150
	M300 S3322 P300
	M300 S0 P150
	M300 S0 P150
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S1864 P150
	M300 S1864 P150
	M300 S1864 P150
	M300 S3322 P150
	M300 S0 P150
	M300 S3520 P150
	M300 S0 P300
	M300 S0 P300
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S0 P300
	M300 S2959 P150
	M300 S1864 P300
	M300 S3322 P300
	M300 S0 P300

[gcode_macro SONG_TAKEONME]
gcode = 
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300
	M300 S932 P150
	M300 S1661 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300

[gcode_macro SONG_DUCKTOY]
gcode = 
	M300 S2217 P240
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120

[gcode_macro SONG_LOONEY]
gcode = 
	M300 S2093 P428
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S880 P642
	M300 S2093 P214
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2489 P214
	M300 S2637 P642
	M300 S2637 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S880 P214
	M300 S2093 P214
	M300 S1567 P214
	M300 S932 P214
	M300 S880 P214
	M300 S1396 P214

[gcode_macro SONG_RICE_COOKER_DONE]
gcode = 
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3951.07 P250
	M300 S3135.96 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3135.96 P500

[gcode_macro Song_Futurama1]
gcode = 
	M300 S0 P2105
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S2637 P263
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S1975 P526
	M300 S1975 P263
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2959 P263

[gcode_macro Song_Futurama2]
gcode = 
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S0 P267
	M300 S1318 P133
	M300 S1318 P133
	M300 S1318 P267
	M300 S1244 P267
	M300 S1174 P267
	M300 S1174 P267
	M300 S1108 P267
	M300 S1108 P267

[gcode_macro Song_Mario]
gcode = 
	M300 S1046 P150
	M300 S1318 P150
	M300 S1567 P150
	M300 S2093 P150
	M300 S2637 P150
	M300 S3135 P400
	M300 S2637 P400
	M300 S1046 P150
	M300 S1244 P150
	M300 S1661 P150
	M300 S2093 P150
	M300 S2489 P150
	M300 S3322 P400
	M300 S2489 P400
	M300 S1174 P150
	M300 S1396 P150
	M300 S932 P150
	M300 S2349 P150
	M300 S2793 P150
	M300 S1864 P150
	M300 S0 P400
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S4186 P900

[gcode_macro Song_Mario2]
gcode = 
	M300 P214 S659
	M300 P210 S659
	M300 P219 S0
	M300 P210 S659
	M300 P219 S0
	M300 P214 S523
	M300 P357 S659
	M300 P72 S0
	M300 P357 S784
	M300 P500 S0
	M300 P357 S392
	M300 P500 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S523
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S880
	M300 P150 S784
	M300 P150 S880
	M300 P147 S784
	M300 P153 S0
	M300 P150 S988
	M300 P825 S784
	M300 P675 S0
	M300 P2001 S131
	M300 P250 S330
	M300 P245 S330
	M300 P756 S0
	M300 P250 S330
	M300 P250 S330
	M300 P125 S330
	M300 P125 S330
	M300 P250 S349
	M300 P245 S349
	M300 P756 S0
	M300 P250 S349
	M300 P250 S349
	M300 P125 S349
	M300 P125 S349
	M300 P250 S392
	M300 P245 S392

[gcode_macro Song_Doom]
gcode = 
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P57 S82
	M300 P78 S0
	M300 P142 S82
	M300 P135 S123
	M300 P135 S131
	M300 P28 S82
	M300 P106 S0
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P114 S131
	M300 P28 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P674 S117
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S123
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P667 S117
	M300 P7 S82
	M300 P35 S82
	M300 P92 S0
	M300 P7 S82
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131
	M300 P128 S131
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S117
	M300 P128 S117
	M300 P7 S82
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S123
	M300 P135 S131
	M300 P7 S82
	M300 P21 S82
	M300 P106 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P128 S165
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P135 S82
	M300 P114 S131
	M300 P21 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P7 S117
	M300 P667 S117
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131

[gcode_macro Song_Simpsons]
gcode = 
	M300 P563 S523
	M300 P375 S659
	M300 P375 S740
	M300 P188 S880
	M300 P563 S784
	M300 P375 S659
	M300 P375 S523
	M300 P188 S440
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P750 S392
	M300 P375 S0
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P188 S392
	M300 P563 S466
	M300 P188 S523
	M300 P188 S523
	M300 P188 S523
	M300 P375 S523

[gcode_macro Song_Centerfold]
gcode = 
	M300 P539 S494
	M300 P386 S587
	M300 P143 S494
	M300 P266 S440
	M300 P261 S392
	M300 P511 S392
	M300 P268 S330
	M300 P261 S392
	M300 P420 S392
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P245 S392
	M300 P273 S440
	M300 P557 S494
	M300 P73 S0
	M300 P393 S587
	M300 P148 S494
	M300 P273 S440
	M300 P261 S392
	M300 P539 S392
	M300 P34 S0
	M300 P261 S330
	M300 P261 S392
	M300 P268 S392
	M300 P130 S330
	M300 P148 S392
	M300 P268 S440
	M300 P284 S392
	M300 P273 S392
	M300 P273 S440
	M300 P534 S494
	M300 P34 S0
	M300 P402 S587
	M300 P143 S494
	M300 P261 S440
	M300 P266 S392
	M300 P518 S392
	M300 P284 S330
	M300 P284 S392
	M300 P277 S392
	M300 P155 S330
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P280 S392
	M300 P300 S440
	M300 P507 S494
	M300 P414 S587
	M300 P136 S494
	M300 P291 S440
	M300 P255 S392
	M300 P541 S392
	M300 P277 S330
	M300 P291 S392
	M300 P273 S392
	M300 P141 S330
	M300 P155 S392
	M300 P273 S440
	M300 P250 S392
	M300 P273 S392
	M300 P266 S440
	M300 P280 S494
	M300 P250 S587
	M300 P545 S587
	M300 P261 S587
	M300 P164 S587
	M300 P575 S659

[gcode_macro Song_GanstaParadise]
gcode = 
	M300 P19 S1047
	M300 P539 S104
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P37 S523
	M300 P142 S98
	M300 P6 S87
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P167 S494
	M300 P19 S98
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P31 S523
	M300 P155 S87
	M300 P6 S1047
	M300 P551 S65
	M300 P186 S392
	M300 P198 S784
	M300 P359 S0
	M300 P186 S523
	M300 P12 S1047
	M300 P545 S104
	M300 P186 S523
	M300 P235 S1047
	M300 P322 S0
	M300 P56 S523
	M300 P130 S98
	M300 P25 S1047
	M300 P532 S87
	M300 P186 S523
	M300 P204 S1047
	M300 P353 S0
	M300 P186 S494
	M300 P12 S988
	M300 P545 S98
	M300 P186 S494
	M300 P173 S988
	M300 P384 S0
	M300 P50 S523
	M300 P118 S87
	M300 P19 S65
	M300 P155 S1047
	M300 P402 S0
	M300 P186 S392
	M300 P130 S784
	M300 P613 S0
	M300 P173 S1047
	M300 P384 S0
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P186 S523
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P186 S494
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P186 S523
	M300 P180 S1047
	M300 P378 S0
	M300 P186 S392

[gcode_macro Song_Naruto]
gcode = 
	M300 P311 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P35 S0
	M300 P150 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P92 S0
	M300 P309 S740
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P91 S0
	M300 P299 S587
	M300 P150 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P60 S220
	M300 P92 S0
	M300 P309 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P30 S0
	M300 P155 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P90 S0
	M300 P311 S880
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P84 S0
	M300 P302 S220
	M300 P155 S220
	M300 P60 S220
	M300 P87 S0
	M300 P60 S220
	M300 P91 S0
	M300 P60 S220
	M300 P90 S0
	M300 P82 S659
	M300 P229 S1047
	M300 P151 S196
	M300 P60 S196
	M300 P91 S0
	M300 P56 S196
	M300 P91 S0
	M300 P61 S196
	M300 P84 S0
	M300 P271 S1047
	M300 P30 S0
	M300 P155 S1175
	M300 P60 S196
	M300 P87 S0
	M300 P151 S1047
	M300 P60 S196
	M300 P90 S0
	M300 P311 S988
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P113 S880
	M300 P34 S0
	M300 P118 S784
	M300 P34 S0
	M300 P264 S740
	M300 P30 S0
	M300 P153 S784
	M300 P149 S82
	M300 P267 S880
	M300 P34 S0
	M300 P163 S988
	M300 P148 S82
	M300 P151 S82
	M300 P151 S98
	M300 P147 S92

[gcode_macro Song_StillAlive]
gcode = 
	M300 P511 S0
	M300 P247 S440
	M300 P250 S466
	M300 P265 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S659
	M300 P247 S587
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S523
	M300 P247 S523
	M300 P249 S262
	M300 P250 S523
	M300 P250 S262
	M300 P254 S440
	M300 P259 S466
	M300 P269 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S784
	M300 P247 S698
	M300 P247 S659
	M300 P250 S587
	M300 P265 S587
	M300 P248 S659
	M300 P247 S698
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S784
	M300 P250 S880
	M300 P265 S932
	M300 P248 S932
	M300 P247 S880
	M300 P249 S349
	M300 P249 S784
	M300 P247 S349
	M300 P247 S698
	M300 P250 S784
	M300 P265 S880
	M300 P248 S880
	M300 P247 S784
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S698
	M300 P247 S698
	M300 P249 S659
	M300 P249 S220
	M300 P247 S659
	M300 P247 S740
	M300 P250 S740
	M300 P513 S220
	M300 P247 S740
	M300 P249 S587
	M300 P249 S494
	M300 P247 S587
	M300 P247 S740
	M300 P250 S587
	M300 P265 S440

[gcode_macro Song_OnlineSong]
gcode = 
	M300 P699 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P1716 S415
	M300 P318 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P2097 S415

[gcode_macro _ADD_PRINT_TIME]
description = Helper: Store print time values in variables
gcode = 
	{% set time = printer.print_stats.total_duration %}
	{% set filament = printer.print_stats.filament_used|float %}
	{% set filtertime = time if printer['gcode_macro PRINT_START'].var.filter else 0 %}
	{% if not printer.save_variables.variables.print_stats %}
	{% set print_stats = {'time': {'total': time, 'service': time, 'filter': filtertime}, 'filament': filament}%}
	{% else %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'total':(print_stats.time.total + time)|int}) %}
	{% set _dummy = print_stats.time.update({'service':(print_stats.time.service + time)|int}) %}
	{% set _dummy = print_stats.time.update({'filter':(print_stats.time.filter + filtertime)|int}) %}
	{% set _dummy = print_stats.update({'filament':(print_stats.filament + filament)|float}) %}
	{% endif %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"

[gcode_macro _DISPLAY_PRINT_TIME]
description = Helper: Print actual stored print time
gcode = 
	{% set totaltime = params.SECONDS|int if 'SECONDS' in params|upper
	else printer.save_variables.variables.print_stats.time.total %}
	{% set prefix = params.PREFIX|default('Total') %}
	{% set h,m,s = (totaltime / 3600)|int, ((totaltime / 60) % 60)|int, (totaltime % 60)|int %}
	{action_respond_info("Print time %s %d:%02d:%02d" % (prefix,h,m,s))}
	M117 {prefix} {h}:{'%02d' % m}:{'%02d' % s}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10

[gcode_macro _SD_PRINT_STATS]
description = Helper: Print statistic of last print
gcode = 
	{% set PT = printer.print_stats.print_duration %}
	{% set Ph,Pm,Ps = (PT / 3600)|int, ((PT / 60) % 60)|int, (PT % 60)|int %}
	{% set TT = printer.print_stats.total_duration %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set Fil = printer.print_stats.filament_used|float / 1000.0 %}
	{action_respond_info("Statistic of last Print (%s):
	Name: %s
	Filament: %.4fm
	Print Time: %d:%02d:%02d
	Total Time: %d:%02d:%02d" %
	(params.R, printer.print_stats.filename, Fil, Ph, Pm, Ps, Th, Tm, Ts))}

[gcode_macro _SD_PRINTER_STATS]
description = Helper: Print statistic of printer
gcode = 
	{% set ST = printer.save_variables.variables.print_stats.time.service %}
	{% set Sh,Sm,Ss = (ST / 3600)|int, ((ST / 60) % 60)|int, (ST % 60)|int %}
	{% set TT = printer.save_variables.variables.print_stats.time.total %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set FT = printer.save_variables.variables.print_stats.time.filter %}
	{% set Fh,Fm,Fs = (FT / 3600)|int, ((FT / 60) % 60)|int, (FT % 60)|int %}
	{% set Fil = printer.save_variables.variables.print_stats.filament|float / 1000.0 %}
	{action_respond_info("Printer Statistics:
	Total Print Time: %d:%02d:%02d
	Total Filament used: %.4fm
	Filter use time: %d:%02d:%02d
	Time since last Service: %d:%02d:%02d" %
	(Th, Tm, Ts, Fil, Fh, Fm, Fs, Sh, Sm, Ss))}
	_CHECK_FILTER

[gcode_macro _CHECK_FILTER]
description = Helper: Print filter exchange warning
gcode = 
	{% if printer['gcode_macro _USER_VARIABLE'].hw.filter.ena and
	printer.save_variables.variables.print_stats %}
	{% set Fh = (printer.save_variables.variables.print_stats.time.filter / 3600)|int %}
	{% if Fh >= printer['gcode_macro _USER_VARIABLE'].peripheral.filter.warning %}
	M117 Change Filter!
	{action_respond_info("Change Filter material at Micro!")}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10
	{% endif %}
	{% endif %}

[gcode_macro RST_FILTER]
description = Reset Nevermore interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'filter': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Flter used time reseted to zero")}
	{% endif %}

[gcode_macro RST_SERVICE]
description = Reset Service interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'service': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Time since last service reseted to zero")}
	{% endif %}

[save_variables]
filename = /home/pi/klipper_config/.variables.stb

[delayed_gcode _INIT]
initial_duration = 1
gcode = 
	_USER_VARIABLE
	_CHECK_CONSITENT
	_EXECUTE_AT_INIT

[gcode_macro _EXECUTE_AT_INIT]
description = Helper: Everything that should run at klipper start
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% if printer.save_variables.variables.filament_sensor %} _RESTORE_FILAMENT_SENSOR {% endif %}
	{% if user.hw.filter.ena %} _CHECK_FILTER {% endif %}
	{% if user.hw.display.ena %} UPDATE_DELAYED_GCODE ID=_DISPLAY_INIT DURATION=2 {% endif %}
	_PRINT_AR T="Klipper INIT done"

[gcode_macro _CHECK_CONSITENT]
description = Helper: Check that some criterias are meet in the printer.cfg
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% set text = ["CONFIG: ERROR"] %}
	{% if user.run is not defined %}
	{% set _dummy = text.append("_USER_VARIABLE macro missing") %}
	{% elif not user.run %}
	{% set _dummy = text.append("_USER_VARIABLE macro not executed") %}
	{% endif %}
	{% if 'save_variables' not in printer %}
	{% set _dummy = text.append("[save_variables] missing") %}
	{% endif %}
	{% if 'virtual_sdcard' not in printer %}
	{% set _dummy = text.append("[virtual_sdcard] missing") %}
	{% endif %}
	{% if text|length > 1 %}
	{action_respond_info(text|join("\n"))}
	{% endif %}

[gcode_macro _USER_VARIABLE]
description = Helper: Contains User defined printer variables
variable_hw = {}
variable_homing = {}
variable_z_hop = 0
variable_speed = {}
variable_probe = {}
variable_park = {}
variable_filament = {}
variable_purge = {}
variable_print_start = {}
variable_unload_sd = False
variable_prime = {}
variable_respond = {}
variable_peripheral = {}
variable_run = False
gcode = 
	{% set user_z_endstop_xy = [143,256] %}
	{% set user_z_endstop_hop = 7.5 %}
	{% set user_z_home_current = 0.35 %}
	{% set user_home_accel = 1200 %}
	{% set user_bed_y_offset = 7 %}
	{% set user_z_hop_speed = 15 %}
	{% set user_retract_speed = 30 %}
	{% set user_travel_speed = 300 %}
	{% set user_probe_dock_speed = 50 %}
	{% set user_filament_load_speed = 50 %}
	{% set user_wipe_speed = 200 %}
	{% set user_prime_speed = 25 %}
	{% set user_probe_dock_pos = [181,251] %}
	{% set user_probe_delta_x = 30 %}
	{% set user_probe_delta_y = -30 %}
	{% set user_z_probe_hop = 15.5 %}
	{% set user_park_xy_delta = 25 %}
	{% set user_park_z_max_delta = 40 %}
	{% set user_park_z_min = 30 %}
	{% set user_park_pause_z_delta = 2.0 %}
	{% set user_park_at_cancel = true %}
	{% set user_extruder_min_add = 30 %}
	{% set user_load_distance = 90 %}
	{% set user_load_extrude = 50 %}
	{% set user_unload_distance = 75 %}
	{% set user_retract_end = 2 %}
	{% set user_retract_pause = 1 %}
	{% set user_brush_pos = 'left' %}
	{% set user_brush_x_middle = 52 %}
	{% set user_brush_x_width = 45 %}
	{% set user_brush_y_start = 256 %}
	{% set user_wipe_z = 0.5 %}
	{% set user_wipe_cnt = 5 %}
	{% set user_z_purge = 2.5 %}
	{% set user_print_start_bed_up = 10 %}
	{% set user_print_start_ival = 1 %}
	{% set user_print_start_extruder_time = 0.5 %}
	{% set user_print_start_bed_time = 0.5 %}
	{% set user_print_start_prime_mult = 2 %}
	{% set user_unload_sd = True %}
	{% set user_prime_start_xy = [5.0,30.0] %}
	{% set user_prime_z = 0.2 %}
	{% set user_prime_dir = 'Y+' %}
	{% set user_prime_spacing = 0.4 %}
	{% set user_prime_length = 220 %}
	{% set user_prime_seg = 11 %}
	{% set user_prime_extrude_per_seg = 2 %}
	{% set user_respond_set_z_current = 0 %}
	{% set user_respond_set_acc = 0 %}
	{% set user_respond_probe_action = 1 %}
	{% set user_respond_layer = 0 %}
	{% set user_filter_on = 0 %}
	{% set user_filter_use_time = 0 %}
	{% set user_vent_on = 0 %}
	{% set user_caselight_on = 0.2 %}
	{% set user_fan_run_after_print = 0 %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set cfg_endstop_z_offset = printer.configfile.settings.stepper_z.position_endstop|default(0.0)|float %}
	{% set hw_dic = {'display'       : {'ena' : True if 'neopixel neo_display' in printer.configfile.settings
	else False},
	'chamber'       : {'type': 'sensor' if 'temperature_sensor chamber' in printer.configfile.settings
	else 'fan'    if 'temperature_fan chamber' in printer.configfile.settings
	else 'none'},
	'caselight'     : {'ena' : True if 'output_pin caselight' in printer.configfile.settings
	else False},
	'filter'        : {'ena' : True if 'fan_generic filter' in printer.configfile.settings
	else False},
	'runout'        : {'type': 'switch' if 'filament_switch_sensor runout' in printer.configfile.settings
	else 'motion' if 'filament_motion_sensor runout' in printer.configfile.settings
	else 'file'   if 'save_variables' in printer and filament_loaded in printer.save_variables.variables
	else 'none'},
	'relay'         : {'ena' : True if 'output_pin extruder_relay' in printer.configfile.settings and
	'output_pin heater_bed_relay' in printer.configfile.settings
	else False},
	'auto_z_offset' : {'type': 'z_calib+flexplate' if 'z_calibration' in printer and 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'z_calib'           if 'z_calibration' in printer
	else 'flexplate'         if 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'none'},
	'mag_probe'     : {'ena' : True if printer['gcode_macro _MAG_PROBE'] is defined or 'dockable_probe' in printer
	else False},
	'endstop_temp'  : {'ena' : True if 'temperature_sensor endstop' in printer.configfile.settings
	else False}}%}
	{% set _dummy = hw_dic.chamber.update({'ena': True if hw_dic.chamber.type != 'none' else False}) %}
	{% set _dummy = hw_dic.chamber.update({'fan': True if hw_dic.chamber.type == 'fan' else False}) %}
	{% set _dummy = hw_dic.runout.update({'ena': True if hw_dic.runout.type != 'none' else False}) %}
	{% set _dummy = hw_dic.runout.update({'sensor': True if hw_dic.runout.type == 'switch' or hw_dic.runout.type == 'motion'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'ena': True if hw_dic.auto_z_offset.type != 'none' else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'auto': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'z_calib'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'manu': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'flexplate'
	else False}) %}
	{% set bed = {'min': {'x': min.x, 'y': min.y                    , 'z': 0    },
	'max': {'x': max.x, 'y': max.y - user_bed_y_offset, 'z': max.z}} %}
	{% set calc_center = {'x': (bed.max.x - bed.min.x) / 2,
	'y': (bed.max.y - bed.min.y) / 2,
	'z': (bed.max.z - bed.min.z) / 2} %}
	{% set calc_park = {'min': {'x': bed.min.x + user_park_xy_delta,
	'y': bed.min.y + user_park_xy_delta,
	'z': bed.min.z + user_park_z_min},
	'max': {'x': bed.max.x - user_park_xy_delta,
	'y': bed.max.y - user_park_xy_delta,
	'z': bed.max.z - user_park_z_max_delta}} %}
	{% set calc_z_endstop_z = cfg_endstop_z_offset|round(0, 'ceil') + 1.0 if cfg_endstop_z_offset > 0 else 1.0 %}
	{% set calc_z_hop = user_z_probe_hop if hw_dic.mag_probe.ena and user_z_probe_hop > user_z_endstop_hop
	else user_z_endstop_hop %}
	{% set calc_brush = {'start': user_brush_x_middle - user_brush_x_width / 2,
	'end'  : user_brush_x_middle + user_brush_x_width / 2} %}
	{% set calc_purge = {'x': (min.x + calc_brush.start) / 2 if user_brush_pos|lower == 'left'
	else max.x - (max.x - calc_brush.end) / 2,
	'y': max.y} %}
	{% set calc_wipe = {'start': {'x': calc_brush.start if user_brush_pos|lower == 'left'
	else calc_brush.end,
	'y': user_brush_y_start},
	'end'  : {'x': calc_brush.end if user_brush_pos|lower == 'left'
	else calc_brush.start,
	'y': max.y}} %}
	{% set homing_dic = {'z_endstop': {'x':user_z_endstop_xy[0], 'y':user_z_endstop_xy[1], 'z':calc_z_endstop_z, 'hop':user_z_endstop_hop},
	'z_current': user_z_home_current,
	'accel'    : user_home_accel} %}
	{% set purge_dic = {'purge' : {'x':calc_purge.x, 'y':calc_purge.y, 'z':user_z_purge},
	'wipe'  : {'start'  : {'x': calc_wipe.start.x, 'y': calc_wipe.start.y, 'z':user_wipe_z},
	'end'    : {'x': calc_wipe.end.x,   'y': calc_wipe.end.y,   'z':user_wipe_z},
	'offset' : (calc_wipe.end.y - calc_wipe.start.y) / user_wipe_cnt,
	'cnt'    : user_wipe_cnt}} %}
	{% set probe_dic = {'dock'        : {'x'    : user_probe_dock_pos[0],
	'y'    : user_probe_dock_pos[1] + user_probe_delta_y},
	'store'       : {'x'    : user_probe_dock_pos[0] + user_probe_delta_x,
	'y'    : user_probe_dock_pos[1]}} %}
	{% set speed_dic = {'z_hop'   : (user_z_hop_speed * 60),
	'retract' : (user_retract_speed * 60),
	'travel'  : (user_travel_speed * 60),
	'dock'    : (user_probe_dock_speed * 60),
	'load'    : (user_filament_load_speed * 60),
	'wipe'    : (user_wipe_speed * 60),
	'prime'   : (user_prime_speed * 60)} %}
	{% set park_dic = {'bed'           : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_park.min.z},
	'center'        : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_center.z},
	'front'         : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.max.z},
	'frontlow'      : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.min.z},
	'rear'          : {'x': calc_park.min.x, 'y': calc_park.max.y, 'z': calc_park.max.z},
	'pause'         : {'x': calc_purge.x,    'y': calc_purge.y,   'dz': user_park_pause_z_delta},
	'park_at_cancel': user_park_at_cancel} %}
	{% set filament_dic = {'load_distance'   : user_load_distance,
	'load_extrude'    : user_load_extrude,
	'unload_distance' : user_unload_distance,
	'retract'         : {'end'   : user_retract_end,
	'pause' : user_retract_pause,
	'cancel': user_retract_end - user_retract_pause}} %}
	{% set prime_dic = {'pos'             : {'x':user_prime_start_xy[0], 'y':user_prime_start_xy[1], 'z':user_prime_z},
	'dir'             : user_prime_dir,
	'spacing'         : user_prime_spacing,
	'length_per_seg'  : user_prime_length / user_prime_seg,
	'seg'             : user_prime_seg,
	'extrude_per_seg' : user_prime_extrude_per_seg} %}
	{% set print_start_dic = {'bed_up'     : user_print_start_bed_up|float|round(1),
	'ival'       : user_print_start_ival|int,
	'time'       : {'extruder' : (user_print_start_extruder_time * 60)|int,
	'bed'      : (user_print_start_bed_time * 60)|int},
	'prime_mult' : user_print_start_prime_mult|float} %}
	{% set respond_dic = {'z_current'    : user_respond_set_z_current,
	'acc'          : user_respond_set_acc,
	'probe_action' : user_respond_probe_action,
	'layer'        : user_respond_layer} %}
	{% set peripheral_dic =  {'filter'     : {'on_val'          : user_filter_on,
	'warning'         : user_filter_use_time,
	'run_after_print' : (user_fan_run_after_print * 60)},
	'vent'      : {'on_val'          : user_vent_on,
	'run_after_print' : ((user_fan_run_after_print * 60) + 5)},
	'caselight' : {'on_val' : user_caselight_on}} %}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=hw VALUE="{hw_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=homing VALUE="{homing_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=z_hop VALUE={calc_z_hop}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=speed VALUE="{speed_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=probe VALUE="{probe_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=park VALUE="{park_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=filament VALUE="{filament_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=purge VALUE="{purge_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=print_start VALUE="{print_start_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=unload_sd VALUE={user_unload_sd}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=prime VALUE="{prime_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=respond VALUE="{respond_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=peripheral VALUE="{peripheral_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=run VALUE=True

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	G90
	G1 X{mid_x - size / 2} Y{mid_y - size / 2} Z{z_height} F{feedrate_travel}
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G1 X{mid_x + size / 2} F{curr_speed}
	G1 Y{mid_y + size / 2} F{curr_speed}
	G1 X{mid_x - size / 2} F{curr_speed}
	G1 Y{mid_y - size / 2} F{curr_speed}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=VIBRATIONS
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[neopixel lcd]
pin = EXP1_6
chain_count = 3
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
color_order = RGB

[gcode_macro LCDRGB]
gcode = 
	{% set r = params.R|default(1)|float %}
	{% set g = params.G|default(1)|float %}
	{% set b = params.B|default(1)|float %}
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=3

[gcode_macro RESETRGB]
gcode = 
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=3

[delayed_gcode SETDISPLAYNEOPIXEL]
initial_duration = 1
gcode = 
	RESETRGB

[exclude_object]

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_2B001000105053424E363620-if00

[virtual_sdcard]
path = /home/pi/gcode_files

[gcode_arcs]
resolution = 0.1

[idle_timeout]
timeout = 2700

[printer]
kinematics = corexy
max_velocity = 500
max_accel = 10000
max_z_velocity = 15
max_z_accel = 50
square_corner_velocity = 8.0

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 70.8
shaper_type_y = mzv
shaper_freq_y = 58.2

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345]
cs_pin = rpi:None

[resonance_tester]
accel_chip = adxl345
probe_points = 
	125, 125, 5

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG6
position_min = 0
position_endstop = 247
position_max = 247
homing_speed = 80
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG9
position_min = 0
position_endstop = 257
position_max = 257
homing_speed = 60
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG10
position_max = 250
position_min = -2.5
homing_speed = 10.0
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = -0.369

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = PC1
enable_pin = !PA0
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE6
dir_pin = !PA14
enable_pin = !PE0
rotation_distance = 5.613
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PF4
min_temp = 0
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
max_extrude_only_distance = 200
pressure_advance = 0.04
pressure_advance_smooth_time = 0.040
control = pid
pid_kp = 29.726
pid_ki = 3.539
pid_kd = 62.424

[tmc2209 extruder]
uart_pin = PD3
interpolate = false
run_current = 0.55
sense_resistor = 0.110
stealthchop_threshold = 0

[verify_heater extruder]
max_error = 120
check_gain_time = 20
hysteresis = 5
heating_gain = 2

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.68
min_temp = 0
max_temp = 120
control = pid
pid_kp = 38.757
pid_ki = 1.485
pid_kd = 252.888

[verify_heater heater_bed]
max_error = 120
check_gain_time = 90
hysteresis = 5
heating_gain = 2

[probe]
pin = PG15
x_offset = 0
y_offset = 19.75
z_offset = 6.42
speed = 10
lift_speed = 25
samples = 3
samples_result = median
sample_retract_dist = 0.8
samples_tolerance = 0.007
samples_tolerance_retries = 10

[z_tilt]
z_positions = 
	-46, 20
	125, 313
	296, 20
points = 
	30, 5
	125, 195
	220, 5
speed = 350
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075

[bed_mesh]
speed = 350
horizontal_move_z = 10
mesh_min = 40,40
mesh_max = 210,210
fade_start = 0.6
fade_end = 10.0
probe_count = 9,9
algorithm = bicubic
relative_reference_index = 12
mesh_pps = 2,2

[output_pin light]
pin = PB10
pwm = true
shutdown_value = 0
value = 100
scale = 100
cycle_time = 0.010

[gcode_macro light_off]
gcode = 
	set_pin pin=light value=0

[gcode_macro light_dim]
gcode = 
	set_pin pin=light value=25

[gcode_macro light_on]
gcode = 
	{% set S = params.S|default(100)|float %}
	set_pin pin=light value={S}

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
max_temp = 100

[temperature_sensor chamber]
sensor_type = Generic 3950
sensor_pin = PF5
min_temp = 0
max_temp = 75
gcode_id = chamber
=======================
Loaded MCU 'mcu' 105 commands (v0.10.0-477-g55d1c372 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
Configured MCU 'mcu' (1024 moves)
Loaded MCU 'rpi' 111 commands (v0.10.0-571-g97a5b39a / gcc: (Raspbian 8.3.0-6+rpi1) 8.3.0 binutils: (GNU Binutils for Raspbian) 2.31.1)
MCU 'rpi' config: PCA9685_MAX=4096 ADC_MAX=4095 PWM_MAX=32768 CLOCK_FREQ=50000000 MCU=linux STATS_SUMSQ_BASE=256
Configured MCU 'rpi' (1024 moves)
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.11.0-41-g9b60daf6'
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
webhooks client 1965515240: {'program': 'Moonraker', 'version': 'v0.7.1-783-gf7d8af6'}
=============== Log rollover at Wed Dec 28 05:39:40 2022 ===============
action:poweroff
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.11.0-41-g9b60daf6'
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Wed Dec 28 05:40:03 2022 (1672224003.6 26.3)
===== Config file =====
[gcode_shell_command hello_world]
command = echo hello world
timeout = 2.
verbose = True

[gcode_macro HELLO_WORLD]
gcode = 
	RUN_SHELL_COMMAND CMD=hello_world

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro clean_nozzle]
variable_location_bucket_rear = True
variable_enable_purge = False
variable_purge_len = 10
variable_purge_spd = 150
variable_purge_temp_min = 200
variable_purge_ret = 11
variable_ooze_dwell = 2
variable_brush_top = 0.3
variable_clearance_z = 5
variable_wipe_qty = 3
variable_prep_spd_xy = 3000
variable_prep_spd_z = 300
variable_wipe_spd_xy = 5000
variable_brush_start = 30
variable_brush_width = 45
variable_brush_front = 0
variable_brush_depth = 0
variable_bucket_left_width = 25
variable_bucket_right_width = 25
variable_bucket_gap = 22
variable_bucket_start = 0
variable_bucket_pos = 1
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	SAVE_GCODE_STATE NAME=clean_nozzle
	G90
	{% set Ry = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% if enable_purge %}
	SET_GCODE_VARIABLE MACRO=clean_nozzle VARIABLE=bucket_pos VALUE={(range(2) | random)}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	{% if location_bucket_rear %}
	G1 Y{Ry} F{prep_spd_xy}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)} F{prep_spd_xy}
	{% endif %}
	G1 X{bucket_start + (bucket_left_width / (2 - bucket_pos)) + (bucket_pos * bucket_gap) + (bucket_pos * (bucket_right_width / 2))}
	{% if printer.extruder.temperature >= purge_temp_min %}
	M83      ; relative mode
	G1 E{purge_len} F{purge_spd}
	G1 E-{purge_ret} F{purge_spd * 5}
	G4 P{ooze_dwell * 1000}
	G92 E0   ; reset extruder
	{% endif %}
	{% endif %}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{brush_start + (brush_width * bucket_pos)} F{prep_spd_xy}
	{% if location_bucket_rear %}
	G1 Y{Ry}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)}
	{% endif %}
	G1 Z{brush_top} F{prep_spd_z}
	{% for wipes in range(1, (wipe_qty + 1)) %}
	G1 X{brush_start + (brush_width * (1 - bucket_pos))} F{wipe_spd_xy}
	G1 X{brush_start + (brush_width * bucket_pos)} F{wipe_spd_xy}
	{% endfor %}
	M117 Cleaned!
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{bucket_left_width / 4} F{prep_spd_xy}
	RESTORE_GCODE_STATE NAME=clean_nozzle
	{% else %}
	{ action_raise_error("Please home your axes!") }
	M117 Please home first!
	{% endif %}

[menu __mymain __tune]
type = list
enable = {printer.idle_timeout.state == "Printing"}
name = Tune

[menu __mymain __tune __speed]
type = input
name = Speed: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.speed_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M220 S{'%d' % (menu.input*100)}

[menu __mymain __tune __flow]
type = input
name = Flow: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.extrude_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M221 S{'%d' % (menu.input*100)}

[menu __mymain __tune __fanspeed]
type = input
enable = {'fan' in printer}
name = Fan speed: {'%3d' % (menu.input*100)}%
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 0.01
gcode = 
	M106 S{'%d' % (menu.input*255)}

[menu __mymain __tune __offsetz]
type = input
name = Offset Z:{'%05.3f' % menu.input}
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __control]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Control

[menu __mymain __control __move_x]
type = list
name = Move X

[menu __mymain __control __move_x __move_10mm]
type = input
name = X(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_1mm]
type = input
name = X(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_01mm]
type = input
name = X(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y]
type = list
name = Move Y

[menu __mymain __control __move_y __move_10mm]
type = input
name = Y(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_1mm]
type = input
name = Y(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_01mm]
type = input
name = Y(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z]
type = list
name = Move Z

[menu __mymain __control __move_z __move_10mm]
type = input
name = Z(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_1mm]
type = input
name = Z(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_01mm]
type = input
name = Z(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 0.10
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e]
type = list
name = Move E

[menu __mymain __control __move_e __move_10mm]
type = input
name = E(10.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E10 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_1mm]
type = input
name = E(01.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_01mm]
type = input
name = E(00.1):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E0.1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __home_all]
type = command
name = Home All
gcode = G28

[menu __mymain __control __home_x]
type = command
name = Home X
gcode = G28 X

[menu __mymain __control __home_y]
type = command
name = Home Y
gcode = G28 Y

[menu __mymain __control __home_z]
type = command
name = Home Z
gcode = G28 Z

[menu __mymain __control __disable]
type = command
name = Disable steppers
gcode = 
	M84
	M18

[menu __mymain __control __fanonoff]
type = input
enable = {'fan' in printer}
name = Fan: {'ON ' if menu.input else 'OFF'}
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 1
gcode = 
	M106 S{255 if menu.input else 0}

[menu __mymain __control __G32]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = G32
gcode = G32

[menu __mymain __control __QGL]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = QGL
gcode = QUAD_GANTRY_LEVEL

[menu __mymain __control __parkbed]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Bed
gcode = PARKBED

[menu __mymain __control __parkfront]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front
gcode = PARKFRONT

[menu __mymain __control __parkfrontlow]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front Low
gcode = PARKFRONTLOW

[menu __mymain __control __BEDFANSOFF]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansOff
gcode = BEDFANSOFF

[menu __mymain __control __BEDFANSFAST]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansFast
gcode = BEDFANSFAST

[menu __mymain __temp]
type = list
name = Temperature

[menu __mymain __temp __hotend0_target]
type = input
enable = {'extruder' in printer}
name = {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input = {printer.extruder.target}
input_min = 0
input_max = {printer.configfile.config.extruder.max_temp}
input_step = 1
gcode = M104 T0 S{'%.0f' % menu.input}

[menu __mymain __temp __hotbed_target]
type = input
enable = {'heater_bed' in printer}
name = {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
input = {printer.heater_bed.target}
input_min = 0
input_max = {printer.configfile.config.heater_bed.max_temp}
input_step = 1
gcode = M140 S{'%.0f' % menu.input}

[menu __mymain __temp __preheat]
type = list
enable = { not printer.idle_timeout.state == "Printing" }
name = Preheat

[menu __mymain __temp __preheat __preheat_pla]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = PLA - 200/60
gcode = 
	M190 S60
	M104 S200
	{ menu.exit() }

[menu __mymain __temp __cooldown]
type = list
name = Cooldown

[menu __mymain __temp __cooldown __all]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = Cooldown All
gcode = 
	M104 S0
	M140 S0
	{ menu.exit() }

[menu __mymain __temp __cooldown __hotend]
type = command
enable = {'extruder' in printer}
name = Cooldown HE
gcode = M104 S0

[menu __mymain __temp __cooldown __hotbed]
type = command
enable = {'heater_bed' in printer}
name = Cooldown HB
gcode = M140 S0

[menu __mymain __filament]
type = list
name = Filament

[menu __mymain __filament __load]
type = command
name = Load Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	LOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __unload]
type = command
name = Unload Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __feed]
type = input
name = Feed: {'%.1f' % menu.input}
input = 5
input_step = 0.1
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	M83
	G1 E{'%.1f' % menu.input} F60
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __settings]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Settings

[menu __mymain __settings __manual_mbl]
type = list
name = Manual MBL

[menu __mymain __settings __manual_mbl __zpos]
type = command
name = Z-Pos = {'%05.1f' % printer.gcode_move.position.z}

[menu __mymain __settings __manual_mbl __start]
type = command
name = Start Calibration
gcode = 
	G28
	BED_MESH_CALIBRATE METHOD=manual
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __step_down]
type = command
name = Step Down
gcode = 
	TESTZ Z=-.01

[menu __mymain __settings __manual_mbl __step_up]
type = command
name = Step Up
gcode = 
	TESTZ Z=.01

[menu __mymain __settings __manual_mbl __next]
type = command
name = Next
gcode = 
	ACCEPT
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __save]
type = command
name = Save & Restart
gcode = 
	SAVE_CONFIG
	FIRMWARE_RESTART

[menu __mymain __settings __manual_mbl __abort]
type = command
name = Abort
gcode = 
	ABORT

[menu __mymain __settings __pidtuning]
type = list
name = PID Tuning

[menu __mymain __settings __pidtuning __hotend_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == 'Printing') and ('extruder' in printer)}
name = Tune Hotend PID
gcode = PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1

[menu __mymain __settings __pidtuning __hotbed_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == "Printing") and ('heater_bed' in printer)}
name = Tune Hotbed PID
gcode = PID_CALIBRATE HEATER=heater_bed TARGET=60 WRITE_FILE=1

[menu __mymain __settings __pidtuning __save_config]
type = command
name = Save config
gcode = SAVE_CONFIG

[menu __mymain __settings __dump]
type = command
name = Dump Parameters
gcode = 
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{ action_respond_info("printer['%s'].%s = %s" % (name1, name2, printer[name1][name2])) }
	{% else %}
	{ action_respond_info("printer['%s'] = %s" % (name1, printer[name1])) }
	{% endfor %}
	{% endfor %}

[menu __mymain __settings __firmware_restart]
type = command
name = FW Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = FIRMWARE_RESTART

[menu __mymain __settings __host_restart]
type = command
name = Host Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = RESTART

[display]
menu_timeout = 60
menu_root = __mymain
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[menu __mymain]
type = list
name = Main Menu

[menu __mymain __babystep]
type = input
name = Babystep Z:{'%05.3f' % menu.input}
enable = { printer.idle_timeout.state == "Printing" }
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __printstart]
type = command
enable = {('virtual_sdcard' in printer) and not printer.print_stats.filename == "" and printer.idle_timeout.state == "Idle"}
name = Start Printing
gcode = 
	M24
	{ menu.exit() }

[menu __mymain __printpause]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Pause
gcode = 
	PAUSE
	{ menu.exit() }

[menu __mymain __printresume]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Resume
gcode = 
	RESUME
	{ menu.exit() }

[menu __mymain __printcancel]
type = command
enable = { printer.pause_resume.is_paused == true }
name = Cancel
gcode = 
	CANCEL_PRINT
	{ menu.exit() }

[menu __mymain __sdcard]
type = vsdlist
enable = {('virtual_sdcard' in printer) and printer.print_stats.filename == ""}
name = SD Card

[menu __mymain __filament __clean]
type = command
name = Clean Nozzle
gcode = 
	clean_nozzle

[menu __mymain __cooldown]
type = command
name = Cooldown
gcode = COOLDOWN

[menu __mymain __lightsoff]
type = command
name = Lights Off
gcode = light_off

[menu __mymain __lightsdim]
type = command
name = Lights Dim
gcode = light_dim

[menu __mymain __lightson]
type = command
name = Lights On
gcode = light_on

[menu __mymain __shutdown]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Shut down
gcode = SHUTDOWN

[delayed_gcode _menu_pi_shutdown]
gcode = 
	{action_emergency_stop("Shutdown from menu")}
	{action_call_remote_method("shutdown_machine")}

[menu __main __octoprint]
type = disabled

[menu __main __setup __calib __delta_calib_auto]
type = disabled

[menu __main __setup __calib __delta_calib_man]
type = disabled

[gcode_macro G32]
gcode = 
	SAVE_GCODE_STATE NAME=STATE_G32
	BED_MESH_CLEAR
	G90
	CG28
	Z_TILT_ADJUST
	PARKBED
	RESTORE_GCODE_STATE NAME=STATE_G32

[gcode_macro CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro XYCG28]
gcode = 
	{% if "xy" not in printer.toolhead.homed_axes %}
	G28 X Y
	{% endif %}

[gcode_macro ZCG28]
gcode = 
	{% if "z" not in printer.toolhead.homed_axes %}
	G28 Z
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	{% set s = params.S|float %}
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
	{% endif %}

[gcode_macro CALIBRATE_Z]
rename_existing = _BASE_CALIBRATE_Z
description = Perform the Z calibration using the physical Z endstop and the Klicky
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set mesh_ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% set mesh_center = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_center %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if V %}
	{ action_respond_info("Z Offset calibration") }
	{% endif %}
	M117 Z-Calibration..
	ATTACH_PROBE
	G1 X125 Y125 F8000
	{% if mesh_ready %}
	RESPOND MSG="Z calibration: a mesh is computed and ready, probing mesh center: {mesh_center}"
	_BASE_CALIBRATE_Z BED_POSITION={mesh_center}
	{% else %}
	RESPOND MSG="Z calibration: no mesh computed, probing default point"
	_BASE_CALIBRATE_Z
	{% endif %}
	DOCK_PROBE

[respond]

[gcode_macro SHUTDOWN]
gcode = 
	LCDRGB R=0 G=0 B=0                               ; Turn off LCD neopixels (see above for this macro)
	COOLDOWN                                              ; Shortcut to turn everything off (see above for this macro)
	{action_respond_info('action:poweroff')}          ; OctoPrint compatible host shutdown
	{action_call_remote_method("shutdown_machine")}   ; Moonraker compatible host shutdown

[gcode_macro REBOOT]
gcode = 
	{action_call_remote_method("reboot_machine")}

[gcode_macro _bot_data]
variable_lapse_video_size = 0
variable_lapse_filename = 'None'
variable_lapse_path = 'None'
gcode = 
	M118 Setting bot lapse variables

[gcode_shell_command backup_cfg]
command = sh /home/pi/klipper_config/scripts/myshellscript.sh
timeout = 30.
verbose = True

[gcode_macro BACKUP_CFG]
gcode = 
	RUN_SHELL_COMMAND CMD=backup_cfg

[gcode_macro COOLDOWN]
description = Shuts down the printer
gcode = 
	M84
	TURN_OFF_HEATERS
	M117
	LIGHT_OFF

[gcode_macro RESETSPEEDS]
gcode = 
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity}
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={printer.configfile.settings.printer.square_corner_velocity}

[gcode_macro BEEP]
gcode = 
	{% set i = params.I|default(1)|int %}           ; Iterations (number of times to beep).
	{% set dur = params.DUR|default(100)|int %}     ; Duration/wait of each beep in ms. Default 100ms.
	{% set freq = params.FREQ|default(2000)|int %}  ; Frequency in Hz. Default 2kHz.
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[delayed_gcode _CLEAR_DISPLAY]
gcode = 
	M117

[delayed_gcode _DELAY_SDCARD_RESET_FILE]
gcode = 
	SDCARD_RESET_FILE

[gcode_macro DIRECT_MOVE]
gcode = 
	{% set out_param = ["G0"] %}
	{% set _dummy = out_param.append("X%s" % params.X) if params.X %}
	{% set _dummy = out_param.append("Y%s" % params.Y) if params.Y %}
	{% set _dummy = out_param.append("Z%s" % params.Z) if params.Z %}
	{% set _dummy = out_param.append("E%s" % params.E) if params.E %}
	{% set _dummy = out_param.append("F%s" % params.F) if params.F %}
	{out_param|join(" ")}

[gcode_macro _PRINT_AR]
description = Helper: Action response
gcode = 
	{% if params.SHOW_LCD|default('false') == 'true' %} M117 {params.T} {% endif %}
	{action_respond_info(params.T)}

[gcode_macro M115]
description = Print host and mcu version
rename_existing = M115.1
gcode = 
	{% set out = ['mcu build version:'] %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% if name2 is in ['mcu_version'] %}
	{% set _dummy = out.append("%s: %s" % (name1, printer[name1][name2])) %}
	{% endif %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(out|join("\n"))}
	M115.1

[gcode_shell_command plot_graph]
command = bash /home/pi/klipper_config/scripts/plot_graphs.sh
timeout = 300.0
verbose = True

[gcode_macro bedfanvars]
variable_threshold = 100
variable_fast = 0.4
variable_slow = 0.3
gcode = 

[fan_generic BedFans]
pin = PD14
kick_start_time = 0.5

[gcode_macro BedFansSlow]
gcode = 
	{% set SLOW = printer["gcode_macro bedfanvars"].slow|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={SLOW}

[gcode_macro BedFansFast]
gcode = 
	{% set FAST = printer["gcode_macro bedfanvars"].fast|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={FAST}

[gcode_macro BedFansOff]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro SET_HEATER_TEMPERATURE]
rename_existing = _SET_HEATER_TEMPERATURE
gcode = 
	{% set HEATER = params.HEATER|default("None") %}
	{% set TARGET = params.TARGET|default(0)|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if HEATER|lower == "extruder" %}
	M104 S{TARGET}
	{% elif HEATER|lower == "heater_bed" %}
	M99140 S{TARGET}
	{% else %}
	{action_respond_info("Heater %s not supported" % HEATER)}
	{% endif %}
	{% if HEATER|lower == "heater_bed" %}
	{% if TARGET >= THRESHOLD %}
	BedFansSlow
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=1
	{% else %}
	BedFansOff
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=0
	{% endif %}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	{% set S = params.S|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if S >= THRESHOLD %}
	BedFansSlow
	{% else %}
	BedFansOff
	{% endif %}
	M140 {% for p in params
	%}{'%s%s' % (p, params[p])}{%
	endfor %}
	{% if S != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={S|int} MAXIMUM={S|int + 5}
	{% endif %}
	{% if S >= THRESHOLD %}
	BedFansFast
	{% endif %}

[gcode_macro M140]
rename_existing = M99140
gcode = 
	{% set S = params.S|float %}
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={S}

[gcode_macro TURN_OFF_HEATERS]
rename_existing = _TURN_OFF_HEATERS
gcode = 
	BedFansOff
	_TURN_OFF_HEATERS

[delayed_gcode bedfanloop]
gcode = 
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if printer.heater_bed.target >= THRESHOLD %}
	{% if printer.heater_bed.temperature|int >= (printer.heater_bed.target|int - 1) %}
	BedFansFast
	{% else %}
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=5
	{% endif %}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_sensor chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VT.430 " }
	~voron~
	{% endif %}

[z_calibration]
nozzle_xy_position = 143,256
switch_xy_position = 136,235
bed_xy_position = 125,125
switch_offset = .52
max_deviation = 1.0
speed = 200
probing_first_fast = true
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_probe

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 300
variable_move_accel = 10000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 257
variable_max_bed_x = 250
variable_z_endstop_x = 143
variable_z_endstop_y = 256
variable_docklocation_x = 181
variable_docklocation_y = 251
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 1000
variable_dockmove_x = 40
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 30
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff = 10
variable_override_homing = ''
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff = printer["gcode_macro _User_Variables"].home_backoff|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION X=0 Y=0 Z=0
	_KlickyDebug msg="homing_override toolhead too low, raising it by {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X G28 X0"
	G28 X0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% else %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro Z_TILT_ADJUST]
rename_existing = _Z_TILT_ADJUST
description = 
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Z Tilt Adjust") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_Z_TILT_ADJUST {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe
	G28 Z0

[gcode_macro HEATSOAK_CHAMBER]
description = Heatsoak chamber to a specific temperature with a timeout
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set MAXTIME = params.MAXTIME|default(15)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% for _ in range(1, MAXTIME) %}
	_WAIT_CHAMBER_TEMP TEMP={SETPOINT_TEMP}
	{% endfor %}
	{% if V %}
	RESPOND MSG="Chamber temperature OK !"
	{% endif %}

[gcode_macro _WAIT_CHAMBER_TEMP]
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set CURRENT_TEMP = printer["temperature_sensor chamber"].temperature|float %}
	{% if CURRENT_TEMP <= SETPOINT_TEMP %}
	RESPOND MSG="Heating up the chamber : {CURRENT_TEMP}/{SETPOINT_TEMP}"
	G4 P{60000 * 1}
	{% endif %}

[gcode_macro HEATSOAK_BED]
description = Heatsoak bed at specified temperature and wait for a specific amount of time
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|int %}
	{% set TIME = params.SOAKTIME|default(8)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	RESPOND MSG="Heating up bed..."
	{% endif %}
	M190 S{SETPOINT_TEMP}
	{% if TIME > 0 %}
	{% for _ in range(1, TIME) %}
	RESPOND MSG="Heatsoak..."
	G4 P{60000 * 1}
	{% endfor %}
	{% else %}
	RESPOND MSG="No heatsoak needed, continue"
	{% endif %}
	{% if V %}
	RESPOND MSG="Bed temperature OK"
	{% endif %}

[heater_fan hotend_fan]
pin = PA8
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[fan]
pin = PE5
kick_start_time = 0.5
off_below = 0.10

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed
max_power = 0.4

[fan_generic exhaust_fan]
pin = PD13
kick_start_time = 5.0

[gcode_macro _LOW_TEMP_CHECK]
description = Check the nozzle is at temperature and heat it if needed
gcode = 
	{% set T = params.T|default(230)|float %}
	{% if printer.extruder.target != 0 %}
	{% if printer.extruder.temperature < printer.extruder.target %}
	M109 S{printer.extruder.target|float}
	{% endif %}
	{% else %}
	{% if printer.extruder.target < T %}
	M109 S{T}
	{% endif %}
	{% endif %}

[gcode_macro CHANGE_FILAMENT]
description = Do a PAUSE, park the toolhead over the purge bucket and unload the filament
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=CHANGE_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	PAUSE
	PARKFRONTLOW
	TIP_SHAPING
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=CHANGE_FILAMENT_state

[gcode_macro UNLOAD_FILAMENT]
description = Basic unload of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=UNLOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G1 E-20 F3600
	G4 P3000
	G1 E{DISTANCE|float * -1} F3000
	RESTORE_GCODE_STATE NAME=UNLOAD_FILAMENT_state

[gcode_macro LOAD_FILAMENT]
description = Basic load of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=LOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G92 E0
	G1 E{DISTANCE|float} F200
	G1 E50 F150
	G92 E0
	RESTORE_GCODE_STATE NAME=LOAD_FILAMENT_state

[gcode_macro TIP_SHAPING]
description = Filament tip shaping sequence
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=TIP_SHAPING_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M82
	G92 E0
	G1 E2 F3600
	G1 E0 F3600
	G1 E3 F3600
	G1 E0 F3600
	G1 E4 F3600
	G1 E0 F3600
	RESTORE_GCODE_STATE NAME=TIP_SHAPING_state

[gcode_macro PRINT_START]
description = Machine heatup procedure before starting a print
gcode = 
	{% set BED_TEMP = params.BED|int %}
	{% set EXTRUDER_TEMP = params.HOTEND|int %}
	{% set SOAK = params.SOAK|default(0)|int %}
	{% set CHAMBER_TEMP = params.CHAMBER|default(0)|int %}
	{% set CHAMBER_MAXTIME = params.CHAMBER_MAXTIME|default(20)|int %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	{% set FL_SIZE = params.SIZE|default("0_0_0_0")|string %}
	_User_Variables
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	CLEAR_PAUSE
	BED_MESH_CLEAR
	G90
	M83
	LIGHT_ON
	M117 Homing                 ; display message
	status_homing
	G28
	PARKBED
	M117 Bed Soak
	status_heating
	{% if (SOAK > 0) and (printer.heater_bed.target < (BED_TEMP - 8)) %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME={SOAK}
	{% else %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME=0
	{% endif %}
	M117 Chamber Soak
	status_heating
	{% if CHAMBER_TEMP > 0 %}
	M109 S{EXTRUDER_TEMP - 50}
	HEATSOAK_CHAMBER TEMP={CHAMBER_TEMP} MAXTIME={CHAMBER_MAXTIME}
	{% endif %}
	M117 Extruder heating
	status_heating
	{% if V %}
	RESPOND MSG="Extruder temperature OK"
	{% endif %}
	G1 X15 Y250 Z20 F6000
	M109 S{EXTRUDER_TEMP}
	G4 P{60000 * 0.5}
	CLEAN_NOZZLE
	M117 Tilt..
	status_leveling
	{% if V %}
	RESPOND MSG="TILT..."
	{% endif %}
	Z_TILT_ADJUST
	M117 Nozzle cleaning
	status_cleaning
	CLEAN_NOZZLE
	CLEAN_NOZZLE
	{% if V %}
	RESPOND MSG="Auto Z calibration..."
	{% endif %}
	M117 Auto Z Cal
	status_calibrating_z
	ATTACH_PROBE_LOCK
	COMPUTE_MESH_PARAMETERS SIZE={FL_SIZE}
	CALIBRATE_Z
	M117 Adaptive Bed Mesh
	{% if V %}
	RESPOND MSG="Bed mesh measurement..."
	{% endif %}
	status_meshing
	ADAPTIVE_BED_MESH SIZE={FL_SIZE}
	DOCK_PROBE_UNLOCK
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "PLA" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "PETG" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.0750
	SET_GCODE_OFFSET Z_ADJUST=0.010 MOVE=1
	{% elif MATERIAL == "ABS" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "FLEX" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "PC" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "NYLON" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% endif %}
	M117 Printing...
	status_printing
	{% if V %}
	RESPOND MSG="Start printing !"
	{% endif %}
	G92 E0;
	G90
	G0 X5 Y5 F6000
	G0 Z0.4
	G91
	G1 X120 E30 F600;
	G1 Y1
	G1 X-120 E30 F600;
	G92 E0;
	G90
	G1 Z2.0 E-0.2 F600 ;move the platform down 15mm
	G92 E0 ;zero the extruded length again
	G1 Z5 F600
	G92 E0
	LIGHT_ON S=25
	status_printing
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1

[gcode_macro PRINT_END]
gcode = 
	{% set FILTER_TIME = params.FILTER_TIME|default(600)|int %}
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	M117 Done!
	status_ready
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	{% if printer.extruder.temperature > 120 %}
	G92 E0                         ; zero the extruder
	G1 E-12.0 F1800                 ; retract filament
	{% endif %}
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	M84
	BED_MESH_CLEAR
	RESETSPEEDS
	LIGHT_OFF
	_SD_PRINT_STATS
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "ABS" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "PC" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "NYLON" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% endif %}
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[delayed_gcode _STOP_FILTER]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro _ADAPTIVE_MESH_VARIABLES]
variable_ready = False
variable_do_mesh = False
variable_do_nominal = False
variable_mesh_min = 0,0
variable_mesh_max = 0,0
variable_mesh_center = 0,0
variable_probe_count = 0,0
variable_rri = 0
variable_algo = "bicubic"
gcode = 

[gcode_macro COMPUTE_MESH_PARAMETERS]
description = Compute the mesh parameters and store them for later use
gcode = 
	{% set xMinConf, yMinConf = printer["configfile"].config["bed_mesh"]["mesh_min"].split(',')|map('trim')|map('int') %}
	{% set xMaxConf, yMaxConf = printer["configfile"].config["bed_mesh"]["mesh_max"].split(',')|map('trim')|map('int') %}
	{% set xProbeCntConf, yProbeCntConf = printer["configfile"].config["bed_mesh"]["probe_count"].split(',')|map('trim')|map('int') %}
	{% set algo = printer["configfile"].config["bed_mesh"]["algorithm"]|lower %}
	{% set xMeshPPS, yMeshPPS = printer["configfile"].config["bed_mesh"]["mesh_pps"].split(',')|map('trim')|map('int') %}
	{% if params.SIZE is defined and params.SIZE != "0_0_0_0" %}
	{% set xMinSpec, yMinSpec, xMaxSpec, yMaxSpec = params.SIZE.split('_')|map('trim')|map('int') %}
	{% set margin = params.MARGIN|default(5)|int %}
	{% set xMin = [xMinConf, (xMinSpec - margin)]|max %}
	{% set xMax = [xMaxConf, (xMaxSpec + margin)]|min %}
	{% set yMin = [yMinConf, (yMinSpec - margin)]|max %}
	{% set yMax = [yMaxConf, (yMaxSpec + margin)]|min %}
	{% set xProbeCnt = ((xMax - xMin) * xProbeCntConf / (xMaxConf - xMinConf))|round(0, 'ceil')|int %}
	{% set yProbeCnt = ((yMax - yMin) * yProbeCntConf / (yMaxConf - yMinConf))|round(0, 'ceil')|int %}
	{% if xProbeCnt < 3 and yProbeCnt < 3 %}
	RESPOND MSG="Computed mesh parameters: none, bed mesh not needed"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={False}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% else %}
	{% set xProbeCnt = [3, xProbeCnt]|max %}
	{% set yProbeCnt = [3, yProbeCnt]|max %}
	{% if xProbeCnt % 2 == 0 %}
	{% set xProbeCnt = xProbeCnt + 1 %}
	{% endif %}
	{% if yProbeCnt % 2 == 0 %}
	{% set yProbeCnt = yProbeCnt + 1 %}
	{% endif %}
	{% if xMeshPPS != 0 or yMeshPPS != 0 %}
	{% set probeCntMin = [xProbeCnt, yProbeCnt]|min %}
	{% set probeCntMax = [xProbeCnt, yProbeCnt]|max %}
	{% if algo == "lagrange" and probeCntMax > 6 %}
	{% set algo = "bicubic" %}
	{% endif %}
	{% if algo == "bicubic" and probeCntMin < 4 %}
	{% if probeCntMax > 6 %}
	{% if xProbeCnt > yProbeCnt %}
	{% set yProbeCnt = 5 %}
	{% else %}
	{% set xProbeCnt = 5 %}
	{% endif %}
	{% else %}
	{% set algo = "lagrange" %}
	{% endif %}
	{% endif %}
	{% endif %}
	{% set rRefIndex = (((xProbeCnt * yProbeCnt) - 1) / 2)|int %}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_min = "%d,%d"|format(xMin, yMin) %}
	{% set mesh_max = "%d,%d"|format(xMax, yMax) %}
	{% set probe_count = "%d,%d"|format(xProbeCnt, yProbeCnt) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	RESPOND MSG="Computed mesh parameters: MESH_MIN={mesh_min} MESH_MAX={mesh_max} MESH_CENTER={mesh_center} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={False}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_min VALUE='"{mesh_min}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_max VALUE='"{mesh_max}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=probe_count VALUE='"{probe_count}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=rri VALUE={rRefIndex}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=algo VALUE='"{algo}"'
	{% endif %}
	{% else %}
	RESPOND MSG="Computed mesh parameters: none, going for a nominal bed mesh"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={True}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={True}

[gcode_macro ADAPTIVE_BED_MESH]
description = Perform a bed mesh, but only where and when it's needed
gcode = 
	{% set ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if ready %}
	_DO_ADAPTIVE_MESH
	{% else %}
	RESPOND MSG="Adaptive bed mesh: parameters not computed, automatically calling the COMPUTE_MESH_PARAMETERS macro prior to the mesh"
	COMPUTE_MESH_PARAMETERS {rawparams}
	M400
	_DO_ADAPTIVE_MESH
	{% endif %}

[gcode_macro _DO_ADAPTIVE_MESH]
gcode = 
	{% set do_mesh = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_mesh %}
	{% set do_nominal = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_nominal %}
	{% set mesh_min = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_min %}
	{% set mesh_max = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_max %}
	{% set probe_count = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].probe_count %}
	{% set rRefIndex = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].rri %}
	{% set algo = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].algo %}
	{% if do_mesh %}
	{% if do_nominal %}
	RESPOND MSG="Adaptive bed mesh: nominal bed mesh"
	BED_MESH_CALIBRATE
	{% else %}
	RESPOND MSG="Adaptive bed mesh: MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	BED_MESH_CALIBRATE MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}
	{% endif %}
	{% else %}
	RESPOND MSG="Adaptive bed mesh: no mesh to be done"
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={False}

[gcode_macro SEARCH_VARS]
description = Search for variables in the "printer" object from Klipper
gcode = 
	{% set search = params.S|lower %}
	{% set ns = namespace() %}
	{% for item in printer  %}
	{% if ' ' in item %}
	{% set ns.path = ['printer', "['%s']" % (item), ''] %}
	{% else %}
	{% set ns.path = ['printer.', item, ''] %}
	{% endif %}
	{% if search in ns.path|lower %}
	{ action_respond_info(ns.path|join) }
	{% endif %}
	{% if printer[item].items() %}
	{% for childkey, child in printer[item].items() recursive %}
	{% set ns.path = ns.path[:loop.depth|int + 1] %}
	{% if ' ' in childkey %}
	{% set null = ns.path.append("['%s']" % (childkey)) %}
	{% else %}
	{% set null = ns.path.append(".%s" % (childkey)) %}
	{% endif %}
	{% if child is mapping  %}
	{ loop(child.items()) }
	{% else %}
	{% if search in ns.path|lower %}
	{ action_respond_info("%s : %s" % (ns.path|join, child)) }
	{% endif %}
	{% endif %}
	{% endfor %}
	{% endif %}
	{% endfor %}

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	{% set TYPE = params.TYPE|default("")|string %}
	{% set BED_TEMP = params.BED_TEMP|default(110)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(240)|float %}
	{% set MATERIAL = params.MATERIAL|default("ABS")|string %}
	{% if TYPE=="" %}
	{action_respond_info("Please call this macro using TYPE= \"flow\" or \"pressure_advance\"")}
	{action_raise_error("not enough parameters to start a calibration!")}
	{% elif TYPE=="flow" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=130_130_170_170
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	{% elif TYPE=="pressure_advance" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=90_90_210_210
	PRESSURE_ADVANCE_CALIBRATION
	{% endif %}
	END_PRINT FILTER_TIME=0

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(0.93)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	M221 S{e_multiplier * 100}
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	G90
	M106 S{fan_speed * 255 / 100}
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	{% for perim_num in range(number_of_perimeters) %}
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	{% set do_raft = params.RAFT|default(1)|int %}
	{% set print_size      = params.SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	{% set fast_line_ratio_percent = 50 %}
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band - spacing_purge %}
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting Pressure Advance calibration print.")}
	{action_respond_info("")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button once the print starts exhibiting PA values that are obviously too high.")}
	{action_respond_info("")}
	{action_respond_info("PA of first band: %.4f" % pa_start)}
	{action_respond_info("PA of last band: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA increment per band: %.4f" % pa_increment)}
	{action_respond_info("Number of bands: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Inspect the printed model. "
	"Look at the top and bottom lines in each band, on the right side of the two vertical raft bars (where the print speeds change). "
	"Find the highest band from the bottom where the lines at its top still resemble the lines at its bottom, with no visible extrusion width irregularities. "
	"Your final Pressure Advance value would then be:"
	)}
	{action_respond_info("")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Update your [extruder] config section and set \"pressure_advance\" to the value you calculated.")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	{% for curr_band_num in range(1, num_bands + 1) %}
	{% set outer_loop = loop %}
	{% set curr_pa_value = pa_start + (curr_band_num - 1) * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro M486]
gcode = 
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[gcode_macro M701]
gcode = 
	LOAD_FILAMENT

[gcode_macro M702]
gcode = 
	UNLOAD_FILAMENT

[gcode_macro M125]
gcode = 
	PARK

[gcode_macro M900]
gcode = 
	{% set pa = params.K|float %}
	SET_PRESSURE_ADVANCE ADVANCE={pa}

[gcode_macro M204]
description = Set and limit acceleration to cfg value
rename_existing = M204.1
gcode = 
	{% set accel = params.S|float                      if 'S' in params and params.S|float > 0
	else [params.P|float,params.T|float]|min if 'P' in params and 'T' in params and
	params.P|float > 0 and params.T|float > 0 %}
	{% if accel is defined %}
	{% set lim_accel          = [accel,     printer.configfile.settings.printer.max_accel         ]|min %}
	{% set lim_accel_to_decel = [accel / 2, printer.configfile.settings.printer.max_accel_to_decel]|min %}
	SET_VELOCITY_LIMIT ACCEL={lim_accel} ACCEL_TO_DECEL={lim_accel_to_decel}
	{% else %}
	{action_respond_info("Invalid M204 command \"M204 %s\"" % rawparams)}
	{% endif %}

[gcode_macro M117]
rename_existing = M117.1
gcode = 
	{% if rawparams %}
	{% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
	SET_DISPLAY_TEXT MSG="{escaped_msg}"
	RESPOND TYPE=command MSG="{escaped_msg}"
	{% else %}
	SET_DISPLAY_TEXT
	{% endif %}

[sdcard_loop]

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[neopixel sb_leds]
pin = PB0
chain_count = 3
color_order = GRBW
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
initial_white = 0.0

[gcode_macro _sb_vars]
variable_colors = {
	'logo': {
	'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
	'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
	'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
	'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'printing': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	},
	'nozzle': {
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w':0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w':0.0},
	},
	'thermal': {
	'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
	}
	}
variable_logo_led_name = "sb_leds"
variable_logo_idx = "1"
variable_nozzle_led_name = "sb_leds"
variable_nozzle_idx = "2,3"
gcode = 

[gcode_macro _set_sb_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = params.LED|string %}
	{% set idx = (params.IDX|string).split(',') %}
	{% set transmit_last = params.TRANSMIT|default(1) %}
	{% for led_index in idx %}
	{% set transmit=transmit_last if loop.last else 0 %}
	set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
	{% endfor %}

[gcode_macro _set_sb_leds_by_name]
gcode = 
	{% set leds_name = params.LEDS %}
	{% set color_name = params.COLOR %}
	{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
	{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
	{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
	{% set transmit = params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}

[gcode_macro _set_logo_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro _set_nozzle_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro set_logo_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}

[gcode_macro set_nozzle_leds_on]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}

[gcode_macro set_nozzle_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}

[gcode_macro status_off]
gcode = 
	set_logo_leds_off transmit=0
	set_nozzle_leds_off

[gcode_macro status_ready]
gcode = 
	_set_sb_leds_by_name leds="logo" color="standby" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1

[gcode_macro status_busy]
gcode = 
	_set_sb_leds_by_name leds="logo" color="busy" transmit=0
	set_nozzle_leds_on

[gcode_macro status_heating]
gcode = 
	_set_sb_leds_by_name leds="logo" color="heating" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1

[gcode_macro status_leveling]
gcode = 
	_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
	set_nozzle_leds_on

[gcode_macro status_homing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="homing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_cleaning]
gcode = 
	_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
	set_nozzle_leds_on

[gcode_macro status_meshing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_calibrating_z]
gcode = 
	_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
	set_nozzle_leds_on

[gcode_macro status_printing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="printing" transmit=0
	set_nozzle_leds_on

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[filament_motion_sensor filament_sensor]
detection_length = 14.00
extruder = extruder
switch_pin = ^PG12
pause_on_runout = True
event_delay = 3.0
pause_delay = 0.5
insert_gcode = 
	M117 Insert Detected
runout_gcode = 
	M117 Runout Detected
	LCDRGB R=1 G=0 B=0
	BEEP I=12

[gcode_macro M600]
gcode = 
	LCDRGB R=0 G=1 B=0  ; Turn LCD green
	PAUSE                ; Pause

[pause_resume]

[display_status]

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set z = params.Z|default(10)|int %}                                                   ; z hop amount
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}                              ; set z hop variable for reference in resume macro
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}    ; set hotend temp variable for reference in resume macro
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0                                  ; disable filament sensor
	SAVE_GCODE_STATE NAME=PAUSE                                                          ; save current print position for resume
	BASE_PAUSE                                                                           ; pause print
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}       ; check that zhop doesn't exceed z max
	G91                                                                              ; relative positioning
	G1 Z{z} F900                                                                     ; raise Z up by z hop amount
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }                  ; if z max is exceeded, show message and set zhop value for resume to 0
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90                                                                                  ; absolute positioning
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000   ; park toolhead at front center
	SAVE_GCODE_STATE NAME=PAUSEPARK                                                      ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
	M104 S0                                                                              ; turn off hotend
	SET_IDLE_TIMEOUT TIMEOUT=43200                                                       ; set timeout to 12 hours
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	{% set e = params.E|default(2.5)|int %}
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1                          ; enable filament sensor
	RESETRGB                                                                    ; reset LCD color
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}  ; set timeout back to configured value
	{% if etemp > 0 %}
	M109 S{etemp|int}                                                        ; wait for hotend to heat back up
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100                     ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
	G91                                                                          ; relative positioning
	M83                                                                          ; relative extruder positioning
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900                                                ; prime nozzle by E, lower Z back down
	{% else %}
	G1 Z{zhop * -1} F900                                                     ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60                          ; restore position
	BASE_RESUME                                                                  ; resume print
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT
	RESETSPEEDS

[gcode_macro RESONANCES_TEST]
description = Run input shaper test
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	_CG28
	TURN_OFF_HEATERS
	M107
	{% if user.hw.chamber.fan %} M141 {% endif %}
	{% if user.hw.filter.ena %} _SET_FILTER {% endif %}
	_PRINT_AR T="INPUT SHAPER: Noise values, check if sensor is installed"
	MEASURE_AXES_NOISE
	_PRINT_AR T="INPUT SHAPER: Resonance Tests starting ..."
	TEST_RESONANCES AXIS=X
	TEST_RESONANCES AXIS=Y
	_PRINT_AR T="INPUT SHAPER: Resonance Tests done"
	_PRINT_AR T="INPUT SHAPER: Generate graph in backround"
	RUN_SHELL_COMMAND CMD=plot_graph

[gcode_macro DUMP_PARAMETERS]
description = Dump all Klipper parameters to terminal, helps find names and values of variables for use in macros
gcode = 
	{% set parameters = namespace(output = '') %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% set donotwant = ['bed_mesh','configfile'] %}
	{% if name1 is not in donotwant %}
	{% set param = "printer['%s'].%s = %s" % (name1, name2, printer[name1][name2]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endif %}
	{% else %}
	{% set param = "printer['%s'] = %s" % (name1, printer[name1]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(parameters.output)}

[gcode_macro TEST_SPEED]
gcode = 
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	{% set iterations = params.ITERATIONS|default(5)|int %}
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	{% set bound = params.BOUND|default(20)|int %}
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	SAVE_GCODE_STATE NAME=TEST_SPEED
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	G28
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	{% for i in range(iterations) %}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	G28
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro FEED_RATE_TEST]
gcode = 
	{% if printer.configfile.config.respond is not defined %}
	{action_raise_error("This gcode_macro requires the [respond] section in your printer.cfg")}
	{% endif %}
	{% set ns_test_steps = namespace(collector="", arr=[]) %}
	{% for char in params.TEST_STEPS|default("x_test,y_test,rect_test,diag_test")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% set ns_test_steps.arr = ns_test_steps.arr + [ns_test_steps.collector|string] %}
	{% set ns_test_steps.collector = "" %}
	{% else %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_speed_steps = namespace(collector="", arr=[]) %}
	{% for char in params.SPEED_STEPS|default("80.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% set ns_speed_steps.arr = ns_speed_steps.arr + [ns_speed_steps.collector|float] %}
	{% set ns_speed_steps.collector = "" %}
	{% else %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_distance_steps = namespace(collector="", arr=[]) %}
	{% for char in params.DISTANCE_STEPS|default("40.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% set ns_distance_steps.arr = ns_distance_steps.arr + [ns_distance_steps.collector|float] %}
	{% set ns_distance_steps.collector = "" %}
	{% else %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_accel_steps = namespace(collector="", arr=[]) %}
	{% for char in params.ACCEL_STEPS|default(printer.toolhead.max_accel|string)|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% set ns_accel_steps.arr = ns_accel_steps.arr + [ns_accel_steps.collector|int] %}
	{% set ns_accel_steps.collector = "" %}
	{% else %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set center_x_position = printer.toolhead.axis_maximum.x / 2 %}
	{% set center_y_position = printer.toolhead.axis_maximum.y / 2 %}
	{% set accel_steps = ns_accel_steps.arr %}
	{% set test_steps = ns_test_steps.arr %}
	{% set distance_steps = ns_distance_steps.arr %}
	{% set speed_steps = ns_speed_steps.arr %}
	SAVE_GCODE_STATE NAME=speed_testing_macro
	{% set testRunCounter = namespace(value=0) %}
	RESPOND PREFIX="Speed-Test - " MSG="Starting Speed testing with"
	RESPOND PREFIX="- " MSG="distance_steps={distance_steps}"
	RESPOND PREFIX="- " MSG="speed_steps={speed_steps}"
	RESPOND PREFIX="- " MSG="accel_steps={accel_steps}"
	RESPOND PREFIX="- " MSG="test_steps={test_steps}"
	RESPOND PREFIX="" MSG="--------------------"
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	G90
	G1 X{center_x_position} Y{center_y_position} Z25 F4000
	{% for distance_step in distance_steps %}
	{% for speed_step in speed_steps %}
	{% set speed_feedrate_step = speed_step * 60 %}
	{% for accel_step in accel_steps %}
	{% set testRunCounter.value = testRunCounter.value + 1 %}
	M204 S{accel_step}
	RESPOND PREFIX="Speed-Test - " MSG="Test-Run {testRunCounter.value} => distance: {distance_step} speed: {speed_step} acceleration: {accel_step}"
	{% for test_step in test_steps %}
	_{test_step|upper} FEEDRATE={speed_feedrate_step} DISTANCE={distance_step}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	RESTORE_GCODE_STATE NAME=speed_testing_macro

[gcode_macro _X_TEST]
description = Moves the head left/right
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _Y_TEST]
description = Moves the head forward/backward
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 y{distance} F{speed_feedrate}
	G1 y-{distance * 2} F{speed_feedrate}
	G1 y{distance} F{speed_feedrate}
	G90

[gcode_macro _RECT_TEST]
description = Moves the head in a rectangle
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x-{distance} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance * 2} F{speed_feedrate}
	G1 y{distance * 2} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _DIAG_TEST]
description = Moves the head diagonally. First spinning the stepper_x, then the stepper_y. (CoreXY)
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x-{distance * 2} y-{distance * 2} F{speed_feedrate}
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G1 x-{distance * 2} y{distance * 2} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G90

[gcode_macro _CIRCLE_TEST]
description = Moves the head in a circle twice.
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	{% if printer.configfile.config.gcode_arcs is not defined %}
	{action_raise_error("The circle test requires the [gcode_arcs] section in your printer.cfg")}
	{% endif %}
	{% for count in range(2) %}
	G2 I{distance} J{distance} F{speed_feedrate}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKREAR
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	CG28                               ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKBED
	G90                                ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro TOGGLE_BEEPER]
description = Toggle the printer beeper on and off.
gcode = 
	{% set beeper_state = printer.save_variables.variables.beeper_state|lower %}
	{% if printer['gcode_macro _USER_VARIABLE'].debug == 1 %}
	{action_respond_info('==== TOGGLE_BEEPER ====')}
	{action_respond_info("beeper_state: %s" % (beeper_state))}
	{action_respond_info('===============')}
	{% endif %}
	{% if beeper_state == "off" %}
	{action_respond_info('beeper is off, turning it on')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"on"'
	{% else %}
	{action_respond_info('beeper is on= turning it off')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"off"'
	{% endif %}
	SONG_SINGLE_BEEP

[gcode_macro SONG_SINGLE_BEEP]
gcode = 
	M300 S830.61 P137

[output_pin beeper]
pin = PE8
pwm = True
value = 0
shutdown_value = 0
cycle_time = 0.001

[gcode_macro M300]
gcode = 
	{% set S = params.S|default(1000)|int %} ; S sets the tone frequency
	{% set P = params.P|default(100)|int %} ; P sets the tone duration
	{% set L = 0.5 %} ; L varies the PWM on time, close to 0 or 1 the tone gets a bit quieter. 0.5 is a symmetric waveform
	{% if S <= 0 %} ; dont divide through zero
	{% set F = 1 %}
	{% set L = 0 %}
	{% elif S >= 10000 %} ;max frequency set to 10kHz
	{% set F = 0 %}
	{% else %}
	{% set F = 1/S %} ;convert frequency to seconds
	{% endif %}
	SET_PIN PIN=beeper VALUE={L} CYCLE_TIME={F} ;Play tone
	G4 P{P} ;tone duration
	SET_PIN PIN=beeper VALUE=0

[gcode_macro SONG_THUNDERSTRUCK]
gcode = 
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166

[gcode_macro SONG_AFRICA]
gcode = 
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P450
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P450
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P300
	M300 S2637 P225
	M300 S2637 P300
	M300 S2489 P300
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P600
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P600
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P150
	M300 S2489 P150
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P450
	M300 S2637 P300
	M300 S2637 P300
	M300 S2489 P225
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P900
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200

[gcode_macro SONG_STARWARS_IMP]
gcode = 
	M300 S1174 P401
	M300 S1174 P401
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P803

[gcode_macro SONG_ALLIWANT]
gcode = 
	M300 S1046 P333
	M300 S1318 P333
	M300 S1567 P333
	M300 S987 P166
	M300 S0 P41
	M300 S2093 P333
	M300 S0 P83
	M300 S0 P41
	M300 S987 P333
	M300 S880 P166
	M300 S0 P41
	M300 S1567 P333
	M300 S0 P83
	M300 S0 P41
	M300 S2349 P333
	M300 S2093 P333
	M300 S2093 P333
	M300 S987 P333
	M300 S2093 P166
	M300 S0 P41
	M300 S987 P333
	M300 S0 P83
	M300 S0 P41
	M300 S880 P166
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S880 P333
	M300 S2093 P333
	M300 S2349 P333
	M300 S2637 P333
	M300 S2349 P166
	M300 S2093 P333
	M300 S880 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S3135 P166
	M300 S2093 P333
	M300 S0 P166
	M300 S2349 P333
	M300 S2349 P166
	M300 S2349 P333
	M300 S0 P166
	M300 S1760 P166
	M300 S3135 P666
	M300 S880 P500
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P500
	M300 S1318 P166
	M300 S0 P333
	M300 S0 P166
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P333
	M300 S0 P166
	M300 S1318 P166
	M300 S0 P333
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S0 P666
	M300 S1760 P333
	M300 S880 P166
	M300 S880 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S880 P333
	M300 S0 P166
	M300 S2349 P166
	M300 S0 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S0 P166
	M300 S1760 P500
	M300 S2093 P333
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P166
	M300 S0 P333
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S2093 P500
	M300 S1046 P166
	M300 S1046 P166
	M300 S1174 P166
	M300 S1318 P166
	M300 S1396 P333

[gcode_macro SONG_MACGYVER]
gcode = 
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S2217 P300
	M300 S0 P150
	M300 S2959 P150
	M300 S3322 P300
	M300 S0 P150
	M300 S0 P150
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S1864 P150
	M300 S1864 P150
	M300 S1864 P150
	M300 S3322 P150
	M300 S0 P150
	M300 S3520 P150
	M300 S0 P300
	M300 S0 P300
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S0 P300
	M300 S2959 P150
	M300 S1864 P300
	M300 S3322 P300
	M300 S0 P300

[gcode_macro SONG_TAKEONME]
gcode = 
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300
	M300 S932 P150
	M300 S1661 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300

[gcode_macro SONG_DUCKTOY]
gcode = 
	M300 S2217 P240
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120

[gcode_macro SONG_LOONEY]
gcode = 
	M300 S2093 P428
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S880 P642
	M300 S2093 P214
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2489 P214
	M300 S2637 P642
	M300 S2637 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S880 P214
	M300 S2093 P214
	M300 S1567 P214
	M300 S932 P214
	M300 S880 P214
	M300 S1396 P214

[gcode_macro SONG_RICE_COOKER_DONE]
gcode = 
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3951.07 P250
	M300 S3135.96 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3135.96 P500

[gcode_macro Song_Futurama1]
gcode = 
	M300 S0 P2105
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S2637 P263
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S1975 P526
	M300 S1975 P263
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2959 P263

[gcode_macro Song_Futurama2]
gcode = 
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S0 P267
	M300 S1318 P133
	M300 S1318 P133
	M300 S1318 P267
	M300 S1244 P267
	M300 S1174 P267
	M300 S1174 P267
	M300 S1108 P267
	M300 S1108 P267

[gcode_macro Song_Mario]
gcode = 
	M300 S1046 P150
	M300 S1318 P150
	M300 S1567 P150
	M300 S2093 P150
	M300 S2637 P150
	M300 S3135 P400
	M300 S2637 P400
	M300 S1046 P150
	M300 S1244 P150
	M300 S1661 P150
	M300 S2093 P150
	M300 S2489 P150
	M300 S3322 P400
	M300 S2489 P400
	M300 S1174 P150
	M300 S1396 P150
	M300 S932 P150
	M300 S2349 P150
	M300 S2793 P150
	M300 S1864 P150
	M300 S0 P400
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S4186 P900

[gcode_macro Song_Mario2]
gcode = 
	M300 P214 S659
	M300 P210 S659
	M300 P219 S0
	M300 P210 S659
	M300 P219 S0
	M300 P214 S523
	M300 P357 S659
	M300 P72 S0
	M300 P357 S784
	M300 P500 S0
	M300 P357 S392
	M300 P500 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S523
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S880
	M300 P150 S784
	M300 P150 S880
	M300 P147 S784
	M300 P153 S0
	M300 P150 S988
	M300 P825 S784
	M300 P675 S0
	M300 P2001 S131
	M300 P250 S330
	M300 P245 S330
	M300 P756 S0
	M300 P250 S330
	M300 P250 S330
	M300 P125 S330
	M300 P125 S330
	M300 P250 S349
	M300 P245 S349
	M300 P756 S0
	M300 P250 S349
	M300 P250 S349
	M300 P125 S349
	M300 P125 S349
	M300 P250 S392
	M300 P245 S392

[gcode_macro Song_Doom]
gcode = 
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P57 S82
	M300 P78 S0
	M300 P142 S82
	M300 P135 S123
	M300 P135 S131
	M300 P28 S82
	M300 P106 S0
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P114 S131
	M300 P28 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P674 S117
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S123
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P667 S117
	M300 P7 S82
	M300 P35 S82
	M300 P92 S0
	M300 P7 S82
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131
	M300 P128 S131
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S117
	M300 P128 S117
	M300 P7 S82
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S123
	M300 P135 S131
	M300 P7 S82
	M300 P21 S82
	M300 P106 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P128 S165
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P135 S82
	M300 P114 S131
	M300 P21 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P7 S117
	M300 P667 S117
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131

[gcode_macro Song_Simpsons]
gcode = 
	M300 P563 S523
	M300 P375 S659
	M300 P375 S740
	M300 P188 S880
	M300 P563 S784
	M300 P375 S659
	M300 P375 S523
	M300 P188 S440
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P750 S392
	M300 P375 S0
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P188 S392
	M300 P563 S466
	M300 P188 S523
	M300 P188 S523
	M300 P188 S523
	M300 P375 S523

[gcode_macro Song_Centerfold]
gcode = 
	M300 P539 S494
	M300 P386 S587
	M300 P143 S494
	M300 P266 S440
	M300 P261 S392
	M300 P511 S392
	M300 P268 S330
	M300 P261 S392
	M300 P420 S392
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P245 S392
	M300 P273 S440
	M300 P557 S494
	M300 P73 S0
	M300 P393 S587
	M300 P148 S494
	M300 P273 S440
	M300 P261 S392
	M300 P539 S392
	M300 P34 S0
	M300 P261 S330
	M300 P261 S392
	M300 P268 S392
	M300 P130 S330
	M300 P148 S392
	M300 P268 S440
	M300 P284 S392
	M300 P273 S392
	M300 P273 S440
	M300 P534 S494
	M300 P34 S0
	M300 P402 S587
	M300 P143 S494
	M300 P261 S440
	M300 P266 S392
	M300 P518 S392
	M300 P284 S330
	M300 P284 S392
	M300 P277 S392
	M300 P155 S330
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P280 S392
	M300 P300 S440
	M300 P507 S494
	M300 P414 S587
	M300 P136 S494
	M300 P291 S440
	M300 P255 S392
	M300 P541 S392
	M300 P277 S330
	M300 P291 S392
	M300 P273 S392
	M300 P141 S330
	M300 P155 S392
	M300 P273 S440
	M300 P250 S392
	M300 P273 S392
	M300 P266 S440
	M300 P280 S494
	M300 P250 S587
	M300 P545 S587
	M300 P261 S587
	M300 P164 S587
	M300 P575 S659

[gcode_macro Song_GanstaParadise]
gcode = 
	M300 P19 S1047
	M300 P539 S104
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P37 S523
	M300 P142 S98
	M300 P6 S87
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P167 S494
	M300 P19 S98
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P31 S523
	M300 P155 S87
	M300 P6 S1047
	M300 P551 S65
	M300 P186 S392
	M300 P198 S784
	M300 P359 S0
	M300 P186 S523
	M300 P12 S1047
	M300 P545 S104
	M300 P186 S523
	M300 P235 S1047
	M300 P322 S0
	M300 P56 S523
	M300 P130 S98
	M300 P25 S1047
	M300 P532 S87
	M300 P186 S523
	M300 P204 S1047
	M300 P353 S0
	M300 P186 S494
	M300 P12 S988
	M300 P545 S98
	M300 P186 S494
	M300 P173 S988
	M300 P384 S0
	M300 P50 S523
	M300 P118 S87
	M300 P19 S65
	M300 P155 S1047
	M300 P402 S0
	M300 P186 S392
	M300 P130 S784
	M300 P613 S0
	M300 P173 S1047
	M300 P384 S0
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P186 S523
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P186 S494
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P186 S523
	M300 P180 S1047
	M300 P378 S0
	M300 P186 S392

[gcode_macro Song_Naruto]
gcode = 
	M300 P311 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P35 S0
	M300 P150 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P92 S0
	M300 P309 S740
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P91 S0
	M300 P299 S587
	M300 P150 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P60 S220
	M300 P92 S0
	M300 P309 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P30 S0
	M300 P155 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P90 S0
	M300 P311 S880
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P84 S0
	M300 P302 S220
	M300 P155 S220
	M300 P60 S220
	M300 P87 S0
	M300 P60 S220
	M300 P91 S0
	M300 P60 S220
	M300 P90 S0
	M300 P82 S659
	M300 P229 S1047
	M300 P151 S196
	M300 P60 S196
	M300 P91 S0
	M300 P56 S196
	M300 P91 S0
	M300 P61 S196
	M300 P84 S0
	M300 P271 S1047
	M300 P30 S0
	M300 P155 S1175
	M300 P60 S196
	M300 P87 S0
	M300 P151 S1047
	M300 P60 S196
	M300 P90 S0
	M300 P311 S988
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P113 S880
	M300 P34 S0
	M300 P118 S784
	M300 P34 S0
	M300 P264 S740
	M300 P30 S0
	M300 P153 S784
	M300 P149 S82
	M300 P267 S880
	M300 P34 S0
	M300 P163 S988
	M300 P148 S82
	M300 P151 S82
	M300 P151 S98
	M300 P147 S92

[gcode_macro Song_StillAlive]
gcode = 
	M300 P511 S0
	M300 P247 S440
	M300 P250 S466
	M300 P265 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S659
	M300 P247 S587
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S523
	M300 P247 S523
	M300 P249 S262
	M300 P250 S523
	M300 P250 S262
	M300 P254 S440
	M300 P259 S466
	M300 P269 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S784
	M300 P247 S698
	M300 P247 S659
	M300 P250 S587
	M300 P265 S587
	M300 P248 S659
	M300 P247 S698
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S784
	M300 P250 S880
	M300 P265 S932
	M300 P248 S932
	M300 P247 S880
	M300 P249 S349
	M300 P249 S784
	M300 P247 S349
	M300 P247 S698
	M300 P250 S784
	M300 P265 S880
	M300 P248 S880
	M300 P247 S784
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S698
	M300 P247 S698
	M300 P249 S659
	M300 P249 S220
	M300 P247 S659
	M300 P247 S740
	M300 P250 S740
	M300 P513 S220
	M300 P247 S740
	M300 P249 S587
	M300 P249 S494
	M300 P247 S587
	M300 P247 S740
	M300 P250 S587
	M300 P265 S440

[gcode_macro Song_OnlineSong]
gcode = 
	M300 P699 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P1716 S415
	M300 P318 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P2097 S415

[gcode_macro _ADD_PRINT_TIME]
description = Helper: Store print time values in variables
gcode = 
	{% set time = printer.print_stats.total_duration %}
	{% set filament = printer.print_stats.filament_used|float %}
	{% set filtertime = time if printer['gcode_macro PRINT_START'].var.filter else 0 %}
	{% if not printer.save_variables.variables.print_stats %}
	{% set print_stats = {'time': {'total': time, 'service': time, 'filter': filtertime}, 'filament': filament}%}
	{% else %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'total':(print_stats.time.total + time)|int}) %}
	{% set _dummy = print_stats.time.update({'service':(print_stats.time.service + time)|int}) %}
	{% set _dummy = print_stats.time.update({'filter':(print_stats.time.filter + filtertime)|int}) %}
	{% set _dummy = print_stats.update({'filament':(print_stats.filament + filament)|float}) %}
	{% endif %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"

[gcode_macro _DISPLAY_PRINT_TIME]
description = Helper: Print actual stored print time
gcode = 
	{% set totaltime = params.SECONDS|int if 'SECONDS' in params|upper
	else printer.save_variables.variables.print_stats.time.total %}
	{% set prefix = params.PREFIX|default('Total') %}
	{% set h,m,s = (totaltime / 3600)|int, ((totaltime / 60) % 60)|int, (totaltime % 60)|int %}
	{action_respond_info("Print time %s %d:%02d:%02d" % (prefix,h,m,s))}
	M117 {prefix} {h}:{'%02d' % m}:{'%02d' % s}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10

[gcode_macro _SD_PRINT_STATS]
description = Helper: Print statistic of last print
gcode = 
	{% set PT = printer.print_stats.print_duration %}
	{% set Ph,Pm,Ps = (PT / 3600)|int, ((PT / 60) % 60)|int, (PT % 60)|int %}
	{% set TT = printer.print_stats.total_duration %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set Fil = printer.print_stats.filament_used|float / 1000.0 %}
	{action_respond_info("Statistic of last Print (%s):
	Name: %s
	Filament: %.4fm
	Print Time: %d:%02d:%02d
	Total Time: %d:%02d:%02d" %
	(params.R, printer.print_stats.filename, Fil, Ph, Pm, Ps, Th, Tm, Ts))}

[gcode_macro _SD_PRINTER_STATS]
description = Helper: Print statistic of printer
gcode = 
	{% set ST = printer.save_variables.variables.print_stats.time.service %}
	{% set Sh,Sm,Ss = (ST / 3600)|int, ((ST / 60) % 60)|int, (ST % 60)|int %}
	{% set TT = printer.save_variables.variables.print_stats.time.total %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set FT = printer.save_variables.variables.print_stats.time.filter %}
	{% set Fh,Fm,Fs = (FT / 3600)|int, ((FT / 60) % 60)|int, (FT % 60)|int %}
	{% set Fil = printer.save_variables.variables.print_stats.filament|float / 1000.0 %}
	{action_respond_info("Printer Statistics:
	Total Print Time: %d:%02d:%02d
	Total Filament used: %.4fm
	Filter use time: %d:%02d:%02d
	Time since last Service: %d:%02d:%02d" %
	(Th, Tm, Ts, Fil, Fh, Fm, Fs, Sh, Sm, Ss))}
	_CHECK_FILTER

[gcode_macro _CHECK_FILTER]
description = Helper: Print filter exchange warning
gcode = 
	{% if printer['gcode_macro _USER_VARIABLE'].hw.filter.ena and
	printer.save_variables.variables.print_stats %}
	{% set Fh = (printer.save_variables.variables.print_stats.time.filter / 3600)|int %}
	{% if Fh >= printer['gcode_macro _USER_VARIABLE'].peripheral.filter.warning %}
	M117 Change Filter!
	{action_respond_info("Change Filter material at Micro!")}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10
	{% endif %}
	{% endif %}

[gcode_macro RST_FILTER]
description = Reset Nevermore interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'filter': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Flter used time reseted to zero")}
	{% endif %}

[gcode_macro RST_SERVICE]
description = Reset Service interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'service': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Time since last service reseted to zero")}
	{% endif %}

[save_variables]
filename = /home/pi/klipper_config/.variables.stb

[delayed_gcode _INIT]
initial_duration = 1
gcode = 
	_USER_VARIABLE
	_CHECK_CONSITENT
	_EXECUTE_AT_INIT

[gcode_macro _EXECUTE_AT_INIT]
description = Helper: Everything that should run at klipper start
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% if printer.save_variables.variables.filament_sensor %} _RESTORE_FILAMENT_SENSOR {% endif %}
	{% if user.hw.filter.ena %} _CHECK_FILTER {% endif %}
	{% if user.hw.display.ena %} UPDATE_DELAYED_GCODE ID=_DISPLAY_INIT DURATION=2 {% endif %}
	_PRINT_AR T="Klipper INIT done"

[gcode_macro _CHECK_CONSITENT]
description = Helper: Check that some criterias are meet in the printer.cfg
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% set text = ["CONFIG: ERROR"] %}
	{% if user.run is not defined %}
	{% set _dummy = text.append("_USER_VARIABLE macro missing") %}
	{% elif not user.run %}
	{% set _dummy = text.append("_USER_VARIABLE macro not executed") %}
	{% endif %}
	{% if 'save_variables' not in printer %}
	{% set _dummy = text.append("[save_variables] missing") %}
	{% endif %}
	{% if 'virtual_sdcard' not in printer %}
	{% set _dummy = text.append("[virtual_sdcard] missing") %}
	{% endif %}
	{% if text|length > 1 %}
	{action_respond_info(text|join("\n"))}
	{% endif %}

[gcode_macro _USER_VARIABLE]
description = Helper: Contains User defined printer variables
variable_hw = {}
variable_homing = {}
variable_z_hop = 0
variable_speed = {}
variable_probe = {}
variable_park = {}
variable_filament = {}
variable_purge = {}
variable_print_start = {}
variable_unload_sd = False
variable_prime = {}
variable_respond = {}
variable_peripheral = {}
variable_run = False
gcode = 
	{% set user_z_endstop_xy = [143,256] %}
	{% set user_z_endstop_hop = 7.5 %}
	{% set user_z_home_current = 0.35 %}
	{% set user_home_accel = 1200 %}
	{% set user_bed_y_offset = 7 %}
	{% set user_z_hop_speed = 15 %}
	{% set user_retract_speed = 30 %}
	{% set user_travel_speed = 300 %}
	{% set user_probe_dock_speed = 50 %}
	{% set user_filament_load_speed = 50 %}
	{% set user_wipe_speed = 200 %}
	{% set user_prime_speed = 25 %}
	{% set user_probe_dock_pos = [181,251] %}
	{% set user_probe_delta_x = 30 %}
	{% set user_probe_delta_y = -30 %}
	{% set user_z_probe_hop = 15.5 %}
	{% set user_park_xy_delta = 25 %}
	{% set user_park_z_max_delta = 40 %}
	{% set user_park_z_min = 30 %}
	{% set user_park_pause_z_delta = 2.0 %}
	{% set user_park_at_cancel = true %}
	{% set user_extruder_min_add = 30 %}
	{% set user_load_distance = 90 %}
	{% set user_load_extrude = 50 %}
	{% set user_unload_distance = 75 %}
	{% set user_retract_end = 2 %}
	{% set user_retract_pause = 1 %}
	{% set user_brush_pos = 'left' %}
	{% set user_brush_x_middle = 52 %}
	{% set user_brush_x_width = 45 %}
	{% set user_brush_y_start = 256 %}
	{% set user_wipe_z = 0.5 %}
	{% set user_wipe_cnt = 5 %}
	{% set user_z_purge = 2.5 %}
	{% set user_print_start_bed_up = 10 %}
	{% set user_print_start_ival = 1 %}
	{% set user_print_start_extruder_time = 0.5 %}
	{% set user_print_start_bed_time = 0.5 %}
	{% set user_print_start_prime_mult = 2 %}
	{% set user_unload_sd = True %}
	{% set user_prime_start_xy = [5.0,30.0] %}
	{% set user_prime_z = 0.2 %}
	{% set user_prime_dir = 'Y+' %}
	{% set user_prime_spacing = 0.4 %}
	{% set user_prime_length = 220 %}
	{% set user_prime_seg = 11 %}
	{% set user_prime_extrude_per_seg = 2 %}
	{% set user_respond_set_z_current = 0 %}
	{% set user_respond_set_acc = 0 %}
	{% set user_respond_probe_action = 1 %}
	{% set user_respond_layer = 0 %}
	{% set user_filter_on = 0 %}
	{% set user_filter_use_time = 0 %}
	{% set user_vent_on = 0 %}
	{% set user_caselight_on = 0.2 %}
	{% set user_fan_run_after_print = 0 %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set cfg_endstop_z_offset = printer.configfile.settings.stepper_z.position_endstop|default(0.0)|float %}
	{% set hw_dic = {'display'       : {'ena' : True if 'neopixel neo_display' in printer.configfile.settings
	else False},
	'chamber'       : {'type': 'sensor' if 'temperature_sensor chamber' in printer.configfile.settings
	else 'fan'    if 'temperature_fan chamber' in printer.configfile.settings
	else 'none'},
	'caselight'     : {'ena' : True if 'output_pin caselight' in printer.configfile.settings
	else False},
	'filter'        : {'ena' : True if 'fan_generic filter' in printer.configfile.settings
	else False},
	'runout'        : {'type': 'switch' if 'filament_switch_sensor runout' in printer.configfile.settings
	else 'motion' if 'filament_motion_sensor runout' in printer.configfile.settings
	else 'file'   if 'save_variables' in printer and filament_loaded in printer.save_variables.variables
	else 'none'},
	'relay'         : {'ena' : True if 'output_pin extruder_relay' in printer.configfile.settings and
	'output_pin heater_bed_relay' in printer.configfile.settings
	else False},
	'auto_z_offset' : {'type': 'z_calib+flexplate' if 'z_calibration' in printer and 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'z_calib'           if 'z_calibration' in printer
	else 'flexplate'         if 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'none'},
	'mag_probe'     : {'ena' : True if printer['gcode_macro _MAG_PROBE'] is defined or 'dockable_probe' in printer
	else False},
	'endstop_temp'  : {'ena' : True if 'temperature_sensor endstop' in printer.configfile.settings
	else False}}%}
	{% set _dummy = hw_dic.chamber.update({'ena': True if hw_dic.chamber.type != 'none' else False}) %}
	{% set _dummy = hw_dic.chamber.update({'fan': True if hw_dic.chamber.type == 'fan' else False}) %}
	{% set _dummy = hw_dic.runout.update({'ena': True if hw_dic.runout.type != 'none' else False}) %}
	{% set _dummy = hw_dic.runout.update({'sensor': True if hw_dic.runout.type == 'switch' or hw_dic.runout.type == 'motion'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'ena': True if hw_dic.auto_z_offset.type != 'none' else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'auto': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'z_calib'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'manu': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'flexplate'
	else False}) %}
	{% set bed = {'min': {'x': min.x, 'y': min.y                    , 'z': 0    },
	'max': {'x': max.x, 'y': max.y - user_bed_y_offset, 'z': max.z}} %}
	{% set calc_center = {'x': (bed.max.x - bed.min.x) / 2,
	'y': (bed.max.y - bed.min.y) / 2,
	'z': (bed.max.z - bed.min.z) / 2} %}
	{% set calc_park = {'min': {'x': bed.min.x + user_park_xy_delta,
	'y': bed.min.y + user_park_xy_delta,
	'z': bed.min.z + user_park_z_min},
	'max': {'x': bed.max.x - user_park_xy_delta,
	'y': bed.max.y - user_park_xy_delta,
	'z': bed.max.z - user_park_z_max_delta}} %}
	{% set calc_z_endstop_z = cfg_endstop_z_offset|round(0, 'ceil') + 1.0 if cfg_endstop_z_offset > 0 else 1.0 %}
	{% set calc_z_hop = user_z_probe_hop if hw_dic.mag_probe.ena and user_z_probe_hop > user_z_endstop_hop
	else user_z_endstop_hop %}
	{% set calc_brush = {'start': user_brush_x_middle - user_brush_x_width / 2,
	'end'  : user_brush_x_middle + user_brush_x_width / 2} %}
	{% set calc_purge = {'x': (min.x + calc_brush.start) / 2 if user_brush_pos|lower == 'left'
	else max.x - (max.x - calc_brush.end) / 2,
	'y': max.y} %}
	{% set calc_wipe = {'start': {'x': calc_brush.start if user_brush_pos|lower == 'left'
	else calc_brush.end,
	'y': user_brush_y_start},
	'end'  : {'x': calc_brush.end if user_brush_pos|lower == 'left'
	else calc_brush.start,
	'y': max.y}} %}
	{% set homing_dic = {'z_endstop': {'x':user_z_endstop_xy[0], 'y':user_z_endstop_xy[1], 'z':calc_z_endstop_z, 'hop':user_z_endstop_hop},
	'z_current': user_z_home_current,
	'accel'    : user_home_accel} %}
	{% set purge_dic = {'purge' : {'x':calc_purge.x, 'y':calc_purge.y, 'z':user_z_purge},
	'wipe'  : {'start'  : {'x': calc_wipe.start.x, 'y': calc_wipe.start.y, 'z':user_wipe_z},
	'end'    : {'x': calc_wipe.end.x,   'y': calc_wipe.end.y,   'z':user_wipe_z},
	'offset' : (calc_wipe.end.y - calc_wipe.start.y) / user_wipe_cnt,
	'cnt'    : user_wipe_cnt}} %}
	{% set probe_dic = {'dock'        : {'x'    : user_probe_dock_pos[0],
	'y'    : user_probe_dock_pos[1] + user_probe_delta_y},
	'store'       : {'x'    : user_probe_dock_pos[0] + user_probe_delta_x,
	'y'    : user_probe_dock_pos[1]}} %}
	{% set speed_dic = {'z_hop'   : (user_z_hop_speed * 60),
	'retract' : (user_retract_speed * 60),
	'travel'  : (user_travel_speed * 60),
	'dock'    : (user_probe_dock_speed * 60),
	'load'    : (user_filament_load_speed * 60),
	'wipe'    : (user_wipe_speed * 60),
	'prime'   : (user_prime_speed * 60)} %}
	{% set park_dic = {'bed'           : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_park.min.z},
	'center'        : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_center.z},
	'front'         : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.max.z},
	'frontlow'      : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.min.z},
	'rear'          : {'x': calc_park.min.x, 'y': calc_park.max.y, 'z': calc_park.max.z},
	'pause'         : {'x': calc_purge.x,    'y': calc_purge.y,   'dz': user_park_pause_z_delta},
	'park_at_cancel': user_park_at_cancel} %}
	{% set filament_dic = {'load_distance'   : user_load_distance,
	'load_extrude'    : user_load_extrude,
	'unload_distance' : user_unload_distance,
	'retract'         : {'end'   : user_retract_end,
	'pause' : user_retract_pause,
	'cancel': user_retract_end - user_retract_pause}} %}
	{% set prime_dic = {'pos'             : {'x':user_prime_start_xy[0], 'y':user_prime_start_xy[1], 'z':user_prime_z},
	'dir'             : user_prime_dir,
	'spacing'         : user_prime_spacing,
	'length_per_seg'  : user_prime_length / user_prime_seg,
	'seg'             : user_prime_seg,
	'extrude_per_seg' : user_prime_extrude_per_seg} %}
	{% set print_start_dic = {'bed_up'     : user_print_start_bed_up|float|round(1),
	'ival'       : user_print_start_ival|int,
	'time'       : {'extruder' : (user_print_start_extruder_time * 60)|int,
	'bed'      : (user_print_start_bed_time * 60)|int},
	'prime_mult' : user_print_start_prime_mult|float} %}
	{% set respond_dic = {'z_current'    : user_respond_set_z_current,
	'acc'          : user_respond_set_acc,
	'probe_action' : user_respond_probe_action,
	'layer'        : user_respond_layer} %}
	{% set peripheral_dic =  {'filter'     : {'on_val'          : user_filter_on,
	'warning'         : user_filter_use_time,
	'run_after_print' : (user_fan_run_after_print * 60)},
	'vent'      : {'on_val'          : user_vent_on,
	'run_after_print' : ((user_fan_run_after_print * 60) + 5)},
	'caselight' : {'on_val' : user_caselight_on}} %}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=hw VALUE="{hw_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=homing VALUE="{homing_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=z_hop VALUE={calc_z_hop}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=speed VALUE="{speed_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=probe VALUE="{probe_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=park VALUE="{park_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=filament VALUE="{filament_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=purge VALUE="{purge_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=print_start VALUE="{print_start_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=unload_sd VALUE={user_unload_sd}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=prime VALUE="{prime_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=respond VALUE="{respond_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=peripheral VALUE="{peripheral_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=run VALUE=True

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	G90
	G1 X{mid_x - size / 2} Y{mid_y - size / 2} Z{z_height} F{feedrate_travel}
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G1 X{mid_x + size / 2} F{curr_speed}
	G1 Y{mid_y + size / 2} F{curr_speed}
	G1 X{mid_x - size / 2} F{curr_speed}
	G1 Y{mid_y - size / 2} F{curr_speed}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=VIBRATIONS
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[neopixel lcd]
pin = EXP1_6
chain_count = 3
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
color_order = RGB

[gcode_macro LCDRGB]
gcode = 
	{% set r = params.R|default(1)|float %}
	{% set g = params.G|default(1)|float %}
	{% set b = params.B|default(1)|float %}
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=3

[gcode_macro RESETRGB]
gcode = 
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=3

[delayed_gcode SETDISPLAYNEOPIXEL]
initial_duration = 1
gcode = 
	RESETRGB

[exclude_object]

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_2B001000105053424E363620-if00

[virtual_sdcard]
path = /home/pi/gcode_files

[gcode_arcs]
resolution = 0.1

[idle_timeout]
timeout = 2700

[printer]
kinematics = corexy
max_velocity = 500
max_accel = 10000
max_z_velocity = 15
max_z_accel = 50
square_corner_velocity = 8.0

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 70.8
shaper_type_y = mzv
shaper_freq_y = 58.2

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345]
cs_pin = rpi:None

[resonance_tester]
accel_chip = adxl345
probe_points = 
	125, 125, 5

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG6
position_min = 0
position_endstop = 247
position_max = 247
homing_speed = 80
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG9
position_min = 0
position_endstop = 257
position_max = 257
homing_speed = 60
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG10
position_max = 250
position_min = -2.5
homing_speed = 10.0
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = -0.369

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = PC1
enable_pin = !PA0
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE6
dir_pin = !PA14
enable_pin = !PE0
rotation_distance = 5.613
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PF4
min_temp = 0
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
max_extrude_only_distance = 200
pressure_advance = 0.04
pressure_advance_smooth_time = 0.040
control = pid
pid_kp = 29.726
pid_ki = 3.539
pid_kd = 62.424

[tmc2209 extruder]
uart_pin = PD3
interpolate = false
run_current = 0.55
sense_resistor = 0.110
stealthchop_threshold = 0

[verify_heater extruder]
max_error = 120
check_gain_time = 20
hysteresis = 5
heating_gain = 2

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.68
min_temp = 0
max_temp = 120
control = pid
pid_kp = 38.757
pid_ki = 1.485
pid_kd = 252.888

[verify_heater heater_bed]
max_error = 120
check_gain_time = 90
hysteresis = 5
heating_gain = 2

[probe]
pin = PG15
x_offset = 0
y_offset = 19.75
z_offset = 6.42
speed = 10
lift_speed = 25
samples = 3
samples_result = median
sample_retract_dist = 0.8
samples_tolerance = 0.007
samples_tolerance_retries = 10

[z_tilt]
z_positions = 
	-46, 20
	125, 313
	296, 20
points = 
	30, 5
	125, 195
	220, 5
speed = 350
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075

[bed_mesh]
speed = 350
horizontal_move_z = 10
mesh_min = 40,40
mesh_max = 210,210
fade_start = 0.6
fade_end = 10.0
probe_count = 9,9
algorithm = bicubic
relative_reference_index = 12
mesh_pps = 2,2

[output_pin light]
pin = PB10
pwm = true
shutdown_value = 0
value = 100
scale = 100
cycle_time = 0.010

[gcode_macro light_off]
gcode = 
	set_pin pin=light value=0

[gcode_macro light_dim]
gcode = 
	set_pin pin=light value=25

[gcode_macro light_on]
gcode = 
	{% set S = params.S|default(100)|float %}
	set_pin pin=light value={S}

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
max_temp = 100

[temperature_sensor chamber]
sensor_type = Generic 3950
sensor_pin = PF5
min_temp = 0
max_temp = 75
gcode_id = chamber
=======================
Declaration of '__main __octoprint' hides previous menuitem declaration
Declaration of '__main __setup __calib __delta_calib_auto' hides previous menuitem declaration
Declaration of '__main __setup __calib __delta_calib_man' hides previous menuitem declaration
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1965957608: New connection
webhooks client 1965957608: Client info {'program': 'Moonraker', 'version': 'v0.7.1-783-gf7d8af6'}
Loaded MCU 'mcu' 105 commands (v0.10.0-477-g55d1c372 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
mcu 'rpi': Starting connect
Loaded MCU 'rpi' 111 commands (v0.10.0-571-g97a5b39a / gcc: (Raspbian 8.3.0-6+rpi1) 8.3.0 binutils: (GNU Binutils for Raspbian) 2.31.1)
MCU 'rpi' config: PCA9685_MAX=4096 ADC_MAX=4095 PWM_MAX=32768 CLOCK_FREQ=50000000 MCU=linux STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-268.181818 slope=1294.861660
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'rpi' printer configuration...
Configured MCU 'rpi' (1024 moves)
Starting heater checks for extruder
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 20.2)    | (40.0, 40.0)
  1   | (61.2, 20.2)    | (61.2, 40.0)
  2   | (82.5, 20.2)    | (82.5, 40.0)
  3   | (103.8, 20.2)   | (103.8, 40.0)
  4   | (125.0, 20.2)   | (125.0, 40.0)
  5   | (146.2, 20.2)   | (146.2, 40.0)
  6   | (167.5, 20.2)   | (167.5, 40.0)
  7   | (188.8, 20.2)   | (188.8, 40.0)
  8   | (210.0, 20.2)   | (210.0, 40.0)
  9   | (210.0, 41.5)   | (210.0, 61.2)
  10  | (188.8, 41.5)   | (188.8, 61.2)
  11  | (167.5, 41.5)   | (167.5, 61.2)
  12  | (146.2, 41.5)   | (146.2, 61.2)
  13  | (125.0, 41.5)   | (125.0, 61.2)
  14  | (103.8, 41.5)   | (103.8, 61.2)
  15  | (82.5, 41.5)    | (82.5, 61.2)
  16  | (61.2, 41.5)    | (61.2, 61.2)
  17  | (40.0, 41.5)    | (40.0, 61.2)
  18  | (40.0, 62.8)    | (40.0, 82.5)
  19  | (61.2, 62.8)    | (61.2, 82.5)
  20  | (82.5, 62.8)    | (82.5, 82.5)
  21  | (103.8, 62.8)   | (103.8, 82.5)
  22  | (125.0, 62.8)   | (125.0, 82.5)
  23  | (146.2, 62.8)   | (146.2, 82.5)
  24  | (167.5, 62.8)   | (167.5, 82.5)
  25  | (188.8, 62.8)   | (188.8, 82.5)
  26  | (210.0, 62.8)   | (210.0, 82.5)
  27  | (210.0, 84.0)   | (210.0, 103.8)
  28  | (188.8, 84.0)   | (188.8, 103.8)
  29  | (167.5, 84.0)   | (167.5, 103.8)
  30  | (146.2, 84.0)   | (146.2, 103.8)
  31  | (125.0, 84.0)   | (125.0, 103.8)
  32  | (103.8, 84.0)   | (103.8, 103.8)
  33  | (82.5, 84.0)    | (82.5, 103.8)
  34  | (61.2, 84.0)    | (61.2, 103.8)
  35  | (40.0, 84.0)    | (40.0, 103.8)
  36  | (40.0, 105.2)   | (40.0, 125.0)
  37  | (61.2, 105.2)   | (61.2, 125.0)
  38  | (82.5, 105.2)   | (82.5, 125.0)
  39  | (103.8, 105.2)  | (103.8, 125.0)
  40  | (125.0, 105.2)  | (125.0, 125.0)
  41  | (146.2, 105.2)  | (146.2, 125.0)
  42  | (167.5, 105.2)  | (167.5, 125.0)
  43  | (188.8, 105.2)  | (188.8, 125.0)
  44  | (210.0, 105.2)  | (210.0, 125.0)
  45  | (210.0, 126.5)  | (210.0, 146.2)
  46  | (188.8, 126.5)  | (188.8, 146.2)
  47  | (167.5, 126.5)  | (167.5, 146.2)
  48  | (146.2, 126.5)  | (146.2, 146.2)
  49  | (125.0, 126.5)  | (125.0, 146.2)
  50  | (103.8, 126.5)  | (103.8, 146.2)
  51  | (82.5, 126.5)   | (82.5, 146.2)
  52  | (61.2, 126.5)   | (61.2, 146.2)
  53  | (40.0, 126.5)   | (40.0, 146.2)
  54  | (40.0, 147.8)   | (40.0, 167.5)
  55  | (61.2, 147.8)   | (61.2, 167.5)
  56  | (82.5, 147.8)   | (82.5, 167.5)
  57  | (103.8, 147.8)  | (103.8, 167.5)
  58  | (125.0, 147.8)  | (125.0, 167.5)
  59  | (146.2, 147.8)  | (146.2, 167.5)
  60  | (167.5, 147.8)  | (167.5, 167.5)
  61  | (188.8, 147.8)  | (188.8, 167.5)
  62  | (210.0, 147.8)  | (210.0, 167.5)
  63  | (210.0, 169.0)  | (210.0, 188.8)
  64  | (188.8, 169.0)  | (188.8, 188.8)
  65  | (167.5, 169.0)  | (167.5, 188.8)
  66  | (146.2, 169.0)  | (146.2, 188.8)
  67  | (125.0, 169.0)  | (125.0, 188.8)
  68  | (103.8, 169.0)  | (103.8, 188.8)
  69  | (82.5, 169.0)   | (82.5, 188.8)
  70  | (61.2, 169.0)   | (61.2, 188.8)
  71  | (40.0, 169.0)   | (40.0, 188.8)
  72  | (40.0, 190.2)   | (40.0, 210.0)
  73  | (61.2, 190.2)   | (61.2, 210.0)
  74  | (82.5, 190.2)   | (82.5, 210.0)
  75  | (103.8, 190.2)  | (103.8, 210.0)
  76  | (125.0, 190.2)  | (125.0, 210.0)
  77  | (146.2, 190.2)  | (146.2, 210.0)
  78  | (167.5, 190.2)  | (167.5, 210.0)
  79  | (188.8, 190.2)  | (188.8, 210.0)
  80  | (210.0, 190.2)  | (210.0, 210.0)
bed_mesh: relative_reference_index 12 is (146.25, 61.25)
Stats 43.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=3295 bytes_read=6348 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3017 freq=180008167 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=817 bytes_read=4469 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50001590 adj=50001165  heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=0.0 chamber: temp=0.0 sysload=2.21 cputime=15.103 memavail=685044 print_time=0.008 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965957608
webhooks: registering remote method 'reboot_machine' for connection id: 1965957608
webhooks: registering remote method 'pause_job_queue' for connection id: 1965957608
webhooks: registering remote method 'start_job_queue' for connection id: 1965957608
webhooks: registering remote method 'timelapse_newframe' for connection id: 1965957608
webhooks: registering remote method 'timelapse_saveFrames' for connection id: 1965957608
webhooks: registering remote method 'timelapse_render' for connection id: 1965957608
Klipper INIT done
Stats 44.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=7173 bytes_read=6773 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=180003088 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=823 bytes_read=4485 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999903 adj=49998671  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=23.5 chamber: temp=19.3 sysload=2.21 cputime=15.387 memavail=685316 print_time=46.830 buffer_time=0.250 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 45.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=7656 bytes_read=7056 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=180002110 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=829 bytes_read=4501 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999465 adj=49998669  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=21.9 chamber: temp=19.3 sysload=2.20 cputime=15.429 memavail=685084 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 46.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=7723 bytes_read=7260 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001769 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000023 bytes_write=835 bytes_read=4532 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49998525  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=21.9 chamber: temp=19.3 sysload=2.20 cputime=15.458 memavail=692308 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 47.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=7729 bytes_read=7453 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001799 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000023 bytes_write=841 bytes_read=4548 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999422 adj=49999321  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.0 chamber: temp=19.3 sysload=2.20 cputime=15.489 memavail=692308 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 48.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7735 bytes_read=7707 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001695 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000023 bytes_write=847 bytes_read=4564 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999564 adj=49998894  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=22.1 chamber: temp=19.3 sysload=2.20 cputime=15.530 memavail=692308 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 49.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7741 bytes_read=7915 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001793 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000023 bytes_write=853 bytes_read=4580 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999336  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.0 chamber: temp=19.3 sysload=2.20 cputime=15.569 memavail=692304 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 50.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7747 bytes_read=8108 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001798 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000023 bytes_write=859 bytes_read=4596 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999812 adj=49997726  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.1 chamber: temp=19.3 sysload=2.10 cputime=15.607 memavail=692320 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 51.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7753 bytes_read=8345 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001710 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=865 bytes_read=4625 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999889 adj=49998526  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.2 chamber: temp=19.2 sysload=2.10 cputime=15.645 memavail=692760 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 52.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000025 mcu_task_stddev=0.000051 bytes_write=7759 bytes_read=8553 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001695 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=877 bytes_read=4657 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999951 adj=49999055  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.2 chamber: temp=19.3 sysload=2.10 cputime=15.682 memavail=692708 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 53.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7765 bytes_read=8760 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001711 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=883 bytes_read=4673 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999958 adj=49999371  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.0 chamber: temp=19.3 sysload=2.10 cputime=15.720 memavail=692748 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 54.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7771 bytes_read=8997 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001835 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=889 bytes_read=4689 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999973 adj=49999405  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.1 chamber: temp=19.3 sysload=2.10 cputime=15.757 memavail=692748 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 55.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7777 bytes_read=9205 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001792 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=895 bytes_read=4705 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999979 adj=49999345  heater_bed: target=0 temp=19.2 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.4 chamber: temp=19.3 sysload=2.09 cputime=15.792 memavail=692708 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 56.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7783 bytes_read=9398 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001787 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=901 bytes_read=4734 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000022 adj=49999451  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.2 chamber: temp=19.3 sysload=2.09 cputime=15.828 memavail=692756 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 57.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7789 bytes_read=9635 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001766 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=907 bytes_read=4750 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000031 adj=49999646  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.4 chamber: temp=19.3 sysload=2.09 cputime=15.865 memavail=692772 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 58.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7795 bytes_read=9857 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001751 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=913 bytes_read=4766 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999686  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.4 chamber: temp=19.3 sysload=2.09 cputime=15.904 memavail=692776 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 59.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7801 bytes_read=10050 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001760 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=919 bytes_read=4782 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000012 adj=49999598  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.2 chamber: temp=19.4 sysload=2.09 cputime=15.939 memavail=692776 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 60.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7807 bytes_read=10287 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001764 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=925 bytes_read=4798 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000010 adj=49999547  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.3 chamber: temp=19.3 sysload=2.00 cputime=15.976 memavail=692776 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 61.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7813 bytes_read=10495 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001799 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=931 bytes_read=4827 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999998 adj=49999527  heater_bed: target=0 temp=19.2 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.3 chamber: temp=19.3 sysload=2.00 cputime=16.012 memavail=692780 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 62.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7819 bytes_read=10688 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001808 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=937 bytes_read=4843 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999997 adj=49999410  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.3 chamber: temp=19.2 sysload=2.00 cputime=16.047 memavail=692780 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 63.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7825 bytes_read=10939 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001785 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=943 bytes_read=4859 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000006 adj=49999410  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.4 chamber: temp=19.3 sysload=2.00 cputime=16.084 memavail=692780 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 64.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7831 bytes_read=11147 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001785 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=949 bytes_read=4875 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000022 adj=49999520  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.3 chamber: temp=19.3 sysload=2.00 cputime=16.121 memavail=693012 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 65.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7837 bytes_read=11340 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001785 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=955 bytes_read=4891 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000015 adj=49999614  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.3 chamber: temp=19.3 sysload=1.92 cputime=16.157 memavail=693012 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 66.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7843 bytes_read=11577 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001768 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=961 bytes_read=4920 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999549  heater_bed: target=0 temp=19.2 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.3 chamber: temp=19.3 sysload=1.92 cputime=16.194 memavail=693036 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 67.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7849 bytes_read=11785 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001771 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=967 bytes_read=4936 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000015 adj=49999580  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.4 chamber: temp=19.3 sysload=1.92 cputime=16.231 memavail=693044 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 68.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7855 bytes_read=11992 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001772 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=973 bytes_read=4952 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000009 adj=49999553  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.5 chamber: temp=19.3 sysload=1.92 cputime=16.269 memavail=693044 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 69.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7861 bytes_read=12218 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001766 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=979 bytes_read=4968 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999503  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.5 chamber: temp=19.3 sysload=1.92 cputime=16.307 memavail=693044 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 70.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7867 bytes_read=12416 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001759 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=985 bytes_read=4984 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000026 adj=49999565  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.5 chamber: temp=19.3 sysload=1.85 cputime=16.345 memavail=692796 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 71.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7873 bytes_read=12608 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001758 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=991 bytes_read=5013 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000025 adj=49999636  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.5 chamber: temp=19.3 sysload=1.85 cputime=16.380 memavail=693040 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 72.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7885 bytes_read=12845 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=391 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001757 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=997 bytes_read=5029 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000013 adj=49999607  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.6 chamber: temp=19.3 sysload=1.85 cputime=16.418 memavail=693040 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 73.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7891 bytes_read=13083 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001755 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1003 bytes_read=5045 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999986 adj=49999506  heater_bed: target=0 temp=19.2 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.4 chamber: temp=19.3 sysload=1.85 cputime=16.457 memavail=692508 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 74.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7897 bytes_read=13276 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1009 bytes_read=5061 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999891 adj=49999317  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.6 chamber: temp=19.2 sysload=1.85 cputime=16.494 memavail=692548 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 75.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7903 bytes_read=13513 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001757 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1015 bytes_read=5077 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999748 adj=49998621  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.5 chamber: temp=19.2 sysload=1.78 cputime=16.531 memavail=692548 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 76.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7909 bytes_read=13721 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001755 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1021 bytes_read=5106 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49997709  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.5 chamber: temp=19.3 sysload=1.78 cputime=16.566 memavail=692444 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 77.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7915 bytes_read=13914 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001756 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1027 bytes_read=5122 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999372 adj=49996707  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.6 chamber: temp=19.3 sysload=1.78 cputime=16.602 memavail=692548 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 78.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7921 bytes_read=14165 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001758 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1033 bytes_read=5138 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999153 adj=49995672  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.6 chamber: temp=19.3 sysload=1.78 cputime=16.639 memavail=692548 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 79.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7927 bytes_read=14373 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001759 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1039 bytes_read=5154 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998921 adj=49994664  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.8 chamber: temp=19.2 sysload=1.78 cputime=16.675 memavail=692560 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 80.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7933 bytes_read=14566 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001763 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1045 bytes_read=5170 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998689 adj=49993705  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.5 chamber: temp=19.4 sysload=1.72 cputime=16.710 memavail=692560 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 81.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7939 bytes_read=14803 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001773 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1051 bytes_read=5199 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998477 adj=49992892  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.7 chamber: temp=19.3 sysload=1.72 cputime=16.747 memavail=692408 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 82.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7945 bytes_read=15011 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001769 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1057 bytes_read=5215 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998242 adj=49992353  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.6 chamber: temp=19.3 sysload=1.72 cputime=16.783 memavail=692476 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 83.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7951 bytes_read=15218 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001763 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1063 bytes_read=5231 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998016 adj=49991683  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.6 chamber: temp=19.3 sysload=1.72 cputime=16.819 memavail=692476 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 84.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7957 bytes_read=15455 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001772 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1069 bytes_read=5247 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49997800 adj=49991185  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.72 cputime=16.855 memavail=692556 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 85.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7963 bytes_read=15663 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001771 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1075 bytes_read=5263 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49997598 adj=49990772  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.6 chamber: temp=19.3 sysload=1.66 cputime=16.892 memavail=692568 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 86.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7969 bytes_read=15856 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001766 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1081 bytes_read=5292 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49997410 adj=49990540  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.7 chamber: temp=19.5 sysload=1.66 cputime=16.928 memavail=692568 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 87.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7975 bytes_read=16093 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001765 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1087 bytes_read=5308 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49997222 adj=49990423  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.66 cputime=16.965 memavail=692568 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 88.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7981 bytes_read=16315 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001765 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1093 bytes_read=5324 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49997051 adj=49990221  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.7 chamber: temp=19.3 sysload=1.66 cputime=17.002 memavail=692612 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 89.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7987 bytes_read=16508 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001766 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1099 bytes_read=5340 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996899 adj=49990196  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.7 chamber: temp=19.3 sysload=1.66 cputime=17.038 memavail=692612 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 90.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7993 bytes_read=16745 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001762 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1105 bytes_read=5356 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996753 adj=49990288  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.7 chamber: temp=19.2 sysload=1.61 cputime=17.074 memavail=692580 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 91.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7999 bytes_read=16953 bytes_retransmit=9 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001759 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1111 bytes_read=5385 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996617 adj=49990355  heater_bed: target=0 temp=19.2 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.61 cputime=17.112 memavail=693040 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 92.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8005 bytes_read=17146 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001767 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1117 bytes_read=5401 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996490 adj=49990475  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.7 chamber: temp=19.3 sysload=1.61 cputime=17.148 memavail=693080 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 93.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8011 bytes_read=17385 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1123 bytes_read=5417 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996377 adj=49990567  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.61 cputime=17.187 memavail=693080 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 94.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8017 bytes_read=17583 bytes_retransmit=9 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001768 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1129 bytes_read=5433 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996276 adj=49990781  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.6 chamber: temp=19.2 sysload=1.61 cputime=17.226 memavail=692744 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 95.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8023 bytes_read=17776 bytes_retransmit=9 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001777 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1135 bytes_read=5449 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996183 adj=49990981  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.48 cputime=17.264 memavail=692840 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 96.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8029 bytes_read=18013 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001773 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1141 bytes_read=5477 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996098 adj=49991177  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.9 chamber: temp=19.2 sysload=1.48 cputime=17.302 memavail=692840 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 97.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8035 bytes_read=18221 bytes_retransmit=9 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001772 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1147 bytes_read=5492 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996029 adj=49991411  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.7 chamber: temp=19.3 sysload=1.48 cputime=17.338 memavail=692572 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 98.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8041 bytes_read=18428 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001773 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1153 bytes_read=5507 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995961 adj=49991718  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=32.2 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.48 cputime=17.374 memavail=692796 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 99.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8047 bytes_read=18665 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001765 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1159 bytes_read=5522 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995899 adj=49991939  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.9 chamber: temp=19.3 sysload=1.48 cputime=17.415 memavail=692728 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 100.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8053 bytes_read=18873 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001758 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1165 bytes_read=5537 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995844 adj=49992159  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.8 chamber: temp=19.3 sysload=1.36 cputime=17.489 memavail=690692 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 101.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8059 bytes_read=19066 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001752 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1171 bytes_read=5566 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995805 adj=49992380  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.9 chamber: temp=19.3 sysload=1.36 cputime=17.560 memavail=690848 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 102.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8065 bytes_read=19303 bytes_retransmit=9 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1177 bytes_read=5582 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995772 adj=49992714  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=22.9 chamber: temp=19.3 sysload=1.36 cputime=17.630 memavail=690936 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 103.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8071 bytes_read=19525 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001750 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1183 bytes_read=5598 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995745 adj=49992987  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=32.7 mcu_temp: temp=22.9 chamber: temp=19.2 sysload=1.36 cputime=17.698 memavail=690900 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 104.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=8077 bytes_read=19718 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001745 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1189 bytes_read=5614 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49995728 adj=49993266  heater_bed: target=0 temp=19.3 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=23.0 chamber: temp=19.3 sysload=1.36 cputime=17.768 memavail=690940 print_time=46.830 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
webhooks client 1965957608: Disconnected
webhooks client 1971333480: New connection
webhooks client 1971333480: Client info {'program': 'Moonraker', 'version': 'v0.7.1-783-gf7d8af6'}
webhooks: registering remote method 'shutdown_machine' for connection id: 1971333480
webhooks: registering remote method 'reboot_machine' for connection id: 1971333480
webhooks: registering remote method 'pause_job_queue' for connection id: 1971333480
webhooks: registering remote method 'start_job_queue' for connection id: 1971333480
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.11.0-41-g9b60daf6'
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Wed Dec 28 10:00:10 2022 (1672239610.0 25.7)
===== Config file =====
[gcode_shell_command hello_world]
command = echo hello world
timeout = 2.
verbose = True

[gcode_macro HELLO_WORLD]
gcode = 
	RUN_SHELL_COMMAND CMD=hello_world

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro clean_nozzle]
variable_location_bucket_rear = True
variable_enable_purge = False
variable_purge_len = 10
variable_purge_spd = 150
variable_purge_temp_min = 200
variable_purge_ret = 11
variable_ooze_dwell = 2
variable_brush_top = 0.3
variable_clearance_z = 5
variable_wipe_qty = 3
variable_prep_spd_xy = 3000
variable_prep_spd_z = 300
variable_wipe_spd_xy = 5000
variable_brush_start = 30
variable_brush_width = 45
variable_brush_front = 0
variable_brush_depth = 0
variable_bucket_left_width = 25
variable_bucket_right_width = 25
variable_bucket_gap = 22
variable_bucket_start = 0
variable_bucket_pos = 1
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	SAVE_GCODE_STATE NAME=clean_nozzle
	G90
	{% set Ry = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% if enable_purge %}
	SET_GCODE_VARIABLE MACRO=clean_nozzle VARIABLE=bucket_pos VALUE={(range(2) | random)}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	{% if location_bucket_rear %}
	G1 Y{Ry} F{prep_spd_xy}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)} F{prep_spd_xy}
	{% endif %}
	G1 X{bucket_start + (bucket_left_width / (2 - bucket_pos)) + (bucket_pos * bucket_gap) + (bucket_pos * (bucket_right_width / 2))}
	{% if printer.extruder.temperature >= purge_temp_min %}
	M83      ; relative mode
	G1 E{purge_len} F{purge_spd}
	G1 E-{purge_ret} F{purge_spd * 5}
	G4 P{ooze_dwell * 1000}
	G92 E0   ; reset extruder
	{% endif %}
	{% endif %}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{brush_start + (brush_width * bucket_pos)} F{prep_spd_xy}
	{% if location_bucket_rear %}
	G1 Y{Ry}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)}
	{% endif %}
	G1 Z{brush_top} F{prep_spd_z}
	{% for wipes in range(1, (wipe_qty + 1)) %}
	G1 X{brush_start + (brush_width * (1 - bucket_pos))} F{wipe_spd_xy}
	G1 X{brush_start + (brush_width * bucket_pos)} F{wipe_spd_xy}
	{% endfor %}
	M117 Cleaned!
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{bucket_left_width / 4} F{prep_spd_xy}
	RESTORE_GCODE_STATE NAME=clean_nozzle
	{% else %}
	{ action_raise_error("Please home your axes!") }
	M117 Please home first!
	{% endif %}

[menu __mymain __tune]
type = list
enable = {printer.idle_timeout.state == "Printing"}
name = Tune

[menu __mymain __tune __speed]
type = input
name = Speed: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.speed_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M220 S{'%d' % (menu.input*100)}

[menu __mymain __tune __flow]
type = input
name = Flow: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.extrude_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M221 S{'%d' % (menu.input*100)}

[menu __mymain __tune __fanspeed]
type = input
enable = {'fan' in printer}
name = Fan speed: {'%3d' % (menu.input*100)}%
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 0.01
gcode = 
	M106 S{'%d' % (menu.input*255)}

[menu __mymain __tune __offsetz]
type = input
name = Offset Z:{'%05.3f' % menu.input}
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __control]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Control

[menu __mymain __control __move_x]
type = list
name = Move X

[menu __mymain __control __move_x __move_10mm]
type = input
name = X(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_1mm]
type = input
name = X(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_01mm]
type = input
name = X(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y]
type = list
name = Move Y

[menu __mymain __control __move_y __move_10mm]
type = input
name = Y(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_1mm]
type = input
name = Y(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_01mm]
type = input
name = Y(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z]
type = list
name = Move Z

[menu __mymain __control __move_z __move_10mm]
type = input
name = Z(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_1mm]
type = input
name = Z(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_01mm]
type = input
name = Z(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 0.10
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e]
type = list
name = Move E

[menu __mymain __control __move_e __move_10mm]
type = input
name = E(10.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E10 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_1mm]
type = input
name = E(01.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_01mm]
type = input
name = E(00.1):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E0.1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __home_all]
type = command
name = Home All
gcode = G28

[menu __mymain __control __home_x]
type = command
name = Home X
gcode = G28 X

[menu __mymain __control __home_y]
type = command
name = Home Y
gcode = G28 Y

[menu __mymain __control __home_z]
type = command
name = Home Z
gcode = G28 Z

[menu __mymain __control __disable]
type = command
name = Disable steppers
gcode = 
	M84
	M18

[menu __mymain __control __fanonoff]
type = input
enable = {'fan' in printer}
name = Fan: {'ON ' if menu.input else 'OFF'}
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 1
gcode = 
	M106 S{255 if menu.input else 0}

[menu __mymain __control __G32]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = G32
gcode = G32

[menu __mymain __control __QGL]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = QGL
gcode = QUAD_GANTRY_LEVEL

[menu __mymain __control __parkbed]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Bed
gcode = PARKBED

[menu __mymain __control __parkfront]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front
gcode = PARKFRONT

[menu __mymain __control __parkfrontlow]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front Low
gcode = PARKFRONTLOW

[menu __mymain __control __BEDFANSOFF]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansOff
gcode = BEDFANSOFF

[menu __mymain __control __BEDFANSFAST]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansFast
gcode = BEDFANSFAST

[menu __mymain __temp]
type = list
name = Temperature

[menu __mymain __temp __hotend0_target]
type = input
enable = {'extruder' in printer}
name = {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input = {printer.extruder.target}
input_min = 0
input_max = {printer.configfile.config.extruder.max_temp}
input_step = 1
gcode = M104 T0 S{'%.0f' % menu.input}

[menu __mymain __temp __hotbed_target]
type = input
enable = {'heater_bed' in printer}
name = {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
input = {printer.heater_bed.target}
input_min = 0
input_max = {printer.configfile.config.heater_bed.max_temp}
input_step = 1
gcode = M140 S{'%.0f' % menu.input}

[menu __mymain __temp __preheat]
type = list
enable = { not printer.idle_timeout.state == "Printing" }
name = Preheat

[menu __mymain __temp __preheat __preheat_pla]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = PLA - 200/60
gcode = 
	M190 S60
	M104 S200
	{ menu.exit() }

[menu __mymain __temp __cooldown]
type = list
name = Cooldown

[menu __mymain __temp __cooldown __all]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = Cooldown All
gcode = 
	M104 S0
	M140 S0
	{ menu.exit() }

[menu __mymain __temp __cooldown __hotend]
type = command
enable = {'extruder' in printer}
name = Cooldown HE
gcode = M104 S0

[menu __mymain __temp __cooldown __hotbed]
type = command
enable = {'heater_bed' in printer}
name = Cooldown HB
gcode = M140 S0

[menu __mymain __filament]
type = list
name = Filament

[menu __mymain __filament __load]
type = command
name = Load Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	LOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __unload]
type = command
name = Unload Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __feed]
type = input
name = Feed: {'%.1f' % menu.input}
input = 5
input_step = 0.1
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	M83
	G1 E{'%.1f' % menu.input} F60
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __settings]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Settings

[menu __mymain __settings __manual_mbl]
type = list
name = Manual MBL

[menu __mymain __settings __manual_mbl __zpos]
type = command
name = Z-Pos = {'%05.1f' % printer.gcode_move.position.z}

[menu __mymain __settings __manual_mbl __start]
type = command
name = Start Calibration
gcode = 
	G28
	BED_MESH_CALIBRATE METHOD=manual
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __step_down]
type = command
name = Step Down
gcode = 
	TESTZ Z=-.01

[menu __mymain __settings __manual_mbl __step_up]
type = command
name = Step Up
gcode = 
	TESTZ Z=.01

[menu __mymain __settings __manual_mbl __next]
type = command
name = Next
gcode = 
	ACCEPT
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __save]
type = command
name = Save & Restart
gcode = 
	SAVE_CONFIG
	FIRMWARE_RESTART

[menu __mymain __settings __manual_mbl __abort]
type = command
name = Abort
gcode = 
	ABORT

[menu __mymain __settings __pidtuning]
type = list
name = PID Tuning

[menu __mymain __settings __pidtuning __hotend_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == 'Printing') and ('extruder' in printer)}
name = Tune Hotend PID
gcode = PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1

[menu __mymain __settings __pidtuning __hotbed_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == "Printing") and ('heater_bed' in printer)}
name = Tune Hotbed PID
gcode = PID_CALIBRATE HEATER=heater_bed TARGET=60 WRITE_FILE=1

[menu __mymain __settings __pidtuning __save_config]
type = command
name = Save config
gcode = SAVE_CONFIG

[menu __mymain __settings __dump]
type = command
name = Dump Parameters
gcode = 
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{ action_respond_info("printer['%s'].%s = %s" % (name1, name2, printer[name1][name2])) }
	{% else %}
	{ action_respond_info("printer['%s'] = %s" % (name1, printer[name1])) }
	{% endfor %}
	{% endfor %}

[menu __mymain __settings __firmware_restart]
type = command
name = FW Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = FIRMWARE_RESTART

[menu __mymain __settings __host_restart]
type = command
name = Host Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = RESTART

[display]
menu_timeout = 60
menu_root = __mymain
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[menu __mymain]
type = list
name = Main Menu

[menu __mymain __babystep]
type = input
name = Babystep Z:{'%05.3f' % menu.input}
enable = { printer.idle_timeout.state == "Printing" }
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __printstart]
type = command
enable = {('virtual_sdcard' in printer) and not printer.print_stats.filename == "" and printer.idle_timeout.state == "Idle"}
name = Start Printing
gcode = 
	M24
	{ menu.exit() }

[menu __mymain __printpause]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Pause
gcode = 
	PAUSE
	{ menu.exit() }

[menu __mymain __printresume]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Resume
gcode = 
	RESUME
	{ menu.exit() }

[menu __mymain __printcancel]
type = command
enable = { printer.pause_resume.is_paused == true }
name = Cancel
gcode = 
	CANCEL_PRINT
	{ menu.exit() }

[menu __mymain __sdcard]
type = vsdlist
enable = {('virtual_sdcard' in printer) and printer.print_stats.filename == ""}
name = SD Card

[menu __mymain __filament __clean]
type = command
name = Clean Nozzle
gcode = 
	clean_nozzle

[menu __mymain __cooldown]
type = command
name = Cooldown
gcode = COOLDOWN

[menu __mymain __lightsoff]
type = command
name = Lights Off
gcode = light_off

[menu __mymain __lightsdim]
type = command
name = Lights Dim
gcode = light_dim

[menu __mymain __lightson]
type = command
name = Lights On
gcode = light_on

[menu __mymain __shutdown]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Shut down
gcode = SHUTDOWN

[delayed_gcode _menu_pi_shutdown]
gcode = 
	{action_emergency_stop("Shutdown from menu")}
	{action_call_remote_method("shutdown_machine")}

[menu __main __octoprint]
type = disabled

[menu __main __setup __calib __delta_calib_auto]
type = disabled

[menu __main __setup __calib __delta_calib_man]
type = disabled

[gcode_macro G32]
gcode = 
	SAVE_GCODE_STATE NAME=STATE_G32
	BED_MESH_CLEAR
	G90
	CG28
	Z_TILT_ADJUST
	PARKBED
	RESTORE_GCODE_STATE NAME=STATE_G32

[gcode_macro CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro XYCG28]
gcode = 
	{% if "xy" not in printer.toolhead.homed_axes %}
	G28 X Y
	{% endif %}

[gcode_macro ZCG28]
gcode = 
	{% if "z" not in printer.toolhead.homed_axes %}
	G28 Z
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	{% set s = params.S|float %}
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
	{% endif %}

[gcode_macro CALIBRATE_Z]
rename_existing = _BASE_CALIBRATE_Z
description = Perform the Z calibration using the physical Z endstop and the Klicky
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set mesh_ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% set mesh_center = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_center %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if V %}
	{ action_respond_info("Z Offset calibration") }
	{% endif %}
	M117 Z-Calibration..
	ATTACH_PROBE
	G1 X125 Y125 F8000
	{% if mesh_ready %}
	RESPOND MSG="Z calibration: a mesh is computed and ready, probing mesh center: {mesh_center}"
	_BASE_CALIBRATE_Z BED_POSITION={mesh_center}
	{% else %}
	RESPOND MSG="Z calibration: no mesh computed, probing default point"
	_BASE_CALIBRATE_Z
	{% endif %}
	DOCK_PROBE

[respond]

[gcode_macro SHUTDOWN]
gcode = 
	LCDRGB R=0 G=0 B=0                               ; Turn off LCD neopixels (see above for this macro)
	COOLDOWN                                              ; Shortcut to turn everything off (see above for this macro)
	{action_respond_info('action:poweroff')}          ; OctoPrint compatible host shutdown
	{action_call_remote_method("shutdown_machine")}   ; Moonraker compatible host shutdown

[gcode_macro REBOOT]
gcode = 
	{action_call_remote_method("reboot_machine")}

[gcode_macro _bot_data]
variable_lapse_video_size = 0
variable_lapse_filename = 'None'
variable_lapse_path = 'None'
gcode = 
	M118 Setting bot lapse variables

[gcode_shell_command backup_cfg]
command = sh /home/pi/klipper_config/scripts/myshellscript.sh
timeout = 30.
verbose = True

[gcode_macro BACKUP_CFG]
gcode = 
	RUN_SHELL_COMMAND CMD=backup_cfg

[gcode_macro COOLDOWN]
description = Shuts down the printer
gcode = 
	M84
	TURN_OFF_HEATERS
	M117
	LIGHT_OFF

[gcode_macro RESETSPEEDS]
gcode = 
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity}
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={printer.configfile.settings.printer.square_corner_velocity}

[gcode_macro BEEP]
gcode = 
	{% set i = params.I|default(1)|int %}           ; Iterations (number of times to beep).
	{% set dur = params.DUR|default(100)|int %}     ; Duration/wait of each beep in ms. Default 100ms.
	{% set freq = params.FREQ|default(2000)|int %}  ; Frequency in Hz. Default 2kHz.
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[delayed_gcode _CLEAR_DISPLAY]
gcode = 
	M117

[delayed_gcode _DELAY_SDCARD_RESET_FILE]
gcode = 
	SDCARD_RESET_FILE

[gcode_macro DIRECT_MOVE]
gcode = 
	{% set out_param = ["G0"] %}
	{% set _dummy = out_param.append("X%s" % params.X) if params.X %}
	{% set _dummy = out_param.append("Y%s" % params.Y) if params.Y %}
	{% set _dummy = out_param.append("Z%s" % params.Z) if params.Z %}
	{% set _dummy = out_param.append("E%s" % params.E) if params.E %}
	{% set _dummy = out_param.append("F%s" % params.F) if params.F %}
	{out_param|join(" ")}

[gcode_macro _PRINT_AR]
description = Helper: Action response
gcode = 
	{% if params.SHOW_LCD|default('false') == 'true' %} M117 {params.T} {% endif %}
	{action_respond_info(params.T)}

[gcode_macro M115]
description = Print host and mcu version
rename_existing = M115.1
gcode = 
	{% set out = ['mcu build version:'] %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% if name2 is in ['mcu_version'] %}
	{% set _dummy = out.append("%s: %s" % (name1, printer[name1][name2])) %}
	{% endif %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(out|join("\n"))}
	M115.1

[gcode_shell_command plot_graph]
command = bash /home/pi/klipper_config/scripts/plot_graphs.sh
timeout = 300.0
verbose = True

[gcode_macro bedfanvars]
variable_threshold = 100
variable_fast = 0.4
variable_slow = 0.3
gcode = 

[fan_generic BedFans]
pin = PD14
kick_start_time = 0.5

[gcode_macro BedFansSlow]
gcode = 
	{% set SLOW = printer["gcode_macro bedfanvars"].slow|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={SLOW}

[gcode_macro BedFansFast]
gcode = 
	{% set FAST = printer["gcode_macro bedfanvars"].fast|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={FAST}

[gcode_macro BedFansOff]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro SET_HEATER_TEMPERATURE]
rename_existing = _SET_HEATER_TEMPERATURE
gcode = 
	{% set HEATER = params.HEATER|default("None") %}
	{% set TARGET = params.TARGET|default(0)|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if HEATER|lower == "extruder" %}
	M104 S{TARGET}
	{% elif HEATER|lower == "heater_bed" %}
	M99140 S{TARGET}
	{% else %}
	{action_respond_info("Heater %s not supported" % HEATER)}
	{% endif %}
	{% if HEATER|lower == "heater_bed" %}
	{% if TARGET >= THRESHOLD %}
	BedFansSlow
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=1
	{% else %}
	BedFansOff
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=0
	{% endif %}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	{% set S = params.S|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if S >= THRESHOLD %}
	BedFansSlow
	{% else %}
	BedFansOff
	{% endif %}
	M140 {% for p in params
	%}{'%s%s' % (p, params[p])}{%
	endfor %}
	{% if S != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={S|int} MAXIMUM={S|int + 5}
	{% endif %}
	{% if S >= THRESHOLD %}
	BedFansFast
	{% endif %}

[gcode_macro M140]
rename_existing = M99140
gcode = 
	{% set S = params.S|float %}
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={S}

[gcode_macro TURN_OFF_HEATERS]
rename_existing = _TURN_OFF_HEATERS
gcode = 
	BedFansOff
	_TURN_OFF_HEATERS

[delayed_gcode bedfanloop]
gcode = 
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if printer.heater_bed.target >= THRESHOLD %}
	{% if printer.heater_bed.temperature|int >= (printer.heater_bed.target|int - 1) %}
	BedFansFast
	{% else %}
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=5
	{% endif %}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_sensor chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VT.430 " }
	~voron~
	{% endif %}

[z_calibration]
nozzle_xy_position = 143,256
switch_xy_position = 136,235
bed_xy_position = 125,125
switch_offset = .52
max_deviation = 1.0
speed = 200
probing_first_fast = true
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_probe

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 300
variable_move_accel = 10000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 257
variable_max_bed_x = 250
variable_z_endstop_x = 143
variable_z_endstop_y = 256
variable_docklocation_x = 181
variable_docklocation_y = 251
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 1000
variable_dockmove_x = 40
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 30
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff = 10
variable_override_homing = ''
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff = printer["gcode_macro _User_Variables"].home_backoff|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION X=0 Y=0 Z=0
	_KlickyDebug msg="homing_override toolhead too low, raising it by {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X G28 X0"
	G28 X0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% else %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro Z_TILT_ADJUST]
rename_existing = _Z_TILT_ADJUST
description = 
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Z Tilt Adjust") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_Z_TILT_ADJUST {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe
	G28 Z0

[gcode_macro HEATSOAK_CHAMBER]
description = Heatsoak chamber to a specific temperature with a timeout
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set MAXTIME = params.MAXTIME|default(15)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% for _ in range(1, MAXTIME) %}
	_WAIT_CHAMBER_TEMP TEMP={SETPOINT_TEMP}
	{% endfor %}
	{% if V %}
	RESPOND MSG="Chamber temperature OK !"
	{% endif %}

[gcode_macro _WAIT_CHAMBER_TEMP]
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set CURRENT_TEMP = printer["temperature_sensor chamber"].temperature|float %}
	{% if CURRENT_TEMP <= SETPOINT_TEMP %}
	RESPOND MSG="Heating up the chamber : {CURRENT_TEMP}/{SETPOINT_TEMP}"
	G4 P{60000 * 1}
	{% endif %}

[gcode_macro HEATSOAK_BED]
description = Heatsoak bed at specified temperature and wait for a specific amount of time
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|int %}
	{% set TIME = params.SOAKTIME|default(8)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	RESPOND MSG="Heating up bed..."
	{% endif %}
	M190 S{SETPOINT_TEMP}
	{% if TIME > 0 %}
	{% for _ in range(1, TIME) %}
	RESPOND MSG="Heatsoak..."
	G4 P{60000 * 1}
	{% endfor %}
	{% else %}
	RESPOND MSG="No heatsoak needed, continue"
	{% endif %}
	{% if V %}
	RESPOND MSG="Bed temperature OK"
	{% endif %}

[heater_fan hotend_fan]
pin = PA8
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[fan]
pin = PE5
kick_start_time = 0.5
off_below = 0.10

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed
max_power = 0.4

[fan_generic exhaust_fan]
pin = PD13
kick_start_time = 5.0

[gcode_macro _LOW_TEMP_CHECK]
description = Check the nozzle is at temperature and heat it if needed
gcode = 
	{% set T = params.T|default(230)|float %}
	{% if printer.extruder.target != 0 %}
	{% if printer.extruder.temperature < printer.extruder.target %}
	M109 S{printer.extruder.target|float}
	{% endif %}
	{% else %}
	{% if printer.extruder.target < T %}
	M109 S{T}
	{% endif %}
	{% endif %}

[gcode_macro CHANGE_FILAMENT]
description = Do a PAUSE, park the toolhead over the purge bucket and unload the filament
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=CHANGE_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	PAUSE
	PARKFRONTLOW
	TIP_SHAPING
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=CHANGE_FILAMENT_state

[gcode_macro UNLOAD_FILAMENT]
description = Basic unload of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=UNLOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G1 E-20 F3600
	G4 P3000
	G1 E{DISTANCE|float * -1} F3000
	RESTORE_GCODE_STATE NAME=UNLOAD_FILAMENT_state

[gcode_macro LOAD_FILAMENT]
description = Basic load of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=LOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G92 E0
	G1 E{DISTANCE|float} F200
	G1 E50 F150
	G92 E0
	RESTORE_GCODE_STATE NAME=LOAD_FILAMENT_state

[gcode_macro TIP_SHAPING]
description = Filament tip shaping sequence
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=TIP_SHAPING_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M82
	G92 E0
	G1 E2 F3600
	G1 E0 F3600
	G1 E3 F3600
	G1 E0 F3600
	G1 E4 F3600
	G1 E0 F3600
	RESTORE_GCODE_STATE NAME=TIP_SHAPING_state

[gcode_macro PRINT_START]
description = Machine heatup procedure before starting a print
gcode = 
	{% set BED_TEMP = params.BED|int %}
	{% set EXTRUDER_TEMP = params.HOTEND|int %}
	{% set SOAK = params.SOAK|default(0)|int %}
	{% set CHAMBER_TEMP = params.CHAMBER|default(0)|int %}
	{% set CHAMBER_MAXTIME = params.CHAMBER_MAXTIME|default(20)|int %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	{% set FL_SIZE = params.SIZE|default("0_0_0_0")|string %}
	_User_Variables
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	CLEAR_PAUSE
	BED_MESH_CLEAR
	G90
	M83
	LIGHT_ON
	M117 Homing                 ; display message
	status_homing
	G28
	PARKBED
	M117 Bed Soak
	status_heating
	{% if (SOAK > 0) and (printer.heater_bed.target < (BED_TEMP - 8)) %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME={SOAK}
	{% else %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME=0
	{% endif %}
	M117 Chamber Soak
	status_heating
	{% if CHAMBER_TEMP > 0 %}
	M109 S{EXTRUDER_TEMP - 50}
	HEATSOAK_CHAMBER TEMP={CHAMBER_TEMP} MAXTIME={CHAMBER_MAXTIME}
	{% endif %}
	M117 Extruder heating
	status_heating
	{% if V %}
	RESPOND MSG="Extruder temperature OK"
	{% endif %}
	G1 X15 Y250 Z20 F6000
	M109 S{EXTRUDER_TEMP}
	G4 P{60000 * 0.5}
	CLEAN_NOZZLE
	M117 Tilt..
	status_leveling
	{% if V %}
	RESPOND MSG="TILT..."
	{% endif %}
	Z_TILT_ADJUST
	M117 Nozzle cleaning
	status_cleaning
	CLEAN_NOZZLE
	CLEAN_NOZZLE
	{% if V %}
	RESPOND MSG="Auto Z calibration..."
	{% endif %}
	M117 Auto Z Cal
	status_calibrating_z
	ATTACH_PROBE_LOCK
	COMPUTE_MESH_PARAMETERS SIZE={FL_SIZE}
	CALIBRATE_Z
	M117 Adaptive Bed Mesh
	{% if V %}
	RESPOND MSG="Bed mesh measurement..."
	{% endif %}
	status_meshing
	ADAPTIVE_BED_MESH SIZE={FL_SIZE}
	DOCK_PROBE_UNLOCK
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "PLA" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "PETG" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.0750
	SET_GCODE_OFFSET Z_ADJUST=0.010 MOVE=1
	{% elif MATERIAL == "ABS" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "FLEX" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "PC" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "NYLON" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% endif %}
	M117 Printing...
	status_printing
	{% if V %}
	RESPOND MSG="Start printing !"
	{% endif %}
	G92 E0;
	G90
	G0 X5 Y5 F6000
	G0 Z0.4
	G91
	G1 X120 E30 F600;
	G1 Y1
	G1 X-120 E30 F600;
	G92 E0;
	G90
	G1 Z2.0 E-0.2 F600 ;move the platform down 15mm
	G92 E0 ;zero the extruded length again
	G1 Z5 F600
	G92 E0
	LIGHT_ON S=25
	status_printing
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1

[gcode_macro PRINT_END]
gcode = 
	{% set FILTER_TIME = params.FILTER_TIME|default(600)|int %}
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	M117 Done!
	status_ready
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	{% if printer.extruder.temperature > 120 %}
	G92 E0                         ; zero the extruder
	G1 E-12.0 F1800                 ; retract filament
	{% endif %}
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	M84
	BED_MESH_CLEAR
	RESETSPEEDS
	LIGHT_OFF
	_SD_PRINT_STATS
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "ABS" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "PC" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "NYLON" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% endif %}
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[delayed_gcode _STOP_FILTER]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro _ADAPTIVE_MESH_VARIABLES]
variable_ready = False
variable_do_mesh = False
variable_do_nominal = False
variable_mesh_min = 0,0
variable_mesh_max = 0,0
variable_mesh_center = 0,0
variable_probe_count = 0,0
variable_rri = 0
variable_algo = "bicubic"
gcode = 

[gcode_macro COMPUTE_MESH_PARAMETERS]
description = Compute the mesh parameters and store them for later use
gcode = 
	{% set xMinConf, yMinConf = printer["configfile"].config["bed_mesh"]["mesh_min"].split(',')|map('trim')|map('int') %}
	{% set xMaxConf, yMaxConf = printer["configfile"].config["bed_mesh"]["mesh_max"].split(',')|map('trim')|map('int') %}
	{% set xProbeCntConf, yProbeCntConf = printer["configfile"].config["bed_mesh"]["probe_count"].split(',')|map('trim')|map('int') %}
	{% set algo = printer["configfile"].config["bed_mesh"]["algorithm"]|lower %}
	{% set xMeshPPS, yMeshPPS = printer["configfile"].config["bed_mesh"]["mesh_pps"].split(',')|map('trim')|map('int') %}
	{% if params.SIZE is defined and params.SIZE != "0_0_0_0" %}
	{% set xMinSpec, yMinSpec, xMaxSpec, yMaxSpec = params.SIZE.split('_')|map('trim')|map('int') %}
	{% set margin = params.MARGIN|default(5)|int %}
	{% set xMin = [xMinConf, (xMinSpec - margin)]|max %}
	{% set xMax = [xMaxConf, (xMaxSpec + margin)]|min %}
	{% set yMin = [yMinConf, (yMinSpec - margin)]|max %}
	{% set yMax = [yMaxConf, (yMaxSpec + margin)]|min %}
	{% set xProbeCnt = ((xMax - xMin) * xProbeCntConf / (xMaxConf - xMinConf))|round(0, 'ceil')|int %}
	{% set yProbeCnt = ((yMax - yMin) * yProbeCntConf / (yMaxConf - yMinConf))|round(0, 'ceil')|int %}
	{% if xProbeCnt < 3 and yProbeCnt < 3 %}
	RESPOND MSG="Computed mesh parameters: none, bed mesh not needed"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={False}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% else %}
	{% set xProbeCnt = [3, xProbeCnt]|max %}
	{% set yProbeCnt = [3, yProbeCnt]|max %}
	{% if xProbeCnt % 2 == 0 %}
	{% set xProbeCnt = xProbeCnt + 1 %}
	{% endif %}
	{% if yProbeCnt % 2 == 0 %}
	{% set yProbeCnt = yProbeCnt + 1 %}
	{% endif %}
	{% if xMeshPPS != 0 or yMeshPPS != 0 %}
	{% set probeCntMin = [xProbeCnt, yProbeCnt]|min %}
	{% set probeCntMax = [xProbeCnt, yProbeCnt]|max %}
	{% if algo == "lagrange" and probeCntMax > 6 %}
	{% set algo = "bicubic" %}
	{% endif %}
	{% if algo == "bicubic" and probeCntMin < 4 %}
	{% if probeCntMax > 6 %}
	{% if xProbeCnt > yProbeCnt %}
	{% set yProbeCnt = 5 %}
	{% else %}
	{% set xProbeCnt = 5 %}
	{% endif %}
	{% else %}
	{% set algo = "lagrange" %}
	{% endif %}
	{% endif %}
	{% endif %}
	{% set rRefIndex = (((xProbeCnt * yProbeCnt) - 1) / 2)|int %}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_min = "%d,%d"|format(xMin, yMin) %}
	{% set mesh_max = "%d,%d"|format(xMax, yMax) %}
	{% set probe_count = "%d,%d"|format(xProbeCnt, yProbeCnt) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	RESPOND MSG="Computed mesh parameters: MESH_MIN={mesh_min} MESH_MAX={mesh_max} MESH_CENTER={mesh_center} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={False}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_min VALUE='"{mesh_min}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_max VALUE='"{mesh_max}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=probe_count VALUE='"{probe_count}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=rri VALUE={rRefIndex}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=algo VALUE='"{algo}"'
	{% endif %}
	{% else %}
	RESPOND MSG="Computed mesh parameters: none, going for a nominal bed mesh"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={True}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={True}

[gcode_macro ADAPTIVE_BED_MESH]
description = Perform a bed mesh, but only where and when it's needed
gcode = 
	{% set ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if ready %}
	_DO_ADAPTIVE_MESH
	{% else %}
	RESPOND MSG="Adaptive bed mesh: parameters not computed, automatically calling the COMPUTE_MESH_PARAMETERS macro prior to the mesh"
	COMPUTE_MESH_PARAMETERS {rawparams}
	M400
	_DO_ADAPTIVE_MESH
	{% endif %}

[gcode_macro _DO_ADAPTIVE_MESH]
gcode = 
	{% set do_mesh = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_mesh %}
	{% set do_nominal = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_nominal %}
	{% set mesh_min = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_min %}
	{% set mesh_max = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_max %}
	{% set probe_count = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].probe_count %}
	{% set rRefIndex = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].rri %}
	{% set algo = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].algo %}
	{% if do_mesh %}
	{% if do_nominal %}
	RESPOND MSG="Adaptive bed mesh: nominal bed mesh"
	BED_MESH_CALIBRATE
	{% else %}
	RESPOND MSG="Adaptive bed mesh: MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	BED_MESH_CALIBRATE MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}
	{% endif %}
	{% else %}
	RESPOND MSG="Adaptive bed mesh: no mesh to be done"
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={False}

[gcode_macro SEARCH_VARS]
description = Search for variables in the "printer" object from Klipper
gcode = 
	{% set search = params.S|lower %}
	{% set ns = namespace() %}
	{% for item in printer  %}
	{% if ' ' in item %}
	{% set ns.path = ['printer', "['%s']" % (item), ''] %}
	{% else %}
	{% set ns.path = ['printer.', item, ''] %}
	{% endif %}
	{% if search in ns.path|lower %}
	{ action_respond_info(ns.path|join) }
	{% endif %}
	{% if printer[item].items() %}
	{% for childkey, child in printer[item].items() recursive %}
	{% set ns.path = ns.path[:loop.depth|int + 1] %}
	{% if ' ' in childkey %}
	{% set null = ns.path.append("['%s']" % (childkey)) %}
	{% else %}
	{% set null = ns.path.append(".%s" % (childkey)) %}
	{% endif %}
	{% if child is mapping  %}
	{ loop(child.items()) }
	{% else %}
	{% if search in ns.path|lower %}
	{ action_respond_info("%s : %s" % (ns.path|join, child)) }
	{% endif %}
	{% endif %}
	{% endfor %}
	{% endif %}
	{% endfor %}

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	{% set TYPE = params.TYPE|default("")|string %}
	{% set BED_TEMP = params.BED_TEMP|default(110)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(240)|float %}
	{% set MATERIAL = params.MATERIAL|default("ABS")|string %}
	{% if TYPE=="" %}
	{action_respond_info("Please call this macro using TYPE= \"flow\" or \"pressure_advance\"")}
	{action_raise_error("not enough parameters to start a calibration!")}
	{% elif TYPE=="flow" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=130_130_170_170
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	{% elif TYPE=="pressure_advance" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=90_90_210_210
	PRESSURE_ADVANCE_CALIBRATION
	{% endif %}
	END_PRINT FILTER_TIME=0

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(0.93)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	M221 S{e_multiplier * 100}
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	G90
	M106 S{fan_speed * 255 / 100}
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	{% for perim_num in range(number_of_perimeters) %}
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	{% set do_raft = params.RAFT|default(1)|int %}
	{% set print_size      = params.SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	{% set fast_line_ratio_percent = 50 %}
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band - spacing_purge %}
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting Pressure Advance calibration print.")}
	{action_respond_info("")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button once the print starts exhibiting PA values that are obviously too high.")}
	{action_respond_info("")}
	{action_respond_info("PA of first band: %.4f" % pa_start)}
	{action_respond_info("PA of last band: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA increment per band: %.4f" % pa_increment)}
	{action_respond_info("Number of bands: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Inspect the printed model. "
	"Look at the top and bottom lines in each band, on the right side of the two vertical raft bars (where the print speeds change). "
	"Find the highest band from the bottom where the lines at its top still resemble the lines at its bottom, with no visible extrusion width irregularities. "
	"Your final Pressure Advance value would then be:"
	)}
	{action_respond_info("")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Update your [extruder] config section and set \"pressure_advance\" to the value you calculated.")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	{% for curr_band_num in range(1, num_bands + 1) %}
	{% set outer_loop = loop %}
	{% set curr_pa_value = pa_start + (curr_band_num - 1) * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro M486]
gcode = 
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[gcode_macro M701]
gcode = 
	LOAD_FILAMENT

[gcode_macro M702]
gcode = 
	UNLOAD_FILAMENT

[gcode_macro M125]
gcode = 
	PARK

[gcode_macro M900]
gcode = 
	{% set pa = params.K|float %}
	SET_PRESSURE_ADVANCE ADVANCE={pa}

[gcode_macro M204]
description = Set and limit acceleration to cfg value
rename_existing = M204.1
gcode = 
	{% set accel = params.S|float                      if 'S' in params and params.S|float > 0
	else [params.P|float,params.T|float]|min if 'P' in params and 'T' in params and
	params.P|float > 0 and params.T|float > 0 %}
	{% if accel is defined %}
	{% set lim_accel          = [accel,     printer.configfile.settings.printer.max_accel         ]|min %}
	{% set lim_accel_to_decel = [accel / 2, printer.configfile.settings.printer.max_accel_to_decel]|min %}
	SET_VELOCITY_LIMIT ACCEL={lim_accel} ACCEL_TO_DECEL={lim_accel_to_decel}
	{% else %}
	{action_respond_info("Invalid M204 command \"M204 %s\"" % rawparams)}
	{% endif %}

[gcode_macro M117]
rename_existing = M117.1
gcode = 
	{% if rawparams %}
	{% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
	SET_DISPLAY_TEXT MSG="{escaped_msg}"
	RESPOND TYPE=command MSG="{escaped_msg}"
	{% else %}
	SET_DISPLAY_TEXT
	{% endif %}

[sdcard_loop]

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[neopixel sb_leds]
pin = PB0
chain_count = 3
color_order = GRBW
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
initial_white = 0.0

[gcode_macro _sb_vars]
variable_colors = {
	'logo': {
	'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
	'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
	'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
	'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'printing': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	},
	'nozzle': {
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w':0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w':0.0},
	},
	'thermal': {
	'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
	}
	}
variable_logo_led_name = "sb_leds"
variable_logo_idx = "1"
variable_nozzle_led_name = "sb_leds"
variable_nozzle_idx = "2,3"
gcode = 

[gcode_macro _set_sb_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = params.LED|string %}
	{% set idx = (params.IDX|string).split(',') %}
	{% set transmit_last = params.TRANSMIT|default(1) %}
	{% for led_index in idx %}
	{% set transmit=transmit_last if loop.last else 0 %}
	set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
	{% endfor %}

[gcode_macro _set_sb_leds_by_name]
gcode = 
	{% set leds_name = params.LEDS %}
	{% set color_name = params.COLOR %}
	{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
	{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
	{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
	{% set transmit = params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}

[gcode_macro _set_logo_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro _set_nozzle_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro set_logo_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}

[gcode_macro set_nozzle_leds_on]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}

[gcode_macro set_nozzle_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}

[gcode_macro status_off]
gcode = 
	set_logo_leds_off transmit=0
	set_nozzle_leds_off

[gcode_macro status_ready]
gcode = 
	_set_sb_leds_by_name leds="logo" color="standby" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1

[gcode_macro status_busy]
gcode = 
	_set_sb_leds_by_name leds="logo" color="busy" transmit=0
	set_nozzle_leds_on

[gcode_macro status_heating]
gcode = 
	_set_sb_leds_by_name leds="logo" color="heating" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1

[gcode_macro status_leveling]
gcode = 
	_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
	set_nozzle_leds_on

[gcode_macro status_homing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="homing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_cleaning]
gcode = 
	_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
	set_nozzle_leds_on

[gcode_macro status_meshing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_calibrating_z]
gcode = 
	_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
	set_nozzle_leds_on

[gcode_macro status_printing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="printing" transmit=0
	set_nozzle_leds_on

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[filament_motion_sensor filament_sensor]
detection_length = 14.00
extruder = extruder
switch_pin = ^PG12
pause_on_runout = True
event_delay = 3.0
pause_delay = 0.5
insert_gcode = 
	M117 Insert Detected
runout_gcode = 
	M117 Runout Detected
	LCDRGB R=1 G=0 B=0
	BEEP I=12

[gcode_macro M600]
gcode = 
	LCDRGB R=0 G=1 B=0  ; Turn LCD green
	PAUSE                ; Pause

[pause_resume]

[display_status]

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set z = params.Z|default(10)|int %}                                                   ; z hop amount
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}                              ; set z hop variable for reference in resume macro
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}    ; set hotend temp variable for reference in resume macro
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0                                  ; disable filament sensor
	SAVE_GCODE_STATE NAME=PAUSE                                                          ; save current print position for resume
	BASE_PAUSE                                                                           ; pause print
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}       ; check that zhop doesn't exceed z max
	G91                                                                              ; relative positioning
	G1 Z{z} F900                                                                     ; raise Z up by z hop amount
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }                  ; if z max is exceeded, show message and set zhop value for resume to 0
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90                                                                                  ; absolute positioning
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000   ; park toolhead at front center
	SAVE_GCODE_STATE NAME=PAUSEPARK                                                      ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
	M104 S0                                                                              ; turn off hotend
	SET_IDLE_TIMEOUT TIMEOUT=43200                                                       ; set timeout to 12 hours
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	{% set e = params.E|default(2.5)|int %}
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1                          ; enable filament sensor
	RESETRGB                                                                    ; reset LCD color
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}  ; set timeout back to configured value
	{% if etemp > 0 %}
	M109 S{etemp|int}                                                        ; wait for hotend to heat back up
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100                     ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
	G91                                                                          ; relative positioning
	M83                                                                          ; relative extruder positioning
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900                                                ; prime nozzle by E, lower Z back down
	{% else %}
	G1 Z{zhop * -1} F900                                                     ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60                          ; restore position
	BASE_RESUME                                                                  ; resume print
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT
	RESETSPEEDS

[gcode_macro RESONANCES_TEST]
description = Run input shaper test
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	_CG28
	TURN_OFF_HEATERS
	M107
	{% if user.hw.chamber.fan %} M141 {% endif %}
	{% if user.hw.filter.ena %} _SET_FILTER {% endif %}
	_PRINT_AR T="INPUT SHAPER: Noise values, check if sensor is installed"
	MEASURE_AXES_NOISE
	_PRINT_AR T="INPUT SHAPER: Resonance Tests starting ..."
	TEST_RESONANCES AXIS=X
	TEST_RESONANCES AXIS=Y
	_PRINT_AR T="INPUT SHAPER: Resonance Tests done"
	_PRINT_AR T="INPUT SHAPER: Generate graph in backround"
	RUN_SHELL_COMMAND CMD=plot_graph

[gcode_macro DUMP_PARAMETERS]
description = Dump all Klipper parameters to terminal, helps find names and values of variables for use in macros
gcode = 
	{% set parameters = namespace(output = '') %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% set donotwant = ['bed_mesh','configfile'] %}
	{% if name1 is not in donotwant %}
	{% set param = "printer['%s'].%s = %s" % (name1, name2, printer[name1][name2]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endif %}
	{% else %}
	{% set param = "printer['%s'] = %s" % (name1, printer[name1]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(parameters.output)}

[gcode_macro TEST_SPEED]
gcode = 
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	{% set iterations = params.ITERATIONS|default(5)|int %}
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	{% set bound = params.BOUND|default(20)|int %}
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	SAVE_GCODE_STATE NAME=TEST_SPEED
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	G28
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	{% for i in range(iterations) %}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	G28
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro FEED_RATE_TEST]
gcode = 
	{% if printer.configfile.config.respond is not defined %}
	{action_raise_error("This gcode_macro requires the [respond] section in your printer.cfg")}
	{% endif %}
	{% set ns_test_steps = namespace(collector="", arr=[]) %}
	{% for char in params.TEST_STEPS|default("x_test,y_test,rect_test,diag_test")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% set ns_test_steps.arr = ns_test_steps.arr + [ns_test_steps.collector|string] %}
	{% set ns_test_steps.collector = "" %}
	{% else %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_speed_steps = namespace(collector="", arr=[]) %}
	{% for char in params.SPEED_STEPS|default("80.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% set ns_speed_steps.arr = ns_speed_steps.arr + [ns_speed_steps.collector|float] %}
	{% set ns_speed_steps.collector = "" %}
	{% else %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_distance_steps = namespace(collector="", arr=[]) %}
	{% for char in params.DISTANCE_STEPS|default("40.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% set ns_distance_steps.arr = ns_distance_steps.arr + [ns_distance_steps.collector|float] %}
	{% set ns_distance_steps.collector = "" %}
	{% else %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_accel_steps = namespace(collector="", arr=[]) %}
	{% for char in params.ACCEL_STEPS|default(printer.toolhead.max_accel|string)|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% set ns_accel_steps.arr = ns_accel_steps.arr + [ns_accel_steps.collector|int] %}
	{% set ns_accel_steps.collector = "" %}
	{% else %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set center_x_position = printer.toolhead.axis_maximum.x / 2 %}
	{% set center_y_position = printer.toolhead.axis_maximum.y / 2 %}
	{% set accel_steps = ns_accel_steps.arr %}
	{% set test_steps = ns_test_steps.arr %}
	{% set distance_steps = ns_distance_steps.arr %}
	{% set speed_steps = ns_speed_steps.arr %}
	SAVE_GCODE_STATE NAME=speed_testing_macro
	{% set testRunCounter = namespace(value=0) %}
	RESPOND PREFIX="Speed-Test - " MSG="Starting Speed testing with"
	RESPOND PREFIX="- " MSG="distance_steps={distance_steps}"
	RESPOND PREFIX="- " MSG="speed_steps={speed_steps}"
	RESPOND PREFIX="- " MSG="accel_steps={accel_steps}"
	RESPOND PREFIX="- " MSG="test_steps={test_steps}"
	RESPOND PREFIX="" MSG="--------------------"
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	G90
	G1 X{center_x_position} Y{center_y_position} Z25 F4000
	{% for distance_step in distance_steps %}
	{% for speed_step in speed_steps %}
	{% set speed_feedrate_step = speed_step * 60 %}
	{% for accel_step in accel_steps %}
	{% set testRunCounter.value = testRunCounter.value + 1 %}
	M204 S{accel_step}
	RESPOND PREFIX="Speed-Test - " MSG="Test-Run {testRunCounter.value} => distance: {distance_step} speed: {speed_step} acceleration: {accel_step}"
	{% for test_step in test_steps %}
	_{test_step|upper} FEEDRATE={speed_feedrate_step} DISTANCE={distance_step}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	RESTORE_GCODE_STATE NAME=speed_testing_macro

[gcode_macro _X_TEST]
description = Moves the head left/right
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _Y_TEST]
description = Moves the head forward/backward
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 y{distance} F{speed_feedrate}
	G1 y-{distance * 2} F{speed_feedrate}
	G1 y{distance} F{speed_feedrate}
	G90

[gcode_macro _RECT_TEST]
description = Moves the head in a rectangle
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x-{distance} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance * 2} F{speed_feedrate}
	G1 y{distance * 2} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _DIAG_TEST]
description = Moves the head diagonally. First spinning the stepper_x, then the stepper_y. (CoreXY)
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x-{distance * 2} y-{distance * 2} F{speed_feedrate}
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G1 x-{distance * 2} y{distance * 2} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G90

[gcode_macro _CIRCLE_TEST]
description = Moves the head in a circle twice.
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	{% if printer.configfile.config.gcode_arcs is not defined %}
	{action_raise_error("The circle test requires the [gcode_arcs] section in your printer.cfg")}
	{% endif %}
	{% for count in range(2) %}
	G2 I{distance} J{distance} F{speed_feedrate}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKREAR
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	CG28                               ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKBED
	G90                                ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro TOGGLE_BEEPER]
description = Toggle the printer beeper on and off.
gcode = 
	{% set beeper_state = printer.save_variables.variables.beeper_state|lower %}
	{% if printer['gcode_macro _USER_VARIABLE'].debug == 1 %}
	{action_respond_info('==== TOGGLE_BEEPER ====')}
	{action_respond_info("beeper_state: %s" % (beeper_state))}
	{action_respond_info('===============')}
	{% endif %}
	{% if beeper_state == "off" %}
	{action_respond_info('beeper is off, turning it on')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"on"'
	{% else %}
	{action_respond_info('beeper is on= turning it off')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"off"'
	{% endif %}
	SONG_SINGLE_BEEP

[gcode_macro SONG_SINGLE_BEEP]
gcode = 
	M300 S830.61 P137

[output_pin beeper]
pin = PE8
pwm = True
value = 0
shutdown_value = 0
cycle_time = 0.001

[gcode_macro M300]
gcode = 
	{% set S = params.S|default(1000)|int %} ; S sets the tone frequency
	{% set P = params.P|default(100)|int %} ; P sets the tone duration
	{% set L = 0.5 %} ; L varies the PWM on time, close to 0 or 1 the tone gets a bit quieter. 0.5 is a symmetric waveform
	{% if S <= 0 %} ; dont divide through zero
	{% set F = 1 %}
	{% set L = 0 %}
	{% elif S >= 10000 %} ;max frequency set to 10kHz
	{% set F = 0 %}
	{% else %}
	{% set F = 1/S %} ;convert frequency to seconds
	{% endif %}
	SET_PIN PIN=beeper VALUE={L} CYCLE_TIME={F} ;Play tone
	G4 P{P} ;tone duration
	SET_PIN PIN=beeper VALUE=0

[gcode_macro SONG_THUNDERSTRUCK]
gcode = 
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166

[gcode_macro SONG_AFRICA]
gcode = 
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P450
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P450
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P300
	M300 S2637 P225
	M300 S2637 P300
	M300 S2489 P300
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P600
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P600
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P150
	M300 S2489 P150
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P450
	M300 S2637 P300
	M300 S2637 P300
	M300 S2489 P225
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P900
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200

[gcode_macro SONG_STARWARS_IMP]
gcode = 
	M300 S1174 P401
	M300 S1174 P401
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P803

[gcode_macro SONG_ALLIWANT]
gcode = 
	M300 S1046 P333
	M300 S1318 P333
	M300 S1567 P333
	M300 S987 P166
	M300 S0 P41
	M300 S2093 P333
	M300 S0 P83
	M300 S0 P41
	M300 S987 P333
	M300 S880 P166
	M300 S0 P41
	M300 S1567 P333
	M300 S0 P83
	M300 S0 P41
	M300 S2349 P333
	M300 S2093 P333
	M300 S2093 P333
	M300 S987 P333
	M300 S2093 P166
	M300 S0 P41
	M300 S987 P333
	M300 S0 P83
	M300 S0 P41
	M300 S880 P166
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S880 P333
	M300 S2093 P333
	M300 S2349 P333
	M300 S2637 P333
	M300 S2349 P166
	M300 S2093 P333
	M300 S880 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S3135 P166
	M300 S2093 P333
	M300 S0 P166
	M300 S2349 P333
	M300 S2349 P166
	M300 S2349 P333
	M300 S0 P166
	M300 S1760 P166
	M300 S3135 P666
	M300 S880 P500
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P500
	M300 S1318 P166
	M300 S0 P333
	M300 S0 P166
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P333
	M300 S0 P166
	M300 S1318 P166
	M300 S0 P333
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S0 P666
	M300 S1760 P333
	M300 S880 P166
	M300 S880 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S880 P333
	M300 S0 P166
	M300 S2349 P166
	M300 S0 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S0 P166
	M300 S1760 P500
	M300 S2093 P333
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P166
	M300 S0 P333
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S2093 P500
	M300 S1046 P166
	M300 S1046 P166
	M300 S1174 P166
	M300 S1318 P166
	M300 S1396 P333

[gcode_macro SONG_MACGYVER]
gcode = 
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S2217 P300
	M300 S0 P150
	M300 S2959 P150
	M300 S3322 P300
	M300 S0 P150
	M300 S0 P150
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S1864 P150
	M300 S1864 P150
	M300 S1864 P150
	M300 S3322 P150
	M300 S0 P150
	M300 S3520 P150
	M300 S0 P300
	M300 S0 P300
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S0 P300
	M300 S2959 P150
	M300 S1864 P300
	M300 S3322 P300
	M300 S0 P300

[gcode_macro SONG_TAKEONME]
gcode = 
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300
	M300 S932 P150
	M300 S1661 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300

[gcode_macro SONG_DUCKTOY]
gcode = 
	M300 S2217 P240
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120

[gcode_macro SONG_LOONEY]
gcode = 
	M300 S2093 P428
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S880 P642
	M300 S2093 P214
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2489 P214
	M300 S2637 P642
	M300 S2637 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S880 P214
	M300 S2093 P214
	M300 S1567 P214
	M300 S932 P214
	M300 S880 P214
	M300 S1396 P214

[gcode_macro SONG_RICE_COOKER_DONE]
gcode = 
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3951.07 P250
	M300 S3135.96 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3135.96 P500

[gcode_macro Song_Futurama1]
gcode = 
	M300 S0 P2105
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S2637 P263
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S1975 P526
	M300 S1975 P263
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2959 P263

[gcode_macro Song_Futurama2]
gcode = 
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S0 P267
	M300 S1318 P133
	M300 S1318 P133
	M300 S1318 P267
	M300 S1244 P267
	M300 S1174 P267
	M300 S1174 P267
	M300 S1108 P267
	M300 S1108 P267

[gcode_macro Song_Mario]
gcode = 
	M300 S1046 P150
	M300 S1318 P150
	M300 S1567 P150
	M300 S2093 P150
	M300 S2637 P150
	M300 S3135 P400
	M300 S2637 P400
	M300 S1046 P150
	M300 S1244 P150
	M300 S1661 P150
	M300 S2093 P150
	M300 S2489 P150
	M300 S3322 P400
	M300 S2489 P400
	M300 S1174 P150
	M300 S1396 P150
	M300 S932 P150
	M300 S2349 P150
	M300 S2793 P150
	M300 S1864 P150
	M300 S0 P400
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S4186 P900

[gcode_macro Song_Mario2]
gcode = 
	M300 P214 S659
	M300 P210 S659
	M300 P219 S0
	M300 P210 S659
	M300 P219 S0
	M300 P214 S523
	M300 P357 S659
	M300 P72 S0
	M300 P357 S784
	M300 P500 S0
	M300 P357 S392
	M300 P500 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S523
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S880
	M300 P150 S784
	M300 P150 S880
	M300 P147 S784
	M300 P153 S0
	M300 P150 S988
	M300 P825 S784
	M300 P675 S0
	M300 P2001 S131
	M300 P250 S330
	M300 P245 S330
	M300 P756 S0
	M300 P250 S330
	M300 P250 S330
	M300 P125 S330
	M300 P125 S330
	M300 P250 S349
	M300 P245 S349
	M300 P756 S0
	M300 P250 S349
	M300 P250 S349
	M300 P125 S349
	M300 P125 S349
	M300 P250 S392
	M300 P245 S392

[gcode_macro Song_Doom]
gcode = 
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P57 S82
	M300 P78 S0
	M300 P142 S82
	M300 P135 S123
	M300 P135 S131
	M300 P28 S82
	M300 P106 S0
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P114 S131
	M300 P28 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P674 S117
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S123
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P667 S117
	M300 P7 S82
	M300 P35 S82
	M300 P92 S0
	M300 P7 S82
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131
	M300 P128 S131
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S117
	M300 P128 S117
	M300 P7 S82
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S123
	M300 P135 S131
	M300 P7 S82
	M300 P21 S82
	M300 P106 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P128 S165
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P135 S82
	M300 P114 S131
	M300 P21 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P7 S117
	M300 P667 S117
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131

[gcode_macro Song_Simpsons]
gcode = 
	M300 P563 S523
	M300 P375 S659
	M300 P375 S740
	M300 P188 S880
	M300 P563 S784
	M300 P375 S659
	M300 P375 S523
	M300 P188 S440
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P750 S392
	M300 P375 S0
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P188 S392
	M300 P563 S466
	M300 P188 S523
	M300 P188 S523
	M300 P188 S523
	M300 P375 S523

[gcode_macro Song_Centerfold]
gcode = 
	M300 P539 S494
	M300 P386 S587
	M300 P143 S494
	M300 P266 S440
	M300 P261 S392
	M300 P511 S392
	M300 P268 S330
	M300 P261 S392
	M300 P420 S392
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P245 S392
	M300 P273 S440
	M300 P557 S494
	M300 P73 S0
	M300 P393 S587
	M300 P148 S494
	M300 P273 S440
	M300 P261 S392
	M300 P539 S392
	M300 P34 S0
	M300 P261 S330
	M300 P261 S392
	M300 P268 S392
	M300 P130 S330
	M300 P148 S392
	M300 P268 S440
	M300 P284 S392
	M300 P273 S392
	M300 P273 S440
	M300 P534 S494
	M300 P34 S0
	M300 P402 S587
	M300 P143 S494
	M300 P261 S440
	M300 P266 S392
	M300 P518 S392
	M300 P284 S330
	M300 P284 S392
	M300 P277 S392
	M300 P155 S330
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P280 S392
	M300 P300 S440
	M300 P507 S494
	M300 P414 S587
	M300 P136 S494
	M300 P291 S440
	M300 P255 S392
	M300 P541 S392
	M300 P277 S330
	M300 P291 S392
	M300 P273 S392
	M300 P141 S330
	M300 P155 S392
	M300 P273 S440
	M300 P250 S392
	M300 P273 S392
	M300 P266 S440
	M300 P280 S494
	M300 P250 S587
	M300 P545 S587
	M300 P261 S587
	M300 P164 S587
	M300 P575 S659

[gcode_macro Song_GanstaParadise]
gcode = 
	M300 P19 S1047
	M300 P539 S104
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P37 S523
	M300 P142 S98
	M300 P6 S87
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P167 S494
	M300 P19 S98
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P31 S523
	M300 P155 S87
	M300 P6 S1047
	M300 P551 S65
	M300 P186 S392
	M300 P198 S784
	M300 P359 S0
	M300 P186 S523
	M300 P12 S1047
	M300 P545 S104
	M300 P186 S523
	M300 P235 S1047
	M300 P322 S0
	M300 P56 S523
	M300 P130 S98
	M300 P25 S1047
	M300 P532 S87
	M300 P186 S523
	M300 P204 S1047
	M300 P353 S0
	M300 P186 S494
	M300 P12 S988
	M300 P545 S98
	M300 P186 S494
	M300 P173 S988
	M300 P384 S0
	M300 P50 S523
	M300 P118 S87
	M300 P19 S65
	M300 P155 S1047
	M300 P402 S0
	M300 P186 S392
	M300 P130 S784
	M300 P613 S0
	M300 P173 S1047
	M300 P384 S0
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P186 S523
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P186 S494
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P186 S523
	M300 P180 S1047
	M300 P378 S0
	M300 P186 S392

[gcode_macro Song_Naruto]
gcode = 
	M300 P311 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P35 S0
	M300 P150 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P92 S0
	M300 P309 S740
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P91 S0
	M300 P299 S587
	M300 P150 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P60 S220
	M300 P92 S0
	M300 P309 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P30 S0
	M300 P155 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P90 S0
	M300 P311 S880
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P84 S0
	M300 P302 S220
	M300 P155 S220
	M300 P60 S220
	M300 P87 S0
	M300 P60 S220
	M300 P91 S0
	M300 P60 S220
	M300 P90 S0
	M300 P82 S659
	M300 P229 S1047
	M300 P151 S196
	M300 P60 S196
	M300 P91 S0
	M300 P56 S196
	M300 P91 S0
	M300 P61 S196
	M300 P84 S0
	M300 P271 S1047
	M300 P30 S0
	M300 P155 S1175
	M300 P60 S196
	M300 P87 S0
	M300 P151 S1047
	M300 P60 S196
	M300 P90 S0
	M300 P311 S988
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P113 S880
	M300 P34 S0
	M300 P118 S784
	M300 P34 S0
	M300 P264 S740
	M300 P30 S0
	M300 P153 S784
	M300 P149 S82
	M300 P267 S880
	M300 P34 S0
	M300 P163 S988
	M300 P148 S82
	M300 P151 S82
	M300 P151 S98
	M300 P147 S92

[gcode_macro Song_StillAlive]
gcode = 
	M300 P511 S0
	M300 P247 S440
	M300 P250 S466
	M300 P265 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S659
	M300 P247 S587
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S523
	M300 P247 S523
	M300 P249 S262
	M300 P250 S523
	M300 P250 S262
	M300 P254 S440
	M300 P259 S466
	M300 P269 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S784
	M300 P247 S698
	M300 P247 S659
	M300 P250 S587
	M300 P265 S587
	M300 P248 S659
	M300 P247 S698
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S784
	M300 P250 S880
	M300 P265 S932
	M300 P248 S932
	M300 P247 S880
	M300 P249 S349
	M300 P249 S784
	M300 P247 S349
	M300 P247 S698
	M300 P250 S784
	M300 P265 S880
	M300 P248 S880
	M300 P247 S784
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S698
	M300 P247 S698
	M300 P249 S659
	M300 P249 S220
	M300 P247 S659
	M300 P247 S740
	M300 P250 S740
	M300 P513 S220
	M300 P247 S740
	M300 P249 S587
	M300 P249 S494
	M300 P247 S587
	M300 P247 S740
	M300 P250 S587
	M300 P265 S440

[gcode_macro Song_OnlineSong]
gcode = 
	M300 P699 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P1716 S415
	M300 P318 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P2097 S415

[gcode_macro _ADD_PRINT_TIME]
description = Helper: Store print time values in variables
gcode = 
	{% set time = printer.print_stats.total_duration %}
	{% set filament = printer.print_stats.filament_used|float %}
	{% set filtertime = time if printer['gcode_macro PRINT_START'].var.filter else 0 %}
	{% if not printer.save_variables.variables.print_stats %}
	{% set print_stats = {'time': {'total': time, 'service': time, 'filter': filtertime}, 'filament': filament}%}
	{% else %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'total':(print_stats.time.total + time)|int}) %}
	{% set _dummy = print_stats.time.update({'service':(print_stats.time.service + time)|int}) %}
	{% set _dummy = print_stats.time.update({'filter':(print_stats.time.filter + filtertime)|int}) %}
	{% set _dummy = print_stats.update({'filament':(print_stats.filament + filament)|float}) %}
	{% endif %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"

[gcode_macro _DISPLAY_PRINT_TIME]
description = Helper: Print actual stored print time
gcode = 
	{% set totaltime = params.SECONDS|int if 'SECONDS' in params|upper
	else printer.save_variables.variables.print_stats.time.total %}
	{% set prefix = params.PREFIX|default('Total') %}
	{% set h,m,s = (totaltime / 3600)|int, ((totaltime / 60) % 60)|int, (totaltime % 60)|int %}
	{action_respond_info("Print time %s %d:%02d:%02d" % (prefix,h,m,s))}
	M117 {prefix} {h}:{'%02d' % m}:{'%02d' % s}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10

[gcode_macro _SD_PRINT_STATS]
description = Helper: Print statistic of last print
gcode = 
	{% set PT = printer.print_stats.print_duration %}
	{% set Ph,Pm,Ps = (PT / 3600)|int, ((PT / 60) % 60)|int, (PT % 60)|int %}
	{% set TT = printer.print_stats.total_duration %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set Fil = printer.print_stats.filament_used|float / 1000.0 %}
	{action_respond_info("Statistic of last Print (%s):
	Name: %s
	Filament: %.4fm
	Print Time: %d:%02d:%02d
	Total Time: %d:%02d:%02d" %
	(params.R, printer.print_stats.filename, Fil, Ph, Pm, Ps, Th, Tm, Ts))}

[gcode_macro _SD_PRINTER_STATS]
description = Helper: Print statistic of printer
gcode = 
	{% set ST = printer.save_variables.variables.print_stats.time.service %}
	{% set Sh,Sm,Ss = (ST / 3600)|int, ((ST / 60) % 60)|int, (ST % 60)|int %}
	{% set TT = printer.save_variables.variables.print_stats.time.total %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set FT = printer.save_variables.variables.print_stats.time.filter %}
	{% set Fh,Fm,Fs = (FT / 3600)|int, ((FT / 60) % 60)|int, (FT % 60)|int %}
	{% set Fil = printer.save_variables.variables.print_stats.filament|float / 1000.0 %}
	{action_respond_info("Printer Statistics:
	Total Print Time: %d:%02d:%02d
	Total Filament used: %.4fm
	Filter use time: %d:%02d:%02d
	Time since last Service: %d:%02d:%02d" %
	(Th, Tm, Ts, Fil, Fh, Fm, Fs, Sh, Sm, Ss))}
	_CHECK_FILTER

[gcode_macro _CHECK_FILTER]
description = Helper: Print filter exchange warning
gcode = 
	{% if printer['gcode_macro _USER_VARIABLE'].hw.filter.ena and
	printer.save_variables.variables.print_stats %}
	{% set Fh = (printer.save_variables.variables.print_stats.time.filter / 3600)|int %}
	{% if Fh >= printer['gcode_macro _USER_VARIABLE'].peripheral.filter.warning %}
	M117 Change Filter!
	{action_respond_info("Change Filter material at Micro!")}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10
	{% endif %}
	{% endif %}

[gcode_macro RST_FILTER]
description = Reset Nevermore interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'filter': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Flter used time reseted to zero")}
	{% endif %}

[gcode_macro RST_SERVICE]
description = Reset Service interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'service': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Time since last service reseted to zero")}
	{% endif %}

[save_variables]
filename = /home/pi/klipper_config/.variables.stb

[delayed_gcode _INIT]
initial_duration = 1
gcode = 
	_USER_VARIABLE
	_CHECK_CONSITENT
	_EXECUTE_AT_INIT

[gcode_macro _EXECUTE_AT_INIT]
description = Helper: Everything that should run at klipper start
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% if printer.save_variables.variables.filament_sensor %} _RESTORE_FILAMENT_SENSOR {% endif %}
	{% if user.hw.filter.ena %} _CHECK_FILTER {% endif %}
	{% if user.hw.display.ena %} UPDATE_DELAYED_GCODE ID=_DISPLAY_INIT DURATION=2 {% endif %}
	_PRINT_AR T="Klipper INIT done"

[gcode_macro _CHECK_CONSITENT]
description = Helper: Check that some criterias are meet in the printer.cfg
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% set text = ["CONFIG: ERROR"] %}
	{% if user.run is not defined %}
	{% set _dummy = text.append("_USER_VARIABLE macro missing") %}
	{% elif not user.run %}
	{% set _dummy = text.append("_USER_VARIABLE macro not executed") %}
	{% endif %}
	{% if 'save_variables' not in printer %}
	{% set _dummy = text.append("[save_variables] missing") %}
	{% endif %}
	{% if 'virtual_sdcard' not in printer %}
	{% set _dummy = text.append("[virtual_sdcard] missing") %}
	{% endif %}
	{% if text|length > 1 %}
	{action_respond_info(text|join("\n"))}
	{% endif %}

[gcode_macro _USER_VARIABLE]
description = Helper: Contains User defined printer variables
variable_hw = {}
variable_homing = {}
variable_z_hop = 0
variable_speed = {}
variable_probe = {}
variable_park = {}
variable_filament = {}
variable_purge = {}
variable_print_start = {}
variable_unload_sd = False
variable_prime = {}
variable_respond = {}
variable_peripheral = {}
variable_run = False
gcode = 
	{% set user_z_endstop_xy = [143,256] %}
	{% set user_z_endstop_hop = 7.5 %}
	{% set user_z_home_current = 0.35 %}
	{% set user_home_accel = 1200 %}
	{% set user_bed_y_offset = 7 %}
	{% set user_z_hop_speed = 15 %}
	{% set user_retract_speed = 30 %}
	{% set user_travel_speed = 300 %}
	{% set user_probe_dock_speed = 50 %}
	{% set user_filament_load_speed = 50 %}
	{% set user_wipe_speed = 200 %}
	{% set user_prime_speed = 25 %}
	{% set user_probe_dock_pos = [181,251] %}
	{% set user_probe_delta_x = 30 %}
	{% set user_probe_delta_y = -30 %}
	{% set user_z_probe_hop = 15.5 %}
	{% set user_park_xy_delta = 25 %}
	{% set user_park_z_max_delta = 40 %}
	{% set user_park_z_min = 30 %}
	{% set user_park_pause_z_delta = 2.0 %}
	{% set user_park_at_cancel = true %}
	{% set user_extruder_min_add = 30 %}
	{% set user_load_distance = 90 %}
	{% set user_load_extrude = 50 %}
	{% set user_unload_distance = 75 %}
	{% set user_retract_end = 2 %}
	{% set user_retract_pause = 1 %}
	{% set user_brush_pos = 'left' %}
	{% set user_brush_x_middle = 52 %}
	{% set user_brush_x_width = 45 %}
	{% set user_brush_y_start = 256 %}
	{% set user_wipe_z = 0.5 %}
	{% set user_wipe_cnt = 5 %}
	{% set user_z_purge = 2.5 %}
	{% set user_print_start_bed_up = 10 %}
	{% set user_print_start_ival = 1 %}
	{% set user_print_start_extruder_time = 0.5 %}
	{% set user_print_start_bed_time = 0.5 %}
	{% set user_print_start_prime_mult = 2 %}
	{% set user_unload_sd = True %}
	{% set user_prime_start_xy = [5.0,30.0] %}
	{% set user_prime_z = 0.2 %}
	{% set user_prime_dir = 'Y+' %}
	{% set user_prime_spacing = 0.4 %}
	{% set user_prime_length = 220 %}
	{% set user_prime_seg = 11 %}
	{% set user_prime_extrude_per_seg = 2 %}
	{% set user_respond_set_z_current = 0 %}
	{% set user_respond_set_acc = 0 %}
	{% set user_respond_probe_action = 1 %}
	{% set user_respond_layer = 0 %}
	{% set user_filter_on = 0 %}
	{% set user_filter_use_time = 0 %}
	{% set user_vent_on = 0 %}
	{% set user_caselight_on = 0.2 %}
	{% set user_fan_run_after_print = 0 %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set cfg_endstop_z_offset = printer.configfile.settings.stepper_z.position_endstop|default(0.0)|float %}
	{% set hw_dic = {'display'       : {'ena' : True if 'neopixel neo_display' in printer.configfile.settings
	else False},
	'chamber'       : {'type': 'sensor' if 'temperature_sensor chamber' in printer.configfile.settings
	else 'fan'    if 'temperature_fan chamber' in printer.configfile.settings
	else 'none'},
	'caselight'     : {'ena' : True if 'output_pin caselight' in printer.configfile.settings
	else False},
	'filter'        : {'ena' : True if 'fan_generic filter' in printer.configfile.settings
	else False},
	'runout'        : {'type': 'switch' if 'filament_switch_sensor runout' in printer.configfile.settings
	else 'motion' if 'filament_motion_sensor runout' in printer.configfile.settings
	else 'file'   if 'save_variables' in printer and filament_loaded in printer.save_variables.variables
	else 'none'},
	'relay'         : {'ena' : True if 'output_pin extruder_relay' in printer.configfile.settings and
	'output_pin heater_bed_relay' in printer.configfile.settings
	else False},
	'auto_z_offset' : {'type': 'z_calib+flexplate' if 'z_calibration' in printer and 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'z_calib'           if 'z_calibration' in printer
	else 'flexplate'         if 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'none'},
	'mag_probe'     : {'ena' : True if printer['gcode_macro _MAG_PROBE'] is defined or 'dockable_probe' in printer
	else False},
	'endstop_temp'  : {'ena' : True if 'temperature_sensor endstop' in printer.configfile.settings
	else False}}%}
	{% set _dummy = hw_dic.chamber.update({'ena': True if hw_dic.chamber.type != 'none' else False}) %}
	{% set _dummy = hw_dic.chamber.update({'fan': True if hw_dic.chamber.type == 'fan' else False}) %}
	{% set _dummy = hw_dic.runout.update({'ena': True if hw_dic.runout.type != 'none' else False}) %}
	{% set _dummy = hw_dic.runout.update({'sensor': True if hw_dic.runout.type == 'switch' or hw_dic.runout.type == 'motion'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'ena': True if hw_dic.auto_z_offset.type != 'none' else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'auto': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'z_calib'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'manu': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'flexplate'
	else False}) %}
	{% set bed = {'min': {'x': min.x, 'y': min.y                    , 'z': 0    },
	'max': {'x': max.x, 'y': max.y - user_bed_y_offset, 'z': max.z}} %}
	{% set calc_center = {'x': (bed.max.x - bed.min.x) / 2,
	'y': (bed.max.y - bed.min.y) / 2,
	'z': (bed.max.z - bed.min.z) / 2} %}
	{% set calc_park = {'min': {'x': bed.min.x + user_park_xy_delta,
	'y': bed.min.y + user_park_xy_delta,
	'z': bed.min.z + user_park_z_min},
	'max': {'x': bed.max.x - user_park_xy_delta,
	'y': bed.max.y - user_park_xy_delta,
	'z': bed.max.z - user_park_z_max_delta}} %}
	{% set calc_z_endstop_z = cfg_endstop_z_offset|round(0, 'ceil') + 1.0 if cfg_endstop_z_offset > 0 else 1.0 %}
	{% set calc_z_hop = user_z_probe_hop if hw_dic.mag_probe.ena and user_z_probe_hop > user_z_endstop_hop
	else user_z_endstop_hop %}
	{% set calc_brush = {'start': user_brush_x_middle - user_brush_x_width / 2,
	'end'  : user_brush_x_middle + user_brush_x_width / 2} %}
	{% set calc_purge = {'x': (min.x + calc_brush.start) / 2 if user_brush_pos|lower == 'left'
	else max.x - (max.x - calc_brush.end) / 2,
	'y': max.y} %}
	{% set calc_wipe = {'start': {'x': calc_brush.start if user_brush_pos|lower == 'left'
	else calc_brush.end,
	'y': user_brush_y_start},
	'end'  : {'x': calc_brush.end if user_brush_pos|lower == 'left'
	else calc_brush.start,
	'y': max.y}} %}
	{% set homing_dic = {'z_endstop': {'x':user_z_endstop_xy[0], 'y':user_z_endstop_xy[1], 'z':calc_z_endstop_z, 'hop':user_z_endstop_hop},
	'z_current': user_z_home_current,
	'accel'    : user_home_accel} %}
	{% set purge_dic = {'purge' : {'x':calc_purge.x, 'y':calc_purge.y, 'z':user_z_purge},
	'wipe'  : {'start'  : {'x': calc_wipe.start.x, 'y': calc_wipe.start.y, 'z':user_wipe_z},
	'end'    : {'x': calc_wipe.end.x,   'y': calc_wipe.end.y,   'z':user_wipe_z},
	'offset' : (calc_wipe.end.y - calc_wipe.start.y) / user_wipe_cnt,
	'cnt'    : user_wipe_cnt}} %}
	{% set probe_dic = {'dock'        : {'x'    : user_probe_dock_pos[0],
	'y'    : user_probe_dock_pos[1] + user_probe_delta_y},
	'store'       : {'x'    : user_probe_dock_pos[0] + user_probe_delta_x,
	'y'    : user_probe_dock_pos[1]}} %}
	{% set speed_dic = {'z_hop'   : (user_z_hop_speed * 60),
	'retract' : (user_retract_speed * 60),
	'travel'  : (user_travel_speed * 60),
	'dock'    : (user_probe_dock_speed * 60),
	'load'    : (user_filament_load_speed * 60),
	'wipe'    : (user_wipe_speed * 60),
	'prime'   : (user_prime_speed * 60)} %}
	{% set park_dic = {'bed'           : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_park.min.z},
	'center'        : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_center.z},
	'front'         : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.max.z},
	'frontlow'      : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.min.z},
	'rear'          : {'x': calc_park.min.x, 'y': calc_park.max.y, 'z': calc_park.max.z},
	'pause'         : {'x': calc_purge.x,    'y': calc_purge.y,   'dz': user_park_pause_z_delta},
	'park_at_cancel': user_park_at_cancel} %}
	{% set filament_dic = {'load_distance'   : user_load_distance,
	'load_extrude'    : user_load_extrude,
	'unload_distance' : user_unload_distance,
	'retract'         : {'end'   : user_retract_end,
	'pause' : user_retract_pause,
	'cancel': user_retract_end - user_retract_pause}} %}
	{% set prime_dic = {'pos'             : {'x':user_prime_start_xy[0], 'y':user_prime_start_xy[1], 'z':user_prime_z},
	'dir'             : user_prime_dir,
	'spacing'         : user_prime_spacing,
	'length_per_seg'  : user_prime_length / user_prime_seg,
	'seg'             : user_prime_seg,
	'extrude_per_seg' : user_prime_extrude_per_seg} %}
	{% set print_start_dic = {'bed_up'     : user_print_start_bed_up|float|round(1),
	'ival'       : user_print_start_ival|int,
	'time'       : {'extruder' : (user_print_start_extruder_time * 60)|int,
	'bed'      : (user_print_start_bed_time * 60)|int},
	'prime_mult' : user_print_start_prime_mult|float} %}
	{% set respond_dic = {'z_current'    : user_respond_set_z_current,
	'acc'          : user_respond_set_acc,
	'probe_action' : user_respond_probe_action,
	'layer'        : user_respond_layer} %}
	{% set peripheral_dic =  {'filter'     : {'on_val'          : user_filter_on,
	'warning'         : user_filter_use_time,
	'run_after_print' : (user_fan_run_after_print * 60)},
	'vent'      : {'on_val'          : user_vent_on,
	'run_after_print' : ((user_fan_run_after_print * 60) + 5)},
	'caselight' : {'on_val' : user_caselight_on}} %}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=hw VALUE="{hw_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=homing VALUE="{homing_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=z_hop VALUE={calc_z_hop}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=speed VALUE="{speed_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=probe VALUE="{probe_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=park VALUE="{park_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=filament VALUE="{filament_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=purge VALUE="{purge_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=print_start VALUE="{print_start_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=unload_sd VALUE={user_unload_sd}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=prime VALUE="{prime_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=respond VALUE="{respond_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=peripheral VALUE="{peripheral_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=run VALUE=True

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	G90
	G1 X{mid_x - size / 2} Y{mid_y - size / 2} Z{z_height} F{feedrate_travel}
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G1 X{mid_x + size / 2} F{curr_speed}
	G1 Y{mid_y + size / 2} F{curr_speed}
	G1 X{mid_x - size / 2} F{curr_speed}
	G1 Y{mid_y - size / 2} F{curr_speed}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=VIBRATIONS
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[neopixel lcd]
pin = EXP1_6
chain_count = 3
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
color_order = RGB

[gcode_macro LCDRGB]
gcode = 
	{% set r = params.R|default(1)|float %}
	{% set g = params.G|default(1)|float %}
	{% set b = params.B|default(1)|float %}
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=3

[gcode_macro RESETRGB]
gcode = 
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=3

[delayed_gcode SETDISPLAYNEOPIXEL]
initial_duration = 1
gcode = 
	RESETRGB

[exclude_object]

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_2B001000105053424E363620-if00

[virtual_sdcard]
path = /home/pi/gcode_files

[gcode_arcs]
resolution = 0.1

[idle_timeout]
timeout = 2700

[printer]
kinematics = corexy
max_velocity = 500
max_accel = 10000
max_z_velocity = 15
max_z_accel = 50
square_corner_velocity = 8.0

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 70.8
shaper_type_y = mzv
shaper_freq_y = 58.2

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345]
cs_pin = rpi:None

[resonance_tester]
accel_chip = adxl345
probe_points = 
	125, 125, 5

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG6
position_min = 0
position_endstop = 247
position_max = 247
homing_speed = 80
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG9
position_min = 0
position_endstop = 257
position_max = 257
homing_speed = 60
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG10
position_max = 250
position_min = -2.5
homing_speed = 10.0
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = -0.369

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = PC1
enable_pin = !PA0
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE6
dir_pin = !PA14
enable_pin = !PE0
rotation_distance = 5.613
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PF4
min_temp = 0
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
max_extrude_only_distance = 200
pressure_advance = 0.04
pressure_advance_smooth_time = 0.040
control = pid
pid_kp = 29.726
pid_ki = 3.539
pid_kd = 62.424

[tmc2209 extruder]
uart_pin = PD3
interpolate = false
run_current = 0.55
sense_resistor = 0.110
stealthchop_threshold = 0

[verify_heater extruder]
max_error = 120
check_gain_time = 20
hysteresis = 5
heating_gain = 2

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.68
min_temp = 0
max_temp = 120
control = pid
pid_kp = 38.757
pid_ki = 1.485
pid_kd = 252.888

[verify_heater heater_bed]
max_error = 120
check_gain_time = 90
hysteresis = 5
heating_gain = 2

[probe]
pin = PG15
x_offset = 0
y_offset = 19.75
z_offset = 6.42
speed = 10
lift_speed = 25
samples = 3
samples_result = median
sample_retract_dist = 0.8
samples_tolerance = 0.007
samples_tolerance_retries = 10

[z_tilt]
z_positions = 
	-46, 20
	125, 313
	296, 20
points = 
	30, 5
	125, 195
	220, 5
speed = 350
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075

[bed_mesh]
speed = 350
horizontal_move_z = 10
mesh_min = 40,40
mesh_max = 210,210
fade_start = 0.6
fade_end = 10.0
probe_count = 9,9
algorithm = bicubic
relative_reference_index = 12
mesh_pps = 2,2

[output_pin light]
pin = PB10
pwm = true
shutdown_value = 0
value = 100
scale = 100
cycle_time = 0.010

[gcode_macro light_off]
gcode = 
	set_pin pin=light value=0

[gcode_macro light_dim]
gcode = 
	set_pin pin=light value=25

[gcode_macro light_on]
gcode = 
	{% set S = params.S|default(100)|float %}
	set_pin pin=light value={S}

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
max_temp = 100

[temperature_sensor chamber]
sensor_type = Generic 3950
sensor_pin = PF5
min_temp = 0
max_temp = 75
gcode_id = chamber
=======================
Declaration of '__main __octoprint' hides previous menuitem declaration
Declaration of '__main __setup __calib __delta_calib_auto' hides previous menuitem declaration
Declaration of '__main __setup __calib __delta_calib_man' hides previous menuitem declaration
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1965720040: New connection
webhooks client 1965720040: Client info {'program': 'Moonraker', 'version': 'v0.7.1-783-gf7d8af6'}
Loaded MCU 'mcu' 105 commands (v0.11.0-41-g9b60daf6 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
mcu 'rpi': Starting connect
Loaded MCU 'rpi' 111 commands (v0.10.0-571-g97a5b39a / gcc: (Raspbian 8.3.0-6+rpi1) 8.3.0 binutils: (GNU Binutils for Raspbian) 2.31.1)
MCU 'rpi' config: PCA9685_MAX=4096 ADC_MAX=4095 PWM_MAX=32768 CLOCK_FREQ=50000000 MCU=linux STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-268.181818 slope=1294.861660
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Sending MCU 'rpi' printer configuration...
Configured MCU 'rpi' (1024 moves)
Starting heater checks for extruder
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 20.2)    | (40.0, 40.0)
  1   | (61.2, 20.2)    | (61.2, 40.0)
  2   | (82.5, 20.2)    | (82.5, 40.0)
  3   | (103.8, 20.2)   | (103.8, 40.0)
  4   | (125.0, 20.2)   | (125.0, 40.0)
  5   | (146.2, 20.2)   | (146.2, 40.0)
  6   | (167.5, 20.2)   | (167.5, 40.0)
  7   | (188.8, 20.2)   | (188.8, 40.0)
  8   | (210.0, 20.2)   | (210.0, 40.0)
  9   | (210.0, 41.5)   | (210.0, 61.2)
  10  | (188.8, 41.5)   | (188.8, 61.2)
  11  | (167.5, 41.5)   | (167.5, 61.2)
  12  | (146.2, 41.5)   | (146.2, 61.2)
  13  | (125.0, 41.5)   | (125.0, 61.2)
  14  | (103.8, 41.5)   | (103.8, 61.2)
  15  | (82.5, 41.5)    | (82.5, 61.2)
  16  | (61.2, 41.5)    | (61.2, 61.2)
  17  | (40.0, 41.5)    | (40.0, 61.2)
  18  | (40.0, 62.8)    | (40.0, 82.5)
  19  | (61.2, 62.8)    | (61.2, 82.5)
  20  | (82.5, 62.8)    | (82.5, 82.5)
  21  | (103.8, 62.8)   | (103.8, 82.5)
  22  | (125.0, 62.8)   | (125.0, 82.5)
  23  | (146.2, 62.8)   | (146.2, 82.5)
  24  | (167.5, 62.8)   | (167.5, 82.5)
  25  | (188.8, 62.8)   | (188.8, 82.5)
  26  | (210.0, 62.8)   | (210.0, 82.5)
  27  | (210.0, 84.0)   | (210.0, 103.8)
  28  | (188.8, 84.0)   | (188.8, 103.8)
  29  | (167.5, 84.0)   | (167.5, 103.8)
  30  | (146.2, 84.0)   | (146.2, 103.8)
  31  | (125.0, 84.0)   | (125.0, 103.8)
  32  | (103.8, 84.0)   | (103.8, 103.8)
  33  | (82.5, 84.0)    | (82.5, 103.8)
  34  | (61.2, 84.0)    | (61.2, 103.8)
  35  | (40.0, 84.0)    | (40.0, 103.8)
  36  | (40.0, 105.2)   | (40.0, 125.0)
  37  | (61.2, 105.2)   | (61.2, 125.0)
  38  | (82.5, 105.2)   | (82.5, 125.0)
  39  | (103.8, 105.2)  | (103.8, 125.0)
  40  | (125.0, 105.2)  | (125.0, 125.0)
  41  | (146.2, 105.2)  | (146.2, 125.0)
  42  | (167.5, 105.2)  | (167.5, 125.0)
  43  | (188.8, 105.2)  | (188.8, 125.0)
  44  | (210.0, 105.2)  | (210.0, 125.0)
  45  | (210.0, 126.5)  | (210.0, 146.2)
  46  | (188.8, 126.5)  | (188.8, 146.2)
  47  | (167.5, 126.5)  | (167.5, 146.2)
  48  | (146.2, 126.5)  | (146.2, 146.2)
  49  | (125.0, 126.5)  | (125.0, 146.2)
  50  | (103.8, 126.5)  | (103.8, 146.2)
  51  | (82.5, 126.5)   | (82.5, 146.2)
  52  | (61.2, 126.5)   | (61.2, 146.2)
  53  | (40.0, 126.5)   | (40.0, 146.2)
  54  | (40.0, 147.8)   | (40.0, 167.5)
  55  | (61.2, 147.8)   | (61.2, 167.5)
  56  | (82.5, 147.8)   | (82.5, 167.5)
  57  | (103.8, 147.8)  | (103.8, 167.5)
  58  | (125.0, 147.8)  | (125.0, 167.5)
  59  | (146.2, 147.8)  | (146.2, 167.5)
  60  | (167.5, 147.8)  | (167.5, 167.5)
  61  | (188.8, 147.8)  | (188.8, 167.5)
  62  | (210.0, 147.8)  | (210.0, 167.5)
  63  | (210.0, 169.0)  | (210.0, 188.8)
  64  | (188.8, 169.0)  | (188.8, 188.8)
  65  | (167.5, 169.0)  | (167.5, 188.8)
  66  | (146.2, 169.0)  | (146.2, 188.8)
  67  | (125.0, 169.0)  | (125.0, 188.8)
  68  | (103.8, 169.0)  | (103.8, 188.8)
  69  | (82.5, 169.0)   | (82.5, 188.8)
  70  | (61.2, 169.0)   | (61.2, 188.8)
  71  | (40.0, 169.0)   | (40.0, 188.8)
  72  | (40.0, 190.2)   | (40.0, 210.0)
  73  | (61.2, 190.2)   | (61.2, 210.0)
  74  | (82.5, 190.2)   | (82.5, 210.0)
  75  | (103.8, 190.2)  | (103.8, 210.0)
  76  | (125.0, 190.2)  | (125.0, 210.0)
  77  | (146.2, 190.2)  | (146.2, 210.0)
  78  | (167.5, 190.2)  | (167.5, 210.0)
  79  | (188.8, 190.2)  | (188.8, 210.0)
  80  | (210.0, 190.2)  | (210.0, 210.0)
bed_mesh: relative_reference_index 12 is (146.25, 61.25)
Stats 42.7: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=3295 bytes_read=6330 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3017 freq=179997868 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=817 bytes_read=4470 bytes_retransmit=0 bytes_invalid=0 send_seq=111 receive_seq=111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49994258 adj=49994963  heater_bed: target=0 temp=0.0 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=0.0 chamber: temp=0.0 sysload=1.99 cputime=15.167 memavail=703372 print_time=0.008 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965720040
webhooks: registering remote method 'reboot_machine' for connection id: 1965720040
webhooks: registering remote method 'pause_job_queue' for connection id: 1965720040
webhooks: registering remote method 'start_job_queue' for connection id: 1965720040
Klipper INIT done
Stats 43.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=7154 bytes_read=6834 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=179999346 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=823 bytes_read=4486 bytes_retransmit=0 bytes_invalid=0 send_seq=112 receive_seq=112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49996545 adj=49994194  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=24.0 chamber: temp=19.6 sysload=1.99 cputime=15.354 memavail=702888 print_time=45.185 buffer_time=0.250 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 44.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=7645 bytes_read=7151 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=180000858 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=829 bytes_read=4502 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49997939 adj=49995054  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=24.1 chamber: temp=19.5 sysload=1.99 cputime=15.415 memavail=702688 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 45.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=7777 bytes_read=7359 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000812 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=835 bytes_read=4518 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998894 adj=49997028  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=24.2 chamber: temp=19.5 sysload=1.91 cputime=15.455 memavail=702680 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 46.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=7783 bytes_read=7553 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001134 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000021 bytes_write=841 bytes_read=4549 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999283 adj=49999141  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=24.2 chamber: temp=19.5 sysload=1.91 cputime=15.493 memavail=702352 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 47.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=7789 bytes_read=7781 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001249 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000021 bytes_write=847 bytes_read=4565 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999792 adj=49999011  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.2 chamber: temp=19.5 sysload=1.91 cputime=15.526 memavail=702192 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 48.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000016 mcu_task_stddev=0.000038 bytes_write=7863 bytes_read=7984 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001251 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000021 bytes_write=853 bytes_read=4581 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999891 adj=50000183  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.91 cputime=15.571 memavail=702192 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 49.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000033 bytes_write=7937 bytes_read=8217 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000021 bytes_write=859 bytes_read=4597 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999853 adj=50000265  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.4 chamber: temp=19.5 sysload=1.91 cputime=15.612 memavail=702456 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 50.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000033 bytes_write=7943 bytes_read=8454 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001762 rpi: mcu_awake=0.004 mcu_task_avg=0.000029 mcu_task_stddev=0.000021 bytes_write=865 bytes_read=4613 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999956 adj=49999859  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.3 chamber: temp=19.5 sysload=1.84 cputime=15.654 memavail=703224 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 51.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000033 bytes_write=8017 bytes_read=8657 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001825 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=871 bytes_read=4642 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999984 adj=49999742  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.3 chamber: temp=19.5 sysload=1.84 cputime=15.694 memavail=703224 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 52.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000033 bytes_write=8091 bytes_read=8875 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001762 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=877 bytes_read=4658 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999999 adj=49999705  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.4 chamber: temp=19.5 sysload=1.84 cputime=15.736 memavail=702984 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 53.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000012 mcu_task_stddev=0.000033 bytes_write=8097 bytes_read=9112 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=883 bytes_read=4674 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000015 adj=49999768  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=24.3 chamber: temp=19.5 sysload=1.84 cputime=15.776 memavail=702984 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 54.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=8103 bytes_read=9320 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001746 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=889 bytes_read=4690 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000007 adj=49999801  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.2 chamber: temp=19.5 sysload=1.84 cputime=15.815 memavail=702984 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 55.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=8177 bytes_read=9538 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001718 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=895 bytes_read=4706 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000009 adj=49999681  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.77 cputime=15.856 memavail=702992 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 56.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=8183 bytes_read=9775 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001757 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=901 bytes_read=4735 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000174 adj=49999686  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.77 cputime=15.894 memavail=702992 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 57.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=8257 bytes_read=9978 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001773 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=907 bytes_read=4751 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000137 adj=50000341  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.3 chamber: temp=19.5 sysload=1.77 cputime=15.936 memavail=702992 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 58.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=8399 bytes_read=10206 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001743 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=919 bytes_read=4783 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000094 adj=49999978  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.77 cputime=15.981 memavail=702744 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 59.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=8405 bytes_read=10458 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001834 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=925 bytes_read=4799 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000053 adj=49999729  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.4 chamber: temp=19.5 sysload=1.77 cputime=16.034 memavail=703220 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 60.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=8547 bytes_read=10671 bytes_retransmit=9 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001776 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=931 bytes_read=4815 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000047 adj=49999361  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.79 cputime=16.127 memavail=701352 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 61.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=8553 bytes_read=10879 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001760 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=937 bytes_read=4844 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000053 adj=49999463  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.4 chamber: temp=19.5 sysload=1.79 cputime=16.196 memavail=701368 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 62.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=8695 bytes_read=11136 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001733 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=943 bytes_read=4860 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000058 adj=49999540  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.4 chamber: temp=19.5 sysload=1.79 cputime=16.268 memavail=701368 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 63.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=8769 bytes_read=11339 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001714 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=949 bytes_read=4876 bytes_retransmit=0 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000070 adj=49999618  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.5 chamber: temp=19.4 sysload=1.79 cputime=16.338 memavail=701368 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 64.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=8911 bytes_read=11582 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001717 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=955 bytes_read=4892 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000072 adj=49999708  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=24.5 chamber: temp=19.4 sysload=1.79 cputime=16.411 memavail=701364 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 65.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=8985 bytes_read=11829 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001706 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000019 bytes_write=961 bytes_read=4908 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000065 adj=49999691  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.4 chamber: temp=19.5 sysload=1.73 cputime=16.482 memavail=701364 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 66.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=8991 bytes_read=12022 bytes_retransmit=9 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001695 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=967 bytes_read=4937 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000058 adj=49999642  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.73 cputime=16.552 memavail=701364 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 67.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=8997 bytes_read=12230 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001700 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=973 bytes_read=4953 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000044 adj=49999601  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.6 chamber: temp=19.6 sysload=1.73 cputime=16.624 memavail=701372 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 68.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000009 mcu_task_stddev=0.000026 bytes_write=9003 bytes_read=12467 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001704 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=979 bytes_read=4969 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000037 adj=49999498  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.73 cputime=16.693 memavail=701372 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 69.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=9077 bytes_read=12685 bytes_retransmit=9 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001698 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=985 bytes_read=4985 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000028 adj=49999464  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.73 cputime=16.765 memavail=701372 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 70.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=9083 bytes_read=12880 bytes_retransmit=9 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001696 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=991 bytes_read=5001 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000022 adj=49999435  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=33.2 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.67 cputime=16.834 memavail=701128 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 71.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=9157 bytes_read=13119 bytes_retransmit=9 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001719 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=997 bytes_read=5030 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999428  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.67 cputime=16.906 memavail=701128 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 72.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=9299 bytes_read=13332 bytes_retransmit=9 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001719 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1003 bytes_read=5046 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000045 adj=49999369  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.67 cputime=16.975 memavail=701128 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 73.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=9373 bytes_read=13550 bytes_retransmit=9 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001711 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1009 bytes_read=5062 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000038 adj=49999627  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.5 sysload=1.67 cputime=17.044 memavail=701140 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 74.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9515 bytes_read=13822 bytes_retransmit=9 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001705 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1015 bytes_read=5078 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000041 adj=49999578  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.6 chamber: temp=19.5 sysload=1.67 cputime=17.118 memavail=701140 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 75.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9589 bytes_read=14025 bytes_retransmit=9 bytes_invalid=0 send_seq=447 receive_seq=447 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001704 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1021 bytes_read=5094 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000059 adj=49999609  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.6 chamber: temp=19.5 sysload=1.62 cputime=17.189 memavail=701140 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 76.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9595 bytes_read=14247 bytes_retransmit=9 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001699 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=1027 bytes_read=5123 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000078 adj=49999741  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.5 chamber: temp=19.4 sysload=1.62 cputime=17.258 memavail=701036 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 77.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9669 bytes_read=14480 bytes_retransmit=9 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001700 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=1033 bytes_read=5139 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000101 adj=49999873  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.62 cputime=17.326 memavail=701140 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 78.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000023 bytes_write=9743 bytes_read=14683 bytes_retransmit=9 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001683 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=1039 bytes_read=5155 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000113 adj=49999992  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.6 chamber: temp=19.5 sysload=1.62 cputime=17.395 memavail=701140 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 79.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=9817 bytes_read=14930 bytes_retransmit=9 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001693 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=1045 bytes_read=5171 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000125 adj=50000045  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.62 cputime=17.471 memavail=701152 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 80.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=9954 bytes_read=15168 bytes_retransmit=9 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001713 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000023 bytes_write=1051 bytes_read=5187 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000134 adj=50000017  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.57 cputime=17.548 memavail=701348 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 81.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=10028 bytes_read=15371 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001710 rpi: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000022 bytes_write=1057 bytes_read=5216 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000145 adj=49999954  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.57 cputime=17.620 memavail=701408 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 82.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=10108 bytes_read=15619 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000022 bytes_write=1063 bytes_read=5232 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000155 adj=49999993  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.8 chamber: temp=19.6 sysload=1.57 cputime=17.695 memavail=701376 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 83.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=10114 bytes_read=15842 bytes_retransmit=9 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001744 rpi: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000022 bytes_write=1069 bytes_read=5248 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000192 adj=49999942  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.57 cputime=17.766 memavail=701408 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 84.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=10188 bytes_read=16060 bytes_retransmit=9 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001750 rpi: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000022 bytes_write=1075 bytes_read=5264 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000199 adj=50000183  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.7 chamber: temp=19.5 sysload=1.57 cputime=17.842 memavail=701408 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 85.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=10194 bytes_read=16282 bytes_retransmit=9 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001749 rpi: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000022 bytes_write=1081 bytes_read=5280 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000208 adj=50000110  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.8 chamber: temp=19.5 sysload=1.44 cputime=17.913 memavail=701420 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 86.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=10268 bytes_read=16515 bytes_retransmit=9 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001752 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=1087 bytes_read=5309 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000215 adj=50000103  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.8 chamber: temp=19.5 sysload=1.44 cputime=17.989 memavail=701420 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 87.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=10410 bytes_read=16728 bytes_retransmit=9 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001756 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=1093 bytes_read=5325 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000220 adj=50000061  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.6 chamber: temp=19.5 sysload=1.44 cputime=18.062 memavail=701420 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 88.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000024 bytes_write=10552 bytes_read=16970 bytes_retransmit=9 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001751 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=1099 bytes_read=5341 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000234 adj=50000018  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=33.8 mcu_temp: temp=24.8 chamber: temp=19.5 sysload=1.44 cputime=18.140 memavail=701512 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 89.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=10694 bytes_read=17228 bytes_retransmit=9 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001752 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=1105 bytes_read=5357 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000244 adj=50000095  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=24.8 chamber: temp=19.6 sysload=1.44 cputime=18.215 memavail=701684 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 90.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=10700 bytes_read=17421 bytes_retransmit=9 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001744 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000025 bytes_write=1111 bytes_read=5373 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000248 adj=50000110  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.8 chamber: temp=19.6 sysload=1.33 cputime=18.287 memavail=701684 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 91.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=10706 bytes_read=17658 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001739 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=1117 bytes_read=5402 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000281 adj=50000086  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.9 chamber: temp=19.5 sysload=1.33 cputime=18.359 memavail=701936 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 92.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=10780 bytes_read=17876 bytes_retransmit=9 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001742 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=1123 bytes_read=5418 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000292 adj=50000350  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=34.3 mcu_temp: temp=24.8 chamber: temp=19.5 sysload=1.33 cputime=18.430 memavail=701936 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 93.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=10786 bytes_read=18068 bytes_retransmit=9 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001735 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=1129 bytes_read=5434 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000299 adj=50000320  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.9 chamber: temp=19.5 sysload=1.33 cputime=18.504 memavail=701936 print_time=45.185 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Z not homed, forcing full G28
Homing X
Homing Y
Homing Z
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
SET_KINEMATIC_POSITION pos=0.000,0.000,0.000
TMC 'stepper_z' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z1' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_z2' reports GSTAT:      00000001 reset=1(Reset)
Stats 94.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=13602 bytes_read=19450 bytes_retransmit=9 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001717 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=1135 bytes_read=5450 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000299 adj=50000279  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=24.7 chamber: temp=19.6 sysload=1.33 cputime=18.876 memavail=701444 print_time=97.962 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
TMC 'stepper_z' reports GSTAT:      00000000
TMC 'stepper_z1' reports GSTAT:      00000000
TMC 'stepper_z2' reports GSTAT:      00000000
Stats 95.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=14107 bytes_read=19822 bytes_retransmit=9 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001720 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=1141 bytes_read=5466 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000300 adj=49999955  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=1.22 cputime=18.965 memavail=701444 print_time=97.962 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000001 reset=1(Reset)
TMC 'stepper_y' reports GSTAT:      00000001 reset=1(Reset)
Stats 96.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=15185 bytes_read=20846 bytes_retransmit=9 bytes_invalid=0 send_seq=655 receive_seq=655 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001725 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000028 bytes_write=1147 bytes_read=5481 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000302 adj=49999962  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=25.0 chamber: temp=19.7 sysload=1.22 cputime=19.156 memavail=701444 print_time=98.162 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
TMC 'stepper_x' reports GSTAT:      00000000
TMC 'stepper_y' reports GSTAT:      00000000
Stats 97.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=15997 bytes_read=21616 bytes_retransmit=9 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001721 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1153 bytes_read=5509 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000294 adj=49999964  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=24.9 chamber: temp=19.6 sysload=1.22 cputime=19.275 memavail=701696 print_time=99.162 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 98.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=17783 bytes_read=22641 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001716 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1159 bytes_read=5524 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000298 adj=49999967  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=25.0 chamber: temp=19.5 sysload=1.22 cputime=19.489 memavail=701696 print_time=100.320 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 99.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=18703 bytes_read=23318 bytes_retransmit=9 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001708 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1165 bytes_read=5539 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000299 adj=49999978  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=1.22 cputime=19.625 memavail=701696 print_time=101.170 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 100.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=19369 bytes_read=24055 bytes_retransmit=9 bytes_invalid=0 send_seq=843 receive_seq=843 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001697 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1171 bytes_read=5554 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000298 adj=49999989  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=1.12 cputime=19.764 memavail=701964 print_time=102.170 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Probe already docked
Stats 101.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=20879 bytes_read=25052 bytes_retransmit=9 bytes_invalid=0 send_seq=905 receive_seq=905 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001695 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1177 bytes_read=5570 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000297 adj=49999965  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.5 sysload=1.12 cputime=19.932 memavail=701964 print_time=103.329 buffer_time=0.328 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 102.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=21658 bytes_read=25540 bytes_retransmit=9 bytes_invalid=0 send_seq=927 receive_seq=927 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001704 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1183 bytes_read=5599 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000302 adj=49999922  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=24.9 chamber: temp=19.5 sysload=1.12 cputime=20.199 memavail=701964 print_time=104.423 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 103.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000023 bytes_write=23167 bytes_read=26266 bytes_retransmit=9 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001713 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1189 bytes_read=5615 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000296 adj=49999921  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=1.12 cputime=20.325 memavail=701464 print_time=105.173 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 104.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=24011 bytes_read=27023 bytes_retransmit=9 bytes_invalid=0 send_seq=1014 receive_seq=1014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001704 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1195 bytes_read=5631 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000296 adj=49999812  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=1.12 cputime=20.483 memavail=701464 print_time=106.173 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 105.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=24792 bytes_read=27731 bytes_retransmit=9 bytes_invalid=0 send_seq=1054 receive_seq=1054 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001706 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1201 bytes_read=5647 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000295 adj=49999839  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.0 chamber: temp=19.5 sysload=1.03 cputime=20.641 memavail=701464 print_time=107.173 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 106.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=25679 bytes_read=28503 bytes_retransmit=9 bytes_invalid=0 send_seq=1098 receive_seq=1098 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001700 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1207 bytes_read=5663 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000288 adj=49999813  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.5 sysload=1.03 cputime=20.783 memavail=701376 print_time=108.223 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 107.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=26513 bytes_read=29211 bytes_retransmit=9 bytes_invalid=0 send_seq=1137 receive_seq=1135 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001694 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1213 bytes_read=5692 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000282 adj=49999756  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=1.03 cputime=20.906 memavail=701376 print_time=109.223 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 108.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=28315 bytes_read=30086 bytes_retransmit=9 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=180001698 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1219 bytes_read=5708 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000276 adj=49999719  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=1.03 cputime=21.030 memavail=701476 print_time=110.398 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 109.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=29281 bytes_read=30791 bytes_retransmit=9 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001706 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1225 bytes_read=5724 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000275 adj=49999666  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=1.03 cputime=21.170 memavail=701444 print_time=111.198 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 110.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31449 bytes_read=31662 bytes_retransmit=9 bytes_invalid=0 send_seq=1292 receive_seq=1292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001999 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1231 bytes_read=5740 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000273 adj=49999655  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=1.03 cputime=21.436 memavail=700924 print_time=113.819 buffer_time=1.813 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 111.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31731 bytes_read=32105 bytes_retransmit=9 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001979 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1237 bytes_read=5756 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000269 adj=49998820  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.4 sysload=1.03 cputime=21.523 memavail=700976 print_time=113.819 buffer_time=0.813 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 112.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=31877 bytes_read=32572 bytes_retransmit=9 bytes_invalid=0 send_seq=1318 receive_seq=1318 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001966 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=1243 bytes_read=5785 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000268 adj=49998838  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=1.03 cputime=21.657 memavail=700984 print_time=114.079 buffer_time=0.071 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Z Tilt Adjust
probe: TRIGGERED
Attaching Probe
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 113.8: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=32515 bytes_read=33111 bytes_retransmit=9 bytes_invalid=0 send_seq=1342 receive_seq=1342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001934 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=1249 bytes_read=5801 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000267 adj=49998870  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.0 chamber: temp=19.6 sysload=1.03 cputime=22.025 memavail=700984 print_time=115.323 buffer_time=0.315 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 114.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=33439 bytes_read=33614 bytes_retransmit=9 bytes_invalid=0 send_seq=1366 receive_seq=1366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001925 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=1255 bytes_read=5817 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000268 adj=49999169  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.0 chamber: temp=19.5 sysload=1.03 cputime=22.158 memavail=700984 print_time=116.667 buffer_time=0.658 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 115.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=33721 bytes_read=34101 bytes_retransmit=9 bytes_invalid=0 send_seq=1381 receive_seq=1381 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001916 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=1261 bytes_read=5833 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000266 adj=49999401  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=0.95 cputime=22.396 memavail=700984 print_time=117.071 buffer_time=0.061 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 116.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=36353 bytes_read=34800 bytes_retransmit=9 bytes_invalid=0 send_seq=1439 receive_seq=1439 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001894 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000030 bytes_write=1267 bytes_read=5849 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000268 adj=49999445  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.5 sysload=0.95 cputime=22.702 memavail=700984 print_time=119.815 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 117.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=36635 bytes_read=35239 bytes_retransmit=9 bytes_invalid=0 send_seq=1454 receive_seq=1454 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001877 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1273 bytes_read=5878 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000266 adj=49999750  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=0.95 cputime=22.827 memavail=700984 print_time=119.815 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 118.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=37484 bytes_read=35819 bytes_retransmit=9 bytes_invalid=0 send_seq=1483 receive_seq=1483 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001867 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1279 bytes_read=5894 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000262 adj=49999774  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.3 chamber: temp=19.6 sysload=0.95 cputime=22.967 memavail=701008 print_time=120.215 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
probe at 30.000,5.000 is z=6.499125
Stats 119.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=39469 bytes_read=36700 bytes_retransmit=9 bytes_invalid=0 send_seq=1543 receive_seq=1543 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001851 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1285 bytes_read=5910 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000257 adj=49999765  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=0.95 cputime=23.124 memavail=701008 print_time=121.218 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
probe at 30.000,5.000 is z=6.496625
probe at 30.000,5.000 is z=6.494750
Stats 120.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=42977 bytes_read=37823 bytes_retransmit=9 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001833 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1291 bytes_read=5926 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000255 adj=49999752  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.3 sysload=0.87 cputime=23.355 memavail=701520 print_time=123.387 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 121.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=43534 bytes_read=38330 bytes_retransmit=9 bytes_invalid=0 send_seq=1649 receive_seq=1649 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001817 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1297 bytes_read=5942 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000250 adj=49999792  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.5 sysload=0.87 cputime=23.444 memavail=701264 print_time=123.387 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
probe at 125.000,195.000 is z=6.507250
Stats 122.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=45480 bytes_read=39220 bytes_retransmit=9 bytes_invalid=0 send_seq=1710 receive_seq=1710 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001806 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1303 bytes_read=5971 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000247 adj=49999772  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.1 chamber: temp=19.5 sysload=0.87 cputime=23.633 memavail=701264 print_time=124.450 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
probe at 125.000,195.000 is z=6.508500
Stats 123.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=47310 bytes_read=40022 bytes_retransmit=9 bytes_invalid=0 send_seq=1762 receive_seq=1762 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001787 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1309 bytes_read=5987 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000247 adj=49999775  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=34.9 mcu_temp: temp=25.1 chamber: temp=19.6 sysload=0.87 cputime=23.754 memavail=701264 print_time=125.232 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe at 125.000,195.000 is z=6.504750
Stats 124.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=50147 bytes_read=40969 bytes_retransmit=9 bytes_invalid=0 send_seq=1831 receive_seq=1831 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001777 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1315 bytes_read=6003 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000244 adj=49999835  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.3 chamber: temp=19.6 sysload=0.87 cputime=23.961 memavail=701524 print_time=126.919 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 125.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=50943 bytes_read=41510 bytes_retransmit=9 bytes_invalid=0 send_seq=1857 receive_seq=1857 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001780 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1321 bytes_read=6019 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000237 adj=49999805  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.2 chamber: temp=19.6 sysload=0.80 cputime=24.066 memavail=701524 print_time=127.219 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
probe at 220.000,5.000 is z=6.484750
Stats 126.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=52753 bytes_read=42351 bytes_retransmit=9 bytes_invalid=0 send_seq=1914 receive_seq=1914 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001778 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1327 bytes_read=6035 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000235 adj=49999690  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.3 sysload=0.80 cputime=24.228 memavail=701524 print_time=128.221 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe at 220.000,5.000 is z=6.485375
probe at 220.000,5.000 is z=6.485375
Calculating bed tilt with: [[29.99999999951686, 4.999999999581846, 6.496624999994703], [124.99999999983675, 194.99999999987585, 6.507249999990789], [219.99999999976637, 4.999999999600618, 6.485374999984698]]
Coordinate descent initial error: 0.0177578437456
Coordinate descent best_err: 8.35340022052e-11  rounds: 188
Calculated bed tilt parameters: {'y_adjust': 8.552218489559888e-05, 'x_adjust': -5.918015812654516e-05, 'z_adjust': 6.49797487779177}
Making the following Z adjustments:
stepper_z = 0.080719
stepper_z1 = 0.095657
stepper_z2 = 0.060479
Retries: 0/5 Probed points range: 0.021875 tolerance: 0.007500
Stats 127.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=56861 bytes_read=43612 bytes_retransmit=9 bytes_invalid=0 send_seq=2014 receive_seq=2014 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001780 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1339 bytes_read=6080 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000227 adj=49999686  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.3 chamber: temp=19.5 sysload=0.80 cputime=24.511 memavail=701528 print_time=130.577 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 128.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=57239 bytes_read=44055 bytes_retransmit=9 bytes_invalid=0 send_seq=2029 receive_seq=2029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001771 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1345 bytes_read=6096 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000226 adj=49999606  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.3 chamber: temp=19.6 sysload=0.80 cputime=24.588 memavail=701528 print_time=130.577 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 129.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=58346 bytes_read=44848 bytes_retransmit=9 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1351 bytes_read=6112 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000223 adj=49999619  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.3 chamber: temp=19.9 sysload=0.80 cputime=24.718 memavail=701528 print_time=131.281 buffer_time=0.226 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
probe at 30.000,5.000 is z=6.418271
probe at 30.000,5.000 is z=6.418896
Stats 130.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=60932 bytes_read=45796 bytes_retransmit=9 bytes_invalid=0 send_seq=2140 receive_seq=2140 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1357 bytes_read=6128 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000223 adj=49999640  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.3 chamber: temp=19.6 sysload=0.74 cputime=24.849 memavail=701200 print_time=132.403 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
probe at 30.000,5.000 is z=6.418896
Stats 131.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=63927 bytes_read=46708 bytes_retransmit=9 bytes_invalid=0 send_seq=2214 receive_seq=2214 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001743 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1363 bytes_read=6144 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000217 adj=49999700  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.3 chamber: temp=19.6 sysload=0.74 cputime=25.063 memavail=701288 print_time=134.102 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 132.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=64476 bytes_read=47191 bytes_retransmit=9 bytes_invalid=0 send_seq=2234 receive_seq=2234 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001735 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1369 bytes_read=6173 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000216 adj=49999665  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.2 chamber: temp=19.5 sysload=0.74 cputime=25.155 memavail=701288 print_time=134.252 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe at 125.000,195.000 is z=6.420146
Stats 133.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=66382 bytes_read=48105 bytes_retransmit=9 bytes_invalid=0 send_seq=2294 receive_seq=2294 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001727 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1375 bytes_read=6189 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000219 adj=49999688  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.5 chamber: temp=19.5 sysload=0.74 cputime=25.327 memavail=701280 print_time=135.260 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
probe at 125.000,195.000 is z=6.417646
Stats 134.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=68514 bytes_read=48991 bytes_retransmit=9 bytes_invalid=0 send_seq=2354 receive_seq=2354 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001723 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1381 bytes_read=6205 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000215 adj=49999765  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.2 chamber: temp=19.5 sysload=0.74 cputime=25.496 memavail=701288 print_time=136.250 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe at 125.000,195.000 is z=6.416396
Stats 135.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=70855 bytes_read=49824 bytes_retransmit=9 bytes_invalid=0 send_seq=2412 receive_seq=2412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1387 bytes_read=6221 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000209 adj=49999720  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.4 chamber: temp=19.5 sysload=0.76 cputime=25.675 memavail=701288 print_time=137.647 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 136.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=71778 bytes_read=50457 bytes_retransmit=9 bytes_invalid=0 send_seq=2445 receive_seq=2445 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001729 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1393 bytes_read=6237 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000206 adj=49999625  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.5 chamber: temp=19.6 sysload=0.76 cputime=25.808 memavail=701032 print_time=138.247 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
probe at 220.000,5.000 is z=6.420771
probe at 220.000,5.000 is z=6.420771
Stats 137.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=74468 bytes_read=51511 bytes_retransmit=9 bytes_invalid=0 send_seq=2521 receive_seq=2521 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1399 bytes_read=6266 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000201 adj=49999599  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.6 chamber: temp=19.3 sysload=0.76 cputime=25.987 memavail=701048 print_time=139.504 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe at 220.000,5.000 is z=6.420771
Calculating bed tilt with: [[29.999999999516845, 4.99999999958186, 6.418896068466008], [124.99999999983675, 194.99999999987585, 6.417646068462023], [219.99999999976637, 4.999999999600618, 6.4207710684573085]]
Coordinate descent initial error: 7.35420508308e-06
Coordinate descent best_err: 1.39350955983e-10  rounds: 175
Calculated bed tilt parameters: {'y_adjust': -1.1459413417137241e-05, 'x_adjust': 9.831404456354113e-06, 'z_adjust': 6.418654658759646}
Making the following Z adjustments:
stepper_z = -0.001800
stepper_z1 = -0.003477
stepper_z2 = 0.001562
Retries: 1/5 Probed points range: 0.003125 tolerance: 0.007500
Docking Probe
Stats 138.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=76766 bytes_read=52382 bytes_retransmit=9 bytes_invalid=0 send_seq=2581 receive_seq=2581 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001724 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1405 bytes_read=6282 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000190 adj=49999576  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.5 chamber: temp=19.6 sysload=0.76 cputime=26.197 memavail=701048 print_time=140.633 buffer_time=0.571 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 139.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=79131 bytes_read=53053 bytes_retransmit=9 bytes_invalid=0 send_seq=2631 receive_seq=2631 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001720 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1411 bytes_read=6298 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000173 adj=49999475  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.5 chamber: temp=19.6 sysload=0.76 cputime=26.378 memavail=701060 print_time=143.059 buffer_time=1.996 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 140.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=79413 bytes_read=53496 bytes_retransmit=9 bytes_invalid=0 send_seq=2646 receive_seq=2646 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001716 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1417 bytes_read=6314 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000157 adj=49999455  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.4 chamber: temp=19.4 sysload=0.78 cputime=26.466 memavail=701324 print_time=143.059 buffer_time=0.996 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 141.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=79627 bytes_read=53951 bytes_retransmit=9 bytes_invalid=0 send_seq=2659 receive_seq=2659 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001714 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1423 bytes_read=6330 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000141 adj=49999256  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.7 chamber: temp=19.6 sysload=0.78 cputime=26.579 memavail=701324 print_time=143.059 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 142.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=80436 bytes_read=54455 bytes_retransmit=9 bytes_invalid=0 send_seq=2683 receive_seq=2683 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1429 bytes_read=6359 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000115 adj=49999082  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.5 sysload=0.78 cputime=26.714 memavail=701212 print_time=144.545 buffer_time=0.477 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 143.9: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=81062 bytes_read=54922 bytes_retransmit=9 bytes_invalid=0 send_seq=2703 receive_seq=2703 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001729 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1435 bytes_read=6375 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000094 adj=49998735  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.6 chamber: temp=19.5 sysload=0.78 cputime=26.855 memavail=701324 print_time=145.261 buffer_time=0.190 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 144.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=81208 bytes_read=55404 bytes_retransmit=9 bytes_invalid=0 send_seq=2714 receive_seq=2714 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001723 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1441 bytes_read=6391 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000063 adj=49998586  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.5 chamber: temp=19.5 sysload=0.78 cputime=27.078 memavail=700944 print_time=146.662 buffer_time=0.589 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Homing Z
Stats 145.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=81456 bytes_read=55889 bytes_retransmit=9 bytes_invalid=0 send_seq=2730 receive_seq=2730 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001714 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1447 bytes_read=6407 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000031 adj=49998527  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.5 chamber: temp=19.6 sysload=0.95 cputime=27.408 memavail=701076 print_time=147.327 buffer_time=0.250 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 146.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=82334 bytes_read=56444 bytes_retransmit=9 bytes_invalid=0 send_seq=2758 receive_seq=2758 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001708 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1453 bytes_read=6423 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000003 adj=49998293  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.5 chamber: temp=19.6 sysload=0.95 cputime=27.690 memavail=701076 print_time=148.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 147.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=83646 bytes_read=57131 bytes_retransmit=9 bytes_invalid=0 send_seq=2799 receive_seq=2799 retransmit_seq=2 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001705 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1459 bytes_read=6452 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999967 adj=49998237  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.5 chamber: temp=19.4 sysload=0.95 cputime=27.793 memavail=701084 print_time=149.265 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 148.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=84417 bytes_read=57844 bytes_retransmit=9 bytes_invalid=0 send_seq=2837 receive_seq=2837 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001703 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1465 bytes_read=6468 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999929 adj=49997925  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.5 chamber: temp=19.5 sysload=0.95 cputime=27.930 memavail=700976 print_time=150.265 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 149.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=85198 bytes_read=58567 bytes_retransmit=9 bytes_invalid=0 send_seq=2877 receive_seq=2877 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001704 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1471 bytes_read=6484 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999896 adj=49997785  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.4 sysload=0.95 cputime=28.075 memavail=701088 print_time=151.265 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 150.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=87020 bytes_read=59414 bytes_retransmit=9 bytes_invalid=0 send_seq=2932 receive_seq=2932 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001699 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1477 bytes_read=6500 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999860 adj=49997721  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.6 sysload=0.96 cputime=28.235 memavail=701500 print_time=152.270 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 151.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=88057 bytes_read=60152 bytes_retransmit=9 bytes_invalid=0 send_seq=2975 receive_seq=2975 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001706 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1483 bytes_read=6516 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999824 adj=49997645  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.4 sysload=0.96 cputime=28.379 memavail=701600 print_time=153.270 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 152.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=90088 bytes_read=60936 bytes_retransmit=9 bytes_invalid=0 send_seq=3029 receive_seq=3029 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001702 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1489 bytes_read=6545 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999783 adj=49997540  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.7 sysload=0.96 cputime=28.672 memavail=701600 print_time=155.570 buffer_time=1.487 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 153.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000021 bytes_write=90234 bytes_read=61403 bytes_retransmit=9 bytes_invalid=0 send_seq=3040 receive_seq=3040 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001706 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1495 bytes_read=6561 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999750 adj=49997997  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=25.8 chamber: temp=19.7 sysload=0.96 cputime=28.786 memavail=701600 print_time=155.570 buffer_time=0.487 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 154.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=90737 bytes_read=61920 bytes_retransmit=9 bytes_invalid=0 send_seq=3061 receive_seq=3061 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001705 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1501 bytes_read=6577 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999715 adj=49997497  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.5 sysload=0.96 cputime=29.145 memavail=701604 print_time=156.274 buffer_time=0.190 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 155.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=92613 bytes_read=62501 bytes_retransmit=9 bytes_invalid=0 send_seq=3102 receive_seq=3102 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001710 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1507 bytes_read=6593 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49997301  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=25.8 chamber: temp=19.6 sysload=0.96 cputime=29.258 memavail=701604 print_time=157.847 buffer_time=0.763 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 156.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=92827 bytes_read=62978 bytes_retransmit=9 bytes_invalid=0 send_seq=3115 receive_seq=3115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001716 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1513 bytes_read=6609 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49997463  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.9 chamber: temp=19.7 sysload=0.96 cputime=29.366 memavail=701604 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 157.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=93579 bytes_read=63471 bytes_retransmit=9 bytes_invalid=0 send_seq=3137 receive_seq=3137 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001716 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1519 bytes_read=6638 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49997069  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.9 chamber: temp=19.6 sysload=0.96 cputime=29.495 memavail=701616 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 158.9: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=93861 bytes_read=63914 bytes_retransmit=9 bytes_invalid=0 send_seq=3152 receive_seq=3152 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001720 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1525 bytes_read=6654 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999574 adj=49997096  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.0 chamber: temp=19.6 sysload=0.96 cputime=29.603 memavail=701616 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 159.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=94007 bytes_read=64396 bytes_retransmit=9 bytes_invalid=0 send_seq=3163 receive_seq=3163 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001723 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1531 bytes_read=6670 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49997086  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.9 chamber: temp=19.5 sysload=0.96 cputime=29.704 memavail=701616 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 160.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=94289 bytes_read=64854 bytes_retransmit=9 bytes_invalid=0 send_seq=3178 receive_seq=3178 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001725 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1537 bytes_read=6686 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999510 adj=49997137  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=26.0 chamber: temp=19.6 sysload=0.97 cputime=29.814 memavail=701364 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 161.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=94435 bytes_read=65277 bytes_retransmit=9 bytes_invalid=0 send_seq=3189 receive_seq=3189 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001722 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1543 bytes_read=6702 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999475 adj=49997107  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.9 chamber: temp=19.6 sysload=0.97 cputime=29.895 memavail=700576 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 162.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=94649 bytes_read=65754 bytes_retransmit=9 bytes_invalid=0 send_seq=3202 receive_seq=3202 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001724 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1549 bytes_read=6731 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999443 adj=49997095  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.0 chamber: temp=19.6 sysload=0.97 cputime=29.995 memavail=700612 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 163.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000029 bytes_write=94863 bytes_read=66202 bytes_retransmit=9 bytes_invalid=0 send_seq=3215 receive_seq=3215 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001729 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1555 bytes_read=6747 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999411 adj=49997089  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.1 chamber: temp=19.6 sysload=0.97 cputime=30.103 memavail=700620 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 164.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=95009 bytes_read=66640 bytes_retransmit=9 bytes_invalid=0 send_seq=3226 receive_seq=3226 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001729 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1561 bytes_read=6763 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999380 adj=49997067  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=25.8 chamber: temp=19.6 sysload=0.97 cputime=30.208 memavail=700620 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 165.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=95223 bytes_read=67105 bytes_retransmit=9 bytes_invalid=0 send_seq=3239 receive_seq=3239 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1567 bytes_read=6779 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999348 adj=49997071  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.1 chamber: temp=19.6 sysload=0.97 cputime=30.313 memavail=700620 print_time=157.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 166.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=95976 bytes_read=67593 bytes_retransmit=9 bytes_invalid=0 send_seq=3262 receive_seq=3262 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001735 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=1573 bytes_read=6795 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999317 adj=49997046  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.0 chamber: temp=19.5 sysload=0.97 cputime=30.440 memavail=700576 print_time=168.146 buffer_time=0.054 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 167.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=96539 bytes_read=67836 bytes_retransmit=9 bytes_invalid=0 send_seq=3273 receive_seq=3273 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001734 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1579 bytes_read=6824 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999288 adj=49997060  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.1 chamber: temp=19.5 sysload=0.97 cputime=30.533 memavail=700624 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 168.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000015 bytes_write=96613 bytes_read=68083 bytes_retransmit=9 bytes_invalid=0 send_seq=3276 receive_seq=3276 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001734 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1585 bytes_read=6840 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999260 adj=49997048  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.0 chamber: temp=19.6 sysload=0.97 cputime=30.615 memavail=700624 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 169.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=96619 bytes_read=68306 bytes_retransmit=9 bytes_invalid=0 send_seq=3277 receive_seq=3277 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001739 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1591 bytes_read=6856 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999232 adj=49997072  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.0 chamber: temp=19.6 sysload=0.97 cputime=30.689 memavail=700884 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 170.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=96625 bytes_read=68499 bytes_retransmit=9 bytes_invalid=0 send_seq=3278 receive_seq=3278 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001741 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1597 bytes_read=6872 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999206 adj=49997063  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.2 chamber: temp=19.6 sysload=0.97 cputime=30.762 memavail=700884 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 171.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=96767 bytes_read=68756 bytes_retransmit=9 bytes_invalid=0 send_seq=3283 receive_seq=3283 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001738 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=1603 bytes_read=6888 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999181 adj=49997083  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.3 chamber: temp=19.6 sysload=0.97 cputime=30.844 memavail=700780 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 173.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=96773 bytes_read=68964 bytes_retransmit=9 bytes_invalid=0 send_seq=3284 receive_seq=3284 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1609 bytes_read=6917 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999158 adj=49997131  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.1 chamber: temp=19.6 sysload=0.97 cputime=30.919 memavail=700980 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 174.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000014 mcu_task_stddev=0.000036 bytes_write=96847 bytes_read=69167 bytes_retransmit=9 bytes_invalid=0 send_seq=3287 receive_seq=3287 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1615 bytes_read=6933 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999137 adj=49997185  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.3 chamber: temp=19.5 sysload=0.97 cputime=30.994 memavail=701140 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 175.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=96989 bytes_read=69439 bytes_retransmit=9 bytes_invalid=0 send_seq=3292 receive_seq=3292 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001738 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1621 bytes_read=6949 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999115 adj=49997239  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.2 chamber: temp=19.5 sysload=0.97 cputime=31.074 memavail=701140 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 176.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97131 bytes_read=69667 bytes_retransmit=9 bytes_invalid=0 send_seq=3297 receive_seq=3297 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1627 bytes_read=6965 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999092 adj=49997272  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.4 chamber: temp=19.5 sysload=0.97 cputime=31.153 memavail=701148 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 177.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97205 bytes_read=69870 bytes_retransmit=9 bytes_invalid=0 send_seq=3300 receive_seq=3300 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1633 bytes_read=6981 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999072 adj=49997273  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.3 chamber: temp=19.5 sysload=0.97 cputime=31.232 memavail=701148 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 178.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97211 bytes_read=70107 bytes_retransmit=9 bytes_invalid=0 send_seq=3301 receive_seq=3301 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001740 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1639 bytes_read=7010 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999052 adj=49997305  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.3 chamber: temp=19.5 sysload=0.97 cputime=31.313 memavail=701148 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 179.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97217 bytes_read=70315 bytes_retransmit=9 bytes_invalid=0 send_seq=3302 receive_seq=3302 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1645 bytes_read=7026 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999032 adj=49997306  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.4 chamber: temp=19.5 sysload=0.97 cputime=31.392 memavail=701152 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 180.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97291 bytes_read=70548 bytes_retransmit=9 bytes_invalid=0 send_seq=3305 receive_seq=3305 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001739 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1651 bytes_read=7042 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999014 adj=49997334  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.4 chamber: temp=19.5 sysload=0.97 cputime=31.465 memavail=701152 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 181.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97365 bytes_read=70795 bytes_retransmit=9 bytes_invalid=0 send_seq=3308 receive_seq=3308 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001743 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1657 bytes_read=7058 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998996 adj=49997350  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.5 chamber: temp=19.6 sysload=0.98 cputime=31.540 memavail=701048 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 182.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97439 bytes_read=70998 bytes_retransmit=9 bytes_invalid=0 send_seq=3311 receive_seq=3311 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001749 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1663 bytes_read=7074 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998980 adj=49997367  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.5 chamber: temp=19.5 sysload=0.98 cputime=31.613 memavail=700900 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 183.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97445 bytes_read=71206 bytes_retransmit=9 bytes_invalid=0 send_seq=3312 receive_seq=3312 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001757 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1669 bytes_read=7102 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998964 adj=49997380  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.6 chamber: temp=19.4 sysload=0.98 cputime=31.685 memavail=700900 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 184.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97451 bytes_read=71443 bytes_retransmit=9 bytes_invalid=0 send_seq=3313 receive_seq=3313 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001756 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1675 bytes_read=7117 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998949 adj=49997387  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=26.5 chamber: temp=19.5 sysload=0.98 cputime=31.756 memavail=700900 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 185.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97525 bytes_read=71661 bytes_retransmit=9 bytes_invalid=0 send_seq=3316 receive_seq=3316 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001755 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1681 bytes_read=7132 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998936 adj=49997432  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.6 chamber: temp=19.6 sysload=0.98 cputime=31.831 memavail=700796 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 186.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97531 bytes_read=71869 bytes_retransmit=9 bytes_invalid=0 send_seq=3317 receive_seq=3317 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001754 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1687 bytes_read=7147 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998924 adj=49997499  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.5 chamber: temp=19.7 sysload=0.98 cputime=31.902 memavail=700912 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 187.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97673 bytes_read=72126 bytes_retransmit=9 bytes_invalid=0 send_seq=3322 receive_seq=3322 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=1699 bytes_read=7178 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998912 adj=49997552  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.6 chamber: temp=19.6 sysload=0.98 cputime=31.982 memavail=700596 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 188.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97747 bytes_read=72329 bytes_retransmit=9 bytes_invalid=0 send_seq=3325 receive_seq=3325 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=1705 bytes_read=7207 bytes_retransmit=0 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998897 adj=49997481  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.6 chamber: temp=19.5 sysload=0.98 cputime=32.053 memavail=700672 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 189.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000022 bytes_write=97821 bytes_read=72561 bytes_retransmit=9 bytes_invalid=0 send_seq=3328 receive_seq=3328 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=1711 bytes_read=7223 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998886 adj=49997585  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.6 chamber: temp=19.5 sysload=0.98 cputime=32.125 memavail=700672 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 190.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=97827 bytes_read=72786 bytes_retransmit=9 bytes_invalid=0 send_seq=3329 receive_seq=3329 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001759 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=1717 bytes_read=7239 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998879 adj=49997615  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.6 chamber: temp=19.6 sysload=0.98 cputime=32.196 memavail=700764 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 191.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=97833 bytes_read=72971 bytes_retransmit=9 bytes_invalid=0 send_seq=3330 receive_seq=3330 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001756 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=1723 bytes_read=7255 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998871 adj=49997712  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.6 chamber: temp=19.6 sysload=0.98 cputime=32.269 memavail=701508 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 192.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=97839 bytes_read=73208 bytes_retransmit=9 bytes_invalid=0 send_seq=3331 receive_seq=3331 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001755 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000024 bytes_write=1729 bytes_read=7271 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998863 adj=49997774  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.7 chamber: temp=19.6 sysload=0.98 cputime=32.342 memavail=701684 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 193.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=97913 bytes_read=73426 bytes_retransmit=9 bytes_invalid=0 send_seq=3334 receive_seq=3334 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001752 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1735 bytes_read=7300 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998859 adj=49997809  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.8 chamber: temp=19.5 sysload=0.98 cputime=32.415 memavail=701408 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 194.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=98055 bytes_read=73639 bytes_retransmit=9 bytes_invalid=0 send_seq=3339 receive_seq=3339 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001752 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1741 bytes_read=7316 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998852 adj=49997909  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.8 chamber: temp=19.4 sysload=0.98 cputime=32.492 memavail=701444 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 195.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98129 bytes_read=73901 bytes_retransmit=9 bytes_invalid=0 send_seq=3342 receive_seq=3342 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1747 bytes_read=7332 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998846 adj=49997920  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=35.4 mcu_temp: temp=26.7 chamber: temp=19.4 sysload=0.98 cputime=32.567 memavail=701444 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 196.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98271 bytes_read=74129 bytes_retransmit=9 bytes_invalid=0 send_seq=3347 receive_seq=3347 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001757 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1753 bytes_read=7348 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998841 adj=49997933  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.8 chamber: temp=19.6 sysload=0.98 cputime=32.642 memavail=701640 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 197.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98277 bytes_read=74322 bytes_retransmit=9 bytes_invalid=0 send_seq=3348 receive_seq=3348 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000018 bytes_write=1759 bytes_read=7364 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998836 adj=49997952  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.6 chamber: temp=19.6 sysload=0.98 cputime=32.711 memavail=701696 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 198.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98364 bytes_read=74574 bytes_retransmit=9 bytes_invalid=0 send_seq=3352 receive_seq=3352 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001750 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=1765 bytes_read=7393 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998832 adj=49997991  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.9 chamber: temp=19.5 sysload=0.98 cputime=32.791 memavail=701696 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 199.0: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98506 bytes_read=74802 bytes_retransmit=9 bytes_invalid=0 send_seq=3357 receive_seq=3357 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001749 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=1771 bytes_read=7409 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998829 adj=49998035  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.8 chamber: temp=19.5 sysload=0.98 cputime=32.868 memavail=701688 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 200.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=98648 bytes_read=75030 bytes_retransmit=9 bytes_invalid=0 send_seq=3362 receive_seq=3362 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001746 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=1777 bytes_read=7425 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998826 adj=49998064  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=27.0 chamber: temp=19.5 sysload=0.98 cputime=32.946 memavail=701960 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 201.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=98722 bytes_read=75277 bytes_retransmit=9 bytes_invalid=0 send_seq=3365 receive_seq=3365 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001741 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=1783 bytes_read=7441 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998826 adj=49998112  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.9 chamber: temp=19.6 sysload=0.90 cputime=33.018 memavail=701408 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 202.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=98728 bytes_read=75485 bytes_retransmit=9 bytes_invalid=0 send_seq=3366 receive_seq=3366 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001738 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000026 bytes_write=1789 bytes_read=7457 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998825 adj=49998187  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.0 chamber: temp=19.5 sysload=0.90 cputime=33.091 memavail=700784 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 203.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=98734 bytes_read=75678 bytes_retransmit=9 bytes_invalid=0 send_seq=3367 receive_seq=3367 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000020 bytes_write=1795 bytes_read=7486 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998824 adj=49998226  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.0 chamber: temp=19.6 sysload=0.90 cputime=33.162 memavail=700928 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 204.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000010 mcu_task_stddev=0.000027 bytes_write=98808 bytes_read=75925 bytes_retransmit=9 bytes_invalid=0 send_seq=3370 receive_seq=3370 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001733 rpi: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000020 bytes_write=1801 bytes_read=7502 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998825 adj=49998243  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=26.8 chamber: temp=19.5 sysload=0.90 cputime=33.233 memavail=700964 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 205.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98882 bytes_read=76158 bytes_retransmit=9 bytes_invalid=0 send_seq=3373 receive_seq=3373 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001730 rpi: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000020 bytes_write=1807 bytes_read=7518 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998827 adj=49998296  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=26.8 chamber: temp=19.6 sysload=0.90 cputime=33.304 memavail=700860 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 206.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98888 bytes_read=76351 bytes_retransmit=9 bytes_invalid=0 send_seq=3374 receive_seq=3374 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001730 rpi: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000020 bytes_write=1813 bytes_read=7534 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998826 adj=49998360  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.0 chamber: temp=19.6 sysload=0.83 cputime=33.372 memavail=700948 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 207.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98894 bytes_read=76588 bytes_retransmit=9 bytes_invalid=0 send_seq=3375 receive_seq=3375 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001726 rpi: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000020 bytes_write=1819 bytes_read=7550 bytes_retransmit=0 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998825 adj=49998332  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.0 chamber: temp=19.5 sysload=0.83 cputime=33.441 memavail=700964 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 208.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=98974 bytes_read=76822 bytes_retransmit=9 bytes_invalid=0 send_seq=3379 receive_seq=3379 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1825 bytes_read=7579 bytes_retransmit=0 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998827 adj=49998337  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.0 chamber: temp=19.5 sysload=0.83 cputime=33.514 memavail=700860 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 209.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=99048 bytes_read=77025 bytes_retransmit=9 bytes_invalid=0 send_seq=3382 receive_seq=3382 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001726 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1831 bytes_read=7595 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998827 adj=49998361  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.7 sysload=0.83 cputime=33.586 memavail=700976 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 210.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=99054 bytes_read=77292 bytes_retransmit=9 bytes_invalid=0 send_seq=3383 receive_seq=3383 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001724 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1837 bytes_read=7611 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998827 adj=49998369  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.1 chamber: temp=19.6 sysload=0.83 cputime=33.659 memavail=700976 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 211.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=99128 bytes_read=77495 bytes_retransmit=9 bytes_invalid=0 send_seq=3386 receive_seq=3386 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001721 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1843 bytes_read=7627 bytes_retransmit=0 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998829 adj=49998376  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.1 chamber: temp=19.3 sysload=0.76 cputime=33.731 memavail=700624 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 212.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=99202 bytes_read=77713 bytes_retransmit=9 bytes_invalid=0 send_seq=3389 receive_seq=3389 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001714 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1849 bytes_read=7643 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998832 adj=49998416  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.7 sysload=0.76 cputime=33.806 memavail=700724 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 213.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=99208 bytes_read=77946 bytes_retransmit=9 bytes_invalid=0 send_seq=3390 receive_seq=3390 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001715 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=1855 bytes_read=7659 bytes_retransmit=0 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998833 adj=49998466  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=35.9 mcu_temp: temp=27.2 chamber: temp=19.5 sysload=0.76 cputime=33.874 memavail=700724 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 214.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000007 mcu_task_stddev=0.000019 bytes_write=99214 bytes_read=78125 bytes_retransmit=9 bytes_invalid=0 send_seq=3391 receive_seq=3391 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001713 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1861 bytes_read=7688 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998836 adj=49998453  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.1 chamber: temp=19.6 sysload=0.76 cputime=33.941 memavail=700436 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 215.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99220 bytes_read=78344 bytes_retransmit=9 bytes_invalid=0 send_seq=3392 receive_seq=3392 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001713 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1867 bytes_read=7704 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998847 adj=49998481  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.1 chamber: temp=19.6 sysload=0.76 cputime=34.010 memavail=700484 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 216.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99226 bytes_read=78581 bytes_retransmit=9 bytes_invalid=0 send_seq=3393 receive_seq=3393 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001712 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1873 bytes_read=7720 bytes_retransmit=0 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998851 adj=49998632  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.5 sysload=0.70 cputime=34.081 memavail=700484 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 217.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99232 bytes_read=78774 bytes_retransmit=9 bytes_invalid=0 send_seq=3394 receive_seq=3394 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001711 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1879 bytes_read=7736 bytes_retransmit=0 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998855 adj=49998616  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.4 chamber: temp=19.5 sysload=0.70 cputime=34.152 memavail=700380 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 218.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99306 bytes_read=79006 bytes_retransmit=9 bytes_invalid=0 send_seq=3397 receive_seq=3397 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001710 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=1885 bytes_read=7752 bytes_retransmit=0 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998859 adj=49998636  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.3 chamber: temp=19.5 sysload=0.70 cputime=34.224 memavail=700484 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 219.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99312 bytes_read=79229 bytes_retransmit=9 bytes_invalid=0 send_seq=3398 receive_seq=3398 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001711 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1891 bytes_read=7781 bytes_retransmit=0 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998863 adj=49998635  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.4 chamber: temp=19.5 sysload=0.70 cputime=34.293 memavail=700484 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 220.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99386 bytes_read=79432 bytes_retransmit=9 bytes_invalid=0 send_seq=3401 receive_seq=3401 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001713 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1897 bytes_read=7797 bytes_retransmit=0 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998867 adj=49998625  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.6 sysload=0.70 cputime=34.362 memavail=700496 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 221.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99460 bytes_read=79694 bytes_retransmit=9 bytes_invalid=0 send_seq=3404 receive_seq=3404 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001718 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1903 bytes_read=7813 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998873 adj=49998621  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.5 sysload=0.64 cputime=34.434 memavail=701260 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 222.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99602 bytes_read=79922 bytes_retransmit=9 bytes_invalid=0 send_seq=3409 receive_seq=3409 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001716 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1909 bytes_read=7829 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998876 adj=49998638  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.6 sysload=0.64 cputime=34.506 memavail=701260 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 223.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99676 bytes_read=80125 bytes_retransmit=9 bytes_invalid=0 send_seq=3412 receive_seq=3412 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001717 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1915 bytes_read=7845 bytes_retransmit=0 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998880 adj=49998632  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.3 chamber: temp=19.6 sysload=0.64 cputime=34.575 memavail=701192 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 224.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99682 bytes_read=80362 bytes_retransmit=9 bytes_invalid=0 send_seq=3413 receive_seq=3413 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001718 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1921 bytes_read=7874 bytes_retransmit=0 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998885 adj=49998634  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=37.0 mcu_temp: temp=27.5 chamber: temp=19.5 sysload=0.64 cputime=34.644 memavail=701272 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 225.1: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=99688 bytes_read=80570 bytes_retransmit=9 bytes_invalid=0 send_seq=3414 receive_seq=3414 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001715 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1927 bytes_read=7890 bytes_retransmit=0 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998889 adj=49998646  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=37.0 mcu_temp: temp=27.5 chamber: temp=19.7 sysload=0.64 cputime=34.711 memavail=701272 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 226.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000008 mcu_task_stddev=0.000021 bytes_write=99694 bytes_read=80778 bytes_retransmit=9 bytes_invalid=0 send_seq=3415 receive_seq=3415 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001718 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1933 bytes_read=7906 bytes_retransmit=0 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49998895 adj=49998660  heater_bed: target=0 temp=19.4 pwm=0.000 raspberry_pi: temp=36.5 mcu_temp: temp=27.2 chamber: temp=19.5 sysload=0.59 cputime=34.780 memavail=701232 print_time=168.146 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/klipper_config/printer.cfg', '-I', '/tmp/printer', '-l', '/home/pi/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.11.0-41-g9b60daf6'
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '2.7.16 (default, Oct 10 2019, 22:02:15) \n[GCC 8.3.0]'
Start printer at Wed Dec 28 10:18:16 2022 (1672240696.4 399.3)
===== Config file =====
[gcode_shell_command hello_world]
command = echo hello world
timeout = 2.
verbose = True

[gcode_macro HELLO_WORLD]
gcode = 
	RUN_SHELL_COMMAND CMD=hello_world

[gcode_macro GET_TIMELAPSE_SETUP]
description = Print the Timelapse setup
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set output_txt = ["Timelapse Setup:"] %}
	{% set _dummy = output_txt.append("enable: %s" % tl.enable) %}
	{% set _dummy = output_txt.append("park: %s" % tl.park.enable) %}
	{% if tl.park.enable %}
	{% set _dummy = output_txt.append("park position: %s time: %s s" % (tl.park.pos, tl.park.time)) %}
	{% set _dummy = output_txt.append("park cord x:%s y:%s dz:%s" % (tl.park.coord.x, tl.park.coord.y, tl.park.coord.dz)) %}
	{% set _dummy = output_txt.append("travel speed: %s mm/s" % tl.speed.travel) %}
	{% endif %}
	{% set _dummy = output_txt.append("fw_retract: %s" % tl.extruder.fw_retract) %}
	{% if not tl.extruder.fw_retract %}
	{% set _dummy = output_txt.append("retract: %s mm speed: %s mm/s" % (tl.extruder.retract, tl.speed.retract)) %}
	{% set _dummy = output_txt.append("extrude: %s mm speed: %s mm/s" % (tl.extruder.extrude, tl.speed.extrude)) %}
	{% endif %}
	{% set _dummy = output_txt.append("verbose: %s" % tl.verbose) %}
	{action_respond_info(output_txt|join("\n"))}

[gcode_macro _SET_TIMELAPSE_SETUP]
description = Set user parameters for timelapse
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	{% set park = {'min'   : {'x': (min.x / 1.42)|round(3) if round_bed else min.x|round(3),
	'y': (min.y / 1.42)|round(3) if round_bed else min.y|round(3)},
	'max'   : {'x': (max.x / 1.42)|round(3) if round_bed else max.x|round(3),
	'y': (max.y / 1.42)|round(3) if round_bed else max.y|round(3)},
	'center': {'x': (max.x-(max.x-min.x)/2)|round(3),
	'y': (max.y-(max.y-min.y)/2)|round(3)}} %}
	{% if params.ENABLE %}
	{% if params.ENABLE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=enable VALUE={True if params.ENABLE|lower == 'true' else False}
	{% else %}
	{action_raise_error("ENABLE=%s not supported. Allowed values are [True, False]" % params.ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.VERBOSE %}
	{% if params.VERBOSE|lower is in ['true', 'false'] %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=verbose VALUE={True if params.VERBOSE|lower == 'true' else False}
	{% else %}
	{action_raise_error("VERBOSE=%s not supported. Allowed values are [True, False]" % params.VERBOSE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_X %}
	{% if params.CUSTOM_POS_X|float >= min.x and params.CUSTOM_POS_X|float <= max.x %}
	{% set _dummy = tl.park.custom.update({'x':params.CUSTOM_POS_X|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_X=%s must be within [%s - %s]" % (params.CUSTOM_POS_X, min.x, max.x))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_Y %}
	{% if params.CUSTOM_POS_Y|float >= min.y and params.CUSTOM_POS_Y|float <= max.y %}
	{% set _dummy = tl.park.custom.update({'y':params.CUSTOM_POS_Y|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_Y=%s must be within [%s - %s]" % (params.CUSTOM_POS_Y, min.y, max.y))}
	{% endif %}
	{% endif %}
	{% if params.CUSTOM_POS_DZ %}
	{% if params.CUSTOM_POS_DZ|float >= min.z and params.CUSTOM_POS_DZ|float <= max.z %}
	{% set _dummy = tl.park.custom.update({'dz':params.CUSTOM_POS_DZ|float|round(3)}) %}
	{% else %}
	{action_raise_error("CUSTOM_POS_DZ=%s must be within [%s - %s]" % (params.CUSTOM_POS_DZ, min.z, max.z))}
	{% endif %}
	{% endif %}
	{% if params.PARK_ENABLE %}
	{% if params.PARK_ENABLE|lower is in ['true', 'false'] %}
	{% set _dummy = tl.park.update({'enable':True if params.PARK_ENABLE|lower == 'true' else False}) %}
	{% else %}
	{action_raise_error("PARK_ENABLE=%s not supported. Allowed values are [True, False]" % params.PARK_ENABLE|capitalize)}
	{% endif %}
	{% endif %}
	{% if params.PARK_POS %}
	{% if params.PARK_POS|lower is in ['center','front_left','front_right','back_left','back_right','custom'] %}
	{% set dic = {'center'     : {'x': park.center.x   , 'y': park.center.y   , 'dz': 1                },
	'front_left' : {'x': park.min.x      , 'y': park.min.y      , 'dz': 0                },
	'front_right': {'x': park.max.x      , 'y': park.min.y      , 'dz': 0                },
	'back_left'  : {'x': park.min.x      , 'y': park.max.y      , 'dz': 0                },
	'back_right' : {'x': park.max.x      , 'y': park.max.y      , 'dz': 0                },
	'custom'     : {'x': tl.park.custom.x, 'y': tl.park.custom.y, 'dz': tl.park.custom.dz}} %}
	{% set _dummy = tl.park.update({'pos':params.PARK_POS|lower}) %}
	{% set _dummy = tl.park.update({'coord':dic[tl.park.pos]}) %}
	{% else %}
	{action_raise_error("PARK_POS=%s not supported. Allowed values are [CENTER, FRONT_LEFT, FRONT_RIGHT, BACK_LEFT, BACK_RIGHT, CUSTOM]"
	% params.PARK_POS|upper)}
	{% endif %}
	{% endif %}
	{% if params.PARK_TIME %}
	{% if params.PARK_TIME|float >= 0.0 %}
	{% set _dummy = tl.park.update({'time':params.PARK_TIME|float|round(3)}) %}
	{% else %}
	{action_raise_error("PARK_TIME=%s must be a positive number" % params.PARK_TIME)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=park VALUE="{tl.park}"
	{% if params.TRAVEL_SPEED %}
	{% if params.TRAVEL_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'travel':params.TRAVEL_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("TRAVEL_SPEED=%s must be larger than 0" % params.TRAVEL_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_SPEED %}
	{% if params.RETRACT_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'retract':params.RETRACT_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_SPEED=%s must be larger than 0" % params.RETRACT_SPEED)}
	{% endif %}
	{% endif %}
	{% if params.EXTRUDE_SPEED %}
	{% if params.EXTRUDE_SPEED|float > 0.0 %}
	{% set _dummy = tl.speed.update({'extrude':params.EXTRUDE_SPEED|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_SPEED=%s must be larger than 0" % params.EXTRUDE_SPEED)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=speed VALUE="{tl.speed}"
	{% if params.EXTRUDE_DISTANCE %}
	{% if params.EXTRUDE_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'extrude':params.EXTRUDE_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("EXTRUDE_DISTANCE=%s must be specified as positiv number" % params.EXTRUDE_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.RETRACT_DISTANCE %}
	{% if params.RETRACT_DISTANCE|float >= 0.0 %}
	{% set _dummy = tl.extruder.update({'retract':params.RETRACT_DISTANCE|float|round(3)}) %}
	{% else %}
	{action_raise_error("RETRACT_DISTANCE=%s must be specified as positiv number" % params.RETRACT_DISTANCE)}
	{% endif %}
	{% endif %}
	{% if params.FW_RETRACT %}
	{% if params.FW_RETRACT|lower is in ['true', 'false'] %}
	{% if 'firmware_retraction' in printer.configfile.settings %}
	{% set _dummy = tl.extruder.update({'fw_retract': True if params.FW_RETRACT|lower == 'true' else False}) %}
	{% else %}
	{% set _dummy = tl.extruder.update({'fw_retract':False}) %}
	{% if params.FW_RETRACT|capitalize == 'True' %}
	{action_raise_error("[firmware_retraction] not defined in printer.cfg. Can not enable fw_retract")}
	{% endif %}
	{% endif %}
	{% else %}
	{action_raise_error("FW_RETRACT=%s not supported. Allowed values are [True, False]" % params.FW_RETRACT|capitalize)}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=extruder VALUE="{tl.extruder}"
	{% if printer.configfile.settings['gcode_macro pause'] is defined %}
	{% set _dummy = tl.macro.update({'pause': printer.configfile.settings['gcode_macro pause'].rename_existing}) %}
	{% endif %}
	{% if printer.configfile.settings['gcode_macro resume'] is defined %}
	{% set _dummy = tl.macro.update({'resume': printer.configfile.settings['gcode_macro resume'].rename_existing}) %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=macro VALUE="{tl.macro}"

[gcode_macro TIMELAPSE_TAKE_FRAME]
description = Take Timelapse shoot
variable_enable = False
variable_takingframe = False
variable_park = {'enable': False,
	'pos'   : 'center',
	'time'  : 0.1,
	'custom': {'x': 0, 'y': 0, 'dz': 0},
	'coord' : {'x': 0, 'y': 0, 'dz': 0}}
variable_extruder = {'fw_retract': False,
	'retract': 1.0,
	'extrude': 1.0}
variable_speed = {'travel': 100,
	'retract': 15,
	'extrude': 15}
variable_verbose = True
variable_restore = {'absolute': {'coordinates': True, 'extrude': True}, 'speed': 1500, 'e':0, 'factor': {'speed': 1.0, 'extrude': 1.0}}
variable_macro = {'pause': 'PAUSE', 'resume': 'RESUME'}
variable_is_paused = False
gcode = 
	{% set hyperlapse = True if params.HYPERLAPSE and params.HYPERLAPSE|lower =='true' else False %}
	{% if enable %}
	{% if (hyperlapse and printer['gcode_macro HYPERLAPSE'].run) or
	(not hyperlapse and not printer['gcode_macro HYPERLAPSE'].run) %}
	{% if park.enable %}
	{% set pos = {'x': park.coord.x, 'y': park.coord.y,
	'z': [printer.gcode_move.gcode_position.z + park.coord.dz, printer.toolhead.axis_maximum.z]|min} %}
	{% set restore = {'absolute': {'coordinates': printer.gcode_move.absolute_coordinates,
	'extrude'    : printer.gcode_move.absolute_extrude},
	'speed'   : printer.gcode_move.speed,
	'e'       : printer.gcode_move.gcode_position.e,
	'factor'  : {'speed'  : printer.gcode_move.speed_factor,
	'extrude': printer.gcode_move.extrude_factor}} %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=restore VALUE="{restore}"
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, minimum extruder temperature not reached!")}{% endif %}
	{% else %}
	{% if extruder.fw_retract %}
	G10
	{% else %}
	M83     ; insure relative extrusion
	G0 E-{extruder.retract} F{speed.retract * 60}
	{% endif %}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=True
	{macro.pause}            ; execute the klipper PAUSE command
	SET_GCODE_OFFSET X=0 Y=0 ; this will insure that the head parks always at the same position in a multi setup
	G90                      ; insure absolute move
	{% if "xyz" not in printer.toolhead.homed_axes %}
	{% if verbose %}{action_respond_info("Timelapse: Warning, axis not homed yet!")}{% endif %}
	{% else %}
	G0 X{pos.x} Y{pos.y} Z{pos.z} F{speed.travel * 60}
	{% endif %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=takingframe VALUE=True
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	M400
	{% endif %}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE={hyperlapse}
	{% endif %}
	{% else %}
	{% if verbose %}{action_respond_info("Timelapse: disabled, take frame ignored")}{% endif %}
	{% endif %}

[gcode_macro _TIMELAPSE_NEW_FRAME]
description = action call for timelapse shoot. must be a seperate macro
gcode = 
	{action_call_remote_method("timelapse_newframe",
	macropark=printer['gcode_macro TIMELAPSE_TAKE_FRAME'].park,
	hyperlapse=params.HYPERLAPSE)}

[delayed_gcode _WAIT_TIMELAPSE_TAKE_FRAME]
gcode = 
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% set factor = {'speed': printer.gcode_move.speed_factor, 'extrude': printer.gcode_move.extrude_factor} %}
	{% if tl.takingframe %}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_TAKE_FRAME DURATION=0.5
	{% else %}
	{tl.macro.resume} VELOCITY={tl.speed.travel} ; execute the klipper RESUME command
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_TAKE_FRAME VARIABLE=is_paused VALUE=False
	{% if not printer[printer.toolhead.extruder].can_extrude %}
	{action_respond_info("Timelapse: Warning minimum extruder temperature not reached!")}
	{% else %}
	{% if tl.extruder.fw_retract %}
	G11
	{% else %}
	G0 E{tl.extruder.extrude} F{tl.speed.extrude * 60}
	G0 F{tl.restore.speed}
	{% if tl.restore.absolute.extrude %}
	M82
	G92 E{tl.restore.e}
	{% endif %}
	{% endif %}
	{% endif %}
	{% if tl.restore.factor.speed   != factor.speed   %} M220 S{(factor.speed*100)|round(0)}   {% endif %}
	{% if tl.restore.factor.extrude != factor.extrude %} M221 S{(factor.extrude*100)|round(0)} {% endif %}
	{% if not tl.restore.absolute.coordinates %} G91 {% endif %}
	{% endif %}

[gcode_macro HYPERLAPSE]
description = Start/Stop a hyperlapse recording
variable_cycle = 0
variable_run = False
gcode = 
	{% set cycle = params.CYCLE|default(30)|int %}
	{% if params.ACTION and params.ACTION|lower == 'start' %}
	{action_respond_info("Hyperlapse: frames started (Cycle %d sec)" % cycle)}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=True
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=cycle VALUE={cycle}
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True
	{% elif params.ACTION and params.ACTION|lower == 'stop' %}
	{% if run %}{action_respond_info("Hyperlapse: frames stopped")}{% endif %}
	SET_GCODE_VARIABLE MACRO=HYPERLAPSE VARIABLE=run VALUE=False
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION=0
	{% else %}
	{action_raise_error("Hyperlapse: No valid input parameter
	Use:
	- HYPERLAPSE ACTION=START [CYCLE=time]
	- HYPERLAPSE ACTION=STOP")}
	{% endif %}

[delayed_gcode _HYPERLAPSE_LOOP]
gcode = 
	UPDATE_DELAYED_GCODE ID=_HYPERLAPSE_LOOP DURATION={printer["gcode_macro HYPERLAPSE"].cycle}
	TIMELAPSE_TAKE_FRAME HYPERLAPSE=True

[gcode_macro TIMELAPSE_RENDER]
description = Render Timelapse video and wait for the result
variable_render = False
variable_run_identifier = 0
gcode = 
	{action_respond_info("Timelapse: Rendering started")}
	{action_call_remote_method("timelapse_render", byrendermacro="True")}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=render VALUE=True
	{printer.configfile.settings['gcode_macro pause'].rename_existing} ; execute the klipper PAUSE command
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5

[delayed_gcode _WAIT_TIMELAPSE_RENDER]
gcode = 
	{% set ri = printer['gcode_macro TIMELAPSE_RENDER'].run_identifier % 4 %}
	SET_GCODE_VARIABLE MACRO=TIMELAPSE_RENDER VARIABLE=run_identifier VALUE={ri + 1}
	{% if printer['gcode_macro TIMELAPSE_RENDER'].render %}
	M117 Rendering {['-','\\','|','/'][ri]}
	UPDATE_DELAYED_GCODE ID=_WAIT_TIMELAPSE_RENDER DURATION=0.5
	{% else %}
	{action_respond_info("Timelapse: Rendering finished")}
	M117
	{printer.configfile.settings['gcode_macro resume'].rename_existing} ; execute the klipper RESUME command
	{% endif %}

[gcode_macro TEST_STREAM_DELAY]
description = Helper macro to find stream and park delay
gcode = 
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set act = printer.toolhead.position %}
	{% set tl = printer['gcode_macro TIMELAPSE_TAKE_FRAME'] %}
	{% if act.z > 5.0 %}
	G0 X{min.x + 5.0} F{tl.speed.travel|int * 60}
	G0 X{(max.x-min.x)/2}
	G4 P{tl.park.time|float * 1000}
	_TIMELAPSE_NEW_FRAME HYPERLAPSE=FALSE
	G0 X{max.x - 5.0}
	{% else %}
	{action_raise_error("Toolhead z %.3f to low. Please place head above z = 5.0" % act.z)}
	{% endif %}

[gcode_macro clean_nozzle]
variable_location_bucket_rear = True
variable_enable_purge = False
variable_purge_len = 10
variable_purge_spd = 150
variable_purge_temp_min = 200
variable_purge_ret = 11
variable_ooze_dwell = 2
variable_brush_top = 0.3
variable_clearance_z = 5
variable_wipe_qty = 3
variable_prep_spd_xy = 3000
variable_prep_spd_z = 300
variable_wipe_spd_xy = 5000
variable_brush_start = 30
variable_brush_width = 45
variable_brush_front = 0
variable_brush_depth = 0
variable_bucket_left_width = 25
variable_bucket_right_width = 25
variable_bucket_gap = 22
variable_bucket_start = 0
variable_bucket_pos = 1
gcode = 
	{% if "xyz" in printer.toolhead.homed_axes %}
	SAVE_GCODE_STATE NAME=clean_nozzle
	G90
	{% set Ry = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% if enable_purge %}
	SET_GCODE_VARIABLE MACRO=clean_nozzle VARIABLE=bucket_pos VALUE={(range(2) | random)}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	{% if location_bucket_rear %}
	G1 Y{Ry} F{prep_spd_xy}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)} F{prep_spd_xy}
	{% endif %}
	G1 X{bucket_start + (bucket_left_width / (2 - bucket_pos)) + (bucket_pos * bucket_gap) + (bucket_pos * (bucket_right_width / 2))}
	{% if printer.extruder.temperature >= purge_temp_min %}
	M83      ; relative mode
	G1 E{purge_len} F{purge_spd}
	G1 E-{purge_ret} F{purge_spd * 5}
	G4 P{ooze_dwell * 1000}
	G92 E0   ; reset extruder
	{% endif %}
	{% endif %}
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{brush_start + (brush_width * bucket_pos)} F{prep_spd_xy}
	{% if location_bucket_rear %}
	G1 Y{Ry}
	{% else %}
	G1 Y{brush_front + (brush_depth / 2)}
	{% endif %}
	G1 Z{brush_top} F{prep_spd_z}
	{% for wipes in range(1, (wipe_qty + 1)) %}
	G1 X{brush_start + (brush_width * (1 - bucket_pos))} F{wipe_spd_xy}
	G1 X{brush_start + (brush_width * bucket_pos)} F{wipe_spd_xy}
	{% endfor %}
	M117 Cleaned!
	G1 Z{brush_top + clearance_z} F{prep_spd_z}
	G1 X{bucket_left_width / 4} F{prep_spd_xy}
	RESTORE_GCODE_STATE NAME=clean_nozzle
	{% else %}
	{ action_raise_error("Please home your axes!") }
	M117 Please home first!
	{% endif %}

[menu __mymain __tune]
type = list
enable = {printer.idle_timeout.state == "Printing"}
name = Tune

[menu __mymain __tune __speed]
type = input
name = Speed: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.speed_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M220 S{'%d' % (menu.input*100)}

[menu __mymain __tune __flow]
type = input
name = Flow: {'%3d' % (menu.input*100)}%
input = {printer.gcode_move.extrude_factor}
input_min = 0
input_max = 2
input_step = 0.01
realtime = True
gcode = 
	M221 S{'%d' % (menu.input*100)}

[menu __mymain __tune __fanspeed]
type = input
enable = {'fan' in printer}
name = Fan speed: {'%3d' % (menu.input*100)}%
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 0.01
gcode = 
	M106 S{'%d' % (menu.input*255)}

[menu __mymain __tune __offsetz]
type = input
name = Offset Z:{'%05.3f' % menu.input}
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __control]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Control

[menu __mymain __control __move_x]
type = list
name = Move X

[menu __mymain __control __move_x __move_10mm]
type = input
name = X(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_1mm]
type = input
name = X(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_x __move_01mm]
type = input
name = X(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.x}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 X{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y]
type = list
name = Move Y

[menu __mymain __control __move_y __move_10mm]
type = input
name = Y(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_1mm]
type = input
name = Y(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_y __move_01mm]
type = input
name = Y(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.y}
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Y{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z]
type = list
name = Move Z

[menu __mymain __control __move_z __move_10mm]
type = input
name = Z(10.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_1mm]
type = input
name = Z(01.0):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_z __move_01mm]
type = input
name = Z(00.1):{'%05.1f' % menu.input}
input = {printer.gcode_move.gcode_position.z}
input_min = 0
input_max = 300
input_step = 0.10
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	G90
	G1 Z{menu.input}
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e]
type = list
name = Move E

[menu __mymain __control __move_e __move_10mm]
type = input
name = E(10.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 10.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E10 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_1mm]
type = input
name = E(01.0):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 1.0
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __move_e __move_01mm]
type = input
name = E(00.1):{'%05.1f' % menu.input}
input = 0
input_min = 0
input_max = 300
input_step = 0.1
realtime = True
gcode = 
	SAVE_GCODE_STATE NAME=__move__axis
	M83
	G1 E0.1 F240
	RESTORE_GCODE_STATE NAME=__move__axis

[menu __mymain __control __home_all]
type = command
name = Home All
gcode = G28

[menu __mymain __control __home_x]
type = command
name = Home X
gcode = G28 X

[menu __mymain __control __home_y]
type = command
name = Home Y
gcode = G28 Y

[menu __mymain __control __home_z]
type = command
name = Home Z
gcode = G28 Z

[menu __mymain __control __disable]
type = command
name = Disable steppers
gcode = 
	M84
	M18

[menu __mymain __control __fanonoff]
type = input
enable = {'fan' in printer}
name = Fan: {'ON ' if menu.input else 'OFF'}
input = {printer.fan.speed}
input_min = 0
input_max = 1
input_step = 1
gcode = 
	M106 S{255 if menu.input else 0}

[menu __mymain __control __G32]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = G32
gcode = G32

[menu __mymain __control __QGL]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = QGL
gcode = QUAD_GANTRY_LEVEL

[menu __mymain __control __parkbed]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Bed
gcode = PARKBED

[menu __mymain __control __parkfront]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front
gcode = PARKFRONT

[menu __mymain __control __parkfrontlow]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Park Front Low
gcode = PARKFRONTLOW

[menu __mymain __control __BEDFANSOFF]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansOff
gcode = BEDFANSOFF

[menu __mymain __control __BEDFANSFAST]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = BedFansFast
gcode = BEDFANSFAST

[menu __mymain __temp]
type = list
name = Temperature

[menu __mymain __temp __hotend0_target]
type = input
enable = {'extruder' in printer}
name = {"Ex0:%3.0f (%4.0f)" % (menu.input, printer.extruder.temperature)}
input = {printer.extruder.target}
input_min = 0
input_max = {printer.configfile.config.extruder.max_temp}
input_step = 1
gcode = M104 T0 S{'%.0f' % menu.input}

[menu __mymain __temp __hotbed_target]
type = input
enable = {'heater_bed' in printer}
name = {"Bed:%3.0f (%4.0f)" % (menu.input, printer.heater_bed.temperature)}
input = {printer.heater_bed.target}
input_min = 0
input_max = {printer.configfile.config.heater_bed.max_temp}
input_step = 1
gcode = M140 S{'%.0f' % menu.input}

[menu __mymain __temp __preheat]
type = list
enable = { not printer.idle_timeout.state == "Printing" }
name = Preheat

[menu __mymain __temp __preheat __preheat_pla]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = PLA - 200/60
gcode = 
	M190 S60
	M104 S200
	{ menu.exit() }

[menu __mymain __temp __cooldown]
type = list
name = Cooldown

[menu __mymain __temp __cooldown __all]
type = command
enable = {('extruder' in printer) and ('heater_bed' in printer)}
name = Cooldown All
gcode = 
	M104 S0
	M140 S0
	{ menu.exit() }

[menu __mymain __temp __cooldown __hotend]
type = command
enable = {'extruder' in printer}
name = Cooldown HE
gcode = M104 S0

[menu __mymain __temp __cooldown __hotbed]
type = command
enable = {'heater_bed' in printer}
name = Cooldown HB
gcode = M140 S0

[menu __mymain __filament]
type = list
name = Filament

[menu __mymain __filament __load]
type = command
name = Load Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	LOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __unload]
type = command
name = Unload Filament
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __filament __feed]
type = input
name = Feed: {'%.1f' % menu.input}
input = 5
input_step = 0.1
gcode = 
	SAVE_GCODE_STATE NAME=__filament__load
	M83
	G1 E{'%.1f' % menu.input} F60
	RESTORE_GCODE_STATE NAME=__filament__load

[menu __mymain __settings]
type = list
enable = {not printer.idle_timeout.state == "Printing"}
name = Settings

[menu __mymain __settings __manual_mbl]
type = list
name = Manual MBL

[menu __mymain __settings __manual_mbl __zpos]
type = command
name = Z-Pos = {'%05.1f' % printer.gcode_move.position.z}

[menu __mymain __settings __manual_mbl __start]
type = command
name = Start Calibration
gcode = 
	G28
	BED_MESH_CALIBRATE METHOD=manual
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __step_down]
type = command
name = Step Down
gcode = 
	TESTZ Z=-.01

[menu __mymain __settings __manual_mbl __step_up]
type = command
name = Step Up
gcode = 
	TESTZ Z=.01

[menu __mymain __settings __manual_mbl __next]
type = command
name = Next
gcode = 
	ACCEPT
	TESTZ Z=-2

[menu __mymain __settings __manual_mbl __save]
type = command
name = Save & Restart
gcode = 
	SAVE_CONFIG
	FIRMWARE_RESTART

[menu __mymain __settings __manual_mbl __abort]
type = command
name = Abort
gcode = 
	ABORT

[menu __mymain __settings __pidtuning]
type = list
name = PID Tuning

[menu __mymain __settings __pidtuning __hotend_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == 'Printing') and ('extruder' in printer)}
name = Tune Hotend PID
gcode = PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1

[menu __mymain __settings __pidtuning __hotbed_pid_tuning]
type = command
enable = {(not printer.idle_timeout.state == "Printing") and ('heater_bed' in printer)}
name = Tune Hotbed PID
gcode = PID_CALIBRATE HEATER=heater_bed TARGET=60 WRITE_FILE=1

[menu __mymain __settings __pidtuning __save_config]
type = command
name = Save config
gcode = SAVE_CONFIG

[menu __mymain __settings __dump]
type = command
name = Dump Parameters
gcode = 
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{ action_respond_info("printer['%s'].%s = %s" % (name1, name2, printer[name1][name2])) }
	{% else %}
	{ action_respond_info("printer['%s'] = %s" % (name1, printer[name1])) }
	{% endfor %}
	{% endfor %}

[menu __mymain __settings __firmware_restart]
type = command
name = FW Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = FIRMWARE_RESTART

[menu __mymain __settings __host_restart]
type = command
name = Host Restart
enable = {printer.idle_timeout.state == "Idle"}
gcode = RESTART

[display]
menu_timeout = 60
menu_root = __mymain
display_group = __voron_display
lcd_type = uc1701
cs_pin = EXP1_3
a0_pin = EXP1_4
rst_pin = EXP1_5
encoder_pins = ^EXP2_5, ^EXP2_3
click_pin = ^!EXP1_2
contrast = 63
spi_software_miso_pin = EXP2_1
spi_software_mosi_pin = EXP2_6
spi_software_sclk_pin = EXP2_2

[menu __mymain]
type = list
name = Main Menu

[menu __mymain __babystep]
type = input
name = Babystep Z:{'%05.3f' % menu.input}
enable = { printer.idle_timeout.state == "Printing" }
input = {printer.gcode_move.homing_origin.z}
input_min = -5
input_max = 5
input_step = 0.005
realtime = True
gcode = 
	SET_GCODE_OFFSET Z={'%.3f' % menu.input} MOVE=1

[menu __mymain __printstart]
type = command
enable = {('virtual_sdcard' in printer) and not printer.print_stats.filename == "" and printer.idle_timeout.state == "Idle"}
name = Start Printing
gcode = 
	M24
	{ menu.exit() }

[menu __mymain __printpause]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Pause
gcode = 
	PAUSE
	{ menu.exit() }

[menu __mymain __printresume]
type = command
enable = { printer.idle_timeout.state == "Printing" }
name = Resume
gcode = 
	RESUME
	{ menu.exit() }

[menu __mymain __printcancel]
type = command
enable = { printer.pause_resume.is_paused == true }
name = Cancel
gcode = 
	CANCEL_PRINT
	{ menu.exit() }

[menu __mymain __sdcard]
type = vsdlist
enable = {('virtual_sdcard' in printer) and printer.print_stats.filename == ""}
name = SD Card

[menu __mymain __filament __clean]
type = command
name = Clean Nozzle
gcode = 
	clean_nozzle

[menu __mymain __cooldown]
type = command
name = Cooldown
gcode = COOLDOWN

[menu __mymain __lightsoff]
type = command
name = Lights Off
gcode = light_off

[menu __mymain __lightsdim]
type = command
name = Lights Dim
gcode = light_dim

[menu __mymain __lightson]
type = command
name = Lights On
gcode = light_on

[menu __mymain __shutdown]
type = command
enable = {not printer.idle_timeout.state == "Printing"}
name = Shut down
gcode = SHUTDOWN

[delayed_gcode _menu_pi_shutdown]
gcode = 
	{action_emergency_stop("Shutdown from menu")}
	{action_call_remote_method("shutdown_machine")}

[menu __main __octoprint]
type = disabled

[menu __main __setup __calib __delta_calib_auto]
type = disabled

[menu __main __setup __calib __delta_calib_man]
type = disabled

[gcode_macro G32]
gcode = 
	SAVE_GCODE_STATE NAME=STATE_G32
	BED_MESH_CLEAR
	G90
	CG28
	Z_TILT_ADJUST
	PARKBED
	RESTORE_GCODE_STATE NAME=STATE_G32

[gcode_macro CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro XYCG28]
gcode = 
	{% if "xy" not in printer.toolhead.homed_axes %}
	G28 X Y
	{% endif %}

[gcode_macro ZCG28]
gcode = 
	{% if "z" not in printer.toolhead.homed_axes %}
	G28 Z
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	{% set s = params.S|float %}
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}  ; Set hotend temp
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}   ; Wait for hotend temp (within 1 degree)
	{% endif %}

[gcode_macro CALIBRATE_Z]
rename_existing = _BASE_CALIBRATE_Z
description = Perform the Z calibration using the physical Z endstop and the Klicky
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set mesh_ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% set mesh_center = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_center %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if V %}
	{ action_respond_info("Z Offset calibration") }
	{% endif %}
	M117 Z-Calibration..
	ATTACH_PROBE
	G1 X125 Y125 F8000
	{% if mesh_ready %}
	RESPOND MSG="Z calibration: a mesh is computed and ready, probing mesh center: {mesh_center}"
	_BASE_CALIBRATE_Z BED_POSITION={mesh_center}
	{% else %}
	RESPOND MSG="Z calibration: no mesh computed, probing default point"
	_BASE_CALIBRATE_Z
	{% endif %}
	DOCK_PROBE

[respond]

[gcode_macro SHUTDOWN]
gcode = 
	LCDRGB R=0 G=0 B=0                               ; Turn off LCD neopixels (see above for this macro)
	COOLDOWN                                              ; Shortcut to turn everything off (see above for this macro)
	{action_respond_info('action:poweroff')}          ; OctoPrint compatible host shutdown
	{action_call_remote_method("shutdown_machine")}   ; Moonraker compatible host shutdown

[gcode_macro REBOOT]
gcode = 
	{action_call_remote_method("reboot_machine")}

[gcode_macro _bot_data]
variable_lapse_video_size = 0
variable_lapse_filename = 'None'
variable_lapse_path = 'None'
gcode = 
	M118 Setting bot lapse variables

[gcode_shell_command backup_cfg]
command = sh /home/pi/klipper_config/scripts/myshellscript.sh
timeout = 30.
verbose = True

[gcode_macro BACKUP_CFG]
gcode = 
	RUN_SHELL_COMMAND CMD=backup_cfg

[gcode_macro COOLDOWN]
description = Shuts down the printer
gcode = 
	M84
	TURN_OFF_HEATERS
	M117
	LIGHT_OFF

[gcode_macro RESETSPEEDS]
gcode = 
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity}
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY={printer.configfile.settings.printer.square_corner_velocity}

[gcode_macro BEEP]
gcode = 
	{% set i = params.I|default(1)|int %}           ; Iterations (number of times to beep).
	{% set dur = params.DUR|default(100)|int %}     ; Duration/wait of each beep in ms. Default 100ms.
	{% set freq = params.FREQ|default(2000)|int %}  ; Frequency in Hz. Default 2kHz.
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[delayed_gcode _CLEAR_DISPLAY]
gcode = 
	M117

[delayed_gcode _DELAY_SDCARD_RESET_FILE]
gcode = 
	SDCARD_RESET_FILE

[gcode_macro DIRECT_MOVE]
gcode = 
	{% set out_param = ["G0"] %}
	{% set _dummy = out_param.append("X%s" % params.X) if params.X %}
	{% set _dummy = out_param.append("Y%s" % params.Y) if params.Y %}
	{% set _dummy = out_param.append("Z%s" % params.Z) if params.Z %}
	{% set _dummy = out_param.append("E%s" % params.E) if params.E %}
	{% set _dummy = out_param.append("F%s" % params.F) if params.F %}
	{out_param|join(" ")}

[gcode_macro _PRINT_AR]
description = Helper: Action response
gcode = 
	{% if params.SHOW_LCD|default('false') == 'true' %} M117 {params.T} {% endif %}
	{action_respond_info(params.T)}

[gcode_macro M115]
description = Print host and mcu version
rename_existing = M115.1
gcode = 
	{% set out = ['mcu build version:'] %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% if name2 is in ['mcu_version'] %}
	{% set _dummy = out.append("%s: %s" % (name1, printer[name1][name2])) %}
	{% endif %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(out|join("\n"))}
	M115.1

[gcode_shell_command plot_graph]
command = bash /home/pi/klipper_config/scripts/plot_graphs.sh
timeout = 300.0
verbose = True

[gcode_macro bedfanvars]
variable_threshold = 100
variable_fast = 0.4
variable_slow = 0.3
gcode = 

[fan_generic BedFans]
pin = PD14
kick_start_time = 0.5

[gcode_macro BedFansSlow]
gcode = 
	{% set SLOW = printer["gcode_macro bedfanvars"].slow|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={SLOW}

[gcode_macro BedFansFast]
gcode = 
	{% set FAST = printer["gcode_macro bedfanvars"].fast|float %}
	SET_FAN_SPEED FAN=BedFans SPEED={FAST}

[gcode_macro BedFansOff]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro SET_HEATER_TEMPERATURE]
rename_existing = _SET_HEATER_TEMPERATURE
gcode = 
	{% set HEATER = params.HEATER|default("None") %}
	{% set TARGET = params.TARGET|default(0)|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if HEATER|lower == "extruder" %}
	M104 S{TARGET}
	{% elif HEATER|lower == "heater_bed" %}
	M99140 S{TARGET}
	{% else %}
	{action_respond_info("Heater %s not supported" % HEATER)}
	{% endif %}
	{% if HEATER|lower == "heater_bed" %}
	{% if TARGET >= THRESHOLD %}
	BedFansSlow
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=1
	{% else %}
	BedFansOff
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=0
	{% endif %}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	{% set S = params.S|int %}
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if S >= THRESHOLD %}
	BedFansSlow
	{% else %}
	BedFansOff
	{% endif %}
	M140 {% for p in params
	%}{'%s%s' % (p, params[p])}{%
	endfor %}
	{% if S != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={S|int} MAXIMUM={S|int + 5}
	{% endif %}
	{% if S >= THRESHOLD %}
	BedFansFast
	{% endif %}

[gcode_macro M140]
rename_existing = M99140
gcode = 
	{% set S = params.S|float %}
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET={S}

[gcode_macro TURN_OFF_HEATERS]
rename_existing = _TURN_OFF_HEATERS
gcode = 
	BedFansOff
	_TURN_OFF_HEATERS

[delayed_gcode bedfanloop]
gcode = 
	{% set THRESHOLD = printer["gcode_macro bedfanvars"].threshold|int %}
	{% if printer.heater_bed.target >= THRESHOLD %}
	{% if printer.heater_bed.temperature|int >= (printer.heater_bed.target|int - 1) %}
	BedFansFast
	{% else %}
	UPDATE_DELAYED_GCODE ID=bedfanloop DURATION=5
	{% endif %}
	{% endif %}

[display_glyph chamber]
data = 
	................
	****************
	*....*....*....*
	*....*....*....*
	*....******....*
	*..............*
	*..............*
	*.....****.....*
	*.***.*..*.***.*
	*.....****.....*
	*......**......*
	*..............*
	*.************.*
	*...*......*...*
	****************
	................

[display_glyph voron]
data = 
	.......**.......
	.....******.....
	....********....
	..************..
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	.**..**..******.
	.******..**..**.
	.*****..**..***.
	.****..**..****.
	.***..**..*****.
	..************..
	....********....
	.....******.....
	.......**.......

[display_template _vheater_temperature]
param_heater_name = "extruder"
text = 
	{% if param_heater_name in printer %}
	{% set heater = printer[param_heater_name] %}
	{% if param_heater_name == "heater_bed" %}
	{% if heater.target %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~bed_heat{frame}~
	{% else %}
	~bed~
	{% endif %}
	{% else %}
	~extruder~
	{% endif %}
	{ "%3.0f" % (heater.temperature,) }
	{% if heater.target and (heater.temperature - heater.target)|abs > 2 %}
	~right_arrow~
	{ "%0.0f" % (heater.target,) }
	{% endif %}
	~degrees~
	{% endif %}

[display_data __voron_display extruder]
position = 0, 0
text = { render("_vheater_temperature", param_heater_name="extruder") }

[display_data __voron_display fan]
position = 0, 10
text = 
	{% if 'fan' in printer %}
	{% set speed = printer.fan.speed %}
	{% if speed %}
	{% set frame = (printer.toolhead.estimated_print_time|int % 2) + 1 %}
	~fan{frame}~
	{% else %}
	~fan1~
	{% endif %}
	{ "{:>4.0%}".format(speed) }
	{% endif %}

[display_data __voron_display bed]
position = 1, 0
text = { render("_vheater_temperature", param_heater_name="heater_bed") }

[display_data __voron_display progress_text]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ "{:^6.0%}".format(progress) }

[display_data __voron_display progress_text2]
position = 1, 10
text = 
	{% set progress = printer.display_status.progress %}
	{ draw_progress_bar(1, 10, 6, progress) }

[display_data __voron_display printing_time]
position = 2, 10
text = 
	{% set ptime = printer.idle_timeout.printing_time %}
	{ "%02d:%02d" % (ptime // (60 * 60), (ptime // 60) % 60) }

[display_data __voron_display chamber]
position = 2, 0
text = 
	{% set chamber = printer['temperature_sensor chamber'] %}
	~chamber~
	{ "%3.0f" % (chamber.temperature,) }
	~degrees~

[display_data __voron_display print_status]
position = 3, 0
text = 
	{% if printer.display_status.message %}
	{ printer.display_status.message }
	{% elif printer.idle_timeout.printing_time %}
	{% set pos = printer.toolhead.position %}
	{ "X%-4.0fY%-4.0fZ%-5.2f" % (pos.x, pos.y, pos.z) }
	{% else %}
	{ "VT.430 " }
	~voron~
	{% endif %}

[z_calibration]
nozzle_xy_position = 143,256
switch_xy_position = 136,235
bed_xy_position = 125,125
switch_offset = .52
max_deviation = 1.0
speed = 200
probing_first_fast = true
start_gcode = Dock_Probe_Unlock
before_switch_gcode = Attach_Probe
end_gcode = Dock_probe

[gcode_macro _User_Variables]
variable_verbose = True
variable_debug = False
variable_travel_speed = 300
variable_move_accel = 10000
variable_dock_speed = 50
variable_release_speed = 75
variable_z_drop_speed = 20
variable_safe_z = 25
variable_enable_z_hop = True
variable_max_bed_y = 257
variable_max_bed_x = 250
variable_z_endstop_x = 143
variable_z_endstop_y = 256
variable_docklocation_x = 181
variable_docklocation_y = 251
variable_docklocation_z = -128
variable_enable_dock_servo = False
variable_servo_name = 'NAME'
variable_servo_deploy = 10
variable_servo_retract = 11
variable_servo_delay = 1000
variable_dockmove_x = 40
variable_dockmove_y = 0
variable_dockmove_z = 0
variable_attachmove_x = 0
variable_attachmove_y = 30
variable_attachmove_z = 0
variable_umbilical = False
variable_umbilical_x = 15
variable_umbilical_y = 15
variable_park_toolhead = False
variable_parkposition_x = 125
variable_parkposition_y = 125
variable_parkposition_z = 30
variable_version = 1
variable_attachmove2_x = 0
variable_attachmove2_y = 0
variable_attachmove2_z = 0
variable_home_backoff = 10
variable_override_homing = ''
gcode = 
	{% set Mx = printer['configfile'].config["stepper_x"]["position_max"]|float %}
	{% set My = printer['configfile'].config["stepper_y"]["position_max"]|float %}
	{% set Ox = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set Oy = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% set Oz = printer['configfile'].config["probe"]["z_offset"]|float %}
	{% if z_endstop_x != 0 or z_endstop_y != 0 %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ z_endstop_x }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ z_endstop_y }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_x VALUE={ (Mx * 0.5) - Ox }
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=z_endstop_y VALUE={ (My * 0.5) - Oy }
	{% endif %}

[gcode_macro _Probe_Variables]
variable_probe_attached = False
variable_probe_state = False
variable_probe_lock = False
variable_z_endstop_x = 0
variable_z_endstop_y = 0
gcode = 

[gcode_macro _klicky_check_variables_version]
gcode = 
	{% set version = printer["gcode_macro _User_Variables"].version|default(0) %}
	{% if version != 1 %}
	{ action_raise_error("Please update your klicky variables, there are some functionality changes") }
	{% endif %}

[gcode_macro _KlickyDebug]
gcode = 
	{% set message  = params.MSG %}
	{% set debug = printer["gcode_macro _User_Variables"].debug|default(False) %}
	{% if debug %}
	{ action_respond_info(message) }
	{% endif %}

[gcode_macro _exit_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move  = params.MOVE|default(0) %}
	{% set speed = printer["gcode_macro _User_Variables"].travel_speed %}
	M400
	SET_VELOCITY_LIMIT ACCEL={printer.configfile.settings.printer.max_accel}
	SET_VELOCITY_LIMIT ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	RESTORE_GCODE_STATE NAME={function} MOVE={move} MOVE_SPEED={speed}

[gcode_macro _entry_point]
gcode = 
	{% set function  = 'pre_' ~ params.FUNCTION %}
	{% set move_accel = printer["gcode_macro _User_Variables"].move_accel|default(1000) %}
	M400
	SAVE_GCODE_STATE NAME={function}
	SET_GCODE_OFFSET Z=0
	G90
	SET_VELOCITY_LIMIT ACCEL={move_accel}

[gcode_macro _Homing_Variables]
gcode = 
	{% set reset  = params.RESET|default(0) %}
	{% if reset %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }
	{% endif %}

[gcode_macro Attach_Probe_Lock]
description = Attaches Klicky Probe, can only be docked after unlocking
gcode = 
	Attach_Probe
	_Probe_Lock

[gcode_macro Dock_Probe_Unlock]
description = Docks Klicky Probe even if it was locked
gcode = 
	_Probe_Unlock
	Dock_Probe

[gcode_macro _Probe_Unlock]
description = Unlocks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to False"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ False }

[gcode_macro _Probe_Lock]
description = Locks Klicky Probe state
gcode = 
	_KlickyDebug msg="_Probe_Lock setting probe_lock variable to True"
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_lock VALUE={ True }

[gcode_macro _DeployKlickyDock]
description = Deploys Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_deploy = printer["gcode_macro _User_Variables"].servo_deploy|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_DeployKlickyDock Klicky servo configuration enabled"
	{% if servo_deploy == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo deploy angle specified") }
	{% endif %}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_deploy|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_DeployKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _DeployDock"] is defined %}
	_KlickyDebug msg="_DeployKlickyDock calling _DeployDock"
	_DeployDock
	{% endif %}

[gcode_macro _RetractKlickyDock]
description = Retracts Klicky servo-controlled dock
gcode = 
	{% set enable_dock_servo = printer["gcode_macro _User_Variables"].enable_dock_servo|default(False) %}
	{% set servo_delay = printer["gcode_macro _User_Variables"].servo_delay|default(1000) %}
	{% set servo_name = printer["gcode_macro _User_Variables"].servo_name %}
	{% set servo_retract = printer["gcode_macro _User_Variables"].servo_retract|default(360) %}
	M400
	{% if enable_dock_servo != False %}
	_KlickyDebug msg="_RetractKlickyDock Klicky servo configuration enabled"
	{% if servo_retract == 360 %}
	{ action_raise_error("Klicky: servo active on klicky-variables, but no servo retract angle specified") }
	{% endif %}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}"
	SET_SERVO SERVO={servo_name|string} ANGLE={servo_retract|int}
	M400
	G4 P{servo_delay|int}
	_KlickyDebug msg="_RetractKlickyDock SET_SERVO SERVO={servo_name|string} WIDTH=0"
	SET_SERVO SERVO={servo_name|string} WIDTH=0
	{% elif printer["gcode_macro _RetractDock"] is defined %}
	_KlickyDebug msg="_RetractKlickyDock calling _RetractDock"
	_RetractDock
	{% endif %}

[gcode_macro Attach_Probe]
description = Attaches Klicky Probe
gcode = 
	{% set goback  = params.BACK|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set attachmove2_x = printer["gcode_macro _User_Variables"].attachmove2_x|default(0) %}
	{% set attachmove2_y = printer["gcode_macro _User_Variables"].attachmove2_y|default(0) %}
	{% set attachmove2_z = printer["gcode_macro _User_Variables"].attachmove2_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	_entry_point function=Attach_Probe
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	_KlickyDebug msg="Attach_Probe Axis homed"
	{% elif not probe_attached and not probe_lock %}
	_KlickyDebug msg="Attach_Probe going to attach probe"
	{% if verbose %}
	{ action_respond_info("Attaching Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% if not enable_z_hop %}
	_KlickyDebug msg="Attach_Probe z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero, duplicate?") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe toolhead too low, raising it by {safe_z}mm, duplicate?"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_entry_point function=Attach_Probe_intern
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove_y|int - attachmove2_y} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int - attachmove2_z|int} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}"
	G0 X{docklocation_x|int - attachmove2_x|int} Y{docklocation_y|int - attachmove2_y} F{dock_feedrate}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{z_drop_feedrate}
	{% endif %}
	_KlickyDebug msg="Attach_Probe moving from the dock to G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Attach_Probe moving to a safe Z position: G0 Z{safe_z} F{z_drop_feedrate}"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	_CheckProbe action=attach
	_exit_point function=Attach_Probe_intern move={goback}
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe locked not attaching probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already attached!") }
	{% endif %}
	_KlickyDebug msg="Attach_Probe probe already attached, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Attach_Probe

[gcode_macro Dock_Probe]
description = Docks Klicky Probe
gcode = 
	{% set goback  = params.back|default(0) %}
	{% set probe_attached = printer["gcode_macro _Probe_Variables"].probe_attached %}
	{% set probe_lock = printer["gcode_macro _Probe_Variables"].probe_lock %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set dockmove_x = printer["gcode_macro _User_Variables"].dockmove_x|default(0) %}
	{% set dockmove_y = printer["gcode_macro _User_Variables"].dockmove_y|default(0) %}
	{% set dockmove_z = printer["gcode_macro _User_Variables"].dockmove_z|default(0) %}
	{% set docklocation_x = printer["gcode_macro _User_Variables"].docklocation_x %}
	{% set docklocation_y = printer["gcode_macro _User_Variables"].docklocation_y %}
	{% set docklocation_z = printer["gcode_macro _User_Variables"].docklocation_z %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set dock_feedrate = printer["gcode_macro _User_Variables"].dock_speed * 60 %}
	{% set release_feedrate = printer["gcode_macro _User_Variables"].release_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe Axis homed"
	_entry_point function=Dock_Probe
	{% if probe_attached and not probe_lock %}
	_KlickyDebug msg="Dock_Probe going to dock probe"
	{% if verbose %}
	{ action_respond_info("Docking Probe") }
	{% endif %}
	_KLICKY_STATUS_BUSY
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Umbilical_Path
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}"
	G0 X{docklocation_x|int - attachmove_x|int} Y{docklocation_y|int - attachmove_y|int} F{travel_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving near the dock with G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}"
	G0 Z{docklocation_z|int - attachmove_z|int} F{dock_feedrate}
	{% endif %}
	_DeployKlickyDock
	_KlickyDebug msg="Dock_Probe moving to the dock with G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}"
	G0 X{docklocation_x} Y{docklocation_y} F{dock_feedrate}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Attach_Probe moving to the dock with G0 Z{docklocation_z} F{dock_feedrate}"
	G0 Z{docklocation_z} F{dock_feedrate}
	{% endif %}
	{% if docklocation_z != -128 %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}"
	G0 Z{docklocation_z|int + dockmove_z|int} F{release_feedrate}
	{% endif %}
	_KlickyDebug msg="Dock_Probe moving from the dock to G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int} Y{docklocation_y|int + dockmove_y|int} F{release_feedrate}
	_RetractKlickyDock
	_KlickyDebug msg="Dock_Probe moving away from the dock to G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}"
	G0 X{docklocation_x|int + dockmove_x|int - attachmove_x|int} Y{docklocation_y|int + dockmove_y|int - attachmove_y|int} F{release_feedrate}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="Dock_Probe toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_Park_Toolhead
	G4 P1000
	_CheckProbe action=dock
	_KLICKY_STATUS_READY
	{% elif probe_lock %}
	{% if verbose %}
	{ action_respond_info("Probe locked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe locked not docking probe"
	_CheckProbe action=query
	{% else %}
	{% if verbose %}
	{ action_respond_info("Probe already docked") }
	{% endif %}
	_KlickyDebug msg="Dock_Probe probe already docked, doing nothing"
	_CheckProbe action=query
	{% endif %}
	_exit_point function=Dock_Probe move={goback}

[gcode_macro PROBE_CALIBRATE]
rename_existing = _PROBE_CALIBRATE
description = Calibrate the probes z_offset with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_calibrate Axis homed"
	_KlickyDebug msg="probe_calibrate Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_CALIBRATE with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	G90
	Attach_Probe back=1
	_KLICKY_STATUS_CALIBRATING_Z
	_KlickyDebug msg="probe_calibrate calling klipper probe_calibrate"
	_PROBE_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	M118 moving the toolhead 20 mm from the bed
	_KlickyDebug msg="probe_calibrate Moving Z up by 20mm"
	TESTZ Z=20
	M118 remove manually the probe and continue calibration
	_KLICKY_STATUS_READY

[gcode_macro PROBE_ACCURACY]
rename_existing = _PROBE_ACCURACY
description = Probe Z-height accuracy at current XY position with klicky automount
gcode = 
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set max_x = printer["gcode_macro _User_Variables"].max_bed_x|float %}
	{% set max_y = printer["gcode_macro _User_Variables"].max_bed_y|float %}
	{% set probe_offset_x = printer['configfile'].config["probe"]["x_offset"]|float %}
	{% set probe_offset_y = printer['configfile'].config["probe"]["y_offset"]|float %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X, Y and Z Axis First!") }
	{% endif %}
	_KlickyDebug msg="probe_accuracy Axis homed"
	_KlickyDebug msg="probe_accuracy Variables max_x={max_x},max_y={max_y},probe_offset_x={probe_offset_x},probe_offset_y={probe_offset_y}"
	_entry_point function=PROBE_ACCURACY
	{% if printer['gcode_move'].position.y > (max_y - probe_offset_y)
	or printer['gcode_move'].position.y < - probe_offset_y
	or printer['gcode_move'].position.x > (max_x - probe_offset_x)
	or printer['gcode_move'].position.x < - probe_offset_x %}
	{ action_raise_error("Must perform PROBE_ACCURACY with the probe above the BED, check klicky_variables bed size!") }
	{% endif%}
	_CheckProbe action=query
	Attach_Probe back=1
	_KlickyDebug msg="probe_accuracy calling klipper probe accuracy"
	_PROBE_ACCURACY {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe back=1
	_exit_point function=PROBE_ACCURACY move=1

[force_move]
enable_force_move = True

[homing_override]
axes = xyz
gcode = 
	_User_Variables
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z %}
	{% set enable_z_hop = printer["gcode_macro _User_Variables"].enable_z_hop %}
	{% set attachmove_x = printer["gcode_macro _User_Variables"].attachmove_x|default(0) %}
	{% set attachmove_y = printer["gcode_macro _User_Variables"].attachmove_y|default(0) %}
	{% set attachmove_z = printer["gcode_macro _User_Variables"].attachmove_z|default(0) %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set home_backoff = printer["gcode_macro _User_Variables"].home_backoff|default(0) %}
	{% set override_homing = printer["gcode_macro _User_Variables"].override_homing|default('') %}
	_klicky_check_variables_version
	_CheckProbe action=query
	{% set home_x, home_y, home_z, leave_probe_attached = False, False, False, False %}
	{% if 'PROBE_LOCK' in params%}
	{% if verbose %}
	{ action_respond_info("PROBE_LOCK = True") }
	{% endif %}
	{% set leave_probe_attached = True %}
	{% endif %}
	{% if not 'X' in params
	and not 'Y' in params
	and not 'Z' in params %}
	{% set home_x, home_y, home_z = True, True, True %}
	_KlickyDebug msg="homing_override goint to home all axes"
	{% else %}
	{% if 'X' in params %}
	{% set home_x = True %}
	_KlickyDebug msg="homing_override goint to home X"
	{% endif %}
	{% if 'Y' in params %}
	{% set home_y = True %}
	_KlickyDebug msg="homing_override goint to home Y"
	{% endif %}
	{% if 'Z' in params %}
	{% set home_z = True %}
	_KlickyDebug msg="homing_override goint to home Z"
	{% endif %}
	{% if 'X' in params
	and 'Y' in params
	and 'Z' in params %}
	_Homing_Variables reset=1
	_KlickyDebug msg="homing_override goint to home all axes"
	{% endif %}
	{% endif %}
	_entry_point function=homing_override
	_KLICKY_STATUS_HOMING
	{% if 'z' not in printer.toolhead.homed_axes %}
	{% if not enable_z_hop %}
	_KlickyDebug msg="homing_override z_hop disabled"
	{% set safe_z = 0 %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if 'z' in printer.toolhead.homed_axes %}
	{% if printer.toolhead.position.z < safe_z %}
	_KlickyDebug msg="homing_override toolhead too low, raising it to {safe_z}mm"
	{% if verbose %}
	{ action_respond_info("moving to a safe Z distance") }
	{% endif %}
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	{% else %}
	{% if verbose %}
	{ action_respond_info("Z not homed, forcing full G28") }
	{% endif %}
	_KlickyDebug msg="homing_override Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION X=0 Y=0 Z=0
	_KlickyDebug msg="homing_override toolhead too low, raising it by {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% set home_x, home_y, home_z = True, True, True %}
	{% endif %}
	{% endif %}
	{% if ((attachmove_y == 0 and override_homing == '' ) or (override_homing == 'Y'))%}
	{% if home_y %}
	{% if override_homing == 'Y' %}
	_KlickyDebug msg="homing_override Y homing first override, due to override_homing = Y"
	{% else %}
	_KlickyDebug msg="homing_override Y homing first override, due to attachmove_y = 0"
	{% endif %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop-home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% set home_y = False %}
	{% endif %}
	{% if home_x %}
	{% if verbose %}
	{ action_respond_info("Homing X") }
	{% endif %}
	{% if printer["gcode_macro _HOME_X"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_X
	{% else %}
	_KlickyDebug msg="homing_override Homing X G28 X0"
	G28 X0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_x.position_endstop > (printer.configfile.settings.stepper_x.position_min|default(0) + printer.configfile.settings.stepper_x.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 X{printer.configfile.settings.stepper_x.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off X endstop, G0 X{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_x.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_y %}
	{% if verbose %}
	{ action_respond_info("Homing Y") }
	{% endif %}
	{% if printer["gcode_macro _HOME_Y"] is defined %}
	_KlickyDebug ("homing_override calling _HOME_Y external script to handle the Y homing")
	_HOME_Y
	{% else %}
	_KlickyDebug msg="homing_override Homing Y G28 Y0"
	G28 Y0
	{% if home_backoff != 0 %}
	{% if (printer.configfile.settings.stepper_y.position_endstop > (printer.configfile.settings.stepper_y.position_min|default(0) + printer.configfile.settings.stepper_y.position_max)/2) %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop - home_backoff|int} F{travel_feedrate}
	{% else %}
	_KlickyDebug msg="homing_override backing off Y endstop, G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}"
	G0 Y{printer.configfile.settings.stepper_y.position_endstop + home_backoff|int} F{travel_feedrate}
	{%endif %}
	{%endif %}
	{% endif %}
	{% endif %}
	{% if home_z %}
	{% if verbose %}
	{ action_respond_info("Homing Z") }
	{% endif %}
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe configured as a virtual Z endstop attaching probe"
	Attach_Probe
	{% if leave_probe_attached %}
	_Probe_Lock
	{% endif %}
	{% else %}
	Dock_Probe
	{% endif %}
	_Home_Z
	{% if printer['configfile'].config["stepper_z"]["endstop_pin"] == 'probe:z_virtual_endstop' %}
	_KlickyDebug msg="homing_override probe no longer required, docking probe"
	Dock_Probe
	{% endif %}
	{% endif %}
	_CheckProbe action=query
	_Park_Toolhead
	_exit_point function=homing_override
	_KLICKY_STATUS_READY

[gcode_macro _Umbilical_Path]
gcode = 
	{% set umbilical = printer["gcode_macro _User_Variables"].umbilical %}
	{% set umbilical_x = printer["gcode_macro _User_Variables"].umbilical_x %}
	{% set umbilical_y = printer["gcode_macro _User_Variables"].umbilical_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% if umbilical %}
	_entry_point function=Umbilical_Path
	_KlickyDebug msg="_Umbilical_Path moving to G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}"
	G0 X{umbilical_x} Y{umbilical_y} Z{safe_z} F{travel_feedrate}
	_exit_point function=Umbilical_Path
	{% endif %}

[gcode_macro _Home_Z]
gcode = 
	{% set z_endstop_x = printer["gcode_macro _Probe_Variables"].z_endstop_x %}
	{% set z_endstop_y = printer["gcode_macro _Probe_Variables"].z_endstop_y %}
	{% set safe_z = printer["gcode_macro _User_Variables"].safe_z|float %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set z_drop_feedrate = printer["gcode_macro _User_Variables"].z_drop_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Home_Z
	{% if not 'xy' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home X and Y Axis First!") }
	{% else %}
	_KlickyDebug msg="_Home_Z Axis homed"
	{% if not 'z' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Resetting Z position to zero") }
	{% endif %}
	_KlickyDebug msg="_Home_Z Z not homed, setting position as X=Y=Z=0"
	SET_KINEMATIC_POSITION Z=0
	{% endif %}
	_KlickyDebug msg="_Home_Z moving to Z endstop position G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}"
	G0 X{z_endstop_x} Y{z_endstop_y} F{travel_feedrate}
	_KlickyDebug msg="_Home_Z Homing Z G28 Z"
	G28 Z0
	_KlickyDebug msg="_Home_Z toolhead too low, raising it to {safe_z}mm"
	G0 Z{safe_z} F{z_drop_feedrate}
	{% endif %}
	_exit_point function=Home_Z

[gcode_macro _CheckProbe]
variable_probe_state = 0
gcode = 
	Query_Probe
	_SetProbeState action={ params.ACTION }

[gcode_macro _SetProbeState]
gcode = 
	{% set query_probe_triggered = printer.probe.last_query %}
	{% set action  = params.ACTION|default('') %}
	{% if query_probe_triggered %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ False }
	{% else %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_attached VALUE={ True }
	{% endif %}
	{% if action == 'query' %}
	SET_GCODE_VARIABLE MACRO=_Probe_Variables VARIABLE=probe_state VALUE={ query_probe_triggered }
	{% endif %}
	{% if not query_probe_triggered and action == 'dock' %}
	{ action_raise_error("Probe dock failed!") }
	{% endif %}
	{% if query_probe_triggered and action == 'attach' %}
	{ action_raise_error("Probe attach failed!") }
	{% endif %}

[gcode_macro _Park_Toolhead]
gcode = 
	{% set park_toolhead = printer["gcode_macro _User_Variables"].park_toolhead %}
	{% set parkposition_x = printer["gcode_macro _User_Variables"].parkposition_x %}
	{% set parkposition_y = printer["gcode_macro _User_Variables"].parkposition_y %}
	{% set parkposition_z = printer["gcode_macro _User_Variables"].parkposition_z %}
	{% set travel_feedrate = printer["gcode_macro _User_Variables"].travel_speed * 60 %}
	{% set verbose = printer["gcode_macro _User_Variables"].verbose %}
	_entry_point function=Park_Toolhead
	{% if park_toolhead and 'xyz' in printer.toolhead.homed_axes %}
	{% if verbose %}
	{ action_respond_info("Parking Toolhead") }
	{% endif %}
	_KlickyDebug msg="_Park_Toolhead moving to G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}"
	G0 X{parkposition_x} Y{parkposition_y} Z{parkposition_z} F{travel_feedrate}
	{% endif %}
	_exit_point function=Park_Toolhead

[gcode_macro _klicky_status_ready]
gcode = 
	{% if printer['gcode_macro status_ready'] is defined %}
	_KlickyDebug msg="_klicky_status_ready activating the LED STATUS_READY"
	STATUS_READY
	{% endif %}

[gcode_macro _klicky_status_busy]
gcode = 
	{% if printer['gcode_macro status_busy'] is defined %}
	_KlickyDebug msg="_klicky_status_busy activating the LED STATUS_BUSY"
	STATUS_BUSY
	{% endif %}

[gcode_macro _klicky_status_leveling]
gcode = 
	{% if printer['gcode_macro status_leveling'] is defined %}
	_KlickyDebug msg="_klicky_status_leveling activating the LED STATUS_LEVELING"
	STATUS_LEVELING
	{% endif %}

[gcode_macro _klicky_status_homing]
gcode = 
	{% if printer['gcode_macro status_homing'] is defined %}
	_KlickyDebug msg="_klicky_status_homing activating the LED STATUS_HOMING"
	STATUS_HOMING
	{% endif %}

[gcode_macro _klicky_status_cleaning]
gcode = 
	{% if printer['gcode_macro status_cleaning'] is defined %}
	_KlickyDebug msg="_klicky_status_cleaning activating the LED STATUS_CLEANING"
	STATUS_CLEANING
	{% endif %}

[gcode_macro _klicky_status_meshing]
gcode = 
	{% if printer['gcode_macro status_meshing'] is defined %}
	_KlickyDebug msg="_klicky_status_meshing activating the LED STATUS_MESHING"
	STATUS_MESHING
	{% endif %}

[gcode_macro _klicky_status_calibrating_z]
gcode = 
	{% if printer['gcode_macro status_calibrating_z'] is defined %}
	_KlickyDebug msg="_klicky_status_calibrating_z activating the LED STATUS_CALIBRATING_Z"
	STATUS_CALIBRATING_Z
	{% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
description = Perform Mesh Bed Leveling with klicky automount
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Bed Mesh Calibrate") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_MESHING
	_BED_MESH_CALIBRATE {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe

[gcode_macro Z_TILT_ADJUST]
rename_existing = _Z_TILT_ADJUST
description = 
gcode = 
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	{ action_respond_info("Z Tilt Adjust") }
	{% endif %}
	_CheckProbe action=query
	G90
	Attach_Probe
	_KLICKY_STATUS_LEVELING
	_Z_TILT_ADJUST {% for p in params
	%}{'%s=%s ' % (p, params[p])}{%
	endfor %}
	Dock_Probe
	G28 Z0

[gcode_macro HEATSOAK_CHAMBER]
description = Heatsoak chamber to a specific temperature with a timeout
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set MAXTIME = params.MAXTIME|default(15)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% for _ in range(1, MAXTIME) %}
	_WAIT_CHAMBER_TEMP TEMP={SETPOINT_TEMP}
	{% endfor %}
	{% if V %}
	RESPOND MSG="Chamber temperature OK !"
	{% endif %}

[gcode_macro _WAIT_CHAMBER_TEMP]
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|float %}
	{% set CURRENT_TEMP = printer["temperature_sensor chamber"].temperature|float %}
	{% if CURRENT_TEMP <= SETPOINT_TEMP %}
	RESPOND MSG="Heating up the chamber : {CURRENT_TEMP}/{SETPOINT_TEMP}"
	G4 P{60000 * 1}
	{% endif %}

[gcode_macro HEATSOAK_BED]
description = Heatsoak bed at specified temperature and wait for a specific amount of time
gcode = 
	{% set SETPOINT_TEMP = params.TEMP|default(0)|int %}
	{% set TIME = params.SOAKTIME|default(8)|int %}
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% if V %}
	RESPOND MSG="Heating up bed..."
	{% endif %}
	M190 S{SETPOINT_TEMP}
	{% if TIME > 0 %}
	{% for _ in range(1, TIME) %}
	RESPOND MSG="Heatsoak..."
	G4 P{60000 * 1}
	{% endfor %}
	{% else %}
	RESPOND MSG="No heatsoak needed, continue"
	{% endif %}
	{% if V %}
	RESPOND MSG="Bed temperature OK"
	{% endif %}

[heater_fan hotend_fan]
pin = PA8
max_power = 1.0
kick_start_time = 0.5
heater = extruder
heater_temp = 50.0

[fan]
pin = PE5
kick_start_time = 0.5
off_below = 0.10

[controller_fan controller_fan]
pin = PD12
kick_start_time = 0.5
heater = heater_bed
max_power = 0.4

[fan_generic exhaust_fan]
pin = PD13
kick_start_time = 5.0

[gcode_macro _LOW_TEMP_CHECK]
description = Check the nozzle is at temperature and heat it if needed
gcode = 
	{% set T = params.T|default(230)|float %}
	{% if printer.extruder.target != 0 %}
	{% if printer.extruder.temperature < printer.extruder.target %}
	M109 S{printer.extruder.target|float}
	{% endif %}
	{% else %}
	{% if printer.extruder.target < T %}
	M109 S{T}
	{% endif %}
	{% endif %}

[gcode_macro CHANGE_FILAMENT]
description = Do a PAUSE, park the toolhead over the purge bucket and unload the filament
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=CHANGE_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	PAUSE
	PARKFRONTLOW
	TIP_SHAPING
	UNLOAD_FILAMENT
	RESTORE_GCODE_STATE NAME=CHANGE_FILAMENT_state

[gcode_macro UNLOAD_FILAMENT]
description = Basic unload of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=UNLOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G1 E-20 F3600
	G4 P3000
	G1 E{DISTANCE|float * -1} F3000
	RESTORE_GCODE_STATE NAME=UNLOAD_FILAMENT_state

[gcode_macro LOAD_FILAMENT]
description = Basic load of the filament (used with M600/CHANGE_FILAMENT)
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	{% set DISTANCE = params.DISTANCE|default(105)|float %}
	M400
	SAVE_GCODE_STATE NAME=LOAD_FILAMENT_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M83
	G92 E0
	G1 E{DISTANCE|float} F200
	G1 E50 F150
	G92 E0
	RESTORE_GCODE_STATE NAME=LOAD_FILAMENT_state

[gcode_macro TIP_SHAPING]
description = Filament tip shaping sequence
gcode = 
	{% set TEMP = params.TEMP|default(230)|float %}
	SAVE_GCODE_STATE NAME=TIP_SHAPING_state
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	_LOW_TEMP_CHECK T={TEMP}
	M82
	G92 E0
	G1 E2 F3600
	G1 E0 F3600
	G1 E3 F3600
	G1 E0 F3600
	G1 E4 F3600
	G1 E0 F3600
	RESTORE_GCODE_STATE NAME=TIP_SHAPING_state

[gcode_macro PRINT_START]
description = Machine heatup procedure before starting a print
gcode = 
	{% set BED_TEMP = params.BED|int %}
	{% set EXTRUDER_TEMP = params.HOTEND|int %}
	{% set SOAK = params.SOAK|default(0)|int %}
	{% set CHAMBER_TEMP = params.CHAMBER|default(0)|int %}
	{% set CHAMBER_MAXTIME = params.CHAMBER_MAXTIME|default(20)|int %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	{% set FL_SIZE = params.SIZE|default("0_0_0_0")|string %}
	_User_Variables
	{% set V = printer["gcode_macro _User_Variables"].verbose %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	CLEAR_PAUSE
	BED_MESH_CLEAR
	G90
	M83
	LIGHT_ON
	M117 Homing                 ; display message
	status_homing
	G28
	PARKBED
	M117 Bed Soak
	status_heating
	{% if (SOAK > 0) and (printer.heater_bed.target < (BED_TEMP - 8)) %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME={SOAK}
	{% else %}
	{% if CHAMBER_TEMP > 0 %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	{% endif %}
	HEATSOAK_BED TEMP={BED_TEMP} SOAKTIME=0
	{% endif %}
	M117 Chamber Soak
	status_heating
	{% if CHAMBER_TEMP > 0 %}
	M109 S{EXTRUDER_TEMP - 50}
	HEATSOAK_CHAMBER TEMP={CHAMBER_TEMP} MAXTIME={CHAMBER_MAXTIME}
	{% endif %}
	M117 Extruder heating
	status_heating
	{% if V %}
	RESPOND MSG="Extruder temperature OK"
	{% endif %}
	G1 X15 Y250 Z20 F6000
	M109 S{EXTRUDER_TEMP}
	G4 P{60000 * 0.5}
	CLEAN_NOZZLE
	M117 Tilt..
	status_leveling
	{% if V %}
	RESPOND MSG="TILT..."
	{% endif %}
	Z_TILT_ADJUST
	M117 Nozzle cleaning
	status_cleaning
	CLEAN_NOZZLE
	CLEAN_NOZZLE
	{% if V %}
	RESPOND MSG="Auto Z calibration..."
	{% endif %}
	M117 Auto Z Cal
	status_calibrating_z
	ATTACH_PROBE_LOCK
	COMPUTE_MESH_PARAMETERS SIZE={FL_SIZE}
	CALIBRATE_Z
	M117 Adaptive Bed Mesh
	{% if V %}
	RESPOND MSG="Bed mesh measurement..."
	{% endif %}
	status_meshing
	ADAPTIVE_BED_MESH SIZE={FL_SIZE}
	DOCK_PROBE_UNLOCK
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "PLA" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "PETG" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.0750
	SET_GCODE_OFFSET Z_ADJUST=0.010 MOVE=1
	{% elif MATERIAL == "ABS" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.04
	{% elif MATERIAL == "FLEX" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "PC" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% elif MATERIAL == "NYLON" %}
	SET_PRESSURE_ADVANCE ADVANCE=0.07
	{% endif %}
	M117 Printing...
	status_printing
	{% if V %}
	RESPOND MSG="Start printing !"
	{% endif %}
	G92 E0;
	G90
	G0 X5 Y5 F6000
	G0 Z0.4
	G91
	G1 X120 E30 F600;
	G1 Y1
	G1 X-120 E30 F600;
	G92 E0;
	G90
	G1 Z2.0 E-0.2 F600 ;move the platform down 15mm
	G92 E0 ;zero the extruded length again
	G1 Z5 F600
	G92 E0
	LIGHT_ON S=25
	status_printing
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1

[gcode_macro PRINT_END]
gcode = 
	{% set FILTER_TIME = params.FILTER_TIME|default(600)|int %}
	{% set th = printer.toolhead %}
	{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
	{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
	{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
	{% set MATERIAL = params.MATERIAL|default("XXX")|string %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	M117 Done!
	status_ready
	SAVE_GCODE_STATE NAME=STATE_PRINT_END
	M400                           ; wait for buffer to clear
	{% if printer.extruder.temperature > 120 %}
	G92 E0                         ; zero the extruder
	G1 E-12.0 F1800                 ; retract filament
	{% endif %}
	TURN_OFF_HEATERS
	G90                                      ; absolute positioning
	G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
	G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
	M107                                     ; turn off fan
	M84
	BED_MESH_CLEAR
	RESETSPEEDS
	LIGHT_OFF
	_SD_PRINT_STATS
	RESPOND MSG="Material: {MATERIAL}"
	{% if MATERIAL == "ABS" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "PC" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% elif MATERIAL == "NYLON" %}
	SET_FAN_SPEED FAN=BedFans SPEED=1
	UPDATE_DELAYED_GCODE ID=_STOP_FILTER DURATION={FILTER_TIME}
	{% endif %}
	RESTORE_GCODE_STATE NAME=STATE_PRINT_END

[delayed_gcode _STOP_FILTER]
gcode = 
	SET_FAN_SPEED FAN=BedFans SPEED=0

[gcode_macro _ADAPTIVE_MESH_VARIABLES]
variable_ready = False
variable_do_mesh = False
variable_do_nominal = False
variable_mesh_min = 0,0
variable_mesh_max = 0,0
variable_mesh_center = 0,0
variable_probe_count = 0,0
variable_rri = 0
variable_algo = "bicubic"
gcode = 

[gcode_macro COMPUTE_MESH_PARAMETERS]
description = Compute the mesh parameters and store them for later use
gcode = 
	{% set xMinConf, yMinConf = printer["configfile"].config["bed_mesh"]["mesh_min"].split(',')|map('trim')|map('int') %}
	{% set xMaxConf, yMaxConf = printer["configfile"].config["bed_mesh"]["mesh_max"].split(',')|map('trim')|map('int') %}
	{% set xProbeCntConf, yProbeCntConf = printer["configfile"].config["bed_mesh"]["probe_count"].split(',')|map('trim')|map('int') %}
	{% set algo = printer["configfile"].config["bed_mesh"]["algorithm"]|lower %}
	{% set xMeshPPS, yMeshPPS = printer["configfile"].config["bed_mesh"]["mesh_pps"].split(',')|map('trim')|map('int') %}
	{% if params.SIZE is defined and params.SIZE != "0_0_0_0" %}
	{% set xMinSpec, yMinSpec, xMaxSpec, yMaxSpec = params.SIZE.split('_')|map('trim')|map('int') %}
	{% set margin = params.MARGIN|default(5)|int %}
	{% set xMin = [xMinConf, (xMinSpec - margin)]|max %}
	{% set xMax = [xMaxConf, (xMaxSpec + margin)]|min %}
	{% set yMin = [yMinConf, (yMinSpec - margin)]|max %}
	{% set yMax = [yMaxConf, (yMaxSpec + margin)]|min %}
	{% set xProbeCnt = ((xMax - xMin) * xProbeCntConf / (xMaxConf - xMinConf))|round(0, 'ceil')|int %}
	{% set yProbeCnt = ((yMax - yMin) * yProbeCntConf / (yMaxConf - yMinConf))|round(0, 'ceil')|int %}
	{% if xProbeCnt < 3 and yProbeCnt < 3 %}
	RESPOND MSG="Computed mesh parameters: none, bed mesh not needed"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={False}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% else %}
	{% set xProbeCnt = [3, xProbeCnt]|max %}
	{% set yProbeCnt = [3, yProbeCnt]|max %}
	{% if xProbeCnt % 2 == 0 %}
	{% set xProbeCnt = xProbeCnt + 1 %}
	{% endif %}
	{% if yProbeCnt % 2 == 0 %}
	{% set yProbeCnt = yProbeCnt + 1 %}
	{% endif %}
	{% if xMeshPPS != 0 or yMeshPPS != 0 %}
	{% set probeCntMin = [xProbeCnt, yProbeCnt]|min %}
	{% set probeCntMax = [xProbeCnt, yProbeCnt]|max %}
	{% if algo == "lagrange" and probeCntMax > 6 %}
	{% set algo = "bicubic" %}
	{% endif %}
	{% if algo == "bicubic" and probeCntMin < 4 %}
	{% if probeCntMax > 6 %}
	{% if xProbeCnt > yProbeCnt %}
	{% set yProbeCnt = 5 %}
	{% else %}
	{% set xProbeCnt = 5 %}
	{% endif %}
	{% else %}
	{% set algo = "lagrange" %}
	{% endif %}
	{% endif %}
	{% endif %}
	{% set rRefIndex = (((xProbeCnt * yProbeCnt) - 1) / 2)|int %}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_min = "%d,%d"|format(xMin, yMin) %}
	{% set mesh_max = "%d,%d"|format(xMax, yMax) %}
	{% set probe_count = "%d,%d"|format(xProbeCnt, yProbeCnt) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	RESPOND MSG="Computed mesh parameters: MESH_MIN={mesh_min} MESH_MAX={mesh_max} MESH_CENTER={mesh_center} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={False}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_min VALUE='"{mesh_min}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_max VALUE='"{mesh_max}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=probe_count VALUE='"{probe_count}"'
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=rri VALUE={rRefIndex}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=algo VALUE='"{algo}"'
	{% endif %}
	{% else %}
	RESPOND MSG="Computed mesh parameters: none, going for a nominal bed mesh"
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_mesh VALUE={True}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=do_nominal VALUE={True}
	{% set xCenter = xMin + ((xMax - xMin) / 2) %}
	{% set yCenter = yMin + ((yMax - yMin) / 2) %}
	{% set mesh_center = "%d,%d"|format(xCenter, yCenter) %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=mesh_center VALUE='"{mesh_center}"'
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={True}

[gcode_macro ADAPTIVE_BED_MESH]
description = Perform a bed mesh, but only where and when it's needed
gcode = 
	{% set ready = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].ready %}
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if ready %}
	_DO_ADAPTIVE_MESH
	{% else %}
	RESPOND MSG="Adaptive bed mesh: parameters not computed, automatically calling the COMPUTE_MESH_PARAMETERS macro prior to the mesh"
	COMPUTE_MESH_PARAMETERS {rawparams}
	M400
	_DO_ADAPTIVE_MESH
	{% endif %}

[gcode_macro _DO_ADAPTIVE_MESH]
gcode = 
	{% set do_mesh = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_mesh %}
	{% set do_nominal = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].do_nominal %}
	{% set mesh_min = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_min %}
	{% set mesh_max = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].mesh_max %}
	{% set probe_count = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].probe_count %}
	{% set rRefIndex = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].rri %}
	{% set algo = printer["gcode_macro _ADAPTIVE_MESH_VARIABLES"].algo %}
	{% if do_mesh %}
	{% if do_nominal %}
	RESPOND MSG="Adaptive bed mesh: nominal bed mesh"
	BED_MESH_CALIBRATE
	{% else %}
	RESPOND MSG="Adaptive bed mesh: MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}"
	BED_MESH_CALIBRATE MESH_MIN={mesh_min} MESH_MAX={mesh_max} PROBE_COUNT={probe_count} RELATIVE_REFERENCE_INDEX={rRefIndex} ALGORITHM={algo}
	{% endif %}
	{% else %}
	RESPOND MSG="Adaptive bed mesh: no mesh to be done"
	{% endif %}
	SET_GCODE_VARIABLE MACRO=_ADAPTIVE_MESH_VARIABLES VARIABLE=ready VALUE={False}

[gcode_macro SEARCH_VARS]
description = Search for variables in the "printer" object from Klipper
gcode = 
	{% set search = params.S|lower %}
	{% set ns = namespace() %}
	{% for item in printer  %}
	{% if ' ' in item %}
	{% set ns.path = ['printer', "['%s']" % (item), ''] %}
	{% else %}
	{% set ns.path = ['printer.', item, ''] %}
	{% endif %}
	{% if search in ns.path|lower %}
	{ action_respond_info(ns.path|join) }
	{% endif %}
	{% if printer[item].items() %}
	{% for childkey, child in printer[item].items() recursive %}
	{% set ns.path = ns.path[:loop.depth|int + 1] %}
	{% if ' ' in childkey %}
	{% set null = ns.path.append("['%s']" % (childkey)) %}
	{% else %}
	{% set null = ns.path.append(".%s" % (childkey)) %}
	{% endif %}
	{% if child is mapping  %}
	{ loop(child.items()) }
	{% else %}
	{% if search in ns.path|lower %}
	{ action_respond_info("%s : %s" % (ns.path|join, child)) }
	{% endif %}
	{% endif %}
	{% endfor %}
	{% endif %}
	{% endfor %}

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	{% set TYPE = params.TYPE|default("")|string %}
	{% set BED_TEMP = params.BED_TEMP|default(110)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(240)|float %}
	{% set MATERIAL = params.MATERIAL|default("ABS")|string %}
	{% if TYPE=="" %}
	{action_respond_info("Please call this macro using TYPE= \"flow\" or \"pressure_advance\"")}
	{action_raise_error("not enough parameters to start a calibration!")}
	{% elif TYPE=="flow" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=130_130_170_170
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	{% elif TYPE=="pressure_advance" %}
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} MATERIAL={MATERIAL} SOAK=1 SIZE=90_90_210_210
	PRESSURE_ADVANCE_CALIBRATION
	{% endif %}
	END_PRINT FILTER_TIME=0

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(0.93)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	M221 S{e_multiplier * 100}
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	G90
	M106 S{fan_speed * 255 / 100}
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	{% for perim_num in range(number_of_perimeters) %}
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	{% set do_raft = params.RAFT|default(1)|int %}
	{% set print_size      = params.SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	{% set fast_line_ratio_percent = 50 %}
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band - spacing_purge %}
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting Pressure Advance calibration print.")}
	{action_respond_info("")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button once the print starts exhibiting PA values that are obviously too high.")}
	{action_respond_info("")}
	{action_respond_info("PA of first band: %.4f" % pa_start)}
	{action_respond_info("PA of last band: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA increment per band: %.4f" % pa_increment)}
	{action_respond_info("Number of bands: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Inspect the printed model. "
	"Look at the top and bottom lines in each band, on the right side of the two vertical raft bars (where the print speeds change). "
	"Find the highest band from the bottom where the lines at its top still resemble the lines at its bottom, with no visible extrusion width irregularities. "
	"Your final Pressure Advance value would then be:"
	)}
	{action_respond_info("")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Update your [extruder] config section and set \"pressure_advance\" to the value you calculated.")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	{% for curr_band_num in range(1, num_bands + 1) %}
	{% set outer_loop = loop %}
	{% set curr_pa_value = pa_start + (curr_band_num - 1) * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro M486]
gcode = 
	{% if 'exclude_object' not in printer %}
	{action_raise_error("[exclude_object] is not enabled")}
	{% endif %}
	{% if 'T' in params %}
	EXCLUDE_OBJECT RESET=1
	{% for i in range(params.T | int) %}
	EXCLUDE_OBJECT_DEFINE NAME={i}
	{% endfor %}
	{% endif %}
	{% if 'C' in params %}
	EXCLUDE_OBJECT CURRENT=1
	{% endif %}
	{% if 'P' in params %}
	EXCLUDE_OBJECT NAME={params.P}
	{% endif %}
	{% if 'S' in params %}
	{% if params.S == '-1' %}
	{% if printer.exclude_object.current_object %}
	EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
	{% endif %}
	{% else %}
	EXCLUDE_OBJECT_START NAME={params.S}
	{% endif %}
	{% endif %}
	{% if 'U' in params %}
	EXCLUDE_OBJECT RESET=1 NAME={params.U}
	{% endif %}

[gcode_macro M701]
gcode = 
	LOAD_FILAMENT

[gcode_macro M702]
gcode = 
	UNLOAD_FILAMENT

[gcode_macro M125]
gcode = 
	PARK

[gcode_macro M900]
gcode = 
	{% set pa = params.K|float %}
	SET_PRESSURE_ADVANCE ADVANCE={pa}

[gcode_macro M204]
description = Set and limit acceleration to cfg value
rename_existing = M204.1
gcode = 
	{% set accel = params.S|float                      if 'S' in params and params.S|float > 0
	else [params.P|float,params.T|float]|min if 'P' in params and 'T' in params and
	params.P|float > 0 and params.T|float > 0 %}
	{% if accel is defined %}
	{% set lim_accel          = [accel,     printer.configfile.settings.printer.max_accel         ]|min %}
	{% set lim_accel_to_decel = [accel / 2, printer.configfile.settings.printer.max_accel_to_decel]|min %}
	SET_VELOCITY_LIMIT ACCEL={lim_accel} ACCEL_TO_DECEL={lim_accel_to_decel}
	{% else %}
	{action_respond_info("Invalid M204 command \"M204 %s\"" % rawparams)}
	{% endif %}

[gcode_macro M117]
rename_existing = M117.1
gcode = 
	{% if rawparams %}
	{% set escaped_msg = rawparams.split(';', 1)[0].split('\x23', 1)[0]|replace('"', '\\"') %}
	SET_DISPLAY_TEXT MSG="{escaped_msg}"
	RESPOND TYPE=command MSG="{escaped_msg}"
	{% else %}
	SET_DISPLAY_TEXT
	{% endif %}

[sdcard_loop]

[gcode_macro M808]
gcode = 
	{% if params.K is not defined and params.L is defined %}SDCARD_LOOP_BEGIN COUNT={params.L|int}{% endif %}
	{% if params.K is not defined and params.L is not defined %}SDCARD_LOOP_END{% endif %}
	{% if params.K is defined and params.L is not defined %}SDCARD_LOOP_DESIST{% endif %}

[neopixel sb_leds]
pin = PB0
chain_count = 3
color_order = GRBW
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
initial_white = 0.0

[gcode_macro _sb_vars]
variable_colors = {
	'logo': {
	'busy': {'r': 0.4, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cleaning': {'r': 0.0, 'g': 0.02, 'b': 0.5, 'w': 0.0},
	'calibrating_z': {'r': 0.8, 'g': 0., 'b': 0.35, 'w': 0.0},
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'homing': {'r': 0.0, 'g': 0.6, 'b': 0.2, 'w': 0.0},
	'leveling': {'r': 0.5, 'g': 0.1, 'b': 0.4, 'w': 0.0},
	'meshing': {'r': 0.2, 'g': 1.0, 'b': 0.0, 'w': 0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'printing': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w': 0.0},
	},
	'nozzle': {
	'heating': {'r': 0.5, 'g': 0.0, 'b': 0.0, 'w':0.0},
	'off': {'r': 0.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'on': {'r': 0.8, 'g': 0.8, 'b': 0.8, 'w':1.0},
	'standby': {'r': 0.5, 'g': 0.0, 'b': 0.5, 'w':0.0},
	},
	'thermal': {
	'hot': {'r': 1.0, 'g': 0.0, 'b': 0.0, 'w': 0.0},
	'cold': {'r': 0.3, 'g': 0.0, 'b': 0.3, 'w': 0.0}
	}
	}
variable_logo_led_name = "sb_leds"
variable_logo_idx = "1"
variable_nozzle_led_name = "sb_leds"
variable_nozzle_idx = "2,3"
gcode = 

[gcode_macro _set_sb_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = params.LED|string %}
	{% set idx = (params.IDX|string).split(',') %}
	{% set transmit_last = params.TRANSMIT|default(1) %}
	{% for led_index in idx %}
	{% set transmit=transmit_last if loop.last else 0 %}
	set_led led={led} red={red} green={green} blue={blue} white={white} index={led_index} transmit={transmit}
	{% endfor %}

[gcode_macro _set_sb_leds_by_name]
gcode = 
	{% set leds_name = params.LEDS %}
	{% set color_name = params.COLOR %}
	{% set color = printer["gcode_macro _sb_vars"].colors[leds_name][color_name] %}
	{% set led = printer["gcode_macro _sb_vars"][leds_name + "_led_name"] %}
	{% set idx = printer["gcode_macro _sb_vars"][leds_name + "_idx"] %}
	{% set transmit = params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={color.r} green={color.g} blue={color.b} white={color.w} idx="{idx}" transmit={transmit}

[gcode_macro _set_logo_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].logo_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].logo_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro _set_nozzle_leds]
gcode = 
	{% set red = params.RED|default(0)|float %}
	{% set green = params.GREEN|default(0)|float %}
	{% set blue = params.BLUE|default(0)|float %}
	{% set white = params.WHITE|default(0)|float %}
	{% set led = printer["gcode_macro _sb_vars"].nozzle_led_name %}
	{% set idx = printer["gcode_macro _sb_vars"].nozzle_idx %}
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds led={led} red={red} green={green} blue={blue} white={white} idx="{idx}" transmit={transmit}

[gcode_macro set_logo_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_logo_leds red=0 blue=0 green=0 white=0 transmit={transmit}

[gcode_macro set_nozzle_leds_on]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="on" transmit={transmit}

[gcode_macro set_nozzle_leds_off]
gcode = 
	{% set transmit=params.TRANSMIT|default(1) %}
	_set_sb_leds_by_name leds="nozzle" color="off" transmit={transmit}

[gcode_macro status_off]
gcode = 
	set_logo_leds_off transmit=0
	set_nozzle_leds_off

[gcode_macro status_ready]
gcode = 
	_set_sb_leds_by_name leds="logo" color="standby" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="standby" transmit=1

[gcode_macro status_busy]
gcode = 
	_set_sb_leds_by_name leds="logo" color="busy" transmit=0
	set_nozzle_leds_on

[gcode_macro status_heating]
gcode = 
	_set_sb_leds_by_name leds="logo" color="heating" transmit=0
	_set_sb_leds_by_name leds="nozzle" color="heating" transmit=1

[gcode_macro status_leveling]
gcode = 
	_set_sb_leds_by_name leds="logo" color="leveling" transmit=0
	set_nozzle_leds_on

[gcode_macro status_homing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="homing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_cleaning]
gcode = 
	_set_sb_leds_by_name leds="logo" color="cleaning" transmit=0
	set_nozzle_leds_on

[gcode_macro status_meshing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="meshing" transmit=0
	set_nozzle_leds_on

[gcode_macro status_calibrating_z]
gcode = 
	_set_sb_leds_by_name leds="logo" color="calibrating_z" transmit=0
	set_nozzle_leds_on

[gcode_macro status_printing]
gcode = 
	_set_sb_leds_by_name leds="logo" color="printing" transmit=0
	set_nozzle_leds_on

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[filament_motion_sensor filament_sensor]
detection_length = 14.00
extruder = extruder
switch_pin = ^PG12
pause_on_runout = True
event_delay = 3.0
pause_delay = 0.5
insert_gcode = 
	M117 Insert Detected
runout_gcode = 
	M117 Runout Detected
	LCDRGB R=1 G=0 B=0
	BEEP I=12

[gcode_macro M600]
gcode = 
	LCDRGB R=0 G=1 B=0  ; Turn LCD green
	PAUSE                ; Pause

[pause_resume]

[display_status]

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set z = params.Z|default(10)|int %}                                                   ; z hop amount
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}                              ; set z hop variable for reference in resume macro
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}    ; set hotend temp variable for reference in resume macro
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0                                  ; disable filament sensor
	SAVE_GCODE_STATE NAME=PAUSE                                                          ; save current print position for resume
	BASE_PAUSE                                                                           ; pause print
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}       ; check that zhop doesn't exceed z max
	G91                                                                              ; relative positioning
	G1 Z{z} F900                                                                     ; raise Z up by z hop amount
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }                  ; if z max is exceeded, show message and set zhop value for resume to 0
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90                                                                                  ; absolute positioning
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000   ; park toolhead at front center
	SAVE_GCODE_STATE NAME=PAUSEPARK                                                      ; save parked position in case toolhead is moved during the pause (otherwise the return zhop can error)
	M104 S0                                                                              ; turn off hotend
	SET_IDLE_TIMEOUT TIMEOUT=43200                                                       ; set timeout to 12 hours
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	{% set e = params.E|default(2.5)|int %}
	{% if printer['pause_resume'].is_paused|int == 1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=1                          ; enable filament sensor
	RESETRGB                                                                    ; reset LCD color
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}  ; set timeout back to configured value
	{% if etemp > 0 %}
	M109 S{etemp|int}                                                        ; wait for hotend to heat back up
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100                     ; go back to parked position in case toolhead was moved during pause (otherwise the return zhop can error)
	G91                                                                          ; relative positioning
	M83                                                                          ; relative extruder positioning
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900                                                ; prime nozzle by E, lower Z back down
	{% else %}
	G1 Z{zhop * -1} F900                                                     ; lower Z back down without priming (just in case we are testing the macro with cold hotend)
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60                          ; restore position
	BASE_RESUME                                                                  ; resume print
	{% endif %}

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout} ; set timeout back to configured value
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT
	RESETSPEEDS

[gcode_macro RESONANCES_TEST]
description = Run input shaper test
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	_CG28
	TURN_OFF_HEATERS
	M107
	{% if user.hw.chamber.fan %} M141 {% endif %}
	{% if user.hw.filter.ena %} _SET_FILTER {% endif %}
	_PRINT_AR T="INPUT SHAPER: Noise values, check if sensor is installed"
	MEASURE_AXES_NOISE
	_PRINT_AR T="INPUT SHAPER: Resonance Tests starting ..."
	TEST_RESONANCES AXIS=X
	TEST_RESONANCES AXIS=Y
	_PRINT_AR T="INPUT SHAPER: Resonance Tests done"
	_PRINT_AR T="INPUT SHAPER: Generate graph in backround"
	RUN_SHELL_COMMAND CMD=plot_graph

[gcode_macro DUMP_PARAMETERS]
description = Dump all Klipper parameters to terminal, helps find names and values of variables for use in macros
gcode = 
	{% set parameters = namespace(output = '') %}
	{% for name1 in printer %}
	{% for name2 in printer[name1] %}
	{% set donotwant = ['bed_mesh','configfile'] %}
	{% if name1 is not in donotwant %}
	{% set param = "printer['%s'].%s = %s" % (name1, name2, printer[name1][name2]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endif %}
	{% else %}
	{% set param = "printer['%s'] = %s" % (name1, printer[name1]) %}
	{% set parameters.output = parameters.output +  param + "\n" %}
	{% endfor %}
	{% endfor %}
	{action_respond_info(parameters.output)}

[gcode_macro TEST_SPEED]
gcode = 
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	{% set iterations = params.ITERATIONS|default(5)|int %}
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	{% set bound = params.BOUND|default(20)|int %}
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	SAVE_GCODE_STATE NAME=TEST_SPEED
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	G28
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	{% for i in range(iterations) %}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	G28
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[gcode_macro FEED_RATE_TEST]
gcode = 
	{% if printer.configfile.config.respond is not defined %}
	{action_raise_error("This gcode_macro requires the [respond] section in your printer.cfg")}
	{% endif %}
	{% set ns_test_steps = namespace(collector="", arr=[]) %}
	{% for char in params.TEST_STEPS|default("x_test,y_test,rect_test,diag_test")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% set ns_test_steps.arr = ns_test_steps.arr + [ns_test_steps.collector|string] %}
	{% set ns_test_steps.collector = "" %}
	{% else %}
	{% set ns_test_steps.collector = ns_test_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_speed_steps = namespace(collector="", arr=[]) %}
	{% for char in params.SPEED_STEPS|default("80.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% set ns_speed_steps.arr = ns_speed_steps.arr + [ns_speed_steps.collector|float] %}
	{% set ns_speed_steps.collector = "" %}
	{% else %}
	{% set ns_speed_steps.collector = ns_speed_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_distance_steps = namespace(collector="", arr=[]) %}
	{% for char in params.DISTANCE_STEPS|default("40.0")|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% set ns_distance_steps.arr = ns_distance_steps.arr + [ns_distance_steps.collector|float] %}
	{% set ns_distance_steps.collector = "" %}
	{% else %}
	{% set ns_distance_steps.collector = ns_distance_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set ns_accel_steps = namespace(collector="", arr=[]) %}
	{% for char in params.ACCEL_STEPS|default(printer.toolhead.max_accel|string)|string %}
	{% if char == "," or loop.last %}
	{% if loop.last %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% set ns_accel_steps.arr = ns_accel_steps.arr + [ns_accel_steps.collector|int] %}
	{% set ns_accel_steps.collector = "" %}
	{% else %}
	{% set ns_accel_steps.collector = ns_accel_steps.collector ~ char %}
	{% endif %}
	{% endfor %}
	{% set center_x_position = printer.toolhead.axis_maximum.x / 2 %}
	{% set center_y_position = printer.toolhead.axis_maximum.y / 2 %}
	{% set accel_steps = ns_accel_steps.arr %}
	{% set test_steps = ns_test_steps.arr %}
	{% set distance_steps = ns_distance_steps.arr %}
	{% set speed_steps = ns_speed_steps.arr %}
	SAVE_GCODE_STATE NAME=speed_testing_macro
	{% set testRunCounter = namespace(value=0) %}
	RESPOND PREFIX="Speed-Test - " MSG="Starting Speed testing with"
	RESPOND PREFIX="- " MSG="distance_steps={distance_steps}"
	RESPOND PREFIX="- " MSG="speed_steps={speed_steps}"
	RESPOND PREFIX="- " MSG="accel_steps={accel_steps}"
	RESPOND PREFIX="- " MSG="test_steps={test_steps}"
	RESPOND PREFIX="" MSG="--------------------"
	{% if printer.toolhead.homed_axes != "xyz" %}
	G28
	{% endif %}
	G90
	G1 X{center_x_position} Y{center_y_position} Z25 F4000
	{% for distance_step in distance_steps %}
	{% for speed_step in speed_steps %}
	{% set speed_feedrate_step = speed_step * 60 %}
	{% for accel_step in accel_steps %}
	{% set testRunCounter.value = testRunCounter.value + 1 %}
	M204 S{accel_step}
	RESPOND PREFIX="Speed-Test - " MSG="Test-Run {testRunCounter.value} => distance: {distance_step} speed: {speed_step} acceleration: {accel_step}"
	{% for test_step in test_steps %}
	_{test_step|upper} FEEDRATE={speed_feedrate_step} DISTANCE={distance_step}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	{% endfor %}
	RESTORE_GCODE_STATE NAME=speed_testing_macro

[gcode_macro _X_TEST]
description = Moves the head left/right
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _Y_TEST]
description = Moves the head forward/backward
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 y{distance} F{speed_feedrate}
	G1 y-{distance * 2} F{speed_feedrate}
	G1 y{distance} F{speed_feedrate}
	G90

[gcode_macro _RECT_TEST]
description = Moves the head in a rectangle
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x-{distance} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance * 2} F{speed_feedrate}
	G1 y{distance * 2} F{speed_feedrate}
	G1 x-{distance * 2} F{speed_feedrate}
	G1 y-{distance} F{speed_feedrate}
	G1 x{distance} F{speed_feedrate}
	G90

[gcode_macro _DIAG_TEST]
description = Moves the head diagonally. First spinning the stepper_x, then the stepper_y. (CoreXY)
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	G91
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x-{distance * 2} y-{distance * 2} F{speed_feedrate}
	G1 x{distance} y{distance} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G1 x-{distance * 2} y{distance * 2} F{speed_feedrate}
	G1 x{distance} y-{distance} F{speed_feedrate}
	G90

[gcode_macro _CIRCLE_TEST]
description = Moves the head in a circle twice.
gcode = 
	{% set speed_feedrate = params.FEEDRATE|default(4800)|float %}
	{% set distance = params.DISTANCE|default(100)|float %}
	{% if printer.configfile.config.gcode_arcs is not defined %}
	{action_raise_error("The circle test requires the [gcode_arcs] section in your printer.cfg")}
	{% endif %}
	{% for count in range(2) %}
	G2 I{distance} J{distance} F{speed_feedrate}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	CG28                             ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKREAR
	G90                              ; absolute positioning
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	CG28                              ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90                               ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	CG28                               ; home if not already homed
	SAVE_GCODE_STATE NAME=PARKBED
	G90                                ; absolute positioning
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro TOGGLE_BEEPER]
description = Toggle the printer beeper on and off.
gcode = 
	{% set beeper_state = printer.save_variables.variables.beeper_state|lower %}
	{% if printer['gcode_macro _USER_VARIABLE'].debug == 1 %}
	{action_respond_info('==== TOGGLE_BEEPER ====')}
	{action_respond_info("beeper_state: %s" % (beeper_state))}
	{action_respond_info('===============')}
	{% endif %}
	{% if beeper_state == "off" %}
	{action_respond_info('beeper is off, turning it on')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"on"'
	{% else %}
	{action_respond_info('beeper is on= turning it off')}
	SAVE_VARIABLE VARIABLE=beeper_state VALUE='"off"'
	{% endif %}
	SONG_SINGLE_BEEP

[gcode_macro SONG_SINGLE_BEEP]
gcode = 
	M300 S830.61 P137

[output_pin beeper]
pin = PE8
pwm = True
value = 0
shutdown_value = 0
cycle_time = 0.001

[gcode_macro M300]
gcode = 
	{% set S = params.S|default(1000)|int %} ; S sets the tone frequency
	{% set P = params.P|default(100)|int %} ; P sets the tone duration
	{% set L = 0.5 %} ; L varies the PWM on time, close to 0 or 1 the tone gets a bit quieter. 0.5 is a symmetric waveform
	{% if S <= 0 %} ; dont divide through zero
	{% set F = 1 %}
	{% set L = 0 %}
	{% elif S >= 10000 %} ;max frequency set to 10kHz
	{% set F = 0 %}
	{% else %}
	{% set F = 1/S %} ;convert frequency to seconds
	{% endif %}
	SET_PIN PIN=beeper VALUE={L} CYCLE_TIME={F} ;Play tone
	G4 P{P} ;tone duration
	SET_PIN PIN=beeper VALUE=0

[gcode_macro SONG_THUNDERSTRUCK]
gcode = 
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2489 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S987 P166
	M300 S2959 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166
	M300 S987 P166
	M300 S2637 P166
	M300 S987 P166
	M300 S1760 P166

[gcode_macro SONG_AFRICA]
gcode = 
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P450
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P450
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P300
	M300 S2637 P225
	M300 S2637 P300
	M300 S2489 P300
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P600
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200
	M300 S2959 P150
	M300 S2959 P150
	M300 S2959 P600
	M300 S2959 P150
	M300 S2959 P450
	M300 S3322 P300
	M300 S1864 P150
	M300 S1975 P1200
	M300 S2489 P150
	M300 S2489 P150
	M300 S2489 P150
	M300 S2637 P300
	M300 S2959 P300
	M300 S2959 P450
	M300 S2637 P300
	M300 S2637 P300
	M300 S2489 P225
	M300 S2217 P600
	M300 S2217 P300
	M300 S987 P300
	M300 S2489 P900
	M300 S2217 P150
	M300 S987 P300
	M300 S2217 P1200

[gcode_macro SONG_STARWARS_IMP]
gcode = 
	M300 S1174 P401
	M300 S1174 P401
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P401
	M300 S466 P267
	M300 S1396 P133
	M300 S1174 P803

[gcode_macro SONG_ALLIWANT]
gcode = 
	M300 S1046 P333
	M300 S1318 P333
	M300 S1567 P333
	M300 S987 P166
	M300 S0 P41
	M300 S2093 P333
	M300 S0 P83
	M300 S0 P41
	M300 S987 P333
	M300 S880 P166
	M300 S0 P41
	M300 S1567 P333
	M300 S0 P83
	M300 S0 P41
	M300 S2349 P333
	M300 S2093 P333
	M300 S2093 P333
	M300 S987 P333
	M300 S2093 P166
	M300 S0 P41
	M300 S987 P333
	M300 S0 P83
	M300 S0 P41
	M300 S880 P166
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S880 P333
	M300 S2093 P333
	M300 S2349 P333
	M300 S2637 P333
	M300 S2349 P166
	M300 S2093 P333
	M300 S880 P333
	M300 S0 P166
	M300 S1396 P333
	M300 S3135 P166
	M300 S2093 P333
	M300 S0 P166
	M300 S2349 P333
	M300 S2349 P166
	M300 S2349 P333
	M300 S0 P166
	M300 S1760 P166
	M300 S3135 P666
	M300 S880 P500
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P500
	M300 S1318 P166
	M300 S0 P333
	M300 S0 P166
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S1318 P333
	M300 S1396 P333
	M300 S0 P166
	M300 S1318 P166
	M300 S0 P333
	M300 S1174 P166
	M300 S0 P333
	M300 S1046 P500
	M300 S0 P666
	M300 S1760 P333
	M300 S880 P166
	M300 S880 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S880 P333
	M300 S0 P166
	M300 S2349 P166
	M300 S0 P333
	M300 S1567 P166
	M300 S0 P333
	M300 S1396 P500
	M300 S0 P166
	M300 S1760 P500
	M300 S2093 P333
	M300 S1567 P333
	M300 S0 P166
	M300 S1396 P166
	M300 S0 P333
	M300 S1567 P500
	M300 S1396 P166
	M300 S0 P333
	M300 S2093 P500
	M300 S1046 P166
	M300 S1046 P166
	M300 S1174 P166
	M300 S1318 P166
	M300 S1396 P333

[gcode_macro SONG_MACGYVER]
gcode = 
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S4434 P150
	M300 S2217 P300
	M300 S0 P150
	M300 S2959 P150
	M300 S3322 P300
	M300 S0 P150
	M300 S0 P150
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S1864 P150
	M300 S1864 P150
	M300 S1864 P150
	M300 S3322 P150
	M300 S0 P150
	M300 S3520 P150
	M300 S0 P300
	M300 S0 P300
	M300 S4434 P150
	M300 S4434 P300
	M300 S2217 P300
	M300 S0 P300
	M300 S2959 P150
	M300 S1864 P300
	M300 S3322 P300
	M300 S0 P300

[gcode_macro SONG_TAKEONME]
gcode = 
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300
	M300 S932 P150
	M300 S1661 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S1661 P150
	M300 S932 P150
	M300 S932 P150
	M300 S932 P150
	M300 S1479 P300
	M300 S1244 P300
	M300 S1661 P300
	M300 S1661 P300
	M300 S1661 P150
	M300 S2093 P150
	M300 S2093 P150
	M300 S2217 P150
	M300 S2489 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S2217 P150
	M300 S1661 P300
	M300 S1479 P300
	M300 S932 P300
	M300 S932 P300

[gcode_macro SONG_DUCKTOY]
gcode = 
	M300 S2217 P240
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2217 P240
	M300 S987 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S2489 P240
	M300 S2217 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S3322 P240
	M300 S2959 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S1975 P240
	M300 S1108 P120
	M300 S0 P120
	M300 S4434 P240
	M300 S1108 P120

[gcode_macro SONG_LOONEY]
gcode = 
	M300 S2093 P428
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S880 P642
	M300 S2093 P214
	M300 S2793 P214
	M300 S2637 P214
	M300 S2349 P214
	M300 S2489 P214
	M300 S2637 P642
	M300 S2637 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S2093 P214
	M300 S2637 P214
	M300 S2093 P214
	M300 S2349 P214
	M300 S880 P214
	M300 S2093 P214
	M300 S1567 P214
	M300 S932 P214
	M300 S880 P214
	M300 S1396 P214

[gcode_macro SONG_RICE_COOKER_DONE]
gcode = 
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3951.07 P250
	M300 S3135.96 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S6271.93 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P500
	M300 S5274.04 P250
	M300 S5274.04 P250
	M300 S4698.63 P250
	M300 S5274.04 P250
	M300 S4698.63 P125
	M300 S4186.01 P125
	M300 S3951.07 P125
	M300 S3520.00 P125
	M300 S3135.96 P500

[gcode_macro Song_Futurama1]
gcode = 
	M300 S0 P2105
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S2637 P263
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S1760 P263
	M300 S1760 P526
	M300 S2349 P526
	M300 S2349 P526
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S2349 P526
	M300 S2349 P263
	M300 S2959 P526
	M300 S2637 P526
	M300 S2637 P526
	M300 S2637 P263
	M300 S1760 P526
	M300 S3322 P526
	M300 S1975 P526
	M300 S1975 P263
	M300 S3135 P263
	M300 S3135 P263
	M300 S2959 P263
	M300 S2959 P263

[gcode_macro Song_Futurama2]
gcode = 
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S880 P267
	M300 S880 P535
	M300 S1174 P535
	M300 S1174 P535
	M300 S1318 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S1174 P535
	M300 S1174 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S1318 P535
	M300 S1318 P535
	M300 S1318 P267
	M300 S880 P535
	M300 S1661 P535
	M300 S987 P535
	M300 S987 P133
	M300 S987 P133
	M300 S1567 P267
	M300 S1567 P267
	M300 S1479 P267
	M300 S1479 P267
	M300 S0 P267
	M300 S1318 P133
	M300 S1318 P133
	M300 S1318 P267
	M300 S1244 P267
	M300 S1174 P267
	M300 S1174 P267
	M300 S1108 P267
	M300 S1108 P267

[gcode_macro Song_Mario]
gcode = 
	M300 S1046 P150
	M300 S1318 P150
	M300 S1567 P150
	M300 S2093 P150
	M300 S2637 P150
	M300 S3135 P400
	M300 S2637 P400
	M300 S1046 P150
	M300 S1244 P150
	M300 S1661 P150
	M300 S2093 P150
	M300 S2489 P150
	M300 S3322 P400
	M300 S2489 P400
	M300 S1174 P150
	M300 S1396 P150
	M300 S932 P150
	M300 S2349 P150
	M300 S2793 P150
	M300 S1864 P150
	M300 S0 P400
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S1864 P120
	M300 S0 P60
	M300 S4186 P900

[gcode_macro Song_Mario2]
gcode = 
	M300 P214 S659
	M300 P210 S659
	M300 P219 S0
	M300 P210 S659
	M300 P219 S0
	M300 P214 S523
	M300 P357 S659
	M300 P72 S0
	M300 P357 S784
	M300 P500 S0
	M300 P357 S392
	M300 P500 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P200 S0
	M300 P150 S587
	M300 P150 S494
	M300 P150 S523
	M300 P250 S587
	M300 P50 S0
	M300 P150 S392
	M300 P150 S587
	M300 P150 S587
	M300 P147 S440
	M300 P153 S0
	M300 P150 S587
	M300 P550 S494
	M300 P951 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S523
	M300 P675 S0
	M300 P150 S587
	M300 P150 S523
	M300 P150 S587
	M300 P147 S494
	M300 P153 S0
	M300 P150 S587
	M300 P825 S784
	M300 P675 S0
	M300 P150 S880
	M300 P150 S784
	M300 P150 S880
	M300 P147 S784
	M300 P153 S0
	M300 P150 S988
	M300 P825 S784
	M300 P675 S0
	M300 P2001 S131
	M300 P250 S330
	M300 P245 S330
	M300 P756 S0
	M300 P250 S330
	M300 P250 S330
	M300 P125 S330
	M300 P125 S330
	M300 P250 S349
	M300 P245 S349
	M300 P756 S0
	M300 P250 S349
	M300 P250 S349
	M300 P125 S349
	M300 P125 S349
	M300 P250 S392
	M300 P245 S392

[gcode_macro Song_Doom]
gcode = 
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P57 S82
	M300 P78 S0
	M300 P142 S82
	M300 P135 S123
	M300 P135 S131
	M300 P28 S82
	M300 P106 S0
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P114 S131
	M300 P28 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P674 S117
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S147
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S117
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P142 S123
	M300 P135 S131
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P135 S131
	M300 P50 S82
	M300 P92 S0
	M300 P135 S82
	M300 P667 S117
	M300 P7 S82
	M300 P35 S82
	M300 P92 S0
	M300 P7 S82
	M300 P135 S82
	M300 P135 S165
	M300 P43 S82
	M300 P92 S0
	M300 P135 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131
	M300 P128 S131
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S117
	M300 P128 S117
	M300 P7 S82
	M300 P57 S82
	M300 P78 S0
	M300 P135 S82
	M300 P135 S123
	M300 P135 S131
	M300 P7 S82
	M300 P21 S82
	M300 P106 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P128 S165
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S147
	M300 P128 S147
	M300 P7 S82
	M300 P43 S82
	M300 P85 S0
	M300 P7 S82
	M300 P135 S82
	M300 P114 S131
	M300 P21 S0
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P7 S117
	M300 P667 S117
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S165
	M300 P135 S165
	M300 P50 S82
	M300 P85 S0
	M300 P135 S82
	M300 P135 S147
	M300 P7 S82
	M300 P50 S82
	M300 P78 S0
	M300 P7 S82
	M300 P128 S82
	M300 P7 S131

[gcode_macro Song_Simpsons]
gcode = 
	M300 P563 S523
	M300 P375 S659
	M300 P375 S740
	M300 P188 S880
	M300 P563 S784
	M300 P375 S659
	M300 P375 S523
	M300 P188 S440
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P750 S392
	M300 P375 S0
	M300 P188 S370
	M300 P188 S370
	M300 P188 S370
	M300 P188 S392
	M300 P563 S466
	M300 P188 S523
	M300 P188 S523
	M300 P188 S523
	M300 P375 S523

[gcode_macro Song_Centerfold]
gcode = 
	M300 P539 S494
	M300 P386 S587
	M300 P143 S494
	M300 P266 S440
	M300 P261 S392
	M300 P511 S392
	M300 P268 S330
	M300 P261 S392
	M300 P420 S392
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P245 S392
	M300 P273 S440
	M300 P557 S494
	M300 P73 S0
	M300 P393 S587
	M300 P148 S494
	M300 P273 S440
	M300 P261 S392
	M300 P539 S392
	M300 P34 S0
	M300 P261 S330
	M300 P261 S392
	M300 P268 S392
	M300 P130 S330
	M300 P148 S392
	M300 P268 S440
	M300 P284 S392
	M300 P273 S392
	M300 P273 S440
	M300 P534 S494
	M300 P34 S0
	M300 P402 S587
	M300 P143 S494
	M300 P261 S440
	M300 P266 S392
	M300 P518 S392
	M300 P284 S330
	M300 P284 S392
	M300 P277 S392
	M300 P155 S330
	M300 P152 S392
	M300 P257 S440
	M300 P255 S392
	M300 P280 S392
	M300 P300 S440
	M300 P507 S494
	M300 P414 S587
	M300 P136 S494
	M300 P291 S440
	M300 P255 S392
	M300 P541 S392
	M300 P277 S330
	M300 P291 S392
	M300 P273 S392
	M300 P141 S330
	M300 P155 S392
	M300 P273 S440
	M300 P250 S392
	M300 P273 S392
	M300 P266 S440
	M300 P280 S494
	M300 P250 S587
	M300 P545 S587
	M300 P261 S587
	M300 P164 S587
	M300 P575 S659

[gcode_macro Song_GanstaParadise]
gcode = 
	M300 P19 S1047
	M300 P539 S104
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P37 S523
	M300 P142 S98
	M300 P6 S87
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P167 S494
	M300 P19 S98
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P31 S523
	M300 P155 S87
	M300 P6 S1047
	M300 P551 S65
	M300 P186 S392
	M300 P198 S784
	M300 P359 S0
	M300 P186 S523
	M300 P12 S1047
	M300 P545 S104
	M300 P186 S523
	M300 P235 S1047
	M300 P322 S0
	M300 P56 S523
	M300 P130 S98
	M300 P25 S1047
	M300 P532 S87
	M300 P186 S523
	M300 P204 S1047
	M300 P353 S0
	M300 P186 S494
	M300 P12 S988
	M300 P545 S98
	M300 P186 S494
	M300 P173 S988
	M300 P384 S0
	M300 P50 S523
	M300 P118 S87
	M300 P19 S65
	M300 P155 S1047
	M300 P402 S0
	M300 P186 S392
	M300 P130 S784
	M300 P613 S0
	M300 P173 S1047
	M300 P384 S0
	M300 P161 S523
	M300 P25 S0
	M300 P161 S1047
	M300 P396 S0
	M300 P186 S523
	M300 P198 S1047
	M300 P359 S0
	M300 P186 S523
	M300 P192 S1047
	M300 P365 S0
	M300 P186 S494
	M300 P198 S988
	M300 P359 S0
	M300 P186 S494
	M300 P167 S988
	M300 P390 S0
	M300 P186 S523
	M300 P180 S1047
	M300 P378 S0
	M300 P186 S392

[gcode_macro Song_Naruto]
gcode = 
	M300 P311 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P35 S0
	M300 P150 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P92 S0
	M300 P309 S740
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P91 S0
	M300 P299 S587
	M300 P150 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P60 S220
	M300 P92 S0
	M300 P309 S659
	M300 P151 S247
	M300 P60 S247
	M300 P91 S0
	M300 P56 S247
	M300 P91 S0
	M300 P61 S247
	M300 P91 S0
	M300 P264 S659
	M300 P30 S0
	M300 P155 S740
	M300 P60 S247
	M300 P91 S0
	M300 P147 S784
	M300 P60 S247
	M300 P90 S0
	M300 P311 S880
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P56 S220
	M300 P91 S0
	M300 P61 S220
	M300 P84 S0
	M300 P302 S220
	M300 P155 S220
	M300 P60 S220
	M300 P87 S0
	M300 P60 S220
	M300 P91 S0
	M300 P60 S220
	M300 P90 S0
	M300 P82 S659
	M300 P229 S1047
	M300 P151 S196
	M300 P60 S196
	M300 P91 S0
	M300 P56 S196
	M300 P91 S0
	M300 P61 S196
	M300 P84 S0
	M300 P271 S1047
	M300 P30 S0
	M300 P155 S1175
	M300 P60 S196
	M300 P87 S0
	M300 P151 S1047
	M300 P60 S196
	M300 P90 S0
	M300 P311 S988
	M300 P151 S220
	M300 P60 S220
	M300 P91 S0
	M300 P113 S880
	M300 P34 S0
	M300 P118 S784
	M300 P34 S0
	M300 P264 S740
	M300 P30 S0
	M300 P153 S784
	M300 P149 S82
	M300 P267 S880
	M300 P34 S0
	M300 P163 S988
	M300 P148 S82
	M300 P151 S82
	M300 P151 S98
	M300 P147 S92

[gcode_macro Song_StillAlive]
gcode = 
	M300 P511 S0
	M300 P247 S440
	M300 P250 S466
	M300 P265 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S659
	M300 P247 S587
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S523
	M300 P247 S523
	M300 P249 S262
	M300 P250 S523
	M300 P250 S262
	M300 P254 S440
	M300 P259 S466
	M300 P269 S523
	M300 P248 S262
	M300 P247 S698
	M300 P249 S262
	M300 P249 S784
	M300 P247 S698
	M300 P247 S659
	M300 P250 S587
	M300 P265 S587
	M300 P248 S659
	M300 P247 S698
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S784
	M300 P250 S880
	M300 P265 S932
	M300 P248 S932
	M300 P247 S880
	M300 P249 S349
	M300 P249 S784
	M300 P247 S349
	M300 P247 S698
	M300 P250 S784
	M300 P265 S880
	M300 P248 S880
	M300 P247 S784
	M300 P249 S262
	M300 P249 S698
	M300 P247 S262
	M300 P247 S587
	M300 P250 S523
	M300 P265 S587
	M300 P248 S698
	M300 P247 S698
	M300 P249 S659
	M300 P249 S220
	M300 P247 S659
	M300 P247 S740
	M300 P250 S740
	M300 P513 S220
	M300 P247 S740
	M300 P249 S587
	M300 P249 S494
	M300 P247 S587
	M300 P247 S740
	M300 P250 S587
	M300 P265 S440

[gcode_macro Song_OnlineSong]
gcode = 
	M300 P699 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P1716 S415
	M300 P318 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P466 S415
	M300 P42 S0
	M300 P699 S622
	M300 P64 S0
	M300 P699 S698
	M300 P64 S0
	M300 P127 S831
	M300 P127 S740
	M300 P127 S698
	M300 P826 S554
	M300 P64 S0
	M300 P699 S622
	M300 P64 S0
	M300 P2097 S415

[gcode_macro _ADD_PRINT_TIME]
description = Helper: Store print time values in variables
gcode = 
	{% set time = printer.print_stats.total_duration %}
	{% set filament = printer.print_stats.filament_used|float %}
	{% set filtertime = time if printer['gcode_macro PRINT_START'].var.filter else 0 %}
	{% if not printer.save_variables.variables.print_stats %}
	{% set print_stats = {'time': {'total': time, 'service': time, 'filter': filtertime}, 'filament': filament}%}
	{% else %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'total':(print_stats.time.total + time)|int}) %}
	{% set _dummy = print_stats.time.update({'service':(print_stats.time.service + time)|int}) %}
	{% set _dummy = print_stats.time.update({'filter':(print_stats.time.filter + filtertime)|int}) %}
	{% set _dummy = print_stats.update({'filament':(print_stats.filament + filament)|float}) %}
	{% endif %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"

[gcode_macro _DISPLAY_PRINT_TIME]
description = Helper: Print actual stored print time
gcode = 
	{% set totaltime = params.SECONDS|int if 'SECONDS' in params|upper
	else printer.save_variables.variables.print_stats.time.total %}
	{% set prefix = params.PREFIX|default('Total') %}
	{% set h,m,s = (totaltime / 3600)|int, ((totaltime / 60) % 60)|int, (totaltime % 60)|int %}
	{action_respond_info("Print time %s %d:%02d:%02d" % (prefix,h,m,s))}
	M117 {prefix} {h}:{'%02d' % m}:{'%02d' % s}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10

[gcode_macro _SD_PRINT_STATS]
description = Helper: Print statistic of last print
gcode = 
	{% set PT = printer.print_stats.print_duration %}
	{% set Ph,Pm,Ps = (PT / 3600)|int, ((PT / 60) % 60)|int, (PT % 60)|int %}
	{% set TT = printer.print_stats.total_duration %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set Fil = printer.print_stats.filament_used|float / 1000.0 %}
	{action_respond_info("Statistic of last Print (%s):
	Name: %s
	Filament: %.4fm
	Print Time: %d:%02d:%02d
	Total Time: %d:%02d:%02d" %
	(params.R, printer.print_stats.filename, Fil, Ph, Pm, Ps, Th, Tm, Ts))}

[gcode_macro _SD_PRINTER_STATS]
description = Helper: Print statistic of printer
gcode = 
	{% set ST = printer.save_variables.variables.print_stats.time.service %}
	{% set Sh,Sm,Ss = (ST / 3600)|int, ((ST / 60) % 60)|int, (ST % 60)|int %}
	{% set TT = printer.save_variables.variables.print_stats.time.total %}
	{% set Th,Tm,Ts = (TT / 3600)|int, ((TT / 60) % 60)|int, (TT % 60)|int %}
	{% set FT = printer.save_variables.variables.print_stats.time.filter %}
	{% set Fh,Fm,Fs = (FT / 3600)|int, ((FT / 60) % 60)|int, (FT % 60)|int %}
	{% set Fil = printer.save_variables.variables.print_stats.filament|float / 1000.0 %}
	{action_respond_info("Printer Statistics:
	Total Print Time: %d:%02d:%02d
	Total Filament used: %.4fm
	Filter use time: %d:%02d:%02d
	Time since last Service: %d:%02d:%02d" %
	(Th, Tm, Ts, Fil, Fh, Fm, Fs, Sh, Sm, Ss))}
	_CHECK_FILTER

[gcode_macro _CHECK_FILTER]
description = Helper: Print filter exchange warning
gcode = 
	{% if printer['gcode_macro _USER_VARIABLE'].hw.filter.ena and
	printer.save_variables.variables.print_stats %}
	{% set Fh = (printer.save_variables.variables.print_stats.time.filter / 3600)|int %}
	{% if Fh >= printer['gcode_macro _USER_VARIABLE'].peripheral.filter.warning %}
	M117 Change Filter!
	{action_respond_info("Change Filter material at Micro!")}
	UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10
	{% endif %}
	{% endif %}

[gcode_macro RST_FILTER]
description = Reset Nevermore interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'filter': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Flter used time reseted to zero")}
	{% endif %}

[gcode_macro RST_SERVICE]
description = Reset Service interval time
gcode = 
	{% if printer.save_variables.variables.print_stats %}
	{% set print_stats = printer.save_variables.variables.print_stats %}
	{% set _dummy = print_stats.time.update({'service': 0}) %}
	SAVE_VARIABLE VARIABLE=print_stats VALUE="{print_stats}"
	{action_respond_info("Time since last service reseted to zero")}
	{% endif %}

[save_variables]
filename = /home/pi/klipper_config/.variables.stb

[delayed_gcode _INIT]
initial_duration = 1
gcode = 
	_USER_VARIABLE
	_CHECK_CONSITENT
	_EXECUTE_AT_INIT

[gcode_macro _EXECUTE_AT_INIT]
description = Helper: Everything that should run at klipper start
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% if printer.save_variables.variables.filament_sensor %} _RESTORE_FILAMENT_SENSOR {% endif %}
	{% if user.hw.filter.ena %} _CHECK_FILTER {% endif %}
	{% if user.hw.display.ena %} UPDATE_DELAYED_GCODE ID=_DISPLAY_INIT DURATION=2 {% endif %}
	_PRINT_AR T="Klipper INIT done"

[gcode_macro _CHECK_CONSITENT]
description = Helper: Check that some criterias are meet in the printer.cfg
gcode = 
	{% set user = printer['gcode_macro _USER_VARIABLE'] %}
	{% set text = ["CONFIG: ERROR"] %}
	{% if user.run is not defined %}
	{% set _dummy = text.append("_USER_VARIABLE macro missing") %}
	{% elif not user.run %}
	{% set _dummy = text.append("_USER_VARIABLE macro not executed") %}
	{% endif %}
	{% if 'save_variables' not in printer %}
	{% set _dummy = text.append("[save_variables] missing") %}
	{% endif %}
	{% if 'virtual_sdcard' not in printer %}
	{% set _dummy = text.append("[virtual_sdcard] missing") %}
	{% endif %}
	{% if text|length > 1 %}
	{action_respond_info(text|join("\n"))}
	{% endif %}

[gcode_macro _USER_VARIABLE]
description = Helper: Contains User defined printer variables
variable_hw = {}
variable_homing = {}
variable_z_hop = 0
variable_speed = {}
variable_probe = {}
variable_park = {}
variable_filament = {}
variable_purge = {}
variable_print_start = {}
variable_unload_sd = False
variable_prime = {}
variable_respond = {}
variable_peripheral = {}
variable_run = False
gcode = 
	{% set user_z_endstop_xy = [143,256] %}
	{% set user_z_endstop_hop = 7.5 %}
	{% set user_z_home_current = 0.35 %}
	{% set user_home_accel = 1200 %}
	{% set user_bed_y_offset = 7 %}
	{% set user_z_hop_speed = 15 %}
	{% set user_retract_speed = 30 %}
	{% set user_travel_speed = 300 %}
	{% set user_probe_dock_speed = 50 %}
	{% set user_filament_load_speed = 50 %}
	{% set user_wipe_speed = 200 %}
	{% set user_prime_speed = 25 %}
	{% set user_probe_dock_pos = [181,251] %}
	{% set user_probe_delta_x = 30 %}
	{% set user_probe_delta_y = -30 %}
	{% set user_z_probe_hop = 15.5 %}
	{% set user_park_xy_delta = 25 %}
	{% set user_park_z_max_delta = 40 %}
	{% set user_park_z_min = 30 %}
	{% set user_park_pause_z_delta = 2.0 %}
	{% set user_park_at_cancel = true %}
	{% set user_extruder_min_add = 30 %}
	{% set user_load_distance = 90 %}
	{% set user_load_extrude = 50 %}
	{% set user_unload_distance = 75 %}
	{% set user_retract_end = 2 %}
	{% set user_retract_pause = 1 %}
	{% set user_brush_pos = 'left' %}
	{% set user_brush_x_middle = 52 %}
	{% set user_brush_x_width = 45 %}
	{% set user_brush_y_start = 256 %}
	{% set user_wipe_z = 0.5 %}
	{% set user_wipe_cnt = 5 %}
	{% set user_z_purge = 2.5 %}
	{% set user_print_start_bed_up = 10 %}
	{% set user_print_start_ival = 1 %}
	{% set user_print_start_extruder_time = 0.5 %}
	{% set user_print_start_bed_time = 0.5 %}
	{% set user_print_start_prime_mult = 2 %}
	{% set user_unload_sd = True %}
	{% set user_prime_start_xy = [5.0,30.0] %}
	{% set user_prime_z = 0.2 %}
	{% set user_prime_dir = 'Y+' %}
	{% set user_prime_spacing = 0.4 %}
	{% set user_prime_length = 220 %}
	{% set user_prime_seg = 11 %}
	{% set user_prime_extrude_per_seg = 2 %}
	{% set user_respond_set_z_current = 0 %}
	{% set user_respond_set_acc = 0 %}
	{% set user_respond_probe_action = 1 %}
	{% set user_respond_layer = 0 %}
	{% set user_filter_on = 0 %}
	{% set user_filter_use_time = 0 %}
	{% set user_vent_on = 0 %}
	{% set user_caselight_on = 0.2 %}
	{% set user_fan_run_after_print = 0 %}
	{% set min = printer.toolhead.axis_minimum %}
	{% set max = printer.toolhead.axis_maximum %}
	{% set cfg_endstop_z_offset = printer.configfile.settings.stepper_z.position_endstop|default(0.0)|float %}
	{% set hw_dic = {'display'       : {'ena' : True if 'neopixel neo_display' in printer.configfile.settings
	else False},
	'chamber'       : {'type': 'sensor' if 'temperature_sensor chamber' in printer.configfile.settings
	else 'fan'    if 'temperature_fan chamber' in printer.configfile.settings
	else 'none'},
	'caselight'     : {'ena' : True if 'output_pin caselight' in printer.configfile.settings
	else False},
	'filter'        : {'ena' : True if 'fan_generic filter' in printer.configfile.settings
	else False},
	'runout'        : {'type': 'switch' if 'filament_switch_sensor runout' in printer.configfile.settings
	else 'motion' if 'filament_motion_sensor runout' in printer.configfile.settings
	else 'file'   if 'save_variables' in printer and filament_loaded in printer.save_variables.variables
	else 'none'},
	'relay'         : {'ena' : True if 'output_pin extruder_relay' in printer.configfile.settings and
	'output_pin heater_bed_relay' in printer.configfile.settings
	else False},
	'auto_z_offset' : {'type': 'z_calib+flexplate' if 'z_calibration' in printer and 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'z_calib'           if 'z_calibration' in printer
	else 'flexplate'         if 'save_variables' in printer and 'plates' in printer.save_variables.variables
	else 'none'},
	'mag_probe'     : {'ena' : True if printer['gcode_macro _MAG_PROBE'] is defined or 'dockable_probe' in printer
	else False},
	'endstop_temp'  : {'ena' : True if 'temperature_sensor endstop' in printer.configfile.settings
	else False}}%}
	{% set _dummy = hw_dic.chamber.update({'ena': True if hw_dic.chamber.type != 'none' else False}) %}
	{% set _dummy = hw_dic.chamber.update({'fan': True if hw_dic.chamber.type == 'fan' else False}) %}
	{% set _dummy = hw_dic.runout.update({'ena': True if hw_dic.runout.type != 'none' else False}) %}
	{% set _dummy = hw_dic.runout.update({'sensor': True if hw_dic.runout.type == 'switch' or hw_dic.runout.type == 'motion'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'ena': True if hw_dic.auto_z_offset.type != 'none' else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'auto': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'z_calib'
	else False}) %}
	{% set _dummy = hw_dic.auto_z_offset.update({'manu': True if hw_dic.auto_z_offset.type == 'z_calib+flexplate' or
	hw_dic.auto_z_offset.type == 'flexplate'
	else False}) %}
	{% set bed = {'min': {'x': min.x, 'y': min.y                    , 'z': 0    },
	'max': {'x': max.x, 'y': max.y - user_bed_y_offset, 'z': max.z}} %}
	{% set calc_center = {'x': (bed.max.x - bed.min.x) / 2,
	'y': (bed.max.y - bed.min.y) / 2,
	'z': (bed.max.z - bed.min.z) / 2} %}
	{% set calc_park = {'min': {'x': bed.min.x + user_park_xy_delta,
	'y': bed.min.y + user_park_xy_delta,
	'z': bed.min.z + user_park_z_min},
	'max': {'x': bed.max.x - user_park_xy_delta,
	'y': bed.max.y - user_park_xy_delta,
	'z': bed.max.z - user_park_z_max_delta}} %}
	{% set calc_z_endstop_z = cfg_endstop_z_offset|round(0, 'ceil') + 1.0 if cfg_endstop_z_offset > 0 else 1.0 %}
	{% set calc_z_hop = user_z_probe_hop if hw_dic.mag_probe.ena and user_z_probe_hop > user_z_endstop_hop
	else user_z_endstop_hop %}
	{% set calc_brush = {'start': user_brush_x_middle - user_brush_x_width / 2,
	'end'  : user_brush_x_middle + user_brush_x_width / 2} %}
	{% set calc_purge = {'x': (min.x + calc_brush.start) / 2 if user_brush_pos|lower == 'left'
	else max.x - (max.x - calc_brush.end) / 2,
	'y': max.y} %}
	{% set calc_wipe = {'start': {'x': calc_brush.start if user_brush_pos|lower == 'left'
	else calc_brush.end,
	'y': user_brush_y_start},
	'end'  : {'x': calc_brush.end if user_brush_pos|lower == 'left'
	else calc_brush.start,
	'y': max.y}} %}
	{% set homing_dic = {'z_endstop': {'x':user_z_endstop_xy[0], 'y':user_z_endstop_xy[1], 'z':calc_z_endstop_z, 'hop':user_z_endstop_hop},
	'z_current': user_z_home_current,
	'accel'    : user_home_accel} %}
	{% set purge_dic = {'purge' : {'x':calc_purge.x, 'y':calc_purge.y, 'z':user_z_purge},
	'wipe'  : {'start'  : {'x': calc_wipe.start.x, 'y': calc_wipe.start.y, 'z':user_wipe_z},
	'end'    : {'x': calc_wipe.end.x,   'y': calc_wipe.end.y,   'z':user_wipe_z},
	'offset' : (calc_wipe.end.y - calc_wipe.start.y) / user_wipe_cnt,
	'cnt'    : user_wipe_cnt}} %}
	{% set probe_dic = {'dock'        : {'x'    : user_probe_dock_pos[0],
	'y'    : user_probe_dock_pos[1] + user_probe_delta_y},
	'store'       : {'x'    : user_probe_dock_pos[0] + user_probe_delta_x,
	'y'    : user_probe_dock_pos[1]}} %}
	{% set speed_dic = {'z_hop'   : (user_z_hop_speed * 60),
	'retract' : (user_retract_speed * 60),
	'travel'  : (user_travel_speed * 60),
	'dock'    : (user_probe_dock_speed * 60),
	'load'    : (user_filament_load_speed * 60),
	'wipe'    : (user_wipe_speed * 60),
	'prime'   : (user_prime_speed * 60)} %}
	{% set park_dic = {'bed'           : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_park.min.z},
	'center'        : {'x': calc_center.x,   'y': calc_center.y,   'z': calc_center.z},
	'front'         : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.max.z},
	'frontlow'      : {'x': calc_center.x,   'y': calc_park.min.y, 'z': calc_park.min.z},
	'rear'          : {'x': calc_park.min.x, 'y': calc_park.max.y, 'z': calc_park.max.z},
	'pause'         : {'x': calc_purge.x,    'y': calc_purge.y,   'dz': user_park_pause_z_delta},
	'park_at_cancel': user_park_at_cancel} %}
	{% set filament_dic = {'load_distance'   : user_load_distance,
	'load_extrude'    : user_load_extrude,
	'unload_distance' : user_unload_distance,
	'retract'         : {'end'   : user_retract_end,
	'pause' : user_retract_pause,
	'cancel': user_retract_end - user_retract_pause}} %}
	{% set prime_dic = {'pos'             : {'x':user_prime_start_xy[0], 'y':user_prime_start_xy[1], 'z':user_prime_z},
	'dir'             : user_prime_dir,
	'spacing'         : user_prime_spacing,
	'length_per_seg'  : user_prime_length / user_prime_seg,
	'seg'             : user_prime_seg,
	'extrude_per_seg' : user_prime_extrude_per_seg} %}
	{% set print_start_dic = {'bed_up'     : user_print_start_bed_up|float|round(1),
	'ival'       : user_print_start_ival|int,
	'time'       : {'extruder' : (user_print_start_extruder_time * 60)|int,
	'bed'      : (user_print_start_bed_time * 60)|int},
	'prime_mult' : user_print_start_prime_mult|float} %}
	{% set respond_dic = {'z_current'    : user_respond_set_z_current,
	'acc'          : user_respond_set_acc,
	'probe_action' : user_respond_probe_action,
	'layer'        : user_respond_layer} %}
	{% set peripheral_dic =  {'filter'     : {'on_val'          : user_filter_on,
	'warning'         : user_filter_use_time,
	'run_after_print' : (user_fan_run_after_print * 60)},
	'vent'      : {'on_val'          : user_vent_on,
	'run_after_print' : ((user_fan_run_after_print * 60) + 5)},
	'caselight' : {'on_val' : user_caselight_on}} %}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=hw VALUE="{hw_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=homing VALUE="{homing_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=z_hop VALUE={calc_z_hop}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=speed VALUE="{speed_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=probe VALUE="{probe_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=park VALUE="{park_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=filament VALUE="{filament_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=purge VALUE="{purge_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=print_start VALUE="{print_start_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=unload_sd VALUE={user_unload_sd}
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=prime VALUE="{prime_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=respond VALUE="{respond_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=peripheral VALUE="{peripheral_dic}"
	SET_GCODE_VARIABLE MACRO=_USER_VARIABLE VARIABLE=run VALUE=True

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Run standard input shaper test for all axes
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=X
	M400
	TEST_RESONANCES AXIS=Y
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Run custom demi-axe test to analyze belts on CoreXY printers
gcode = 
	{% set verbose = params.VERBOSE|default(true) %}
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b
	M400
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a
	M400
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set verbose = params.VERBOSE|default(true) %}
	{% set min_speed = params.MIN_SPEED|default(20)|int * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|int * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	{% if (size / (max_speed / 60)) < 0.25 %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	G90
	G1 X{mid_x - size / 2} Y{mid_y - size / 2} Z{z_height} F{feedrate_travel}
	{% for curr_speed in range(min_speed, max_speed + speed_increment) %}
	{% if (curr_speed - min_speed) % speed_increment == 0 %}
	{% if verbose %}
	RESPOND MSG="Current speed: {(curr_speed / 60)|int} mm/s"
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G1 X{mid_x + size / 2} F{curr_speed}
	G1 Y{mid_y + size / 2} F{curr_speed}
	G1 X{mid_x - size / 2} F{curr_speed}
	G1 Y{mid_y - size / 2} F{curr_speed}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{(curr_speed / 60)|int}n1
	G4 P300
	M400
	{% endif %}
	{% endfor %}
	{% if verbose %}
	RESPOND MSG="Graphs generation... Please wait a minute or two and look in the configured folder."
	{% endif %}
	RUN_SHELL_COMMAND CMD=plot_graph PARAMS=VIBRATIONS
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[board_pins]
aliases = 
	EXP1_1=PE8, EXP1_2=PE7,
	EXP1_3=PE9, EXP1_4=PE10,
	EXP1_5=PE12, EXP1_6=PE13,
	EXP1_7=PE14, EXP1_8=PE15,
	EXP1_9=<GND>, EXP1_10=<5V>,
	EXP2_1=PA6, EXP2_2=PA5,
	EXP2_3=PB1, EXP2_4=PA4,
	EXP2_5=PB2, EXP2_6=PA7,
	EXP2_7=PC15, EXP2_8=<RST>,
	EXP2_9=<GND>, EXP2_10=<5V>

[neopixel lcd]
pin = EXP1_6
chain_count = 3
initial_red = 1.0
initial_green = 0.0
initial_blue = 1.0
color_order = RGB

[gcode_macro LCDRGB]
gcode = 
	{% set r = params.R|default(1)|float %}
	{% set g = params.G|default(1)|float %}
	{% set b = params.B|default(1)|float %}
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED={r} GREEN={g} BLUE={b} INDEX=3

[gcode_macro RESETRGB]
gcode = 
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=1 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=2 TRANSMIT=0
	SET_LED LED=lcd RED=0.5 GREEN=0.0 BLUE=0.5 INDEX=3

[delayed_gcode SETDISPLAYNEOPIXEL]
initial_duration = 1
gcode = 
	RESETRGB

[exclude_object]

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32f446xx_2B001000105053424E363620-if00

[virtual_sdcard]
path = /home/pi/gcode_files

[gcode_arcs]
resolution = 0.1

[idle_timeout]
timeout = 2700

[printer]
kinematics = corexy
max_velocity = 500
max_accel = 10000
max_z_velocity = 15
max_z_accel = 50
square_corner_velocity = 8.0

[input_shaper]
shaper_type_x = ei
shaper_freq_x = 70.8
shaper_type_y = mzv
shaper_freq_y = 58.2

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345]
cs_pin = rpi:None

[resonance_tester]
accel_chip = adxl345
probe_points = 
	125, 125, 5

[stepper_x]
step_pin = PF13
dir_pin = PF12
enable_pin = !PF14
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG6
position_min = 0
position_endstop = 247
position_max = 247
homing_speed = 80
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_x]
uart_pin = PC4
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_y]
step_pin = PG0
dir_pin = PG1
enable_pin = !PF15
rotation_distance = 40
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG9
position_min = 0
position_endstop = 257
position_max = 257
homing_speed = 60
second_homing_speed = 25
homing_retract_dist = 5
homing_positive_dir = true

[tmc2209 stepper_y]
uart_pin = PD11
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z]
step_pin = PF11
dir_pin = PG3
enable_pin = !PG5
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200
endstop_pin = PG10
position_max = 250
position_min = -2.5
homing_speed = 10.0
second_homing_speed = 3
homing_retract_dist = 3
position_endstop = -0.369

[tmc2209 stepper_z]
uart_pin = PC6
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z1]
step_pin = PG4
dir_pin = PC1
enable_pin = !PA0
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z1]
uart_pin = PC7
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[stepper_z2]
step_pin = PF9
dir_pin = PF10
enable_pin = !PG2
rotation_distance = 4
microsteps = 32
full_steps_per_rotation = 200

[tmc2209 stepper_z2]
uart_pin = PF2
interpolate = false
run_current = 1.0
sense_resistor = 0.110
stealthchop_threshold = 0

[extruder]
step_pin = PE6
dir_pin = !PA14
enable_pin = !PE0
rotation_distance = 5.613
microsteps = 32
full_steps_per_rotation = 200
nozzle_diameter = 0.400
filament_diameter = 1.75
heater_pin = PA2
sensor_type = ATC Semitec 104NT-4-R025H42G
sensor_pin = PF4
min_temp = 0
max_temp = 270
max_power = 1.0
min_extrude_temp = 170
max_extrude_only_distance = 200
pressure_advance = 0.04
pressure_advance_smooth_time = 0.040
control = pid
pid_kp = 29.726
pid_ki = 3.539
pid_kd = 62.424

[tmc2209 extruder]
uart_pin = PD3
interpolate = false
run_current = 0.55
sense_resistor = 0.110
stealthchop_threshold = 0

[verify_heater extruder]
max_error = 120
check_gain_time = 20
hysteresis = 5
heating_gain = 2

[heater_bed]
heater_pin = PA1
sensor_type = Generic 3950
sensor_pin = PF3
max_power = 0.68
min_temp = 0
max_temp = 120
control = pid
pid_kp = 38.757
pid_ki = 1.485
pid_kd = 252.888

[verify_heater heater_bed]
max_error = 120
check_gain_time = 90
hysteresis = 5
heating_gain = 2

[probe]
pin = PG15
x_offset = 0
y_offset = 19.75
z_offset = 6.42
speed = 10
lift_speed = 25
samples = 3
samples_result = median
sample_retract_dist = 0.8
samples_tolerance = 0.007
samples_tolerance_retries = 10

[z_tilt]
z_positions = 
	-46, 20
	125, 313
	296, 20
points = 
	30, 5
	125, 195
	220, 5
speed = 350
horizontal_move_z = 10
retries = 5
retry_tolerance = 0.0075

[bed_mesh]
speed = 350
horizontal_move_z = 10
mesh_min = 40,40
mesh_max = 210,210
fade_start = 0.6
fade_end = 10.0
probe_count = 9,9
algorithm = bicubic
relative_reference_index = 12
mesh_pps = 2,2

[output_pin light]
pin = PB10
pwm = true
shutdown_value = 0
value = 100
scale = 100
cycle_time = 0.010

[gcode_macro light_off]
gcode = 
	set_pin pin=light value=0

[gcode_macro light_dim]
gcode = 
	set_pin pin=light value=25

[gcode_macro light_on]
gcode = 
	{% set S = params.S|default(100)|float %}
	set_pin pin=light value={S}

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
max_temp = 100

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
max_temp = 100

[temperature_sensor chamber]
sensor_type = Generic 3950
sensor_pin = PF5
min_temp = 0
max_temp = 75
gcode_id = chamber
=======================
Declaration of '__main __octoprint' hides previous menuitem declaration
Declaration of '__main __setup __calib __delta_calib_auto' hides previous menuitem declaration
Declaration of '__main __setup __calib __delta_calib_man' hides previous menuitem declaration
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1965818344: New connection
webhooks client 1965818344: Client info {'program': 'Moonraker', 'version': 'v0.7.1-783-gf7d8af6'}
mcu 'mcu': got {'#receive_time': 410.066500051, u'next_clock': 1059155968, u'oid': 32, u'value': 31576, '#name': u'analog_in_state', '#sent_time': 410.046166354}
mcu 'mcu': got {'#receive_time': 410.096645208, u'next_clock': 1064555968, u'oid': 35, u'value': 7492, '#name': u'analog_in_state', '#sent_time': 410.046166354}
mcu 'mcu': got {'#receive_time': 410.106856197, u'next_clock': 1066355968, u'oid': 36, u'value': 31580, '#name': u'analog_in_state', '#sent_time': 410.098972604}
mcu 'mcu': got {'#receive_time': 410.165853593, u'next_clock': 1077155968, u'oid': 42, u'value': 31568, '#name': u'analog_in_state', '#sent_time': 410.151326822}
mcu 'mcu': got {'#receive_time': 410.366485312, u'next_clock': 1113155968, u'oid': 32, u'value': 31575, '#name': u'analog_in_state', '#sent_time': 410.359593124}
mcu 'mcu': got {'#receive_time': 410.396619635, u'next_clock': 1118555968, u'oid': 35, u'value': 7493, '#name': u'analog_in_state', '#sent_time': 410.359593124}
mcu 'mcu': got {'#receive_time': 410.406738489, u'next_clock': 1120355968, u'oid': 36, u'value': 31582, '#name': u'analog_in_state', '#sent_time': 410.359593124}
Loaded MCU 'mcu' 105 commands (v0.11.0-41-g9b60daf6 / gcc: (15:7-2018-q2-6) 7.3.1 20180622 (release) [ARM/embedded-7-branch revision 261907] binutils: (2.31.1-11+rpi1+11) 2.31.1)
MCU 'mcu' config: BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c3=PA8,PC9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi3a=PC11,PC12,PC10 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_i2c1a=PB8,PB9 RESERVE_PINS_USB=PA11,PA12 CLOCK_FREQ=180000000 BUS_PINS_spi1a=PB4,PB5,PB3 STATS_SUMSQ_BASE=256 BUS_PINS_spi3=PB4,PB5,PB3 STEPPER_BOTH_EDGE=1 ADC_MAX=4095 BUS_PINS_spi4=PE13,PE14,PE12 PWM_MAX=255 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi1=PA6,PA7,PA5 RESERVE_PINS_crystal=PH0,PH1 MCU=stm32f446xx
mcu 'rpi': Starting connect
mcu 'mcu': got {'#receive_time': 410.465873333, u'next_clock': 1131155968, u'oid': 42, u'value': 31573, '#name': u'analog_in_state', '#sent_time': 410.415712499}
mcu 'mcu': got {'#receive_time': 410.665996197, u'next_clock': 1167155968, u'oid': 32, u'value': 31586, '#name': u'analog_in_state', '#sent_time': 410.415712499}
mcu 'mcu': got {'#receive_time': 410.696124062, u'next_clock': 1172555968, u'oid': 35, u'value': 7493, '#name': u'analog_in_state', '#sent_time': 410.415712499}
mcu 'mcu': got {'#receive_time': 410.706240155, u'next_clock': 1174355968, u'oid': 36, u'value': 31585, '#name': u'analog_in_state', '#sent_time': 410.415712499}
mcu 'mcu': got {'#receive_time': 410.766599426, u'next_clock': 1185155968, u'oid': 42, u'value': 31580, '#name': u'analog_in_state', '#sent_time': 410.415712499}
mcu 'mcu': got {'#receive_time': 410.966593905, u'next_clock': 1221155968, u'oid': 32, u'value': 31580, '#name': u'analog_in_state', '#sent_time': 410.415712499}
Loaded MCU 'rpi' 111 commands (v0.11.0-41-g9b60daf6 / gcc: (Raspbian 8.3.0-6+rpi1) 8.3.0 binutils: (GNU Binutils for Raspbian) 2.31.1)
MCU 'rpi' config: PCA9685_MAX=4096 ADC_MAX=4095 PWM_MAX=32768 CLOCK_FREQ=50000000 MCU=linux STATS_SUMSQ_BASE=256
mcu_temperature 'mcu' nominal base=-268.181818 slope=1294.861660
mcu 'mcu': got {'#receive_time': 410.996932864, u'next_clock': 1226555968, u'oid': 35, u'value': 7495, '#name': u'analog_in_state', '#sent_time': 410.993908645}
Configured MCU 'mcu' (1024 moves)
Sending MCU 'rpi' printer configuration...
Configured MCU 'rpi' (1024 moves)
Starting heater checks for extruder
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (40.0, 20.2)    | (40.0, 40.0)
  1   | (61.2, 20.2)    | (61.2, 40.0)
  2   | (82.5, 20.2)    | (82.5, 40.0)
  3   | (103.8, 20.2)   | (103.8, 40.0)
  4   | (125.0, 20.2)   | (125.0, 40.0)
  5   | (146.2, 20.2)   | (146.2, 40.0)
  6   | (167.5, 20.2)   | (167.5, 40.0)
  7   | (188.8, 20.2)   | (188.8, 40.0)
  8   | (210.0, 20.2)   | (210.0, 40.0)
  9   | (210.0, 41.5)   | (210.0, 61.2)
  10  | (188.8, 41.5)   | (188.8, 61.2)
  11  | (167.5, 41.5)   | (167.5, 61.2)
  12  | (146.2, 41.5)   | (146.2, 61.2)
  13  | (125.0, 41.5)   | (125.0, 61.2)
  14  | (103.8, 41.5)   | (103.8, 61.2)
  15  | (82.5, 41.5)    | (82.5, 61.2)
  16  | (61.2, 41.5)    | (61.2, 61.2)
  17  | (40.0, 41.5)    | (40.0, 61.2)
  18  | (40.0, 62.8)    | (40.0, 82.5)
  19  | (61.2, 62.8)    | (61.2, 82.5)
  20  | (82.5, 62.8)    | (82.5, 82.5)
  21  | (103.8, 62.8)   | (103.8, 82.5)
  22  | (125.0, 62.8)   | (125.0, 82.5)
  23  | (146.2, 62.8)   | (146.2, 82.5)
  24  | (167.5, 62.8)   | (167.5, 82.5)
  25  | (188.8, 62.8)   | (188.8, 82.5)
  26  | (210.0, 62.8)   | (210.0, 82.5)
  27  | (210.0, 84.0)   | (210.0, 103.8)
  28  | (188.8, 84.0)   | (188.8, 103.8)
  29  | (167.5, 84.0)   | (167.5, 103.8)
  30  | (146.2, 84.0)   | (146.2, 103.8)
  31  | (125.0, 84.0)   | (125.0, 103.8)
  32  | (103.8, 84.0)   | (103.8, 103.8)
  33  | (82.5, 84.0)    | (82.5, 103.8)
  34  | (61.2, 84.0)    | (61.2, 103.8)
  35  | (40.0, 84.0)    | (40.0, 103.8)
  36  | (40.0, 105.2)   | (40.0, 125.0)
  37  | (61.2, 105.2)   | (61.2, 125.0)
  38  | (82.5, 105.2)   | (82.5, 125.0)
  39  | (103.8, 105.2)  | (103.8, 125.0)
  40  | (125.0, 105.2)  | (125.0, 125.0)
  41  | (146.2, 105.2)  | (146.2, 125.0)
  42  | (167.5, 105.2)  | (167.5, 125.0)
  43  | (188.8, 105.2)  | (188.8, 125.0)
  44  | (210.0, 105.2)  | (210.0, 125.0)
  45  | (210.0, 126.5)  | (210.0, 146.2)
  46  | (188.8, 126.5)  | (188.8, 146.2)
  47  | (167.5, 126.5)  | (167.5, 146.2)
  48  | (146.2, 126.5)  | (146.2, 146.2)
  49  | (125.0, 126.5)  | (125.0, 146.2)
  50  | (103.8, 126.5)  | (103.8, 146.2)
  51  | (82.5, 126.5)   | (82.5, 146.2)
  52  | (61.2, 126.5)   | (61.2, 146.2)
  53  | (40.0, 126.5)   | (40.0, 146.2)
  54  | (40.0, 147.8)   | (40.0, 167.5)
  55  | (61.2, 147.8)   | (61.2, 167.5)
  56  | (82.5, 147.8)   | (82.5, 167.5)
  57  | (103.8, 147.8)  | (103.8, 167.5)
  58  | (125.0, 147.8)  | (125.0, 167.5)
  59  | (146.2, 147.8)  | (146.2, 167.5)
  60  | (167.5, 147.8)  | (167.5, 167.5)
  61  | (188.8, 147.8)  | (188.8, 167.5)
  62  | (210.0, 147.8)  | (210.0, 167.5)
  63  | (210.0, 169.0)  | (210.0, 188.8)
  64  | (188.8, 169.0)  | (188.8, 188.8)
  65  | (167.5, 169.0)  | (167.5, 188.8)
  66  | (146.2, 169.0)  | (146.2, 188.8)
  67  | (125.0, 169.0)  | (125.0, 188.8)
  68  | (103.8, 169.0)  | (103.8, 188.8)
  69  | (82.5, 169.0)   | (82.5, 188.8)
  70  | (61.2, 169.0)   | (61.2, 188.8)
  71  | (40.0, 169.0)   | (40.0, 188.8)
  72  | (40.0, 190.2)   | (40.0, 210.0)
  73  | (61.2, 190.2)   | (61.2, 210.0)
  74  | (82.5, 190.2)   | (82.5, 210.0)
  75  | (103.8, 190.2)  | (103.8, 210.0)
  76  | (125.0, 190.2)  | (125.0, 210.0)
  77  | (146.2, 190.2)  | (146.2, 210.0)
  78  | (167.5, 190.2)  | (167.5, 210.0)
  79  | (188.8, 190.2)  | (188.8, 210.0)
  80  | (210.0, 190.2)  | (210.0, 210.0)
bed_mesh: relative_reference_index 12 is (146.25, 61.25)
webhooks: registering remote method 'shutdown_machine' for connection id: 1965818344
webhooks: registering remote method 'reboot_machine' for connection id: 1965818344
webhooks: registering remote method 'pause_job_queue' for connection id: 1965818344
webhooks: registering remote method 'start_job_queue' for connection id: 1965818344
Klipper INIT done
Stats 412.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6708 bytes_read=6870 bytes_retransmit=0 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=179999702 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=832 bytes_read=4475 bytes_retransmit=0 bytes_invalid=0 send_seq=113 receive_seq=113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999192 adj=49997784  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.67 cputime=12.131 memavail=696704 print_time=414.084 buffer_time=0.250 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 413.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=6800 bytes_read=7101 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180000916 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=838 bytes_read=4491 bytes_retransmit=0 bytes_invalid=0 send_seq=114 receive_seq=114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000874 adj=50000757  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=44.0 mcu_temp: temp=27.8 chamber: temp=19.6 sysload=1.67 cputime=12.194 memavail=696716 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 414.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=7263 bytes_read=7383 bytes_retransmit=0 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001577 rpi: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=844 bytes_read=4507 bytes_retransmit=0 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000697 adj=50001600  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.67 cputime=12.279 memavail=696748 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 415.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=7269 bytes_read=7576 bytes_retransmit=0 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001957 rpi: mcu_awake=0.004 mcu_task_avg=0.000026 mcu_task_stddev=0.000028 bytes_write=850 bytes_read=4538 bytes_retransmit=0 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999930 adj=50000611  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.67 cputime=12.346 memavail=696388 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 416.7: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000016 mcu_task_stddev=0.000037 bytes_write=7275 bytes_read=7784 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001977 rpi: mcu_awake=0.004 mcu_task_avg=0.000026 mcu_task_stddev=0.000028 bytes_write=856 bytes_read=4554 bytes_retransmit=0 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999873 adj=49998558  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=28.0 chamber: temp=19.7 sysload=1.62 cputime=12.417 memavail=696504 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 417.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=7281 bytes_read=8036 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001884 rpi: mcu_awake=0.004 mcu_task_avg=0.000026 mcu_task_stddev=0.000028 bytes_write=862 bytes_read=4570 bytes_retransmit=0 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999830 adj=49998611  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=27.8 chamber: temp=19.6 sysload=1.62 cputime=12.490 memavail=696504 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 418.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=7287 bytes_read=8229 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001920 rpi: mcu_awake=0.004 mcu_task_avg=0.000026 mcu_task_stddev=0.000028 bytes_write=868 bytes_read=4586 bytes_retransmit=0 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49998746  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=1.62 cputime=12.559 memavail=696484 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 419.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=7293 bytes_read=8437 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001946 rpi: mcu_awake=0.004 mcu_task_avg=0.000026 mcu_task_stddev=0.000028 bytes_write=874 bytes_read=4602 bytes_retransmit=0 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49998412  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.62 cputime=12.631 memavail=696508 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 420.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=7299 bytes_read=8674 bytes_retransmit=0 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002043 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=880 bytes_read=4631 bytes_retransmit=0 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49998624  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.62 cputime=12.705 memavail=696508 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 421.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000015 mcu_task_stddev=0.000038 bytes_write=7305 bytes_read=8867 bytes_retransmit=0 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001984 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=886 bytes_read=4647 bytes_retransmit=0 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49998581  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.65 cputime=12.777 memavail=695456 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 422.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7311 bytes_read=9089 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002069 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=892 bytes_read=4663 bytes_retransmit=0 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49998584  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.65 cputime=12.848 memavail=695456 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 423.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7317 bytes_read=9326 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002070 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=898 bytes_read=4679 bytes_retransmit=0 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49998692  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.65 cputime=12.920 memavail=695496 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 424.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7323 bytes_read=9519 bytes_retransmit=0 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002062 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=904 bytes_read=4695 bytes_retransmit=0 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49998765  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.65 cputime=12.986 memavail=695704 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 425.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7329 bytes_read=9727 bytes_retransmit=0 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002062 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=910 bytes_read=4724 bytes_retransmit=0 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49998828  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.65 cputime=13.055 memavail=695752 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 426.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7335 bytes_read=9964 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002063 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=916 bytes_read=4740 bytes_retransmit=0 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49998978  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=27.9 chamber: temp=19.6 sysload=1.60 cputime=13.127 memavail=695752 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 427.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7341 bytes_read=10171 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002037 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=922 bytes_read=4756 bytes_retransmit=0 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999062  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=1.60 cputime=13.194 memavail=695364 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 428.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7347 bytes_read=10365 bytes_retransmit=0 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002008 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=928 bytes_read=4772 bytes_retransmit=0 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999120  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=1.60 cputime=13.265 memavail=695508 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 429.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7353 bytes_read=10594 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001993 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=934 bytes_read=4788 bytes_retransmit=0 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999263  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.60 cputime=13.339 memavail=695508 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 430.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7359 bytes_read=10787 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001995 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=940 bytes_read=4817 bytes_retransmit=0 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999191  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=27.9 chamber: temp=19.6 sysload=1.60 cputime=13.409 memavail=695404 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 431.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7365 bytes_read=10995 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002046 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=946 bytes_read=4833 bytes_retransmit=0 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999304  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.55 cputime=13.480 memavail=696520 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 432.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7371 bytes_read=11246 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002051 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=958 bytes_read=4865 bytes_retransmit=0 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999203  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.55 cputime=13.556 memavail=696520 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 433.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7377 bytes_read=11439 bytes_retransmit=0 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002047 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=964 bytes_read=4881 bytes_retransmit=0 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999085  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.55 cputime=13.627 memavail=695708 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 434.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7383 bytes_read=11647 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002057 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=970 bytes_read=4897 bytes_retransmit=0 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999066  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.55 cputime=13.701 memavail=695776 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 435.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7389 bytes_read=11884 bytes_retransmit=0 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002054 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=976 bytes_read=4926 bytes_retransmit=0 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999021  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=1.55 cputime=13.777 memavail=695776 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 436.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7395 bytes_read=12077 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002156 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=982 bytes_read=4942 bytes_retransmit=0 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49998989  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.42 cputime=13.847 memavail=695672 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 437.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7401 bytes_read=12299 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002620 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=988 bytes_read=4958 bytes_retransmit=0 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49998850  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.42 cputime=13.918 memavail=695776 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 438.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7407 bytes_read=12536 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002514 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=994 bytes_read=4974 bytes_retransmit=0 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49997995  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.42 cputime=13.988 memavail=695776 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 439.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7413 bytes_read=12729 bytes_retransmit=0 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002451 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1000 bytes_read=4990 bytes_retransmit=0 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49998446  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.2 chamber: temp=19.6 sysload=1.42 cputime=14.056 memavail=695628 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 440.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7419 bytes_read=12937 bytes_retransmit=0 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002386 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1006 bytes_read=5019 bytes_retransmit=0 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49998831  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.2 chamber: temp=19.6 sysload=1.42 cputime=14.125 memavail=695788 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 441.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7493 bytes_read=13184 bytes_retransmit=0 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1012 bytes_read=5035 bytes_retransmit=0 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999007  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=1.31 cputime=14.198 memavail=695788 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 442.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7567 bytes_read=13387 bytes_retransmit=0 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002270 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1018 bytes_read=5051 bytes_retransmit=0 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999223  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.31 cputime=14.268 memavail=695716 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 443.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=7573 bytes_read=13610 bytes_retransmit=0 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002223 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1024 bytes_read=5067 bytes_retransmit=0 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999292  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.31 cputime=14.339 memavail=695800 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 444.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=7579 bytes_read=13847 bytes_retransmit=0 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002181 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1030 bytes_read=5083 bytes_retransmit=0 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999377  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.31 cputime=14.409 memavail=695800 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 445.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=7585 bytes_read=14040 bytes_retransmit=0 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002141 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1036 bytes_read=5112 bytes_retransmit=0 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999731 adj=49999356  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.31 cputime=14.476 memavail=695696 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 446.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=7591 bytes_read=14262 bytes_retransmit=0 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002107 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1042 bytes_read=5128 bytes_retransmit=0 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999734 adj=49999662  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.20 cputime=14.548 memavail=695804 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 447.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000016 bytes_write=7597 bytes_read=14485 bytes_retransmit=0 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002082 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1048 bytes_read=5144 bytes_retransmit=0 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999632  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=27.9 chamber: temp=19.7 sysload=1.20 cputime=14.616 memavail=695804 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 448.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7603 bytes_read=14692 bytes_retransmit=0 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002054 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1054 bytes_read=5160 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999478  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.20 cputime=14.684 memavail=695784 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 449.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7609 bytes_read=14914 bytes_retransmit=0 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002034 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1060 bytes_read=5176 bytes_retransmit=0 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999409  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=27.9 chamber: temp=19.6 sysload=1.20 cputime=14.757 memavail=695816 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 450.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7615 bytes_read=15137 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002029 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1066 bytes_read=5205 bytes_retransmit=0 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999451  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.5 sysload=1.20 cputime=14.832 memavail=695816 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 451.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7621 bytes_read=15329 bytes_retransmit=0 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002035 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1072 bytes_read=5221 bytes_retransmit=0 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999369  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=1.11 cputime=14.900 memavail=695496 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 452.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7627 bytes_read=15537 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002012 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1078 bytes_read=5237 bytes_retransmit=0 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999242  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=1.11 cputime=14.969 memavail=695568 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 453.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7633 bytes_read=15768 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002018 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1084 bytes_read=5253 bytes_retransmit=0 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999218  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.11 cputime=15.045 memavail=695568 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 454.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7639 bytes_read=15961 bytes_retransmit=0 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002010 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000022 bytes_write=1090 bytes_read=5269 bytes_retransmit=0 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999152  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=1.11 cputime=15.115 memavail=695516 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 455.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7645 bytes_read=16183 bytes_retransmit=0 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180002005 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1096 bytes_read=5298 bytes_retransmit=0 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999130  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=1.11 cputime=15.190 memavail=695580 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 456.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7651 bytes_read=16406 bytes_retransmit=0 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001991 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1102 bytes_read=5314 bytes_retransmit=0 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999157  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=1.02 cputime=15.258 memavail=695580 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 457.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=7663 bytes_read=16615 bytes_retransmit=0 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001967 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1108 bytes_read=5330 bytes_retransmit=0 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999111  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.02 cputime=15.331 memavail=695476 print_time=414.084 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Z not homed, forcing full G28
Homing X
Homing Y
Homing Z
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
SET_KINEMATIC_POSITION pos=0.000,0.000,0.000
Stats 458.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=10397 bytes_read=17916 bytes_retransmit=0 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001936 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1114 bytes_read=5346 bytes_retransmit=0 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999168  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=27.9 chamber: temp=19.8 sysload=1.02 cputime=15.713 memavail=695588 print_time=461.880 buffer_time=2.011 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 459.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=10724 bytes_read=18200 bytes_retransmit=0 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001928 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1120 bytes_read=5362 bytes_retransmit=0 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999147  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=1.02 cputime=15.794 memavail=695588 print_time=461.880 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 460.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=11500 bytes_read=19066 bytes_retransmit=0 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001920 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1126 bytes_read=5391 bytes_retransmit=0 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999140  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.02 cputime=15.962 memavail=695372 print_time=462.080 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 461.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=12200 bytes_read=19846 bytes_retransmit=0 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001910 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1132 bytes_read=5407 bytes_retransmit=0 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999161  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=1.02 cputime=16.111 memavail=695592 print_time=463.080 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 462.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=13276 bytes_read=20667 bytes_retransmit=0 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001899 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1138 bytes_read=5423 bytes_retransmit=0 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999168  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.2 chamber: temp=19.7 sysload=1.02 cputime=16.267 memavail=695592 print_time=464.086 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 463.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=14681 bytes_read=21512 bytes_retransmit=0 bytes_invalid=0 send_seq=643 receive_seq=643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001879 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1144 bytes_read=5439 bytes_retransmit=0 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999204  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.2 chamber: temp=19.5 sysload=1.02 cputime=16.415 memavail=695596 print_time=465.050 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 464.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=15425 bytes_read=22269 bytes_retransmit=0 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001863 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1150 bytes_read=5455 bytes_retransmit=0 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999196  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=1.02 cputime=16.567 memavail=695596 print_time=466.050 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 465.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=16394 bytes_read=23088 bytes_retransmit=0 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1156 bytes_read=5484 bytes_retransmit=0 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999357  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=1.02 cputime=16.732 memavail=695596 print_time=467.080 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 466.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=17365 bytes_read=23801 bytes_retransmit=0 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001863 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1162 bytes_read=5500 bytes_retransmit=0 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999292  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.93 cputime=16.895 memavail=695272 print_time=467.937 buffer_time=0.063 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 467.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=18985 bytes_read=24455 bytes_retransmit=0 bytes_invalid=0 send_seq=812 receive_seq=811 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001854 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1168 bytes_read=5516 bytes_retransmit=0 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999228  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.2 chamber: temp=19.7 sysload=0.93 cputime=17.118 memavail=695352 print_time=469.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 468.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=19766 bytes_read=25193 bytes_retransmit=0 bytes_invalid=0 send_seq=852 receive_seq=851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001847 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1174 bytes_read=5532 bytes_retransmit=0 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999163  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.93 cputime=17.266 memavail=695352 print_time=470.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 469.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=20559 bytes_read=25920 bytes_retransmit=0 bytes_invalid=0 send_seq=893 receive_seq=892 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1180 bytes_read=5548 bytes_retransmit=0 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999181  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.93 cputime=17.421 memavail=695648 print_time=471.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 470.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=21340 bytes_read=26672 bytes_retransmit=0 bytes_invalid=0 send_seq=933 receive_seq=932 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001842 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1186 bytes_read=5577 bytes_retransmit=0 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999187  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.93 cputime=17.571 memavail=695608 print_time=472.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 471.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=22237 bytes_read=27568 bytes_retransmit=0 bytes_invalid=0 send_seq=984 receive_seq=983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001840 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1192 bytes_read=5593 bytes_retransmit=0 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999183  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.86 cputime=17.736 memavail=695364 print_time=473.084 buffer_time=0.208 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 472.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=23945 bytes_read=28178 bytes_retransmit=0 bytes_invalid=0 send_seq=1024 receive_seq=1023 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001851 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1198 bytes_read=5609 bytes_retransmit=0 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999199  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.2 chamber: temp=19.7 sysload=0.86 cputime=17.871 memavail=695260 print_time=474.045 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 473.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=26180 bytes_read=29184 bytes_retransmit=0 bytes_invalid=0 send_seq=1090 receive_seq=1090 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1204 bytes_read=5625 bytes_retransmit=0 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999170  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.86 cputime=18.133 memavail=695364 print_time=477.106 buffer_time=2.226 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 474.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=26481 bytes_read=29637 bytes_retransmit=0 bytes_invalid=0 send_seq=1104 receive_seq=1104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001842 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1210 bytes_read=5641 bytes_retransmit=0 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999179  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.0 chamber: temp=19.5 sysload=0.86 cputime=18.212 memavail=695364 print_time=477.106 buffer_time=1.218 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 475.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=26763 bytes_read=30076 bytes_retransmit=0 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1216 bytes_read=5670 bytes_retransmit=0 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999141  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.3 chamber: temp=19.5 sysload=0.86 cputime=18.327 memavail=694992 print_time=477.106 buffer_time=0.214 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 476.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27075 bytes_read=30578 bytes_retransmit=0 bytes_invalid=0 send_seq=1136 receive_seq=1136 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1222 bytes_read=5686 bytes_retransmit=0 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999157  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.79 cputime=18.608 memavail=695116 print_time=477.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 477.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000007 mcu_task_stddev=0.000006 bytes_write=27738 bytes_read=31065 bytes_retransmit=0 bytes_invalid=0 send_seq=1157 receive_seq=1157 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1228 bytes_read=5702 bytes_retransmit=0 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999065  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=27.9 chamber: temp=19.6 sysload=0.79 cputime=18.726 memavail=695116 print_time=477.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 478.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=27884 bytes_read=31503 bytes_retransmit=0 bytes_invalid=0 send_seq=1168 receive_seq=1168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001865 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1234 bytes_read=5718 bytes_retransmit=0 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999093  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.9 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.79 cputime=18.830 memavail=695052 print_time=477.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 479.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=28030 bytes_read=31970 bytes_retransmit=0 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1240 bytes_read=5734 bytes_retransmit=0 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999126  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=27.9 chamber: temp=19.6 sysload=0.79 cputime=18.935 memavail=695128 print_time=477.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 480.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=28176 bytes_read=32408 bytes_retransmit=0 bytes_invalid=0 send_seq=1190 receive_seq=1190 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001859 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1246 bytes_read=5762 bytes_retransmit=0 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999135  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=0.79 cputime=19.041 memavail=695128 print_time=477.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 481.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=28322 bytes_read=32831 bytes_retransmit=0 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1252 bytes_read=5776 bytes_retransmit=0 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999154  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=27.9 chamber: temp=19.7 sysload=0.73 cputime=19.147 memavail=695632 print_time=477.847 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 482.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000024 bytes_write=30620 bytes_read=33478 bytes_retransmit=0 bytes_invalid=0 send_seq=1248 receive_seq=1248 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001853 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1258 bytes_read=5791 bytes_retransmit=0 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999130  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.0 chamber: temp=19.7 sysload=0.73 cputime=19.308 memavail=695640 print_time=485.068 buffer_time=1.161 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 483.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=30766 bytes_read=33931 bytes_retransmit=0 bytes_invalid=0 send_seq=1259 receive_seq=1259 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1264 bytes_read=5806 bytes_retransmit=0 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999129  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.73 cputime=19.399 memavail=695640 print_time=485.068 buffer_time=0.160 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 484.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=30912 bytes_read=34354 bytes_retransmit=0 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001854 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1270 bytes_read=5821 bytes_retransmit=0 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999092  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.73 cputime=19.512 memavail=695644 print_time=485.068 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 485.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=31552 bytes_read=34866 bytes_retransmit=0 bytes_invalid=0 send_seq=1290 receive_seq=1290 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001858 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1276 bytes_read=5836 bytes_retransmit=0 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999100  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.73 cputime=19.637 memavail=695644 print_time=485.068 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 486.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=31698 bytes_read=35304 bytes_retransmit=0 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001865 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1282 bytes_read=5865 bytes_retransmit=0 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999082  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=27.9 chamber: temp=19.8 sysload=0.75 cputime=19.746 memavail=695644 print_time=485.068 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 487.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=33785 bytes_read=35887 bytes_retransmit=0 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001868 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1288 bytes_read=5881 bytes_retransmit=0 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999071  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=27.9 chamber: temp=19.5 sysload=0.75 cputime=19.912 memavail=695584 print_time=490.312 buffer_time=1.402 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 488.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=33999 bytes_read=36379 bytes_retransmit=0 bytes_invalid=0 send_seq=1357 receive_seq=1357 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001870 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1294 bytes_read=5897 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999130  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=0.75 cputime=20.027 memavail=695656 print_time=490.312 buffer_time=0.401 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 489.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=34213 bytes_read=36827 bytes_retransmit=0 bytes_invalid=0 send_seq=1370 receive_seq=1370 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001874 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1300 bytes_read=5913 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999110  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=27.9 chamber: temp=19.7 sysload=0.75 cputime=20.133 memavail=695656 print_time=490.312 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 490.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=34853 bytes_read=37295 bytes_retransmit=0 bytes_invalid=0 send_seq=1390 receive_seq=1390 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001866 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1306 bytes_read=5929 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999101  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.0 chamber: temp=19.7 sysload=0.75 cputime=20.232 memavail=695656 print_time=490.312 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 491.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=34999 bytes_read=37762 bytes_retransmit=0 bytes_invalid=0 send_seq=1401 receive_seq=1401 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1312 bytes_read=5958 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999157  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=0.77 cputime=20.322 memavail=695404 print_time=490.312 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 492.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=35145 bytes_read=38200 bytes_retransmit=0 bytes_invalid=0 send_seq=1412 receive_seq=1412 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1318 bytes_read=5974 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999178  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.0 chamber: temp=19.7 sysload=0.77 cputime=20.422 memavail=695404 print_time=490.312 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Heater extruder approaching new target of 220.000
Stats 493.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=35957 bytes_read=38703 bytes_retransmit=0 bytes_invalid=0 send_seq=1436 receive_seq=1436 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001865 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1324 bytes_read=5990 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999238  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.2 chamber: temp=19.6 sysload=0.77 cputime=20.545 memavail=695300 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=20.3 pwm=1.000
Stats 494.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=36608 bytes_read=39215 bytes_retransmit=0 bytes_invalid=0 send_seq=1456 receive_seq=1456 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001870 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1336 bytes_read=6022 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999248  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.0 chamber: temp=19.7 sysload=0.77 cputime=20.665 memavail=695416 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=21.0 pwm=1.000
Stats 495.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=36803 bytes_read=39658 bytes_retransmit=0 bytes_invalid=0 send_seq=1468 receive_seq=1468 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001868 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1342 bytes_read=6038 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999239  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.77 cputime=20.770 memavail=695416 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=24.5 pwm=1.000
Stats 496.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=37030 bytes_read=40096 bytes_retransmit=0 bytes_invalid=0 send_seq=1482 receive_seq=1482 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001868 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1348 bytes_read=6067 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999234  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=0.79 cputime=20.871 memavail=695312 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=28.9 pwm=1.000
Stats 497.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000022 bytes_write=37290 bytes_read=40583 bytes_retransmit=0 bytes_invalid=0 send_seq=1497 receive_seq=1497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001866 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1354 bytes_read=6083 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999205  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.79 cputime=20.983 memavail=695416 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=34.0 pwm=1.000
Stats 498.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=37558 bytes_read=41056 bytes_retransmit=0 bytes_invalid=0 send_seq=1512 receive_seq=1512 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001866 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1360 bytes_read=6099 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999215  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=27.9 chamber: temp=19.6 sysload=0.79 cputime=21.092 memavail=695416 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=41.2 pwm=1.000
Stats 499.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=37823 bytes_read=41489 bytes_retransmit=0 bytes_invalid=0 send_seq=1526 receive_seq=1526 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001866 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1366 bytes_read=6115 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999213  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.79 cputime=21.199 memavail=695428 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=46.5 pwm=1.000
Stats 500.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=38072 bytes_read=41955 bytes_retransmit=0 bytes_invalid=0 send_seq=1540 receive_seq=1540 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001868 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1372 bytes_read=6131 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999191  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.79 cputime=21.303 memavail=695428 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=51.8 pwm=1.000
Stats 501.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=38353 bytes_read=42413 bytes_retransmit=0 bytes_invalid=0 send_seq=1555 receive_seq=1555 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001885 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1378 bytes_read=6160 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999178  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.81 cputime=21.408 memavail=695932 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=58.4 pwm=1.000
Stats 502.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000013 mcu_task_stddev=0.000031 bytes_write=38597 bytes_read=42851 bytes_retransmit=0 bytes_invalid=0 send_seq=1569 receive_seq=1569 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001884 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1384 bytes_read=6176 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999102  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.5 sysload=0.81 cputime=21.516 memavail=695828 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=63.1 pwm=1.000
Stats 503.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=38870 bytes_read=43353 bytes_retransmit=0 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001882 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1390 bytes_read=6192 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999118  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.81 cputime=21.626 memavail=695940 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=67.7 pwm=1.000
Stats 504.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=39114 bytes_read=43806 bytes_retransmit=0 bytes_invalid=0 send_seq=1598 receive_seq=1598 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001877 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1396 bytes_read=6208 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999164  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.81 cputime=21.733 memavail=695940 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=73.6 pwm=1.000
Stats 505.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=39459 bytes_read=44259 bytes_retransmit=0 bytes_invalid=0 send_seq=1615 receive_seq=1615 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001875 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1402 bytes_read=6224 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999241  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.0 chamber: temp=19.7 sysload=0.81 cputime=21.838 memavail=695836 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=77.8 pwm=1.000
Stats 506.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=39771 bytes_read=44746 bytes_retransmit=0 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001868 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1408 bytes_read=6253 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999229  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.0 chamber: temp=19.6 sysload=0.82 cputime=21.950 memavail=695944 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=81.9 pwm=1.000
Stats 507.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=40041 bytes_read=45204 bytes_retransmit=0 bytes_invalid=0 send_seq=1645 receive_seq=1645 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001859 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1414 bytes_read=6269 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999253  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.82 cputime=22.058 memavail=695944 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=87.2 pwm=1.000
Stats 508.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=40289 bytes_read=45657 bytes_retransmit=0 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001856 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1420 bytes_read=6285 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999277  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.2 chamber: temp=19.6 sysload=0.82 cputime=22.163 memavail=695956 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=91.0 pwm=1.000
Stats 509.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=40548 bytes_read=46139 bytes_retransmit=0 bytes_invalid=0 send_seq=1673 receive_seq=1673 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001853 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1426 bytes_read=6301 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999267  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.1 chamber: temp=19.6 sysload=0.82 cputime=22.273 memavail=695956 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=94.8 pwm=1.000
Stats 510.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=40808 bytes_read=46592 bytes_retransmit=0 bytes_invalid=0 send_seq=1687 receive_seq=1687 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1432 bytes_read=6317 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999248  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.3 chamber: temp=19.6 sysload=0.82 cputime=22.378 memavail=695956 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=99.7 pwm=1.000
Stats 511.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=41056 bytes_read=47030 bytes_retransmit=0 bytes_invalid=0 send_seq=1701 receive_seq=1701 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1438 bytes_read=6346 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999225  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.1 chamber: temp=19.7 sysload=0.84 cputime=22.492 memavail=695152 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=103.3 pwm=1.000
Stats 512.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=41364 bytes_read=47517 bytes_retransmit=0 bytes_invalid=0 send_seq=1716 receive_seq=1716 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1444 bytes_read=6362 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999161  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=41.3 mcu_temp: temp=28.2 chamber: temp=19.6 sysload=0.84 cputime=22.608 memavail=695200 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=106.9 pwm=1.000
Stats 513.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=41586 bytes_read=47985 bytes_retransmit=0 bytes_invalid=0 send_seq=1730 receive_seq=1730 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001867 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1450 bytes_read=6378 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999175  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.3 chamber: temp=19.5 sysload=0.84 cputime=22.720 memavail=695204 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=111.5 pwm=1.000
Stats 514.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=41862 bytes_read=48423 bytes_retransmit=0 bytes_invalid=0 send_seq=1744 receive_seq=1744 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001859 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1456 bytes_read=6394 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999108  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.3 chamber: temp=19.6 sysload=0.84 cputime=22.826 memavail=695100 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=114.9 pwm=1.000
Stats 515.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=42111 bytes_read=48905 bytes_retransmit=0 bytes_invalid=0 send_seq=1758 receive_seq=1758 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001865 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=1462 bytes_read=6410 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999134  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.3 chamber: temp=19.6 sysload=0.84 cputime=22.934 memavail=695212 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=118.3 pwm=1.000
Stats 516.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=42360 bytes_read=49358 bytes_retransmit=0 bytes_invalid=0 send_seq=1772 receive_seq=1772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1468 bytes_read=6439 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999104  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.2 chamber: temp=19.7 sysload=0.85 cputime=23.046 memavail=695212 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=122.7 pwm=1.000
Stats 517.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=42626 bytes_read=49798 bytes_retransmit=0 bytes_invalid=0 send_seq=1787 receive_seq=1787 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1474 bytes_read=6455 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999123  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.3 chamber: temp=19.6 sysload=0.85 cputime=23.152 memavail=695408 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=126.0 pwm=1.000
Stats 518.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=42886 bytes_read=50297 bytes_retransmit=0 bytes_invalid=0 send_seq=1802 receive_seq=1802 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1480 bytes_read=6471 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999112  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.2 chamber: temp=19.6 sysload=0.85 cputime=23.264 memavail=695464 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=130.3 pwm=1.000
Stats 519.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=43123 bytes_read=50746 bytes_retransmit=0 bytes_invalid=0 send_seq=1816 receive_seq=1816 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001866 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1486 bytes_read=6487 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999213  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.3 chamber: temp=19.7 sysload=0.85 cputime=23.377 memavail=695464 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=133.5 pwm=1.000
Stats 520.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=43378 bytes_read=51212 bytes_retransmit=0 bytes_invalid=0 send_seq=1831 receive_seq=1831 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1492 bytes_read=6503 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999210  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.3 chamber: temp=19.7 sysload=0.85 cputime=23.495 memavail=695360 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=136.6 pwm=1.000
Stats 521.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=43600 bytes_read=51690 bytes_retransmit=0 bytes_invalid=0 send_seq=1845 receive_seq=1845 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001854 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1498 bytes_read=6532 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999320  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.3 chamber: temp=19.6 sysload=0.86 cputime=23.606 memavail=696232 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=140.7 pwm=1.000
Stats 522.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=43850 bytes_read=52125 bytes_retransmit=0 bytes_invalid=0 send_seq=1859 receive_seq=1859 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001851 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1504 bytes_read=6548 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999301  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.3 chamber: temp=19.7 sysload=0.86 cputime=23.717 memavail=695420 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=143.8 pwm=1.000
Stats 523.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44099 bytes_read=52580 bytes_retransmit=0 bytes_invalid=0 send_seq=1873 receive_seq=1873 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001850 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1510 bytes_read=6564 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999270  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.3 chamber: temp=19.6 sysload=0.86 cputime=23.797 memavail=695732 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=146.8 pwm=1.000
Stats 524.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44321 bytes_read=53046 bytes_retransmit=0 bytes_invalid=0 send_seq=1887 receive_seq=1887 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1516 bytes_read=6580 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999276  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.3 chamber: temp=19.7 sysload=0.86 cputime=23.903 memavail=695732 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=150.8 pwm=1.000
Stats 525.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44560 bytes_read=53481 bytes_retransmit=0 bytes_invalid=0 send_seq=1901 receive_seq=1901 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1522 bytes_read=6596 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999297  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.4 chamber: temp=19.6 sysload=0.86 cputime=24.009 memavail=695732 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=153.7 pwm=1.000
Stats 526.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=44825 bytes_read=53936 bytes_retransmit=0 bytes_invalid=0 send_seq=1916 receive_seq=1916 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001846 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1528 bytes_read=6625 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999335  heater_bed: target=0 temp=19.5 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.4 chamber: temp=19.7 sysload=0.87 cputime=24.121 memavail=695652 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=156.6 pwm=1.000
Stats 527.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=45110 bytes_read=54419 bytes_retransmit=0 bytes_invalid=0 send_seq=1931 receive_seq=1931 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1534 bytes_read=6641 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999390  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.4 chamber: temp=19.7 sysload=0.87 cputime=24.235 memavail=695740 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=160.5 pwm=1.000
Stats 528.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=45424 bytes_read=54879 bytes_retransmit=0 bytes_invalid=0 send_seq=1947 receive_seq=1947 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1540 bytes_read=6657 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999356  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.4 chamber: temp=19.7 sysload=0.87 cputime=24.345 memavail=695740 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=163.3 pwm=1.000
Stats 529.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=45673 bytes_read=55329 bytes_retransmit=0 bytes_invalid=0 send_seq=1961 receive_seq=1961 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001856 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1546 bytes_read=6673 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999347  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.6 chamber: temp=19.8 sysload=0.87 cputime=24.453 memavail=695336 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=166.1 pwm=1.000
Stats 530.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=45895 bytes_read=55807 bytes_retransmit=0 bytes_invalid=0 send_seq=1975 receive_seq=1975 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001858 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1552 bytes_read=6689 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999720 adj=49999357  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.5 chamber: temp=19.7 sysload=0.87 cputime=24.565 memavail=695492 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=169.8 pwm=1.000
Stats 531.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=46127 bytes_read=56242 bytes_retransmit=0 bytes_invalid=0 send_seq=1989 receive_seq=1989 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001851 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1558 bytes_read=6718 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999722 adj=49999397  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.4 chamber: temp=19.6 sysload=0.88 cputime=24.655 memavail=695988 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=172.5 pwm=1.000
Stats 532.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=46395 bytes_read=56697 bytes_retransmit=0 bytes_invalid=0 send_seq=2004 receive_seq=2004 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1564 bytes_read=6734 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999740 adj=49999405  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.6 chamber: temp=19.6 sysload=0.88 cputime=24.767 memavail=695964 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=175.2 pwm=1.000
Stats 533.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=46644 bytes_read=57190 bytes_retransmit=0 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001851 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1570 bytes_read=6750 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999746 adj=49999629  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.5 chamber: temp=19.6 sysload=0.88 cputime=24.875 memavail=695988 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=178.8 pwm=1.000
Stats 534.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=46893 bytes_read=57625 bytes_retransmit=0 bytes_invalid=0 send_seq=2032 receive_seq=2032 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001847 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1576 bytes_read=6766 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999749 adj=49999607  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.6 chamber: temp=19.7 sysload=0.88 cputime=24.979 memavail=696004 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=181.4 pwm=1.000
Stats 535.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=47163 bytes_read=58075 bytes_retransmit=0 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=1582 bytes_read=6782 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999756 adj=49999582  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.7 chamber: temp=19.7 sysload=0.88 cputime=25.095 memavail=695696 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=184.1 pwm=1.000
Stats 536.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=47412 bytes_read=58553 bytes_retransmit=0 bytes_invalid=0 send_seq=2060 receive_seq=2060 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001848 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1588 bytes_read=6811 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999759 adj=49999610  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.6 chamber: temp=19.7 sysload=0.89 cputime=25.200 memavail=695756 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=187.5 pwm=1.000
Stats 537.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=47660 bytes_read=58988 bytes_retransmit=0 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1594 bytes_read=6827 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999763 adj=49999544  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.6 chamber: temp=19.7 sysload=0.89 cputime=25.304 memavail=695756 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=190.1 pwm=1.000
Stats 538.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=47915 bytes_read=59453 bytes_retransmit=0 bytes_invalid=0 send_seq=2088 receive_seq=2088 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1600 bytes_read=6843 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999767 adj=49999546  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.7 chamber: temp=19.7 sysload=0.89 cputime=25.415 memavail=695664 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=192.6 pwm=1.000
Stats 539.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=48126 bytes_read=59926 bytes_retransmit=0 bytes_invalid=0 send_seq=2101 receive_seq=2101 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001836 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1606 bytes_read=6859 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999771 adj=49999550  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.6 chamber: temp=19.8 sysload=0.89 cputime=25.521 memavail=695768 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=196.0 pwm=1.000
Stats 540.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=48374 bytes_read=60361 bytes_retransmit=0 bytes_invalid=0 send_seq=2115 receive_seq=2115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001833 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=1612 bytes_read=6875 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999775 adj=49999546  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.7 chamber: temp=19.6 sysload=0.89 cputime=25.625 memavail=695768 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=198.5 pwm=1.000
Stats 541.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=48618 bytes_read=60806 bytes_retransmit=0 bytes_invalid=0 send_seq=2128 receive_seq=2128 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001830 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1618 bytes_read=6904 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999777 adj=49999551  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.7 chamber: temp=19.7 sysload=0.90 cputime=25.719 memavail=695768 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=200.9 pwm=1.000
Stats 542.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=48930 bytes_read=61289 bytes_retransmit=0 bytes_invalid=0 send_seq=2143 receive_seq=2143 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001827 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1624 bytes_read=6920 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999781 adj=49999542  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.7 chamber: temp=19.6 sysload=0.90 cputime=25.833 memavail=695768 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.2 pwm=1.000
Stats 543.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=49195 bytes_read=61744 bytes_retransmit=0 bytes_invalid=0 send_seq=2158 receive_seq=2158 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001820 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1630 bytes_read=6936 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999793 adj=49999546  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.7 chamber: temp=19.7 sysload=0.90 cputime=25.947 memavail=695768 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=206.6 pwm=1.000
Stats 544.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=49466 bytes_read=62199 bytes_retransmit=0 bytes_invalid=0 send_seq=2173 receive_seq=2173 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001819 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1636 bytes_read=6952 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999799 adj=49999687  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.8 chamber: temp=19.6 sysload=0.90 cputime=26.053 memavail=695560 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=208.9 pwm=0.845
Stats 545.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=49714 bytes_read=62682 bytes_retransmit=0 bytes_invalid=0 send_seq=2188 receive_seq=2188 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001818 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1642 bytes_read=6968 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999805 adj=49999682  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.8 chamber: temp=19.7 sysload=0.90 cputime=26.165 memavail=695780 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.0 pwm=0.642
Stats 546.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=50020 bytes_read=63127 bytes_retransmit=0 bytes_invalid=0 send_seq=2204 receive_seq=2204 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001816 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=1648 bytes_read=6997 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999817 adj=49999674  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=28.8 chamber: temp=19.6 sysload=0.91 cputime=26.281 memavail=695780 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.2 pwm=0.507
Stats 547.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=50236 bytes_read=63567 bytes_retransmit=0 bytes_invalid=0 send_seq=2218 receive_seq=2218 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001815 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=1654 bytes_read=7013 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999825 adj=49999775  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.8 chamber: temp=19.7 sysload=0.91 cputime=26.401 memavail=695448 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.0 pwm=0.452
Heater extruder within range of 220.000
Stats 548.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=52316 bytes_read=64239 bytes_retransmit=0 bytes_invalid=0 send_seq=2266 receive_seq=2266 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001815 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=1660 bytes_read=7029 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999832 adj=49999781  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=28.8 chamber: temp=19.7 sysload=0.91 cputime=26.575 memavail=695512 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.8 pwm=0.399
Stats 549.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54175 bytes_read=65044 bytes_retransmit=0 bytes_invalid=0 send_seq=2322 receive_seq=2322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001809 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=1666 bytes_read=7045 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999836 adj=49999777  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.0 chamber: temp=19.9 sysload=0.91 cputime=26.711 memavail=695512 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.7 pwm=0.458
Stats 550.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=54445 bytes_read=65549 bytes_retransmit=0 bytes_invalid=0 send_seq=2339 receive_seq=2339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001806 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000023 bytes_write=1672 bytes_read=7061 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999840 adj=49999744  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.9 chamber: temp=19.7 sysload=0.91 cputime=26.824 memavail=695408 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.2 pwm=0.458
Stats 551.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56226 bytes_read=66182 bytes_retransmit=0 bytes_invalid=0 send_seq=2380 receive_seq=2380 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001810 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1678 bytes_read=7090 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999846 adj=49999716  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.9 chamber: temp=19.7 sysload=0.84 cputime=26.979 memavail=695760 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.527
Stats 552.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=56620 bytes_read=66742 bytes_retransmit=0 bytes_invalid=0 send_seq=2403 receive_seq=2403 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001809 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1684 bytes_read=7106 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999852 adj=49999689  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=28.9 chamber: temp=19.5 sysload=0.84 cputime=27.099 memavail=695776 print_time=494.373 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.527
Stats 553.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=56782 bytes_read=67224 bytes_retransmit=0 bytes_invalid=0 send_seq=2416 receive_seq=2416 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001815 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1690 bytes_read=7122 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999858 adj=49999710  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.1 chamber: temp=19.6 sysload=0.84 cputime=27.215 memavail=695680 print_time=554.454 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.527
Stats 554.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=56944 bytes_read=67692 bytes_retransmit=0 bytes_invalid=0 send_seq=2428 receive_seq=2428 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001816 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1696 bytes_read=7138 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999866 adj=49999677  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.0 chamber: temp=19.7 sysload=0.84 cputime=27.316 memavail=695680 print_time=555.455 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.380
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
Stats 555.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=57756 bytes_read=68499 bytes_retransmit=0 bytes_invalid=0 send_seq=2464 receive_seq=2464 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001810 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1702 bytes_read=7154 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999871 adj=49999718  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.0 chamber: temp=19.7 sysload=0.84 cputime=27.455 memavail=695780 print_time=559.852 buffer_time=2.897 print_stall=0 extruder: target=220 temp=221.0 pwm=0.380
Pausing toolhead to calculate extruder phase offset
Stats 556.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=58427 bytes_read=69020 bytes_retransmit=0 bytes_invalid=0 send_seq=2485 receive_seq=2485 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001810 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1714 bytes_read=7199 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999880 adj=49999428  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.8 mcu_temp: temp=29.1 chamber: temp=19.7 sysload=0.77 cputime=27.633 memavail=695676 print_time=561.990 buffer_time=4.036 print_stall=0 extruder: target=220 temp=221.4 pwm=0.315
Stats 557.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000023 mcu_task_stddev=0.000047 bytes_write=58647 bytes_read=69534 bytes_retransmit=0 bytes_invalid=0 send_seq=2499 receive_seq=2499 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001809 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1720 bytes_read=7215 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999887 adj=49999469  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.1 chamber: temp=19.7 sysload=0.77 cputime=27.746 memavail=695788 print_time=561.990 buffer_time=3.036 print_stall=0 extruder: target=220 temp=221.7 pwm=0.256
Stats 558.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=58821 bytes_read=70015 bytes_retransmit=0 bytes_invalid=0 send_seq=2512 receive_seq=2512 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001808 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1726 bytes_read=7231 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999893 adj=49999520  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=29.2 chamber: temp=19.8 sysload=0.77 cputime=27.849 memavail=695788 print_time=561.990 buffer_time=2.035 print_stall=0 extruder: target=220 temp=221.7 pwm=0.256
Stats 559.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=58995 bytes_read=70496 bytes_retransmit=0 bytes_invalid=0 send_seq=2525 receive_seq=2525 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001807 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1732 bytes_read=7247 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999900 adj=49999567  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.1 chamber: temp=19.9 sysload=0.77 cputime=27.955 memavail=695684 print_time=561.990 buffer_time=1.035 print_stall=0 extruder: target=220 temp=221.7 pwm=0.256
Stats 560.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=59185 bytes_read=71010 bytes_retransmit=0 bytes_invalid=0 send_seq=2539 receive_seq=2539 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001807 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=1738 bytes_read=7263 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999906 adj=49999616  heater_bed: target=0 temp=19.6 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.1 chamber: temp=19.8 sysload=0.77 cputime=28.068 memavail=695792 print_time=561.990 buffer_time=0.034 print_stall=0 extruder: target=220 temp=221.3 pwm=0.370
Stats 561.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=59384 bytes_read=71499 bytes_retransmit=0 bytes_invalid=0 send_seq=2553 receive_seq=2553 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001807 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1744 bytes_read=7292 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999914 adj=49999656  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.3 chamber: temp=19.7 sysload=0.71 cputime=28.187 memavail=695548 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.370
Stats 562.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000005 bytes_write=59574 bytes_read=71999 bytes_retransmit=0 bytes_invalid=0 send_seq=2567 receive_seq=2567 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001805 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1750 bytes_read=7308 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999921 adj=49999709  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.3 chamber: temp=19.6 sysload=0.71 cputime=28.299 memavail=695444 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.453
Stats 563.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=59927 bytes_read=72824 bytes_retransmit=0 bytes_invalid=0 send_seq=2601 receive_seq=2601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001796 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1756 bytes_read=7324 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999926 adj=49999769  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.1 chamber: temp=19.7 sysload=0.71 cputime=28.450 memavail=695548 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.392
Stats 564.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=60229 bytes_read=73530 bytes_retransmit=0 bytes_invalid=0 send_seq=2630 receive_seq=2630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001789 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1762 bytes_read=7340 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999931 adj=49999839  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.71 cputime=28.591 memavail=695548 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.392
Stats 565.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=60475 bytes_read=74150 bytes_retransmit=0 bytes_invalid=0 send_seq=2651 receive_seq=2651 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001783 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=1768 bytes_read=7355 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999935 adj=49999905  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.6 sysload=0.71 cputime=28.707 memavail=695444 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.312
Stats 566.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=60673 bytes_read=74650 bytes_retransmit=0 bytes_invalid=0 send_seq=2666 receive_seq=2666 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001779 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1774 bytes_read=7383 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999940 adj=49999982  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.65 cputime=28.813 memavail=695552 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.261
Stats 567.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=60847 bytes_read=75116 bytes_retransmit=0 bytes_invalid=0 send_seq=2679 receive_seq=2679 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001780 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1780 bytes_read=7398 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999943 adj=50000065  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.65 cputime=28.912 memavail=695552 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.261
Stats 568.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=61021 bytes_read=75641 bytes_retransmit=0 bytes_invalid=0 send_seq=2692 receive_seq=2692 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001777 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1786 bytes_read=7413 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999948 adj=49999979  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.65 cputime=29.012 memavail=695448 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.261
Stats 569.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=61195 bytes_read=76121 bytes_retransmit=0 bytes_invalid=0 send_seq=2705 receive_seq=2705 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001770 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1792 bytes_read=7428 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999954 adj=49999931  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=29.3 chamber: temp=19.6 sysload=0.65 cputime=29.113 memavail=695448 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.261
Stats 570.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=61385 bytes_read=76592 bytes_retransmit=0 bytes_invalid=0 send_seq=2719 receive_seq=2719 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001764 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1798 bytes_read=7443 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999961 adj=49999716  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.3 chamber: temp=19.7 sysload=0.65 cputime=29.218 memavail=695564 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.318
Stats 571.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=61559 bytes_read=77086 bytes_retransmit=0 bytes_invalid=0 send_seq=2732 receive_seq=2732 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001769 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1804 bytes_read=7472 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999962 adj=49999781  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.5 chamber: temp=19.8 sysload=0.60 cputime=29.316 memavail=696068 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.318
Stats 572.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=61733 bytes_read=77560 bytes_retransmit=0 bytes_invalid=0 send_seq=2745 receive_seq=2745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001770 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1810 bytes_read=7488 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999967 adj=49999707  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.5 chamber: temp=19.6 sysload=0.60 cputime=29.425 memavail=696068 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.318
Stats 573.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=61923 bytes_read=78046 bytes_retransmit=0 bytes_invalid=0 send_seq=2759 receive_seq=2759 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001770 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1816 bytes_read=7504 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999972 adj=49999716  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.5 chamber: temp=19.7 sysload=0.60 cputime=29.530 memavail=696068 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.375
Stats 574.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=62097 bytes_read=78556 bytes_retransmit=0 bytes_invalid=0 send_seq=2772 receive_seq=2772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001768 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1822 bytes_read=7520 bytes_retransmit=0 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999976 adj=49999733  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.60 cputime=29.631 memavail=695804 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.375
Stats 575.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=62314 bytes_read=79046 bytes_retransmit=0 bytes_invalid=0 send_seq=2787 receive_seq=2787 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001763 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=1828 bytes_read=7536 bytes_retransmit=0 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999980 adj=49999738  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.5 chamber: temp=19.6 sysload=0.60 cputime=29.730 memavail=695828 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.332
Stats 576.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=62488 bytes_read=79512 bytes_retransmit=0 bytes_invalid=0 send_seq=2800 receive_seq=2800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001762 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1834 bytes_read=7565 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999984 adj=49999763  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.6 chamber: temp=19.7 sysload=0.55 cputime=29.832 memavail=695828 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.332
Stats 577.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=62662 bytes_read=80022 bytes_retransmit=0 bytes_invalid=0 send_seq=2813 receive_seq=2813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001759 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1840 bytes_read=7581 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999988 adj=49999753  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.55 cputime=29.929 memavail=695432 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.332
Stats 578.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=62847 bytes_read=80517 bytes_retransmit=0 bytes_invalid=0 send_seq=2826 receive_seq=2826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001757 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1846 bytes_read=7597 bytes_retransmit=0 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999991 adj=49999772  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.5 chamber: temp=19.7 sysload=0.55 cputime=30.027 memavail=695576 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 579.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=63021 bytes_read=80983 bytes_retransmit=0 bytes_invalid=0 send_seq=2839 receive_seq=2839 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001756 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1852 bytes_read=7613 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999994 adj=49999747  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.7 chamber: temp=19.7 sysload=0.55 cputime=30.129 memavail=695576 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 580.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=63201 bytes_read=81493 bytes_retransmit=0 bytes_invalid=0 send_seq=2853 receive_seq=2852 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1858 bytes_read=7629 bytes_retransmit=0 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999996 adj=49999741  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.4 chamber: temp=19.7 sysload=0.55 cputime=30.236 memavail=695472 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 581.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=63527 bytes_read=82250 bytes_retransmit=0 bytes_invalid=0 send_seq=2884 receive_seq=2884 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001754 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1864 bytes_read=7658 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999999 adj=49999694  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.8 chamber: temp=19.7 sysload=0.50 cputime=30.377 memavail=695336 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.331
Stats 582.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=63917 bytes_read=83121 bytes_retransmit=0 bytes_invalid=0 send_seq=2923 receive_seq=2923 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001747 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1870 bytes_read=7674 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000003 adj=49999725  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.5 chamber: temp=19.6 sysload=0.50 cputime=30.526 memavail=695336 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.381
Stats 583.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=64254 bytes_read=83977 bytes_retransmit=0 bytes_invalid=0 send_seq=2956 receive_seq=2956 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001744 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1876 bytes_read=7690 bytes_retransmit=0 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000004 adj=49999757  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.8 chamber: temp=19.8 sysload=0.50 cputime=30.667 memavail=695320 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.381
Stats 584.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=64692 bytes_read=84980 bytes_retransmit=0 bytes_invalid=0 send_seq=3002 receive_seq=3001 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001741 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1882 bytes_read=7706 bytes_retransmit=0 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000010 adj=49999729  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.8 chamber: temp=19.6 sysload=0.50 cputime=30.841 memavail=695588 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.381
Stats 585.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=65074 bytes_read=85862 bytes_retransmit=0 bytes_invalid=0 send_seq=3041 receive_seq=3040 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001742 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1888 bytes_read=7722 bytes_retransmit=0 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000012 adj=49999773  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.6 chamber: temp=19.7 sysload=0.50 cputime=31.000 memavail=695588 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.381
Stats 586.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=65499 bytes_read=86857 bytes_retransmit=0 bytes_invalid=0 send_seq=3084 receive_seq=3084 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001740 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1894 bytes_read=7751 bytes_retransmit=0 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999753  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.7 chamber: temp=19.6 sysload=0.46 cputime=31.157 memavail=695168 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.270
Stats 587.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=66012 bytes_read=87976 bytes_retransmit=0 bytes_invalid=0 send_seq=3138 receive_seq=3138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001734 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1900 bytes_read=7767 bytes_retransmit=0 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000017 adj=49999761  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.8 chamber: temp=19.7 sysload=0.46 cputime=31.336 memavail=695348 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.270
Stats 588.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=66386 bytes_read=88875 bytes_retransmit=0 bytes_invalid=0 send_seq=3176 receive_seq=3176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1906 bytes_read=7783 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000020 adj=49999742  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.8 chamber: temp=19.6 sysload=0.46 cputime=31.547 memavail=695348 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.270
Stats 589.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=66832 bytes_read=89894 bytes_retransmit=0 bytes_invalid=0 send_seq=3223 receive_seq=3223 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001727 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1912 bytes_read=7799 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000024 adj=49999743  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.8 chamber: temp=19.7 sysload=0.46 cputime=31.687 memavail=695564 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.270
Stats 590.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=67278 bytes_read=90884 bytes_retransmit=0 bytes_invalid=0 send_seq=3270 receive_seq=3270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1918 bytes_read=7815 bytes_retransmit=0 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000025 adj=49999772  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.8 chamber: temp=19.8 sysload=0.46 cputime=31.859 memavail=695612 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.270
Stats 591.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=67540 bytes_read=91514 bytes_retransmit=0 bytes_invalid=0 send_seq=3293 receive_seq=3293 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001727 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1924 bytes_read=7844 bytes_retransmit=0 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000026 adj=49999741  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=29.9 chamber: temp=19.6 sysload=0.43 cputime=31.985 memavail=695360 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.339
Stats 592.9: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=67714 bytes_read=92023 bytes_retransmit=0 bytes_invalid=0 send_seq=3306 receive_seq=3306 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001726 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1930 bytes_read=7860 bytes_retransmit=0 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000027 adj=49999700  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=29.8 chamber: temp=19.8 sysload=0.43 cputime=32.084 memavail=694972 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.339
Stats 593.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=67904 bytes_read=92509 bytes_retransmit=0 bytes_invalid=0 send_seq=3320 receive_seq=3320 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1936 bytes_read=7876 bytes_retransmit=0 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000027 adj=49999680  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.0 chamber: temp=19.7 sysload=0.43 cputime=32.184 memavail=695108 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.405
Stats 594.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=68078 bytes_read=92989 bytes_retransmit=0 bytes_invalid=0 send_seq=3333 receive_seq=3333 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1942 bytes_read=7892 bytes_retransmit=0 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000042 adj=49999650  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.0 chamber: temp=19.7 sysload=0.43 cputime=32.285 memavail=695108 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.405
Stats 595.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=68268 bytes_read=93487 bytes_retransmit=0 bytes_invalid=0 send_seq=3347 receive_seq=3347 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1948 bytes_read=7908 bytes_retransmit=0 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000046 adj=49999817  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.0 chamber: temp=19.7 sysload=0.43 cputime=32.386 memavail=695108 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.354
Stats 596.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=68458 bytes_read=93954 bytes_retransmit=0 bytes_invalid=0 send_seq=3361 receive_seq=3361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001733 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1954 bytes_read=7924 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000047 adj=49999837  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.0 chamber: temp=19.8 sysload=0.39 cputime=32.485 memavail=695120 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.297
Stats 597.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=68632 bytes_read=94449 bytes_retransmit=0 bytes_invalid=0 send_seq=3374 receive_seq=3374 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1960 bytes_read=7953 bytes_retransmit=0 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000048 adj=49999770  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.0 chamber: temp=19.8 sysload=0.39 cputime=32.588 memavail=695120 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.297
Stats 598.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=68806 bytes_read=94959 bytes_retransmit=0 bytes_invalid=0 send_seq=3387 receive_seq=3387 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1966 bytes_read=7969 bytes_retransmit=0 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000050 adj=49999752  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.2 chamber: temp=19.7 sysload=0.39 cputime=32.691 memavail=695016 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.241
Stats 599.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=68991 bytes_read=95425 bytes_retransmit=0 bytes_invalid=0 send_seq=3400 receive_seq=3400 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001739 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1972 bytes_read=7985 bytes_retransmit=0 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000050 adj=49999707  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.1 chamber: temp=19.7 sysload=0.39 cputime=32.793 memavail=695120 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.241
Stats 600.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=69181 bytes_read=95940 bytes_retransmit=0 bytes_invalid=0 send_seq=3414 receive_seq=3414 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001736 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1978 bytes_read=8001 bytes_retransmit=0 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000051 adj=49999661  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.0 chamber: temp=19.7 sysload=0.39 cputime=32.894 memavail=695120 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.301
Stats 601.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=69355 bytes_read=96420 bytes_retransmit=0 bytes_invalid=0 send_seq=3427 receive_seq=3427 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001765 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1984 bytes_read=8017 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999672  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.0 chamber: temp=19.8 sysload=0.44 cputime=33.001 memavail=694808 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.301
Stats 602.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=69540 bytes_read=96886 bytes_retransmit=0 bytes_invalid=0 send_seq=3440 receive_seq=3440 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1990 bytes_read=8046 bytes_retransmit=0 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999529  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.0 chamber: temp=19.7 sysload=0.44 cputime=33.103 memavail=694880 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.384
Stats 603.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=69714 bytes_read=97411 bytes_retransmit=0 bytes_invalid=0 send_seq=3453 receive_seq=3453 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001758 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1996 bytes_read=8062 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999558  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.1 chamber: temp=19.7 sysload=0.44 cputime=33.209 memavail=694880 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.384
Stats 604.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=69888 bytes_read=97891 bytes_retransmit=0 bytes_invalid=0 send_seq=3466 receive_seq=3466 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2002 bytes_read=8078 bytes_retransmit=0 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000053 adj=49999581  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=30.3 chamber: temp=19.8 sysload=0.44 cputime=33.312 memavail=694828 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.384
Stats 605.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=70078 bytes_read=98362 bytes_retransmit=0 bytes_invalid=0 send_seq=3480 receive_seq=3480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001748 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2008 bytes_read=8094 bytes_retransmit=0 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999601  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.2 chamber: temp=19.6 sysload=0.44 cputime=33.415 memavail=694892 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.332
Stats 606.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=70252 bytes_read=98872 bytes_retransmit=0 bytes_invalid=0 send_seq=3493 receive_seq=3493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001748 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2014 bytes_read=8110 bytes_retransmit=0 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000051 adj=49999600  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.3 chamber: temp=19.7 sysload=0.49 cputime=33.521 memavail=694892 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.332
Stats 607.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=70442 bytes_read=99357 bytes_retransmit=0 bytes_invalid=0 send_seq=3507 receive_seq=3507 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001748 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=2020 bytes_read=8139 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000057 adj=49999580  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.2 chamber: temp=19.8 sysload=0.49 cputime=33.628 memavail=694684 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.276
Stats 608.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=70616 bytes_read=99838 bytes_retransmit=0 bytes_invalid=0 send_seq=3520 receive_seq=3520 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001751 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=2026 bytes_read=8155 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000058 adj=49999670  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.2 chamber: temp=19.7 sysload=0.49 cputime=33.727 memavail=694892 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.276
Stats 609.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=70790 bytes_read=100348 bytes_retransmit=0 bytes_invalid=0 send_seq=3533 receive_seq=3533 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=2032 bytes_read=8171 bytes_retransmit=0 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000058 adj=49999645  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.2 chamber: temp=19.7 sysload=0.49 cputime=33.829 memavail=694892 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.276
Stats 610.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=70964 bytes_read=100828 bytes_retransmit=0 bytes_invalid=0 send_seq=3546 receive_seq=3546 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001755 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=2038 bytes_read=8187 bytes_retransmit=0 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000059 adj=49999589  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.2 chamber: temp=19.7 sysload=0.49 cputime=33.927 memavail=694988 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.276
Stats 611.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=71138 bytes_read=101294 bytes_retransmit=0 bytes_invalid=0 send_seq=3559 receive_seq=3559 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001754 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=2050 bytes_read=8219 bytes_retransmit=0 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000065 adj=49999619  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.3 chamber: temp=19.6 sysload=0.53 cputime=34.042 memavail=695156 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.276
Stats 612.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=71328 bytes_read=101809 bytes_retransmit=0 bytes_invalid=0 send_seq=3573 receive_seq=3573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001749 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2056 bytes_read=8248 bytes_retransmit=0 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000065 adj=49999717  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.2 chamber: temp=19.6 sysload=0.53 cputime=34.144 memavail=695156 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.313
Stats 613.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=71518 bytes_read=102309 bytes_retransmit=0 bytes_invalid=0 send_seq=3587 receive_seq=3587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001745 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2062 bytes_read=8264 bytes_retransmit=0 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000065 adj=49999703  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.4 chamber: temp=19.7 sysload=0.53 cputime=34.249 memavail=694784 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.372
Stats 614.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=73361 bytes_read=102915 bytes_retransmit=0 bytes_invalid=0 send_seq=3628 receive_seq=3628 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2068 bytes_read=8280 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999688  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.5 chamber: temp=19.7 sysload=0.53 cputime=34.378 memavail=694904 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.372
Stats 615.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=73535 bytes_read=103425 bytes_retransmit=0 bytes_invalid=0 send_seq=3641 receive_seq=3641 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001731 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2074 bytes_read=8296 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000063 adj=49999643  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.4 chamber: temp=19.8 sysload=0.53 cputime=34.488 memavail=694904 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.372
Stats 617.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=73709 bytes_read=103905 bytes_retransmit=0 bytes_invalid=0 send_seq=3654 receive_seq=3654 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001727 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2080 bytes_read=8312 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000064 adj=49999666  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.4 chamber: temp=19.7 sysload=0.65 cputime=34.599 memavail=695100 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.372
Stats 618.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000004 bytes_write=73899 bytes_read=104376 bytes_retransmit=0 bytes_invalid=0 send_seq=3668 receive_seq=3668 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001722 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2086 bytes_read=8341 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000064 adj=49999688  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.4 chamber: temp=19.7 sysload=0.65 cputime=34.712 memavail=695176 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.330
Stats 619.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=74084 bytes_read=104894 bytes_retransmit=0 bytes_invalid=0 send_seq=3681 receive_seq=3681 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001716 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2092 bytes_read=8357 bytes_retransmit=0 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999682  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.6 chamber: temp=19.8 sysload=0.65 cputime=34.823 memavail=695176 print_time=561.990 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.273
Stats 620.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=74765 bytes_read=105410 bytes_retransmit=0 bytes_invalid=0 send_seq=3704 receive_seq=3704 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001709 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2098 bytes_read=8373 bytes_retransmit=0 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999653  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.7 chamber: temp=19.7 sysload=0.65 cputime=34.958 memavail=695132 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.3 pwm=0.000
Stats 621.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=75433 bytes_read=105920 bytes_retransmit=0 bytes_invalid=0 send_seq=3726 receive_seq=3726 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001701 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2104 bytes_read=8389 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000061 adj=49999659  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.6 chamber: temp=19.7 sysload=0.65 cputime=35.083 memavail=695180 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.2 pwm=0.000
Stats 622.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=75607 bytes_read=106444 bytes_retransmit=0 bytes_invalid=0 send_seq=3739 receive_seq=3739 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001701 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2110 bytes_read=8405 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999668  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=30.6 chamber: temp=19.8 sysload=0.67 cputime=35.203 memavail=695668 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.8 pwm=0.000
Stats 623.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000034 bytes_write=75781 bytes_read=106910 bytes_retransmit=0 bytes_invalid=0 send_seq=3752 receive_seq=3752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001703 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2116 bytes_read=8434 bytes_retransmit=0 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000061 adj=49999656  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.6 chamber: temp=19.6 sysload=0.67 cputime=35.315 memavail=695580 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.0 pwm=0.000
Stats 624.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000027 bytes_write=76023 bytes_read=107416 bytes_retransmit=0 bytes_invalid=0 send_seq=3767 receive_seq=3767 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001700 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2122 bytes_read=8450 bytes_retransmit=0 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999615  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.7 chamber: temp=19.8 sysload=0.67 cputime=35.431 memavail=695700 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.0 pwm=0.000
Stats 625.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000027 bytes_write=76245 bytes_read=107935 bytes_retransmit=0 bytes_invalid=0 send_seq=3782 receive_seq=3782 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001697 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2128 bytes_read=8466 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999647  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.9 chamber: temp=19.8 sysload=0.67 cputime=35.547 memavail=695700 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=216.3 pwm=0.000
Stats 626.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000027 bytes_write=76527 bytes_read=108421 bytes_retransmit=0 bytes_invalid=0 send_seq=3799 receive_seq=3799 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001693 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2134 bytes_read=8482 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000063 adj=49999647  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.8 chamber: temp=19.6 sysload=0.67 cputime=35.669 memavail=695648 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=215.0 pwm=0.000
Stats 627.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000027 bytes_write=76750 bytes_read=108912 bytes_retransmit=0 bytes_invalid=0 send_seq=3814 receive_seq=3814 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001689 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2140 bytes_read=8498 bytes_retransmit=0 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000062 adj=49999661  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=30.7 chamber: temp=19.7 sysload=0.70 cputime=35.780 memavail=695696 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.7 pwm=0.000
Stats 628.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000011 mcu_task_stddev=0.000027 bytes_write=77032 bytes_read=109441 bytes_retransmit=0 bytes_invalid=0 send_seq=3831 receive_seq=3831 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001686 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2146 bytes_read=8527 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000063 adj=49999648  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.8 chamber: temp=19.8 sysload=0.70 cputime=35.895 memavail=695696 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.9 pwm=0.000
Stats 629.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=77258 bytes_read=109932 bytes_retransmit=0 bytes_invalid=0 send_seq=3846 receive_seq=3846 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001683 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2152 bytes_read=8543 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000064 adj=49999653  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=30.8 chamber: temp=19.7 sysload=0.70 cputime=36.010 memavail=695592 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.6 pwm=0.000
Stats 630.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=77481 bytes_read=110418 bytes_retransmit=0 bytes_invalid=0 send_seq=3860 receive_seq=3860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001678 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2158 bytes_read=8559 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000065 adj=49999674  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=30.7 chamber: temp=19.7 sysload=0.70 cputime=36.125 memavail=695592 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.2 pwm=0.000
Stats 631.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=77772 bytes_read=110942 bytes_retransmit=0 bytes_invalid=0 send_seq=3876 receive_seq=3876 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001671 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2164 bytes_read=8575 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000064 adj=49999686  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.8 chamber: temp=19.6 sysload=0.70 cputime=36.237 memavail=695704 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.6 pwm=0.000
Stats 632.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=77994 bytes_read=111418 bytes_retransmit=0 bytes_invalid=0 send_seq=3891 receive_seq=3891 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001664 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2170 bytes_read=8591 bytes_retransmit=0 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000059 adj=49999684  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.7 chamber: temp=19.7 sysload=0.73 cputime=36.329 memavail=695456 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.4 pwm=0.000
Stats 633.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=78271 bytes_read=111928 bytes_retransmit=0 bytes_invalid=0 send_seq=3907 receive_seq=3907 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001657 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2176 bytes_read=8620 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000056 adj=49999616  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.9 chamber: temp=19.8 sysload=0.73 cputime=36.447 memavail=695456 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.1 pwm=0.000
Stats 634.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=78494 bytes_read=112448 bytes_retransmit=0 bytes_invalid=0 send_seq=3922 receive_seq=3922 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001660 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2182 bytes_read=8636 bytes_retransmit=0 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000053 adj=49999595  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.9 chamber: temp=19.7 sysload=0.73 cputime=36.561 memavail=695456 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.6 pwm=0.000
Stats 635.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=78717 bytes_read=112919 bytes_retransmit=0 bytes_invalid=0 send_seq=3936 receive_seq=3936 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001665 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2188 bytes_read=8652 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999530  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.9 chamber: temp=19.6 sysload=0.73 cputime=36.682 memavail=695076 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.4 pwm=0.000
Stats 636.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=78946 bytes_read=113434 bytes_retransmit=0 bytes_invalid=0 send_seq=3951 receive_seq=3950 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001661 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2194 bytes_read=8668 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000054 adj=49999511  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.9 chamber: temp=19.6 sysload=0.73 cputime=36.802 memavail=695220 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.3 pwm=0.000
Stats 637.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=79221 bytes_read=113945 bytes_retransmit=0 bytes_invalid=0 send_seq=3967 receive_seq=3967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001665 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2200 bytes_read=8684 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000053 adj=49999573  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.0 chamber: temp=19.7 sysload=0.91 cputime=36.918 memavail=695220 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.7 pwm=0.000
Stats 638.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=79449 bytes_read=114421 bytes_retransmit=0 bytes_invalid=0 send_seq=3982 receive_seq=3982 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001665 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2206 bytes_read=8713 bytes_retransmit=0 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999557  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=30.9 chamber: temp=19.6 sysload=0.91 cputime=37.031 memavail=695116 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.6 pwm=0.000
Stats 639.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=79785 bytes_read=114966 bytes_retransmit=0 bytes_invalid=0 send_seq=3999 receive_seq=3999 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001663 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2212 bytes_read=8729 bytes_retransmit=0 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999551  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.1 chamber: temp=19.7 sysload=0.91 cputime=37.147 memavail=695232 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.5 pwm=0.000
Stats 640.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=80013 bytes_read=115456 bytes_retransmit=0 bytes_invalid=0 send_seq=4014 receive_seq=4014 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001662 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2218 bytes_read=8745 bytes_retransmit=0 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000052 adj=49999568  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=30.9 chamber: temp=19.7 sysload=0.91 cputime=37.268 memavail=695232 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.1 pwm=0.000
Stats 641.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=80241 bytes_read=115932 bytes_retransmit=0 bytes_invalid=0 send_seq=4029 receive_seq=4029 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001661 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2224 bytes_read=8761 bytes_retransmit=0 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000049 adj=49999573  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=30.8 chamber: temp=19.7 sysload=0.91 cputime=37.392 memavail=695364 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.0 pwm=0.000
Stats 642.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=80464 bytes_read=116452 bytes_retransmit=0 bytes_invalid=0 send_seq=4044 receive_seq=4044 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001662 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=2230 bytes_read=8777 bytes_retransmit=0 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000048 adj=49999531  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.0 chamber: temp=19.7 sysload=1.00 cputime=37.517 memavail=695496 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.9 pwm=0.000
Stats 643.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=80687 bytes_read=116928 bytes_retransmit=0 bytes_invalid=0 send_seq=4058 receive_seq=4058 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001663 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2236 bytes_read=8806 bytes_retransmit=0 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000048 adj=49999538  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=31.1 chamber: temp=19.8 sysload=1.00 cputime=37.628 memavail=694276 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.6 pwm=0.000
Stats 644.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=80910 bytes_read=117401 bytes_retransmit=0 bytes_invalid=0 send_seq=4072 receive_seq=4072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001660 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2242 bytes_read=8822 bytes_retransmit=0 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000044 adj=49999544  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.1 chamber: temp=19.7 sysload=1.00 cputime=37.721 memavail=696008 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.5 pwm=0.000
Stats 645.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=81185 bytes_read=117926 bytes_retransmit=0 bytes_invalid=0 send_seq=4088 receive_seq=4088 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001658 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2248 bytes_read=8838 bytes_retransmit=0 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000051 adj=49999501  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=31.0 chamber: temp=19.7 sysload=1.00 cputime=37.844 memavail=696008 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.4 pwm=0.000
Stats 646.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=81413 bytes_read=118416 bytes_retransmit=0 bytes_invalid=0 send_seq=4103 receive_seq=4103 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001658 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2254 bytes_read=8854 bytes_retransmit=0 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000048 adj=49999636  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.2 chamber: temp=19.8 sysload=1.00 cputime=37.964 memavail=696008 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.1 pwm=0.000
Stats 647.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=81649 bytes_read=118892 bytes_retransmit=0 bytes_invalid=0 send_seq=4118 receive_seq=4118 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001654 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2260 bytes_read=8870 bytes_retransmit=0 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000043 adj=49999574  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.1 chamber: temp=19.7 sysload=1.08 cputime=38.086 memavail=696020 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.1 pwm=0.000
Stats 648.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=81871 bytes_read=119427 bytes_retransmit=0 bytes_invalid=0 send_seq=4133 receive_seq=4133 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001645 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2266 bytes_read=8899 bytes_retransmit=0 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000041 adj=49999526  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.1 chamber: temp=19.8 sysload=1.08 cputime=38.207 memavail=696020 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.1 pwm=0.000
Stats 649.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=82094 bytes_read=119912 bytes_retransmit=0 bytes_invalid=0 send_seq=4147 receive_seq=4147 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001650 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2272 bytes_read=8915 bytes_retransmit=0 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000039 adj=49999539  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.2 chamber: temp=19.8 sysload=1.08 cputime=38.323 memavail=696020 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.7 pwm=0.000
Stats 650.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=82317 bytes_read=120383 bytes_retransmit=0 bytes_invalid=0 send_seq=4161 receive_seq=4161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001648 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2278 bytes_read=8931 bytes_retransmit=0 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000036 adj=49999502  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.2 chamber: temp=19.8 sysload=1.08 cputime=38.422 memavail=695656 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.8 pwm=0.000
Stats 651.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=82535 bytes_read=120898 bytes_retransmit=0 bytes_invalid=0 send_seq=4175 receive_seq=4175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001648 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2284 bytes_read=8947 bytes_retransmit=0 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000036 adj=49999480  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.2 chamber: temp=19.7 sysload=1.08 cputime=38.537 memavail=695768 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.7 pwm=0.000
Stats 652.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=82758 bytes_read=121383 bytes_retransmit=0 bytes_invalid=0 send_seq=4189 receive_seq=4189 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001646 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2290 bytes_read=8963 bytes_retransmit=0 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000033 adj=49999514  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.3 chamber: temp=19.7 sysload=1.15 cputime=38.667 memavail=695268 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.5 pwm=0.000
Stats 653.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=82981 bytes_read=121869 bytes_retransmit=0 bytes_invalid=0 send_seq=4203 receive_seq=4203 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001647 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2296 bytes_read=8991 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000029 adj=49999490  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.3 chamber: temp=19.7 sysload=1.15 cputime=38.789 memavail=695204 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.5 pwm=0.000
Stats 654.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=83256 bytes_read=122408 bytes_retransmit=0 bytes_invalid=0 send_seq=4219 receive_seq=4219 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001645 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2302 bytes_read=9006 bytes_retransmit=0 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000031 adj=49999438  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.4 chamber: temp=19.7 sysload=1.15 cputime=38.919 memavail=695204 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.2 pwm=0.000
Stats 655.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=83484 bytes_read=122884 bytes_retransmit=0 bytes_invalid=0 send_seq=4234 receive_seq=4234 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001645 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2308 bytes_read=9021 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000029 adj=49999512  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.4 chamber: temp=19.7 sysload=1.15 cputime=39.034 memavail=695276 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.2 pwm=0.000
Stats 656.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=83726 bytes_read=123375 bytes_retransmit=0 bytes_invalid=0 send_seq=4249 receive_seq=4249 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001643 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2314 bytes_read=9036 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000027 adj=49999495  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.5 chamber: temp=19.8 sysload=1.15 cputime=39.156 memavail=695248 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.2 pwm=0.000
Stats 657.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=83948 bytes_read=123894 bytes_retransmit=0 bytes_invalid=0 send_seq=4264 receive_seq=4264 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001640 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2320 bytes_read=9051 bytes_retransmit=0 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000026 adj=49999487  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.4 chamber: temp=19.7 sysload=1.14 cputime=39.278 memavail=695280 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.0 pwm=0.000
Stats 658.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=84176 bytes_read=124370 bytes_retransmit=0 bytes_invalid=0 send_seq=4279 receive_seq=4279 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001638 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2326 bytes_read=9080 bytes_retransmit=0 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000022 adj=49999510  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.3 chamber: temp=19.8 sysload=1.14 cputime=39.397 memavail=695280 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.0 pwm=0.000
Stats 659.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84399 bytes_read=124871 bytes_retransmit=0 bytes_invalid=0 send_seq=4293 receive_seq=4293 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001635 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2332 bytes_read=9096 bytes_retransmit=0 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000018 adj=49999469  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.5 chamber: temp=19.7 sysload=1.14 cputime=39.516 memavail=695280 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.1 pwm=0.000
Stats 660.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84622 bytes_read=125390 bytes_retransmit=0 bytes_invalid=0 send_seq=4308 receive_seq=4308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001633 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2338 bytes_read=9112 bytes_retransmit=0 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999454  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.6 chamber: temp=19.8 sysload=1.14 cputime=39.633 memavail=695280 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.9 pwm=0.000
Stats 661.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=84850 bytes_read=125866 bytes_retransmit=0 bytes_invalid=0 send_seq=4323 receive_seq=4323 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001631 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2344 bytes_read=9128 bytes_retransmit=0 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000014 adj=49999460  heater_bed: target=0 temp=19.7 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.7 chamber: temp=19.8 sysload=1.14 cputime=39.748 memavail=695280 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.9 pwm=0.000
Stats 662.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=85073 bytes_read=126352 bytes_retransmit=0 bytes_invalid=0 send_seq=4337 receive_seq=4337 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001625 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2350 bytes_read=9144 bytes_retransmit=0 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000010 adj=49999464  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.5 chamber: temp=19.8 sysload=1.13 cputime=39.847 memavail=695284 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.0 pwm=0.000
Stats 663.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=85294 bytes_read=126866 bytes_retransmit=0 bytes_invalid=0 send_seq=4351 receive_seq=4351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001619 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2356 bytes_read=9173 bytes_retransmit=0 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000010 adj=49999449  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.5 chamber: temp=19.8 sysload=1.13 cputime=39.940 memavail=695284 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.8 pwm=0.000
Stats 664.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85522 bytes_read=127357 bytes_retransmit=0 bytes_invalid=0 send_seq=4366 receive_seq=4366 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001622 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2362 bytes_read=9189 bytes_retransmit=0 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000007 adj=49999504  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.5 chamber: temp=19.7 sysload=1.13 cputime=40.065 memavail=695284 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.9 pwm=0.000
Stats 665.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85745 bytes_read=127857 bytes_retransmit=0 bytes_invalid=0 send_seq=4380 receive_seq=4380 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001621 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2368 bytes_read=9205 bytes_retransmit=0 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000004 adj=49999457  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.7 chamber: temp=19.7 sysload=1.13 cputime=40.186 memavail=695292 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.0 pwm=0.000
Stats 666.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=85987 bytes_read=128362 bytes_retransmit=0 bytes_invalid=0 send_seq=4395 receive_seq=4395 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001620 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2374 bytes_read=9221 bytes_retransmit=0 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000006 adj=49999444  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=31.6 chamber: temp=19.8 sysload=1.13 cputime=40.304 memavail=695292 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.8 pwm=0.000
Stats 667.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=86209 bytes_read=128827 bytes_retransmit=0 bytes_invalid=0 send_seq=4410 receive_seq=4410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001621 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=2386 bytes_read=9253 bytes_retransmit=0 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000008 adj=49999497  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.6 chamber: temp=19.7 sysload=1.12 cputime=40.426 memavail=695292 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.9 pwm=0.000
Stats 668.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=86432 bytes_read=129347 bytes_retransmit=0 bytes_invalid=0 send_seq=4424 receive_seq=4424 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001619 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2392 bytes_read=9282 bytes_retransmit=0 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000021 adj=49999549  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.5 chamber: temp=19.7 sysload=1.12 cputime=40.551 memavail=695040 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.1 pwm=0.000
Stats 669.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=86650 bytes_read=129827 bytes_retransmit=0 bytes_invalid=0 send_seq=4437 receive_seq=4437 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001618 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2398 bytes_read=9298 bytes_retransmit=0 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000018 adj=49999747  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.7 chamber: temp=19.8 sysload=1.12 cputime=40.665 memavail=695044 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.9 pwm=0.000
Stats 670.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=86868 bytes_read=130298 bytes_retransmit=0 bytes_invalid=0 send_seq=4451 receive_seq=4451 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001617 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2404 bytes_read=9314 bytes_retransmit=0 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000016 adj=49999675  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.7 chamber: temp=19.7 sysload=1.12 cputime=40.780 memavail=695044 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.0 pwm=0.000
Stats 671.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87091 bytes_read=130813 bytes_retransmit=0 bytes_invalid=0 send_seq=4465 receive_seq=4465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001616 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2410 bytes_read=9330 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000014 adj=49999620  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.5 chamber: temp=19.8 sysload=1.12 cputime=40.899 memavail=695208 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.2 pwm=0.000
Stats 672.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87319 bytes_read=131303 bytes_retransmit=0 bytes_invalid=0 send_seq=4480 receive_seq=4480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001611 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2416 bytes_read=9346 bytes_retransmit=0 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000011 adj=49999573  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.7 chamber: temp=19.7 sysload=1.03 cputime=41.018 memavail=695560 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.0 pwm=0.000
Stats 673.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87540 bytes_read=131774 bytes_retransmit=0 bytes_invalid=0 send_seq=4494 receive_seq=4494 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001610 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2422 bytes_read=9375 bytes_retransmit=0 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000008 adj=49999550  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.6 chamber: temp=19.7 sysload=1.03 cputime=41.132 memavail=695560 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.2 pwm=0.000
Stats 674.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87768 bytes_read=132309 bytes_retransmit=0 bytes_invalid=0 send_seq=4509 receive_seq=4509 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001609 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2428 bytes_read=9391 bytes_retransmit=0 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000005 adj=49999506  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.7 chamber: temp=19.8 sysload=1.03 cputime=41.251 memavail=695560 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.3 pwm=0.000
Stats 675.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=87996 bytes_read=132799 bytes_retransmit=0 bytes_invalid=0 send_seq=4524 receive_seq=4524 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001604 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2434 bytes_read=9407 bytes_retransmit=0 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000002 adj=49999476  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.7 chamber: temp=19.8 sysload=1.03 cputime=41.365 memavail=695560 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.2 pwm=0.000
Stats 676.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=88252 bytes_read=133280 bytes_retransmit=0 bytes_invalid=0 send_seq=4540 receive_seq=4540 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001601 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2440 bytes_read=9423 bytes_retransmit=0 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=50000002 adj=49999481  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.7 chamber: temp=19.8 sysload=1.03 cputime=41.479 memavail=695560 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.4 pwm=0.000
Stats 677.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=88474 bytes_read=133800 bytes_retransmit=0 bytes_invalid=0 send_seq=4555 receive_seq=4555 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001597 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2446 bytes_read=9439 bytes_retransmit=0 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999998 adj=49999505  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.6 chamber: temp=19.8 sysload=1.02 cputime=41.598 memavail=695572 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.5 pwm=0.000
Stats 678.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=88702 bytes_read=134305 bytes_retransmit=0 bytes_invalid=0 send_seq=4570 receive_seq=4570 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001601 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2452 bytes_read=9468 bytes_retransmit=0 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999994 adj=49999478  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.9 chamber: temp=19.8 sysload=1.02 cputime=41.719 memavail=695572 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.4 pwm=0.000
Stats 679.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=88876 bytes_read=134771 bytes_retransmit=0 bytes_invalid=0 send_seq=4583 receive_seq=4583 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001600 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2458 bytes_read=9484 bytes_retransmit=0 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999992 adj=49999415  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.7 chamber: temp=19.7 sysload=1.02 cputime=41.829 memavail=695572 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.6 pwm=0.000
Stats 680.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=89148 bytes_read=135296 bytes_retransmit=0 bytes_invalid=0 send_seq=4599 receive_seq=4599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001597 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2464 bytes_read=9500 bytes_retransmit=0 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999992 adj=49999427  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.9 chamber: temp=19.7 sysload=1.02 cputime=41.942 memavail=695580 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.8 pwm=0.000
Stats 681.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=89322 bytes_read=135776 bytes_retransmit=0 bytes_invalid=0 send_seq=4612 receive_seq=4612 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001597 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2470 bytes_read=9516 bytes_retransmit=0 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999994 adj=49999472  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.9 chamber: temp=19.7 sysload=1.02 cputime=42.059 memavail=695540 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.8 pwm=0.000
Stats 682.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=89545 bytes_read=136247 bytes_retransmit=0 bytes_invalid=0 send_seq=4626 receive_seq=4626 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001593 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2476 bytes_read=9532 bytes_retransmit=0 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999993 adj=49999524  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.8 chamber: temp=19.8 sysload=0.94 cputime=42.174 memavail=695580 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.0 pwm=0.000
Stats 683.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=89768 bytes_read=136762 bytes_retransmit=0 bytes_invalid=0 send_seq=4640 receive_seq=4640 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001592 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2482 bytes_read=9561 bytes_retransmit=0 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999992 adj=49999536  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.8 chamber: temp=19.7 sysload=0.94 cputime=42.290 memavail=695584 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.9 pwm=0.000
Stats 684.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=89994 bytes_read=137267 bytes_retransmit=0 bytes_invalid=0 send_seq=4655 receive_seq=4655 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001591 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2488 bytes_read=9577 bytes_retransmit=0 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999990 adj=49999525  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.9 chamber: temp=19.8 sysload=0.94 cputime=42.405 memavail=695600 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.1 pwm=0.000
Stats 685.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=90217 bytes_read=137753 bytes_retransmit=0 bytes_invalid=0 send_seq=4669 receive_seq=4669 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001586 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2494 bytes_read=9593 bytes_retransmit=0 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999987 adj=49999503  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.9 chamber: temp=19.8 sysload=0.94 cputime=42.525 memavail=695600 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.3 pwm=0.000
Stats 686.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=90445 bytes_read=138272 bytes_retransmit=0 bytes_invalid=0 send_seq=4684 receive_seq=4684 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001581 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2500 bytes_read=9609 bytes_retransmit=0 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999985 adj=49999494  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.0 chamber: temp=19.7 sysload=0.94 cputime=42.639 memavail=695608 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.3 pwm=0.000
Stats 687.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=90687 bytes_read=138748 bytes_retransmit=0 bytes_invalid=0 send_seq=4699 receive_seq=4699 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001575 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=2506 bytes_read=9625 bytes_retransmit=0 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999983 adj=49999487  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.9 chamber: temp=19.7 sysload=0.87 cputime=42.755 memavail=695608 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.5 pwm=0.000
Stats 688.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=90861 bytes_read=139244 bytes_retransmit=0 bytes_invalid=0 send_seq=4712 receive_seq=4712 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001572 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2512 bytes_read=9654 bytes_retransmit=0 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999980 adj=49999492  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=31.9 chamber: temp=19.7 sysload=0.87 cputime=42.864 memavail=695608 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.7 pwm=0.000
Stats 689.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91078 bytes_read=139758 bytes_retransmit=0 bytes_invalid=0 send_seq=4726 receive_seq=4726 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001570 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2518 bytes_read=9670 bytes_retransmit=0 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999977 adj=49999474  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.1 chamber: temp=19.7 sysload=0.87 cputime=42.978 memavail=695612 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.7 pwm=0.000
Stats 690.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91301 bytes_read=140229 bytes_retransmit=0 bytes_invalid=0 send_seq=4740 receive_seq=4740 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001562 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2524 bytes_read=9686 bytes_retransmit=0 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999977 adj=49999459  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.0 chamber: temp=19.7 sysload=0.87 cputime=43.090 memavail=695612 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.0 pwm=0.000
Stats 691.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91530 bytes_read=140717 bytes_retransmit=0 bytes_invalid=0 send_seq=4755 receive_seq=4755 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001563 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2530 bytes_read=9702 bytes_retransmit=0 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999974 adj=49999514  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.8 chamber: temp=19.7 sysload=0.87 cputime=43.202 memavail=696036 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.2 pwm=0.000
Stats 692.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91753 bytes_read=141229 bytes_retransmit=0 bytes_invalid=0 send_seq=4770 receive_seq=4770 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001563 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2536 bytes_read=9718 bytes_retransmit=0 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999973 adj=49999471  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.0 chamber: temp=19.8 sysload=0.80 cputime=43.314 memavail=696128 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.2 pwm=0.000
Stats 693.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=91981 bytes_read=141705 bytes_retransmit=0 bytes_invalid=0 send_seq=4785 receive_seq=4785 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001564 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2542 bytes_read=9747 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999969 adj=49999466  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.1 chamber: temp=19.7 sysload=0.80 cputime=43.430 memavail=696128 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.5 pwm=0.000
Stats 694.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=92155 bytes_read=142215 bytes_retransmit=0 bytes_invalid=0 send_seq=4798 receive_seq=4798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001567 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2548 bytes_read=9763 bytes_retransmit=0 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999967 adj=49999424  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.9 chamber: temp=19.8 sysload=0.80 cputime=43.542 memavail=696128 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.7 pwm=0.000
Stats 695.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=92378 bytes_read=142715 bytes_retransmit=0 bytes_invalid=0 send_seq=4812 receive_seq=4812 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001565 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2554 bytes_read=9779 bytes_retransmit=0 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999966 adj=49999408  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=31.9 chamber: temp=19.7 sysload=0.80 cputime=43.648 memavail=696128 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.7 pwm=0.000
Stats 696.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=92599 bytes_read=143186 bytes_retransmit=0 bytes_invalid=0 send_seq=4826 receive_seq=4826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001566 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2560 bytes_read=9795 bytes_retransmit=0 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999966 adj=49999431  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.1 chamber: temp=19.9 sysload=0.80 cputime=43.760 memavail=696128 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.0 pwm=0.000
Stats 697.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=92822 bytes_read=143701 bytes_retransmit=0 bytes_invalid=0 send_seq=4840 receive_seq=4840 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001565 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2566 bytes_read=9811 bytes_retransmit=0 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999966 adj=49999456  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.2 chamber: temp=19.8 sysload=0.73 cputime=43.875 memavail=696128 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000
Stats 698.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=93050 bytes_read=144191 bytes_retransmit=0 bytes_invalid=0 send_seq=4855 receive_seq=4855 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001562 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2572 bytes_read=9840 bytes_retransmit=0 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999967 adj=49999480  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.1 chamber: temp=19.8 sysload=0.73 cputime=43.986 memavail=696140 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.3 pwm=0.000
Stats 699.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=93292 bytes_read=144682 bytes_retransmit=0 bytes_invalid=0 send_seq=4870 receive_seq=4870 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001559 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2578 bytes_read=9856 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999966 adj=49999512  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.0 chamber: temp=19.7 sysload=0.73 cputime=44.105 memavail=696140 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.6 pwm=0.000
Stats 700.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=93514 bytes_read=145202 bytes_retransmit=0 bytes_invalid=0 send_seq=4885 receive_seq=4885 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001558 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2584 bytes_read=9872 bytes_retransmit=0 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999965 adj=49999525  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.1 chamber: temp=19.8 sysload=0.73 cputime=44.215 memavail=696140 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.9 pwm=0.000
Stats 701.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=93688 bytes_read=145682 bytes_retransmit=0 bytes_invalid=0 send_seq=4898 receive_seq=4898 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001558 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2590 bytes_read=9888 bytes_retransmit=0 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999964 adj=49999512  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.7 sysload=0.73 cputime=44.327 memavail=695788 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.0 pwm=0.000
Stats 702.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=93911 bytes_read=146153 bytes_retransmit=0 bytes_invalid=0 send_seq=4912 receive_seq=4912 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001555 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2596 bytes_read=9904 bytes_retransmit=0 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999963 adj=49999502  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.1 chamber: temp=19.7 sysload=0.75 cputime=44.441 memavail=695888 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.3 pwm=0.000
Stats 703.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=94139 bytes_read=146673 bytes_retransmit=0 bytes_invalid=0 send_seq=4927 receive_seq=4927 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001551 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2602 bytes_read=9933 bytes_retransmit=0 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999961 adj=49999500  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.8 sysload=0.75 cputime=44.557 memavail=695888 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.6 pwm=0.000
Stats 704.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=94357 bytes_read=147173 bytes_retransmit=0 bytes_invalid=0 send_seq=4941 receive_seq=4941 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001559 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2608 bytes_read=9949 bytes_retransmit=0 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999958 adj=49999499  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.7 sysload=0.75 cputime=44.666 memavail=695900 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.7 pwm=0.000
Stats 705.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=94531 bytes_read=147639 bytes_retransmit=0 bytes_invalid=0 send_seq=4954 receive_seq=4954 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001562 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2614 bytes_read=9965 bytes_retransmit=0 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999957 adj=49999431  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.2 chamber: temp=19.9 sysload=0.75 cputime=44.777 memavail=695900 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.0 pwm=0.000
Stats 706.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=94754 bytes_read=148154 bytes_retransmit=0 bytes_invalid=0 send_seq=4968 receive_seq=4968 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001568 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2620 bytes_read=9981 bytes_retransmit=0 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999955 adj=49999419  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.2 chamber: temp=19.8 sysload=0.75 cputime=44.891 memavail=695900 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.3 pwm=0.000
Stats 707.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=94982 bytes_read=148644 bytes_retransmit=0 bytes_invalid=0 send_seq=4983 receive_seq=4983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001569 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2626 bytes_read=9997 bytes_retransmit=0 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999951 adj=49999395  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.5 chamber: temp=19.8 sysload=0.69 cputime=45.000 memavail=695820 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.4 pwm=0.000
Stats 708.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=95208 bytes_read=149135 bytes_retransmit=0 bytes_invalid=0 send_seq=4998 receive_seq=4998 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001569 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2632 bytes_read=10026 bytes_retransmit=0 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999953 adj=49999353  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.2 chamber: temp=19.8 sysload=0.69 cputime=45.122 memavail=695912 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.7 pwm=0.000
Stats 709.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=95382 bytes_read=149645 bytes_retransmit=0 bytes_invalid=0 send_seq=5011 receive_seq=5011 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001566 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2638 bytes_read=10042 bytes_retransmit=0 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999952 adj=49999422  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.4 chamber: temp=19.8 sysload=0.69 cputime=45.234 memavail=695912 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.1 pwm=0.000
Stats 710.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=95605 bytes_read=150130 bytes_retransmit=0 bytes_invalid=0 send_seq=5025 receive_seq=5025 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001564 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2644 bytes_read=10058 bytes_retransmit=0 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999949 adj=49999439  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.8 sysload=0.69 cputime=45.352 memavail=695912 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.2 pwm=0.000
Stats 711.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=95828 bytes_read=150601 bytes_retransmit=0 bytes_invalid=0 send_seq=5039 receive_seq=5039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001563 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2650 bytes_read=10074 bytes_retransmit=0 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999948 adj=49999435  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.7 sysload=0.69 cputime=45.472 memavail=695344 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.5 pwm=0.000
Stats 712.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=96068 bytes_read=151121 bytes_retransmit=0 bytes_invalid=0 send_seq=5054 receive_seq=5054 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001558 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2656 bytes_read=10090 bytes_retransmit=0 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999942 adj=49999437  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.4 chamber: temp=19.7 sysload=0.64 cputime=45.558 memavail=695368 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.9 pwm=0.000
Stats 713.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=96242 bytes_read=151601 bytes_retransmit=0 bytes_invalid=0 send_seq=5067 receive_seq=5067 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001555 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2662 bytes_read=10119 bytes_retransmit=0 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999942 adj=49999393  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.4 chamber: temp=19.8 sysload=0.64 cputime=45.670 memavail=695380 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.0 pwm=0.000
Stats 714.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96459 bytes_read=152099 bytes_retransmit=0 bytes_invalid=0 send_seq=5081 receive_seq=5081 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001554 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2668 bytes_read=10135 bytes_retransmit=0 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999940 adj=49999422  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.5 chamber: temp=19.8 sysload=0.64 cputime=45.781 memavail=695420 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.4 pwm=0.000
Stats 715.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96687 bytes_read=152602 bytes_retransmit=0 bytes_invalid=0 send_seq=5096 receive_seq=5096 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001555 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2674 bytes_read=10151 bytes_retransmit=0 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999936 adj=49999416  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.2 chamber: temp=19.8 sysload=0.64 cputime=45.895 memavail=695420 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.5 pwm=0.000
Stats 716.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=96861 bytes_read=153067 bytes_retransmit=0 bytes_invalid=0 send_seq=5109 receive_seq=5109 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001552 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2680 bytes_read=10167 bytes_retransmit=0 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999940 adj=49999382  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.4 chamber: temp=19.7 sysload=0.64 cputime=46.003 memavail=695316 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.9 pwm=0.000
Stats 717.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97084 bytes_read=153553 bytes_retransmit=0 bytes_invalid=0 send_seq=5123 receive_seq=5123 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001555 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2686 bytes_read=10183 bytes_retransmit=0 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999940 adj=49999483  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.7 sysload=0.67 cputime=46.120 memavail=695420 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.2 pwm=0.000
Stats 718.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=97307 bytes_read=154072 bytes_retransmit=0 bytes_invalid=0 send_seq=5138 receive_seq=5138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001556 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2692 bytes_read=10212 bytes_retransmit=0 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999936 adj=49999479  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.3 chamber: temp=19.8 sysload=0.67 cputime=46.236 memavail=695420 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.4 pwm=0.000
Stats 719.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=97535 bytes_read=154563 bytes_retransmit=0 bytes_invalid=0 send_seq=5153 receive_seq=5153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001548 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2698 bytes_read=10228 bytes_retransmit=0 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999933 adj=49999418  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.5 chamber: temp=19.8 sysload=0.67 cputime=46.328 memavail=695432 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.8 pwm=0.000
Stats 720.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=97709 bytes_read=155044 bytes_retransmit=0 bytes_invalid=0 send_seq=5166 receive_seq=5166 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001548 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2704 bytes_read=10244 bytes_retransmit=0 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999930 adj=49999431  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.5 chamber: temp=19.8 sysload=0.67 cputime=46.436 memavail=695432 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.2 pwm=0.000
Stats 721.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=97932 bytes_read=155561 bytes_retransmit=0 bytes_invalid=0 send_seq=5180 receive_seq=5180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001546 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2716 bytes_read=10276 bytes_retransmit=0 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999926 adj=49999393  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.4 chamber: temp=19.8 sysload=0.67 cputime=46.552 memavail=695332 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.3 pwm=0.000
Stats 722.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=98158 bytes_read=156040 bytes_retransmit=0 bytes_invalid=0 send_seq=5195 receive_seq=5195 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001548 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2722 bytes_read=10292 bytes_retransmit=0 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999925 adj=49999369  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.69 cputime=46.665 memavail=695688 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.7 pwm=0.000
Stats 723.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=98332 bytes_read=156553 bytes_retransmit=0 bytes_invalid=0 send_seq=5208 receive_seq=5208 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2728 bytes_read=10321 bytes_retransmit=0 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999923 adj=49999375  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.69 cputime=46.779 memavail=695688 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.1 pwm=0.000
Stats 724.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=98555 bytes_read=157057 bytes_retransmit=0 bytes_invalid=0 send_seq=5222 receive_seq=5222 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001539 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2734 bytes_read=10337 bytes_retransmit=0 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999923 adj=49999391  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.69 cputime=46.900 memavail=695688 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.3 pwm=0.000
Stats 725.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=98783 bytes_read=157536 bytes_retransmit=0 bytes_invalid=0 send_seq=5237 receive_seq=5237 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001538 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2740 bytes_read=10353 bytes_retransmit=0 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999924 adj=49999444  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.8 sysload=0.69 cputime=47.013 memavail=695696 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.7 pwm=0.000
Stats 726.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=98957 bytes_read=158049 bytes_retransmit=0 bytes_invalid=0 send_seq=5250 receive_seq=5250 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001536 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2746 bytes_read=10369 bytes_retransmit=0 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999924 adj=49999470  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.69 cputime=47.124 memavail=695712 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.1 pwm=0.000
Stats 727.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=99199 bytes_read=158543 bytes_retransmit=0 bytes_invalid=0 send_seq=5265 receive_seq=5265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001533 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2752 bytes_read=10385 bytes_retransmit=0 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999926 adj=49999494  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.5 chamber: temp=19.8 sysload=0.72 cputime=47.241 memavail=695712 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.3 pwm=0.000
Stats 728.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=99421 bytes_read=159022 bytes_retransmit=0 bytes_invalid=0 send_seq=5280 receive_seq=5280 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001528 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=2758 bytes_read=10414 bytes_retransmit=0 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999924 adj=49999533  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.9 sysload=0.72 cputime=47.343 memavail=695456 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.8 pwm=0.000
Stats 729.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=99595 bytes_read=159550 bytes_retransmit=0 bytes_invalid=0 send_seq=5293 receive_seq=5293 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001526 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=2764 bytes_read=10430 bytes_retransmit=0 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999925 adj=49999513  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.7 chamber: temp=19.8 sysload=0.72 cputime=47.455 memavail=695456 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.2 pwm=0.000
Stats 730.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=99818 bytes_read=160039 bytes_retransmit=0 bytes_invalid=0 send_seq=5307 receive_seq=5307 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001531 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=2770 bytes_read=10446 bytes_retransmit=0 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999923 adj=49999538  heater_bed: target=0 temp=19.8 pwm=0.000 raspberry_pi: temp=38.1 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.72 cputime=47.565 memavail=695456 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.4 pwm=0.000
Stats 731.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=100046 bytes_read=160518 bytes_retransmit=0 bytes_invalid=0 send_seq=5322 receive_seq=5322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001524 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=2776 bytes_read=10462 bytes_retransmit=0 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999918 adj=49999472  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.72 cputime=47.674 memavail=695572 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.8 pwm=0.000
Stats 732.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=100220 bytes_read=161031 bytes_retransmit=0 bytes_invalid=0 send_seq=5335 receive_seq=5335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001529 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=2782 bytes_read=10478 bytes_retransmit=0 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999916 adj=49999441  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.6 chamber: temp=19.8 sysload=0.74 cputime=47.783 memavail=695588 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.3 pwm=0.000
Stats 733.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=100443 bytes_read=161525 bytes_retransmit=0 bytes_invalid=0 send_seq=5350 receive_seq=5350 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001531 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2788 bytes_read=10507 bytes_retransmit=0 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999913 adj=49999395  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.7 chamber: temp=19.8 sysload=0.74 cputime=47.898 memavail=695716 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.5 pwm=0.000
Stats 734.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=100617 bytes_read=162009 bytes_retransmit=0 bytes_invalid=0 send_seq=5363 receive_seq=5363 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001526 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2794 bytes_read=10523 bytes_retransmit=0 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999915 adj=49999375  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.8 sysload=0.74 cputime=48.021 memavail=695720 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.9 pwm=0.000
Stats 735.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=100840 bytes_read=162527 bytes_retransmit=0 bytes_invalid=0 send_seq=5377 receive_seq=5377 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001527 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2800 bytes_read=10539 bytes_retransmit=0 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999913 adj=49999442  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.7 sysload=0.74 cputime=48.135 memavail=695720 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.4 pwm=0.000
Stats 736.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=101068 bytes_read=163021 bytes_retransmit=0 bytes_invalid=0 send_seq=5392 receive_seq=5392 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001526 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2806 bytes_read=10555 bytes_retransmit=0 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999912 adj=49999424  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.8 chamber: temp=19.8 sysload=0.74 cputime=48.255 memavail=695720 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.6 pwm=0.000
Stats 737.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=101242 bytes_read=163490 bytes_retransmit=0 bytes_invalid=0 send_seq=5405 receive_seq=5405 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001519 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2812 bytes_read=10571 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999908 adj=49999430  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.9 sysload=0.84 cputime=48.354 memavail=695728 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.1 pwm=0.000
Stats 738.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=101463 bytes_read=164001 bytes_retransmit=0 bytes_invalid=0 send_seq=5419 receive_seq=5419 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001516 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2818 bytes_read=10599 bytes_retransmit=0 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999906 adj=49999413  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=32.8 chamber: temp=19.7 sysload=0.84 cputime=48.480 memavail=695728 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.5 pwm=0.000
Stats 739.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=101691 bytes_read=164496 bytes_retransmit=0 bytes_invalid=0 send_seq=5434 receive_seq=5434 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001513 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2824 bytes_read=10614 bytes_retransmit=0 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999904 adj=49999412  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.9 chamber: temp=19.8 sysload=0.84 cputime=48.602 memavail=695728 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.8 pwm=0.000
Stats 740.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=101865 bytes_read=164964 bytes_retransmit=0 bytes_invalid=0 send_seq=5447 receive_seq=5447 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001512 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2830 bytes_read=10629 bytes_retransmit=0 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999902 adj=49999409  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.8 chamber: temp=19.9 sysload=0.84 cputime=48.719 memavail=695984 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.3 pwm=0.000
Stats 741.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=102093 bytes_read=165487 bytes_retransmit=0 bytes_invalid=0 send_seq=5462 receive_seq=5462 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001510 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2836 bytes_read=10644 bytes_retransmit=0 bytes_invalid=0 send_seq=447 receive_seq=447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999901 adj=49999410  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.7 sysload=0.84 cputime=48.840 memavail=695380 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.7 pwm=0.000
Stats 742.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=102267 bytes_read=165971 bytes_retransmit=0 bytes_invalid=0 send_seq=5475 receive_seq=5475 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2842 bytes_read=10659 bytes_retransmit=0 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999901 adj=49999417  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.7 sysload=0.86 cputime=48.955 memavail=695480 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.0 pwm=0.000
Stats 743.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=102504 bytes_read=166445 bytes_retransmit=0 bytes_invalid=0 send_seq=5489 receive_seq=5489 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001509 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=2848 bytes_read=10675 bytes_retransmit=0 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999896 adj=49999459  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.9 chamber: temp=19.8 sysload=0.86 cputime=49.055 memavail=695744 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.5 pwm=0.000
Stats 744.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=102726 bytes_read=166983 bytes_retransmit=0 bytes_invalid=0 send_seq=5504 receive_seq=5504 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2854 bytes_read=10704 bytes_retransmit=0 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999893 adj=49999367  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.7 chamber: temp=19.8 sysload=0.86 cputime=49.169 memavail=695744 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.8 pwm=0.000
Stats 745.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=102906 bytes_read=167467 bytes_retransmit=0 bytes_invalid=0 send_seq=5518 receive_seq=5517 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001499 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2860 bytes_read=10720 bytes_retransmit=0 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999893 adj=49999379  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.0 chamber: temp=19.7 sysload=0.86 cputime=49.284 memavail=695744 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.3 pwm=0.000
Stats 746.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=103134 bytes_read=167977 bytes_retransmit=0 bytes_invalid=0 send_seq=5533 receive_seq=5533 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001502 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2866 bytes_read=10736 bytes_retransmit=0 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999892 adj=49999408  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.86 cputime=49.403 memavail=695492 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.7 pwm=0.000
Stats 747.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=103308 bytes_read=168490 bytes_retransmit=0 bytes_invalid=0 send_seq=5546 receive_seq=5546 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001501 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2872 bytes_read=10752 bytes_retransmit=0 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999892 adj=49999402  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.87 cputime=49.521 memavail=695492 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.1 pwm=0.000
Stats 748.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=103531 bytes_read=168964 bytes_retransmit=0 bytes_invalid=0 send_seq=5560 receive_seq=5560 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001500 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2878 bytes_read=10768 bytes_retransmit=0 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999894 adj=49999433  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.8 chamber: temp=19.7 sysload=0.87 cputime=49.635 memavail=695492 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.5 pwm=0.000
Stats 749.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=103705 bytes_read=169463 bytes_retransmit=0 bytes_invalid=0 send_seq=5573 receive_seq=5573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001499 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2884 bytes_read=10797 bytes_retransmit=0 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999896 adj=49999476  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.9 chamber: temp=19.8 sysload=0.87 cputime=49.752 memavail=695740 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.0 pwm=0.000
Stats 750.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=103923 bytes_read=169981 bytes_retransmit=0 bytes_invalid=0 send_seq=5587 receive_seq=5587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001499 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2890 bytes_read=10813 bytes_retransmit=0 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999894 adj=49999505  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.9 chamber: temp=19.7 sysload=0.87 cputime=49.864 memavail=695740 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.3 pwm=0.000
Stats 751.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=104151 bytes_read=170460 bytes_retransmit=0 bytes_invalid=0 send_seq=5602 receive_seq=5602 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001502 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2896 bytes_read=10829 bytes_retransmit=0 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999893 adj=49999475  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.8 chamber: temp=19.7 sysload=0.87 cputime=49.978 memavail=695904 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.8 pwm=0.000
Stats 752.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=104325 bytes_read=170944 bytes_retransmit=0 bytes_invalid=0 send_seq=5615 receive_seq=5615 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2902 bytes_read=10845 bytes_retransmit=0 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999888 adj=49999450  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.96 cputime=50.067 memavail=696252 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.3 pwm=0.000
Stats 753.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=104553 bytes_read=171467 bytes_retransmit=0 bytes_invalid=0 send_seq=5630 receive_seq=5630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2908 bytes_read=10861 bytes_retransmit=0 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999886 adj=49999364  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.8 chamber: temp=19.8 sysload=0.96 cputime=50.180 memavail=696252 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.7 pwm=0.000
Stats 754.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=104727 bytes_read=171951 bytes_retransmit=0 bytes_invalid=0 send_seq=5643 receive_seq=5643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2914 bytes_read=10890 bytes_retransmit=0 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999885 adj=49999359  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.96 cputime=50.298 memavail=696552 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.2 pwm=0.000
Stats 755.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=104948 bytes_read=172454 bytes_retransmit=0 bytes_invalid=0 send_seq=5657 receive_seq=5657 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001506 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2920 bytes_read=10906 bytes_retransmit=0 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999883 adj=49999362  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.96 cputime=50.420 memavail=696516 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.7 pwm=0.000
Stats 756.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=105122 bytes_read=172953 bytes_retransmit=0 bytes_invalid=0 send_seq=5670 receive_seq=5670 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001505 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2926 bytes_read=10922 bytes_retransmit=0 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999880 adj=49999364  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.1 chamber: temp=19.8 sysload=0.96 cputime=50.536 memavail=696516 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.0 pwm=0.000
Stats 757.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=105345 bytes_read=173427 bytes_retransmit=0 bytes_invalid=0 send_seq=5684 receive_seq=5684 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2932 bytes_read=10938 bytes_retransmit=0 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999878 adj=49999336  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.8 sysload=0.96 cputime=50.646 memavail=696192 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.6 pwm=0.000
Stats 758.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=105519 bytes_read=173940 bytes_retransmit=0 bytes_invalid=0 send_seq=5697 receive_seq=5697 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=2938 bytes_read=10954 bytes_retransmit=0 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999876 adj=49999338  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.1 chamber: temp=19.8 sysload=0.96 cputime=50.757 memavail=696264 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.1 pwm=0.000
Stats 759.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=105742 bytes_read=174444 bytes_retransmit=0 bytes_invalid=0 send_seq=5711 receive_seq=5711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001507 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2944 bytes_read=10983 bytes_retransmit=0 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999873 adj=49999345  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=32.9 chamber: temp=19.8 sysload=0.96 cputime=50.875 memavail=696264 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.5 pwm=0.000
Stats 760.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=105916 bytes_read=174913 bytes_retransmit=0 bytes_invalid=0 send_seq=5724 receive_seq=5724 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001511 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2950 bytes_read=10999 bytes_retransmit=0 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999874 adj=49999314  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.96 cputime=50.991 memavail=696264 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.0 pwm=0.000
Stats 761.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=106202 bytes_read=175436 bytes_retransmit=0 bytes_invalid=0 send_seq=5739 receive_seq=5739 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001509 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2956 bytes_read=11015 bytes_retransmit=0 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999873 adj=49999338  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.1 chamber: temp=19.8 sysload=0.96 cputime=51.110 memavail=695988 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.5 pwm=0.000
Stats 762.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=106424 bytes_read=175920 bytes_retransmit=0 bytes_invalid=0 send_seq=5754 receive_seq=5754 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001507 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2962 bytes_read=11031 bytes_retransmit=0 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999876 adj=49999364  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.0 chamber: temp=19.8 sysload=0.97 cputime=51.227 memavail=696024 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.9 pwm=0.000
Stats 763.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=106598 bytes_read=176377 bytes_retransmit=0 bytes_invalid=0 send_seq=5767 receive_seq=5767 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001511 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=2968 bytes_read=11047 bytes_retransmit=0 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999877 adj=49999442  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.1 chamber: temp=19.8 sysload=0.97 cputime=51.343 memavail=694112 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000
Stats 764.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=106826 bytes_read=176915 bytes_retransmit=0 bytes_invalid=0 send_seq=5782 receive_seq=5782 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001508 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2974 bytes_read=11076 bytes_retransmit=0 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999873 adj=49999448  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.2 chamber: temp=19.8 sysload=0.97 cputime=51.441 memavail=695784 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.0 pwm=0.000
Stats 765.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=107000 bytes_read=177399 bytes_retransmit=0 bytes_invalid=0 send_seq=5795 receive_seq=5795 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2980 bytes_read=11092 bytes_retransmit=0 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999875 adj=49999403  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=0.97 cputime=51.559 memavail=695784 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.3 pwm=0.000
Stats 766.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=107228 bytes_read=177878 bytes_retransmit=0 bytes_invalid=0 send_seq=5810 receive_seq=5810 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2986 bytes_read=11108 bytes_retransmit=0 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999875 adj=49999458  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.7 sysload=0.97 cputime=51.669 memavail=695396 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.9 pwm=0.000
Stats 767.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=107402 bytes_read=178391 bytes_retransmit=0 bytes_invalid=0 send_seq=5823 receive_seq=5823 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2992 bytes_read=11124 bytes_retransmit=0 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999873 adj=49999458  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.7 sysload=0.97 cputime=51.776 memavail=695532 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.4 pwm=0.000
Stats 768.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=107625 bytes_read=178900 bytes_retransmit=0 bytes_invalid=0 send_seq=5838 receive_seq=5838 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001501 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=2998 bytes_read=11140 bytes_retransmit=0 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999870 adj=49999440  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.7 sysload=0.97 cputime=51.897 memavail=695532 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.8 pwm=0.000
Stats 769.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=107799 bytes_read=179369 bytes_retransmit=0 bytes_invalid=0 send_seq=5851 receive_seq=5851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001497 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3004 bytes_read=11169 bytes_retransmit=0 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999868 adj=49999404  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.8 sysload=0.97 cputime=52.011 memavail=695532 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.4 pwm=0.000
Stats 770.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=108027 bytes_read=179892 bytes_retransmit=0 bytes_invalid=0 send_seq=5866 receive_seq=5866 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3010 bytes_read=11185 bytes_retransmit=0 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999866 adj=49999391  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=0.97 cputime=52.129 memavail=695544 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.0 pwm=0.000
Stats 771.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=108201 bytes_read=180376 bytes_retransmit=0 bytes_invalid=0 send_seq=5879 receive_seq=5879 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3016 bytes_read=11201 bytes_retransmit=0 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999863 adj=49999385  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.9 sysload=0.97 cputime=52.240 memavail=695788 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.4 pwm=0.000
Stats 772.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000009 bytes_write=108429 bytes_read=180855 bytes_retransmit=0 bytes_invalid=0 send_seq=5894 receive_seq=5894 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001488 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3022 bytes_read=11217 bytes_retransmit=0 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999862 adj=49999369  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.9 sysload=1.05 cputime=52.327 memavail=696000 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.9 pwm=0.000
Stats 773.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=108603 bytes_read=181383 bytes_retransmit=0 bytes_invalid=0 send_seq=5907 receive_seq=5907 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3028 bytes_read=11233 bytes_retransmit=0 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999859 adj=49999392  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.1 chamber: temp=19.7 sysload=1.05 cputime=52.438 memavail=696040 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.5 pwm=0.000
Stats 774.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=108829 bytes_read=181877 bytes_retransmit=0 bytes_invalid=0 send_seq=5922 receive_seq=5922 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=3034 bytes_read=11262 bytes_retransmit=0 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999857 adj=49999341  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=1.05 cputime=52.555 memavail=696040 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.9 pwm=0.000
Stats 775.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=109003 bytes_read=182361 bytes_retransmit=0 bytes_invalid=0 send_seq=5935 receive_seq=5935 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001489 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=3040 bytes_read=11278 bytes_retransmit=0 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1 freq=49999856 adj=49999334  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.1 chamber: temp=19.8 sysload=1.05 cputime=52.671 memavail=695936 print_time=620.709 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.5 pwm=0.000
Stats 776.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=109231 bytes_read=182884 bytes_retransmit=0 bytes_invalid=0 send_seq=5950 receive_seq=5950 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=180001487 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=3052 bytes_read=11310 bytes_retransmit=0 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999862 adj=49999361  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.2 chamber: temp=19.8 sysload=1.05 cputime=52.803 memavail=696052 print_time=778.018 buffer_time=0.385 print_stall=0 extruder: target=0 temp=90.9 pwm=0.000
Stats 777.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=109784 bytes_read=183127 bytes_retransmit=0 bytes_invalid=0 send_seq=5961 receive_seq=5961 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001486 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=3058 bytes_read=11326 bytes_retransmit=0 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999862 adj=49999490  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=1.05 cputime=52.901 memavail=696052 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.5 pwm=0.000
Stats 778.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000031 bytes_write=110284 bytes_read=183395 bytes_retransmit=0 bytes_invalid=0 send_seq=5971 receive_seq=5971 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001493 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=3064 bytes_read=11342 bytes_retransmit=0 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999864 adj=49999494  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=1.05 cputime=52.989 memavail=695680 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.1 pwm=0.000
Stats 779.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000031 bytes_write=110344 bytes_read=183642 bytes_retransmit=0 bytes_invalid=0 send_seq=5974 receive_seq=5974 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3070 bytes_read=11371 bytes_retransmit=0 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999867 adj=49999484  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.05 cputime=53.066 memavail=695812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.5 pwm=0.000
Stats 780.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000031 bytes_write=110350 bytes_read=183835 bytes_retransmit=0 bytes_invalid=0 send_seq=5975 receive_seq=5975 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001500 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3076 bytes_read=11387 bytes_retransmit=0 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999866 adj=49999480  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.7 sysload=1.05 cputime=53.139 memavail=695812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.1 pwm=0.000
Stats 781.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000031 bytes_write=110418 bytes_read=184053 bytes_retransmit=0 bytes_invalid=0 send_seq=5978 receive_seq=5978 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001498 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3082 bytes_read=11403 bytes_retransmit=0 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999864 adj=49999462  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.05 cputime=53.216 memavail=695676 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.7 pwm=0.000
Stats 782.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000031 bytes_write=110424 bytes_read=184290 bytes_retransmit=0 bytes_invalid=0 send_seq=5979 receive_seq=5979 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3088 bytes_read=11419 bytes_retransmit=0 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999861 adj=49999440  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.04 cputime=53.293 memavail=695812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.1 pwm=0.000
Stats 783.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000012 mcu_task_stddev=0.000031 bytes_write=110478 bytes_read=184493 bytes_retransmit=0 bytes_invalid=0 send_seq=5982 receive_seq=5982 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001490 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3094 bytes_read=11435 bytes_retransmit=0 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999858 adj=49999419  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.04 cputime=53.372 memavail=695812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.7 pwm=0.000
Stats 784.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=110484 bytes_read=184716 bytes_retransmit=0 bytes_invalid=0 send_seq=5983 receive_seq=5983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001489 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3100 bytes_read=11464 bytes_retransmit=0 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999856 adj=49999401  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.04 cputime=53.448 memavail=695708 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.3 pwm=0.000
Stats 785.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=110544 bytes_read=184963 bytes_retransmit=0 bytes_invalid=0 send_seq=5986 receive_seq=5986 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001487 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3106 bytes_read=11480 bytes_retransmit=0 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999856 adj=49999379  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=1.04 cputime=53.526 memavail=695816 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.8 pwm=0.000
Stats 786.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=110550 bytes_read=185144 bytes_retransmit=0 bytes_invalid=0 send_seq=5987 receive_seq=5987 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001488 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3112 bytes_read=11496 bytes_retransmit=0 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999854 adj=49999397  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.04 cputime=53.599 memavail=695816 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.4 pwm=0.000
Stats 787.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=110610 bytes_read=185367 bytes_retransmit=0 bytes_invalid=0 send_seq=5990 receive_seq=5990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001497 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3118 bytes_read=11512 bytes_retransmit=0 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999853 adj=49999384  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=1.20 cputime=53.679 memavail=695712 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.0 pwm=0.000
Stats 788.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=110616 bytes_read=185590 bytes_retransmit=0 bytes_invalid=0 send_seq=5991 receive_seq=5991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3124 bytes_read=11528 bytes_retransmit=0 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999856 adj=49999341  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.20 cputime=53.750 memavail=695824 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.5 pwm=0.000
Stats 789.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110622 bytes_read=185798 bytes_retransmit=0 bytes_invalid=0 send_seq=5992 receive_seq=5992 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3130 bytes_read=11557 bytes_retransmit=0 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999859 adj=49999416  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.7 sysload=1.20 cputime=53.824 memavail=695824 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.1 pwm=0.000
Stats 790.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110677 bytes_read=186045 bytes_retransmit=0 bytes_invalid=0 send_seq=5995 receive_seq=5995 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001489 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3136 bytes_read=11573 bytes_retransmit=0 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999859 adj=49999490  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.20 cputime=53.897 memavail=695720 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.7 pwm=0.000
Stats 791.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110683 bytes_read=186253 bytes_retransmit=0 bytes_invalid=0 send_seq=5996 receive_seq=5996 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001490 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3142 bytes_read=11589 bytes_retransmit=0 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999859 adj=49999478  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.20 cputime=53.969 memavail=695680 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.2 pwm=0.000
Stats 792.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110743 bytes_read=186456 bytes_retransmit=0 bytes_invalid=0 send_seq=5999 receive_seq=5999 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001487 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3148 bytes_read=11605 bytes_retransmit=0 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999859 adj=49999469  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=1.10 cputime=54.049 memavail=695836 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.8 pwm=0.000
Stats 793.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110749 bytes_read=186693 bytes_retransmit=0 bytes_invalid=0 send_seq=6000 receive_seq=6000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001484 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3154 bytes_read=11621 bytes_retransmit=0 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999857 adj=49999477  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.1 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.10 cputime=54.125 memavail=695732 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.4 pwm=0.000
Stats 794.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110809 bytes_read=186926 bytes_retransmit=0 bytes_invalid=0 send_seq=6003 receive_seq=6003 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001483 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3160 bytes_read=11650 bytes_retransmit=0 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999855 adj=49999461  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.10 cputime=54.204 memavail=695836 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.9 pwm=0.000
Stats 795.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110815 bytes_read=187119 bytes_retransmit=0 bytes_invalid=0 send_seq=6004 receive_seq=6004 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3166 bytes_read=11666 bytes_retransmit=0 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999852 adj=49999419  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.10 cputime=54.283 memavail=695836 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.6 pwm=0.000
Stats 796.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110873 bytes_read=187366 bytes_retransmit=0 bytes_invalid=0 send_seq=6007 receive_seq=6007 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001478 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3172 bytes_read=11682 bytes_retransmit=0 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999850 adj=49999399  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.10 cputime=54.363 memavail=695732 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.2 pwm=0.000
Stats 797.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110879 bytes_read=187574 bytes_retransmit=0 bytes_invalid=0 send_seq=6008 receive_seq=6008 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3178 bytes_read=11698 bytes_retransmit=0 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999847 adj=49999385  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.6 sysload=1.02 cputime=54.442 memavail=695840 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.7 pwm=0.000
Stats 798.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110885 bytes_read=187767 bytes_retransmit=0 bytes_invalid=0 send_seq=6009 receive_seq=6009 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3184 bytes_read=11714 bytes_retransmit=0 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999846 adj=49999368  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.02 cputime=54.521 memavail=695840 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.3 pwm=0.000
Stats 799.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110945 bytes_read=188029 bytes_retransmit=0 bytes_invalid=0 send_seq=6012 receive_seq=6012 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001474 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3190 bytes_read=11743 bytes_retransmit=0 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999360  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.02 cputime=54.598 memavail=695736 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.9 pwm=0.000
Stats 800.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=110957 bytes_read=188237 bytes_retransmit=0 bytes_invalid=0 send_seq=6014 receive_seq=6013 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001473 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3196 bytes_read=11759 bytes_retransmit=0 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999330  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.7 sysload=1.02 cputime=54.672 memavail=695852 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.4 pwm=0.000
Stats 801.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111017 bytes_read=188456 bytes_retransmit=0 bytes_invalid=0 send_seq=6017 receive_seq=6017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001480 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3202 bytes_read=11775 bytes_retransmit=0 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999336  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.02 cputime=54.754 memavail=695584 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.1 pwm=0.000
Stats 802.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111023 bytes_read=188693 bytes_retransmit=0 bytes_invalid=0 send_seq=6018 receive_seq=6018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3208 bytes_read=11791 bytes_retransmit=0 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999847 adj=49999357  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=0.93 cputime=54.826 memavail=695496 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.7 pwm=0.000
Stats 803.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111029 bytes_read=188901 bytes_retransmit=0 bytes_invalid=0 send_seq=6019 receive_seq=6019 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001474 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=3214 bytes_read=11807 bytes_retransmit=0 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999849 adj=49999474  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=0.93 cputime=54.899 memavail=695496 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.3 pwm=0.000
Stats 804.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111103 bytes_read=189119 bytes_retransmit=0 bytes_invalid=0 send_seq=6022 receive_seq=6022 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001473 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3220 bytes_read=11836 bytes_retransmit=0 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999847 adj=49999491  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=0.93 cputime=54.975 memavail=695496 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.9 pwm=0.000
Stats 805.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111109 bytes_read=189356 bytes_retransmit=0 bytes_invalid=0 send_seq=6023 receive_seq=6023 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001473 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3226 bytes_read=11852 bytes_retransmit=0 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999847 adj=49999454  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=0.93 cputime=55.047 memavail=695496 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.6 pwm=0.000
Stats 806.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111163 bytes_read=189574 bytes_retransmit=0 bytes_invalid=0 send_seq=6026 receive_seq=6026 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001472 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3232 bytes_read=11868 bytes_retransmit=0 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999847 adj=49999455  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=0.93 cputime=55.123 memavail=695612 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.1 pwm=0.000
Stats 807.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111182 bytes_read=189787 bytes_retransmit=0 bytes_invalid=0 send_seq=6028 receive_seq=6028 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3238 bytes_read=11884 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999846 adj=49999450  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.86 cputime=55.203 memavail=695612 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.8 pwm=0.000
Stats 808.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111188 bytes_read=190024 bytes_retransmit=0 bytes_invalid=0 send_seq=6029 receive_seq=6029 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001464 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=3244 bytes_read=11900 bytes_retransmit=0 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999844 adj=49999455  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.1 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=0.86 cputime=55.274 memavail=695460 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.3 pwm=0.000
Stats 809.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=111248 bytes_read=190241 bytes_retransmit=0 bytes_invalid=0 send_seq=6032 receive_seq=6032 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001462 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3250 bytes_read=11929 bytes_retransmit=0 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999433  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.86 cputime=55.345 memavail=695516 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.0 pwm=0.000
Stats 810.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=111254 bytes_read=190435 bytes_retransmit=0 bytes_invalid=0 send_seq=6033 receive_seq=6033 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3256 bytes_read=11945 bytes_retransmit=0 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999840 adj=49999412  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.86 cputime=55.417 memavail=695612 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.6 pwm=0.000
Stats 811.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=111260 bytes_read=190666 bytes_retransmit=0 bytes_invalid=0 send_seq=6034 receive_seq=6034 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001458 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3262 bytes_read=11961 bytes_retransmit=0 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999837 adj=49999392  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.7 sysload=0.86 cputime=55.493 memavail=695492 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.2 pwm=0.000
Stats 812.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=111315 bytes_read=190864 bytes_retransmit=0 bytes_invalid=0 send_seq=6036 receive_seq=6036 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001457 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3268 bytes_read=11977 bytes_retransmit=0 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999838 adj=49999365  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.7 sysload=0.79 cputime=55.567 memavail=695616 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000
Stats 813.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000013 bytes_write=111321 bytes_read=191086 bytes_retransmit=0 bytes_invalid=0 send_seq=6037 receive_seq=6037 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001458 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3274 bytes_read=11993 bytes_retransmit=0 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999839 adj=49999398  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.79 cputime=55.642 memavail=695616 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.5 pwm=0.000
Stats 814.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111376 bytes_read=191334 bytes_retransmit=0 bytes_invalid=0 send_seq=6040 receive_seq=6040 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001460 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3280 bytes_read=12022 bytes_retransmit=0 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999840 adj=49999428  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.79 cputime=55.716 memavail=695268 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 815.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111382 bytes_read=191527 bytes_retransmit=0 bytes_invalid=0 send_seq=6041 receive_seq=6041 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3286 bytes_read=12038 bytes_retransmit=0 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999429  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=0.79 cputime=55.788 memavail=695376 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.7 pwm=0.000
Stats 816.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111388 bytes_read=191764 bytes_retransmit=0 bytes_invalid=0 send_seq=6042 receive_seq=6042 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3292 bytes_read=12054 bytes_retransmit=0 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999840 adj=49999471  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=0.79 cputime=55.862 memavail=695376 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.4 pwm=0.000
Stats 817.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111448 bytes_read=191982 bytes_retransmit=0 bytes_invalid=0 send_seq=6045 receive_seq=6045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3298 bytes_read=12070 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999838 adj=49999423  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.5 chamber: temp=19.9 sysload=0.73 cputime=55.935 memavail=695272 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.0 pwm=0.000
Stats 818.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111454 bytes_read=192175 bytes_retransmit=0 bytes_invalid=0 send_seq=6046 receive_seq=6046 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3304 bytes_read=12086 bytes_retransmit=0 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999837 adj=49999400  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.9 sysload=0.73 cputime=56.012 memavail=695124 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.7 pwm=0.000
Stats 819.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111460 bytes_read=192427 bytes_retransmit=0 bytes_invalid=0 send_seq=6047 receive_seq=6047 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3310 bytes_read=12115 bytes_retransmit=0 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999836 adj=49999385  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=0.73 cputime=56.087 memavail=695124 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.4 pwm=0.000
Stats 820.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111520 bytes_read=192645 bytes_retransmit=0 bytes_invalid=0 send_seq=6050 receive_seq=6050 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3316 bytes_read=12131 bytes_retransmit=0 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999835 adj=49999380  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.73 cputime=56.160 memavail=695124 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.0 pwm=0.000
Stats 821.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111526 bytes_read=192838 bytes_retransmit=0 bytes_invalid=0 send_seq=6051 receive_seq=6051 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001458 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3322 bytes_read=12147 bytes_retransmit=0 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999834 adj=49999390  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.8 chamber: temp=19.7 sysload=0.73 cputime=56.233 memavail=695368 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000
Stats 822.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111532 bytes_read=193075 bytes_retransmit=0 bytes_invalid=0 send_seq=6052 receive_seq=6052 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001457 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3328 bytes_read=12163 bytes_retransmit=0 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999829 adj=49999379  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.7 sysload=0.67 cputime=56.297 memavail=695388 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.3 pwm=0.000
Stats 823.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111590 bytes_read=193293 bytes_retransmit=0 bytes_invalid=0 send_seq=6055 receive_seq=6055 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001456 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3334 bytes_read=12179 bytes_retransmit=0 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999828 adj=49999318  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.9 sysload=0.67 cputime=56.378 memavail=695284 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 824.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111596 bytes_read=193501 bytes_retransmit=0 bytes_invalid=0 send_seq=6056 receive_seq=6056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001453 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3340 bytes_read=12207 bytes_retransmit=0 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999828 adj=49999350  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.8 chamber: temp=19.7 sysload=0.67 cputime=56.451 memavail=695388 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.6 pwm=0.000
Stats 825.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111602 bytes_read=193738 bytes_retransmit=0 bytes_invalid=0 send_seq=6057 receive_seq=6057 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001453 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3346 bytes_read=12222 bytes_retransmit=0 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999827 adj=49999377  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.67 cputime=56.529 memavail=695388 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.3 pwm=0.000
Stats 826.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111662 bytes_read=193956 bytes_retransmit=0 bytes_invalid=0 send_seq=6060 receive_seq=6060 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001460 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3352 bytes_read=12237 bytes_retransmit=0 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999827 adj=49999366  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.67 cputime=56.607 memavail=695536 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.8 pwm=0.000
Stats 827.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111668 bytes_read=194149 bytes_retransmit=0 bytes_invalid=0 send_seq=6061 receive_seq=6061 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001460 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3358 bytes_read=12252 bytes_retransmit=0 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999827 adj=49999357  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=0.69 cputime=56.676 memavail=695536 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.6 pwm=0.000
Stats 828.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111728 bytes_read=194396 bytes_retransmit=0 bytes_invalid=0 send_seq=6064 receive_seq=6064 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3370 bytes_read=12283 bytes_retransmit=0 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999829 adj=49999364  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=0.69 cputime=56.752 memavail=695652 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.3 pwm=0.000
Stats 829.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111734 bytes_read=194619 bytes_retransmit=0 bytes_invalid=0 send_seq=6065 receive_seq=6065 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=3376 bytes_read=12312 bytes_retransmit=0 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999830 adj=49999424  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=0.69 cputime=56.825 memavail=695624 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.9 pwm=0.000
Stats 830.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111740 bytes_read=194812 bytes_retransmit=0 bytes_invalid=0 send_seq=6066 receive_seq=6066 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001455 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=3382 bytes_read=12328 bytes_retransmit=0 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999845 adj=49999428  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.9 sysload=0.69 cputime=56.902 memavail=695664 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.6 pwm=0.000
Stats 831.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111746 bytes_read=195049 bytes_retransmit=0 bytes_invalid=0 send_seq=6067 receive_seq=6067 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001454 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=3388 bytes_read=12344 bytes_retransmit=0 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999678  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=0.69 cputime=56.974 memavail=695668 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000
Stats 832.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111820 bytes_read=195267 bytes_retransmit=0 bytes_invalid=0 send_seq=6070 receive_seq=6070 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001454 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=3394 bytes_read=12360 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999846 adj=49999582  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.5 chamber: temp=19.7 sysload=0.96 cputime=57.049 memavail=695580 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.9 pwm=0.000
Stats 833.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000011 bytes_write=111826 bytes_read=195456 bytes_retransmit=0 bytes_invalid=0 send_seq=6071 receive_seq=6071 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001453 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=3400 bytes_read=12376 bytes_retransmit=0 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999845 adj=49999613  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=0.96 cputime=57.124 memavail=695668 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.6 pwm=0.000
Stats 834.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111832 bytes_read=195706 bytes_retransmit=0 bytes_invalid=0 send_seq=6072 receive_seq=6072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001452 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3406 bytes_read=12405 bytes_retransmit=0 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999842 adj=49999557  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=0.96 cputime=57.203 memavail=695668 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.2 pwm=0.000
Stats 835.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111886 bytes_read=195908 bytes_retransmit=0 bytes_invalid=0 send_seq=6075 receive_seq=6075 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001451 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3412 bytes_read=12421 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999840 adj=49999491  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=0.96 cputime=57.273 memavail=695564 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.9 pwm=0.000
Stats 836.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111892 bytes_read=196116 bytes_retransmit=0 bytes_invalid=0 send_seq=6076 receive_seq=6076 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001449 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3418 bytes_read=12437 bytes_retransmit=0 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999836 adj=49999448  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.7 chamber: temp=19.9 sysload=0.96 cputime=57.343 memavail=695680 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 837.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111898 bytes_read=196353 bytes_retransmit=0 bytes_invalid=0 send_seq=6077 receive_seq=6077 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001450 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3424 bytes_read=12453 bytes_retransmit=0 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999832 adj=49999386  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=1.04 cputime=57.413 memavail=695680 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
Stats 838.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000012 bytes_write=111958 bytes_read=196556 bytes_retransmit=0 bytes_invalid=0 send_seq=6080 receive_seq=6080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001449 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3430 bytes_read=12469 bytes_retransmit=0 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999830 adj=49999331  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.04 cputime=57.486 memavail=695496 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.0 pwm=0.000
Stats 839.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111964 bytes_read=196779 bytes_retransmit=0 bytes_invalid=0 send_seq=6081 receive_seq=6081 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001449 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3436 bytes_read=12498 bytes_retransmit=0 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999828 adj=49999329  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.7 sysload=1.04 cputime=57.556 memavail=695680 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.7 pwm=0.000
Stats 840.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=111970 bytes_read=197016 bytes_retransmit=0 bytes_invalid=0 send_seq=6082 receive_seq=6082 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001451 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3442 bytes_read=12514 bytes_retransmit=0 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999829 adj=49999323  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.04 cputime=57.626 memavail=695680 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.4 pwm=0.000
Stats 841.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112030 bytes_read=197219 bytes_retransmit=0 bytes_invalid=0 send_seq=6085 receive_seq=6085 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3448 bytes_read=12530 bytes_retransmit=0 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999825 adj=49999355  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.7 chamber: temp=19.9 sysload=1.04 cputime=57.699 memavail=695368 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.1 pwm=0.000
Stats 842.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112036 bytes_read=197427 bytes_retransmit=0 bytes_invalid=0 send_seq=6086 receive_seq=6086 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3454 bytes_read=12546 bytes_retransmit=0 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999823 adj=49999245  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=1.04 cputime=57.768 memavail=695440 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.8 pwm=0.000
Stats 843.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112042 bytes_read=197664 bytes_retransmit=0 bytes_invalid=0 send_seq=6087 receive_seq=6087 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3460 bytes_read=12562 bytes_retransmit=0 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999821 adj=49999255  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=1.04 cputime=57.841 memavail=695440 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.5 pwm=0.000
Stats 844.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112097 bytes_read=197882 bytes_retransmit=0 bytes_invalid=0 send_seq=6090 receive_seq=6090 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3466 bytes_read=12591 bytes_retransmit=0 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999821 adj=49999265  heater_bed: target=0 temp=20.2 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.8 chamber: temp=19.9 sysload=1.04 cputime=57.918 memavail=695620 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.2 pwm=0.000
Stats 845.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112103 bytes_read=198104 bytes_retransmit=0 bytes_invalid=0 send_seq=6091 receive_seq=6091 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3472 bytes_read=12607 bytes_retransmit=0 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999821 adj=49999293  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.9 sysload=1.04 cputime=57.989 memavail=695620 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.9 pwm=0.000
Stats 846.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112109 bytes_read=198327 bytes_retransmit=0 bytes_invalid=0 send_seq=6092 receive_seq=6092 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3478 bytes_read=12623 bytes_retransmit=0 bytes_invalid=0 send_seq=554 receive_seq=554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999820 adj=49999326  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.04 cputime=58.060 memavail=695692 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.5 pwm=0.000
Stats 847.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112115 bytes_read=198520 bytes_retransmit=0 bytes_invalid=0 send_seq=6093 receive_seq=6093 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3484 bytes_read=12639 bytes_retransmit=0 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999821 adj=49999330  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.04 cputime=58.132 memavail=695608 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.3 pwm=0.000
Stats 848.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112175 bytes_read=198767 bytes_retransmit=0 bytes_invalid=0 send_seq=6096 receive_seq=6096 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001466 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3490 bytes_read=12655 bytes_retransmit=0 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999818 adj=49999380  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=1.04 cputime=58.207 memavail=695704 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.0 pwm=0.000
Stats 849.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112181 bytes_read=198990 bytes_retransmit=0 bytes_invalid=0 send_seq=6097 receive_seq=6097 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001464 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3496 bytes_read=12684 bytes_retransmit=0 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999815 adj=49999349  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=1.04 cputime=58.278 memavail=695704 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.7 pwm=0.000
Stats 850.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112187 bytes_read=199183 bytes_retransmit=0 bytes_invalid=0 send_seq=6098 receive_seq=6098 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001463 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3502 bytes_read=12700 bytes_retransmit=0 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999813 adj=49999316  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.04 cputime=58.355 memavail=695608 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.4 pwm=0.000
Stats 851.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112247 bytes_read=199430 bytes_retransmit=0 bytes_invalid=0 send_seq=6101 receive_seq=6101 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001463 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3508 bytes_read=12716 bytes_retransmit=0 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999813 adj=49999310  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.04 cputime=58.427 memavail=695952 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.2 pwm=0.000
Stats 852.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112253 bytes_read=199638 bytes_retransmit=0 bytes_invalid=0 send_seq=6102 receive_seq=6102 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001460 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3514 bytes_read=12732 bytes_retransmit=0 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999813 adj=49999339  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.8 chamber: temp=19.9 sysload=1.03 cputime=58.505 memavail=695952 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.8 pwm=0.000
Stats 853.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112259 bytes_read=199831 bytes_retransmit=0 bytes_invalid=0 send_seq=6103 receive_seq=6103 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001462 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3520 bytes_read=12748 bytes_retransmit=0 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999814 adj=49999373  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.03 cputime=58.584 memavail=696112 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.6 pwm=0.000
Stats 854.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112271 bytes_read=200083 bytes_retransmit=0 bytes_invalid=0 send_seq=6105 receive_seq=6104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001463 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3526 bytes_read=12777 bytes_retransmit=0 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999813 adj=49999381  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.03 cputime=58.655 memavail=696220 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.3 pwm=0.000
Stats 855.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112329 bytes_read=200317 bytes_retransmit=0 bytes_invalid=0 send_seq=6108 receive_seq=6108 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3532 bytes_read=12793 bytes_retransmit=0 bytes_invalid=0 send_seq=563 receive_seq=563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999814 adj=49999353  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.03 cputime=58.728 memavail=696220 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Stats 856.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112335 bytes_read=200510 bytes_retransmit=0 bytes_invalid=0 send_seq=6109 receive_seq=6109 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3538 bytes_read=12809 bytes_retransmit=0 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999811 adj=49999374  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=38.6 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.03 cputime=58.801 memavail=696108 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.8 pwm=0.000
Stats 857.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112341 bytes_read=200739 bytes_retransmit=0 bytes_invalid=0 send_seq=6110 receive_seq=6110 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3544 bytes_read=12825 bytes_retransmit=0 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999811 adj=49999349  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.8 chamber: temp=19.8 sysload=1.03 cputime=58.872 memavail=696232 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000
Stats 858.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112401 bytes_read=200944 bytes_retransmit=0 bytes_invalid=0 send_seq=6113 receive_seq=6113 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001466 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3550 bytes_read=12841 bytes_retransmit=0 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999811 adj=49999363  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.03 cputime=58.947 memavail=696232 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000
Stats 859.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112407 bytes_read=201152 bytes_retransmit=0 bytes_invalid=0 send_seq=6114 receive_seq=6114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001466 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3556 bytes_read=12870 bytes_retransmit=0 bytes_invalid=0 send_seq=567 receive_seq=567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999810 adj=49999373  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.03 cputime=59.018 memavail=696128 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 860.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112413 bytes_read=201389 bytes_retransmit=0 bytes_invalid=0 send_seq=6115 receive_seq=6115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001466 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3562 bytes_read=12886 bytes_retransmit=0 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999807 adj=49999362  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.03 cputime=59.089 memavail=696232 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.7 pwm=0.000
Stats 861.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112419 bytes_read=201597 bytes_retransmit=0 bytes_invalid=0 send_seq=6116 receive_seq=6116 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001463 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3568 bytes_read=12902 bytes_retransmit=0 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999805 adj=49999329  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.9 sysload=1.03 cputime=59.159 memavail=696244 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000
Stats 862.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112479 bytes_read=201800 bytes_retransmit=0 bytes_invalid=0 send_seq=6119 receive_seq=6119 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001462 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3574 bytes_read=12918 bytes_retransmit=0 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999802 adj=49999322  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.7 sysload=1.03 cputime=59.233 memavail=696140 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000
Stats 863.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112485 bytes_read=202037 bytes_retransmit=0 bytes_invalid=0 send_seq=6120 receive_seq=6120 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3580 bytes_read=12934 bytes_retransmit=0 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999799 adj=49999302  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.03 cputime=59.307 memavail=696244 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.9 pwm=0.000
Stats 864.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112491 bytes_read=202260 bytes_retransmit=0 bytes_invalid=0 send_seq=6121 receive_seq=6121 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001482 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3586 bytes_read=12950 bytes_retransmit=0 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999799 adj=49999286  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.03 cputime=59.382 memavail=696244 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.6 pwm=0.000
Stats 865.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112497 bytes_read=202468 bytes_retransmit=0 bytes_invalid=0 send_seq=6122 receive_seq=6122 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001482 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3592 bytes_read=12979 bytes_retransmit=0 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999799 adj=49999222  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.9 sysload=1.03 cputime=59.456 memavail=695900 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
Stats 866.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112585 bytes_read=202720 bytes_retransmit=0 bytes_invalid=0 send_seq=6126 receive_seq=6126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001479 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3598 bytes_read=12995 bytes_retransmit=0 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999797 adj=49999268  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.7 sysload=1.03 cputime=59.534 memavail=695900 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 867.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112591 bytes_read=202913 bytes_retransmit=0 bytes_invalid=0 send_seq=6127 receive_seq=6127 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001479 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3604 bytes_read=13011 bytes_retransmit=0 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999797 adj=49999274  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.5 chamber: temp=19.9 sysload=1.02 cputime=59.605 memavail=696004 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000
Stats 868.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112597 bytes_read=203121 bytes_retransmit=0 bytes_invalid=0 send_seq=6128 receive_seq=6128 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001475 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3610 bytes_read=13027 bytes_retransmit=0 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999800 adj=49999305  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.02 cputime=59.674 memavail=695980 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 869.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112603 bytes_read=203373 bytes_retransmit=0 bytes_invalid=0 send_seq=6129 receive_seq=6129 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001475 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=3616 bytes_read=13043 bytes_retransmit=0 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999803 adj=49999394  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.02 cputime=59.750 memavail=696004 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 870.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112657 bytes_read=203576 bytes_retransmit=0 bytes_invalid=0 send_seq=6132 receive_seq=6132 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3622 bytes_read=13072 bytes_retransmit=0 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999800 adj=49999426  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.5 chamber: temp=19.9 sysload=1.02 cputime=59.822 memavail=696004 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.1 pwm=0.000
Stats 871.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112663 bytes_read=203784 bytes_retransmit=0 bytes_invalid=0 send_seq=6133 receive_seq=6133 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001475 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3628 bytes_read=13088 bytes_retransmit=0 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999799 adj=49999374  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.02 cputime=59.891 memavail=695596 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 872.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112669 bytes_read=204021 bytes_retransmit=0 bytes_invalid=0 send_seq=6134 receive_seq=6134 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001474 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3634 bytes_read=13104 bytes_retransmit=0 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999797 adj=49999370  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.9 sysload=1.02 cputime=59.965 memavail=695772 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.6 pwm=0.000
Stats 873.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112675 bytes_read=204214 bytes_retransmit=0 bytes_invalid=0 send_seq=6135 receive_seq=6135 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001477 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3640 bytes_read=13120 bytes_retransmit=0 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999798 adj=49999352  heater_bed: target=0 temp=19.9 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.9 sysload=1.02 cputime=60.035 memavail=695772 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 874.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112735 bytes_read=204461 bytes_retransmit=0 bytes_invalid=0 send_seq=6138 receive_seq=6138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=3646 bytes_read=13136 bytes_retransmit=0 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999795 adj=49999352  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.02 cputime=60.110 memavail=695668 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.1 pwm=0.000
Stats 875.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112741 bytes_read=204684 bytes_retransmit=0 bytes_invalid=0 send_seq=6139 receive_seq=6139 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3652 bytes_read=13165 bytes_retransmit=0 bytes_invalid=0 send_seq=583 receive_seq=583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999793 adj=49999327  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.02 cputime=60.185 memavail=695668 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 876.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112747 bytes_read=204877 bytes_retransmit=0 bytes_invalid=0 send_seq=6140 receive_seq=6140 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001479 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3658 bytes_read=13181 bytes_retransmit=0 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999791 adj=49999300  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.9 sysload=1.02 cputime=60.261 memavail=695772 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
Stats 877.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112753 bytes_read=205114 bytes_retransmit=0 bytes_invalid=0 send_seq=6141 receive_seq=6141 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001478 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3664 bytes_read=13197 bytes_retransmit=0 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999289  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=19.8 sysload=1.02 cputime=60.334 memavail=695532 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000
Stats 878.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000010 bytes_write=112813 bytes_read=205332 bytes_retransmit=0 bytes_invalid=0 send_seq=6144 receive_seq=6144 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3670 bytes_read=13213 bytes_retransmit=0 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999270  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.02 cputime=60.411 memavail=695532 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
Stats 879.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112819 bytes_read=205540 bytes_retransmit=0 bytes_invalid=0 send_seq=6145 receive_seq=6145 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001480 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3676 bytes_read=13229 bytes_retransmit=0 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999789 adj=49999282  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.9 sysload=1.02 cputime=60.485 memavail=695532 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000
Stats 880.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112825 bytes_read=205777 bytes_retransmit=0 bytes_invalid=0 send_seq=6146 receive_seq=6146 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001483 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3682 bytes_read=13258 bytes_retransmit=0 bytes_invalid=0 send_seq=588 receive_seq=588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999314  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=60.562 memavail=695440 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 881.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112831 bytes_read=205971 bytes_retransmit=0 bytes_invalid=0 send_seq=6147 receive_seq=6147 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001488 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3688 bytes_read=13274 bytes_retransmit=0 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999791 adj=49999344  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.7 chamber: temp=19.8 sysload=1.02 cputime=60.630 memavail=695488 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.4 pwm=0.000
Stats 882.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112886 bytes_read=206165 bytes_retransmit=0 bytes_invalid=0 send_seq=6150 receive_seq=6150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001486 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3700 bytes_read=13306 bytes_retransmit=0 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999791 adj=49999343  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.02 cputime=60.705 memavail=695544 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
Stats 883.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112892 bytes_read=206402 bytes_retransmit=0 bytes_invalid=0 send_seq=6151 receive_seq=6151 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001485 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3706 bytes_read=13322 bytes_retransmit=0 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999787 adj=49999368  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.9 sysload=1.02 cputime=60.767 memavail=692424 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.0 pwm=0.000
Stats 884.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=112898 bytes_read=206625 bytes_retransmit=0 bytes_invalid=0 send_seq=6152 receive_seq=6152 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001483 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3712 bytes_read=13338 bytes_retransmit=0 bytes_invalid=0 send_seq=593 receive_seq=593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999789 adj=49999311  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.6 sysload=1.02 cputime=60.825 memavail=695124 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 885.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=112904 bytes_read=206818 bytes_retransmit=0 bytes_invalid=0 send_seq=6153 receive_seq=6153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001484 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3718 bytes_read=13367 bytes_retransmit=0 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999362  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=60.895 memavail=695296 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.5 pwm=0.000
Stats 886.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=112964 bytes_read=207065 bytes_retransmit=0 bytes_invalid=0 send_seq=6156 receive_seq=6156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001484 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3724 bytes_read=13383 bytes_retransmit=0 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999791 adj=49999378  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=60.967 memavail=695556 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 887.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=112970 bytes_read=207273 bytes_retransmit=0 bytes_invalid=0 send_seq=6157 receive_seq=6157 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001482 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3730 bytes_read=13399 bytes_retransmit=0 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999400  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=61.040 memavail=695556 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 888.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000007 bytes_write=112976 bytes_read=207466 bytes_retransmit=0 bytes_invalid=0 send_seq=6158 receive_seq=6158 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001482 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3736 bytes_read=13415 bytes_retransmit=0 bytes_invalid=0 send_seq=597 receive_seq=597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999377  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.02 cputime=61.114 memavail=695556 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 889.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112982 bytes_read=207718 bytes_retransmit=0 bytes_invalid=0 send_seq=6159 receive_seq=6159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001482 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=3742 bytes_read=13431 bytes_retransmit=0 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999789 adj=49999352  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.02 cputime=61.186 memavail=695452 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 890.8: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=112988 bytes_read=207926 bytes_retransmit=0 bytes_invalid=0 send_seq=6160 receive_seq=6160 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001480 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3748 bytes_read=13460 bytes_retransmit=0 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999373  heater_bed: target=0 temp=20.2 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.02 cputime=61.262 memavail=695556 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 891.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113048 bytes_read=208129 bytes_retransmit=0 bytes_invalid=0 send_seq=6163 receive_seq=6163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3754 bytes_read=13476 bytes_retransmit=0 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999787 adj=49999367  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=61.333 memavail=695056 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.2 pwm=0.000
Stats 892.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113054 bytes_read=208366 bytes_retransmit=0 bytes_invalid=0 send_seq=6164 receive_seq=6164 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3760 bytes_read=13492 bytes_retransmit=0 bytes_invalid=0 send_seq=601 receive_seq=601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999786 adj=49999351  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=61.403 memavail=694708 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000
Stats 893.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113060 bytes_read=208574 bytes_retransmit=0 bytes_invalid=0 send_seq=6165 receive_seq=6165 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001485 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3766 bytes_read=13508 bytes_retransmit=0 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999787 adj=49999330  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.5 chamber: temp=19.8 sysload=1.02 cputime=61.475 memavail=694708 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 894.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113066 bytes_read=208797 bytes_retransmit=0 bytes_invalid=0 send_seq=6166 receive_seq=6166 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001490 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=3772 bytes_read=13524 bytes_retransmit=0 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999787 adj=49999353  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.02 cputime=61.548 memavail=694812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 895.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113072 bytes_read=209034 bytes_retransmit=0 bytes_invalid=0 send_seq=6167 receive_seq=6167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001496 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3778 bytes_read=13553 bytes_retransmit=0 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999330  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.02 cputime=61.620 memavail=694740 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 896.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113130 bytes_read=209237 bytes_retransmit=0 bytes_invalid=0 send_seq=6170 receive_seq=6170 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3784 bytes_read=13569 bytes_retransmit=0 bytes_invalid=0 send_seq=605 receive_seq=605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999331  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=1.02 cputime=61.697 memavail=694812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000
Stats 897.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113136 bytes_read=209445 bytes_retransmit=0 bytes_invalid=0 send_seq=6171 receive_seq=6171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001493 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3790 bytes_read=13585 bytes_retransmit=0 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999789 adj=49999385  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.2 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.01 cputime=61.769 memavail=694812 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 898.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113142 bytes_read=209682 bytes_retransmit=0 bytes_invalid=0 send_seq=6172 receive_seq=6172 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3796 bytes_read=13601 bytes_retransmit=0 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999374  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.01 cputime=61.841 memavail=694392 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 899.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113148 bytes_read=209890 bytes_retransmit=0 bytes_invalid=0 send_seq=6173 receive_seq=6173 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001496 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=3802 bytes_read=13617 bytes_retransmit=0 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999389  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.2 chamber: temp=19.8 sysload=1.01 cputime=61.914 memavail=694572 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.5 pwm=0.000
Stats 900.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113154 bytes_read=210098 bytes_retransmit=0 bytes_invalid=0 send_seq=6174 receive_seq=6174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3808 bytes_read=13646 bytes_retransmit=0 bytes_invalid=0 send_seq=609 receive_seq=609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999789 adj=49999368  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.2 chamber: temp=19.9 sysload=1.01 cputime=61.986 memavail=694572 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 901.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113214 bytes_read=210345 bytes_retransmit=0 bytes_invalid=0 send_seq=6177 receive_seq=6177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001496 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3814 bytes_read=13662 bytes_retransmit=0 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999360  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.9 sysload=1.01 cputime=62.060 memavail=695024 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 902.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113220 bytes_read=210538 bytes_retransmit=0 bytes_invalid=0 send_seq=6178 receive_seq=6178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3820 bytes_read=13678 bytes_retransmit=0 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999339  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.2 chamber: temp=19.9 sysload=0.93 cputime=62.132 memavail=695080 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 903.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113226 bytes_read=210746 bytes_retransmit=0 bytes_invalid=0 send_seq=6179 receive_seq=6179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3826 bytes_read=13694 bytes_retransmit=0 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999387  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.2 chamber: temp=19.8 sysload=0.93 cputime=62.206 memavail=695080 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 904.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113232 bytes_read=210998 bytes_retransmit=0 bytes_invalid=0 send_seq=6180 receive_seq=6180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=3832 bytes_read=13710 bytes_retransmit=0 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999790 adj=49999361  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=20.0 sysload=0.93 cputime=62.280 memavail=695236 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000
Stats 905.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113292 bytes_read=211189 bytes_retransmit=0 bytes_invalid=0 send_seq=6183 receive_seq=6183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=3838 bytes_read=13739 bytes_retransmit=0 bytes_invalid=0 send_seq=614 receive_seq=614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999789 adj=49999399  heater_bed: target=0 temp=20.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.4 chamber: temp=19.8 sysload=0.93 cputime=62.355 memavail=695340 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 906.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000008 bytes_write=113298 bytes_read=211417 bytes_retransmit=0 bytes_invalid=0 send_seq=6184 receive_seq=6184 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=3844 bytes_read=13755 bytes_retransmit=0 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999788 adj=49999378  heater_bed: target=0 temp=20.1 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=33.3 chamber: temp=19.8 sysload=0.86 cputime=62.429 memavail=695340 print_time=778.018 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Heater heater_bed approaching new target of 60.000
Stats 2210.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=124804 bytes_read=491978 bytes_retransmit=0 bytes_invalid=0 send_seq=7625 receive_seq=7625 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001893 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11782 bytes_read=38188 bytes_retransmit=0 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999547 adj=49998987  heater_bed: target=60 temp=20.4 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=0.61 cputime=154.645 memavail=700116 print_time=2211.106 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2211.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=125352 bytes_read=492241 bytes_retransmit=0 bytes_invalid=0 send_seq=7637 receive_seq=7637 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001891 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11788 bytes_read=38204 bytes_retransmit=0 bytes_invalid=0 send_seq=1939 receive_seq=1939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999551 adj=49998983  heater_bed: target=60 temp=20.3 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.2 sysload=0.61 cputime=154.740 memavail=700100 print_time=2211.106 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2212.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=125396 bytes_read=492488 bytes_retransmit=0 bytes_invalid=0 send_seq=7640 receive_seq=7640 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001901 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11794 bytes_read=38220 bytes_retransmit=0 bytes_invalid=0 send_seq=1940 receive_seq=1940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999552 adj=49999075  heater_bed: target=60 temp=20.6 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.2 sysload=0.61 cputime=154.821 memavail=700116 print_time=2211.106 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Z not homed, forcing full G28
Homing X
Homing Y
Homing Z
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
SET_KINEMATIC_POSITION pos=0.000,0.000,0.000
Stats 2213.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=127740 bytes_read=493160 bytes_retransmit=0 bytes_invalid=0 send_seq=7696 receive_seq=7696 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001897 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11800 bytes_read=38236 bytes_retransmit=0 bytes_invalid=0 send_seq=1941 receive_seq=1941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999551 adj=49999026  heater_bed: target=60 temp=21.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=0.61 cputime=155.161 memavail=699840 print_time=2216.599 buffer_time=2.152 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2214.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000005 mcu_task_stddev=0.000004 bytes_write=128671 bytes_read=494050 bytes_retransmit=0 bytes_invalid=0 send_seq=7739 receive_seq=7739 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001895 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11806 bytes_read=38265 bytes_retransmit=0 bytes_invalid=0 send_seq=1942 receive_seq=1942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999547 adj=49999028  heater_bed: target=60 temp=21.9 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.2 chamber: temp=20.6 sysload=0.61 cputime=155.291 memavail=699616 print_time=2216.619 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2215.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=128848 bytes_read=494456 bytes_retransmit=0 bytes_invalid=0 send_seq=7749 receive_seq=7749 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001894 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11812 bytes_read=38281 bytes_retransmit=0 bytes_invalid=0 send_seq=1943 receive_seq=1943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999546 adj=49998989  heater_bed: target=60 temp=22.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=0.56 cputime=155.388 memavail=699616 print_time=2216.619 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2216.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=130215 bytes_read=495689 bytes_retransmit=0 bytes_invalid=0 send_seq=7824 receive_seq=7824 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001892 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11818 bytes_read=38297 bytes_retransmit=0 bytes_invalid=0 send_seq=1944 receive_seq=1944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49998982  heater_bed: target=60 temp=22.6 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.1 sysload=0.56 cputime=155.593 memavail=699608 print_time=2217.619 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2217.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=131312 bytes_read=496538 bytes_retransmit=0 bytes_invalid=0 send_seq=7877 receive_seq=7877 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001885 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11824 bytes_read=38313 bytes_retransmit=0 bytes_invalid=0 send_seq=1945 receive_seq=1945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49998954  heater_bed: target=60 temp=23.4 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.1 sysload=0.56 cputime=155.757 memavail=699616 print_time=2218.626 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2218.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=132768 bytes_read=497386 bytes_retransmit=0 bytes_invalid=0 send_seq=7931 receive_seq=7931 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001885 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11830 bytes_read=38329 bytes_retransmit=0 bytes_invalid=0 send_seq=1946 receive_seq=1946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49998978  heater_bed: target=60 temp=24.0 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.56 cputime=155.927 memavail=699616 print_time=2219.635 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2219.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000016 mcu_task_stddev=0.000036 bytes_write=133531 bytes_read=498096 bytes_retransmit=0 bytes_invalid=0 send_seq=7974 receive_seq=7974 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001907 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11836 bytes_read=38358 bytes_retransmit=0 bytes_invalid=0 send_seq=1947 receive_seq=1947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49998975  heater_bed: target=60 temp=24.6 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.56 cputime=156.073 memavail=699616 print_time=2220.635 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2220.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=134631 bytes_read=498993 bytes_retransmit=0 bytes_invalid=0 send_seq=8028 receive_seq=8028 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001900 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11842 bytes_read=38374 bytes_retransmit=0 bytes_invalid=0 send_seq=1948 receive_seq=1948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49998869  heater_bed: target=60 temp=25.4 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.52 cputime=156.245 memavail=699556 print_time=2221.766 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2221.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=135666 bytes_read=499755 bytes_retransmit=0 bytes_invalid=0 send_seq=8069 receive_seq=8069 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001904 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11848 bytes_read=38390 bytes_retransmit=0 bytes_invalid=0 send_seq=1949 receive_seq=1949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49998934  heater_bed: target=60 temp=26.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.2 chamber: temp=20.1 sysload=0.52 cputime=156.418 memavail=699620 print_time=2222.683 buffer_time=0.229 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2222.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=137196 bytes_read=500341 bytes_retransmit=0 bytes_invalid=0 send_seq=8107 receive_seq=8107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001897 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11854 bytes_read=38406 bytes_retransmit=0 bytes_invalid=0 send_seq=1950 receive_seq=1950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49998975  heater_bed: target=60 temp=26.9 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.1 sysload=0.52 cputime=156.641 memavail=699620 print_time=2223.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2223.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=138147 bytes_read=501079 bytes_retransmit=0 bytes_invalid=0 send_seq=8150 receive_seq=8150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001889 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000013 bytes_write=11860 bytes_read=38422 bytes_retransmit=0 bytes_invalid=0 send_seq=1951 receive_seq=1951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49999011  heater_bed: target=60 temp=27.7 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.1 chamber: temp=20.3 sysload=0.52 cputime=156.792 memavail=699836 print_time=2224.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2224.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=139010 bytes_read=501841 bytes_retransmit=0 bytes_invalid=0 send_seq=8192 receive_seq=8192 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001887 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11866 bytes_read=38451 bytes_retransmit=0 bytes_invalid=0 send_seq=1952 receive_seq=1952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999021  heater_bed: target=60 temp=28.4 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=0.52 cputime=156.952 memavail=699876 print_time=2225.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2225.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=139862 bytes_read=502569 bytes_retransmit=0 bytes_invalid=0 send_seq=8233 receive_seq=8233 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001881 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11872 bytes_read=38467 bytes_retransmit=0 bytes_invalid=0 send_seq=1953 receive_seq=1953 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49999019  heater_bed: target=60 temp=29.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.47 cputime=157.102 memavail=699876 print_time=2226.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2226.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=140676 bytes_read=503311 bytes_retransmit=0 bytes_invalid=0 send_seq=8274 receive_seq=8274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001874 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11878 bytes_read=38483 bytes_retransmit=0 bytes_invalid=0 send_seq=1954 receive_seq=1954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999538 adj=49999017  heater_bed: target=60 temp=29.8 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=0.47 cputime=157.253 memavail=699632 print_time=2227.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2227.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=141567 bytes_read=504064 bytes_retransmit=0 bytes_invalid=0 send_seq=8317 receive_seq=8317 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001871 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11884 bytes_read=38499 bytes_retransmit=0 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49999039  heater_bed: target=60 temp=30.6 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.2 chamber: temp=20.4 sysload=0.47 cputime=157.406 memavail=699632 print_time=2228.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2228.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=142435 bytes_read=504787 bytes_retransmit=0 bytes_invalid=0 send_seq=8360 receive_seq=8360 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001872 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=11890 bytes_read=38515 bytes_retransmit=0 bytes_invalid=0 send_seq=1956 receive_seq=1956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999014  heater_bed: target=60 temp=31.2 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.2 chamber: temp=20.3 sysload=0.47 cputime=157.568 memavail=699632 print_time=2229.645 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2229.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=144252 bytes_read=505705 bytes_retransmit=0 bytes_invalid=0 send_seq=8421 receive_seq=8421 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001871 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11902 bytes_read=38560 bytes_retransmit=0 bytes_invalid=0 send_seq=1958 receive_seq=1958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49998991  heater_bed: target=60 temp=32.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.47 cputime=157.744 memavail=699636 print_time=2230.946 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2230.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=145191 bytes_read=506382 bytes_retransmit=0 bytes_invalid=0 send_seq=8457 receive_seq=8457 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001867 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11908 bytes_read=38576 bytes_retransmit=0 bytes_invalid=0 send_seq=1959 receive_seq=1959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49999018  heater_bed: target=60 temp=32.6 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.44 cputime=157.870 memavail=699636 print_time=2231.646 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2231.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=147462 bytes_read=507277 bytes_retransmit=0 bytes_invalid=0 send_seq=8522 receive_seq=8522 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11914 bytes_read=38592 bytes_retransmit=0 bytes_invalid=0 send_seq=1960 receive_seq=1960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999034  heater_bed: target=60 temp=33.2 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=0.44 cputime=158.118 memavail=699636 print_time=2234.345 buffer_time=1.880 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2232.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=147646 bytes_read=507739 bytes_retransmit=0 bytes_invalid=0 send_seq=8535 receive_seq=8535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001864 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11920 bytes_read=38608 bytes_retransmit=0 bytes_invalid=0 send_seq=1961 receive_seq=1961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999534 adj=49999007  heater_bed: target=60 temp=34.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.2 chamber: temp=20.1 sysload=0.44 cputime=158.214 memavail=699644 print_time=2234.345 buffer_time=0.880 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2233.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=147884 bytes_read=508212 bytes_retransmit=0 bytes_invalid=0 send_seq=8550 receive_seq=8550 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001871 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11926 bytes_read=38624 bytes_retransmit=0 bytes_invalid=0 send_seq=1962 receive_seq=1962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49999012  heater_bed: target=60 temp=34.6 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.1 chamber: temp=20.2 sysload=0.44 cputime=158.344 memavail=699644 print_time=2234.699 buffer_time=0.233 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Z Tilt Adjust
probe: TRIGGERED
Attaching Probe
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2234.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=148609 bytes_read=508744 bytes_retransmit=0 bytes_invalid=0 send_seq=8577 receive_seq=8574 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001873 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11932 bytes_read=38653 bytes_retransmit=0 bytes_invalid=0 send_seq=1963 receive_seq=1963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999010  heater_bed: target=60 temp=35.2 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.2 chamber: temp=20.2 sysload=0.44 cputime=158.670 memavail=699636 print_time=2235.943 buffer_time=0.464 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2235.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=149461 bytes_read=509311 bytes_retransmit=0 bytes_invalid=0 send_seq=8602 receive_seq=8602 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001873 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11938 bytes_read=38669 bytes_retransmit=0 bytes_invalid=0 send_seq=1964 receive_seq=1964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999534 adj=49998962  heater_bed: target=60 temp=36.0 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.2 chamber: temp=20.3 sysload=0.72 cputime=158.836 memavail=699640 print_time=2237.281 buffer_time=0.801 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2236.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=149694 bytes_read=509769 bytes_retransmit=0 bytes_invalid=0 send_seq=8617 receive_seq=8617 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001873 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11944 bytes_read=38685 bytes_retransmit=0 bytes_invalid=0 send_seq=1965 receive_seq=1965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999537 adj=49998993  heater_bed: target=60 temp=36.7 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.1 chamber: temp=20.2 sysload=0.72 cputime=159.058 memavail=699640 print_time=2237.671 buffer_time=0.190 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2237.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=152281 bytes_read=510442 bytes_retransmit=0 bytes_invalid=0 send_seq=8672 receive_seq=8672 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001866 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11950 bytes_read=38701 bytes_retransmit=0 bytes_invalid=0 send_seq=1966 receive_seq=1966 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999538 adj=49999038  heater_bed: target=60 temp=37.2 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=0.72 cputime=159.385 memavail=699388 print_time=2240.422 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2238.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=152579 bytes_read=510934 bytes_retransmit=0 bytes_invalid=0 send_seq=8688 receive_seq=8688 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001868 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=11956 bytes_read=38717 bytes_retransmit=0 bytes_invalid=0 send_seq=1967 receive_seq=1967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999067  heater_bed: target=60 temp=38.0 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.72 cputime=159.508 memavail=699400 print_time=2240.422 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2239.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=153313 bytes_read=511456 bytes_retransmit=0 bytes_invalid=0 send_seq=8713 receive_seq=8713 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001867 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11962 bytes_read=38746 bytes_retransmit=0 bytes_invalid=0 send_seq=1968 receive_seq=1968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999545 adj=49999108  heater_bed: target=60 temp=38.5 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.72 cputime=159.642 memavail=699392 print_time=2240.672 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 30.000,5.000 is z=6.584750
Stats 2240.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=155234 bytes_read=512346 bytes_retransmit=0 bytes_invalid=0 send_seq=8774 receive_seq=8774 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11968 bytes_read=38762 bytes_retransmit=0 bytes_invalid=0 send_seq=1969 receive_seq=1969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999545 adj=49999154  heater_bed: target=60 temp=39.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.74 cputime=159.814 memavail=699392 print_time=2241.665 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 30.000,5.000 is z=6.582875
Stats 2241.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=157123 bytes_read=513223 bytes_retransmit=0 bytes_invalid=0 send_seq=8830 receive_seq=8830 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11974 bytes_read=38778 bytes_retransmit=0 bytes_invalid=0 send_seq=1970 receive_seq=1970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999168  heater_bed: target=60 temp=39.7 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.2 chamber: temp=20.3 sysload=0.74 cputime=159.948 memavail=699144 print_time=2242.661 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 30.000,5.000 is z=6.582250
Stats 2242.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=159468 bytes_read=514028 bytes_retransmit=0 bytes_invalid=0 send_seq=8888 receive_seq=8888 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11980 bytes_read=38794 bytes_retransmit=0 bytes_invalid=0 send_seq=1971 receive_seq=1971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999104  heater_bed: target=60 temp=40.3 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.0 sysload=0.74 cputime=160.153 memavail=699144 print_time=2243.994 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 125.000,195.000 is z=6.583500
Stats 2243.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=161379 bytes_read=514892 bytes_retransmit=0 bytes_invalid=0 send_seq=8948 receive_seq=8948 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=11986 bytes_read=38810 bytes_retransmit=0 bytes_invalid=0 send_seq=1972 receive_seq=1972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999094  heater_bed: target=60 temp=40.8 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.2 sysload=0.74 cputime=160.334 memavail=699144 print_time=2245.053 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 125.000,195.000 is z=6.581000
Stats 2244.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=163183 bytes_read=515738 bytes_retransmit=0 bytes_invalid=0 send_seq=9000 receive_seq=9000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001858 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11992 bytes_read=38839 bytes_retransmit=0 bytes_invalid=0 send_seq=1973 receive_seq=1973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999071  heater_bed: target=60 temp=41.4 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=0.74 cputime=160.464 memavail=698900 print_time=2245.838 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
probe at 125.000,195.000 is z=6.579750
Stats 2245.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=166091 bytes_read=516661 bytes_retransmit=0 bytes_invalid=0 send_seq=9070 receive_seq=9070 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001854 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=11998 bytes_read=38855 bytes_retransmit=0 bytes_invalid=0 send_seq=1974 receive_seq=1974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999041  heater_bed: target=60 temp=41.9 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.84 cputime=160.640 memavail=698900 print_time=2247.511 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2246.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=166716 bytes_read=517153 bytes_retransmit=0 bytes_invalid=0 send_seq=9092 receive_seq=9092 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12004 bytes_read=38871 bytes_retransmit=0 bytes_invalid=0 send_seq=1975 receive_seq=1975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999020  heater_bed: target=60 temp=42.4 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.0 chamber: temp=20.2 sysload=0.84 cputime=160.758 memavail=698904 print_time=2247.711 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe at 220.000,5.000 is z=6.594750
Stats 2247.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=168479 bytes_read=518043 bytes_retransmit=0 bytes_invalid=0 send_seq=9150 receive_seq=9150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12010 bytes_read=38887 bytes_retransmit=0 bytes_invalid=0 send_seq=1976 receive_seq=1976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49999064  heater_bed: target=60 temp=43.0 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.1 sysload=0.84 cputime=160.936 memavail=699164 print_time=2248.670 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe at 220.000,5.000 is z=6.594750
Stats 2248.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=170596 bytes_read=518933 bytes_retransmit=0 bytes_invalid=0 send_seq=9211 receive_seq=9211 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=12016 bytes_read=38903 bytes_retransmit=0 bytes_invalid=0 send_seq=1977 receive_seq=1977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49999103  heater_bed: target=60 temp=43.5 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.1 sysload=0.84 cputime=161.106 memavail=699164 print_time=2249.702 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
probe at 220.000,5.000 is z=6.594750
Calculating bed tilt with: [[29.99999999951686, 4.999999999581846, 6.5828749999947025], [124.99999999983675, 194.99999999987585, 6.580999999990139], [219.99999999976637, 4.999999999600618, 6.594749999985574]]
Coordinate descent initial error: 0.0829868281151
Coordinate descent best_err: 5.19729253431e-11  rounds: 182
Calculated bed tilt parameters: {'y_adjust': -4.114628311817774e-05, 'x_adjust': 6.250083005485815e-05, 'z_adjust': 6.581204061697763}
Making the following Z adjustments:
stepper_z = 0.158319
stepper_z1 = 0.156951
stepper_z2 = 0.179694
Retries: 0/5 Probed points range: 0.013750 tolerance: 0.007500
Stats 2249.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=173064 bytes_read=519747 bytes_retransmit=0 bytes_invalid=0 send_seq=9271 receive_seq=9271 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001853 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12022 bytes_read=38932 bytes_retransmit=0 bytes_invalid=0 send_seq=1978 receive_seq=1978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999079  heater_bed: target=60 temp=43.9 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.1 chamber: temp=20.1 sysload=0.84 cputime=161.304 memavail=699164 print_time=2251.147 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2250.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=173981 bytes_read=520396 bytes_retransmit=0 bytes_invalid=0 send_seq=9304 receive_seq=9304 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001853 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12028 bytes_read=38948 bytes_retransmit=0 bytes_invalid=0 send_seq=1979 receive_seq=1979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999028  heater_bed: target=60 temp=44.6 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=0.86 cputime=161.424 memavail=699168 print_time=2251.697 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 30.000,5.000 is z=6.422424
probe at 30.000,5.000 is z=6.423049
Stats 2251.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=176743 bytes_read=521494 bytes_retransmit=0 bytes_invalid=0 send_seq=9383 receive_seq=9383 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12034 bytes_read=38964 bytes_retransmit=0 bytes_invalid=0 send_seq=1980 receive_seq=1980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49998980  heater_bed: target=60 temp=45.0 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.4 chamber: temp=20.1 sysload=0.86 cputime=161.607 memavail=699168 print_time=2252.974 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe at 30.000,5.000 is z=6.423674
Stats 2252.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=179662 bytes_read=522391 bytes_retransmit=0 bytes_invalid=0 send_seq=9454 receive_seq=9454 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12040 bytes_read=38980 bytes_retransmit=0 bytes_invalid=0 send_seq=1981 receive_seq=1981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49999015  heater_bed: target=60 temp=45.5 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.2 chamber: temp=20.3 sysload=0.86 cputime=161.810 memavail=699168 print_time=2254.671 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2253.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=179928 bytes_read=522878 bytes_retransmit=0 bytes_invalid=0 send_seq=9469 receive_seq=9469 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001853 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12046 bytes_read=38996 bytes_retransmit=0 bytes_invalid=0 send_seq=1982 receive_seq=1982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999014  heater_bed: target=60 temp=46.1 pwm=0.680 raspberry_pi: temp=44.0 mcu_temp: temp=30.3 chamber: temp=20.1 sysload=0.86 cputime=161.896 memavail=699176 print_time=2254.721 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe at 125.000,195.000 is z=6.421174
Stats 2254.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=181827 bytes_read=523763 bytes_retransmit=0 bytes_invalid=0 send_seq=9529 receive_seq=9529 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12052 bytes_read=39025 bytes_retransmit=0 bytes_invalid=0 send_seq=1983 receive_seq=1983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49999036  heater_bed: target=60 temp=46.5 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.2 sysload=0.86 cputime=162.070 memavail=699180 print_time=2255.734 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe at 125.000,195.000 is z=6.420549
Stats 2255.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=184035 bytes_read=524645 bytes_retransmit=0 bytes_invalid=0 send_seq=9591 receive_seq=9591 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12058 bytes_read=39041 bytes_retransmit=0 bytes_invalid=0 send_seq=1984 receive_seq=1984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49999003  heater_bed: target=60 temp=46.8 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.2 sysload=0.87 cputime=162.234 memavail=699180 print_time=2256.714 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 125.000,195.000 is z=6.419299
Stats 2256.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=186529 bytes_read=525537 bytes_retransmit=0 bytes_invalid=0 send_seq=9655 receive_seq=9655 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001856 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12064 bytes_read=39057 bytes_retransmit=0 bytes_invalid=0 send_seq=1985 receive_seq=1985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49998990  heater_bed: target=60 temp=47.4 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.1 chamber: temp=20.1 sysload=0.87 cputime=162.405 memavail=699068 print_time=2258.241 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2257.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=187380 bytes_read=526107 bytes_retransmit=0 bytes_invalid=0 send_seq=9684 receive_seq=9684 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12070 bytes_read=39073 bytes_retransmit=0 bytes_invalid=0 send_seq=1986 receive_seq=1986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49998990  heater_bed: target=60 temp=47.8 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.87 cputime=162.532 memavail=699192 print_time=2258.691 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe at 220.000,5.000 is z=6.422424
Stats 2258.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=189312 bytes_read=527006 bytes_retransmit=0 bytes_invalid=0 send_seq=9745 receive_seq=9745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001858 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12076 bytes_read=39089 bytes_retransmit=0 bytes_invalid=0 send_seq=1987 receive_seq=1987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999006  heater_bed: target=60 temp=48.1 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.3 sysload=0.87 cputime=162.691 memavail=699192 print_time=2259.677 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe at 220.000,5.000 is z=6.422424
probe at 220.000,5.000 is z=6.422424
Calculating bed tilt with: [[29.999999999516845, 4.99999999958186, 6.4230494820690565], [124.99999999983675, 194.99999999987585, 6.420549482064347], [219.99999999976637, 4.999999999600618, 6.422424482059635]]
Coordinate descent initial error: 1.5479384686e-05
Coordinate descent best_err: 1.4357471888e-10  rounds: 169
Calculated bed tilt parameters: {'y_adjust': -1.1457074811291643e-05, 'x_adjust': -3.3165931208575384e-06, 'z_adjust': 6.423201023407838}
Making the following Z adjustments:
stepper_z = 0.003351
stepper_z1 = -0.000573
stepper_z2 = 0.002216
Retries: 1/5 Probed points range: 0.002500 tolerance: 0.007500
Docking Probe
Stats 2259.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=192555 bytes_read=528136 bytes_retransmit=0 bytes_invalid=0 send_seq=9830 receive_seq=9830 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12082 bytes_read=39118 bytes_retransmit=0 bytes_invalid=0 send_seq=1988 receive_seq=1988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49999045  heater_bed: target=60 temp=48.6 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.87 cputime=162.941 memavail=699400 print_time=2261.238 buffer_time=0.729 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2260.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=194937 bytes_read=528784 bytes_retransmit=0 bytes_invalid=0 send_seq=9880 receive_seq=9880 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001848 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12088 bytes_read=39134 bytes_retransmit=0 bytes_invalid=0 send_seq=1989 receive_seq=1989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999083  heater_bed: target=60 temp=49.0 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=0.96 cputime=163.126 memavail=699448 print_time=2263.672 buffer_time=2.162 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2261.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=195123 bytes_read=529225 bytes_retransmit=0 bytes_invalid=0 send_seq=9893 receive_seq=9893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12094 bytes_read=39150 bytes_retransmit=0 bytes_invalid=0 send_seq=1990 receive_seq=1990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999047  heater_bed: target=60 temp=49.3 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.2 sysload=0.96 cputime=163.208 memavail=699464 print_time=2263.672 buffer_time=1.162 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 2262.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=195419 bytes_read=529712 bytes_retransmit=0 bytes_invalid=0 send_seq=9908 receive_seq=9908 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12100 bytes_read=39166 bytes_retransmit=0 bytes_invalid=0 send_seq=1991 receive_seq=1991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999016  heater_bed: target=60 temp=49.8 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.6 sysload=0.96 cputime=163.337 memavail=699448 print_time=2263.672 buffer_time=0.161 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Stats 2263.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=196247 bytes_read=530220 bytes_retransmit=0 bytes_invalid=0 send_seq=9933 receive_seq=9933 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12106 bytes_read=39182 bytes_retransmit=0 bytes_invalid=0 send_seq=1992 receive_seq=1992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999023  heater_bed: target=60 temp=50.1 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.2 sysload=0.96 cputime=163.487 memavail=699472 print_time=2265.154 buffer_time=0.643 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2264.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=196780 bytes_read=530683 bytes_retransmit=0 bytes_invalid=0 send_seq=9952 receive_seq=9952 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001864 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=12112 bytes_read=39211 bytes_retransmit=0 bytes_invalid=0 send_seq=1993 receive_seq=1993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999032  heater_bed: target=60 temp=50.5 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=0.96 cputime=163.629 memavail=699476 print_time=2265.873 buffer_time=0.361 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2265.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=197029 bytes_read=531178 bytes_retransmit=0 bytes_invalid=0 send_seq=9967 receive_seq=9967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=12118 bytes_read=39227 bytes_retransmit=0 bytes_invalid=0 send_seq=1994 receive_seq=1994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49998998  heater_bed: target=60 temp=50.9 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=1.04 cputime=163.841 memavail=699476 print_time=2267.250 buffer_time=0.735 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
probe: TRIGGERED
Stats 2266.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=197240 bytes_read=531636 bytes_retransmit=0 bytes_invalid=0 send_seq=9982 receive_seq=9982 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001859 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=12124 bytes_read=39243 bytes_retransmit=0 bytes_invalid=0 send_seq=1995 receive_seq=1995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999547 adj=49998943  heater_bed: target=60 temp=51.3 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=1.04 cputime=164.067 memavail=699476 print_time=2267.538 buffer_time=0.023 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Homing Z
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2267.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=197466 bytes_read=532119 bytes_retransmit=0 bytes_invalid=0 send_seq=9999 receive_seq=9999 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001858 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=12130 bytes_read=39259 bytes_retransmit=0 bytes_invalid=0 send_seq=1996 receive_seq=1996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999547 adj=49999026  heater_bed: target=60 temp=51.6 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.2 chamber: temp=20.3 sysload=1.04 cputime=164.322 memavail=699468 print_time=2268.544 buffer_time=0.025 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2268.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=199250 bytes_read=532817 bytes_retransmit=0 bytes_invalid=0 send_seq=10045 receive_seq=10045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001854 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=12136 bytes_read=39275 bytes_retransmit=0 bytes_invalid=0 send_seq=1997 receive_seq=1997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999546 adj=49999042  heater_bed: target=60 temp=51.9 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.5 chamber: temp=20.0 sysload=1.04 cputime=164.561 memavail=699480 print_time=2269.720 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2269.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=200085 bytes_read=533555 bytes_retransmit=0 bytes_invalid=0 send_seq=10088 receive_seq=10088 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12142 bytes_read=39304 bytes_retransmit=0 bytes_invalid=0 send_seq=1998 receive_seq=1998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999553 adj=49999035  heater_bed: target=60 temp=52.4 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.4 chamber: temp=20.3 sysload=1.04 cputime=164.721 memavail=699480 print_time=2270.720 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2270.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=200909 bytes_read=534293 bytes_retransmit=0 bytes_invalid=0 send_seq=10131 receive_seq=10131 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001848 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12148 bytes_read=39320 bytes_retransmit=0 bytes_invalid=0 send_seq=1999 receive_seq=1999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999554 adj=49999167  heater_bed: target=60 temp=52.7 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.3 chamber: temp=20.4 sysload=1.36 cputime=164.883 memavail=699480 print_time=2271.720 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2271.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=202614 bytes_read=535163 bytes_retransmit=0 bytes_invalid=0 send_seq=10185 receive_seq=10185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001847 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12154 bytes_read=39336 bytes_retransmit=0 bytes_invalid=0 send_seq=2000 receive_seq=2000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999552 adj=49999161  heater_bed: target=60 temp=53.0 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.4 chamber: temp=20.1 sysload=1.36 cputime=165.023 memavail=699480 print_time=2272.762 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2272.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=203684 bytes_read=535868 bytes_retransmit=0 bytes_invalid=0 send_seq=10227 receive_seq=10227 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12160 bytes_read=39352 bytes_retransmit=0 bytes_invalid=0 send_seq=2001 receive_seq=2001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999555 adj=49999093  heater_bed: target=60 temp=53.4 pwm=0.630 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.4 sysload=1.36 cputime=165.166 memavail=699480 print_time=2273.712 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2273.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=205793 bytes_read=536705 bytes_retransmit=0 bytes_invalid=0 send_seq=10286 receive_seq=10286 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=12166 bytes_read=39368 bytes_retransmit=0 bytes_invalid=0 send_seq=2002 receive_seq=2002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999554 adj=49999149  heater_bed: target=60 temp=53.7 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.3 chamber: temp=20.3 sysload=1.36 cputime=165.378 memavail=699208 print_time=2276.152 buffer_time=1.625 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2274.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=206026 bytes_read=537202 bytes_retransmit=0 bytes_invalid=0 send_seq=10300 receive_seq=10300 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001839 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=12172 bytes_read=39397 bytes_retransmit=0 bytes_invalid=0 send_seq=2003 receive_seq=2003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999552 adj=49999069  heater_bed: target=60 temp=53.9 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.1 sysload=1.36 cputime=165.473 memavail=699388 print_time=2276.152 buffer_time=0.624 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 2275.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=206427 bytes_read=537728 bytes_retransmit=0 bytes_invalid=0 send_seq=10319 receive_seq=10317 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=13 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=12178 bytes_read=39413 bytes_retransmit=0 bytes_invalid=0 send_seq=2004 receive_seq=2004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999551 adj=49999057  heater_bed: target=60 temp=54.3 pwm=0.628 raspberry_pi: temp=42.9 mcu_temp: temp=30.4 chamber: temp=20.2 sysload=1.41 cputime=165.824 memavail=699492 print_time=2276.935 buffer_time=0.244 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2276.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=208302 bytes_read=538334 bytes_retransmit=0 bytes_invalid=0 send_seq=10360 receive_seq=10360 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=12184 bytes_read=39429 bytes_retransmit=0 bytes_invalid=0 send_seq=2005 receive_seq=2005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999548 adj=49999017  heater_bed: target=60 temp=54.6 pwm=0.628 raspberry_pi: temp=42.9 mcu_temp: temp=30.5 chamber: temp=20.4 sysload=1.41 cputime=165.936 memavail=699492 print_time=2278.509 buffer_time=0.817 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2277.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=208551 bytes_read=538777 bytes_retransmit=0 bytes_invalid=0 send_seq=10375 receive_seq=10375 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=12190 bytes_read=39445 bytes_retransmit=0 bytes_invalid=0 send_seq=2006 receive_seq=2006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999546 adj=49998989  heater_bed: target=60 temp=54.8 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.41 cputime=166.029 memavail=699244 print_time=2278.509 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2278.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=210717 bytes_read=539414 bytes_retransmit=0 bytes_invalid=0 send_seq=10420 receive_seq=10420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001844 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=12196 bytes_read=39461 bytes_retransmit=0 bytes_invalid=0 send_seq=2007 receive_seq=2007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49998937  heater_bed: target=60 temp=55.1 pwm=0.623 raspberry_pi: temp=42.9 mcu_temp: temp=30.4 chamber: temp=20.1 sysload=1.41 cputime=166.196 memavail=699244 print_time=2281.746 buffer_time=2.052 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2279.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=211415 bytes_read=539902 bytes_retransmit=0 bytes_invalid=0 send_seq=10441 receive_seq=10441 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12202 bytes_read=39490 bytes_retransmit=0 bytes_invalid=0 send_seq=2008 receive_seq=2008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999000  heater_bed: target=60 temp=55.3 pwm=0.680 raspberry_pi: temp=43.5 mcu_temp: temp=30.6 chamber: temp=20.0 sysload=1.41 cputime=166.274 memavail=699244 print_time=2281.746 buffer_time=1.050 print_stall=0 extruder: target=0 temp=23.0 pwm=0.000
Heater heater_bed within range of 60.000
Stats 2280.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=211615 bytes_read=540355 bytes_retransmit=0 bytes_invalid=0 send_seq=10455 receive_seq=10455 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12208 bytes_read=39506 bytes_retransmit=0 bytes_invalid=0 send_seq=2009 receive_seq=2009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999545 adj=49998984  heater_bed: target=60 temp=55.5 pwm=0.605 raspberry_pi: temp=42.9 mcu_temp: temp=30.4 chamber: temp=20.1 sysload=1.54 cputime=166.394 memavail=699084 print_time=2281.746 buffer_time=0.049 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2281.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=211859 bytes_read=540842 bytes_retransmit=0 bytes_invalid=0 send_seq=10470 receive_seq=10470 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12214 bytes_read=39522 bytes_retransmit=0 bytes_invalid=0 send_seq=2010 receive_seq=2010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999545 adj=49999008  heater_bed: target=60 temp=55.9 pwm=0.550 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.54 cputime=166.506 memavail=699252 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2282.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=212537 bytes_read=541335 bytes_retransmit=0 bytes_invalid=0 send_seq=10492 receive_seq=10492 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001844 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12220 bytes_read=39538 bytes_retransmit=0 bytes_invalid=0 send_seq=2011 receive_seq=2011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999547 adj=49999009  heater_bed: target=60 temp=56.1 pwm=0.550 raspberry_pi: temp=43.5 mcu_temp: temp=30.5 chamber: temp=20.1 sysload=1.54 cputime=166.607 memavail=699252 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2283.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=212721 bytes_read=541768 bytes_retransmit=0 bytes_invalid=0 send_seq=10505 receive_seq=10505 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=12226 bytes_read=39554 bytes_retransmit=0 bytes_invalid=0 send_seq=2012 receive_seq=2012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999550 adj=49999046  heater_bed: target=60 temp=56.4 pwm=0.550 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.54 cputime=166.705 memavail=699248 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2284.5: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000013 mcu_task_stddev=0.000029 bytes_write=212921 bytes_read=542250 bytes_retransmit=0 bytes_invalid=0 send_seq=10519 receive_seq=10519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001842 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12232 bytes_read=39582 bytes_retransmit=0 bytes_invalid=0 send_seq=2013 receive_seq=2013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999554 adj=49999103  heater_bed: target=60 temp=56.7 pwm=0.491 raspberry_pi: temp=42.9 mcu_temp: temp=30.4 chamber: temp=20.2 sysload=1.54 cputime=166.806 memavail=699256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2285.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=213175 bytes_read=542728 bytes_retransmit=0 bytes_invalid=0 send_seq=10535 receive_seq=10535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001844 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12238 bytes_read=39597 bytes_retransmit=0 bytes_invalid=0 send_seq=2014 receive_seq=2014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999555 adj=49999144  heater_bed: target=60 temp=56.8 pwm=0.587 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.1 sysload=1.50 cputime=166.914 memavail=699256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2286.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=213359 bytes_read=543161 bytes_retransmit=0 bytes_invalid=0 send_seq=10548 receive_seq=10548 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001847 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12244 bytes_read=39612 bytes_retransmit=0 bytes_invalid=0 send_seq=2015 receive_seq=2015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999559 adj=49999134  heater_bed: target=60 temp=57.0 pwm=0.587 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.1 sysload=1.50 cputime=167.027 memavail=699268 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2287.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=213543 bytes_read=543638 bytes_retransmit=0 bytes_invalid=0 send_seq=10561 receive_seq=10561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001848 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12256 bytes_read=39642 bytes_retransmit=0 bytes_invalid=0 send_seq=2017 receive_seq=2017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999560 adj=49999163  heater_bed: target=60 temp=57.2 pwm=0.587 raspberry_pi: temp=42.9 mcu_temp: temp=30.5 chamber: temp=20.3 sysload=1.50 cputime=167.136 memavail=699268 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2288.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=213727 bytes_read=544086 bytes_retransmit=0 bytes_invalid=0 send_seq=10574 receive_seq=10574 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001850 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12262 bytes_read=39657 bytes_retransmit=0 bytes_invalid=0 send_seq=2018 receive_seq=2018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999561 adj=49999143  heater_bed: target=60 temp=57.3 pwm=0.587 raspberry_pi: temp=43.5 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.50 cputime=167.246 memavail=699268 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2289.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=213927 bytes_read=544516 bytes_retransmit=0 bytes_invalid=0 send_seq=10588 receive_seq=10588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12268 bytes_read=39686 bytes_retransmit=0 bytes_invalid=0 send_seq=2019 receive_seq=2019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999562 adj=49999117  heater_bed: target=60 temp=57.5 pwm=0.594 raspberry_pi: temp=42.9 mcu_temp: temp=30.7 chamber: temp=20.2 sysload=1.50 cputime=167.356 memavail=699252 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2290.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=214111 bytes_read=544995 bytes_retransmit=0 bytes_invalid=0 send_seq=10601 receive_seq=10601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001856 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12274 bytes_read=39702 bytes_retransmit=0 bytes_invalid=0 send_seq=2020 receive_seq=2020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999562 adj=49999097  heater_bed: target=60 temp=57.7 pwm=0.594 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.46 cputime=167.470 memavail=699268 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2291.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=214344 bytes_read=545448 bytes_retransmit=0 bytes_invalid=0 send_seq=10615 receive_seq=10615 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12280 bytes_read=39718 bytes_retransmit=0 bytes_invalid=0 send_seq=2021 receive_seq=2021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999564 adj=49999087  heater_bed: target=60 temp=57.8 pwm=0.594 raspberry_pi: temp=42.4 mcu_temp: temp=30.4 chamber: temp=20.2 sysload=1.46 cputime=167.590 memavail=699280 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2292.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=214571 bytes_read=545891 bytes_retransmit=0 bytes_invalid=0 send_seq=10630 receive_seq=10630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12286 bytes_read=39734 bytes_retransmit=0 bytes_invalid=0 send_seq=2022 receive_seq=2022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999565 adj=49999086  heater_bed: target=60 temp=58.0 pwm=0.581 raspberry_pi: temp=42.9 mcu_temp: temp=30.5 chamber: temp=20.3 sysload=1.46 cputime=167.708 memavail=699012 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2293.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=214755 bytes_read=546368 bytes_retransmit=0 bytes_invalid=0 send_seq=10643 receive_seq=10643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001865 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12292 bytes_read=39750 bytes_retransmit=0 bytes_invalid=0 send_seq=2023 receive_seq=2023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999079  heater_bed: target=60 temp=58.1 pwm=0.581 raspberry_pi: temp=42.9 mcu_temp: temp=30.7 chamber: temp=20.2 sysload=1.46 cputime=167.819 memavail=699004 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2294.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=215059 bytes_read=546826 bytes_retransmit=0 bytes_invalid=0 send_seq=10658 receive_seq=10658 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001862 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=12298 bytes_read=39779 bytes_retransmit=0 bytes_invalid=0 send_seq=2024 receive_seq=2024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999142  heater_bed: target=60 temp=58.2 pwm=0.581 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.46 cputime=167.936 memavail=699028 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2295.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=215243 bytes_read=547274 bytes_retransmit=0 bytes_invalid=0 send_seq=10671 receive_seq=10671 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=12304 bytes_read=39795 bytes_retransmit=0 bytes_invalid=0 send_seq=2025 receive_seq=2025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999574 adj=49999167  heater_bed: target=60 temp=58.3 pwm=0.581 raspberry_pi: temp=42.9 mcu_temp: temp=30.7 chamber: temp=20.3 sysload=1.50 cputime=168.054 memavail=699036 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2296.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=215443 bytes_read=547756 bytes_retransmit=0 bytes_invalid=0 send_seq=10685 receive_seq=10685 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001861 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=12310 bytes_read=39811 bytes_retransmit=0 bytes_invalid=0 send_seq=2026 receive_seq=2026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999171  heater_bed: target=60 temp=58.5 pwm=0.568 raspberry_pi: temp=42.9 mcu_temp: temp=30.6 chamber: temp=20.2 sysload=1.50 cputime=168.163 memavail=699036 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2297.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=215627 bytes_read=548204 bytes_retransmit=0 bytes_invalid=0 send_seq=10698 receive_seq=10698 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001857 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=12316 bytes_read=39827 bytes_retransmit=0 bytes_invalid=0 send_seq=2027 receive_seq=2027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999214  heater_bed: target=60 temp=58.6 pwm=0.568 raspberry_pi: temp=42.9 mcu_temp: temp=30.8 chamber: temp=20.2 sysload=1.50 cputime=168.280 memavail=699036 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2298.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=215854 bytes_read=548642 bytes_retransmit=0 bytes_invalid=0 send_seq=10712 receive_seq=10712 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001855 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=12322 bytes_read=39843 bytes_retransmit=0 bytes_invalid=0 send_seq=2028 receive_seq=2028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999234  heater_bed: target=60 temp=58.7 pwm=0.568 raspberry_pi: temp=42.4 mcu_temp: temp=30.7 chamber: temp=20.2 sysload=1.50 cputime=168.395 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2299.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=216038 bytes_read=549119 bytes_retransmit=0 bytes_invalid=0 send_seq=10725 receive_seq=10725 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001854 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=12328 bytes_read=39872 bytes_retransmit=0 bytes_invalid=0 send_seq=2029 receive_seq=2029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999188  heater_bed: target=60 temp=58.8 pwm=0.568 raspberry_pi: temp=42.4 mcu_temp: temp=30.8 chamber: temp=20.3 sysload=1.50 cputime=168.505 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2300.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=216222 bytes_read=549582 bytes_retransmit=0 bytes_invalid=0 send_seq=10738 receive_seq=10738 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001852 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=12334 bytes_read=39888 bytes_retransmit=0 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999172  heater_bed: target=60 temp=58.9 pwm=0.568 raspberry_pi: temp=42.9 mcu_temp: temp=30.9 chamber: temp=20.2 sysload=1.38 cputime=168.610 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2301.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=216417 bytes_read=550015 bytes_retransmit=0 bytes_invalid=0 send_seq=10751 receive_seq=10751 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001849 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=12340 bytes_read=39904 bytes_retransmit=0 bytes_invalid=0 send_seq=2031 receive_seq=2031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999177  heater_bed: target=60 temp=58.9 pwm=0.575 raspberry_pi: temp=42.9 mcu_temp: temp=30.8 chamber: temp=20.3 sysload=1.38 cputime=168.717 memavail=698952 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2302.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=216601 bytes_read=550492 bytes_retransmit=0 bytes_invalid=0 send_seq=10764 receive_seq=10764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=12346 bytes_read=39920 bytes_retransmit=0 bytes_invalid=0 send_seq=2032 receive_seq=2032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999172  heater_bed: target=60 temp=59.0 pwm=0.575 raspberry_pi: temp=42.9 mcu_temp: temp=30.7 chamber: temp=20.3 sysload=1.38 cputime=168.830 memavail=699052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2303.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=216785 bytes_read=550940 bytes_retransmit=0 bytes_invalid=0 send_seq=10777 receive_seq=10777 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001836 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=12352 bytes_read=39936 bytes_retransmit=0 bytes_invalid=0 send_seq=2033 receive_seq=2033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999585 adj=49999191  heater_bed: target=60 temp=59.1 pwm=0.575 raspberry_pi: temp=42.9 mcu_temp: temp=30.8 chamber: temp=20.3 sysload=1.38 cputime=168.942 memavail=698776 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2304.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=216969 bytes_read=551373 bytes_retransmit=0 bytes_invalid=0 send_seq=10790 receive_seq=10790 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001835 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12358 bytes_read=39965 bytes_retransmit=0 bytes_invalid=0 send_seq=2034 receive_seq=2034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999192  heater_bed: target=60 temp=59.1 pwm=0.575 raspberry_pi: temp=42.4 mcu_temp: temp=30.8 chamber: temp=20.3 sysload=1.38 cputime=169.055 memavail=698800 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2305.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=217169 bytes_read=551870 bytes_retransmit=0 bytes_invalid=0 send_seq=10804 receive_seq=10804 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001840 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12364 bytes_read=39981 bytes_retransmit=0 bytes_invalid=0 send_seq=2035 receive_seq=2035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999155  heater_bed: target=60 temp=59.2 pwm=0.568 raspberry_pi: temp=42.4 mcu_temp: temp=30.9 chamber: temp=20.4 sysload=1.27 cputime=169.167 memavail=698800 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2306.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=217369 bytes_read=552323 bytes_retransmit=0 bytes_invalid=0 send_seq=10818 receive_seq=10818 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001838 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12370 bytes_read=39997 bytes_retransmit=0 bytes_invalid=0 send_seq=2036 receive_seq=2036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999114  heater_bed: target=60 temp=59.3 pwm=0.513 raspberry_pi: temp=42.4 mcu_temp: temp=31.0 chamber: temp=20.3 sysload=1.27 cputime=169.274 memavail=698800 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2307.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=217553 bytes_read=552756 bytes_retransmit=0 bytes_invalid=0 send_seq=10831 receive_seq=10831 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001844 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12376 bytes_read=40013 bytes_retransmit=0 bytes_invalid=0 send_seq=2037 receive_seq=2037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999106  heater_bed: target=60 temp=59.4 pwm=0.513 raspberry_pi: temp=41.9 mcu_temp: temp=30.8 chamber: temp=20.2 sysload=1.27 cputime=169.382 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2308.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=217737 bytes_read=553233 bytes_retransmit=0 bytes_invalid=0 send_seq=10844 receive_seq=10844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001840 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12382 bytes_read=40029 bytes_retransmit=0 bytes_invalid=0 send_seq=2038 receive_seq=2038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999063  heater_bed: target=60 temp=59.5 pwm=0.513 raspberry_pi: temp=42.4 mcu_temp: temp=31.0 chamber: temp=20.2 sysload=1.27 cputime=169.486 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2309.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=217921 bytes_read=553681 bytes_retransmit=0 bytes_invalid=0 send_seq=10857 receive_seq=10857 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001842 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12388 bytes_read=40058 bytes_retransmit=0 bytes_invalid=0 send_seq=2039 receive_seq=2039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999063  heater_bed: target=60 temp=59.6 pwm=0.513 raspberry_pi: temp=41.9 mcu_temp: temp=30.9 chamber: temp=20.3 sysload=1.27 cputime=169.594 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2310.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=218220 bytes_read=554149 bytes_retransmit=0 bytes_invalid=0 send_seq=10875 receive_seq=10874 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001847 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12394 bytes_read=40074 bytes_retransmit=0 bytes_invalid=0 send_seq=2040 receive_seq=2040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999048  heater_bed: target=60 temp=59.6 pwm=0.499 raspberry_pi: temp=41.9 mcu_temp: temp=30.9 chamber: temp=20.2 sysload=1.17 cputime=169.707 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2311.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=218404 bytes_read=554642 bytes_retransmit=0 bytes_invalid=0 send_seq=10888 receive_seq=10888 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001845 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12400 bytes_read=40090 bytes_retransmit=0 bytes_invalid=0 send_seq=2041 receive_seq=2041 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999043  heater_bed: target=60 temp=59.7 pwm=0.499 raspberry_pi: temp=42.9 mcu_temp: temp=31.1 chamber: temp=20.3 sysload=1.17 cputime=169.813 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2312.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=218588 bytes_read=555090 bytes_retransmit=0 bytes_invalid=0 send_seq=10901 receive_seq=10901 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12406 bytes_read=40106 bytes_retransmit=0 bytes_invalid=0 send_seq=2042 receive_seq=2042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999098  heater_bed: target=60 temp=59.7 pwm=0.499 raspberry_pi: temp=42.9 mcu_temp: temp=30.9 chamber: temp=20.1 sysload=1.17 cputime=169.917 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2313.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=218772 bytes_read=555511 bytes_retransmit=0 bytes_invalid=0 send_seq=10914 receive_seq=10914 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001842 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12412 bytes_read=40122 bytes_retransmit=0 bytes_invalid=0 send_seq=2043 receive_seq=2043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999082  heater_bed: target=60 temp=59.7 pwm=0.499 raspberry_pi: temp=42.4 mcu_temp: temp=30.9 chamber: temp=20.3 sysload=1.17 cputime=170.026 memavail=699816 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2314.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=218967 bytes_read=555979 bytes_retransmit=0 bytes_invalid=0 send_seq=10927 receive_seq=10927 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12418 bytes_read=40151 bytes_retransmit=0 bytes_invalid=0 send_seq=2044 receive_seq=2044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999073  heater_bed: target=60 temp=59.8 pwm=0.546 raspberry_pi: temp=42.4 mcu_temp: temp=31.0 chamber: temp=20.3 sysload=1.17 cputime=170.129 memavail=699840 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2315.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=219151 bytes_read=556442 bytes_retransmit=0 bytes_invalid=0 send_seq=10940 receive_seq=10940 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001841 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12424 bytes_read=40167 bytes_retransmit=0 bytes_invalid=0 send_seq=2045 receive_seq=2045 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999066  heater_bed: target=60 temp=59.8 pwm=0.546 raspberry_pi: temp=42.4 mcu_temp: temp=31.1 chamber: temp=20.3 sysload=1.07 cputime=170.236 memavail=699840 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2316.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=219335 bytes_read=556875 bytes_retransmit=0 bytes_invalid=0 send_seq=10953 receive_seq=10953 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001840 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12430 bytes_read=40183 bytes_retransmit=0 bytes_invalid=0 send_seq=2046 receive_seq=2046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999056  heater_bed: target=60 temp=59.9 pwm=0.546 raspberry_pi: temp=41.3 mcu_temp: temp=30.9 chamber: temp=20.2 sysload=1.07 cputime=170.339 memavail=699836 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2317.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=219519 bytes_read=557352 bytes_retransmit=0 bytes_invalid=0 send_seq=10966 receive_seq=10966 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001839 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12436 bytes_read=40199 bytes_retransmit=0 bytes_invalid=0 send_seq=2047 receive_seq=2047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999075  heater_bed: target=60 temp=59.9 pwm=0.546 raspberry_pi: temp=41.9 mcu_temp: temp=31.2 chamber: temp=20.1 sysload=1.07 cputime=170.441 memavail=699836 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2318.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=219703 bytes_read=557800 bytes_retransmit=0 bytes_invalid=0 send_seq=10979 receive_seq=10979 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001843 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12442 bytes_read=40215 bytes_retransmit=0 bytes_invalid=0 send_seq=2048 receive_seq=2048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999070  heater_bed: target=60 temp=59.9 pwm=0.546 raspberry_pi: temp=41.9 mcu_temp: temp=30.9 chamber: temp=20.3 sysload=1.07 cputime=170.549 memavail=699836 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.1 pwm=0.000
Stats 2319.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=219898 bytes_read=558248 bytes_retransmit=0 bytes_invalid=0 send_seq=10992 receive_seq=10992 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001844 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12448 bytes_read=40244 bytes_retransmit=0 bytes_invalid=0 send_seq=2049 receive_seq=2049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999036  heater_bed: target=60 temp=60.0 pwm=0.493 raspberry_pi: temp=42.4 mcu_temp: temp=31.1 chamber: temp=20.3 sysload=1.07 cputime=170.658 memavail=699844 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2320.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=220093 bytes_read=558740 bytes_retransmit=0 bytes_invalid=0 send_seq=11005 receive_seq=11005 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001842 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12454 bytes_read=40260 bytes_retransmit=0 bytes_invalid=0 send_seq=2050 receive_seq=2050 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999041  heater_bed: target=60 temp=60.0 pwm=0.493 raspberry_pi: temp=42.4 mcu_temp: temp=31.1 chamber: temp=20.3 sysload=0.99 cputime=170.761 memavail=699844 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2321.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=220277 bytes_read=559173 bytes_retransmit=0 bytes_invalid=0 send_seq=11018 receive_seq=11018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001839 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12460 bytes_read=40276 bytes_retransmit=0 bytes_invalid=0 send_seq=2051 receive_seq=2051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999041  heater_bed: target=60 temp=60.0 pwm=0.493 raspberry_pi: temp=42.4 mcu_temp: temp=31.2 chamber: temp=20.2 sysload=0.99 cputime=170.862 memavail=699848 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2322.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=220461 bytes_read=559621 bytes_retransmit=0 bytes_invalid=0 send_seq=11031 receive_seq=11031 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001835 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12466 bytes_read=40292 bytes_retransmit=0 bytes_invalid=0 send_seq=2052 receive_seq=2052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999063  heater_bed: target=60 temp=60.0 pwm=0.493 raspberry_pi: temp=42.4 mcu_temp: temp=31.1 chamber: temp=20.3 sysload=0.99 cputime=170.964 memavail=699848 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2323.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=220645 bytes_read=560098 bytes_retransmit=0 bytes_invalid=0 send_seq=11044 receive_seq=11044 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001834 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12472 bytes_read=40308 bytes_retransmit=0 bytes_invalid=0 send_seq=2053 receive_seq=2053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999069  heater_bed: target=60 temp=60.0 pwm=0.493 raspberry_pi: temp=42.4 mcu_temp: temp=31.2 chamber: temp=20.3 sysload=0.99 cputime=171.067 memavail=700028 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2324.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=220861 bytes_read=560541 bytes_retransmit=0 bytes_invalid=0 send_seq=11059 receive_seq=11059 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001833 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12478 bytes_read=40337 bytes_retransmit=0 bytes_invalid=0 send_seq=2054 receive_seq=2054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999119  heater_bed: target=60 temp=60.1 pwm=0.458 raspberry_pi: temp=42.4 mcu_temp: temp=31.1 chamber: temp=20.2 sysload=0.99 cputime=171.169 memavail=700092 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2325.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=221045 bytes_read=561004 bytes_retransmit=0 bytes_invalid=0 send_seq=11072 receive_seq=11072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001829 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12484 bytes_read=40353 bytes_retransmit=0 bytes_invalid=0 send_seq=2055 receive_seq=2055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999106  heater_bed: target=60 temp=60.1 pwm=0.458 raspberry_pi: temp=42.4 mcu_temp: temp=31.3 chamber: temp=20.2 sysload=0.99 cputime=171.275 memavail=699848 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2326.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=221245 bytes_read=561486 bytes_retransmit=0 bytes_invalid=0 send_seq=11086 receive_seq=11086 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001828 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12490 bytes_read=40369 bytes_retransmit=0 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999138  heater_bed: target=60 temp=60.1 pwm=0.510 raspberry_pi: temp=42.4 mcu_temp: temp=31.3 chamber: temp=20.3 sysload=0.99 cputime=171.385 memavail=699848 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2327.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=221429 bytes_read=561919 bytes_retransmit=0 bytes_invalid=0 send_seq=11099 receive_seq=11099 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001826 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12496 bytes_read=40385 bytes_retransmit=0 bytes_invalid=0 send_seq=2057 receive_seq=2057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999103  heater_bed: target=60 temp=60.1 pwm=0.510 raspberry_pi: temp=41.9 mcu_temp: temp=31.3 chamber: temp=20.1 sysload=0.99 cputime=171.487 memavail=699848 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2328.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=221613 bytes_read=562367 bytes_retransmit=0 bytes_invalid=0 send_seq=11112 receive_seq=11112 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001822 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12502 bytes_read=40401 bytes_retransmit=0 bytes_invalid=0 send_seq=2058 receive_seq=2058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999091  heater_bed: target=60 temp=60.2 pwm=0.510 raspberry_pi: temp=41.9 mcu_temp: temp=31.3 chamber: temp=20.1 sysload=0.99 cputime=171.587 memavail=697968 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2329.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=221813 bytes_read=562849 bytes_retransmit=0 bytes_invalid=0 send_seq=11126 receive_seq=11126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001831 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12508 bytes_read=40430 bytes_retransmit=0 bytes_invalid=0 send_seq=2059 receive_seq=2059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999577 adj=49999114  heater_bed: target=60 temp=60.2 pwm=0.445 raspberry_pi: temp=41.9 mcu_temp: temp=31.3 chamber: temp=20.2 sysload=0.99 cputime=171.669 memavail=698096 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2330.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=221997 bytes_read=563297 bytes_retransmit=0 bytes_invalid=0 send_seq=11139 receive_seq=11139 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001830 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12514 bytes_read=40446 bytes_retransmit=0 bytes_invalid=0 send_seq=2060 receive_seq=2060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999015  heater_bed: target=60 temp=60.3 pwm=0.445 raspberry_pi: temp=42.4 mcu_temp: temp=31.3 chamber: temp=20.2 sysload=0.91 cputime=171.776 memavail=698096 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2331.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=222181 bytes_read=563745 bytes_retransmit=0 bytes_invalid=0 send_seq=11152 receive_seq=11152 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001830 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12520 bytes_read=40462 bytes_retransmit=0 bytes_invalid=0 send_seq=2061 receive_seq=2061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999007  heater_bed: target=60 temp=60.3 pwm=0.445 raspberry_pi: temp=42.4 mcu_temp: temp=31.4 chamber: temp=20.2 sysload=0.91 cputime=171.877 memavail=697668 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2332.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=222365 bytes_read=564222 bytes_retransmit=0 bytes_invalid=0 send_seq=11165 receive_seq=11165 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001833 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12526 bytes_read=40478 bytes_retransmit=0 bytes_invalid=0 send_seq=2062 receive_seq=2062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999016  heater_bed: target=60 temp=60.4 pwm=0.445 raspberry_pi: temp=41.9 mcu_temp: temp=31.4 chamber: temp=20.2 sysload=0.91 cputime=171.982 memavail=697848 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2333.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=222565 bytes_read=564660 bytes_retransmit=0 bytes_invalid=0 send_seq=11179 receive_seq=11179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001835 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=12532 bytes_read=40494 bytes_retransmit=0 bytes_invalid=0 send_seq=2063 receive_seq=2063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999015  heater_bed: target=60 temp=60.5 pwm=0.393 raspberry_pi: temp=41.9 mcu_temp: temp=31.3 chamber: temp=20.2 sysload=0.91 cputime=172.084 memavail=698552 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2334.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=222749 bytes_read=565108 bytes_retransmit=0 bytes_invalid=0 send_seq=11192 receive_seq=11192 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001829 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12538 bytes_read=40523 bytes_retransmit=0 bytes_invalid=0 send_seq=2064 receive_seq=2064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999577 adj=49999008  heater_bed: target=60 temp=60.5 pwm=0.393 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.2 sysload=0.91 cputime=172.190 memavail=698552 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2335.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=222933 bytes_read=565600 bytes_retransmit=0 bytes_invalid=0 send_seq=11205 receive_seq=11205 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001822 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12544 bytes_read=40539 bytes_retransmit=0 bytes_invalid=0 send_seq=2065 receive_seq=2065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999079  heater_bed: target=60 temp=60.5 pwm=0.393 raspberry_pi: temp=42.4 mcu_temp: temp=31.5 chamber: temp=20.3 sysload=0.84 cputime=172.302 memavail=698608 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2336.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=223182 bytes_read=566043 bytes_retransmit=0 bytes_invalid=0 send_seq=11220 receive_seq=11220 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001817 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12550 bytes_read=40555 bytes_retransmit=0 bytes_invalid=0 send_seq=2066 receive_seq=2066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999578 adj=49999136  heater_bed: target=60 temp=60.5 pwm=0.447 raspberry_pi: temp=42.4 mcu_temp: temp=31.3 chamber: temp=20.2 sysload=0.84 cputime=172.408 memavail=698608 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2337.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=223366 bytes_read=566477 bytes_retransmit=0 bytes_invalid=0 send_seq=11233 receive_seq=11233 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001810 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12556 bytes_read=40571 bytes_retransmit=0 bytes_invalid=0 send_seq=2067 receive_seq=2067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999578 adj=49999130  heater_bed: target=60 temp=60.5 pwm=0.447 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.3 sysload=0.84 cputime=172.514 memavail=698864 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2338.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=223550 bytes_read=566946 bytes_retransmit=0 bytes_invalid=0 send_seq=11246 receive_seq=11246 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001801 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12562 bytes_read=40587 bytes_retransmit=0 bytes_invalid=0 send_seq=2068 receive_seq=2068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999148  heater_bed: target=60 temp=60.5 pwm=0.447 raspberry_pi: temp=41.9 mcu_temp: temp=31.4 chamber: temp=20.1 sysload=0.84 cputime=172.621 memavail=698864 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2339.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=223756 bytes_read=567379 bytes_retransmit=0 bytes_invalid=0 send_seq=11259 receive_seq=11259 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001796 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12568 bytes_read=40616 bytes_retransmit=0 bytes_invalid=0 send_seq=2069 receive_seq=2069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999196  heater_bed: target=60 temp=60.5 pwm=0.463 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.2 sysload=0.84 cputime=172.731 memavail=698864 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2340.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=223989 bytes_read=567847 bytes_retransmit=0 bytes_invalid=0 send_seq=11273 receive_seq=11273 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001795 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12574 bytes_read=40632 bytes_retransmit=0 bytes_invalid=0 send_seq=2070 receive_seq=2070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999184  heater_bed: target=60 temp=60.4 pwm=0.463 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.1 sysload=0.93 cputime=172.835 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2341.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=224173 bytes_read=568324 bytes_retransmit=0 bytes_invalid=0 send_seq=11286 receive_seq=11286 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001792 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12580 bytes_read=40648 bytes_retransmit=0 bytes_invalid=0 send_seq=2071 receive_seq=2071 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999166  heater_bed: target=60 temp=60.4 pwm=0.463 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.3 sysload=0.93 cputime=172.942 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2342.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=224357 bytes_read=568757 bytes_retransmit=0 bytes_invalid=0 send_seq=11299 receive_seq=11299 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001792 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12586 bytes_read=40664 bytes_retransmit=0 bytes_invalid=0 send_seq=2072 receive_seq=2072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999156  heater_bed: target=60 temp=60.4 pwm=0.463 raspberry_pi: temp=41.9 mcu_temp: temp=31.6 chamber: temp=20.1 sysload=0.93 cputime=173.044 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2343.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=224573 bytes_read=569215 bytes_retransmit=0 bytes_invalid=0 send_seq=11314 receive_seq=11314 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001789 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12592 bytes_read=40680 bytes_retransmit=0 bytes_invalid=0 send_seq=2073 receive_seq=2073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999578 adj=49999137  heater_bed: target=60 temp=60.4 pwm=0.446 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.3 sysload=0.93 cputime=173.152 memavail=698524 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2344.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=224773 bytes_read=569697 bytes_retransmit=0 bytes_invalid=0 send_seq=11328 receive_seq=11328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001787 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12598 bytes_read=40709 bytes_retransmit=0 bytes_invalid=0 send_seq=2074 receive_seq=2074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999119  heater_bed: target=60 temp=60.5 pwm=0.379 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.2 sysload=0.93 cputime=173.256 memavail=698532 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2345.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=224968 bytes_read=570145 bytes_retransmit=0 bytes_invalid=0 send_seq=11341 receive_seq=11341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001790 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12604 bytes_read=40725 bytes_retransmit=0 bytes_invalid=0 send_seq=2075 receive_seq=2075 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999136  heater_bed: target=60 temp=60.5 pwm=0.435 raspberry_pi: temp=41.9 mcu_temp: temp=31.5 chamber: temp=20.3 sysload=0.85 cputime=173.367 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.2 pwm=0.000
Stats 2346.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=225184 bytes_read=570603 bytes_retransmit=0 bytes_invalid=0 send_seq=11356 receive_seq=11356 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001789 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12610 bytes_read=40741 bytes_retransmit=0 bytes_invalid=0 send_seq=2076 receive_seq=2076 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999108  heater_bed: target=60 temp=60.5 pwm=0.443 raspberry_pi: temp=41.9 mcu_temp: temp=31.7 chamber: temp=20.3 sysload=0.85 cputime=173.475 memavail=698632 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2347.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=225368 bytes_read=571080 bytes_retransmit=0 bytes_invalid=0 send_seq=11369 receive_seq=11369 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001786 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12616 bytes_read=40757 bytes_retransmit=0 bytes_invalid=0 send_seq=2077 receive_seq=2077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999170  heater_bed: target=60 temp=60.5 pwm=0.443 raspberry_pi: temp=41.9 mcu_temp: temp=31.7 chamber: temp=20.2 sysload=0.85 cputime=173.580 memavail=698632 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2348.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=225552 bytes_read=571513 bytes_retransmit=0 bytes_invalid=0 send_seq=11382 receive_seq=11382 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001787 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12622 bytes_read=40773 bytes_retransmit=0 bytes_invalid=0 send_seq=2078 receive_seq=2078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999164  heater_bed: target=60 temp=60.4 pwm=0.443 raspberry_pi: temp=41.3 mcu_temp: temp=31.6 chamber: temp=20.3 sysload=0.85 cputime=173.685 memavail=698632 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2349.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=225736 bytes_read=571961 bytes_retransmit=0 bytes_invalid=0 send_seq=11395 receive_seq=11395 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001784 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=12634 bytes_read=40818 bytes_retransmit=0 bytes_invalid=0 send_seq=2080 receive_seq=2080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999152  heater_bed: target=60 temp=60.5 pwm=0.388 raspberry_pi: temp=41.9 mcu_temp: temp=31.7 chamber: temp=20.3 sysload=0.85 cputime=173.788 memavail=698884 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2350.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=225952 bytes_read=572463 bytes_retransmit=0 bytes_invalid=0 send_seq=11410 receive_seq=11410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001777 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=12640 bytes_read=40834 bytes_retransmit=0 bytes_invalid=0 send_seq=2081 receive_seq=2081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999194  heater_bed: target=60 temp=60.4 pwm=0.446 raspberry_pi: temp=41.9 mcu_temp: temp=31.8 chamber: temp=20.2 sysload=0.87 cputime=173.889 memavail=698884 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2351.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=226136 bytes_read=572896 bytes_retransmit=0 bytes_invalid=0 send_seq=11423 receive_seq=11423 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001776 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=12646 bytes_read=40850 bytes_retransmit=0 bytes_invalid=0 send_seq=2082 receive_seq=2082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999204  heater_bed: target=60 temp=60.4 pwm=0.446 raspberry_pi: temp=41.3 mcu_temp: temp=31.6 chamber: temp=20.3 sysload=0.87 cputime=173.992 memavail=698884 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2352.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=226352 bytes_read=573354 bytes_retransmit=0 bytes_invalid=0 send_seq=11438 receive_seq=11438 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001773 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=12652 bytes_read=40866 bytes_retransmit=0 bytes_invalid=0 send_seq=2083 receive_seq=2083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999221  heater_bed: target=60 temp=60.3 pwm=0.445 raspberry_pi: temp=41.9 mcu_temp: temp=31.6 chamber: temp=20.3 sysload=0.87 cputime=174.108 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2353.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=226536 bytes_read=573831 bytes_retransmit=0 bytes_invalid=0 send_seq=11451 receive_seq=11451 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001767 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=12658 bytes_read=40882 bytes_retransmit=0 bytes_invalid=0 send_seq=2084 receive_seq=2084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999205  heater_bed: target=60 temp=60.3 pwm=0.445 raspberry_pi: temp=41.9 mcu_temp: temp=31.8 chamber: temp=20.2 sysload=0.87 cputime=174.212 memavail=699300 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2354.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=226720 bytes_read=574264 bytes_retransmit=0 bytes_invalid=0 send_seq=11464 receive_seq=11464 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001763 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=12664 bytes_read=40898 bytes_retransmit=0 bytes_invalid=0 send_seq=2085 receive_seq=2085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999256  heater_bed: target=60 temp=60.3 pwm=0.445 raspberry_pi: temp=40.8 mcu_temp: temp=31.8 chamber: temp=20.3 sysload=0.87 cputime=174.313 memavail=699392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2355.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=226936 bytes_read=574737 bytes_retransmit=0 bytes_invalid=0 send_seq=11479 receive_seq=11479 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001761 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12670 bytes_read=40927 bytes_retransmit=0 bytes_invalid=0 send_seq=2086 receive_seq=2086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999299  heater_bed: target=60 temp=60.2 pwm=0.430 raspberry_pi: temp=41.9 mcu_temp: temp=31.9 chamber: temp=20.2 sysload=0.88 cputime=174.422 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2356.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=227120 bytes_read=575214 bytes_retransmit=0 bytes_invalid=0 send_seq=11492 receive_seq=11492 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001759 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12676 bytes_read=40943 bytes_retransmit=0 bytes_invalid=0 send_seq=2087 receive_seq=2087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999259  heater_bed: target=60 temp=60.2 pwm=0.430 raspberry_pi: temp=41.9 mcu_temp: temp=31.7 chamber: temp=20.3 sysload=0.88 cputime=174.528 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2357.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=227304 bytes_read=575647 bytes_retransmit=0 bytes_invalid=0 send_seq=11505 receive_seq=11505 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001753 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12682 bytes_read=40959 bytes_retransmit=0 bytes_invalid=0 send_seq=2088 receive_seq=2088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999249  heater_bed: target=60 temp=60.2 pwm=0.430 raspberry_pi: temp=41.3 mcu_temp: temp=31.8 chamber: temp=20.2 sysload=0.88 cputime=174.637 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2358.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=227488 bytes_read=576109 bytes_retransmit=0 bytes_invalid=0 send_seq=11518 receive_seq=11518 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001752 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12688 bytes_read=40975 bytes_retransmit=0 bytes_invalid=0 send_seq=2089 receive_seq=2089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999212  heater_bed: target=60 temp=60.2 pwm=0.430 raspberry_pi: temp=41.3 mcu_temp: temp=31.8 chamber: temp=20.2 sysload=0.88 cputime=174.740 memavail=698900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2359.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=227683 bytes_read=576572 bytes_retransmit=0 bytes_invalid=0 send_seq=11531 receive_seq=11531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001744 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12694 bytes_read=40991 bytes_retransmit=0 bytes_invalid=0 send_seq=2090 receive_seq=2090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999166  heater_bed: target=60 temp=60.2 pwm=0.438 raspberry_pi: temp=41.3 mcu_temp: temp=31.9 chamber: temp=20.2 sysload=0.88 cputime=174.844 memavail=698900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2360.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=227867 bytes_read=577018 bytes_retransmit=0 bytes_invalid=0 send_seq=11544 receive_seq=11544 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001748 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12700 bytes_read=41020 bytes_retransmit=0 bytes_invalid=0 send_seq=2091 receive_seq=2091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999174  heater_bed: target=60 temp=60.2 pwm=0.438 raspberry_pi: temp=40.8 mcu_temp: temp=32.0 chamber: temp=20.3 sysload=0.89 cputime=174.951 memavail=698900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2361.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=228051 bytes_read=577465 bytes_retransmit=0 bytes_invalid=0 send_seq=11557 receive_seq=11557 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001748 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12706 bytes_read=41036 bytes_retransmit=0 bytes_invalid=0 send_seq=2092 receive_seq=2092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999142  heater_bed: target=60 temp=60.1 pwm=0.438 raspberry_pi: temp=41.3 mcu_temp: temp=31.9 chamber: temp=20.2 sysload=0.89 cputime=175.066 memavail=698512 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2362.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=228262 bytes_read=577928 bytes_retransmit=0 bytes_invalid=0 send_seq=11571 receive_seq=11571 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001746 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12712 bytes_read=41052 bytes_retransmit=0 bytes_invalid=0 send_seq=2093 receive_seq=2093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999143  heater_bed: target=60 temp=60.2 pwm=0.418 raspberry_pi: temp=41.3 mcu_temp: temp=32.0 chamber: temp=20.2 sysload=0.89 cputime=175.171 memavail=698660 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2363.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=228457 bytes_read=578361 bytes_retransmit=0 bytes_invalid=0 send_seq=11584 receive_seq=11584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001743 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12718 bytes_read=41068 bytes_retransmit=0 bytes_invalid=0 send_seq=2094 receive_seq=2094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999141  heater_bed: target=60 temp=60.1 pwm=0.483 raspberry_pi: temp=41.9 mcu_temp: temp=32.1 chamber: temp=20.2 sysload=0.89 cputime=175.271 memavail=698376 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2364.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=228657 bytes_read=578828 bytes_retransmit=0 bytes_invalid=0 send_seq=11598 receive_seq=11598 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001739 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12724 bytes_read=41084 bytes_retransmit=0 bytes_invalid=0 send_seq=2095 receive_seq=2095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999133  heater_bed: target=60 temp=60.2 pwm=0.415 raspberry_pi: temp=41.9 mcu_temp: temp=31.9 chamber: temp=20.2 sysload=0.89 cputime=175.377 memavail=698612 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2365.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=228868 bytes_read=579311 bytes_retransmit=0 bytes_invalid=0 send_seq=11612 receive_seq=11612 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001737 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12730 bytes_read=41113 bytes_retransmit=0 bytes_invalid=0 send_seq=2096 receive_seq=2096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999148  heater_bed: target=60 temp=60.2 pwm=0.379 raspberry_pi: temp=41.9 mcu_temp: temp=32.0 chamber: temp=20.2 sysload=0.90 cputime=175.488 memavail=698660 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2366.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=229068 bytes_read=579749 bytes_retransmit=0 bytes_invalid=0 send_seq=11626 receive_seq=11626 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001734 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12736 bytes_read=41129 bytes_retransmit=0 bytes_invalid=0 send_seq=2097 receive_seq=2097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999182  heater_bed: target=60 temp=60.2 pwm=0.431 raspberry_pi: temp=41.3 mcu_temp: temp=32.0 chamber: temp=20.2 sysload=0.90 cputime=175.597 memavail=698660 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2367.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=229263 bytes_read=580211 bytes_retransmit=0 bytes_invalid=0 send_seq=11639 receive_seq=11639 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001733 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12742 bytes_read=41145 bytes_retransmit=0 bytes_invalid=0 send_seq=2098 receive_seq=2098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999157  heater_bed: target=60 temp=60.2 pwm=0.373 raspberry_pi: temp=41.9 mcu_temp: temp=32.0 chamber: temp=20.3 sysload=0.90 cputime=175.702 memavail=698672 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2368.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=229447 bytes_read=580674 bytes_retransmit=0 bytes_invalid=0 send_seq=11652 receive_seq=11652 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12748 bytes_read=41161 bytes_retransmit=0 bytes_invalid=0 send_seq=2099 receive_seq=2099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999154  heater_bed: target=60 temp=60.2 pwm=0.373 raspberry_pi: temp=41.3 mcu_temp: temp=32.1 chamber: temp=20.2 sysload=0.90 cputime=175.804 memavail=698672 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2369.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=229631 bytes_read=581107 bytes_retransmit=0 bytes_invalid=0 send_seq=11665 receive_seq=11665 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001720 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12754 bytes_read=41177 bytes_retransmit=0 bytes_invalid=0 send_seq=2100 receive_seq=2100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999165  heater_bed: target=60 temp=60.3 pwm=0.373 raspberry_pi: temp=41.3 mcu_temp: temp=32.1 chamber: temp=20.2 sysload=0.90 cputime=175.911 memavail=698672 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.3 pwm=0.000
Stats 2370.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=229826 bytes_read=581599 bytes_retransmit=0 bytes_invalid=0 send_seq=11678 receive_seq=11678 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001725 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12760 bytes_read=41205 bytes_retransmit=0 bytes_invalid=0 send_seq=2101 receive_seq=2101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999242  heater_bed: target=60 temp=60.3 pwm=0.426 raspberry_pi: temp=41.3 mcu_temp: temp=32.2 chamber: temp=20.2 sysload=0.90 cputime=176.026 memavail=698672 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2371.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=230010 bytes_read=582047 bytes_retransmit=0 bytes_invalid=0 send_seq=11691 receive_seq=11691 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001724 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12766 bytes_read=41220 bytes_retransmit=0 bytes_invalid=0 send_seq=2102 receive_seq=2102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999180  heater_bed: target=60 temp=60.3 pwm=0.426 raspberry_pi: temp=41.3 mcu_temp: temp=32.2 chamber: temp=20.3 sysload=0.90 cputime=176.128 memavail=698672 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2372.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=230210 bytes_read=582485 bytes_retransmit=0 bytes_invalid=0 send_seq=11705 receive_seq=11705 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001722 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12772 bytes_read=41235 bytes_retransmit=0 bytes_invalid=0 send_seq=2103 receive_seq=2103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999137  heater_bed: target=60 temp=60.3 pwm=0.371 raspberry_pi: temp=40.8 mcu_temp: temp=32.2 chamber: temp=20.3 sysload=0.90 cputime=176.239 memavail=698672 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2373.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=230400 bytes_read=582962 bytes_retransmit=0 bytes_invalid=0 send_seq=11719 receive_seq=11718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001723 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12778 bytes_read=41250 bytes_retransmit=0 bytes_invalid=0 send_seq=2104 receive_seq=2104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999131  heater_bed: target=60 temp=60.3 pwm=0.371 raspberry_pi: temp=41.3 mcu_temp: temp=32.3 chamber: temp=20.3 sysload=0.90 cputime=176.354 memavail=698636 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2374.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=230584 bytes_read=583426 bytes_retransmit=0 bytes_invalid=0 send_seq=11732 receive_seq=11732 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001722 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12784 bytes_read=41265 bytes_retransmit=0 bytes_invalid=0 send_seq=2105 receive_seq=2105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999105  heater_bed: target=60 temp=60.4 pwm=0.371 raspberry_pi: temp=41.9 mcu_temp: temp=32.3 chamber: temp=20.2 sysload=0.90 cputime=176.468 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2375.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=230768 bytes_read=583874 bytes_retransmit=0 bytes_invalid=0 send_seq=11745 receive_seq=11745 retransmit_seq=0 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001729 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12790 bytes_read=41294 bytes_retransmit=0 bytes_invalid=0 send_seq=2106 receive_seq=2106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999076  heater_bed: target=60 temp=60.4 pwm=0.371 raspberry_pi: temp=40.8 mcu_temp: temp=32.3 chamber: temp=20.3 sysload=0.91 cputime=176.586 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2376.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=230968 bytes_read=584356 bytes_retransmit=0 bytes_invalid=0 send_seq=11759 receive_seq=11759 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001729 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12796 bytes_read=41310 bytes_retransmit=0 bytes_invalid=0 send_seq=2107 receive_seq=2107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999043  heater_bed: target=60 temp=60.4 pwm=0.388 raspberry_pi: temp=41.9 mcu_temp: temp=32.3 chamber: temp=20.3 sysload=0.91 cputime=176.691 memavail=698688 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2377.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=231152 bytes_read=584804 bytes_retransmit=0 bytes_invalid=0 send_seq=11772 receive_seq=11772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001727 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12802 bytes_read=41326 bytes_retransmit=0 bytes_invalid=0 send_seq=2108 receive_seq=2108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999055  heater_bed: target=60 temp=60.4 pwm=0.388 raspberry_pi: temp=41.9 mcu_temp: temp=32.4 chamber: temp=20.2 sysload=0.91 cputime=176.803 memavail=698688 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2378.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=231336 bytes_read=585237 bytes_retransmit=0 bytes_invalid=0 send_seq=11785 receive_seq=11785 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001727 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12808 bytes_read=41342 bytes_retransmit=0 bytes_invalid=0 send_seq=2109 receive_seq=2109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999100  heater_bed: target=60 temp=60.4 pwm=0.388 raspberry_pi: temp=41.3 mcu_temp: temp=32.2 chamber: temp=20.3 sysload=0.91 cputime=176.917 memavail=698688 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2379.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=231520 bytes_read=585714 bytes_retransmit=0 bytes_invalid=0 send_seq=11798 receive_seq=11798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001724 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=12814 bytes_read=41358 bytes_retransmit=0 bytes_invalid=0 send_seq=2110 receive_seq=2110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999109  heater_bed: target=60 temp=60.4 pwm=0.388 raspberry_pi: temp=41.3 mcu_temp: temp=32.3 chamber: temp=20.3 sysload=0.91 cputime=177.033 memavail=698552 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2380.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=231715 bytes_read=586177 bytes_retransmit=0 bytes_invalid=0 send_seq=11811 receive_seq=11811 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001728 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12820 bytes_read=41387 bytes_retransmit=0 bytes_invalid=0 send_seq=2111 receive_seq=2111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999157  heater_bed: target=60 temp=60.3 pwm=0.436 raspberry_pi: temp=41.3 mcu_temp: temp=32.3 chamber: temp=20.3 sysload=0.92 cputime=177.144 memavail=698696 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2381.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=231899 bytes_read=586610 bytes_retransmit=0 bytes_invalid=0 send_seq=11824 receive_seq=11824 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001725 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12826 bytes_read=41403 bytes_retransmit=0 bytes_invalid=0 send_seq=2112 receive_seq=2112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999142  heater_bed: target=60 temp=60.3 pwm=0.436 raspberry_pi: temp=41.3 mcu_temp: temp=32.2 chamber: temp=20.4 sysload=0.92 cputime=177.250 memavail=698696 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2382.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=232083 bytes_read=587087 bytes_retransmit=0 bytes_invalid=0 send_seq=11837 receive_seq=11837 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001724 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12832 bytes_read=41419 bytes_retransmit=0 bytes_invalid=0 send_seq=2113 receive_seq=2113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999151  heater_bed: target=60 temp=60.2 pwm=0.436 raspberry_pi: temp=41.3 mcu_temp: temp=32.3 chamber: temp=20.3 sysload=0.92 cputime=177.364 memavail=698708 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2383.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=232267 bytes_read=587535 bytes_retransmit=0 bytes_invalid=0 send_seq=11850 receive_seq=11850 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001722 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12838 bytes_read=41435 bytes_retransmit=0 bytes_invalid=0 send_seq=2114 receive_seq=2114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999115  heater_bed: target=60 temp=60.2 pwm=0.436 raspberry_pi: temp=41.3 mcu_temp: temp=32.3 chamber: temp=20.2 sysload=0.92 cputime=177.472 memavail=698616 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2384.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=232451 bytes_read=587964 bytes_retransmit=0 bytes_invalid=0 send_seq=11863 receive_seq=11863 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001719 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=12844 bytes_read=41451 bytes_retransmit=0 bytes_invalid=0 send_seq=2115 receive_seq=2115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999128  heater_bed: target=60 temp=60.2 pwm=0.436 raspberry_pi: temp=41.3 mcu_temp: temp=32.4 chamber: temp=20.3 sysload=0.92 cputime=177.582 memavail=698408 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2385.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=232646 bytes_read=588440 bytes_retransmit=0 bytes_invalid=0 send_seq=11876 receive_seq=11876 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001715 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12850 bytes_read=41480 bytes_retransmit=0 bytes_invalid=0 send_seq=2116 receive_seq=2116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999589 adj=49999105  heater_bed: target=60 temp=60.2 pwm=0.422 raspberry_pi: temp=40.8 mcu_temp: temp=32.4 chamber: temp=20.3 sysload=0.93 cputime=177.693 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2386.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=232830 bytes_read=588887 bytes_retransmit=0 bytes_invalid=0 send_seq=11889 receive_seq=11889 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001714 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12856 bytes_read=41496 bytes_retransmit=0 bytes_invalid=0 send_seq=2117 receive_seq=2117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999084  heater_bed: target=60 temp=60.2 pwm=0.422 raspberry_pi: temp=41.3 mcu_temp: temp=32.5 chamber: temp=20.4 sysload=0.93 cputime=177.806 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2387.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=233030 bytes_read=589325 bytes_retransmit=0 bytes_invalid=0 send_seq=11903 receive_seq=11903 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001714 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12862 bytes_read=41512 bytes_retransmit=0 bytes_invalid=0 send_seq=2118 receive_seq=2118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999082  heater_bed: target=60 temp=60.2 pwm=0.368 raspberry_pi: temp=41.3 mcu_temp: temp=32.4 chamber: temp=20.3 sysload=0.93 cputime=177.917 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2388.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=233214 bytes_read=589802 bytes_retransmit=0 bytes_invalid=0 send_seq=11916 receive_seq=11916 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001710 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12868 bytes_read=41528 bytes_retransmit=0 bytes_invalid=0 send_seq=2119 receive_seq=2119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999586 adj=49999069  heater_bed: target=60 temp=60.2 pwm=0.368 raspberry_pi: temp=40.8 mcu_temp: temp=32.4 chamber: temp=20.3 sysload=0.93 cputime=178.034 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2389.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=233447 bytes_read=590255 bytes_retransmit=0 bytes_invalid=0 send_seq=11930 receive_seq=11930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001706 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=12874 bytes_read=41544 bytes_retransmit=0 bytes_invalid=0 send_seq=2120 receive_seq=2120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999077  heater_bed: target=60 temp=60.2 pwm=0.368 raspberry_pi: temp=40.8 mcu_temp: temp=32.4 chamber: temp=20.4 sysload=0.93 cputime=178.148 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2390.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=233696 bytes_read=590728 bytes_retransmit=0 bytes_invalid=0 send_seq=11945 receive_seq=11945 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001704 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12880 bytes_read=41573 bytes_retransmit=0 bytes_invalid=0 send_seq=2121 receive_seq=2121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999585 adj=49999118  heater_bed: target=60 temp=60.1 pwm=0.432 raspberry_pi: temp=40.8 mcu_temp: temp=32.4 chamber: temp=20.4 sysload=0.93 cputime=178.263 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2391.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=233880 bytes_read=591205 bytes_retransmit=0 bytes_invalid=0 send_seq=11958 receive_seq=11958 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001702 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12886 bytes_read=41589 bytes_retransmit=0 bytes_invalid=0 send_seq=2122 receive_seq=2122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999585 adj=49999100  heater_bed: target=60 temp=60.1 pwm=0.432 raspberry_pi: temp=40.8 mcu_temp: temp=32.5 chamber: temp=20.3 sysload=0.93 cputime=178.375 memavail=698552 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2392.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=234113 bytes_read=591643 bytes_retransmit=0 bytes_invalid=0 send_seq=11972 receive_seq=11972 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001698 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12892 bytes_read=41605 bytes_retransmit=0 bytes_invalid=0 send_seq=2123 receive_seq=2123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999585 adj=49999107  heater_bed: target=60 temp=60.1 pwm=0.432 raspberry_pi: temp=40.8 mcu_temp: temp=32.5 chamber: temp=20.3 sysload=0.93 cputime=178.490 memavail=698552 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.4 pwm=0.000
Stats 2393.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=234395 bytes_read=592101 bytes_retransmit=0 bytes_invalid=0 send_seq=11987 receive_seq=11987 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001692 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12898 bytes_read=41621 bytes_retransmit=0 bytes_invalid=0 send_seq=2124 receive_seq=2124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999130  heater_bed: target=60 temp=60.1 pwm=0.432 raspberry_pi: temp=40.8 mcu_temp: temp=32.5 chamber: temp=20.3 sysload=0.93 cputime=178.599 memavail=699632 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2394.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=234590 bytes_read=592578 bytes_retransmit=0 bytes_invalid=0 send_seq=12000 receive_seq=12000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001686 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12904 bytes_read=41637 bytes_retransmit=0 bytes_invalid=0 send_seq=2125 receive_seq=2125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999589 adj=49999177  heater_bed: target=60 temp=60.1 pwm=0.372 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.3 sysload=0.93 cputime=178.706 memavail=699740 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2395.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=234774 bytes_read=593026 bytes_retransmit=0 bytes_invalid=0 send_seq=12013 receive_seq=12013 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001683 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12910 bytes_read=41666 bytes_retransmit=0 bytes_invalid=0 send_seq=2126 receive_seq=2126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999227  heater_bed: target=60 temp=60.1 pwm=0.372 raspberry_pi: temp=40.8 mcu_temp: temp=32.5 chamber: temp=20.4 sysload=0.94 cputime=178.816 memavail=699740 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2396.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=234974 bytes_read=593479 bytes_retransmit=0 bytes_invalid=0 send_seq=12027 receive_seq=12027 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001676 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12916 bytes_read=41682 bytes_retransmit=0 bytes_invalid=0 send_seq=2127 receive_seq=2127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999237  heater_bed: target=60 temp=60.1 pwm=0.426 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.3 sysload=0.94 cputime=178.921 memavail=699740 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2397.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=235158 bytes_read=593956 bytes_retransmit=0 bytes_invalid=0 send_seq=12040 receive_seq=12040 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001670 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12922 bytes_read=41698 bytes_retransmit=0 bytes_invalid=0 send_seq=2128 receive_seq=2128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999240  heater_bed: target=60 temp=60.1 pwm=0.426 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.3 sysload=0.94 cputime=179.035 memavail=699492 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2398.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=235342 bytes_read=594389 bytes_retransmit=0 bytes_invalid=0 send_seq=12053 receive_seq=12053 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001663 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12928 bytes_read=41714 bytes_retransmit=0 bytes_invalid=0 send_seq=2129 receive_seq=2129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999240  heater_bed: target=60 temp=60.1 pwm=0.426 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.4 sysload=0.94 cputime=179.143 memavail=699492 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2399.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=235537 bytes_read=594851 bytes_retransmit=0 bytes_invalid=0 send_seq=12066 receive_seq=12066 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001661 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=12934 bytes_read=41730 bytes_retransmit=0 bytes_invalid=0 send_seq=2130 receive_seq=2130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999589 adj=49999237  heater_bed: target=60 temp=60.1 pwm=0.375 raspberry_pi: temp=41.3 mcu_temp: temp=32.5 chamber: temp=20.4 sysload=0.94 cputime=179.257 memavail=698868 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2400.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=235721 bytes_read=595329 bytes_retransmit=0 bytes_invalid=0 send_seq=12079 receive_seq=12079 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001661 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12940 bytes_read=41759 bytes_retransmit=0 bytes_invalid=0 send_seq=2131 receive_seq=2131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999193  heater_bed: target=60 temp=60.1 pwm=0.375 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.5 sysload=0.94 cputime=179.372 memavail=698996 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2401.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=236003 bytes_read=595772 bytes_retransmit=0 bytes_invalid=0 send_seq=12094 receive_seq=12094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001661 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12946 bytes_read=41775 bytes_retransmit=0 bytes_invalid=0 send_seq=2132 receive_seq=2132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999163  heater_bed: target=60 temp=60.1 pwm=0.375 raspberry_pi: temp=41.3 mcu_temp: temp=32.6 chamber: temp=20.5 sysload=0.94 cputime=179.492 memavail=698996 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2402.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=236187 bytes_read=596249 bytes_retransmit=0 bytes_invalid=0 send_seq=12107 receive_seq=12107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001657 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12952 bytes_read=41791 bytes_retransmit=0 bytes_invalid=0 send_seq=2133 receive_seq=2133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999138  heater_bed: target=60 temp=60.1 pwm=0.375 raspberry_pi: temp=40.8 mcu_temp: temp=32.7 chamber: temp=20.5 sysload=0.94 cputime=179.604 memavail=698892 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2403.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=236447 bytes_read=596707 bytes_retransmit=0 bytes_invalid=0 send_seq=12122 receive_seq=12122 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001657 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12958 bytes_read=41807 bytes_retransmit=0 bytes_invalid=0 send_seq=2134 receive_seq=2134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999149  heater_bed: target=60 temp=60.2 pwm=0.368 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.5 sysload=0.94 cputime=179.712 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2404.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=236680 bytes_read=597145 bytes_retransmit=0 bytes_invalid=0 send_seq=12136 receive_seq=12136 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001661 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=12964 bytes_read=41823 bytes_retransmit=0 bytes_invalid=0 send_seq=2135 receive_seq=2135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999139  heater_bed: target=60 temp=60.2 pwm=0.368 raspberry_pi: temp=41.3 mcu_temp: temp=32.5 chamber: temp=20.4 sysload=0.94 cputime=179.826 memavail=698760 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2405.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=236864 bytes_read=597637 bytes_retransmit=0 bytes_invalid=0 send_seq=12149 receive_seq=12149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001657 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=12970 bytes_read=41852 bytes_retransmit=0 bytes_invalid=0 send_seq=2136 receive_seq=2136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999124  heater_bed: target=60 temp=60.2 pwm=0.368 raspberry_pi: temp=40.8 mcu_temp: temp=32.8 chamber: temp=20.3 sysload=0.95 cputime=179.942 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2406.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=237064 bytes_read=598090 bytes_retransmit=0 bytes_invalid=0 send_seq=12163 receive_seq=12163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001655 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=12982 bytes_read=41884 bytes_retransmit=0 bytes_invalid=0 send_seq=2138 receive_seq=2138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999153  heater_bed: target=60 temp=60.3 pwm=0.312 raspberry_pi: temp=40.8 mcu_temp: temp=32.8 chamber: temp=20.3 sysload=0.95 cputime=180.062 memavail=698516 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2407.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=237248 bytes_read=598523 bytes_retransmit=0 bytes_invalid=0 send_seq=12176 receive_seq=12176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001653 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=12988 bytes_read=41900 bytes_retransmit=0 bytes_invalid=0 send_seq=2139 receive_seq=2139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999427  heater_bed: target=60 temp=60.3 pwm=0.312 raspberry_pi: temp=40.8 mcu_temp: temp=32.8 chamber: temp=20.3 sysload=0.95 cputime=180.173 memavail=698516 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2408.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=237464 bytes_read=599002 bytes_retransmit=0 bytes_invalid=0 send_seq=12191 receive_seq=12191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001648 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=12994 bytes_read=41916 bytes_retransmit=0 bytes_invalid=0 send_seq=2140 receive_seq=2140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999347  heater_bed: target=60 temp=60.4 pwm=0.279 raspberry_pi: temp=41.3 mcu_temp: temp=32.8 chamber: temp=20.4 sysload=0.95 cputime=180.286 memavail=698604 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2409.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=237659 bytes_read=599437 bytes_retransmit=0 bytes_invalid=0 send_seq=12204 receive_seq=12204 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001647 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13000 bytes_read=41932 bytes_retransmit=0 bytes_invalid=0 send_seq=2141 receive_seq=2141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999319  heater_bed: target=60 temp=60.4 pwm=0.350 raspberry_pi: temp=41.3 mcu_temp: temp=32.8 chamber: temp=20.3 sysload=0.95 cputime=180.401 memavail=698788 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2410.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=237843 bytes_read=599885 bytes_retransmit=0 bytes_invalid=0 send_seq=12217 receive_seq=12217 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001644 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13006 bytes_read=41961 bytes_retransmit=0 bytes_invalid=0 send_seq=2142 receive_seq=2142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999271  heater_bed: target=60 temp=60.4 pwm=0.350 raspberry_pi: temp=40.8 mcu_temp: temp=32.8 chamber: temp=20.4 sysload=0.95 cputime=180.510 memavail=698772 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2411.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=238027 bytes_read=600362 bytes_retransmit=0 bytes_invalid=0 send_seq=12230 receive_seq=12230 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001640 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13012 bytes_read=41977 bytes_retransmit=0 bytes_invalid=0 send_seq=2143 receive_seq=2143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999233  heater_bed: target=60 temp=60.4 pwm=0.350 raspberry_pi: temp=40.8 mcu_temp: temp=32.8 chamber: temp=20.4 sysload=0.95 cputime=180.618 memavail=698400 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2412.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=238227 bytes_read=600815 bytes_retransmit=0 bytes_invalid=0 send_seq=12244 receive_seq=12244 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001633 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13018 bytes_read=41993 bytes_retransmit=0 bytes_invalid=0 send_seq=2144 receive_seq=2144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999329  heater_bed: target=60 temp=60.4 pwm=0.296 raspberry_pi: temp=40.8 mcu_temp: temp=32.6 chamber: temp=20.4 sysload=0.95 cputime=180.729 memavail=698528 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2413.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=238411 bytes_read=601248 bytes_retransmit=0 bytes_invalid=0 send_seq=12257 receive_seq=12257 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001628 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13024 bytes_read=42009 bytes_retransmit=0 bytes_invalid=0 send_seq=2145 receive_seq=2145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999295  heater_bed: target=60 temp=60.4 pwm=0.296 raspberry_pi: temp=41.3 mcu_temp: temp=32.8 chamber: temp=20.5 sysload=0.95 cputime=180.837 memavail=698516 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2414.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=238595 bytes_read=601725 bytes_retransmit=0 bytes_invalid=0 send_seq=12270 receive_seq=12270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001624 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13030 bytes_read=42025 bytes_retransmit=0 bytes_invalid=0 send_seq=2146 receive_seq=2146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999266  heater_bed: target=60 temp=60.5 pwm=0.296 raspberry_pi: temp=40.8 mcu_temp: temp=32.9 chamber: temp=20.5 sysload=0.95 cputime=180.944 memavail=698168 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.5 pwm=0.000
Stats 2415.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=238774 bytes_read=602183 bytes_retransmit=0 bytes_invalid=0 send_seq=12282 receive_seq=12282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001658 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13036 bytes_read=42054 bytes_retransmit=0 bytes_invalid=0 send_seq=2147 receive_seq=2147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999255  heater_bed: target=60 temp=60.5 pwm=0.296 raspberry_pi: temp=40.8 mcu_temp: temp=32.9 chamber: temp=20.4 sysload=0.96 cputime=181.054 memavail=698184 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2416.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=238958 bytes_read=602631 bytes_retransmit=0 bytes_invalid=0 send_seq=12295 receive_seq=12295 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001657 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13042 bytes_read=42070 bytes_retransmit=0 bytes_invalid=0 send_seq=2148 receive_seq=2148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999087  heater_bed: target=60 temp=60.5 pwm=0.264 raspberry_pi: temp=40.8 mcu_temp: temp=32.8 chamber: temp=20.4 sysload=0.96 cputime=181.164 memavail=698280 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2417.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=239169 bytes_read=603113 bytes_retransmit=0 bytes_invalid=0 send_seq=12309 receive_seq=12309 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001658 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13048 bytes_read=42086 bytes_retransmit=0 bytes_invalid=0 send_seq=2149 receive_seq=2149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999105  heater_bed: target=60 temp=60.4 pwm=0.328 raspberry_pi: temp=40.2 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.96 cputime=181.271 memavail=697876 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2418.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=239353 bytes_read=603546 bytes_retransmit=0 bytes_invalid=0 send_seq=12322 receive_seq=12322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001656 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13054 bytes_read=42102 bytes_retransmit=0 bytes_invalid=0 send_seq=2150 receive_seq=2150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999155  heater_bed: target=60 temp=60.4 pwm=0.328 raspberry_pi: temp=40.8 mcu_temp: temp=32.9 chamber: temp=20.4 sysload=0.96 cputime=181.373 memavail=698040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2419.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=239553 bytes_read=603984 bytes_retransmit=0 bytes_invalid=0 send_seq=12336 receive_seq=12336 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001651 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13060 bytes_read=42118 bytes_retransmit=0 bytes_invalid=0 send_seq=2151 receive_seq=2151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999158  heater_bed: target=60 temp=60.4 pwm=0.380 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.5 sysload=0.96 cputime=181.486 memavail=698040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2420.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=239737 bytes_read=604491 bytes_retransmit=0 bytes_invalid=0 send_seq=12349 receive_seq=12349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001650 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13066 bytes_read=42147 bytes_retransmit=0 bytes_invalid=0 send_seq=2152 receive_seq=2152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999183  heater_bed: target=60 temp=60.3 pwm=0.380 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.88 cputime=181.593 memavail=697936 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2421.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=239921 bytes_read=604924 bytes_retransmit=0 bytes_invalid=0 send_seq=12362 receive_seq=12362 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001648 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13072 bytes_read=42163 bytes_retransmit=0 bytes_invalid=0 send_seq=2153 receive_seq=2153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999168  heater_bed: target=60 temp=60.3 pwm=0.380 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.88 cputime=181.700 memavail=698040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2422.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=240105 bytes_read=605372 bytes_retransmit=0 bytes_invalid=0 send_seq=12375 receive_seq=12375 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001644 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13078 bytes_read=42179 bytes_retransmit=0 bytes_invalid=0 send_seq=2154 receive_seq=2154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999211  heater_bed: target=60 temp=60.3 pwm=0.380 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.88 cputime=181.814 memavail=698040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2423.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=240327 bytes_read=605854 bytes_retransmit=0 bytes_invalid=0 send_seq=12389 receive_seq=12389 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001640 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13084 bytes_read=42195 bytes_retransmit=0 bytes_invalid=0 send_seq=2155 receive_seq=2155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999193  heater_bed: target=60 temp=60.2 pwm=0.458 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.88 cputime=181.929 memavail=697832 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2424.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=240527 bytes_read=606292 bytes_retransmit=0 bytes_invalid=0 send_seq=12403 receive_seq=12403 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001638 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13090 bytes_read=42211 bytes_retransmit=0 bytes_invalid=0 send_seq=2156 receive_seq=2156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999182  heater_bed: target=60 temp=60.2 pwm=0.402 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.88 cputime=182.046 memavail=698052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2425.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=240711 bytes_read=606755 bytes_retransmit=0 bytes_invalid=0 send_seq=12416 receive_seq=12416 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001636 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=13096 bytes_read=42240 bytes_retransmit=0 bytes_invalid=0 send_seq=2157 receive_seq=2157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999154  heater_bed: target=60 temp=60.2 pwm=0.402 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.3 sysload=0.81 cputime=182.146 memavail=698052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.6 pwm=0.000
Stats 2426.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=240922 bytes_read=607237 bytes_retransmit=0 bytes_invalid=0 send_seq=12430 receive_seq=12430 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001632 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=13102 bytes_read=42256 bytes_retransmit=0 bytes_invalid=0 send_seq=2158 receive_seq=2158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999149  heater_bed: target=60 temp=60.1 pwm=0.391 raspberry_pi: temp=40.8 mcu_temp: temp=33.0 chamber: temp=20.4 sysload=0.81 cputime=182.261 memavail=697948 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2427.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=241122 bytes_read=607675 bytes_retransmit=0 bytes_invalid=0 send_seq=12444 receive_seq=12444 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001626 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=13108 bytes_read=42272 bytes_retransmit=0 bytes_invalid=0 send_seq=2159 receive_seq=2159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999143  heater_bed: target=60 temp=60.2 pwm=0.332 raspberry_pi: temp=40.8 mcu_temp: temp=33.1 chamber: temp=20.4 sysload=0.81 cputime=182.369 memavail=698052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2428.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=241312 bytes_read=608123 bytes_retransmit=0 bytes_invalid=0 send_seq=12458 receive_seq=12457 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001633 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=13114 bytes_read=42288 bytes_retransmit=0 bytes_invalid=0 send_seq=2160 receive_seq=2160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999162  heater_bed: target=60 temp=60.2 pwm=0.332 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.4 sysload=0.81 cputime=182.481 memavail=698052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2429.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=241496 bytes_read=608616 bytes_retransmit=0 bytes_invalid=0 send_seq=12471 receive_seq=12471 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001633 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=13120 bytes_read=42304 bytes_retransmit=0 bytes_invalid=0 send_seq=2161 receive_seq=2161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999092  heater_bed: target=60 temp=60.1 pwm=0.332 raspberry_pi: temp=40.8 mcu_temp: temp=33.1 chamber: temp=20.2 sysload=0.81 cputime=182.593 memavail=697948 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2430.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=241680 bytes_read=609064 bytes_retransmit=0 bytes_invalid=0 send_seq=12484 receive_seq=12484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001631 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13126 bytes_read=42333 bytes_retransmit=0 bytes_invalid=0 send_seq=2162 receive_seq=2162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999135  heater_bed: target=60 temp=60.1 pwm=0.332 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.4 sysload=0.74 cputime=182.704 memavail=698064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2431.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=241880 bytes_read=609517 bytes_retransmit=0 bytes_invalid=0 send_seq=12498 receive_seq=12498 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001634 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13132 bytes_read=42349 bytes_retransmit=0 bytes_invalid=0 send_seq=2163 receive_seq=2163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999148  heater_bed: target=60 temp=60.2 pwm=0.305 raspberry_pi: temp=40.2 mcu_temp: temp=33.2 chamber: temp=20.3 sysload=0.74 cputime=182.817 memavail=698064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2432.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=242080 bytes_read=609985 bytes_retransmit=0 bytes_invalid=0 send_seq=12512 receive_seq=12512 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001630 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13138 bytes_read=42365 bytes_retransmit=0 bytes_invalid=0 send_seq=2164 receive_seq=2164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999106  heater_bed: target=60 temp=60.2 pwm=0.372 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.4 sysload=0.74 cputime=182.930 memavail=698132 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2433.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=242264 bytes_read=610409 bytes_retransmit=0 bytes_invalid=0 send_seq=12525 receive_seq=12525 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001628 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13144 bytes_read=42381 bytes_retransmit=0 bytes_invalid=0 send_seq=2165 receive_seq=2165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999105  heater_bed: target=60 temp=60.1 pwm=0.372 raspberry_pi: temp=40.2 mcu_temp: temp=33.2 chamber: temp=20.3 sysload=0.74 cputime=183.052 memavail=698580 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.7 pwm=0.000
Stats 2434.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=242448 bytes_read=610886 bytes_retransmit=0 bytes_invalid=0 send_seq=12538 receive_seq=12538 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001628 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13150 bytes_read=42397 bytes_retransmit=0 bytes_invalid=0 send_seq=2166 receive_seq=2166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999118  heater_bed: target=60 temp=60.1 pwm=0.372 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.4 sysload=0.74 cputime=183.164 memavail=698580 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2435.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=242632 bytes_read=611349 bytes_retransmit=0 bytes_invalid=0 send_seq=12551 receive_seq=12551 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001624 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13156 bytes_read=42426 bytes_retransmit=0 bytes_invalid=0 send_seq=2167 receive_seq=2167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999213  heater_bed: target=60 temp=60.1 pwm=0.372 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.3 sysload=0.68 cputime=183.266 memavail=698476 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2436.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=242848 bytes_read=611792 bytes_retransmit=0 bytes_invalid=0 send_seq=12566 receive_seq=12566 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001621 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13162 bytes_read=42442 bytes_retransmit=0 bytes_invalid=0 send_seq=2168 receive_seq=2168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999211  heater_bed: target=60 temp=60.1 pwm=0.370 raspberry_pi: temp=41.3 mcu_temp: temp=33.2 chamber: temp=20.4 sysload=0.68 cputime=183.389 memavail=698476 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2437.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=243048 bytes_read=612274 bytes_retransmit=0 bytes_invalid=0 send_seq=12580 receive_seq=12580 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001620 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13168 bytes_read=42458 bytes_retransmit=0 bytes_invalid=0 send_seq=2169 receive_seq=2169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999206  heater_bed: target=60 temp=60.2 pwm=0.304 raspberry_pi: temp=41.3 mcu_temp: temp=33.2 chamber: temp=20.3 sysload=0.68 cputime=183.501 memavail=698580 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2438.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=243232 bytes_read=612722 bytes_retransmit=0 bytes_invalid=0 send_seq=12593 receive_seq=12593 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001619 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13174 bytes_read=42474 bytes_retransmit=0 bytes_invalid=0 send_seq=2170 receive_seq=2170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999192  heater_bed: target=60 temp=60.2 pwm=0.304 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.3 sysload=0.68 cputime=183.609 memavail=698776 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2439.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=243448 bytes_read=613165 bytes_retransmit=0 bytes_invalid=0 send_seq=12608 receive_seq=12608 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001611 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13180 bytes_read=42490 bytes_retransmit=0 bytes_invalid=0 send_seq=2171 receive_seq=2171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999182  heater_bed: target=60 temp=60.2 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.3 sysload=0.68 cputime=183.723 memavail=698836 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2440.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=243632 bytes_read=613657 bytes_retransmit=0 bytes_invalid=0 send_seq=12621 receive_seq=12621 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001610 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13186 bytes_read=42519 bytes_retransmit=0 bytes_invalid=0 send_seq=2172 receive_seq=2172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999197  heater_bed: target=60 temp=60.2 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=33.2 chamber: temp=20.4 sysload=0.63 cputime=183.835 memavail=698836 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2441.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=243816 bytes_read=614105 bytes_retransmit=0 bytes_invalid=0 send_seq=12634 receive_seq=12634 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001612 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13192 bytes_read=42535 bytes_retransmit=0 bytes_invalid=0 send_seq=2173 receive_seq=2173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999174  heater_bed: target=60 temp=60.3 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.4 sysload=0.63 cputime=183.936 memavail=698732 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2442.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=244000 bytes_read=614538 bytes_retransmit=0 bytes_invalid=0 send_seq=12647 receive_seq=12647 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001614 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13198 bytes_read=42551 bytes_retransmit=0 bytes_invalid=0 send_seq=2174 receive_seq=2174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999154  heater_bed: target=60 temp=60.3 pwm=0.316 raspberry_pi: temp=40.2 mcu_temp: temp=33.3 chamber: temp=20.4 sysload=0.63 cputime=184.058 memavail=698592 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2443.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=244200 bytes_read=615020 bytes_retransmit=0 bytes_invalid=0 send_seq=12661 receive_seq=12661 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001619 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13204 bytes_read=42567 bytes_retransmit=0 bytes_invalid=0 send_seq=2175 receive_seq=2175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999147  heater_bed: target=60 temp=60.3 pwm=0.303 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.4 sysload=0.63 cputime=184.155 memavail=698992 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2444.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=244392 bytes_read=615468 bytes_retransmit=0 bytes_invalid=0 send_seq=12675 receive_seq=12674 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001617 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13210 bytes_read=42583 bytes_retransmit=0 bytes_invalid=0 send_seq=2176 receive_seq=2176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999120  heater_bed: target=60 temp=60.2 pwm=0.303 raspberry_pi: temp=40.8 mcu_temp: temp=33.3 chamber: temp=20.3 sysload=0.63 cputime=184.239 memavail=699192 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2445.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=244571 bytes_read=615916 bytes_retransmit=0 bytes_invalid=0 send_seq=12687 receive_seq=12687 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001616 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13216 bytes_read=42612 bytes_retransmit=0 bytes_invalid=0 send_seq=2177 receive_seq=2177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999084  heater_bed: target=60 temp=60.3 pwm=0.303 raspberry_pi: temp=40.8 mcu_temp: temp=33.5 chamber: temp=20.4 sysload=0.58 cputime=184.353 memavail=699352 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2446.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=244750 bytes_read=616383 bytes_retransmit=0 bytes_invalid=0 send_seq=12699 receive_seq=12698 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001615 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13222 bytes_read=42628 bytes_retransmit=0 bytes_invalid=0 send_seq=2178 receive_seq=2178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999092  heater_bed: target=60 temp=60.2 pwm=0.303 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.4 sysload=0.58 cputime=184.465 memavail=699352 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2447.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=244929 bytes_read=616831 bytes_retransmit=0 bytes_invalid=0 send_seq=12711 receive_seq=12711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001611 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13228 bytes_read=42644 bytes_retransmit=0 bytes_invalid=0 send_seq=2179 receive_seq=2179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999106  heater_bed: target=60 temp=60.2 pwm=0.303 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.4 sysload=0.58 cputime=184.574 memavail=699248 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2448.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=245116 bytes_read=617259 bytes_retransmit=0 bytes_invalid=0 send_seq=12723 receive_seq=12723 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001607 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13234 bytes_read=42660 bytes_retransmit=0 bytes_invalid=0 send_seq=2180 receive_seq=2180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999176  heater_bed: target=60 temp=60.2 pwm=0.330 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.5 sysload=0.58 cputime=184.674 memavail=697740 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.8 pwm=0.000
Stats 2449.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=245308 bytes_read=617756 bytes_retransmit=0 bytes_invalid=0 send_seq=12737 receive_seq=12737 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001607 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13240 bytes_read=42676 bytes_retransmit=0 bytes_invalid=0 send_seq=2181 receive_seq=2181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999187  heater_bed: target=60 temp=60.2 pwm=0.330 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.4 sysload=0.58 cputime=184.764 memavail=698860 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2450.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=245492 bytes_read=618199 bytes_retransmit=0 bytes_invalid=0 send_seq=12750 receive_seq=12749 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001603 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13246 bytes_read=42705 bytes_retransmit=0 bytes_invalid=0 send_seq=2182 receive_seq=2182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999131  heater_bed: target=60 temp=60.2 pwm=0.330 raspberry_pi: temp=40.8 mcu_temp: temp=33.5 chamber: temp=20.4 sysload=0.53 cputime=184.883 memavail=698860 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2451.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=245663 bytes_read=618627 bytes_retransmit=0 bytes_invalid=0 send_seq=12761 receive_seq=12761 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001600 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13252 bytes_read=42721 bytes_retransmit=0 bytes_invalid=0 send_seq=2183 receive_seq=2183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999170  heater_bed: target=60 temp=60.1 pwm=0.330 raspberry_pi: temp=40.8 mcu_temp: temp=33.5 chamber: temp=20.4 sysload=0.53 cputime=184.987 memavail=698860 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=23.9 pwm=0.000
Stats 2452.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=245874 bytes_read=619109 bytes_retransmit=0 bytes_invalid=0 send_seq=12775 receive_seq=12775 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001600 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13258 bytes_read=42737 bytes_retransmit=0 bytes_invalid=0 send_seq=2184 receive_seq=2184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999200  heater_bed: target=60 temp=60.1 pwm=0.292 raspberry_pi: temp=40.8 mcu_temp: temp=33.5 chamber: temp=20.4 sysload=0.53 cputime=185.101 memavail=698860 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2453.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=246069 bytes_read=619557 bytes_retransmit=0 bytes_invalid=0 send_seq=12788 receive_seq=12788 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001597 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13264 bytes_read=42753 bytes_retransmit=0 bytes_invalid=0 send_seq=2185 receive_seq=2185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999205  heater_bed: target=60 temp=60.1 pwm=0.349 raspberry_pi: temp=40.8 mcu_temp: temp=33.6 chamber: temp=20.4 sysload=0.53 cputime=185.217 memavail=698472 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2454.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=246248 bytes_read=620000 bytes_retransmit=0 bytes_invalid=0 send_seq=12800 receive_seq=12800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001595 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13270 bytes_read=42769 bytes_retransmit=0 bytes_invalid=0 send_seq=2186 receive_seq=2186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999197  heater_bed: target=60 temp=60.1 pwm=0.349 raspberry_pi: temp=40.8 mcu_temp: temp=33.4 chamber: temp=20.5 sysload=0.53 cputime=185.332 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2455.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=246427 bytes_read=620486 bytes_retransmit=0 bytes_invalid=0 send_seq=12812 receive_seq=12812 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001597 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13276 bytes_read=42798 bytes_retransmit=0 bytes_invalid=0 send_seq=2187 receive_seq=2187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999206  heater_bed: target=60 temp=60.1 pwm=0.349 raspberry_pi: temp=40.8 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.49 cputime=185.445 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2456.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=246606 bytes_read=620901 bytes_retransmit=0 bytes_invalid=0 send_seq=12824 receive_seq=12824 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001598 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13282 bytes_read=42813 bytes_retransmit=0 bytes_invalid=0 send_seq=2188 receive_seq=2188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999178  heater_bed: target=60 temp=60.1 pwm=0.349 raspberry_pi: temp=40.2 mcu_temp: temp=33.7 chamber: temp=20.5 sysload=0.49 cputime=185.557 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2457.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=246801 bytes_read=621341 bytes_retransmit=0 bytes_invalid=0 send_seq=12837 receive_seq=12837 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001597 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13288 bytes_read=42828 bytes_retransmit=0 bytes_invalid=0 send_seq=2189 receive_seq=2189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999146  heater_bed: target=60 temp=60.0 pwm=0.340 raspberry_pi: temp=40.8 mcu_temp: temp=33.5 chamber: temp=20.4 sysload=0.49 cputime=185.670 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2458.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=247026 bytes_read=621823 bytes_retransmit=0 bytes_invalid=0 send_seq=12851 receive_seq=12851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001595 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13294 bytes_read=42843 bytes_retransmit=0 bytes_invalid=0 send_seq=2190 receive_seq=2190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999128  heater_bed: target=60 temp=60.0 pwm=0.366 raspberry_pi: temp=40.8 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.49 cputime=185.792 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2459.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=247221 bytes_read=622256 bytes_retransmit=0 bytes_invalid=0 send_seq=12864 receive_seq=12864 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001595 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13300 bytes_read=42858 bytes_retransmit=0 bytes_invalid=0 send_seq=2191 receive_seq=2191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999194  heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=40.2 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.49 cputime=185.905 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2460.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=247400 bytes_read=622743 bytes_retransmit=0 bytes_invalid=0 send_seq=12876 receive_seq=12876 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001587 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13312 bytes_read=42902 bytes_retransmit=0 bytes_invalid=0 send_seq=2193 receive_seq=2193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999183  heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=39.7 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.45 cputime=186.025 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2461.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=247697 bytes_read=623196 bytes_retransmit=0 bytes_invalid=0 send_seq=12891 receive_seq=12890 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001582 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13318 bytes_read=42918 bytes_retransmit=0 bytes_invalid=0 send_seq=2194 receive_seq=2194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999341  heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=40.2 mcu_temp: temp=33.5 chamber: temp=20.3 sysload=0.45 cputime=186.138 memavail=698620 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2462.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=247907 bytes_read=623634 bytes_retransmit=0 bytes_invalid=0 send_seq=12904 receive_seq=12904 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001578 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13324 bytes_read=42934 bytes_retransmit=0 bytes_invalid=0 send_seq=2195 receive_seq=2195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999351  heater_bed: target=60 temp=60.0 pwm=0.314 raspberry_pi: temp=40.2 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.45 cputime=186.243 memavail=698624 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2463.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=248277 bytes_read=624131 bytes_retransmit=0 bytes_invalid=0 send_seq=12922 receive_seq=12921 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001572 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13330 bytes_read=42950 bytes_retransmit=0 bytes_invalid=0 send_seq=2196 receive_seq=2196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999318  heater_bed: target=60 temp=60.1 pwm=0.323 raspberry_pi: temp=40.8 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.45 cputime=186.381 memavail=698628 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2464.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=248522 bytes_read=624594 bytes_retransmit=0 bytes_invalid=0 send_seq=12937 receive_seq=12937 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001566 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13336 bytes_read=42966 bytes_retransmit=0 bytes_invalid=0 send_seq=2197 receive_seq=2197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999337  heater_bed: target=60 temp=60.1 pwm=0.327 raspberry_pi: temp=40.8 mcu_temp: temp=33.6 chamber: temp=20.5 sysload=0.45 cputime=186.496 memavail=698644 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2465.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=248765 bytes_read=625037 bytes_retransmit=0 bytes_invalid=0 send_seq=12950 receive_seq=12949 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001564 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13342 bytes_read=42982 bytes_retransmit=0 bytes_invalid=0 send_seq=2198 receive_seq=2198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999298  heater_bed: target=60 temp=60.1 pwm=0.327 raspberry_pi: temp=40.8 mcu_temp: temp=33.7 chamber: temp=20.5 sysload=0.49 cputime=186.613 memavail=698264 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2466.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=248934 bytes_read=625514 bytes_retransmit=0 bytes_invalid=0 send_seq=12963 receive_seq=12962 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001559 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13348 bytes_read=43011 bytes_retransmit=0 bytes_invalid=0 send_seq=2199 receive_seq=2199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999269  heater_bed: target=60 temp=60.1 pwm=0.327 raspberry_pi: temp=40.8 mcu_temp: temp=33.6 chamber: temp=20.4 sysload=0.49 cputime=186.724 memavail=698392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2467.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=249129 bytes_read=625962 bytes_retransmit=0 bytes_invalid=0 send_seq=12976 receive_seq=12975 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001553 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13354 bytes_read=43027 bytes_retransmit=0 bytes_invalid=0 send_seq=2200 receive_seq=2200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999255  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=40.8 mcu_temp: temp=33.8 chamber: temp=20.4 sysload=0.49 cputime=186.837 memavail=698392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2468.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=249308 bytes_read=626390 bytes_retransmit=0 bytes_invalid=0 send_seq=12988 receive_seq=12987 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001550 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13360 bytes_read=43043 bytes_retransmit=0 bytes_invalid=0 send_seq=2201 receive_seq=2201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999239  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=40.2 mcu_temp: temp=33.7 chamber: temp=20.5 sysload=0.49 cputime=186.949 memavail=698280 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2469.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000017 bytes_write=249492 bytes_read=626872 bytes_retransmit=0 bytes_invalid=0 send_seq=13001 receive_seq=13001 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13366 bytes_read=43059 bytes_retransmit=0 bytes_invalid=0 send_seq=2202 receive_seq=2202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999241  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=40.8 mcu_temp: temp=33.8 chamber: temp=20.5 sysload=0.49 cputime=187.063 memavail=698388 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2470.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=249794 bytes_read=627345 bytes_retransmit=0 bytes_invalid=0 send_seq=13017 receive_seq=13016 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13372 bytes_read=43088 bytes_retransmit=0 bytes_invalid=0 send_seq=2203 receive_seq=2203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999246  heater_bed: target=60 temp=60.2 pwm=0.275 raspberry_pi: temp=40.2 mcu_temp: temp=33.8 chamber: temp=20.5 sysload=0.61 cputime=187.176 memavail=698404 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2471.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=249990 bytes_read=627783 bytes_retransmit=0 bytes_invalid=0 send_seq=13031 receive_seq=13030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13378 bytes_read=43104 bytes_retransmit=0 bytes_invalid=0 send_seq=2204 receive_seq=2204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999211  heater_bed: target=60 temp=60.2 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=33.8 chamber: temp=20.3 sysload=0.61 cputime=187.283 memavail=698196 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2472.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=250265 bytes_read=628270 bytes_retransmit=0 bytes_invalid=0 send_seq=13046 receive_seq=13045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001542 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13384 bytes_read=43120 bytes_retransmit=0 bytes_invalid=0 send_seq=2205 receive_seq=2205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999190  heater_bed: target=60 temp=60.2 pwm=0.336 raspberry_pi: temp=40.2 mcu_temp: temp=33.9 chamber: temp=20.5 sysload=0.61 cputime=187.399 memavail=698404 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2473.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=250429 bytes_read=628713 bytes_retransmit=0 bytes_invalid=0 send_seq=13058 receive_seq=13057 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13390 bytes_read=43136 bytes_retransmit=0 bytes_invalid=0 send_seq=2206 receive_seq=2206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999205  heater_bed: target=60 temp=60.2 pwm=0.336 raspberry_pi: temp=40.8 mcu_temp: temp=33.7 chamber: temp=20.5 sysload=0.61 cputime=187.505 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2474.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=250672 bytes_read=629146 bytes_retransmit=0 bytes_invalid=0 send_seq=13071 receive_seq=13070 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001545 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13396 bytes_read=43152 bytes_retransmit=0 bytes_invalid=0 send_seq=2207 receive_seq=2207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999199  heater_bed: target=60 temp=60.1 pwm=0.336 raspberry_pi: temp=40.8 mcu_temp: temp=33.9 chamber: temp=20.5 sysload=0.61 cputime=187.615 memavail=698392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.0 pwm=0.000
Stats 2475.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=250954 bytes_read=629648 bytes_retransmit=0 bytes_invalid=0 send_seq=13086 receive_seq=13085 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001541 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13402 bytes_read=43168 bytes_retransmit=0 bytes_invalid=0 send_seq=2208 receive_seq=2208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999201  heater_bed: target=60 temp=60.1 pwm=0.336 raspberry_pi: temp=40.2 mcu_temp: temp=34.0 chamber: temp=20.5 sysload=0.65 cputime=187.729 memavail=698408 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2476.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=251182 bytes_read=630096 bytes_retransmit=0 bytes_invalid=0 send_seq=13099 receive_seq=13098 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001541 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=13408 bytes_read=43197 bytes_retransmit=0 bytes_invalid=0 send_seq=2209 receive_seq=2209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999217  heater_bed: target=60 temp=60.1 pwm=0.336 raspberry_pi: temp=40.8 mcu_temp: temp=33.9 chamber: temp=20.5 sysload=0.65 cputime=187.842 memavail=698408 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2477.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=251432 bytes_read=630549 bytes_retransmit=0 bytes_invalid=0 send_seq=13115 receive_seq=13115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001540 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=13414 bytes_read=43213 bytes_retransmit=0 bytes_invalid=0 send_seq=2210 receive_seq=2210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999206  heater_bed: target=60 temp=60.1 pwm=0.331 raspberry_pi: temp=40.8 mcu_temp: temp=33.8 chamber: temp=20.5 sysload=0.65 cputime=187.960 memavail=698252 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2478.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=251622 bytes_read=631036 bytes_retransmit=0 bytes_invalid=0 send_seq=13128 receive_seq=13127 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001538 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=13420 bytes_read=43229 bytes_retransmit=0 bytes_invalid=0 send_seq=2211 receive_seq=2211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999268  heater_bed: target=60 temp=60.1 pwm=0.331 raspberry_pi: temp=40.8 mcu_temp: temp=33.8 chamber: temp=20.5 sysload=0.65 cputime=188.073 memavail=698420 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2479.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=251806 bytes_read=631460 bytes_retransmit=0 bytes_invalid=0 send_seq=13140 receive_seq=13139 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001534 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=13426 bytes_read=43245 bytes_retransmit=0 bytes_invalid=0 send_seq=2212 receive_seq=2212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999256  heater_bed: target=60 temp=60.2 pwm=0.268 raspberry_pi: temp=40.8 mcu_temp: temp=34.1 chamber: temp=20.4 sysload=0.65 cputime=188.189 memavail=698420 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2480.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=252039 bytes_read=631914 bytes_retransmit=0 bytes_invalid=0 send_seq=13154 receive_seq=13153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001534 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=13432 bytes_read=43261 bytes_retransmit=0 bytes_invalid=0 send_seq=2213 receive_seq=2213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999613 adj=49999260  heater_bed: target=60 temp=60.2 pwm=0.268 raspberry_pi: temp=40.2 mcu_temp: temp=33.8 chamber: temp=20.5 sysload=0.91 cputime=188.312 memavail=698316 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2481.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=252218 bytes_read=632382 bytes_retransmit=0 bytes_invalid=0 send_seq=13166 receive_seq=13165 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001530 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13438 bytes_read=43290 bytes_retransmit=0 bytes_invalid=0 send_seq=2214 receive_seq=2214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999265  heater_bed: target=60 temp=60.1 pwm=0.268 raspberry_pi: temp=39.7 mcu_temp: temp=33.9 chamber: temp=20.5 sysload=0.91 cputime=188.423 memavail=698316 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2482.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=252467 bytes_read=632831 bytes_retransmit=0 bytes_invalid=0 send_seq=13180 receive_seq=13179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001548 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13444 bytes_read=43306 bytes_retransmit=0 bytes_invalid=0 send_seq=2215 receive_seq=2215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999241  heater_bed: target=60 temp=60.1 pwm=0.268 raspberry_pi: temp=40.2 mcu_temp: temp=33.9 chamber: temp=20.4 sysload=0.91 cputime=188.534 memavail=698420 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2484.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=252781 bytes_read=633299 bytes_retransmit=0 bytes_invalid=0 send_seq=13197 receive_seq=13196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001550 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13450 bytes_read=43322 bytes_retransmit=0 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999128  heater_bed: target=60 temp=60.1 pwm=0.316 raspberry_pi: temp=39.7 mcu_temp: temp=33.8 chamber: temp=20.5 sysload=0.91 cputime=188.654 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2485.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=252950 bytes_read=633776 bytes_retransmit=0 bytes_invalid=0 send_seq=13210 receive_seq=13209 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001547 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13456 bytes_read=43338 bytes_retransmit=0 bytes_invalid=0 send_seq=2217 receive_seq=2217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999119  heater_bed: target=60 temp=60.1 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=34.0 chamber: temp=20.5 sysload=0.91 cputime=188.780 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2486.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=253198 bytes_read=634229 bytes_retransmit=0 bytes_invalid=0 send_seq=13224 receive_seq=13223 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001546 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13462 bytes_read=43354 bytes_retransmit=0 bytes_invalid=0 send_seq=2218 receive_seq=2218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999128  heater_bed: target=60 temp=60.0 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=34.0 chamber: temp=20.5 sysload=1.00 cputime=188.900 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2487.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=253480 bytes_read=634687 bytes_retransmit=0 bytes_invalid=0 send_seq=13239 receive_seq=13238 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13468 bytes_read=43383 bytes_retransmit=0 bytes_invalid=0 send_seq=2219 receive_seq=2219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999165  heater_bed: target=60 temp=60.0 pwm=0.316 raspberry_pi: temp=40.8 mcu_temp: temp=33.9 chamber: temp=20.5 sysload=1.00 cputime=189.025 memavail=698588 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2488.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=253714 bytes_read=635179 bytes_retransmit=0 bytes_invalid=0 send_seq=13254 receive_seq=13254 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001544 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13474 bytes_read=43399 bytes_retransmit=0 bytes_invalid=0 send_seq=2220 receive_seq=2220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999154  heater_bed: target=60 temp=60.0 pwm=0.304 raspberry_pi: temp=40.2 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.00 cputime=189.139 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2489.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=253893 bytes_read=635607 bytes_retransmit=0 bytes_invalid=0 send_seq=13266 receive_seq=13266 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001542 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13480 bytes_read=43415 bytes_retransmit=0 bytes_invalid=0 send_seq=2221 receive_seq=2221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999154  heater_bed: target=60 temp=60.0 pwm=0.304 raspberry_pi: temp=40.8 mcu_temp: temp=34.0 chamber: temp=20.4 sysload=1.00 cputime=189.253 memavail=698684 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.1 pwm=0.000
Stats 2490.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=254139 bytes_read=636065 bytes_retransmit=0 bytes_invalid=0 send_seq=13281 receive_seq=13281 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001541 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13486 bytes_read=43431 bytes_retransmit=0 bytes_invalid=0 send_seq=2222 receive_seq=2222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999214  heater_bed: target=60 temp=60.1 pwm=0.252 raspberry_pi: temp=40.8 mcu_temp: temp=34.0 chamber: temp=20.5 sysload=1.00 cputime=189.359 memavail=698580 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2491.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=254388 bytes_read=636567 bytes_retransmit=0 bytes_invalid=0 send_seq=13296 receive_seq=13296 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001539 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=13492 bytes_read=43447 bytes_retransmit=0 bytes_invalid=0 send_seq=2223 receive_seq=2223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999229  heater_bed: target=60 temp=60.1 pwm=0.312 raspberry_pi: temp=40.8 mcu_temp: temp=34.0 chamber: temp=20.5 sysload=1.24 cputime=189.476 memavail=698696 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2492.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=254575 bytes_read=636995 bytes_retransmit=0 bytes_invalid=0 send_seq=13309 receive_seq=13308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001535 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13498 bytes_read=43476 bytes_retransmit=0 bytes_invalid=0 send_seq=2224 receive_seq=2224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999225  heater_bed: target=60 temp=60.1 pwm=0.312 raspberry_pi: temp=39.7 mcu_temp: temp=34.1 chamber: temp=20.5 sysload=1.24 cputime=189.598 memavail=698696 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.2 pwm=0.000
Stats 2493.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=254775 bytes_read=637477 bytes_retransmit=0 bytes_invalid=0 send_seq=13323 receive_seq=13322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001531 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13504 bytes_read=43492 bytes_retransmit=0 bytes_invalid=0 send_seq=2225 receive_seq=2225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999217  heater_bed: target=60 temp=60.1 pwm=0.256 raspberry_pi: temp=39.7 mcu_temp: temp=34.1 chamber: temp=20.5 sysload=1.24 cputime=189.723 memavail=698592 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2494.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=255018 bytes_read=637925 bytes_retransmit=0 bytes_invalid=0 send_seq=13336 receive_seq=13335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001529 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13510 bytes_read=43508 bytes_retransmit=0 bytes_invalid=0 send_seq=2226 receive_seq=2226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999220  heater_bed: target=60 temp=60.1 pwm=0.256 raspberry_pi: temp=39.7 mcu_temp: temp=34.1 chamber: temp=20.5 sysload=1.24 cputime=189.832 memavail=698960 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2495.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=255242 bytes_read=638363 bytes_retransmit=0 bytes_invalid=0 send_seq=13350 receive_seq=13349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001525 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13516 bytes_read=43524 bytes_retransmit=0 bytes_invalid=0 send_seq=2227 receive_seq=2227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999204  heater_bed: target=60 temp=60.2 pwm=0.256 raspberry_pi: temp=39.7 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.24 cputime=189.949 memavail=698960 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2496.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=255407 bytes_read=638850 bytes_retransmit=0 bytes_invalid=0 send_seq=13361 receive_seq=13361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001523 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=13522 bytes_read=43540 bytes_retransmit=0 bytes_invalid=0 send_seq=2228 receive_seq=2228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999202  heater_bed: target=60 temp=60.2 pwm=0.256 raspberry_pi: temp=40.8 mcu_temp: temp=34.2 chamber: temp=20.4 sysload=1.30 cputime=190.055 memavail=699036 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2497.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=255656 bytes_read=639308 bytes_retransmit=0 bytes_invalid=0 send_seq=13376 receive_seq=13376 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001521 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=13528 bytes_read=43569 bytes_retransmit=0 bytes_invalid=0 send_seq=2229 receive_seq=2229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999179  heater_bed: target=60 temp=60.2 pwm=0.269 raspberry_pi: temp=40.2 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.30 cputime=190.167 memavail=699212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2498.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=255835 bytes_read=639736 bytes_retransmit=0 bytes_invalid=0 send_seq=13388 receive_seq=13388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001520 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=13534 bytes_read=43585 bytes_retransmit=0 bytes_invalid=0 send_seq=2230 receive_seq=2230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999182  heater_bed: target=60 temp=60.2 pwm=0.269 raspberry_pi: temp=40.8 mcu_temp: temp=34.3 chamber: temp=20.4 sysload=1.30 cputime=190.280 memavail=699212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2499.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=256063 bytes_read=640213 bytes_retransmit=0 bytes_invalid=0 send_seq=13401 receive_seq=13401 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001526 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=13540 bytes_read=43601 bytes_retransmit=0 bytes_invalid=0 send_seq=2231 receive_seq=2231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999166  heater_bed: target=60 temp=60.2 pwm=0.269 raspberry_pi: temp=40.2 mcu_temp: temp=34.3 chamber: temp=20.6 sysload=1.30 cputime=190.391 memavail=699072 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2500.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=256315 bytes_read=640666 bytes_retransmit=0 bytes_invalid=0 send_seq=13416 receive_seq=13415 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001525 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=13546 bytes_read=43617 bytes_retransmit=0 bytes_invalid=0 send_seq=2232 receive_seq=2232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999161  heater_bed: target=60 temp=60.1 pwm=0.320 raspberry_pi: temp=39.7 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.30 cputime=190.521 memavail=699176 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2501.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=256612 bytes_read=641124 bytes_retransmit=0 bytes_invalid=0 send_seq=13431 receive_seq=13430 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001524 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=13552 bytes_read=43633 bytes_retransmit=0 bytes_invalid=0 send_seq=2233 receive_seq=2233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999188  heater_bed: target=60 temp=60.1 pwm=0.320 raspberry_pi: temp=39.7 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.28 cputime=190.639 memavail=699192 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2502.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=256776 bytes_read=641601 bytes_retransmit=0 bytes_invalid=0 send_seq=13443 receive_seq=13443 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001525 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13558 bytes_read=43662 bytes_retransmit=0 bytes_invalid=0 send_seq=2234 receive_seq=2234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999193  heater_bed: target=60 temp=60.1 pwm=0.320 raspberry_pi: temp=39.7 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.28 cputime=190.754 memavail=699088 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2503.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=256955 bytes_read=642039 bytes_retransmit=0 bytes_invalid=0 send_seq=13455 receive_seq=13454 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001522 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13564 bytes_read=43678 bytes_retransmit=0 bytes_invalid=0 send_seq=2235 receive_seq=2235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999226  heater_bed: target=60 temp=60.1 pwm=0.320 raspberry_pi: temp=40.8 mcu_temp: temp=34.2 chamber: temp=20.6 sysload=1.28 cputime=190.864 memavail=699200 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2504.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=257134 bytes_read=642468 bytes_retransmit=0 bytes_invalid=0 send_seq=13467 receive_seq=13467 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001520 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13570 bytes_read=43694 bytes_retransmit=0 bytes_invalid=0 send_seq=2236 receive_seq=2236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999235  heater_bed: target=60 temp=60.1 pwm=0.320 raspberry_pi: temp=40.2 mcu_temp: temp=34.0 chamber: temp=20.6 sysload=1.28 cputime=190.975 memavail=699124 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2505.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=257345 bytes_read=642929 bytes_retransmit=0 bytes_invalid=0 send_seq=13481 receive_seq=13480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001518 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13576 bytes_read=43710 bytes_retransmit=0 bytes_invalid=0 send_seq=2237 receive_seq=2237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999242  heater_bed: target=60 temp=60.1 pwm=0.314 raspberry_pi: temp=40.2 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.28 cputime=191.085 memavail=699188 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2506.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=257599 bytes_read=643392 bytes_retransmit=0 bytes_invalid=0 send_seq=13494 receive_seq=13493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001520 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13582 bytes_read=43726 bytes_retransmit=0 bytes_invalid=0 send_seq=2238 receive_seq=2238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999230  heater_bed: target=60 temp=60.1 pwm=0.258 raspberry_pi: temp=40.8 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.26 cputime=191.198 memavail=699212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2507.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=257755 bytes_read=643820 bytes_retransmit=0 bytes_invalid=0 send_seq=13505 receive_seq=13505 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001518 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13588 bytes_read=43755 bytes_retransmit=0 bytes_invalid=0 send_seq=2239 receive_seq=2239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999206  heater_bed: target=60 temp=60.2 pwm=0.258 raspberry_pi: temp=40.8 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.26 cputime=191.300 memavail=699212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2508.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=257983 bytes_read=644297 bytes_retransmit=0 bytes_invalid=0 send_seq=13518 receive_seq=13518 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001520 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13594 bytes_read=43771 bytes_retransmit=0 bytes_invalid=0 send_seq=2240 receive_seq=2240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999210  heater_bed: target=60 temp=60.2 pwm=0.258 raspberry_pi: temp=40.2 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.26 cputime=191.416 memavail=699108 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2509.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=258162 bytes_read=644740 bytes_retransmit=0 bytes_invalid=0 send_seq=13530 receive_seq=13530 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001520 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13600 bytes_read=43787 bytes_retransmit=0 bytes_invalid=0 send_seq=2241 receive_seq=2241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999180  heater_bed: target=60 temp=60.2 pwm=0.258 raspberry_pi: temp=40.2 mcu_temp: temp=34.2 chamber: temp=20.5 sysload=1.26 cputime=191.534 memavail=699216 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2510.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=258357 bytes_read=645173 bytes_retransmit=0 bytes_invalid=0 send_seq=13543 receive_seq=13543 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001521 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13606 bytes_read=43803 bytes_retransmit=0 bytes_invalid=0 send_seq=2242 receive_seq=2242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999175  heater_bed: target=60 temp=60.2 pwm=0.277 raspberry_pi: temp=39.7 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.26 cputime=191.649 memavail=699216 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2511.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=258536 bytes_read=645645 bytes_retransmit=0 bytes_invalid=0 send_seq=13555 receive_seq=13555 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001527 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13612 bytes_read=43819 bytes_retransmit=0 bytes_invalid=0 send_seq=2243 receive_seq=2243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999158  heater_bed: target=60 temp=60.2 pwm=0.277 raspberry_pi: temp=40.2 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.24 cputime=191.760 memavail=698972 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.3 pwm=0.000
Stats 2512.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=258769 bytes_read=646113 bytes_retransmit=0 bytes_invalid=0 send_seq=13569 receive_seq=13569 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001526 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13618 bytes_read=43848 bytes_retransmit=0 bytes_invalid=0 send_seq=2244 receive_seq=2244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999127  heater_bed: target=60 temp=60.2 pwm=0.277 raspberry_pi: temp=40.2 mcu_temp: temp=34.4 chamber: temp=20.5 sysload=1.24 cputime=191.874 memavail=698972 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2513.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=259051 bytes_read=646571 bytes_retransmit=0 bytes_invalid=0 send_seq=13584 receive_seq=13584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001528 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13624 bytes_read=43864 bytes_retransmit=0 bytes_invalid=0 send_seq=2245 receive_seq=2245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999140  heater_bed: target=60 temp=60.2 pwm=0.277 raspberry_pi: temp=40.8 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.24 cputime=191.987 memavail=698972 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2514.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=259349 bytes_read=647063 bytes_retransmit=0 bytes_invalid=0 send_seq=13600 receive_seq=13600 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001529 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13630 bytes_read=43880 bytes_retransmit=0 bytes_invalid=0 send_seq=2246 receive_seq=2246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999153  heater_bed: target=60 temp=60.2 pwm=0.275 raspberry_pi: temp=40.8 mcu_temp: temp=34.4 chamber: temp=20.6 sysload=1.24 cputime=192.104 memavail=698828 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2515.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=259631 bytes_read=647506 bytes_retransmit=0 bytes_invalid=0 send_seq=13615 receive_seq=13615 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001527 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13642 bytes_read=43912 bytes_retransmit=0 bytes_invalid=0 send_seq=2248 receive_seq=2248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999185  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=40.8 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.24 cputime=192.221 memavail=698980 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2516.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=259913 bytes_read=647979 bytes_retransmit=0 bytes_invalid=0 send_seq=13630 receive_seq=13630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001522 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13648 bytes_read=43928 bytes_retransmit=0 bytes_invalid=0 send_seq=2249 receive_seq=2249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999358  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=39.7 mcu_temp: temp=34.4 chamber: temp=20.5 sysload=1.22 cputime=192.337 memavail=698980 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2517.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=260195 bytes_read=648466 bytes_retransmit=0 bytes_invalid=0 send_seq=13645 receive_seq=13645 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001517 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13654 bytes_read=43957 bytes_retransmit=0 bytes_invalid=0 send_seq=2250 receive_seq=2250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999350  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=40.2 mcu_temp: temp=34.4 chamber: temp=20.5 sysload=1.22 cputime=192.452 memavail=698900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2518.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=260511 bytes_read=648909 bytes_retransmit=0 bytes_invalid=0 send_seq=13661 receive_seq=13660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001513 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13660 bytes_read=43973 bytes_retransmit=0 bytes_invalid=0 send_seq=2251 receive_seq=2251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999331  heater_bed: target=60 temp=60.1 pwm=0.330 raspberry_pi: temp=40.2 mcu_temp: temp=34.5 chamber: temp=20.4 sysload=1.22 cputime=192.586 memavail=698900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2519.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=260729 bytes_read=649381 bytes_retransmit=0 bytes_invalid=0 send_seq=13675 receive_seq=13675 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001509 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13666 bytes_read=43989 bytes_retransmit=0 bytes_invalid=0 send_seq=2252 receive_seq=2252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999350  heater_bed: target=60 temp=60.0 pwm=0.330 raspberry_pi: temp=39.7 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.22 cputime=192.707 memavail=698996 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2520.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=260913 bytes_read=649844 bytes_retransmit=0 bytes_invalid=0 send_seq=13688 receive_seq=13688 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001502 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13672 bytes_read=44005 bytes_retransmit=0 bytes_invalid=0 send_seq=2253 receive_seq=2253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999342  heater_bed: target=60 temp=60.0 pwm=0.330 raspberry_pi: temp=40.2 mcu_temp: temp=34.5 chamber: temp=20.5 sysload=1.22 cputime=192.822 memavail=699000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2521.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=261098 bytes_read=650267 bytes_retransmit=0 bytes_invalid=0 send_seq=13700 receive_seq=13699 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13678 bytes_read=44021 bytes_retransmit=0 bytes_invalid=0 send_seq=2254 receive_seq=2254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999337  heater_bed: target=60 temp=60.0 pwm=0.330 raspberry_pi: temp=40.2 mcu_temp: temp=34.5 chamber: temp=20.5 sysload=1.20 cputime=192.936 memavail=699000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2522.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=261287 bytes_read=650759 bytes_retransmit=0 bytes_invalid=0 send_seq=13713 receive_seq=13712 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13684 bytes_read=44050 bytes_retransmit=0 bytes_invalid=0 send_seq=2255 receive_seq=2255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999317  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=40.2 mcu_temp: temp=34.4 chamber: temp=20.4 sysload=1.20 cputime=193.054 memavail=699000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.4 pwm=0.000
Stats 2523.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=261466 bytes_read=651202 bytes_retransmit=0 bytes_invalid=0 send_seq=13725 receive_seq=13724 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001498 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13690 bytes_read=44066 bytes_retransmit=0 bytes_invalid=0 send_seq=2256 receive_seq=2256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999275  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.5 sysload=1.20 cputime=193.168 memavail=699020 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2524.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=261709 bytes_read=651635 bytes_retransmit=0 bytes_invalid=0 send_seq=13738 receive_seq=13737 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13696 bytes_read=44082 bytes_retransmit=0 bytes_invalid=0 send_seq=2257 receive_seq=2257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999215  heater_bed: target=60 temp=60.1 pwm=0.275 raspberry_pi: temp=39.7 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.20 cputime=193.288 memavail=699272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2525.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=261948 bytes_read=652132 bytes_retransmit=0 bytes_invalid=0 send_seq=13754 receive_seq=13754 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001502 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13702 bytes_read=44098 bytes_retransmit=0 bytes_invalid=0 send_seq=2258 receive_seq=2258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999173  heater_bed: target=60 temp=60.2 pwm=0.203 raspberry_pi: temp=40.2 mcu_temp: temp=34.3 chamber: temp=20.5 sysload=1.20 cputime=193.411 memavail=699272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2526.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=262178 bytes_read=652585 bytes_retransmit=0 bytes_invalid=0 send_seq=13768 receive_seq=13768 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001501 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13708 bytes_read=44114 bytes_retransmit=0 bytes_invalid=0 send_seq=2259 receive_seq=2259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999215  heater_bed: target=60 temp=60.2 pwm=0.203 raspberry_pi: temp=40.8 mcu_temp: temp=34.3 chamber: temp=20.6 sysload=1.18 cputime=193.518 memavail=699272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2527.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=262476 bytes_read=653048 bytes_retransmit=0 bytes_invalid=0 send_seq=13784 receive_seq=13784 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001501 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13714 bytes_read=44143 bytes_retransmit=0 bytes_invalid=0 send_seq=2260 receive_seq=2260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999229  heater_bed: target=60 temp=60.2 pwm=0.264 raspberry_pi: temp=39.7 mcu_temp: temp=34.3 chamber: temp=20.6 sysload=1.18 cputime=193.638 memavail=699272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2528.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=262655 bytes_read=653508 bytes_retransmit=0 bytes_invalid=0 send_seq=13796 receive_seq=13796 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001499 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13720 bytes_read=44159 bytes_retransmit=0 bytes_invalid=0 send_seq=2261 receive_seq=2261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999259  heater_bed: target=60 temp=60.2 pwm=0.264 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.6 sysload=1.18 cputime=193.748 memavail=699272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2529.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=262834 bytes_read=653941 bytes_retransmit=0 bytes_invalid=0 send_seq=13808 receive_seq=13808 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13726 bytes_read=44175 bytes_retransmit=0 bytes_invalid=0 send_seq=2262 receive_seq=2262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999271  heater_bed: target=60 temp=60.2 pwm=0.264 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.5 sysload=1.18 cputime=193.859 memavail=699168 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2530.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=263062 bytes_read=654374 bytes_retransmit=0 bytes_invalid=0 send_seq=13821 receive_seq=13821 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001493 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13732 bytes_read=44191 bytes_retransmit=0 bytes_invalid=0 send_seq=2263 receive_seq=2263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999343  heater_bed: target=60 temp=60.2 pwm=0.264 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.7 sysload=1.18 cputime=193.981 memavail=699284 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2531.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=263257 bytes_read=654851 bytes_retransmit=0 bytes_invalid=0 send_seq=13834 receive_seq=13834 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001488 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13738 bytes_read=44207 bytes_retransmit=0 bytes_invalid=0 send_seq=2264 receive_seq=2264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999356  heater_bed: target=60 temp=60.2 pwm=0.291 raspberry_pi: temp=40.8 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=1.17 cputime=194.103 memavail=699284 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2532.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=263490 bytes_read=655319 bytes_retransmit=0 bytes_invalid=0 send_seq=13848 receive_seq=13848 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001486 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13744 bytes_read=44236 bytes_retransmit=0 bytes_invalid=0 send_seq=2265 receive_seq=2265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999289  heater_bed: target=60 temp=60.2 pwm=0.291 raspberry_pi: temp=40.8 mcu_temp: temp=34.5 chamber: temp=20.6 sysload=1.17 cputime=194.220 memavail=699276 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2533.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=263723 bytes_read=655757 bytes_retransmit=0 bytes_invalid=0 send_seq=13862 receive_seq=13862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001490 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13750 bytes_read=44252 bytes_retransmit=0 bytes_invalid=0 send_seq=2266 receive_seq=2266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999322  heater_bed: target=60 temp=60.1 pwm=0.291 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=1.17 cputime=194.338 memavail=699284 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2534.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=263983 bytes_read=656244 bytes_retransmit=0 bytes_invalid=0 send_seq=13877 receive_seq=13877 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001487 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13756 bytes_read=44268 bytes_retransmit=0 bytes_invalid=0 send_seq=2267 receive_seq=2267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999300  heater_bed: target=60 temp=60.1 pwm=0.308 raspberry_pi: temp=40.2 mcu_temp: temp=34.4 chamber: temp=20.6 sysload=1.17 cputime=194.449 memavail=699016 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2535.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=264162 bytes_read=656687 bytes_retransmit=0 bytes_invalid=0 send_seq=13889 receive_seq=13889 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001483 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13762 bytes_read=44284 bytes_retransmit=0 bytes_invalid=0 send_seq=2268 receive_seq=2268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999285  heater_bed: target=60 temp=60.1 pwm=0.308 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.7 sysload=1.17 cputime=194.557 memavail=699004 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2536.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=264341 bytes_read=657130 bytes_retransmit=0 bytes_invalid=0 send_seq=13901 receive_seq=13901 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001477 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13768 bytes_read=44300 bytes_retransmit=0 bytes_invalid=0 send_seq=2269 receive_seq=2269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999305  heater_bed: target=60 temp=60.1 pwm=0.308 raspberry_pi: temp=39.7 mcu_temp: temp=34.4 chamber: temp=20.5 sysload=1.07 cputime=194.670 memavail=699044 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2537.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=264542 bytes_read=657607 bytes_retransmit=0 bytes_invalid=0 send_seq=13915 receive_seq=13914 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001475 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13774 bytes_read=44329 bytes_retransmit=0 bytes_invalid=0 send_seq=2270 receive_seq=2270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999298  heater_bed: target=60 temp=60.1 pwm=0.242 raspberry_pi: temp=40.2 mcu_temp: temp=34.6 chamber: temp=20.7 sysload=1.07 cputime=194.786 memavail=699044 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2538.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=264721 bytes_read=658066 bytes_retransmit=0 bytes_invalid=0 send_seq=13927 receive_seq=13927 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001478 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13780 bytes_read=44345 bytes_retransmit=0 bytes_invalid=0 send_seq=2271 receive_seq=2271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999251  heater_bed: target=60 temp=60.2 pwm=0.242 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.6 sysload=1.07 cputime=194.897 memavail=698940 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2539.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=264900 bytes_read=658494 bytes_retransmit=0 bytes_invalid=0 send_seq=13939 receive_seq=13939 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001478 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13786 bytes_read=44361 bytes_retransmit=0 bytes_invalid=0 send_seq=2272 receive_seq=2272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999280  heater_bed: target=60 temp=60.2 pwm=0.242 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.6 sysload=1.07 cputime=195.009 memavail=699060 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2540.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=265079 bytes_read=658966 bytes_retransmit=0 bytes_invalid=0 send_seq=13951 receive_seq=13951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001475 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13792 bytes_read=44377 bytes_retransmit=0 bytes_invalid=0 send_seq=2273 receive_seq=2273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999274  heater_bed: target=60 temp=60.2 pwm=0.242 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=1.07 cputime=195.119 memavail=699076 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2541.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=265274 bytes_read=659414 bytes_retransmit=0 bytes_invalid=0 send_seq=13964 receive_seq=13964 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001471 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13798 bytes_read=44393 bytes_retransmit=0 bytes_invalid=0 send_seq=2274 receive_seq=2274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999266  heater_bed: target=60 temp=60.2 pwm=0.221 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=0.99 cputime=195.234 memavail=698972 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2542.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=265453 bytes_read=659857 bytes_retransmit=0 bytes_invalid=0 send_seq=13976 receive_seq=13976 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001472 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13804 bytes_read=44421 bytes_retransmit=0 bytes_invalid=0 send_seq=2275 receive_seq=2275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999284  heater_bed: target=60 temp=60.2 pwm=0.221 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.6 sysload=0.99 cputime=195.354 memavail=699080 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2543.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=265648 bytes_read=660334 bytes_retransmit=0 bytes_invalid=0 send_seq=13989 receive_seq=13989 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001471 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13810 bytes_read=44436 bytes_retransmit=0 bytes_invalid=0 send_seq=2276 receive_seq=2276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999267  heater_bed: target=60 temp=60.2 pwm=0.272 raspberry_pi: temp=40.2 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=0.99 cputime=195.470 memavail=699080 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2544.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=265827 bytes_read=660777 bytes_retransmit=0 bytes_invalid=0 send_seq=14001 receive_seq=14001 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001471 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13816 bytes_read=44451 bytes_retransmit=0 bytes_invalid=0 send_seq=2277 receive_seq=2277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999301  heater_bed: target=60 temp=60.2 pwm=0.272 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.7 sysload=0.99 cputime=195.587 memavail=698832 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2545.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=266006 bytes_read=661220 bytes_retransmit=0 bytes_invalid=0 send_seq=14013 receive_seq=14013 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001471 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13822 bytes_read=44466 bytes_retransmit=0 bytes_invalid=0 send_seq=2278 receive_seq=2278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999277  heater_bed: target=60 temp=60.1 pwm=0.272 raspberry_pi: temp=40.2 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.99 cputime=195.705 memavail=698832 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2546.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=266185 bytes_read=661692 bytes_retransmit=0 bytes_invalid=0 send_seq=14025 receive_seq=14025 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13828 bytes_read=44481 bytes_retransmit=0 bytes_invalid=0 send_seq=2279 receive_seq=2279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999261  heater_bed: target=60 temp=60.1 pwm=0.272 raspberry_pi: temp=40.8 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.91 cputime=195.822 memavail=698832 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.5 pwm=0.000
Stats 2547.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=266380 bytes_read=662140 bytes_retransmit=0 bytes_invalid=0 send_seq=14038 receive_seq=14038 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=13834 bytes_read=44510 bytes_retransmit=0 bytes_invalid=0 send_seq=2280 receive_seq=2280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999294  heater_bed: target=60 temp=60.1 pwm=0.290 raspberry_pi: temp=39.7 mcu_temp: temp=34.5 chamber: temp=20.7 sysload=0.91 cputime=195.941 memavail=699336 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2548.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=266559 bytes_read=662583 bytes_retransmit=0 bytes_invalid=0 send_seq=14050 receive_seq=14050 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001466 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=13840 bytes_read=44526 bytes_retransmit=0 bytes_invalid=0 send_seq=2281 receive_seq=2281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999233  heater_bed: target=60 temp=60.1 pwm=0.290 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.8 sysload=0.91 cputime=196.053 memavail=699336 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2549.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=266738 bytes_read=663055 bytes_retransmit=0 bytes_invalid=0 send_seq=14062 receive_seq=14062 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=13846 bytes_read=44542 bytes_retransmit=0 bytes_invalid=0 send_seq=2282 receive_seq=2282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999238  heater_bed: target=60 temp=60.0 pwm=0.290 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=0.91 cputime=196.164 memavail=699336 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2550.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=266917 bytes_read=663483 bytes_retransmit=0 bytes_invalid=0 send_seq=14074 receive_seq=14074 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=13852 bytes_read=44558 bytes_retransmit=0 bytes_invalid=0 send_seq=2283 receive_seq=2283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999197  heater_bed: target=60 temp=60.0 pwm=0.290 raspberry_pi: temp=40.2 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.91 cputime=196.275 memavail=699332 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2551.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=267112 bytes_read=663931 bytes_retransmit=0 bytes_invalid=0 send_seq=14087 receive_seq=14087 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001471 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=13858 bytes_read=44574 bytes_retransmit=0 bytes_invalid=0 send_seq=2284 receive_seq=2284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999164  heater_bed: target=60 temp=60.0 pwm=0.274 raspberry_pi: temp=40.2 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=0.84 cputime=196.391 memavail=699348 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2552.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=267307 bytes_read=664410 bytes_retransmit=0 bytes_invalid=0 send_seq=14100 receive_seq=14100 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13864 bytes_read=44603 bytes_retransmit=0 bytes_invalid=0 send_seq=2285 receive_seq=2285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999128  heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=40.2 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.84 cputime=196.507 memavail=699348 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2553.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=267502 bytes_read=664834 bytes_retransmit=0 bytes_invalid=0 send_seq=14113 receive_seq=14113 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13870 bytes_read=44619 bytes_retransmit=0 bytes_invalid=0 send_seq=2286 receive_seq=2286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999142  heater_bed: target=60 temp=60.0 pwm=0.273 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.84 cputime=196.622 memavail=699096 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2554.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=267697 bytes_read=665296 bytes_retransmit=0 bytes_invalid=0 send_seq=14126 receive_seq=14126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001463 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13876 bytes_read=44635 bytes_retransmit=0 bytes_invalid=0 send_seq=2287 receive_seq=2287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999154  heater_bed: target=60 temp=60.0 pwm=0.287 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.6 sysload=0.84 cputime=196.732 memavail=699360 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.6 pwm=0.000
Stats 2555.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=267887 bytes_read=665754 bytes_retransmit=0 bytes_invalid=0 send_seq=14138 receive_seq=14138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001462 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13882 bytes_read=44651 bytes_retransmit=0 bytes_invalid=0 send_seq=2288 receive_seq=2288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999176  heater_bed: target=60 temp=60.1 pwm=0.287 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.6 sysload=0.84 cputime=196.845 memavail=699360 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2556.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=268082 bytes_read=666187 bytes_retransmit=0 bytes_invalid=0 send_seq=14151 receive_seq=14151 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=13888 bytes_read=44667 bytes_retransmit=0 bytes_invalid=0 send_seq=2289 receive_seq=2289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999171  heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.7 sysload=0.77 cputime=196.965 memavail=698972 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2557.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=268261 bytes_read=666674 bytes_retransmit=0 bytes_invalid=0 send_seq=14163 receive_seq=14163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001458 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13894 bytes_read=44696 bytes_retransmit=0 bytes_invalid=0 send_seq=2290 receive_seq=2290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999187  heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.6 sysload=0.77 cputime=197.084 memavail=699108 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2558.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=268440 bytes_read=667117 bytes_retransmit=0 bytes_invalid=0 send_seq=14175 receive_seq=14175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001455 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13900 bytes_read=44712 bytes_retransmit=0 bytes_invalid=0 send_seq=2291 receive_seq=2291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999279  heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.77 cputime=197.200 memavail=699108 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2559.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=268619 bytes_read=667545 bytes_retransmit=0 bytes_invalid=0 send_seq=14187 receive_seq=14187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13906 bytes_read=44728 bytes_retransmit=0 bytes_invalid=0 send_seq=2292 receive_seq=2292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999265  heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.6 sysload=0.77 cputime=197.315 memavail=699120 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2560.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=268822 bytes_read=668022 bytes_retransmit=0 bytes_invalid=0 send_seq=14201 receive_seq=14200 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001462 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13912 bytes_read=44744 bytes_retransmit=0 bytes_invalid=0 send_seq=2293 receive_seq=2293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999224  heater_bed: target=60 temp=60.1 pwm=0.276 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.6 sysload=0.77 cputime=197.439 memavail=699120 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2561.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=269001 bytes_read=668465 bytes_retransmit=0 bytes_invalid=0 send_seq=14213 receive_seq=14212 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001461 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=13918 bytes_read=44760 bytes_retransmit=0 bytes_invalid=0 send_seq=2294 receive_seq=2294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999222  heater_bed: target=60 temp=60.1 pwm=0.276 raspberry_pi: temp=39.7 mcu_temp: temp=34.6 chamber: temp=20.6 sysload=0.71 cputime=197.546 memavail=699120 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2562.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=269172 bytes_read=668908 bytes_retransmit=0 bytes_invalid=0 send_seq=14224 receive_seq=14224 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001464 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13924 bytes_read=44789 bytes_retransmit=0 bytes_invalid=0 send_seq=2295 receive_seq=2295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999197  heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.6 sysload=0.71 cputime=197.649 memavail=699120 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2563.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=269351 bytes_read=669380 bytes_retransmit=0 bytes_invalid=0 send_seq=14236 receive_seq=14236 retransmit_seq=0 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13930 bytes_read=44805 bytes_retransmit=0 bytes_invalid=0 send_seq=2296 receive_seq=2296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999249  heater_bed: target=60 temp=60.0 pwm=0.276 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.7 sysload=0.71 cputime=197.766 memavail=699120 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2564.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=269546 bytes_read=669828 bytes_retransmit=0 bytes_invalid=0 send_seq=14249 receive_seq=14249 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001469 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13936 bytes_read=44821 bytes_retransmit=0 bytes_invalid=0 send_seq=2297 receive_seq=2297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999242  heater_bed: target=60 temp=60.0 pwm=0.299 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.6 sysload=0.71 cputime=197.878 memavail=698568 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2565.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=269757 bytes_read=670266 bytes_retransmit=0 bytes_invalid=0 send_seq=14263 receive_seq=14263 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001471 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13942 bytes_read=44837 bytes_retransmit=0 bytes_invalid=0 send_seq=2298 receive_seq=2298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999200  heater_bed: target=60 temp=60.0 pwm=0.301 raspberry_pi: temp=39.7 mcu_temp: temp=34.7 chamber: temp=20.7 sysload=0.71 cputime=197.998 memavail=698612 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2566.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=269952 bytes_read=670743 bytes_retransmit=0 bytes_invalid=0 send_seq=14276 receive_seq=14276 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001474 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=13948 bytes_read=44853 bytes_retransmit=0 bytes_invalid=0 send_seq=2299 receive_seq=2299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999174  heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.7 sysload=0.65 cputime=198.112 memavail=698628 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2567.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=270131 bytes_read=671201 bytes_retransmit=0 bytes_invalid=0 send_seq=14288 receive_seq=14288 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001472 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13954 bytes_read=44882 bytes_retransmit=0 bytes_invalid=0 send_seq=2300 receive_seq=2300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999163  heater_bed: target=60 temp=60.0 pwm=0.237 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.7 sysload=0.65 cputime=198.230 memavail=698636 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2568.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=270310 bytes_read=671629 bytes_retransmit=0 bytes_invalid=0 send_seq=14300 receive_seq=14300 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13960 bytes_read=44898 bytes_retransmit=0 bytes_invalid=0 send_seq=2301 receive_seq=2301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999177  heater_bed: target=60 temp=60.1 pwm=0.237 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.6 sysload=0.65 cputime=198.339 memavail=698636 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2569.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=270521 bytes_read=672111 bytes_retransmit=0 bytes_invalid=0 send_seq=14314 receive_seq=14314 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001464 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13966 bytes_read=44914 bytes_retransmit=0 bytes_invalid=0 send_seq=2302 receive_seq=2302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999198  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.7 sysload=0.65 cputime=198.452 memavail=697800 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.7 pwm=0.000
Stats 2570.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=270713 bytes_read=672564 bytes_retransmit=0 bytes_invalid=0 send_seq=14328 receive_seq=14328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001457 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13978 bytes_read=44946 bytes_retransmit=0 bytes_invalid=0 send_seq=2304 receive_seq=2304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999221  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=35.0 chamber: temp=20.7 sysload=0.60 cputime=198.538 memavail=698904 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2571.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=270892 bytes_read=673007 bytes_retransmit=0 bytes_invalid=0 send_seq=14340 receive_seq=14340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001455 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=13984 bytes_read=44962 bytes_retransmit=0 bytes_invalid=0 send_seq=2305 receive_seq=2305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999301  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=40.2 mcu_temp: temp=35.0 chamber: temp=20.7 sysload=0.60 cputime=198.650 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2572.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=271071 bytes_read=673474 bytes_retransmit=0 bytes_invalid=0 send_seq=14352 receive_seq=14351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001450 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=13990 bytes_read=44991 bytes_retransmit=0 bytes_invalid=0 send_seq=2306 receive_seq=2306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999330  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=40.2 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.60 cputime=198.760 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2573.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=271266 bytes_read=673927 bytes_retransmit=0 bytes_invalid=0 send_seq=14365 receive_seq=14365 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001447 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=13996 bytes_read=45007 bytes_retransmit=0 bytes_invalid=0 send_seq=2307 receive_seq=2307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999329  heater_bed: target=60 temp=60.1 pwm=0.246 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.7 sysload=0.60 cputime=198.872 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2574.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=271445 bytes_read=674370 bytes_retransmit=0 bytes_invalid=0 send_seq=14377 receive_seq=14377 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001443 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14002 bytes_read=45023 bytes_retransmit=0 bytes_invalid=0 send_seq=2308 receive_seq=2308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999333  heater_bed: target=60 temp=60.1 pwm=0.246 raspberry_pi: temp=40.8 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.60 cputime=198.988 memavail=698656 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2575.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=271629 bytes_read=674843 bytes_retransmit=0 bytes_invalid=0 send_seq=14390 receive_seq=14390 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001443 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14008 bytes_read=45039 bytes_retransmit=0 bytes_invalid=0 send_seq=2309 receive_seq=2309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999299  heater_bed: target=60 temp=60.1 pwm=0.246 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.8 sysload=0.55 cputime=199.103 memavail=698656 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2576.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=271813 bytes_read=675258 bytes_retransmit=0 bytes_invalid=0 send_seq=14403 receive_seq=14402 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001434 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14014 bytes_read=45055 bytes_retransmit=0 bytes_invalid=0 send_seq=2310 receive_seq=2310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999274  heater_bed: target=60 temp=60.1 pwm=0.246 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.55 cputime=199.216 memavail=698656 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2577.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=272013 bytes_read=675726 bytes_retransmit=0 bytes_invalid=0 send_seq=14417 receive_seq=14417 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14020 bytes_read=45084 bytes_retransmit=0 bytes_invalid=0 send_seq=2311 receive_seq=2311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999301  heater_bed: target=60 temp=60.1 pwm=0.248 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.6 sysload=0.55 cputime=199.328 memavail=698600 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2578.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=272224 bytes_read=676203 bytes_retransmit=0 bytes_invalid=0 send_seq=14431 receive_seq=14430 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001426 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14026 bytes_read=45100 bytes_retransmit=0 bytes_invalid=0 send_seq=2312 receive_seq=2312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999279  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.6 sysload=0.55 cputime=199.443 memavail=698648 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2579.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=272403 bytes_read=676636 bytes_retransmit=0 bytes_invalid=0 send_seq=14443 receive_seq=14443 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001431 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14032 bytes_read=45116 bytes_retransmit=0 bytes_invalid=0 send_seq=2313 receive_seq=2313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999348  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.6 sysload=0.55 cputime=199.554 memavail=698648 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2580.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=272574 bytes_read=677074 bytes_retransmit=0 bytes_invalid=0 send_seq=14454 receive_seq=14454 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14038 bytes_read=45132 bytes_retransmit=0 bytes_invalid=0 send_seq=2314 receive_seq=2314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999272  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.50 cputime=199.660 memavail=698732 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2581.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=272753 bytes_read=677546 bytes_retransmit=0 bytes_invalid=0 send_seq=14466 receive_seq=14466 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001432 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14044 bytes_read=45148 bytes_retransmit=0 bytes_invalid=0 send_seq=2315 receive_seq=2315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999245  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=40.2 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.50 cputime=199.770 memavail=698732 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2582.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=272948 bytes_read=677994 bytes_retransmit=0 bytes_invalid=0 send_seq=14479 receive_seq=14479 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14050 bytes_read=45177 bytes_retransmit=0 bytes_invalid=0 send_seq=2316 receive_seq=2316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999244  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.8 sysload=0.50 cputime=199.886 memavail=698912 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2583.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=273127 bytes_read=678437 bytes_retransmit=0 bytes_invalid=0 send_seq=14491 receive_seq=14491 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14056 bytes_read=45193 bytes_retransmit=0 bytes_invalid=0 send_seq=2317 receive_seq=2317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999266  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.7 mcu_temp: temp=35.0 chamber: temp=20.7 sysload=0.50 cputime=200.003 memavail=698660 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2584.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=273306 bytes_read=678909 bytes_retransmit=0 bytes_invalid=0 send_seq=14503 receive_seq=14503 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001428 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14062 bytes_read=45209 bytes_retransmit=0 bytes_invalid=0 send_seq=2318 receive_seq=2318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999280  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=39.2 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.50 cputime=200.122 memavail=699160 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2585.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=273485 bytes_read=679337 bytes_retransmit=0 bytes_invalid=0 send_seq=14515 receive_seq=14515 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001427 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14068 bytes_read=45225 bytes_retransmit=0 bytes_invalid=0 send_seq=2319 receive_seq=2319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999308  heater_bed: target=60 temp=60.1 pwm=0.247 raspberry_pi: temp=40.2 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.54 cputime=200.246 memavail=699160 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.8 pwm=0.000
Stats 2586.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=273664 bytes_read=679780 bytes_retransmit=0 bytes_invalid=0 send_seq=14527 receive_seq=14527 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001423 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14074 bytes_read=45241 bytes_retransmit=0 bytes_invalid=0 send_seq=2320 receive_seq=2320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999302  heater_bed: target=60 temp=60.2 pwm=0.200 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.7 sysload=0.54 cputime=200.361 memavail=699152 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2587.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=273865 bytes_read=680267 bytes_retransmit=0 bytes_invalid=0 send_seq=14539 receive_seq=14539 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001421 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=14080 bytes_read=45270 bytes_retransmit=0 bytes_invalid=0 send_seq=2321 receive_seq=2321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999284  heater_bed: target=60 temp=60.1 pwm=0.252 raspberry_pi: temp=40.2 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.54 cputime=200.484 memavail=699168 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2588.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=274044 bytes_read=680695 bytes_retransmit=0 bytes_invalid=0 send_seq=14551 receive_seq=14551 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001420 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=14086 bytes_read=45286 bytes_retransmit=0 bytes_invalid=0 send_seq=2322 receive_seq=2322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999290  heater_bed: target=60 temp=60.1 pwm=0.252 raspberry_pi: temp=39.7 mcu_temp: temp=34.8 chamber: temp=20.6 sysload=0.54 cputime=200.603 memavail=699168 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2589.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=274242 bytes_read=681172 bytes_retransmit=0 bytes_invalid=0 send_seq=14564 receive_seq=14564 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001418 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=14092 bytes_read=45302 bytes_retransmit=0 bytes_invalid=0 send_seq=2323 receive_seq=2323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999285  heater_bed: target=60 temp=60.2 pwm=0.194 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.8 sysload=0.54 cputime=200.739 memavail=699172 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2590.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=274421 bytes_read=681610 bytes_retransmit=0 bytes_invalid=0 send_seq=14576 receive_seq=14575 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001417 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=14098 bytes_read=45318 bytes_retransmit=0 bytes_invalid=0 send_seq=2324 receive_seq=2324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999260  heater_bed: target=60 temp=60.2 pwm=0.194 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.58 cputime=200.848 memavail=699172 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2591.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=274608 bytes_read=682043 bytes_retransmit=0 bytes_invalid=0 send_seq=14588 receive_seq=14588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001425 rpi: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000020 bytes_write=14104 bytes_read=45334 bytes_retransmit=0 bytes_invalid=0 send_seq=2325 receive_seq=2325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999215  heater_bed: target=60 temp=60.2 pwm=0.250 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.8 sysload=0.58 cputime=200.952 memavail=699172 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=24.9 pwm=0.000
Stats 2592.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=274793 bytes_read=682530 bytes_retransmit=0 bytes_invalid=0 send_seq=14601 receive_seq=14600 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14110 bytes_read=45363 bytes_retransmit=0 bytes_invalid=0 send_seq=2326 receive_seq=2326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999171  heater_bed: target=60 temp=60.1 pwm=0.250 raspberry_pi: temp=39.7 mcu_temp: temp=34.9 chamber: temp=20.8 sysload=0.58 cputime=201.070 memavail=698928 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2593.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=274972 bytes_read=682989 bytes_retransmit=0 bytes_invalid=0 send_seq=14613 receive_seq=14613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001434 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14116 bytes_read=45379 bytes_retransmit=0 bytes_invalid=0 send_seq=2327 receive_seq=2327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999113  heater_bed: target=60 temp=60.1 pwm=0.250 raspberry_pi: temp=39.7 mcu_temp: temp=35.0 chamber: temp=20.8 sysload=0.58 cputime=201.183 memavail=698928 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2594.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=275151 bytes_read=683417 bytes_retransmit=0 bytes_invalid=0 send_seq=14625 receive_seq=14625 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001434 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14122 bytes_read=45395 bytes_retransmit=0 bytes_invalid=0 send_seq=2328 receive_seq=2328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999123  heater_bed: target=60 temp=60.1 pwm=0.250 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.58 cputime=201.305 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2595.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=275346 bytes_read=683894 bytes_retransmit=0 bytes_invalid=0 send_seq=14638 receive_seq=14638 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001431 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14128 bytes_read=45411 bytes_retransmit=0 bytes_invalid=0 send_seq=2329 receive_seq=2329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999161  heater_bed: target=60 temp=60.2 pwm=0.229 raspberry_pi: temp=39.7 mcu_temp: temp=35.0 chamber: temp=20.7 sysload=0.62 cputime=201.425 memavail=698144 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2596.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=275525 bytes_read=684337 bytes_retransmit=0 bytes_invalid=0 send_seq=14650 receive_seq=14650 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001432 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14134 bytes_read=45427 bytes_retransmit=0 bytes_invalid=0 send_seq=2330 receive_seq=2330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999220  heater_bed: target=60 temp=60.1 pwm=0.229 raspberry_pi: temp=39.7 mcu_temp: temp=35.0 chamber: temp=20.7 sysload=0.62 cputime=201.537 memavail=698180 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2597.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=275712 bytes_read=684780 bytes_retransmit=0 bytes_invalid=0 send_seq=14663 receive_seq=14662 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14140 bytes_read=45456 bytes_retransmit=0 bytes_invalid=0 send_seq=2331 receive_seq=2331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999229  heater_bed: target=60 temp=60.1 pwm=0.229 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.7 sysload=0.62 cputime=201.665 memavail=698180 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2598.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=275953 bytes_read=685272 bytes_retransmit=0 bytes_invalid=0 send_seq=14678 receive_seq=14678 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14146 bytes_read=45472 bytes_retransmit=0 bytes_invalid=0 send_seq=2332 receive_seq=2332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999260  heater_bed: target=60 temp=60.1 pwm=0.232 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.62 cputime=201.777 memavail=698440 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2599.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=276153 bytes_read=685721 bytes_retransmit=0 bytes_invalid=0 send_seq=14692 receive_seq=14692 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001428 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14152 bytes_read=45488 bytes_retransmit=0 bytes_invalid=0 send_seq=2333 receive_seq=2333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999367  heater_bed: target=60 temp=60.2 pwm=0.171 raspberry_pi: temp=39.7 mcu_temp: temp=35.0 chamber: temp=20.7 sysload=0.62 cputime=201.898 memavail=698440 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2600.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=276353 bytes_read=686146 bytes_retransmit=0 bytes_invalid=0 send_seq=14706 receive_seq=14706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001426 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14158 bytes_read=45504 bytes_retransmit=0 bytes_invalid=0 send_seq=2334 receive_seq=2334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999368  heater_bed: target=60 temp=60.2 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.65 cputime=202.017 memavail=698440 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.0 pwm=0.000
Stats 2601.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=276537 bytes_read=686619 bytes_retransmit=0 bytes_invalid=0 send_seq=14719 receive_seq=14719 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14164 bytes_read=45520 bytes_retransmit=0 bytes_invalid=0 send_seq=2335 receive_seq=2335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999332  heater_bed: target=60 temp=60.2 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.8 sysload=0.65 cputime=202.137 memavail=698444 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2602.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=276721 bytes_read=687082 bytes_retransmit=0 bytes_invalid=0 send_seq=14732 receive_seq=14732 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001427 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=14170 bytes_read=45549 bytes_retransmit=0 bytes_invalid=0 send_seq=2336 receive_seq=2336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999317  heater_bed: target=60 temp=60.2 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.8 sysload=0.65 cputime=202.256 memavail=698444 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2603.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=276905 bytes_read=687530 bytes_retransmit=0 bytes_invalid=0 send_seq=14745 receive_seq=14745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001427 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=14176 bytes_read=45565 bytes_retransmit=0 bytes_invalid=0 send_seq=2337 receive_seq=2337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999292  heater_bed: target=60 temp=60.2 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.9 sysload=0.65 cputime=202.374 memavail=698444 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2604.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=277121 bytes_read=688017 bytes_retransmit=0 bytes_invalid=0 send_seq=14760 receive_seq=14760 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001431 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=14182 bytes_read=45581 bytes_retransmit=0 bytes_invalid=0 send_seq=2338 receive_seq=2338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999261  heater_bed: target=60 temp=60.2 pwm=0.170 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.65 cputime=202.485 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2605.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=277305 bytes_read=688450 bytes_retransmit=0 bytes_invalid=0 send_seq=14773 receive_seq=14773 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001433 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=14188 bytes_read=45597 bytes_retransmit=0 bytes_invalid=0 send_seq=2339 receive_seq=2339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999248  heater_bed: target=60 temp=60.2 pwm=0.170 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.67 cputime=202.603 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2606.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=277505 bytes_read=688918 bytes_retransmit=0 bytes_invalid=0 send_seq=14787 receive_seq=14787 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=14194 bytes_read=45613 bytes_retransmit=0 bytes_invalid=0 send_seq=2340 receive_seq=2340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999200  heater_bed: target=60 temp=60.2 pwm=0.224 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.8 sysload=0.67 cputime=202.727 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2607.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=277689 bytes_read=689395 bytes_retransmit=0 bytes_invalid=0 send_seq=14800 receive_seq=14800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001428 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=14200 bytes_read=45642 bytes_retransmit=0 bytes_invalid=0 send_seq=2341 receive_seq=2341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999217  heater_bed: target=60 temp=60.1 pwm=0.224 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.9 sysload=0.67 cputime=202.838 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2608.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=277900 bytes_read=689833 bytes_retransmit=0 bytes_invalid=0 send_seq=14814 receive_seq=14814 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001427 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=14206 bytes_read=45658 bytes_retransmit=0 bytes_invalid=0 send_seq=2342 receive_seq=2342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999218  heater_bed: target=60 temp=60.1 pwm=0.222 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.8 sysload=0.67 cputime=202.949 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2609.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=278084 bytes_read=690281 bytes_retransmit=0 bytes_invalid=0 send_seq=14827 receive_seq=14827 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001428 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=14212 bytes_read=45674 bytes_retransmit=0 bytes_invalid=0 send_seq=2343 receive_seq=2343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999193  heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.67 cputime=203.063 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2610.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=278279 bytes_read=690758 bytes_retransmit=0 bytes_invalid=0 send_seq=14840 receive_seq=14840 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001426 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=14218 bytes_read=45690 bytes_retransmit=0 bytes_invalid=0 send_seq=2344 receive_seq=2344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999192  heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.70 cputime=203.173 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2611.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=278463 bytes_read=691191 bytes_retransmit=0 bytes_invalid=0 send_seq=14853 receive_seq=14853 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001425 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=14224 bytes_read=45706 bytes_retransmit=0 bytes_invalid=0 send_seq=2345 receive_seq=2345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999186  heater_bed: target=60 temp=60.0 pwm=0.282 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.7 sysload=0.70 cputime=203.281 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.1 pwm=0.000
Stats 2612.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=278663 bytes_read=691659 bytes_retransmit=0 bytes_invalid=0 send_seq=14867 receive_seq=14867 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001424 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14230 bytes_read=45735 bytes_retransmit=0 bytes_invalid=0 send_seq=2346 receive_seq=2346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999266  heater_bed: target=60 temp=59.9 pwm=0.304 raspberry_pi: temp=39.2 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.70 cputime=203.392 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2613.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=278869 bytes_read=692136 bytes_retransmit=0 bytes_invalid=0 send_seq=14880 receive_seq=14880 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001420 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14236 bytes_read=45751 bytes_retransmit=0 bytes_invalid=0 send_seq=2347 receive_seq=2347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999275  heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.70 cputime=203.503 memavail=698216 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2614.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=279053 bytes_read=692569 bytes_retransmit=0 bytes_invalid=0 send_seq=14893 receive_seq=14893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001416 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14242 bytes_read=45767 bytes_retransmit=0 bytes_invalid=0 send_seq=2348 receive_seq=2348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999290  heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.70 cputime=203.623 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2615.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=279237 bytes_read=693031 bytes_retransmit=0 bytes_invalid=0 send_seq=14906 receive_seq=14906 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001412 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14248 bytes_read=45783 bytes_retransmit=0 bytes_invalid=0 send_seq=2349 receive_seq=2349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999274  heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.7 sysload=0.73 cputime=203.736 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2616.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=279416 bytes_read=693489 bytes_retransmit=0 bytes_invalid=0 send_seq=14918 receive_seq=14918 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001407 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14254 bytes_read=45799 bytes_retransmit=0 bytes_invalid=0 send_seq=2350 receive_seq=2350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999278  heater_bed: target=60 temp=60.0 pwm=0.218 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.7 sysload=0.73 cputime=203.846 memavail=698240 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2617.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=279616 bytes_read=693942 bytes_retransmit=0 bytes_invalid=0 send_seq=14932 receive_seq=14932 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14260 bytes_read=45828 bytes_retransmit=0 bytes_invalid=0 send_seq=2351 receive_seq=2351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999252  heater_bed: target=60 temp=60.0 pwm=0.229 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.7 sysload=0.73 cputime=203.963 memavail=698240 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2618.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=279795 bytes_read=694414 bytes_retransmit=0 bytes_invalid=0 send_seq=14944 receive_seq=14944 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14266 bytes_read=45844 bytes_retransmit=0 bytes_invalid=0 send_seq=2352 receive_seq=2352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999257  heater_bed: target=60 temp=60.1 pwm=0.229 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.7 sysload=0.73 cputime=204.088 memavail=698240 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2619.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=279995 bytes_read=694867 bytes_retransmit=0 bytes_invalid=0 send_seq=14958 receive_seq=14958 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001403 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14272 bytes_read=45860 bytes_retransmit=0 bytes_invalid=0 send_seq=2353 receive_seq=2353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999213  heater_bed: target=60 temp=60.1 pwm=0.155 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.7 sysload=0.73 cputime=204.199 memavail=698000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2620.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=280190 bytes_read=695300 bytes_retransmit=0 bytes_invalid=0 send_seq=14971 receive_seq=14971 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001404 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14278 bytes_read=45876 bytes_retransmit=0 bytes_invalid=0 send_seq=2354 receive_seq=2354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999193  heater_bed: target=60 temp=60.1 pwm=0.222 raspberry_pi: temp=40.2 mcu_temp: temp=35.3 chamber: temp=20.7 sysload=0.75 cputime=204.321 memavail=698000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2621.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=280374 bytes_read=695777 bytes_retransmit=0 bytes_invalid=0 send_seq=14984 receive_seq=14984 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001404 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14284 bytes_read=45892 bytes_retransmit=0 bytes_invalid=0 send_seq=2355 receive_seq=2355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999204  heater_bed: target=60 temp=60.1 pwm=0.222 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.7 sysload=0.75 cputime=204.440 memavail=698000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2622.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=280558 bytes_read=696240 bytes_retransmit=0 bytes_invalid=0 send_seq=14997 receive_seq=14997 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001406 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14290 bytes_read=45921 bytes_retransmit=0 bytes_invalid=0 send_seq=2356 receive_seq=2356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999235  heater_bed: target=60 temp=60.1 pwm=0.222 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.7 sysload=0.75 cputime=204.550 memavail=698000 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2623.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=280742 bytes_read=696666 bytes_retransmit=0 bytes_invalid=0 send_seq=15010 receive_seq=15010 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001404 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14296 bytes_read=45937 bytes_retransmit=0 bytes_invalid=0 send_seq=2357 receive_seq=2357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999212  heater_bed: target=60 temp=60.1 pwm=0.222 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.8 sysload=0.75 cputime=204.662 memavail=697992 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2624.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=280942 bytes_read=697134 bytes_retransmit=0 bytes_invalid=0 send_seq=15024 receive_seq=15024 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14308 bytes_read=45969 bytes_retransmit=0 bytes_invalid=0 send_seq=2359 receive_seq=2359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999242  heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.8 sysload=0.75 cputime=204.778 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2625.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=281126 bytes_read=697582 bytes_retransmit=0 bytes_invalid=0 send_seq=15037 receive_seq=15037 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001398 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14314 bytes_read=45985 bytes_retransmit=0 bytes_invalid=0 send_seq=2360 receive_seq=2360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999353  heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.8 sysload=0.77 cputime=204.892 memavail=698256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2626.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=281310 bytes_read=698030 bytes_retransmit=0 bytes_invalid=0 send_seq=15050 receive_seq=15050 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001397 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14320 bytes_read=46001 bytes_retransmit=0 bytes_invalid=0 send_seq=2361 receive_seq=2361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999344  heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.77 cputime=205.002 memavail=698256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.2 pwm=0.000
Stats 2627.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=281494 bytes_read=698507 bytes_retransmit=0 bytes_invalid=0 send_seq=15063 receive_seq=15063 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14326 bytes_read=46029 bytes_retransmit=0 bytes_invalid=0 send_seq=2362 receive_seq=2362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999360  heater_bed: target=60 temp=60.0 pwm=0.281 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.8 sysload=0.77 cputime=205.117 memavail=698256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2628.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=281689 bytes_read=698955 bytes_retransmit=0 bytes_invalid=0 send_seq=15076 receive_seq=15076 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001394 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14332 bytes_read=46044 bytes_retransmit=0 bytes_invalid=0 send_seq=2363 receive_seq=2363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999336  heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.77 cputime=205.235 memavail=698152 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2629.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=281873 bytes_read=699388 bytes_retransmit=0 bytes_invalid=0 send_seq=15089 receive_seq=15089 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14338 bytes_read=46059 bytes_retransmit=0 bytes_invalid=0 send_seq=2364 receive_seq=2364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999326  heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.77 cputime=205.345 memavail=698256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2630.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=282057 bytes_read=699865 bytes_retransmit=0 bytes_invalid=0 send_seq=15102 receive_seq=15102 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14344 bytes_read=46074 bytes_retransmit=0 bytes_invalid=0 send_seq=2365 receive_seq=2365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999298  heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=39.2 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.79 cputime=205.457 memavail=698256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2631.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=282241 bytes_read=700313 bytes_retransmit=0 bytes_invalid=0 send_seq=15115 receive_seq=15115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=14350 bytes_read=46089 bytes_retransmit=0 bytes_invalid=0 send_seq=2366 receive_seq=2366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999284  heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.79 cputime=205.569 memavail=697764 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2632.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=282441 bytes_read=700781 bytes_retransmit=0 bytes_invalid=0 send_seq=15129 receive_seq=15129 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14356 bytes_read=46117 bytes_retransmit=0 bytes_invalid=0 send_seq=2367 receive_seq=2367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999311  heater_bed: target=60 temp=60.1 pwm=0.185 raspberry_pi: temp=39.7 mcu_temp: temp=35.1 chamber: temp=20.8 sysload=0.79 cputime=205.679 memavail=697764 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2633.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=282625 bytes_read=701258 bytes_retransmit=0 bytes_invalid=0 send_seq=15142 receive_seq=15142 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14362 bytes_read=46133 bytes_retransmit=0 bytes_invalid=0 send_seq=2368 receive_seq=2368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999273  heater_bed: target=60 temp=60.1 pwm=0.185 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.9 sysload=0.79 cputime=205.793 memavail=697764 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2634.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=282809 bytes_read=701691 bytes_retransmit=0 bytes_invalid=0 send_seq=15155 receive_seq=15155 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14368 bytes_read=46149 bytes_retransmit=0 bytes_invalid=0 send_seq=2369 receive_seq=2369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999263  heater_bed: target=60 temp=60.1 pwm=0.185 raspberry_pi: temp=40.2 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.79 cputime=205.906 memavail=698272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2635.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=282993 bytes_read=702139 bytes_retransmit=0 bytes_invalid=0 send_seq=15168 receive_seq=15168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14374 bytes_read=46165 bytes_retransmit=0 bytes_invalid=0 send_seq=2370 receive_seq=2370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999266  heater_bed: target=60 temp=60.1 pwm=0.185 raspberry_pi: temp=40.2 mcu_temp: temp=35.2 chamber: temp=20.9 sysload=0.80 cputime=206.017 memavail=698272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2636.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=283193 bytes_read=702621 bytes_retransmit=0 bytes_invalid=0 send_seq=15182 receive_seq=15182 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14380 bytes_read=46181 bytes_retransmit=0 bytes_invalid=0 send_seq=2371 receive_seq=2371 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999245  heater_bed: target=60 temp=60.2 pwm=0.192 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.6 sysload=0.80 cputime=206.128 memavail=698272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2637.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=283377 bytes_read=703069 bytes_retransmit=0 bytes_invalid=0 send_seq=15195 receive_seq=15195 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=14386 bytes_read=46210 bytes_retransmit=0 bytes_invalid=0 send_seq=2372 receive_seq=2372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999231  heater_bed: target=60 temp=60.2 pwm=0.192 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.80 cputime=206.238 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.3 pwm=0.000
Stats 2638.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=283561 bytes_read=703517 bytes_retransmit=0 bytes_invalid=0 send_seq=15208 receive_seq=15208 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=14392 bytes_read=46226 bytes_retransmit=0 bytes_invalid=0 send_seq=2373 receive_seq=2373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999264  heater_bed: target=60 temp=60.2 pwm=0.192 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.7 sysload=0.80 cputime=206.344 memavail=698524 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2639.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=283745 bytes_read=703994 bytes_retransmit=0 bytes_invalid=0 send_seq=15221 receive_seq=15221 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=14398 bytes_read=46242 bytes_retransmit=0 bytes_invalid=0 send_seq=2374 receive_seq=2374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999326  heater_bed: target=60 temp=60.2 pwm=0.192 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.80 cputime=206.444 memavail=698524 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2640.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=283945 bytes_read=704432 bytes_retransmit=0 bytes_invalid=0 send_seq=15235 receive_seq=15235 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=14404 bytes_read=46258 bytes_retransmit=0 bytes_invalid=0 send_seq=2375 receive_seq=2375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999324  heater_bed: target=60 temp=60.2 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.2 chamber: temp=20.8 sysload=0.90 cputime=206.557 memavail=698180 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2641.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=284129 bytes_read=704880 bytes_retransmit=0 bytes_invalid=0 send_seq=15248 receive_seq=15248 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=14410 bytes_read=46274 bytes_retransmit=0 bytes_invalid=0 send_seq=2376 receive_seq=2376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999301  heater_bed: target=60 temp=60.1 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.90 cputime=206.667 memavail=698284 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2642.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=284313 bytes_read=705372 bytes_retransmit=0 bytes_invalid=0 send_seq=15261 receive_seq=15261 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14416 bytes_read=46303 bytes_retransmit=0 bytes_invalid=0 send_seq=2377 receive_seq=2377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999290  heater_bed: target=60 temp=60.1 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.90 cputime=206.782 memavail=698284 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2643.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=284497 bytes_read=705805 bytes_retransmit=0 bytes_invalid=0 send_seq=15274 receive_seq=15274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14422 bytes_read=46319 bytes_retransmit=0 bytes_invalid=0 send_seq=2378 receive_seq=2378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999283  heater_bed: target=60 temp=60.1 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.9 sysload=0.90 cputime=206.896 memavail=698284 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2644.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=284681 bytes_read=706282 bytes_retransmit=0 bytes_invalid=0 send_seq=15287 receive_seq=15287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14428 bytes_read=46335 bytes_retransmit=0 bytes_invalid=0 send_seq=2379 receive_seq=2379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999263  heater_bed: target=60 temp=60.1 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.90 cputime=207.025 memavail=698296 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.4 pwm=0.000
Stats 2645.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=284887 bytes_read=706751 bytes_retransmit=0 bytes_invalid=0 send_seq=15302 receive_seq=15302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14434 bytes_read=46351 bytes_retransmit=0 bytes_invalid=0 send_seq=2380 receive_seq=2380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999243  heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.91 cputime=207.136 memavail=698296 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2646.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=285071 bytes_read=707184 bytes_retransmit=0 bytes_invalid=0 send_seq=15315 receive_seq=15315 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14440 bytes_read=46367 bytes_retransmit=0 bytes_invalid=0 send_seq=2381 receive_seq=2381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999213  heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.91 cputime=207.241 memavail=698044 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2647.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=285255 bytes_read=707664 bytes_retransmit=0 bytes_invalid=0 send_seq=15328 receive_seq=15328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14446 bytes_read=46383 bytes_retransmit=0 bytes_invalid=0 send_seq=2382 receive_seq=2382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999252  heater_bed: target=60 temp=60.0 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.91 cputime=207.351 memavail=698044 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2648.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=285450 bytes_read=708102 bytes_retransmit=0 bytes_invalid=0 send_seq=15341 receive_seq=15341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14452 bytes_read=46412 bytes_retransmit=0 bytes_invalid=0 send_seq=2383 receive_seq=2383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999256  heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.91 cputime=207.459 memavail=698044 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2649.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=285694 bytes_read=708545 bytes_retransmit=0 bytes_invalid=0 send_seq=15356 receive_seq=15356 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14458 bytes_read=46428 bytes_retransmit=0 bytes_invalid=0 send_seq=2384 receive_seq=2384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999221  heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=40.2 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.91 cputime=207.576 memavail=698056 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2650.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=285922 bytes_read=709027 bytes_retransmit=0 bytes_invalid=0 send_seq=15370 receive_seq=15370 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14464 bytes_read=46444 bytes_retransmit=0 bytes_invalid=0 send_seq=2385 receive_seq=2385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999210  heater_bed: target=60 temp=60.1 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.84 cputime=207.689 memavail=698056 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2651.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=286150 bytes_read=709480 bytes_retransmit=0 bytes_invalid=0 send_seq=15384 receive_seq=15384 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14470 bytes_read=46460 bytes_retransmit=0 bytes_invalid=0 send_seq=2386 receive_seq=2386 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999171  heater_bed: target=60 temp=60.0 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.84 cputime=207.802 memavail=698056 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2652.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=286334 bytes_read=709928 bytes_retransmit=0 bytes_invalid=0 send_seq=15397 receive_seq=15397 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14476 bytes_read=46476 bytes_retransmit=0 bytes_invalid=0 send_seq=2387 receive_seq=2387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999177  heater_bed: target=60 temp=60.1 pwm=0.220 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.84 cputime=207.912 memavail=698252 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2653.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=286534 bytes_read=710410 bytes_retransmit=0 bytes_invalid=0 send_seq=15411 receive_seq=15411 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14482 bytes_read=46505 bytes_retransmit=0 bytes_invalid=0 send_seq=2388 receive_seq=2388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999233  heater_bed: target=60 temp=60.1 pwm=0.196 raspberry_pi: temp=39.7 mcu_temp: temp=35.3 chamber: temp=20.8 sysload=0.84 cputime=208.029 memavail=698308 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2654.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=286718 bytes_read=710858 bytes_retransmit=0 bytes_invalid=0 send_seq=15424 receive_seq=15424 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14488 bytes_read=46521 bytes_retransmit=0 bytes_invalid=0 send_seq=2389 receive_seq=2389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999260  heater_bed: target=60 temp=60.1 pwm=0.196 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.84 cputime=208.139 memavail=698816 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2655.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=286918 bytes_read=711296 bytes_retransmit=0 bytes_invalid=0 send_seq=15438 receive_seq=15438 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14494 bytes_read=46537 bytes_retransmit=0 bytes_invalid=0 send_seq=2390 receive_seq=2390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999228  heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.77 cputime=208.253 memavail=698452 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2656.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=287134 bytes_read=711783 bytes_retransmit=0 bytes_invalid=0 send_seq=15453 receive_seq=15453 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14500 bytes_read=46553 bytes_retransmit=0 bytes_invalid=0 send_seq=2391 receive_seq=2391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999223  heater_bed: target=60 temp=60.2 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.77 cputime=208.366 memavail=698452 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.5 pwm=0.000
Stats 2657.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=287334 bytes_read=712251 bytes_retransmit=0 bytes_invalid=0 send_seq=15467 receive_seq=15467 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14506 bytes_read=46569 bytes_retransmit=0 bytes_invalid=0 send_seq=2392 receive_seq=2392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999212  heater_bed: target=60 temp=60.1 pwm=0.201 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.77 cputime=208.485 memavail=698572 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2658.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=287529 bytes_read=712684 bytes_retransmit=0 bytes_invalid=0 send_seq=15480 receive_seq=15480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14512 bytes_read=46598 bytes_retransmit=0 bytes_invalid=0 send_seq=2393 receive_seq=2393 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999171  heater_bed: target=60 temp=60.2 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.77 cputime=208.604 memavail=698824 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2659.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=287713 bytes_read=713161 bytes_retransmit=0 bytes_invalid=0 send_seq=15493 receive_seq=15493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14518 bytes_read=46614 bytes_retransmit=0 bytes_invalid=0 send_seq=2394 receive_seq=2394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999184  heater_bed: target=60 temp=60.2 pwm=0.142 raspberry_pi: temp=39.2 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.77 cputime=208.718 memavail=698824 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2660.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=287908 bytes_read=713609 bytes_retransmit=0 bytes_invalid=0 send_seq=15506 receive_seq=15506 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001400 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14524 bytes_read=46630 bytes_retransmit=0 bytes_invalid=0 send_seq=2395 receive_seq=2395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999214  heater_bed: target=60 temp=60.2 pwm=0.204 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.71 cputime=208.832 memavail=698824 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2661.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=288092 bytes_read=714057 bytes_retransmit=0 bytes_invalid=0 send_seq=15519 receive_seq=15519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14530 bytes_read=46646 bytes_retransmit=0 bytes_invalid=0 send_seq=2396 receive_seq=2396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999209  heater_bed: target=60 temp=60.1 pwm=0.204 raspberry_pi: temp=39.2 mcu_temp: temp=35.4 chamber: temp=20.7 sysload=0.71 cputime=208.953 memavail=698828 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2662.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=288276 bytes_read=714534 bytes_retransmit=0 bytes_invalid=0 send_seq=15532 receive_seq=15532 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001400 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14536 bytes_read=46662 bytes_retransmit=0 bytes_invalid=0 send_seq=2397 receive_seq=2397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999207  heater_bed: target=60 temp=60.1 pwm=0.204 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.71 cputime=209.065 memavail=698828 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2663.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=288476 bytes_read=714987 bytes_retransmit=0 bytes_invalid=0 send_seq=15546 receive_seq=15546 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14542 bytes_read=46691 bytes_retransmit=0 bytes_invalid=0 send_seq=2398 receive_seq=2398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999225  heater_bed: target=60 temp=60.1 pwm=0.272 raspberry_pi: temp=39.2 mcu_temp: temp=35.4 chamber: temp=20.8 sysload=0.71 cputime=209.178 memavail=698836 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2664.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=288660 bytes_read=715420 bytes_retransmit=0 bytes_invalid=0 send_seq=15559 receive_seq=15559 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001398 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14548 bytes_read=46707 bytes_retransmit=0 bytes_invalid=0 send_seq=2399 receive_seq=2399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999224  heater_bed: target=60 temp=60.0 pwm=0.272 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.71 cputime=209.298 memavail=698840 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2665.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=288882 bytes_read=715902 bytes_retransmit=0 bytes_invalid=0 send_seq=15573 receive_seq=15573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001397 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14554 bytes_read=46723 bytes_retransmit=0 bytes_invalid=0 send_seq=2400 receive_seq=2400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999391  heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=40.2 mcu_temp: temp=35.6 chamber: temp=20.8 sysload=0.65 cputime=209.411 memavail=698840 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2666.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=289066 bytes_read=716350 bytes_retransmit=0 bytes_invalid=0 send_seq=15586 receive_seq=15586 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001395 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14560 bytes_read=46739 bytes_retransmit=0 bytes_invalid=0 send_seq=2401 receive_seq=2401 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999372  heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=21.0 sysload=0.65 cputime=209.525 memavail=698840 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2667.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=289250 bytes_read=716813 bytes_retransmit=0 bytes_invalid=0 send_seq=15599 receive_seq=15599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001392 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14566 bytes_read=46755 bytes_retransmit=0 bytes_invalid=0 send_seq=2402 receive_seq=2402 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999351  heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.65 cputime=209.641 memavail=698600 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2668.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=289461 bytes_read=717295 bytes_retransmit=0 bytes_invalid=0 send_seq=15613 receive_seq=15613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14572 bytes_read=46784 bytes_retransmit=0 bytes_invalid=0 send_seq=2403 receive_seq=2403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999341  heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=40.2 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.65 cputime=209.753 memavail=698600 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2669.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=289645 bytes_read=717728 bytes_retransmit=0 bytes_invalid=0 send_seq=15626 receive_seq=15626 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14578 bytes_read=46800 bytes_retransmit=0 bytes_invalid=0 send_seq=2404 receive_seq=2404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999325  heater_bed: target=60 temp=59.9 pwm=0.224 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.65 cputime=209.864 memavail=698600 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2670.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=289829 bytes_read=718176 bytes_retransmit=0 bytes_invalid=0 send_seq=15639 receive_seq=15639 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14584 bytes_read=46816 bytes_retransmit=0 bytes_invalid=0 send_seq=2405 receive_seq=2405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999309  heater_bed: target=60 temp=59.9 pwm=0.224 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.60 cputime=209.985 memavail=698352 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2671.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=290013 bytes_read=718638 bytes_retransmit=0 bytes_invalid=0 send_seq=15652 receive_seq=15652 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14590 bytes_read=46832 bytes_retransmit=0 bytes_invalid=0 send_seq=2406 receive_seq=2406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999288  heater_bed: target=60 temp=59.9 pwm=0.224 raspberry_pi: temp=39.2 mcu_temp: temp=35.6 chamber: temp=20.8 sysload=0.60 cputime=210.094 memavail=698352 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2672.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=290208 bytes_read=719080 bytes_retransmit=0 bytes_invalid=0 send_seq=15665 receive_seq=15665 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001392 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14596 bytes_read=46848 bytes_retransmit=0 bytes_invalid=0 send_seq=2407 receive_seq=2407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999317  heater_bed: target=60 temp=59.9 pwm=0.232 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.60 cputime=210.201 memavail=698352 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.6 pwm=0.000
Stats 2673.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=290424 bytes_read=719538 bytes_retransmit=0 bytes_invalid=0 send_seq=15680 receive_seq=15680 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001395 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14602 bytes_read=46877 bytes_retransmit=0 bytes_invalid=0 send_seq=2408 receive_seq=2408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999229  heater_bed: target=60 temp=60.0 pwm=0.224 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.8 sysload=0.60 cputime=210.310 memavail=698360 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2674.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=290635 bytes_read=720020 bytes_retransmit=0 bytes_invalid=0 send_seq=15694 receive_seq=15694 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001405 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14608 bytes_read=46893 bytes_retransmit=0 bytes_invalid=0 send_seq=2409 receive_seq=2409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999200  heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.60 cputime=210.426 memavail=698360 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2675.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=290819 bytes_read=720453 bytes_retransmit=0 bytes_invalid=0 send_seq=15707 receive_seq=15707 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001403 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14614 bytes_read=46909 bytes_retransmit=0 bytes_invalid=0 send_seq=2410 receive_seq=2410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999157  heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.55 cputime=210.550 memavail=698360 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2676.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=291003 bytes_read=720945 bytes_retransmit=0 bytes_invalid=0 send_seq=15720 receive_seq=15720 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001402 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14620 bytes_read=46925 bytes_retransmit=0 bytes_invalid=0 send_seq=2411 receive_seq=2411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999176  heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.55 cputime=210.673 memavail=698364 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2677.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=291203 bytes_read=721398 bytes_retransmit=0 bytes_invalid=0 send_seq=15734 receive_seq=15734 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14626 bytes_read=46941 bytes_retransmit=0 bytes_invalid=0 send_seq=2412 receive_seq=2412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999181  heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.9 sysload=0.55 cputime=210.789 memavail=698364 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2678.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=291387 bytes_read=721831 bytes_retransmit=0 bytes_invalid=0 send_seq=15747 receive_seq=15747 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001404 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=14632 bytes_read=46970 bytes_retransmit=0 bytes_invalid=0 send_seq=2413 receive_seq=2413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999202  heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.55 cputime=210.897 memavail=698364 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2679.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=291571 bytes_read=722308 bytes_retransmit=0 bytes_invalid=0 send_seq=15760 receive_seq=15760 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001400 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=14644 bytes_read=47002 bytes_retransmit=0 bytes_invalid=0 send_seq=2415 receive_seq=2415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999181  heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=35.4 chamber: temp=20.9 sysload=0.55 cputime=211.005 memavail=698324 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2680.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=291755 bytes_read=722756 bytes_retransmit=0 bytes_invalid=0 send_seq=15773 receive_seq=15773 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=14650 bytes_read=47018 bytes_retransmit=0 bytes_invalid=0 send_seq=2416 receive_seq=2416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999290  heater_bed: target=60 temp=60.2 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.50 cputime=211.117 memavail=698324 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2681.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=291955 bytes_read=723194 bytes_retransmit=0 bytes_invalid=0 send_seq=15787 receive_seq=15787 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001394 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=14656 bytes_read=47034 bytes_retransmit=0 bytes_invalid=0 send_seq=2417 receive_seq=2417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999298  heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.50 cputime=211.228 memavail=698324 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2682.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=292139 bytes_read=723686 bytes_retransmit=0 bytes_invalid=0 send_seq=15800 receive_seq=15800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001393 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=14662 bytes_read=47050 bytes_retransmit=0 bytes_invalid=0 send_seq=2418 receive_seq=2418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999295  heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.50 cputime=211.350 memavail=698244 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2683.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=292323 bytes_read=724134 bytes_retransmit=0 bytes_invalid=0 send_seq=15813 receive_seq=15813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001393 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14668 bytes_read=47079 bytes_retransmit=0 bytes_invalid=0 send_seq=2419 receive_seq=2419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999298  heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=40.2 mcu_temp: temp=35.5 chamber: temp=20.8 sysload=0.50 cputime=211.469 memavail=698376 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.7 pwm=0.000
Stats 2684.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=292507 bytes_read=724567 bytes_retransmit=0 bytes_invalid=0 send_seq=15826 receive_seq=15826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14674 bytes_read=47095 bytes_retransmit=0 bytes_invalid=0 send_seq=2420 receive_seq=2420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999285  heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.50 cputime=211.583 memavail=698888 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2685.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=292707 bytes_read=725049 bytes_retransmit=0 bytes_invalid=0 send_seq=15840 receive_seq=15840 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14680 bytes_read=47111 bytes_retransmit=0 bytes_invalid=0 send_seq=2421 receive_seq=2421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999309  heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.8 sysload=0.54 cputime=211.696 memavail=698388 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2686.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=292891 bytes_read=725512 bytes_retransmit=0 bytes_invalid=0 send_seq=15853 receive_seq=15853 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001376 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14686 bytes_read=47127 bytes_retransmit=0 bytes_invalid=0 send_seq=2422 receive_seq=2422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999330  heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.54 cputime=211.806 memavail=698388 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2687.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=293075 bytes_read=725945 bytes_retransmit=0 bytes_invalid=0 send_seq=15866 receive_seq=15866 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=14692 bytes_read=47143 bytes_retransmit=0 bytes_invalid=0 send_seq=2423 receive_seq=2423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999365  heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.54 cputime=211.915 memavail=698388 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2688.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=293275 bytes_read=726427 bytes_retransmit=0 bytes_invalid=0 send_seq=15880 receive_seq=15880 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14698 bytes_read=47172 bytes_retransmit=0 bytes_invalid=0 send_seq=2424 receive_seq=2424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999325  heater_bed: target=60 temp=60.0 pwm=0.262 raspberry_pi: temp=39.2 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.54 cputime=212.020 memavail=698640 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2689.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=293486 bytes_read=726880 bytes_retransmit=0 bytes_invalid=0 send_seq=15894 receive_seq=15894 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14704 bytes_read=47188 bytes_retransmit=0 bytes_invalid=0 send_seq=2425 receive_seq=2425 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999293  heater_bed: target=60 temp=60.0 pwm=0.258 raspberry_pi: temp=39.2 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.54 cputime=212.127 memavail=696716 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2690.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=293702 bytes_read=727323 bytes_retransmit=0 bytes_invalid=0 send_seq=15909 receive_seq=15909 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14710 bytes_read=47204 bytes_retransmit=0 bytes_invalid=0 send_seq=2426 receive_seq=2426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999416  heater_bed: target=60 temp=60.0 pwm=0.261 raspberry_pi: temp=39.7 mcu_temp: temp=35.5 chamber: temp=21.0 sysload=0.58 cputime=212.207 memavail=698888 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2691.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=293929 bytes_read=727810 bytes_retransmit=0 bytes_invalid=0 send_seq=15924 receive_seq=15924 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14716 bytes_read=47220 bytes_retransmit=0 bytes_invalid=0 send_seq=2427 receive_seq=2427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999385  heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.58 cputime=212.300 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2692.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=294113 bytes_read=728273 bytes_retransmit=0 bytes_invalid=0 send_seq=15937 receive_seq=15937 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=14722 bytes_read=47236 bytes_retransmit=0 bytes_invalid=0 send_seq=2428 receive_seq=2428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999302  heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=40.2 mcu_temp: temp=35.7 chamber: temp=20.8 sysload=0.58 cputime=212.416 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2693.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=294297 bytes_read=728721 bytes_retransmit=0 bytes_invalid=0 send_seq=15950 receive_seq=15950 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001374 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14728 bytes_read=47265 bytes_retransmit=0 bytes_invalid=0 send_seq=2429 receive_seq=2429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999314  heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.58 cputime=212.527 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2694.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=294481 bytes_read=729194 bytes_retransmit=0 bytes_invalid=0 send_seq=15963 receive_seq=15963 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14734 bytes_read=47281 bytes_retransmit=0 bytes_invalid=0 send_seq=2430 receive_seq=2430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999344  heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=21.0 sysload=0.58 cputime=212.646 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.8 pwm=0.000
Stats 2695.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=294681 bytes_read=729619 bytes_retransmit=0 bytes_invalid=0 send_seq=15977 receive_seq=15977 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14740 bytes_read=47297 bytes_retransmit=0 bytes_invalid=0 send_seq=2431 receive_seq=2431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999388  heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.8 sysload=0.62 cputime=212.766 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2696.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=294865 bytes_read=730077 bytes_retransmit=0 bytes_invalid=0 send_seq=15990 receive_seq=15990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14746 bytes_read=47313 bytes_retransmit=0 bytes_invalid=0 send_seq=2432 receive_seq=2432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999353  heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.8 sysload=0.62 cputime=212.883 memavail=698652 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2697.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=295049 bytes_read=730554 bytes_retransmit=0 bytes_invalid=0 send_seq=16003 receive_seq=16003 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=14752 bytes_read=47329 bytes_retransmit=0 bytes_invalid=0 send_seq=2433 receive_seq=2433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999338  heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.62 cputime=212.990 memavail=698288 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2698.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=295233 bytes_read=730987 bytes_retransmit=0 bytes_invalid=0 send_seq=16016 receive_seq=16016 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=14758 bytes_read=47358 bytes_retransmit=0 bytes_invalid=0 send_seq=2434 receive_seq=2434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999286  heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=21.0 sysload=0.62 cputime=213.104 memavail=698412 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2699.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=295417 bytes_read=731435 bytes_retransmit=0 bytes_invalid=0 send_seq=16029 receive_seq=16029 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=14764 bytes_read=47374 bytes_retransmit=0 bytes_invalid=0 send_seq=2435 receive_seq=2435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999309  heater_bed: target=60 temp=60.1 pwm=0.116 raspberry_pi: temp=40.2 mcu_temp: temp=35.7 chamber: temp=21.0 sysload=0.62 cputime=213.220 memavail=698412 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2700.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=295634 bytes_read=731933 bytes_retransmit=0 bytes_invalid=0 send_seq=16044 receive_seq=16044 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=14770 bytes_read=47390 bytes_retransmit=0 bytes_invalid=0 send_seq=2436 receive_seq=2436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999297  heater_bed: target=60 temp=60.1 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.65 cputime=213.345 memavail=698920 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2701.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=295818 bytes_read=732381 bytes_retransmit=0 bytes_invalid=0 send_seq=16057 receive_seq=16057 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=14776 bytes_read=47406 bytes_retransmit=0 bytes_invalid=0 send_seq=2437 receive_seq=2437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999201  heater_bed: target=60 temp=60.1 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.65 cputime=213.452 memavail=698920 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2702.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=296002 bytes_read=732829 bytes_retransmit=0 bytes_invalid=0 send_seq=16070 receive_seq=16070 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001383 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=14782 bytes_read=47422 bytes_retransmit=0 bytes_invalid=0 send_seq=2438 receive_seq=2438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999195  heater_bed: target=60 temp=60.1 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.65 cputime=213.563 memavail=698924 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2703.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=296186 bytes_read=733306 bytes_retransmit=0 bytes_invalid=0 send_seq=16083 receive_seq=16083 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14788 bytes_read=47451 bytes_retransmit=0 bytes_invalid=0 send_seq=2439 receive_seq=2439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999195  heater_bed: target=60 temp=60.1 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.65 cputime=213.679 memavail=698676 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2704.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=296386 bytes_read=733744 bytes_retransmit=0 bytes_invalid=0 send_seq=16097 receive_seq=16097 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14794 bytes_read=47467 bytes_retransmit=0 bytes_invalid=0 send_seq=2440 receive_seq=2440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999194  heater_bed: target=60 temp=60.1 pwm=0.158 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.65 cputime=213.793 memavail=698172 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2705.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=296570 bytes_read=734192 bytes_retransmit=0 bytes_invalid=0 send_seq=16110 receive_seq=16110 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001383 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14800 bytes_read=47483 bytes_retransmit=0 bytes_invalid=0 send_seq=2441 receive_seq=2441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999191  heater_bed: target=60 temp=60.1 pwm=0.158 raspberry_pi: temp=40.2 mcu_temp: temp=35.7 chamber: temp=20.8 sysload=0.67 cputime=213.910 memavail=698172 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2706.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=296770 bytes_read=734674 bytes_retransmit=0 bytes_invalid=0 send_seq=16124 receive_seq=16124 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14806 bytes_read=47499 bytes_retransmit=0 bytes_invalid=0 send_seq=2442 receive_seq=2442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999194  heater_bed: target=60 temp=60.1 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=21.0 sysload=0.67 cputime=214.029 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2707.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=296954 bytes_read=735122 bytes_retransmit=0 bytes_invalid=0 send_seq=16137 receive_seq=16137 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001379 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=14812 bytes_read=47515 bytes_retransmit=0 bytes_invalid=0 send_seq=2443 receive_seq=2443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999227  heater_bed: target=60 temp=60.1 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=35.6 chamber: temp=20.9 sysload=0.67 cputime=214.151 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2708.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=297138 bytes_read=735599 bytes_retransmit=0 bytes_invalid=0 send_seq=16150 receive_seq=16150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14818 bytes_read=47544 bytes_retransmit=0 bytes_invalid=0 send_seq=2444 receive_seq=2444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999293  heater_bed: target=60 temp=60.1 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.67 cputime=214.280 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2709.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=297338 bytes_read=736052 bytes_retransmit=0 bytes_invalid=0 send_seq=16164 receive_seq=16164 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14824 bytes_read=47560 bytes_retransmit=0 bytes_invalid=0 send_seq=2445 receive_seq=2445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999268  heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=39.2 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.67 cputime=214.391 memavail=698940 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2710.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=297517 bytes_read=736480 bytes_retransmit=0 bytes_invalid=0 send_seq=16176 receive_seq=16176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14830 bytes_read=47576 bytes_retransmit=0 bytes_invalid=0 send_seq=2446 receive_seq=2446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999262  heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=39.2 mcu_temp: temp=35.5 chamber: temp=20.9 sysload=0.70 cputime=214.506 memavail=698940 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2711.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=297733 bytes_read=736982 bytes_retransmit=0 bytes_invalid=0 send_seq=16191 receive_seq=16191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14836 bytes_read=47592 bytes_retransmit=0 bytes_invalid=0 send_seq=2447 receive_seq=2447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999273  heater_bed: target=60 temp=60.1 pwm=0.157 raspberry_pi: temp=39.2 mcu_temp: temp=35.7 chamber: temp=21.0 sysload=0.70 cputime=214.622 memavail=698940 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=25.9 pwm=0.000
Stats 2712.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=297928 bytes_read=737430 bytes_retransmit=0 bytes_invalid=0 send_seq=16204 receive_seq=16204 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14842 bytes_read=47608 bytes_retransmit=0 bytes_invalid=0 send_seq=2448 receive_seq=2448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999254  heater_bed: target=60 temp=60.1 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.70 cputime=214.730 memavail=698936 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2713.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=298112 bytes_read=737863 bytes_retransmit=0 bytes_invalid=0 send_seq=16217 receive_seq=16217 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14848 bytes_read=47636 bytes_retransmit=0 bytes_invalid=0 send_seq=2449 receive_seq=2449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999263  heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=39.2 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.70 cputime=214.838 memavail=698936 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2714.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=298296 bytes_read=738340 bytes_retransmit=0 bytes_invalid=0 send_seq=16230 receive_seq=16230 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14854 bytes_read=47651 bytes_retransmit=0 bytes_invalid=0 send_seq=2450 receive_seq=2450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999267  heater_bed: target=60 temp=60.0 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=20.9 sysload=0.70 cputime=214.958 memavail=698944 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2715.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=298480 bytes_read=738788 bytes_retransmit=0 bytes_invalid=0 send_seq=16243 receive_seq=16243 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14860 bytes_read=47666 bytes_retransmit=0 bytes_invalid=0 send_seq=2451 receive_seq=2451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999225  heater_bed: target=60 temp=59.9 pwm=0.215 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.73 cputime=215.070 memavail=698948 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2716.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=298680 bytes_read=739226 bytes_retransmit=0 bytes_invalid=0 send_seq=16257 receive_seq=16257 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14866 bytes_read=47681 bytes_retransmit=0 bytes_invalid=0 send_seq=2452 receive_seq=2452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999221  heater_bed: target=60 temp=59.9 pwm=0.238 raspberry_pi: temp=39.2 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.73 cputime=215.187 memavail=698948 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2717.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=298864 bytes_read=739718 bytes_retransmit=0 bytes_invalid=0 send_seq=16270 receive_seq=16270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=14872 bytes_read=47696 bytes_retransmit=0 bytes_invalid=0 send_seq=2453 receive_seq=2453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999207  heater_bed: target=60 temp=59.9 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=20.9 sysload=0.73 cputime=215.302 memavail=698948 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2718.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=299048 bytes_read=740161 bytes_retransmit=0 bytes_invalid=0 send_seq=16283 receive_seq=16283 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=14878 bytes_read=47724 bytes_retransmit=0 bytes_invalid=0 send_seq=2454 receive_seq=2454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999205  heater_bed: target=60 temp=59.9 pwm=0.238 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.73 cputime=215.412 memavail=698704 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2719.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=299248 bytes_read=740586 bytes_retransmit=0 bytes_invalid=0 send_seq=16297 receive_seq=16297 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=14884 bytes_read=47740 bytes_retransmit=0 bytes_invalid=0 send_seq=2455 receive_seq=2455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999189  heater_bed: target=60 temp=59.9 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=21.0 sysload=0.73 cputime=215.528 memavail=698704 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2720.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=299464 bytes_read=741070 bytes_retransmit=0 bytes_invalid=0 send_seq=16312 receive_seq=16312 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=14890 bytes_read=47756 bytes_retransmit=0 bytes_invalid=0 send_seq=2456 receive_seq=2456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999202  heater_bed: target=60 temp=59.9 pwm=0.186 raspberry_pi: temp=39.2 mcu_temp: temp=35.7 chamber: temp=20.9 sysload=0.75 cputime=215.650 memavail=698704 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2721.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=299648 bytes_read=741518 bytes_retransmit=0 bytes_invalid=0 send_seq=16325 receive_seq=16325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=14896 bytes_read=47772 bytes_retransmit=0 bytes_invalid=0 send_seq=2457 receive_seq=2457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999254  heater_bed: target=60 temp=59.9 pwm=0.186 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.75 cputime=215.760 memavail=698708 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2722.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=299832 bytes_read=741966 bytes_retransmit=0 bytes_invalid=0 send_seq=16338 receive_seq=16338 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=14902 bytes_read=47788 bytes_retransmit=0 bytes_invalid=0 send_seq=2458 receive_seq=2458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999342  heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.75 cputime=215.874 memavail=698708 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2723.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=300016 bytes_read=742443 bytes_retransmit=0 bytes_invalid=0 send_seq=16351 receive_seq=16351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14908 bytes_read=47817 bytes_retransmit=0 bytes_invalid=0 send_seq=2459 receive_seq=2459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999359  heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=20.9 sysload=0.75 cputime=215.994 memavail=698700 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2724.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=300200 bytes_read=742891 bytes_retransmit=0 bytes_invalid=0 send_seq=16364 receive_seq=16364 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14914 bytes_read=47833 bytes_retransmit=0 bytes_invalid=0 send_seq=2460 receive_seq=2460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999360  heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.75 cputime=216.091 memavail=698204 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2725.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=300400 bytes_read=743329 bytes_retransmit=0 bytes_invalid=0 send_seq=16378 receive_seq=16378 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14920 bytes_read=47849 bytes_retransmit=0 bytes_invalid=0 send_seq=2461 receive_seq=2461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999416  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.77 cputime=216.213 memavail=698204 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.0 pwm=0.000
Stats 2726.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=300584 bytes_read=743836 bytes_retransmit=0 bytes_invalid=0 send_seq=16391 receive_seq=16391 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14926 bytes_read=47865 bytes_retransmit=0 bytes_invalid=0 send_seq=2462 receive_seq=2462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999385  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.2 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.77 cputime=216.334 memavail=698204 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2727.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=300763 bytes_read=744264 bytes_retransmit=0 bytes_invalid=0 send_seq=16403 receive_seq=16403 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14932 bytes_read=47881 bytes_retransmit=0 bytes_invalid=0 send_seq=2463 receive_seq=2463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999350  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.77 cputime=216.452 memavail=698200 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2728.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=300947 bytes_read=744697 bytes_retransmit=0 bytes_invalid=0 send_seq=16416 receive_seq=16416 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14938 bytes_read=47910 bytes_retransmit=0 bytes_invalid=0 send_seq=2464 receive_seq=2464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999306  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.77 cputime=216.561 memavail=698200 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2729.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=301185 bytes_read=745199 bytes_retransmit=0 bytes_invalid=0 send_seq=16431 receive_seq=16431 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14944 bytes_read=47926 bytes_retransmit=0 bytes_invalid=0 send_seq=2465 receive_seq=2465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999283  heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=39.2 mcu_temp: temp=35.8 chamber: temp=21.0 sysload=0.77 cputime=216.681 memavail=698200 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2730.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=301369 bytes_read=745632 bytes_retransmit=0 bytes_invalid=0 send_seq=16444 receive_seq=16444 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14950 bytes_read=47942 bytes_retransmit=0 bytes_invalid=0 send_seq=2466 receive_seq=2466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999252  heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=35.7 chamber: temp=21.0 sysload=0.79 cputime=216.794 memavail=698212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2731.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=301553 bytes_read=746095 bytes_retransmit=0 bytes_invalid=0 send_seq=16457 receive_seq=16457 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14956 bytes_read=47958 bytes_retransmit=0 bytes_invalid=0 send_seq=2467 receive_seq=2467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999243  heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=21.0 sysload=0.79 cputime=216.902 memavail=698212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2732.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=301748 bytes_read=746572 bytes_retransmit=0 bytes_invalid=0 send_seq=16470 receive_seq=16470 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=14962 bytes_read=47974 bytes_retransmit=0 bytes_invalid=0 send_seq=2468 receive_seq=2468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999270  heater_bed: target=60 temp=60.1 pwm=0.194 raspberry_pi: temp=39.2 mcu_temp: temp=35.8 chamber: temp=21.0 sysload=0.79 cputime=217.013 memavail=698212 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2733.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=301932 bytes_read=747005 bytes_retransmit=0 bytes_invalid=0 send_seq=16483 receive_seq=16483 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14968 bytes_read=48003 bytes_retransmit=0 bytes_invalid=0 send_seq=2469 receive_seq=2469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999303  heater_bed: target=60 temp=60.1 pwm=0.194 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=21.0 sysload=0.79 cputime=217.119 memavail=697968 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2734.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=302116 bytes_read=747453 bytes_retransmit=0 bytes_invalid=0 send_seq=16496 receive_seq=16496 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14980 bytes_read=48035 bytes_retransmit=0 bytes_invalid=0 send_seq=2471 receive_seq=2471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999284  heater_bed: target=60 temp=60.1 pwm=0.194 raspberry_pi: temp=40.2 mcu_temp: temp=35.8 chamber: temp=21.1 sysload=0.79 cputime=217.241 memavail=698472 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2735.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=302300 bytes_read=747930 bytes_retransmit=0 bytes_invalid=0 send_seq=16509 receive_seq=16509 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14986 bytes_read=48051 bytes_retransmit=0 bytes_invalid=0 send_seq=2472 receive_seq=2472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999432  heater_bed: target=60 temp=60.0 pwm=0.194 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.80 cputime=217.356 memavail=698472 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2736.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=302495 bytes_read=748363 bytes_retransmit=0 bytes_invalid=0 send_seq=16522 receive_seq=16522 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14992 bytes_read=48067 bytes_retransmit=0 bytes_invalid=0 send_seq=2473 receive_seq=2473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999406  heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=21.1 sysload=0.80 cputime=217.464 memavail=698476 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2737.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=302679 bytes_read=748826 bytes_retransmit=0 bytes_invalid=0 send_seq=16535 receive_seq=16535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=14998 bytes_read=48083 bytes_retransmit=0 bytes_invalid=0 send_seq=2474 receive_seq=2474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999376  heater_bed: target=60 temp=60.1 pwm=0.198 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.80 cputime=217.573 memavail=698476 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2738.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=302863 bytes_read=749303 bytes_retransmit=0 bytes_invalid=0 send_seq=16548 receive_seq=16548 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15004 bytes_read=48112 bytes_retransmit=0 bytes_invalid=0 send_seq=2475 receive_seq=2475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999356  heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=39.7 mcu_temp: temp=35.8 chamber: temp=21.0 sysload=0.80 cputime=217.686 memavail=698476 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2739.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=303047 bytes_read=749736 bytes_retransmit=0 bytes_invalid=0 send_seq=16561 receive_seq=16561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15010 bytes_read=48128 bytes_retransmit=0 bytes_invalid=0 send_seq=2476 receive_seq=2476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999341  heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=39.2 mcu_temp: temp=35.8 chamber: temp=20.9 sysload=0.80 cputime=217.795 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2740.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=303247 bytes_read=750218 bytes_retransmit=0 bytes_invalid=0 send_seq=16575 receive_seq=16575 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15016 bytes_read=48144 bytes_retransmit=0 bytes_invalid=0 send_seq=2477 receive_seq=2477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999300  heater_bed: target=60 temp=60.0 pwm=0.241 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.82 cputime=217.926 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2741.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=303431 bytes_read=750666 bytes_retransmit=0 bytes_invalid=0 send_seq=16588 receive_seq=16588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15022 bytes_read=48160 bytes_retransmit=0 bytes_invalid=0 send_seq=2478 receive_seq=2478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999308  heater_bed: target=60 temp=60.0 pwm=0.241 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.82 cputime=218.041 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2742.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=303615 bytes_read=751106 bytes_retransmit=0 bytes_invalid=0 send_seq=16601 receive_seq=16601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15028 bytes_read=48176 bytes_retransmit=0 bytes_invalid=0 send_seq=2479 receive_seq=2479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999333  heater_bed: target=60 temp=60.0 pwm=0.241 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=20.9 sysload=0.82 cputime=218.157 memavail=698488 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2743.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=303815 bytes_read=751575 bytes_retransmit=0 bytes_invalid=0 send_seq=16615 receive_seq=16615 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15034 bytes_read=48205 bytes_retransmit=0 bytes_invalid=0 send_seq=2480 receive_seq=2480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999279  heater_bed: target=60 temp=60.0 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.82 cputime=218.280 memavail=698488 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.1 pwm=0.000
Stats 2744.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=303999 bytes_read=752023 bytes_retransmit=0 bytes_invalid=0 send_seq=16628 receive_seq=16628 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15040 bytes_read=48221 bytes_retransmit=0 bytes_invalid=0 send_seq=2481 receive_seq=2481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999245  heater_bed: target=60 temp=60.0 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.1 sysload=0.82 cputime=218.402 memavail=698748 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.2 pwm=0.000
Stats 2745.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=304183 bytes_read=752456 bytes_retransmit=0 bytes_invalid=0 send_seq=16641 receive_seq=16641 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15046 bytes_read=48237 bytes_retransmit=0 bytes_invalid=0 send_seq=2482 receive_seq=2482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999266  heater_bed: target=60 temp=60.1 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.83 cputime=218.503 memavail=698484 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2746.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=304367 bytes_read=752933 bytes_retransmit=0 bytes_invalid=0 send_seq=16654 receive_seq=16654 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15052 bytes_read=48253 bytes_retransmit=0 bytes_invalid=0 send_seq=2483 receive_seq=2483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999267  heater_bed: target=60 temp=60.1 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.83 cputime=218.617 memavail=698500 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2747.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=304567 bytes_read=753401 bytes_retransmit=0 bytes_invalid=0 send_seq=16668 receive_seq=16668 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15058 bytes_read=48269 bytes_retransmit=0 bytes_invalid=0 send_seq=2484 receive_seq=2484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999241  heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.83 cputime=218.728 memavail=698500 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2748.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=304751 bytes_read=753834 bytes_retransmit=0 bytes_invalid=0 send_seq=16681 receive_seq=16681 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15064 bytes_read=48298 bytes_retransmit=0 bytes_invalid=0 send_seq=2485 receive_seq=2485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999266  heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.83 cputime=218.836 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2749.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=304935 bytes_read=754311 bytes_retransmit=0 bytes_invalid=0 send_seq=16694 receive_seq=16694 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15070 bytes_read=48314 bytes_retransmit=0 bytes_invalid=0 send_seq=2486 receive_seq=2486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999273  heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.83 cputime=218.946 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2750.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=305119 bytes_read=754759 bytes_retransmit=0 bytes_invalid=0 send_seq=16707 receive_seq=16707 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15076 bytes_read=48330 bytes_retransmit=0 bytes_invalid=0 send_seq=2487 receive_seq=2487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999284  heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.85 cputime=219.059 memavail=698508 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2751.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=305319 bytes_read=755197 bytes_retransmit=0 bytes_invalid=0 send_seq=16721 receive_seq=16721 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15082 bytes_read=48346 bytes_retransmit=0 bytes_invalid=0 send_seq=2488 receive_seq=2488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999286  heater_bed: target=60 temp=60.1 pwm=0.177 raspberry_pi: temp=39.2 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.85 cputime=219.164 memavail=698512 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2752.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=305530 bytes_read=755694 bytes_retransmit=0 bytes_invalid=0 send_seq=16735 receive_seq=16735 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15088 bytes_read=48362 bytes_retransmit=0 bytes_invalid=0 send_seq=2489 receive_seq=2489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999284  heater_bed: target=60 temp=60.1 pwm=0.158 raspberry_pi: temp=39.2 mcu_temp: temp=35.9 chamber: temp=21.1 sysload=0.85 cputime=219.278 memavail=698512 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2753.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=305709 bytes_read=756137 bytes_retransmit=0 bytes_invalid=0 send_seq=16747 receive_seq=16747 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15094 bytes_read=48391 bytes_retransmit=0 bytes_invalid=0 send_seq=2490 receive_seq=2490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999280  heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.85 cputime=219.395 memavail=698512 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2754.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=305904 bytes_read=756570 bytes_retransmit=0 bytes_invalid=0 send_seq=16760 receive_seq=16760 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15100 bytes_read=48407 bytes_retransmit=0 bytes_invalid=0 send_seq=2491 receive_seq=2491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999329  heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.85 cputime=219.518 memavail=698772 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2755.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=306089 bytes_read=757058 bytes_retransmit=0 bytes_invalid=0 send_seq=16773 receive_seq=16773 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15106 bytes_read=48423 bytes_retransmit=0 bytes_invalid=0 send_seq=2492 receive_seq=2492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999313  heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=20.9 sysload=0.86 cputime=219.637 memavail=698772 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2756.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=306295 bytes_read=757506 bytes_retransmit=0 bytes_invalid=0 send_seq=16786 receive_seq=16786 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15112 bytes_read=48439 bytes_retransmit=0 bytes_invalid=0 send_seq=2493 receive_seq=2493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999285  heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.86 cputime=219.758 memavail=698772 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2757.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=306474 bytes_read=757949 bytes_retransmit=0 bytes_invalid=0 send_seq=16798 receive_seq=16798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15118 bytes_read=48455 bytes_retransmit=0 bytes_invalid=0 send_seq=2494 receive_seq=2494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999250  heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.86 cputime=219.869 memavail=698776 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2758.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=306685 bytes_read=758431 bytes_retransmit=0 bytes_invalid=0 send_seq=16812 receive_seq=16812 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15124 bytes_read=48484 bytes_retransmit=0 bytes_invalid=0 send_seq=2495 receive_seq=2495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999257  heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.86 cputime=219.982 memavail=698776 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2759.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=306864 bytes_read=758874 bytes_retransmit=0 bytes_invalid=0 send_seq=16824 receive_seq=16824 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15130 bytes_read=48500 bytes_retransmit=0 bytes_invalid=0 send_seq=2496 receive_seq=2496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999270  heater_bed: target=60 temp=60.1 pwm=0.213 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.86 cputime=220.101 memavail=698776 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2760.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=307043 bytes_read=759317 bytes_retransmit=0 bytes_invalid=0 send_seq=16836 receive_seq=16836 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15136 bytes_read=48516 bytes_retransmit=0 bytes_invalid=0 send_seq=2497 receive_seq=2497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999269  heater_bed: target=60 temp=60.0 pwm=0.213 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.87 cputime=220.213 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2761.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=307249 bytes_read=759794 bytes_retransmit=0 bytes_invalid=0 send_seq=16849 receive_seq=16849 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15142 bytes_read=48532 bytes_retransmit=0 bytes_invalid=0 send_seq=2498 receive_seq=2498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999291  heater_bed: target=60 temp=60.0 pwm=0.206 raspberry_pi: temp=39.2 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.87 cputime=220.327 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2762.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=307428 bytes_read=760237 bytes_retransmit=0 bytes_invalid=0 send_seq=16861 receive_seq=16861 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15148 bytes_read=48548 bytes_retransmit=0 bytes_invalid=0 send_seq=2499 receive_seq=2499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999318  heater_bed: target=60 temp=60.0 pwm=0.206 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.87 cputime=220.435 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2763.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=307602 bytes_read=760675 bytes_retransmit=0 bytes_invalid=0 send_seq=16872 receive_seq=16872 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15154 bytes_read=48577 bytes_retransmit=0 bytes_invalid=0 send_seq=2500 receive_seq=2500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999326  heater_bed: target=60 temp=60.0 pwm=0.206 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.87 cputime=220.549 memavail=699040 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2764.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=307808 bytes_read=761152 bytes_retransmit=0 bytes_invalid=0 send_seq=16885 receive_seq=16885 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15160 bytes_read=48593 bytes_retransmit=0 bytes_invalid=0 send_seq=2501 receive_seq=2501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999288  heater_bed: target=60 temp=60.0 pwm=0.257 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=20.9 sysload=0.87 cputime=220.638 memavail=699536 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.3 pwm=0.000
Stats 2765.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=308011 bytes_read=761585 bytes_retransmit=0 bytes_invalid=0 send_seq=16899 receive_seq=16898 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15166 bytes_read=48609 bytes_retransmit=0 bytes_invalid=0 send_seq=2502 receive_seq=2502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999263  heater_bed: target=60 temp=59.9 pwm=0.202 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=20.9 sysload=0.80 cputime=220.761 memavail=699544 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2766.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=308195 bytes_read=762055 bytes_retransmit=0 bytes_invalid=0 send_seq=16912 receive_seq=16912 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15172 bytes_read=48625 bytes_retransmit=0 bytes_invalid=0 send_seq=2503 receive_seq=2503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999267  heater_bed: target=60 temp=60.0 pwm=0.202 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.80 cputime=220.873 memavail=699052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2767.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=308374 bytes_read=762498 bytes_retransmit=0 bytes_invalid=0 send_seq=16924 receive_seq=16923 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15178 bytes_read=48641 bytes_retransmit=0 bytes_invalid=0 send_seq=2504 receive_seq=2504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999246  heater_bed: target=60 temp=60.0 pwm=0.202 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.0 sysload=0.80 cputime=220.979 memavail=699052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2768.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=308553 bytes_read=762926 bytes_retransmit=0 bytes_invalid=0 send_seq=16936 receive_seq=16935 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15184 bytes_read=48670 bytes_retransmit=0 bytes_invalid=0 send_seq=2505 receive_seq=2505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999237  heater_bed: target=60 temp=59.9 pwm=0.202 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.80 cputime=221.089 memavail=699052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2769.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=308748 bytes_read=763403 bytes_retransmit=0 bytes_invalid=0 send_seq=16949 receive_seq=16948 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15190 bytes_read=48686 bytes_retransmit=0 bytes_invalid=0 send_seq=2506 receive_seq=2506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999202  heater_bed: target=60 temp=59.9 pwm=0.201 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.80 cputime=221.201 memavail=699036 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2770.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=308970 bytes_read=763861 bytes_retransmit=0 bytes_invalid=0 send_seq=16963 receive_seq=16963 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15196 bytes_read=48702 bytes_retransmit=0 bytes_invalid=0 send_seq=2507 receive_seq=2507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999216  heater_bed: target=60 temp=60.0 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.74 cputime=221.310 memavail=699052 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.4 pwm=0.000
Stats 2771.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=309165 bytes_read=764309 bytes_retransmit=0 bytes_invalid=0 send_seq=16976 receive_seq=16976 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15202 bytes_read=48718 bytes_retransmit=0 bytes_invalid=0 send_seq=2508 receive_seq=2508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999216  heater_bed: target=60 temp=60.0 pwm=0.231 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.74 cputime=221.425 memavail=698948 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2772.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=309365 bytes_read=764791 bytes_retransmit=0 bytes_invalid=0 send_seq=16990 receive_seq=16990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15208 bytes_read=48734 bytes_retransmit=0 bytes_invalid=0 send_seq=2509 receive_seq=2509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999250  heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=39.2 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.74 cputime=221.541 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2773.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=309555 bytes_read=765234 bytes_retransmit=0 bytes_invalid=0 send_seq=17003 receive_seq=17002 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15214 bytes_read=48763 bytes_retransmit=0 bytes_invalid=0 send_seq=2510 receive_seq=2510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999291  heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.74 cputime=221.644 memavail=699064 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2774.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=309733 bytes_read=765667 bytes_retransmit=0 bytes_invalid=0 send_seq=17016 receive_seq=17015 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15220 bytes_read=48779 bytes_retransmit=0 bytes_invalid=0 send_seq=2511 receive_seq=2511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999271  heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.74 cputime=221.747 memavail=698812 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2775.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=309917 bytes_read=766144 bytes_retransmit=0 bytes_invalid=0 send_seq=17029 receive_seq=17028 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15226 bytes_read=48795 bytes_retransmit=0 bytes_invalid=0 send_seq=2512 receive_seq=2512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999278  heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.76 cputime=221.856 memavail=698564 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2776.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=310117 bytes_read=766597 bytes_retransmit=0 bytes_invalid=0 send_seq=17043 receive_seq=17042 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15232 bytes_read=48811 bytes_retransmit=0 bytes_invalid=0 send_seq=2513 receive_seq=2513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999263  heater_bed: target=60 temp=60.0 pwm=0.223 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.76 cputime=221.971 memavail=698564 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2777.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=310317 bytes_read=767050 bytes_retransmit=0 bytes_invalid=0 send_seq=17057 receive_seq=17056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15238 bytes_read=48827 bytes_retransmit=0 bytes_invalid=0 send_seq=2514 receive_seq=2514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999525  heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.76 cputime=222.087 memavail=698272 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2778.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=310501 bytes_read=767532 bytes_retransmit=0 bytes_invalid=0 send_seq=17070 receive_seq=17070 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15244 bytes_read=48856 bytes_retransmit=0 bytes_invalid=0 send_seq=2515 receive_seq=2515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999421  heater_bed: target=60 temp=60.1 pwm=0.171 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.76 cputime=222.205 memavail=698572 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2779.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=310743 bytes_read=767980 bytes_retransmit=0 bytes_invalid=0 send_seq=17084 receive_seq=17083 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15250 bytes_read=48872 bytes_retransmit=0 bytes_invalid=0 send_seq=2516 receive_seq=2516 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999387  heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.76 cputime=222.313 memavail=698572 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2780.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=310913 bytes_read=768413 bytes_retransmit=0 bytes_invalid=0 send_seq=17096 receive_seq=17096 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15256 bytes_read=48888 bytes_retransmit=0 bytes_invalid=0 send_seq=2517 receive_seq=2517 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999490  heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=39.7 mcu_temp: temp=35.9 chamber: temp=21.0 sysload=0.70 cputime=222.421 memavail=698468 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2781.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=311108 bytes_read=768900 bytes_retransmit=0 bytes_invalid=0 send_seq=17109 receive_seq=17108 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15262 bytes_read=48904 bytes_retransmit=0 bytes_invalid=0 send_seq=2518 receive_seq=2518 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999424  heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.70 cputime=222.533 memavail=698576 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2782.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=311287 bytes_read=769343 bytes_retransmit=0 bytes_invalid=0 send_seq=17121 receive_seq=17120 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15268 bytes_read=48920 bytes_retransmit=0 bytes_invalid=0 send_seq=2519 receive_seq=2519 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999332  heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.70 cputime=222.649 memavail=698576 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2783.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=311466 bytes_read=769771 bytes_retransmit=0 bytes_invalid=0 send_seq=17133 receive_seq=17132 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15274 bytes_read=48949 bytes_retransmit=0 bytes_invalid=0 send_seq=2520 receive_seq=2520 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999254  heater_bed: target=60 temp=60.1 pwm=0.166 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.0 sysload=0.70 cputime=222.762 memavail=698576 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2784.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=311661 bytes_read=770248 bytes_retransmit=0 bytes_invalid=0 send_seq=17146 receive_seq=17145 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15280 bytes_read=48965 bytes_retransmit=0 bytes_invalid=0 send_seq=2521 receive_seq=2521 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999252  heater_bed: target=60 temp=60.0 pwm=0.234 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.70 cputime=222.840 memavail=698180 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2785.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=311856 bytes_read=770701 bytes_retransmit=0 bytes_invalid=0 send_seq=17159 receive_seq=17159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15286 bytes_read=48981 bytes_retransmit=0 bytes_invalid=0 send_seq=2522 receive_seq=2522 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999277  heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.64 cputime=222.954 memavail=698332 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2786.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=312035 bytes_read=771159 bytes_retransmit=0 bytes_invalid=0 send_seq=17171 receive_seq=17171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15292 bytes_read=48997 bytes_retransmit=0 bytes_invalid=0 send_seq=2523 receive_seq=2523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999247  heater_bed: target=60 temp=60.1 pwm=0.162 raspberry_pi: temp=39.2 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.64 cputime=223.080 memavail=698332 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2787.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=312219 bytes_read=771631 bytes_retransmit=0 bytes_invalid=0 send_seq=17184 receive_seq=17183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15298 bytes_read=49013 bytes_retransmit=0 bytes_invalid=0 send_seq=2524 receive_seq=2524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999251  heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.64 cputime=223.168 memavail=698588 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2788.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=312403 bytes_read=772064 bytes_retransmit=0 bytes_invalid=0 send_seq=17197 receive_seq=17196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=15310 bytes_read=49058 bytes_retransmit=0 bytes_invalid=0 send_seq=2526 receive_seq=2526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999356  heater_bed: target=60 temp=60.1 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.64 cputime=223.285 memavail=698588 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2789.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=312619 bytes_read=772521 bytes_retransmit=0 bytes_invalid=0 send_seq=17212 receive_seq=17211 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=15316 bytes_read=49074 bytes_retransmit=0 bytes_invalid=0 send_seq=2527 receive_seq=2527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999379  heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.64 cputime=223.399 memavail=698192 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.5 pwm=0.000
Stats 2791.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=312819 bytes_read=772987 bytes_retransmit=0 bytes_invalid=0 send_seq=17226 receive_seq=17225 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=15322 bytes_read=49090 bytes_retransmit=0 bytes_invalid=0 send_seq=2528 receive_seq=2528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999393  heater_bed: target=60 temp=60.0 pwm=0.209 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.59 cputime=223.507 memavail=698192 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2792.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=313006 bytes_read=773415 bytes_retransmit=0 bytes_invalid=0 send_seq=17238 receive_seq=17238 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=15328 bytes_read=49106 bytes_retransmit=0 bytes_invalid=0 send_seq=2529 receive_seq=2529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999396  heater_bed: target=60 temp=60.1 pwm=0.158 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.59 cputime=223.612 memavail=698344 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2793.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=313209 bytes_read=773892 bytes_retransmit=0 bytes_invalid=0 send_seq=17252 receive_seq=17251 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=15334 bytes_read=49122 bytes_retransmit=0 bytes_invalid=0 send_seq=2530 receive_seq=2530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999377  heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.59 cputime=223.751 memavail=698544 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2794.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=313393 bytes_read=774360 bytes_retransmit=0 bytes_invalid=0 send_seq=17265 receive_seq=17265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000022 bytes_write=15340 bytes_read=49138 bytes_retransmit=0 bytes_invalid=0 send_seq=2531 receive_seq=2531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999355  heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=39.2 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.59 cputime=223.872 memavail=698600 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2795.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=313572 bytes_read=774783 bytes_retransmit=0 bytes_invalid=0 send_seq=17277 receive_seq=17276 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15346 bytes_read=49167 bytes_retransmit=0 bytes_invalid=0 send_seq=2532 receive_seq=2532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999370  heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.59 cputime=223.976 memavail=699268 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2796.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=313767 bytes_read=775260 bytes_retransmit=0 bytes_invalid=0 send_seq=17290 receive_seq=17289 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=25 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15352 bytes_read=49183 bytes_retransmit=0 bytes_invalid=0 send_seq=2533 receive_seq=2533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999370  heater_bed: target=60 temp=60.1 pwm=0.137 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.54 cputime=224.093 memavail=699252 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2797.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=313943 bytes_read=775708 bytes_retransmit=0 bytes_invalid=0 send_seq=17302 receive_seq=17302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15358 bytes_read=49199 bytes_retransmit=0 bytes_invalid=0 send_seq=2534 receive_seq=2534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999349  heater_bed: target=60 temp=60.1 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=20.9 sysload=0.54 cputime=224.188 memavail=699368 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2798.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=314138 bytes_read=776156 bytes_retransmit=0 bytes_invalid=0 send_seq=17315 receive_seq=17315 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15364 bytes_read=49215 bytes_retransmit=0 bytes_invalid=0 send_seq=2535 receive_seq=2535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999319  heater_bed: target=60 temp=60.1 pwm=0.198 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.54 cputime=224.300 memavail=699368 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2799.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=314333 bytes_read=776618 bytes_retransmit=0 bytes_invalid=0 send_seq=17328 receive_seq=17328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15370 bytes_read=49231 bytes_retransmit=0 bytes_invalid=0 send_seq=2536 receive_seq=2536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999277  heater_bed: target=60 temp=60.2 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.54 cputime=224.412 memavail=698884 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2800.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=314512 bytes_read=777076 bytes_retransmit=0 bytes_invalid=0 send_seq=17340 receive_seq=17340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15376 bytes_read=49259 bytes_retransmit=0 bytes_invalid=0 send_seq=2537 receive_seq=2537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999244  heater_bed: target=60 temp=60.2 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.54 cputime=224.521 memavail=698884 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2801.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=314707 bytes_read=777509 bytes_retransmit=0 bytes_invalid=0 send_seq=17353 receive_seq=17353 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15382 bytes_read=49274 bytes_retransmit=0 bytes_invalid=0 send_seq=2538 receive_seq=2538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999253  heater_bed: target=60 temp=60.2 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.50 cputime=224.639 memavail=699116 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2802.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=314894 bytes_read=778001 bytes_retransmit=0 bytes_invalid=0 send_seq=17366 receive_seq=17366 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15388 bytes_read=49289 bytes_retransmit=0 bytes_invalid=0 send_seq=2539 receive_seq=2539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999273  heater_bed: target=60 temp=60.2 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.50 cputime=224.768 memavail=698796 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2803.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=315097 bytes_read=778449 bytes_retransmit=0 bytes_invalid=0 send_seq=17379 receive_seq=17379 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15394 bytes_read=49304 bytes_retransmit=0 bytes_invalid=0 send_seq=2540 receive_seq=2540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999317  heater_bed: target=60 temp=60.2 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.50 cputime=224.877 memavail=698876 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.6 pwm=0.000
Stats 2804.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=315276 bytes_read=778877 bytes_retransmit=0 bytes_invalid=0 send_seq=17391 receive_seq=17391 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15400 bytes_read=49319 bytes_retransmit=0 bytes_invalid=0 send_seq=2541 receive_seq=2541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999302  heater_bed: target=60 temp=60.3 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.50 cputime=224.991 memavail=698876 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2805.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=315463 bytes_read=779349 bytes_retransmit=0 bytes_invalid=0 send_seq=17404 receive_seq=17403 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15406 bytes_read=49348 bytes_retransmit=0 bytes_invalid=0 send_seq=2542 receive_seq=2542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999281  heater_bed: target=60 temp=60.2 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.50 cputime=225.114 memavail=698676 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2806.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=315642 bytes_read=779797 bytes_retransmit=0 bytes_invalid=0 send_seq=17416 receive_seq=17416 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15412 bytes_read=49364 bytes_retransmit=0 bytes_invalid=0 send_seq=2543 receive_seq=2543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999285  heater_bed: target=60 temp=60.2 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.46 cputime=225.231 memavail=698876 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2807.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=315853 bytes_read=780230 bytes_retransmit=0 bytes_invalid=0 send_seq=17430 receive_seq=17429 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15418 bytes_read=49380 bytes_retransmit=0 bytes_invalid=0 send_seq=2544 receive_seq=2544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999292  heater_bed: target=60 temp=60.2 pwm=0.150 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.0 sysload=0.46 cputime=225.348 memavail=698876 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2808.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=316040 bytes_read=780722 bytes_retransmit=0 bytes_invalid=0 send_seq=17442 receive_seq=17442 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15424 bytes_read=49396 bytes_retransmit=0 bytes_invalid=0 send_seq=2545 receive_seq=2545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999268  heater_bed: target=60 temp=60.1 pwm=0.217 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.46 cputime=225.447 memavail=698504 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2809.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=316233 bytes_read=781186 bytes_retransmit=0 bytes_invalid=0 send_seq=17456 receive_seq=17456 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15430 bytes_read=49412 bytes_retransmit=0 bytes_invalid=0 send_seq=2546 receive_seq=2546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999264  heater_bed: target=60 temp=60.1 pwm=0.217 raspberry_pi: temp=39.2 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.46 cputime=225.577 memavail=698636 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2810.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=316409 bytes_read=781614 bytes_retransmit=0 bytes_invalid=0 send_seq=17468 receive_seq=17468 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15436 bytes_read=49441 bytes_retransmit=0 bytes_invalid=0 send_seq=2547 receive_seq=2547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999244  heater_bed: target=60 temp=60.1 pwm=0.217 raspberry_pi: temp=39.2 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.46 cputime=225.687 memavail=696976 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2811.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=316607 bytes_read=782091 bytes_retransmit=0 bytes_invalid=0 send_seq=17482 receive_seq=17481 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15442 bytes_read=49457 bytes_retransmit=0 bytes_invalid=0 send_seq=2548 receive_seq=2548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999220  heater_bed: target=60 temp=60.0 pwm=0.217 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.1 sysload=0.42 cputime=225.775 memavail=698716 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2812.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=316796 bytes_read=782554 bytes_retransmit=0 bytes_invalid=0 send_seq=17495 receive_seq=17494 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15448 bytes_read=49473 bytes_retransmit=0 bytes_invalid=0 send_seq=2549 receive_seq=2549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999204  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=40.2 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.42 cputime=225.887 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2813.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=316991 bytes_read=782992 bytes_retransmit=0 bytes_invalid=0 send_seq=17508 receive_seq=17508 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15454 bytes_read=49489 bytes_retransmit=0 bytes_invalid=0 send_seq=2550 receive_seq=2550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999218  heater_bed: target=60 temp=59.9 pwm=0.237 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.42 cputime=225.994 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2814.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=317202 bytes_read=783465 bytes_retransmit=0 bytes_invalid=0 send_seq=17522 receive_seq=17521 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15460 bytes_read=49505 bytes_retransmit=0 bytes_invalid=0 send_seq=2551 receive_seq=2551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999265  heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=36.0 chamber: temp=21.1 sysload=0.42 cputime=226.106 memavail=698896 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2815.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=317386 bytes_read=783904 bytes_retransmit=0 bytes_invalid=0 send_seq=17535 receive_seq=17535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15466 bytes_read=49534 bytes_retransmit=0 bytes_invalid=0 send_seq=2552 receive_seq=2552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999288  heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.0 sysload=0.42 cputime=226.229 memavail=698392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2816.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=317565 bytes_read=784324 bytes_retransmit=0 bytes_invalid=0 send_seq=17547 receive_seq=17546 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15472 bytes_read=49550 bytes_retransmit=0 bytes_invalid=0 send_seq=2553 receive_seq=2553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999259  heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.47 cputime=226.351 memavail=698392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2817.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=317757 bytes_read=784806 bytes_retransmit=0 bytes_invalid=0 send_seq=17560 receive_seq=17560 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15478 bytes_read=49566 bytes_retransmit=0 bytes_invalid=0 send_seq=2554 receive_seq=2554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999295  heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=39.2 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.47 cputime=226.450 memavail=697720 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.7 pwm=0.000
Stats 2818.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=317960 bytes_read=785269 bytes_retransmit=0 bytes_invalid=0 send_seq=17574 receive_seq=17573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15484 bytes_read=49582 bytes_retransmit=0 bytes_invalid=0 send_seq=2555 receive_seq=2555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999223  heater_bed: target=60 temp=60.1 pwm=0.087 raspberry_pi: temp=39.2 mcu_temp: temp=36.1 chamber: temp=21.2 sysload=0.47 cputime=226.571 memavail=697900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2819.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=318155 bytes_read=785722 bytes_retransmit=0 bytes_invalid=0 send_seq=17587 receive_seq=17587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15490 bytes_read=49598 bytes_retransmit=0 bytes_invalid=0 send_seq=2556 receive_seq=2556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999255  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.47 cputime=226.684 memavail=697900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2820.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=318334 bytes_read=786194 bytes_retransmit=0 bytes_invalid=0 send_seq=17599 receive_seq=17599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15496 bytes_read=49627 bytes_retransmit=0 bytes_invalid=0 send_seq=2557 receive_seq=2557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999245  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.47 cputime=226.788 memavail=697796 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2821.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=318513 bytes_read=786617 bytes_retransmit=0 bytes_invalid=0 send_seq=17611 receive_seq=17610 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15502 bytes_read=49643 bytes_retransmit=0 bytes_invalid=0 send_seq=2558 receive_seq=2558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999277  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.51 cputime=226.895 memavail=697900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2822.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=318692 bytes_read=787080 bytes_retransmit=0 bytes_invalid=0 send_seq=17623 receive_seq=17623 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15508 bytes_read=49659 bytes_retransmit=0 bytes_invalid=0 send_seq=2559 receive_seq=2559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999286  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.0 sysload=0.51 cputime=227.009 memavail=697900 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2823.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=318871 bytes_read=787552 bytes_retransmit=0 bytes_invalid=0 send_seq=17635 receive_seq=17635 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15514 bytes_read=49675 bytes_retransmit=0 bytes_invalid=0 send_seq=2560 receive_seq=2560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999231  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.51 cputime=227.123 memavail=697864 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2824.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=319066 bytes_read=787980 bytes_retransmit=0 bytes_invalid=0 send_seq=17648 receive_seq=17647 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15520 bytes_read=49691 bytes_retransmit=0 bytes_invalid=0 send_seq=2561 receive_seq=2561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999220  heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.51 cputime=227.227 memavail=697912 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2825.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=319245 bytes_read=788437 bytes_retransmit=0 bytes_invalid=0 send_seq=17660 receive_seq=17659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15526 bytes_read=49720 bytes_retransmit=0 bytes_invalid=0 send_seq=2562 receive_seq=2562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999233  heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.0 sysload=0.51 cputime=227.333 memavail=698668 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2826.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=319536 bytes_read=789119 bytes_retransmit=0 bytes_invalid=0 send_seq=17686 receive_seq=17685 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15532 bytes_read=49736 bytes_retransmit=0 bytes_invalid=0 send_seq=2563 receive_seq=2563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999269  heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.55 cputime=227.468 memavail=698256 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2827.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=319883 bytes_read=789909 bytes_retransmit=0 bytes_invalid=0 send_seq=17719 receive_seq=17718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15538 bytes_read=49752 bytes_retransmit=0 bytes_invalid=0 send_seq=2564 receive_seq=2564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999257  heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.3 sysload=0.55 cputime=227.632 memavail=698416 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2828.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=320313 bytes_read=790855 bytes_retransmit=0 bytes_invalid=0 send_seq=17761 receive_seq=17761 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15544 bytes_read=49768 bytes_retransmit=0 bytes_invalid=0 send_seq=2565 receive_seq=2565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999292  heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.55 cputime=227.805 memavail=698416 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2829.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=320780 bytes_read=791847 bytes_retransmit=0 bytes_invalid=0 send_seq=17808 receive_seq=17808 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=15550 bytes_read=49784 bytes_retransmit=0 bytes_invalid=0 send_seq=2566 receive_seq=2566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999258  heater_bed: target=60 temp=60.1 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.1 sysload=0.55 cputime=227.985 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2830.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=321260 bytes_read=792867 bytes_retransmit=0 bytes_invalid=0 send_seq=17858 receive_seq=17857 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15556 bytes_read=49813 bytes_retransmit=0 bytes_invalid=0 send_seq=2567 receive_seq=2567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999273  heater_bed: target=60 temp=60.1 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.2 sysload=0.55 cputime=228.168 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2831.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=321735 bytes_read=793895 bytes_retransmit=0 bytes_invalid=0 send_seq=17907 receive_seq=17906 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15562 bytes_read=49829 bytes_retransmit=0 bytes_invalid=0 send_seq=2568 receive_seq=2568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999292  heater_bed: target=60 temp=60.1 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.59 cputime=228.346 memavail=698428 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2832.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000006 mcu_task_stddev=0.000008 bytes_write=322090 bytes_read=794683 bytes_retransmit=0 bytes_invalid=0 send_seq=17941 receive_seq=17941 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15568 bytes_read=49845 bytes_retransmit=0 bytes_invalid=0 send_seq=2569 receive_seq=2569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999314  heater_bed: target=60 temp=60.0 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.59 cputime=228.499 memavail=698624 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2833.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=322477 bytes_read=795491 bytes_retransmit=0 bytes_invalid=0 send_seq=17978 receive_seq=17978 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15574 bytes_read=49861 bytes_retransmit=0 bytes_invalid=0 send_seq=2570 receive_seq=2570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999316  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.59 cputime=228.672 memavail=698692 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2834.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=322872 bytes_read=796366 bytes_retransmit=0 bytes_invalid=0 send_seq=18017 receive_seq=18016 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15580 bytes_read=49877 bytes_retransmit=0 bytes_invalid=0 send_seq=2571 receive_seq=2571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999336  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.1 sysload=0.59 cputime=228.836 memavail=698692 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2835.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=323203 bytes_read=797118 bytes_retransmit=0 bytes_invalid=0 send_seq=18048 receive_seq=18048 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15586 bytes_read=49906 bytes_retransmit=0 bytes_invalid=0 send_seq=2572 receive_seq=2572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999281  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.1 sysload=0.59 cputime=228.978 memavail=698392 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2836.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=323609 bytes_read=797962 bytes_retransmit=0 bytes_invalid=0 send_seq=18086 receive_seq=18086 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15592 bytes_read=49922 bytes_retransmit=0 bytes_invalid=0 send_seq=2573 receive_seq=2573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999279  heater_bed: target=60 temp=60.0 pwm=0.240 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.3 sysload=0.62 cputime=229.150 memavail=698440 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2837.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=323927 bytes_read=798679 bytes_retransmit=0 bytes_invalid=0 send_seq=18114 receive_seq=18114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15598 bytes_read=49938 bytes_retransmit=0 bytes_invalid=0 send_seq=2574 receive_seq=2574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999228  heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=39.7 mcu_temp: temp=36.1 chamber: temp=21.2 sysload=0.62 cputime=229.299 memavail=698440 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2838.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=324162 bytes_read=799251 bytes_retransmit=0 bytes_invalid=0 send_seq=18133 receive_seq=18133 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15604 bytes_read=49954 bytes_retransmit=0 bytes_invalid=0 send_seq=2575 receive_seq=2575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999181  heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.62 cputime=229.409 memavail=698404 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.8 pwm=0.000
Stats 2839.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=324365 bytes_read=799698 bytes_retransmit=0 bytes_invalid=0 send_seq=18148 receive_seq=18147 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=15610 bytes_read=49970 bytes_retransmit=0 bytes_invalid=0 send_seq=2576 receive_seq=2576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999233  heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.62 cputime=229.537 memavail=698452 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2840.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=324557 bytes_read=800191 bytes_retransmit=0 bytes_invalid=0 send_seq=18162 receive_seq=18161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15616 bytes_read=49999 bytes_retransmit=0 bytes_invalid=0 send_seq=2577 receive_seq=2577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999269  heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.62 cputime=229.657 memavail=698452 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2841.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=324747 bytes_read=800634 bytes_retransmit=0 bytes_invalid=0 send_seq=18174 receive_seq=18173 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15622 bytes_read=50015 bytes_retransmit=0 bytes_invalid=0 send_seq=2578 receive_seq=2578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999302  heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.73 cputime=229.780 memavail=698324 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2842.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=324923 bytes_read=801067 bytes_retransmit=0 bytes_invalid=0 send_seq=18186 receive_seq=18186 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15628 bytes_read=50031 bytes_retransmit=0 bytes_invalid=0 send_seq=2579 receive_seq=2579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999326  heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.73 cputime=229.887 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2843.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=325139 bytes_read=801569 bytes_retransmit=0 bytes_invalid=0 send_seq=18201 receive_seq=18201 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15640 bytes_read=50063 bytes_retransmit=0 bytes_invalid=0 send_seq=2581 receive_seq=2581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999308  heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.73 cputime=230.010 memavail=698456 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2844.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=325334 bytes_read=802044 bytes_retransmit=0 bytes_invalid=0 send_seq=18215 receive_seq=18215 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15646 bytes_read=50079 bytes_retransmit=0 bytes_invalid=0 send_seq=2582 receive_seq=2582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999360  heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.73 cputime=230.132 memavail=698512 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=26.9 pwm=0.000
Stats 2845.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=325561 bytes_read=802568 bytes_retransmit=0 bytes_invalid=0 send_seq=18233 receive_seq=18233 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15652 bytes_read=50108 bytes_retransmit=0 bytes_invalid=0 send_seq=2583 receive_seq=2583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999416  heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.73 cputime=230.252 memavail=698724 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2846.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=325748 bytes_read=803056 bytes_retransmit=0 bytes_invalid=0 send_seq=18246 receive_seq=18246 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15658 bytes_read=50124 bytes_retransmit=0 bytes_invalid=0 send_seq=2584 receive_seq=2584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999398  heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.2 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.75 cputime=230.367 memavail=698716 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2847.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=325962 bytes_read=803547 bytes_retransmit=0 bytes_invalid=0 send_seq=18261 receive_seq=18261 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15664 bytes_read=50140 bytes_retransmit=0 bytes_invalid=0 send_seq=2585 receive_seq=2585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999380  heater_bed: target=60 temp=60.0 pwm=0.212 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.75 cputime=230.492 memavail=698704 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2848.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=326264 bytes_read=804214 bytes_retransmit=0 bytes_invalid=0 send_seq=18287 receive_seq=18287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15670 bytes_read=50156 bytes_retransmit=0 bytes_invalid=0 send_seq=2586 receive_seq=2586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999373  heater_bed: target=60 temp=60.1 pwm=0.129 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.75 cputime=230.637 memavail=698720 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2849.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=326443 bytes_read=804686 bytes_retransmit=0 bytes_invalid=0 send_seq=18299 receive_seq=18299 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15676 bytes_read=50172 bytes_retransmit=0 bytes_invalid=0 send_seq=2587 receive_seq=2587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999361  heater_bed: target=60 temp=60.1 pwm=0.129 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.1 sysload=0.75 cputime=230.749 memavail=698720 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2850.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=326622 bytes_read=805129 bytes_retransmit=0 bytes_invalid=0 send_seq=18311 receive_seq=18311 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15682 bytes_read=50201 bytes_retransmit=0 bytes_invalid=0 send_seq=2588 receive_seq=2588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999345  heater_bed: target=60 temp=60.1 pwm=0.129 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.75 cputime=230.862 memavail=698688 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2851.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=326809 bytes_read=805572 bytes_retransmit=0 bytes_invalid=0 send_seq=18324 receive_seq=18323 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15688 bytes_read=50217 bytes_retransmit=0 bytes_invalid=0 send_seq=2589 receive_seq=2589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999443  heater_bed: target=60 temp=60.2 pwm=0.129 raspberry_pi: temp=39.2 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.77 cputime=230.981 memavail=698728 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2852.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=327019 bytes_read=806069 bytes_retransmit=0 bytes_invalid=0 send_seq=18338 receive_seq=18337 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15694 bytes_read=50233 bytes_retransmit=0 bytes_invalid=0 send_seq=2590 receive_seq=2590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999404  heater_bed: target=60 temp=60.2 pwm=0.149 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.77 cputime=231.095 memavail=698728 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2853.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=327203 bytes_read=806518 bytes_retransmit=0 bytes_invalid=0 send_seq=18351 receive_seq=18351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15700 bytes_read=50249 bytes_retransmit=0 bytes_invalid=0 send_seq=2591 receive_seq=2591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999358  heater_bed: target=60 temp=60.1 pwm=0.149 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.1 sysload=0.77 cputime=231.195 memavail=698732 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2854.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=327420 bytes_read=806982 bytes_retransmit=0 bytes_invalid=0 send_seq=18366 receive_seq=18365 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=15706 bytes_read=50265 bytes_retransmit=0 bytes_invalid=0 send_seq=2592 receive_seq=2592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999370  heater_bed: target=60 temp=60.1 pwm=0.217 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.77 cputime=231.326 memavail=698732 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2855.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=327620 bytes_read=807464 bytes_retransmit=0 bytes_invalid=0 send_seq=18379 receive_seq=18379 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15712 bytes_read=50294 bytes_retransmit=0 bytes_invalid=0 send_seq=2593 receive_seq=2593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999332  heater_bed: target=60 temp=60.1 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.1 sysload=0.77 cputime=231.450 memavail=698380 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2856.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=327823 bytes_read=807951 bytes_retransmit=0 bytes_invalid=0 send_seq=18394 receive_seq=18394 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15718 bytes_read=50310 bytes_retransmit=0 bytes_invalid=0 send_seq=2594 receive_seq=2594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999315  heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.79 cputime=231.564 memavail=698488 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2857.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=328002 bytes_read=808409 bytes_retransmit=0 bytes_invalid=0 send_seq=18406 receive_seq=18406 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15724 bytes_read=50326 bytes_retransmit=0 bytes_invalid=0 send_seq=2595 receive_seq=2595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999344  heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.79 cputime=231.677 memavail=698488 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2858.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=328205 bytes_read=808929 bytes_retransmit=0 bytes_invalid=0 send_seq=18421 receive_seq=18421 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15730 bytes_read=50342 bytes_retransmit=0 bytes_invalid=0 send_seq=2596 receive_seq=2596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999409  heater_bed: target=60 temp=59.9 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.79 cputime=231.797 memavail=698488 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2859.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=328400 bytes_read=809362 bytes_retransmit=0 bytes_invalid=0 send_seq=18434 receive_seq=18434 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15736 bytes_read=50358 bytes_retransmit=0 bytes_invalid=0 send_seq=2597 receive_seq=2597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999374  heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.79 cputime=231.913 memavail=698460 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.0 pwm=0.000
Stats 2860.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=328592 bytes_read=809844 bytes_retransmit=0 bytes_invalid=0 send_seq=18448 receive_seq=18448 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15742 bytes_read=50387 bytes_retransmit=0 bytes_invalid=0 send_seq=2598 receive_seq=2598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999372  heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.79 cputime=232.043 memavail=698492 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2861.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=328838 bytes_read=810367 bytes_retransmit=0 bytes_invalid=0 send_seq=18466 receive_seq=18465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15748 bytes_read=50403 bytes_retransmit=0 bytes_invalid=0 send_seq=2599 receive_seq=2599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999364  heater_bed: target=60 temp=59.9 pwm=0.174 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.81 cputime=232.164 memavail=698492 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2862.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=329038 bytes_read=810824 bytes_retransmit=0 bytes_invalid=0 send_seq=18481 receive_seq=18480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15754 bytes_read=50419 bytes_retransmit=0 bytes_invalid=0 send_seq=2600 receive_seq=2600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999326  heater_bed: target=60 temp=59.9 pwm=0.174 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.81 cputime=232.283 memavail=698488 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2863.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=329254 bytes_read=811367 bytes_retransmit=0 bytes_invalid=0 send_seq=18498 receive_seq=18497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15760 bytes_read=50435 bytes_retransmit=0 bytes_invalid=0 send_seq=2601 receive_seq=2601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999292  heater_bed: target=60 temp=59.9 pwm=0.174 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.81 cputime=232.408 memavail=698504 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2864.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=329452 bytes_read=811814 bytes_retransmit=0 bytes_invalid=0 send_seq=18510 receive_seq=18510 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=15766 bytes_read=50451 bytes_retransmit=0 bytes_invalid=0 send_seq=2602 receive_seq=2602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999299  heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.1 sysload=0.81 cputime=232.511 memavail=698504 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2865.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=329637 bytes_read=812258 bytes_retransmit=0 bytes_invalid=0 send_seq=18523 receive_seq=18523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15772 bytes_read=50480 bytes_retransmit=0 bytes_invalid=0 send_seq=2603 receive_seq=2603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999244  heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=39.2 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.81 cputime=232.637 memavail=698992 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2866.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=329816 bytes_read=812730 bytes_retransmit=0 bytes_invalid=0 send_seq=18535 receive_seq=18535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15778 bytes_read=50496 bytes_retransmit=0 bytes_invalid=0 send_seq=2604 receive_seq=2604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999183  heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.82 cputime=232.756 memavail=699008 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2867.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=329995 bytes_read=813173 bytes_retransmit=0 bytes_invalid=0 send_seq=18547 receive_seq=18547 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15784 bytes_read=50512 bytes_retransmit=0 bytes_invalid=0 send_seq=2605 receive_seq=2605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999205  heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.3 sysload=0.82 cputime=232.868 memavail=699008 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Stats 2868.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=330190 bytes_read=813621 bytes_retransmit=0 bytes_invalid=0 send_seq=18560 receive_seq=18560 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15790 bytes_read=50528 bytes_retransmit=0 bytes_invalid=0 send_seq=2606 receive_seq=2606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999202  heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.82 cputime=232.982 memavail=698516 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2869.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=330377 bytes_read=814093 bytes_retransmit=0 bytes_invalid=0 send_seq=18573 receive_seq=18572 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=15796 bytes_read=50544 bytes_retransmit=0 bytes_invalid=0 send_seq=2607 receive_seq=2607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999195  heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.82 cputime=233.109 memavail=698516 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2870.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=330556 bytes_read=814536 bytes_retransmit=0 bytes_invalid=0 send_seq=18585 receive_seq=18584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15802 bytes_read=50573 bytes_retransmit=0 bytes_invalid=0 send_seq=2608 receive_seq=2608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999195  heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.82 cputime=233.219 memavail=698516 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.3 pwm=0.000
Stats 2871.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=330735 bytes_read=814964 bytes_retransmit=0 bytes_invalid=0 send_seq=18597 receive_seq=18596 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15808 bytes_read=50589 bytes_retransmit=0 bytes_invalid=0 send_seq=2609 receive_seq=2609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999250  heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=36.2 chamber: temp=21.1 sysload=0.84 cputime=233.325 memavail=698768 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2872.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=330930 bytes_read=815461 bytes_retransmit=0 bytes_invalid=0 send_seq=18610 receive_seq=18610 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15814 bytes_read=50605 bytes_retransmit=0 bytes_invalid=0 send_seq=2610 receive_seq=2610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999243  heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=0.84 cputime=233.440 memavail=698768 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2873.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=331120 bytes_read=815899 bytes_retransmit=0 bytes_invalid=0 send_seq=18622 receive_seq=18621 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15820 bytes_read=50621 bytes_retransmit=0 bytes_invalid=0 send_seq=2611 receive_seq=2611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999260  heater_bed: target=60 temp=59.9 pwm=0.192 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.84 cputime=233.548 memavail=698768 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2874.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=331299 bytes_read=816332 bytes_retransmit=0 bytes_invalid=0 send_seq=18634 receive_seq=18634 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15826 bytes_read=50637 bytes_retransmit=0 bytes_invalid=0 send_seq=2612 receive_seq=2612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999272  heater_bed: target=60 temp=60.0 pwm=0.192 raspberry_pi: temp=39.2 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.84 cputime=233.659 memavail=698180 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2875.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=331499 bytes_read=816829 bytes_retransmit=0 bytes_invalid=0 send_seq=18648 receive_seq=18648 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15832 bytes_read=50666 bytes_retransmit=0 bytes_invalid=0 send_seq=2613 receive_seq=2613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999246  heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.2 sysload=0.84 cputime=233.774 memavail=698528 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2876.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=331675 bytes_read=817257 bytes_retransmit=0 bytes_invalid=0 send_seq=18660 receive_seq=18660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15838 bytes_read=50682 bytes_retransmit=0 bytes_invalid=0 send_seq=2614 receive_seq=2614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999225  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=0.85 cputime=233.875 memavail=698536 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.2 pwm=0.000
Stats 2877.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=331854 bytes_read=817700 bytes_retransmit=0 bytes_invalid=0 send_seq=18672 receive_seq=18672 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15844 bytes_read=50698 bytes_retransmit=0 bytes_invalid=0 send_seq=2615 receive_seq=2615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999338  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=0.85 cputime=233.988 memavail=698556 print_time=2281.746 buffer_time=0.000 print_stall=0 extruder: target=0 temp=27.1 pwm=0.000
Heater extruder approaching new target of 220.000
Stats 2878.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=332699 bytes_read=818237 bytes_retransmit=0 bytes_invalid=0 send_seq=18697 receive_seq=18697 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15850 bytes_read=50714 bytes_retransmit=0 bytes_invalid=0 send_seq=2616 receive_seq=2616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999293  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.85 cputime=234.125 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=27.2 pwm=1.000
Stats 2879.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=333399 bytes_read=818730 bytes_retransmit=0 bytes_invalid=0 send_seq=18719 receive_seq=18719 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001344 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=15856 bytes_read=50730 bytes_retransmit=0 bytes_invalid=0 send_seq=2617 receive_seq=2617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999265  heater_bed: target=60 temp=60.2 pwm=0.124 raspberry_pi: temp=39.2 mcu_temp: temp=36.2 chamber: temp=21.2 sysload=0.85 cputime=234.255 memavail=698540 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=28.3 pwm=1.000
Stats 2880.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=333675 bytes_read=819188 bytes_retransmit=0 bytes_invalid=0 send_seq=18734 receive_seq=18734 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15862 bytes_read=50759 bytes_retransmit=0 bytes_invalid=0 send_seq=2618 receive_seq=2618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999266  heater_bed: target=60 temp=60.2 pwm=0.124 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=0.85 cputime=234.375 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=31.2 pwm=1.000
Stats 2881.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=333974 bytes_read=819680 bytes_retransmit=0 bytes_invalid=0 send_seq=18750 receive_seq=18750 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15868 bytes_read=50775 bytes_retransmit=0 bytes_invalid=0 send_seq=2619 receive_seq=2619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999257  heater_bed: target=60 temp=60.2 pwm=0.124 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.94 cputime=234.496 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=37.2 pwm=1.000
Stats 2882.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=334266 bytes_read=820123 bytes_retransmit=0 bytes_invalid=0 send_seq=18765 receive_seq=18765 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15874 bytes_read=50791 bytes_retransmit=0 bytes_invalid=0 send_seq=2620 receive_seq=2620 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999261  heater_bed: target=60 temp=60.2 pwm=0.124 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.94 cputime=234.623 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=42.3 pwm=1.000
Stats 2883.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=334580 bytes_read=820601 bytes_retransmit=0 bytes_invalid=0 send_seq=18781 receive_seq=18781 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15880 bytes_read=50807 bytes_retransmit=0 bytes_invalid=0 send_seq=2621 receive_seq=2621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999265  heater_bed: target=60 temp=60.2 pwm=0.106 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=0.94 cputime=234.748 memavail=698552 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=47.6 pwm=1.000
Stats 2884.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=334883 bytes_read=821088 bytes_retransmit=0 bytes_invalid=0 send_seq=18796 receive_seq=18796 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15886 bytes_read=50823 bytes_retransmit=0 bytes_invalid=0 send_seq=2622 receive_seq=2622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999328  heater_bed: target=60 temp=60.2 pwm=0.155 raspberry_pi: temp=39.7 mcu_temp: temp=36.3 chamber: temp=21.3 sysload=0.94 cputime=234.869 memavail=698752 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=54.7 pwm=1.000
Stats 2885.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=335181 bytes_read=821531 bytes_retransmit=0 bytes_invalid=0 send_seq=18811 receive_seq=18811 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15892 bytes_read=50852 bytes_retransmit=0 bytes_invalid=0 send_seq=2623 receive_seq=2623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999332  heater_bed: target=60 temp=60.2 pwm=0.155 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=0.94 cputime=234.952 memavail=698804 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=59.7 pwm=1.000
Stats 2886.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=335474 bytes_read=821975 bytes_retransmit=0 bytes_invalid=0 send_seq=18826 receive_seq=18826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15898 bytes_read=50867 bytes_retransmit=0 bytes_invalid=0 send_seq=2624 receive_seq=2624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999290  heater_bed: target=60 temp=60.2 pwm=0.155 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=1.03 cputime=235.067 memavail=698812 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=64.7 pwm=1.000
Stats 2887.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000014 mcu_task_stddev=0.000032 bytes_write=335793 bytes_read=822459 bytes_retransmit=0 bytes_invalid=0 send_seq=18842 receive_seq=18842 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15904 bytes_read=50882 bytes_retransmit=0 bytes_invalid=0 send_seq=2625 receive_seq=2625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999274  heater_bed: target=60 temp=60.1 pwm=0.205 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=1.03 cputime=235.187 memavail=698812 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=70.9 pwm=1.000
Stats 2888.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=336074 bytes_read=822917 bytes_retransmit=0 bytes_invalid=0 send_seq=18857 receive_seq=18857 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15910 bytes_read=50897 bytes_retransmit=0 bytes_invalid=0 send_seq=2626 receive_seq=2626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999295  heater_bed: target=60 temp=60.1 pwm=0.205 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=1.03 cputime=235.306 memavail=698812 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=75.4 pwm=1.000
Stats 2889.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=336433 bytes_read=823409 bytes_retransmit=0 bytes_invalid=0 send_seq=18874 receive_seq=18873 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=15916 bytes_read=50912 bytes_retransmit=0 bytes_invalid=0 send_seq=2627 receive_seq=2627 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999337  heater_bed: target=60 temp=60.1 pwm=0.205 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=1.03 cputime=235.434 memavail=698572 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=79.7 pwm=1.000
Stats 2890.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=336746 bytes_read=823872 bytes_retransmit=0 bytes_invalid=0 send_seq=18890 receive_seq=18889 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15922 bytes_read=50940 bytes_retransmit=0 bytes_invalid=0 send_seq=2628 receive_seq=2628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999328  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=1.03 cputime=235.547 memavail=698572 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=85.3 pwm=1.000
Stats 2891.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=337033 bytes_read=824320 bytes_retransmit=0 bytes_invalid=0 send_seq=18905 receive_seq=18905 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15928 bytes_read=50956 bytes_retransmit=0 bytes_invalid=0 send_seq=2629 receive_seq=2629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999310  heater_bed: target=60 temp=60.0 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=1.03 cputime=235.664 memavail=698572 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=89.3 pwm=1.000
Stats 2892.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=337320 bytes_read=824817 bytes_retransmit=0 bytes_invalid=0 send_seq=18920 receive_seq=18919 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15934 bytes_read=50972 bytes_retransmit=0 bytes_invalid=0 send_seq=2630 receive_seq=2630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999279  heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=1.03 cputime=235.788 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=93.2 pwm=1.000
Stats 2893.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=337548 bytes_read=825280 bytes_retransmit=0 bytes_invalid=0 send_seq=18935 receive_seq=18935 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15940 bytes_read=50988 bytes_retransmit=0 bytes_invalid=0 send_seq=2631 receive_seq=2631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999254  heater_bed: target=60 temp=60.0 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.2 sysload=1.03 cputime=235.902 memavail=698576 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=98.3 pwm=1.000
Stats 2894.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=337897 bytes_read=825733 bytes_retransmit=0 bytes_invalid=0 send_seq=18953 receive_seq=18952 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=15946 bytes_read=51004 bytes_retransmit=0 bytes_invalid=0 send_seq=2632 receive_seq=2632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999256  heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=1.03 cputime=236.020 memavail=698768 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=102.0 pwm=1.000
Stats 2895.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=338194 bytes_read=826225 bytes_retransmit=0 bytes_invalid=0 send_seq=18968 receive_seq=18968 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=15952 bytes_read=51033 bytes_retransmit=0 bytes_invalid=0 send_seq=2633 receive_seq=2633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999271  heater_bed: target=60 temp=60.1 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=1.03 cputime=236.125 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=105.6 pwm=1.000
Stats 2896.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=338452 bytes_read=826683 bytes_retransmit=0 bytes_invalid=0 send_seq=18983 receive_seq=18983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=15964 bytes_read=51065 bytes_retransmit=0 bytes_invalid=0 send_seq=2635 receive_seq=2635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999246  heater_bed: target=60 temp=60.1 pwm=0.110 raspberry_pi: temp=39.2 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=1.02 cputime=236.248 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=110.4 pwm=1.000
Stats 2897.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=338739 bytes_read=827131 bytes_retransmit=0 bytes_invalid=0 send_seq=18999 receive_seq=18999 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=15970 bytes_read=51081 bytes_retransmit=0 bytes_invalid=0 send_seq=2636 receive_seq=2636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999284  heater_bed: target=60 temp=60.1 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=1.02 cputime=236.374 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=113.9 pwm=1.000
Stats 2898.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=339036 bytes_read=827633 bytes_retransmit=0 bytes_invalid=0 send_seq=19014 receive_seq=19014 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=15976 bytes_read=51097 bytes_retransmit=0 bytes_invalid=0 send_seq=2637 receive_seq=2637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999286  heater_bed: target=60 temp=60.1 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=1.02 cputime=236.487 memavail=699092 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=117.4 pwm=1.000
Stats 2899.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=339399 bytes_read=828101 bytes_retransmit=0 bytes_invalid=0 send_seq=19032 receive_seq=19031 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=15982 bytes_read=51113 bytes_retransmit=0 bytes_invalid=0 send_seq=2638 receive_seq=2638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999348  heater_bed: target=60 temp=60.1 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=1.02 cputime=236.613 memavail=699084 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=121.9 pwm=1.000
Stats 2900.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=339691 bytes_read=828541 bytes_retransmit=0 bytes_invalid=0 send_seq=19047 receive_seq=19046 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15988 bytes_read=51142 bytes_retransmit=0 bytes_invalid=0 send_seq=2639 receive_seq=2639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999354  heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=1.02 cputime=236.728 memavail=699084 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=125.2 pwm=1.000
Stats 2901.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=339978 bytes_read=829035 bytes_retransmit=0 bytes_invalid=0 send_seq=19064 receive_seq=19063 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=15994 bytes_read=51158 bytes_retransmit=0 bytes_invalid=0 send_seq=2640 receive_seq=2640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999373  heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=0.94 cputime=236.845 memavail=699092 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=128.5 pwm=1.000
Stats 2902.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=340208 bytes_read=829499 bytes_retransmit=0 bytes_invalid=0 send_seq=19078 receive_seq=19077 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16000 bytes_read=51174 bytes_retransmit=0 bytes_invalid=0 send_seq=2641 receive_seq=2641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999340  heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.94 cputime=236.964 memavail=699092 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=132.8 pwm=1.000
Stats 2903.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=340516 bytes_read=829949 bytes_retransmit=0 bytes_invalid=0 send_seq=19094 receive_seq=19094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16006 bytes_read=51190 bytes_retransmit=0 bytes_invalid=0 send_seq=2642 receive_seq=2642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999350  heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.94 cputime=237.078 memavail=699092 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=136.0 pwm=1.000
Stats 2904.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=340827 bytes_read=830443 bytes_retransmit=0 bytes_invalid=0 send_seq=19111 receive_seq=19111 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16012 bytes_read=51206 bytes_retransmit=0 bytes_invalid=0 send_seq=2643 receive_seq=2643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999353  heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.94 cputime=237.197 memavail=698512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=139.2 pwm=1.000
Stats 2905.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=341108 bytes_read=830897 bytes_retransmit=0 bytes_invalid=0 send_seq=19126 receive_seq=19126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16018 bytes_read=51235 bytes_retransmit=0 bytes_invalid=0 send_seq=2644 receive_seq=2644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999294  heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=0.94 cputime=237.316 memavail=698592 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=143.4 pwm=1.000
Stats 2906.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=341411 bytes_read=831357 bytes_retransmit=0 bytes_invalid=0 send_seq=19142 receive_seq=19142 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16024 bytes_read=51251 bytes_retransmit=0 bytes_invalid=0 send_seq=2645 receive_seq=2645 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999277  heater_bed: target=60 temp=60.1 pwm=0.150 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.1 sysload=0.87 cputime=237.445 memavail=698592 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=146.5 pwm=1.000
Stats 2907.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=341729 bytes_read=831870 bytes_retransmit=0 bytes_invalid=0 send_seq=19160 receive_seq=19160 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16030 bytes_read=51267 bytes_retransmit=0 bytes_invalid=0 send_seq=2646 receive_seq=2646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999274  heater_bed: target=60 temp=60.1 pwm=0.099 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.87 cputime=237.575 memavail=698556 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=150.5 pwm=1.000
Stats 2908.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=342026 bytes_read=832315 bytes_retransmit=0 bytes_invalid=0 send_seq=19176 receive_seq=19176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16036 bytes_read=51283 bytes_retransmit=0 bytes_invalid=0 send_seq=2647 receive_seq=2647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999257  heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.87 cputime=237.695 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=153.5 pwm=1.000
Stats 2909.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=342321 bytes_read=832755 bytes_retransmit=0 bytes_invalid=0 send_seq=19191 receive_seq=19191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16042 bytes_read=51299 bytes_retransmit=0 bytes_invalid=0 send_seq=2648 receive_seq=2648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999293  heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=39.2 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=0.87 cputime=237.802 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=156.4 pwm=1.000
Stats 2910.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=342610 bytes_read=833236 bytes_retransmit=0 bytes_invalid=0 send_seq=19207 receive_seq=19206 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=16048 bytes_read=51328 bytes_retransmit=0 bytes_invalid=0 send_seq=2649 receive_seq=2649 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999323  heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.87 cputime=237.929 memavail=698564 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=160.4 pwm=1.000
Stats 2911.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=342941 bytes_read=833681 bytes_retransmit=0 bytes_invalid=0 send_seq=19224 receive_seq=19223 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=16054 bytes_read=51344 bytes_retransmit=0 bytes_invalid=0 send_seq=2650 receive_seq=2650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999364  heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=39.2 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=0.80 cputime=238.046 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=163.2 pwm=1.000
Stats 2912.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=343205 bytes_read=834156 bytes_retransmit=0 bytes_invalid=0 send_seq=19240 receive_seq=19239 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=16060 bytes_read=51360 bytes_retransmit=0 bytes_invalid=0 send_seq=2651 receive_seq=2651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999343  heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.80 cputime=238.159 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=166.1 pwm=1.000
Stats 2913.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=343491 bytes_read=834644 bytes_retransmit=0 bytes_invalid=0 send_seq=19256 receive_seq=19255 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=16066 bytes_read=51376 bytes_retransmit=0 bytes_invalid=0 send_seq=2652 receive_seq=2652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999345  heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=39.2 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.80 cputime=238.269 memavail=698616 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=169.8 pwm=1.000
Stats 2914.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=343745 bytes_read=835089 bytes_retransmit=0 bytes_invalid=0 send_seq=19271 receive_seq=19271 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=16072 bytes_read=51392 bytes_retransmit=0 bytes_invalid=0 send_seq=2653 receive_seq=2653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999351  heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.80 cputime=238.378 memavail=698540 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=172.6 pwm=1.000
Stats 2915.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=344054 bytes_read=835549 bytes_retransmit=0 bytes_invalid=0 send_seq=19287 receive_seq=19287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16078 bytes_read=51421 bytes_retransmit=0 bytes_invalid=0 send_seq=2654 receive_seq=2654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999320  heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=36.4 chamber: temp=21.3 sysload=0.80 cputime=238.482 memavail=698540 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=175.4 pwm=1.000
Stats 2916.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=344337 bytes_read=836037 bytes_retransmit=0 bytes_invalid=0 send_seq=19303 receive_seq=19303 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16084 bytes_read=51437 bytes_retransmit=0 bytes_invalid=0 send_seq=2655 receive_seq=2655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999369  heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.81 cputime=238.610 memavail=698616 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=179.0 pwm=1.000
Stats 2917.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=344619 bytes_read=836508 bytes_retransmit=0 bytes_invalid=0 send_seq=19319 receive_seq=19319 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16090 bytes_read=51453 bytes_retransmit=0 bytes_invalid=0 send_seq=2656 receive_seq=2656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999357  heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.81 cputime=238.729 memavail=698616 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=181.7 pwm=1.000
Stats 2918.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=344918 bytes_read=836997 bytes_retransmit=0 bytes_invalid=0 send_seq=19335 receive_seq=19335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16096 bytes_read=51469 bytes_retransmit=0 bytes_invalid=0 send_seq=2657 receive_seq=2657 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999299  heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.81 cputime=238.849 memavail=698616 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=184.4 pwm=1.000
Stats 2919.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=345213 bytes_read=837456 bytes_retransmit=0 bytes_invalid=0 send_seq=19351 receive_seq=19351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16102 bytes_read=51485 bytes_retransmit=0 bytes_invalid=0 send_seq=2658 receive_seq=2658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999278  heater_bed: target=60 temp=60.1 pwm=0.170 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.81 cputime=238.956 memavail=698628 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=187.9 pwm=1.000
Stats 2920.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=345529 bytes_read=837906 bytes_retransmit=0 bytes_invalid=0 send_seq=19368 receive_seq=19368 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=16108 bytes_read=51514 bytes_retransmit=0 bytes_invalid=0 send_seq=2659 receive_seq=2659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999243  heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.81 cputime=239.098 memavail=698628 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=190.6 pwm=1.000
Stats 2921.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=345854 bytes_read=838400 bytes_retransmit=0 bytes_invalid=0 send_seq=19386 receive_seq=19385 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=41 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=16114 bytes_read=51530 bytes_retransmit=0 bytes_invalid=0 send_seq=2660 receive_seq=2660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999213  heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.75 cputime=239.218 memavail=698628 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=193.1 pwm=1.000
Stats 2922.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=346158 bytes_read=838859 bytes_retransmit=0 bytes_invalid=0 send_seq=19402 receive_seq=19401 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=13 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=16120 bytes_read=51546 bytes_retransmit=0 bytes_invalid=0 send_seq=2661 receive_seq=2661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999217  heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.75 cputime=239.336 memavail=698640 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=196.6 pwm=1.000
Stats 2923.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=346387 bytes_read=839319 bytes_retransmit=0 bytes_invalid=0 send_seq=19417 receive_seq=19417 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=16126 bytes_read=51562 bytes_retransmit=0 bytes_invalid=0 send_seq=2662 receive_seq=2662 retransmit_seq=0 srtt=0.000 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999209  heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.75 cputime=239.440 memavail=698648 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.1 pwm=1.000
Stats 2924.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=346684 bytes_read=839808 bytes_retransmit=0 bytes_invalid=0 send_seq=19433 receive_seq=19433 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=16132 bytes_read=51578 bytes_retransmit=0 bytes_invalid=0 send_seq=2663 receive_seq=2663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999227  heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=0.75 cputime=239.553 memavail=698648 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.5 pwm=1.000
Stats 2925.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=347045 bytes_read=840267 bytes_retransmit=0 bytes_invalid=0 send_seq=19450 receive_seq=19449 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16138 bytes_read=51607 bytes_retransmit=0 bytes_invalid=0 send_seq=2664 receive_seq=2664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999299  heater_bed: target=60 temp=60.0 pwm=0.197 raspberry_pi: temp=39.2 mcu_temp: temp=36.5 chamber: temp=21.2 sysload=0.75 cputime=239.677 memavail=698372 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.8 pwm=1.000
Stats 2926.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=347321 bytes_read=840712 bytes_retransmit=0 bytes_invalid=0 send_seq=19465 receive_seq=19465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16144 bytes_read=51623 bytes_retransmit=0 bytes_invalid=0 send_seq=2665 receive_seq=2665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999294  heater_bed: target=60 temp=59.9 pwm=0.197 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.69 cputime=239.791 memavail=698372 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=207.2 pwm=1.000
Stats 2927.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=347656 bytes_read=841231 bytes_retransmit=0 bytes_invalid=0 send_seq=19484 receive_seq=19484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16150 bytes_read=51639 bytes_retransmit=0 bytes_invalid=0 send_seq=2666 receive_seq=2666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999292  heater_bed: target=60 temp=59.9 pwm=0.183 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.69 cputime=239.909 memavail=698396 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=209.7 pwm=0.916
Stats 2928.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=348012 bytes_read=841710 bytes_retransmit=0 bytes_invalid=0 send_seq=19504 receive_seq=19504 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16156 bytes_read=51655 bytes_retransmit=0 bytes_invalid=0 send_seq=2667 receive_seq=2667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999311  heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.69 cputime=240.025 memavail=698400 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.9 pwm=0.686
Stats 2929.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=348353 bytes_read=842160 bytes_retransmit=0 bytes_invalid=0 send_seq=19522 receive_seq=19521 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16162 bytes_read=51671 bytes_retransmit=0 bytes_invalid=0 send_seq=2668 receive_seq=2668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999292  heater_bed: target=60 temp=59.9 pwm=0.197 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.69 cputime=240.143 memavail=698400 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=215.1 pwm=0.566
Stats 2930.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=348649 bytes_read=842649 bytes_retransmit=0 bytes_invalid=0 send_seq=19538 receive_seq=19537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16168 bytes_read=51700 bytes_retransmit=0 bytes_invalid=0 send_seq=2669 receive_seq=2669 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999312  heater_bed: target=60 temp=59.9 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.69 cputime=240.254 memavail=697156 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.1 pwm=0.387
Heater extruder within range of 220.000
Stats 2931.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=348952 bytes_read=843118 bytes_retransmit=0 bytes_invalid=0 send_seq=19555 receive_seq=19555 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16174 bytes_read=51716 bytes_retransmit=0 bytes_invalid=0 send_seq=2670 receive_seq=2670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999269  heater_bed: target=60 temp=59.9 pwm=0.202 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.2 sysload=0.71 cputime=240.336 memavail=698384 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.2 pwm=0.306
Stats 2932.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=349357 bytes_read=843588 bytes_retransmit=0 bytes_invalid=0 send_seq=19573 receive_seq=19573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16180 bytes_read=51732 bytes_retransmit=0 bytes_invalid=0 send_seq=2671 receive_seq=2671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999220  heater_bed: target=60 temp=59.9 pwm=0.147 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.71 cputime=240.448 memavail=698384 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.306
Stats 2933.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=349655 bytes_read=844066 bytes_retransmit=0 bytes_invalid=0 send_seq=19588 receive_seq=19588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16186 bytes_read=51748 bytes_retransmit=0 bytes_invalid=0 send_seq=2672 receive_seq=2672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999248  heater_bed: target=60 temp=59.9 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.71 cputime=240.560 memavail=698400 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.398
Stats 2934.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=349855 bytes_read=844501 bytes_retransmit=0 bytes_invalid=0 send_seq=19602 receive_seq=19602 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16192 bytes_read=51764 bytes_retransmit=0 bytes_invalid=0 send_seq=2673 receive_seq=2673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999259  heater_bed: target=60 temp=59.9 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.71 cputime=240.659 memavail=698052 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.485
Stats 2935.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=350120 bytes_read=844946 bytes_retransmit=0 bytes_invalid=0 send_seq=19618 receive_seq=19618 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=16198 bytes_read=51793 bytes_retransmit=0 bytes_invalid=0 send_seq=2674 receive_seq=2674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999237  heater_bed: target=60 temp=59.9 pwm=0.201 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.71 cputime=240.783 memavail=698160 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.540
Stats 2936.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=350320 bytes_read=845425 bytes_retransmit=0 bytes_invalid=0 send_seq=19632 receive_seq=19632 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=16204 bytes_read=51809 bytes_retransmit=0 bytes_invalid=0 send_seq=2675 receive_seq=2675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999309  heater_bed: target=60 temp=59.8 pwm=0.201 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.74 cputime=240.895 memavail=698160 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.590
Stats 2937.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=350520 bytes_read=845874 bytes_retransmit=0 bytes_invalid=0 send_seq=19646 receive_seq=19646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=16210 bytes_read=51825 bytes_retransmit=0 bytes_invalid=0 send_seq=2676 receive_seq=2676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999308  heater_bed: target=60 temp=59.8 pwm=0.201 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.74 cputime=241.005 memavail=698172 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.519
Stats 2938.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=350742 bytes_read=846324 bytes_retransmit=0 bytes_invalid=0 send_seq=19660 receive_seq=19660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=16216 bytes_read=51841 bytes_retransmit=0 bytes_invalid=0 send_seq=2677 receive_seq=2677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999365  heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.74 cputime=241.116 memavail=698172 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.390
Stats 2939.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=350958 bytes_read=846808 bytes_retransmit=0 bytes_invalid=0 send_seq=19675 receive_seq=19675 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=16222 bytes_read=51857 bytes_retransmit=0 bytes_invalid=0 send_seq=2678 receive_seq=2678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999395  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.74 cputime=241.217 memavail=698172 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.8 pwm=0.236
Stats 2940.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=351340 bytes_read=847267 bytes_retransmit=0 bytes_invalid=0 send_seq=19693 receive_seq=19691 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=16228 bytes_read=51873 bytes_retransmit=0 bytes_invalid=0 send_seq=2679 receive_seq=2679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999389  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.74 cputime=241.348 memavail=698172 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.3 pwm=0.152
Stats 2941.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=351547 bytes_read=847722 bytes_retransmit=0 bytes_invalid=0 send_seq=19706 receive_seq=19706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16234 bytes_read=51902 bytes_retransmit=0 bytes_invalid=0 send_seq=2680 receive_seq=2680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999460  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.4 sysload=0.76 cputime=241.461 memavail=698172 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.5 pwm=0.152
Stats 2942.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=351773 bytes_read=848205 bytes_retransmit=0 bytes_invalid=0 send_seq=19721 receive_seq=19721 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16240 bytes_read=51918 bytes_retransmit=0 bytes_invalid=0 send_seq=2681 receive_seq=2681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999380  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=36.5 chamber: temp=21.3 sysload=0.76 cputime=241.575 memavail=698164 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=222.2 pwm=0.253
Stats 2943.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=352106 bytes_read=848665 bytes_retransmit=0 bytes_invalid=0 send_seq=19738 receive_seq=19737 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16246 bytes_read=51934 bytes_retransmit=0 bytes_invalid=0 send_seq=2682 receive_seq=2682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999387  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.76 cputime=241.690 memavail=698104 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.6 pwm=0.354
Stats 2944.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=352319 bytes_read=849110 bytes_retransmit=0 bytes_invalid=0 send_seq=19750 receive_seq=19750 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16252 bytes_read=51950 bytes_retransmit=0 bytes_invalid=0 send_seq=2683 receive_seq=2683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999357  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.76 cputime=241.787 memavail=698620 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.430
Stats 2945.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=352594 bytes_read=849598 bytes_retransmit=0 bytes_invalid=0 send_seq=19766 receive_seq=19766 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16258 bytes_read=51966 bytes_retransmit=0 bytes_invalid=0 send_seq=2684 receive_seq=2684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999340  heater_bed: target=60 temp=60.1 pwm=0.171 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.2 sysload=0.76 cputime=241.899 memavail=698620 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.494
Stats 2946.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=352825 bytes_read=850043 bytes_retransmit=0 bytes_invalid=0 send_seq=19782 receive_seq=19782 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16264 bytes_read=51995 bytes_retransmit=0 bytes_invalid=0 send_seq=2685 receive_seq=2685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999333  heater_bed: target=60 temp=60.1 pwm=0.137 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.2 sysload=0.78 cputime=242.009 memavail=698608 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.430
Stats 2947.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=353084 bytes_read=850498 bytes_retransmit=0 bytes_invalid=0 send_seq=19797 receive_seq=19797 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16270 bytes_read=52011 bytes_retransmit=0 bytes_invalid=0 send_seq=2686 receive_seq=2686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999332  heater_bed: target=60 temp=60.2 pwm=0.083 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.78 cputime=242.119 memavail=698680 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.343
Stats 2948.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=353349 bytes_read=851001 bytes_retransmit=0 bytes_invalid=0 send_seq=19813 receive_seq=19813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16276 bytes_read=52027 bytes_retransmit=0 bytes_invalid=0 send_seq=2687 receive_seq=2687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999284  heater_bed: target=60 temp=60.2 pwm=0.151 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.78 cputime=242.235 memavail=698680 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.0 pwm=0.195
Stats 2949.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=353544 bytes_read=851431 bytes_retransmit=0 bytes_invalid=0 send_seq=19826 receive_seq=19826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16282 bytes_read=52043 bytes_retransmit=0 bytes_invalid=0 send_seq=2688 receive_seq=2688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999300  heater_bed: target=60 temp=60.1 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.78 cputime=242.351 memavail=698692 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.3 pwm=0.195
Stats 2950.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=353744 bytes_read=851910 bytes_retransmit=0 bytes_invalid=0 send_seq=19840 receive_seq=19840 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16294 bytes_read=52075 bytes_retransmit=0 bytes_invalid=0 send_seq=2690 receive_seq=2690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999288  heater_bed: target=60 temp=60.1 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.78 cputime=242.472 memavail=698692 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.4 pwm=0.131
Stats 2951.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=353950 bytes_read=852354 bytes_retransmit=0 bytes_invalid=0 send_seq=19853 receive_seq=19853 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16300 bytes_read=52104 bytes_retransmit=0 bytes_invalid=0 send_seq=2691 receive_seq=2691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999431  heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.80 cputime=242.585 memavail=698692 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=221.2 pwm=0.218
Stats 2952.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=354161 bytes_read=852789 bytes_retransmit=0 bytes_invalid=0 send_seq=19867 receive_seq=19867 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16306 bytes_read=52120 bytes_retransmit=0 bytes_invalid=0 send_seq=2692 receive_seq=2692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999427  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.80 cputime=242.696 memavail=698876 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.8 pwm=0.289
Stats 2953.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=354377 bytes_read=853288 bytes_retransmit=0 bytes_invalid=0 send_seq=19882 receive_seq=19882 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16312 bytes_read=52136 bytes_retransmit=0 bytes_invalid=0 send_seq=2693 receive_seq=2693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999381  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.80 cputime=242.807 memavail=698956 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.417
Stats 2954.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=354626 bytes_read=853742 bytes_retransmit=0 bytes_invalid=0 send_seq=19897 receive_seq=19897 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16318 bytes_read=52152 bytes_retransmit=0 bytes_invalid=0 send_seq=2694 receive_seq=2694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999352  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.80 cputime=242.910 memavail=698352 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.500
Stats 2955.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=354821 bytes_read=854172 bytes_retransmit=0 bytes_invalid=0 send_seq=19910 receive_seq=19910 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16324 bytes_read=52168 bytes_retransmit=0 bytes_invalid=0 send_seq=2695 receive_seq=2695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999375  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.80 cputime=243.029 memavail=698452 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.434
Stats 2956.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=355037 bytes_read=854656 bytes_retransmit=0 bytes_invalid=0 send_seq=19925 receive_seq=19925 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16330 bytes_read=52197 bytes_retransmit=0 bytes_invalid=0 send_seq=2696 receive_seq=2696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999356  heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.81 cputime=243.131 memavail=698452 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.364
Stats 2957.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=355253 bytes_read=855102 bytes_retransmit=0 bytes_invalid=0 send_seq=19940 receive_seq=19940 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16336 bytes_read=52213 bytes_retransmit=0 bytes_invalid=0 send_seq=2697 receive_seq=2697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999356  heater_bed: target=60 temp=60.2 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.81 cputime=243.240 memavail=698452 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.238
Stats 2958.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=355453 bytes_read=855539 bytes_retransmit=0 bytes_invalid=0 send_seq=19954 receive_seq=19954 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16342 bytes_read=52229 bytes_retransmit=0 bytes_invalid=0 send_seq=2698 receive_seq=2698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999351  heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.81 cputime=243.354 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.166
Stats 2959.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=355637 bytes_read=856013 bytes_retransmit=0 bytes_invalid=0 send_seq=19967 receive_seq=19967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16348 bytes_read=52245 bytes_retransmit=0 bytes_invalid=0 send_seq=2699 receive_seq=2699 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999329  heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.81 cputime=243.468 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.166
Stats 2960.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=355902 bytes_read=856472 bytes_retransmit=0 bytes_invalid=0 send_seq=19983 receive_seq=19983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16354 bytes_read=52261 bytes_retransmit=0 bytes_invalid=0 send_seq=2700 receive_seq=2700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999303  heater_bed: target=60 temp=60.1 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.81 cputime=243.581 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.221
Stats 2961.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=356102 bytes_read=856907 bytes_retransmit=0 bytes_invalid=0 send_seq=19997 receive_seq=19997 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16360 bytes_read=52290 bytes_retransmit=0 bytes_invalid=0 send_seq=2701 receive_seq=2701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999308  heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.83 cputime=243.696 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.301
Stats 2962.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=356346 bytes_read=857386 bytes_retransmit=0 bytes_invalid=0 send_seq=20011 receive_seq=20011 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16366 bytes_read=52306 bytes_retransmit=0 bytes_invalid=0 send_seq=2702 receive_seq=2702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999326  heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.83 cputime=243.809 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.372
Stats 2963.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=356561 bytes_read=857855 bytes_retransmit=0 bytes_invalid=0 send_seq=20026 receive_seq=20026 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16372 bytes_read=52322 bytes_retransmit=0 bytes_invalid=0 send_seq=2703 receive_seq=2703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999335  heater_bed: target=60 temp=60.1 pwm=0.079 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.83 cputime=243.927 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.426
Stats 2964.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=356756 bytes_read=858285 bytes_retransmit=0 bytes_invalid=0 send_seq=20039 receive_seq=20039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16378 bytes_read=52338 bytes_retransmit=0 bytes_invalid=0 send_seq=2704 receive_seq=2704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999344  heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.83 cputime=244.040 memavail=698948 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.426
Stats 2965.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=357050 bytes_read=858779 bytes_retransmit=0 bytes_invalid=0 send_seq=20056 receive_seq=20056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=16384 bytes_read=52354 bytes_retransmit=0 bytes_invalid=0 send_seq=2705 receive_seq=2705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999359  heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.83 cputime=244.154 memavail=698980 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.375
Stats 2966.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=357313 bytes_read=859233 bytes_retransmit=0 bytes_invalid=0 send_seq=20071 receive_seq=20071 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16390 bytes_read=52383 bytes_retransmit=0 bytes_invalid=0 send_seq=2706 receive_seq=2706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999365  heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.84 cputime=244.267 memavail=698980 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.308
Stats 2967.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=357524 bytes_read=859683 bytes_retransmit=0 bytes_invalid=0 send_seq=20085 receive_seq=20085 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16396 bytes_read=52399 bytes_retransmit=0 bytes_invalid=0 send_seq=2707 receive_seq=2707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999349  heater_bed: target=60 temp=60.0 pwm=0.101 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.5 sysload=0.84 cputime=244.383 memavail=698940 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.258
Stats 2968.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=357735 bytes_read=860162 bytes_retransmit=0 bytes_invalid=0 send_seq=20099 receive_seq=20099 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16402 bytes_read=52415 bytes_retransmit=0 bytes_invalid=0 send_seq=2708 receive_seq=2708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999312  heater_bed: target=60 temp=60.0 pwm=0.115 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.2 sysload=0.84 cputime=244.494 memavail=698992 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.258
Stats 2969.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=357957 bytes_read=860611 bytes_retransmit=0 bytes_invalid=0 send_seq=20113 receive_seq=20113 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16408 bytes_read=52431 bytes_retransmit=0 bytes_invalid=0 send_seq=2709 receive_seq=2709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999291  heater_bed: target=60 temp=60.0 pwm=0.117 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.84 cputime=244.620 memavail=698992 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.178
Stats 2970.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=358152 bytes_read=861056 bytes_retransmit=0 bytes_invalid=0 send_seq=20126 receive_seq=20126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16414 bytes_read=52447 bytes_retransmit=0 bytes_invalid=0 send_seq=2710 receive_seq=2710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999284  heater_bed: target=60 temp=59.9 pwm=0.186 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.84 cputime=244.726 memavail=698992 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.244
Stats 2971.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000014 bytes_write=358395 bytes_read=861544 bytes_retransmit=0 bytes_invalid=0 send_seq=20142 receive_seq=20142 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16420 bytes_read=52475 bytes_retransmit=0 bytes_invalid=0 send_seq=2711 receive_seq=2711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999279  heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.85 cputime=244.847 memavail=698992 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.306
Stats 2972.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=358601 bytes_read=862010 bytes_retransmit=0 bytes_invalid=0 send_seq=20157 receive_seq=20157 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16426 bytes_read=52490 bytes_retransmit=0 bytes_invalid=0 send_seq=2712 receive_seq=2712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999261  heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.85 cputime=244.960 memavail=698992 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.400
Stats 2973.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=358796 bytes_read=862455 bytes_retransmit=0 bytes_invalid=0 send_seq=20170 receive_seq=20170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16432 bytes_read=52505 bytes_retransmit=0 bytes_invalid=0 send_seq=2713 receive_seq=2713 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999178  heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.85 cputime=245.071 memavail=698928 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.457
Stats 2974.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=358980 bytes_read=862928 bytes_retransmit=0 bytes_invalid=0 send_seq=20183 receive_seq=20183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16438 bytes_read=52520 bytes_retransmit=0 bytes_invalid=0 send_seq=2714 receive_seq=2714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999209  heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.85 cputime=245.179 memavail=699036 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.457
Stats 2975.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=359175 bytes_read=863358 bytes_retransmit=0 bytes_invalid=0 send_seq=20196 receive_seq=20196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16444 bytes_read=52535 bytes_retransmit=0 bytes_invalid=0 send_seq=2715 receive_seq=2715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999267  heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.85 cputime=245.297 memavail=699004 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.395
Stats 2976.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=359386 bytes_read=863808 bytes_retransmit=0 bytes_invalid=0 send_seq=20210 receive_seq=20210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16450 bytes_read=52564 bytes_retransmit=0 bytes_invalid=0 send_seq=2716 receive_seq=2716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999269  heater_bed: target=60 temp=59.9 pwm=0.144 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.87 cputime=245.402 memavail=698752 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.301
Stats 2977.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=359597 bytes_read=864301 bytes_retransmit=0 bytes_invalid=0 send_seq=20224 receive_seq=20224 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16456 bytes_read=52580 bytes_retransmit=0 bytes_invalid=0 send_seq=2717 receive_seq=2717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999324  heater_bed: target=60 temp=60.0 pwm=0.090 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.87 cputime=245.520 memavail=698752 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.211
Stats 2978.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=359808 bytes_read=864736 bytes_retransmit=0 bytes_invalid=0 send_seq=20238 receive_seq=20238 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16462 bytes_read=52596 bytes_retransmit=0 bytes_invalid=0 send_seq=2718 receive_seq=2718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999316  heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.87 cputime=245.634 memavail=698752 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.7 pwm=0.211
Stats 2979.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=360041 bytes_read=865186 bytes_retransmit=0 bytes_invalid=0 send_seq=20252 receive_seq=20252 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16468 bytes_read=52612 bytes_retransmit=0 bytes_invalid=0 send_seq=2719 receive_seq=2719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999351  heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.87 cputime=245.750 memavail=698640 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.211
Stats 2980.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=360225 bytes_read=865659 bytes_retransmit=0 bytes_invalid=0 send_seq=20265 receive_seq=20265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16474 bytes_read=52628 bytes_retransmit=0 bytes_invalid=0 send_seq=2720 receive_seq=2720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999366  heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=40.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.87 cputime=245.867 memavail=698764 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.315
Stats 2981.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=360485 bytes_read=866086 bytes_retransmit=0 bytes_invalid=0 send_seq=20280 receive_seq=20280 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16480 bytes_read=52657 bytes_retransmit=0 bytes_invalid=0 send_seq=2721 receive_seq=2721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999363  heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=38.6 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.88 cputime=245.985 memavail=698764 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.367
Stats 2982.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=360685 bytes_read=866555 bytes_retransmit=0 bytes_invalid=0 send_seq=20294 receive_seq=20294 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16486 bytes_read=52673 bytes_retransmit=0 bytes_invalid=0 send_seq=2722 receive_seq=2722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999350  heater_bed: target=60 temp=60.0 pwm=0.104 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.88 cputime=246.099 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.367
Stats 2983.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=360885 bytes_read=867019 bytes_retransmit=0 bytes_invalid=0 send_seq=20308 receive_seq=20308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16492 bytes_read=52689 bytes_retransmit=0 bytes_invalid=0 send_seq=2723 receive_seq=2723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999291  heater_bed: target=60 temp=60.0 pwm=0.104 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.88 cputime=246.214 memavail=698776 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.429
Stats 2984.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=361069 bytes_read=867449 bytes_retransmit=0 bytes_invalid=0 send_seq=20321 receive_seq=20321 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16498 bytes_read=52705 bytes_retransmit=0 bytes_invalid=0 send_seq=2724 receive_seq=2724 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999268  heater_bed: target=60 temp=60.1 pwm=0.104 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.4 sysload=0.88 cputime=246.327 memavail=698700 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.429
Stats 2985.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=361269 bytes_read=867928 bytes_retransmit=0 bytes_invalid=0 send_seq=20335 receive_seq=20335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16504 bytes_read=52721 bytes_retransmit=0 bytes_invalid=0 send_seq=2725 receive_seq=2725 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999211  heater_bed: target=60 temp=60.0 pwm=0.104 raspberry_pi: temp=39.2 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.88 cputime=246.451 memavail=698256 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.340
Stats 2986.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=361485 bytes_read=868382 bytes_retransmit=0 bytes_invalid=0 send_seq=20350 receive_seq=20350 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16510 bytes_read=52750 bytes_retransmit=0 bytes_invalid=0 send_seq=2726 receive_seq=2726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999201  heater_bed: target=60 temp=60.1 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.89 cputime=246.564 memavail=698272 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.283
Stats 2987.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=361680 bytes_read=868812 bytes_retransmit=0 bytes_invalid=0 send_seq=20363 receive_seq=20363 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16516 bytes_read=52766 bytes_retransmit=0 bytes_invalid=0 send_seq=2727 receive_seq=2727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999202  heater_bed: target=60 temp=60.1 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.3 sysload=0.89 cputime=246.675 memavail=698272 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.216
Stats 2988.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=361864 bytes_read=869301 bytes_retransmit=0 bytes_invalid=0 send_seq=20376 receive_seq=20376 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16522 bytes_read=52782 bytes_retransmit=0 bytes_invalid=0 send_seq=2728 receive_seq=2728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999195  heater_bed: target=60 temp=60.2 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.89 cputime=246.790 memavail=698536 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.216
Stats 2989.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=362095 bytes_read=869760 bytes_retransmit=0 bytes_invalid=0 send_seq=20392 receive_seq=20392 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16528 bytes_read=52798 bytes_retransmit=0 bytes_invalid=0 send_seq=2729 receive_seq=2729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999250  heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=36.6 chamber: temp=21.4 sysload=0.89 cputime=246.905 memavail=698536 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.285
Stats 2990.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=362310 bytes_read=870200 bytes_retransmit=0 bytes_invalid=0 send_seq=20407 receive_seq=20407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16534 bytes_read=52814 bytes_retransmit=0 bytes_invalid=0 send_seq=2730 receive_seq=2730 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999263  heater_bed: target=60 temp=60.2 pwm=0.124 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.89 cputime=247.023 memavail=698536 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.285
Stats 2991.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=362551 bytes_read=870689 bytes_retransmit=0 bytes_invalid=0 send_seq=20423 receive_seq=20423 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16540 bytes_read=52843 bytes_retransmit=0 bytes_invalid=0 send_seq=2731 receive_seq=2731 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999288  heater_bed: target=60 temp=60.2 pwm=0.063 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.2 sysload=0.90 cputime=247.128 memavail=698504 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.391
Stats 2992.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=362761 bytes_read=871138 bytes_retransmit=0 bytes_invalid=0 send_seq=20437 receive_seq=20437 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16546 bytes_read=52859 bytes_retransmit=0 bytes_invalid=0 send_seq=2732 receive_seq=2732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999307  heater_bed: target=60 temp=60.2 pwm=0.061 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.90 cputime=247.243 memavail=698536 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.391
Stats 2993.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=362940 bytes_read=871578 bytes_retransmit=0 bytes_invalid=0 send_seq=20449 receive_seq=20449 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16552 bytes_read=52875 bytes_retransmit=0 bytes_invalid=0 send_seq=2733 receive_seq=2733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999385  heater_bed: target=60 temp=60.3 pwm=0.061 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.3 sysload=0.90 cputime=247.356 memavail=698536 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.391
Stats 2994.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=363140 bytes_read=872057 bytes_retransmit=0 bytes_invalid=0 send_seq=20463 receive_seq=20463 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16558 bytes_read=52891 bytes_retransmit=0 bytes_invalid=0 send_seq=2734 receive_seq=2734 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999352  heater_bed: target=60 temp=60.2 pwm=0.164 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.90 cputime=247.480 memavail=698532 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.391
Stats 2995.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=363397 bytes_read=872516 bytes_retransmit=0 bytes_invalid=0 send_seq=20479 receive_seq=20479 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=16564 bytes_read=52907 bytes_retransmit=0 bytes_invalid=0 send_seq=2735 receive_seq=2735 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999466  heater_bed: target=60 temp=60.1 pwm=0.164 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.3 sysload=0.90 cputime=247.611 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.310
Stats 2996.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=363638 bytes_read=872951 bytes_retransmit=0 bytes_invalid=0 send_seq=20493 receive_seq=20493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16570 bytes_read=52936 bytes_retransmit=0 bytes_invalid=0 send_seq=2736 receive_seq=2736 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999445  heater_bed: target=60 temp=60.1 pwm=0.164 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.90 cputime=247.723 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.258
Stats 2997.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=363838 bytes_read=873445 bytes_retransmit=0 bytes_invalid=0 send_seq=20507 receive_seq=20507 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16576 bytes_read=52952 bytes_retransmit=0 bytes_invalid=0 send_seq=2737 receive_seq=2737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999387  heater_bed: target=60 temp=60.1 pwm=0.101 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.90 cputime=247.838 memavail=698512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.258
Stats 2998.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=364076 bytes_read=873899 bytes_retransmit=0 bytes_invalid=0 send_seq=20522 receive_seq=20522 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16582 bytes_read=52968 bytes_retransmit=0 bytes_invalid=0 send_seq=2738 receive_seq=2738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999377  heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.90 cputime=247.952 memavail=698552 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.255
Stats 2999.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=364292 bytes_read=874354 bytes_retransmit=0 bytes_invalid=0 send_seq=20537 receive_seq=20537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16588 bytes_read=52984 bytes_retransmit=0 bytes_invalid=0 send_seq=2739 receive_seq=2739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999350  heater_bed: target=60 temp=60.1 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.90 cputime=248.069 memavail=698552 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.255
Stats 3000.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=364492 bytes_read=874818 bytes_retransmit=0 bytes_invalid=0 send_seq=20551 receive_seq=20551 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=16594 bytes_read=53000 bytes_retransmit=0 bytes_invalid=0 send_seq=2740 receive_seq=2740 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999307  heater_bed: target=60 temp=60.1 pwm=0.098 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.90 cputime=248.175 memavail=698592 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.335
Stats 3001.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=364687 bytes_read=875262 bytes_retransmit=0 bytes_invalid=0 send_seq=20564 receive_seq=20564 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16600 bytes_read=53029 bytes_retransmit=0 bytes_invalid=0 send_seq=2741 receive_seq=2741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999262  heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.83 cputime=248.294 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.335
Stats 3002.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=364887 bytes_read=875727 bytes_retransmit=0 bytes_invalid=0 send_seq=20578 receive_seq=20578 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16606 bytes_read=53045 bytes_retransmit=0 bytes_invalid=0 send_seq=2742 receive_seq=2742 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999226  heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=38.6 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.83 cputime=248.421 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.386
Stats 3003.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=365105 bytes_read=876205 bytes_retransmit=0 bytes_invalid=0 send_seq=20593 receive_seq=20592 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16612 bytes_read=53061 bytes_retransmit=0 bytes_invalid=0 send_seq=2743 receive_seq=2743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999255  heater_bed: target=60 temp=59.9 pwm=0.201 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.6 sysload=0.83 cputime=248.534 memavail=698516 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.386
Stats 3004.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=365384 bytes_read=876650 bytes_retransmit=0 bytes_invalid=0 send_seq=20608 receive_seq=20608 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16618 bytes_read=53077 bytes_retransmit=0 bytes_invalid=0 send_seq=2744 receive_seq=2744 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999274  heater_bed: target=60 temp=59.9 pwm=0.201 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.83 cputime=248.642 memavail=699092 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.386
Stats 3005.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=365584 bytes_read=877086 bytes_retransmit=0 bytes_invalid=0 send_seq=20622 receive_seq=20622 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16630 bytes_read=53109 bytes_retransmit=0 bytes_invalid=0 send_seq=2746 receive_seq=2746 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999275  heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.83 cputime=248.754 memavail=699068 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.306
Stats 3006.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=365827 bytes_read=877566 bytes_retransmit=0 bytes_invalid=0 send_seq=20638 receive_seq=20638 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=16636 bytes_read=53138 bytes_retransmit=0 bytes_invalid=0 send_seq=2747 receive_seq=2747 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999462  heater_bed: target=60 temp=59.9 pwm=0.155 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.77 cputime=248.861 memavail=698824 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.251
Stats 3007.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=366038 bytes_read=878001 bytes_retransmit=0 bytes_invalid=0 send_seq=20652 receive_seq=20652 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=16642 bytes_read=53154 bytes_retransmit=0 bytes_invalid=0 send_seq=2748 receive_seq=2748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999417  heater_bed: target=60 temp=59.8 pwm=0.211 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.77 cputime=248.972 memavail=698824 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.328
Stats 3008.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=366286 bytes_read=878481 bytes_retransmit=0 bytes_invalid=0 send_seq=20669 receive_seq=20669 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=16648 bytes_read=53170 bytes_retransmit=0 bytes_invalid=0 send_seq=2749 receive_seq=2749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999383  heater_bed: target=60 temp=59.8 pwm=0.197 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.77 cputime=249.089 memavail=698824 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.231
Stats 3009.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=366540 bytes_read=878969 bytes_retransmit=0 bytes_invalid=0 send_seq=20685 receive_seq=20685 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=16654 bytes_read=53186 bytes_retransmit=0 bytes_invalid=0 send_seq=2750 receive_seq=2750 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999375  heater_bed: target=60 temp=59.9 pwm=0.128 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.6 sysload=0.77 cputime=249.204 memavail=698780 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.291
Stats 3010.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=366822 bytes_read=879409 bytes_retransmit=0 bytes_invalid=0 send_seq=20700 receive_seq=20700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000024 bytes_write=16660 bytes_read=53202 bytes_retransmit=0 bytes_invalid=0 send_seq=2751 receive_seq=2751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999371  heater_bed: target=60 temp=59.8 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.77 cputime=249.329 memavail=698828 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.291
Stats 3011.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=367017 bytes_read=879883 bytes_retransmit=0 bytes_invalid=0 send_seq=20713 receive_seq=20713 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16666 bytes_read=53231 bytes_retransmit=0 bytes_invalid=0 send_seq=2752 receive_seq=2752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999323  heater_bed: target=60 temp=59.8 pwm=0.182 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.70 cputime=249.444 memavail=698828 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.349
Stats 3012.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=367269 bytes_read=880332 bytes_retransmit=0 bytes_invalid=0 send_seq=20728 receive_seq=20727 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16672 bytes_read=53247 bytes_retransmit=0 bytes_invalid=0 send_seq=2753 receive_seq=2753 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999316  heater_bed: target=60 temp=59.8 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.70 cputime=249.560 memavail=698816 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.349
Stats 3013.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=367515 bytes_read=880792 bytes_retransmit=0 bytes_invalid=0 send_seq=20743 receive_seq=20743 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16678 bytes_read=53263 bytes_retransmit=0 bytes_invalid=0 send_seq=2754 receive_seq=2754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999333  heater_bed: target=60 temp=59.8 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.70 cputime=249.669 memavail=698840 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.407
Stats 3014.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=367699 bytes_read=881266 bytes_retransmit=0 bytes_invalid=0 send_seq=20756 receive_seq=20756 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16684 bytes_read=53279 bytes_retransmit=0 bytes_invalid=0 send_seq=2755 receive_seq=2755 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999309  heater_bed: target=60 temp=59.7 pwm=0.182 raspberry_pi: temp=40.2 mcu_temp: temp=36.9 chamber: temp=21.4 sysload=0.70 cputime=249.788 memavail=698848 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.407
Stats 3015.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=367899 bytes_read=881715 bytes_retransmit=0 bytes_invalid=0 send_seq=20770 receive_seq=20770 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16690 bytes_read=53295 bytes_retransmit=0 bytes_invalid=0 send_seq=2756 receive_seq=2756 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999268  heater_bed: target=60 temp=59.8 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.70 cputime=249.898 memavail=698596 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.350
Stats 3016.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=368105 bytes_read=882145 bytes_retransmit=0 bytes_invalid=0 send_seq=20783 receive_seq=20783 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16696 bytes_read=53324 bytes_retransmit=0 bytes_invalid=0 send_seq=2757 receive_seq=2757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999272  heater_bed: target=60 temp=59.8 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.65 cputime=250.008 memavail=698596 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.297
Stats 3017.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=368305 bytes_read=882624 bytes_retransmit=0 bytes_invalid=0 send_seq=20797 receive_seq=20797 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16702 bytes_read=53340 bytes_retransmit=0 bytes_invalid=0 send_seq=2758 receive_seq=2758 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999273  heater_bed: target=60 temp=59.8 pwm=0.178 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.4 sysload=0.65 cputime=250.122 memavail=698596 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.232
Stats 3018.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=368546 bytes_read=883093 bytes_retransmit=0 bytes_invalid=0 send_seq=20812 receive_seq=20812 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16708 bytes_read=53356 bytes_retransmit=0 bytes_invalid=0 send_seq=2759 receive_seq=2759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999285  heater_bed: target=60 temp=59.8 pwm=0.178 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.3 sysload=0.65 cputime=250.243 memavail=698296 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.232
Stats 3019.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=368792 bytes_read=883533 bytes_retransmit=0 bytes_invalid=0 send_seq=20827 receive_seq=20827 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16714 bytes_read=53372 bytes_retransmit=0 bytes_invalid=0 send_seq=2760 receive_seq=2760 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999396  heater_bed: target=60 temp=59.8 pwm=0.124 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.65 cputime=250.361 memavail=698356 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.232
Stats 3020.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=369032 bytes_read=884027 bytes_retransmit=0 bytes_invalid=0 send_seq=20844 receive_seq=20844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16720 bytes_read=53388 bytes_retransmit=0 bytes_invalid=0 send_seq=2761 receive_seq=2761 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999372  heater_bed: target=60 temp=59.9 pwm=0.108 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.5 sysload=0.65 cputime=250.483 memavail=698356 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.301
Stats 3021.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=369351 bytes_read=884496 bytes_retransmit=0 bytes_invalid=0 send_seq=20862 receive_seq=20862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16726 bytes_read=53417 bytes_retransmit=0 bytes_invalid=0 send_seq=2762 receive_seq=2762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999369  heater_bed: target=60 temp=59.8 pwm=0.179 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.59 cputime=250.606 memavail=698388 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.359
Stats 3022.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=369638 bytes_read=884956 bytes_retransmit=0 bytes_invalid=0 send_seq=20878 receive_seq=20878 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16732 bytes_read=53433 bytes_retransmit=0 bytes_invalid=0 send_seq=2763 receive_seq=2763 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999350  heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.6 sysload=0.59 cputime=250.730 memavail=698356 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.359
Stats 3023.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=369917 bytes_read=885440 bytes_retransmit=0 bytes_invalid=0 send_seq=20893 receive_seq=20893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16738 bytes_read=53449 bytes_retransmit=0 bytes_invalid=0 send_seq=2764 receive_seq=2764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999384  heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.59 cputime=250.852 memavail=698356 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.359
Stats 3024.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=370101 bytes_read=885884 bytes_retransmit=0 bytes_invalid=0 send_seq=20906 receive_seq=20906 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16744 bytes_read=53465 bytes_retransmit=0 bytes_invalid=0 send_seq=2765 receive_seq=2765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999383  heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.3 sysload=0.59 cputime=250.951 memavail=698880 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.359
Stats 3025.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=370348 bytes_read=886340 bytes_retransmit=0 bytes_invalid=0 send_seq=20922 receive_seq=20922 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16750 bytes_read=53481 bytes_retransmit=0 bytes_invalid=0 send_seq=2766 receive_seq=2766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999363  heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.59 cputime=251.049 memavail=698880 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.359
Stats 3026.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=370621 bytes_read=886829 bytes_retransmit=0 bytes_invalid=0 send_seq=20938 receive_seq=20938 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16756 bytes_read=53510 bytes_retransmit=0 bytes_invalid=0 send_seq=2767 receive_seq=2767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999334  heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.55 cputime=251.163 memavail=698880 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.337
Stats 3027.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=370813 bytes_read=887293 bytes_retransmit=0 bytes_invalid=0 send_seq=20952 receive_seq=20952 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16762 bytes_read=53526 bytes_retransmit=0 bytes_invalid=0 send_seq=2768 receive_seq=2768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999312  heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.55 cputime=251.275 memavail=698576 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.337
Stats 3028.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=371103 bytes_read=887732 bytes_retransmit=0 bytes_invalid=0 send_seq=20967 receive_seq=20967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16768 bytes_read=53542 bytes_retransmit=0 bytes_invalid=0 send_seq=2769 receive_seq=2769 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999275  heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.3 sysload=0.55 cputime=251.386 memavail=698640 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.263
Stats 3029.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=371366 bytes_read=888205 bytes_retransmit=0 bytes_invalid=0 send_seq=20983 receive_seq=20983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16774 bytes_read=53558 bytes_retransmit=0 bytes_invalid=0 send_seq=2770 receive_seq=2770 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999304  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.55 cputime=251.496 memavail=698648 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 3030.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=371593 bytes_read=888651 bytes_retransmit=0 bytes_invalid=0 send_seq=20997 receive_seq=20997 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=16780 bytes_read=53574 bytes_retransmit=0 bytes_invalid=0 send_seq=2771 receive_seq=2771 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999284  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.5 sysload=0.55 cputime=251.603 memavail=698244 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.263
Stats 3031.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=371888 bytes_read=889111 bytes_retransmit=0 bytes_invalid=0 send_seq=21013 receive_seq=21013 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16786 bytes_read=53603 bytes_retransmit=0 bytes_invalid=0 send_seq=2772 receive_seq=2772 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999289  heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.50 cputime=251.715 memavail=698396 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.336
Stats 3032.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=372083 bytes_read=889599 bytes_retransmit=0 bytes_invalid=0 send_seq=21026 receive_seq=21026 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16792 bytes_read=53619 bytes_retransmit=0 bytes_invalid=0 send_seq=2773 receive_seq=2773 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999304  heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.50 cputime=251.826 memavail=698396 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.336
Stats 3033.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=372267 bytes_read=890029 bytes_retransmit=0 bytes_invalid=0 send_seq=21039 receive_seq=21039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16798 bytes_read=53635 bytes_retransmit=0 bytes_invalid=0 send_seq=2774 receive_seq=2774 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999291  heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=40.2 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.50 cputime=251.934 memavail=698644 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.336
Stats 3034.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=372451 bytes_read=890474 bytes_retransmit=0 bytes_invalid=0 send_seq=21052 receive_seq=21052 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16804 bytes_read=53651 bytes_retransmit=0 bytes_invalid=0 send_seq=2775 receive_seq=2775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999330  heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.50 cputime=252.028 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.336
Stats 3035.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=372667 bytes_read=890957 bytes_retransmit=0 bytes_invalid=0 send_seq=21067 receive_seq=21067 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=16810 bytes_read=53667 bytes_retransmit=0 bytes_invalid=0 send_seq=2776 receive_seq=2776 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999329  heater_bed: target=60 temp=59.9 pwm=0.190 raspberry_pi: temp=39.2 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.50 cputime=252.125 memavail=698660 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.380
Stats 3036.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=372873 bytes_read=891387 bytes_retransmit=0 bytes_invalid=0 send_seq=21080 receive_seq=21080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16816 bytes_read=53696 bytes_retransmit=0 bytes_invalid=0 send_seq=2777 receive_seq=2777 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999272  heater_bed: target=60 temp=59.9 pwm=0.138 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.46 cputime=252.232 memavail=698652 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.380
Stats 3037.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=373089 bytes_read=891857 bytes_retransmit=0 bytes_invalid=0 send_seq=21095 receive_seq=21095 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16822 bytes_read=53712 bytes_retransmit=0 bytes_invalid=0 send_seq=2778 receive_seq=2778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999331  heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.46 cputime=252.345 memavail=698660 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.320
Stats 3038.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=373310 bytes_read=892335 bytes_retransmit=0 bytes_invalid=0 send_seq=21109 receive_seq=21109 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16828 bytes_read=53728 bytes_retransmit=0 bytes_invalid=0 send_seq=2779 receive_seq=2779 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999291  heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.46 cputime=252.456 memavail=698660 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.320
Stats 3039.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=373510 bytes_read=892770 bytes_retransmit=0 bytes_invalid=0 send_seq=21123 receive_seq=21123 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16834 bytes_read=53744 bytes_retransmit=0 bytes_invalid=0 send_seq=2780 receive_seq=2780 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999258  heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.46 cputime=252.562 memavail=698580 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.260
Stats 3040.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=373705 bytes_read=893229 bytes_retransmit=0 bytes_invalid=0 send_seq=21136 receive_seq=21136 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16840 bytes_read=53760 bytes_retransmit=0 bytes_invalid=0 send_seq=2781 receive_seq=2781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999285  heater_bed: target=60 temp=60.0 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=36.7 chamber: temp=21.4 sysload=0.46 cputime=252.673 memavail=698672 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.260
Stats 3041.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=373889 bytes_read=893688 bytes_retransmit=0 bytes_invalid=0 send_seq=21149 receive_seq=21149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16846 bytes_read=53789 bytes_retransmit=0 bytes_invalid=0 send_seq=2782 receive_seq=2782 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999269  heater_bed: target=60 temp=60.0 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.43 cputime=252.775 memavail=698672 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.260
Stats 3042.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=374089 bytes_read=894123 bytes_retransmit=0 bytes_invalid=0 send_seq=21163 receive_seq=21163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16852 bytes_read=53805 bytes_retransmit=0 bytes_invalid=0 send_seq=2783 receive_seq=2783 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999264  heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=0.43 cputime=252.891 memavail=698916 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.311
Stats 3043.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=374322 bytes_read=894602 bytes_retransmit=0 bytes_invalid=0 send_seq=21177 receive_seq=21177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16858 bytes_read=53821 bytes_retransmit=0 bytes_invalid=0 send_seq=2784 receive_seq=2784 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999269  heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.43 cputime=253.007 memavail=698924 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.311
Stats 3044.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=374636 bytes_read=895081 bytes_retransmit=0 bytes_invalid=0 send_seq=21194 receive_seq=21194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16864 bytes_read=53837 bytes_retransmit=0 bytes_invalid=0 send_seq=2785 receive_seq=2785 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999264  heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.43 cputime=253.129 memavail=699448 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.384
Stats 3045.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=374885 bytes_read=895521 bytes_retransmit=0 bytes_invalid=0 send_seq=21209 receive_seq=21209 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16870 bytes_read=53853 bytes_retransmit=0 bytes_invalid=0 send_seq=2786 receive_seq=2786 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999278  heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.43 cputime=253.252 memavail=699336 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.384
Stats 3046.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=375084 bytes_read=896000 bytes_retransmit=0 bytes_invalid=0 send_seq=21223 receive_seq=21223 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16876 bytes_read=53882 bytes_retransmit=0 bytes_invalid=0 send_seq=2787 receive_seq=2787 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999301  heater_bed: target=60 temp=60.2 pwm=0.078 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.3 sysload=0.47 cputime=253.365 memavail=699440 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.384
Stats 3047.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=375284 bytes_read=896449 bytes_retransmit=0 bytes_invalid=0 send_seq=21237 receive_seq=21237 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16882 bytes_read=53898 bytes_retransmit=0 bytes_invalid=0 send_seq=2788 receive_seq=2788 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999335  heater_bed: target=60 temp=60.2 pwm=0.078 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.47 cputime=253.477 memavail=699440 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.328
Stats 3048.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=375500 bytes_read=896904 bytes_retransmit=0 bytes_invalid=0 send_seq=21252 receive_seq=21252 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16888 bytes_read=53914 bytes_retransmit=0 bytes_invalid=0 send_seq=2789 receive_seq=2789 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999331  heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=38.6 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=0.47 cputime=253.589 memavail=699636 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.250
Stats 3049.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=375782 bytes_read=897388 bytes_retransmit=0 bytes_invalid=0 send_seq=21267 receive_seq=21267 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16894 bytes_read=53930 bytes_retransmit=0 bytes_invalid=0 send_seq=2790 receive_seq=2790 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999325  heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.4 sysload=0.47 cputime=253.708 memavail=699704 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.250
Stats 3050.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=375966 bytes_read=897832 bytes_retransmit=0 bytes_invalid=0 send_seq=21280 receive_seq=21280 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16900 bytes_read=53946 bytes_retransmit=0 bytes_invalid=0 send_seq=2791 receive_seq=2791 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999329  heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.47 cputime=253.818 memavail=697192 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.250
Stats 3051.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=376199 bytes_read=898267 bytes_retransmit=0 bytes_invalid=0 send_seq=21294 receive_seq=21294 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16906 bytes_read=53975 bytes_retransmit=0 bytes_invalid=0 send_seq=2792 receive_seq=2792 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999363  heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.51 cputime=253.903 memavail=698444 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.250
Stats 3052.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=376479 bytes_read=898769 bytes_retransmit=0 bytes_invalid=0 send_seq=21311 receive_seq=21311 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16912 bytes_read=53991 bytes_retransmit=0 bytes_invalid=0 send_seq=2793 receive_seq=2793 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999333  heater_bed: target=60 temp=60.2 pwm=0.064 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=0.51 cputime=254.026 memavail=698444 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.303
Stats 3053.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=376690 bytes_read=899204 bytes_retransmit=0 bytes_invalid=0 send_seq=21325 receive_seq=21325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16918 bytes_read=54007 bytes_retransmit=0 bytes_invalid=0 send_seq=2794 receive_seq=2794 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999276  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.4 sysload=0.51 cputime=254.143 memavail=698444 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.355
Stats 3054.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=376882 bytes_read=899639 bytes_retransmit=0 bytes_invalid=0 send_seq=21339 receive_seq=21339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16924 bytes_read=54023 bytes_retransmit=0 bytes_invalid=0 send_seq=2795 receive_seq=2795 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999292  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.51 cputime=254.262 memavail=698320 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.355
Stats 3055.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=377215 bytes_read=900138 bytes_retransmit=0 bytes_invalid=0 send_seq=21358 receive_seq=21357 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=16930 bytes_read=54039 bytes_retransmit=0 bytes_invalid=0 send_seq=2796 receive_seq=2796 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999300  heater_bed: target=60 temp=60.2 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.51 cputime=254.375 memavail=698460 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.355
Stats 3056.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=377453 bytes_read=900592 bytes_retransmit=0 bytes_invalid=0 send_seq=21373 receive_seq=21372 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16936 bytes_read=54068 bytes_retransmit=0 bytes_invalid=0 send_seq=2797 receive_seq=2797 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999318  heater_bed: target=60 temp=60.2 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.63 cputime=254.486 memavail=698460 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.355
Stats 3057.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=377733 bytes_read=901057 bytes_retransmit=0 bytes_invalid=0 send_seq=21390 receive_seq=21389 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16942 bytes_read=54083 bytes_retransmit=0 bytes_invalid=0 send_seq=2798 receive_seq=2798 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999317  heater_bed: target=60 temp=60.2 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=0.63 cputime=254.596 memavail=698460 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.331
Stats 3058.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=377938 bytes_read=901531 bytes_retransmit=0 bytes_invalid=0 send_seq=21403 receive_seq=21402 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16948 bytes_read=54098 bytes_retransmit=0 bytes_invalid=0 send_seq=2799 receive_seq=2799 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999334  heater_bed: target=60 temp=60.2 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.4 sysload=0.63 cputime=254.708 memavail=698460 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.331
Stats 3059.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=378133 bytes_read=901975 bytes_retransmit=0 bytes_invalid=0 send_seq=21416 receive_seq=21415 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16960 bytes_read=54128 bytes_retransmit=0 bytes_invalid=0 send_seq=2801 receive_seq=2801 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999366  heater_bed: target=60 temp=60.2 pwm=0.134 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=0.63 cputime=254.826 memavail=698460 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.268
Stats 3060.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=378391 bytes_read=902425 bytes_retransmit=0 bytes_invalid=0 send_seq=21430 receive_seq=21429 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=16966 bytes_read=54143 bytes_retransmit=0 bytes_invalid=0 send_seq=2802 receive_seq=2802 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999500  heater_bed: target=60 temp=60.2 pwm=0.066 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.63 cputime=254.947 memavail=698356 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.268
Stats 3061.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=378689 bytes_read=902913 bytes_retransmit=0 bytes_invalid=0 send_seq=21446 receive_seq=21445 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16972 bytes_read=54171 bytes_retransmit=0 bytes_invalid=0 send_seq=2803 receive_seq=2803 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999479  heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=0.74 cputime=255.064 memavail=698472 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.268
Stats 3062.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=378899 bytes_read=903348 bytes_retransmit=0 bytes_invalid=0 send_seq=21459 receive_seq=21459 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16978 bytes_read=54187 bytes_retransmit=0 bytes_invalid=0 send_seq=2804 receive_seq=2804 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999416  heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.74 cputime=255.168 memavail=698472 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.268
Stats 3063.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=379161 bytes_read=903808 bytes_retransmit=0 bytes_invalid=0 send_seq=21473 receive_seq=21472 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16984 bytes_read=54203 bytes_retransmit=0 bytes_invalid=0 send_seq=2805 receive_seq=2805 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999419  heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=0.74 cputime=255.302 memavail=698460 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.330
Stats 3064.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=379389 bytes_read=904281 bytes_retransmit=0 bytes_invalid=0 send_seq=21486 receive_seq=21485 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16990 bytes_read=54219 bytes_retransmit=0 bytes_invalid=0 send_seq=2806 receive_seq=2806 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999382  heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.74 cputime=255.412 memavail=698692 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.330
Stats 3065.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=379553 bytes_read=904706 bytes_retransmit=0 bytes_invalid=0 send_seq=21498 receive_seq=21497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=16996 bytes_read=54235 bytes_retransmit=0 bytes_invalid=0 send_seq=2807 receive_seq=2807 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999428  heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.74 cputime=255.524 memavail=698728 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.330
Stats 3066.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=379748 bytes_read=905151 bytes_retransmit=0 bytes_invalid=0 send_seq=21511 receive_seq=21510 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17002 bytes_read=54264 bytes_retransmit=0 bytes_invalid=0 send_seq=2808 receive_seq=2808 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999397  heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.3 sysload=0.76 cputime=255.634 memavail=698680 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.330
Stats 3067.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=379945 bytes_read=905624 bytes_retransmit=0 bytes_invalid=0 send_seq=21523 receive_seq=21523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17008 bytes_read=54280 bytes_retransmit=0 bytes_invalid=0 send_seq=2809 receive_seq=2809 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999359  heater_bed: target=60 temp=60.2 pwm=0.054 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.76 cputime=255.734 memavail=698736 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.358
Stats 3068.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=380222 bytes_read=906074 bytes_retransmit=0 bytes_invalid=0 send_seq=21537 receive_seq=21537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17014 bytes_read=54296 bytes_retransmit=0 bytes_invalid=0 send_seq=2810 receive_seq=2810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999384  heater_bed: target=60 temp=60.2 pwm=0.054 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.76 cputime=255.847 memavail=698736 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.358
Stats 3069.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=380520 bytes_read=906534 bytes_retransmit=0 bytes_invalid=0 send_seq=21553 receive_seq=21553 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17020 bytes_read=54312 bytes_retransmit=0 bytes_invalid=0 send_seq=2811 receive_seq=2811 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999343  heater_bed: target=60 temp=60.3 pwm=0.109 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=0.76 cputime=255.970 memavail=698708 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.358
Stats 3070.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=380769 bytes_read=907017 bytes_retransmit=0 bytes_invalid=0 send_seq=21568 receive_seq=21568 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17026 bytes_read=54328 bytes_retransmit=0 bytes_invalid=0 send_seq=2812 receive_seq=2812 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999320  heater_bed: target=60 temp=60.2 pwm=0.109 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.76 cputime=256.084 memavail=698740 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.282
Stats 3071.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=380963 bytes_read=907447 bytes_retransmit=0 bytes_invalid=0 send_seq=21581 receive_seq=21581 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17032 bytes_read=54357 bytes_retransmit=0 bytes_invalid=0 send_seq=2813 receive_seq=2813 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999302  heater_bed: target=60 temp=60.3 pwm=0.056 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.86 cputime=256.200 memavail=698740 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.282
Stats 3072.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=381142 bytes_read=907887 bytes_retransmit=0 bytes_invalid=0 send_seq=21593 receive_seq=21593 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17038 bytes_read=54373 bytes_retransmit=0 bytes_invalid=0 send_seq=2814 receive_seq=2814 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999295  heater_bed: target=60 temp=60.2 pwm=0.056 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.86 cputime=256.315 memavail=698748 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.282
Stats 3073.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=381449 bytes_read=908385 bytes_retransmit=0 bytes_invalid=0 send_seq=21609 receive_seq=21608 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17044 bytes_read=54389 bytes_retransmit=0 bytes_invalid=0 send_seq=2815 receive_seq=2815 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999318  heater_bed: target=60 temp=60.2 pwm=0.116 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=0.86 cputime=256.407 memavail=698748 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.282
Stats 3074.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=381692 bytes_read=908825 bytes_retransmit=0 bytes_invalid=0 send_seq=21624 receive_seq=21623 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17050 bytes_read=54405 bytes_retransmit=0 bytes_invalid=0 send_seq=2816 receive_seq=2816 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999279  heater_bed: target=60 temp=60.2 pwm=0.116 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=0.86 cputime=256.521 memavail=698892 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.274
Stats 3075.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=381951 bytes_read=909304 bytes_retransmit=0 bytes_invalid=0 send_seq=21638 receive_seq=21637 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17056 bytes_read=54421 bytes_retransmit=0 bytes_invalid=0 send_seq=2817 receive_seq=2817 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999276  heater_bed: target=60 temp=60.1 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.86 cputime=256.641 memavail=698500 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.274
Stats 3076.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=382118 bytes_read=909734 bytes_retransmit=0 bytes_invalid=0 send_seq=21649 receive_seq=21649 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17062 bytes_read=54450 bytes_retransmit=0 bytes_invalid=0 send_seq=2818 receive_seq=2818 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999269  heater_bed: target=60 temp=60.1 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=0.87 cputime=256.750 memavail=698500 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.328
Stats 3077.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=382367 bytes_read=910162 bytes_retransmit=0 bytes_invalid=0 send_seq=21664 receive_seq=21664 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17068 bytes_read=54466 bytes_retransmit=0 bytes_invalid=0 send_seq=2819 receive_seq=2819 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999296  heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.87 cputime=256.868 memavail=698500 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.378
Stats 3078.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=382595 bytes_read=910650 bytes_retransmit=0 bytes_invalid=0 send_seq=21677 receive_seq=21677 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17074 bytes_read=54482 bytes_retransmit=0 bytes_invalid=0 send_seq=2820 receive_seq=2820 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999305  heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=0.87 cputime=256.991 memavail=698368 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.378
Stats 3079.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=382861 bytes_read=911104 bytes_retransmit=0 bytes_invalid=0 send_seq=21693 receive_seq=21692 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17080 bytes_read=54498 bytes_retransmit=0 bytes_invalid=0 send_seq=2821 receive_seq=2821 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999335  heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=0.87 cputime=257.107 memavail=698512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.327
Stats 3080.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=383040 bytes_read=911545 bytes_retransmit=0 bytes_invalid=0 send_seq=21705 receive_seq=21705 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17086 bytes_read=54514 bytes_retransmit=0 bytes_invalid=0 send_seq=2822 receive_seq=2822 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999244  heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.4 sysload=0.87 cputime=257.223 memavail=698512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.327
Stats 3081.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=383289 bytes_read=912029 bytes_retransmit=0 bytes_invalid=0 send_seq=21720 receive_seq=21720 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17092 bytes_read=54543 bytes_retransmit=0 bytes_invalid=0 send_seq=2823 receive_seq=2823 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999261  heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.96 cputime=257.322 memavail=698764 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.259
Stats 3082.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=383587 bytes_read=912488 bytes_retransmit=0 bytes_invalid=0 send_seq=21736 receive_seq=21736 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17098 bytes_read=54559 bytes_retransmit=0 bytes_invalid=0 send_seq=2824 receive_seq=2824 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999247  heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.96 cputime=257.434 memavail=698764 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.259
Stats 3083.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=383815 bytes_read=912933 bytes_retransmit=0 bytes_invalid=0 send_seq=21749 receive_seq=21749 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17104 bytes_read=54575 bytes_retransmit=0 bytes_invalid=0 send_seq=2825 receive_seq=2825 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999230  heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=39.2 mcu_temp: temp=36.8 chamber: temp=21.4 sysload=0.96 cputime=257.558 memavail=698764 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.259
Stats 3084.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=383994 bytes_read=913402 bytes_retransmit=0 bytes_invalid=0 send_seq=21761 receive_seq=21761 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17110 bytes_read=54591 bytes_retransmit=0 bytes_invalid=0 send_seq=2826 receive_seq=2826 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999267  heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.96 cputime=257.672 memavail=698416 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.259
Stats 3085.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=384238 bytes_read=913851 bytes_retransmit=0 bytes_invalid=0 send_seq=21775 receive_seq=21775 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17116 bytes_read=54607 bytes_retransmit=0 bytes_invalid=0 send_seq=2827 receive_seq=2827 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999678 adj=49999233  heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.96 cputime=257.784 memavail=698524 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.337
Stats 3086.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=384547 bytes_read=914296 bytes_retransmit=0 bytes_invalid=0 send_seq=21791 receive_seq=21791 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17122 bytes_read=54636 bytes_retransmit=0 bytes_invalid=0 send_seq=2828 receive_seq=2828 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999261  heater_bed: target=60 temp=59.9 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.13 cputime=257.904 memavail=698524 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.393
Stats 3087.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=384726 bytes_read=914780 bytes_retransmit=0 bytes_invalid=0 send_seq=21803 receive_seq=21803 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17128 bytes_read=54652 bytes_retransmit=0 bytes_invalid=0 send_seq=2829 receive_seq=2829 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999260  heater_bed: target=60 temp=60.0 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=1.13 cputime=258.022 memavail=698272 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.393
Stats 3088.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=384905 bytes_read=915219 bytes_retransmit=0 bytes_invalid=0 send_seq=21815 receive_seq=21815 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17134 bytes_read=54668 bytes_retransmit=0 bytes_invalid=0 send_seq=2830 receive_seq=2830 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999306  heater_bed: target=60 temp=59.9 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.13 cputime=258.133 memavail=698272 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.393
Stats 3089.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=385154 bytes_read=915659 bytes_retransmit=0 bytes_invalid=0 send_seq=21830 receive_seq=21830 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17140 bytes_read=54684 bytes_retransmit=0 bytes_invalid=0 send_seq=2831 receive_seq=2831 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999316  heater_bed: target=60 temp=59.9 pwm=0.110 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.13 cputime=258.250 memavail=698272 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.325
Stats 3090.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=385435 bytes_read=916153 bytes_retransmit=0 bytes_invalid=0 send_seq=21847 receive_seq=21847 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17146 bytes_read=54700 bytes_retransmit=0 bytes_invalid=0 send_seq=2832 receive_seq=2832 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999325  heater_bed: target=60 temp=59.9 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.13 cputime=258.372 memavail=698176 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.259
Stats 3091.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=385630 bytes_read=916597 bytes_retransmit=0 bytes_invalid=0 send_seq=21860 receive_seq=21860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17152 bytes_read=54729 bytes_retransmit=0 bytes_invalid=0 send_seq=2833 receive_seq=2833 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999346  heater_bed: target=60 temp=59.8 pwm=0.203 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=258.489 memavail=698284 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.259
Stats 3092.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=385809 bytes_read=917037 bytes_retransmit=0 bytes_invalid=0 send_seq=21872 receive_seq=21872 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17158 bytes_read=54745 bytes_retransmit=0 bytes_invalid=0 send_seq=2834 receive_seq=2834 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999334  heater_bed: target=60 temp=59.8 pwm=0.203 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=1.28 cputime=258.599 memavail=698284 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.259
Stats 3093.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=386053 bytes_read=917516 bytes_retransmit=0 bytes_invalid=0 send_seq=21886 receive_seq=21886 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17164 bytes_read=54761 bytes_retransmit=0 bytes_invalid=0 send_seq=2835 receive_seq=2835 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999322  heater_bed: target=60 temp=59.8 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.28 cputime=258.719 memavail=698252 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.259
Stats 3094.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=386297 bytes_read=917965 bytes_retransmit=0 bytes_invalid=0 send_seq=21900 receive_seq=21900 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17170 bytes_read=54777 bytes_retransmit=0 bytes_invalid=0 send_seq=2836 receive_seq=2836 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999307  heater_bed: target=60 temp=59.8 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=258.834 memavail=698532 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.289
Stats 3095.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=386548 bytes_read=918410 bytes_retransmit=0 bytes_invalid=0 send_seq=21914 receive_seq=21913 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17176 bytes_read=54793 bytes_retransmit=0 bytes_invalid=0 send_seq=2837 receive_seq=2837 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999283  heater_bed: target=60 temp=59.8 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.4 sysload=1.28 cputime=258.959 memavail=698548 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.289
Stats 3096.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=386782 bytes_read=918893 bytes_retransmit=0 bytes_invalid=0 send_seq=21929 receive_seq=21928 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17182 bytes_read=54822 bytes_retransmit=0 bytes_invalid=0 send_seq=2838 receive_seq=2838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999273  heater_bed: target=60 temp=59.8 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=1.42 cputime=259.081 memavail=698320 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.372
Stats 3097.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=387095 bytes_read=919358 bytes_retransmit=0 bytes_invalid=0 send_seq=21945 receive_seq=21945 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17188 bytes_read=54838 bytes_retransmit=0 bytes_invalid=0 send_seq=2839 receive_seq=2839 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999250  heater_bed: target=60 temp=59.9 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.42 cputime=259.197 memavail=698296 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.372
Stats 3099.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=387259 bytes_read=919793 bytes_retransmit=0 bytes_invalid=0 send_seq=21957 receive_seq=21956 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17194 bytes_read=54854 bytes_retransmit=0 bytes_invalid=0 send_seq=2840 receive_seq=2840 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999271  heater_bed: target=60 temp=59.9 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.5 sysload=1.42 cputime=259.314 memavail=698296 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.372
Stats 3100.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=387513 bytes_read=920266 bytes_retransmit=0 bytes_invalid=0 send_seq=21970 receive_seq=21969 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17200 bytes_read=54870 bytes_retransmit=0 bytes_invalid=0 send_seq=2841 receive_seq=2841 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999278  heater_bed: target=60 temp=59.9 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.42 cputime=259.424 memavail=698492 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.322
Stats 3101.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=387731 bytes_read=920687 bytes_retransmit=0 bytes_invalid=0 send_seq=21984 receive_seq=21983 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17206 bytes_read=54886 bytes_retransmit=0 bytes_invalid=0 send_seq=2842 receive_seq=2842 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999292  heater_bed: target=60 temp=59.9 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.42 cputime=259.532 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.322
Stats 3102.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=387942 bytes_read=921147 bytes_retransmit=0 bytes_invalid=0 send_seq=21998 receive_seq=21998 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17212 bytes_read=54902 bytes_retransmit=0 bytes_invalid=0 send_seq=2843 receive_seq=2843 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999286  heater_bed: target=60 temp=59.9 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.46 cputime=259.643 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.263
Stats 3103.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=388167 bytes_read=921606 bytes_retransmit=0 bytes_invalid=0 send_seq=22011 receive_seq=22011 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17218 bytes_read=54931 bytes_retransmit=0 bytes_invalid=0 send_seq=2844 receive_seq=2844 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999333  heater_bed: target=60 temp=59.9 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=1.46 cputime=259.756 memavail=698496 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 3104.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=388395 bytes_read=922051 bytes_retransmit=0 bytes_invalid=0 send_seq=22024 receive_seq=22024 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17224 bytes_read=54947 bytes_retransmit=0 bytes_invalid=0 send_seq=2845 receive_seq=2845 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999334  heater_bed: target=60 temp=59.9 pwm=0.189 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=1.46 cputime=259.874 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 3105.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=388574 bytes_read=922491 bytes_retransmit=0 bytes_invalid=0 send_seq=22036 receive_seq=22036 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17230 bytes_read=54963 bytes_retransmit=0 bytes_invalid=0 send_seq=2846 receive_seq=2846 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999312  heater_bed: target=60 temp=59.8 pwm=0.189 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.46 cputime=259.980 memavail=698508 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.263
Stats 3106.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=388888 bytes_read=922984 bytes_retransmit=0 bytes_invalid=0 send_seq=22053 receive_seq=22053 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17236 bytes_read=54979 bytes_retransmit=0 bytes_invalid=0 send_seq=2847 receive_seq=2847 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999313  heater_bed: target=60 temp=59.8 pwm=0.200 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.46 cputime=260.099 memavail=698788 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.325
Stats 3107.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=389132 bytes_read=923419 bytes_retransmit=0 bytes_invalid=0 send_seq=22067 receive_seq=22067 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17242 bytes_read=54995 bytes_retransmit=0 bytes_invalid=0 send_seq=2848 receive_seq=2848 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999330  heater_bed: target=60 temp=59.9 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.43 cputime=260.216 memavail=698824 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.325
Stats 3108.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=389368 bytes_read=923913 bytes_retransmit=0 bytes_invalid=0 send_seq=22081 receive_seq=22081 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17248 bytes_read=55024 bytes_retransmit=0 bytes_invalid=0 send_seq=2849 receive_seq=2849 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999309  heater_bed: target=60 temp=59.9 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=1.43 cputime=260.347 memavail=698824 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.325
Stats 3109.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=389665 bytes_read=924362 bytes_retransmit=0 bytes_invalid=0 send_seq=22096 receive_seq=22095 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17254 bytes_read=55040 bytes_retransmit=0 bytes_invalid=0 send_seq=2850 receive_seq=2850 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999286  heater_bed: target=60 temp=59.9 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=1.43 cputime=260.460 memavail=698720 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.325
Stats 3110.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=389840 bytes_read=924787 bytes_retransmit=0 bytes_invalid=0 send_seq=22108 receive_seq=22107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17260 bytes_read=55056 bytes_retransmit=0 bytes_invalid=0 send_seq=2851 receive_seq=2851 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999279  heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.43 cputime=260.571 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.349
Stats 3111.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=390035 bytes_read=925261 bytes_retransmit=0 bytes_invalid=0 send_seq=22121 receive_seq=22120 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17266 bytes_read=55072 bytes_retransmit=0 bytes_invalid=0 send_seq=2852 receive_seq=2852 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999309  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.43 cputime=260.680 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.349
Stats 3112.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=390332 bytes_read=925715 bytes_retransmit=0 bytes_invalid=0 send_seq=22136 receive_seq=22135 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17272 bytes_read=55088 bytes_retransmit=0 bytes_invalid=0 send_seq=2853 receive_seq=2853 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999328  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.7 sysload=1.39 cputime=260.790 memavail=698628 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.349
Stats 3113.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=390614 bytes_read=926170 bytes_retransmit=0 bytes_invalid=0 send_seq=22151 receive_seq=22150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=17278 bytes_read=55117 bytes_retransmit=0 bytes_invalid=0 send_seq=2854 receive_seq=2854 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999326  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.39 cputime=260.905 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.349
Stats 3114.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=390805 bytes_read=926644 bytes_retransmit=0 bytes_invalid=0 send_seq=22164 receive_seq=22163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=17284 bytes_read=55133 bytes_retransmit=0 bytes_invalid=0 send_seq=2855 receive_seq=2855 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999344  heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=1.39 cputime=261.016 memavail=698836 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.287
Stats 3115.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=391053 bytes_read=927093 bytes_retransmit=0 bytes_invalid=0 send_seq=22178 receive_seq=22177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=17296 bytes_read=55165 bytes_retransmit=0 bytes_invalid=0 send_seq=2857 receive_seq=2857 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999340  heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=1.39 cputime=261.132 memavail=698964 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.287
Stats 3116.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=391330 bytes_read=927528 bytes_retransmit=0 bytes_invalid=0 send_seq=22192 receive_seq=22191 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=17302 bytes_read=55181 bytes_retransmit=0 bytes_invalid=0 send_seq=2858 receive_seq=2858 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999536  heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.39 cputime=261.250 memavail=699100 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.287
Stats 3117.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=391572 bytes_read=928017 bytes_retransmit=0 bytes_invalid=0 send_seq=22207 receive_seq=22207 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=17308 bytes_read=55197 bytes_retransmit=0 bytes_invalid=0 send_seq=2859 receive_seq=2859 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999567  heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=261.355 memavail=699100 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.287
Stats 3118.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=391794 bytes_read=928466 bytes_retransmit=0 bytes_invalid=0 send_seq=22221 receive_seq=22221 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=17314 bytes_read=55226 bytes_retransmit=0 bytes_invalid=0 send_seq=2860 receive_seq=2860 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999523  heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=261.466 memavail=699296 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.302
Stats 3119.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=392059 bytes_read=928926 bytes_retransmit=0 bytes_invalid=0 send_seq=22237 receive_seq=22237 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=17320 bytes_read=55242 bytes_retransmit=0 bytes_invalid=0 send_seq=2861 receive_seq=2861 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999466  heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=261.581 memavail=699352 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.302
Stats 3120.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=392324 bytes_read=929415 bytes_retransmit=0 bytes_invalid=0 send_seq=22253 receive_seq=22253 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=17326 bytes_read=55258 bytes_retransmit=0 bytes_invalid=0 send_seq=2862 receive_seq=2862 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999413  heater_bed: target=60 temp=59.9 pwm=0.122 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=261.698 memavail=699352 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.354
Stats 3121.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=392601 bytes_read=929864 bytes_retransmit=0 bytes_invalid=0 send_seq=22267 receive_seq=22267 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=17332 bytes_read=55274 bytes_retransmit=0 bytes_invalid=0 send_seq=2863 receive_seq=2863 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999411  heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.28 cputime=261.812 memavail=698948 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.354
Stats 3122.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=392850 bytes_read=930304 bytes_retransmit=0 bytes_invalid=0 send_seq=22282 receive_seq=22282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000014 mcu_task_stddev=0.000030 bytes_write=17338 bytes_read=55290 bytes_retransmit=0 bytes_invalid=0 send_seq=2864 receive_seq=2864 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999399  heater_bed: target=60 temp=59.9 pwm=0.192 raspberry_pi: temp=39.2 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=1.18 cputime=261.935 memavail=699112 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.354
Stats 3123.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=393072 bytes_read=930798 bytes_retransmit=0 bytes_invalid=0 send_seq=22296 receive_seq=22296 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17344 bytes_read=55319 bytes_retransmit=0 bytes_invalid=0 send_seq=2865 receive_seq=2865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999368  heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=1.18 cputime=262.055 memavail=699112 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.276
Stats 3124.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=393300 bytes_read=931241 bytes_retransmit=0 bytes_invalid=0 send_seq=22309 receive_seq=22309 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17350 bytes_read=55335 bytes_retransmit=0 bytes_invalid=0 send_seq=2866 receive_seq=2866 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999347  heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=38.6 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=1.18 cputime=262.168 memavail=699104 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.276
Stats 3125.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=393598 bytes_read=931674 bytes_retransmit=0 bytes_invalid=0 send_seq=22325 receive_seq=22325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17356 bytes_read=55351 bytes_retransmit=0 bytes_invalid=0 send_seq=2867 receive_seq=2867 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999315  heater_bed: target=60 temp=59.9 pwm=0.121 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=1.18 cputime=262.283 memavail=699604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.276
Stats 3126.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=393793 bytes_read=932140 bytes_retransmit=0 bytes_invalid=0 send_seq=22338 receive_seq=22338 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17362 bytes_read=55367 bytes_retransmit=0 bytes_invalid=0 send_seq=2868 receive_seq=2868 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999272  heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=1.18 cputime=262.372 memavail=699604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.276
Stats 3127.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=393988 bytes_read=932584 bytes_retransmit=0 bytes_invalid=0 send_seq=22351 receive_seq=22351 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17368 bytes_read=55383 bytes_retransmit=0 bytes_invalid=0 send_seq=2869 receive_seq=2869 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999299  heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=1.08 cputime=262.490 memavail=699368 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.338
Stats 3128.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=394286 bytes_read=933059 bytes_retransmit=0 bytes_invalid=0 send_seq=22367 receive_seq=22367 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17374 bytes_read=55412 bytes_retransmit=0 bytes_invalid=0 send_seq=2870 receive_seq=2870 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999232  heater_bed: target=60 temp=59.9 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=1.08 cputime=262.619 memavail=699368 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.338
Stats 3129.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=394465 bytes_read=933527 bytes_retransmit=0 bytes_invalid=0 send_seq=22379 receive_seq=22379 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17380 bytes_read=55428 bytes_retransmit=0 bytes_invalid=0 send_seq=2871 receive_seq=2871 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999293  heater_bed: target=60 temp=59.9 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=1.08 cputime=262.736 memavail=699368 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.338
Stats 3130.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=394747 bytes_read=933967 bytes_retransmit=0 bytes_invalid=0 send_seq=22394 receive_seq=22394 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17386 bytes_read=55444 bytes_retransmit=0 bytes_invalid=0 send_seq=2872 receive_seq=2872 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999350  heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=1.08 cputime=262.853 memavail=698948 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.338
Stats 3131.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=394942 bytes_read=934412 bytes_retransmit=0 bytes_invalid=0 send_seq=22407 receive_seq=22407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17392 bytes_read=55460 bytes_retransmit=0 bytes_invalid=0 send_seq=2873 receive_seq=2873 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999335  heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=1.08 cputime=262.968 memavail=699128 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.342
Stats 3132.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=395147 bytes_read=934885 bytes_retransmit=0 bytes_invalid=0 send_seq=22420 receive_seq=22420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17398 bytes_read=55476 bytes_retransmit=0 bytes_invalid=0 send_seq=2874 receive_seq=2874 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999304  heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.00 cputime=263.081 memavail=699128 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.342
Stats 3133.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=395396 bytes_read=935325 bytes_retransmit=0 bytes_invalid=0 send_seq=22435 receive_seq=22435 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17404 bytes_read=55505 bytes_retransmit=0 bytes_invalid=0 send_seq=2875 receive_seq=2875 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999309  heater_bed: target=60 temp=60.0 pwm=0.104 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=1.00 cputime=263.191 memavail=699072 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.342
Stats 3134.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=395646 bytes_read=935790 bytes_retransmit=0 bytes_invalid=0 send_seq=22450 receive_seq=22449 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17410 bytes_read=55521 bytes_retransmit=0 bytes_invalid=0 send_seq=2876 receive_seq=2876 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999308  heater_bed: target=60 temp=60.1 pwm=0.104 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=1.00 cputime=263.307 memavail=699128 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.284
Stats 3135.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=395825 bytes_read=936274 bytes_retransmit=0 bytes_invalid=0 send_seq=22462 receive_seq=22462 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17416 bytes_read=55537 bytes_retransmit=0 bytes_invalid=0 send_seq=2877 receive_seq=2877 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999276  heater_bed: target=60 temp=60.1 pwm=0.104 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=1.00 cputime=263.417 memavail=699528 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.284
Stats 3136.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=396058 bytes_read=936709 bytes_retransmit=0 bytes_invalid=0 send_seq=22476 receive_seq=22476 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17422 bytes_read=55553 bytes_retransmit=0 bytes_invalid=0 send_seq=2878 receive_seq=2878 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999260  heater_bed: target=60 temp=60.1 pwm=0.104 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=1.00 cputime=263.523 memavail=699512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.284
Stats 3137.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=396309 bytes_read=937193 bytes_retransmit=0 bytes_invalid=0 send_seq=22491 receive_seq=22491 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17428 bytes_read=55569 bytes_retransmit=0 bytes_invalid=0 send_seq=2879 receive_seq=2879 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999259  heater_bed: target=60 temp=60.2 pwm=0.079 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.92 cputime=263.659 memavail=699644 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.284
Stats 3138.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=396509 bytes_read=937657 bytes_retransmit=0 bytes_invalid=0 send_seq=22505 receive_seq=22505 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17434 bytes_read=55598 bytes_retransmit=0 bytes_invalid=0 send_seq=2880 receive_seq=2880 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999241  heater_bed: target=60 temp=60.2 pwm=0.079 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.6 sysload=0.92 cputime=263.778 memavail=699644 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.315
Stats 3139.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=396773 bytes_read=938092 bytes_retransmit=0 bytes_invalid=0 send_seq=22520 receive_seq=22519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17440 bytes_read=55614 bytes_retransmit=0 bytes_invalid=0 send_seq=2881 receive_seq=2881 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999241  heater_bed: target=60 temp=60.2 pwm=0.129 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.4 sysload=0.92 cputime=263.892 memavail=699656 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.315
Stats 3140.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=397007 bytes_read=938576 bytes_retransmit=0 bytes_invalid=0 send_seq=22535 receive_seq=22534 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17446 bytes_read=55630 bytes_retransmit=0 bytes_invalid=0 send_seq=2882 receive_seq=2882 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999248  heater_bed: target=60 temp=60.2 pwm=0.129 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.92 cputime=264.015 memavail=699656 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.377
Stats 3141.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=397260 bytes_read=939020 bytes_retransmit=0 bytes_invalid=0 send_seq=22548 receive_seq=22547 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17452 bytes_read=55646 bytes_retransmit=0 bytes_invalid=0 send_seq=2883 receive_seq=2883 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999245  heater_bed: target=60 temp=60.2 pwm=0.076 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.92 cputime=264.128 memavail=699656 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.377
Stats 3142.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=397505 bytes_read=939460 bytes_retransmit=0 bytes_invalid=0 send_seq=22563 receive_seq=22562 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17458 bytes_read=55662 bytes_retransmit=0 bytes_invalid=0 send_seq=2884 receive_seq=2884 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999293  heater_bed: target=60 temp=60.2 pwm=0.144 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.92 cputime=264.237 memavail=699656 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.318
Stats 3143.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=397699 bytes_read=939954 bytes_retransmit=0 bytes_invalid=0 send_seq=22576 receive_seq=22576 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17464 bytes_read=55690 bytes_retransmit=0 bytes_invalid=0 send_seq=2885 receive_seq=2885 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999298  heater_bed: target=60 temp=60.2 pwm=0.043 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.5 sysload=0.92 cputime=264.356 memavail=699656 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.318
Stats 3144.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=397905 bytes_read=940398 bytes_retransmit=0 bytes_invalid=0 send_seq=22589 receive_seq=22589 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17470 bytes_read=55705 bytes_retransmit=0 bytes_invalid=0 send_seq=2886 receive_seq=2886 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999336  heater_bed: target=60 temp=60.2 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.6 sysload=0.92 cputime=264.467 memavail=699408 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.256
Stats 3145.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=398099 bytes_read=940823 bytes_retransmit=0 bytes_invalid=0 send_seq=22602 receive_seq=22601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17476 bytes_read=55720 bytes_retransmit=0 bytes_invalid=0 send_seq=2887 receive_seq=2887 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999342  heater_bed: target=60 temp=60.2 pwm=0.081 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.92 cputime=264.580 memavail=699924 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.256
Stats 3146.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=398278 bytes_read=941297 bytes_retransmit=0 bytes_invalid=0 send_seq=22614 receive_seq=22614 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17482 bytes_read=55735 bytes_retransmit=0 bytes_invalid=0 send_seq=2888 receive_seq=2888 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999368  heater_bed: target=60 temp=60.2 pwm=0.081 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.92 cputime=264.692 memavail=699924 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.256
Stats 3147.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=398473 bytes_read=941741 bytes_retransmit=0 bytes_invalid=0 send_seq=22627 receive_seq=22627 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17488 bytes_read=55750 bytes_retransmit=0 bytes_invalid=0 send_seq=2889 receive_seq=2889 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999351  heater_bed: target=60 temp=60.2 pwm=0.081 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.85 cputime=264.804 memavail=699924 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.311
Stats 3148.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=398727 bytes_read=942177 bytes_retransmit=0 bytes_invalid=0 send_seq=22640 receive_seq=22639 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17494 bytes_read=55778 bytes_retransmit=0 bytes_invalid=0 send_seq=2890 receive_seq=2890 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999297  heater_bed: target=60 temp=60.2 pwm=0.081 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.85 cputime=264.920 memavail=699252 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.361
Stats 3149.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=398977 bytes_read=942649 bytes_retransmit=0 bytes_invalid=0 send_seq=22656 receive_seq=22655 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17500 bytes_read=55794 bytes_retransmit=0 bytes_invalid=0 send_seq=2891 receive_seq=2891 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999249  heater_bed: target=60 temp=60.2 pwm=0.117 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.85 cputime=265.031 memavail=699424 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.361
Stats 3150.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=399153 bytes_read=943092 bytes_retransmit=0 bytes_invalid=0 send_seq=22668 receive_seq=22668 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17506 bytes_read=55810 bytes_retransmit=0 bytes_invalid=0 send_seq=2892 receive_seq=2892 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999229  heater_bed: target=60 temp=60.2 pwm=0.117 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.85 cputime=265.131 memavail=699424 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.361
Stats 3151.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=399332 bytes_read=943517 bytes_retransmit=0 bytes_invalid=0 send_seq=22680 receive_seq=22680 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17512 bytes_read=55826 bytes_retransmit=0 bytes_invalid=0 send_seq=2893 receive_seq=2893 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999266  heater_bed: target=60 temp=60.1 pwm=0.117 raspberry_pi: temp=38.6 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.85 cputime=265.237 memavail=699320 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.361
Stats 3152.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=399641 bytes_read=944006 bytes_retransmit=0 bytes_invalid=0 send_seq=22696 receive_seq=22696 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17518 bytes_read=55842 bytes_retransmit=0 bytes_invalid=0 send_seq=2894 receive_seq=2894 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999269  heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.78 cputime=265.354 memavail=699432 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.315
Stats 3153.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=399820 bytes_read=944445 bytes_retransmit=0 bytes_invalid=0 send_seq=22708 receive_seq=22708 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17524 bytes_read=55871 bytes_retransmit=0 bytes_invalid=0 send_seq=2895 receive_seq=2895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999676 adj=49999254  heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=36.8 chamber: temp=21.6 sysload=0.78 cputime=265.465 memavail=699432 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.315
Stats 3154.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=400031 bytes_read=944895 bytes_retransmit=0 bytes_invalid=0 send_seq=22722 receive_seq=22722 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17530 bytes_read=55887 bytes_retransmit=0 bytes_invalid=0 send_seq=2896 receive_seq=2896 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999262  heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.78 cputime=265.578 memavail=699444 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.253
Stats 3155.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=400221 bytes_read=945364 bytes_retransmit=0 bytes_invalid=0 send_seq=22734 receive_seq=22734 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17536 bytes_read=55903 bytes_retransmit=0 bytes_invalid=0 send_seq=2897 receive_seq=2897 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999260  heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.78 cputime=265.697 memavail=699192 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.253
Stats 3156.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=400416 bytes_read=945808 bytes_retransmit=0 bytes_invalid=0 send_seq=22747 receive_seq=22747 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17542 bytes_read=55919 bytes_retransmit=0 bytes_invalid=0 send_seq=2898 receive_seq=2898 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999354  heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=36.9 chamber: temp=21.7 sysload=0.78 cputime=265.825 memavail=699192 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.253
Stats 3157.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=400611 bytes_read=946238 bytes_retransmit=0 bytes_invalid=0 send_seq=22760 receive_seq=22760 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17548 bytes_read=55935 bytes_retransmit=0 bytes_invalid=0 send_seq=2899 receive_seq=2899 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999373  heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.72 cputime=265.941 memavail=698940 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.315
Stats 3158.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=400790 bytes_read=946721 bytes_retransmit=0 bytes_invalid=0 send_seq=22772 receive_seq=22772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17554 bytes_read=55964 bytes_retransmit=0 bytes_invalid=0 send_seq=2900 receive_seq=2900 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999384  heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.72 cputime=266.057 memavail=698940 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.385
Stats 3159.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=400999 bytes_read=947161 bytes_retransmit=0 bytes_invalid=0 send_seq=22785 receive_seq=22784 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17560 bytes_read=55980 bytes_retransmit=0 bytes_invalid=0 send_seq=2901 receive_seq=2901 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999386  heater_bed: target=60 temp=59.9 pwm=0.200 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.72 cputime=266.184 memavail=698940 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.385
Stats 3160.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=401199 bytes_read=947611 bytes_retransmit=0 bytes_invalid=0 send_seq=22799 receive_seq=22798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17566 bytes_read=55996 bytes_retransmit=0 bytes_invalid=0 send_seq=2902 receive_seq=2902 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999383  heater_bed: target=60 temp=59.9 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.72 cputime=266.305 memavail=698952 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.385
Stats 3161.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=401370 bytes_read=948079 bytes_retransmit=0 bytes_invalid=0 send_seq=22810 receive_seq=22810 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17572 bytes_read=56012 bytes_retransmit=0 bytes_invalid=0 send_seq=2903 receive_seq=2903 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999347  heater_bed: target=60 temp=59.9 pwm=0.148 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.72 cputime=266.414 memavail=698952 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.385
Stats 3162.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=401560 bytes_read=948504 bytes_retransmit=0 bytes_invalid=0 send_seq=22822 receive_seq=22822 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17578 bytes_read=56028 bytes_retransmit=0 bytes_invalid=0 send_seq=2904 receive_seq=2904 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999338  heater_bed: target=60 temp=59.9 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.66 cputime=266.529 memavail=698952 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.334
Stats 3163.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=401771 bytes_read=948954 bytes_retransmit=0 bytes_invalid=0 send_seq=22836 receive_seq=22836 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17584 bytes_read=56057 bytes_retransmit=0 bytes_invalid=0 send_seq=2905 receive_seq=2905 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999336  heater_bed: target=60 temp=59.8 pwm=0.229 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.66 cputime=266.642 memavail=698700 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.257
Stats 3164.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=401966 bytes_read=949442 bytes_retransmit=0 bytes_invalid=0 send_seq=22849 receive_seq=22849 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17590 bytes_read=56073 bytes_retransmit=0 bytes_invalid=0 send_seq=2906 receive_seq=2906 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999334  heater_bed: target=60 temp=59.8 pwm=0.168 raspberry_pi: temp=38.6 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=0.66 cputime=266.757 memavail=698700 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.257
Stats 3165.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=402145 bytes_read=949867 bytes_retransmit=0 bytes_invalid=0 send_seq=22861 receive_seq=22861 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17596 bytes_read=56089 bytes_retransmit=0 bytes_invalid=0 send_seq=2907 receive_seq=2907 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999331  heater_bed: target=60 temp=59.8 pwm=0.168 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=0.66 cputime=266.868 memavail=698964 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.257
Stats 3166.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=402348 bytes_read=950341 bytes_retransmit=0 bytes_invalid=0 send_seq=22875 receive_seq=22874 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17602 bytes_read=56105 bytes_retransmit=0 bytes_invalid=0 send_seq=2908 receive_seq=2908 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999315  heater_bed: target=60 temp=59.9 pwm=0.110 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.66 cputime=266.998 memavail=698964 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.257
Stats 3167.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=402549 bytes_read=950780 bytes_retransmit=0 bytes_invalid=0 send_seq=22887 receive_seq=22886 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17608 bytes_read=56121 bytes_retransmit=0 bytes_invalid=0 send_seq=2909 receive_seq=2909 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999297  heater_bed: target=60 temp=59.9 pwm=0.110 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.69 cputime=267.113 memavail=698964 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.355
Stats 3168.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=402744 bytes_read=951210 bytes_retransmit=0 bytes_invalid=0 send_seq=22900 receive_seq=22899 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17614 bytes_read=56150 bytes_retransmit=0 bytes_invalid=0 send_seq=2910 receive_seq=2910 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999294  heater_bed: target=60 temp=59.9 pwm=0.166 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.69 cputime=267.236 memavail=698860 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.355
Stats 3169.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=402950 bytes_read=951704 bytes_retransmit=0 bytes_invalid=0 send_seq=22914 receive_seq=22913 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17620 bytes_read=56166 bytes_retransmit=0 bytes_invalid=0 send_seq=2911 receive_seq=2911 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999316  heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.69 cputime=267.359 memavail=698964 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.355
Stats 3170.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=403262 bytes_read=952168 bytes_retransmit=0 bytes_invalid=0 send_seq=22931 receive_seq=22930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17632 bytes_read=56198 bytes_retransmit=0 bytes_invalid=0 send_seq=2913 receive_seq=2913 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999355  heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.69 cputime=267.482 memavail=698964 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.417
Stats 3171.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=403429 bytes_read=952593 bytes_retransmit=0 bytes_invalid=0 send_seq=22942 receive_seq=22942 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17638 bytes_read=56214 bytes_retransmit=0 bytes_invalid=0 send_seq=2914 receive_seq=2914 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999467  heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.69 cputime=267.584 memavail=696796 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.357
Stats 3172.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=403669 bytes_read=953075 bytes_retransmit=0 bytes_invalid=0 send_seq=22959 receive_seq=22958 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17644 bytes_read=56230 bytes_retransmit=0 bytes_invalid=0 send_seq=2915 receive_seq=2915 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999415  heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.71 cputime=267.673 memavail=699228 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.289
Stats 3173.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=403859 bytes_read=953500 bytes_retransmit=0 bytes_invalid=0 send_seq=22971 receive_seq=22970 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17650 bytes_read=56259 bytes_retransmit=0 bytes_invalid=0 send_seq=2916 receive_seq=2916 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999420  heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.71 cputime=267.778 memavail=699228 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.289
Stats 3174.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=404167 bytes_read=953955 bytes_retransmit=0 bytes_invalid=0 send_seq=22986 receive_seq=22985 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17656 bytes_read=56275 bytes_retransmit=0 bytes_invalid=0 send_seq=2917 receive_seq=2917 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999395  heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.7 sysload=0.71 cputime=267.897 memavail=698916 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.224
Stats 3175.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=404404 bytes_read=954439 bytes_retransmit=0 bytes_invalid=0 send_seq=23001 receive_seq=23000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17662 bytes_read=56291 bytes_retransmit=0 bytes_invalid=0 send_seq=2918 receive_seq=2918 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999371  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.71 cputime=268.014 memavail=697980 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.224
Stats 3176.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=404638 bytes_read=954893 bytes_retransmit=0 bytes_invalid=0 send_seq=23015 receive_seq=23015 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17668 bytes_read=56307 bytes_retransmit=0 bytes_invalid=0 send_seq=2919 receive_seq=2919 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999409  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=38.6 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.71 cputime=268.132 memavail=697980 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.279
Stats 3177.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=404872 bytes_read=955333 bytes_retransmit=0 bytes_invalid=0 send_seq=23030 receive_seq=23030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17674 bytes_read=56323 bytes_retransmit=0 bytes_invalid=0 send_seq=2920 receive_seq=2920 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999393  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=0.74 cputime=268.253 memavail=698168 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.339
Stats 3178.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=405043 bytes_read=955797 bytes_retransmit=0 bytes_invalid=0 send_seq=23041 receive_seq=23041 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17680 bytes_read=56352 bytes_retransmit=0 bytes_invalid=0 send_seq=2921 receive_seq=2921 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999391  heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.6 sysload=0.74 cputime=268.351 memavail=698232 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.339
Stats 3179.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=405249 bytes_read=956256 bytes_retransmit=0 bytes_invalid=0 send_seq=23054 receive_seq=23054 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17686 bytes_read=56368 bytes_retransmit=0 bytes_invalid=0 send_seq=2922 receive_seq=2922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999368  heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.5 sysload=0.74 cputime=268.466 memavail=698232 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.397
Stats 3180.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=405428 bytes_read=956681 bytes_retransmit=0 bytes_invalid=0 send_seq=23066 receive_seq=23066 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17692 bytes_read=56384 bytes_retransmit=0 bytes_invalid=0 send_seq=2923 receive_seq=2923 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999382  heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.74 cputime=268.574 memavail=698232 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.397
Stats 3181.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=405639 bytes_read=957160 bytes_retransmit=0 bytes_invalid=0 send_seq=23080 receive_seq=23080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17698 bytes_read=56400 bytes_retransmit=0 bytes_invalid=0 send_seq=2924 receive_seq=2924 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999366  heater_bed: target=60 temp=59.9 pwm=0.197 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.74 cputime=268.687 memavail=698232 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.397
Stats 3182.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=405845 bytes_read=957604 bytes_retransmit=0 bytes_invalid=0 send_seq=23093 receive_seq=23093 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17704 bytes_read=56416 bytes_retransmit=0 bytes_invalid=0 send_seq=2925 receive_seq=2925 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999403  heater_bed: target=60 temp=59.9 pwm=0.141 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=0.76 cputime=268.800 memavail=698232 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.324
Stats 3183.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=406146 bytes_read=958079 bytes_retransmit=0 bytes_invalid=0 send_seq=23109 receive_seq=23109 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17710 bytes_read=56445 bytes_retransmit=0 bytes_invalid=0 send_seq=2926 receive_seq=2926 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999372  heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.76 cputime=268.933 memavail=698252 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.249
Stats 3184.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=406361 bytes_read=958562 bytes_retransmit=0 bytes_invalid=0 send_seq=23124 receive_seq=23124 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17716 bytes_read=56461 bytes_retransmit=0 bytes_invalid=0 send_seq=2927 receive_seq=2927 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999344  heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.76 cputime=269.055 memavail=698508 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.249
Stats 3185.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=406577 bytes_read=958997 bytes_retransmit=0 bytes_invalid=0 send_seq=23139 receive_seq=23138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17722 bytes_read=56477 bytes_retransmit=0 bytes_invalid=0 send_seq=2928 receive_seq=2928 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999358  heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.76 cputime=269.160 memavail=699016 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.248
Stats 3186.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=406782 bytes_read=959442 bytes_retransmit=0 bytes_invalid=0 send_seq=23152 receive_seq=23151 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17728 bytes_read=56493 bytes_retransmit=0 bytes_invalid=0 send_seq=2929 receive_seq=2929 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999349  heater_bed: target=60 temp=60.0 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.76 cputime=269.267 memavail=698960 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.248
Stats 3187.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000012 bytes_write=406983 bytes_read=959936 bytes_retransmit=0 bytes_invalid=0 send_seq=23166 receive_seq=23166 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17734 bytes_read=56509 bytes_retransmit=0 bytes_invalid=0 send_seq=2930 receive_seq=2930 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999351  heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.78 cputime=269.376 memavail=699016 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.312
Stats 3188.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=407173 bytes_read=960371 bytes_retransmit=0 bytes_invalid=0 send_seq=23178 receive_seq=23177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17740 bytes_read=56538 bytes_retransmit=0 bytes_invalid=0 send_seq=2931 receive_seq=2931 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999259  heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.78 cputime=269.486 memavail=699016 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.379
Stats 3189.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=407368 bytes_read=960811 bytes_retransmit=0 bytes_invalid=0 send_seq=23190 receive_seq=23189 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17746 bytes_read=56554 bytes_retransmit=0 bytes_invalid=0 send_seq=2932 receive_seq=2932 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999300  heater_bed: target=60 temp=60.1 pwm=0.054 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.7 sysload=0.78 cputime=269.598 memavail=699016 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.379
Stats 3190.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=407563 bytes_read=961284 bytes_retransmit=0 bytes_invalid=0 send_seq=23203 receive_seq=23202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17752 bytes_read=56570 bytes_retransmit=0 bytes_invalid=0 send_seq=2933 receive_seq=2933 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999302  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.78 cputime=269.709 memavail=698776 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.379
Stats 3191.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=407756 bytes_read=961724 bytes_retransmit=0 bytes_invalid=0 send_seq=23217 receive_seq=23217 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17758 bytes_read=56586 bytes_retransmit=0 bytes_invalid=0 send_seq=2934 receive_seq=2934 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999299  heater_bed: target=60 temp=60.2 pwm=0.060 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.78 cputime=269.818 memavail=698776 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.379
Stats 3192.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=407951 bytes_read=962178 bytes_retransmit=0 bytes_invalid=0 send_seq=23230 receive_seq=23229 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=17764 bytes_read=56602 bytes_retransmit=0 bytes_invalid=0 send_seq=2935 receive_seq=2935 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999295  heater_bed: target=60 temp=60.2 pwm=0.060 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.80 cputime=269.942 memavail=698776 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.298
Stats 3193.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=408169 bytes_read=962662 bytes_retransmit=0 bytes_invalid=0 send_seq=23244 receive_seq=23244 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17770 bytes_read=56631 bytes_retransmit=0 bytes_invalid=0 send_seq=2936 receive_seq=2936 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999299  heater_bed: target=60 temp=60.2 pwm=0.079 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.80 cputime=270.012 memavail=698776 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.242
Stats 3194.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=408353 bytes_read=963092 bytes_retransmit=0 bytes_invalid=0 send_seq=23257 receive_seq=23257 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17776 bytes_read=56647 bytes_retransmit=0 bytes_invalid=0 send_seq=2937 receive_seq=2937 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999240  heater_bed: target=60 temp=60.2 pwm=0.079 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.7 sysload=0.80 cputime=270.129 memavail=698776 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.242
Stats 3195.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=408548 bytes_read=963551 bytes_retransmit=0 bytes_invalid=0 send_seq=23270 receive_seq=23270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17782 bytes_read=56663 bytes_retransmit=0 bytes_invalid=0 send_seq=2938 receive_seq=2938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999308  heater_bed: target=60 temp=60.2 pwm=0.133 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.7 sysload=0.80 cputime=270.242 memavail=698332 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.242
Stats 3196.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=408769 bytes_read=964002 bytes_retransmit=0 bytes_invalid=0 send_seq=23284 receive_seq=23284 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17788 bytes_read=56679 bytes_retransmit=0 bytes_invalid=0 send_seq=2939 receive_seq=2939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999297  heater_bed: target=60 temp=60.2 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.80 cputime=270.356 memavail=698528 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.314
Stats 3197.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=408991 bytes_read=964428 bytes_retransmit=0 bytes_invalid=0 send_seq=23298 receive_seq=23298 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17794 bytes_read=56695 bytes_retransmit=0 bytes_invalid=0 send_seq=2940 receive_seq=2940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999334  heater_bed: target=60 temp=60.2 pwm=0.119 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.5 sysload=0.81 cputime=270.466 memavail=698528 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.379
Stats 3198.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=409234 bytes_read=964927 bytes_retransmit=0 bytes_invalid=0 send_seq=23314 receive_seq=23313 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17800 bytes_read=56724 bytes_retransmit=0 bytes_invalid=0 send_seq=2941 receive_seq=2941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999360  heater_bed: target=60 temp=60.2 pwm=0.092 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.81 cputime=270.595 memavail=698512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.379
Stats 3199.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=409424 bytes_read=965371 bytes_retransmit=0 bytes_invalid=0 send_seq=23326 receive_seq=23326 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17806 bytes_read=56740 bytes_retransmit=0 bytes_invalid=0 send_seq=2942 receive_seq=2942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999339  heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.81 cputime=270.698 memavail=698532 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.379
Stats 3200.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=409619 bytes_read=965801 bytes_retransmit=0 bytes_invalid=0 send_seq=23339 receive_seq=23339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17812 bytes_read=56756 bytes_retransmit=0 bytes_invalid=0 send_seq=2943 receive_seq=2943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999314  heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.81 cputime=270.809 memavail=698532 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.379
Stats 3201.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=409814 bytes_read=966275 bytes_retransmit=0 bytes_invalid=0 send_seq=23352 receive_seq=23352 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17818 bytes_read=56772 bytes_retransmit=0 bytes_invalid=0 send_seq=2944 receive_seq=2944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999287  heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.81 cputime=270.925 memavail=698428 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.320
Stats 3202.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=410009 bytes_read=966719 bytes_retransmit=0 bytes_invalid=0 send_seq=23365 receive_seq=23365 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=17824 bytes_read=56788 bytes_retransmit=0 bytes_invalid=0 send_seq=2945 receive_seq=2945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999270  heater_bed: target=60 temp=60.1 pwm=0.152 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.83 cputime=271.035 memavail=698784 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.320
Stats 3203.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=410204 bytes_read=967149 bytes_retransmit=0 bytes_invalid=0 send_seq=23378 receive_seq=23378 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17830 bytes_read=56817 bytes_retransmit=0 bytes_invalid=0 send_seq=2946 receive_seq=2946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999278  heater_bed: target=60 temp=60.1 pwm=0.152 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.83 cputime=271.147 memavail=698784 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.246
Stats 3204.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=410383 bytes_read=967633 bytes_retransmit=0 bytes_invalid=0 send_seq=23390 receive_seq=23390 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17836 bytes_read=56833 bytes_retransmit=0 bytes_invalid=0 send_seq=2947 receive_seq=2947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999274  heater_bed: target=60 temp=60.1 pwm=0.152 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.83 cputime=271.258 memavail=698688 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.246
Stats 3205.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=410562 bytes_read=968072 bytes_retransmit=0 bytes_invalid=0 send_seq=23402 receive_seq=23402 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17842 bytes_read=56849 bytes_retransmit=0 bytes_invalid=0 send_seq=2948 receive_seq=2948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999286  heater_bed: target=60 temp=60.1 pwm=0.152 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.83 cputime=271.365 memavail=698552 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.246
Stats 3206.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=410757 bytes_read=968502 bytes_retransmit=0 bytes_invalid=0 send_seq=23415 receive_seq=23415 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17848 bytes_read=56865 bytes_retransmit=0 bytes_invalid=0 send_seq=2949 receive_seq=2949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999303  heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.83 cputime=271.475 memavail=698552 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.246
Stats 3207.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=410983 bytes_read=968986 bytes_retransmit=0 bytes_invalid=0 send_seq=23430 receive_seq=23430 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=17854 bytes_read=56881 bytes_retransmit=0 bytes_invalid=0 send_seq=2950 receive_seq=2950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999267  heater_bed: target=60 temp=60.1 pwm=0.119 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.6 sysload=0.84 cputime=271.589 memavail=698552 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.317
Stats 3208.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=411231 bytes_read=969460 bytes_retransmit=0 bytes_invalid=0 send_seq=23446 receive_seq=23446 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17860 bytes_read=56910 bytes_retransmit=0 bytes_invalid=0 send_seq=2951 receive_seq=2951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999229  heater_bed: target=60 temp=60.1 pwm=0.041 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.84 cputime=271.725 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.379
Stats 3209.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=411431 bytes_read=969895 bytes_retransmit=0 bytes_invalid=0 send_seq=23460 receive_seq=23460 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17866 bytes_read=56926 bytes_retransmit=0 bytes_invalid=0 send_seq=2952 receive_seq=2952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999260  heater_bed: target=60 temp=60.1 pwm=0.161 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.84 cputime=271.847 memavail=698560 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.379
Stats 3210.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=411663 bytes_read=970384 bytes_retransmit=0 bytes_invalid=0 send_seq=23476 receive_seq=23476 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17872 bytes_read=56942 bytes_retransmit=0 bytes_invalid=0 send_seq=2953 receive_seq=2953 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999311  heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.8 sysload=0.84 cputime=271.966 memavail=698364 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.379
Stats 3211.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=411874 bytes_read=970833 bytes_retransmit=0 bytes_invalid=0 send_seq=23490 receive_seq=23490 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17878 bytes_read=56958 bytes_retransmit=0 bytes_invalid=0 send_seq=2954 receive_seq=2954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999313  heater_bed: target=60 temp=60.0 pwm=0.131 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.84 cputime=272.078 memavail=698564 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.379
Stats 3212.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=412069 bytes_read=971263 bytes_retransmit=0 bytes_invalid=0 send_seq=23503 receive_seq=23503 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=17884 bytes_read=56974 bytes_retransmit=0 bytes_invalid=0 send_seq=2955 receive_seq=2955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999333  heater_bed: target=60 temp=60.0 pwm=0.131 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.85 cputime=272.190 memavail=698564 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.333
Stats 3213.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=412301 bytes_read=971767 bytes_retransmit=0 bytes_invalid=0 send_seq=23519 receive_seq=23519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17890 bytes_read=57003 bytes_retransmit=0 bytes_invalid=0 send_seq=2956 receive_seq=2956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999376  heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.85 cputime=272.293 memavail=698160 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.250
Stats 3214.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=412491 bytes_read=972206 bytes_retransmit=0 bytes_invalid=0 send_seq=23531 receive_seq=23531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17896 bytes_read=57019 bytes_retransmit=0 bytes_invalid=0 send_seq=2957 receive_seq=2957 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999372  heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=38.6 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=0.85 cputime=272.416 memavail=698312 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.250
Stats 3215.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=412686 bytes_read=972651 bytes_retransmit=0 bytes_invalid=0 send_seq=23544 receive_seq=23544 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17902 bytes_read=57035 bytes_retransmit=0 bytes_invalid=0 send_seq=2958 receive_seq=2958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999366  heater_bed: target=60 temp=59.8 pwm=0.162 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.8 sysload=0.85 cputime=272.529 memavail=698324 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.199
Stats 3216.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=412886 bytes_read=973129 bytes_retransmit=0 bytes_invalid=0 send_seq=23558 receive_seq=23558 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17908 bytes_read=57051 bytes_retransmit=0 bytes_invalid=0 send_seq=2959 receive_seq=2959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999303  heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.85 cputime=272.649 memavail=698220 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.258
Stats 3217.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=413086 bytes_read=973564 bytes_retransmit=0 bytes_invalid=0 send_seq=23572 receive_seq=23572 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=17914 bytes_read=57067 bytes_retransmit=0 bytes_invalid=0 send_seq=2960 receive_seq=2960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999315  heater_bed: target=60 temp=59.8 pwm=0.162 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.87 cputime=272.773 memavail=698324 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.354
Stats 3218.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=413286 bytes_read=974029 bytes_retransmit=0 bytes_invalid=0 send_seq=23586 receive_seq=23586 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17920 bytes_read=57096 bytes_retransmit=0 bytes_invalid=0 send_seq=2961 receive_seq=2961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999297  heater_bed: target=60 temp=59.8 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.87 cputime=272.894 memavail=698324 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.354
Stats 3219.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=413513 bytes_read=974512 bytes_retransmit=0 bytes_invalid=0 send_seq=23601 receive_seq=23601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17926 bytes_read=57112 bytes_retransmit=0 bytes_invalid=0 send_seq=2962 receive_seq=2962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999296  heater_bed: target=60 temp=59.8 pwm=0.197 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.87 cputime=273.004 memavail=698208 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.425
Stats 3220.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=413697 bytes_read=974929 bytes_retransmit=0 bytes_invalid=0 send_seq=23614 receive_seq=23614 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17932 bytes_read=57128 bytes_retransmit=0 bytes_invalid=0 send_seq=2963 receive_seq=2963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999267  heater_bed: target=60 temp=59.7 pwm=0.197 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.87 cputime=273.112 memavail=698336 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.4 pwm=0.425
Stats 3221.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=413908 bytes_read=975370 bytes_retransmit=0 bytes_invalid=0 send_seq=23628 receive_seq=23628 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17938 bytes_read=57144 bytes_retransmit=0 bytes_invalid=0 send_seq=2964 receive_seq=2964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999259  heater_bed: target=60 temp=59.8 pwm=0.163 raspberry_pi: temp=38.6 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=0.87 cputime=273.224 memavail=698336 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.359
Stats 3222.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=414135 bytes_read=975853 bytes_retransmit=0 bytes_invalid=0 send_seq=23643 receive_seq=23643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=17944 bytes_read=57160 bytes_retransmit=0 bytes_invalid=0 send_seq=2965 receive_seq=2965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999276  heater_bed: target=60 temp=59.9 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.88 cputime=273.335 memavail=698336 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.298
Stats 3223.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=414330 bytes_read=976283 bytes_retransmit=0 bytes_invalid=0 send_seq=23656 receive_seq=23656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17956 bytes_read=57205 bytes_retransmit=0 bytes_invalid=0 send_seq=2967 receive_seq=2967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999300  heater_bed: target=60 temp=59.9 pwm=0.098 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.88 cputime=273.453 memavail=698336 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.211
Stats 3224.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=414514 bytes_read=976757 bytes_retransmit=0 bytes_invalid=0 send_seq=23669 receive_seq=23669 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17962 bytes_read=57221 bytes_retransmit=0 bytes_invalid=0 send_seq=2968 receive_seq=2968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999374  heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.5 sysload=0.88 cputime=273.572 memavail=698328 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.211
Stats 3225.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=414698 bytes_read=977216 bytes_retransmit=0 bytes_invalid=0 send_seq=23682 receive_seq=23682 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17968 bytes_read=57237 bytes_retransmit=0 bytes_invalid=0 send_seq=2969 receive_seq=2969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999373  heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.88 cputime=273.682 memavail=698800 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.267
Stats 3226.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=414908 bytes_read=977651 bytes_retransmit=0 bytes_invalid=0 send_seq=23696 receive_seq=23696 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17974 bytes_read=57253 bytes_retransmit=0 bytes_invalid=0 send_seq=2970 receive_seq=2970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999335  heater_bed: target=60 temp=60.0 pwm=0.057 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=0.88 cputime=273.794 memavail=698848 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.267
Stats 3227.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=415108 bytes_read=978130 bytes_retransmit=0 bytes_invalid=0 send_seq=23710 receive_seq=23710 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=17980 bytes_read=57269 bytes_retransmit=0 bytes_invalid=0 send_seq=2971 receive_seq=2971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999342  heater_bed: target=60 temp=60.1 pwm=0.057 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.89 cputime=273.911 memavail=698848 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.367
Stats 3228.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=415308 bytes_read=978579 bytes_retransmit=0 bytes_invalid=0 send_seq=23724 receive_seq=23724 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17986 bytes_read=57298 bytes_retransmit=0 bytes_invalid=0 send_seq=2972 receive_seq=2972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999357  heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=0.89 cputime=274.032 memavail=698956 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.419
Stats 3229.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=415508 bytes_read=979029 bytes_retransmit=0 bytes_invalid=0 send_seq=23738 receive_seq=23738 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17992 bytes_read=57313 bytes_retransmit=0 bytes_invalid=0 send_seq=2973 receive_seq=2973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999381  heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.89 cputime=274.139 memavail=699116 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.419
Stats 3230.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=415708 bytes_read=979508 bytes_retransmit=0 bytes_invalid=0 send_seq=23752 receive_seq=23752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=17998 bytes_read=57328 bytes_retransmit=0 bytes_invalid=0 send_seq=2974 receive_seq=2974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999354  heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.89 cputime=274.267 memavail=699116 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.363
Stats 3231.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=415908 bytes_read=979957 bytes_retransmit=0 bytes_invalid=0 send_seq=23766 receive_seq=23766 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18004 bytes_read=57343 bytes_retransmit=0 bytes_invalid=0 send_seq=2975 receive_seq=2975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999311  heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.89 cputime=274.354 memavail=699080 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.293
Stats 3232.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=416123 bytes_read=980397 bytes_retransmit=0 bytes_invalid=0 send_seq=23781 receive_seq=23781 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18010 bytes_read=57358 bytes_retransmit=0 bytes_invalid=0 send_seq=2976 receive_seq=2976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999680 adj=49999289  heater_bed: target=60 temp=60.2 pwm=0.050 raspberry_pi: temp=39.2 mcu_temp: temp=37.0 chamber: temp=21.5 sysload=0.90 cputime=274.473 memavail=699112 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.230
Stats 3233.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=416307 bytes_read=980871 bytes_retransmit=0 bytes_invalid=0 send_seq=23794 receive_seq=23794 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18016 bytes_read=57386 bytes_retransmit=0 bytes_invalid=0 send_seq=2977 receive_seq=2977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999279  heater_bed: target=60 temp=60.2 pwm=0.050 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.7 sysload=0.90 cputime=274.589 memavail=699112 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.230
Stats 3234.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=416491 bytes_read=981330 bytes_retransmit=0 bytes_invalid=0 send_seq=23807 receive_seq=23807 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18022 bytes_read=57402 bytes_retransmit=0 bytes_invalid=0 send_seq=2978 receive_seq=2978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999335  heater_bed: target=60 temp=60.2 pwm=0.050 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.90 cputime=274.696 memavail=699036 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.230
Stats 3235.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=416691 bytes_read=981765 bytes_retransmit=0 bytes_invalid=0 send_seq=23821 receive_seq=23821 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18028 bytes_read=57418 bytes_retransmit=0 bytes_invalid=0 send_seq=2979 receive_seq=2979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999386  heater_bed: target=60 temp=60.2 pwm=0.050 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.90 cputime=274.815 memavail=698864 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.293
Stats 3236.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=416891 bytes_read=982244 bytes_retransmit=0 bytes_invalid=0 send_seq=23835 receive_seq=23835 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18034 bytes_read=57434 bytes_retransmit=0 bytes_invalid=0 send_seq=2980 receive_seq=2980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999371  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.90 cputime=274.927 memavail=698864 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.293
Stats 3237.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=417091 bytes_read=982693 bytes_retransmit=0 bytes_invalid=0 send_seq=23849 receive_seq=23849 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18040 bytes_read=57450 bytes_retransmit=0 bytes_invalid=0 send_seq=2981 receive_seq=2981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999427  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.6 sysload=0.90 cputime=275.033 memavail=698696 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.357
Stats 3238.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=417286 bytes_read=983123 bytes_retransmit=0 bytes_invalid=0 send_seq=23862 receive_seq=23862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18046 bytes_read=57466 bytes_retransmit=0 bytes_invalid=0 send_seq=2982 receive_seq=2982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999452  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.90 cputime=275.151 memavail=698864 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.419
Stats 3239.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=417496 bytes_read=983617 bytes_retransmit=0 bytes_invalid=0 send_seq=23876 receive_seq=23876 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18052 bytes_read=57495 bytes_retransmit=0 bytes_invalid=0 send_seq=2983 receive_seq=2983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999439  heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.90 cputime=275.271 memavail=698864 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.419
Stats 3240.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=417727 bytes_read=984076 bytes_retransmit=0 bytes_invalid=0 send_seq=23892 receive_seq=23892 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18058 bytes_read=57511 bytes_retransmit=0 bytes_invalid=0 send_seq=2984 receive_seq=2984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999404  heater_bed: target=60 temp=60.2 pwm=0.064 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.90 cputime=275.390 memavail=698760 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.306
Stats 3241.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=417946 bytes_read=984516 bytes_retransmit=0 bytes_invalid=0 send_seq=23908 receive_seq=23907 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18064 bytes_read=57527 bytes_retransmit=0 bytes_invalid=0 send_seq=2985 receive_seq=2985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999332  heater_bed: target=60 temp=60.2 pwm=0.090 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.90 cputime=275.508 memavail=698876 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.306
Stats 3242.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=418146 bytes_read=985011 bytes_retransmit=0 bytes_invalid=0 send_seq=23922 receive_seq=23922 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18070 bytes_read=57543 bytes_retransmit=0 bytes_invalid=0 send_seq=2986 receive_seq=2986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999351  heater_bed: target=60 temp=60.2 pwm=0.090 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.91 cputime=275.626 memavail=698876 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.214
Stats 3243.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=418356 bytes_read=985456 bytes_retransmit=0 bytes_invalid=0 send_seq=23936 receive_seq=23936 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18076 bytes_read=57559 bytes_retransmit=0 bytes_invalid=0 send_seq=2987 receive_seq=2987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999336  heater_bed: target=60 temp=60.2 pwm=0.119 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.91 cputime=275.742 memavail=698732 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.214
Stats 3244.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=418556 bytes_read=985893 bytes_retransmit=0 bytes_invalid=0 send_seq=23950 receive_seq=23950 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18082 bytes_read=57588 bytes_retransmit=0 bytes_invalid=0 send_seq=2988 receive_seq=2988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999342  heater_bed: target=60 temp=60.2 pwm=0.119 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.91 cputime=275.857 memavail=698892 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.277
Stats 3245.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=418740 bytes_read=986363 bytes_retransmit=0 bytes_invalid=0 send_seq=23963 receive_seq=23963 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18088 bytes_read=57604 bytes_retransmit=0 bytes_invalid=0 send_seq=2989 receive_seq=2989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999321  heater_bed: target=60 temp=60.1 pwm=0.119 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.91 cputime=275.980 memavail=699148 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.277
Stats 3246.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=418961 bytes_read=986812 bytes_retransmit=0 bytes_invalid=0 send_seq=23977 receive_seq=23977 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18094 bytes_read=57620 bytes_retransmit=0 bytes_invalid=0 send_seq=2990 receive_seq=2990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999308  heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.91 cputime=276.095 memavail=698792 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.350
Stats 3247.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=419171 bytes_read=987262 bytes_retransmit=0 bytes_invalid=0 send_seq=23991 receive_seq=23991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18100 bytes_read=57636 bytes_retransmit=0 bytes_invalid=0 send_seq=2991 receive_seq=2991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999319  heater_bed: target=60 temp=60.2 pwm=0.067 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.92 cputime=276.220 memavail=698896 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.407
Stats 3248.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=419355 bytes_read=987750 bytes_retransmit=0 bytes_invalid=0 send_seq=24004 receive_seq=24004 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18106 bytes_read=57652 bytes_retransmit=0 bytes_invalid=0 send_seq=2992 receive_seq=2992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999307  heater_bed: target=60 temp=60.2 pwm=0.067 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.92 cputime=276.328 memavail=698896 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.407
Stats 3249.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=419561 bytes_read=988180 bytes_retransmit=0 bytes_invalid=0 send_seq=24017 receive_seq=24017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18112 bytes_read=57681 bytes_retransmit=0 bytes_invalid=0 send_seq=2993 receive_seq=2993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999303  heater_bed: target=60 temp=60.2 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.92 cputime=276.445 memavail=699092 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.353
Stats 3250.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=419745 bytes_read=988625 bytes_retransmit=0 bytes_invalid=0 send_seq=24030 receive_seq=24030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18118 bytes_read=57697 bytes_retransmit=0 bytes_invalid=0 send_seq=2994 receive_seq=2994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999268  heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.92 cputime=276.576 memavail=699152 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.353
Stats 3251.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=419945 bytes_read=989103 bytes_retransmit=0 bytes_invalid=0 send_seq=24044 receive_seq=24044 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18124 bytes_read=57713 bytes_retransmit=0 bytes_invalid=0 send_seq=2995 receive_seq=2995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999337  heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.92 cputime=276.691 memavail=699152 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.207
Stats 3252.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=420140 bytes_read=989533 bytes_retransmit=0 bytes_invalid=0 send_seq=24057 receive_seq=24057 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18130 bytes_read=57729 bytes_retransmit=0 bytes_invalid=0 send_seq=2996 receive_seq=2996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999332  heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=38.6 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.01 cputime=276.805 memavail=699144 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.207
Stats 3253.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=420355 bytes_read=990003 bytes_retransmit=0 bytes_invalid=0 send_seq=24072 receive_seq=24072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18136 bytes_read=57745 bytes_retransmit=0 bytes_invalid=0 send_seq=2997 receive_seq=2997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999333  heater_bed: target=60 temp=60.1 pwm=0.071 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.01 cputime=276.921 memavail=699160 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.280
Stats 3254.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=420539 bytes_read=990476 bytes_retransmit=0 bytes_invalid=0 send_seq=24085 receive_seq=24085 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18142 bytes_read=57774 bytes_retransmit=0 bytes_invalid=0 send_seq=2998 receive_seq=2998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999335  heater_bed: target=60 temp=60.2 pwm=0.071 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.01 cputime=277.034 memavail=699160 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.280
Stats 3255.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=420739 bytes_read=990911 bytes_retransmit=0 bytes_invalid=0 send_seq=24099 receive_seq=24099 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18148 bytes_read=57790 bytes_retransmit=0 bytes_invalid=0 send_seq=2999 receive_seq=2999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999360  heater_bed: target=60 temp=60.2 pwm=0.071 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.01 cputime=277.142 memavail=698932 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.338
Stats 3256.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=420939 bytes_read=991375 bytes_retransmit=0 bytes_invalid=0 send_seq=24113 receive_seq=24113 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18154 bytes_read=57806 bytes_retransmit=0 bytes_invalid=0 send_seq=3000 receive_seq=3000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999316  heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.01 cputime=277.269 memavail=698948 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.405
Stats 3257.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=421134 bytes_read=991834 bytes_retransmit=0 bytes_invalid=0 send_seq=24126 receive_seq=24126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18160 bytes_read=57822 bytes_retransmit=0 bytes_invalid=0 send_seq=3001 receive_seq=3001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999303  heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.93 cputime=277.383 memavail=698912 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.405
Stats 3258.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=421333 bytes_read=992269 bytes_retransmit=0 bytes_invalid=0 send_seq=24140 receive_seq=24140 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18166 bytes_read=57838 bytes_retransmit=0 bytes_invalid=0 send_seq=3002 receive_seq=3002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999289  heater_bed: target=60 temp=60.1 pwm=0.073 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.93 cputime=277.490 memavail=698936 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.405
Stats 3259.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=421575 bytes_read=992758 bytes_retransmit=0 bytes_invalid=0 send_seq=24156 receive_seq=24156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18172 bytes_read=57867 bytes_retransmit=0 bytes_invalid=0 send_seq=3003 receive_seq=3003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999248  heater_bed: target=60 temp=60.1 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.93 cputime=277.612 memavail=698920 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.343
Stats 3260.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=421790 bytes_read=993227 bytes_retransmit=0 bytes_invalid=0 send_seq=24171 receive_seq=24171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18178 bytes_read=57883 bytes_retransmit=0 bytes_invalid=0 send_seq=3004 receive_seq=3004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999263  heater_bed: target=60 temp=60.0 pwm=0.084 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.8 sysload=0.93 cputime=277.736 memavail=698920 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.290
Stats 3261.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=421985 bytes_read=993657 bytes_retransmit=0 bytes_invalid=0 send_seq=24184 receive_seq=24184 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18184 bytes_read=57899 bytes_retransmit=0 bytes_invalid=0 send_seq=3005 receive_seq=3005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999283  heater_bed: target=60 temp=60.0 pwm=0.084 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.93 cputime=277.859 memavail=698816 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.227
Stats 3262.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=422169 bytes_read=994131 bytes_retransmit=0 bytes_invalid=0 send_seq=24197 receive_seq=24197 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18190 bytes_read=57915 bytes_retransmit=0 bytes_invalid=0 send_seq=3006 receive_seq=3006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999311  heater_bed: target=60 temp=60.0 pwm=0.084 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.85 cputime=277.983 memavail=698924 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.227
Stats 3263.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=422377 bytes_read=994600 bytes_retransmit=0 bytes_invalid=0 send_seq=24212 receive_seq=24212 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18196 bytes_read=57931 bytes_retransmit=0 bytes_invalid=0 send_seq=3007 receive_seq=3007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999310  heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.85 cputime=278.103 memavail=698924 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.227
Stats 3264.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=422626 bytes_read=995040 bytes_retransmit=0 bytes_invalid=0 send_seq=24227 receive_seq=24227 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18202 bytes_read=57960 bytes_retransmit=0 bytes_invalid=0 send_seq=3008 receive_seq=3008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999415  heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=0.85 cputime=278.221 memavail=699100 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.281
Stats 3265.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=422888 bytes_read=995529 bytes_retransmit=0 bytes_invalid=0 send_seq=24243 receive_seq=24243 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18208 bytes_read=57976 bytes_retransmit=0 bytes_invalid=0 send_seq=3009 receive_seq=3009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999400  heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.85 cputime=278.316 memavail=699692 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.338
Stats 3266.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=423115 bytes_read=995983 bytes_retransmit=0 bytes_invalid=0 send_seq=24258 receive_seq=24258 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18214 bytes_read=57992 bytes_retransmit=0 bytes_invalid=0 send_seq=3010 receive_seq=3010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999436  heater_bed: target=60 temp=60.0 pwm=0.120 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.85 cputime=278.427 memavail=699692 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.405
Stats 3267.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=423299 bytes_read=996409 bytes_retransmit=0 bytes_invalid=0 send_seq=24271 receive_seq=24271 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18220 bytes_read=58008 bytes_retransmit=0 bytes_invalid=0 send_seq=3011 receive_seq=3011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999438  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.78 cputime=278.539 memavail=699628 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.405
Stats 3268.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=423478 bytes_read=996877 bytes_retransmit=0 bytes_invalid=0 send_seq=24283 receive_seq=24283 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18226 bytes_read=58024 bytes_retransmit=0 bytes_invalid=0 send_seq=3012 receive_seq=3012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999415  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.78 cputime=278.653 memavail=699700 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.405
Stats 3269.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=423678 bytes_read=997325 bytes_retransmit=0 bytes_invalid=0 send_seq=24297 receive_seq=24297 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18232 bytes_read=58053 bytes_retransmit=0 bytes_invalid=0 send_seq=3013 receive_seq=3013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999390  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.78 cputime=278.771 memavail=699700 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.351
Stats 3270.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=423894 bytes_read=997765 bytes_retransmit=0 bytes_invalid=0 send_seq=24312 receive_seq=24312 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18238 bytes_read=58069 bytes_retransmit=0 bytes_invalid=0 send_seq=3014 receive_seq=3014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999346  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.78 cputime=278.886 memavail=699616 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.232
Stats 3271.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=424110 bytes_read=998249 bytes_retransmit=0 bytes_invalid=0 send_seq=24327 receive_seq=24327 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18244 bytes_read=58085 bytes_retransmit=0 bytes_invalid=0 send_seq=3015 receive_seq=3015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999327  heater_bed: target=60 temp=59.8 pwm=0.204 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.78 cputime=279.002 memavail=699704 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.232
Stats 3272.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=424321 bytes_read=998698 bytes_retransmit=0 bytes_invalid=0 send_seq=24341 receive_seq=24341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18250 bytes_read=58101 bytes_retransmit=0 bytes_invalid=0 send_seq=3016 receive_seq=3016 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999285  heater_bed: target=60 temp=59.8 pwm=0.164 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.72 cputime=279.115 memavail=699704 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.232
Stats 3273.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=424516 bytes_read=999143 bytes_retransmit=0 bytes_invalid=0 send_seq=24354 receive_seq=24354 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18256 bytes_read=58117 bytes_retransmit=0 bytes_invalid=0 send_seq=3017 receive_seq=3017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999289  heater_bed: target=60 temp=59.8 pwm=0.221 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.72 cputime=279.232 memavail=699672 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.232
Stats 3274.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=424727 bytes_read=999622 bytes_retransmit=0 bytes_invalid=0 send_seq=24368 receive_seq=24368 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18262 bytes_read=58146 bytes_retransmit=0 bytes_invalid=0 send_seq=3018 receive_seq=3018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999301  heater_bed: target=60 temp=59.8 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.72 cputime=279.352 memavail=699712 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.283
Stats 3275.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=424927 bytes_read=1000071 bytes_retransmit=0 bytes_invalid=0 send_seq=24382 receive_seq=24382 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18268 bytes_read=58162 bytes_retransmit=0 bytes_invalid=0 send_seq=3019 receive_seq=3019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999306  heater_bed: target=60 temp=59.8 pwm=0.136 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=0.72 cputime=279.474 memavail=699464 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.360
Stats 3276.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=425127 bytes_read=1000521 bytes_retransmit=0 bytes_invalid=0 send_seq=24396 receive_seq=24396 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18280 bytes_read=58194 bytes_retransmit=0 bytes_invalid=0 send_seq=3021 receive_seq=3021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999325  heater_bed: target=60 temp=59.8 pwm=0.136 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.72 cputime=279.593 memavail=699328 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.411
Stats 3277.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=425311 bytes_read=1000994 bytes_retransmit=0 bytes_invalid=0 send_seq=24409 receive_seq=24409 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18286 bytes_read=58210 bytes_retransmit=0 bytes_invalid=0 send_seq=3022 receive_seq=3022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999500  heater_bed: target=60 temp=59.7 pwm=0.136 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.74 cputime=279.705 memavail=699464 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.411
Stats 3278.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=425522 bytes_read=1001429 bytes_retransmit=0 bytes_invalid=0 send_seq=24423 receive_seq=24423 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18292 bytes_read=58226 bytes_retransmit=0 bytes_invalid=0 send_seq=3023 receive_seq=3023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999473  heater_bed: target=60 temp=59.7 pwm=0.191 raspberry_pi: temp=39.2 mcu_temp: temp=37.4 chamber: temp=21.7 sysload=0.74 cputime=279.823 memavail=699464 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.360
Stats 3279.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=425722 bytes_read=1001894 bytes_retransmit=0 bytes_invalid=0 send_seq=24437 receive_seq=24437 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18298 bytes_read=58255 bytes_retransmit=0 bytes_invalid=0 send_seq=3024 receive_seq=3024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999453  heater_bed: target=60 temp=59.6 pwm=0.191 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=0.74 cputime=279.944 memavail=699084 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.298
Stats 3280.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=425933 bytes_read=1002372 bytes_retransmit=0 bytes_invalid=0 send_seq=24451 receive_seq=24451 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18304 bytes_read=58271 bytes_retransmit=0 bytes_invalid=0 send_seq=3025 receive_seq=3025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999426  heater_bed: target=60 temp=59.7 pwm=0.208 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.74 cputime=280.065 memavail=699224 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.242
Stats 3281.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=426144 bytes_read=1002807 bytes_retransmit=0 bytes_invalid=0 send_seq=24465 receive_seq=24465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001275 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18310 bytes_read=58287 bytes_retransmit=0 bytes_invalid=0 send_seq=3026 receive_seq=3026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999390  heater_bed: target=60 temp=59.7 pwm=0.133 raspberry_pi: temp=39.2 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.74 cputime=280.171 memavail=699224 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.242
Stats 3282.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=426328 bytes_read=1003252 bytes_retransmit=0 bytes_invalid=0 send_seq=24478 receive_seq=24478 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001271 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18316 bytes_read=58303 bytes_retransmit=0 bytes_invalid=0 send_seq=3027 receive_seq=3027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999374  heater_bed: target=60 temp=59.8 pwm=0.133 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.84 cputime=280.284 memavail=699120 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.242
Stats 3283.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=426512 bytes_read=1003725 bytes_retransmit=0 bytes_invalid=0 send_seq=24491 receive_seq=24491 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000018 bytes_write=18322 bytes_read=58319 bytes_retransmit=0 bytes_invalid=0 send_seq=3028 receive_seq=3028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999362  heater_bed: target=60 temp=59.8 pwm=0.133 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.84 cputime=280.400 memavail=699120 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.304
Stats 3284.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=426717 bytes_read=1004170 bytes_retransmit=0 bytes_invalid=0 send_seq=24504 receive_seq=24504 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18328 bytes_read=58348 bytes_retransmit=0 bytes_invalid=0 send_seq=3029 receive_seq=3029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999316  heater_bed: target=60 temp=59.9 pwm=0.068 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.84 cputime=280.521 memavail=699224 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.304
Stats 3285.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=426901 bytes_read=1004615 bytes_retransmit=0 bytes_invalid=0 send_seq=24517 receive_seq=24517 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18334 bytes_read=58364 bytes_retransmit=0 bytes_invalid=0 send_seq=3030 receive_seq=3030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999325  heater_bed: target=60 temp=59.9 pwm=0.068 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.84 cputime=280.616 memavail=699096 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.304
Stats 3286.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=427117 bytes_read=1005098 bytes_retransmit=0 bytes_invalid=0 send_seq=24532 receive_seq=24532 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18340 bytes_read=58380 bytes_retransmit=0 bytes_invalid=0 send_seq=3031 receive_seq=3031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999265  heater_bed: target=60 temp=59.9 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.84 cputime=280.721 memavail=699236 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.376
Stats 3287.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=427301 bytes_read=1005528 bytes_retransmit=0 bytes_invalid=0 send_seq=24545 receive_seq=24545 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18346 bytes_read=58396 bytes_retransmit=0 bytes_invalid=0 send_seq=3032 receive_seq=3032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999279  heater_bed: target=60 temp=59.9 pwm=0.141 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.10 cputime=280.831 memavail=699236 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.376
Stats 3288.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=427485 bytes_read=1006017 bytes_retransmit=0 bytes_invalid=0 send_seq=24558 receive_seq=24558 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18352 bytes_read=58412 bytes_retransmit=0 bytes_invalid=0 send_seq=3033 receive_seq=3033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999357  heater_bed: target=60 temp=59.9 pwm=0.141 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=1.10 cputime=280.963 memavail=699236 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.376
Stats 3289.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=427685 bytes_read=1006466 bytes_retransmit=0 bytes_invalid=0 send_seq=24572 receive_seq=24572 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18358 bytes_read=58441 bytes_retransmit=0 bytes_invalid=0 send_seq=3034 receive_seq=3034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999324  heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.10 cputime=281.075 memavail=699236 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.325
Stats 3290.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=427911 bytes_read=1006906 bytes_retransmit=0 bytes_invalid=0 send_seq=24587 receive_seq=24587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18364 bytes_read=58457 bytes_retransmit=0 bytes_invalid=0 send_seq=3035 receive_seq=3035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999371  heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.10 cputime=281.192 memavail=699236 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.275
Stats 3291.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=428110 bytes_read=1007375 bytes_retransmit=0 bytes_invalid=0 send_seq=24601 receive_seq=24601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18370 bytes_read=58473 bytes_retransmit=0 bytes_invalid=0 send_seq=3036 receive_seq=3036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999422  heater_bed: target=60 temp=60.1 pwm=0.070 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.10 cputime=281.301 memavail=697412 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.275
Stats 3292.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=428305 bytes_read=1007808 bytes_retransmit=0 bytes_invalid=0 send_seq=24614 receive_seq=24614 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18376 bytes_read=58489 bytes_retransmit=0 bytes_invalid=0 send_seq=3037 receive_seq=3037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999427  heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.6 sysload=1.33 cputime=281.385 memavail=698240 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.275
Stats 3293.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=428489 bytes_read=1008237 bytes_retransmit=0 bytes_invalid=0 send_seq=24627 receive_seq=24627 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18382 bytes_read=58505 bytes_retransmit=0 bytes_invalid=0 send_seq=3038 receive_seq=3038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999393  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.33 cputime=281.496 memavail=698240 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.275
Stats 3294.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=428704 bytes_read=1008736 bytes_retransmit=0 bytes_invalid=0 send_seq=24642 receive_seq=24642 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001273 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18388 bytes_read=58534 bytes_retransmit=0 bytes_invalid=0 send_seq=3039 receive_seq=3039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999382  heater_bed: target=60 temp=60.1 pwm=0.058 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.33 cputime=281.627 memavail=698228 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.293
Stats 3295.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=428904 bytes_read=1009185 bytes_retransmit=0 bytes_invalid=0 send_seq=24656 receive_seq=24656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18394 bytes_read=58550 bytes_retransmit=0 bytes_invalid=0 send_seq=3040 receive_seq=3040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999361  heater_bed: target=60 temp=60.1 pwm=0.058 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.33 cputime=281.752 memavail=698228 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.350
Stats 3296.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=429094 bytes_read=1009615 bytes_retransmit=0 bytes_invalid=0 send_seq=24670 receive_seq=24669 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18400 bytes_read=58566 bytes_retransmit=0 bytes_invalid=0 send_seq=3041 receive_seq=3041 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999312  heater_bed: target=60 temp=60.1 pwm=0.058 raspberry_pi: temp=39.2 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=1.33 cputime=281.858 memavail=698244 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.350
Stats 3297.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=429273 bytes_read=1010100 bytes_retransmit=0 bytes_invalid=0 send_seq=24682 receive_seq=24682 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18406 bytes_read=58582 bytes_retransmit=0 bytes_invalid=0 send_seq=3042 receive_seq=3042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999247  heater_bed: target=60 temp=60.2 pwm=0.058 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.38 cputime=281.971 memavail=698140 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.350
Stats 3298.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=429499 bytes_read=1010554 bytes_retransmit=0 bytes_invalid=0 send_seq=24697 receive_seq=24697 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18412 bytes_read=58598 bytes_retransmit=0 bytes_invalid=0 send_seq=3043 receive_seq=3043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999260  heater_bed: target=60 temp=60.1 pwm=0.180 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.38 cputime=282.090 memavail=698252 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.350
Stats 3299.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=429699 bytes_read=1011004 bytes_retransmit=0 bytes_invalid=0 send_seq=24711 receive_seq=24711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18418 bytes_read=58627 bytes_retransmit=0 bytes_invalid=0 send_seq=3044 receive_seq=3044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999235  heater_bed: target=60 temp=60.2 pwm=0.091 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.38 cputime=282.208 memavail=698252 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.350
Stats 3300.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=429915 bytes_read=1011488 bytes_retransmit=0 bytes_invalid=0 send_seq=24726 receive_seq=24726 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18424 bytes_read=58643 bytes_retransmit=0 bytes_invalid=0 send_seq=3045 receive_seq=3045 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999260  heater_bed: target=60 temp=60.1 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.38 cputime=282.321 memavail=697832 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.300
Stats 3301.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=430130 bytes_read=1011942 bytes_retransmit=0 bytes_invalid=0 send_seq=24741 receive_seq=24741 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18430 bytes_read=58659 bytes_retransmit=0 bytes_invalid=0 send_seq=3046 receive_seq=3046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999263  heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.38 cputime=282.443 memavail=698004 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.300
Stats 3302.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=430314 bytes_read=1012372 bytes_retransmit=0 bytes_invalid=0 send_seq=24754 receive_seq=24754 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18436 bytes_read=58675 bytes_retransmit=0 bytes_invalid=0 send_seq=3047 receive_seq=3047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999321  heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.35 cputime=282.551 memavail=698004 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.300
Stats 3303.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=430545 bytes_read=1012876 bytes_retransmit=0 bytes_invalid=0 send_seq=24770 receive_seq=24770 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18442 bytes_read=58691 bytes_retransmit=0 bytes_invalid=0 send_seq=3048 receive_seq=3048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999306  heater_bed: target=60 temp=60.1 pwm=0.103 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.35 cputime=282.665 memavail=698248 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.300
Stats 3304.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=430745 bytes_read=1013325 bytes_retransmit=0 bytes_invalid=0 send_seq=24784 receive_seq=24784 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=18448 bytes_read=58720 bytes_retransmit=0 bytes_invalid=0 send_seq=3049 receive_seq=3049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999283  heater_bed: target=60 temp=60.1 pwm=0.103 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.35 cputime=282.777 memavail=698264 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.293
Stats 3305.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=430945 bytes_read=1013760 bytes_retransmit=0 bytes_invalid=0 send_seq=24798 receive_seq=24798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=18454 bytes_read=58736 bytes_retransmit=0 bytes_invalid=0 send_seq=3050 receive_seq=3050 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999345  heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=1.35 cputime=282.878 memavail=698520 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.293
Stats 3306.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=431156 bytes_read=1014253 bytes_retransmit=0 bytes_invalid=0 send_seq=24812 receive_seq=24812 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=18460 bytes_read=58752 bytes_retransmit=0 bytes_invalid=0 send_seq=3051 receive_seq=3051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999308  heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.35 cputime=282.990 memavail=698116 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.293
Stats 3307.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=431356 bytes_read=1014688 bytes_retransmit=0 bytes_invalid=0 send_seq=24826 receive_seq=24826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=18466 bytes_read=58768 bytes_retransmit=0 bytes_invalid=0 send_seq=3052 receive_seq=3052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999332  heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=21.7 sysload=1.32 cputime=283.110 memavail=698268 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.293
Stats 3308.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=431567 bytes_read=1015153 bytes_retransmit=0 bytes_invalid=0 send_seq=24840 receive_seq=24840 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=18472 bytes_read=58784 bytes_retransmit=0 bytes_invalid=0 send_seq=3053 receive_seq=3053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999295  heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.32 cputime=283.227 memavail=698268 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3309.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=431751 bytes_read=1015626 bytes_retransmit=0 bytes_invalid=0 send_seq=24853 receive_seq=24853 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18478 bytes_read=58813 bytes_retransmit=0 bytes_invalid=0 send_seq=3054 receive_seq=3054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999291  heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.32 cputime=283.342 memavail=698216 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3310.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=431935 bytes_read=1016056 bytes_retransmit=0 bytes_invalid=0 send_seq=24866 receive_seq=24866 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18484 bytes_read=58829 bytes_retransmit=0 bytes_invalid=0 send_seq=3055 receive_seq=3055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999298  heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.32 cputime=283.452 memavail=698280 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3311.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=432119 bytes_read=1016501 bytes_retransmit=0 bytes_invalid=0 send_seq=24879 receive_seq=24879 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18490 bytes_read=58845 bytes_retransmit=0 bytes_invalid=0 send_seq=3056 receive_seq=3056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999270  heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.32 cputime=283.564 memavail=698280 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3312.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=432345 bytes_read=1016984 bytes_retransmit=0 bytes_invalid=0 send_seq=24894 receive_seq=24894 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18496 bytes_read=58861 bytes_retransmit=0 bytes_invalid=0 send_seq=3057 receive_seq=3057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999263  heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.30 cputime=283.672 memavail=698176 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.311
Stats 3313.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=432561 bytes_read=1017424 bytes_retransmit=0 bytes_invalid=0 send_seq=24909 receive_seq=24909 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000022 bytes_write=18502 bytes_read=58877 bytes_retransmit=0 bytes_invalid=0 send_seq=3058 receive_seq=3058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999239  heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=1.30 cputime=283.793 memavail=698280 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.249
Stats 3314.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=432761 bytes_read=1017889 bytes_retransmit=0 bytes_invalid=0 send_seq=24923 receive_seq=24923 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18508 bytes_read=58906 bytes_retransmit=0 bytes_invalid=0 send_seq=3059 receive_seq=3059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999257  heater_bed: target=60 temp=60.0 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.30 cputime=283.910 memavail=698280 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.249
Stats 3315.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=432972 bytes_read=1018354 bytes_retransmit=0 bytes_invalid=0 send_seq=24937 receive_seq=24937 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18514 bytes_read=58921 bytes_retransmit=0 bytes_invalid=0 send_seq=3060 receive_seq=3060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999285  heater_bed: target=60 temp=59.9 pwm=0.201 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.30 cputime=284.022 memavail=697968 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.249
Stats 3316.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=433183 bytes_read=1018780 bytes_retransmit=0 bytes_invalid=0 send_seq=24951 receive_seq=24951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18520 bytes_read=58936 bytes_retransmit=0 bytes_invalid=0 send_seq=3061 receive_seq=3061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999248  heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.30 cputime=284.142 memavail=698040 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.300
Stats 3317.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=433367 bytes_read=1019239 bytes_retransmit=0 bytes_invalid=0 send_seq=24964 receive_seq=24964 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18526 bytes_read=58951 bytes_retransmit=0 bytes_invalid=0 send_seq=3062 receive_seq=3062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999284  heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.27 cputime=284.254 memavail=698040 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.300
Stats 3318.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=433567 bytes_read=1019703 bytes_retransmit=0 bytes_invalid=0 send_seq=24978 receive_seq=24978 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18532 bytes_read=58966 bytes_retransmit=0 bytes_invalid=0 send_seq=3063 receive_seq=3063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999323  heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.27 cputime=284.360 memavail=697928 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.357
Stats 3319.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=433762 bytes_read=1020148 bytes_retransmit=0 bytes_invalid=0 send_seq=24991 receive_seq=24991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18538 bytes_read=58994 bytes_retransmit=0 bytes_invalid=0 send_seq=3064 receive_seq=3064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999233  heater_bed: target=60 temp=59.8 pwm=0.222 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.27 cputime=284.482 memavail=697928 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.357
Stats 3320.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=433978 bytes_read=1020632 bytes_retransmit=0 bytes_invalid=0 send_seq=25006 receive_seq=25006 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18544 bytes_read=59010 bytes_retransmit=0 bytes_invalid=0 send_seq=3065 receive_seq=3065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999296  heater_bed: target=60 temp=59.8 pwm=0.204 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.27 cputime=284.614 memavail=698040 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.357
Stats 3321.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=434162 bytes_read=1021076 bytes_retransmit=0 bytes_invalid=0 send_seq=25019 receive_seq=25019 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18550 bytes_read=59026 bytes_retransmit=0 bytes_invalid=0 send_seq=3066 receive_seq=3066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999368  heater_bed: target=60 temp=59.7 pwm=0.204 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.27 cputime=284.727 memavail=697936 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.357
Stats 3322.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=434352 bytes_read=1021501 bytes_retransmit=0 bytes_invalid=0 send_seq=25031 receive_seq=25031 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18556 bytes_read=59042 bytes_retransmit=0 bytes_invalid=0 send_seq=3067 receive_seq=3067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999393  heater_bed: target=60 temp=59.7 pwm=0.204 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.25 cputime=284.843 memavail=698052 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.303
Stats 3323.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=434568 bytes_read=1021980 bytes_retransmit=0 bytes_invalid=0 send_seq=25046 receive_seq=25045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18562 bytes_read=59058 bytes_retransmit=0 bytes_invalid=0 send_seq=3068 receive_seq=3068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999353  heater_bed: target=60 temp=59.7 pwm=0.186 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=1.25 cputime=284.949 memavail=698052 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.303
Stats 3324.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=434768 bytes_read=1022449 bytes_retransmit=0 bytes_invalid=0 send_seq=25060 receive_seq=25060 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18568 bytes_read=59087 bytes_retransmit=0 bytes_invalid=0 send_seq=3069 receive_seq=3069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999321  heater_bed: target=60 temp=59.8 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.25 cputime=285.065 memavail=698024 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.303
Stats 3325.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=434952 bytes_read=1022879 bytes_retransmit=0 bytes_invalid=0 send_seq=25073 receive_seq=25073 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18574 bytes_read=59103 bytes_retransmit=0 bytes_invalid=0 send_seq=3070 receive_seq=3070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999339  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.25 cputime=285.160 memavail=698064 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.303
Stats 3326.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=435147 bytes_read=1023353 bytes_retransmit=0 bytes_invalid=0 send_seq=25086 receive_seq=25086 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18580 bytes_read=59119 bytes_retransmit=0 bytes_invalid=0 send_seq=3071 receive_seq=3071 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999345  heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.25 cputime=285.271 memavail=698064 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.282
Stats 3327.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=435331 bytes_read=1023797 bytes_retransmit=0 bytes_invalid=0 send_seq=25099 receive_seq=25099 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18586 bytes_read=59135 bytes_retransmit=0 bytes_invalid=0 send_seq=3072 receive_seq=3072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999346  heater_bed: target=60 temp=60.0 pwm=0.120 raspberry_pi: temp=38.6 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.23 cputime=285.379 memavail=697960 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.282
Stats 3328.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=435546 bytes_read=1024237 bytes_retransmit=0 bytes_invalid=0 send_seq=25114 receive_seq=25114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18592 bytes_read=59151 bytes_retransmit=0 bytes_invalid=0 send_seq=3073 receive_seq=3073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999337  heater_bed: target=60 temp=60.0 pwm=0.063 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.23 cputime=285.485 memavail=698064 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.336
Stats 3329.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=435746 bytes_read=1024731 bytes_retransmit=0 bytes_invalid=0 send_seq=25128 receive_seq=25128 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18598 bytes_read=59180 bytes_retransmit=0 bytes_invalid=0 send_seq=3074 receive_seq=3074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999325  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=1.23 cputime=285.559 memavail=698064 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.336
Stats 3330.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=435930 bytes_read=1025175 bytes_retransmit=0 bytes_invalid=0 send_seq=25141 receive_seq=25141 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18610 bytes_read=59212 bytes_retransmit=0 bytes_invalid=0 send_seq=3076 receive_seq=3076 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999284  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=1.23 cputime=285.674 memavail=698260 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.336
Stats 3331.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=436130 bytes_read=1025610 bytes_retransmit=0 bytes_invalid=0 send_seq=25155 receive_seq=25155 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18616 bytes_read=59228 bytes_retransmit=0 bytes_invalid=0 send_seq=3077 receive_seq=3077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999363  heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.23 cputime=285.782 memavail=698328 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.336
Stats 3332.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=436314 bytes_read=1026084 bytes_retransmit=0 bytes_invalid=0 send_seq=25168 receive_seq=25168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18622 bytes_read=59244 bytes_retransmit=0 bytes_invalid=0 send_seq=3078 receive_seq=3078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999370  heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.21 cputime=285.895 memavail=698328 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.336
Stats 3333.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=436509 bytes_read=1026528 bytes_retransmit=0 bytes_invalid=0 send_seq=25181 receive_seq=25181 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18628 bytes_read=59260 bytes_retransmit=0 bytes_invalid=0 send_seq=3079 receive_seq=3079 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999382  heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.21 cputime=286.006 memavail=698224 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.335
Stats 3334.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=436720 bytes_read=1026978 bytes_retransmit=0 bytes_invalid=0 send_seq=25195 receive_seq=25195 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18634 bytes_read=59289 bytes_retransmit=0 bytes_invalid=0 send_seq=3080 receive_seq=3080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999420  heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.21 cputime=286.124 memavail=698328 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.279
Stats 3335.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=436931 bytes_read=1027457 bytes_retransmit=0 bytes_invalid=0 send_seq=25209 receive_seq=25209 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18640 bytes_read=59305 bytes_retransmit=0 bytes_invalid=0 send_seq=3081 receive_seq=3081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999426  heater_bed: target=60 temp=60.0 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.21 cputime=286.212 memavail=698588 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.279
Stats 3336.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=437126 bytes_read=1027901 bytes_retransmit=0 bytes_invalid=0 send_seq=25222 receive_seq=25222 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18646 bytes_read=59321 bytes_retransmit=0 bytes_invalid=0 send_seq=3082 receive_seq=3082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999307  heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=1.21 cputime=286.327 memavail=698484 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.279
Stats 3337.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=437326 bytes_read=1028336 bytes_retransmit=0 bytes_invalid=0 send_seq=25236 receive_seq=25236 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18652 bytes_read=59337 bytes_retransmit=0 bytes_invalid=0 send_seq=3083 receive_seq=3083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999275  heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.20 cputime=286.441 memavail=698592 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.334
Stats 3338.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=437526 bytes_read=1028814 bytes_retransmit=0 bytes_invalid=0 send_seq=25250 receive_seq=25250 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=18658 bytes_read=59353 bytes_retransmit=0 bytes_invalid=0 send_seq=3084 receive_seq=3084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999254  heater_bed: target=60 temp=60.0 pwm=0.089 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.20 cputime=286.558 memavail=698592 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.334
Stats 3339.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=437732 bytes_read=1029260 bytes_retransmit=0 bytes_invalid=0 send_seq=25263 receive_seq=25263 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18664 bytes_read=59382 bytes_retransmit=0 bytes_invalid=0 send_seq=3085 receive_seq=3085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999254  heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.20 cputime=286.679 memavail=698568 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.334
Stats 3340.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=437916 bytes_read=1029699 bytes_retransmit=0 bytes_invalid=0 send_seq=25276 receive_seq=25276 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18670 bytes_read=59398 bytes_retransmit=0 bytes_invalid=0 send_seq=3086 receive_seq=3086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999261  heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.20 cputime=286.795 memavail=698568 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.334
Stats 3341.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=438100 bytes_read=1030172 bytes_retransmit=0 bytes_invalid=0 send_seq=25289 receive_seq=25289 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18676 bytes_read=59414 bytes_retransmit=0 bytes_invalid=0 send_seq=3087 receive_seq=3087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999296  heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=1.20 cputime=286.919 memavail=698600 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.344
Stats 3342.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=438295 bytes_read=1030602 bytes_retransmit=0 bytes_invalid=0 send_seq=25302 receive_seq=25302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18682 bytes_read=59430 bytes_retransmit=0 bytes_invalid=0 send_seq=3088 receive_seq=3088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999281  heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.18 cputime=287.016 memavail=698496 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.344
Stats 3343.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=438522 bytes_read=1031072 bytes_retransmit=0 bytes_invalid=0 send_seq=25317 receive_seq=25317 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18688 bytes_read=59446 bytes_retransmit=0 bytes_invalid=0 send_seq=3089 receive_seq=3089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999296  heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.18 cputime=287.123 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.344
Stats 3344.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=438717 bytes_read=1031545 bytes_retransmit=0 bytes_invalid=0 send_seq=25330 receive_seq=25330 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18694 bytes_read=59475 bytes_retransmit=0 bytes_invalid=0 send_seq=3090 receive_seq=3090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999340  heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=1.18 cputime=287.233 memavail=698604 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.288
Stats 3345.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=438901 bytes_read=1031975 bytes_retransmit=0 bytes_invalid=0 send_seq=25343 receive_seq=25343 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18700 bytes_read=59491 bytes_retransmit=0 bytes_invalid=0 send_seq=3091 receive_seq=3091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999379  heater_bed: target=60 temp=59.9 pwm=0.183 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=1.18 cputime=287.319 memavail=698780 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.288
Stats 3346.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=439085 bytes_read=1032420 bytes_retransmit=0 bytes_invalid=0 send_seq=25356 receive_seq=25356 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18706 bytes_read=59507 bytes_retransmit=0 bytes_invalid=0 send_seq=3092 receive_seq=3092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999347  heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.18 cputime=287.429 memavail=698868 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.288
Stats 3347.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=439307 bytes_read=1032898 bytes_retransmit=0 bytes_invalid=0 send_seq=25370 receive_seq=25370 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18712 bytes_read=59523 bytes_retransmit=0 bytes_invalid=0 send_seq=3093 receive_seq=3093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999363  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.16 cputime=287.549 memavail=698868 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.288
Stats 3348.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=439497 bytes_read=1033323 bytes_retransmit=0 bytes_invalid=0 send_seq=25382 receive_seq=25382 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18718 bytes_read=59539 bytes_retransmit=0 bytes_invalid=0 send_seq=3094 receive_seq=3094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999351  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.16 cputime=287.662 memavail=698764 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.291
Stats 3349.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=439697 bytes_read=1033817 bytes_retransmit=0 bytes_invalid=0 send_seq=25396 receive_seq=25396 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18724 bytes_read=59568 bytes_retransmit=0 bytes_invalid=0 send_seq=3095 receive_seq=3095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999352  heater_bed: target=60 temp=60.0 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.16 cputime=287.785 memavail=698868 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.349
Stats 3350.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=439903 bytes_read=1034282 bytes_retransmit=0 bytes_invalid=0 send_seq=25411 receive_seq=25411 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18730 bytes_read=59584 bytes_retransmit=0 bytes_invalid=0 send_seq=3096 receive_seq=3096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999391  heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.16 cputime=287.897 memavail=698868 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.349
Stats 3351.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=440114 bytes_read=1034717 bytes_retransmit=0 bytes_invalid=0 send_seq=25425 receive_seq=25425 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18736 bytes_read=59600 bytes_retransmit=0 bytes_invalid=0 send_seq=3097 receive_seq=3097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999323  heater_bed: target=60 temp=59.9 pwm=0.206 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.16 cputime=288.003 memavail=698784 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.349
Stats 3352.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=440314 bytes_read=1035196 bytes_retransmit=0 bytes_invalid=0 send_seq=25439 receive_seq=25439 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18742 bytes_read=59616 bytes_retransmit=0 bytes_invalid=0 send_seq=3098 receive_seq=3098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999336  heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=1.07 cputime=288.113 memavail=698800 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.349
Stats 3353.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=440514 bytes_read=1035660 bytes_retransmit=0 bytes_invalid=0 send_seq=25453 receive_seq=25453 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18748 bytes_read=59632 bytes_retransmit=0 bytes_invalid=0 send_seq=3099 receive_seq=3099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999326  heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.07 cputime=288.224 memavail=698880 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.308
Stats 3354.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=440698 bytes_read=1036090 bytes_retransmit=0 bytes_invalid=0 send_seq=25466 receive_seq=25466 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18754 bytes_read=59661 bytes_retransmit=0 bytes_invalid=0 send_seq=3100 receive_seq=3100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999327  heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.7 sysload=1.07 cputime=288.326 memavail=698744 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.308
Stats 3355.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=440898 bytes_read=1036569 bytes_retransmit=0 bytes_invalid=0 send_seq=25480 receive_seq=25480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18760 bytes_read=59677 bytes_retransmit=0 bytes_invalid=0 send_seq=3101 receive_seq=3101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999345  heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=1.07 cputime=288.438 memavail=698892 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.245
Stats 3356.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=441108 bytes_read=1037018 bytes_retransmit=0 bytes_invalid=0 send_seq=25494 receive_seq=25494 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18766 bytes_read=59693 bytes_retransmit=0 bytes_invalid=0 send_seq=3102 receive_seq=3102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999341  heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=1.07 cputime=288.554 memavail=698892 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.245
Stats 3357.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=441307 bytes_read=1037453 bytes_retransmit=0 bytes_invalid=0 send_seq=25508 receive_seq=25508 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18772 bytes_read=59709 bytes_retransmit=0 bytes_invalid=0 send_seq=3103 receive_seq=3103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999332  heater_bed: target=60 temp=60.1 pwm=0.055 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.99 cputime=288.673 memavail=698876 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.245
Stats 3358.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=441523 bytes_read=1037937 bytes_retransmit=0 bytes_invalid=0 send_seq=25523 receive_seq=25523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18778 bytes_read=59725 bytes_retransmit=0 bytes_invalid=0 send_seq=3104 receive_seq=3104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999346  heater_bed: target=60 temp=60.0 pwm=0.115 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.99 cputime=288.802 memavail=698892 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.321
Stats 3359.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=441749 bytes_read=1038406 bytes_retransmit=0 bytes_invalid=0 send_seq=25538 receive_seq=25538 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18784 bytes_read=59754 bytes_retransmit=0 bytes_invalid=0 send_seq=3105 receive_seq=3105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999401  heater_bed: target=60 temp=60.1 pwm=0.116 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.99 cputime=288.922 memavail=698892 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.374
Stats 3360.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=441933 bytes_read=1038836 bytes_retransmit=0 bytes_invalid=0 send_seq=25551 receive_seq=25551 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18790 bytes_read=59770 bytes_retransmit=0 bytes_invalid=0 send_seq=3106 receive_seq=3106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999431  heater_bed: target=60 temp=60.0 pwm=0.116 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.99 cputime=289.037 memavail=698508 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.374
Stats 3361.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=442144 bytes_read=1039315 bytes_retransmit=0 bytes_invalid=0 send_seq=25565 receive_seq=25565 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18796 bytes_read=59786 bytes_retransmit=0 bytes_invalid=0 send_seq=3107 receive_seq=3107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999381  heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.99 cputime=289.153 memavail=698644 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.428
Stats 3362.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=442355 bytes_read=1039760 bytes_retransmit=0 bytes_invalid=0 send_seq=25579 receive_seq=25579 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18802 bytes_read=59802 bytes_retransmit=0 bytes_invalid=0 send_seq=3108 receive_seq=3108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999353  heater_bed: target=60 temp=60.0 pwm=0.126 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.91 cputime=289.267 memavail=698644 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.371
Stats 3363.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=442545 bytes_read=1040187 bytes_retransmit=0 bytes_invalid=0 send_seq=25591 receive_seq=25591 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18808 bytes_read=59818 bytes_retransmit=0 bytes_invalid=0 send_seq=3109 receive_seq=3109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999350  heater_bed: target=60 temp=60.0 pwm=0.126 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.91 cputime=289.380 memavail=698728 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.313
Stats 3364.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=442759 bytes_read=1040657 bytes_retransmit=0 bytes_invalid=0 send_seq=25605 receive_seq=25604 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18814 bytes_read=59847 bytes_retransmit=0 bytes_invalid=0 send_seq=3110 receive_seq=3110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999315  heater_bed: target=60 temp=59.9 pwm=0.186 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.7 sysload=0.91 cputime=289.509 memavail=698904 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.247
Stats 3365.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=442954 bytes_read=1041106 bytes_retransmit=0 bytes_invalid=0 send_seq=25618 receive_seq=25618 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18820 bytes_read=59863 bytes_retransmit=0 bytes_invalid=0 send_seq=3111 receive_seq=3111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999281  heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.91 cputime=289.617 memavail=699412 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.247
Stats 3366.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=443125 bytes_read=1041526 bytes_retransmit=0 bytes_invalid=0 send_seq=25629 receive_seq=25629 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18826 bytes_read=59879 bytes_retransmit=0 bytes_invalid=0 send_seq=3112 receive_seq=3112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999288  heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.91 cputime=289.729 memavail=698844 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.247
Stats 3367.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=443304 bytes_read=1041995 bytes_retransmit=0 bytes_invalid=0 send_seq=25641 receive_seq=25641 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18832 bytes_read=59895 bytes_retransmit=0 bytes_invalid=0 send_seq=3113 receive_seq=3113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999274  heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.83 cputime=289.846 memavail=698908 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.247
Stats 3368.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=443514 bytes_read=1042444 bytes_retransmit=0 bytes_invalid=0 send_seq=25655 receive_seq=25655 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=18838 bytes_read=59911 bytes_retransmit=0 bytes_invalid=0 send_seq=3114 receive_seq=3114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999299  heater_bed: target=60 temp=60.0 pwm=0.065 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.83 cputime=289.958 memavail=698908 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.321
Stats 3369.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=443709 bytes_read=1042889 bytes_retransmit=0 bytes_invalid=0 send_seq=25668 receive_seq=25668 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18844 bytes_read=59940 bytes_retransmit=0 bytes_invalid=0 send_seq=3115 receive_seq=3115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999336  heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.83 cputime=290.073 memavail=698536 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.321
Stats 3370.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=443904 bytes_read=1043377 bytes_retransmit=0 bytes_invalid=0 send_seq=25681 receive_seq=25681 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18850 bytes_read=59956 bytes_retransmit=0 bytes_invalid=0 send_seq=3116 receive_seq=3116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999364  heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.83 cputime=290.189 memavail=698664 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.378
Stats 3371.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=444083 bytes_read=1043802 bytes_retransmit=0 bytes_invalid=0 send_seq=25693 receive_seq=25693 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18856 bytes_read=59972 bytes_retransmit=0 bytes_invalid=0 send_seq=3117 receive_seq=3117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999348  heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.77 cputime=290.297 memavail=698664 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.378
Stats 3372.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=444277 bytes_read=1044247 bytes_retransmit=0 bytes_invalid=0 send_seq=25706 receive_seq=25706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18862 bytes_read=59988 bytes_retransmit=0 bytes_invalid=0 send_seq=3118 receive_seq=3118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999351  heater_bed: target=60 temp=60.1 pwm=0.076 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.77 cputime=290.419 memavail=698448 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.378
Stats 3373.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=444472 bytes_read=1044720 bytes_retransmit=0 bytes_invalid=0 send_seq=25719 receive_seq=25719 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18868 bytes_read=60004 bytes_retransmit=0 bytes_invalid=0 send_seq=3119 receive_seq=3119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999363  heater_bed: target=60 temp=60.1 pwm=0.076 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.77 cputime=290.530 memavail=698668 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.326
Stats 3374.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=444667 bytes_read=1045165 bytes_retransmit=0 bytes_invalid=0 send_seq=25732 receive_seq=25732 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=18874 bytes_read=60020 bytes_retransmit=0 bytes_invalid=0 send_seq=3120 receive_seq=3120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999355  heater_bed: target=60 temp=60.1 pwm=0.076 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.77 cputime=290.642 memavail=698668 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.276
Stats 3375.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=444878 bytes_read=1045615 bytes_retransmit=0 bytes_invalid=0 send_seq=25746 receive_seq=25746 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18880 bytes_read=60049 bytes_retransmit=0 bytes_invalid=0 send_seq=3121 receive_seq=3121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999364  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.77 cputime=290.759 memavail=699184 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.219
Stats 3376.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=445057 bytes_read=1046083 bytes_retransmit=0 bytes_invalid=0 send_seq=25758 receive_seq=25758 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18886 bytes_read=60065 bytes_retransmit=0 bytes_invalid=0 send_seq=3122 receive_seq=3122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999353  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.70 cputime=290.869 memavail=699184 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.219
Stats 3377.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=445252 bytes_read=1046513 bytes_retransmit=0 bytes_invalid=0 send_seq=25771 receive_seq=25771 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18892 bytes_read=60081 bytes_retransmit=0 bytes_invalid=0 send_seq=3123 receive_seq=3123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999354  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.70 cputime=290.984 memavail=699184 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.272
Stats 3378.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=445447 bytes_read=1046958 bytes_retransmit=0 bytes_invalid=0 send_seq=25784 receive_seq=25784 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18898 bytes_read=60097 bytes_retransmit=0 bytes_invalid=0 send_seq=3124 receive_seq=3124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999345  heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.70 cputime=291.098 memavail=699080 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.332
Stats 3379.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=445637 bytes_read=1047441 bytes_retransmit=0 bytes_invalid=0 send_seq=25796 receive_seq=25796 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18904 bytes_read=60113 bytes_retransmit=0 bytes_invalid=0 send_seq=3125 receive_seq=3125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999325  heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.70 cputime=291.214 memavail=699192 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.385
Stats 3380.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=445835 bytes_read=1047866 bytes_retransmit=0 bytes_invalid=0 send_seq=25809 receive_seq=25808 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18910 bytes_read=60142 bytes_retransmit=0 bytes_invalid=0 send_seq=3126 receive_seq=3126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999322  heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.70 cputime=291.342 memavail=699192 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.385
Stats 3381.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=446014 bytes_read=1048335 bytes_retransmit=0 bytes_invalid=0 send_seq=25821 receive_seq=25820 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18916 bytes_read=60158 bytes_retransmit=0 bytes_invalid=0 send_seq=3127 receive_seq=3127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999334  heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.65 cputime=291.455 memavail=699088 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.385
Stats 3382.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=446198 bytes_read=1048784 bytes_retransmit=0 bytes_invalid=0 send_seq=25834 receive_seq=25834 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18922 bytes_read=60174 bytes_retransmit=0 bytes_invalid=0 send_seq=3128 receive_seq=3128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999308  heater_bed: target=60 temp=59.9 pwm=0.149 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.65 cputime=291.565 memavail=699196 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.385
Stats 3383.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=446401 bytes_read=1049214 bytes_retransmit=0 bytes_invalid=0 send_seq=25847 receive_seq=25847 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18928 bytes_read=60190 bytes_retransmit=0 bytes_invalid=0 send_seq=3129 receive_seq=3129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999339  heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.65 cputime=291.667 memavail=699196 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.312
Stats 3384.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=446596 bytes_read=1049703 bytes_retransmit=0 bytes_invalid=0 send_seq=25860 receive_seq=25860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=18940 bytes_read=60222 bytes_retransmit=0 bytes_invalid=0 send_seq=3131 receive_seq=3131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999349  heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.65 cputime=291.789 memavail=699132 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.250
Stats 3385.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=446775 bytes_read=1050142 bytes_retransmit=0 bytes_invalid=0 send_seq=25872 receive_seq=25872 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18946 bytes_read=60251 bytes_retransmit=0 bytes_invalid=0 send_seq=3132 receive_seq=3132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999392  heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=38.6 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.65 cputime=291.897 memavail=698688 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.250
Stats 3386.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=446970 bytes_read=1050567 bytes_retransmit=0 bytes_invalid=0 send_seq=25885 receive_seq=25885 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18952 bytes_read=60267 bytes_retransmit=0 bytes_invalid=0 send_seq=3133 receive_seq=3133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999405  heater_bed: target=60 temp=59.8 pwm=0.253 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.60 cputime=292.009 memavail=698704 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.250
Stats 3387.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=447173 bytes_read=1051025 bytes_retransmit=0 bytes_invalid=0 send_seq=25899 receive_seq=25898 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18958 bytes_read=60283 bytes_retransmit=0 bytes_invalid=0 send_seq=3134 receive_seq=3134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999402  heater_bed: target=60 temp=59.8 pwm=0.196 raspberry_pi: temp=39.2 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.60 cputime=292.141 memavail=698488 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.250
Stats 3388.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=447373 bytes_read=1051494 bytes_retransmit=0 bytes_invalid=0 send_seq=25913 receive_seq=25913 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18964 bytes_read=60299 bytes_retransmit=0 bytes_invalid=0 send_seq=3135 receive_seq=3135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999376  heater_bed: target=60 temp=59.8 pwm=0.196 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.60 cputime=292.265 memavail=698704 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.320
Stats 3389.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=447568 bytes_read=1051919 bytes_retransmit=0 bytes_invalid=0 send_seq=25926 receive_seq=25925 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=18970 bytes_read=60315 bytes_retransmit=0 bytes_invalid=0 send_seq=3136 receive_seq=3136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999346  heater_bed: target=60 temp=59.8 pwm=0.196 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.60 cputime=292.377 memavail=698704 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.384
Stats 3390.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=447760 bytes_read=1052398 bytes_retransmit=0 bytes_invalid=0 send_seq=25939 receive_seq=25939 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18976 bytes_read=60344 bytes_retransmit=0 bytes_invalid=0 send_seq=3137 receive_seq=3137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999371  heater_bed: target=60 temp=59.8 pwm=0.130 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.9 sysload=0.60 cputime=292.488 memavail=698740 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.384
Stats 3391.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=447939 bytes_read=1052837 bytes_retransmit=0 bytes_invalid=0 send_seq=25951 receive_seq=25951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18982 bytes_read=60360 bytes_retransmit=0 bytes_invalid=0 send_seq=3138 receive_seq=3138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999376  heater_bed: target=60 temp=59.8 pwm=0.130 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.8 sysload=0.55 cputime=292.601 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.384
Stats 3392.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=448150 bytes_read=1053272 bytes_retransmit=0 bytes_invalid=0 send_seq=25965 receive_seq=25965 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18988 bytes_read=60376 bytes_retransmit=0 bytes_invalid=0 send_seq=3139 receive_seq=3139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999326  heater_bed: target=60 temp=59.8 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.55 cputime=292.716 memavail=698716 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.332
Stats 3393.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=448361 bytes_read=1053766 bytes_retransmit=0 bytes_invalid=0 send_seq=25979 receive_seq=25979 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=18994 bytes_read=60392 bytes_retransmit=0 bytes_invalid=0 send_seq=3140 receive_seq=3140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999347  heater_bed: target=60 temp=59.8 pwm=0.184 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.55 cputime=292.830 memavail=698296 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.332
Stats 3394.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=448580 bytes_read=1054215 bytes_retransmit=0 bytes_invalid=0 send_seq=25994 receive_seq=25993 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19000 bytes_read=60408 bytes_retransmit=0 bytes_invalid=0 send_seq=3141 receive_seq=3141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999325  heater_bed: target=60 temp=59.8 pwm=0.122 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.55 cputime=292.954 memavail=698464 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.253
Stats 3395.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=448759 bytes_read=1054645 bytes_retransmit=0 bytes_invalid=0 send_seq=26006 receive_seq=26006 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19006 bytes_read=60437 bytes_retransmit=0 bytes_invalid=0 send_seq=3142 receive_seq=3142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999297  heater_bed: target=60 temp=59.8 pwm=0.122 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.55 cputime=293.062 memavail=698728 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.253
Stats 3396.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=448954 bytes_read=1055114 bytes_retransmit=0 bytes_invalid=0 send_seq=26019 receive_seq=26018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19012 bytes_read=60453 bytes_retransmit=0 bytes_invalid=0 send_seq=3143 receive_seq=3143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999351  heater_bed: target=60 temp=59.8 pwm=0.181 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.58 cputime=293.180 memavail=698512 print_time=2878.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.253
Starting SD card print (position 0)
Homing X
Homing Y
Homing Z
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3397.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=449760 bytes_read=1055674 bytes_retransmit=0 bytes_invalid=0 send_seq=26047 receive_seq=26047 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19018 bytes_read=60469 bytes_retransmit=0 bytes_invalid=0 send_seq=3144 receive_seq=3144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999374 sd_pos=72355 heater_bed: target=0 temp=59.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.58 cputime=293.609 memavail=696920 print_time=3399.337 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.2 pwm=0.000
Stats 3398.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=450446 bytes_read=1056414 bytes_retransmit=0 bytes_invalid=0 send_seq=26088 receive_seq=26088 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19024 bytes_read=60485 bytes_retransmit=0 bytes_invalid=0 send_seq=3145 receive_seq=3145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999320 sd_pos=72355 heater_bed: target=0 temp=59.8 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.58 cputime=293.712 memavail=697916 print_time=3400.337 buffer_time=0.000 print_stall=0 extruder: target=0 temp=220.1 pwm=0.000
Stats 3399.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=451522 bytes_read=1057260 bytes_retransmit=0 bytes_invalid=0 send_seq=26138 receive_seq=26138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19030 bytes_read=60501 bytes_retransmit=0 bytes_invalid=0 send_seq=3146 receive_seq=3146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999305 sd_pos=72355 heater_bed: target=0 temp=59.8 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.58 cputime=293.861 memavail=697344 print_time=3401.339 buffer_time=0.000 print_stall=0 extruder: target=0 temp=219.2 pwm=0.000
Stats 3400.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=452766 bytes_read=1058087 bytes_retransmit=0 bytes_invalid=0 send_seq=26190 receive_seq=26190 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19036 bytes_read=60529 bytes_retransmit=0 bytes_invalid=0 send_seq=3147 receive_seq=3147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999327 sd_pos=72355 heater_bed: target=0 temp=59.7 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=21.8 sysload=0.58 cputime=294.008 memavail=697456 print_time=3402.305 buffer_time=0.000 print_stall=0 extruder: target=0 temp=218.2 pwm=0.000
Stats 3402.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=453495 bytes_read=1058817 bytes_retransmit=0 bytes_invalid=0 send_seq=26232 receive_seq=26232 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19042 bytes_read=60544 bytes_retransmit=0 bytes_invalid=0 send_seq=3148 receive_seq=3148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999270 sd_pos=72355 heater_bed: target=0 temp=59.6 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.62 cputime=294.167 memavail=697456 print_time=3403.305 buffer_time=0.000 print_stall=0 extruder: target=0 temp=217.2 pwm=0.000
Stats 3403.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=454523 bytes_read=1059676 bytes_retransmit=0 bytes_invalid=0 send_seq=26282 receive_seq=26282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19048 bytes_read=60559 bytes_retransmit=0 bytes_invalid=0 send_seq=3149 receive_seq=3149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999299 sd_pos=72355 heater_bed: target=0 temp=59.6 pwm=0.000 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.62 cputime=294.337 memavail=697076 print_time=3404.328 buffer_time=0.000 print_stall=0 extruder: target=0 temp=215.6 pwm=0.000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3404.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=455491 bytes_read=1060376 bytes_retransmit=0 bytes_invalid=0 send_seq=26321 receive_seq=26320 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=2 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19054 bytes_read=60574 bytes_retransmit=0 bytes_invalid=0 send_seq=3150 receive_seq=3150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999253 sd_pos=72355 heater_bed: target=0 temp=59.5 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.62 cputime=294.504 memavail=697212 print_time=3405.190 buffer_time=0.042 print_stall=0 extruder: target=0 temp=214.3 pwm=0.000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3405.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=456984 bytes_read=1061057 bytes_retransmit=0 bytes_invalid=0 send_seq=26361 receive_seq=26361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19060 bytes_read=60589 bytes_retransmit=0 bytes_invalid=0 send_seq=3151 receive_seq=3151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999343 sd_pos=72355 heater_bed: target=0 temp=59.3 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.62 cputime=294.745 memavail=697212 print_time=3406.350 buffer_time=0.000 print_stall=0 extruder: target=0 temp=213.1 pwm=0.000
Stats 3406.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=457832 bytes_read=1061811 bytes_retransmit=0 bytes_invalid=0 send_seq=26405 receive_seq=26405 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19066 bytes_read=60618 bytes_retransmit=0 bytes_invalid=0 send_seq=3152 receive_seq=3152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999234 sd_pos=72355 heater_bed: target=0 temp=59.3 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=0.62 cputime=294.898 memavail=697516 print_time=3407.350 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.4 pwm=0.000
Stats 3407.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=458670 bytes_read=1062531 bytes_retransmit=0 bytes_invalid=0 send_seq=26448 receive_seq=26448 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19072 bytes_read=60634 bytes_retransmit=0 bytes_invalid=0 send_seq=3153 receive_seq=3153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999245 sd_pos=72355 heater_bed: target=0 temp=59.2 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.65 cputime=295.049 memavail=697468 print_time=3408.350 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.1 pwm=0.000
Stats 3408.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=459556 bytes_read=1063300 bytes_retransmit=0 bytes_invalid=0 send_seq=26492 receive_seq=26492 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19078 bytes_read=60650 bytes_retransmit=0 bytes_invalid=0 send_seq=3154 receive_seq=3154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999248 sd_pos=72355 heater_bed: target=0 temp=59.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=0.65 cputime=295.204 memavail=697468 print_time=3409.350 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.0 pwm=0.000
Stats 3409.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=461525 bytes_read=1064282 bytes_retransmit=0 bytes_invalid=0 send_seq=26561 receive_seq=26561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19084 bytes_read=60666 bytes_retransmit=0 bytes_invalid=0 send_seq=3155 receive_seq=3155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999239 sd_pos=72355 heater_bed: target=0 temp=59.0 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.65 cputime=295.386 memavail=697468 print_time=3410.925 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.3 pwm=0.000
Stats 3410.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=462259 bytes_read=1064834 bytes_retransmit=0 bytes_invalid=0 send_seq=26587 receive_seq=26587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19090 bytes_read=60682 bytes_retransmit=0 bytes_invalid=0 send_seq=3156 receive_seq=3156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999275 sd_pos=72355 heater_bed: target=0 temp=58.8 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.65 cputime=295.510 memavail=697728 print_time=3411.325 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.1 pwm=0.000
Stats 3411.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=464603 bytes_read=1065816 bytes_retransmit=0 bytes_invalid=0 send_seq=26659 receive_seq=26659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=19096 bytes_read=60711 bytes_retransmit=0 bytes_invalid=0 send_seq=3157 receive_seq=3157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999289 sd_pos=72355 heater_bed: target=0 temp=58.6 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.65 cputime=295.787 memavail=697728 print_time=3414.326 buffer_time=2.162 print_stall=0 extruder: target=0 temp=204.9 pwm=0.000
Stats 3412.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=464798 bytes_read=1066264 bytes_retransmit=0 bytes_invalid=0 send_seq=26672 receive_seq=26672 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=19102 bytes_read=60727 bytes_retransmit=0 bytes_invalid=0 send_seq=3158 receive_seq=3158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999323 sd_pos=72355 heater_bed: target=0 temp=58.5 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.5 chamber: temp=21.8 sysload=0.76 cputime=295.861 memavail=695040 print_time=3414.326 buffer_time=1.161 print_stall=0 extruder: target=0 temp=203.4 pwm=0.000
Stats 3413.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=465041 bytes_read=1066699 bytes_retransmit=0 bytes_invalid=0 send_seq=26686 receive_seq=26686 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=19108 bytes_read=60743 bytes_retransmit=0 bytes_invalid=0 send_seq=3159 receive_seq=3159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999358 sd_pos=72355 heater_bed: target=0 temp=58.3 pwm=0.000 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.76 cputime=295.941 memavail=696472 print_time=3414.326 buffer_time=0.153 print_stall=0 extruder: target=0 temp=202.2 pwm=0.000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3414.0: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=466996 bytes_read=1067355 bytes_retransmit=0 bytes_invalid=0 send_seq=26731 receive_seq=26731 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=2 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=19114 bytes_read=60759 bytes_retransmit=0 bytes_invalid=0 send_seq=3160 receive_seq=3160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999341 sd_pos=72355 heater_bed: target=60 temp=58.2 pwm=0.531 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.7 sysload=0.76 cputime=296.307 memavail=696472 print_time=3416.611 buffer_time=1.437 print_stall=0 extruder: target=0 temp=201.1 pwm=0.000
Stats 3415.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=467569 bytes_read=1067854 bytes_retransmit=0 bytes_invalid=0 send_seq=26752 receive_seq=26752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=19120 bytes_read=60775 bytes_retransmit=0 bytes_invalid=0 send_seq=3161 receive_seq=3161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999371 sd_pos=72355 heater_bed: target=60 temp=58.2 pwm=0.531 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.76 cputime=296.412 memavail=696052 print_time=3416.611 buffer_time=0.433 print_stall=0 extruder: target=0 temp=199.7 pwm=0.000
Stats 3416.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=467836 bytes_read=1068307 bytes_retransmit=0 bytes_invalid=0 send_seq=26768 receive_seq=26768 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19126 bytes_read=60804 bytes_retransmit=0 bytes_invalid=0 send_seq=3162 receive_seq=3162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999350 sd_pos=72355 heater_bed: target=60 temp=58.1 pwm=0.535 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.76 cputime=296.530 memavail=696736 print_time=3417.125 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.5 pwm=0.000
Stats 3417.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=468161 bytes_read=1068796 bytes_retransmit=0 bytes_invalid=0 send_seq=26784 receive_seq=26784 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19132 bytes_read=60820 bytes_retransmit=0 bytes_invalid=0 send_seq=3163 receive_seq=3163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999356 sd_pos=72355 heater_bed: target=60 temp=58.2 pwm=0.382 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.78 cputime=296.653 memavail=696736 print_time=3418.125 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.5 pwm=0.000
Stats 3418.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=468399 bytes_read=1069245 bytes_retransmit=0 bytes_invalid=0 send_seq=26798 receive_seq=26798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19138 bytes_read=60836 bytes_retransmit=0 bytes_invalid=0 send_seq=3164 receive_seq=3164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999381 sd_pos=72355 heater_bed: target=60 temp=58.3 pwm=0.327 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.78 cputime=296.776 memavail=696520 print_time=3419.126 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.1 pwm=0.000
Stats 3419.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=468638 bytes_read=1069675 bytes_retransmit=0 bytes_invalid=0 send_seq=26811 receive_seq=26811 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19144 bytes_read=60852 bytes_retransmit=0 bytes_invalid=0 send_seq=3165 receive_seq=3165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999382 sd_pos=72355 heater_bed: target=60 temp=58.5 pwm=0.249 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.78 cputime=296.897 memavail=696488 print_time=3420.127 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.1 pwm=0.000
Stats 3420.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=468931 bytes_read=1070179 bytes_retransmit=0 bytes_invalid=0 send_seq=26827 receive_seq=26827 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19150 bytes_read=60868 bytes_retransmit=0 bytes_invalid=0 send_seq=3166 receive_seq=3166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999404 sd_pos=72355 heater_bed: target=60 temp=58.8 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.78 cputime=297.020 memavail=696496 print_time=3421.128 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.0 pwm=0.000
Stats 3421.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=469207 bytes_read=1070633 bytes_retransmit=0 bytes_invalid=0 send_seq=26842 receive_seq=26842 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=19156 bytes_read=60897 bytes_retransmit=0 bytes_invalid=0 send_seq=3167 receive_seq=3167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999395 sd_pos=72355 heater_bed: target=60 temp=58.9 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.78 cputime=297.146 memavail=696116 print_time=3422.128 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.7 pwm=0.000
Stats 3422.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=469435 bytes_read=1071063 bytes_retransmit=0 bytes_invalid=0 send_seq=26855 receive_seq=26855 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=19162 bytes_read=60913 bytes_retransmit=0 bytes_invalid=0 send_seq=3168 receive_seq=3168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999355 sd_pos=72355 heater_bed: target=60 temp=59.1 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.80 cputime=297.263 memavail=696244 print_time=3423.129 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.7 pwm=0.000
Stats 3423.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=469661 bytes_read=1071537 bytes_retransmit=0 bytes_invalid=0 send_seq=26868 receive_seq=26868 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=19168 bytes_read=60929 bytes_retransmit=0 bytes_invalid=0 send_seq=3169 receive_seq=3169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999335 sd_pos=72355 heater_bed: target=60 temp=59.3 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.80 cputime=297.381 memavail=696244 print_time=3424.130 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.7 pwm=0.000
Stats 3424.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000010 mcu_task_stddev=0.000022 bytes_write=469905 bytes_read=1071986 bytes_retransmit=0 bytes_invalid=0 send_seq=26882 receive_seq=26882 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=19174 bytes_read=60945 bytes_retransmit=0 bytes_invalid=0 send_seq=3170 receive_seq=3170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999375 sd_pos=72355 heater_bed: target=60 temp=59.4 pwm=0.174 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.80 cputime=297.493 memavail=696140 print_time=3425.131 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.4 pwm=0.000
Stats 3425.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=470133 bytes_read=1072431 bytes_retransmit=0 bytes_invalid=0 send_seq=26895 receive_seq=26895 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000020 bytes_write=19180 bytes_read=60961 bytes_retransmit=0 bytes_invalid=0 send_seq=3171 receive_seq=3171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999372 sd_pos=72355 heater_bed: target=60 temp=59.6 pwm=0.174 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.80 cputime=297.612 memavail=696248 print_time=3426.131 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.5 pwm=0.000
Stats 3426.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=470478 bytes_read=1072925 bytes_retransmit=0 bytes_invalid=0 send_seq=26912 receive_seq=26912 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=19186 bytes_read=60990 bytes_retransmit=0 bytes_invalid=0 send_seq=3172 receive_seq=3172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999384 sd_pos=72355 heater_bed: target=60 temp=59.7 pwm=0.193 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.80 cputime=297.737 memavail=696508 print_time=3427.132 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.5 pwm=0.000
Stats 3427.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=470766 bytes_read=1073374 bytes_retransmit=0 bytes_invalid=0 send_seq=26927 receive_seq=26926 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=19192 bytes_read=61006 bytes_retransmit=0 bytes_invalid=0 send_seq=3173 receive_seq=3173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999442 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.193 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.81 cputime=297.876 memavail=696708 print_time=3428.132 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.2 pwm=0.000
Stats 3428.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=470949 bytes_read=1073809 bytes_retransmit=0 bytes_invalid=0 send_seq=26940 receive_seq=26940 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=72 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=19198 bytes_read=61022 bytes_retransmit=0 bytes_invalid=0 send_seq=3174 receive_seq=3174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999414 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.81 cputime=297.995 memavail=696760 print_time=3429.133 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.2 pwm=0.000
Stats 3429.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=471234 bytes_read=1074293 bytes_retransmit=0 bytes_invalid=0 send_seq=26956 receive_seq=26955 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=19204 bytes_read=61038 bytes_retransmit=0 bytes_invalid=0 send_seq=3175 receive_seq=3175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999356 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.81 cputime=298.112 memavail=696760 print_time=3430.133 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.0 pwm=0.000
Stats 3430.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=471464 bytes_read=1074762 bytes_retransmit=0 bytes_invalid=0 send_seq=26970 receive_seq=26970 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=19210 bytes_read=61054 bytes_retransmit=0 bytes_invalid=0 send_seq=3176 receive_seq=3176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999392 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.81 cputime=298.228 memavail=696456 print_time=3431.134 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.1 pwm=0.000
Stats 3431.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=472951 bytes_read=1075307 bytes_retransmit=0 bytes_invalid=0 send_seq=27006 receive_seq=27006 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19216 bytes_read=61083 bytes_retransmit=0 bytes_invalid=0 send_seq=3177 receive_seq=3177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999410 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.172 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.81 cputime=298.432 memavail=696528 print_time=3433.933 buffer_time=1.718 print_stall=0 extruder: target=220 temp=182.1 pwm=1.000
Heater extruder approaching new target of 220.000
Stats 3432.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=473867 bytes_read=1075846 bytes_retransmit=0 bytes_invalid=0 send_seq=27032 receive_seq=27032 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19222 bytes_read=61099 bytes_retransmit=0 bytes_invalid=0 send_seq=3178 receive_seq=3178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999368 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.261 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.83 cputime=298.530 memavail=696560 print_time=3433.933 buffer_time=0.717 print_stall=0 extruder: target=220 temp=181.2 pwm=1.000
Stats 3433.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=474116 bytes_read=1076300 bytes_retransmit=0 bytes_invalid=0 send_seq=27047 receive_seq=27047 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19228 bytes_read=61115 bytes_retransmit=0 bytes_invalid=0 send_seq=3179 receive_seq=3179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999311 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.83 cputime=298.650 memavail=696436 print_time=3434.204 buffer_time=0.000 print_stall=0 extruder: target=220 temp=181.0 pwm=1.000
Stats 3434.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000016 bytes_write=474295 bytes_read=1076725 bytes_retransmit=0 bytes_invalid=0 send_seq=27059 receive_seq=27059 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19234 bytes_read=61131 bytes_retransmit=0 bytes_invalid=0 send_seq=3180 receive_seq=3180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999255 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.166 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.83 cputime=298.759 memavail=696532 print_time=3435.206 buffer_time=0.000 print_stall=0 extruder: target=220 temp=182.2 pwm=1.000
Stats 3435.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=474523 bytes_read=1077201 bytes_retransmit=0 bytes_invalid=0 send_seq=27072 receive_seq=27072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19240 bytes_read=61147 bytes_retransmit=0 bytes_invalid=0 send_seq=3181 receive_seq=3181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999260 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.166 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.83 cputime=298.877 memavail=696532 print_time=3436.206 buffer_time=0.000 print_stall=0 extruder: target=220 temp=184.3 pwm=1.000
Stats 3436.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=474820 bytes_read=1077641 bytes_retransmit=0 bytes_invalid=0 send_seq=27086 receive_seq=27086 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19246 bytes_read=61176 bytes_retransmit=0 bytes_invalid=0 send_seq=3182 receive_seq=3182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999314 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.83 cputime=299.008 memavail=696180 print_time=3437.207 buffer_time=0.000 print_stall=0 extruder: target=220 temp=187.9 pwm=1.000
Stats 3437.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=475096 bytes_read=1078076 bytes_retransmit=0 bytes_invalid=0 send_seq=27100 receive_seq=27100 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19252 bytes_read=61192 bytes_retransmit=0 bytes_invalid=0 send_seq=3183 receive_seq=3183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999294 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.84 cputime=299.124 memavail=696288 print_time=3438.208 buffer_time=0.000 print_stall=0 extruder: target=220 temp=190.9 pwm=1.000
Stats 3438.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=475387 bytes_read=1078560 bytes_retransmit=0 bytes_invalid=0 send_seq=27115 receive_seq=27115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19258 bytes_read=61208 bytes_retransmit=0 bytes_invalid=0 send_seq=3184 receive_seq=3184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.84 cputime=299.240 memavail=696288 print_time=3439.208 buffer_time=0.000 print_stall=0 extruder: target=220 temp=194.0 pwm=1.000
Stats 3439.0: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000011 mcu_task_stddev=0.000025 bytes_write=475669 bytes_read=1079014 bytes_retransmit=0 bytes_invalid=0 send_seq=27130 receive_seq=27130 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19264 bytes_read=61224 bytes_retransmit=0 bytes_invalid=0 send_seq=3185 receive_seq=3185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999409 sd_pos=72355 heater_bed: target=60 temp=60.5 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.84 cputime=299.355 memavail=696484 print_time=3440.209 buffer_time=0.000 print_stall=0 extruder: target=220 temp=198.1 pwm=1.000
Stats 3440.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=475959 bytes_read=1079479 bytes_retransmit=0 bytes_invalid=0 send_seq=27147 receive_seq=27147 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19270 bytes_read=61240 bytes_retransmit=0 bytes_invalid=0 send_seq=3186 receive_seq=3186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999402 sd_pos=72355 heater_bed: target=60 temp=60.5 pwm=0.080 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.84 cputime=299.468 memavail=696544 print_time=3441.210 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.2 pwm=1.000
Stats 3441.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=476302 bytes_read=1079968 bytes_retransmit=0 bytes_invalid=0 send_seq=27163 receive_seq=27163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19276 bytes_read=61269 bytes_retransmit=0 bytes_invalid=0 send_seq=3187 receive_seq=3187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999436 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.080 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.84 cputime=299.586 memavail=696544 print_time=3442.212 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.1 pwm=1.000
Stats 3442.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=476633 bytes_read=1080427 bytes_retransmit=0 bytes_invalid=0 send_seq=27179 receive_seq=27179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19288 bytes_read=61301 bytes_retransmit=0 bytes_invalid=0 send_seq=3189 receive_seq=3189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999466 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.080 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.85 cputime=299.712 memavail=696440 print_time=3443.212 buffer_time=0.000 print_stall=0 extruder: target=220 temp=207.8 pwm=1.000
Stats 3443.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=476935 bytes_read=1080877 bytes_retransmit=0 bytes_invalid=0 send_seq=27196 receive_seq=27196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19294 bytes_read=61317 bytes_retransmit=0 bytes_invalid=0 send_seq=3190 receive_seq=3190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999434 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.85 cputime=299.825 memavail=696552 print_time=3444.213 buffer_time=0.000 print_stall=0 extruder: target=220 temp=210.5 pwm=0.847
Stats 3444.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000018 bytes_write=477228 bytes_read=1081371 bytes_retransmit=0 bytes_invalid=0 send_seq=27213 receive_seq=27213 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19300 bytes_read=61333 bytes_retransmit=0 bytes_invalid=0 send_seq=3191 receive_seq=3191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999436 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.090 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.85 cputime=299.938 memavail=696552 print_time=3445.213 buffer_time=0.000 print_stall=0 extruder: target=220 temp=213.1 pwm=0.672
Stats 3445.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=477567 bytes_read=1081855 bytes_retransmit=0 bytes_invalid=0 send_seq=27231 receive_seq=27231 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19306 bytes_read=61349 bytes_retransmit=0 bytes_invalid=0 send_seq=3192 receive_seq=3192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999416 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.85 cputime=300.058 memavail=696440 print_time=3446.214 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.3 pwm=0.430
Heater extruder within range of 220.000
Stats 3446.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=477869 bytes_read=1082305 bytes_retransmit=0 bytes_invalid=0 send_seq=27248 receive_seq=27248 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19312 bytes_read=61378 bytes_retransmit=0 bytes_invalid=0 send_seq=3193 receive_seq=3193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999373 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.85 cputime=300.174 memavail=696804 print_time=3447.215 buffer_time=0.000 print_stall=0 extruder: target=220 temp=218.0 pwm=0.350
Stats 3447.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=478172 bytes_read=1082799 bytes_retransmit=0 bytes_invalid=0 send_seq=27265 receive_seq=27265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19318 bytes_read=61394 bytes_retransmit=0 bytes_invalid=0 send_seq=3194 receive_seq=3194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999346 sd_pos=72355 heater_bed: target=60 temp=60.5 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=0.87 cputime=300.297 memavail=696804 print_time=3448.216 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.268
Stats 3448.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=478556 bytes_read=1083263 bytes_retransmit=0 bytes_invalid=0 send_seq=27282 receive_seq=27282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19324 bytes_read=61410 bytes_retransmit=0 bytes_invalid=0 send_seq=3195 receive_seq=3195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999358 sd_pos=72355 heater_bed: target=60 temp=60.6 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.87 cputime=300.421 memavail=696984 print_time=3449.217 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.355
Stats 3449.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=478819 bytes_read=1083703 bytes_retransmit=0 bytes_invalid=0 send_seq=27297 receive_seq=27297 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19330 bytes_read=61426 bytes_retransmit=0 bytes_invalid=0 send_seq=3196 receive_seq=3196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999319 sd_pos=72355 heater_bed: target=60 temp=60.5 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.87 cputime=300.535 memavail=697072 print_time=3480.218 buffer_time=29.990 print_stall=0 extruder: target=220 temp=220.9 pwm=0.417
Stats 3450.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=479084 bytes_read=1084221 bytes_retransmit=0 bytes_invalid=0 send_seq=27313 receive_seq=27313 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19336 bytes_read=61442 bytes_retransmit=0 bytes_invalid=0 send_seq=3197 receive_seq=3197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999349 sd_pos=72355 heater_bed: target=60 temp=60.5 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.87 cputime=300.647 memavail=697072 print_time=3480.218 buffer_time=28.989 print_stall=0 extruder: target=220 temp=220.8 pwm=0.484
Stats 3451.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=479338 bytes_read=1084666 bytes_retransmit=0 bytes_invalid=0 send_seq=27329 receive_seq=27329 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19342 bytes_read=61471 bytes_retransmit=0 bytes_invalid=0 send_seq=3198 receive_seq=3198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.9 sysload=0.87 cputime=300.760 memavail=696968 print_time=3480.218 buffer_time=27.988 print_stall=0 extruder: target=220 temp=220.7 pwm=0.535
Stats 3452.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=479522 bytes_read=1085111 bytes_retransmit=0 bytes_invalid=0 send_seq=27342 receive_seq=27342 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19348 bytes_read=61487 bytes_retransmit=0 bytes_invalid=0 send_seq=3199 receive_seq=3199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999359 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.88 cputime=300.874 memavail=697072 print_time=3480.218 buffer_time=26.987 print_stall=0 extruder: target=220 temp=220.8 pwm=0.535
Stats 3453.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=479738 bytes_read=1085594 bytes_retransmit=0 bytes_invalid=0 send_seq=27357 receive_seq=27357 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19354 bytes_read=61503 bytes_retransmit=0 bytes_invalid=0 send_seq=3200 receive_seq=3200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999359 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.134 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.88 cputime=300.987 memavail=697072 print_time=3480.218 buffer_time=25.985 print_stall=0 extruder: target=220 temp=221.3 pwm=0.356
Stats 3454.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000020 bytes_write=479960 bytes_read=1086029 bytes_retransmit=0 bytes_invalid=0 send_seq=27371 receive_seq=27371 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19360 bytes_read=61519 bytes_retransmit=0 bytes_invalid=0 send_seq=3201 receive_seq=3201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999357 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.092 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.88 cputime=301.104 memavail=697276 print_time=3480.218 buffer_time=24.984 print_stall=0 extruder: target=220 temp=221.7 pwm=0.255
Stats 3455.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=480214 bytes_read=1086504 bytes_retransmit=0 bytes_invalid=0 send_seq=27387 receive_seq=27387 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19366 bytes_read=61535 bytes_retransmit=0 bytes_invalid=0 send_seq=3202 receive_seq=3202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999359 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.092 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.88 cputime=301.218 memavail=697336 print_time=3480.218 buffer_time=23.984 print_stall=0 extruder: target=220 temp=222.2 pwm=0.164
Stats 3456.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=480559 bytes_read=1086997 bytes_retransmit=0 bytes_invalid=0 send_seq=27404 receive_seq=27404 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19372 bytes_read=61564 bytes_retransmit=0 bytes_invalid=0 send_seq=3203 receive_seq=3203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999357 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.092 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.88 cputime=301.336 memavail=696784 print_time=3480.218 buffer_time=22.983 print_stall=0 extruder: target=220 temp=222.5 pwm=0.164
Stats 3457.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=480743 bytes_read=1087427 bytes_retransmit=0 bytes_invalid=0 send_seq=27417 receive_seq=27417 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19378 bytes_read=61580 bytes_retransmit=0 bytes_invalid=0 send_seq=3204 receive_seq=3204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999357 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.092 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.89 cputime=301.451 memavail=696328 print_time=3480.218 buffer_time=21.982 print_stall=0 extruder: target=220 temp=222.4 pwm=0.164
Stats 3458.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=481024 bytes_read=1087891 bytes_retransmit=0 bytes_invalid=0 send_seq=27434 receive_seq=27434 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19384 bytes_read=61596 bytes_retransmit=0 bytes_invalid=0 send_seq=3205 receive_seq=3205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999358 sd_pos=72355 heater_bed: target=60 temp=60.4 pwm=0.132 raspberry_pi: temp=39.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.89 cputime=301.562 memavail=696328 print_time=3480.218 buffer_time=20.981 print_stall=0 extruder: target=220 temp=222.0 pwm=0.281
Stats 3459.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=481219 bytes_read=1088349 bytes_retransmit=0 bytes_invalid=0 send_seq=27447 receive_seq=27447 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19390 bytes_read=61612 bytes_retransmit=0 bytes_invalid=0 send_seq=3206 receive_seq=3206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999355 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.89 cputime=301.672 memavail=696328 print_time=3480.218 buffer_time=19.980 print_stall=0 extruder: target=220 temp=221.4 pwm=0.339
Stats 3460.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=481586 bytes_read=1088809 bytes_retransmit=0 bytes_invalid=0 send_seq=27464 receive_seq=27464 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=19396 bytes_read=61628 bytes_retransmit=0 bytes_invalid=0 send_seq=3207 receive_seq=3207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.9 sysload=0.89 cputime=301.795 memavail=696580 print_time=3480.218 buffer_time=18.979 print_stall=0 extruder: target=220 temp=220.8 pwm=0.459
Stats 3461.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=481819 bytes_read=1089259 bytes_retransmit=0 bytes_invalid=0 send_seq=27478 receive_seq=27478 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19402 bytes_read=61657 bytes_retransmit=0 bytes_invalid=0 send_seq=3208 receive_seq=3208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999349 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.132 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.89 cputime=301.907 memavail=696592 print_time=3480.218 buffer_time=17.978 print_stall=0 extruder: target=220 temp=220.5 pwm=0.459
Stats 3462.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=482035 bytes_read=1089742 bytes_retransmit=0 bytes_invalid=0 send_seq=27493 receive_seq=27493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19408 bytes_read=61673 bytes_retransmit=0 bytes_invalid=0 send_seq=3209 receive_seq=3209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999348 sd_pos=72355 heater_bed: target=60 temp=60.3 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.90 cputime=302.014 memavail=696592 print_time=3480.218 buffer_time=16.977 print_stall=0 extruder: target=220 temp=220.4 pwm=0.392
Stats 3463.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=482251 bytes_read=1090182 bytes_retransmit=0 bytes_invalid=0 send_seq=27508 receive_seq=27508 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19414 bytes_read=61689 bytes_retransmit=0 bytes_invalid=0 send_seq=3210 receive_seq=3210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999344 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.147 raspberry_pi: temp=39.2 mcu_temp: temp=37.1 chamber: temp=21.8 sysload=0.90 cputime=302.118 memavail=696708 print_time=3480.218 buffer_time=15.976 print_stall=0 extruder: target=220 temp=220.7 pwm=0.277
Stats 3464.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=482451 bytes_read=1090632 bytes_retransmit=0 bytes_invalid=0 send_seq=27522 receive_seq=27522 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19420 bytes_read=61705 bytes_retransmit=0 bytes_invalid=0 send_seq=3211 receive_seq=3211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999345 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.90 cputime=302.227 memavail=696856 print_time=3480.218 buffer_time=14.975 print_stall=0 extruder: target=220 temp=221.0 pwm=0.185
Stats 3465.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=482667 bytes_read=1091130 bytes_retransmit=0 bytes_invalid=0 send_seq=27537 receive_seq=27537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19426 bytes_read=61721 bytes_retransmit=0 bytes_invalid=0 send_seq=3212 receive_seq=3212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999345 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.90 cputime=302.338 memavail=696856 print_time=3480.218 buffer_time=13.973 print_stall=0 extruder: target=220 temp=221.2 pwm=0.185
Stats 3466.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=482846 bytes_read=1091555 bytes_retransmit=0 bytes_invalid=0 send_seq=27549 receive_seq=27549 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19432 bytes_read=61750 bytes_retransmit=0 bytes_invalid=0 send_seq=3213 receive_seq=3213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999343 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.146 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.90 cputime=302.453 memavail=696152 print_time=3480.218 buffer_time=12.972 print_stall=0 extruder: target=220 temp=221.2 pwm=0.185
Stats 3467.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=483052 bytes_read=1092000 bytes_retransmit=0 bytes_invalid=0 send_seq=27562 receive_seq=27562 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19438 bytes_read=61766 bytes_retransmit=0 bytes_invalid=0 send_seq=3214 receive_seq=3214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.208 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.90 cputime=302.563 memavail=696348 print_time=3480.218 buffer_time=11.971 print_stall=0 extruder: target=220 temp=221.0 pwm=0.253
Stats 3468.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=483280 bytes_read=1092494 bytes_retransmit=0 bytes_invalid=0 send_seq=27577 receive_seq=27577 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19444 bytes_read=61782 bytes_retransmit=0 bytes_invalid=0 send_seq=3215 receive_seq=3215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.187 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.90 cputime=302.678 memavail=696348 print_time=3480.218 buffer_time=10.971 print_stall=0 extruder: target=220 temp=220.5 pwm=0.304
Stats 3469.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=483491 bytes_read=1092929 bytes_retransmit=0 bytes_invalid=0 send_seq=27591 receive_seq=27591 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19450 bytes_read=61798 bytes_retransmit=0 bytes_invalid=0 send_seq=3216 receive_seq=3216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.8 sysload=0.90 cputime=302.785 memavail=696244 print_time=3480.218 buffer_time=9.970 print_stall=0 extruder: target=220 temp=220.1 pwm=0.378
Stats 3470.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=483735 bytes_read=1093394 bytes_retransmit=0 bytes_invalid=0 send_seq=27605 receive_seq=27605 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19456 bytes_read=61814 bytes_retransmit=0 bytes_invalid=0 send_seq=3217 receive_seq=3217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=21.9 sysload=0.90 cputime=302.894 memavail=696360 print_time=3480.218 buffer_time=8.969 print_stall=0 extruder: target=220 temp=219.8 pwm=0.431
Stats 3471.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=483944 bytes_read=1093872 bytes_retransmit=0 bytes_invalid=0 send_seq=27619 receive_seq=27619 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19462 bytes_read=61843 bytes_retransmit=0 bytes_invalid=0 send_seq=3218 receive_seq=3218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.086 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.90 cputime=303.009 memavail=696360 print_time=3480.218 buffer_time=7.969 print_stall=0 extruder: target=220 temp=219.6 pwm=0.431
Stats 3472.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=484155 bytes_read=1094307 bytes_retransmit=0 bytes_invalid=0 send_seq=27633 receive_seq=27633 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19468 bytes_read=61859 bytes_retransmit=0 bytes_invalid=0 send_seq=3219 receive_seq=3219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999341 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.91 cputime=303.116 memavail=696256 print_time=3480.218 buffer_time=6.967 print_stall=0 extruder: target=220 temp=219.8 pwm=0.329
Stats 3473.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=484350 bytes_read=1094752 bytes_retransmit=0 bytes_invalid=0 send_seq=27646 receive_seq=27646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19474 bytes_read=61875 bytes_retransmit=0 bytes_invalid=0 send_seq=3220 receive_seq=3220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.91 cputime=303.230 memavail=696360 print_time=3480.218 buffer_time=5.967 print_stall=0 extruder: target=220 temp=220.2 pwm=0.267
Stats 3474.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=484588 bytes_read=1095235 bytes_retransmit=0 bytes_invalid=0 send_seq=27661 receive_seq=27661 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19480 bytes_read=61891 bytes_retransmit=0 bytes_invalid=0 send_seq=3221 receive_seq=3221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999338 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.140 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.91 cputime=303.340 memavail=696360 print_time=3480.218 buffer_time=4.966 print_stall=0 extruder: target=220 temp=220.5 pwm=0.173
Stats 3475.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=484767 bytes_read=1095675 bytes_retransmit=0 bytes_invalid=0 send_seq=27673 receive_seq=27673 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19486 bytes_read=61907 bytes_retransmit=0 bytes_invalid=0 send_seq=3222 receive_seq=3222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999337 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.91 cputime=303.456 memavail=696476 print_time=3480.218 buffer_time=3.965 print_stall=0 extruder: target=220 temp=220.7 pwm=0.173
Stats 3476.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=485011 bytes_read=1096125 bytes_retransmit=0 bytes_invalid=0 send_seq=27687 receive_seq=27687 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19492 bytes_read=61936 bytes_retransmit=0 bytes_invalid=0 send_seq=3223 receive_seq=3223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999336 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.91 cputime=303.543 memavail=696120 print_time=3480.218 buffer_time=2.964 print_stall=0 extruder: target=220 temp=220.6 pwm=0.229
Stats 3477.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=486233 bytes_read=1096673 bytes_retransmit=0 bytes_invalid=0 send_seq=27716 receive_seq=27715 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19498 bytes_read=61952 bytes_retransmit=0 bytes_invalid=0 send_seq=3224 receive_seq=3224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999332 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.140 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=303.786 memavail=696120 print_time=3484.451 buffer_time=6.114 print_stall=0 extruder: target=220 temp=220.2 pwm=0.283
Stats 3478.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=486430 bytes_read=1097118 bytes_retransmit=0 bytes_invalid=0 send_seq=27729 receive_seq=27728 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19504 bytes_read=61968 bytes_retransmit=0 bytes_invalid=0 send_seq=3225 receive_seq=3225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.094 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=303.861 memavail=696376 print_time=3484.451 buffer_time=5.113 print_stall=0 extruder: target=220 temp=219.9 pwm=0.368
Stats 3479.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=486617 bytes_read=1097606 bytes_retransmit=0 bytes_invalid=0 send_seq=27741 receive_seq=27741 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19510 bytes_read=61984 bytes_retransmit=0 bytes_invalid=0 send_seq=3226 receive_seq=3226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.094 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=303.969 memavail=696376 print_time=3484.451 buffer_time=4.112 print_stall=0 extruder: target=220 temp=219.5 pwm=0.431
Stats 3480.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=486796 bytes_read=1098031 bytes_retransmit=0 bytes_invalid=0 send_seq=27753 receive_seq=27753 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19516 bytes_read=62000 bytes_retransmit=0 bytes_invalid=0 send_seq=3227 receive_seq=3227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999334 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.094 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.0 sysload=1.00 cputime=304.079 memavail=696376 print_time=3484.451 buffer_time=3.112 print_stall=0 extruder: target=220 temp=219.4 pwm=0.431
Stats 3481.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=487043 bytes_read=1098481 bytes_retransmit=0 bytes_invalid=0 send_seq=27767 receive_seq=27767 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19522 bytes_read=62029 bytes_retransmit=0 bytes_invalid=0 send_seq=3228 receive_seq=3228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999341 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.094 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=304.193 memavail=696384 print_time=3484.451 buffer_time=2.111 print_stall=0 extruder: target=220 temp=219.4 pwm=0.431
Stats 3482.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=488048 bytes_read=1099020 bytes_retransmit=0 bytes_invalid=0 send_seq=27794 receive_seq=27794 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19528 bytes_read=62045 bytes_retransmit=0 bytes_invalid=0 send_seq=3229 receive_seq=3229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.094 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=1.00 cputime=304.333 memavail=696384 print_time=3485.674 buffer_time=2.334 print_stall=0 extruder: target=220 temp=219.9 pwm=0.294
Stats 3483.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=488814 bytes_read=1099487 bytes_retransmit=0 bytes_invalid=0 send_seq=27817 receive_seq=27817 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19534 bytes_read=62061 bytes_retransmit=0 bytes_invalid=0 send_seq=3230 receive_seq=3230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.075 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=1.00 cputime=304.461 memavail=696384 print_time=3486.771 buffer_time=2.429 print_stall=0 extruder: target=220 temp=220.2 pwm=0.226
Stats 3484.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=489483 bytes_read=1099979 bytes_retransmit=0 bytes_invalid=0 send_seq=27837 receive_seq=27837 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19540 bytes_read=62077 bytes_retransmit=0 bytes_invalid=0 send_seq=3231 receive_seq=3231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999348 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=304.596 memavail=696388 print_time=3487.867 buffer_time=2.526 print_stall=0 extruder: target=220 temp=220.5 pwm=0.169
Stats 3485.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=489959 bytes_read=1100472 bytes_retransmit=0 bytes_invalid=0 send_seq=27854 receive_seq=27854 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19546 bytes_read=62093 bytes_retransmit=0 bytes_invalid=0 send_seq=3232 receive_seq=3232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999348 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=1.00 cputime=304.728 memavail=696356 print_time=3488.416 buffer_time=2.073 print_stall=0 extruder: target=220 temp=220.6 pwm=0.169
Z Tilt Adjust
Stats 3486.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=491925 bytes_read=1101052 bytes_retransmit=0 bytes_invalid=0 send_seq=27897 receive_seq=27897 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19552 bytes_read=62122 bytes_retransmit=0 bytes_invalid=0 send_seq=3233 receive_seq=3233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999353 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=304.931 memavail=696900 print_time=3491.422 buffer_time=4.080 print_stall=0 extruder: target=220 temp=220.3 pwm=0.323
Stats 3487.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=492428 bytes_read=1101527 bytes_retransmit=0 bytes_invalid=0 send_seq=27916 receive_seq=27916 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19558 bytes_read=62137 bytes_retransmit=0 bytes_invalid=0 send_seq=3234 receive_seq=3234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999350 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=305.016 memavail=696648 print_time=3491.422 buffer_time=3.079 print_stall=0 extruder: target=220 temp=219.9 pwm=0.409
Stats 3488.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=492627 bytes_read=1102005 bytes_retransmit=0 bytes_invalid=0 send_seq=27930 receive_seq=27930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19564 bytes_read=62152 bytes_retransmit=0 bytes_invalid=0 send_seq=3235 receive_seq=3235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999345 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.074 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=305.130 memavail=696648 print_time=3491.422 buffer_time=2.078 print_stall=0 extruder: target=220 temp=219.5 pwm=0.409
Stats 3489.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=492838 bytes_read=1102440 bytes_retransmit=0 bytes_invalid=0 send_seq=27944 receive_seq=27944 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19570 bytes_read=62167 bytes_retransmit=0 bytes_invalid=0 send_seq=3236 receive_seq=3236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999343 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=1.00 cputime=305.247 memavail=696648 print_time=3491.422 buffer_time=1.077 print_stall=0 extruder: target=220 temp=219.2 pwm=0.470
Stats 3490.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=493221 bytes_read=1102915 bytes_retransmit=0 bytes_invalid=0 send_seq=27960 receive_seq=27960 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=19576 bytes_read=62182 bytes_retransmit=0 bytes_invalid=0 send_seq=3237 receive_seq=3237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999344 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.00 cputime=305.353 memavail=696544 print_time=3491.442 buffer_time=0.096 print_stall=0 extruder: target=220 temp=219.2 pwm=0.470
probe: TRIGGERED
Attaching Probe
moving to a safe Z distance
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3491.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=494893 bytes_read=1103558 bytes_retransmit=0 bytes_invalid=0 send_seq=28001 receive_seq=28001 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=19582 bytes_read=62210 bytes_retransmit=0 bytes_invalid=0 send_seq=3238 receive_seq=3238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999340 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.176 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.8 sysload=1.00 cputime=305.530 memavail=696660 print_time=3493.375 buffer_time=1.028 print_stall=0 extruder: target=220 temp=219.4 pwm=0.417
Stats 3492.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=495109 bytes_read=1103998 bytes_retransmit=0 bytes_invalid=0 send_seq=28016 receive_seq=28016 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=19588 bytes_read=62225 bytes_retransmit=0 bytes_invalid=0 send_seq=3239 receive_seq=3239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999334 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.103 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.92 cputime=305.650 memavail=696660 print_time=3493.375 buffer_time=0.027 print_stall=0 extruder: target=220 temp=219.9 pwm=0.290
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3493.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=495957 bytes_read=1104508 bytes_retransmit=0 bytes_invalid=0 send_seq=28042 receive_seq=28042 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=19594 bytes_read=62241 bytes_retransmit=0 bytes_invalid=0 send_seq=3240 receive_seq=3240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999333 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.056 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.3 sysload=0.92 cputime=305.795 memavail=696664 print_time=3494.342 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.219
Stats 3494.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000012 mcu_task_stddev=0.000027 bytes_write=496641 bytes_read=1105021 bytes_retransmit=0 bytes_invalid=0 send_seq=28063 receive_seq=28063 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=19600 bytes_read=62257 bytes_retransmit=0 bytes_invalid=0 send_seq=3241 receive_seq=3241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.056 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.92 cputime=305.939 memavail=696664 print_time=3495.691 buffer_time=0.343 print_stall=0 extruder: target=220 temp=220.7 pwm=0.168
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3495.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=496917 bytes_read=1105500 bytes_retransmit=0 bytes_invalid=0 send_seq=28080 receive_seq=28080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001292 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=19606 bytes_read=62273 bytes_retransmit=0 bytes_invalid=0 send_seq=3242 receive_seq=3242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999327 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.92 cputime=306.297 memavail=696364 print_time=3496.417 buffer_time=0.068 print_stall=0 extruder: target=220 temp=220.7 pwm=0.168
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3496.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=499186 bytes_read=1106151 bytes_retransmit=0 bytes_invalid=0 send_seq=28131 receive_seq=28131 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19612 bytes_read=62302 bytes_retransmit=0 bytes_invalid=0 send_seq=3243 receive_seq=3243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.033 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.92 cputime=306.484 memavail=696424 print_time=3498.834 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.234
Stats 3497.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=499413 bytes_read=1106634 bytes_retransmit=0 bytes_invalid=0 send_seq=28146 receive_seq=28146 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19618 bytes_read=62318 bytes_retransmit=0 bytes_invalid=0 send_seq=3244 receive_seq=3244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.137 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.85 cputime=306.602 memavail=696424 print_time=3498.834 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.380
probe at 30.000,5.000 is z=6.518500
Stats 3498.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=501390 bytes_read=1107511 bytes_retransmit=0 bytes_invalid=0 send_seq=28208 receive_seq=28208 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19624 bytes_read=62334 bytes_retransmit=0 bytes_invalid=0 send_seq=3245 receive_seq=3245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999322 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.85 cputime=306.773 memavail=696424 print_time=3499.884 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.431
probe at 30.000,5.000 is z=6.519125
Stats 3499.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=503112 bytes_read=1108320 bytes_retransmit=0 bytes_invalid=0 send_seq=28259 receive_seq=28259 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19630 bytes_read=62350 bytes_retransmit=0 bytes_invalid=0 send_seq=3246 receive_seq=3246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.85 cputime=306.919 memavail=696116 print_time=3500.664 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.431
probe at 30.000,5.000 is z=6.518500
Stats 3500.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=505752 bytes_read=1109247 bytes_retransmit=0 bytes_invalid=0 send_seq=28325 receive_seq=28325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19636 bytes_read=62366 bytes_retransmit=0 bytes_invalid=0 send_seq=3247 receive_seq=3247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999324 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.85 cputime=307.111 memavail=696180 print_time=3502.354 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.365
Stats 3501.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=506410 bytes_read=1109736 bytes_retransmit=0 bytes_invalid=0 send_seq=28347 receive_seq=28347 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19642 bytes_read=62395 bytes_retransmit=0 bytes_invalid=0 send_seq=3248 receive_seq=3248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.85 cputime=307.213 memavail=696180 print_time=3502.554 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.365
probe at 125.000,195.000 is z=6.544125
Stats 3502.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=508280 bytes_read=1110604 bytes_retransmit=0 bytes_invalid=0 send_seq=28407 receive_seq=28407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19648 bytes_read=62411 bytes_retransmit=0 bytes_invalid=0 send_seq=3249 receive_seq=3249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999316 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.0 sysload=0.78 cputime=307.368 memavail=696192 print_time=3503.546 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.282
probe at 125.000,195.000 is z=6.542875
Stats 3503.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=510316 bytes_read=1111509 bytes_retransmit=0 bytes_invalid=0 send_seq=28466 receive_seq=28466 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19654 bytes_read=62427 bytes_retransmit=0 bytes_invalid=0 send_seq=3250 receive_seq=3250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999315 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.048 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.78 cputime=307.532 memavail=696192 print_time=3504.529 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.211
probe at 125.000,195.000 is z=6.543500
Stats 3504.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=512401 bytes_read=1112285 bytes_retransmit=0 bytes_invalid=0 send_seq=28519 receive_seq=28519 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19660 bytes_read=62443 bytes_retransmit=0 bytes_invalid=0 send_seq=3251 receive_seq=3251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999317 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.78 cputime=307.704 memavail=696192 print_time=3505.881 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.6 pwm=0.211
Stats 3505.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=513565 bytes_read=1113085 bytes_retransmit=0 bytes_invalid=0 send_seq=28567 receive_seq=28566 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19672 bytes_read=62475 bytes_retransmit=0 bytes_invalid=0 send_seq=3253 receive_seq=3253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.077 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=21.9 sysload=0.78 cputime=307.861 memavail=696620 print_time=3506.582 buffer_time=0.225 print_stall=0 extruder: target=220 temp=220.5 pwm=0.211
probe at 220.000,5.000 is z=6.514750
probe at 220.000,5.000 is z=6.516625
Stats 3506.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=516146 bytes_read=1114025 bytes_retransmit=0 bytes_invalid=0 send_seq=28633 receive_seq=28633 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19678 bytes_read=62504 bytes_retransmit=0 bytes_invalid=0 send_seq=3254 receive_seq=3254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.78 cputime=308.005 memavail=696456 print_time=3507.720 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.270
probe at 220.000,5.000 is z=6.517250
Calculating bed tilt with: [[29.999999999516852, 4.9999999995818545, 6.51849999999543], [124.99999999983675, 194.99999999987585, 6.543499999989353], [219.99999999976637, 4.999999999600618, 6.516624999985484]]
Coordinate descent initial error: 0.0342908906187
Coordinate descent best_err: 2.0008887795e-10  rounds: 188
Calculated bed tilt parameters: {'y_adjust': 0.0001364383496508179, 'x_adjust': -9.903867147133765e-06, 'z_adjust': 6.518119255596233}
Making the following Z adjustments:
stepper_z = 0.098609
stepper_z1 = 0.136892
stepper_z2 = 0.095222
Retries: 0/5 Probed points range: 0.026875 tolerance: 0.007500
Stats 3507.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=519141 bytes_read=1114911 bytes_retransmit=0 bytes_invalid=0 send_seq=28706 receive_seq=28706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19684 bytes_read=62520 bytes_retransmit=0 bytes_invalid=0 send_seq=3255 receive_seq=3255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999337 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.72 cputime=308.261 memavail=696456 print_time=3509.543 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.363
Stats 3508.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=519406 bytes_read=1115380 bytes_retransmit=0 bytes_invalid=0 send_seq=28721 receive_seq=28721 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19690 bytes_read=62536 bytes_retransmit=0 bytes_invalid=0 send_seq=3256 receive_seq=3256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.054 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.0 sysload=0.72 cputime=308.349 memavail=696708 print_time=3509.543 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.363
probe at 30.000,5.000 is z=6.417903
Stats 3509.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=521347 bytes_read=1116281 bytes_retransmit=0 bytes_invalid=0 send_seq=28782 receive_seq=28782 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19696 bytes_read=62552 bytes_retransmit=0 bytes_invalid=0 send_seq=3257 receive_seq=3257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.72 cputime=308.515 memavail=696708 print_time=3510.594 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.5 pwm=0.414
probe at 30.000,5.000 is z=6.419778
Stats 3510.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=523440 bytes_read=1117135 bytes_retransmit=0 bytes_invalid=0 send_seq=28842 receive_seq=28842 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19702 bytes_read=62568 bytes_retransmit=0 bytes_invalid=0 send_seq=3258 receive_seq=3258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999340 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=0.72 cputime=308.675 memavail=696708 print_time=3511.534 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.414
probe at 30.000,5.000 is z=6.418528
Stats 3511.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=525802 bytes_read=1118003 bytes_retransmit=0 bytes_invalid=0 send_seq=28902 receive_seq=28902 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19708 bytes_read=62597 bytes_retransmit=0 bytes_invalid=0 send_seq=3259 receive_seq=3259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999340 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.72 cputime=308.861 memavail=696468 print_time=3513.091 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.340
Stats 3512.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=526695 bytes_read=1118594 bytes_retransmit=0 bytes_invalid=0 send_seq=28933 receive_seq=28933 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19714 bytes_read=62613 bytes_retransmit=0 bytes_invalid=0 send_seq=3260 receive_seq=3260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999336 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.174 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.7 sysload=0.66 cputime=308.982 memavail=696468 print_time=3513.541 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.233
probe at 125.000,195.000 is z=6.416028
Stats 3513.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=528681 bytes_read=1119558 bytes_retransmit=0 bytes_invalid=0 send_seq=28999 receive_seq=28998 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19720 bytes_read=62629 bytes_retransmit=0 bytes_invalid=0 send_seq=3261 receive_seq=3261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999340 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.66 cputime=309.123 memavail=696468 print_time=3514.598 buffer_time=0.235 print_stall=0 extruder: target=220 temp=220.3 pwm=0.233
probe at 125.000,195.000 is z=6.415403
probe at 125.000,195.000 is z=6.416028
Stats 3514.2: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=532215 bytes_read=1120611 bytes_retransmit=0 bytes_invalid=0 send_seq=29083 receive_seq=29083 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19726 bytes_read=62645 bytes_retransmit=0 bytes_invalid=0 send_seq=3262 receive_seq=3262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.66 cputime=309.327 memavail=696472 print_time=3516.647 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.233
Stats 3515.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=532430 bytes_read=1121096 bytes_retransmit=0 bytes_invalid=0 send_seq=29098 receive_seq=29098 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19732 bytes_read=62661 bytes_retransmit=0 bytes_invalid=0 send_seq=3263 receive_seq=3263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.2 sysload=0.66 cputime=309.403 memavail=696456 print_time=3516.647 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.233
probe at 220.000,5.000 is z=6.416653
Stats 3516.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=534379 bytes_read=1121968 bytes_retransmit=0 bytes_invalid=0 send_seq=29159 receive_seq=29159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19738 bytes_read=62690 bytes_retransmit=0 bytes_invalid=0 send_seq=3264 receive_seq=3264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999341 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.66 cputime=309.570 memavail=696220 print_time=3517.710 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.288
probe at 220.000,5.000 is z=6.418528
Stats 3517.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=536197 bytes_read=1122806 bytes_retransmit=0 bytes_invalid=0 send_seq=29213 receive_seq=29213 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19744 bytes_read=62706 bytes_retransmit=0 bytes_invalid=0 send_seq=3265 receive_seq=3265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999337 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.106 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=21.9 sysload=0.69 cputime=309.729 memavail=696228 print_time=3518.546 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.339
probe at 220.000,5.000 is z=6.419778
Calculating bed tilt with: [[29.999999999516845, 4.99999999958186, 6.418528179490449], [124.99999999983675, 194.99999999987585, 6.416028179485736], [219.99999999976637, 4.999999999600618, 6.418528179481751]]
Coordinate descent initial error: 2.01078694478e-05
Coordinate descent best_err: 1.51672845984e-10  rounds: 182
Calculated bed tilt parameters: {'y_adjust': -1.3150736380987313e-05, 'x_adjust': -8.871492338563129e-08, 'z_adjust': 6.418602897826779}
Making the following Z adjustments:
stepper_z = -0.001396
stepper_z1 = -0.005265
stepper_z2 = -0.001427
Retries: 1/5 Probed points range: 0.002500 tolerance: 0.007500
Docking Probe
Stats 3518.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=538438 bytes_read=1123669 bytes_retransmit=0 bytes_invalid=0 send_seq=29272 receive_seq=29272 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19750 bytes_read=62722 bytes_retransmit=0 bytes_invalid=0 send_seq=3266 receive_seq=3266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999331 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.69 cputime=309.930 memavail=696228 print_time=3519.616 buffer_time=0.250 print_stall=0 extruder: target=220 temp=219.7 pwm=0.402
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3519.2: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=540509 bytes_read=1124262 bytes_retransmit=0 bytes_invalid=0 send_seq=29316 receive_seq=29316 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19756 bytes_read=62738 bytes_retransmit=0 bytes_invalid=0 send_seq=3267 receive_seq=3267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999682 adj=49999324 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.69 cputime=310.120 memavail=696228 print_time=3522.051 buffer_time=1.684 print_stall=0 extruder: target=220 temp=219.6 pwm=0.402
Stats 3520.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=540709 bytes_read=1124756 bytes_retransmit=0 bytes_invalid=0 send_seq=29330 receive_seq=29330 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19762 bytes_read=62754 bytes_retransmit=0 bytes_invalid=0 send_seq=3268 receive_seq=3268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999315 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.69 cputime=310.233 memavail=695980 print_time=3522.051 buffer_time=0.682 print_stall=0 extruder: target=220 temp=219.6 pwm=0.402
Stats 3521.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=541395 bytes_read=1125255 bytes_retransmit=0 bytes_invalid=0 send_seq=29354 receive_seq=29354 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19768 bytes_read=62770 bytes_retransmit=0 bytes_invalid=0 send_seq=3269 receive_seq=3269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999317 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.69 cputime=310.389 memavail=695980 print_time=3523.533 buffer_time=1.164 print_stall=0 extruder: target=220 temp=219.9 pwm=0.309
Stats 3522.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=541653 bytes_read=1125695 bytes_retransmit=0 bytes_invalid=0 send_seq=29369 receive_seq=29369 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19774 bytes_read=62799 bytes_retransmit=0 bytes_invalid=0 send_seq=3270 receive_seq=3270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999315 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.148 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.71 cputime=310.500 memavail=695980 print_time=3523.533 buffer_time=0.163 print_stall=0 extruder: target=220 temp=220.2 pwm=0.243
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3523.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=542163 bytes_read=1126199 bytes_retransmit=0 bytes_invalid=0 send_seq=29388 receive_seq=29388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=2 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19780 bytes_read=62815 bytes_retransmit=0 bytes_invalid=0 send_seq=3271 receive_seq=3271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999316 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.071 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.71 cputime=310.744 memavail=696244 print_time=3525.624 buffer_time=1.248 print_stall=0 extruder: target=220 temp=220.4 pwm=0.243
Stats 3524.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=542362 bytes_read=1126648 bytes_retransmit=0 bytes_invalid=0 send_seq=29402 receive_seq=29402 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19786 bytes_read=62831 bytes_retransmit=0 bytes_invalid=0 send_seq=3272 receive_seq=3272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999325 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.071 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.71 cputime=310.816 memavail=696244 print_time=3525.624 buffer_time=0.248 print_stall=0 extruder: target=220 temp=220.5 pwm=0.243
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Homing Z
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Probe already docked
Stats 3525.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=542640 bytes_read=1127164 bytes_retransmit=0 bytes_invalid=0 send_seq=29422 receive_seq=29422 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19792 bytes_read=62847 bytes_retransmit=0 bytes_invalid=0 send_seq=3273 receive_seq=3273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999337 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.71 cputime=311.189 memavail=696168 print_time=3526.583 buffer_time=0.206 print_stall=0 extruder: target=220 temp=220.3 pwm=0.293
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3526.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=543429 bytes_read=1127725 bytes_retransmit=0 bytes_invalid=0 send_seq=29448 receive_seq=29448 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19798 bytes_read=62863 bytes_retransmit=0 bytes_invalid=0 send_seq=3274 receive_seq=3274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999336 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.066 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.71 cputime=311.408 memavail=696256 print_time=3527.624 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.293
Stats 3527.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=544655 bytes_read=1128446 bytes_retransmit=0 bytes_invalid=0 send_seq=29494 receive_seq=29494 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19804 bytes_read=62892 bytes_retransmit=0 bytes_invalid=0 send_seq=3275 receive_seq=3275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999336 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.73 cputime=311.548 memavail=696256 print_time=3528.574 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.363
Stats 3528.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=545479 bytes_read=1129166 bytes_retransmit=0 bytes_invalid=0 send_seq=29537 receive_seq=29537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19810 bytes_read=62908 bytes_retransmit=0 bytes_invalid=0 send_seq=3276 receive_seq=3276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.73 cputime=311.709 memavail=696256 print_time=3529.574 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.363
Stats 3529.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=547429 bytes_read=1130178 bytes_retransmit=0 bytes_invalid=0 send_seq=29606 receive_seq=29606 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19816 bytes_read=62924 bytes_retransmit=0 bytes_invalid=0 send_seq=3277 receive_seq=3277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999346 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.73 cputime=311.897 memavail=696016 print_time=3531.123 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.363
Stats 3530.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=548210 bytes_read=1130758 bytes_retransmit=0 bytes_invalid=0 send_seq=29635 receive_seq=29635 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19822 bytes_read=62940 bytes_retransmit=0 bytes_invalid=0 send_seq=3278 receive_seq=3278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.117 raspberry_pi: temp=40.8 mcu_temp: temp=37.0 chamber: temp=22.2 sysload=0.73 cputime=312.023 memavail=696016 print_time=3531.573 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.363
Stats 3531.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=550497 bytes_read=1131689 bytes_retransmit=0 bytes_invalid=0 send_seq=29704 receive_seq=29704 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=19828 bytes_read=62956 bytes_retransmit=0 bytes_invalid=0 send_seq=3279 receive_seq=3279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.73 cputime=312.287 memavail=696016 print_time=3534.536 buffer_time=2.155 print_stall=0 extruder: target=220 temp=219.7 pwm=0.363
Stats 3532.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=550719 bytes_read=1132168 bytes_retransmit=0 bytes_invalid=0 send_seq=29718 receive_seq=29718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19834 bytes_read=62985 bytes_retransmit=0 bytes_invalid=0 send_seq=3280 receive_seq=3280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=21.8 sysload=0.76 cputime=312.377 memavail=695680 print_time=3534.536 buffer_time=1.155 print_stall=0 extruder: target=220 temp=219.9 pwm=0.305
Stats 3533.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=550903 bytes_read=1132612 bytes_retransmit=0 bytes_invalid=0 send_seq=29731 receive_seq=29731 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19840 bytes_read=63001 bytes_retransmit=0 bytes_invalid=0 send_seq=3281 receive_seq=3281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.76 cputime=312.456 memavail=695776 print_time=3534.536 buffer_time=0.154 print_stall=0 extruder: target=220 temp=220.0 pwm=0.305
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3534.2: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=552673 bytes_read=1133227 bytes_retransmit=0 bytes_invalid=0 send_seq=29775 receive_seq=29775 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19846 bytes_read=63017 bytes_retransmit=0 bytes_invalid=0 send_seq=3282 receive_seq=3282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999328 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.046 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.76 cputime=312.880 memavail=695768 print_time=3540.748 buffer_time=5.365 print_stall=0 extruder: target=220 temp=220.2 pwm=0.239
Stats 3535.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=552888 bytes_read=1133726 bytes_retransmit=0 bytes_invalid=0 send_seq=29790 receive_seq=29790 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19852 bytes_read=63033 bytes_retransmit=0 bytes_invalid=0 send_seq=3283 receive_seq=3283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999326 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.082 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.76 cputime=312.985 memavail=695504 print_time=3540.748 buffer_time=4.364 print_stall=0 extruder: target=220 temp=220.2 pwm=0.239
Stats 3536.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=553067 bytes_read=1134165 bytes_retransmit=0 bytes_invalid=0 send_seq=29802 receive_seq=29802 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19858 bytes_read=63049 bytes_retransmit=0 bytes_invalid=0 send_seq=3284 receive_seq=3284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999329 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.082 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.76 cputime=313.100 memavail=695536 print_time=3540.748 buffer_time=3.363 print_stall=0 extruder: target=220 temp=220.2 pwm=0.239
Stats 3537.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=553267 bytes_read=1134600 bytes_retransmit=0 bytes_invalid=0 send_seq=29816 receive_seq=29816 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19864 bytes_read=63078 bytes_retransmit=0 bytes_invalid=0 send_seq=3285 receive_seq=3285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.082 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.78 cputime=313.222 memavail=695536 print_time=3540.748 buffer_time=2.358 print_stall=0 extruder: target=220 temp=220.0 pwm=0.326
Stats 3538.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=554174 bytes_read=1135134 bytes_retransmit=0 bytes_invalid=0 send_seq=29841 receive_seq=29841 retransmit_seq=0 srtt=0.002 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19870 bytes_read=63094 bytes_retransmit=0 bytes_invalid=0 send_seq=3286 receive_seq=3286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999350 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=21.9 sysload=0.78 cputime=313.356 memavail=695788 print_time=3541.851 buffer_time=2.460 print_stall=0 extruder: target=220 temp=219.8 pwm=0.376
Stats 3539.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000020 bytes_write=554733 bytes_read=1135608 bytes_retransmit=0 bytes_invalid=0 send_seq=29860 receive_seq=29860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19876 bytes_read=63110 bytes_retransmit=0 bytes_invalid=0 send_seq=3287 receive_seq=3287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999347 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.78 cputime=313.489 memavail=695788 print_time=3542.399 buffer_time=2.008 print_stall=0 extruder: target=220 temp=219.7 pwm=0.376
Stats 3540.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=555382 bytes_read=1136083 bytes_retransmit=0 bytes_invalid=0 send_seq=29879 receive_seq=29879 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19882 bytes_read=63126 bytes_retransmit=0 bytes_invalid=0 send_seq=3288 receive_seq=3288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.088 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.78 cputime=313.637 memavail=695788 print_time=3543.496 buffer_time=2.104 print_stall=0 extruder: target=220 temp=219.6 pwm=0.376
Stats 3541.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=556524 bytes_read=1136627 bytes_retransmit=0 bytes_invalid=0 send_seq=29906 receive_seq=29906 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=19888 bytes_read=63142 bytes_retransmit=0 bytes_invalid=0 send_seq=3289 receive_seq=3289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999350 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.203 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.78 cputime=313.791 memavail=695792 print_time=3544.592 buffer_time=2.199 print_stall=0 extruder: target=220 temp=219.7 pwm=0.376
Stats 3542.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=557558 bytes_read=1137146 bytes_retransmit=0 bytes_invalid=0 send_seq=29934 receive_seq=29934 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19894 bytes_read=63171 bytes_retransmit=0 bytes_invalid=0 send_seq=3290 receive_seq=3290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999340 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.79 cputime=314.013 memavail=695792 print_time=3546.219 buffer_time=2.825 print_stall=0 extruder: target=220 temp=219.8 pwm=0.325
Stats 3543.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=558143 bytes_read=1137611 bytes_retransmit=0 bytes_invalid=0 send_seq=29954 receive_seq=29954 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19900 bytes_read=63187 bytes_retransmit=0 bytes_invalid=0 send_seq=3291 receive_seq=3291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999328 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.181 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.79 cputime=314.115 memavail=695792 print_time=3547.599 buffer_time=3.204 print_stall=0 extruder: target=220 temp=220.2 pwm=0.253
Stats 3544.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=558343 bytes_read=1138090 bytes_retransmit=0 bytes_invalid=0 send_seq=29968 receive_seq=29968 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19906 bytes_read=63203 bytes_retransmit=0 bytes_invalid=0 send_seq=3292 receive_seq=3292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999328 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.111 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.79 cputime=314.217 memavail=695792 print_time=3547.599 buffer_time=2.203 print_stall=0 extruder: target=220 temp=220.2 pwm=0.253
Stats 3545.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=558754 bytes_read=1138564 bytes_retransmit=0 bytes_invalid=0 send_seq=29984 receive_seq=29984 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19912 bytes_read=63219 bytes_retransmit=0 bytes_invalid=0 send_seq=3293 receive_seq=3293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999318 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.111 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=0.79 cputime=314.344 memavail=695792 print_time=3548.979 buffer_time=2.582 print_stall=0 extruder: target=220 temp=220.2 pwm=0.253
Stats 3546.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=559532 bytes_read=1139044 bytes_retransmit=0 bytes_invalid=0 send_seq=30007 receive_seq=30007 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=19918 bytes_read=63235 bytes_retransmit=0 bytes_invalid=0 send_seq=3294 receive_seq=3294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.79 cputime=314.467 memavail=696064 print_time=3550.058 buffer_time=2.660 print_stall=0 extruder: target=220 temp=219.9 pwm=0.371
Stats 3547.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=560115 bytes_read=1139558 bytes_retransmit=0 bytes_invalid=0 send_seq=30028 receive_seq=30028 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=19924 bytes_read=63264 bytes_retransmit=0 bytes_invalid=0 send_seq=3295 receive_seq=3295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999309 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.89 cputime=314.589 memavail=696064 print_time=3550.606 buffer_time=2.207 print_stall=0 extruder: target=220 temp=219.7 pwm=0.371
Stats 3548.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=560764 bytes_read=1140032 bytes_retransmit=0 bytes_invalid=0 send_seq=30047 receive_seq=30047 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=19930 bytes_read=63280 bytes_retransmit=0 bytes_invalid=0 send_seq=3296 receive_seq=3296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999300 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.89 cputime=314.733 memavail=696064 print_time=3551.703 buffer_time=2.303 print_stall=0 extruder: target=220 temp=219.6 pwm=0.371
Stats 3549.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000021 bytes_write=561395 bytes_read=1140497 bytes_retransmit=0 bytes_invalid=0 send_seq=30067 receive_seq=30067 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=19936 bytes_read=63296 bytes_retransmit=0 bytes_invalid=0 send_seq=3297 receive_seq=3297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999282 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.159 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.0 sysload=0.89 cputime=314.879 memavail=696056 print_time=3552.799 buffer_time=2.399 print_stall=0 extruder: target=220 temp=219.6 pwm=0.371
Attaching Probe
moving to a safe Z distance
Stats 3550.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=562762 bytes_read=1141090 bytes_retransmit=0 bytes_invalid=0 send_seq=30098 receive_seq=30098 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=19942 bytes_read=63312 bytes_retransmit=0 bytes_invalid=0 send_seq=3298 receive_seq=3298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999281 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.159 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.89 cputime=315.080 memavail=695816 print_time=3555.806 buffer_time=4.378 print_stall=0 extruder: target=220 temp=219.8 pwm=0.318
Stats 3551.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=563331 bytes_read=1141560 bytes_retransmit=0 bytes_invalid=0 send_seq=30119 receive_seq=30119 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=19948 bytes_read=63328 bytes_retransmit=0 bytes_invalid=0 send_seq=3299 receive_seq=3299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999310 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.064 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.89 cputime=315.200 memavail=695816 print_time=3555.806 buffer_time=3.377 print_stall=0 extruder: target=220 temp=219.8 pwm=0.318
Stats 3552.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=563541 bytes_read=1142010 bytes_retransmit=0 bytes_invalid=0 send_seq=30133 receive_seq=30133 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=2 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19954 bytes_read=63357 bytes_retransmit=0 bytes_invalid=0 send_seq=3300 receive_seq=3300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999310 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.90 cputime=315.308 memavail=695816 print_time=3555.806 buffer_time=2.377 print_stall=0 extruder: target=220 temp=219.9 pwm=0.318
Stats 3553.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=563736 bytes_read=1142483 bytes_retransmit=0 bytes_invalid=0 send_seq=30146 receive_seq=30146 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19960 bytes_read=63373 bytes_retransmit=0 bytes_invalid=0 send_seq=3301 receive_seq=3301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999309 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.90 cputime=315.418 memavail=695816 print_time=3555.806 buffer_time=1.376 print_stall=0 extruder: target=220 temp=220.0 pwm=0.318
Stats 3554.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=564083 bytes_read=1142915 bytes_retransmit=0 bytes_invalid=0 send_seq=30162 receive_seq=30162 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19966 bytes_read=63389 bytes_retransmit=0 bytes_invalid=0 send_seq=3302 receive_seq=3302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999317 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.90 cputime=315.532 memavail=695808 print_time=3555.826 buffer_time=0.395 print_stall=0 extruder: target=220 temp=220.0 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3555.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=565709 bytes_read=1143512 bytes_retransmit=0 bytes_invalid=0 send_seq=30201 receive_seq=30201 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19972 bytes_read=63405 bytes_retransmit=0 bytes_invalid=0 send_seq=3303 receive_seq=3303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999318 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.90 cputime=315.702 memavail=696220 print_time=3557.786 buffer_time=1.355 print_stall=0 extruder: target=220 temp=220.1 pwm=0.337
Stats 3556.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=565893 bytes_read=1143985 bytes_retransmit=0 bytes_invalid=0 send_seq=30214 receive_seq=30214 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=19978 bytes_read=63421 bytes_retransmit=0 bytes_invalid=0 send_seq=3304 receive_seq=3304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999329 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.90 cputime=315.807 memavail=696072 print_time=3557.786 buffer_time=0.354 print_stall=0 extruder: target=220 temp=220.1 pwm=0.337
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3557.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=566675 bytes_read=1144470 bytes_retransmit=0 bytes_invalid=0 send_seq=30238 receive_seq=30238 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19984 bytes_read=63450 bytes_retransmit=0 bytes_invalid=0 send_seq=3305 receive_seq=3305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999351 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.2 sysload=0.91 cputime=315.959 memavail=696072 print_time=3558.752 buffer_time=0.319 print_stall=0 extruder: target=220 temp=220.2 pwm=0.279
Stats 3558.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=567333 bytes_read=1144950 bytes_retransmit=0 bytes_invalid=0 send_seq=30258 receive_seq=30258 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19990 bytes_read=63466 bytes_retransmit=0 bytes_invalid=0 send_seq=3306 receive_seq=3306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999388 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.91 cputime=316.092 memavail=696072 print_time=3560.115 buffer_time=0.682 print_stall=0 extruder: target=220 temp=220.3 pwm=0.279
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3559.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000009 mcu_task_stddev=0.000019 bytes_write=567532 bytes_read=1145428 bytes_retransmit=0 bytes_invalid=0 send_seq=30272 receive_seq=30272 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=19996 bytes_read=63482 bytes_retransmit=0 bytes_invalid=0 send_seq=3307 receive_seq=3307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999413 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.072 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.91 cputime=316.294 memavail=696072 print_time=3560.507 buffer_time=0.073 print_stall=0 extruder: target=220 temp=220.3 pwm=0.279
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Z Offset calibration
Probe locked!
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Docking Probe
Stats 3560.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=568555 bytes_read=1145994 bytes_retransmit=0 bytes_invalid=0 send_seq=30302 receive_seq=30302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20002 bytes_read=63498 bytes_retransmit=0 bytes_invalid=0 send_seq=3308 receive_seq=3308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999408 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.91 cputime=316.740 memavail=696072 print_time=3562.427 buffer_time=0.993 print_stall=0 extruder: target=220 temp=220.4 pwm=0.279
Stats 3561.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=568739 bytes_read=1146439 bytes_retransmit=0 bytes_invalid=0 send_seq=30315 receive_seq=30315 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20008 bytes_read=63514 bytes_retransmit=0 bytes_invalid=0 send_seq=3309 receive_seq=3309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999405 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.91 cputime=316.830 memavail=696072 print_time=3562.427 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.279
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3562.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=569994 bytes_read=1147020 bytes_retransmit=0 bytes_invalid=0 send_seq=30348 receive_seq=30348 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20014 bytes_read=63543 bytes_retransmit=0 bytes_invalid=0 send_seq=3310 receive_seq=3310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999329 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.92 cputime=317.025 memavail=696336 print_time=3564.636 buffer_time=1.199 print_stall=0 extruder: target=220 temp=220.1 pwm=0.304
Stats 3563.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=570230 bytes_read=1147460 bytes_retransmit=0 bytes_invalid=0 send_seq=30363 receive_seq=30363 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20020 bytes_read=63559 bytes_retransmit=0 bytes_invalid=0 send_seq=3311 receive_seq=3311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999288 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.92 cputime=317.144 memavail=696336 print_time=3564.636 buffer_time=0.194 print_stall=0 extruder: target=220 temp=220.1 pwm=0.304
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3564.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=570725 bytes_read=1147974 bytes_retransmit=0 bytes_invalid=0 send_seq=30381 receive_seq=30381 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20026 bytes_read=63575 bytes_retransmit=0 bytes_invalid=0 send_seq=3312 receive_seq=3312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.92 cputime=317.398 memavail=696336 print_time=3566.739 buffer_time=1.249 print_stall=0 extruder: target=220 temp=219.9 pwm=0.358
Stats 3565.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=570924 bytes_read=1148423 bytes_retransmit=0 bytes_invalid=0 send_seq=30395 receive_seq=30395 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20032 bytes_read=63591 bytes_retransmit=0 bytes_invalid=0 send_seq=3313 receive_seq=3313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999384 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.92 cputime=317.474 memavail=696780 print_time=3566.739 buffer_time=0.247 print_stall=0 extruder: target=220 temp=219.9 pwm=0.358
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3566.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=571581 bytes_read=1148925 bytes_retransmit=0 bytes_invalid=0 send_seq=30418 receive_seq=30418 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20038 bytes_read=63607 bytes_retransmit=0 bytes_invalid=0 send_seq=3314 receive_seq=3314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999406 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.92 cputime=317.666 memavail=696852 print_time=3567.802 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.358
Stats 3567.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=572740 bytes_read=1149661 bytes_retransmit=0 bytes_invalid=0 send_seq=30461 receive_seq=30461 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20044 bytes_read=63636 bytes_retransmit=0 bytes_invalid=0 send_seq=3315 receive_seq=3315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999402 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.92 cputime=317.803 memavail=696852 print_time=3568.702 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.305
Stats 3568.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=573564 bytes_read=1150395 bytes_retransmit=0 bytes_invalid=0 send_seq=30504 receive_seq=30504 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20050 bytes_read=63652 bytes_retransmit=0 bytes_invalid=0 send_seq=3316 receive_seq=3316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999359 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.92 cputime=317.945 memavail=696604 print_time=3569.702 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.305
probe at 143.000,256.000 is z=-0.374000
Stats 3569.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=575689 bytes_read=1151393 bytes_retransmit=0 bytes_invalid=0 send_seq=30576 receive_seq=30576 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20056 bytes_read=63668 bytes_retransmit=0 bytes_invalid=0 send_seq=3317 receive_seq=3317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999351 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.92 cputime=318.119 memavail=696604 print_time=3571.273 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.241
Stats 3570.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=576462 bytes_read=1151974 bytes_retransmit=0 bytes_invalid=0 send_seq=30602 receive_seq=30602 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20062 bytes_read=63684 bytes_retransmit=0 bytes_invalid=0 send_seq=3318 receive_seq=3318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999361 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.92 cputime=318.232 memavail=696604 print_time=3571.673 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.241
probe at 143.000,256.000 is z=-0.369625
Stats 3571.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=578493 bytes_read=1152927 bytes_retransmit=0 bytes_invalid=0 send_seq=30668 receive_seq=30668 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20068 bytes_read=63700 bytes_retransmit=0 bytes_invalid=0 send_seq=3319 receive_seq=3319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999317 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.92 cputime=318.397 memavail=696612 print_time=3573.143 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.241
Stats 3572.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=579304 bytes_read=1153508 bytes_retransmit=0 bytes_invalid=0 send_seq=30700 receive_seq=30700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20074 bytes_read=63729 bytes_retransmit=0 bytes_invalid=0 send_seq=3320 receive_seq=3320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999354 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.177 raspberry_pi: temp=39.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.93 cputime=318.520 memavail=696612 print_time=3573.693 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.314
probe at 143.000,256.000 is z=-0.368375
Stats 3573.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=581257 bytes_read=1154467 bytes_retransmit=0 bytes_invalid=0 send_seq=30764 receive_seq=30764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20080 bytes_read=63744 bytes_retransmit=0 bytes_invalid=0 send_seq=3321 receive_seq=3321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999368 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.184 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.93 cputime=318.698 memavail=696612 print_time=3575.011 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.378
Stats 3574.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=582162 bytes_read=1155125 bytes_retransmit=0 bytes_invalid=0 send_seq=30800 receive_seq=30800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20086 bytes_read=63759 bytes_retransmit=0 bytes_invalid=0 send_seq=3322 receive_seq=3322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.086 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.93 cputime=318.827 memavail=696616 print_time=3575.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.378
probe at 143.000,256.000 is z=-0.370250
Attaching Probe
moving to a safe Z distance
Stats 3575.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=583957 bytes_read=1155982 bytes_retransmit=0 bytes_invalid=0 send_seq=30858 receive_seq=30858 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20092 bytes_read=63774 bytes_retransmit=0 bytes_invalid=0 send_seq=3323 receive_seq=3323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.93 cputime=318.995 memavail=697016 print_time=3576.852 buffer_time=0.353 print_stall=0 extruder: target=220 temp=219.5 pwm=0.378
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3576.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=585585 bytes_read=1156589 bytes_retransmit=0 bytes_invalid=0 send_seq=30896 receive_seq=30896 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20104 bytes_read=63804 bytes_retransmit=0 bytes_invalid=0 send_seq=3325 receive_seq=3325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999324 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=21.9 sysload=0.93 cputime=319.162 memavail=697124 print_time=3579.016 buffer_time=1.516 print_stall=0 extruder: target=220 temp=219.5 pwm=0.378
Stats 3577.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=585796 bytes_read=1157038 bytes_retransmit=0 bytes_invalid=0 send_seq=30910 receive_seq=30910 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20110 bytes_read=63832 bytes_retransmit=0 bytes_invalid=0 send_seq=3326 receive_seq=3326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999238 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.133 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.93 cputime=319.269 memavail=697136 print_time=3579.016 buffer_time=0.515 print_stall=0 extruder: target=220 temp=219.7 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3578.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=586499 bytes_read=1157506 bytes_retransmit=0 bytes_invalid=0 send_seq=30933 receive_seq=30933 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20116 bytes_read=63848 bytes_retransmit=0 bytes_invalid=0 send_seq=3327 receive_seq=3327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999278 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.133 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.93 cputime=319.405 memavail=697136 print_time=3579.590 buffer_time=0.089 print_stall=0 extruder: target=220 temp=219.8 pwm=0.330
Stats 3579.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=587194 bytes_read=1158036 bytes_retransmit=0 bytes_invalid=0 send_seq=30956 receive_seq=30956 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20122 bytes_read=63864 bytes_retransmit=0 bytes_invalid=0 send_seq=3328 receive_seq=3328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999373 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.232 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.93 cputime=319.554 memavail=697136 print_time=3580.931 buffer_time=0.429 print_stall=0 extruder: target=220 temp=220.1 pwm=0.279
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3580.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=587432 bytes_read=1158509 bytes_retransmit=0 bytes_invalid=0 send_seq=30972 receive_seq=30972 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20128 bytes_read=63880 bytes_retransmit=0 bytes_invalid=0 send_seq=3329 receive_seq=3329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999344 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.149 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.93 cputime=319.843 memavail=697136 print_time=3581.644 buffer_time=0.142 print_stall=0 extruder: target=220 temp=220.3 pwm=0.279
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3581.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=588539 bytes_read=1159075 bytes_retransmit=0 bytes_invalid=0 send_seq=31005 receive_seq=31005 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001374 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20134 bytes_read=63896 bytes_retransmit=0 bytes_invalid=0 send_seq=3330 receive_seq=3330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999136 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.151 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.93 cputime=319.968 memavail=697136 print_time=3582.673 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.221
Stats 3582.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=589484 bytes_read=1159844 bytes_retransmit=0 bytes_invalid=0 send_seq=31049 receive_seq=31049 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=20140 bytes_read=63925 bytes_retransmit=0 bytes_invalid=0 send_seq=3331 receive_seq=3331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999303 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.203 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.86 cputime=320.122 memavail=697136 print_time=3583.673 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.4 pwm=0.221
probe at 136.000,235.000 is z=6.401000
Stats 3583.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=591524 bytes_read=1160831 bytes_retransmit=0 bytes_invalid=0 send_seq=31119 receive_seq=31119 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=20146 bytes_read=63941 bytes_retransmit=0 bytes_invalid=0 send_seq=3332 receive_seq=3332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999347 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.151 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.86 cputime=320.311 memavail=697284 print_time=3585.299 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.286
Stats 3584.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=592302 bytes_read=1161398 bytes_retransmit=0 bytes_invalid=0 send_seq=31148 receive_seq=31148 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=20152 bytes_read=63957 bytes_retransmit=0 bytes_invalid=0 send_seq=3333 receive_seq=3333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999361 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.169 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.86 cputime=320.400 memavail=697400 print_time=3585.699 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.340
probe at 136.000,235.000 is z=6.404125
Stats 3585.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=594346 bytes_read=1162381 bytes_retransmit=0 bytes_invalid=0 send_seq=31214 receive_seq=31214 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=20158 bytes_read=63973 bytes_retransmit=0 bytes_invalid=0 send_seq=3334 receive_seq=3334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999376 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.86 cputime=320.575 memavail=696848 print_time=3587.167 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.340
Stats 3586.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=595125 bytes_read=1162966 bytes_retransmit=0 bytes_invalid=0 send_seq=31244 receive_seq=31244 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=20164 bytes_read=63989 bytes_retransmit=0 bytes_invalid=0 send_seq=3335 receive_seq=3335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999411 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.113 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.86 cputime=320.695 memavail=696648 print_time=3587.717 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.340
probe at 136.000,235.000 is z=6.404750
Stats 3587.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=597054 bytes_read=1163866 bytes_retransmit=0 bytes_invalid=0 send_seq=31305 receive_seq=31305 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20170 bytes_read=64018 bytes_retransmit=0 bytes_invalid=0 send_seq=3336 receive_seq=3336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999435 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.113 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.95 cputime=320.867 memavail=696648 print_time=3589.044 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.340
Stats 3588.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=597945 bytes_read=1164520 bytes_retransmit=0 bytes_invalid=0 send_seq=31340 receive_seq=31340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20176 bytes_read=64034 bytes_retransmit=0 bytes_invalid=0 send_seq=3337 receive_seq=3337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999376 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.95 cputime=320.998 memavail=696648 print_time=3589.694 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.356
probe at 136.000,235.000 is z=6.403500
Stats 3589.3: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=600399 bytes_read=1165465 bytes_retransmit=0 bytes_invalid=0 send_seq=31410 receive_seq=31410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20182 bytes_read=64050 bytes_retransmit=0 bytes_invalid=0 send_seq=3338 receive_seq=3338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999341 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.95 cputime=321.210 memavail=696656 print_time=3592.620 buffer_time=2.100 print_stall=0 extruder: target=220 temp=219.9 pwm=0.356
Stats 3590.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=600636 bytes_read=1165941 bytes_retransmit=0 bytes_invalid=0 send_seq=31427 receive_seq=31427 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20188 bytes_read=64066 bytes_retransmit=0 bytes_invalid=0 send_seq=3339 receive_seq=3339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999306 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.95 cputime=321.313 memavail=696656 print_time=3592.620 buffer_time=1.100 print_stall=0 extruder: target=220 temp=220.1 pwm=0.274
Stats 3591.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=600851 bytes_read=1166425 bytes_retransmit=0 bytes_invalid=0 send_seq=31442 receive_seq=31442 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20194 bytes_read=64082 bytes_retransmit=0 bytes_invalid=0 send_seq=3340 receive_seq=3340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999328 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.065 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.95 cputime=321.428 memavail=696656 print_time=3592.620 buffer_time=0.099 print_stall=0 extruder: target=220 temp=220.3 pwm=0.274
Stats 3592.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=602001 bytes_read=1167126 bytes_retransmit=0 bytes_invalid=0 send_seq=31484 receive_seq=31484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20200 bytes_read=64111 bytes_retransmit=0 bytes_invalid=0 send_seq=3341 receive_seq=3341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999300 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.155 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.87 cputime=321.579 memavail=696668 print_time=3593.697 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.274
Stats 3593.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=602825 bytes_read=1167836 bytes_retransmit=0 bytes_invalid=0 send_seq=31525 receive_seq=31525 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20206 bytes_read=64127 bytes_retransmit=0 bytes_invalid=0 send_seq=3342 receive_seq=3342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999356 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.87 cputime=321.733 memavail=696668 print_time=3594.697 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.274
probe at 116.000,75.250 is z=6.564750
Stats 3594.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=604773 bytes_read=1168685 bytes_retransmit=0 bytes_invalid=0 send_seq=31581 receive_seq=31581 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20212 bytes_read=64143 bytes_retransmit=0 bytes_invalid=0 send_seq=3343 receive_seq=3343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999351 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.080 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.87 cputime=321.898 memavail=696668 print_time=3595.704 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.260
probe at 116.000,75.250 is z=6.561625
Stats 3595.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=606836 bytes_read=1169682 bytes_retransmit=0 bytes_invalid=0 send_seq=31650 receive_seq=31650 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20218 bytes_read=64159 bytes_retransmit=0 bytes_invalid=0 send_seq=3344 receive_seq=3344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999332 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.080 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.87 cputime=322.087 memavail=696564 print_time=3597.293 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.313
Stats 3596.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=607583 bytes_read=1170224 bytes_retransmit=0 bytes_invalid=0 send_seq=31677 receive_seq=31677 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20224 bytes_read=64175 bytes_retransmit=0 bytes_invalid=0 send_seq=3345 receive_seq=3345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.133 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.87 cputime=322.185 memavail=696672 print_time=3597.693 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.313
probe at 116.000,75.250 is z=6.560375
Stats 3597.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=609653 bytes_read=1171226 bytes_retransmit=0 bytes_invalid=0 send_seq=31744 receive_seq=31744 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20230 bytes_read=64204 bytes_retransmit=0 bytes_invalid=0 send_seq=3346 receive_seq=3346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999260 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.165 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.80 cputime=322.360 memavail=696672 print_time=3599.164 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.313
Stats 3598.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=610459 bytes_read=1171802 bytes_retransmit=0 bytes_invalid=0 send_seq=31775 receive_seq=31775 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20236 bytes_read=64220 bytes_retransmit=0 bytes_invalid=0 send_seq=3347 receive_seq=3347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999232 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.100 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.80 cputime=322.484 memavail=696680 print_time=3599.714 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.382
probe at 116.000,75.250 is z=6.561000
Z-CALIBRATION: ENDSTOP=-0.369 NOZZLE=-0.370 SWITCH=6.404 PROBE=6.561 --> OFFSET=-0.732750
Docking Probe
Stats 3599.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=612331 bytes_read=1172732 bytes_retransmit=0 bytes_invalid=0 send_seq=31836 receive_seq=31836 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20242 bytes_read=64236 bytes_retransmit=0 bytes_invalid=0 send_seq=3348 receive_seq=3348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999303 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.153 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.80 cputime=322.664 memavail=696680 print_time=3601.004 buffer_time=0.471 print_stall=0 extruder: target=220 temp=219.7 pwm=0.327
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3600.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=614452 bytes_read=1173378 bytes_retransmit=0 bytes_invalid=0 send_seq=31882 receive_seq=31882 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20248 bytes_read=64252 bytes_retransmit=0 bytes_invalid=0 send_seq=3349 receive_seq=3349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999304 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.80 cputime=322.847 memavail=696680 print_time=3603.251 buffer_time=1.717 print_stall=0 extruder: target=220 temp=219.8 pwm=0.327
Stats 3601.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=614636 bytes_read=1173805 bytes_retransmit=0 bytes_invalid=0 send_seq=31895 receive_seq=31895 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20254 bytes_read=64268 bytes_retransmit=0 bytes_invalid=0 send_seq=3350 receive_seq=3350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999314 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.130 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.80 cputime=322.947 memavail=696608 print_time=3603.251 buffer_time=0.713 print_stall=0 extruder: target=220 temp=219.9 pwm=0.327
Stats 3602.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=615311 bytes_read=1174281 bytes_retransmit=0 bytes_invalid=0 send_seq=31917 receive_seq=31917 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20260 bytes_read=64297 bytes_retransmit=0 bytes_invalid=0 send_seq=3351 receive_seq=3351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.042 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.82 cputime=323.085 memavail=696684 print_time=3604.683 buffer_time=1.145 print_stall=0 extruder: target=220 temp=220.0 pwm=0.327
Stats 3603.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=615522 bytes_read=1174756 bytes_retransmit=0 bytes_invalid=0 send_seq=31931 receive_seq=31931 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20266 bytes_read=64313 bytes_retransmit=0 bytes_invalid=0 send_seq=3352 receive_seq=3352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999290 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.82 cputime=323.203 memavail=696684 print_time=3604.683 buffer_time=0.144 print_stall=0 extruder: target=220 temp=220.1 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3604.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=616016 bytes_read=1175226 bytes_retransmit=0 bytes_invalid=0 send_seq=31949 receive_seq=31949 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20272 bytes_read=64329 bytes_retransmit=0 bytes_invalid=0 send_seq=3353 receive_seq=3353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999292 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.82 cputime=323.424 memavail=696696 print_time=3606.770 buffer_time=1.230 print_stall=0 extruder: target=220 temp=220.1 pwm=0.274
Stats 3605.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=616216 bytes_read=1175676 bytes_retransmit=0 bytes_invalid=0 send_seq=31963 receive_seq=31963 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20278 bytes_read=64345 bytes_retransmit=0 bytes_invalid=0 send_seq=3354 receive_seq=3354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999291 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.82 cputime=323.500 memavail=697096 print_time=3606.770 buffer_time=0.230 print_stall=0 extruder: target=220 temp=220.2 pwm=0.274
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Bed Mesh Calibrate
Stats 3606.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=616981 bytes_read=1176260 bytes_retransmit=0 bytes_invalid=0 send_seq=31991 receive_seq=31991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=4 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20284 bytes_read=64361 bytes_retransmit=0 bytes_invalid=0 send_seq=3355 receive_seq=3355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999287 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.82 cputime=323.811 memavail=697200 print_time=3607.684 buffer_time=0.143 print_stall=0 extruder: target=220 temp=220.1 pwm=0.274
probe: TRIGGERED
Attaching Probe
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3607.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=617692 bytes_read=1176785 bytes_retransmit=0 bytes_invalid=0 send_seq=32017 receive_seq=32017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20290 bytes_read=64390 bytes_retransmit=0 bytes_invalid=0 send_seq=3356 receive_seq=3356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999270 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.75 cputime=323.971 memavail=697200 print_time=3608.496 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.328
Stats 3608.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=618355 bytes_read=1177270 bytes_retransmit=0 bytes_invalid=0 send_seq=32038 receive_seq=32038 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20296 bytes_read=64406 bytes_retransmit=0 bytes_invalid=0 send_seq=3357 receive_seq=3357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999246 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.75 cputime=324.122 memavail=697200 print_time=3609.869 buffer_time=0.327 print_stall=0 extruder: target=220 temp=219.9 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: open
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3609.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=618566 bytes_read=1177767 bytes_retransmit=0 bytes_invalid=0 send_seq=32053 receive_seq=32053 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001306 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20302 bytes_read=64422 bytes_retransmit=0 bytes_invalid=0 send_seq=3358 receive_seq=3358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999286 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.75 cputime=324.450 memavail=697200 print_time=3610.611 buffer_time=0.068 print_stall=0 extruder: target=220 temp=219.8 pwm=0.328
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Generating new points...
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (76.0, 41.2)    | (76.0, 61.0)
  1   | (96.2, 41.2)    | (96.2, 61.0)
  2   | (116.5, 41.2)   | (116.5, 61.0)
  3   | (136.8, 41.2)   | (136.8, 61.0)
  4   | (157.0, 41.2)   | (157.0, 61.0)
  5   | (157.0, 58.5)   | (157.0, 78.2)
  6   | (136.8, 58.5)   | (136.8, 78.2)
  7   | (116.5, 58.5)   | (116.5, 78.2)
  8   | (96.2, 58.5)    | (96.2, 78.2)
  9   | (76.0, 58.5)    | (76.0, 78.2)
  10  | (76.0, 75.8)    | (76.0, 95.5)
  11  | (96.2, 75.8)    | (96.2, 95.5)
  12  | (116.5, 75.8)   | (116.5, 95.5)
  13  | (136.8, 75.8)   | (136.8, 95.5)
  14  | (157.0, 75.8)   | (157.0, 95.5)
  15  | (157.0, 93.0)   | (157.0, 112.8)
  16  | (136.8, 93.0)   | (136.8, 112.8)
  17  | (116.5, 93.0)   | (116.5, 112.8)
  18  | (96.2, 93.0)    | (96.2, 112.8)
  19  | (76.0, 93.0)    | (76.0, 112.8)
  20  | (76.0, 110.2)   | (76.0, 130.0)
  21  | (96.2, 110.2)   | (96.2, 130.0)
  22  | (116.5, 110.2)  | (116.5, 130.0)
  23  | (136.8, 110.2)  | (136.8, 130.0)
  24  | (157.0, 110.2)  | (157.0, 130.0)
bed_mesh: relative_reference_index 12 is (116.50, 95.50)
Updated Mesh Configuration:
relative_reference_index: 12
x_count: 5
y_count: 5
mesh_x_pps: 2
mesh_y_pps: 2
algo: bicubic
tension: 0.2
Stats 3610.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=620752 bytes_read=1178403 bytes_retransmit=0 bytes_invalid=0 send_seq=32101 receive_seq=32101 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20308 bytes_read=64438 bytes_retransmit=0 bytes_invalid=0 send_seq=3359 receive_seq=3359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999294 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.063 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.75 cputime=324.677 memavail=697216 print_time=3612.902 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.328
Stats 3611.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=620947 bytes_read=1178848 bytes_retransmit=0 bytes_invalid=0 send_seq=32114 receive_seq=32114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=20314 bytes_read=64454 bytes_retransmit=0 bytes_invalid=0 send_seq=3360 receive_seq=3360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999330 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.063 raspberry_pi: temp=40.8 mcu_temp: temp=37.0 chamber: temp=22.2 sysload=0.75 cputime=324.785 memavail=697216 print_time=3612.902 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.312
probe at 76.000,41.250 is z=6.569750
Stats 3612.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=622849 bytes_read=1179758 bytes_retransmit=0 bytes_invalid=0 send_seq=32174 receive_seq=32174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20320 bytes_read=64483 bytes_retransmit=0 bytes_invalid=0 send_seq=3361 receive_seq=3361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999375 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.063 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.69 cputime=324.954 memavail=697216 print_time=3613.946 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.312
mcu 'mcu': got {'#receive_time': 3612.936759663, u'clock': 0, u'can_trigger': 0, u'trigger_reason': 1, u'oid': 12, '#name': u'trsync_state', '#sent_time': 3612.935656121}
probe at 76.000,41.250 is z=6.567250
Stats 3613.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000010 mcu_task_stddev=0.000023 bytes_write=624624 bytes_read=1180557 bytes_retransmit=0 bytes_invalid=0 send_seq=32226 receive_seq=32226 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20326 bytes_read=64499 bytes_retransmit=0 bytes_invalid=0 send_seq=3362 receive_seq=3362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999404 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.099 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.69 cputime=325.103 memavail=697228 print_time=3614.725 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.312
probe at 76.000,41.250 is z=6.566625
Stats 3614.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=627180 bytes_read=1181465 bytes_retransmit=0 bytes_invalid=0 send_seq=32291 receive_seq=32291 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20332 bytes_read=64515 bytes_retransmit=0 bytes_invalid=0 send_seq=3363 receive_seq=3363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999424 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.164 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.69 cputime=325.242 memavail=697228 print_time=3615.862 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.312
probe at 96.250,41.250 is z=6.542250
Stats 3615.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=629097 bytes_read=1182356 bytes_retransmit=0 bytes_invalid=0 send_seq=32350 receive_seq=32350 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20338 bytes_read=64531 bytes_retransmit=0 bytes_invalid=0 send_seq=3364 receive_seq=3364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999407 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.69 cputime=325.395 memavail=696952 print_time=3616.916 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
probe at 96.250,41.250 is z=6.546625
Stats 3616.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=630883 bytes_read=1183150 bytes_retransmit=0 bytes_invalid=0 send_seq=32401 receive_seq=32401 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20344 bytes_read=64547 bytes_retransmit=0 bytes_invalid=0 send_seq=3365 receive_seq=3365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999387 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.176 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=0.69 cputime=325.553 memavail=696712 print_time=3617.747 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
probe at 96.250,41.250 is z=6.546000
Stats 3617.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=633408 bytes_read=1184053 bytes_retransmit=0 bytes_invalid=0 send_seq=32465 receive_seq=32465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20350 bytes_read=64576 bytes_retransmit=0 bytes_invalid=0 send_seq=3366 receive_seq=3366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999391 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.119 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.64 cputime=325.731 memavail=696728 print_time=3618.838 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
probe at 116.500,41.250 is z=6.548500
Stats 3618.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=635335 bytes_read=1184939 bytes_retransmit=0 bytes_invalid=0 send_seq=32526 receive_seq=32526 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20356 bytes_read=64592 bytes_retransmit=0 bytes_invalid=0 send_seq=3367 receive_seq=3367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999355 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.119 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=0.64 cputime=325.893 memavail=696728 print_time=3619.894 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
probe at 116.500,41.250 is z=6.548500
Stats 3619.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=637362 bytes_read=1185783 bytes_retransmit=0 bytes_invalid=0 send_seq=32584 receive_seq=32584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20362 bytes_read=64608 bytes_retransmit=0 bytes_invalid=0 send_seq=3368 receive_seq=3368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.109 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.64 cputime=326.057 memavail=696740 print_time=3620.781 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.301
probe at 116.500,41.250 is z=6.549125
Stats 3620.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=639670 bytes_read=1186661 bytes_retransmit=0 bytes_invalid=0 send_seq=32643 receive_seq=32643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20368 bytes_read=64624 bytes_retransmit=0 bytes_invalid=0 send_seq=3369 receive_seq=3369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.109 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.64 cputime=326.227 memavail=696740 print_time=3621.820 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.301
probe at 136.750,41.250 is z=6.536000
Stats 3621.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=641581 bytes_read=1187542 bytes_retransmit=0 bytes_invalid=0 send_seq=32703 receive_seq=32703 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20374 bytes_read=64640 bytes_retransmit=0 bytes_invalid=0 send_seq=3370 receive_seq=3370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999357 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.109 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.64 cputime=326.390 memavail=696740 print_time=3622.868 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.301
probe at 136.750,41.250 is z=6.537250
Stats 3622.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=643550 bytes_read=1188356 bytes_retransmit=0 bytes_invalid=0 send_seq=32758 receive_seq=32758 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20380 bytes_read=64669 bytes_retransmit=0 bytes_invalid=0 send_seq=3371 receive_seq=3371 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.59 cputime=326.535 memavail=696740 print_time=3623.766 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.301
probe at 136.750,41.250 is z=6.536000
Stats 3623.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=645922 bytes_read=1189249 bytes_retransmit=0 bytes_invalid=0 send_seq=32820 receive_seq=32820 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20386 bytes_read=64685 bytes_retransmit=0 bytes_invalid=0 send_seq=3372 receive_seq=3372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999392 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.219 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.59 cputime=326.693 memavail=696740 print_time=3624.806 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.301
probe at 157.000,41.250 is z=6.529750
Stats 3624.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=647880 bytes_read=1190140 bytes_retransmit=0 bytes_invalid=0 send_seq=32882 receive_seq=32882 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20392 bytes_read=64701 bytes_retransmit=0 bytes_invalid=0 send_seq=3373 receive_seq=3373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.59 cputime=326.858 memavail=696740 print_time=3625.854 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.327
probe at 157.000,41.250 is z=6.529750
Stats 3625.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=649951 bytes_read=1190976 bytes_retransmit=0 bytes_invalid=0 send_seq=32939 receive_seq=32939 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20398 bytes_read=64717 bytes_retransmit=0 bytes_invalid=0 send_seq=3374 receive_seq=3374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999399 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.109 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.59 cputime=326.994 memavail=697256 print_time=3626.799 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.327
probe at 157.000,41.250 is z=6.529125
Stats 3626.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=652137 bytes_read=1191828 bytes_retransmit=0 bytes_invalid=0 send_seq=32997 receive_seq=32997 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20404 bytes_read=64733 bytes_retransmit=0 bytes_invalid=0 send_seq=3375 receive_seq=3375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999406 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.59 cputime=327.128 memavail=697256 print_time=3627.792 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.327
probe at 157.000,58.500 is z=6.531000
Stats 3627.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=654073 bytes_read=1192714 bytes_retransmit=0 bytes_invalid=0 send_seq=33059 receive_seq=33059 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20410 bytes_read=64762 bytes_retransmit=0 bytes_invalid=0 send_seq=3376 receive_seq=3376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999382 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.62 cputime=327.286 memavail=697256 print_time=3628.842 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.327
probe at 157.000,58.500 is z=6.534750
Stats 3628.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=656132 bytes_read=1193543 bytes_retransmit=0 bytes_invalid=0 send_seq=33117 receive_seq=33117 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20416 bytes_read=64778 bytes_retransmit=0 bytes_invalid=0 send_seq=3377 receive_seq=3377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999441 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.62 cputime=327.440 memavail=696836 print_time=3629.775 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.308
probe at 157.000,58.500 is z=6.533500
Stats 3629.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=658426 bytes_read=1194426 bytes_retransmit=0 bytes_invalid=0 send_seq=33177 receive_seq=33177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20422 bytes_read=64794 bytes_retransmit=0 bytes_invalid=0 send_seq=3378 receive_seq=3378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999422 sd_pos=72355 heater_bed: target=60 temp=59.7 pwm=0.248 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.62 cputime=327.585 memavail=697012 print_time=3630.770 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.308
probe at 136.750,58.500 is z=6.547875
Stats 3630.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=660373 bytes_read=1195333 bytes_retransmit=0 bytes_invalid=0 send_seq=33239 receive_seq=33239 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20428 bytes_read=64810 bytes_retransmit=0 bytes_invalid=0 send_seq=3379 receive_seq=3379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999411 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.107 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.62 cputime=327.750 memavail=697012 print_time=3631.828 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.308
probe at 136.750,58.500 is z=6.546000
Stats 3631.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=662444 bytes_read=1196167 bytes_retransmit=0 bytes_invalid=0 send_seq=33298 receive_seq=33298 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20434 bytes_read=64826 bytes_retransmit=0 bytes_invalid=0 send_seq=3380 receive_seq=3380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999387 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.163 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=0.62 cputime=327.903 memavail=697012 print_time=3632.764 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.308
probe at 136.750,58.500 is z=6.546000
Stats 3632.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=664745 bytes_read=1197060 bytes_retransmit=0 bytes_invalid=0 send_seq=33360 receive_seq=33360 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20440 bytes_read=64855 bytes_retransmit=0 bytes_invalid=0 send_seq=3381 receive_seq=3381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999369 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.148 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.65 cputime=328.074 memavail=697012 print_time=3633.802 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.280
mcu 'mcu': got {'#receive_time': 3633.008247832, u'clock': 0, u'can_trigger': 0, u'trigger_reason': 1, u'oid': 12, '#name': u'trsync_state', '#sent_time': 3633.006795749}
probe at 116.500,58.500 is z=6.560375
Stats 3633.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=666638 bytes_read=1197941 bytes_retransmit=0 bytes_invalid=0 send_seq=33420 receive_seq=33420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20446 bytes_read=64871 bytes_retransmit=0 bytes_invalid=0 send_seq=3382 receive_seq=3382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999345 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.148 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.65 cputime=328.234 memavail=697012 print_time=3634.826 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.280
probe at 116.500,58.500 is z=6.560375
Stats 3634.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=668824 bytes_read=1198799 bytes_retransmit=0 bytes_invalid=0 send_seq=33481 receive_seq=33481 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20452 bytes_read=64887 bytes_retransmit=0 bytes_invalid=0 send_seq=3383 receive_seq=3383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999356 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.156 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.65 cputime=328.394 memavail=697024 print_time=3635.808 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.280
probe at 116.500,58.500 is z=6.560375
Stats 3635.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=670949 bytes_read=1199669 bytes_retransmit=0 bytes_invalid=0 send_seq=33538 receive_seq=33538 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20458 bytes_read=64903 bytes_retransmit=0 bytes_invalid=0 send_seq=3384 receive_seq=3384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999378 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.156 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.65 cputime=328.561 memavail=696724 print_time=3636.795 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.280
probe at 96.250,58.500 is z=6.537250
Stats 3636.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=672880 bytes_read=1200555 bytes_retransmit=0 bytes_invalid=0 send_seq=33599 receive_seq=33599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20464 bytes_read=64919 bytes_retransmit=0 bytes_invalid=0 send_seq=3385 receive_seq=3385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999345 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.150 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.65 cputime=328.718 memavail=696772 print_time=3637.826 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.315
probe at 96.250,58.500 is z=6.537875
Stats 3637.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=675096 bytes_read=1201408 bytes_retransmit=0 bytes_invalid=0 send_seq=33661 receive_seq=33659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20470 bytes_read=64948 bytes_retransmit=0 bytes_invalid=0 send_seq=3386 receive_seq=3386 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999340 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.68 cputime=328.879 memavail=696772 print_time=3638.812 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.315
probe at 96.250,58.500 is z=6.537875
Stats 3638.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=677255 bytes_read=1202277 bytes_retransmit=0 bytes_invalid=0 send_seq=33719 receive_seq=33719 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20476 bytes_read=64964 bytes_retransmit=0 bytes_invalid=0 send_seq=3387 receive_seq=3387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999345 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.082 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.68 cputime=329.054 memavail=696772 print_time=3639.802 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.315
probe at 76.000,58.500 is z=6.560375
Stats 3639.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=679175 bytes_read=1203163 bytes_retransmit=0 bytes_invalid=0 send_seq=33780 receive_seq=33780 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20482 bytes_read=64980 bytes_retransmit=0 bytes_invalid=0 send_seq=3388 receive_seq=3388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999351 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.68 cputime=329.212 memavail=696772 print_time=3640.832 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.373
probe at 76.000,58.500 is z=6.560375
Stats 3640.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=681346 bytes_read=1204022 bytes_retransmit=0 bytes_invalid=0 send_seq=33840 receive_seq=33838 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20488 bytes_read=64996 bytes_retransmit=0 bytes_invalid=0 send_seq=3389 receive_seq=3389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999495 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.105 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.68 cputime=329.357 memavail=696784 print_time=3641.813 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.373
probe at 76.000,58.500 is z=6.559125
Stats 3641.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=683490 bytes_read=1204891 bytes_retransmit=0 bytes_invalid=0 send_seq=33898 receive_seq=33898 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=20494 bytes_read=65012 bytes_retransmit=0 bytes_invalid=0 send_seq=3390 receive_seq=3390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999435 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.105 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.68 cputime=329.524 memavail=696784 print_time=3642.792 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.320
probe at 76.000,75.750 is z=6.580375
Stats 3642.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=685388 bytes_read=1205777 bytes_retransmit=0 bytes_invalid=0 send_seq=33959 receive_seq=33959 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20500 bytes_read=65041 bytes_retransmit=0 bytes_invalid=0 send_seq=3391 receive_seq=3391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999393 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.105 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.71 cputime=329.692 memavail=696784 print_time=3643.833 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.320
probe at 76.000,75.750 is z=6.579125
Stats 3643.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=687480 bytes_read=1206625 bytes_retransmit=0 bytes_invalid=0 send_seq=34018 receive_seq=34018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20506 bytes_read=65057 bytes_retransmit=0 bytes_invalid=0 send_seq=3392 receive_seq=3392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999373 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.105 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.71 cputime=329.854 memavail=696544 print_time=3644.766 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.257
probe at 76.000,75.750 is z=6.579750
Stats 3644.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=689726 bytes_read=1207489 bytes_retransmit=0 bytes_invalid=0 send_seq=34077 receive_seq=34077 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20518 bytes_read=65089 bytes_retransmit=0 bytes_invalid=0 send_seq=3394 receive_seq=3394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999347 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.153 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.71 cputime=330.016 memavail=696544 print_time=3645.801 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.257
probe at 96.250,75.750 is z=6.569125
Stats 3645.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=691668 bytes_read=1208391 bytes_retransmit=0 bytes_invalid=0 send_seq=34138 receive_seq=34138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20524 bytes_read=65105 bytes_retransmit=0 bytes_invalid=0 send_seq=3395 receive_seq=3395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999353 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.168 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.71 cputime=330.180 memavail=696956 print_time=3646.837 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.275
probe at 96.250,75.750 is z=6.569125
Stats 3646.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=693855 bytes_read=1209249 bytes_retransmit=0 bytes_invalid=0 send_seq=34199 receive_seq=34199 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20530 bytes_read=65121 bytes_retransmit=0 bytes_invalid=0 send_seq=3396 receive_seq=3396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999358 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.199 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.71 cputime=330.289 memavail=697048 print_time=3647.809 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.275
probe at 96.250,75.750 is z=6.569125
Stats 3647.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=695996 bytes_read=1210108 bytes_retransmit=0 bytes_invalid=0 send_seq=34257 receive_seq=34257 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20536 bytes_read=65150 bytes_retransmit=0 bytes_invalid=0 send_seq=3397 receive_seq=3397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999329 sd_pos=72355 heater_bed: target=60 temp=59.8 pwm=0.199 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.73 cputime=330.458 memavail=697048 print_time=3648.796 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.332
probe at 116.500,75.750 is z=6.558500
Stats 3648.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=697906 bytes_read=1210984 bytes_retransmit=0 bytes_invalid=0 send_seq=34316 receive_seq=34316 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20542 bytes_read=65166 bytes_retransmit=0 bytes_invalid=0 send_seq=3398 receive_seq=3398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999346 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.73 cputime=330.619 memavail=697048 print_time=3649.844 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.332
probe at 116.500,75.750 is z=6.557875
Stats 3649.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=699980 bytes_read=1211838 bytes_retransmit=0 bytes_invalid=0 send_seq=34375 receive_seq=34375 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20548 bytes_read=65182 bytes_retransmit=0 bytes_invalid=0 send_seq=3399 receive_seq=3399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999364 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.73 cputime=330.783 memavail=696728 print_time=3650.777 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.332
probe at 116.500,75.750 is z=6.558500
Stats 3650.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=702208 bytes_read=1212684 bytes_retransmit=0 bytes_invalid=0 send_seq=34434 receive_seq=34434 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20554 bytes_read=65198 bytes_retransmit=0 bytes_invalid=0 send_seq=3400 receive_seq=3400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.73 cputime=330.931 memavail=696808 print_time=3651.817 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.332
probe at 136.750,75.750 is z=6.562875
Stats 3651.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=704149 bytes_read=1213589 bytes_retransmit=0 bytes_invalid=0 send_seq=34497 receive_seq=34497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20560 bytes_read=65214 bytes_retransmit=0 bytes_invalid=0 send_seq=3401 receive_seq=3401 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999313 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.73 cputime=331.095 memavail=696808 print_time=3652.852 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.345
probe at 136.750,75.750 is z=6.564125
Stats 3652.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=706203 bytes_read=1214418 bytes_retransmit=0 bytes_invalid=0 send_seq=34555 receive_seq=34555 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20566 bytes_read=65230 bytes_retransmit=0 bytes_invalid=0 send_seq=3402 receive_seq=3402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999334 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.75 cputime=331.253 memavail=696436 print_time=3653.782 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.345
probe at 136.750,75.750 is z=6.563500
Stats 3653.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=708532 bytes_read=1215306 bytes_retransmit=0 bytes_invalid=0 send_seq=34616 receive_seq=34616 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=20572 bytes_read=65259 bytes_retransmit=0 bytes_invalid=0 send_seq=3403 receive_seq=3403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999432 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.75 cputime=331.386 memavail=696316 print_time=3654.815 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.248
probe at 157.000,75.750 is z=6.566625
Stats 3654.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=710446 bytes_read=1216187 bytes_retransmit=0 bytes_invalid=0 send_seq=34676 receive_seq=34676 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=20578 bytes_read=65275 bytes_retransmit=0 bytes_invalid=0 send_seq=3404 receive_seq=3404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999365 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.057 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.75 cputime=331.541 memavail=696316 print_time=3655.864 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.248
probe at 157.000,75.750 is z=6.568500
Stats 3655.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=712527 bytes_read=1217037 bytes_retransmit=0 bytes_invalid=0 send_seq=34735 receive_seq=34735 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=20584 bytes_read=65291 bytes_retransmit=0 bytes_invalid=0 send_seq=3405 receive_seq=3405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999299 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.75 cputime=331.685 memavail=696764 print_time=3656.795 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.248
probe at 157.000,75.750 is z=6.567250
Stats 3656.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=714741 bytes_read=1217905 bytes_retransmit=0 bytes_invalid=0 send_seq=34792 receive_seq=34792 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=20590 bytes_read=65307 bytes_retransmit=0 bytes_invalid=0 send_seq=3406 receive_seq=3406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999266 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.148 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.0 sysload=0.75 cputime=331.797 memavail=696820 print_time=3657.815 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.248
probe at 157.000,93.000 is z=6.568500
Stats 3657.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=716671 bytes_read=1218791 bytes_retransmit=0 bytes_invalid=0 send_seq=34853 receive_seq=34853 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=20596 bytes_read=65323 bytes_retransmit=0 bytes_invalid=0 send_seq=3407 receive_seq=3407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999253 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.77 cputime=331.960 memavail=696820 print_time=3658.871 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.308
probe at 157.000,93.000 is z=6.571000
Stats 3658.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=718741 bytes_read=1219625 bytes_retransmit=0 bytes_invalid=0 send_seq=34912 receive_seq=34912 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20602 bytes_read=65351 bytes_retransmit=0 bytes_invalid=0 send_seq=3408 receive_seq=3408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999264 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.77 cputime=332.115 memavail=696832 print_time=3659.800 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.372
probe at 157.000,93.000 is z=6.571625
Stats 3659.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=720937 bytes_read=1220498 bytes_retransmit=0 bytes_invalid=0 send_seq=34970 receive_seq=34970 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20608 bytes_read=65366 bytes_retransmit=0 bytes_invalid=0 send_seq=3409 receive_seq=3409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999278 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.77 cputime=332.278 memavail=696832 print_time=3660.787 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.372
probe at 136.750,93.000 is z=6.571000
Stats 3660.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=722858 bytes_read=1221390 bytes_retransmit=0 bytes_invalid=0 send_seq=35029 receive_seq=35029 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20614 bytes_read=65381 bytes_retransmit=0 bytes_invalid=0 send_seq=3410 receive_seq=3410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999263 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.77 cputime=332.434 memavail=696832 print_time=3661.879 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.372
probe at 136.750,93.000 is z=6.570375
Stats 3661.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=724937 bytes_read=1222229 bytes_retransmit=0 bytes_invalid=0 send_seq=35089 receive_seq=35089 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20620 bytes_read=65396 bytes_retransmit=0 bytes_invalid=0 send_seq=3411 receive_seq=3411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999313 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.77 cputime=332.589 memavail=696728 print_time=3662.808 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.300
probe at 136.750,93.000 is z=6.569125
Stats 3662.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=727140 bytes_read=1223102 bytes_retransmit=0 bytes_invalid=0 send_seq=35147 receive_seq=35147 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20626 bytes_read=65411 bytes_retransmit=0 bytes_invalid=0 send_seq=3412 receive_seq=3412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999305 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.79 cputime=332.754 memavail=696832 print_time=3663.794 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.300
probe at 116.500,93.000 is z=6.556000
Stats 3663.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=729098 bytes_read=1223983 bytes_retransmit=0 bytes_invalid=0 send_seq=35207 receive_seq=35207 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20632 bytes_read=65439 bytes_retransmit=0 bytes_invalid=0 send_seq=3413 receive_seq=3413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999392 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.052 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.79 cputime=332.908 memavail=696832 print_time=3664.884 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.249
probe at 116.500,93.000 is z=6.556000
Stats 3664.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=731168 bytes_read=1224817 bytes_retransmit=0 bytes_invalid=0 send_seq=35266 receive_seq=35266 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20638 bytes_read=65455 bytes_retransmit=0 bytes_invalid=0 send_seq=3414 receive_seq=3414 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999343 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=0.79 cputime=333.061 memavail=696844 print_time=3665.817 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.249
probe at 116.500,93.000 is z=6.554750
Stats 3665.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=733394 bytes_read=1225710 bytes_retransmit=0 bytes_invalid=0 send_seq=35325 receive_seq=35325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20644 bytes_read=65471 bytes_retransmit=0 bytes_invalid=0 send_seq=3415 receive_seq=3415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999342 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=0.79 cputime=333.225 memavail=696928 print_time=3666.806 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.249
probe at 96.250,93.000 is z=6.556625
Stats 3666.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=735336 bytes_read=1226596 bytes_retransmit=0 bytes_invalid=0 send_seq=35386 receive_seq=35386 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20650 bytes_read=65487 bytes_retransmit=0 bytes_invalid=0 send_seq=3416 receive_seq=3416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999713 adj=49999366 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.79 cputime=333.380 memavail=697096 print_time=3667.901 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.332
probe at 96.250,93.000 is z=6.557250
Stats 3667.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=737411 bytes_read=1227425 bytes_retransmit=0 bytes_invalid=0 send_seq=35444 receive_seq=35444 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=20656 bytes_read=65503 bytes_retransmit=0 bytes_invalid=0 send_seq=3417 receive_seq=3417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999427 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.111 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.81 cputime=333.527 memavail=697100 print_time=3668.837 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.332
probe at 96.250,93.000 is z=6.557875
Stats 3668.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=739602 bytes_read=1228298 bytes_retransmit=0 bytes_invalid=0 send_seq=35502 receive_seq=35502 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20662 bytes_read=65532 bytes_retransmit=0 bytes_invalid=0 send_seq=3418 receive_seq=3418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999712 adj=49999399 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.81 cputime=333.699 memavail=697100 print_time=3669.826 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.332
probe at 76.000,93.000 is z=6.608500
Stats 3669.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=741575 bytes_read=1229194 bytes_retransmit=0 bytes_invalid=0 send_seq=35565 receive_seq=35565 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20668 bytes_read=65548 bytes_retransmit=0 bytes_invalid=0 send_seq=3419 receive_seq=3419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999352 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.052 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.81 cputime=333.859 memavail=697100 print_time=3670.900 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.356
probe at 76.000,93.000 is z=6.611625
Stats 3670.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=743650 bytes_read=1230054 bytes_retransmit=0 bytes_invalid=0 send_seq=35623 receive_seq=35623 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20674 bytes_read=65564 bytes_retransmit=0 bytes_invalid=0 send_seq=3420 receive_seq=3420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999356 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.029 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.0 sysload=0.81 cputime=334.018 memavail=697100 print_time=3671.831 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.356
probe at 76.000,93.000 is z=6.609750
Stats 3671.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=745831 bytes_read=1230911 bytes_retransmit=0 bytes_invalid=0 send_seq=35678 receive_seq=35678 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20680 bytes_read=65580 bytes_retransmit=0 bytes_invalid=0 send_seq=3421 receive_seq=3421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999349 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.167 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.0 sysload=0.81 cputime=334.187 memavail=697100 print_time=3672.807 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.282
probe at 76.000,110.250 is z=6.579750
Stats 3672.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=747768 bytes_read=1231783 bytes_retransmit=0 bytes_invalid=0 send_seq=35739 receive_seq=35739 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20686 bytes_read=65596 bytes_retransmit=0 bytes_invalid=0 send_seq=3422 receive_seq=3422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999349 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.81 cputime=334.349 memavail=697100 print_time=3673.914 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.1 pwm=0.282
probe at 76.000,110.250 is z=6.579750
Stats 3673.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=749860 bytes_read=1232622 bytes_retransmit=0 bytes_invalid=0 send_seq=35798 receive_seq=35798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20692 bytes_read=65625 bytes_retransmit=0 bytes_invalid=0 send_seq=3423 receive_seq=3423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999331 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.130 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.82 cputime=334.491 memavail=697112 print_time=3674.847 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.229
probe at 76.000,110.250 is z=6.579750
Stats 3674.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=752065 bytes_read=1233482 bytes_retransmit=0 bytes_invalid=0 send_seq=35857 receive_seq=35857 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20698 bytes_read=65641 bytes_retransmit=0 bytes_invalid=0 send_seq=3424 receive_seq=3424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999346 sd_pos=72355 heater_bed: target=60 temp=60.2 pwm=0.043 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.82 cputime=334.642 memavail=697112 print_time=3675.833 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.229
probe at 96.250,110.250 is z=6.562875
Stats 3675.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=754023 bytes_read=1234374 bytes_retransmit=0 bytes_invalid=0 send_seq=35919 receive_seq=35919 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20704 bytes_read=65657 bytes_retransmit=0 bytes_invalid=0 send_seq=3425 receive_seq=3425 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999338 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.164 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=0.82 cputime=334.802 memavail=696836 print_time=3676.919 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.229
probe at 96.250,110.250 is z=6.565375
Stats 3676.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=756114 bytes_read=1235223 bytes_retransmit=0 bytes_invalid=0 send_seq=35978 receive_seq=35978 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20710 bytes_read=65673 bytes_retransmit=0 bytes_invalid=0 send_seq=3426 receive_seq=3426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999373 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.82 cputime=334.960 memavail=696620 print_time=3677.849 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.294
probe at 96.250,110.250 is z=6.562875
Stats 3677.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=758323 bytes_read=1236090 bytes_retransmit=0 bytes_invalid=0 send_seq=36035 receive_seq=36035 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=20716 bytes_read=65689 bytes_retransmit=0 bytes_invalid=0 send_seq=3427 receive_seq=3427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999712 adj=49999381 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.82 cputime=335.128 memavail=696620 print_time=3678.836 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.294
probe at 116.500,110.250 is z=6.562875
Stats 3678.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=760250 bytes_read=1236962 bytes_retransmit=0 bytes_invalid=0 send_seq=36096 receive_seq=36096 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20722 bytes_read=65718 bytes_retransmit=0 bytes_invalid=0 send_seq=3428 receive_seq=3428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999415 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.84 cputime=335.286 memavail=696620 print_time=3679.930 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.8 pwm=0.383
probe at 116.500,110.250 is z=6.566000
Stats 3679.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=762215 bytes_read=1237796 bytes_retransmit=0 bytes_invalid=0 send_seq=36152 receive_seq=36152 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20728 bytes_read=65734 bytes_retransmit=0 bytes_invalid=0 send_seq=3429 receive_seq=3429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999437 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.84 cputime=335.437 memavail=696516 print_time=3680.812 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.383
probe at 116.500,110.250 is z=6.564750
Stats 3680.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=764551 bytes_read=1238688 bytes_retransmit=0 bytes_invalid=0 send_seq=36211 receive_seq=36211 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20734 bytes_read=65750 bytes_retransmit=0 bytes_invalid=0 send_seq=3430 receive_seq=3430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999468 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=0.84 cputime=335.602 memavail=696620 print_time=3681.850 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.6 pwm=0.383
probe at 136.750,110.250 is z=6.558500
Stats 3681.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=766467 bytes_read=1239560 bytes_retransmit=0 bytes_invalid=0 send_seq=36272 receive_seq=36272 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20740 bytes_read=65766 bytes_retransmit=0 bytes_invalid=0 send_seq=3431 receive_seq=3431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999715 adj=49999389 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=0.84 cputime=335.762 memavail=696620 print_time=3682.938 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.383
probe at 136.750,110.250 is z=6.561625
Stats 3682.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=768445 bytes_read=1240394 bytes_retransmit=0 bytes_invalid=0 send_seq=36328 receive_seq=36328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=20746 bytes_read=65782 bytes_retransmit=0 bytes_invalid=0 send_seq=3432 receive_seq=3432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999395 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.074 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.84 cputime=335.924 memavail=696632 print_time=3683.818 buffer_time=0.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.308
probe at 136.750,110.250 is z=6.563500
Stats 3683.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=770767 bytes_read=1241271 bytes_retransmit=0 bytes_invalid=0 send_seq=36387 receive_seq=36387 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20752 bytes_read=65811 bytes_retransmit=0 bytes_invalid=0 send_seq=3433 receive_seq=3433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999719 adj=49999422 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.074 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.01 cputime=336.076 memavail=696632 print_time=3684.859 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.3 pwm=0.251
probe at 157.000,110.250 is z=6.563500
Stats 3684.4: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=772730 bytes_read=1242143 bytes_retransmit=0 bytes_invalid=0 send_seq=36448 receive_seq=36448 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20758 bytes_read=65827 bytes_retransmit=0 bytes_invalid=0 send_seq=3434 receive_seq=3434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999719 adj=49999412 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.01 cputime=336.234 memavail=696632 print_time=3685.944 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.180
probe at 157.000,110.250 is z=6.562250
Stats 3685.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=774705 bytes_read=1242998 bytes_retransmit=0 bytes_invalid=0 send_seq=36505 receive_seq=36505 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20764 bytes_read=65843 bytes_retransmit=0 bytes_invalid=0 send_seq=3435 receive_seq=3435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999420 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.01 cputime=336.394 memavail=696792 print_time=3686.827 buffer_time=0.000 print_stall=0 extruder: target=220 temp=220.5 pwm=0.180
probe at 157.000,110.250 is z=6.562875
Mesh Bed Leveling Complete
save_config: set [bed_mesh default] version = 1
save_config: set [bed_mesh default] points = 
  0.008750, -0.012500, -0.010000, -0.022500, -0.028750
  0.001875, -0.020625, 0.001875, -0.012500, -0.025000
  0.021250, 0.010625, 0.000000, 0.005000, 0.008750
  0.051250, -0.001250, -0.002500, 0.011875, 0.012500
  0.021250, 0.004375, 0.006250, 0.003125, 0.004375
save_config: set [bed_mesh default] tension = 0.2
save_config: set [bed_mesh default] min_x = 76.0
save_config: set [bed_mesh default] algo = bicubic
save_config: set [bed_mesh default] y_count = 5
save_config: set [bed_mesh default] mesh_y_pps = 2
save_config: set [bed_mesh default] min_y = 61.0
save_config: set [bed_mesh default] x_count = 5
save_config: set [bed_mesh default] max_y = 130.0
save_config: set [bed_mesh default] mesh_x_pps = 2
save_config: set [bed_mesh default] max_x = 157.0
Bed Mesh state has been saved to profile [default]
for the current session.  The SAVE_CONFIG command will
update the printer config file and restart the printer.
Docking Probe
Stats 3686.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=776587 bytes_read=1243845 bytes_retransmit=0 bytes_invalid=0 send_seq=36558 receive_seq=36558 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20770 bytes_read=65859 bytes_retransmit=0 bytes_invalid=0 send_seq=3436 receive_seq=3436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999448 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.152 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.01 cputime=336.596 memavail=696896 print_time=3687.758 buffer_time=0.116 print_stall=0 extruder: target=220 temp=220.3 pwm=0.254
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
bed_mesh fade complete: Current Z: 25.0000 fade_target: 0.0000 
Stats 3687.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=778663 bytes_read=1244453 bytes_retransmit=0 bytes_invalid=0 send_seq=36605 receive_seq=36605 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20776 bytes_read=65875 bytes_retransmit=0 bytes_invalid=0 send_seq=3437 receive_seq=3437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999718 adj=49999423 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.039 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.01 cputime=336.771 memavail=696896 print_time=3689.820 buffer_time=1.178 print_stall=0 extruder: target=220 temp=220.0 pwm=0.310
Stats 3688.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=778968 bytes_read=1244913 bytes_retransmit=0 bytes_invalid=0 send_seq=36621 receive_seq=36621 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=20782 bytes_read=65904 bytes_retransmit=0 bytes_invalid=0 send_seq=3438 receive_seq=3438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=1.09 cputime=336.890 memavail=696644 print_time=3689.820 buffer_time=0.177 print_stall=0 extruder: target=220 temp=219.8 pwm=0.387
Stats 3689.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000009 mcu_task_stddev=0.000009 bytes_write=779639 bytes_read=1245426 bytes_retransmit=0 bytes_invalid=0 send_seq=36642 receive_seq=36642 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=20788 bytes_read=65920 bytes_retransmit=0 bytes_invalid=0 send_seq=3439 receive_seq=3439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999302 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.09 cputime=337.035 memavail=696644 print_time=3691.341 buffer_time=0.697 print_stall=0 extruder: target=220 temp=219.4 pwm=0.440
Stats 3690.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=780086 bytes_read=1245896 bytes_retransmit=0 bytes_invalid=0 send_seq=36660 receive_seq=36660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=20794 bytes_read=65936 bytes_retransmit=0 bytes_invalid=0 send_seq=3440 receive_seq=3440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999713 adj=49999276 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.107 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.09 cputime=337.165 memavail=696644 print_time=3692.057 buffer_time=0.413 print_stall=0 extruder: target=220 temp=219.4 pwm=0.440
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3691.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=780334 bytes_read=1246346 bytes_retransmit=0 bytes_invalid=0 send_seq=36674 receive_seq=36674 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=2 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=20800 bytes_read=65952 bytes_retransmit=0 bytes_invalid=0 send_seq=3441 receive_seq=3441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999240 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=22.3 sysload=1.09 cputime=337.381 memavail=696656 print_time=3693.435 buffer_time=0.791 print_stall=0 extruder: target=220 temp=219.6 pwm=0.373
probe: TRIGGERED
Stats 3692.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=780572 bytes_read=1246848 bytes_retransmit=0 bytes_invalid=0 send_seq=36690 receive_seq=36690 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=20806 bytes_read=65968 bytes_retransmit=0 bytes_invalid=0 send_seq=3442 receive_seq=3442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999229 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.09 cputime=337.561 memavail=696656 print_time=3693.716 buffer_time=0.070 print_stall=0 extruder: target=220 temp=220.1 pwm=0.271
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Probe already docked
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
probe: TRIGGERED
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
extruder: pressure_advance: 0.040000
pressure_advance_smooth_time: 0.040000
Stats 3693.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=781414 bytes_read=1247383 bytes_retransmit=0 bytes_invalid=0 send_seq=36718 receive_seq=36718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20812 bytes_read=65997 bytes_retransmit=0 bytes_invalid=0 send_seq=3443 receive_seq=3443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999226 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.0 chamber: temp=22.2 sysload=1.16 cputime=337.818 memavail=696656 print_time=3697.402 buffer_time=2.756 print_stall=0 extruder: target=220 temp=220.4 pwm=0.175
Stats 3694.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=784288 bytes_read=1248321 bytes_retransmit=0 bytes_invalid=0 send_seq=36786 receive_seq=36786 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=312 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20818 bytes_read=66013 bytes_retransmit=0 bytes_invalid=0 send_seq=3444 receive_seq=3444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999325 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=1.16 cputime=338.040 memavail=696660 print_time=3711.369 buffer_time=15.722 print_stall=0 extruder: target=220 temp=220.5 pwm=0.175
Stats 3695.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=784607 bytes_read=1248855 bytes_retransmit=0 bytes_invalid=0 send_seq=36801 receive_seq=36801 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=240 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20824 bytes_read=66029 bytes_retransmit=0 bytes_invalid=0 send_seq=3445 receive_seq=3445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999347 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.16 cputime=338.146 memavail=697360 print_time=3711.369 buffer_time=14.721 print_stall=0 extruder: target=220 temp=220.5 pwm=0.259
Stats 3696.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=784941 bytes_read=1249336 bytes_retransmit=0 bytes_invalid=0 send_seq=36817 receive_seq=36817 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=144 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20830 bytes_read=66045 bytes_retransmit=0 bytes_invalid=0 send_seq=3446 receive_seq=3446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999339 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.058 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.16 cputime=338.240 memavail=697420 print_time=3711.369 buffer_time=13.721 print_stall=0 extruder: target=220 temp=220.2 pwm=0.329
Stats 3697.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=785281 bytes_read=1249827 bytes_retransmit=0 bytes_invalid=0 send_seq=36834 receive_seq=36834 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=48 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=20836 bytes_read=66061 bytes_retransmit=0 bytes_invalid=0 send_seq=3447 receive_seq=3447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999326 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.185 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=1.16 cputime=338.360 memavail=696920 print_time=3711.369 buffer_time=12.720 print_stall=0 extruder: target=220 temp=219.8 pwm=0.389
Stats 3698.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=785595 bytes_read=1250345 bytes_retransmit=0 bytes_invalid=0 send_seq=36851 receive_seq=36851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=20842 bytes_read=66090 bytes_retransmit=0 bytes_invalid=0 send_seq=3448 receive_seq=3448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999314 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.185 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.2 sysload=1.31 cputime=338.486 memavail=696920 print_time=3711.369 buffer_time=11.719 print_stall=0 extruder: target=220 temp=219.6 pwm=0.389
Stats 3699.5: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000010 mcu_task_stddev=0.000019 bytes_write=785818 bytes_read=1250821 bytes_retransmit=0 bytes_invalid=0 send_seq=36866 receive_seq=36866 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=20848 bytes_read=66106 bytes_retransmit=0 bytes_invalid=0 send_seq=3449 receive_seq=3449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999306 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.31 cputime=338.606 memavail=696920 print_time=3711.369 buffer_time=10.719 print_stall=0 extruder: target=220 temp=219.4 pwm=0.389
Stats 3700.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=786109 bytes_read=1251337 bytes_retransmit=0 bytes_invalid=0 send_seq=36883 receive_seq=36883 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=20854 bytes_read=66122 bytes_retransmit=0 bytes_invalid=0 send_seq=3450 receive_seq=3450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999309 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=40.8 mcu_temp: temp=37.0 chamber: temp=22.2 sysload=1.31 cputime=338.721 memavail=697172 print_time=3711.369 buffer_time=9.718 print_stall=0 extruder: target=220 temp=219.4 pwm=0.389
Stats 3701.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=786419 bytes_read=1251882 bytes_retransmit=0 bytes_invalid=0 send_seq=36901 receive_seq=36901 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=20860 bytes_read=66138 bytes_retransmit=0 bytes_invalid=0 send_seq=3451 receive_seq=3451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999308 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.103 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.31 cputime=338.843 memavail=697172 print_time=3711.369 buffer_time=8.712 print_stall=0 extruder: target=220 temp=219.7 pwm=0.335
Stats 3702.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=786639 bytes_read=1252374 bytes_retransmit=0 bytes_invalid=0 send_seq=36917 receive_seq=36917 retransmit_seq=0 srtt=0.002 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=20866 bytes_read=66154 bytes_retransmit=0 bytes_invalid=0 send_seq=3452 receive_seq=3452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999310 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.103 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.31 cputime=338.962 memavail=697172 print_time=3711.369 buffer_time=7.711 print_stall=0 extruder: target=220 temp=219.8 pwm=0.335
Stats 3703.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=786851 bytes_read=1252879 bytes_retransmit=0 bytes_invalid=0 send_seq=36932 receive_seq=36932 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20872 bytes_read=66183 bytes_retransmit=0 bytes_invalid=0 send_seq=3453 receive_seq=3453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999306 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.103 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=1.37 cputime=339.081 memavail=696428 print_time=3711.369 buffer_time=6.710 print_stall=0 extruder: target=220 temp=220.0 pwm=0.335
Stats 3704.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=787087 bytes_read=1253405 bytes_retransmit=0 bytes_invalid=0 send_seq=36949 receive_seq=36949 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20878 bytes_read=66199 bytes_retransmit=0 bytes_invalid=0 send_seq=3454 receive_seq=3454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999308 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.103 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.37 cputime=339.199 memavail=696428 print_time=3711.369 buffer_time=5.708 print_stall=0 extruder: target=220 temp=220.1 pwm=0.260
Stats 3705.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=787315 bytes_read=1253901 bytes_retransmit=0 bytes_invalid=0 send_seq=36965 receive_seq=36965 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20884 bytes_read=66215 bytes_retransmit=0 bytes_invalid=0 send_seq=3455 receive_seq=3455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999322 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.103 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=1.37 cputime=339.315 memavail=696576 print_time=3711.369 buffer_time=4.705 print_stall=0 extruder: target=220 temp=220.0 pwm=0.351
Stats 3706.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=787561 bytes_read=1254442 bytes_retransmit=0 bytes_invalid=0 send_seq=36982 receive_seq=36982 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20890 bytes_read=66231 bytes_retransmit=0 bytes_invalid=0 send_seq=3456 receive_seq=3456 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999319 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.075 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.37 cputime=339.431 memavail=696428 print_time=3711.369 buffer_time=3.700 print_stall=0 extruder: target=220 temp=219.7 pwm=0.423
Stats 3707.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=787781 bytes_read=1254948 bytes_retransmit=0 bytes_invalid=0 send_seq=36998 receive_seq=36998 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=20902 bytes_read=66263 bytes_retransmit=0 bytes_invalid=0 send_seq=3458 receive_seq=3458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999311 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.075 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.37 cputime=339.556 memavail=696428 print_time=3711.369 buffer_time=2.698 print_stall=0 extruder: target=220 temp=219.4 pwm=0.485
Stats 3708.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=789632 bytes_read=1255554 bytes_retransmit=0 bytes_invalid=0 send_seq=37039 receive_seq=37039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=192 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20908 bytes_read=66292 bytes_retransmit=0 bytes_invalid=0 send_seq=3459 receive_seq=3459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999313 sd_pos=72355 heater_bed: target=60 temp=60.1 pwm=0.075 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=1.34 cputime=339.737 memavail=696428 print_time=3723.470 buffer_time=13.799 print_stall=0 extruder: target=220 temp=219.2 pwm=0.485
Stats 3709.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000013 bytes_write=789964 bytes_read=1256095 bytes_retransmit=0 bytes_invalid=0 send_seq=37056 receive_seq=37056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=96 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20914 bytes_read=66308 bytes_retransmit=0 bytes_invalid=0 send_seq=3460 receive_seq=3460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999306 sd_pos=72355 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.34 cputime=339.838 memavail=696692 print_time=3723.470 buffer_time=12.798 print_stall=0 extruder: target=220 temp=219.1 pwm=0.485
Stats 3710.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=790301 bytes_read=1256626 bytes_retransmit=0 bytes_invalid=0 send_seq=37074 receive_seq=37074 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20920 bytes_read=66324 bytes_retransmit=0 bytes_invalid=0 send_seq=3461 receive_seq=3461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999312 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=1.34 cputime=339.955 memavail=696692 print_time=3723.470 buffer_time=11.798 print_stall=0 extruder: target=220 temp=219.2 pwm=0.485
Stats 3711.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=790524 bytes_read=1257102 bytes_retransmit=0 bytes_invalid=0 send_seq=37089 receive_seq=37089 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20926 bytes_read=66340 bytes_retransmit=0 bytes_invalid=0 send_seq=3462 receive_seq=3462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999300 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=1.34 cputime=340.076 memavail=696692 print_time=3723.470 buffer_time=10.797 print_stall=0 extruder: target=220 temp=219.5 pwm=0.403
Stats 3712.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=790829 bytes_read=1257664 bytes_retransmit=0 bytes_invalid=0 send_seq=37108 receive_seq=37108 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20932 bytes_read=66356 bytes_retransmit=0 bytes_invalid=0 send_seq=3463 receive_seq=3463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999313 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.34 cputime=340.196 memavail=696704 print_time=3723.470 buffer_time=9.796 print_stall=0 extruder: target=220 temp=219.8 pwm=0.312
Stats 3713.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=791057 bytes_read=1258159 bytes_retransmit=0 bytes_invalid=0 send_seq=37124 receive_seq=37124 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20938 bytes_read=66385 bytes_retransmit=0 bytes_invalid=0 send_seq=3464 receive_seq=3464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999322 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.39 cputime=340.314 memavail=696704 print_time=3723.470 buffer_time=8.795 print_stall=0 extruder: target=220 temp=220.2 pwm=0.312
Stats 3714.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=791277 bytes_read=1258651 bytes_retransmit=0 bytes_invalid=0 send_seq=37140 receive_seq=37140 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20944 bytes_read=66401 bytes_retransmit=0 bytes_invalid=0 send_seq=3465 receive_seq=3465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999321 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=1.39 cputime=340.430 memavail=696704 print_time=3723.470 buffer_time=7.795 print_stall=0 extruder: target=220 temp=220.2 pwm=0.312
Stats 3715.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=791497 bytes_read=1259202 bytes_retransmit=0 bytes_invalid=0 send_seq=37156 receive_seq=37156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20950 bytes_read=66417 bytes_retransmit=0 bytes_invalid=0 send_seq=3466 receive_seq=3466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999320 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.1 sysload=1.39 cputime=340.552 memavail=696916 print_time=3723.470 buffer_time=6.794 print_stall=0 extruder: target=220 temp=220.3 pwm=0.312
Stats 3716.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=791728 bytes_read=1259703 bytes_retransmit=0 bytes_invalid=0 send_seq=37172 receive_seq=37171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20956 bytes_read=66433 bytes_retransmit=0 bytes_invalid=0 send_seq=3467 receive_seq=3467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999323 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.39 cputime=340.672 memavail=696960 print_time=3723.470 buffer_time=5.793 print_stall=0 extruder: target=220 temp=220.0 pwm=0.432
Stats 3717.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=791940 bytes_read=1260184 bytes_retransmit=0 bytes_invalid=0 send_seq=37187 receive_seq=37187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=20962 bytes_read=66449 bytes_retransmit=0 bytes_invalid=0 send_seq=3468 receive_seq=3468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999338 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=1.39 cputime=340.792 memavail=696960 print_time=3723.470 buffer_time=4.792 print_stall=0 extruder: target=220 temp=219.7 pwm=0.432
Stats 3718.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=792192 bytes_read=1260730 bytes_retransmit=0 bytes_invalid=0 send_seq=37205 receive_seq=37205 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20968 bytes_read=66478 bytes_retransmit=0 bytes_invalid=0 send_seq=3469 receive_seq=3469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999335 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.28 cputime=340.917 memavail=696720 print_time=3723.470 buffer_time=3.792 print_stall=0 extruder: target=220 temp=219.5 pwm=0.488
Stats 3719.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=792412 bytes_read=1261236 bytes_retransmit=0 bytes_invalid=0 send_seq=37221 receive_seq=37221 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20974 bytes_read=66494 bytes_retransmit=0 bytes_invalid=0 send_seq=3470 receive_seq=3470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999337 sd_pos=72355 heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.28 cputime=341.034 memavail=696720 print_time=3723.470 buffer_time=2.791 print_stall=0 extruder: target=220 temp=219.4 pwm=0.488
Stats 3720.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=793947 bytes_read=1261837 bytes_retransmit=0 bytes_invalid=0 send_seq=37258 receive_seq=37258 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20980 bytes_read=66510 bytes_retransmit=0 bytes_invalid=0 send_seq=3471 receive_seq=3471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999345 sd_pos=72653 heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.1 sysload=1.28 cputime=341.191 memavail=696720 print_time=3724.127 buffer_time=2.447 print_stall=0 extruder: target=220 temp=219.4 pwm=0.488
Stats 3721.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=795845 bytes_read=1262497 bytes_retransmit=0 bytes_invalid=0 send_seq=37303 receive_seq=37302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20986 bytes_read=66526 bytes_retransmit=0 bytes_invalid=0 send_seq=3472 receive_seq=3472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999337 sd_pos=72702 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=1.28 cputime=341.340 memavail=696972 print_time=3724.777 buffer_time=2.097 print_stall=0 extruder: target=220 temp=219.7 pwm=0.413
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3722.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=798783 bytes_read=1263228 bytes_retransmit=0 bytes_invalid=0 send_seq=37364 receive_seq=37364 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=20992 bytes_read=66542 bytes_retransmit=0 bytes_invalid=0 send_seq=3473 receive_seq=3473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999333 sd_pos=72894 heater_bed: target=60 temp=60.0 pwm=0.072 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.28 cputime=341.527 memavail=696972 print_time=3725.741 buffer_time=2.060 print_stall=0 extruder: target=220 temp=220.0 pwm=0.355
Stats 3723.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=799553 bytes_read=1263749 bytes_retransmit=0 bytes_invalid=0 send_seq=37388 receive_seq=37388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=20998 bytes_read=66571 bytes_retransmit=0 bytes_invalid=0 send_seq=3474 receive_seq=3474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999323 sd_pos=73005 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.1 sysload=1.18 cputime=341.656 memavail=696972 print_time=3727.193 buffer_time=2.511 print_stall=0 extruder: target=220 temp=220.1 pwm=0.355
Stats 3724.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=800371 bytes_read=1264329 bytes_retransmit=0 bytes_invalid=0 send_seq=37415 receive_seq=37415 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=21004 bytes_read=66587 bytes_retransmit=0 bytes_invalid=0 send_seq=3475 receive_seq=3475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999322 sd_pos=73142 heater_bed: target=60 temp=60.0 pwm=0.094 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=1.18 cputime=341.786 memavail=696984 print_time=3727.892 buffer_time=2.209 print_stall=0 extruder: target=220 temp=220.4 pwm=0.291
Stats 3725.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=801399 bytes_read=1264904 bytes_retransmit=0 bytes_invalid=0 send_seq=37444 receive_seq=37444 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=21010 bytes_read=66603 bytes_retransmit=0 bytes_invalid=0 send_seq=3476 receive_seq=3476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999324 sd_pos=73363 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=1.18 cputime=341.921 memavail=697212 print_time=3728.917 buffer_time=2.233 print_stall=0 extruder: target=220 temp=220.3 pwm=0.350
Stats 3726.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=802400 bytes_read=1265440 bytes_retransmit=0 bytes_invalid=0 send_seq=37471 receive_seq=37471 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=21016 bytes_read=66619 bytes_retransmit=0 bytes_invalid=0 send_seq=3477 receive_seq=3477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999317 sd_pos=73593 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=1.18 cputime=342.049 memavail=697236 print_time=3730.019 buffer_time=2.335 print_stall=0 extruder: target=220 temp=220.2 pwm=0.350
Stats 3727.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=803052 bytes_read=1265990 bytes_retransmit=0 bytes_invalid=0 send_seq=37492 receive_seq=37492 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=21022 bytes_read=66635 bytes_retransmit=0 bytes_invalid=0 send_seq=3478 receive_seq=3478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999315 sd_pos=73738 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.1 sysload=1.18 cputime=342.179 memavail=697248 print_time=3730.787 buffer_time=2.103 print_stall=0 extruder: target=220 temp=220.2 pwm=0.350
Stats 3728.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=803543 bytes_read=1266505 bytes_retransmit=0 bytes_invalid=0 send_seq=37512 receive_seq=37512 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21028 bytes_read=66664 bytes_retransmit=0 bytes_invalid=0 send_seq=3479 receive_seq=3479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999313 sd_pos=73794 heater_bed: target=60 temp=60.1 pwm=0.077 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.08 cputime=342.306 memavail=697248 print_time=3731.855 buffer_time=2.171 print_stall=0 extruder: target=220 temp=220.1 pwm=0.350
Stats 3729.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=804753 bytes_read=1267066 bytes_retransmit=0 bytes_invalid=0 send_seq=37544 receive_seq=37544 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21034 bytes_read=66680 bytes_retransmit=0 bytes_invalid=0 send_seq=3480 receive_seq=3480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999310 sd_pos=74013 heater_bed: target=60 temp=60.1 pwm=0.069 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.08 cputime=342.442 memavail=697248 print_time=3732.998 buffer_time=2.313 print_stall=0 extruder: target=220 temp=220.1 pwm=0.387
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3730.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=805483 bytes_read=1267641 bytes_retransmit=0 bytes_invalid=0 send_seq=37567 receive_seq=37567 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21040 bytes_read=66696 bytes_retransmit=0 bytes_invalid=0 send_seq=3481 receive_seq=3481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999313 sd_pos=74177 heater_bed: target=60 temp=60.1 pwm=0.069 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=22.1 sysload=1.08 cputime=342.705 memavail=696744 print_time=3733.870 buffer_time=2.185 print_stall=0 extruder: target=220 temp=220.1 pwm=0.387
Stats 3731.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=806701 bytes_read=1268216 bytes_retransmit=0 bytes_invalid=0 send_seq=37599 receive_seq=37599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21046 bytes_read=66712 bytes_retransmit=0 bytes_invalid=0 send_seq=3482 receive_seq=3482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999305 sd_pos=74337 heater_bed: target=60 temp=60.1 pwm=0.068 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.2 sysload=1.08 cputime=342.829 memavail=696744 print_time=3734.686 buffer_time=1.999 print_stall=0 extruder: target=220 temp=220.2 pwm=0.387
Stats 3732.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=807394 bytes_read=1268758 bytes_retransmit=0 bytes_invalid=0 send_seq=37625 receive_seq=37625 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21052 bytes_read=66728 bytes_retransmit=0 bytes_invalid=0 send_seq=3483 receive_seq=3483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999319 sd_pos=74449 heater_bed: target=60 temp=60.1 pwm=0.065 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=1.08 cputime=342.962 memavail=696744 print_time=3735.895 buffer_time=2.208 print_stall=0 extruder: target=220 temp=220.3 pwm=0.325
Stats 3733.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=808200 bytes_read=1269318 bytes_retransmit=0 bytes_invalid=0 send_seq=37648 receive_seq=37648 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21058 bytes_read=66757 bytes_retransmit=0 bytes_invalid=0 send_seq=3484 receive_seq=3484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999316 sd_pos=74639 heater_bed: target=60 temp=60.1 pwm=0.115 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=0.99 cputime=343.088 memavail=697008 print_time=3736.710 buffer_time=2.022 print_stall=0 extruder: target=220 temp=220.4 pwm=0.325
Stats 3734.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=809433 bytes_read=1269888 bytes_retransmit=0 bytes_invalid=0 send_seq=37679 receive_seq=37679 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21064 bytes_read=66773 bytes_retransmit=0 bytes_invalid=0 send_seq=3485 receive_seq=3485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999310 sd_pos=74894 heater_bed: target=60 temp=60.1 pwm=0.117 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=0.99 cputime=343.230 memavail=697008 print_time=3738.057 buffer_time=2.368 print_stall=0 extruder: target=220 temp=220.5 pwm=0.263
Stats 3735.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=810181 bytes_read=1270424 bytes_retransmit=0 bytes_invalid=0 send_seq=37703 receive_seq=37703 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21070 bytes_read=66789 bytes_retransmit=0 bytes_invalid=0 send_seq=3486 receive_seq=3486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999313 sd_pos=75065 heater_bed: target=60 temp=60.1 pwm=0.063 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.2 sysload=0.99 cputime=343.365 memavail=696456 print_time=3738.692 buffer_time=2.003 print_stall=0 extruder: target=220 temp=220.5 pwm=0.263
Stats 3736.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=810994 bytes_read=1271010 bytes_retransmit=0 bytes_invalid=0 send_seq=37729 receive_seq=37729 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21076 bytes_read=66805 bytes_retransmit=0 bytes_invalid=0 send_seq=3487 receive_seq=3487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999322 sd_pos=75175 heater_bed: target=60 temp=60.1 pwm=0.067 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.99 cputime=343.515 memavail=696508 print_time=3740.248 buffer_time=2.558 print_stall=0 extruder: target=220 temp=220.5 pwm=0.263
Stats 3737.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=811735 bytes_read=1271545 bytes_retransmit=0 bytes_invalid=0 send_seq=37753 receive_seq=37753 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21082 bytes_read=66821 bytes_retransmit=0 bytes_invalid=0 send_seq=3488 receive_seq=3488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999328 sd_pos=75313 heater_bed: target=60 temp=60.0 pwm=0.188 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.2 sysload=0.99 cputime=343.646 memavail=696508 print_time=3740.864 buffer_time=2.172 print_stall=0 extruder: target=220 temp=220.4 pwm=0.334
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3738.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=813020 bytes_read=1272106 bytes_retransmit=0 bytes_invalid=0 send_seq=37785 receive_seq=37785 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21088 bytes_read=66850 bytes_retransmit=0 bytes_invalid=0 send_seq=3489 receive_seq=3489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999337 sd_pos=75557 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.91 cputime=343.952 memavail=696508 print_time=3742.233 buffer_time=2.541 print_stall=0 extruder: target=220 temp=220.1 pwm=0.385
Stats 3739.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=814256 bytes_read=1272711 bytes_retransmit=0 bytes_invalid=0 send_seq=37817 receive_seq=37817 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21094 bytes_read=66866 bytes_retransmit=0 bytes_invalid=0 send_seq=3490 receive_seq=3490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999339 sd_pos=75715 heater_bed: target=60 temp=59.9 pwm=0.210 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.91 cputime=344.060 memavail=696516 print_time=3743.048 buffer_time=2.355 print_stall=0 extruder: target=220 temp=219.9 pwm=0.385
Stats 3740.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=814737 bytes_read=1273236 bytes_retransmit=0 bytes_invalid=0 send_seq=37836 receive_seq=37836 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21100 bytes_read=66882 bytes_retransmit=0 bytes_invalid=0 send_seq=3491 receive_seq=3491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999340 sd_pos=75771 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.91 cputime=344.185 memavail=696516 print_time=3743.983 buffer_time=2.289 print_stall=0 extruder: target=220 temp=219.8 pwm=0.385
Stats 3741.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=815507 bytes_read=1273768 bytes_retransmit=0 bytes_invalid=0 send_seq=37860 receive_seq=37860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21106 bytes_read=66898 bytes_retransmit=0 bytes_invalid=0 send_seq=3492 receive_seq=3492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999333 sd_pos=75935 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.91 cputime=344.311 memavail=696516 print_time=3744.731 buffer_time=2.037 print_stall=0 extruder: target=220 temp=219.8 pwm=0.385
Stats 3742.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=816649 bytes_read=1274368 bytes_retransmit=0 bytes_invalid=0 send_seq=37891 receive_seq=37891 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21112 bytes_read=66914 bytes_retransmit=0 bytes_invalid=0 send_seq=3493 receive_seq=3493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999325 sd_pos=76158 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.91 cputime=344.449 memavail=696668 print_time=3745.890 buffer_time=2.194 print_stall=0 extruder: target=220 temp=220.0 pwm=0.319
Stats 3743.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=817477 bytes_read=1274903 bytes_retransmit=0 bytes_invalid=0 send_seq=37915 receive_seq=37915 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21118 bytes_read=66943 bytes_retransmit=0 bytes_invalid=0 send_seq=3494 receive_seq=3494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999316 sd_pos=76359 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.0 chamber: temp=22.2 sysload=0.84 cputime=344.574 memavail=696668 print_time=3746.749 buffer_time=2.053 print_stall=0 extruder: target=220 temp=220.2 pwm=0.319
Stats 3744.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=818422 bytes_read=1275438 bytes_retransmit=0 bytes_invalid=0 send_seq=37942 receive_seq=37942 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21124 bytes_read=66958 bytes_retransmit=0 bytes_invalid=0 send_seq=3495 receive_seq=3495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999299 sd_pos=76558 heater_bed: target=60 temp=59.8 pwm=0.195 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.84 cputime=344.717 memavail=696772 print_time=3748.569 buffer_time=2.873 print_stall=0 extruder: target=220 temp=220.3 pwm=0.252
Stats 3745.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=818856 bytes_read=1275972 bytes_retransmit=0 bytes_invalid=0 send_seq=37960 receive_seq=37960 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21130 bytes_read=66973 bytes_retransmit=0 bytes_invalid=0 send_seq=3496 receive_seq=3496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999286 sd_pos=76611 heater_bed: target=60 temp=59.8 pwm=0.195 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.84 cputime=344.850 memavail=696980 print_time=3748.882 buffer_time=2.185 print_stall=0 extruder: target=220 temp=220.4 pwm=0.252
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3746.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=820306 bytes_read=1276552 bytes_retransmit=0 bytes_invalid=0 send_seq=37994 receive_seq=37994 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001344 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21136 bytes_read=66988 bytes_retransmit=0 bytes_invalid=0 send_seq=3497 receive_seq=3497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999297 sd_pos=76938 heater_bed: target=60 temp=59.8 pwm=0.195 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.2 sysload=0.84 cputime=345.117 memavail=697032 print_time=3750.525 buffer_time=2.709 print_stall=0 extruder: target=220 temp=220.4 pwm=0.252
Stats 3747.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=821549 bytes_read=1277173 bytes_retransmit=0 bytes_invalid=0 send_seq=38027 receive_seq=38027 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21142 bytes_read=67003 bytes_retransmit=0 bytes_invalid=0 send_seq=3498 receive_seq=3498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999301 sd_pos=77073 heater_bed: target=60 temp=59.8 pwm=0.092 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.85 cputime=345.205 memavail=697032 print_time=3751.339 buffer_time=2.522 print_stall=0 extruder: target=220 temp=220.1 pwm=0.334
Stats 3748.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=822117 bytes_read=1277693 bytes_retransmit=0 bytes_invalid=0 send_seq=38048 receive_seq=38048 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21148 bytes_read=67031 bytes_retransmit=0 bytes_invalid=0 send_seq=3499 receive_seq=3499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999292 sd_pos=77129 heater_bed: target=60 temp=59.8 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.3 sysload=0.85 cputime=345.348 memavail=697036 print_time=3752.271 buffer_time=2.453 print_stall=0 extruder: target=220 temp=219.8 pwm=0.393
Stats 3749.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=822905 bytes_read=1278229 bytes_retransmit=0 bytes_invalid=0 send_seq=38072 receive_seq=38072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21154 bytes_read=67046 bytes_retransmit=0 bytes_invalid=0 send_seq=3500 receive_seq=3500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999282 sd_pos=77296 heater_bed: target=60 temp=59.8 pwm=0.135 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.85 cputime=345.480 memavail=697036 print_time=3753.010 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.6 pwm=0.393
Stats 3750.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=823886 bytes_read=1278809 bytes_retransmit=0 bytes_invalid=0 send_seq=38099 receive_seq=38099 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21160 bytes_read=67062 bytes_retransmit=0 bytes_invalid=0 send_seq=3501 receive_seq=3501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999287 sd_pos=77487 heater_bed: target=60 temp=59.8 pwm=0.135 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.3 sysload=0.85 cputime=345.626 memavail=697020 print_time=3753.933 buffer_time=2.113 print_stall=0 extruder: target=220 temp=219.6 pwm=0.393
Stats 3751.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=824959 bytes_read=1279364 bytes_retransmit=0 bytes_invalid=0 send_seq=38127 receive_seq=38127 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21166 bytes_read=67078 bytes_retransmit=0 bytes_invalid=0 send_seq=3502 receive_seq=3502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999264 sd_pos=77774 heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.85 cputime=345.779 memavail=697008 print_time=3755.272 buffer_time=2.451 print_stall=0 extruder: target=220 temp=219.7 pwm=0.393
Stats 3752.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=825689 bytes_read=1279891 bytes_retransmit=0 bytes_invalid=0 send_seq=38150 receive_seq=38150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21172 bytes_read=67094 bytes_retransmit=0 bytes_invalid=0 send_seq=3503 receive_seq=3503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999263 sd_pos=77887 heater_bed: target=60 temp=59.9 pwm=0.154 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.87 cputime=345.920 memavail=697048 print_time=3756.819 buffer_time=2.998 print_stall=0 extruder: target=220 temp=219.9 pwm=0.341
Stats 3753.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=826150 bytes_read=1280426 bytes_retransmit=0 bytes_invalid=0 send_seq=38171 receive_seq=38168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21178 bytes_read=67123 bytes_retransmit=0 bytes_invalid=0 send_seq=3504 receive_seq=3504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999313 sd_pos=77943 heater_bed: target=60 temp=60.0 pwm=0.074 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.87 cputime=346.048 memavail=696944 print_time=3757.125 buffer_time=2.300 print_stall=0 extruder: target=220 temp=220.1 pwm=0.273
Stats 3754.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=827054 bytes_read=1280981 bytes_retransmit=0 bytes_invalid=0 send_seq=38196 receive_seq=38196 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21184 bytes_read=67139 bytes_retransmit=0 bytes_invalid=0 send_seq=3505 receive_seq=3505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999298 sd_pos=78107 heater_bed: target=60 temp=60.0 pwm=0.074 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.87 cputime=346.191 memavail=697048 print_time=3757.916 buffer_time=2.090 print_stall=0 extruder: target=220 temp=220.3 pwm=0.273
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3755.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=828969 bytes_read=1281612 bytes_retransmit=0 bytes_invalid=0 send_seq=38239 receive_seq=38239 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21190 bytes_read=67155 bytes_retransmit=0 bytes_invalid=0 send_seq=3506 receive_seq=3506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999271 sd_pos=78478 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=0.87 cputime=346.402 memavail=697196 print_time=3758.970 buffer_time=2.144 print_stall=0 extruder: target=220 temp=220.4 pwm=0.273
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3756.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=832243 bytes_read=1282377 bytes_retransmit=0 bytes_invalid=0 send_seq=38303 receive_seq=38303 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21196 bytes_read=67171 bytes_retransmit=0 bytes_invalid=0 send_seq=3507 receive_seq=3507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999239 sd_pos=79216 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.3 sysload=0.87 cputime=346.600 memavail=697300 print_time=3760.023 buffer_time=2.196 print_stall=0 extruder: target=220 temp=220.2 pwm=0.327
Stats 3757.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=835184 bytes_read=1283048 bytes_retransmit=0 bytes_invalid=0 send_seq=38362 receive_seq=38352 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21202 bytes_read=67187 bytes_retransmit=0 bytes_invalid=0 send_seq=3508 receive_seq=3508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999246 sd_pos=80266 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.88 cputime=346.770 memavail=697308 print_time=3761.071 buffer_time=2.240 print_stall=0 extruder: target=220 temp=220.2 pwm=0.327
Stats 3758.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=837258 bytes_read=1283739 bytes_retransmit=0 bytes_invalid=0 send_seq=38407 receive_seq=38407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=21208 bytes_read=67216 bytes_retransmit=0 bytes_invalid=0 send_seq=3509 receive_seq=3509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999308 sd_pos=80960 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.3 sysload=0.88 cputime=346.890 memavail=697308 print_time=3761.898 buffer_time=2.068 print_stall=0 extruder: target=220 temp=220.0 pwm=0.327
Stats 3759.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=839125 bytes_read=1284388 bytes_retransmit=0 bytes_invalid=0 send_seq=38448 receive_seq=38448 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=21214 bytes_read=67232 bytes_retransmit=0 bytes_invalid=0 send_seq=3510 receive_seq=3510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999300 sd_pos=81765 heater_bed: target=60 temp=60.1 pwm=0.082 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.88 cputime=347.055 memavail=697308 print_time=3762.991 buffer_time=2.160 print_stall=0 extruder: target=220 temp=219.8 pwm=0.404
Stats 3760.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=840779 bytes_read=1284984 bytes_retransmit=0 bytes_invalid=0 send_seq=38484 receive_seq=38484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=21220 bytes_read=67248 bytes_retransmit=0 bytes_invalid=0 send_seq=3511 receive_seq=3511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999302 sd_pos=82508 heater_bed: target=60 temp=60.1 pwm=0.082 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.88 cputime=347.199 memavail=697060 print_time=3763.847 buffer_time=2.016 print_stall=0 extruder: target=220 temp=219.8 pwm=0.404
Stats 3761.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=843617 bytes_read=1285685 bytes_retransmit=0 bytes_invalid=0 send_seq=38541 receive_seq=38541 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=21226 bytes_read=67264 bytes_retransmit=0 bytes_invalid=0 send_seq=3512 receive_seq=3512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999271 sd_pos=83508 heater_bed: target=60 temp=60.1 pwm=0.082 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.88 cputime=347.332 memavail=697060 print_time=3764.912 buffer_time=2.079 print_stall=0 extruder: target=220 temp=219.8 pwm=0.346
Stats 3762.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=846445 bytes_read=1286430 bytes_retransmit=0 bytes_invalid=0 send_seq=38599 receive_seq=38599 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=21232 bytes_read=67280 bytes_retransmit=0 bytes_invalid=0 send_seq=3513 receive_seq=3513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999254 sd_pos=84255 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.89 cputime=347.460 memavail=697256 print_time=3765.962 buffer_time=2.129 print_stall=0 extruder: target=220 temp=220.0 pwm=0.284
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3763.6: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=849847 bytes_read=1287166 bytes_retransmit=0 bytes_invalid=0 send_seq=38666 receive_seq=38666 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=21238 bytes_read=67309 bytes_retransmit=0 bytes_invalid=0 send_seq=3514 receive_seq=3514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999242 sd_pos=85358 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.89 cputime=347.701 memavail=697320 print_time=3767.024 buffer_time=2.189 print_stall=0 extruder: target=220 temp=220.2 pwm=0.284
Stats 3764.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=852685 bytes_read=1287837 bytes_retransmit=0 bytes_invalid=0 send_seq=38723 receive_seq=38717 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=21244 bytes_read=67325 bytes_retransmit=0 bytes_invalid=0 send_seq=3515 receive_seq=3515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999256 sd_pos=86688 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.89 cputime=347.858 memavail=697320 print_time=3768.073 buffer_time=2.230 print_stall=0 extruder: target=220 temp=220.4 pwm=0.284
Stats 3765.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=854847 bytes_read=1288557 bytes_retransmit=0 bytes_invalid=0 send_seq=38769 receive_seq=38769 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=21250 bytes_read=67341 bytes_retransmit=0 bytes_invalid=0 send_seq=3516 receive_seq=3516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999257 sd_pos=87380 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.89 cputime=348.016 memavail=697476 print_time=3768.873 buffer_time=2.029 print_stall=0 extruder: target=220 temp=220.4 pwm=0.284
Stats 3766.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=856522 bytes_read=1289148 bytes_retransmit=0 bytes_invalid=0 send_seq=38807 receive_seq=38807 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=21256 bytes_read=67357 bytes_retransmit=0 bytes_invalid=0 send_seq=3517 receive_seq=3517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999297 sd_pos=88151 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.89 cputime=348.181 memavail=697324 print_time=3769.887 buffer_time=2.043 print_stall=0 extruder: target=220 temp=220.4 pwm=0.284
Stats 3767.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=858645 bytes_read=1289810 bytes_retransmit=0 bytes_invalid=0 send_seq=38854 receive_seq=38854 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=21262 bytes_read=67373 bytes_retransmit=0 bytes_invalid=0 send_seq=3518 receive_seq=3518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999282 sd_pos=89069 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.3 sysload=0.90 cputime=348.341 memavail=697324 print_time=3771.044 buffer_time=2.199 print_stall=0 extruder: target=220 temp=220.2 pwm=0.310
Stats 3768.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=861002 bytes_read=1290496 bytes_retransmit=0 bytes_invalid=0 send_seq=38904 receive_seq=38904 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21268 bytes_read=67402 bytes_retransmit=0 bytes_invalid=0 send_seq=3519 receive_seq=3519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999125 sd_pos=89847 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.3 sysload=0.90 cputime=348.501 memavail=697324 print_time=3771.911 buffer_time=2.065 print_stall=0 extruder: target=220 temp=220.0 pwm=0.366
Stats 3769.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=863672 bytes_read=1291159 bytes_retransmit=0 bytes_invalid=0 send_seq=38959 receive_seq=38959 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21274 bytes_read=67418 bytes_retransmit=0 bytes_invalid=0 send_seq=3520 receive_seq=3520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999188 sd_pos=90709 heater_bed: target=60 temp=60.1 pwm=0.139 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.90 cputime=348.658 memavail=697072 print_time=3772.943 buffer_time=2.097 print_stall=0 extruder: target=220 temp=219.8 pwm=0.366
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3770.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=869461 bytes_read=1292119 bytes_retransmit=0 bytes_invalid=0 send_seq=39065 receive_seq=39065 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21280 bytes_read=67434 bytes_retransmit=0 bytes_invalid=0 send_seq=3521 receive_seq=3521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999238 sd_pos=91864 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.90 cputime=348.934 memavail=697072 print_time=3774.265 buffer_time=2.418 print_stall=0 extruder: target=220 temp=219.8 pwm=0.366
Stats 3771.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=871280 bytes_read=1292779 bytes_retransmit=0 bytes_invalid=0 send_seq=39106 receive_seq=39106 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21292 bytes_read=67466 bytes_retransmit=0 bytes_invalid=0 send_seq=3523 receive_seq=3523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999261 sd_pos=92550 heater_bed: target=60 temp=60.2 pwm=0.089 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.90 cputime=349.072 memavail=696968 print_time=3775.049 buffer_time=2.202 print_stall=0 extruder: target=220 temp=219.7 pwm=0.366
Stats 3772.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=872910 bytes_read=1293386 bytes_retransmit=0 bytes_invalid=0 send_seq=39145 receive_seq=39145 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21298 bytes_read=67482 bytes_retransmit=0 bytes_invalid=0 send_seq=3524 receive_seq=3524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999448 sd_pos=93192 heater_bed: target=60 temp=60.1 pwm=0.165 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.90 cputime=349.231 memavail=697336 print_time=3775.933 buffer_time=2.085 print_stall=0 extruder: target=220 temp=219.8 pwm=0.348
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3773.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=875460 bytes_read=1294067 bytes_retransmit=0 bytes_invalid=0 send_seq=39198 receive_seq=39198 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21304 bytes_read=67498 bytes_retransmit=0 bytes_invalid=0 send_seq=3525 receive_seq=3525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999419 sd_pos=94089 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.90 cputime=349.510 memavail=695824 print_time=3777.045 buffer_time=2.196 print_stall=0 extruder: target=220 temp=219.9 pwm=0.348
Stats 3774.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=877629 bytes_read=1294721 bytes_retransmit=0 bytes_invalid=0 send_seq=39246 receive_seq=39240 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=21310 bytes_read=67527 bytes_retransmit=0 bytes_invalid=0 send_seq=3526 receive_seq=3526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999374 sd_pos=94989 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.90 cputime=349.663 memavail=695824 print_time=3778.166 buffer_time=2.313 print_stall=0 extruder: target=220 temp=220.1 pwm=0.280
Stats 3775.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=879338 bytes_read=1295353 bytes_retransmit=0 bytes_invalid=0 send_seq=39283 receive_seq=39283 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=21316 bytes_read=67543 bytes_retransmit=0 bytes_invalid=0 send_seq=3527 receive_seq=3527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999358 sd_pos=95601 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.90 cputime=349.825 memavail=696048 print_time=3778.982 buffer_time=2.129 print_stall=0 extruder: target=220 temp=220.2 pwm=0.280
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3776.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=881763 bytes_read=1296024 bytes_retransmit=0 bytes_invalid=0 send_seq=39334 receive_seq=39334 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=21322 bytes_read=67559 bytes_retransmit=0 bytes_invalid=0 send_seq=3528 receive_seq=3528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999358 sd_pos=96446 heater_bed: target=60 temp=60.2 pwm=0.071 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.2 sysload=0.90 cputime=350.116 memavail=696080 print_time=3779.894 buffer_time=2.041 print_stall=0 extruder: target=220 temp=220.2 pwm=0.280
Stats 3777.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=884051 bytes_read=1296708 bytes_retransmit=0 bytes_invalid=0 send_seq=39382 receive_seq=39382 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=21328 bytes_read=67575 bytes_retransmit=0 bytes_invalid=0 send_seq=3529 receive_seq=3529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999344 sd_pos=97284 heater_bed: target=60 temp=60.2 pwm=0.071 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.91 cputime=350.281 memavail=695504 print_time=3781.021 buffer_time=2.167 print_stall=0 extruder: target=220 temp=220.1 pwm=0.330
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3778.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=886437 bytes_read=1297315 bytes_retransmit=0 bytes_invalid=0 send_seq=39433 receive_seq=39421 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=117 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=21334 bytes_read=67591 bytes_retransmit=0 bytes_invalid=0 send_seq=3530 receive_seq=3530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999343 sd_pos=98228 heater_bed: target=60 temp=60.2 pwm=0.071 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.91 cputime=350.546 memavail=696088 print_time=3782.140 buffer_time=2.284 print_stall=0 extruder: target=220 temp=220.0 pwm=0.330
Stats 3779.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=888390 bytes_read=1297996 bytes_retransmit=0 bytes_invalid=0 send_seq=39474 receive_seq=39474 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21340 bytes_read=67620 bytes_retransmit=0 bytes_invalid=0 send_seq=3531 receive_seq=3531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999287 sd_pos=98951 heater_bed: target=60 temp=60.1 pwm=0.130 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.91 cputime=350.666 memavail=696088 print_time=3782.932 buffer_time=2.075 print_stall=0 extruder: target=220 temp=219.8 pwm=0.383
Stats 3780.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=890308 bytes_read=1298665 bytes_retransmit=0 bytes_invalid=0 send_seq=39516 receive_seq=39516 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21346 bytes_read=67636 bytes_retransmit=0 bytes_invalid=0 send_seq=3532 receive_seq=3532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999224 sd_pos=99692 heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.91 cputime=350.797 memavail=695732 print_time=3783.956 buffer_time=2.098 print_stall=0 extruder: target=220 temp=219.7 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 3781.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=896704 bytes_read=1299646 bytes_retransmit=0 bytes_invalid=0 send_seq=39632 receive_seq=39632 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21352 bytes_read=67652 bytes_retransmit=0 bytes_invalid=0 send_seq=3533 receive_seq=3533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999268 sd_pos=101039 heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.91 cputime=351.162 memavail=695840 print_time=3785.282 buffer_time=2.423 print_stall=0 extruder: target=220 temp=219.7 pwm=0.383
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3782.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=899159 bytes_read=1300331 bytes_retransmit=0 bytes_invalid=0 send_seq=39683 receive_seq=39683 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21358 bytes_read=67668 bytes_retransmit=0 bytes_invalid=0 send_seq=3534 receive_seq=3534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999479 sd_pos=101500 heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.92 cputime=351.328 memavail=695848 print_time=3785.962 buffer_time=2.103 print_stall=0 extruder: target=220 temp=219.8 pwm=0.314
Stats 3783.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=902366 bytes_read=1301087 bytes_retransmit=0 bytes_invalid=0 send_seq=39746 receive_seq=39746 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21364 bytes_read=67684 bytes_retransmit=0 bytes_invalid=0 send_seq=3535 receive_seq=3535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999467 sd_pos=102605 heater_bed: target=60 temp=60.1 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.92 cputime=351.487 memavail=695760 print_time=3786.980 buffer_time=2.120 print_stall=0 extruder: target=220 temp=219.9 pwm=0.314
Stats 3784.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=905116 bytes_read=1301768 bytes_retransmit=0 bytes_invalid=0 send_seq=39802 receive_seq=39802 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21370 bytes_read=67713 bytes_retransmit=0 bytes_invalid=0 send_seq=3536 receive_seq=3536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999447 sd_pos=103571 heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.92 cputime=351.648 memavail=695852 print_time=3788.091 buffer_time=2.231 print_stall=0 extruder: target=220 temp=220.1 pwm=0.314
Stats 3785.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=906543 bytes_read=1302384 bytes_retransmit=0 bytes_invalid=0 send_seq=39836 receive_seq=39836 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21376 bytes_read=67729 bytes_retransmit=0 bytes_invalid=0 send_seq=3537 receive_seq=3537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999416 sd_pos=104197 heater_bed: target=60 temp=60.1 pwm=0.059 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.92 cputime=351.769 memavail=696104 print_time=3788.926 buffer_time=2.065 print_stall=0 extruder: target=220 temp=220.1 pwm=0.314
Stats 3786.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=908630 bytes_read=1303039 bytes_retransmit=0 bytes_invalid=0 send_seq=39881 receive_seq=39881 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21382 bytes_read=67745 bytes_retransmit=0 bytes_invalid=0 send_seq=3538 receive_seq=3538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999331 sd_pos=105078 heater_bed: target=60 temp=60.2 pwm=0.059 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.92 cputime=351.895 memavail=696104 print_time=3789.989 buffer_time=2.127 print_stall=0 extruder: target=220 temp=220.2 pwm=0.312
Stats 3787.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=911046 bytes_read=1303695 bytes_retransmit=0 bytes_invalid=0 send_seq=39932 receive_seq=39932 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21388 bytes_read=67761 bytes_retransmit=0 bytes_invalid=0 send_seq=3539 receive_seq=3539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999330 sd_pos=105918 heater_bed: target=60 temp=60.2 pwm=0.055 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.93 cputime=352.052 memavail=696112 print_time=3791.016 buffer_time=2.153 print_stall=0 extruder: target=220 temp=220.0 pwm=0.312
Stats 3788.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=913933 bytes_read=1304415 bytes_retransmit=0 bytes_invalid=0 send_seq=39990 receive_seq=39990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21394 bytes_read=67777 bytes_retransmit=0 bytes_invalid=0 send_seq=3540 receive_seq=3540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999377 sd_pos=106842 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.93 cputime=352.217 memavail=696112 print_time=3792.172 buffer_time=2.308 print_stall=0 extruder: target=220 temp=220.1 pwm=0.312
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3789.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=917285 bytes_read=1305196 bytes_retransmit=0 bytes_invalid=0 send_seq=40058 receive_seq=40058 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21400 bytes_read=67806 bytes_retransmit=0 bytes_invalid=0 send_seq=3541 receive_seq=3541 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999396 sd_pos=107795 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.93 cputime=352.531 memavail=695660 print_time=3792.959 buffer_time=2.095 print_stall=0 extruder: target=220 temp=219.9 pwm=0.363
Stats 3790.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=920472 bytes_read=1305927 bytes_retransmit=0 bytes_invalid=0 send_seq=40121 receive_seq=40121 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21406 bytes_read=67822 bytes_retransmit=0 bytes_invalid=0 send_seq=3542 receive_seq=3542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999408 sd_pos=108894 heater_bed: target=60 temp=60.2 pwm=0.048 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.93 cputime=352.663 memavail=695864 print_time=3794.012 buffer_time=2.147 print_stall=0 extruder: target=220 temp=219.9 pwm=0.363
Stats 3791.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=923087 bytes_read=1306622 bytes_retransmit=0 bytes_invalid=0 send_seq=40174 receive_seq=40174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21412 bytes_read=67838 bytes_retransmit=0 bytes_invalid=0 send_seq=3543 receive_seq=3543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999388 sd_pos=109825 heater_bed: target=60 temp=60.1 pwm=0.048 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.93 cputime=352.824 memavail=695864 print_time=3795.089 buffer_time=2.223 print_stall=0 extruder: target=220 temp=219.8 pwm=0.363
Stats 3792.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=924877 bytes_read=1307247 bytes_retransmit=0 bytes_invalid=0 send_seq=40215 receive_seq=40215 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21418 bytes_read=67854 bytes_retransmit=0 bytes_invalid=0 send_seq=3544 receive_seq=3544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999366 sd_pos=110474 heater_bed: target=60 temp=60.2 pwm=0.062 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.93 cputime=352.981 memavail=695760 print_time=3795.928 buffer_time=2.062 print_stall=0 extruder: target=220 temp=220.0 pwm=0.363
Stats 3793.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=926878 bytes_read=1307872 bytes_retransmit=0 bytes_invalid=0 send_seq=40260 receive_seq=40260 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21424 bytes_read=67870 bytes_retransmit=0 bytes_invalid=0 send_seq=3545 receive_seq=3545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999353 sd_pos=111278 heater_bed: target=60 temp=60.2 pwm=0.062 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.93 cputime=353.110 memavail=695868 print_time=3797.075 buffer_time=2.208 print_stall=0 extruder: target=220 temp=220.2 pwm=0.266
Stats 3794.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=928941 bytes_read=1308527 bytes_retransmit=0 bytes_invalid=0 send_seq=40305 receive_seq=40305 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21430 bytes_read=67899 bytes_retransmit=0 bytes_invalid=0 send_seq=3546 receive_seq=3546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999320 sd_pos=112301 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=0.93 cputime=353.271 memavail=695868 print_time=3798.091 buffer_time=2.223 print_stall=0 extruder: target=220 temp=220.2 pwm=0.266
Stats 3795.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=931979 bytes_read=1309277 bytes_retransmit=0 bytes_invalid=0 send_seq=40366 receive_seq=40366 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21436 bytes_read=67915 bytes_retransmit=0 bytes_invalid=0 send_seq=3547 receive_seq=3547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999291 sd_pos=113205 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=0.93 cputime=353.438 memavail=695516 print_time=3798.903 buffer_time=2.035 print_stall=0 extruder: target=220 temp=220.2 pwm=0.266
Stats 3796.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=934874 bytes_read=1309973 bytes_retransmit=0 bytes_invalid=0 send_seq=40425 receive_seq=40425 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21442 bytes_read=67931 bytes_retransmit=0 bytes_invalid=0 send_seq=3548 receive_seq=3548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999277 sd_pos=114112 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.93 cputime=353.599 memavail=695876 print_time=3800.058 buffer_time=2.189 print_stall=0 extruder: target=220 temp=220.1 pwm=0.335
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3797.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=940950 bytes_read=1310948 bytes_retransmit=0 bytes_invalid=0 send_seq=40531 receive_seq=40531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21448 bytes_read=67947 bytes_retransmit=0 bytes_invalid=0 send_seq=3549 receive_seq=3549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999340 sd_pos=115071 heater_bed: target=60 temp=60.1 pwm=0.063 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.93 cputime=354.020 memavail=695960 print_time=3801.303 buffer_time=2.434 print_stall=0 extruder: target=220 temp=220.0 pwm=0.335
Stats 3798.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=942854 bytes_read=1311579 bytes_retransmit=0 bytes_invalid=0 send_seq=40572 receive_seq=40572 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21454 bytes_read=67963 bytes_retransmit=0 bytes_invalid=0 send_seq=3550 receive_seq=3550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999330 sd_pos=115344 heater_bed: target=60 temp=60.2 pwm=0.063 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=0.94 cputime=354.175 memavail=695900 print_time=3802.280 buffer_time=2.410 print_stall=0 extruder: target=220 temp=219.7 pwm=0.387
Stats 3799.7: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=943975 bytes_read=1312125 bytes_retransmit=0 bytes_invalid=0 send_seq=40601 receive_seq=40601 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21460 bytes_read=67992 bytes_retransmit=0 bytes_invalid=0 send_seq=3551 receive_seq=3551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999299 sd_pos=115455 heater_bed: target=60 temp=60.1 pwm=0.063 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.94 cputime=354.311 memavail=695868 print_time=3803.303 buffer_time=2.432 print_stall=0 extruder: target=220 temp=219.6 pwm=0.387
Stats 3800.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=944680 bytes_read=1312701 bytes_retransmit=0 bytes_invalid=0 send_seq=40624 receive_seq=40624 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21466 bytes_read=68008 bytes_retransmit=0 bytes_invalid=0 send_seq=3552 receive_seq=3552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999301 sd_pos=115508 heater_bed: target=60 temp=60.1 pwm=0.063 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.94 cputime=354.408 memavail=696008 print_time=3803.879 buffer_time=2.008 print_stall=0 extruder: target=220 temp=219.7 pwm=0.387
Stats 3801.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=945968 bytes_read=1313276 bytes_retransmit=0 bytes_invalid=0 send_seq=40656 receive_seq=40656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21472 bytes_read=68024 bytes_retransmit=0 bytes_invalid=0 send_seq=3553 receive_seq=3553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999289 sd_pos=115702 heater_bed: target=60 temp=60.2 pwm=0.079 raspberry_pi: temp=40.2 mcu_temp: temp=37.0 chamber: temp=22.6 sysload=0.94 cputime=354.549 memavail=695904 print_time=3805.167 buffer_time=2.295 print_stall=0 extruder: target=220 temp=219.8 pwm=0.387
Stats 3802.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=946831 bytes_read=1313807 bytes_retransmit=0 bytes_invalid=0 send_seq=40682 receive_seq=40682 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21478 bytes_read=68040 bytes_retransmit=0 bytes_invalid=0 send_seq=3554 receive_seq=3554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999301 sd_pos=115781 heater_bed: target=60 temp=60.1 pwm=0.079 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.94 cputime=354.677 memavail=696020 print_time=3805.873 buffer_time=2.000 print_stall=0 extruder: target=220 temp=220.0 pwm=0.327
Stats 3803.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=948177 bytes_read=1314417 bytes_retransmit=0 bytes_invalid=0 send_seq=40715 receive_seq=40715 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21484 bytes_read=68056 bytes_retransmit=0 bytes_invalid=0 send_seq=3555 receive_seq=3555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999319 sd_pos=115921 heater_bed: target=60 temp=60.1 pwm=0.099 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.02 cputime=354.812 memavail=696020 print_time=3807.397 buffer_time=2.524 print_stall=0 extruder: target=220 temp=220.1 pwm=0.276
Stats 3804.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000010 bytes_write=948969 bytes_read=1314968 bytes_retransmit=0 bytes_invalid=0 send_seq=40740 receive_seq=40740 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21490 bytes_read=68085 bytes_retransmit=0 bytes_invalid=0 send_seq=3556 receive_seq=3556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999333 sd_pos=115977 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.02 cputime=354.950 memavail=696020 print_time=3808.214 buffer_time=2.340 print_stall=0 extruder: target=220 temp=220.4 pwm=0.276
Stats 3805.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=949700 bytes_read=1315499 bytes_retransmit=0 bytes_invalid=0 send_seq=40763 receive_seq=40763 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21496 bytes_read=68101 bytes_retransmit=0 bytes_invalid=0 send_seq=3557 receive_seq=3557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999331 sd_pos=116032 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.02 cputime=355.096 memavail=696012 print_time=3809.059 buffer_time=2.185 print_stall=0 extruder: target=220 temp=220.3 pwm=0.276
Stats 3806.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=950446 bytes_read=1316059 bytes_retransmit=0 bytes_invalid=0 send_seq=40786 receive_seq=40786 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21502 bytes_read=68117 bytes_retransmit=0 bytes_invalid=0 send_seq=3558 receive_seq=3558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999336 sd_pos=116087 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.02 cputime=355.194 memavail=696036 print_time=3809.945 buffer_time=2.070 print_stall=0 extruder: target=220 temp=220.3 pwm=0.276
Stats 3807.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=951769 bytes_read=1316639 bytes_retransmit=0 bytes_invalid=0 send_seq=40819 receive_seq=40819 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21508 bytes_read=68133 bytes_retransmit=0 bytes_invalid=0 send_seq=3559 receive_seq=3559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999327 sd_pos=116225 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.02 cputime=355.338 memavail=695932 print_time=3811.782 buffer_time=2.906 print_stall=0 extruder: target=220 temp=220.1 pwm=0.331
Stats 3808.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=952571 bytes_read=1317165 bytes_retransmit=0 bytes_invalid=0 send_seq=40844 receive_seq=40844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21514 bytes_read=68149 bytes_retransmit=0 bytes_invalid=0 send_seq=3560 receive_seq=3560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999344 sd_pos=116280 heater_bed: target=60 temp=60.0 pwm=0.107 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=1.02 cputime=355.464 memavail=696040 print_time=3812.736 buffer_time=2.859 print_stall=0 extruder: target=220 temp=219.8 pwm=0.407
Stats 3809.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=953346 bytes_read=1317745 bytes_retransmit=0 bytes_invalid=0 send_seq=40869 receive_seq=40869 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21520 bytes_read=68178 bytes_retransmit=0 bytes_invalid=0 send_seq=3561 receive_seq=3561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999365 sd_pos=116335 heater_bed: target=60 temp=59.9 pwm=0.107 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.02 cputime=355.594 memavail=696040 print_time=3813.702 buffer_time=2.825 print_stall=0 extruder: target=220 temp=219.8 pwm=0.407
Stats 3810.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=954078 bytes_read=1318285 bytes_retransmit=0 bytes_invalid=0 send_seq=40891 receive_seq=40891 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21526 bytes_read=68194 bytes_retransmit=0 bytes_invalid=0 send_seq=3562 receive_seq=3562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999375 sd_pos=116388 heater_bed: target=60 temp=59.9 pwm=0.107 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.02 cputime=355.702 memavail=695644 print_time=3814.692 buffer_time=2.815 print_stall=0 extruder: target=220 temp=219.8 pwm=0.355
Stats 3811.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=954849 bytes_read=1318806 bytes_retransmit=0 bytes_invalid=0 send_seq=40915 receive_seq=40915 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21532 bytes_read=68210 bytes_retransmit=0 bytes_invalid=0 send_seq=3563 receive_seq=3563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999353 sd_pos=116443 heater_bed: target=60 temp=59.9 pwm=0.107 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.3 sysload=1.02 cputime=355.827 memavail=695796 print_time=3815.693 buffer_time=2.815 print_stall=0 extruder: target=220 temp=219.7 pwm=0.355
Stats 3812.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=955607 bytes_read=1319371 bytes_retransmit=0 bytes_invalid=0 send_seq=40939 receive_seq=40939 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21538 bytes_read=68226 bytes_retransmit=0 bytes_invalid=0 send_seq=3564 receive_seq=3564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999383 sd_pos=116499 heater_bed: target=60 temp=59.9 pwm=0.104 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.02 cputime=355.954 memavail=695796 print_time=3816.716 buffer_time=2.839 print_stall=0 extruder: target=220 temp=219.8 pwm=0.355
Stats 3813.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=956457 bytes_read=1319921 bytes_retransmit=0 bytes_invalid=0 send_seq=40966 receive_seq=40966 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=21544 bytes_read=68242 bytes_retransmit=0 bytes_invalid=0 send_seq=3565 receive_seq=3565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999346 sd_pos=116554 heater_bed: target=60 temp=59.8 pwm=0.160 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.02 cputime=356.080 memavail=695796 print_time=3817.749 buffer_time=2.870 print_stall=0 extruder: target=220 temp=220.1 pwm=0.287
Stats 3814.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=957311 bytes_read=1320447 bytes_retransmit=0 bytes_invalid=0 send_seq=40991 receive_seq=40991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21550 bytes_read=68271 bytes_retransmit=0 bytes_invalid=0 send_seq=3566 receive_seq=3566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999353 sd_pos=116610 heater_bed: target=60 temp=59.8 pwm=0.160 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.02 cputime=356.189 memavail=695800 print_time=3818.798 buffer_time=2.919 print_stall=0 extruder: target=220 temp=220.3 pwm=0.287
Stats 3815.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=958168 bytes_read=1321052 bytes_retransmit=0 bytes_invalid=0 send_seq=41018 receive_seq=41018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21556 bytes_read=68287 bytes_retransmit=0 bytes_invalid=0 send_seq=3567 receive_seq=3567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999338 sd_pos=116665 heater_bed: target=60 temp=59.8 pwm=0.174 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.02 cputime=356.311 memavail=696484 print_time=3819.858 buffer_time=2.979 print_stall=0 extruder: target=220 temp=220.1 pwm=0.287
Stats 3816.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=958972 bytes_read=1321579 bytes_retransmit=0 bytes_invalid=0 send_seq=41043 receive_seq=41043 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21562 bytes_read=68303 bytes_retransmit=0 bytes_invalid=0 send_seq=3568 receive_seq=3568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999324 sd_pos=116720 heater_bed: target=60 temp=59.8 pwm=0.168 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.02 cputime=356.420 memavail=696452 print_time=3820.934 buffer_time=3.054 print_stall=0 extruder: target=220 temp=220.0 pwm=0.347
Stats 3817.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=959288 bytes_read=1322056 bytes_retransmit=0 bytes_invalid=0 send_seq=41060 receive_seq=41060 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21568 bytes_read=68319 bytes_retransmit=0 bytes_invalid=0 send_seq=3569 receive_seq=3569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999311 sd_pos=116720 heater_bed: target=60 temp=59.9 pwm=0.101 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=1.02 cputime=356.527 memavail=696568 print_time=3820.934 buffer_time=2.054 print_stall=0 extruder: target=220 temp=219.8 pwm=0.347
Stats 3818.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=960599 bytes_read=1322666 bytes_retransmit=0 bytes_invalid=0 send_seq=41093 receive_seq=41093 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21574 bytes_read=68335 bytes_retransmit=0 bytes_invalid=0 send_seq=3570 receive_seq=3570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999304 sd_pos=116969 heater_bed: target=60 temp=59.9 pwm=0.044 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.02 cputime=356.662 memavail=696568 print_time=3822.045 buffer_time=2.163 print_stall=0 extruder: target=220 temp=219.8 pwm=0.347
Stats 3819.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=965009 bytes_read=1323481 bytes_retransmit=0 bytes_invalid=0 send_seq=41178 receive_seq=41170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=21580 bytes_read=68364 bytes_retransmit=0 bytes_invalid=0 send_seq=3571 receive_seq=3571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999305 sd_pos=117579 heater_bed: target=60 temp=59.9 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=1.02 cputime=356.828 memavail=696252 print_time=3823.202 buffer_time=2.319 print_stall=0 extruder: target=220 temp=219.6 pwm=0.405
Stats 3820.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=968594 bytes_read=1324267 bytes_retransmit=0 bytes_invalid=0 send_seq=41247 receive_seq=41247 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=21586 bytes_read=68380 bytes_retransmit=0 bytes_invalid=0 send_seq=3572 receive_seq=3572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999307 sd_pos=117993 heater_bed: target=60 temp=59.8 pwm=0.172 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.02 cputime=356.971 memavail=696316 print_time=3824.055 buffer_time=2.171 print_stall=0 extruder: target=220 temp=219.6 pwm=0.405
Stats 3821.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=971664 bytes_read=1325037 bytes_retransmit=0 bytes_invalid=0 send_seq=41310 receive_seq=41310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=21592 bytes_read=68396 bytes_retransmit=0 bytes_invalid=0 send_seq=3573 receive_seq=3573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999358 sd_pos=118331 heater_bed: target=60 temp=59.8 pwm=0.172 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=1.02 cputime=357.119 memavail=696316 print_time=3825.063 buffer_time=2.179 print_stall=0 extruder: target=220 temp=219.7 pwm=0.405
Stats 3822.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=974589 bytes_read=1325747 bytes_retransmit=0 bytes_invalid=0 send_seq=41369 receive_seq=41369 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=21598 bytes_read=68412 bytes_retransmit=0 bytes_invalid=0 send_seq=3574 receive_seq=3574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999441 sd_pos=118676 heater_bed: target=60 temp=59.8 pwm=0.172 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.02 cputime=357.257 memavail=696316 print_time=3826.228 buffer_time=2.343 print_stall=0 extruder: target=220 temp=220.0 pwm=0.349
Stats 3823.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=976303 bytes_read=1326353 bytes_retransmit=0 bytes_invalid=0 send_seq=41410 receive_seq=41410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=21604 bytes_read=68428 bytes_retransmit=0 bytes_invalid=0 send_seq=3575 receive_seq=3575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999414 sd_pos=118876 heater_bed: target=60 temp=59.8 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.94 cputime=357.390 memavail=696328 print_time=3826.956 buffer_time=2.071 print_stall=0 extruder: target=220 temp=220.2 pwm=0.289
Stats 3824.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=978419 bytes_read=1327023 bytes_retransmit=0 bytes_invalid=0 send_seq=41455 receive_seq=41455 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=21610 bytes_read=68457 bytes_retransmit=0 bytes_invalid=0 send_seq=3576 receive_seq=3576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999424 sd_pos=119077 heater_bed: target=60 temp=59.9 pwm=0.068 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.94 cputime=357.525 memavail=696328 print_time=3828.022 buffer_time=2.136 print_stall=0 extruder: target=220 temp=220.3 pwm=0.289
Stats 3825.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=980143 bytes_read=1327659 bytes_retransmit=0 bytes_invalid=0 send_seq=41496 receive_seq=41496 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=21616 bytes_read=68473 bytes_retransmit=0 bytes_invalid=0 send_seq=3577 receive_seq=3577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999387 sd_pos=119249 heater_bed: target=60 temp=59.8 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.94 cputime=357.667 memavail=696564 print_time=3828.926 buffer_time=2.039 print_stall=0 extruder: target=220 temp=220.5 pwm=0.231
Stats 3826.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=981866 bytes_read=1328257 bytes_retransmit=0 bytes_invalid=0 send_seq=41537 receive_seq=41537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=21622 bytes_read=68489 bytes_retransmit=0 bytes_invalid=0 send_seq=3578 receive_seq=3578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999392 sd_pos=119420 heater_bed: target=60 temp=59.9 pwm=0.125 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=0.94 cputime=357.781 memavail=696584 print_time=3829.890 buffer_time=2.002 print_stall=0 extruder: target=220 temp=220.3 pwm=0.287
Stats 3827.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=983565 bytes_read=1328892 bytes_retransmit=0 bytes_invalid=0 send_seq=41575 receive_seq=41575 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=21628 bytes_read=68505 bytes_retransmit=0 bytes_invalid=0 send_seq=3579 receive_seq=3579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999356 sd_pos=119588 heater_bed: target=60 temp=59.9 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.94 cputime=357.910 memavail=696584 print_time=3830.891 buffer_time=2.003 print_stall=0 extruder: target=220 temp=220.3 pwm=0.287
Stats 3828.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=985205 bytes_read=1329497 bytes_retransmit=0 bytes_invalid=0 send_seq=41613 receive_seq=41613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=21634 bytes_read=68521 bytes_retransmit=0 bytes_invalid=0 send_seq=3580 receive_seq=3580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999351 sd_pos=119760 heater_bed: target=60 temp=59.9 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.86 cputime=358.049 memavail=695936 print_time=3831.916 buffer_time=2.027 print_stall=0 extruder: target=220 temp=220.0 pwm=0.360
Stats 3829.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000011 bytes_write=986881 bytes_read=1330088 bytes_retransmit=0 bytes_invalid=0 send_seq=41651 receive_seq=41651 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21640 bytes_read=68550 bytes_retransmit=0 bytes_invalid=0 send_seq=3581 receive_seq=3581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999360 sd_pos=119932 heater_bed: target=60 temp=59.9 pwm=0.096 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.3 sysload=0.86 cputime=358.184 memavail=696088 print_time=3832.940 buffer_time=2.051 print_stall=0 extruder: target=220 temp=219.8 pwm=0.360
Stats 3830.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=988513 bytes_read=1330715 bytes_retransmit=0 bytes_invalid=0 send_seq=41688 receive_seq=41688 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21646 bytes_read=68565 bytes_retransmit=0 bytes_invalid=0 send_seq=3582 receive_seq=3582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999338 sd_pos=120104 heater_bed: target=60 temp=60.0 pwm=0.096 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.86 cputime=358.316 memavail=696088 print_time=3833.946 buffer_time=2.057 print_stall=0 extruder: target=220 temp=219.6 pwm=0.421
Stats 3831.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=990176 bytes_read=1331320 bytes_retransmit=0 bytes_invalid=0 send_seq=41726 receive_seq=41726 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21652 bytes_read=68580 bytes_retransmit=0 bytes_invalid=0 send_seq=3583 receive_seq=3583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999330 sd_pos=120278 heater_bed: target=60 temp=60.0 pwm=0.096 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.86 cputime=358.463 memavail=696284 print_time=3834.931 buffer_time=2.042 print_stall=0 extruder: target=220 temp=219.7 pwm=0.421
Stats 3832.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=991894 bytes_read=1331931 bytes_retransmit=0 bytes_invalid=0 send_seq=41766 receive_seq=41766 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21658 bytes_read=68595 bytes_retransmit=0 bytes_invalid=0 send_seq=3584 receive_seq=3584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999329 sd_pos=120452 heater_bed: target=60 temp=60.0 pwm=0.096 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.86 cputime=358.568 memavail=696344 print_time=3835.915 buffer_time=2.024 print_stall=0 extruder: target=220 temp=219.8 pwm=0.364
Stats 3833.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=993556 bytes_read=1332561 bytes_retransmit=0 bytes_invalid=0 send_seq=41805 receive_seq=41803 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21670 bytes_read=68625 bytes_retransmit=0 bytes_invalid=0 send_seq=3586 receive_seq=3586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999311 sd_pos=120624 heater_bed: target=60 temp=60.0 pwm=0.147 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.5 sysload=0.79 cputime=358.701 memavail=696344 print_time=3836.914 buffer_time=2.024 print_stall=0 extruder: target=220 temp=220.1 pwm=0.274
Stats 3834.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=995199 bytes_read=1333169 bytes_retransmit=0 bytes_invalid=0 send_seq=41843 receive_seq=41843 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21676 bytes_read=68653 bytes_retransmit=0 bytes_invalid=0 send_seq=3587 receive_seq=3587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999391 sd_pos=120796 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.79 cputime=358.838 memavail=696036 print_time=3837.971 buffer_time=2.080 print_stall=0 extruder: target=220 temp=220.3 pwm=0.274
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3835.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=998709 bytes_read=1333943 bytes_retransmit=0 bytes_invalid=0 send_seq=41911 receive_seq=41911 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21682 bytes_read=68669 bytes_retransmit=0 bytes_invalid=0 send_seq=3588 receive_seq=3588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999468 sd_pos=121078 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.79 cputime=359.120 memavail=696516 print_time=3839.263 buffer_time=2.371 print_stall=0 extruder: target=220 temp=220.5 pwm=0.213
Stats 3836.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=999537 bytes_read=1334495 bytes_retransmit=0 bytes_invalid=0 send_seq=41936 receive_seq=41936 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21688 bytes_read=68685 bytes_retransmit=0 bytes_invalid=0 send_seq=3589 receive_seq=3589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999432 sd_pos=121133 heater_bed: target=60 temp=60.0 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=0.79 cputime=359.235 memavail=696596 print_time=3839.931 buffer_time=2.039 print_stall=0 extruder: target=220 temp=220.5 pwm=0.213
Stats 3837.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1000721 bytes_read=1335070 bytes_retransmit=0 bytes_invalid=0 send_seq=41968 receive_seq=41968 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21694 bytes_read=68701 bytes_retransmit=0 bytes_invalid=0 send_seq=3590 receive_seq=3590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999718 adj=49999426 sd_pos=121245 heater_bed: target=60 temp=60.0 pwm=0.071 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.79 cputime=359.371 memavail=696396 print_time=3841.150 buffer_time=2.257 print_stall=0 extruder: target=220 temp=220.4 pwm=0.306
Stats 3838.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1001923 bytes_read=1335641 bytes_retransmit=0 bytes_invalid=0 send_seq=42000 receive_seq=42000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=21700 bytes_read=68717 bytes_retransmit=0 bytes_invalid=0 send_seq=3591 receive_seq=3591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999522 sd_pos=121356 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.89 cputime=359.509 memavail=696616 print_time=3842.321 buffer_time=2.428 print_stall=0 extruder: target=220 temp=220.1 pwm=0.358
Stats 3839.7: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1003125 bytes_read=1336241 bytes_retransmit=0 bytes_invalid=0 send_seq=42031 receive_seq=42031 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21706 bytes_read=68746 bytes_retransmit=0 bytes_invalid=0 send_seq=3592 receive_seq=3592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999462 sd_pos=121494 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.89 cputime=359.646 memavail=696608 print_time=3843.384 buffer_time=2.490 print_stall=0 extruder: target=220 temp=219.8 pwm=0.427
Stats 3840.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1004304 bytes_read=1336821 bytes_retransmit=0 bytes_invalid=0 send_seq=42063 receive_seq=42060 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21712 bytes_read=68762 bytes_retransmit=0 bytes_invalid=0 send_seq=3593 receive_seq=3593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999727 adj=49999449 sd_pos=121646 heater_bed: target=60 temp=59.9 pwm=0.161 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.89 cputime=359.789 memavail=696504 print_time=3844.383 buffer_time=2.487 print_stall=0 extruder: target=220 temp=219.6 pwm=0.427
Stats 3841.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1005592 bytes_read=1337376 bytes_retransmit=0 bytes_invalid=0 send_seq=42096 receive_seq=42096 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21718 bytes_read=68778 bytes_retransmit=0 bytes_invalid=0 send_seq=3594 receive_seq=3594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999726 adj=49999448 sd_pos=121758 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.89 cputime=359.917 memavail=696616 print_time=3845.368 buffer_time=2.472 print_stall=0 extruder: target=220 temp=219.5 pwm=0.427
Stats 3842.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1006911 bytes_read=1338009 bytes_retransmit=0 bytes_invalid=0 send_seq=42130 receive_seq=42130 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21724 bytes_read=68794 bytes_retransmit=0 bytes_invalid=0 send_seq=3595 receive_seq=3595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999728 adj=49999407 sd_pos=121870 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.89 cputime=360.056 memavail=696616 print_time=3846.351 buffer_time=2.454 print_stall=0 extruder: target=220 temp=219.7 pwm=0.367
Stats 3843.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1008114 bytes_read=1338581 bytes_retransmit=0 bytes_invalid=0 send_seq=42163 receive_seq=42163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21730 bytes_read=68810 bytes_retransmit=0 bytes_invalid=0 send_seq=3596 receive_seq=3596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999727 adj=49999419 sd_pos=121980 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.90 cputime=360.155 memavail=696616 print_time=3847.329 buffer_time=2.432 print_stall=0 extruder: target=220 temp=220.1 pwm=0.294
Stats 3844.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000010 bytes_write=1009307 bytes_read=1339137 bytes_retransmit=0 bytes_invalid=0 send_seq=42194 receive_seq=42194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21736 bytes_read=68839 bytes_retransmit=0 bytes_invalid=0 send_seq=3597 receive_seq=3597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999726 adj=49999397 sd_pos=122092 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.90 cputime=360.292 memavail=696376 print_time=3848.299 buffer_time=2.402 print_stall=0 extruder: target=220 temp=220.3 pwm=0.240
Stats 3845.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1010497 bytes_read=1339747 bytes_retransmit=0 bytes_invalid=0 send_seq=42224 receive_seq=42224 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21742 bytes_read=68855 bytes_retransmit=0 bytes_invalid=0 send_seq=3598 receive_seq=3598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999375 sd_pos=122201 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.90 cputime=360.431 memavail=696276 print_time=3849.264 buffer_time=2.366 print_stall=0 extruder: target=220 temp=220.4 pwm=0.240
Stats 3846.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1011764 bytes_read=1340322 bytes_retransmit=0 bytes_invalid=0 send_seq=42256 receive_seq=42256 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21748 bytes_read=68871 bytes_retransmit=0 bytes_invalid=0 send_seq=3599 receive_seq=3599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999348 sd_pos=122311 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.3 sysload=0.90 cputime=360.575 memavail=695996 print_time=3850.232 buffer_time=2.334 print_stall=0 extruder: target=220 temp=220.3 pwm=0.291
Stats 3847.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1012914 bytes_read=1340878 bytes_retransmit=0 bytes_invalid=0 send_seq=42287 receive_seq=42287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21754 bytes_read=68887 bytes_retransmit=0 bytes_invalid=0 send_seq=3600 receive_seq=3600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999353 sd_pos=122422 heater_bed: target=60 temp=59.8 pwm=0.173 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.90 cputime=360.707 memavail=696136 print_time=3851.213 buffer_time=2.314 print_stall=0 extruder: target=220 temp=220.1 pwm=0.345
Stats 3848.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1014160 bytes_read=1341493 bytes_retransmit=0 bytes_invalid=0 send_seq=42319 receive_seq=42319 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21760 bytes_read=68903 bytes_retransmit=0 bytes_invalid=0 send_seq=3601 receive_seq=3601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999358 sd_pos=122533 heater_bed: target=60 temp=59.8 pwm=0.173 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.2 sysload=0.83 cputime=360.847 memavail=696136 print_time=3852.214 buffer_time=2.315 print_stall=0 extruder: target=220 temp=219.8 pwm=0.397
Stats 3849.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1015376 bytes_read=1342058 bytes_retransmit=0 bytes_invalid=0 send_seq=42349 receive_seq=42349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=21766 bytes_read=68932 bytes_retransmit=0 bytes_invalid=0 send_seq=3602 receive_seq=3602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999377 sd_pos=122644 heater_bed: target=60 temp=59.8 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.83 cputime=360.984 memavail=696232 print_time=3853.241 buffer_time=2.341 print_stall=0 extruder: target=220 temp=219.6 pwm=0.397
Stats 3850.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1016614 bytes_read=1342629 bytes_retransmit=0 bytes_invalid=0 send_seq=42380 receive_seq=42380 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=21772 bytes_read=68948 bytes_retransmit=0 bytes_invalid=0 send_seq=3603 receive_seq=3603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999720 adj=49999362 sd_pos=122756 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.83 cputime=361.111 memavail=696388 print_time=3854.293 buffer_time=2.394 print_stall=0 extruder: target=220 temp=219.6 pwm=0.397
Stats 3851.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1017880 bytes_read=1343234 bytes_retransmit=0 bytes_invalid=0 send_seq=42412 receive_seq=42412 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=21778 bytes_read=68964 bytes_retransmit=0 bytes_invalid=0 send_seq=3604 receive_seq=3604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999719 adj=49999347 sd_pos=122867 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.8 mcu_temp: temp=37.1 chamber: temp=22.6 sysload=0.83 cputime=361.249 memavail=696388 print_time=3855.379 buffer_time=2.479 print_stall=0 extruder: target=220 temp=219.6 pwm=0.397
Stats 3852.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1018642 bytes_read=1343764 bytes_retransmit=0 bytes_invalid=0 send_seq=42436 receive_seq=42435 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=21784 bytes_read=68980 bytes_retransmit=0 bytes_invalid=0 send_seq=3605 receive_seq=3605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999341 sd_pos=122922 heater_bed: target=60 temp=60.0 pwm=0.066 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.83 cputime=361.375 memavail=696388 print_time=3855.939 buffer_time=2.038 print_stall=0 extruder: target=220 temp=219.8 pwm=0.326
Stats 3853.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1019864 bytes_read=1344335 bytes_retransmit=0 bytes_invalid=0 send_seq=42468 receive_seq=42467 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=21790 bytes_read=68996 bytes_retransmit=0 bytes_invalid=0 send_seq=3606 receive_seq=3606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999324 sd_pos=123033 heater_bed: target=60 temp=60.0 pwm=0.066 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.84 cputime=361.514 memavail=696660 print_time=3857.095 buffer_time=2.194 print_stall=0 extruder: target=220 temp=220.1 pwm=0.264
Stats 3854.7: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1021039 bytes_read=1344912 bytes_retransmit=0 bytes_invalid=0 send_seq=42497 receive_seq=42497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21796 bytes_read=69025 bytes_retransmit=0 bytes_invalid=0 send_seq=3607 receive_seq=3607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999725 adj=49999321 sd_pos=123142 heater_bed: target=60 temp=60.0 pwm=0.066 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.84 cputime=361.651 memavail=696652 print_time=3858.310 buffer_time=2.408 print_stall=0 extruder: target=220 temp=220.3 pwm=0.264
Stats 3855.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=1021706 bytes_read=1345452 bytes_retransmit=0 bytes_invalid=0 send_seq=42519 receive_seq=42519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21802 bytes_read=69041 bytes_retransmit=0 bytes_invalid=0 send_seq=3608 receive_seq=3608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999410 sd_pos=123198 heater_bed: target=60 temp=60.0 pwm=0.066 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.84 cputime=361.788 memavail=696020 print_time=3858.941 buffer_time=2.038 print_stall=0 extruder: target=220 temp=220.3 pwm=0.264
Stats 3856.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=1022947 bytes_read=1346036 bytes_retransmit=0 bytes_invalid=0 send_seq=42552 receive_seq=42552 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21808 bytes_read=69057 bytes_retransmit=0 bytes_invalid=0 send_seq=3609 receive_seq=3609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999720 adj=49999397 sd_pos=123310 heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.84 cputime=361.892 memavail=696152 print_time=3860.255 buffer_time=2.352 print_stall=0 extruder: target=220 temp=220.3 pwm=0.264
Stats 3857.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=1023737 bytes_read=1346583 bytes_retransmit=0 bytes_invalid=0 send_seq=42576 receive_seq=42576 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21814 bytes_read=69073 bytes_retransmit=0 bytes_invalid=0 send_seq=3610 receive_seq=3610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999352 sd_pos=123366 heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.84 cputime=361.988 memavail=696152 print_time=3860.942 buffer_time=2.038 print_stall=0 extruder: target=220 temp=220.1 pwm=0.333
Stats 3858.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=1025017 bytes_read=1347140 bytes_retransmit=0 bytes_invalid=0 send_seq=42608 receive_seq=42608 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=21820 bytes_read=69089 bytes_retransmit=0 bytes_invalid=0 send_seq=3611 receive_seq=3611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999273 sd_pos=123476 heater_bed: target=60 temp=60.0 pwm=0.078 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.85 cputime=362.098 memavail=696048 print_time=3862.367 buffer_time=2.463 print_stall=0 extruder: target=220 temp=219.8 pwm=0.419
Stats 3859.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000011 bytes_write=1025764 bytes_read=1347666 bytes_retransmit=0 bytes_invalid=0 send_seq=42632 receive_seq=42631 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21826 bytes_read=69118 bytes_retransmit=0 bytes_invalid=0 send_seq=3612 receive_seq=3612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999276 sd_pos=123532 heater_bed: target=60 temp=60.1 pwm=0.078 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.85 cputime=362.230 memavail=696168 print_time=3863.106 buffer_time=2.202 print_stall=0 extruder: target=220 temp=219.8 pwm=0.419
Stats 3860.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1027034 bytes_read=1348268 bytes_retransmit=0 bytes_invalid=0 send_seq=42663 receive_seq=42663 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21832 bytes_read=69134 bytes_retransmit=0 bytes_invalid=0 send_seq=3613 receive_seq=3613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999227 sd_pos=123640 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.4 sysload=0.85 cputime=362.366 memavail=696168 print_time=3864.637 buffer_time=2.732 print_stall=0 extruder: target=220 temp=219.6 pwm=0.419
Stats 3861.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1027828 bytes_read=1348803 bytes_retransmit=0 bytes_invalid=0 send_seq=42687 receive_seq=42687 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21838 bytes_read=69150 bytes_retransmit=0 bytes_invalid=0 send_seq=3614 receive_seq=3614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999260 sd_pos=123696 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=40.2 mcu_temp: temp=37.1 chamber: temp=22.6 sysload=0.85 cputime=362.495 memavail=696168 print_time=3865.428 buffer_time=2.522 print_stall=0 extruder: target=220 temp=219.7 pwm=0.419
Stats 3862.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1028647 bytes_read=1349329 bytes_retransmit=0 bytes_invalid=0 send_seq=42713 receive_seq=42712 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21844 bytes_read=69166 bytes_retransmit=0 bytes_invalid=0 send_seq=3615 receive_seq=3615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999229 sd_pos=123752 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.85 cputime=362.597 memavail=695928 print_time=3866.237 buffer_time=2.330 print_stall=0 extruder: target=220 temp=219.9 pwm=0.359
Stats 3863.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1029491 bytes_read=1349901 bytes_retransmit=0 bytes_invalid=0 send_seq=42739 receive_seq=42738 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21850 bytes_read=69182 bytes_retransmit=0 bytes_invalid=0 send_seq=3616 receive_seq=3616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999209 sd_pos=123808 heater_bed: target=60 temp=60.1 pwm=0.062 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.87 cputime=362.722 memavail=695928 print_time=3867.066 buffer_time=2.158 print_stall=0 extruder: target=220 temp=220.1 pwm=0.284
Stats 3864.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1030248 bytes_read=1350434 bytes_retransmit=0 bytes_invalid=0 send_seq=42763 receive_seq=42763 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=21856 bytes_read=69198 bytes_retransmit=0 bytes_invalid=0 send_seq=3617 receive_seq=3617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999216 sd_pos=123863 heater_bed: target=60 temp=60.1 pwm=0.062 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=0.87 cputime=362.852 memavail=695816 print_time=3867.912 buffer_time=2.003 print_stall=0 extruder: target=220 temp=220.4 pwm=0.222
Stats 3865.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1031614 bytes_read=1351000 bytes_retransmit=0 bytes_invalid=0 send_seq=42797 receive_seq=42797 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21862 bytes_read=69227 bytes_retransmit=0 bytes_invalid=0 send_seq=3618 receive_seq=3618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999254 sd_pos=123973 heater_bed: target=60 temp=60.1 pwm=0.062 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.87 cputime=362.971 memavail=696160 print_time=3869.663 buffer_time=2.753 print_stall=0 extruder: target=220 temp=220.5 pwm=0.222
Stats 3866.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1032421 bytes_read=1351547 bytes_retransmit=0 bytes_invalid=0 send_seq=42821 receive_seq=42821 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21868 bytes_read=69243 bytes_retransmit=0 bytes_invalid=0 send_seq=3619 receive_seq=3619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999287 sd_pos=124029 heater_bed: target=60 temp=60.1 pwm=0.113 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.87 cputime=363.071 memavail=696176 print_time=3870.568 buffer_time=2.658 print_stall=0 extruder: target=220 temp=220.4 pwm=0.304
Stats 3867.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1033226 bytes_read=1352059 bytes_retransmit=0 bytes_invalid=0 send_seq=42844 receive_seq=42844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21874 bytes_read=69259 bytes_retransmit=0 bytes_invalid=0 send_seq=3620 receive_seq=3620 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999286 sd_pos=124085 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.87 cputime=363.211 memavail=695812 print_time=3871.495 buffer_time=2.584 print_stall=0 extruder: target=220 temp=220.1 pwm=0.377
Stats 3868.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1034002 bytes_read=1352621 bytes_retransmit=0 bytes_invalid=0 send_seq=42870 receive_seq=42869 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001437 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21880 bytes_read=69275 bytes_retransmit=0 bytes_invalid=0 send_seq=3621 receive_seq=3621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999075 sd_pos=124141 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.88 cputime=363.316 memavail=695924 print_time=3872.442 buffer_time=2.530 print_stall=0 extruder: target=220 temp=219.8 pwm=0.428
Stats 3869.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1034778 bytes_read=1353198 bytes_retransmit=0 bytes_invalid=0 send_seq=42895 receive_seq=42894 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=21886 bytes_read=69291 bytes_retransmit=0 bytes_invalid=0 send_seq=3622 receive_seq=3622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49998911 sd_pos=124195 heater_bed: target=60 temp=60.0 pwm=0.181 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.88 cputime=363.443 memavail=695924 print_time=3873.408 buffer_time=2.497 print_stall=0 extruder: target=220 temp=219.6 pwm=0.428
Stats 3870.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1035621 bytes_read=1353730 bytes_retransmit=0 bytes_invalid=0 send_seq=42921 receive_seq=42921 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=21892 bytes_read=69320 bytes_retransmit=0 bytes_invalid=0 send_seq=3623 receive_seq=3623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999015 sd_pos=124251 heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.5 sysload=0.88 cputime=363.573 memavail=695924 print_time=3874.392 buffer_time=2.479 print_stall=0 extruder: target=220 temp=219.5 pwm=0.428
Stats 3871.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1036415 bytes_read=1354261 bytes_retransmit=0 bytes_invalid=0 send_seq=42947 receive_seq=42947 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=21898 bytes_read=69336 bytes_retransmit=0 bytes_invalid=0 send_seq=3624 receive_seq=3624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49998857 sd_pos=124306 heater_bed: target=60 temp=60.0 pwm=0.121 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.88 cputime=363.704 memavail=695888 print_time=3875.402 buffer_time=2.489 print_stall=0 extruder: target=220 temp=219.7 pwm=0.362
Stats 3872.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1037242 bytes_read=1354813 bytes_retransmit=0 bytes_invalid=0 send_seq=42973 receive_seq=42972 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=21904 bytes_read=69352 bytes_retransmit=0 bytes_invalid=0 send_seq=3625 receive_seq=3625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49998957 sd_pos=124362 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.88 cputime=363.834 memavail=695928 print_time=3876.424 buffer_time=2.510 print_stall=0 extruder: target=220 temp=219.9 pwm=0.296
Stats 3873.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1038150 bytes_read=1355368 bytes_retransmit=0 bytes_invalid=0 send_seq=43001 receive_seq=43000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001525 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=21910 bytes_read=69368 bytes_retransmit=0 bytes_invalid=0 send_seq=3626 receive_seq=3626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999059 sd_pos=124417 heater_bed: target=60 temp=59.9 pwm=0.122 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=0.97 cputime=363.970 memavail=695928 print_time=3877.469 buffer_time=2.552 print_stall=0 extruder: target=220 temp=220.3 pwm=0.238
Stats 3874.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1038972 bytes_read=1355919 bytes_retransmit=0 bytes_invalid=0 send_seq=43028 receive_seq=43028 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=51 freq=180001510 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=21916 bytes_read=69384 bytes_retransmit=0 bytes_invalid=0 send_seq=3627 receive_seq=3627 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49998917 sd_pos=124473 heater_bed: target=60 temp=59.9 pwm=0.137 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=0.97 cputime=364.102 memavail=695936 print_time=3878.525 buffer_time=2.607 print_stall=0 extruder: target=220 temp=220.4 pwm=0.238
Stats 3875.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1039873 bytes_read=1356504 bytes_retransmit=0 bytes_invalid=0 send_seq=43054 receive_seq=43053 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001493 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21922 bytes_read=69413 bytes_retransmit=0 bytes_invalid=0 send_seq=3628 receive_seq=3628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999033 sd_pos=124529 heater_bed: target=60 temp=59.9 pwm=0.137 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.97 cputime=364.228 memavail=696136 print_time=3879.611 buffer_time=2.693 print_stall=0 extruder: target=220 temp=220.4 pwm=0.238
Stats 3876.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1040678 bytes_read=1357044 bytes_retransmit=0 bytes_invalid=0 send_seq=43079 receive_seq=43078 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21928 bytes_read=69429 bytes_retransmit=0 bytes_invalid=0 send_seq=3629 receive_seq=3629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999122 sd_pos=124585 heater_bed: target=60 temp=60.0 pwm=0.087 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=0.97 cputime=364.358 memavail=696088 print_time=3880.705 buffer_time=2.782 print_stall=0 extruder: target=220 temp=220.2 pwm=0.309
Stats 3877.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1041570 bytes_read=1357580 bytes_retransmit=0 bytes_invalid=0 send_seq=43106 receive_seq=43105 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21934 bytes_read=69445 bytes_retransmit=0 bytes_invalid=0 send_seq=3630 receive_seq=3630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999192 sd_pos=124638 heater_bed: target=60 temp=60.0 pwm=0.087 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.97 cputime=364.467 memavail=696192 print_time=3881.839 buffer_time=2.913 print_stall=0 extruder: target=220 temp=219.9 pwm=0.407
Stats 3878.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1042479 bytes_read=1358179 bytes_retransmit=0 bytes_invalid=0 send_seq=43133 receive_seq=43133 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001454 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21940 bytes_read=69461 bytes_retransmit=0 bytes_invalid=0 send_seq=3631 receive_seq=3631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999227 sd_pos=124722 heater_bed: target=60 temp=60.0 pwm=0.092 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.97 cputime=364.605 memavail=696192 print_time=3882.990 buffer_time=3.060 print_stall=0 extruder: target=220 temp=219.6 pwm=0.407
Stats 3879.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1042793 bytes_read=1358690 bytes_retransmit=0 bytes_invalid=0 send_seq=43151 receive_seq=43150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001444 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=21946 bytes_read=69477 bytes_retransmit=0 bytes_invalid=0 send_seq=3632 receive_seq=3632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999269 sd_pos=124722 heater_bed: target=60 temp=60.0 pwm=0.092 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.97 cputime=364.729 memavail=696192 print_time=3882.990 buffer_time=2.053 print_stall=0 extruder: target=220 temp=219.5 pwm=0.407
Stats 3880.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1043623 bytes_read=1359241 bytes_retransmit=0 bytes_invalid=0 send_seq=43177 receive_seq=43177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21952 bytes_read=69506 bytes_retransmit=0 bytes_invalid=0 send_seq=3633 receive_seq=3633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999301 sd_pos=124806 heater_bed: target=60 temp=60.0 pwm=0.071 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.97 cputime=364.842 memavail=695944 print_time=3884.172 buffer_time=2.234 print_stall=0 extruder: target=220 temp=219.5 pwm=0.407
Stats 3881.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1044502 bytes_read=1359810 bytes_retransmit=0 bytes_invalid=0 send_seq=43203 receive_seq=43202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001420 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21958 bytes_read=69522 bytes_retransmit=0 bytes_invalid=0 send_seq=3634 receive_seq=3634 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999330 sd_pos=124890 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=0.97 cputime=364.975 memavail=695944 print_time=3885.398 buffer_time=2.457 print_stall=0 extruder: target=220 temp=219.7 pwm=0.362
Stats 3882.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1045325 bytes_read=1360341 bytes_retransmit=0 bytes_invalid=0 send_seq=43229 receive_seq=43228 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001415 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21964 bytes_read=69538 bytes_retransmit=0 bytes_invalid=0 send_seq=3635 receive_seq=3635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999363 sd_pos=124974 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=0.97 cputime=365.110 memavail=695840 print_time=3886.654 buffer_time=2.709 print_stall=0 extruder: target=220 temp=219.9 pwm=0.303
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 3883.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1048443 bytes_read=1361113 bytes_retransmit=0 bytes_invalid=0 send_seq=43292 receive_seq=43292 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001406 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21970 bytes_read=69554 bytes_retransmit=0 bytes_invalid=0 send_seq=3636 receive_seq=3636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999408 sd_pos=125170 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.7 sysload=1.05 cputime=365.403 memavail=695952 print_time=3888.505 buffer_time=3.560 print_stall=0 extruder: target=220 temp=220.2 pwm=0.303
Stats 3884.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1048665 bytes_read=1361644 bytes_retransmit=0 bytes_invalid=0 send_seq=43308 receive_seq=43308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001395 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=21976 bytes_read=69570 bytes_retransmit=0 bytes_invalid=0 send_seq=3637 receive_seq=3637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999389 sd_pos=125170 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.05 cputime=365.494 memavail=695952 print_time=3888.505 buffer_time=2.560 print_stall=0 extruder: target=220 temp=220.3 pwm=0.229
Stats 3885.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1049691 bytes_read=1362185 bytes_retransmit=0 bytes_invalid=0 send_seq=43337 receive_seq=43336 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21982 bytes_read=69599 bytes_retransmit=0 bytes_invalid=0 send_seq=3638 receive_seq=3638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999409 sd_pos=125225 heater_bed: target=60 temp=60.1 pwm=0.091 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.05 cputime=365.628 memavail=695652 print_time=3890.489 buffer_time=3.543 print_stall=0 extruder: target=220 temp=220.4 pwm=0.282
Stats 3886.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1049974 bytes_read=1362696 bytes_retransmit=0 bytes_invalid=0 send_seq=43355 receive_seq=43355 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21988 bytes_read=69615 bytes_retransmit=0 bytes_invalid=0 send_seq=3639 receive_seq=3639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999440 sd_pos=125225 heater_bed: target=60 temp=60.1 pwm=0.087 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.05 cputime=365.739 memavail=695712 print_time=3890.489 buffer_time=2.539 print_stall=0 extruder: target=220 temp=220.3 pwm=0.282
Stats 3887.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1050886 bytes_read=1363281 bytes_retransmit=0 bytes_invalid=0 send_seq=43384 receive_seq=43384 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=21994 bytes_read=69631 bytes_retransmit=0 bytes_invalid=0 send_seq=3640 receive_seq=3640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999439 sd_pos=125283 heater_bed: target=60 temp=60.1 pwm=0.087 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.05 cputime=365.867 memavail=695712 print_time=3892.447 buffer_time=3.497 print_stall=0 extruder: target=220 temp=219.9 pwm=0.399
Stats 3888.8: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=1051203 bytes_read=1363759 bytes_retransmit=0 bytes_invalid=0 send_seq=43402 receive_seq=43402 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22000 bytes_read=69647 bytes_retransmit=0 bytes_invalid=0 send_seq=3641 receive_seq=3641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999422 sd_pos=125283 heater_bed: target=60 temp=60.1 pwm=0.087 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.05 cputime=365.980 memavail=695712 print_time=3892.447 buffer_time=2.495 print_stall=0 extruder: target=220 temp=219.8 pwm=0.399
Stats 3889.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1052014 bytes_read=1364328 bytes_retransmit=0 bytes_invalid=0 send_seq=43427 receive_seq=43427 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22006 bytes_read=69663 bytes_retransmit=0 bytes_invalid=0 send_seq=3642 receive_seq=3642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999435 sd_pos=125338 heater_bed: target=60 temp=60.1 pwm=0.153 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.05 cputime=366.090 memavail=695964 print_time=3894.406 buffer_time=3.453 print_stall=0 extruder: target=220 temp=219.7 pwm=0.399
Stats 3890.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1052336 bytes_read=1364887 bytes_retransmit=0 bytes_invalid=0 send_seq=43448 receive_seq=43448 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22012 bytes_read=69692 bytes_retransmit=0 bytes_invalid=0 send_seq=3643 receive_seq=3643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999412 sd_pos=125338 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.05 cputime=366.214 memavail=695964 print_time=3894.406 buffer_time=2.450 print_stall=0 extruder: target=220 temp=219.7 pwm=0.399
Stats 3891.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1053368 bytes_read=1365443 bytes_retransmit=0 bytes_invalid=0 send_seq=43479 receive_seq=43479 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22018 bytes_read=69708 bytes_retransmit=0 bytes_invalid=0 send_seq=3644 receive_seq=3644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999422 sd_pos=125397 heater_bed: target=60 temp=60.1 pwm=0.098 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.05 cputime=366.346 memavail=695860 print_time=3896.371 buffer_time=3.412 print_stall=0 extruder: target=220 temp=219.8 pwm=0.341
Stats 3892.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1053624 bytes_read=1365953 bytes_retransmit=0 bytes_invalid=0 send_seq=43495 receive_seq=43495 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22024 bytes_read=69724 bytes_retransmit=0 bytes_invalid=0 send_seq=3645 receive_seq=3645 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999422 sd_pos=125397 heater_bed: target=60 temp=60.1 pwm=0.098 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.05 cputime=366.462 memavail=695976 print_time=3896.371 buffer_time=2.411 print_stall=0 extruder: target=220 temp=219.9 pwm=0.341
Stats 3893.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1054547 bytes_read=1366518 bytes_retransmit=0 bytes_invalid=0 send_seq=43523 receive_seq=43522 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22030 bytes_read=69740 bytes_retransmit=0 bytes_invalid=0 send_seq=3646 receive_seq=3646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999444 sd_pos=125452 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.20 cputime=366.578 memavail=695848 print_time=3898.337 buffer_time=3.377 print_stall=0 extruder: target=220 temp=220.3 pwm=0.283
Stats 3894.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1054783 bytes_read=1367024 bytes_retransmit=0 bytes_invalid=0 send_seq=43540 receive_seq=43540 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22036 bytes_read=69756 bytes_retransmit=0 bytes_invalid=0 send_seq=3647 receive_seq=3647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999438 sd_pos=125452 heater_bed: target=60 temp=60.0 pwm=0.174 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.20 cputime=366.672 memavail=695872 print_time=3898.337 buffer_time=2.376 print_stall=0 extruder: target=220 temp=220.3 pwm=0.283
Stats 3895.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1055744 bytes_read=1367604 bytes_retransmit=0 bytes_invalid=0 send_seq=43568 receive_seq=43568 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=22042 bytes_read=69785 bytes_retransmit=0 bytes_invalid=0 send_seq=3648 receive_seq=3648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999480 sd_pos=125511 heater_bed: target=60 temp=59.9 pwm=0.207 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.20 cputime=366.801 memavail=695888 print_time=3900.310 buffer_time=3.348 print_stall=0 extruder: target=220 temp=220.3 pwm=0.283
Stats 3896.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1056041 bytes_read=1368140 bytes_retransmit=0 bytes_invalid=0 send_seq=43587 receive_seq=43587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=22054 bytes_read=69817 bytes_retransmit=0 bytes_invalid=0 send_seq=3650 receive_seq=3650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999457 sd_pos=125511 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.20 cputime=366.884 memavail=695988 print_time=3900.310 buffer_time=2.347 print_stall=0 extruder: target=220 temp=220.2 pwm=0.283
Stats 3897.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1056882 bytes_read=1368671 bytes_retransmit=0 bytes_invalid=0 send_seq=43613 receive_seq=43613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=22060 bytes_read=69833 bytes_retransmit=0 bytes_invalid=0 send_seq=3651 receive_seq=3651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999460 sd_pos=125568 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.20 cputime=367.016 memavail=695760 print_time=3902.283 buffer_time=3.319 print_stall=0 extruder: target=220 temp=220.1 pwm=0.345
Stats 3898.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1057171 bytes_read=1369186 bytes_retransmit=0 bytes_invalid=0 send_seq=43630 receive_seq=43630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=22066 bytes_read=69849 bytes_retransmit=0 bytes_invalid=0 send_seq=3652 receive_seq=3652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999430 sd_pos=125568 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.19 cputime=367.135 memavail=695988 print_time=3902.283 buffer_time=2.316 print_stall=0 extruder: target=220 temp=219.8 pwm=0.400
Stats 3899.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1058105 bytes_read=1369766 bytes_retransmit=0 bytes_invalid=0 send_seq=43657 receive_seq=43657 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=22072 bytes_read=69865 bytes_retransmit=0 bytes_invalid=0 send_seq=3653 receive_seq=3653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999420 sd_pos=125637 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.19 cputime=367.262 memavail=695988 print_time=3904.261 buffer_time=3.294 print_stall=0 extruder: target=220 temp=219.6 pwm=0.400
Stats 3900.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1058380 bytes_read=1370267 bytes_retransmit=0 bytes_invalid=0 send_seq=43675 receive_seq=43675 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22078 bytes_read=69894 bytes_retransmit=0 bytes_invalid=0 send_seq=3654 receive_seq=3654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999413 sd_pos=125637 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.19 cputime=367.381 memavail=695884 print_time=3904.261 buffer_time=2.293 print_stall=0 extruder: target=220 temp=219.8 pwm=0.400
Stats 3901.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1059285 bytes_read=1370837 bytes_retransmit=0 bytes_invalid=0 send_seq=43700 receive_seq=43700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22084 bytes_read=69910 bytes_retransmit=0 bytes_invalid=0 send_seq=3655 receive_seq=3655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999413 sd_pos=125693 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.19 cputime=367.506 memavail=696000 print_time=3906.239 buffer_time=3.270 print_stall=0 extruder: target=220 temp=219.8 pwm=0.400
Stats 3902.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1059566 bytes_read=1371332 bytes_retransmit=0 bytes_invalid=0 send_seq=43716 receive_seq=43716 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22090 bytes_read=69926 bytes_retransmit=0 bytes_invalid=0 send_seq=3656 receive_seq=3656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999419 sd_pos=125693 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.19 cputime=367.616 memavail=696000 print_time=3906.239 buffer_time=2.270 print_stall=0 extruder: target=220 temp=220.0 pwm=0.291
Stats 3903.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1060394 bytes_read=1371858 bytes_retransmit=0 bytes_invalid=0 send_seq=43741 receive_seq=43741 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22096 bytes_read=69942 bytes_retransmit=0 bytes_invalid=0 send_seq=3657 receive_seq=3657 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999370 sd_pos=125750 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.17 cputime=367.744 memavail=695896 print_time=3908.223 buffer_time=3.253 print_stall=0 extruder: target=220 temp=220.2 pwm=0.291
Stats 3904.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1060653 bytes_read=1372398 bytes_retransmit=0 bytes_invalid=0 send_seq=43757 receive_seq=43757 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22102 bytes_read=69958 bytes_retransmit=0 bytes_invalid=0 send_seq=3658 receive_seq=3658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999390 sd_pos=125750 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.17 cputime=367.858 memavail=696000 print_time=3908.223 buffer_time=2.251 print_stall=0 extruder: target=220 temp=220.3 pwm=0.291
Stats 3905.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1061517 bytes_read=1372953 bytes_retransmit=0 bytes_invalid=0 send_seq=43783 receive_seq=43783 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22108 bytes_read=69987 bytes_retransmit=0 bytes_invalid=0 send_seq=3659 receive_seq=3659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999429 sd_pos=125807 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.3 sysload=1.17 cputime=367.965 memavail=695648 print_time=3910.205 buffer_time=3.232 print_stall=0 extruder: target=220 temp=220.3 pwm=0.291
Stats 3906.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1061729 bytes_read=1373429 bytes_retransmit=0 bytes_invalid=0 send_seq=43798 receive_seq=43798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22114 bytes_read=70003 bytes_retransmit=0 bytes_invalid=0 send_seq=3660 receive_seq=3660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999402 sd_pos=125807 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.17 cputime=368.074 memavail=695376 print_time=3910.205 buffer_time=2.232 print_stall=0 extruder: target=220 temp=220.2 pwm=0.291
Stats 3907.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1062598 bytes_read=1374009 bytes_retransmit=0 bytes_invalid=0 send_seq=43825 receive_seq=43825 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22120 bytes_read=70019 bytes_retransmit=0 bytes_invalid=0 send_seq=3661 receive_seq=3661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999403 sd_pos=125865 heater_bed: target=60 temp=59.8 pwm=0.178 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.8 sysload=1.17 cputime=368.203 memavail=695496 print_time=3912.194 buffer_time=3.217 print_stall=0 extruder: target=220 temp=220.1 pwm=0.327
Stats 3908.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1062908 bytes_read=1374519 bytes_retransmit=0 bytes_invalid=0 send_seq=43844 receive_seq=43844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22126 bytes_read=70035 bytes_retransmit=0 bytes_invalid=0 send_seq=3662 receive_seq=3662 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999414 sd_pos=125865 heater_bed: target=60 temp=59.8 pwm=0.200 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.24 cputime=368.326 memavail=695496 print_time=3912.194 buffer_time=2.215 print_stall=0 extruder: target=220 temp=219.8 pwm=0.407
Stats 3909.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1063839 bytes_read=1375070 bytes_retransmit=0 bytes_invalid=0 send_seq=43871 receive_seq=43871 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22132 bytes_read=70051 bytes_retransmit=0 bytes_invalid=0 send_seq=3663 receive_seq=3663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999421 sd_pos=125920 heater_bed: target=60 temp=59.8 pwm=0.148 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.24 cputime=368.463 memavail=695396 print_time=3914.180 buffer_time=3.198 print_stall=0 extruder: target=220 temp=219.7 pwm=0.407
Stats 3910.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1064097 bytes_read=1375600 bytes_retransmit=0 bytes_invalid=0 send_seq=43888 receive_seq=43888 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22138 bytes_read=70080 bytes_retransmit=0 bytes_invalid=0 send_seq=3664 receive_seq=3664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999347 sd_pos=125920 heater_bed: target=60 temp=59.9 pwm=0.093 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.24 cputime=368.560 memavail=695500 print_time=3914.180 buffer_time=2.197 print_stall=0 extruder: target=220 temp=219.7 pwm=0.407
Stats 3911.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1065068 bytes_read=1376162 bytes_retransmit=0 bytes_invalid=0 send_seq=43917 receive_seq=43917 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22144 bytes_read=70096 bytes_retransmit=0 bytes_invalid=0 send_seq=3665 receive_seq=3665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999337 sd_pos=125975 heater_bed: target=60 temp=59.9 pwm=0.095 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.24 cputime=368.701 memavail=695500 print_time=3916.175 buffer_time=3.191 print_stall=0 extruder: target=220 temp=219.8 pwm=0.407
Stats 3912.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1065346 bytes_read=1376635 bytes_retransmit=0 bytes_invalid=0 send_seq=43934 receive_seq=43934 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22150 bytes_read=70112 bytes_retransmit=0 bytes_invalid=0 send_seq=3666 receive_seq=3666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999337 sd_pos=125975 heater_bed: target=60 temp=59.9 pwm=0.095 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.24 cputime=368.819 memavail=695696 print_time=3916.175 buffer_time=2.190 print_stall=0 extruder: target=220 temp=219.8 pwm=0.338
Stats 3913.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1066294 bytes_read=1377215 bytes_retransmit=0 bytes_invalid=0 send_seq=43961 receive_seq=43961 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22156 bytes_read=70128 bytes_retransmit=0 bytes_invalid=0 send_seq=3667 receive_seq=3667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999343 sd_pos=126056 heater_bed: target=60 temp=60.0 pwm=0.058 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.22 cputime=368.950 memavail=695760 print_time=3918.174 buffer_time=3.188 print_stall=0 extruder: target=220 temp=220.1 pwm=0.338
Stats 3914.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1066572 bytes_read=1377725 bytes_retransmit=0 bytes_invalid=0 send_seq=43977 receive_seq=43977 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22162 bytes_read=70144 bytes_retransmit=0 bytes_invalid=0 send_seq=3668 receive_seq=3668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999385 sd_pos=126056 heater_bed: target=60 temp=60.0 pwm=0.115 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.4 sysload=1.22 cputime=369.064 memavail=695764 print_time=3918.174 buffer_time=2.187 print_stall=0 extruder: target=220 temp=220.3 pwm=0.266
Stats 3915.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1067455 bytes_read=1378276 bytes_retransmit=0 bytes_invalid=0 send_seq=44005 receive_seq=44005 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22168 bytes_read=70173 bytes_retransmit=0 bytes_invalid=0 send_seq=3669 receive_seq=3669 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999397 sd_pos=126114 heater_bed: target=60 temp=60.0 pwm=0.090 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.22 cputime=369.193 memavail=695484 print_time=3920.162 buffer_time=3.173 print_stall=0 extruder: target=220 temp=220.4 pwm=0.266
Stats 3916.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1067759 bytes_read=1378811 bytes_retransmit=0 bytes_invalid=0 send_seq=44023 receive_seq=44023 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22174 bytes_read=70188 bytes_retransmit=0 bytes_invalid=0 send_seq=3670 receive_seq=3670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999383 sd_pos=126114 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.22 cputime=369.284 memavail=695764 print_time=3920.162 buffer_time=2.170 print_stall=0 extruder: target=220 temp=220.3 pwm=0.266
Stats 3917.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1068639 bytes_read=1379351 bytes_retransmit=0 bytes_invalid=0 send_seq=44049 receive_seq=44048 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22180 bytes_read=70203 bytes_retransmit=0 bytes_invalid=0 send_seq=3671 receive_seq=3671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999367 sd_pos=126168 heater_bed: target=60 temp=60.0 pwm=0.081 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.22 cputime=369.412 memavail=695764 print_time=3922.148 buffer_time=3.156 print_stall=0 extruder: target=220 temp=220.0 pwm=0.377
Stats 3918.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1068939 bytes_read=1379842 bytes_retransmit=0 bytes_invalid=0 send_seq=44066 receive_seq=44066 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22186 bytes_read=70218 bytes_retransmit=0 bytes_invalid=0 send_seq=3672 receive_seq=3672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999367 sd_pos=126168 heater_bed: target=60 temp=60.0 pwm=0.081 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.20 cputime=369.535 memavail=695660 print_time=3922.148 buffer_time=2.149 print_stall=0 extruder: target=220 temp=219.8 pwm=0.377
Stats 3919.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1069837 bytes_read=1380437 bytes_retransmit=0 bytes_invalid=0 send_seq=44093 receive_seq=44093 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22192 bytes_read=70233 bytes_retransmit=0 bytes_invalid=0 send_seq=3673 receive_seq=3673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999359 sd_pos=126226 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.20 cputime=369.634 memavail=695772 print_time=3924.129 buffer_time=3.130 print_stall=0 extruder: target=220 temp=219.6 pwm=0.433
Stats 3920.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1070104 bytes_read=1380947 bytes_retransmit=0 bytes_invalid=0 send_seq=44110 receive_seq=44110 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=22198 bytes_read=70261 bytes_retransmit=0 bytes_invalid=0 send_seq=3674 receive_seq=3674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999342 sd_pos=126226 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.20 cputime=369.749 memavail=695772 print_time=3924.129 buffer_time=2.130 print_stall=0 extruder: target=220 temp=219.6 pwm=0.433
Stats 3921.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1071047 bytes_read=1381470 bytes_retransmit=0 bytes_invalid=0 send_seq=44138 receive_seq=44138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=22204 bytes_read=70277 bytes_retransmit=0 bytes_invalid=0 send_seq=3675 receive_seq=3675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999298 sd_pos=126281 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.20 cputime=369.854 memavail=695376 print_time=3926.103 buffer_time=3.104 print_stall=0 extruder: target=220 temp=219.7 pwm=0.382
Stats 3922.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1071259 bytes_read=1381990 bytes_retransmit=0 bytes_invalid=0 send_seq=44153 receive_seq=44153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=22210 bytes_read=70293 bytes_retransmit=0 bytes_invalid=0 send_seq=3676 receive_seq=3676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999268 sd_pos=126281 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.20 cputime=369.967 memavail=695524 print_time=3926.103 buffer_time=2.103 print_stall=0 extruder: target=220 temp=219.8 pwm=0.382
Stats 3923.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1072136 bytes_read=1382535 bytes_retransmit=0 bytes_invalid=0 send_seq=44179 receive_seq=44179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=22216 bytes_read=70309 bytes_retransmit=0 bytes_invalid=0 send_seq=3677 receive_seq=3677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999224 sd_pos=126340 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.19 cputime=370.099 memavail=695524 print_time=3928.078 buffer_time=3.077 print_stall=0 extruder: target=220 temp=220.2 pwm=0.257
Stats 3924.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1072515 bytes_read=1383046 bytes_retransmit=0 bytes_invalid=0 send_seq=44199 receive_seq=44198 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=22222 bytes_read=70325 bytes_retransmit=0 bytes_invalid=0 send_seq=3678 receive_seq=3678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999265 sd_pos=126340 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.19 cputime=370.215 memavail=695520 print_time=3928.078 buffer_time=2.076 print_stall=0 extruder: target=220 temp=220.4 pwm=0.257
Stats 3925.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1073311 bytes_read=1383611 bytes_retransmit=0 bytes_invalid=0 send_seq=44222 receive_seq=44222 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22228 bytes_read=70354 bytes_retransmit=0 bytes_invalid=0 send_seq=3679 receive_seq=3679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999304 sd_pos=126420 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.19 cputime=370.329 memavail=696276 print_time=3930.048 buffer_time=3.045 print_stall=0 extruder: target=220 temp=220.6 pwm=0.257
Stats 3926.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1073542 bytes_read=1384093 bytes_retransmit=0 bytes_invalid=0 send_seq=44238 receive_seq=44237 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22234 bytes_read=70370 bytes_retransmit=0 bytes_invalid=0 send_seq=3680 receive_seq=3680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999320 sd_pos=126420 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.19 cputime=370.438 memavail=696284 print_time=3930.048 buffer_time=2.040 print_stall=0 extruder: target=220 temp=220.4 pwm=0.316
Stats 3927.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1074485 bytes_read=1384639 bytes_retransmit=0 bytes_invalid=0 send_seq=44266 receive_seq=44266 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22240 bytes_read=70386 bytes_retransmit=0 bytes_invalid=0 send_seq=3681 receive_seq=3681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999340 sd_pos=126478 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.4 sysload=1.19 cputime=370.549 memavail=696076 print_time=3932.025 buffer_time=3.003 print_stall=0 extruder: target=220 temp=220.1 pwm=0.316
Stats 3928.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1074781 bytes_read=1385187 bytes_retransmit=0 bytes_invalid=0 send_seq=44283 receive_seq=44283 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22246 bytes_read=70402 bytes_retransmit=0 bytes_invalid=0 send_seq=3682 receive_seq=3682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999337 sd_pos=126478 heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.17 cputime=370.645 memavail=696292 print_time=3932.025 buffer_time=2.002 print_stall=0 extruder: target=220 temp=219.9 pwm=0.368
Stats 3929.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1075633 bytes_read=1385714 bytes_retransmit=0 bytes_invalid=0 send_seq=44308 receive_seq=44306 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22252 bytes_read=70418 bytes_retransmit=0 bytes_invalid=0 send_seq=3683 receive_seq=3683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999325 sd_pos=126533 heater_bed: target=60 temp=60.1 pwm=0.134 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.17 cputime=370.759 memavail=696292 print_time=3933.996 buffer_time=2.973 print_stall=0 extruder: target=220 temp=219.7 pwm=0.429
Stats 3930.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1076483 bytes_read=1386260 bytes_retransmit=0 bytes_invalid=0 send_seq=44333 receive_seq=44332 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=22258 bytes_read=70447 bytes_retransmit=0 bytes_invalid=0 send_seq=3684 receive_seq=3684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999284 sd_pos=126589 heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.17 cputime=370.871 memavail=696188 print_time=3935.965 buffer_time=3.935 print_stall=0 extruder: target=220 temp=219.6 pwm=0.429
Stats 3931.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1076764 bytes_read=1386822 bytes_retransmit=0 bytes_invalid=0 send_seq=44351 receive_seq=44350 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=22264 bytes_read=70463 bytes_retransmit=0 bytes_invalid=0 send_seq=3685 receive_seq=3685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999295 sd_pos=126589 heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.17 cputime=370.994 memavail=696296 print_time=3935.965 buffer_time=2.928 print_stall=0 extruder: target=220 temp=219.6 pwm=0.429
Stats 3932.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1077635 bytes_read=1387376 bytes_retransmit=0 bytes_invalid=0 send_seq=44377 receive_seq=44377 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=22270 bytes_read=70479 bytes_retransmit=0 bytes_invalid=0 send_seq=3686 receive_seq=3686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999301 sd_pos=126643 heater_bed: target=60 temp=59.9 pwm=0.195 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.17 cputime=371.135 memavail=696296 print_time=3937.929 buffer_time=3.891 print_stall=0 extruder: target=220 temp=219.8 pwm=0.363
Stats 3933.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1077910 bytes_read=1387877 bytes_retransmit=0 bytes_invalid=0 send_seq=44394 receive_seq=44394 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=22276 bytes_read=70495 bytes_retransmit=0 bytes_invalid=0 send_seq=3687 receive_seq=3687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999313 sd_pos=126643 heater_bed: target=60 temp=59.9 pwm=0.195 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.08 cputime=371.252 memavail=696192 print_time=3937.929 buffer_time=2.884 print_stall=0 extruder: target=220 temp=220.1 pwm=0.301
Stats 3934.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1078856 bytes_read=1388476 bytes_retransmit=0 bytes_invalid=0 send_seq=44422 receive_seq=44422 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=22282 bytes_read=70511 bytes_retransmit=0 bytes_invalid=0 send_seq=3688 receive_seq=3688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999326 sd_pos=126701 heater_bed: target=60 temp=59.9 pwm=0.195 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.08 cputime=371.384 memavail=696304 print_time=3939.900 buffer_time=3.854 print_stall=0 extruder: target=220 temp=220.3 pwm=0.251
Stats 3935.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1079194 bytes_read=1388964 bytes_retransmit=0 bytes_invalid=0 send_seq=44441 receive_seq=44441 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22288 bytes_read=70540 bytes_retransmit=0 bytes_invalid=0 send_seq=3689 receive_seq=3689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999344 sd_pos=126701 heater_bed: target=60 temp=59.8 pwm=0.228 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.08 cputime=371.505 memavail=696728 print_time=3939.900 buffer_time=2.853 print_stall=0 extruder: target=220 temp=220.4 pwm=0.251
Stats 3936.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1080099 bytes_read=1389512 bytes_retransmit=0 bytes_invalid=0 send_seq=44468 receive_seq=44468 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22294 bytes_read=70556 bytes_retransmit=0 bytes_invalid=0 send_seq=3690 receive_seq=3690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999353 sd_pos=126754 heater_bed: target=60 temp=59.9 pwm=0.115 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.08 cputime=371.641 memavail=696164 print_time=3941.862 buffer_time=3.814 print_stall=0 extruder: target=220 temp=220.4 pwm=0.251
Stats 3937.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1080417 bytes_read=1390046 bytes_retransmit=0 bytes_invalid=0 send_seq=44486 receive_seq=44486 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22300 bytes_read=70572 bytes_retransmit=0 bytes_invalid=0 send_seq=3691 receive_seq=3691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999355 sd_pos=126754 heater_bed: target=60 temp=59.9 pwm=0.115 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.08 cputime=371.755 memavail=696308 print_time=3941.862 buffer_time=2.810 print_stall=0 extruder: target=220 temp=220.2 pwm=0.319
Stats 3938.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1081365 bytes_read=1390587 bytes_retransmit=0 bytes_invalid=0 send_seq=44514 receive_seq=44514 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22306 bytes_read=70588 bytes_retransmit=0 bytes_invalid=0 send_seq=3692 receive_seq=3692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999362 sd_pos=126813 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.99 cputime=371.888 memavail=696308 print_time=3943.825 buffer_time=3.769 print_stall=0 extruder: target=220 temp=219.9 pwm=0.398
Stats 3939.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1081635 bytes_read=1391098 bytes_retransmit=0 bytes_invalid=0 send_seq=44530 receive_seq=44530 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22312 bytes_read=70604 bytes_retransmit=0 bytes_invalid=0 send_seq=3693 receive_seq=3693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999357 sd_pos=126813 heater_bed: target=60 temp=59.9 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.99 cputime=371.984 memavail=696204 print_time=3943.825 buffer_time=2.768 print_stall=0 extruder: target=220 temp=219.6 pwm=0.398
Stats 3940.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1082463 bytes_read=1391662 bytes_retransmit=0 bytes_invalid=0 send_seq=44554 receive_seq=44554 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22318 bytes_read=70633 bytes_retransmit=0 bytes_invalid=0 send_seq=3694 receive_seq=3694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999351 sd_pos=126895 heater_bed: target=60 temp=59.9 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=22.5 sysload=0.99 cputime=372.113 memavail=696160 print_time=3945.787 buffer_time=3.723 print_stall=0 extruder: target=220 temp=219.6 pwm=0.453
Stats 3941.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1082777 bytes_read=1392163 bytes_retransmit=0 bytes_invalid=0 send_seq=44572 receive_seq=44572 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22324 bytes_read=70649 bytes_retransmit=0 bytes_invalid=0 send_seq=3695 receive_seq=3695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999365 sd_pos=126895 heater_bed: target=60 temp=59.9 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.99 cputime=372.239 memavail=696320 print_time=3945.787 buffer_time=2.722 print_stall=0 extruder: target=220 temp=219.5 pwm=0.453
Stats 3942.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1083744 bytes_read=1392733 bytes_retransmit=0 bytes_invalid=0 send_seq=44600 receive_seq=44600 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22330 bytes_read=70665 bytes_retransmit=0 bytes_invalid=0 send_seq=3696 receive_seq=3696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999383 sd_pos=126954 heater_bed: target=60 temp=60.0 pwm=0.059 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.99 cputime=372.370 memavail=696248 print_time=3947.732 buffer_time=3.666 print_stall=0 extruder: target=220 temp=219.7 pwm=0.375
Stats 3943.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1084019 bytes_read=1393248 bytes_retransmit=0 bytes_invalid=0 send_seq=44617 receive_seq=44617 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22336 bytes_read=70681 bytes_retransmit=0 bytes_invalid=0 send_seq=3697 receive_seq=3697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999408 sd_pos=126954 heater_bed: target=60 temp=60.0 pwm=0.059 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=0.99 cputime=372.465 memavail=696320 print_time=3947.732 buffer_time=2.662 print_stall=0 extruder: target=220 temp=220.1 pwm=0.287
Stats 3944.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1084915 bytes_read=1393794 bytes_retransmit=0 bytes_invalid=0 send_seq=44643 receive_seq=44643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22342 bytes_read=70697 bytes_retransmit=0 bytes_invalid=0 send_seq=3698 receive_seq=3698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999399 sd_pos=127009 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.99 cputime=372.608 memavail=696320 print_time=3949.675 buffer_time=3.604 print_stall=0 extruder: target=220 temp=220.4 pwm=0.224
Stats 3945.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1085221 bytes_read=1394324 bytes_retransmit=0 bytes_invalid=0 send_seq=44660 receive_seq=44660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22348 bytes_read=70726 bytes_retransmit=0 bytes_invalid=0 send_seq=3699 receive_seq=3699 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999401 sd_pos=127009 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.4 sysload=0.99 cputime=372.725 memavail=696408 print_time=3949.675 buffer_time=2.602 print_stall=0 extruder: target=220 temp=220.5 pwm=0.224
Stats 3946.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1086055 bytes_read=1394874 bytes_retransmit=0 bytes_invalid=0 send_seq=44685 receive_seq=44685 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22354 bytes_read=70742 bytes_retransmit=0 bytes_invalid=0 send_seq=3700 receive_seq=3700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999390 sd_pos=127068 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=39.7 mcu_temp: temp=37.5 chamber: temp=22.5 sysload=0.99 cputime=372.849 memavail=696520 print_time=3951.614 buffer_time=3.538 print_stall=0 extruder: target=220 temp=220.4 pwm=0.321
Stats 3947.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1086329 bytes_read=1395360 bytes_retransmit=0 bytes_invalid=0 send_seq=44702 receive_seq=44702 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22360 bytes_read=70758 bytes_retransmit=0 bytes_invalid=0 send_seq=3701 receive_seq=3701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999388 sd_pos=127068 heater_bed: target=60 temp=60.1 pwm=0.048 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.99 cputime=372.964 memavail=696584 print_time=3951.614 buffer_time=2.535 print_stall=0 extruder: target=220 temp=220.2 pwm=0.321
Stats 3948.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=1087264 bytes_read=1395950 bytes_retransmit=0 bytes_invalid=0 send_seq=44731 receive_seq=44731 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22366 bytes_read=70774 bytes_retransmit=0 bytes_invalid=0 send_seq=3702 receive_seq=3702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999388 sd_pos=127123 heater_bed: target=60 temp=60.1 pwm=0.048 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.15 cputime=373.097 memavail=696480 print_time=3953.546 buffer_time=3.464 print_stall=0 extruder: target=220 temp=219.8 pwm=0.431
Stats 3949.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1087528 bytes_read=1396465 bytes_retransmit=0 bytes_invalid=0 send_seq=44748 receive_seq=44748 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001271 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22372 bytes_read=70790 bytes_retransmit=0 bytes_invalid=0 send_seq=3703 receive_seq=3703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999377 sd_pos=127123 heater_bed: target=60 temp=60.2 pwm=0.048 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.7 sysload=1.15 cputime=373.218 memavail=696584 print_time=3953.546 buffer_time=2.459 print_stall=0 extruder: target=220 temp=219.6 pwm=0.431
Stats 3950.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1088386 bytes_read=1396996 bytes_retransmit=0 bytes_invalid=0 send_seq=44774 receive_seq=44774 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001265 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22378 bytes_read=70819 bytes_retransmit=0 bytes_invalid=0 send_seq=3704 receive_seq=3704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999389 sd_pos=127181 heater_bed: target=60 temp=60.2 pwm=0.110 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.15 cputime=373.365 memavail=696584 print_time=3955.474 buffer_time=3.382 print_stall=0 extruder: target=220 temp=219.6 pwm=0.431
Stats 3951.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1088617 bytes_read=1397531 bytes_retransmit=0 bytes_invalid=0 send_seq=44790 receive_seq=44790 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001263 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22384 bytes_read=70835 bytes_retransmit=0 bytes_invalid=0 send_seq=3705 receive_seq=3705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999407 sd_pos=127181 heater_bed: target=60 temp=60.2 pwm=0.110 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.15 cputime=373.486 memavail=696368 print_time=3955.474 buffer_time=2.377 print_stall=0 extruder: target=220 temp=219.6 pwm=0.367
Stats 3952.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1089405 bytes_read=1398082 bytes_retransmit=0 bytes_invalid=0 send_seq=44815 receive_seq=44815 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001259 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22396 bytes_read=70867 bytes_retransmit=0 bytes_invalid=0 send_seq=3707 receive_seq=3707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999712 adj=49999410 sd_pos=127234 heater_bed: target=60 temp=60.2 pwm=0.110 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.15 cputime=373.610 memavail=696596 print_time=3957.394 buffer_time=3.296 print_stall=0 extruder: target=220 temp=219.9 pwm=0.301
Stats 3953.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1089633 bytes_read=1398563 bytes_retransmit=0 bytes_invalid=0 send_seq=44831 receive_seq=44831 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22402 bytes_read=70883 bytes_retransmit=0 bytes_invalid=0 send_seq=3708 receive_seq=3708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999506 sd_pos=127234 heater_bed: target=60 temp=60.1 pwm=0.110 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.22 cputime=373.723 memavail=696596 print_time=3957.394 buffer_time=2.295 print_stall=0 extruder: target=220 temp=220.2 pwm=0.238
Stats 3954.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1090607 bytes_read=1399168 bytes_retransmit=0 bytes_invalid=0 send_seq=44860 receive_seq=44860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22408 bytes_read=70899 bytes_retransmit=0 bytes_invalid=0 send_seq=3709 receive_seq=3709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999715 adj=49999455 sd_pos=127292 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.22 cputime=373.852 memavail=696224 print_time=3959.311 buffer_time=3.210 print_stall=0 extruder: target=220 temp=220.4 pwm=0.238
Stats 3955.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1090913 bytes_read=1399668 bytes_retransmit=0 bytes_invalid=0 send_seq=44877 receive_seq=44877 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22414 bytes_read=70928 bytes_retransmit=0 bytes_invalid=0 send_seq=3710 receive_seq=3710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999427 sd_pos=127292 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.22 cputime=373.965 memavail=696104 print_time=3959.311 buffer_time=2.208 print_stall=0 extruder: target=220 temp=220.4 pwm=0.238
Stats 3956.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1091860 bytes_read=1400224 bytes_retransmit=0 bytes_invalid=0 send_seq=44906 receive_seq=44906 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22420 bytes_read=70944 bytes_retransmit=0 bytes_invalid=0 send_seq=3711 receive_seq=3711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999713 adj=49999392 sd_pos=127347 heater_bed: target=60 temp=60.0 pwm=0.192 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.22 cputime=374.106 memavail=696096 print_time=3961.220 buffer_time=3.106 print_stall=0 extruder: target=220 temp=220.3 pwm=0.322
Stats 3957.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1092193 bytes_read=1400759 bytes_retransmit=0 bytes_invalid=0 send_seq=44924 receive_seq=44924 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22426 bytes_read=70960 bytes_retransmit=0 bytes_invalid=0 send_seq=3712 receive_seq=3712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999395 sd_pos=127347 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.22 cputime=374.216 memavail=695992 print_time=3961.220 buffer_time=2.106 print_stall=0 extruder: target=220 temp=220.0 pwm=0.410
Stats 3958.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1093075 bytes_read=1401309 bytes_retransmit=0 bytes_invalid=0 send_seq=44951 receive_seq=44951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22432 bytes_read=70976 bytes_retransmit=0 bytes_invalid=0 send_seq=3713 receive_seq=3713 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999713 adj=49999336 sd_pos=127406 heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.20 cputime=374.337 memavail=696104 print_time=3963.123 buffer_time=3.009 print_stall=0 extruder: target=220 temp=219.7 pwm=0.410
Stats 3959.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1093303 bytes_read=1401792 bytes_retransmit=0 bytes_invalid=0 send_seq=44967 receive_seq=44967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22438 bytes_read=70992 bytes_retransmit=0 bytes_invalid=0 send_seq=3714 receive_seq=3714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999713 adj=49999345 sd_pos=127406 heater_bed: target=60 temp=60.0 pwm=0.129 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.20 cputime=374.452 memavail=696104 print_time=3963.123 buffer_time=2.008 print_stall=0 extruder: target=220 temp=219.6 pwm=0.410
Stats 3960.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1094172 bytes_read=1402352 bytes_retransmit=0 bytes_invalid=0 send_seq=44992 receive_seq=44992 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22444 bytes_read=71021 bytes_retransmit=0 bytes_invalid=0 send_seq=3715 receive_seq=3715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999354 sd_pos=127473 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.20 cputime=374.577 memavail=696048 print_time=3965.016 buffer_time=2.898 print_stall=0 extruder: target=220 temp=219.6 pwm=0.410
Stats 3961.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1095064 bytes_read=1402902 bytes_retransmit=0 bytes_invalid=0 send_seq=45019 receive_seq=45019 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22450 bytes_read=71037 bytes_retransmit=0 bytes_invalid=0 send_seq=3716 receive_seq=3716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999366 sd_pos=127529 heater_bed: target=60 temp=60.0 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.1 chamber: temp=22.5 sysload=1.20 cputime=374.703 memavail=696108 print_time=3966.903 buffer_time=3.783 print_stall=0 extruder: target=220 temp=219.8 pwm=0.351
Stats 3962.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1095410 bytes_read=1403413 bytes_retransmit=0 bytes_invalid=0 send_seq=45039 receive_seq=45039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22456 bytes_read=71053 bytes_retransmit=0 bytes_invalid=0 send_seq=3717 receive_seq=3717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999366 sd_pos=127529 heater_bed: target=60 temp=60.0 pwm=0.129 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=22.7 sysload=1.20 cputime=374.820 memavail=696108 print_time=3966.903 buffer_time=2.779 print_stall=0 extruder: target=220 temp=220.0 pwm=0.298
Stats 3963.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=1096254 bytes_read=1404002 bytes_retransmit=0 bytes_invalid=0 send_seq=45065 receive_seq=45065 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22462 bytes_read=71069 bytes_retransmit=0 bytes_invalid=0 send_seq=3718 receive_seq=3718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999718 adj=49999358 sd_pos=127584 heater_bed: target=60 temp=60.1 pwm=0.077 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.19 cputime=374.956 memavail=696108 print_time=3968.779 buffer_time=3.650 print_stall=0 extruder: target=220 temp=220.3 pwm=0.298
Stats 3964.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1096498 bytes_read=1404503 bytes_retransmit=0 bytes_invalid=0 send_seq=45082 receive_seq=45082 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22468 bytes_read=71085 bytes_retransmit=0 bytes_invalid=0 send_seq=3719 receive_seq=3719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999374 sd_pos=127584 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=1.19 cputime=375.071 memavail=696120 print_time=3968.779 buffer_time=2.648 print_stall=0 extruder: target=220 temp=220.4 pwm=0.247
Stats 3965.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1097342 bytes_read=1405044 bytes_retransmit=0 bytes_invalid=0 send_seq=45107 receive_seq=45107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22474 bytes_read=71114 bytes_retransmit=0 bytes_invalid=0 send_seq=3720 receive_seq=3720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999720 adj=49999401 sd_pos=127643 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.19 cputime=375.201 memavail=696532 print_time=3970.652 buffer_time=3.519 print_stall=0 extruder: target=220 temp=220.4 pwm=0.247
Stats 3966.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1097703 bytes_read=1405603 bytes_retransmit=0 bytes_invalid=0 send_seq=45128 receive_seq=45128 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22480 bytes_read=71130 bytes_retransmit=0 bytes_invalid=0 send_seq=3721 receive_seq=3721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999725 adj=49999372 sd_pos=127643 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.19 cputime=375.322 memavail=696644 print_time=3970.652 buffer_time=2.515 print_stall=0 extruder: target=220 temp=220.2 pwm=0.316
Stats 3967.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1098626 bytes_read=1406144 bytes_retransmit=0 bytes_invalid=0 send_seq=45156 receive_seq=45156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22486 bytes_read=71146 bytes_retransmit=0 bytes_invalid=0 send_seq=3722 receive_seq=3722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999265 sd_pos=127723 heater_bed: target=60 temp=60.1 pwm=0.061 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.5 sysload=1.19 cputime=375.451 memavail=696628 print_time=3972.523 buffer_time=3.385 print_stall=0 extruder: target=220 temp=219.9 pwm=0.398
Stats 3968.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1098838 bytes_read=1406635 bytes_retransmit=0 bytes_invalid=0 send_seq=45171 receive_seq=45171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22492 bytes_read=71162 bytes_retransmit=0 bytes_invalid=0 send_seq=3723 receive_seq=3723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999729 adj=49999291 sd_pos=127723 heater_bed: target=60 temp=60.1 pwm=0.061 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.09 cputime=375.566 memavail=696628 print_time=3972.523 buffer_time=2.382 print_stall=0 extruder: target=220 temp=219.7 pwm=0.398
Stats 3969.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1099718 bytes_read=1407224 bytes_retransmit=0 bytes_invalid=0 send_seq=45197 receive_seq=45197 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22498 bytes_read=71178 bytes_retransmit=0 bytes_invalid=0 send_seq=3724 receive_seq=3724 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999734 adj=49999318 sd_pos=127782 heater_bed: target=60 temp=60.1 pwm=0.061 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.09 cputime=375.689 memavail=696524 print_time=3974.369 buffer_time=3.227 print_stall=0 extruder: target=220 temp=219.6 pwm=0.398
Stats 3970.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1099946 bytes_read=1407705 bytes_retransmit=0 bytes_invalid=0 send_seq=45213 receive_seq=45213 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22504 bytes_read=71207 bytes_retransmit=0 bytes_invalid=0 send_seq=3725 receive_seq=3725 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999735 adj=49999381 sd_pos=127782 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.09 cputime=375.800 memavail=696640 print_time=3974.369 buffer_time=2.226 print_stall=0 extruder: target=220 temp=219.6 pwm=0.398
Stats 3972.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1100914 bytes_read=1408281 bytes_retransmit=0 bytes_invalid=0 send_seq=45243 receive_seq=45243 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22510 bytes_read=71223 bytes_retransmit=0 bytes_invalid=0 send_seq=3726 receive_seq=3726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999746 adj=49999401 sd_pos=127837 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.09 cputime=375.928 memavail=696640 print_time=3976.210 buffer_time=3.064 print_stall=0 extruder: target=220 temp=219.8 pwm=0.344
Stats 3973.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1101173 bytes_read=1408805 bytes_retransmit=0 bytes_invalid=0 send_seq=45259 receive_seq=45259 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22516 bytes_read=71239 bytes_retransmit=0 bytes_invalid=0 send_seq=3727 receive_seq=3727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999746 adj=49999429 sd_pos=127837 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.09 cputime=376.045 memavail=696640 print_time=3976.210 buffer_time=2.060 print_stall=0 extruder: target=220 temp=220.0 pwm=0.293
Stats 3974.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1102090 bytes_read=1409346 bytes_retransmit=0 bytes_invalid=0 send_seq=45287 receive_seq=45287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22522 bytes_read=71255 bytes_retransmit=0 bytes_invalid=0 send_seq=3728 receive_seq=3728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999740 adj=49999449 sd_pos=127894 heater_bed: target=60 temp=60.1 pwm=0.106 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.00 cputime=376.155 memavail=696648 print_time=3978.039 buffer_time=2.885 print_stall=0 extruder: target=220 temp=220.2 pwm=0.293
Stats 3975.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1102968 bytes_read=1409907 bytes_retransmit=0 bytes_invalid=0 send_seq=45313 receive_seq=45313 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22528 bytes_read=71271 bytes_retransmit=0 bytes_invalid=0 send_seq=3729 receive_seq=3729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999737 adj=49999406 sd_pos=127948 heater_bed: target=60 temp=60.1 pwm=0.106 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.7 sysload=1.00 cputime=376.288 memavail=696648 print_time=3979.855 buffer_time=3.698 print_stall=0 extruder: target=220 temp=220.3 pwm=0.293
Stats 3976.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1103190 bytes_read=1410426 bytes_retransmit=0 bytes_invalid=0 send_seq=45328 receive_seq=45328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22534 bytes_read=71300 bytes_retransmit=0 bytes_invalid=0 send_seq=3730 receive_seq=3730 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999734 adj=49999376 sd_pos=127948 heater_bed: target=60 temp=60.2 pwm=0.005 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.00 cputime=376.402 memavail=696416 print_time=3979.855 buffer_time=2.697 print_stall=0 extruder: target=220 temp=220.2 pwm=0.293
Stats 3977.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1104145 bytes_read=1410972 bytes_retransmit=0 bytes_invalid=0 send_seq=45357 receive_seq=45357 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001405 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22540 bytes_read=71316 bytes_retransmit=0 bytes_invalid=0 send_seq=3731 receive_seq=3731 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999732 adj=49999318 sd_pos=128005 heater_bed: target=60 temp=60.1 pwm=0.117 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.7 sysload=1.00 cputime=376.536 memavail=696652 print_time=3981.661 buffer_time=3.497 print_stall=0 extruder: target=220 temp=220.3 pwm=0.293
Stats 3978.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1104480 bytes_read=1411512 bytes_retransmit=0 bytes_invalid=0 send_seq=45377 receive_seq=45377 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22546 bytes_read=71332 bytes_retransmit=0 bytes_invalid=0 send_seq=3732 receive_seq=3732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999731 adj=49999270 sd_pos=128005 heater_bed: target=60 temp=60.1 pwm=0.117 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.00 cputime=376.655 memavail=696652 print_time=3981.661 buffer_time=2.495 print_stall=0 extruder: target=220 temp=220.0 pwm=0.362
Stats 3979.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000014 bytes_write=1105268 bytes_read=1412062 bytes_retransmit=0 bytes_invalid=0 send_seq=45401 receive_seq=45401 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22552 bytes_read=71348 bytes_retransmit=0 bytes_invalid=0 send_seq=3733 receive_seq=3733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999728 adj=49999284 sd_pos=128060 heater_bed: target=60 temp=60.1 pwm=0.117 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.92 cputime=376.782 memavail=696544 print_time=3983.457 buffer_time=3.284 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3980.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1105594 bytes_read=1412573 bytes_retransmit=0 bytes_invalid=0 send_seq=45420 receive_seq=45420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001390 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22558 bytes_read=71364 bytes_retransmit=0 bytes_invalid=0 send_seq=3734 receive_seq=3734 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999727 adj=49999285 sd_pos=128060 heater_bed: target=60 temp=60.1 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.7 sysload=0.92 cputime=376.898 memavail=696560 print_time=3983.457 buffer_time=2.283 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3981.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1106448 bytes_read=1413143 bytes_retransmit=0 bytes_invalid=0 send_seq=45445 receive_seq=45445 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001393 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22564 bytes_read=71393 bytes_retransmit=0 bytes_invalid=0 send_seq=3735 receive_seq=3735 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999730 adj=49999274 sd_pos=128119 heater_bed: target=60 temp=60.2 pwm=0.064 raspberry_pi: temp=40.2 mcu_temp: temp=37.2 chamber: temp=22.7 sysload=0.92 cputime=377.027 memavail=696664 print_time=3985.246 buffer_time=3.072 print_stall=0 extruder: target=220 temp=219.8 pwm=0.362
Stats 3982.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1106692 bytes_read=1413643 bytes_retransmit=0 bytes_invalid=0 send_seq=45462 receive_seq=45462 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22570 bytes_read=71409 bytes_retransmit=0 bytes_invalid=0 send_seq=3736 receive_seq=3736 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999727 adj=49999307 sd_pos=128119 heater_bed: target=60 temp=60.1 pwm=0.121 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=0.92 cputime=377.145 memavail=696448 print_time=3985.246 buffer_time=2.069 print_stall=0 extruder: target=220 temp=219.8 pwm=0.382
Stats 3983.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1107530 bytes_read=1414184 bytes_retransmit=0 bytes_invalid=0 send_seq=45488 receive_seq=45488 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001379 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22576 bytes_read=71425 bytes_retransmit=0 bytes_invalid=0 send_seq=3737 receive_seq=3737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999730 adj=49999294 sd_pos=128174 heater_bed: target=60 temp=60.1 pwm=0.121 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.92 cputime=377.273 memavail=696664 print_time=3987.027 buffer_time=2.846 print_stall=0 extruder: target=220 temp=219.9 pwm=0.382
Stats 3984.0: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1108492 bytes_read=1414758 bytes_retransmit=0 bytes_invalid=0 send_seq=45517 receive_seq=45517 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22582 bytes_read=71441 bytes_retransmit=0 bytes_invalid=0 send_seq=3738 receive_seq=3738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999727 adj=49999353 sd_pos=128261 heater_bed: target=60 temp=60.1 pwm=0.121 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.93 cputime=377.411 memavail=696664 print_time=3988.815 buffer_time=3.632 print_stall=0 extruder: target=220 temp=220.0 pwm=0.317
Stats 3985.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1108719 bytes_read=1415262 bytes_retransmit=0 bytes_invalid=0 send_seq=45533 receive_seq=45533 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=22588 bytes_read=71457 bytes_retransmit=0 bytes_invalid=0 send_seq=3739 receive_seq=3739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999725 adj=49999303 sd_pos=128261 heater_bed: target=60 temp=60.1 pwm=0.056 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.93 cputime=377.524 memavail=696560 print_time=3988.815 buffer_time=2.629 print_stall=0 extruder: target=220 temp=220.2 pwm=0.317
Stats 3986.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1109609 bytes_read=1415798 bytes_retransmit=0 bytes_invalid=0 send_seq=45560 receive_seq=45560 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001374 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22594 bytes_read=71486 bytes_retransmit=0 bytes_invalid=0 send_seq=3740 receive_seq=3740 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999728 adj=49999294 sd_pos=128315 heater_bed: target=60 temp=60.1 pwm=0.056 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.93 cputime=377.644 memavail=697432 print_time=3990.567 buffer_time=3.381 print_stall=0 extruder: target=220 temp=220.2 pwm=0.317
Stats 3987.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1109821 bytes_read=1416318 bytes_retransmit=0 bytes_invalid=0 send_seq=45575 receive_seq=45575 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001383 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22600 bytes_read=71502 bytes_retransmit=0 bytes_invalid=0 send_seq=3741 receive_seq=3741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999353 sd_pos=128315 heater_bed: target=60 temp=60.2 pwm=0.056 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=0.93 cputime=377.728 memavail=697432 print_time=3990.567 buffer_time=2.375 print_stall=0 extruder: target=220 temp=220.2 pwm=0.317
Stats 3988.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1110643 bytes_read=1416878 bytes_retransmit=0 bytes_invalid=0 send_seq=45602 receive_seq=45602 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22606 bytes_read=71518 bytes_retransmit=0 bytes_invalid=0 send_seq=3742 receive_seq=3742 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999298 sd_pos=128373 heater_bed: target=60 temp=60.2 pwm=0.108 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.93 cputime=377.852 memavail=697156 print_time=3992.321 buffer_time=3.124 print_stall=0 extruder: target=220 temp=220.2 pwm=0.302
Stats 3989.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=1110855 bytes_read=1417354 bytes_retransmit=0 bytes_invalid=0 send_seq=45617 receive_seq=45617 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22612 bytes_read=71534 bytes_retransmit=0 bytes_invalid=0 send_seq=3743 receive_seq=3743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999722 adj=49999332 sd_pos=128373 heater_bed: target=60 temp=60.2 pwm=0.108 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=0.93 cputime=377.969 memavail=697180 print_time=3992.321 buffer_time=2.122 print_stall=0 extruder: target=220 temp=220.2 pwm=0.302
Stats 3990.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1111665 bytes_read=1417934 bytes_retransmit=0 bytes_invalid=0 send_seq=45641 receive_seq=45641 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22618 bytes_read=71550 bytes_retransmit=0 bytes_invalid=0 send_seq=3744 receive_seq=3744 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999720 adj=49999331 sd_pos=128427 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.93 cputime=378.098 memavail=697180 print_time=3994.058 buffer_time=2.856 print_stall=0 extruder: target=220 temp=220.1 pwm=0.358
Stats 3991.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1112413 bytes_read=1418469 bytes_retransmit=0 bytes_invalid=0 send_seq=45665 receive_seq=45665 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=22624 bytes_read=71579 bytes_retransmit=0 bytes_invalid=0 send_seq=3745 receive_seq=3745 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999718 adj=49999317 sd_pos=128486 heater_bed: target=60 temp=60.1 pwm=0.100 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.7 sysload=0.93 cputime=378.221 memavail=697180 print_time=3995.777 buffer_time=3.569 print_stall=0 extruder: target=220 temp=220.0 pwm=0.358
Stats 3992.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1112656 bytes_read=1418955 bytes_retransmit=0 bytes_invalid=0 send_seq=45682 receive_seq=45682 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=22630 bytes_read=71595 bytes_retransmit=0 bytes_invalid=0 send_seq=3746 receive_seq=3746 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999323 sd_pos=128486 heater_bed: target=60 temp=60.1 pwm=0.097 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.7 sysload=0.93 cputime=378.337 memavail=697192 print_time=3995.777 buffer_time=2.567 print_stall=0 extruder: target=220 temp=219.9 pwm=0.358
Stats 3993.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1113374 bytes_read=1419530 bytes_retransmit=0 bytes_invalid=0 send_seq=45706 receive_seq=45706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=22636 bytes_read=71611 bytes_retransmit=0 bytes_invalid=0 send_seq=3747 receive_seq=3747 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999311 sd_pos=128541 heater_bed: target=60 temp=60.2 pwm=0.085 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=0.93 cputime=378.466 memavail=697192 print_time=3997.477 buffer_time=3.264 print_stall=0 extruder: target=220 temp=219.8 pwm=0.358
Stats 3994.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1113602 bytes_read=1420025 bytes_retransmit=0 bytes_invalid=0 send_seq=45722 receive_seq=45722 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=22642 bytes_read=71627 bytes_retransmit=0 bytes_invalid=0 send_seq=3748 receive_seq=3748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999329 sd_pos=128541 heater_bed: target=60 temp=60.2 pwm=0.085 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.02 cputime=378.587 memavail=696888 print_time=3997.477 buffer_time=2.261 print_stall=0 extruder: target=220 temp=219.9 pwm=0.355
Stats 3995.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=1114309 bytes_read=1420556 bytes_retransmit=0 bytes_invalid=0 send_seq=45745 receive_seq=45745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=22648 bytes_read=71643 bytes_retransmit=0 bytes_invalid=0 send_seq=3749 receive_seq=3749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999330 sd_pos=128600 heater_bed: target=60 temp=60.2 pwm=0.033 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=378.695 memavail=696952 print_time=3999.158 buffer_time=2.938 print_stall=0 extruder: target=220 temp=219.9 pwm=0.355
Stats 3996.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=1115104 bytes_read=1421136 bytes_retransmit=0 bytes_invalid=0 send_seq=45772 receive_seq=45772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001383 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22654 bytes_read=71672 bytes_retransmit=0 bytes_invalid=0 send_seq=3750 receive_seq=3750 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999326 sd_pos=128652 heater_bed: target=60 temp=60.1 pwm=0.107 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=378.824 memavail=696424 print_time=4000.820 buffer_time=3.598 print_stall=0 extruder: target=220 temp=220.0 pwm=0.298
Stats 3997.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=1115348 bytes_read=1421626 bytes_retransmit=0 bytes_invalid=0 send_seq=45787 receive_seq=45787 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22660 bytes_read=71688 bytes_retransmit=0 bytes_invalid=0 send_seq=3751 receive_seq=3751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999266 sd_pos=128652 heater_bed: target=60 temp=60.2 pwm=0.107 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.02 cputime=378.935 memavail=696720 print_time=4000.820 buffer_time=2.594 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
Stats 3998.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=1116208 bytes_read=1422192 bytes_retransmit=0 bytes_invalid=0 send_seq=45815 receive_seq=45815 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22666 bytes_read=71704 bytes_retransmit=0 bytes_invalid=0 send_seq=3752 receive_seq=3752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999712 adj=49999224 sd_pos=128710 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.02 cputime=379.073 memavail=696704 print_time=4002.465 buffer_time=3.236 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
Stats 3999.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=1116431 bytes_read=1422711 bytes_retransmit=0 bytes_invalid=0 send_seq=45830 receive_seq=45830 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001376 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22672 bytes_read=71720 bytes_retransmit=0 bytes_invalid=0 send_seq=3753 receive_seq=3753 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999241 sd_pos=128710 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.02 cputime=379.193 memavail=696704 print_time=4002.465 buffer_time=2.230 print_stall=0 extruder: target=220 temp=220.1 pwm=0.298
Stats 4000.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1117254 bytes_read=1423257 bytes_retransmit=0 bytes_invalid=0 send_seq=45856 receive_seq=45856 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22678 bytes_read=71736 bytes_retransmit=0 bytes_invalid=0 send_seq=3754 receive_seq=3754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999251 sd_pos=128765 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.02 cputime=379.323 memavail=696356 print_time=4004.095 buffer_time=2.853 print_stall=0 extruder: target=220 temp=219.8 pwm=0.372
Stats 4001.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1118076 bytes_read=1423798 bytes_retransmit=0 bytes_invalid=0 send_seq=45881 receive_seq=45881 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22684 bytes_read=71765 bytes_retransmit=0 bytes_invalid=0 send_seq=3755 receive_seq=3755 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999250 sd_pos=128852 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=22.5 sysload=1.02 cputime=379.451 memavail=696464 print_time=4005.721 buffer_time=3.475 print_stall=0 extruder: target=220 temp=219.7 pwm=0.372
Stats 4002.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1118304 bytes_read=1424322 bytes_retransmit=0 bytes_invalid=0 send_seq=45897 receive_seq=45897 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22690 bytes_read=71781 bytes_retransmit=0 bytes_invalid=0 send_seq=3756 receive_seq=3756 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999303 sd_pos=128852 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=379.566 memavail=696464 print_time=4005.721 buffer_time=2.471 print_stall=0 extruder: target=220 temp=219.6 pwm=0.428
Stats 4003.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1119259 bytes_read=1424883 bytes_retransmit=0 bytes_invalid=0 send_seq=45927 receive_seq=45927 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22696 bytes_read=71796 bytes_retransmit=0 bytes_invalid=0 send_seq=3757 receive_seq=3757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999316 sd_pos=128907 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.02 cputime=379.701 memavail=696012 print_time=4007.311 buffer_time=3.058 print_stall=0 extruder: target=220 temp=219.7 pwm=0.370
Stats 4004.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1119471 bytes_read=1425374 bytes_retransmit=0 bytes_invalid=0 send_seq=45942 receive_seq=45942 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22702 bytes_read=71811 bytes_retransmit=0 bytes_invalid=0 send_seq=3758 receive_seq=3758 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999344 sd_pos=128907 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=379.824 memavail=696212 print_time=4007.311 buffer_time=2.055 print_stall=0 extruder: target=220 temp=219.8 pwm=0.370
Stats 4005.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1120333 bytes_read=1425958 bytes_retransmit=0 bytes_invalid=0 send_seq=45967 receive_seq=45967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=22708 bytes_read=71826 bytes_retransmit=0 bytes_invalid=0 send_seq=3759 receive_seq=3759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999365 sd_pos=128966 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=379.949 memavail=696212 print_time=4008.884 buffer_time=2.621 print_stall=0 extruder: target=220 temp=220.0 pwm=0.308
Stats 4006.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1121150 bytes_read=1426484 bytes_retransmit=0 bytes_invalid=0 send_seq=45992 receive_seq=45992 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22714 bytes_read=71854 bytes_retransmit=0 bytes_invalid=0 send_seq=3760 receive_seq=3760 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999384 sd_pos=129021 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=380.074 memavail=696372 print_time=4010.437 buffer_time=3.174 print_stall=0 extruder: target=220 temp=220.3 pwm=0.243
Stats 4007.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1121441 bytes_read=1427025 bytes_retransmit=0 bytes_invalid=0 send_seq=46010 receive_seq=46010 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22726 bytes_read=71885 bytes_retransmit=0 bytes_invalid=0 send_seq=3762 receive_seq=3762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999302 sd_pos=129021 heater_bed: target=60 temp=60.1 pwm=0.041 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.8 sysload=1.02 cputime=380.172 memavail=696480 print_time=4010.437 buffer_time=2.169 print_stall=0 extruder: target=220 temp=220.4 pwm=0.243
Stats 4008.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1122289 bytes_read=1427571 bytes_retransmit=0 bytes_invalid=0 send_seq=46037 receive_seq=46037 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22732 bytes_read=71901 bytes_retransmit=0 bytes_invalid=0 send_seq=3763 receive_seq=3763 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999340 sd_pos=129080 heater_bed: target=60 temp=60.1 pwm=0.041 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=380.299 memavail=696480 print_time=4011.972 buffer_time=2.701 print_stall=0 extruder: target=220 temp=220.3 pwm=0.301
Stats 4009.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1123086 bytes_read=1428095 bytes_retransmit=0 bytes_invalid=0 send_seq=46062 receive_seq=46062 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22738 bytes_read=71917 bytes_retransmit=0 bytes_invalid=0 send_seq=3764 receive_seq=3764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999335 sd_pos=129133 heater_bed: target=60 temp=60.1 pwm=0.041 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.02 cputime=380.429 memavail=696240 print_time=4013.490 buffer_time=3.217 print_stall=0 extruder: target=220 temp=220.1 pwm=0.353
Stats 4010.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1123314 bytes_read=1428635 bytes_retransmit=0 bytes_invalid=0 send_seq=46078 receive_seq=46078 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22744 bytes_read=71933 bytes_retransmit=0 bytes_invalid=0 send_seq=3765 receive_seq=3765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999337 sd_pos=129133 heater_bed: target=60 temp=60.1 pwm=0.041 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=380.544 memavail=696240 print_time=4013.490 buffer_time=2.212 print_stall=0 extruder: target=220 temp=219.9 pwm=0.411
Stats 4011.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1124200 bytes_read=1429185 bytes_retransmit=0 bytes_invalid=0 send_seq=46105 receive_seq=46105 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22750 bytes_read=71962 bytes_retransmit=0 bytes_invalid=0 send_seq=3766 receive_seq=3766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999382 sd_pos=129192 heater_bed: target=60 temp=60.1 pwm=0.094 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.02 cputime=380.682 memavail=696240 print_time=4014.992 buffer_time=2.712 print_stall=0 extruder: target=220 temp=219.8 pwm=0.411
Stats 4012.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1125014 bytes_read=1429711 bytes_retransmit=0 bytes_invalid=0 send_seq=46130 receive_seq=46130 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22756 bytes_read=71978 bytes_retransmit=0 bytes_invalid=0 send_seq=3767 receive_seq=3767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999391 sd_pos=129247 heater_bed: target=60 temp=60.0 pwm=0.094 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.02 cputime=380.794 memavail=695860 print_time=4016.480 buffer_time=3.198 print_stall=0 extruder: target=220 temp=219.7 pwm=0.411
Stats 4013.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1125316 bytes_read=1430246 bytes_retransmit=0 bytes_invalid=0 send_seq=46148 receive_seq=46148 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22762 bytes_read=71994 bytes_retransmit=0 bytes_invalid=0 send_seq=3768 receive_seq=3768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999383 sd_pos=129247 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.02 cputime=380.920 memavail=695988 print_time=4016.480 buffer_time=2.193 print_stall=0 extruder: target=220 temp=219.9 pwm=0.359
Stats 4014.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=1126162 bytes_read=1430806 bytes_retransmit=0 bytes_invalid=0 send_seq=46175 receive_seq=46175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22768 bytes_read=72010 bytes_retransmit=0 bytes_invalid=0 send_seq=3769 receive_seq=3769 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999390 sd_pos=129306 heater_bed: target=60 temp=60.0 pwm=0.092 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=381.038 memavail=695220 print_time=4017.955 buffer_time=2.667 print_stall=0 extruder: target=220 temp=220.1 pwm=0.300
Stats 4015.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1127000 bytes_read=1431352 bytes_retransmit=0 bytes_invalid=0 send_seq=46201 receive_seq=46201 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22774 bytes_read=72026 bytes_retransmit=0 bytes_invalid=0 send_seq=3770 receive_seq=3770 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999398 sd_pos=129361 heater_bed: target=60 temp=60.1 pwm=0.004 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.01 cputime=381.147 memavail=695496 print_time=4019.416 buffer_time=3.126 print_stall=0 extruder: target=220 temp=220.3 pwm=0.300
Stats 4016.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1127306 bytes_read=1431892 bytes_retransmit=0 bytes_invalid=0 send_seq=46220 receive_seq=46220 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22780 bytes_read=72055 bytes_retransmit=0 bytes_invalid=0 send_seq=3771 receive_seq=3771 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999393 sd_pos=129361 heater_bed: target=60 temp=60.1 pwm=0.078 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.01 cputime=381.261 memavail=695660 print_time=4019.416 buffer_time=2.121 print_stall=0 extruder: target=220 temp=220.5 pwm=0.248
Stats 4017.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1128089 bytes_read=1432427 bytes_retransmit=0 bytes_invalid=0 send_seq=46244 receive_seq=46244 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22786 bytes_read=72071 bytes_retransmit=0 bytes_invalid=0 send_seq=3772 receive_seq=3772 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999420 sd_pos=129420 heater_bed: target=60 temp=60.1 pwm=0.078 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=381.385 memavail=695748 print_time=4020.866 buffer_time=2.568 print_stall=0 extruder: target=220 temp=220.5 pwm=0.248
Stats 4018.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1128884 bytes_read=1432968 bytes_retransmit=0 bytes_invalid=0 send_seq=46270 receive_seq=46270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001269 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22792 bytes_read=72087 bytes_retransmit=0 bytes_invalid=0 send_seq=3773 receive_seq=3773 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999420 sd_pos=129473 heater_bed: target=60 temp=60.1 pwm=0.070 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=381.514 memavail=695644 print_time=4022.305 buffer_time=3.005 print_stall=0 extruder: target=220 temp=220.3 pwm=0.299
Stats 4019.1: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=1129211 bytes_read=1433508 bytes_retransmit=0 bytes_invalid=0 send_seq=46289 receive_seq=46289 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001266 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22798 bytes_read=72103 bytes_retransmit=0 bytes_invalid=0 send_seq=3774 receive_seq=3774 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999706 adj=49999430 sd_pos=129473 heater_bed: target=60 temp=60.1 pwm=0.070 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.7 sysload=1.01 cputime=381.629 memavail=695748 print_time=4022.305 buffer_time=2.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.355
Stats 4020.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1129997 bytes_read=1434063 bytes_retransmit=0 bytes_invalid=0 send_seq=46314 receive_seq=46314 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001269 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22804 bytes_read=72119 bytes_retransmit=0 bytes_invalid=0 send_seq=3775 receive_seq=3775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999436 sd_pos=129560 heater_bed: target=60 temp=60.0 pwm=0.145 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.01 cputime=381.757 memavail=695748 print_time=4023.736 buffer_time=2.427 print_stall=0 extruder: target=220 temp=219.8 pwm=0.415
Stats 4021.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1130795 bytes_read=1434584 bytes_retransmit=0 bytes_invalid=0 send_seq=46338 receive_seq=46338 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=22810 bytes_read=72135 bytes_retransmit=0 bytes_invalid=0 send_seq=3776 receive_seq=3776 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999718 adj=49999543 sd_pos=129626 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=381.886 memavail=695644 print_time=4025.131 buffer_time=2.820 print_stall=0 extruder: target=220 temp=219.6 pwm=0.415
Stats 4022.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1131633 bytes_read=1435154 bytes_retransmit=0 bytes_invalid=0 send_seq=46363 receive_seq=46363 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001277 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22816 bytes_read=72164 bytes_retransmit=0 bytes_invalid=0 send_seq=3777 receive_seq=3777 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999718 adj=49999481 sd_pos=129682 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=382.014 memavail=695644 print_time=4026.516 buffer_time=3.201 print_stall=0 extruder: target=220 temp=219.6 pwm=0.415
Stats 4023.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1131908 bytes_read=1435654 bytes_retransmit=0 bytes_invalid=0 send_seq=46380 receive_seq=46380 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22822 bytes_read=72180 bytes_retransmit=0 bytes_invalid=0 send_seq=3778 receive_seq=3778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999728 adj=49999446 sd_pos=129682 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.7 sysload=1.01 cputime=382.133 memavail=695760 print_time=4026.516 buffer_time=2.198 print_stall=0 extruder: target=220 temp=219.7 pwm=0.356
Stats 4024.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1132691 bytes_read=1436190 bytes_retransmit=0 bytes_invalid=0 send_seq=46405 receive_seq=46405 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22828 bytes_read=72196 bytes_retransmit=0 bytes_invalid=0 send_seq=3779 receive_seq=3779 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999734 adj=49999521 sd_pos=129736 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.01 cputime=382.270 memavail=695520 print_time=4027.882 buffer_time=2.562 print_stall=0 extruder: target=220 temp=220.0 pwm=0.289
Stats 4025.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1133526 bytes_read=1436780 bytes_retransmit=0 bytes_invalid=0 send_seq=46431 receive_seq=46431 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22834 bytes_read=72212 bytes_retransmit=0 bytes_invalid=0 send_seq=3780 receive_seq=3780 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999730 adj=49999568 sd_pos=129794 heater_bed: target=60 temp=60.1 pwm=0.040 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=382.402 memavail=695520 print_time=4029.230 buffer_time=2.907 print_stall=0 extruder: target=220 temp=220.1 pwm=0.289
Stats 4026.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1134383 bytes_read=1437330 bytes_retransmit=0 bytes_invalid=0 send_seq=46458 receive_seq=46458 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=22840 bytes_read=72228 bytes_retransmit=0 bytes_invalid=0 send_seq=3781 receive_seq=3781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999729 adj=49999507 sd_pos=129846 heater_bed: target=60 temp=60.1 pwm=0.040 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=22.4 sysload=1.01 cputime=382.539 memavail=696484 print_time=4030.551 buffer_time=3.225 print_stall=0 extruder: target=220 temp=220.3 pwm=0.289
Stats 4027.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1134634 bytes_read=1437831 bytes_retransmit=0 bytes_invalid=0 send_seq=46475 receive_seq=46475 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22846 bytes_read=72257 bytes_retransmit=0 bytes_invalid=0 send_seq=3782 receive_seq=3782 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999726 adj=49999458 sd_pos=129846 heater_bed: target=60 temp=60.1 pwm=0.044 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.01 cputime=382.652 memavail=696276 print_time=4030.551 buffer_time=2.219 print_stall=0 extruder: target=220 temp=220.4 pwm=0.289
Stats 4028.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1135545 bytes_read=1438425 bytes_retransmit=0 bytes_invalid=0 send_seq=46503 receive_seq=46503 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001273 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22852 bytes_read=72273 bytes_retransmit=0 bytes_invalid=0 send_seq=3783 receive_seq=3783 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999438 sd_pos=129903 heater_bed: target=60 temp=60.1 pwm=0.044 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=382.793 memavail=696276 print_time=4031.844 buffer_time=2.508 print_stall=0 extruder: target=220 temp=220.2 pwm=0.318
Stats 4029.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1136325 bytes_read=1438946 bytes_retransmit=0 bytes_invalid=0 send_seq=46527 receive_seq=46527 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22858 bytes_read=72289 bytes_retransmit=0 bytes_invalid=0 send_seq=3784 receive_seq=3784 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999726 adj=49999425 sd_pos=129957 heater_bed: target=60 temp=60.1 pwm=0.044 raspberry_pi: temp=39.7 mcu_temp: temp=37.5 chamber: temp=22.6 sysload=1.01 cputime=382.930 memavail=696276 print_time=4033.110 buffer_time=2.772 print_stall=0 extruder: target=220 temp=220.1 pwm=0.318
Stats 4030.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1137096 bytes_read=1439502 bytes_retransmit=0 bytes_invalid=0 send_seq=46552 receive_seq=46552 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22864 bytes_read=72305 bytes_retransmit=0 bytes_invalid=0 send_seq=3785 receive_seq=3785 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999406 sd_pos=130015 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=383.054 memavail=696288 print_time=4034.349 buffer_time=3.009 print_stall=0 extruder: target=220 temp=219.8 pwm=0.372
Stats 4031.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1137323 bytes_read=1440018 bytes_retransmit=0 bytes_invalid=0 send_seq=46568 receive_seq=46568 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=22870 bytes_read=72321 bytes_retransmit=0 bytes_invalid=0 send_seq=3786 receive_seq=3786 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999724 adj=49999373 sd_pos=130015 heater_bed: target=60 temp=60.1 pwm=0.040 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=383.176 memavail=696288 print_time=4034.349 buffer_time=2.005 print_stall=0 extruder: target=220 temp=219.7 pwm=0.372
Stats 4032.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1138233 bytes_read=1440546 bytes_retransmit=0 bytes_invalid=0 send_seq=46596 receive_seq=46596 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=22876 bytes_read=72350 bytes_retransmit=0 bytes_invalid=0 send_seq=3787 receive_seq=3787 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999723 adj=49999383 sd_pos=130069 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=383.315 memavail=696288 print_time=4035.564 buffer_time=2.217 print_stall=0 extruder: target=220 temp=219.6 pwm=0.372
Stats 4033.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1139078 bytes_read=1441092 bytes_retransmit=0 bytes_invalid=0 send_seq=46622 receive_seq=46622 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=22882 bytes_read=72366 bytes_retransmit=0 bytes_invalid=0 send_seq=3788 receive_seq=3788 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999721 adj=49999375 sd_pos=130126 heater_bed: target=60 temp=60.0 pwm=0.072 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.01 cputime=383.448 memavail=696292 print_time=4036.758 buffer_time=2.406 print_stall=0 extruder: target=220 temp=219.8 pwm=0.372
Stats 4034.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1139911 bytes_read=1441681 bytes_retransmit=0 bytes_invalid=0 send_seq=46649 receive_seq=46649 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=22888 bytes_read=72382 bytes_retransmit=0 bytes_invalid=0 send_seq=3789 receive_seq=3789 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999720 adj=49999337 sd_pos=130180 heater_bed: target=60 temp=60.0 pwm=0.072 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=1.01 cputime=383.586 memavail=696292 print_time=4037.929 buffer_time=2.575 print_stall=0 extruder: target=220 temp=219.8 pwm=0.341
Stats 4035.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1140703 bytes_read=1442217 bytes_retransmit=0 bytes_invalid=0 send_seq=46673 receive_seq=46673 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=22894 bytes_read=72398 bytes_retransmit=0 bytes_invalid=0 send_seq=3790 receive_seq=3790 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999719 adj=49999324 sd_pos=130238 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=383.727 memavail=696292 print_time=4039.080 buffer_time=2.723 print_stall=0 extruder: target=220 temp=219.9 pwm=0.341
Stats 4036.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1141527 bytes_read=1442763 bytes_retransmit=0 bytes_invalid=0 send_seq=46699 receive_seq=46699 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=22900 bytes_read=72414 bytes_retransmit=0 bytes_invalid=0 send_seq=3791 receive_seq=3791 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999722 adj=49999325 sd_pos=130292 heater_bed: target=60 temp=60.0 pwm=0.121 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.01 cputime=383.846 memavail=696336 print_time=4040.209 buffer_time=2.851 print_stall=0 extruder: target=220 temp=220.1 pwm=0.341
Stats 4037.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1142373 bytes_read=1443342 bytes_retransmit=0 bytes_invalid=0 send_seq=46726 receive_seq=46726 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22906 bytes_read=72443 bytes_retransmit=0 bytes_invalid=0 send_seq=3792 receive_seq=3792 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999370 sd_pos=130350 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.5 sysload=1.01 cputime=383.951 memavail=696548 print_time=4041.317 buffer_time=2.952 print_stall=0 extruder: target=220 temp=220.2 pwm=0.341
Stats 4038.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1143146 bytes_read=1443873 bytes_retransmit=0 bytes_invalid=0 send_seq=46752 receive_seq=46752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22912 bytes_read=72459 bytes_retransmit=0 bytes_invalid=0 send_seq=3793 receive_seq=3793 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999717 adj=49999338 sd_pos=130404 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.5 sysload=1.01 cputime=384.083 memavail=696548 print_time=4042.404 buffer_time=3.036 print_stall=0 extruder: target=220 temp=220.2 pwm=0.318
Stats 4039.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1143473 bytes_read=1444418 bytes_retransmit=0 bytes_invalid=0 send_seq=46770 receive_seq=46770 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001275 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22918 bytes_read=72475 bytes_retransmit=0 bytes_invalid=0 send_seq=3794 receive_seq=3794 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999716 adj=49999342 sd_pos=130404 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.7 sysload=1.01 cputime=384.203 memavail=695852 print_time=4042.404 buffer_time=2.026 print_stall=0 extruder: target=220 temp=220.3 pwm=0.318
Stats 4040.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1144242 bytes_read=1444968 bytes_retransmit=0 bytes_invalid=0 send_seq=46794 receive_seq=46794 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001273 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22924 bytes_read=72491 bytes_retransmit=0 bytes_invalid=0 send_seq=3795 receive_seq=3795 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999714 adj=49999344 sd_pos=130462 heater_bed: target=60 temp=59.9 pwm=0.070 raspberry_pi: temp=39.7 mcu_temp: temp=37.5 chamber: temp=22.6 sysload=1.01 cputime=384.331 memavail=696048 print_time=4043.470 buffer_time=2.091 print_stall=0 extruder: target=220 temp=220.2 pwm=0.318
Stats 4041.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1145023 bytes_read=1445489 bytes_retransmit=0 bytes_invalid=0 send_seq=46818 receive_seq=46818 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001276 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22930 bytes_read=72507 bytes_retransmit=0 bytes_invalid=0 send_seq=3796 receive_seq=3796 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999712 adj=49999329 sd_pos=130518 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=384.456 memavail=696048 print_time=4044.513 buffer_time=2.133 print_stall=0 extruder: target=220 temp=220.1 pwm=0.318
Stats 4042.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1145780 bytes_read=1446049 bytes_retransmit=0 bytes_invalid=0 send_seq=46841 receive_seq=46841 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22936 bytes_read=72536 bytes_retransmit=0 bytes_invalid=0 send_seq=3797 receive_seq=3797 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999291 sd_pos=130576 heater_bed: target=60 temp=59.9 pwm=0.084 raspberry_pi: temp=39.7 mcu_temp: temp=37.5 chamber: temp=22.6 sysload=1.01 cputime=384.580 memavail=696164 print_time=4045.535 buffer_time=2.154 print_stall=0 extruder: target=220 temp=220.1 pwm=0.330
Stats 4043.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1146493 bytes_read=1446579 bytes_retransmit=0 bytes_invalid=0 send_seq=46864 receive_seq=46864 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22942 bytes_read=72552 bytes_retransmit=0 bytes_invalid=0 send_seq=3798 receive_seq=3798 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999710 adj=49999267 sd_pos=130632 heater_bed: target=60 temp=59.9 pwm=0.084 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=384.710 memavail=696308 print_time=4046.534 buffer_time=2.151 print_stall=0 extruder: target=220 temp=220.0 pwm=0.330
Stats 4044.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=1147234 bytes_read=1447110 bytes_retransmit=0 bytes_invalid=0 send_seq=46888 receive_seq=46888 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22948 bytes_read=72568 bytes_retransmit=0 bytes_invalid=0 send_seq=3799 receive_seq=3799 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999265 sd_pos=130690 heater_bed: target=60 temp=59.9 pwm=0.147 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=384.838 memavail=696308 print_time=4047.514 buffer_time=2.128 print_stall=0 extruder: target=220 temp=219.9 pwm=0.330
Stats 4045.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1147946 bytes_read=1447685 bytes_retransmit=0 bytes_invalid=0 send_seq=46911 receive_seq=46911 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22954 bytes_read=72584 bytes_retransmit=0 bytes_invalid=0 send_seq=3800 receive_seq=3800 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999709 adj=49999258 sd_pos=130746 heater_bed: target=60 temp=59.8 pwm=0.147 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=384.965 memavail=696504 print_time=4048.476 buffer_time=2.087 print_stall=0 extruder: target=220 temp=219.8 pwm=0.330
Stats 4046.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1148707 bytes_read=1448225 bytes_retransmit=0 bytes_invalid=0 send_seq=46936 receive_seq=46936 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=22960 bytes_read=72600 bytes_retransmit=0 bytes_invalid=0 send_seq=3801 receive_seq=3801 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999711 adj=49999270 sd_pos=130804 heater_bed: target=60 temp=59.9 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=1.01 cputime=385.098 memavail=696308 print_time=4049.421 buffer_time=2.028 print_stall=0 extruder: target=220 temp=219.8 pwm=0.370
Stats 4047.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1149917 bytes_read=1448781 bytes_retransmit=0 bytes_invalid=0 send_seq=46967 receive_seq=46967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001390 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22966 bytes_read=72629 bytes_retransmit=0 bytes_invalid=0 send_seq=3802 receive_seq=3802 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999707 adj=49999285 sd_pos=130916 heater_bed: target=60 temp=59.8 pwm=0.090 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=22.6 sysload=1.01 cputime=385.213 memavail=696308 print_time=4051.263 buffer_time=2.867 print_stall=0 extruder: target=220 temp=219.8 pwm=0.370
Stats 4048.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1150645 bytes_read=1449341 bytes_retransmit=0 bytes_invalid=0 send_seq=46990 receive_seq=46990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001390 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22972 bytes_read=72645 bytes_retransmit=0 bytes_invalid=0 send_seq=3803 receive_seq=3803 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999708 adj=49999025 sd_pos=130971 heater_bed: target=60 temp=59.9 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.93 cputime=385.339 memavail=696316 print_time=4052.162 buffer_time=2.765 print_stall=0 extruder: target=220 temp=219.8 pwm=0.370
Stats 4049.2: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000008 mcu_task_stddev=0.000009 bytes_write=1151480 bytes_read=1449901 bytes_retransmit=0 bytes_invalid=0 send_seq=47017 receive_seq=47017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22978 bytes_read=72661 bytes_retransmit=0 bytes_invalid=0 send_seq=3804 receive_seq=3804 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999060 sd_pos=131028 heater_bed: target=60 temp=59.8 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=0.93 cputime=385.469 memavail=696316 print_time=4053.050 buffer_time=2.649 print_stall=0 extruder: target=220 temp=219.8 pwm=0.370
Stats 4050.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1152241 bytes_read=1450437 bytes_retransmit=0 bytes_invalid=0 send_seq=47041 receive_seq=47041 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22984 bytes_read=72677 bytes_retransmit=0 bytes_invalid=0 send_seq=3805 receive_seq=3805 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999088 sd_pos=131112 heater_bed: target=60 temp=59.8 pwm=0.166 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.8 sysload=0.93 cputime=385.600 memavail=696316 print_time=4053.869 buffer_time=2.466 print_stall=0 extruder: target=220 temp=219.9 pwm=0.370
Stats 4051.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1153142 bytes_read=1451022 bytes_retransmit=0 bytes_invalid=0 send_seq=47069 receive_seq=47069 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22990 bytes_read=72693 bytes_retransmit=0 bytes_invalid=0 send_seq=3806 receive_seq=3806 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999704 adj=49999112 sd_pos=131197 heater_bed: target=60 temp=59.8 pwm=0.168 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.93 cputime=385.729 memavail=696568 print_time=4054.680 buffer_time=2.274 print_stall=0 extruder: target=220 temp=220.0 pwm=0.347
Stats 4052.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1153900 bytes_read=1451562 bytes_retransmit=0 bytes_invalid=0 send_seq=47094 receive_seq=47094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=22996 bytes_read=72722 bytes_retransmit=0 bytes_invalid=0 send_seq=3807 receive_seq=3807 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999703 adj=49999163 sd_pos=131252 heater_bed: target=60 temp=59.8 pwm=0.110 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.7 sysload=0.93 cputime=385.860 memavail=696568 print_time=4055.432 buffer_time=2.023 print_stall=0 extruder: target=220 temp=220.2 pwm=0.289
Stats 4053.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1155199 bytes_read=1452118 bytes_retransmit=0 bytes_invalid=0 send_seq=47125 receive_seq=47125 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001344 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23002 bytes_read=72738 bytes_retransmit=0 bytes_invalid=0 send_seq=3808 receive_seq=3808 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999179 sd_pos=131365 heater_bed: target=60 temp=59.8 pwm=0.168 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.6 sysload=0.85 cputime=386.001 memavail=696568 print_time=4056.889 buffer_time=2.475 print_stall=0 extruder: target=220 temp=220.3 pwm=0.289
Stats 4054.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1155958 bytes_read=1452698 bytes_retransmit=0 bytes_invalid=0 send_seq=47150 receive_seq=47150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23008 bytes_read=72754 bytes_retransmit=0 bytes_invalid=0 send_seq=3809 receive_seq=3809 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999248 sd_pos=131422 heater_bed: target=60 temp=59.8 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.85 cputime=386.132 memavail=696328 print_time=4057.570 buffer_time=2.153 print_stall=0 extruder: target=220 temp=220.2 pwm=0.289
Stats 4055.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1157308 bytes_read=1453294 bytes_retransmit=0 bytes_invalid=0 send_seq=47185 receive_seq=47185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23014 bytes_read=72770 bytes_retransmit=0 bytes_invalid=0 send_seq=3810 receive_seq=3810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999697 adj=49999254 sd_pos=131531 heater_bed: target=60 temp=59.7 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=22.8 sysload=0.85 cputime=386.266 memavail=696328 print_time=4058.858 buffer_time=2.439 print_stall=0 extruder: target=220 temp=220.1 pwm=0.357
Stats 4056.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1158080 bytes_read=1453803 bytes_retransmit=0 bytes_invalid=0 send_seq=47209 receive_seq=47209 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23020 bytes_read=72786 bytes_retransmit=0 bytes_invalid=0 send_seq=3811 receive_seq=3811 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999278 sd_pos=131612 heater_bed: target=60 temp=59.8 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.85 cputime=386.386 memavail=696328 print_time=4059.477 buffer_time=2.055 print_stall=0 extruder: target=220 temp=219.9 pwm=0.357
Stats 4057.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1159314 bytes_read=1454403 bytes_retransmit=0 bytes_invalid=0 send_seq=47240 receive_seq=47240 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23026 bytes_read=72815 bytes_retransmit=0 bytes_invalid=0 send_seq=3812 receive_seq=3812 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999275 sd_pos=131724 heater_bed: target=60 temp=59.8 pwm=0.143 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.7 sysload=0.85 cputime=386.494 memavail=696336 print_time=4060.558 buffer_time=2.134 print_stall=0 extruder: target=220 temp=219.8 pwm=0.357
Stats 4058.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1160578 bytes_read=1454978 bytes_retransmit=0 bytes_invalid=0 send_seq=47272 receive_seq=47272 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23032 bytes_read=72831 bytes_retransmit=0 bytes_invalid=0 send_seq=3813 receive_seq=3813 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999317 sd_pos=131862 heater_bed: target=60 temp=59.8 pwm=0.143 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=22.7 sysload=0.78 cputime=386.625 memavail=696336 print_time=4061.534 buffer_time=2.106 print_stall=0 extruder: target=220 temp=219.8 pwm=0.357
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4059.2: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=1162186 bytes_read=1455594 bytes_retransmit=0 bytes_invalid=0 send_seq=47310 receive_seq=47310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23038 bytes_read=72847 bytes_retransmit=0 bytes_invalid=0 send_seq=3814 receive_seq=3814 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999346 sd_pos=132370 heater_bed: target=60 temp=59.8 pwm=0.081 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.78 cputime=386.852 memavail=696336 print_time=4062.546 buffer_time=2.117 print_stall=0 extruder: target=220 temp=219.7 pwm=0.357
Stats 4060.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1166407 bytes_read=1456458 bytes_retransmit=0 bytes_invalid=0 send_seq=47391 receive_seq=47391 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=10 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23044 bytes_read=72863 bytes_retransmit=0 bytes_invalid=0 send_seq=3815 receive_seq=3815 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999366 sd_pos=132824 heater_bed: target=60 temp=59.9 pwm=0.081 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=22.6 sysload=0.78 cputime=386.974 memavail=696340 print_time=4063.550 buffer_time=2.116 print_stall=0 extruder: target=220 temp=219.8 pwm=0.341
Stats 4061.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1168098 bytes_read=1457044 bytes_retransmit=0 bytes_invalid=0 send_seq=47429 receive_seq=47428 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23056 bytes_read=72895 bytes_retransmit=0 bytes_invalid=0 send_seq=3817 receive_seq=3817 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999354 sd_pos=133201 heater_bed: target=60 temp=59.9 pwm=0.081 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=22.8 sysload=0.78 cputime=387.123 memavail=696340 print_time=4064.784 buffer_time=2.347 print_stall=0 extruder: target=220 temp=219.9 pwm=0.341
Stats 4062.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1169491 bytes_read=1457646 bytes_retransmit=0 bytes_invalid=0 send_seq=47463 receive_seq=47463 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23062 bytes_read=72924 bytes_retransmit=0 bytes_invalid=0 send_seq=3818 receive_seq=3818 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999320 sd_pos=133504 heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=22.6 sysload=0.78 cputime=387.266 memavail=696340 print_time=4065.452 buffer_time=2.011 print_stall=0 extruder: target=220 temp=219.9 pwm=0.341
Stats 4063.2: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1171812 bytes_read=1458350 bytes_retransmit=0 bytes_invalid=0 send_seq=47513 receive_seq=47513 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23068 bytes_read=72940 bytes_retransmit=0 bytes_invalid=0 send_seq=3819 receive_seq=3819 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999316 sd_pos=134051 heater_bed: target=60 temp=59.8 pwm=0.135 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=22.7 sysload=0.72 cputime=387.434 memavail=696352 print_time=4066.824 buffer_time=2.381 print_stall=0 extruder: target=220 temp=220.0 pwm=0.341
Stats 4064.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=1173240 bytes_read=1458931 bytes_retransmit=0 bytes_invalid=0 send_seq=47549 receive_seq=47549 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23074 bytes_read=72956 bytes_retransmit=0 bytes_invalid=0 send_seq=3820 receive_seq=3820 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999361 sd_pos=134376 heater_bed: target=60 temp=59.8 pwm=0.143 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=22.8 sysload=0.72 cputime=387.589 memavail=696352 print_time=4067.549 buffer_time=2.102 print_stall=0 extruder: target=220 temp=220.1 pwm=0.332
Stats 4065.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1174729 bytes_read=1459537 bytes_retransmit=0 bytes_invalid=0 send_seq=47584 receive_seq=47584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23080 bytes_read=72972 bytes_retransmit=0 bytes_invalid=0 send_seq=3821 receive_seq=3821 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999383 sd_pos=134736 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=22.8 sysload=0.72 cputime=387.712 memavail=696352 print_time=4068.605 buffer_time=2.158 print_stall=0 extruder: target=220 temp=220.0 pwm=0.332
Stats 4066.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1176564 bytes_read=1460196 bytes_retransmit=0 bytes_invalid=0 send_seq=47625 receive_seq=47625 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23086 bytes_read=72988 bytes_retransmit=0 bytes_invalid=0 send_seq=3822 receive_seq=3822 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999359 sd_pos=135218 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=39.7 mcu_temp: temp=37.2 chamber: temp=23.0 sysload=0.72 cputime=387.867 memavail=696100 print_time=4069.636 buffer_time=2.184 print_stall=0 extruder: target=220 temp=219.8 pwm=0.383
Stats 4067.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1178417 bytes_read=1460807 bytes_retransmit=0 bytes_invalid=0 send_seq=47667 receive_seq=47667 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23092 bytes_read=73017 bytes_retransmit=0 bytes_invalid=0 send_seq=3823 receive_seq=3823 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999354 sd_pos=135557 heater_bed: target=60 temp=60.0 pwm=0.015 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=23.0 sysload=0.72 cputime=388.023 memavail=696100 print_time=4070.560 buffer_time=2.104 print_stall=0 extruder: target=220 temp=219.5 pwm=0.440
Stats 4068.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1180152 bytes_read=1461432 bytes_retransmit=0 bytes_invalid=0 send_seq=47706 receive_seq=47706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23098 bytes_read=73033 bytes_retransmit=0 bytes_invalid=0 send_seq=3824 receive_seq=3824 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999325 sd_pos=135947 heater_bed: target=60 temp=59.9 pwm=0.088 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=23.1 sysload=0.66 cputime=388.146 memavail=696100 print_time=4071.774 buffer_time=2.316 print_stall=0 extruder: target=220 temp=219.3 pwm=0.491
Stats 4069.3: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=1182082 bytes_read=1462092 bytes_retransmit=0 bytes_invalid=0 send_seq=47750 receive_seq=47750 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23104 bytes_read=73049 bytes_retransmit=0 bytes_invalid=0 send_seq=3825 receive_seq=3825 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999311 sd_pos=136455 heater_bed: target=60 temp=59.9 pwm=0.088 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=23.4 sysload=0.66 cputime=388.315 memavail=696112 print_time=4072.788 buffer_time=2.325 print_stall=0 extruder: target=220 temp=219.1 pwm=0.491
Stats 4070.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1183914 bytes_read=1462713 bytes_retransmit=0 bytes_invalid=0 send_seq=47791 receive_seq=47791 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23110 bytes_read=73065 bytes_retransmit=0 bytes_invalid=0 send_seq=3826 receive_seq=3826 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999334 sd_pos=136827 heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=23.5 sysload=0.66 cputime=388.475 memavail=696112 print_time=4073.796 buffer_time=2.330 print_stall=0 extruder: target=220 temp=218.9 pwm=0.545
Stats 4071.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1185346 bytes_read=1463343 bytes_retransmit=0 bytes_invalid=0 send_seq=47826 receive_seq=47826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=23116 bytes_read=73081 bytes_retransmit=0 bytes_invalid=0 send_seq=3827 receive_seq=3827 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999339 sd_pos=137099 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=23.8 sysload=0.66 cputime=388.625 memavail=696112 print_time=4074.463 buffer_time=1.993 print_stall=0 extruder: target=220 temp=219.0 pwm=0.545
Stats 4072.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1186845 bytes_read=1463938 bytes_retransmit=0 bytes_invalid=0 send_seq=47862 receive_seq=47862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23122 bytes_read=73110 bytes_retransmit=0 bytes_invalid=0 send_seq=3828 receive_seq=3828 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999363 sd_pos=137461 heater_bed: target=60 temp=59.9 pwm=0.127 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=24.0 sysload=0.66 cputime=388.776 memavail=696364 print_time=4075.529 buffer_time=2.049 print_stall=0 extruder: target=220 temp=219.2 pwm=0.455
Stats 4073.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1188609 bytes_read=1464549 bytes_retransmit=0 bytes_invalid=0 send_seq=47902 receive_seq=47902 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23128 bytes_read=73126 bytes_retransmit=0 bytes_invalid=0 send_seq=3829 receive_seq=3829 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999377 sd_pos=137914 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=40.2 mcu_temp: temp=37.4 chamber: temp=23.9 sysload=0.61 cputime=388.936 memavail=696364 print_time=4076.543 buffer_time=2.062 print_stall=0 extruder: target=220 temp=219.4 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4074.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1194614 bytes_read=1465539 bytes_retransmit=0 bytes_invalid=0 send_seq=48011 receive_seq=48011 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23134 bytes_read=73142 bytes_retransmit=0 bytes_invalid=0 send_seq=3830 receive_seq=3830 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999376 sd_pos=139550 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=24.3 sysload=0.61 cputime=389.196 memavail=696364 print_time=4078.032 buffer_time=2.550 print_stall=0 extruder: target=220 temp=219.6 pwm=0.455
Stats 4075.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1197706 bytes_read=1466270 bytes_retransmit=0 bytes_invalid=0 send_seq=48071 receive_seq=48071 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=220 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23140 bytes_read=73158 bytes_retransmit=0 bytes_invalid=0 send_seq=3831 receive_seq=3831 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999340 sd_pos=140806 heater_bed: target=60 temp=60.0 pwm=0.094 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=24.3 sysload=0.61 cputime=389.339 memavail=696376 print_time=4078.489 buffer_time=2.002 print_stall=0 extruder: target=220 temp=219.7 pwm=0.455
Stats 4076.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1200913 bytes_read=1466981 bytes_retransmit=0 bytes_invalid=0 send_seq=48131 receive_seq=48131 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=3152 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23146 bytes_read=73174 bytes_retransmit=0 bytes_invalid=0 send_seq=3832 receive_seq=3832 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999371 sd_pos=143524 heater_bed: target=60 temp=60.0 pwm=0.036 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=24.5 sysload=0.61 cputime=389.549 memavail=696124 print_time=4079.490 buffer_time=2.000 print_stall=0 extruder: target=220 temp=219.7 pwm=0.455
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4077.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1207361 bytes_read=1467971 bytes_retransmit=0 bytes_invalid=0 send_seq=48240 receive_seq=48240 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=4317 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23152 bytes_read=73203 bytes_retransmit=0 bytes_invalid=0 send_seq=3833 receive_seq=3833 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999329 sd_pos=146216 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=24.8 sysload=0.61 cputime=389.906 memavail=696124 print_time=4080.485 buffer_time=1.991 print_stall=0 extruder: target=220 temp=219.7 pwm=0.455
Stats 4078.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1214101 bytes_read=1468951 bytes_retransmit=0 bytes_invalid=0 send_seq=48353 receive_seq=48353 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=6383 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23158 bytes_read=73219 bytes_retransmit=0 bytes_invalid=0 send_seq=3834 receive_seq=3834 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999290 sd_pos=150016 heater_bed: target=60 temp=59.9 pwm=0.223 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=24.8 sysload=0.56 cputime=390.181 memavail=696128 print_time=4081.894 buffer_time=2.400 print_stall=0 extruder: target=220 temp=219.5 pwm=0.512
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4079.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1221669 bytes_read=1469993 bytes_retransmit=0 bytes_invalid=0 send_seq=48483 receive_seq=48482 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=6972 freq=180001272 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23164 bytes_read=73235 bytes_retransmit=0 bytes_invalid=0 send_seq=3835 receive_seq=3835 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999318 sd_pos=153153 heater_bed: target=60 temp=59.9 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.0 sysload=0.56 cputime=390.555 memavail=696128 print_time=4082.977 buffer_time=2.457 print_stall=0 extruder: target=220 temp=219.4 pwm=0.562
Stats 4080.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1227814 bytes_read=1470975 bytes_retransmit=0 bytes_invalid=0 send_seq=48588 receive_seq=48588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=5833 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23170 bytes_read=73251 bytes_retransmit=0 bytes_invalid=0 send_seq=3836 receive_seq=3836 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999311 sd_pos=155992 heater_bed: target=60 temp=60.0 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=25.0 sysload=0.56 cputime=390.752 memavail=696128 print_time=4083.726 buffer_time=2.204 print_stall=0 extruder: target=220 temp=219.4 pwm=0.562
Stats 4081.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1235584 bytes_read=1472045 bytes_retransmit=0 bytes_invalid=0 send_seq=48719 receive_seq=48719 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=5546 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23176 bytes_read=73267 bytes_retransmit=0 bytes_invalid=0 send_seq=3837 receive_seq=3837 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999262 sd_pos=158949 heater_bed: target=60 temp=59.9 pwm=0.192 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=25.0 sysload=0.56 cputime=391.016 memavail=696136 print_time=4084.793 buffer_time=2.271 print_stall=0 extruder: target=220 temp=219.4 pwm=0.562
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4082.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1242315 bytes_read=1473036 bytes_retransmit=0 bytes_invalid=0 send_seq=48835 receive_seq=48835 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 stalled_bytes=5672 freq=180001314 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23182 bytes_read=73296 bytes_retransmit=0 bytes_invalid=0 send_seq=3838 receive_seq=3838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999197 sd_pos=162269 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.2 sysload=0.56 cputime=391.339 memavail=696136 print_time=4085.831 buffer_time=2.305 print_stall=0 extruder: target=220 temp=219.5 pwm=0.505
Stats 4083.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1249101 bytes_read=1474061 bytes_retransmit=0 bytes_invalid=0 send_seq=48951 receive_seq=48951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=3372 freq=180001309 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23188 bytes_read=73312 bytes_retransmit=0 bytes_invalid=0 send_seq=3839 receive_seq=3839 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999243 sd_pos=164518 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.2 sysload=0.60 cputime=391.555 memavail=696136 print_time=4086.658 buffer_time=2.131 print_stall=0 extruder: target=220 temp=219.7 pwm=0.505
Stats 4084.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1256423 bytes_read=1475111 bytes_retransmit=0 bytes_invalid=0 send_seq=49076 receive_seq=49076 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=1568 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23194 bytes_read=73328 bytes_retransmit=0 bytes_invalid=0 send_seq=3840 receive_seq=3840 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999280 sd_pos=167491 heater_bed: target=60 temp=60.0 pwm=0.116 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.4 sysload=0.60 cputime=391.788 memavail=695888 print_time=4087.538 buffer_time=2.011 print_stall=0 extruder: target=220 temp=220.0 pwm=0.443
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
Stats 4085.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1261618 bytes_read=1475998 bytes_retransmit=0 bytes_invalid=0 send_seq=49167 receive_seq=49167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=3310 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23200 bytes_read=73344 bytes_retransmit=0 bytes_invalid=0 send_seq=3841 receive_seq=3841 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999239 sd_pos=169191 heater_bed: target=60 temp=60.0 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=25.2 sysload=0.60 cputime=392.090 memavail=695888 print_time=4088.579 buffer_time=2.051 print_stall=0 extruder: target=220 temp=220.1 pwm=0.443
Stats 4086.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1267908 bytes_read=1476977 bytes_retransmit=0 bytes_invalid=0 send_seq=49275 receive_seq=49274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=862 freq=180001321 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=23206 bytes_read=73360 bytes_retransmit=0 bytes_invalid=0 send_seq=3842 receive_seq=3842 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999237 sd_pos=169818 heater_bed: target=60 temp=60.0 pwm=0.050 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.5 sysload=0.60 cputime=392.262 memavail=696144 print_time=4089.647 buffer_time=2.117 print_stall=0 extruder: target=220 temp=220.2 pwm=0.443
Stats 4087.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1271416 bytes_read=1477718 bytes_retransmit=0 bytes_invalid=0 send_seq=49340 receive_seq=49340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23212 bytes_read=73389 bytes_retransmit=0 bytes_invalid=0 send_seq=3843 receive_seq=3843 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999267 sd_pos=169985 heater_bed: target=60 temp=60.1 pwm=0.050 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=25.6 sysload=0.60 cputime=392.424 memavail=695900 print_time=4090.699 buffer_time=2.169 print_stall=0 extruder: target=220 temp=220.1 pwm=0.443
Stats 4088.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1273688 bytes_read=1478374 bytes_retransmit=0 bytes_invalid=0 send_seq=49388 receive_seq=49388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23218 bytes_read=73404 bytes_retransmit=0 bytes_invalid=0 send_seq=3844 receive_seq=3844 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999290 sd_pos=170179 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=25.5 sysload=0.55 cputime=392.549 memavail=695900 print_time=4091.805 buffer_time=2.274 print_stall=0 extruder: target=220 temp=219.9 pwm=0.507
Stats 4089.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1275373 bytes_read=1479028 bytes_retransmit=0 bytes_invalid=0 send_seq=49428 receive_seq=49428 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23224 bytes_read=73419 bytes_retransmit=0 bytes_invalid=0 send_seq=3845 receive_seq=3845 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999295 sd_pos=170293 heater_bed: target=60 temp=60.0 pwm=0.052 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.7 sysload=0.55 cputime=392.659 memavail=695900 print_time=4092.566 buffer_time=2.035 print_stall=0 extruder: target=220 temp=219.7 pwm=0.559
Stats 4090.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1277612 bytes_read=1479700 bytes_retransmit=0 bytes_invalid=0 send_seq=49477 receive_seq=49477 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23230 bytes_read=73434 bytes_retransmit=0 bytes_invalid=0 send_seq=3846 receive_seq=3846 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999287 sd_pos=170463 heater_bed: target=60 temp=60.1 pwm=0.034 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=25.8 sysload=0.55 cputime=392.790 memavail=696152 print_time=4093.756 buffer_time=2.223 print_stall=0 extruder: target=220 temp=219.5 pwm=0.559
Stats 4091.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1279263 bytes_read=1480306 bytes_retransmit=0 bytes_invalid=0 send_seq=49515 receive_seq=49515 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23236 bytes_read=73449 bytes_retransmit=0 bytes_invalid=0 send_seq=3847 receive_seq=3847 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999291 sd_pos=170575 heater_bed: target=60 temp=60.1 pwm=0.098 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=25.8 sysload=0.55 cputime=392.933 memavail=696152 print_time=4094.584 buffer_time=2.051 print_stall=0 extruder: target=220 temp=219.5 pwm=0.559
Stats 4092.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1281337 bytes_read=1480990 bytes_retransmit=0 bytes_invalid=0 send_seq=49561 receive_seq=49561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23242 bytes_read=73477 bytes_retransmit=0 bytes_invalid=0 send_seq=3848 receive_seq=3848 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999298 sd_pos=170744 heater_bed: target=60 temp=60.1 pwm=0.074 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=25.8 sysload=0.55 cputime=393.101 memavail=696152 print_time=4095.876 buffer_time=2.342 print_stall=0 extruder: target=220 temp=219.4 pwm=0.622
Stats 4093.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1282920 bytes_read=1481596 bytes_retransmit=0 bytes_invalid=0 send_seq=49600 receive_seq=49600 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23248 bytes_read=73493 bytes_retransmit=0 bytes_invalid=0 send_seq=3849 receive_seq=3849 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999331 sd_pos=170859 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=25.9 sysload=0.50 cputime=393.223 memavail=696152 print_time=4096.726 buffer_time=2.192 print_stall=0 extruder: target=220 temp=219.5 pwm=0.551
Stats 4094.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1284463 bytes_read=1482187 bytes_retransmit=0 bytes_invalid=0 send_seq=49635 receive_seq=49635 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23254 bytes_read=73509 bytes_retransmit=0 bytes_invalid=0 send_seq=3850 receive_seq=3850 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999326 sd_pos=170971 heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=37.3 chamber: temp=26.0 sysload=0.50 cputime=393.376 memavail=696152 print_time=4097.547 buffer_time=2.012 print_stall=0 extruder: target=220 temp=219.6 pwm=0.551
Stats 4095.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1286569 bytes_read=1482881 bytes_retransmit=0 bytes_invalid=0 send_seq=49680 receive_seq=49680 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23260 bytes_read=73525 bytes_retransmit=0 bytes_invalid=0 send_seq=3851 receive_seq=3851 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999326 sd_pos=171136 heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=26.1 sysload=0.50 cputime=393.537 memavail=696152 print_time=4098.760 buffer_time=2.224 print_stall=0 extruder: target=220 temp=219.8 pwm=0.490
Stats 4096.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1288214 bytes_read=1483482 bytes_retransmit=0 bytes_invalid=0 send_seq=49718 receive_seq=49718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23266 bytes_read=73541 bytes_retransmit=0 bytes_invalid=0 send_seq=3852 receive_seq=3852 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999337 sd_pos=171243 heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.1 sysload=0.50 cputime=393.676 memavail=696080 print_time=4099.562 buffer_time=2.024 print_stall=0 extruder: target=220 temp=220.0 pwm=0.490
Stats 4097.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1290402 bytes_read=1484128 bytes_retransmit=0 bytes_invalid=0 send_seq=49764 receive_seq=49764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23272 bytes_read=73570 bytes_retransmit=0 bytes_invalid=0 send_seq=3853 receive_seq=3853 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999339 sd_pos=171409 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=26.2 sysload=0.50 cputime=393.806 memavail=696168 print_time=4100.750 buffer_time=2.211 print_stall=0 extruder: target=220 temp=220.0 pwm=0.490
Stats 4098.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1292058 bytes_read=1484772 bytes_retransmit=0 bytes_invalid=0 send_seq=49802 receive_seq=49802 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=599 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23278 bytes_read=73586 bytes_retransmit=0 bytes_invalid=0 send_seq=3854 receive_seq=3854 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999347 sd_pos=171574 heater_bed: target=60 temp=59.9 pwm=0.192 raspberry_pi: temp=40.2 mcu_temp: temp=37.3 chamber: temp=26.3 sysload=0.54 cputime=393.977 memavail=696168 print_time=4101.920 buffer_time=2.372 print_stall=0 extruder: target=220 temp=220.0 pwm=0.490
Stats 4099.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1294294 bytes_read=1485418 bytes_retransmit=0 bytes_invalid=0 send_seq=49849 receive_seq=49849 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23284 bytes_read=73602 bytes_retransmit=0 bytes_invalid=0 send_seq=3855 receive_seq=3855 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999364 sd_pos=171685 heater_bed: target=60 temp=59.8 pwm=0.192 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.3 sysload=0.54 cputime=394.126 memavail=696428 print_time=4102.682 buffer_time=2.134 print_stall=0 extruder: target=220 temp=219.9 pwm=0.562
Stats 4100.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1296528 bytes_read=1486084 bytes_retransmit=0 bytes_invalid=0 send_seq=49896 receive_seq=49896 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23290 bytes_read=73618 bytes_retransmit=0 bytes_invalid=0 send_seq=3856 receive_seq=3856 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999381 sd_pos=171849 heater_bed: target=60 temp=59.8 pwm=0.192 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.3 sysload=0.54 cputime=394.288 memavail=696428 print_time=4103.790 buffer_time=2.241 print_stall=0 extruder: target=220 temp=219.8 pwm=0.562
Stats 4101.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1298854 bytes_read=1486788 bytes_retransmit=0 bytes_invalid=0 send_seq=49946 receive_seq=49946 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23296 bytes_read=73634 bytes_retransmit=0 bytes_invalid=0 send_seq=3857 receive_seq=3857 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999365 sd_pos=172017 heater_bed: target=60 temp=59.9 pwm=0.082 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=26.6 sysload=0.54 cputime=394.440 memavail=696428 print_time=4104.840 buffer_time=2.291 print_stall=0 extruder: target=220 temp=219.7 pwm=0.562
Stats 4102.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1301153 bytes_read=1487448 bytes_retransmit=0 bytes_invalid=0 send_seq=49996 receive_seq=49996 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23302 bytes_read=73663 bytes_retransmit=0 bytes_invalid=0 send_seq=3858 receive_seq=3858 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999336 sd_pos=172182 heater_bed: target=60 temp=59.8 pwm=0.141 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.5 sysload=0.54 cputime=394.598 memavail=695928 print_time=4105.819 buffer_time=2.269 print_stall=0 extruder: target=220 temp=219.6 pwm=0.562
Stats 4103.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1303500 bytes_read=1488110 bytes_retransmit=0 bytes_invalid=0 send_seq=50046 receive_seq=50046 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23308 bytes_read=73679 bytes_retransmit=0 bytes_invalid=0 send_seq=3859 receive_seq=3859 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999394 sd_pos=172375 heater_bed: target=60 temp=59.9 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=26.5 sysload=0.58 cputime=394.758 memavail=695928 print_time=4106.734 buffer_time=2.184 print_stall=0 extruder: target=220 temp=219.5 pwm=0.619
Stats 4104.4: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1306495 bytes_read=1488852 bytes_retransmit=0 bytes_invalid=0 send_seq=50107 receive_seq=50107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23314 bytes_read=73695 bytes_retransmit=0 bytes_invalid=0 send_seq=3860 receive_seq=3860 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999700 adj=49999404 sd_pos=172567 heater_bed: target=60 temp=59.9 pwm=0.103 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.5 sysload=0.58 cputime=394.917 memavail=695928 print_time=4107.760 buffer_time=2.209 print_stall=0 extruder: target=220 temp=219.6 pwm=0.619
Stats 4105.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1309556 bytes_read=1489594 bytes_retransmit=0 bytes_invalid=0 send_seq=50170 receive_seq=50170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23320 bytes_read=73711 bytes_retransmit=0 bytes_invalid=0 send_seq=3861 receive_seq=3861 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999327 sd_pos=172791 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.5 sysload=0.58 cputime=395.077 memavail=695936 print_time=4108.634 buffer_time=2.082 print_stall=0 extruder: target=220 temp=219.7 pwm=0.562
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4106.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1315968 bytes_read=1490600 bytes_retransmit=0 bytes_invalid=0 send_seq=50286 receive_seq=50286 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=2050 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23326 bytes_read=73727 bytes_retransmit=0 bytes_invalid=0 send_seq=3862 receive_seq=3862 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999701 adj=49999317 sd_pos=173828 heater_bed: target=60 temp=59.9 pwm=0.082 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.58 cputime=395.398 memavail=695940 print_time=4110.259 buffer_time=2.706 print_stall=0 extruder: target=220 temp=219.9 pwm=0.508
Stats 4107.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1318959 bytes_read=1491334 bytes_retransmit=0 bytes_invalid=0 send_seq=50344 receive_seq=50344 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=2405 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23332 bytes_read=73756 bytes_retransmit=0 bytes_invalid=0 send_seq=3863 receive_seq=3863 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999357 sd_pos=174054 heater_bed: target=60 temp=59.9 pwm=0.098 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=26.7 sysload=0.58 cputime=395.546 memavail=695940 print_time=4110.917 buffer_time=2.364 print_stall=0 extruder: target=220 temp=220.2 pwm=0.508
Stats 4108.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1324043 bytes_read=1492190 bytes_retransmit=0 bytes_invalid=0 send_seq=50433 receive_seq=50433 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=1903 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23338 bytes_read=73772 bytes_retransmit=0 bytes_invalid=0 send_seq=3864 receive_seq=3864 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999332 sd_pos=174400 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.69 cputime=395.764 memavail=696144 print_time=4111.860 buffer_time=2.307 print_stall=0 extruder: target=220 temp=220.3 pwm=0.454
Stats 4109.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=1329537 bytes_read=1493076 bytes_retransmit=0 bytes_invalid=0 send_seq=50527 receive_seq=50527 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=1209 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23344 bytes_read=73788 bytes_retransmit=0 bytes_invalid=0 send_seq=3865 receive_seq=3865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999338 sd_pos=174775 heater_bed: target=60 temp=59.9 pwm=0.112 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.69 cputime=395.980 memavail=696192 print_time=4112.902 buffer_time=2.347 print_stall=0 extruder: target=220 temp=220.4 pwm=0.454
Stats 4110.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=1334423 bytes_read=1493981 bytes_retransmit=0 bytes_invalid=0 send_seq=50614 receive_seq=50614 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=1307 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23350 bytes_read=73804 bytes_retransmit=0 bytes_invalid=0 send_seq=3866 receive_seq=3866 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999695 adj=49999334 sd_pos=175120 heater_bed: target=60 temp=59.9 pwm=0.112 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=26.8 sysload=0.69 cputime=396.159 memavail=696192 print_time=4113.901 buffer_time=2.346 print_stall=0 extruder: target=220 temp=220.3 pwm=0.516
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4111.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=1339000 bytes_read=1494792 bytes_retransmit=0 bytes_invalid=0 send_seq=50696 receive_seq=50696 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=3394 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23356 bytes_read=73820 bytes_retransmit=0 bytes_invalid=0 send_seq=3867 receive_seq=3867 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999346 sd_pos=175778 heater_bed: target=60 temp=59.9 pwm=0.071 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.69 cputime=396.483 memavail=696204 print_time=4115.030 buffer_time=2.475 print_stall=0 extruder: target=220 temp=220.1 pwm=0.516
Stats 4112.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=1343742 bytes_read=1495667 bytes_retransmit=0 bytes_invalid=0 send_seq=50780 receive_seq=50780 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=5049 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=23362 bytes_read=73849 bytes_retransmit=0 bytes_invalid=0 send_seq=3868 receive_seq=3868 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999322 sd_pos=176235 heater_bed: target=60 temp=59.8 pwm=0.184 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.69 cputime=396.660 memavail=696204 print_time=4116.077 buffer_time=2.508 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 4113.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=1349724 bytes_read=1496612 bytes_retransmit=0 bytes_invalid=0 send_seq=50884 receive_seq=50884 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=2747 freq=180001299 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=23368 bytes_read=73865 bytes_retransmit=0 bytes_invalid=0 send_seq=3869 receive_seq=3869 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999684 adj=49999295 sd_pos=176467 heater_bed: target=60 temp=59.9 pwm=0.121 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.72 cputime=396.824 memavail=696204 print_time=4116.621 buffer_time=2.051 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
Stats 4114.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=1355907 bytes_read=1497548 bytes_retransmit=0 bytes_invalid=0 send_seq=50991 receive_seq=50991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=3059 freq=180001292 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=23374 bytes_read=73881 bytes_retransmit=0 bytes_invalid=0 send_seq=3870 receive_seq=3870 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999681 adj=49999268 sd_pos=176928 heater_bed: target=60 temp=59.9 pwm=0.121 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.72 cputime=397.002 memavail=696204 print_time=4117.750 buffer_time=2.180 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
Stats 4115.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1362030 bytes_read=1498559 bytes_retransmit=0 bytes_invalid=0 send_seq=51099 receive_seq=51099 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=2152 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=23380 bytes_read=73897 bytes_retransmit=0 bytes_invalid=0 send_seq=3871 receive_seq=3871 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999263 sd_pos=177271 heater_bed: target=60 temp=59.9 pwm=0.150 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.72 cputime=397.160 memavail=696204 print_time=4118.630 buffer_time=2.059 print_stall=0 extruder: target=220 temp=219.7 pwm=0.601
Stats 4116.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1367973 bytes_read=1499489 bytes_retransmit=0 bytes_invalid=0 send_seq=51202 receive_seq=51202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=3416 freq=180001308 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=23386 bytes_read=73913 bytes_retransmit=0 bytes_invalid=0 send_seq=3872 receive_seq=3872 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999203 sd_pos=177791 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.72 cputime=397.348 memavail=695964 print_time=4120.056 buffer_time=2.470 print_stall=0 extruder: target=220 temp=219.9 pwm=0.543
Stats 4117.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1373740 bytes_read=1500411 bytes_retransmit=0 bytes_invalid=0 send_seq=51302 receive_seq=51302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2672 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23398 bytes_read=73958 bytes_retransmit=0 bytes_invalid=0 send_seq=3874 receive_seq=3874 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999675 adj=49999186 sd_pos=178137 heater_bed: target=60 temp=59.9 pwm=0.111 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.72 cputime=397.535 memavail=695964 print_time=4121.068 buffer_time=2.480 print_stall=0 extruder: target=220 temp=220.1 pwm=0.478
Stats 4118.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1379175 bytes_read=1501331 bytes_retransmit=0 bytes_invalid=0 send_seq=51395 receive_seq=51395 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=113 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23404 bytes_read=73974 bytes_retransmit=0 bytes_invalid=0 send_seq=3875 receive_seq=3875 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999172 sd_pos=178311 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=27.0 sysload=0.82 cputime=397.717 memavail=695964 print_time=4121.595 buffer_time=2.007 print_stall=0 extruder: target=220 temp=220.3 pwm=0.478
Stats 4119.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1384225 bytes_read=1502191 bytes_retransmit=0 bytes_invalid=0 send_seq=51484 receive_seq=51484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23410 bytes_read=73990 bytes_retransmit=0 bytes_invalid=0 send_seq=3876 receive_seq=3876 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999064 sd_pos=178652 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=27.1 sysload=0.82 cputime=397.889 memavail=695964 print_time=4122.713 buffer_time=2.123 print_stall=0 extruder: target=220 temp=220.3 pwm=0.478
Stats 4120.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1388787 bytes_read=1503048 bytes_retransmit=0 bytes_invalid=0 send_seq=51570 receive_seq=51570 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=219 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23416 bytes_read=74006 bytes_retransmit=0 bytes_invalid=0 send_seq=3877 receive_seq=3877 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999078 sd_pos=178988 heater_bed: target=60 temp=60.0 pwm=0.051 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=27.0 sysload=0.82 cputime=398.092 memavail=695976 print_time=4123.903 buffer_time=2.313 print_stall=0 extruder: target=220 temp=220.2 pwm=0.478
Stats 4121.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1392494 bytes_read=1503853 bytes_retransmit=0 bytes_invalid=0 send_seq=51640 receive_seq=51640 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=23422 bytes_read=74022 bytes_retransmit=0 bytes_invalid=0 send_seq=3878 receive_seq=3878 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999136 sd_pos=179243 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.0 sysload=0.82 cputime=398.266 memavail=695976 print_time=4124.738 buffer_time=2.148 print_stall=0 extruder: target=220 temp=220.2 pwm=0.478
Stats 4122.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1395910 bytes_read=1504613 bytes_retransmit=0 bytes_invalid=0 send_seq=51707 receive_seq=51707 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23428 bytes_read=74051 bytes_retransmit=0 bytes_invalid=0 send_seq=3879 receive_seq=3879 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999099 sd_pos=179466 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.3 sysload=0.82 cputime=398.435 memavail=695976 print_time=4125.591 buffer_time=2.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.615
Stats 4123.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1400790 bytes_read=1505479 bytes_retransmit=0 bytes_invalid=0 send_seq=51798 receive_seq=51798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23434 bytes_read=74067 bytes_retransmit=0 bytes_invalid=0 send_seq=3880 receive_seq=3880 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999081 sd_pos=179801 heater_bed: target=60 temp=59.9 pwm=0.116 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.84 cputime=398.604 memavail=695540 print_time=4126.921 buffer_time=2.329 print_stall=0 extruder: target=220 temp=219.7 pwm=0.615
Stats 4124.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1404052 bytes_read=1506249 bytes_retransmit=0 bytes_invalid=0 send_seq=51863 receive_seq=51863 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23440 bytes_read=74083 bytes_retransmit=0 bytes_invalid=0 send_seq=3881 receive_seq=3881 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999141 sd_pos=180052 heater_bed: target=60 temp=60.0 pwm=0.071 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.84 cputime=398.781 memavail=695724 print_time=4127.848 buffer_time=2.256 print_stall=0 extruder: target=220 temp=219.6 pwm=0.615
Stats 4125.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1407309 bytes_read=1507020 bytes_retransmit=0 bytes_invalid=0 send_seq=51929 receive_seq=51929 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23446 bytes_read=74099 bytes_retransmit=0 bytes_invalid=0 send_seq=3882 receive_seq=3882 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999130 sd_pos=180301 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.2 chamber: temp=27.2 sysload=0.84 cputime=398.956 memavail=695724 print_time=4128.813 buffer_time=2.220 print_stall=0 extruder: target=220 temp=219.7 pwm=0.551
Stats 4126.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1410388 bytes_read=1507737 bytes_retransmit=0 bytes_invalid=0 send_seq=51991 receive_seq=51991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23452 bytes_read=74115 bytes_retransmit=0 bytes_invalid=0 send_seq=3883 receive_seq=3883 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999145 sd_pos=180522 heater_bed: target=60 temp=60.0 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.2 sysload=0.84 cputime=399.124 memavail=695988 print_time=4129.815 buffer_time=2.220 print_stall=0 extruder: target=220 temp=219.7 pwm=0.551
Stats 4127.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1413581 bytes_read=1508496 bytes_retransmit=0 bytes_invalid=0 send_seq=52055 receive_seq=52055 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23458 bytes_read=74144 bytes_retransmit=0 bytes_invalid=0 send_seq=3884 receive_seq=3884 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999110 sd_pos=180743 heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.84 cputime=399.298 memavail=695988 print_time=4130.849 buffer_time=2.255 print_stall=0 extruder: target=220 temp=219.9 pwm=0.551
Stats 4128.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1416892 bytes_read=1509250 bytes_retransmit=0 bytes_invalid=0 send_seq=52121 receive_seq=52121 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23464 bytes_read=74160 bytes_retransmit=0 bytes_invalid=0 send_seq=3885 receive_seq=3885 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999118 sd_pos=180966 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.2 sysload=0.85 cputime=399.481 memavail=695988 print_time=4131.918 buffer_time=2.322 print_stall=0 extruder: target=220 temp=219.9 pwm=0.551
Stats 4129.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1420239 bytes_read=1509996 bytes_retransmit=0 bytes_invalid=0 send_seq=52188 receive_seq=52188 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23470 bytes_read=74176 bytes_retransmit=0 bytes_invalid=0 send_seq=3886 receive_seq=3886 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999192 sd_pos=181183 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.85 cputime=399.639 memavail=695884 print_time=4133.019 buffer_time=2.423 print_stall=0 extruder: target=220 temp=220.1 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4130.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1425431 bytes_read=1510947 bytes_retransmit=0 bytes_invalid=0 send_seq=52284 receive_seq=52284 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2273 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23476 bytes_read=74192 bytes_retransmit=0 bytes_invalid=0 send_seq=3887 receive_seq=3887 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999191 sd_pos=181987 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.85 cputime=399.985 memavail=695988 print_time=4134.334 buffer_time=2.737 print_stall=0 extruder: target=220 temp=220.1 pwm=0.499
Stats 4131.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1428790 bytes_read=1511662 bytes_retransmit=0 bytes_invalid=0 send_seq=52344 receive_seq=52344 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=7488 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=23482 bytes_read=74208 bytes_retransmit=0 bytes_invalid=0 send_seq=3888 receive_seq=3888 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999174 sd_pos=182760 heater_bed: target=60 temp=60.0 pwm=0.097 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=27.1 sysload=0.85 cputime=400.152 memavail=695988 print_time=4135.337 buffer_time=2.739 print_stall=0 extruder: target=220 temp=220.1 pwm=0.499
Stats 4132.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1432380 bytes_read=1512413 bytes_retransmit=0 bytes_invalid=0 send_seq=52412 receive_seq=52412 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=11170 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23488 bytes_read=74237 bytes_retransmit=0 bytes_invalid=0 send_seq=3889 receive_seq=3889 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999184 sd_pos=183366 heater_bed: target=60 temp=60.0 pwm=0.097 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.85 cputime=400.309 memavail=696000 print_time=4136.209 buffer_time=2.610 print_stall=0 extruder: target=220 temp=220.0 pwm=0.561
Stats 4133.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1440353 bytes_read=1513518 bytes_retransmit=0 bytes_invalid=0 send_seq=52545 receive_seq=52544 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=9765 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23494 bytes_read=74253 bytes_retransmit=0 bytes_invalid=0 send_seq=3890 receive_seq=3890 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999085 sd_pos=183865 heater_bed: target=60 temp=60.0 pwm=0.088 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.3 sysload=0.86 cputime=400.518 memavail=696000 print_time=4136.980 buffer_time=2.381 print_stall=0 extruder: target=220 temp=219.8 pwm=0.561
Stats 4134.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=1449284 bytes_read=1514693 bytes_retransmit=0 bytes_invalid=0 send_seq=52694 receive_seq=52694 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=6715 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23500 bytes_read=74269 bytes_retransmit=0 bytes_invalid=0 send_seq=3891 receive_seq=3891 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999067 sd_pos=184307 heater_bed: target=60 temp=60.0 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.2 sysload=0.86 cputime=400.711 memavail=695896 print_time=4137.709 buffer_time=2.110 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
Stats 4135.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1457647 bytes_read=1515815 bytes_retransmit=0 bytes_invalid=0 send_seq=52835 receive_seq=52835 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=8809 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23506 bytes_read=74285 bytes_retransmit=0 bytes_invalid=0 send_seq=3892 receive_seq=3892 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999027 sd_pos=185135 heater_bed: target=60 temp=60.0 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.3 sysload=0.86 cputime=400.923 memavail=696012 print_time=4139.173 buffer_time=2.572 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
Stats 4136.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1465485 bytes_read=1516905 bytes_retransmit=0 bytes_invalid=0 send_seq=52965 receive_seq=52964 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=6588 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23512 bytes_read=74301 bytes_retransmit=0 bytes_invalid=0 send_seq=3893 receive_seq=3893 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999112 sd_pos=185522 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.86 cputime=401.072 memavail=696012 print_time=4139.894 buffer_time=2.293 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
Stats 4137.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1473027 bytes_read=1517980 bytes_retransmit=0 bytes_invalid=0 send_seq=53094 receive_seq=53094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=8065 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23518 bytes_read=74330 bytes_retransmit=0 bytes_invalid=0 send_seq=3894 receive_seq=3894 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999056 sd_pos=186185 heater_bed: target=60 temp=60.0 pwm=0.083 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.86 cputime=401.316 memavail=696012 print_time=4141.183 buffer_time=2.581 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
Stats 4138.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1480214 bytes_read=1518991 bytes_retransmit=0 bytes_invalid=0 send_seq=53216 receive_seq=53216 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4735 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23524 bytes_read=74346 bytes_retransmit=0 bytes_invalid=0 send_seq=3895 receive_seq=3895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999107 sd_pos=186429 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.0 sysload=0.87 cputime=401.472 memavail=695760 print_time=4141.894 buffer_time=2.292 print_stall=0 extruder: target=220 temp=220.4 pwm=0.426
Stats 4139.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=1487567 bytes_read=1520066 bytes_retransmit=0 bytes_invalid=0 send_seq=53342 receive_seq=53340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=723 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23530 bytes_read=74362 bytes_retransmit=0 bytes_invalid=0 send_seq=3896 receive_seq=3896 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999092 sd_pos=186596 heater_bed: target=60 temp=60.0 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.87 cputime=401.685 memavail=695760 print_time=4142.953 buffer_time=2.332 print_stall=0 extruder: target=220 temp=220.5 pwm=0.426
Stats 4140.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1490473 bytes_read=1520772 bytes_retransmit=0 bytes_invalid=0 send_seq=53395 receive_seq=53395 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23536 bytes_read=74378 bytes_retransmit=0 bytes_invalid=0 send_seq=3897 receive_seq=3897 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999615 adj=49999126 sd_pos=186708 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.0 sysload=0.87 cputime=401.841 memavail=695768 print_time=4143.656 buffer_time=2.034 print_stall=0 extruder: target=220 temp=220.7 pwm=0.426
Stats 4141.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1493421 bytes_read=1521478 bytes_retransmit=0 bytes_invalid=0 send_seq=53454 receive_seq=53454 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23542 bytes_read=74394 bytes_retransmit=0 bytes_invalid=0 send_seq=3898 receive_seq=3898 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999083 sd_pos=186907 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=27.0 sysload=0.87 cputime=401.982 memavail=696032 print_time=4144.711 buffer_time=2.089 print_stall=0 extruder: target=220 temp=220.6 pwm=0.426
Stats 4142.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1496354 bytes_read=1522228 bytes_retransmit=0 bytes_invalid=0 send_seq=53513 receive_seq=53513 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23548 bytes_read=74423 bytes_retransmit=0 bytes_invalid=0 send_seq=3899 receive_seq=3899 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999063 sd_pos=187078 heater_bed: target=60 temp=60.0 pwm=0.170 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.87 cputime=402.161 memavail=696024 print_time=4145.761 buffer_time=2.138 print_stall=0 extruder: target=220 temp=220.4 pwm=0.500
Stats 4143.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1499407 bytes_read=1522968 bytes_retransmit=0 bytes_invalid=0 send_seq=53576 receive_seq=53576 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23554 bytes_read=74439 bytes_retransmit=0 bytes_invalid=0 send_seq=3900 receive_seq=3900 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999041 sd_pos=187283 heater_bed: target=60 temp=60.0 pwm=0.177 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.88 cputime=402.346 memavail=696024 print_time=4146.802 buffer_time=2.178 print_stall=0 extruder: target=220 temp=220.0 pwm=0.561
Stats 4144.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1502341 bytes_read=1523680 bytes_retransmit=0 bytes_invalid=0 send_seq=53636 receive_seq=53636 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23560 bytes_read=74455 bytes_retransmit=0 bytes_invalid=0 send_seq=3901 receive_seq=3901 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999040 sd_pos=187447 heater_bed: target=60 temp=60.0 pwm=0.177 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.0 sysload=0.88 cputime=402.530 memavail=695652 print_time=4147.825 buffer_time=2.201 print_stall=0 extruder: target=220 temp=219.7 pwm=0.618
Stats 4145.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1505437 bytes_read=1524467 bytes_retransmit=0 bytes_invalid=0 send_seq=53699 receive_seq=53699 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23566 bytes_read=74471 bytes_retransmit=0 bytes_invalid=0 send_seq=3902 receive_seq=3902 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999024 sd_pos=187644 heater_bed: target=60 temp=59.9 pwm=0.185 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=27.0 sysload=0.88 cputime=402.715 memavail=695776 print_time=4148.835 buffer_time=2.210 print_stall=0 extruder: target=220 temp=219.4 pwm=0.668
Stats 4146.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1508550 bytes_read=1525208 bytes_retransmit=0 bytes_invalid=0 send_seq=53762 receive_seq=53762 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23572 bytes_read=74487 bytes_retransmit=0 bytes_invalid=0 send_seq=3903 receive_seq=3903 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49998996 sd_pos=187868 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.88 cputime=402.902 memavail=696028 print_time=4149.821 buffer_time=2.195 print_stall=0 extruder: target=220 temp=219.4 pwm=0.613
Stats 4147.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1511633 bytes_read=1525930 bytes_retransmit=0 bytes_invalid=0 send_seq=53824 receive_seq=53824 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23578 bytes_read=74516 bytes_retransmit=0 bytes_invalid=0 send_seq=3904 receive_seq=3904 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999032 sd_pos=188036 heater_bed: target=60 temp=60.0 pwm=0.059 raspberry_pi: temp=39.7 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.88 cputime=403.076 memavail=696036 print_time=4150.785 buffer_time=2.157 print_stall=0 extruder: target=220 temp=219.6 pwm=0.560
Stats 4148.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1514714 bytes_read=1526715 bytes_retransmit=0 bytes_invalid=0 send_seq=53887 receive_seq=53887 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23584 bytes_read=74532 bytes_retransmit=0 bytes_invalid=0 send_seq=3905 receive_seq=3905 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49998851 sd_pos=188203 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.2 sysload=0.89 cputime=403.260 memavail=696036 print_time=4151.740 buffer_time=2.100 print_stall=0 extruder: target=220 temp=219.8 pwm=0.560
Stats 4149.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1517757 bytes_read=1527437 bytes_retransmit=0 bytes_invalid=0 send_seq=53949 receive_seq=53949 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001395 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23590 bytes_read=74548 bytes_retransmit=0 bytes_invalid=0 send_seq=3906 receive_seq=3906 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49998858 sd_pos=188368 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=27.1 sysload=0.89 cputime=403.427 memavail=696036 print_time=4152.694 buffer_time=2.055 print_stall=0 extruder: target=220 temp=220.0 pwm=0.483
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4150.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1521012 bytes_read=1528200 bytes_retransmit=0 bytes_invalid=0 send_seq=54014 receive_seq=54014 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001392 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23596 bytes_read=74564 bytes_retransmit=0 bytes_invalid=0 send_seq=3907 receive_seq=3907 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999586 adj=49998935 sd_pos=188762 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.89 cputime=403.746 memavail=696040 print_time=4153.682 buffer_time=2.042 print_stall=0 extruder: target=220 temp=220.3 pwm=0.483
Stats 4151.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1525349 bytes_read=1529059 bytes_retransmit=0 bytes_invalid=0 send_seq=54098 receive_seq=54098 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23602 bytes_read=74580 bytes_retransmit=0 bytes_invalid=0 send_seq=3908 receive_seq=3908 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49998917 sd_pos=188985 heater_bed: target=60 temp=60.0 pwm=0.104 raspberry_pi: temp=41.3 mcu_temp: temp=37.4 chamber: temp=27.2 sysload=0.89 cputime=403.894 memavail=696040 print_time=4154.895 buffer_time=2.254 print_stall=0 extruder: target=220 temp=220.2 pwm=0.533
Stats 4152.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1529357 bytes_read=1529866 bytes_retransmit=0 bytes_invalid=0 send_seq=54177 receive_seq=54177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23608 bytes_read=74609 bytes_retransmit=0 bytes_invalid=0 send_seq=3909 receive_seq=3909 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49998977 sd_pos=189262 heater_bed: target=60 temp=59.9 pwm=0.195 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.89 cputime=404.047 memavail=696040 print_time=4156.040 buffer_time=2.398 print_stall=0 extruder: target=220 temp=220.0 pwm=0.533
Stats 4153.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1533290 bytes_read=1530672 bytes_retransmit=0 bytes_invalid=0 send_seq=54255 receive_seq=54255 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23614 bytes_read=74625 bytes_retransmit=0 bytes_invalid=0 send_seq=3910 receive_seq=3910 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999005 sd_pos=189485 heater_bed: target=60 temp=59.8 pwm=0.190 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.2 sysload=0.90 cputime=404.190 memavail=695796 print_time=4157.106 buffer_time=2.463 print_stall=0 extruder: target=220 temp=219.9 pwm=0.610
Stats 4154.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1536800 bytes_read=1531417 bytes_retransmit=0 bytes_invalid=0 send_seq=54325 receive_seq=54313 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=323 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23620 bytes_read=74641 bytes_retransmit=0 bytes_invalid=0 send_seq=3911 receive_seq=3911 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999005 sd_pos=189706 heater_bed: target=60 temp=59.9 pwm=0.121 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.0 sysload=0.90 cputime=404.368 memavail=695796 print_time=4158.127 buffer_time=2.476 print_stall=0 extruder: target=220 temp=219.6 pwm=0.610
Stats 4155.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1541515 bytes_read=1532340 bytes_retransmit=0 bytes_invalid=0 send_seq=54415 receive_seq=54412 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001376 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23626 bytes_read=74657 bytes_retransmit=0 bytes_invalid=0 send_seq=3912 receive_seq=3912 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999048 sd_pos=190065 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.90 cputime=404.546 memavail=695796 print_time=4159.150 buffer_time=2.484 print_stall=0 extruder: target=220 temp=219.5 pwm=0.610
Stats 4156.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1545277 bytes_read=1533161 bytes_retransmit=0 bytes_invalid=0 send_seq=54488 receive_seq=54488 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=255 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23632 bytes_read=74673 bytes_retransmit=0 bytes_invalid=0 send_seq=3913 receive_seq=3913 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999074 sd_pos=190287 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=40.8 mcu_temp: temp=37.3 chamber: temp=26.9 sysload=0.90 cputime=404.683 memavail=695548 print_time=4160.087 buffer_time=2.420 print_stall=0 extruder: target=220 temp=219.5 pwm=0.610
Stats 4157.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1549171 bytes_read=1533962 bytes_retransmit=0 bytes_invalid=0 send_seq=54560 receive_seq=54560 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=411 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23638 bytes_read=74702 bytes_retransmit=0 bytes_invalid=0 send_seq=3914 receive_seq=3914 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999574 adj=49999082 sd_pos=190509 heater_bed: target=60 temp=60.1 pwm=0.032 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.0 sysload=0.90 cputime=404.871 memavail=695548 print_time=4160.990 buffer_time=2.322 print_stall=0 extruder: target=220 temp=219.7 pwm=0.593
Stats 4158.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1553541 bytes_read=1534769 bytes_retransmit=0 bytes_invalid=0 send_seq=54639 receive_seq=54639 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=128 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23644 bytes_read=74718 bytes_retransmit=0 bytes_invalid=0 send_seq=3915 receive_seq=3915 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999121 sd_pos=190728 heater_bed: target=60 temp=60.1 pwm=0.094 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.1 sysload=0.91 cputime=405.048 memavail=695548 print_time=4161.855 buffer_time=2.187 print_stall=0 extruder: target=220 temp=219.8 pwm=0.593
Stats 4159.5: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1557702 bytes_read=1535600 bytes_retransmit=0 bytes_invalid=0 send_seq=54714 receive_seq=54714 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=236 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23650 bytes_read=74734 bytes_retransmit=0 bytes_invalid=0 send_seq=3916 receive_seq=3916 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999103 sd_pos=190946 heater_bed: target=60 temp=60.1 pwm=0.094 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.91 cputime=405.227 memavail=695812 print_time=4162.680 buffer_time=2.011 print_stall=0 extruder: target=220 temp=219.9 pwm=0.541
Stats 4160.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1562474 bytes_read=1536456 bytes_retransmit=0 bytes_invalid=0 send_seq=54799 receive_seq=54799 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=2865 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23656 bytes_read=74750 bytes_retransmit=0 bytes_invalid=0 send_seq=3917 receive_seq=3917 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999566 adj=49999068 sd_pos=191432 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.91 cputime=405.420 memavail=695812 print_time=4163.990 buffer_time=2.320 print_stall=0 extruder: target=220 temp=220.1 pwm=0.541
Stats 4161.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1567403 bytes_read=1537298 bytes_retransmit=0 bytes_invalid=0 send_seq=54885 receive_seq=54885 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4648 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23662 bytes_read=74766 bytes_retransmit=0 bytes_invalid=0 send_seq=3918 receive_seq=3918 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999563 adj=49999083 sd_pos=191869 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.7 sysload=0.91 cputime=405.606 memavail=695812 print_time=4165.016 buffer_time=2.345 print_stall=0 extruder: target=220 temp=220.2 pwm=0.541
Stats 4162.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1573532 bytes_read=1538279 bytes_retransmit=0 bytes_invalid=0 send_seq=54990 receive_seq=54990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=5807 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=23668 bytes_read=74782 bytes_retransmit=0 bytes_invalid=0 send_seq=3919 receive_seq=3919 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999559 adj=49999101 sd_pos=192354 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=26.9 sysload=0.91 cputime=405.792 memavail=696064 print_time=4166.017 buffer_time=2.345 print_stall=0 extruder: target=220 temp=220.2 pwm=0.541
Stats 4163.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1579683 bytes_read=1539230 bytes_retransmit=0 bytes_invalid=0 send_seq=55095 receive_seq=55095 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=5575 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23674 bytes_read=74811 bytes_retransmit=0 bytes_invalid=0 send_seq=3920 receive_seq=3920 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999555 adj=49999023 sd_pos=192806 heater_bed: target=60 temp=60.1 pwm=0.106 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=26.9 sysload=0.92 cputime=405.961 memavail=696064 print_time=4166.704 buffer_time=2.031 print_stall=0 extruder: target=220 temp=220.2 pwm=0.528
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4164.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1587151 bytes_read=1540277 bytes_retransmit=0 bytes_invalid=0 send_seq=55222 receive_seq=55222 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=3700 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23680 bytes_read=74827 bytes_retransmit=0 bytes_invalid=0 send_seq=3921 receive_seq=3921 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999552 adj=49999000 sd_pos=193747 heater_bed: target=60 temp=60.1 pwm=0.166 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.92 cputime=406.240 memavail=696064 print_time=4168.076 buffer_time=2.403 print_stall=0 extruder: target=220 temp=220.2 pwm=0.528
Stats 4165.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1592530 bytes_read=1541213 bytes_retransmit=0 bytes_invalid=0 send_seq=55317 receive_seq=55317 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23686 bytes_read=74843 bytes_retransmit=0 bytes_invalid=0 send_seq=3922 receive_seq=3922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999549 adj=49999030 sd_pos=194050 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=26.8 sysload=0.92 cputime=406.415 memavail=695824 print_time=4168.744 buffer_time=2.070 print_stall=0 extruder: target=220 temp=220.1 pwm=0.528
Stats 4166.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1594290 bytes_read=1541823 bytes_retransmit=0 bytes_invalid=0 send_seq=55356 receive_seq=55356 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23692 bytes_read=74859 bytes_retransmit=0 bytes_invalid=0 send_seq=3923 receive_seq=3923 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999549 adj=49999004 sd_pos=194532 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.92 cputime=406.579 memavail=695580 print_time=4170.103 buffer_time=2.428 print_stall=0 extruder: target=220 temp=220.0 pwm=0.606
Stats 4167.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1595974 bytes_read=1542435 bytes_retransmit=0 bytes_invalid=0 send_seq=55396 receive_seq=55396 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=23698 bytes_read=74875 bytes_retransmit=0 bytes_invalid=0 send_seq=3924 receive_seq=3924 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999546 adj=49999035 sd_pos=194915 heater_bed: target=60 temp=60.1 pwm=0.165 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=26.8 sysload=0.92 cputime=406.724 memavail=695580 print_time=4170.850 buffer_time=2.175 print_stall=0 extruder: target=220 temp=219.9 pwm=0.606
Stats 4168.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1597784 bytes_read=1543090 bytes_retransmit=0 bytes_invalid=0 send_seq=55438 receive_seq=55438 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23704 bytes_read=74904 bytes_retransmit=0 bytes_invalid=0 send_seq=3925 receive_seq=3925 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999044 sd_pos=195275 heater_bed: target=60 temp=60.1 pwm=0.066 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=26.8 sysload=0.84 cputime=406.890 memavail=695584 print_time=4171.907 buffer_time=2.231 print_stall=0 extruder: target=220 temp=220.1 pwm=0.520
Stats 4169.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1599644 bytes_read=1543710 bytes_retransmit=0 bytes_invalid=0 send_seq=55479 receive_seq=55479 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23710 bytes_read=74920 bytes_retransmit=0 bytes_invalid=0 send_seq=3926 receive_seq=3926 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999026 sd_pos=195757 heater_bed: target=60 temp=60.0 pwm=0.192 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.84 cputime=407.049 memavail=695584 print_time=4172.937 buffer_time=2.260 print_stall=0 extruder: target=220 temp=220.1 pwm=0.509
Stats 4170.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1600998 bytes_read=1544312 bytes_retransmit=0 bytes_invalid=0 send_seq=55514 receive_seq=55514 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23716 bytes_read=74936 bytes_retransmit=0 bytes_invalid=0 send_seq=3927 receive_seq=3927 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999538 adj=49999041 sd_pos=196034 heater_bed: target=60 temp=60.0 pwm=0.126 raspberry_pi: temp=41.3 mcu_temp: temp=37.4 chamber: temp=26.8 sysload=0.84 cputime=407.201 memavail=695584 print_time=4173.851 buffer_time=2.174 print_stall=0 extruder: target=220 temp=220.3 pwm=0.509
Stats 4171.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1603054 bytes_read=1544977 bytes_retransmit=0 bytes_invalid=0 send_seq=55558 receive_seq=55558 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23722 bytes_read=74952 bytes_retransmit=0 bytes_invalid=0 send_seq=3928 receive_seq=3928 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999049 sd_pos=196471 heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=26.9 sysload=0.84 cputime=407.359 memavail=695592 print_time=4175.084 buffer_time=2.406 print_stall=0 extruder: target=220 temp=220.3 pwm=0.509
Stats 4172.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1604511 bytes_read=1545583 bytes_retransmit=0 bytes_invalid=0 send_seq=55594 receive_seq=55594 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23728 bytes_read=74968 bytes_retransmit=0 bytes_invalid=0 send_seq=3929 receive_seq=3929 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999070 sd_pos=196777 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.1 sysload=0.84 cputime=407.506 memavail=695592 print_time=4175.740 buffer_time=2.061 print_stall=0 extruder: target=220 temp=220.3 pwm=0.509
Stats 4173.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1606255 bytes_read=1546179 bytes_retransmit=0 bytes_invalid=0 send_seq=55633 receive_seq=55633 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23734 bytes_read=74997 bytes_retransmit=0 bytes_invalid=0 send_seq=3930 receive_seq=3930 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999531 adj=49999064 sd_pos=197260 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=40.2 mcu_temp: temp=37.5 chamber: temp=27.2 sysload=0.78 cputime=407.666 memavail=695592 print_time=4177.078 buffer_time=2.399 print_stall=0 extruder: target=220 temp=220.3 pwm=0.511
Stats 4174.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1607713 bytes_read=1546792 bytes_retransmit=0 bytes_invalid=0 send_seq=55670 receive_seq=55669 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23740 bytes_read=75012 bytes_retransmit=0 bytes_invalid=0 send_seq=3931 receive_seq=3931 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999528 adj=49999091 sd_pos=197620 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.2 sysload=0.78 cputime=407.814 memavail=695344 print_time=4177.782 buffer_time=2.102 print_stall=0 extruder: target=220 temp=220.1 pwm=0.572
Stats 4175.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1609598 bytes_read=1547443 bytes_retransmit=0 bytes_invalid=0 send_seq=55713 receive_seq=55713 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23746 bytes_read=75027 bytes_retransmit=0 bytes_invalid=0 send_seq=3932 receive_seq=3932 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999526 adj=49999085 sd_pos=197982 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=41.3 mcu_temp: temp=37.5 chamber: temp=27.5 sysload=0.78 cputime=407.968 memavail=695344 print_time=4178.848 buffer_time=2.168 print_stall=0 extruder: target=220 temp=219.9 pwm=0.572
Stats 4176.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1611392 bytes_read=1548043 bytes_retransmit=0 bytes_invalid=0 send_seq=55753 receive_seq=55753 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23752 bytes_read=75042 bytes_retransmit=0 bytes_invalid=0 send_seq=3933 receive_seq=3933 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999096 sd_pos=198435 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.4 sysload=0.78 cputime=408.123 memavail=696368 print_time=4179.861 buffer_time=2.180 print_stall=0 extruder: target=220 temp=219.8 pwm=0.572
Stats 4177.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1612768 bytes_read=1548669 bytes_retransmit=0 bytes_invalid=0 send_seq=55787 receive_seq=55787 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23758 bytes_read=75057 bytes_retransmit=0 bytes_invalid=0 send_seq=3934 receive_seq=3934 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999106 sd_pos=198712 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.6 sysload=0.78 cputime=408.280 memavail=696368 print_time=4180.760 buffer_time=2.078 print_stall=0 extruder: target=220 temp=219.8 pwm=0.572
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4178.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1619200 bytes_read=1549679 bytes_retransmit=0 bytes_invalid=0 send_seq=55906 receive_seq=55906 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23764 bytes_read=75085 bytes_retransmit=0 bytes_invalid=0 send_seq=3935 receive_seq=3935 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999116 sd_pos=200619 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=27.6 sysload=0.79 cputime=408.538 memavail=696368 print_time=4182.128 buffer_time=2.445 print_stall=0 extruder: target=220 temp=219.9 pwm=0.579
Stats 4179.5: gcodein=0  mcu: mcu_awake=0.007 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=1621819 bytes_read=1550350 bytes_retransmit=0 bytes_invalid=0 send_seq=55960 receive_seq=55960 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=3027 freq=180001286 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23770 bytes_read=75100 bytes_retransmit=0 bytes_invalid=0 send_seq=3936 receive_seq=3936 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999516 adj=49999137 sd_pos=203189 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=27.6 sysload=0.79 cputime=408.723 memavail=696368 print_time=4183.009 buffer_time=2.325 print_stall=0 extruder: target=220 temp=219.9 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4180.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1626643 bytes_read=1551281 bytes_retransmit=0 bytes_invalid=0 send_seq=56050 receive_seq=56049 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=6346 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23782 bytes_read=75132 bytes_retransmit=0 bytes_invalid=0 send_seq=3938 receive_seq=3938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999116 sd_pos=206373 heater_bed: target=60 temp=59.9 pwm=0.133 raspberry_pi: temp=41.3 mcu_temp: temp=37.4 chamber: temp=27.8 sysload=0.79 cputime=409.091 memavail=696064 print_time=4184.179 buffer_time=2.339 print_stall=0 extruder: target=220 temp=219.9 pwm=0.579
Stats 4181.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1633570 bytes_read=1552298 bytes_retransmit=0 bytes_invalid=0 send_seq=56167 receive_seq=56167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=4858 freq=180001299 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000018 bytes_write=23788 bytes_read=75148 bytes_retransmit=0 bytes_invalid=0 send_seq=3939 receive_seq=3939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999509 adj=49999045 sd_pos=209220 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=41.3 mcu_temp: temp=37.4 chamber: temp=28.3 sysload=0.79 cputime=409.290 memavail=696112 print_time=4184.895 buffer_time=2.054 print_stall=0 extruder: target=220 temp=220.0 pwm=0.518
Stats 4182.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1640580 bytes_read=1553337 bytes_retransmit=0 bytes_invalid=0 send_seq=56286 receive_seq=56286 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=6604 freq=180001300 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23794 bytes_read=75177 bytes_retransmit=0 bytes_invalid=0 send_seq=3940 receive_seq=3940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49998998 sd_pos=212621 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.0 sysload=0.79 cputime=409.540 memavail=696112 print_time=4186.193 buffer_time=2.351 print_stall=0 extruder: target=220 temp=220.2 pwm=0.518
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4183.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1647995 bytes_read=1554374 bytes_retransmit=0 bytes_invalid=0 send_seq=56411 receive_seq=56411 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=6614 freq=180001315 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23800 bytes_read=75193 bytes_retransmit=0 bytes_invalid=0 send_seq=3941 receive_seq=3941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999073 sd_pos=215570 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.0 sysload=0.73 cputime=409.915 memavail=696376 print_time=4187.152 buffer_time=2.310 print_stall=0 extruder: target=220 temp=220.2 pwm=0.518
Stats 4184.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=1654598 bytes_read=1555355 bytes_retransmit=0 bytes_invalid=0 send_seq=56524 receive_seq=56524 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=5744 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23806 bytes_read=75209 bytes_retransmit=0 bytes_invalid=0 send_seq=3942 receive_seq=3942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49998989 sd_pos=218621 heater_bed: target=60 temp=60.0 pwm=0.152 raspberry_pi: temp=41.3 mcu_temp: temp=37.5 chamber: temp=28.4 sysload=0.73 cputime=410.176 memavail=696376 print_time=4188.008 buffer_time=2.165 print_stall=0 extruder: target=220 temp=220.1 pwm=0.518
Stats 4185.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1662477 bytes_read=1556496 bytes_retransmit=0 bytes_invalid=0 send_seq=56658 receive_seq=56658 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=5625 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23812 bytes_read=75225 bytes_retransmit=0 bytes_invalid=0 send_seq=3943 receive_seq=3943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999500 adj=49998973 sd_pos=221511 heater_bed: target=60 temp=60.0 pwm=0.075 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.2 sysload=0.73 cputime=410.419 memavail=696376 print_time=4189.101 buffer_time=2.256 print_stall=0 extruder: target=220 temp=220.0 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4186.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1669328 bytes_read=1557477 bytes_retransmit=0 bytes_invalid=0 send_seq=56775 receive_seq=56774 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=4579 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23818 bytes_read=75241 bytes_retransmit=0 bytes_invalid=0 send_seq=3944 receive_seq=3944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999496 adj=49998995 sd_pos=223407 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.3 sysload=0.73 cputime=410.787 memavail=696124 print_time=4189.861 buffer_time=2.017 print_stall=0 extruder: target=220 temp=219.9 pwm=0.570
Stats 4187.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1676355 bytes_read=1558488 bytes_retransmit=0 bytes_invalid=0 send_seq=56893 receive_seq=56893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=4049 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23824 bytes_read=75270 bytes_retransmit=0 bytes_invalid=0 send_seq=3945 receive_seq=3945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999496 adj=49998961 sd_pos=227359 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.3 sysload=0.73 cputime=411.058 memavail=696124 print_time=4191.057 buffer_time=2.212 print_stall=0 extruder: target=220 temp=219.8 pwm=0.570
Stats 4188.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1683724 bytes_read=1559568 bytes_retransmit=0 bytes_invalid=0 send_seq=57018 receive_seq=57018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2915 freq=180001296 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23830 bytes_read=75286 bytes_retransmit=0 bytes_invalid=0 send_seq=3946 receive_seq=3946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999500 adj=49999011 sd_pos=229874 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=28.3 sysload=0.67 cputime=411.309 memavail=696124 print_time=4192.043 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.9 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4189.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1688983 bytes_read=1560424 bytes_retransmit=0 bytes_invalid=0 send_seq=57109 receive_seq=57109 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=3493 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23836 bytes_read=75302 bytes_retransmit=0 bytes_invalid=0 send_seq=3947 receive_seq=3947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999496 adj=49999101 sd_pos=231513 heater_bed: target=60 temp=60.1 pwm=0.100 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=28.5 sysload=0.67 cputime=411.553 memavail=695884 print_time=4192.934 buffer_time=2.080 print_stall=0 extruder: target=220 temp=219.8 pwm=0.573
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4190.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1695130 bytes_read=1561385 bytes_retransmit=0 bytes_invalid=0 send_seq=57212 receive_seq=57212 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4274 freq=180001289 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23842 bytes_read=75318 bytes_retransmit=0 bytes_invalid=0 send_seq=3948 receive_seq=3948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999492 adj=49999059 sd_pos=232305 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=28.5 sysload=0.67 cputime=411.798 memavail=695884 print_time=4194.220 buffer_time=2.360 print_stall=0 extruder: target=220 temp=219.9 pwm=0.573
Stats 4191.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1702106 bytes_read=1562416 bytes_retransmit=0 bytes_invalid=0 send_seq=57331 receive_seq=57330 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2628 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23848 bytes_read=75334 bytes_retransmit=0 bytes_invalid=0 send_seq=3949 receive_seq=3949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999493 adj=49999057 sd_pos=232634 heater_bed: target=60 temp=60.1 pwm=0.035 raspberry_pi: temp=41.3 mcu_temp: temp=37.4 chamber: temp=28.5 sysload=0.67 cputime=412.024 memavail=695884 print_time=4195.131 buffer_time=2.269 print_stall=0 extruder: target=220 temp=219.9 pwm=0.573
Stats 4192.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1707589 bytes_read=1563297 bytes_retransmit=0 bytes_invalid=0 send_seq=57426 receive_seq=57426 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=2632 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=23854 bytes_read=75350 bytes_retransmit=0 bytes_invalid=0 send_seq=3950 receive_seq=3950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999493 adj=49998969 sd_pos=232968 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=41.3 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.67 cputime=412.244 memavail=695896 print_time=4196.183 buffer_time=2.317 print_stall=0 extruder: target=220 temp=220.1 pwm=0.512
Stats 4193.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1713096 bytes_read=1564233 bytes_retransmit=0 bytes_invalid=0 send_seq=57522 receive_seq=57522 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=1178 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23860 bytes_read=75379 bytes_retransmit=0 bytes_invalid=0 send_seq=3951 receive_seq=3951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999495 adj=49998994 sd_pos=233219 heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.62 cputime=412.398 memavail=695896 print_time=4196.942 buffer_time=2.072 print_stall=0 extruder: target=220 temp=220.1 pwm=0.512
Stats 4194.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1718618 bytes_read=1565123 bytes_retransmit=0 bytes_invalid=0 send_seq=57618 receive_seq=57617 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=1333 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23866 bytes_read=75395 bytes_retransmit=0 bytes_invalid=0 send_seq=3952 receive_seq=3952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999494 adj=49999006 sd_pos=233580 heater_bed: target=60 temp=60.1 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.6 sysload=0.62 cputime=412.576 memavail=695896 print_time=4198.129 buffer_time=2.257 print_stall=0 extruder: target=220 temp=220.0 pwm=0.512
Stats 4195.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1723617 bytes_read=1566006 bytes_retransmit=0 bytes_invalid=0 send_seq=57708 receive_seq=57708 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=347 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23872 bytes_read=75411 bytes_retransmit=0 bytes_invalid=0 send_seq=3953 receive_seq=3953 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999494 adj=49999048 sd_pos=233858 heater_bed: target=60 temp=60.1 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.62 cputime=412.777 memavail=695644 print_time=4198.971 buffer_time=2.097 print_stall=0 extruder: target=220 temp=220.1 pwm=0.512
Stats 4196.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1728456 bytes_read=1566897 bytes_retransmit=0 bytes_invalid=0 send_seq=57795 receive_seq=57795 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=1050 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23878 bytes_read=75427 bytes_retransmit=0 bytes_invalid=0 send_seq=3954 receive_seq=3954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999497 adj=49999057 sd_pos=234220 heater_bed: target=60 temp=60.1 pwm=0.105 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.62 cputime=412.997 memavail=695896 print_time=4200.254 buffer_time=2.376 print_stall=0 extruder: target=220 temp=220.1 pwm=0.577
Stats 4197.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1733278 bytes_read=1567753 bytes_retransmit=0 bytes_invalid=0 send_seq=57881 receive_seq=57881 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=121 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23884 bytes_read=75443 bytes_retransmit=0 bytes_invalid=0 send_seq=3955 receive_seq=3955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999086 sd_pos=234441 heater_bed: target=60 temp=60.0 pwm=0.138 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.6 sysload=0.62 cputime=413.144 memavail=695896 print_time=4201.102 buffer_time=2.222 print_stall=0 extruder: target=220 temp=219.8 pwm=0.577
Stats 4198.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1737151 bytes_read=1568517 bytes_retransmit=0 bytes_invalid=0 send_seq=57954 receive_seq=57954 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23890 bytes_read=75472 bytes_retransmit=0 bytes_invalid=0 send_seq=3956 receive_seq=3956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999209 sd_pos=234661 heater_bed: target=60 temp=60.0 pwm=0.138 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.65 cputime=413.325 memavail=695908 print_time=4201.967 buffer_time=2.086 print_stall=0 extruder: target=220 temp=219.6 pwm=0.636
Stats 4199.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=1741554 bytes_read=1569298 bytes_retransmit=0 bytes_invalid=0 send_seq=58035 receive_seq=58023 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=585 stalled_bytes=310 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23896 bytes_read=75488 bytes_retransmit=0 bytes_invalid=0 send_seq=3957 receive_seq=3957 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999275 sd_pos=234993 heater_bed: target=60 temp=60.0 pwm=0.138 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.65 cputime=413.527 memavail=695908 print_time=4203.317 buffer_time=2.422 print_stall=0 extruder: target=220 temp=219.6 pwm=0.636
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4200.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1747241 bytes_read=1570349 bytes_retransmit=0 bytes_invalid=0 send_seq=58139 receive_seq=58139 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=17 stalled_bytes=736 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23902 bytes_read=75504 bytes_retransmit=0 bytes_invalid=0 send_seq=3958 receive_seq=3958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999503 adj=49999192 sd_pos=235509 heater_bed: target=60 temp=60.0 pwm=0.138 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.6 sysload=0.65 cputime=413.985 memavail=695908 print_time=4204.475 buffer_time=2.410 print_stall=0 extruder: target=220 temp=219.4 pwm=0.636
Stats 4201.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1751191 bytes_read=1571170 bytes_retransmit=0 bytes_invalid=0 send_seq=58215 receive_seq=58215 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=530 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23908 bytes_read=75520 bytes_retransmit=0 bytes_invalid=0 send_seq=3959 receive_seq=3959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999499 adj=49999156 sd_pos=235735 heater_bed: target=60 temp=60.0 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.65 cputime=414.132 memavail=695912 print_time=4205.486 buffer_time=2.419 print_stall=0 extruder: target=220 temp=219.6 pwm=0.636
Stats 4202.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1755416 bytes_read=1571972 bytes_retransmit=0 bytes_invalid=0 send_seq=58293 receive_seq=58293 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=23914 bytes_read=75549 bytes_retransmit=0 bytes_invalid=0 send_seq=3960 receive_seq=3960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999501 adj=49999105 sd_pos=235962 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.9 sysload=0.65 cputime=414.327 memavail=695912 print_time=4206.516 buffer_time=2.448 print_stall=0 extruder: target=220 temp=219.6 pwm=0.629
Stats 4203.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1759069 bytes_read=1572748 bytes_retransmit=0 bytes_invalid=0 send_seq=58364 receive_seq=58357 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=23920 bytes_read=75565 bytes_retransmit=0 bytes_invalid=0 send_seq=3961 receive_seq=3961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999501 adj=49999125 sd_pos=236186 heater_bed: target=60 temp=60.1 pwm=0.085 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.7 sysload=0.60 cputime=414.475 memavail=695912 print_time=4207.563 buffer_time=2.488 print_stall=0 extruder: target=220 temp=219.8 pwm=0.569
Stats 4204.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1761006 bytes_read=1573419 bytes_retransmit=0 bytes_invalid=0 send_seq=58406 receive_seq=58406 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=23926 bytes_read=75581 bytes_retransmit=0 bytes_invalid=0 send_seq=3962 receive_seq=3962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999501 adj=49999127 sd_pos=236311 heater_bed: target=60 temp=60.1 pwm=0.085 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.5 sysload=0.60 cputime=414.586 memavail=695668 print_time=4208.094 buffer_time=2.019 print_stall=0 extruder: target=220 temp=219.9 pwm=0.569
Stats 4205.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1764668 bytes_read=1574196 bytes_retransmit=0 bytes_invalid=0 send_seq=58478 receive_seq=58478 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=23932 bytes_read=75597 bytes_retransmit=0 bytes_invalid=0 send_seq=3963 receive_seq=3963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999106 sd_pos=236539 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.7 sysload=0.60 cputime=414.763 memavail=695668 print_time=4209.172 buffer_time=2.096 print_stall=0 extruder: target=220 temp=220.0 pwm=0.569
Stats 4206.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1768398 bytes_read=1575017 bytes_retransmit=0 bytes_invalid=0 send_seq=58551 receive_seq=58551 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=23938 bytes_read=75613 bytes_retransmit=0 bytes_invalid=0 send_seq=3964 receive_seq=3964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49999084 sd_pos=236766 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.8 sysload=0.60 cputime=414.947 memavail=695168 print_time=4210.276 buffer_time=2.199 print_stall=0 extruder: target=220 temp=219.9 pwm=0.569
Stats 4207.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1772270 bytes_read=1575833 bytes_retransmit=0 bytes_invalid=0 send_seq=58629 receive_seq=58629 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=23944 bytes_read=75629 bytes_retransmit=0 bytes_invalid=0 send_seq=3965 receive_seq=3965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999502 adj=49999098 sd_pos=236991 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.8 sysload=0.60 cputime=415.154 memavail=695424 print_time=4211.407 buffer_time=2.329 print_stall=0 extruder: target=220 temp=219.9 pwm=0.643
Stats 4208.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1776195 bytes_read=1576630 bytes_retransmit=0 bytes_invalid=0 send_seq=58706 receive_seq=58706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23950 bytes_read=75658 bytes_retransmit=0 bytes_invalid=0 send_seq=3966 receive_seq=3966 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999499 adj=49999118 sd_pos=237213 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=28.7 sysload=0.63 cputime=415.316 memavail=695424 print_time=4212.565 buffer_time=2.486 print_stall=0 extruder: target=220 temp=219.8 pwm=0.643
Stats 4209.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=1778359 bytes_read=1577316 bytes_retransmit=0 bytes_invalid=0 send_seq=58753 receive_seq=58752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23956 bytes_read=75674 bytes_retransmit=0 bytes_invalid=0 send_seq=3967 receive_seq=3967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999502 adj=49999125 sd_pos=237323 heater_bed: target=60 temp=60.1 pwm=0.036 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.63 cputime=415.462 memavail=695424 print_time=4213.152 buffer_time=2.073 print_stall=0 extruder: target=220 temp=219.7 pwm=0.643
Stats 4210.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1782229 bytes_read=1578143 bytes_retransmit=0 bytes_invalid=0 send_seq=58829 receive_seq=58829 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23962 bytes_read=75690 bytes_retransmit=0 bytes_invalid=0 send_seq=3968 receive_seq=3968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999497 adj=49999165 sd_pos=237545 heater_bed: target=60 temp=60.1 pwm=0.078 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.63 cputime=415.620 memavail=695004 print_time=4214.337 buffer_time=2.256 print_stall=0 extruder: target=220 temp=219.7 pwm=0.643
Stats 4211.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1786187 bytes_read=1578935 bytes_retransmit=0 bytes_invalid=0 send_seq=58905 receive_seq=58905 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23968 bytes_read=75706 bytes_retransmit=0 bytes_invalid=0 send_seq=3969 receive_seq=3969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999496 adj=49999121 sd_pos=237771 heater_bed: target=60 temp=60.1 pwm=0.164 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.6 sysload=0.63 cputime=415.786 memavail=695180 print_time=4215.534 buffer_time=2.453 print_stall=0 extruder: target=220 temp=219.8 pwm=0.630
Stats 4212.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1788305 bytes_read=1579621 bytes_retransmit=0 bytes_invalid=0 send_seq=58951 receive_seq=58951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=23974 bytes_read=75722 bytes_retransmit=0 bytes_invalid=0 send_seq=3970 receive_seq=3970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999514 adj=49999098 sd_pos=237883 heater_bed: target=60 temp=60.1 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.63 cputime=415.945 memavail=695180 print_time=4216.136 buffer_time=2.054 print_stall=0 extruder: target=220 temp=219.9 pwm=0.630
Stats 4213.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1792225 bytes_read=1580427 bytes_retransmit=0 bytes_invalid=0 send_seq=59027 receive_seq=59027 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23980 bytes_read=75751 bytes_retransmit=0 bytes_invalid=0 send_seq=3971 receive_seq=3971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49999319 sd_pos=238106 heater_bed: target=60 temp=60.0 pwm=0.156 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=0.74 cputime=416.155 memavail=695184 print_time=4217.342 buffer_time=2.260 print_stall=0 extruder: target=220 temp=220.0 pwm=0.630
Stats 4214.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1796131 bytes_read=1581219 bytes_retransmit=0 bytes_invalid=0 send_seq=59103 receive_seq=59103 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23986 bytes_read=75767 bytes_retransmit=0 bytes_invalid=0 send_seq=3972 receive_seq=3972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999514 adj=49999145 sd_pos=238331 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=41.3 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.74 cputime=416.360 memavail=695184 print_time=4218.547 buffer_time=2.464 print_stall=0 extruder: target=220 temp=220.0 pwm=0.575
Stats 4215.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1798229 bytes_read=1581905 bytes_retransmit=0 bytes_invalid=0 send_seq=59148 receive_seq=59148 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23992 bytes_read=75783 bytes_retransmit=0 bytes_invalid=0 send_seq=3973 receive_seq=3973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999166 sd_pos=238471 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.74 cputime=416.460 memavail=695184 print_time=4219.151 buffer_time=2.068 print_stall=0 extruder: target=220 temp=220.1 pwm=0.575
Stats 4216.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1802045 bytes_read=1582641 bytes_retransmit=0 bytes_invalid=0 send_seq=59222 receive_seq=59210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=159 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=23998 bytes_read=75799 bytes_retransmit=0 bytes_invalid=0 send_seq=3974 receive_seq=3974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999510 adj=49999149 sd_pos=238779 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=40.8 mcu_temp: temp=37.4 chamber: temp=28.7 sysload=0.74 cputime=416.642 memavail=694676 print_time=4220.379 buffer_time=2.293 print_stall=0 extruder: target=220 temp=220.1 pwm=0.575
Stats 4217.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1805357 bytes_read=1583438 bytes_retransmit=0 bytes_invalid=0 send_seq=59287 receive_seq=59287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24004 bytes_read=75815 bytes_retransmit=0 bytes_invalid=0 send_seq=3975 receive_seq=3975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999156 sd_pos=238948 heater_bed: target=60 temp=59.9 pwm=0.157 raspberry_pi: temp=40.2 mcu_temp: temp=37.7 chamber: temp=28.7 sysload=0.74 cputime=416.820 memavail=694692 print_time=4221.304 buffer_time=2.218 print_stall=0 extruder: target=220 temp=220.0 pwm=0.575
Stats 4218.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1808413 bytes_read=1584199 bytes_retransmit=0 bytes_invalid=0 send_seq=59348 receive_seq=59348 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001376 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24010 bytes_read=75844 bytes_retransmit=0 bytes_invalid=0 send_seq=3976 receive_seq=3976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999509 adj=49999028 sd_pos=239113 heater_bed: target=60 temp=59.9 pwm=0.206 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.9 sysload=0.92 cputime=416.992 memavail=694692 print_time=4222.228 buffer_time=2.140 print_stall=0 extruder: target=220 temp=220.0 pwm=0.629
Stats 4219.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1811456 bytes_read=1584935 bytes_retransmit=0 bytes_invalid=0 send_seq=59410 receive_seq=59410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24016 bytes_read=75860 bytes_retransmit=0 bytes_invalid=0 send_seq=3977 receive_seq=3977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49999022 sd_pos=239284 heater_bed: target=60 temp=60.0 pwm=0.088 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.9 sysload=0.92 cputime=417.178 memavail=694692 print_time=4223.157 buffer_time=2.069 print_stall=0 extruder: target=220 temp=219.8 pwm=0.629
Stats 4220.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1814571 bytes_read=1585668 bytes_retransmit=0 bytes_invalid=0 send_seq=59471 receive_seq=59471 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24022 bytes_read=75876 bytes_retransmit=0 bytes_invalid=0 send_seq=3978 receive_seq=3978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999079 sd_pos=239450 heater_bed: target=60 temp=59.9 pwm=0.154 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.9 sysload=0.92 cputime=417.326 memavail=694692 print_time=4224.090 buffer_time=2.001 print_stall=0 extruder: target=220 temp=219.7 pwm=0.688
Stats 4221.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1818629 bytes_read=1586502 bytes_retransmit=0 bytes_invalid=0 send_seq=59548 receive_seq=59548 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24028 bytes_read=75892 bytes_retransmit=0 bytes_invalid=0 send_seq=3979 receive_seq=3979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999057 sd_pos=239675 heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.9 sysload=0.92 cputime=417.527 memavail=694692 print_time=4225.342 buffer_time=2.253 print_stall=0 extruder: target=220 temp=219.6 pwm=0.688
Stats 4222.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1821790 bytes_read=1587229 bytes_retransmit=0 bytes_invalid=0 send_seq=59611 receive_seq=59611 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24034 bytes_read=75908 bytes_retransmit=0 bytes_invalid=0 send_seq=3980 receive_seq=3980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999501 adj=49999073 sd_pos=239846 heater_bed: target=60 temp=60.0 pwm=0.049 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=0.92 cputime=417.701 memavail=694704 print_time=4226.282 buffer_time=2.192 print_stall=0 extruder: target=220 temp=219.6 pwm=0.688
Stats 4223.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1824916 bytes_read=1587955 bytes_retransmit=0 bytes_invalid=0 send_seq=59674 receive_seq=59674 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24040 bytes_read=75937 bytes_retransmit=0 bytes_invalid=0 send_seq=3981 receive_seq=3981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999056 sd_pos=240010 heater_bed: target=60 temp=59.9 pwm=0.189 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.9 sysload=1.01 cputime=417.874 memavail=694704 print_time=4227.217 buffer_time=2.126 print_stall=0 extruder: target=220 temp=219.8 pwm=0.630
Stats 4224.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1827885 bytes_read=1588701 bytes_retransmit=0 bytes_invalid=0 send_seq=59732 receive_seq=59732 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24046 bytes_read=75953 bytes_retransmit=0 bytes_invalid=0 send_seq=3982 receive_seq=3982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999510 adj=49999211 sd_pos=240178 heater_bed: target=60 temp=60.0 pwm=0.019 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=1.01 cputime=418.045 memavail=694704 print_time=4228.150 buffer_time=2.059 print_stall=0 extruder: target=220 temp=219.9 pwm=0.630
Stats 4225.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1831608 bytes_read=1589437 bytes_retransmit=0 bytes_invalid=0 send_seq=59805 receive_seq=59793 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=219 stalled_bytes=0 freq=180001419 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24052 bytes_read=75969 bytes_retransmit=0 bytes_invalid=0 send_seq=3983 receive_seq=3983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49998890 sd_pos=240400 heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.0 sysload=1.01 cputime=418.211 memavail=694600 print_time=4229.390 buffer_time=2.292 print_stall=0 extruder: target=220 temp=220.3 pwm=0.559
Stats 4226.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1834828 bytes_read=1590224 bytes_retransmit=0 bytes_invalid=0 send_seq=59868 receive_seq=59868 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=180001407 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24058 bytes_read=75985 bytes_retransmit=0 bytes_invalid=0 send_seq=3984 receive_seq=3984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49998967 sd_pos=240564 heater_bed: target=60 temp=59.8 pwm=0.160 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.8 sysload=1.01 cputime=418.387 memavail=695200 print_time=4230.316 buffer_time=2.217 print_stall=0 extruder: target=220 temp=220.3 pwm=0.559
Stats 4227.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1838841 bytes_read=1591065 bytes_retransmit=0 bytes_invalid=0 send_seq=59945 receive_seq=59945 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001398 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24064 bytes_read=76001 bytes_retransmit=0 bytes_invalid=0 send_seq=3985 receive_seq=3985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49999019 sd_pos=240786 heater_bed: target=60 temp=59.9 pwm=0.108 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.7 sysload=1.01 cputime=418.586 memavail=695216 print_time=4231.548 buffer_time=2.448 print_stall=0 extruder: target=220 temp=220.2 pwm=0.559
Stats 4228.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1841032 bytes_read=1591731 bytes_retransmit=0 bytes_invalid=0 send_seq=59993 receive_seq=59993 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24070 bytes_read=76030 bytes_retransmit=0 bytes_invalid=0 send_seq=3986 receive_seq=3986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999501 adj=49999046 sd_pos=240897 heater_bed: target=60 temp=59.9 pwm=0.159 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=1.17 cputime=418.713 memavail=695220 print_time=4232.161 buffer_time=2.061 print_stall=0 extruder: target=220 temp=220.0 pwm=0.647
Stats 4229.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1844901 bytes_read=1592518 bytes_retransmit=0 bytes_invalid=0 send_seq=60068 receive_seq=60068 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24076 bytes_read=76046 bytes_retransmit=0 bytes_invalid=0 send_seq=3987 receive_seq=3987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999498 adj=49999061 sd_pos=241117 heater_bed: target=60 temp=59.9 pwm=0.159 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.7 sysload=1.17 cputime=418.860 memavail=695220 print_time=4233.381 buffer_time=2.280 print_stall=0 extruder: target=220 temp=219.9 pwm=0.647
Stats 4230.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1848804 bytes_read=1593365 bytes_retransmit=0 bytes_invalid=0 send_seq=60143 receive_seq=60143 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24082 bytes_read=76062 bytes_retransmit=0 bytes_invalid=0 send_seq=3988 receive_seq=3988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999496 adj=49999074 sd_pos=241337 heater_bed: target=60 temp=59.8 pwm=0.159 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.8 sysload=1.17 cputime=419.044 memavail=695220 print_time=4234.594 buffer_time=2.492 print_stall=0 extruder: target=220 temp=219.7 pwm=0.647
Stats 4231.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1850989 bytes_read=1594031 bytes_retransmit=0 bytes_invalid=0 send_seq=60191 receive_seq=60191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24088 bytes_read=76078 bytes_retransmit=0 bytes_invalid=0 send_seq=3989 receive_seq=3989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999493 adj=49999097 sd_pos=241447 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=40.2 mcu_temp: temp=37.6 chamber: temp=28.7 sysload=1.17 cputime=419.199 memavail=695232 print_time=4235.197 buffer_time=2.095 print_stall=0 extruder: target=220 temp=219.6 pwm=0.702
Stats 4232.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1854830 bytes_read=1594829 bytes_retransmit=0 bytes_invalid=0 send_seq=60266 receive_seq=60266 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24100 bytes_read=76110 bytes_retransmit=0 bytes_invalid=0 send_seq=3991 receive_seq=3991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999488 adj=49999112 sd_pos=241668 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=1.17 cputime=419.382 memavail=695232 print_time=4236.396 buffer_time=2.293 print_stall=0 extruder: target=220 temp=219.6 pwm=0.702
Stats 4233.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1858653 bytes_read=1595655 bytes_retransmit=0 bytes_invalid=0 send_seq=60340 receive_seq=60340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24106 bytes_read=76139 bytes_retransmit=0 bytes_invalid=0 send_seq=3992 receive_seq=3992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999488 adj=49999115 sd_pos=241887 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.7 sysload=1.23 cputime=419.533 memavail=695232 print_time=4237.585 buffer_time=2.481 print_stall=0 extruder: target=220 temp=219.7 pwm=0.702
Stats 4234.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1860592 bytes_read=1596296 bytes_retransmit=0 bytes_invalid=0 send_seq=60383 receive_seq=60383 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24112 bytes_read=76155 bytes_retransmit=0 bytes_invalid=0 send_seq=3993 receive_seq=3993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999487 adj=49999106 sd_pos=241998 heater_bed: target=60 temp=59.9 pwm=0.132 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.8 sysload=1.23 cputime=419.679 memavail=695232 print_time=4238.177 buffer_time=2.073 print_stall=0 extruder: target=220 temp=220.0 pwm=0.608
Stats 4235.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1864493 bytes_read=1597114 bytes_retransmit=0 bytes_invalid=0 send_seq=60461 receive_seq=60461 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24118 bytes_read=76171 bytes_retransmit=0 bytes_invalid=0 send_seq=3994 receive_seq=3994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999492 adj=49999107 sd_pos=242307 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=1.23 cputime=419.828 memavail=695232 print_time=4239.356 buffer_time=2.251 print_stall=0 extruder: target=220 temp=220.2 pwm=0.552
Stats 4236.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1868117 bytes_read=1597909 bytes_retransmit=0 bytes_invalid=0 send_seq=60531 receive_seq=60531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24124 bytes_read=76187 bytes_retransmit=0 bytes_invalid=0 send_seq=3995 receive_seq=3995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999489 adj=49999160 sd_pos=242528 heater_bed: target=60 temp=60.0 pwm=0.056 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.6 sysload=1.23 cputime=420.014 memavail=695636 print_time=4240.498 buffer_time=2.392 print_stall=0 extruder: target=220 temp=220.3 pwm=0.552
Stats 4237.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1871492 bytes_read=1598680 bytes_retransmit=0 bytes_invalid=0 send_seq=60600 receive_seq=60600 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24130 bytes_read=76203 bytes_retransmit=0 bytes_invalid=0 send_seq=3996 receive_seq=3996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999484 adj=49999114 sd_pos=242746 heater_bed: target=60 temp=59.8 pwm=0.196 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=1.23 cputime=420.182 memavail=695748 print_time=4241.620 buffer_time=2.514 print_stall=0 extruder: target=220 temp=220.3 pwm=0.552
Stats 4238.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1873306 bytes_read=1599302 bytes_retransmit=0 bytes_invalid=0 send_seq=60642 receive_seq=60642 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24136 bytes_read=76232 bytes_retransmit=0 bytes_invalid=0 send_seq=3997 receive_seq=3997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999485 adj=49999033 sd_pos=242856 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.7 sysload=1.21 cputime=420.318 memavail=695748 print_time=4242.172 buffer_time=2.065 print_stall=0 extruder: target=220 temp=220.2 pwm=0.606
Stats 4239.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1876681 bytes_read=1600103 bytes_retransmit=0 bytes_invalid=0 send_seq=60711 receive_seq=60711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24142 bytes_read=76248 bytes_retransmit=0 bytes_invalid=0 send_seq=3998 receive_seq=3998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999483 adj=49999039 sd_pos=243103 heater_bed: target=60 temp=59.8 pwm=0.212 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=1.21 cputime=420.504 memavail=695748 print_time=4243.259 buffer_time=2.152 print_stall=0 extruder: target=220 temp=220.1 pwm=0.606
Stats 4240.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1880192 bytes_read=1600895 bytes_retransmit=0 bytes_invalid=0 send_seq=60781 receive_seq=60781 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24148 bytes_read=76264 bytes_retransmit=0 bytes_invalid=0 send_seq=3999 receive_seq=3999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999482 adj=49999027 sd_pos=243349 heater_bed: target=60 temp=59.9 pwm=0.100 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.6 sysload=1.21 cputime=420.685 memavail=695752 print_time=4244.331 buffer_time=2.223 print_stall=0 extruder: target=220 temp=219.9 pwm=0.663
Stats 4241.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1883810 bytes_read=1601662 bytes_retransmit=0 bytes_invalid=0 send_seq=60852 receive_seq=60852 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24154 bytes_read=76280 bytes_retransmit=0 bytes_invalid=0 send_seq=4000 receive_seq=4000 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999480 adj=49999035 sd_pos=243571 heater_bed: target=60 temp=59.9 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.7 sysload=1.21 cputime=420.877 memavail=695752 print_time=4245.347 buffer_time=2.238 print_stall=0 extruder: target=220 temp=219.7 pwm=0.725
Stats 4242.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1887499 bytes_read=1602478 bytes_retransmit=0 bytes_invalid=0 send_seq=60924 receive_seq=60924 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24160 bytes_read=76296 bytes_retransmit=0 bytes_invalid=0 send_seq=4001 receive_seq=4001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999478 adj=49999050 sd_pos=243794 heater_bed: target=60 temp=59.8 pwm=0.171 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=28.5 sysload=1.21 cputime=421.056 memavail=695752 print_time=4246.339 buffer_time=2.229 print_stall=0 extruder: target=220 temp=219.6 pwm=0.725
Stats 4243.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1891211 bytes_read=1603264 bytes_retransmit=0 bytes_invalid=0 send_seq=60996 receive_seq=60996 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24166 bytes_read=76325 bytes_retransmit=0 bytes_invalid=0 send_seq=4002 receive_seq=4002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999476 adj=49999020 sd_pos=244013 heater_bed: target=60 temp=59.9 pwm=0.171 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.6 sysload=1.20 cputime=421.200 memavail=695760 print_time=4247.308 buffer_time=2.197 print_stall=0 extruder: target=220 temp=219.8 pwm=0.660
Stats 4244.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1894905 bytes_read=1604025 bytes_retransmit=0 bytes_invalid=0 send_seq=61068 receive_seq=61068 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24172 bytes_read=76341 bytes_retransmit=0 bytes_invalid=0 send_seq=4003 receive_seq=4003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999474 adj=49998984 sd_pos=244235 heater_bed: target=60 temp=59.9 pwm=0.171 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.6 sysload=1.20 cputime=421.327 memavail=695760 print_time=4248.250 buffer_time=2.138 print_stall=0 extruder: target=220 temp=220.0 pwm=0.601
Stats 4245.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1899049 bytes_read=1604894 bytes_retransmit=0 bytes_invalid=0 send_seq=61149 receive_seq=61149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24178 bytes_read=76357 bytes_retransmit=0 bytes_invalid=0 send_seq=4004 receive_seq=4004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999473 adj=49998974 sd_pos=244457 heater_bed: target=60 temp=59.9 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.5 sysload=1.20 cputime=421.500 memavail=695760 print_time=4249.156 buffer_time=2.043 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
Stats 4246.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1904262 bytes_read=1605801 bytes_retransmit=0 bytes_invalid=0 send_seq=61248 receive_seq=61248 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=669 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24184 bytes_read=76373 bytes_retransmit=0 bytes_invalid=0 send_seq=4005 receive_seq=4005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999471 adj=49999019 sd_pos=244789 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.5 sysload=1.20 cputime=421.681 memavail=696528 print_time=4250.442 buffer_time=2.320 print_stall=0 extruder: target=220 temp=220.5 pwm=0.548
Stats 4247.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1908495 bytes_read=1606598 bytes_retransmit=0 bytes_invalid=0 send_seq=61326 receive_seq=61325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=6 stalled_bytes=622 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24190 bytes_read=76389 bytes_retransmit=0 bytes_invalid=0 send_seq=4006 receive_seq=4006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999473 adj=49999015 sd_pos=245011 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.5 sysload=1.20 cputime=421.859 memavail=696528 print_time=4251.255 buffer_time=2.133 print_stall=0 extruder: target=220 temp=220.4 pwm=0.548
Stats 4248.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1913207 bytes_read=1607469 bytes_retransmit=0 bytes_invalid=0 send_seq=61408 receive_seq=61408 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=1857 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24196 bytes_read=76418 bytes_retransmit=0 bytes_invalid=0 send_seq=4007 receive_seq=4007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999471 adj=49998904 sd_pos=245375 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=28.6 sysload=1.18 cputime=422.084 memavail=696528 print_time=4252.407 buffer_time=2.284 print_stall=0 extruder: target=220 temp=220.4 pwm=0.548
Stats 4249.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=1918182 bytes_read=1608335 bytes_retransmit=0 bytes_invalid=0 send_seq=61496 receive_seq=61496 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=3130 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24202 bytes_read=76434 bytes_retransmit=0 bytes_invalid=0 send_seq=4008 receive_seq=4008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999470 adj=49998959 sd_pos=245742 heater_bed: target=60 temp=59.9 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.6 sysload=1.18 cputime=422.306 memavail=696404 print_time=4253.486 buffer_time=2.363 print_stall=0 extruder: target=220 temp=220.2 pwm=0.618
Stats 4250.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1923278 bytes_read=1609207 bytes_retransmit=0 bytes_invalid=0 send_seq=61587 receive_seq=61587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=5631 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24208 bytes_read=76450 bytes_retransmit=0 bytes_invalid=0 send_seq=4009 receive_seq=4009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999470 adj=49998986 sd_pos=246325 heater_bed: target=60 temp=59.9 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.6 sysload=1.18 cputime=422.525 memavail=696404 print_time=4254.547 buffer_time=2.423 print_stall=0 extruder: target=220 temp=220.0 pwm=0.618
Stats 4251.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1928980 bytes_read=1610163 bytes_retransmit=0 bytes_invalid=0 send_seq=61687 receive_seq=61687 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=7899 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24214 bytes_read=76466 bytes_retransmit=0 bytes_invalid=0 send_seq=4010 receive_seq=4010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999466 adj=49999025 sd_pos=246822 heater_bed: target=60 temp=59.9 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.4 sysload=1.18 cputime=422.726 memavail=696404 print_time=4255.594 buffer_time=2.469 print_stall=0 extruder: target=220 temp=219.8 pwm=0.691
Stats 4252.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1935840 bytes_read=1611159 bytes_retransmit=0 bytes_invalid=0 send_seq=61802 receive_seq=61801 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=6001 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24220 bytes_read=76482 bytes_retransmit=0 bytes_invalid=0 send_seq=4011 receive_seq=4011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999465 adj=49999013 sd_pos=247158 heater_bed: target=60 temp=59.8 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=28.4 sysload=1.18 cputime=422.898 memavail=696416 print_time=4256.201 buffer_time=2.075 print_stall=0 extruder: target=220 temp=219.6 pwm=0.691
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
Stats 4253.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1943599 bytes_read=1612220 bytes_retransmit=0 bytes_invalid=0 send_seq=61934 receive_seq=61933 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=8560 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24226 bytes_read=76511 bytes_retransmit=0 bytes_invalid=0 send_seq=4012 receive_seq=4012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999461 adj=49999005 sd_pos=248601 heater_bed: target=60 temp=59.9 pwm=0.115 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.3 sysload=1.25 cputime=423.364 memavail=696416 print_time=4257.464 buffer_time=2.338 print_stall=0 extruder: target=220 temp=219.7 pwm=0.691
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
Stats 4254.9: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=1951749 bytes_read=1613385 bytes_retransmit=0 bytes_invalid=0 send_seq=62072 receive_seq=62072 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=6660 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24232 bytes_read=76527 bytes_retransmit=0 bytes_invalid=0 send_seq=4013 receive_seq=4013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999463 adj=49999024 sd_pos=249257 heater_bed: target=60 temp=59.8 pwm=0.265 raspberry_pi: temp=41.3 mcu_temp: temp=37.5 chamber: temp=28.5 sysload=1.25 cputime=423.698 memavail=694776 print_time=4258.323 buffer_time=2.196 print_stall=0 extruder: target=220 temp=220.0 pwm=0.617
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4255.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1960666 bytes_read=1614557 bytes_retransmit=0 bytes_invalid=0 send_seq=62223 receive_seq=62223 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=5284 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24238 bytes_read=76543 bytes_retransmit=0 bytes_invalid=0 send_seq=4014 receive_seq=4014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999460 adj=49999047 sd_pos=250712 heater_bed: target=60 temp=59.9 pwm=0.208 raspberry_pi: temp=41.9 mcu_temp: temp=37.5 chamber: temp=28.4 sysload=1.25 cputime=424.011 memavail=694664 print_time=4259.409 buffer_time=2.280 print_stall=0 extruder: target=220 temp=220.2 pwm=0.539
Stats 4256.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1967488 bytes_read=1615569 bytes_retransmit=0 bytes_invalid=0 send_seq=62340 receive_seq=62340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=4910 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24244 bytes_read=76559 bytes_retransmit=0 bytes_invalid=0 send_seq=4015 receive_seq=4015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999461 adj=49999062 sd_pos=253437 heater_bed: target=60 temp=59.9 pwm=0.129 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.7 sysload=1.25 cputime=424.283 memavail=694336 print_time=4260.371 buffer_time=2.242 print_stall=0 extruder: target=220 temp=220.3 pwm=0.539
Stats 4257.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1974318 bytes_read=1616593 bytes_retransmit=0 bytes_invalid=0 send_seq=62456 receive_seq=62456 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=6200 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24250 bytes_read=76575 bytes_retransmit=0 bytes_invalid=0 send_seq=4016 receive_seq=4016 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999461 adj=49999086 sd_pos=256282 heater_bed: target=60 temp=60.0 pwm=0.009 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.5 sysload=1.25 cputime=424.512 memavail=694412 print_time=4261.548 buffer_time=2.419 print_stall=0 extruder: target=220 temp=220.5 pwm=0.479
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4258.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1981042 bytes_read=1617569 bytes_retransmit=0 bytes_invalid=0 send_seq=62571 receive_seq=62571 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=5834 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24256 bytes_read=76604 bytes_retransmit=0 bytes_invalid=0 send_seq=4017 receive_seq=4017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999463 adj=49999098 sd_pos=258816 heater_bed: target=60 temp=59.9 pwm=0.211 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.5 sysload=1.23 cputime=424.832 memavail=694412 print_time=4262.377 buffer_time=2.246 print_stall=0 extruder: target=220 temp=220.6 pwm=0.479
Stats 4259.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=1987601 bytes_read=1618566 bytes_retransmit=0 bytes_invalid=0 send_seq=62685 receive_seq=62685 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=6635 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24262 bytes_read=76619 bytes_retransmit=0 bytes_invalid=0 send_seq=4018 receive_seq=4018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999461 adj=49999078 sd_pos=261629 heater_bed: target=60 temp=59.9 pwm=0.169 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=28.3 sysload=1.23 cputime=425.051 memavail=694412 print_time=4263.513 buffer_time=2.382 print_stall=0 extruder: target=220 temp=220.4 pwm=0.554
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4261.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=1996569 bytes_read=1619781 bytes_retransmit=0 bytes_invalid=0 send_seq=62837 receive_seq=62836 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=6344 freq=180001377 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24268 bytes_read=76634 bytes_retransmit=0 bytes_invalid=0 send_seq=4019 receive_seq=4019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999458 adj=49999074 sd_pos=264339 heater_bed: target=60 temp=60.0 pwm=0.065 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.4 sysload=1.23 cputime=425.434 memavail=694376 print_time=4264.556 buffer_time=2.292 print_stall=0 extruder: target=220 temp=220.1 pwm=0.630
Stats 4262.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2003194 bytes_read=1620776 bytes_retransmit=0 bytes_invalid=0 send_seq=62949 receive_seq=62949 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=6402 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24274 bytes_read=76649 bytes_retransmit=0 bytes_invalid=0 send_seq=4020 receive_seq=4020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999457 adj=49998901 sd_pos=267347 heater_bed: target=60 temp=60.0 pwm=0.068 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.5 sysload=1.23 cputime=425.699 memavail=694424 print_time=4265.550 buffer_time=2.287 print_stall=0 extruder: target=220 temp=219.9 pwm=0.686
Stats 4263.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2010797 bytes_read=1621872 bytes_retransmit=0 bytes_invalid=0 send_seq=63080 receive_seq=63080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=6225 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24280 bytes_read=76664 bytes_retransmit=0 bytes_invalid=0 send_seq=4021 receive_seq=4021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999457 adj=49998938 sd_pos=270320 heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.7 sysload=1.23 cputime=425.925 memavail=694424 print_time=4266.612 buffer_time=2.347 print_stall=0 extruder: target=220 temp=219.8 pwm=0.636
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4264.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2018349 bytes_read=1622908 bytes_retransmit=0 bytes_invalid=0 send_seq=63208 receive_seq=63207 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=5238 freq=180001415 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24286 bytes_read=76692 bytes_retransmit=0 bytes_invalid=0 send_seq=4022 receive_seq=4022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999458 adj=49999003 sd_pos=272572 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.5 sysload=1.29 cputime=426.252 memavail=694312 print_time=4267.475 buffer_time=2.206 print_stall=0 extruder: target=220 temp=219.8 pwm=0.636
Stats 4265.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2024683 bytes_read=1623919 bytes_retransmit=0 bytes_invalid=0 send_seq=63318 receive_seq=63318 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=3760 freq=180001484 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24292 bytes_read=76708 bytes_retransmit=0 bytes_invalid=0 send_seq=4023 receive_seq=4023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999460 adj=49998826 sd_pos=274752 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=28.5 sysload=1.29 cputime=426.459 memavail=694680 print_time=4268.283 buffer_time=2.013 print_stall=0 extruder: target=220 temp=220.0 pwm=0.566
Stats 4266.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2032558 bytes_read=1625010 bytes_retransmit=0 bytes_invalid=0 send_seq=63451 receive_seq=63450 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=4070 freq=180001483 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24298 bytes_read=76724 bytes_retransmit=0 bytes_invalid=0 send_seq=4024 receive_seq=4024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999463 adj=49998613 sd_pos=278456 heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.5 sysload=1.29 cputime=426.744 memavail=694680 print_time=4269.613 buffer_time=2.322 print_stall=0 extruder: target=220 temp=220.3 pwm=0.491
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4267.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2038323 bytes_read=1625896 bytes_retransmit=0 bytes_invalid=0 send_seq=63549 receive_seq=63547 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=3160 freq=180001470 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24304 bytes_read=76740 bytes_retransmit=0 bytes_invalid=0 send_seq=4025 receive_seq=4025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999460 adj=49998813 sd_pos=280025 heater_bed: target=60 temp=60.1 pwm=0.088 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=28.7 sysload=1.29 cputime=426.966 memavail=694796 print_time=4270.303 buffer_time=2.011 print_stall=0 extruder: target=220 temp=220.4 pwm=0.491
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4268.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2044087 bytes_read=1626847 bytes_retransmit=0 bytes_invalid=0 send_seq=63647 receive_seq=63646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=5037 freq=180001448 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=24310 bytes_read=76756 bytes_retransmit=0 bytes_invalid=0 send_seq=4026 receive_seq=4026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999458 adj=49998825 sd_pos=280785 heater_bed: target=60 temp=60.1 pwm=0.152 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.7 sysload=1.29 cputime=427.221 memavail=694940 print_time=4271.821 buffer_time=2.521 print_stall=0 extruder: target=220 temp=220.5 pwm=0.491
Stats 4269.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2051769 bytes_read=1627912 bytes_retransmit=0 bytes_invalid=0 send_seq=63776 receive_seq=63776 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=2128 freq=180001436 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24316 bytes_read=76785 bytes_retransmit=0 bytes_invalid=0 send_seq=4027 receive_seq=4027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999458 adj=49998964 sd_pos=281126 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.9 sysload=1.27 cputime=427.408 memavail=694940 print_time=4272.766 buffer_time=2.444 print_stall=0 extruder: target=220 temp=220.3 pwm=0.551
Stats 4270.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2056852 bytes_read=1628761 bytes_retransmit=0 bytes_invalid=0 send_seq=63866 receive_seq=63865 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=1843 freq=180001424 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24322 bytes_read=76801 bytes_retransmit=0 bytes_invalid=0 send_seq=4028 receive_seq=4028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999457 adj=49999019 sd_pos=281469 heater_bed: target=60 temp=60.1 pwm=0.058 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=28.8 sysload=1.27 cputime=427.576 memavail=695180 print_time=4273.817 buffer_time=2.495 print_stall=0 extruder: target=220 temp=220.0 pwm=0.634
Stats 4271.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2061653 bytes_read=1629639 bytes_retransmit=0 bytes_invalid=0 send_seq=63951 receive_seq=63951 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=623 freq=180001406 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24328 bytes_read=76817 bytes_retransmit=0 bytes_invalid=0 send_seq=4029 receive_seq=4029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999455 adj=49999045 sd_pos=281832 heater_bed: target=60 temp=60.1 pwm=0.150 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=28.8 sysload=1.27 cputime=427.716 memavail=695196 print_time=4274.608 buffer_time=2.285 print_stall=0 extruder: target=220 temp=219.9 pwm=0.634
Stats 4272.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2065649 bytes_read=1630414 bytes_retransmit=0 bytes_invalid=0 send_seq=64023 receive_seq=64023 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001473 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24334 bytes_read=76833 bytes_retransmit=0 bytes_invalid=0 send_seq=4030 receive_seq=4030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999456 adj=49999085 sd_pos=282082 heater_bed: target=60 temp=60.1 pwm=0.126 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=29.0 sysload=1.27 cputime=427.897 memavail=695196 print_time=4275.432 buffer_time=2.107 print_stall=0 extruder: target=220 temp=219.7 pwm=0.634
Stats 4273.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2069382 bytes_read=1631176 bytes_retransmit=0 bytes_invalid=0 send_seq=64093 receive_seq=64093 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24340 bytes_read=76849 bytes_retransmit=0 bytes_invalid=0 send_seq=4031 receive_seq=4031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999460 adj=49998860 sd_pos=282505 heater_bed: target=60 temp=60.2 pwm=0.074 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=28.9 sysload=1.27 cputime=428.077 memavail=695192 print_time=4276.334 buffer_time=2.009 print_stall=0 extruder: target=220 temp=219.7 pwm=0.634
Stats 4274.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2074223 bytes_read=1632072 bytes_retransmit=0 bytes_invalid=0 send_seq=64181 receive_seq=64181 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001455 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24346 bytes_read=76878 bytes_retransmit=0 bytes_invalid=0 send_seq=4032 receive_seq=4032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999461 adj=49998954 sd_pos=282895 heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=28.9 sysload=1.24 cputime=428.255 memavail=695208 print_time=4277.712 buffer_time=2.386 print_stall=0 extruder: target=220 temp=219.7 pwm=0.634
Stats 4275.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2077401 bytes_read=1632828 bytes_retransmit=0 bytes_invalid=0 send_seq=64247 receive_seq=64247 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=180001436 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24352 bytes_read=76894 bytes_retransmit=0 bytes_invalid=0 send_seq=4033 receive_seq=4033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999462 adj=49999046 sd_pos=283121 heater_bed: target=60 temp=60.1 pwm=0.137 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.1 sysload=1.24 cputime=428.429 memavail=695208 print_time=4278.690 buffer_time=2.364 print_stall=0 extruder: target=220 temp=219.8 pwm=0.574
Stats 4276.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2080574 bytes_read=1633560 bytes_retransmit=0 bytes_invalid=0 send_seq=64310 receive_seq=64310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=180001423 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24358 bytes_read=76910 bytes_retransmit=0 bytes_invalid=0 send_seq=4034 receive_seq=4034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999463 adj=49999119 sd_pos=283347 heater_bed: target=60 temp=60.2 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.0 sysload=1.24 cputime=428.613 memavail=695088 print_time=4279.707 buffer_time=2.380 print_stall=0 extruder: target=220 temp=219.8 pwm=0.574
Stats 4277.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2083874 bytes_read=1634346 bytes_retransmit=0 bytes_invalid=0 send_seq=64376 receive_seq=64376 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=180001406 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24364 bytes_read=76926 bytes_retransmit=0 bytes_invalid=0 send_seq=4035 receive_seq=4035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999461 adj=49999159 sd_pos=283571 heater_bed: target=60 temp=60.2 pwm=0.128 raspberry_pi: temp=40.8 mcu_temp: temp=37.5 chamber: temp=29.2 sysload=1.24 cputime=428.761 memavail=695208 print_time=4280.753 buffer_time=2.426 print_stall=0 extruder: target=220 temp=219.8 pwm=0.574
Stats 4278.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2087385 bytes_read=1635127 bytes_retransmit=0 bytes_invalid=0 send_seq=64447 receive_seq=64447 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001406 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24370 bytes_read=76942 bytes_retransmit=0 bytes_invalid=0 send_seq=4036 receive_seq=4036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999463 adj=49999176 sd_pos=283798 heater_bed: target=60 temp=60.2 pwm=0.056 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.2 sysload=1.24 cputime=428.942 memavail=695212 print_time=4281.828 buffer_time=2.500 print_stall=0 extruder: target=220 temp=219.6 pwm=0.643
Stats 4279.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2089273 bytes_read=1635754 bytes_retransmit=0 bytes_invalid=0 send_seq=64490 receive_seq=64490 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24376 bytes_read=76971 bytes_retransmit=0 bytes_invalid=0 send_seq=4037 receive_seq=4037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999465 adj=49999177 sd_pos=283912 heater_bed: target=60 temp=60.2 pwm=0.112 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.1 sysload=1.22 cputime=429.083 memavail=695204 print_time=4282.375 buffer_time=2.048 print_stall=0 extruder: target=220 temp=219.6 pwm=0.643
Stats 4280.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2092867 bytes_read=1636584 bytes_retransmit=0 bytes_invalid=0 send_seq=64562 receive_seq=64562 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24382 bytes_read=76987 bytes_retransmit=0 bytes_invalid=0 send_seq=4038 receive_seq=4038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999464 adj=49999251 sd_pos=284138 heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.3 sysload=1.22 cputime=429.236 memavail=695220 print_time=4283.490 buffer_time=2.161 print_stall=0 extruder: target=220 temp=219.4 pwm=0.727
Stats 4281.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2096504 bytes_read=1637382 bytes_retransmit=0 bytes_invalid=0 send_seq=64636 receive_seq=64636 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24388 bytes_read=77003 bytes_retransmit=0 bytes_invalid=0 send_seq=4039 receive_seq=4039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999462 adj=49999257 sd_pos=284364 heater_bed: target=60 temp=60.2 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.2 sysload=1.22 cputime=429.419 memavail=695220 print_time=4284.637 buffer_time=2.307 print_stall=0 extruder: target=220 temp=219.3 pwm=0.727
Stats 4282.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2100144 bytes_read=1638169 bytes_retransmit=0 bytes_invalid=0 send_seq=64708 receive_seq=64708 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24394 bytes_read=77019 bytes_retransmit=0 bytes_invalid=0 send_seq=4040 receive_seq=4040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999465 adj=49999241 sd_pos=284591 heater_bed: target=60 temp=60.2 pwm=0.113 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=29.4 sysload=1.22 cputime=429.612 memavail=695188 print_time=4285.827 buffer_time=2.496 print_stall=0 extruder: target=220 temp=219.4 pwm=0.727
Stats 4283.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2102168 bytes_read=1638859 bytes_retransmit=0 bytes_invalid=0 send_seq=64755 receive_seq=64755 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24400 bytes_read=77035 bytes_retransmit=0 bytes_invalid=0 send_seq=4041 receive_seq=4041 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999464 adj=49999258 sd_pos=284703 heater_bed: target=60 temp=60.2 pwm=0.113 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.5 sysload=1.22 cputime=429.716 memavail=695220 print_time=4286.431 buffer_time=2.100 print_stall=0 extruder: target=220 temp=219.6 pwm=0.672
Stats 4284.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2104926 bytes_read=1639566 bytes_retransmit=0 bytes_invalid=0 send_seq=64814 receive_seq=64814 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24406 bytes_read=77064 bytes_retransmit=0 bytes_invalid=0 send_seq=4042 receive_seq=4042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999465 adj=49999299 sd_pos=284873 heater_bed: target=60 temp=60.2 pwm=0.057 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.6 sysload=1.29 cputime=429.847 memavail=695220 print_time=4287.354 buffer_time=2.022 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
Stats 4285.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2108405 bytes_read=1640338 bytes_retransmit=0 bytes_invalid=0 send_seq=64883 receive_seq=64883 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24412 bytes_read=77080 bytes_retransmit=0 bytes_invalid=0 send_seq=4043 receive_seq=4043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999465 adj=49999348 sd_pos=285102 heater_bed: target=60 temp=60.2 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.5 sysload=1.29 cputime=430.045 memavail=695232 print_time=4288.613 buffer_time=2.280 print_stall=0 extruder: target=220 temp=220.0 pwm=0.601
Stats 4286.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2111305 bytes_read=1641104 bytes_retransmit=0 bytes_invalid=0 send_seq=64942 receive_seq=64942 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24418 bytes_read=77096 bytes_retransmit=0 bytes_invalid=0 send_seq=4044 receive_seq=4044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999469 adj=49999271 sd_pos=285275 heater_bed: target=60 temp=60.2 pwm=0.114 raspberry_pi: temp=41.9 mcu_temp: temp=37.6 chamber: temp=29.6 sysload=1.29 cputime=430.230 memavail=695232 print_time=4289.577 buffer_time=2.244 print_stall=0 extruder: target=220 temp=220.2 pwm=0.601
Stats 4287.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2114078 bytes_read=1641800 bytes_retransmit=0 bytes_invalid=0 send_seq=65001 receive_seq=65001 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24424 bytes_read=77112 bytes_retransmit=0 bytes_invalid=0 send_seq=4045 receive_seq=4045 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999469 adj=49999294 sd_pos=285447 heater_bed: target=60 temp=60.2 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.7 sysload=1.29 cputime=430.407 memavail=695444 print_time=4290.565 buffer_time=2.230 print_stall=0 extruder: target=220 temp=220.2 pwm=0.601
Stats 4288.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2116805 bytes_read=1642502 bytes_retransmit=0 bytes_invalid=0 send_seq=65056 receive_seq=65056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24430 bytes_read=77128 bytes_retransmit=0 bytes_invalid=0 send_seq=4046 receive_seq=4046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999470 adj=49999305 sd_pos=285619 heater_bed: target=60 temp=60.2 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.29 cputime=430.591 memavail=695164 print_time=4291.565 buffer_time=2.231 print_stall=0 extruder: target=220 temp=220.0 pwm=0.601
Stats 4289.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2119527 bytes_read=1643232 bytes_retransmit=0 bytes_invalid=0 send_seq=65111 receive_seq=65111 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24436 bytes_read=77157 bytes_retransmit=0 bytes_invalid=0 send_seq=4047 receive_seq=4047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999472 adj=49999306 sd_pos=285841 heater_bed: target=60 temp=60.2 pwm=0.102 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.18 cputime=430.784 memavail=695244 print_time=4292.596 buffer_time=2.260 print_stall=0 extruder: target=220 temp=219.8 pwm=0.707
Stats 4290.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2122303 bytes_read=1643924 bytes_retransmit=0 bytes_invalid=0 send_seq=65167 receive_seq=65167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24442 bytes_read=77173 bytes_retransmit=0 bytes_invalid=0 send_seq=4048 receive_seq=4048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999473 adj=49999292 sd_pos=286015 heater_bed: target=60 temp=60.2 pwm=0.102 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.7 sysload=1.18 cputime=430.964 memavail=695244 print_time=4293.626 buffer_time=2.289 print_stall=0 extruder: target=220 temp=219.7 pwm=0.707
Stats 4291.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2124993 bytes_read=1644582 bytes_retransmit=0 bytes_invalid=0 send_seq=65222 receive_seq=65210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=134 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24448 bytes_read=77189 bytes_retransmit=0 bytes_invalid=0 send_seq=4049 receive_seq=4049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999474 adj=49999286 sd_pos=286213 heater_bed: target=60 temp=60.3 pwm=0.075 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.18 cputime=431.110 memavail=695244 print_time=4294.680 buffer_time=2.330 print_stall=0 extruder: target=220 temp=219.7 pwm=0.707
Stats 4292.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2127117 bytes_read=1645338 bytes_retransmit=0 bytes_invalid=0 send_seq=65268 receive_seq=65268 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24460 bytes_read=77221 bytes_retransmit=0 bytes_invalid=0 send_seq=4051 receive_seq=4051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999477 adj=49999277 sd_pos=286327 heater_bed: target=60 temp=60.3 pwm=0.075 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.8 sysload=1.18 cputime=431.271 memavail=695244 print_time=4295.371 buffer_time=2.019 print_stall=0 extruder: target=220 temp=219.7 pwm=0.707
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4293.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2130194 bytes_read=1646060 bytes_retransmit=0 bytes_invalid=0 send_seq=65330 receive_seq=65330 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24466 bytes_read=77237 bytes_retransmit=0 bytes_invalid=0 send_seq=4052 receive_seq=4052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999477 adj=49999336 sd_pos=286702 heater_bed: target=60 temp=60.3 pwm=0.073 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.18 cputime=431.595 memavail=695244 print_time=4296.472 buffer_time=2.119 print_stall=0 extruder: target=220 temp=219.8 pwm=0.652
Stats 4294.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2133127 bytes_read=1646768 bytes_retransmit=0 bytes_invalid=0 send_seq=65389 receive_seq=65389 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24472 bytes_read=77266 bytes_retransmit=0 bytes_invalid=0 send_seq=4053 receive_seq=4053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999478 adj=49999310 sd_pos=286870 heater_bed: target=60 temp=60.2 pwm=0.194 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.09 cputime=431.735 memavail=695104 print_time=4297.541 buffer_time=2.188 print_stall=0 extruder: target=220 temp=219.8 pwm=0.652
Stats 4295.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2135926 bytes_read=1647501 bytes_retransmit=0 bytes_invalid=0 send_seq=65446 receive_seq=65446 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001283 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24478 bytes_read=77282 bytes_retransmit=0 bytes_invalid=0 send_seq=4054 receive_seq=4054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999480 adj=49999264 sd_pos=287039 heater_bed: target=60 temp=60.2 pwm=0.095 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.9 sysload=1.09 cputime=431.928 memavail=695256 print_time=4298.625 buffer_time=2.271 print_stall=0 extruder: target=220 temp=220.0 pwm=0.652
Stats 4296.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2138733 bytes_read=1648204 bytes_retransmit=0 bytes_invalid=0 send_seq=65504 receive_seq=65501 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24484 bytes_read=77298 bytes_retransmit=0 bytes_invalid=0 send_seq=4055 receive_seq=4055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999498 adj=49999256 sd_pos=287238 heater_bed: target=60 temp=60.2 pwm=0.036 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.0 sysload=1.09 cputime=432.118 memavail=695256 print_time=4299.713 buffer_time=2.338 print_stall=0 extruder: target=220 temp=220.1 pwm=0.652
Stats 4297.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2140744 bytes_read=1648890 bytes_retransmit=0 bytes_invalid=0 send_seq=65547 receive_seq=65547 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24490 bytes_read=77314 bytes_retransmit=0 bytes_invalid=0 send_seq=4056 receive_seq=4056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999499 adj=49999418 sd_pos=287348 heater_bed: target=60 temp=60.2 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.9 sysload=1.09 cputime=432.276 memavail=695112 print_time=4300.441 buffer_time=2.066 print_stall=0 extruder: target=220 temp=220.2 pwm=0.652
Stats 4298.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2143620 bytes_read=1649601 bytes_retransmit=0 bytes_invalid=0 send_seq=65604 receive_seq=65604 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24496 bytes_read=77330 bytes_retransmit=0 bytes_invalid=0 send_seq=4057 receive_seq=4057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999499 adj=49999401 sd_pos=287514 heater_bed: target=60 temp=60.2 pwm=0.053 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.2 sysload=1.09 cputime=432.454 memavail=695256 print_time=4301.535 buffer_time=2.159 print_stall=0 extruder: target=220 temp=220.2 pwm=0.610
Stats 4299.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2146420 bytes_read=1650298 bytes_retransmit=0 bytes_invalid=0 send_seq=65661 receive_seq=65661 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=24502 bytes_read=77359 bytes_retransmit=0 bytes_invalid=0 send_seq=4058 receive_seq=4058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999498 adj=49999349 sd_pos=287683 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=30.1 sysload=1.16 cputime=432.631 memavail=695256 print_time=4302.633 buffer_time=2.255 print_stall=0 extruder: target=220 temp=220.2 pwm=0.610
Stats 4300.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2149189 bytes_read=1650979 bytes_retransmit=0 bytes_invalid=0 send_seq=65718 receive_seq=65706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=119 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=24508 bytes_read=77375 bytes_retransmit=0 bytes_invalid=0 send_seq=4059 receive_seq=4059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999499 adj=49999278 sd_pos=287849 heater_bed: target=60 temp=60.2 pwm=0.046 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.2 sysload=1.16 cputime=432.815 memavail=695268 print_time=4303.727 buffer_time=2.340 print_stall=0 extruder: target=220 temp=220.1 pwm=0.610
Stats 4301.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2151363 bytes_read=1651716 bytes_retransmit=0 bytes_invalid=0 send_seq=65765 receive_seq=65765 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=24514 bytes_read=77391 bytes_retransmit=0 bytes_invalid=0 send_seq=4060 receive_seq=4060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999497 adj=49999264 sd_pos=287963 heater_bed: target=60 temp=60.2 pwm=0.005 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.16 cputime=432.979 memavail=695268 print_time=4304.457 buffer_time=2.068 print_stall=0 extruder: target=220 temp=219.9 pwm=0.672
Stats 4302.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2154264 bytes_read=1652418 bytes_retransmit=0 bytes_invalid=0 send_seq=65823 receive_seq=65823 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=24520 bytes_read=77407 bytes_retransmit=0 bytes_invalid=0 send_seq=4061 receive_seq=4061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999500 adj=49999231 sd_pos=288133 heater_bed: target=60 temp=60.2 pwm=0.073 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.16 cputime=433.160 memavail=695268 print_time=4305.549 buffer_time=2.160 print_stall=0 extruder: target=220 temp=219.7 pwm=0.736
Stats 4303.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2157250 bytes_read=1653168 bytes_retransmit=0 bytes_invalid=0 send_seq=65884 receive_seq=65884 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=24526 bytes_read=77423 bytes_retransmit=0 bytes_invalid=0 send_seq=4062 receive_seq=4062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999008 sd_pos=288301 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.9 sysload=1.16 cputime=433.339 memavail=695028 print_time=4306.635 buffer_time=2.244 print_stall=0 extruder: target=220 temp=219.7 pwm=0.681
Stats 4304.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2160196 bytes_read=1653894 bytes_retransmit=0 bytes_invalid=0 send_seq=65944 receive_seq=65944 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24532 bytes_read=77452 bytes_retransmit=0 bytes_invalid=0 send_seq=4063 receive_seq=4063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999112 sd_pos=288468 heater_bed: target=60 temp=60.1 pwm=0.084 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.07 cputime=433.519 memavail=695028 print_time=4307.716 buffer_time=2.321 print_stall=0 extruder: target=220 temp=219.7 pwm=0.681
Stats 4305.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2162291 bytes_read=1654526 bytes_retransmit=0 bytes_invalid=0 send_seq=65988 receive_seq=65988 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24538 bytes_read=77468 bytes_retransmit=0 bytes_invalid=0 send_seq=4064 receive_seq=4064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999125 sd_pos=288581 heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.0 sysload=1.07 cputime=433.626 memavail=695028 print_time=4308.432 buffer_time=2.036 print_stall=0 extruder: target=220 temp=219.7 pwm=0.681
Stats 4306.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2165123 bytes_read=1655283 bytes_retransmit=0 bytes_invalid=0 send_seq=66045 receive_seq=66045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24544 bytes_read=77484 bytes_retransmit=0 bytes_invalid=0 send_seq=4065 receive_seq=4065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999202 sd_pos=288752 heater_bed: target=60 temp=59.9 pwm=0.153 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.07 cputime=433.762 memavail=695028 print_time=4309.500 buffer_time=2.098 print_stall=0 extruder: target=220 temp=219.8 pwm=0.681
Stats 4307.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2168083 bytes_read=1656004 bytes_retransmit=0 bytes_invalid=0 send_seq=66104 receive_seq=66104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24550 bytes_read=77500 bytes_retransmit=0 bytes_invalid=0 send_seq=4066 receive_seq=4066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999147 sd_pos=288923 heater_bed: target=60 temp=59.9 pwm=0.124 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.07 cputime=433.936 memavail=695280 print_time=4310.563 buffer_time=2.161 print_stall=0 extruder: target=220 temp=219.9 pwm=0.678
Stats 4308.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2171077 bytes_read=1656716 bytes_retransmit=0 bytes_invalid=0 send_seq=66164 receive_seq=66164 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24556 bytes_read=77516 bytes_retransmit=0 bytes_invalid=0 send_seq=4067 receive_seq=4067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999176 sd_pos=289119 heater_bed: target=60 temp=59.9 pwm=0.198 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.07 cputime=434.114 memavail=695280 print_time=4311.624 buffer_time=2.221 print_stall=0 extruder: target=220 temp=220.0 pwm=0.678
Stats 4309.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2174224 bytes_read=1657492 bytes_retransmit=0 bytes_invalid=0 send_seq=66228 receive_seq=66228 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=24562 bytes_read=77545 bytes_retransmit=0 bytes_invalid=0 send_seq=4068 receive_seq=4068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999132 sd_pos=289315 heater_bed: target=60 temp=59.9 pwm=0.074 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.98 cputime=434.299 memavail=694796 print_time=4312.687 buffer_time=2.283 print_stall=0 extruder: target=220 temp=220.1 pwm=0.678
Stats 4310.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2177225 bytes_read=1658223 bytes_retransmit=0 bytes_invalid=0 send_seq=66289 receive_seq=66289 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=24568 bytes_read=77561 bytes_retransmit=0 bytes_invalid=0 send_seq=4069 receive_seq=4069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999137 sd_pos=289569 heater_bed: target=60 temp=59.8 pwm=0.160 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.98 cputime=434.484 memavail=694796 print_time=4313.735 buffer_time=2.320 print_stall=0 extruder: target=220 temp=220.2 pwm=0.624
Stats 4311.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2179323 bytes_read=1658881 bytes_retransmit=0 bytes_invalid=0 send_seq=66335 receive_seq=66335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=24574 bytes_read=77577 bytes_retransmit=0 bytes_invalid=0 send_seq=4070 receive_seq=4070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999164 sd_pos=289681 heater_bed: target=60 temp=59.8 pwm=0.160 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=0.98 cputime=434.639 memavail=694796 print_time=4314.424 buffer_time=2.007 print_stall=0 extruder: target=220 temp=220.2 pwm=0.624
Stats 4312.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2182420 bytes_read=1659652 bytes_retransmit=0 bytes_invalid=0 send_seq=66398 receive_seq=66398 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=24580 bytes_read=77593 bytes_retransmit=0 bytes_invalid=0 send_seq=4071 receive_seq=4071 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999067 sd_pos=289850 heater_bed: target=60 temp=59.8 pwm=0.146 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.98 cputime=434.822 memavail=694800 print_time=4315.446 buffer_time=2.028 print_stall=0 extruder: target=220 temp=220.3 pwm=0.624
Stats 4313.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2185458 bytes_read=1660388 bytes_retransmit=0 bytes_invalid=0 send_seq=66460 receive_seq=66460 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001344 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=24586 bytes_read=77609 bytes_retransmit=0 bytes_invalid=0 send_seq=4072 receive_seq=4072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999503 adj=49999104 sd_pos=290047 heater_bed: target=60 temp=59.8 pwm=0.147 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=30.0 sysload=0.98 cputime=434.998 memavail=694800 print_time=4316.451 buffer_time=2.033 print_stall=0 extruder: target=220 temp=220.3 pwm=0.624
Stats 4314.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2188565 bytes_read=1661115 bytes_retransmit=0 bytes_invalid=0 send_seq=66523 receive_seq=66523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24592 bytes_read=77638 bytes_retransmit=0 bytes_invalid=0 send_seq=4073 receive_seq=4073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999127 sd_pos=290244 heater_bed: target=60 temp=59.9 pwm=0.092 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.1 sysload=0.90 cputime=435.172 memavail=694800 print_time=4317.437 buffer_time=2.018 print_stall=0 extruder: target=220 temp=220.2 pwm=0.646
Stats 4315.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2192338 bytes_read=1661890 bytes_retransmit=0 bytes_invalid=0 send_seq=66596 receive_seq=66584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=190 stalled_bytes=0 freq=180001372 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24598 bytes_read=77654 bytes_retransmit=0 bytes_invalid=0 send_seq=4074 receive_seq=4074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999182 sd_pos=290496 heater_bed: target=60 temp=59.8 pwm=0.195 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=0.90 cputime=435.365 memavail=694744 print_time=4318.743 buffer_time=2.309 print_stall=0 extruder: target=220 temp=220.0 pwm=0.699
Stats 4316.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2195443 bytes_read=1662693 bytes_retransmit=0 bytes_invalid=0 send_seq=66659 receive_seq=66659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24604 bytes_read=77670 bytes_retransmit=0 bytes_invalid=0 send_seq=4075 receive_seq=4075 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999064 sd_pos=290666 heater_bed: target=60 temp=59.8 pwm=0.195 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=0.90 cputime=435.539 memavail=694732 print_time=4319.708 buffer_time=2.272 print_stall=0 extruder: target=220 temp=219.9 pwm=0.699
Stats 4317.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2199479 bytes_read=1663502 bytes_retransmit=0 bytes_invalid=0 send_seq=66736 receive_seq=66736 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24610 bytes_read=77686 bytes_retransmit=0 bytes_invalid=0 send_seq=4076 receive_seq=4076 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999175 sd_pos=290918 heater_bed: target=60 temp=59.8 pwm=0.123 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=0.90 cputime=435.733 memavail=694808 print_time=4320.961 buffer_time=2.525 print_stall=0 extruder: target=220 temp=219.9 pwm=0.699
Stats 4318.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2201719 bytes_read=1664186 bytes_retransmit=0 bytes_invalid=0 send_seq=66785 receive_seq=66785 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24616 bytes_read=77702 bytes_retransmit=0 bytes_invalid=0 send_seq=4077 receive_seq=4077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999514 adj=49999164 sd_pos=291030 heater_bed: target=60 temp=59.8 pwm=0.120 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.90 cputime=435.880 memavail=695064 print_time=4321.563 buffer_time=2.126 print_stall=0 extruder: target=220 temp=219.8 pwm=0.699
Stats 4319.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2205645 bytes_read=1664966 bytes_retransmit=0 bytes_invalid=0 send_seq=66861 receive_seq=66861 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24622 bytes_read=77731 bytes_retransmit=0 bytes_invalid=0 send_seq=4078 receive_seq=4078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999223 sd_pos=291250 heater_bed: target=60 temp=59.8 pwm=0.120 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.0 sysload=0.83 cputime=436.057 memavail=695064 print_time=4322.719 buffer_time=2.281 print_stall=0 extruder: target=220 temp=219.9 pwm=0.648
Stats 4320.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2209524 bytes_read=1665773 bytes_retransmit=0 bytes_invalid=0 send_seq=66937 receive_seq=66937 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24628 bytes_read=77747 bytes_retransmit=0 bytes_invalid=0 send_seq=4079 receive_seq=4079 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49999217 sd_pos=291501 heater_bed: target=60 temp=59.8 pwm=0.120 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.83 cputime=436.239 memavail=695064 print_time=4323.798 buffer_time=2.360 print_stall=0 extruder: target=220 temp=220.2 pwm=0.596
Stats 4321.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2213510 bytes_read=1666629 bytes_retransmit=0 bytes_invalid=0 send_seq=67014 receive_seq=67014 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24634 bytes_read=77763 bytes_retransmit=0 bytes_invalid=0 send_seq=4080 receive_seq=4080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999510 adj=49999202 sd_pos=291722 heater_bed: target=60 temp=59.8 pwm=0.120 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.83 cputime=436.412 memavail=694960 print_time=4324.830 buffer_time=2.391 print_stall=0 extruder: target=220 temp=220.2 pwm=0.596
Stats 4322.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2217630 bytes_read=1667436 bytes_retransmit=0 bytes_invalid=0 send_seq=67093 receive_seq=67093 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24640 bytes_read=77779 bytes_retransmit=0 bytes_invalid=0 send_seq=4081 receive_seq=4081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999193 sd_pos=292054 heater_bed: target=60 temp=59.8 pwm=0.151 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.83 cputime=436.604 memavail=695072 print_time=4325.849 buffer_time=2.409 print_stall=0 extruder: target=220 temp=220.3 pwm=0.596
Stats 4323.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2221728 bytes_read=1668258 bytes_retransmit=0 bytes_invalid=0 send_seq=67172 receive_seq=67172 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=176 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24646 bytes_read=77795 bytes_retransmit=0 bytes_invalid=0 send_seq=4082 receive_seq=4082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999178 sd_pos=292298 heater_bed: target=60 temp=59.9 pwm=0.096 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.83 cputime=436.762 memavail=695072 print_time=4326.813 buffer_time=2.373 print_stall=0 extruder: target=220 temp=220.2 pwm=0.596
Stats 4324.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2225838 bytes_read=1669093 bytes_retransmit=0 bytes_invalid=0 send_seq=67248 receive_seq=67248 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=194 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24652 bytes_read=77824 bytes_retransmit=0 bytes_invalid=0 send_seq=4083 receive_seq=4083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999180 sd_pos=292511 heater_bed: target=60 temp=59.9 pwm=0.096 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.84 cputime=436.934 memavail=695060 print_time=4327.729 buffer_time=2.287 print_stall=0 extruder: target=220 temp=220.0 pwm=0.648
Stats 4325.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2230134 bytes_read=1669910 bytes_retransmit=0 bytes_invalid=0 send_seq=67329 receive_seq=67329 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=129 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24658 bytes_read=77840 bytes_retransmit=0 bytes_invalid=0 send_seq=4084 receive_seq=4084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999111 sd_pos=292726 heater_bed: target=60 temp=59.9 pwm=0.096 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=0.84 cputime=437.122 memavail=695076 print_time=4328.614 buffer_time=2.171 print_stall=0 extruder: target=220 temp=219.8 pwm=0.702
Stats 4326.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2234255 bytes_read=1670738 bytes_retransmit=0 bytes_invalid=0 send_seq=67406 receive_seq=67406 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=376 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24664 bytes_read=77856 bytes_retransmit=0 bytes_invalid=0 send_seq=4085 receive_seq=4085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999152 sd_pos=292958 heater_bed: target=60 temp=60.0 pwm=0.064 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=0.84 cputime=437.310 memavail=695076 print_time=4329.457 buffer_time=2.014 print_stall=0 extruder: target=220 temp=219.7 pwm=0.702
Stats 4327.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2239226 bytes_read=1671628 bytes_retransmit=0 bytes_invalid=0 send_seq=67493 receive_seq=67493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=1801 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24670 bytes_read=77872 bytes_retransmit=0 bytes_invalid=0 send_seq=4086 receive_seq=4086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49999137 sd_pos=293337 heater_bed: target=60 temp=59.9 pwm=0.126 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=0.84 cputime=437.512 memavail=694836 print_time=4330.599 buffer_time=2.155 print_stall=0 extruder: target=220 temp=219.7 pwm=0.702
Stats 4328.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2244181 bytes_read=1672479 bytes_retransmit=0 bytes_invalid=0 send_seq=67583 receive_seq=67583 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=3526 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24676 bytes_read=77888 bytes_retransmit=0 bytes_invalid=0 send_seq=4087 receive_seq=4087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999509 adj=49999077 sd_pos=293772 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=0.84 cputime=437.728 memavail=694836 print_time=4331.673 buffer_time=2.229 print_stall=0 extruder: target=220 temp=219.9 pwm=0.636
Stats 4329.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2249938 bytes_read=1673391 bytes_retransmit=0 bytes_invalid=0 send_seq=67680 receive_seq=67680 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=57 stalled_bytes=4907 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24682 bytes_read=77917 bytes_retransmit=0 bytes_invalid=0 send_seq=4088 receive_seq=4088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999186 sd_pos=294172 heater_bed: target=60 temp=59.9 pwm=0.109 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=0.94 cputime=437.911 memavail=694836 print_time=4332.708 buffer_time=2.263 print_stall=0 extruder: target=220 temp=219.8 pwm=0.636
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4330.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2256422 bytes_read=1674416 bytes_retransmit=0 bytes_invalid=0 send_seq=67794 receive_seq=67794 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=3514 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24688 bytes_read=77933 bytes_retransmit=0 bytes_invalid=0 send_seq=4089 receive_seq=4089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999503 adj=49999132 sd_pos=294866 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=0.94 cputime=438.267 memavail=694836 print_time=4333.311 buffer_time=1.813 print_stall=0 extruder: target=220 temp=220.1 pwm=0.636
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4331.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2263367 bytes_read=1675439 bytes_retransmit=0 bytes_invalid=0 send_seq=67913 receive_seq=67913 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=5933 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24694 bytes_read=77949 bytes_retransmit=0 bytes_invalid=0 send_seq=4090 receive_seq=4090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999499 adj=49999109 sd_pos=296809 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=0.94 cputime=438.542 memavail=694844 print_time=4334.700 buffer_time=2.201 print_stall=0 extruder: target=220 temp=220.2 pwm=0.636
Stats 4332.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2271260 bytes_read=1676554 bytes_retransmit=0 bytes_invalid=0 send_seq=68047 receive_seq=68047 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=4151 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24700 bytes_read=77965 bytes_retransmit=0 bytes_invalid=0 send_seq=4091 receive_seq=4091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999497 adj=49999116 sd_pos=299644 heater_bed: target=60 temp=60.0 pwm=0.080 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.5 sysload=0.94 cputime=438.769 memavail=694844 print_time=4335.558 buffer_time=2.059 print_stall=0 extruder: target=220 temp=220.3 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4333.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2278081 bytes_read=1677549 bytes_retransmit=0 bytes_invalid=0 send_seq=68163 receive_seq=68163 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=6511 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24706 bytes_read=77981 bytes_retransmit=0 bytes_invalid=0 send_seq=4092 receive_seq=4092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999495 adj=49999072 sd_pos=302420 heater_bed: target=60 temp=60.0 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=0.94 cputime=439.151 memavail=694792 print_time=4336.853 buffer_time=2.354 print_stall=0 extruder: target=220 temp=220.3 pwm=0.584
Stats 4334.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2285022 bytes_read=1678574 bytes_retransmit=0 bytes_invalid=0 send_seq=68282 receive_seq=68282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=6499 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24712 bytes_read=78010 bytes_retransmit=0 bytes_invalid=0 send_seq=4093 receive_seq=4093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999492 adj=49999062 sd_pos=305207 heater_bed: target=60 temp=59.9 pwm=0.200 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.02 cputime=439.369 memavail=694848 print_time=4337.868 buffer_time=2.367 print_stall=0 extruder: target=220 temp=220.4 pwm=0.584
Stats 4335.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2292131 bytes_read=1679629 bytes_retransmit=0 bytes_invalid=0 send_seq=68404 receive_seq=68404 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=6456 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24718 bytes_read=78026 bytes_retransmit=0 bytes_invalid=0 send_seq=4094 receive_seq=4094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999488 adj=49999048 sd_pos=308157 heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.5 sysload=1.02 cputime=439.605 memavail=694848 print_time=4338.897 buffer_time=2.396 print_stall=0 extruder: target=220 temp=220.2 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4336.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2299370 bytes_read=1680670 bytes_retransmit=0 bytes_invalid=0 send_seq=68526 receive_seq=68526 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=4540 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24724 bytes_read=78042 bytes_retransmit=0 bytes_invalid=0 send_seq=4095 receive_seq=4095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999484 adj=49999033 sd_pos=309524 heater_bed: target=60 temp=59.8 pwm=0.179 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.02 cputime=439.897 memavail=695112 print_time=4339.514 buffer_time=2.013 print_stall=0 extruder: target=220 temp=220.2 pwm=0.637
Stats 4337.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2305915 bytes_read=1681637 bytes_retransmit=0 bytes_invalid=0 send_seq=68637 receive_seq=68637 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=5026 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24730 bytes_read=78058 bytes_retransmit=0 bytes_invalid=0 send_seq=4096 receive_seq=4096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999484 adj=49999043 sd_pos=312329 heater_bed: target=60 temp=59.9 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.5 sysload=1.02 cputime=440.126 memavail=695112 print_time=4340.534 buffer_time=2.031 print_stall=0 extruder: target=220 temp=220.1 pwm=0.637
Stats 4338.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2313877 bytes_read=1682757 bytes_retransmit=0 bytes_invalid=0 send_seq=68772 receive_seq=68772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=4397 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=24736 bytes_read=78074 bytes_retransmit=0 bytes_invalid=0 send_seq=4097 receive_seq=4097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999483 adj=49999061 sd_pos=315280 heater_bed: target=60 temp=59.8 pwm=0.191 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.02 cputime=440.357 memavail=695112 print_time=4341.589 buffer_time=2.086 print_stall=0 extruder: target=220 temp=220.2 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4339.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2320722 bytes_read=1683752 bytes_retransmit=0 bytes_invalid=0 send_seq=68888 receive_seq=68888 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=5499 freq=180001286 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24742 bytes_read=78103 bytes_retransmit=0 bytes_invalid=0 send_seq=4098 receive_seq=4098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999482 adj=49999090 sd_pos=317935 heater_bed: target=60 temp=59.9 pwm=0.058 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.02 cputime=440.678 memavail=694608 print_time=4342.747 buffer_time=2.244 print_stall=0 extruder: target=220 temp=220.3 pwm=0.582
Stats 4340.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2327596 bytes_read=1684754 bytes_retransmit=0 bytes_invalid=0 send_seq=69006 receive_seq=69006 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=3931 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24748 bytes_read=78119 bytes_retransmit=0 bytes_invalid=0 send_seq=4099 receive_seq=4099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999481 adj=49999115 sd_pos=320385 heater_bed: target=60 temp=59.9 pwm=0.185 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.5 sysload=1.02 cputime=440.939 memavail=694608 print_time=4343.635 buffer_time=2.131 print_stall=0 extruder: target=220 temp=220.4 pwm=0.582
Stats 4341.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2334924 bytes_read=1685838 bytes_retransmit=0 bytes_invalid=0 send_seq=69132 receive_seq=69132 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=2970 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24754 bytes_read=78135 bytes_retransmit=0 bytes_invalid=0 send_seq=4100 receive_seq=4100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999478 adj=49999047 sd_pos=323050 heater_bed: target=60 temp=59.9 pwm=0.114 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.02 cputime=441.140 memavail=694608 print_time=4344.647 buffer_time=2.142 print_stall=0 extruder: target=220 temp=220.6 pwm=0.530
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4342.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2340934 bytes_read=1686739 bytes_retransmit=0 bytes_invalid=0 send_seq=69233 receive_seq=69232 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=6324 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24760 bytes_read=78151 bytes_retransmit=0 bytes_invalid=0 send_seq=4101 receive_seq=4101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999478 adj=49999035 sd_pos=325001 heater_bed: target=60 temp=59.9 pwm=0.157 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.02 cputime=441.645 memavail=694620 print_time=4346.232 buffer_time=2.690 print_stall=0 extruder: target=220 temp=220.5 pwm=0.530
Stats 4343.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2346940 bytes_read=1687690 bytes_retransmit=0 bytes_invalid=0 send_seq=69337 receive_seq=69337 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=3384 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=24766 bytes_read=78167 bytes_retransmit=0 bytes_invalid=0 send_seq=4102 receive_seq=4102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999476 adj=49999083 sd_pos=325252 heater_bed: target=60 temp=59.8 pwm=0.157 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.02 cputime=441.803 memavail=694620 print_time=4346.718 buffer_time=2.175 print_stall=0 extruder: target=220 temp=220.5 pwm=0.530
Stats 4344.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2353937 bytes_read=1688724 bytes_retransmit=0 bytes_invalid=0 send_seq=69455 receive_seq=69455 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2214 freq=180001294 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=24772 bytes_read=78196 bytes_retransmit=0 bytes_invalid=0 send_seq=4103 receive_seq=4103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999477 adj=49999067 sd_pos=325665 heater_bed: target=60 temp=59.9 pwm=0.157 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.10 cputime=442.027 memavail=694620 print_time=4347.735 buffer_time=2.191 print_stall=0 extruder: target=220 temp=220.3 pwm=0.594
Stats 4345.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=2359368 bytes_read=1689595 bytes_retransmit=0 bytes_invalid=0 send_seq=69549 receive_seq=69549 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=2279 freq=180001287 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=24778 bytes_read=78212 bytes_retransmit=0 bytes_invalid=0 send_seq=4104 receive_seq=4104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999476 adj=49999079 sd_pos=325994 heater_bed: target=60 temp=59.9 pwm=0.157 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=29.6 sysload=1.10 cputime=442.197 memavail=694608 print_time=4348.766 buffer_time=2.221 print_stall=0 extruder: target=220 temp=220.2 pwm=0.594
Stats 4346.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2364924 bytes_read=1690518 bytes_retransmit=0 bytes_invalid=0 send_seq=69645 receive_seq=69645 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=2568 freq=180001280 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=24784 bytes_read=78227 bytes_retransmit=0 bytes_invalid=0 send_seq=4105 receive_seq=4105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999477 adj=49999099 sd_pos=326322 heater_bed: target=60 temp=59.9 pwm=0.049 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.10 cputime=442.419 memavail=695036 print_time=4349.913 buffer_time=2.367 print_stall=0 extruder: target=220 temp=219.9 pwm=0.664
Stats 4347.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2370245 bytes_read=1691433 bytes_retransmit=0 bytes_invalid=0 send_seq=69737 receive_seq=69737 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=1251 freq=180001280 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=24790 bytes_read=78242 bytes_retransmit=0 bytes_invalid=0 send_seq=4106 receive_seq=4106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999477 adj=49999136 sd_pos=326541 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.10 cputime=442.576 memavail=695128 print_time=4350.720 buffer_time=2.173 print_stall=0 extruder: target=220 temp=219.9 pwm=0.659
Stats 4348.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2375454 bytes_read=1692284 bytes_retransmit=0 bytes_invalid=0 send_seq=69827 receive_seq=69827 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001272 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=24796 bytes_read=78257 bytes_retransmit=0 bytes_invalid=0 send_seq=4107 receive_seq=4107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999478 adj=49999137 sd_pos=326790 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.10 cputime=442.731 memavail=695136 print_time=4351.568 buffer_time=2.020 print_stall=0 extruder: target=220 temp=219.9 pwm=0.600
Stats 4349.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2380547 bytes_read=1693176 bytes_retransmit=0 bytes_invalid=0 send_seq=69920 receive_seq=69920 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=605 freq=180001276 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24802 bytes_read=78285 bytes_retransmit=0 bytes_invalid=0 send_seq=4108 receive_seq=4108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999482 adj=49999181 sd_pos=327289 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.09 cputime=442.922 memavail=695136 print_time=4352.925 buffer_time=2.377 print_stall=0 extruder: target=220 temp=219.9 pwm=0.600
Stats 4350.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2384947 bytes_read=1694041 bytes_retransmit=0 bytes_invalid=0 send_seq=70002 receive_seq=70002 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=162 freq=180001273 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24808 bytes_read=78300 bytes_retransmit=0 bytes_invalid=0 send_seq=4109 receive_seq=4109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999483 adj=49999192 sd_pos=327538 heater_bed: target=60 temp=60.0 pwm=0.106 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=1.09 cputime=443.122 memavail=695136 print_time=4353.846 buffer_time=2.297 print_stall=0 extruder: target=220 temp=220.0 pwm=0.600
Stats 4351.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2388973 bytes_read=1694859 bytes_retransmit=0 bytes_invalid=0 send_seq=70080 receive_seq=70080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001274 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24814 bytes_read=78315 bytes_retransmit=0 bytes_invalid=0 send_seq=4110 receive_seq=4110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999483 adj=49999195 sd_pos=327761 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.09 cputime=443.283 memavail=695140 print_time=4354.781 buffer_time=2.230 print_stall=0 extruder: target=220 temp=220.0 pwm=0.549
Stats 4352.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2392775 bytes_read=1695677 bytes_retransmit=0 bytes_invalid=0 send_seq=70156 receive_seq=70156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001286 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24826 bytes_read=78347 bytes_retransmit=0 bytes_invalid=0 send_seq=4112 receive_seq=4112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999491 adj=49999185 sd_pos=327984 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.09 cputime=443.451 memavail=695140 print_time=4355.732 buffer_time=2.181 print_stall=0 extruder: target=220 temp=220.0 pwm=0.549
Stats 4353.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2396481 bytes_read=1696497 bytes_retransmit=0 bytes_invalid=0 send_seq=70229 receive_seq=70229 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001281 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24832 bytes_read=78363 bytes_retransmit=0 bytes_invalid=0 send_seq=4113 receive_seq=4113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999494 adj=49999236 sd_pos=328209 heater_bed: target=60 temp=60.0 pwm=0.063 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.09 cputime=443.633 memavail=695140 print_time=4356.711 buffer_time=2.159 print_stall=0 extruder: target=220 temp=219.9 pwm=0.626
Stats 4354.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2400133 bytes_read=1697253 bytes_retransmit=0 bytes_invalid=0 send_seq=70300 receive_seq=70300 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=24838 bytes_read=78379 bytes_retransmit=0 bytes_invalid=0 send_seq=4114 receive_seq=4114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999495 adj=49999269 sd_pos=328432 heater_bed: target=60 temp=59.9 pwm=0.168 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.24 cputime=443.814 memavail=695148 print_time=4357.715 buffer_time=2.162 print_stall=0 extruder: target=220 temp=219.7 pwm=0.626
Stats 4355.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2403873 bytes_read=1698050 bytes_retransmit=0 bytes_invalid=0 send_seq=70374 receive_seq=70374 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24844 bytes_read=78408 bytes_retransmit=0 bytes_invalid=0 send_seq=4115 receive_seq=4115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999497 adj=49999255 sd_pos=328652 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.5 sysload=1.24 cputime=443.991 memavail=695148 print_time=4358.739 buffer_time=2.186 print_stall=0 extruder: target=220 temp=219.5 pwm=0.705
Stats 4356.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2407566 bytes_read=1698886 bytes_retransmit=0 bytes_invalid=0 send_seq=70447 receive_seq=70447 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001284 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24850 bytes_read=78424 bytes_retransmit=0 bytes_invalid=0 send_seq=4116 receive_seq=4116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999503 adj=49999270 sd_pos=328877 heater_bed: target=60 temp=59.9 pwm=0.183 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.5 sysload=1.24 cputime=444.170 memavail=695348 print_time=4359.783 buffer_time=2.228 print_stall=0 extruder: target=220 temp=219.4 pwm=0.705
Stats 4357.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2411413 bytes_read=1699683 bytes_retransmit=0 bytes_invalid=0 send_seq=70524 receive_seq=70524 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24856 bytes_read=78440 bytes_retransmit=0 bytes_invalid=0 send_seq=4117 receive_seq=4117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999302 sd_pos=329100 heater_bed: target=60 temp=59.9 pwm=0.104 raspberry_pi: temp=40.8 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.24 cputime=444.349 memavail=695404 print_time=4360.843 buffer_time=2.287 print_stall=0 extruder: target=220 temp=219.4 pwm=0.705
Stats 4358.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2415051 bytes_read=1700475 bytes_retransmit=0 bytes_invalid=0 send_seq=70597 receive_seq=70597 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24862 bytes_read=78456 bytes_retransmit=0 bytes_invalid=0 send_seq=4118 receive_seq=4118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49999306 sd_pos=329324 heater_bed: target=60 temp=59.9 pwm=0.121 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.24 cputime=444.513 memavail=695404 print_time=4361.923 buffer_time=2.367 print_stall=0 extruder: target=220 temp=219.4 pwm=0.705
Stats 4359.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2418914 bytes_read=1701315 bytes_retransmit=0 bytes_invalid=0 send_seq=70674 receive_seq=70674 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24868 bytes_read=78472 bytes_retransmit=0 bytes_invalid=0 send_seq=4119 receive_seq=4119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999502 adj=49999259 sd_pos=329548 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.30 cputime=444.660 memavail=695404 print_time=4363.029 buffer_time=2.472 print_stall=0 extruder: target=220 temp=219.7 pwm=0.635
Stats 4360.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2421015 bytes_read=1701957 bytes_retransmit=0 bytes_invalid=0 send_seq=70720 receive_seq=70720 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24874 bytes_read=78501 bytes_retransmit=0 bytes_invalid=0 send_seq=4120 receive_seq=4120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999174 sd_pos=329659 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.30 cputime=444.794 memavail=695416 print_time=4363.594 buffer_time=2.037 print_stall=0 extruder: target=220 temp=219.8 pwm=0.635
Stats 4361.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2424855 bytes_read=1702773 bytes_retransmit=0 bytes_invalid=0 send_seq=70794 receive_seq=70794 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24880 bytes_read=78517 bytes_retransmit=0 bytes_invalid=0 send_seq=4121 receive_seq=4121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999070 sd_pos=329884 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.30 cputime=444.967 memavail=695408 print_time=4364.748 buffer_time=2.190 print_stall=0 extruder: target=220 temp=220.1 pwm=0.578
Stats 4362.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2428695 bytes_read=1703589 bytes_retransmit=0 bytes_invalid=0 send_seq=70869 receive_seq=70869 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24886 bytes_read=78533 bytes_retransmit=0 bytes_invalid=0 send_seq=4122 receive_seq=4122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999108 sd_pos=330110 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.30 cputime=445.164 memavail=695408 print_time=4365.930 buffer_time=2.371 print_stall=0 extruder: target=220 temp=220.1 pwm=0.578
Stats 4363.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2432600 bytes_read=1704385 bytes_retransmit=0 bytes_invalid=0 send_seq=70946 receive_seq=70946 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24892 bytes_read=78549 bytes_retransmit=0 bytes_invalid=0 send_seq=4123 receive_seq=4123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999526 adj=49999120 sd_pos=330334 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=40.2 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.30 cputime=445.312 memavail=695408 print_time=4367.129 buffer_time=2.563 print_stall=0 extruder: target=220 temp=220.0 pwm=0.629
Stats 4364.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2434700 bytes_read=1705065 bytes_retransmit=0 bytes_invalid=0 send_seq=70994 receive_seq=70994 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=24898 bytes_read=78565 bytes_retransmit=0 bytes_invalid=0 send_seq=4124 receive_seq=4124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999526 adj=49999333 sd_pos=330445 heater_bed: target=60 temp=60.1 pwm=0.086 raspberry_pi: temp=41.3 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.28 cputime=445.482 memavail=695408 print_time=4367.732 buffer_time=2.165 print_stall=0 extruder: target=220 temp=219.9 pwm=0.683
Stats 4365.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=2438641 bytes_read=1705880 bytes_retransmit=0 bytes_invalid=0 send_seq=71071 receive_seq=71071 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24904 bytes_read=78594 bytes_retransmit=0 bytes_invalid=0 send_seq=4125 receive_seq=4125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999350 sd_pos=330670 heater_bed: target=60 temp=60.2 pwm=0.015 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.7 sysload=1.28 cputime=445.634 memavail=695408 print_time=4368.946 buffer_time=2.378 print_stall=0 extruder: target=220 temp=219.7 pwm=0.683
Stats 4366.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2442599 bytes_read=1706685 bytes_retransmit=0 bytes_invalid=0 send_seq=71150 receive_seq=71149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24910 bytes_read=78610 bytes_retransmit=0 bytes_invalid=0 send_seq=4126 receive_seq=4126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999518 adj=49999270 sd_pos=330924 heater_bed: target=60 temp=60.1 pwm=0.083 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.28 cputime=445.806 memavail=695388 print_time=4370.163 buffer_time=2.586 print_stall=0 extruder: target=220 temp=219.6 pwm=0.736
Stats 4367.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2444762 bytes_read=1707385 bytes_retransmit=0 bytes_invalid=0 send_seq=71198 receive_seq=71198 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24916 bytes_read=78626 bytes_retransmit=0 bytes_invalid=0 send_seq=4127 receive_seq=4127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999517 adj=49999225 sd_pos=331038 heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.28 cputime=445.957 memavail=695420 print_time=4370.771 buffer_time=2.193 print_stall=0 extruder: target=220 temp=219.6 pwm=0.736
Stats 4368.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2448658 bytes_read=1708190 bytes_retransmit=0 bytes_invalid=0 send_seq=71274 receive_seq=71274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24922 bytes_read=78642 bytes_retransmit=0 bytes_invalid=0 send_seq=4128 receive_seq=4128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999142 sd_pos=331263 heater_bed: target=60 temp=60.1 pwm=0.173 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.28 cputime=446.142 memavail=695420 print_time=4371.984 buffer_time=2.406 print_stall=0 extruder: target=220 temp=219.8 pwm=0.663
Stats 4369.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2450858 bytes_read=1708841 bytes_retransmit=0 bytes_invalid=0 send_seq=71322 receive_seq=71322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=24928 bytes_read=78658 bytes_retransmit=0 bytes_invalid=0 send_seq=4129 receive_seq=4129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999213 sd_pos=331432 heater_bed: target=60 temp=60.1 pwm=0.105 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.34 cputime=446.295 memavail=694748 print_time=4372.615 buffer_time=2.036 print_stall=0 extruder: target=220 temp=220.0 pwm=0.613
Stats 4370.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2454900 bytes_read=1709681 bytes_retransmit=0 bytes_invalid=0 send_seq=71399 receive_seq=71399 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24934 bytes_read=78687 bytes_retransmit=0 bytes_invalid=0 send_seq=4130 receive_seq=4130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999261 sd_pos=331743 heater_bed: target=60 temp=60.1 pwm=0.105 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.34 cputime=446.498 memavail=694920 print_time=4373.853 buffer_time=2.273 print_stall=0 extruder: target=220 temp=220.1 pwm=0.613
Stats 4371.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2458053 bytes_read=1710437 bytes_retransmit=0 bytes_invalid=0 send_seq=71462 receive_seq=71462 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001324 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24940 bytes_read=78703 bytes_retransmit=0 bytes_invalid=0 send_seq=4131 receive_seq=4131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999224 sd_pos=331912 heater_bed: target=60 temp=60.1 pwm=0.113 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.34 cputime=446.681 memavail=694920 print_time=4374.787 buffer_time=2.207 print_stall=0 extruder: target=220 temp=220.3 pwm=0.551
Stats 4372.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2461170 bytes_read=1711158 bytes_retransmit=0 bytes_invalid=0 send_seq=71524 receive_seq=71524 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24946 bytes_read=78719 bytes_retransmit=0 bytes_invalid=0 send_seq=4132 receive_seq=4132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999519 adj=49999179 sd_pos=332111 heater_bed: target=60 temp=60.2 pwm=0.113 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.34 cputime=446.854 memavail=694928 print_time=4375.721 buffer_time=2.140 print_stall=0 extruder: target=220 temp=220.2 pwm=0.618
Stats 4373.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2464188 bytes_read=1711903 bytes_retransmit=0 bytes_invalid=0 send_seq=71584 receive_seq=71584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24952 bytes_read=78735 bytes_retransmit=0 bytes_invalid=0 send_seq=4133 receive_seq=4133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999525 adj=49999174 sd_pos=332282 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.6 sysload=1.34 cputime=447.028 memavail=694928 print_time=4376.658 buffer_time=2.076 print_stall=0 extruder: target=220 temp=220.2 pwm=0.618
Stats 4374.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2467290 bytes_read=1712638 bytes_retransmit=0 bytes_invalid=0 send_seq=71646 receive_seq=71646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=24958 bytes_read=78751 bytes_retransmit=0 bytes_invalid=0 send_seq=4134 receive_seq=4134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999253 sd_pos=332456 heater_bed: target=60 temp=60.1 pwm=0.125 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.31 cputime=447.200 memavail=694928 print_time=4377.605 buffer_time=2.023 print_stall=0 extruder: target=220 temp=219.8 pwm=0.726
Stats 4375.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2471262 bytes_read=1713439 bytes_retransmit=0 bytes_invalid=0 send_seq=71724 receive_seq=71724 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24964 bytes_read=78780 bytes_retransmit=0 bytes_invalid=0 send_seq=4135 receive_seq=4135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999220 sd_pos=332685 heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=1.31 cputime=447.365 memavail=695184 print_time=4378.873 buffer_time=2.290 print_stall=0 extruder: target=220 temp=219.6 pwm=0.726
Stats 4376.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2474272 bytes_read=1714205 bytes_retransmit=0 bytes_invalid=0 send_seq=71783 receive_seq=71783 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001463 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24970 bytes_read=78796 bytes_retransmit=0 bytes_invalid=0 send_seq=4136 receive_seq=4136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999010 sd_pos=332853 heater_bed: target=60 temp=60.0 pwm=0.183 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.31 cputime=447.534 memavail=695384 print_time=4379.820 buffer_time=2.236 print_stall=0 extruder: target=220 temp=219.6 pwm=0.726
Stats 4377.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2477404 bytes_read=1714940 bytes_retransmit=0 bytes_invalid=0 send_seq=71845 receive_seq=71845 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001446 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24976 bytes_read=78812 bytes_retransmit=0 bytes_invalid=0 send_seq=4137 receive_seq=4137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49998738 sd_pos=333026 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=1.31 cputime=447.663 memavail=695436 print_time=4380.766 buffer_time=2.180 print_stall=0 extruder: target=220 temp=219.6 pwm=0.726
Stats 4378.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2480402 bytes_read=1715661 bytes_retransmit=0 bytes_invalid=0 send_seq=71907 receive_seq=71907 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001433 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24982 bytes_read=78828 bytes_retransmit=0 bytes_invalid=0 send_seq=4138 receive_seq=4138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49998801 sd_pos=333193 heater_bed: target=60 temp=60.1 pwm=0.026 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=1.31 cputime=447.835 memavail=695192 print_time=4381.705 buffer_time=2.118 print_stall=0 extruder: target=220 temp=219.9 pwm=0.647
Stats 4379.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2483451 bytes_read=1716426 bytes_retransmit=0 bytes_invalid=0 send_seq=71969 receive_seq=71969 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001421 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=24988 bytes_read=78844 bytes_retransmit=0 bytes_invalid=0 send_seq=4139 receive_seq=4139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49998937 sd_pos=333364 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=29.7 sysload=1.37 cputime=448.013 memavail=695192 print_time=4382.643 buffer_time=2.055 print_stall=0 extruder: target=220 temp=220.1 pwm=0.647
Stats 4380.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2487271 bytes_read=1717156 bytes_retransmit=0 bytes_invalid=0 send_seq=72042 receive_seq=72030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=194 stalled_bytes=0 freq=180001407 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=24994 bytes_read=78873 bytes_retransmit=0 bytes_invalid=0 send_seq=4140 receive_seq=4140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999019 sd_pos=333584 heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=40.8 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.37 cputime=448.209 memavail=695192 print_time=4383.889 buffer_time=2.293 print_stall=0 extruder: target=220 temp=220.3 pwm=0.595
Stats 4381.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2490528 bytes_read=1717963 bytes_retransmit=0 bytes_invalid=0 send_seq=72106 receive_seq=72106 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001406 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=25000 bytes_read=78889 bytes_retransmit=0 bytes_invalid=0 send_seq=4141 receive_seq=4141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999084 sd_pos=333749 heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.37 cputime=448.386 memavail=695448 print_time=4384.817 buffer_time=2.222 print_stall=0 extruder: target=220 temp=220.3 pwm=0.595
Stats 4382.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2493605 bytes_read=1718728 bytes_retransmit=0 bytes_invalid=0 send_seq=72168 receive_seq=72168 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001395 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=25006 bytes_read=78905 bytes_retransmit=0 bytes_invalid=0 send_seq=4142 receive_seq=4142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999078 sd_pos=333918 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.37 cputime=448.555 memavail=695448 print_time=4385.746 buffer_time=2.150 print_stall=0 extruder: target=220 temp=220.2 pwm=0.595
Stats 4383.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2496670 bytes_read=1719468 bytes_retransmit=0 bytes_invalid=0 send_seq=72231 receive_seq=72231 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001457 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=25012 bytes_read=78921 bytes_retransmit=0 bytes_invalid=0 send_seq=4143 receive_seq=4143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999122 sd_pos=334081 heater_bed: target=60 temp=59.9 pwm=0.150 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.37 cputime=448.724 memavail=695448 print_time=4386.666 buffer_time=2.069 print_stall=0 extruder: target=220 temp=220.1 pwm=0.656
Stats 4384.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2500641 bytes_read=1720264 bytes_retransmit=0 bytes_invalid=0 send_seq=72308 receive_seq=72308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001478 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=25018 bytes_read=78937 bytes_retransmit=0 bytes_invalid=0 send_seq=4144 receive_seq=4144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999517 adj=49998895 sd_pos=334303 heater_bed: target=60 temp=59.9 pwm=0.150 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=1.42 cputime=448.875 memavail=695460 print_time=4387.888 buffer_time=2.290 print_stall=0 extruder: target=220 temp=219.9 pwm=0.715
Stats 4385.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2504532 bytes_read=1721089 bytes_retransmit=0 bytes_invalid=0 send_seq=72384 receive_seq=72384 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001524 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=25024 bytes_read=78966 bytes_retransmit=0 bytes_invalid=0 send_seq=4145 receive_seq=4145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999516 adj=49998855 sd_pos=334523 heater_bed: target=60 temp=59.8 pwm=0.224 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.42 cputime=449.061 memavail=695460 print_time=4389.102 buffer_time=2.503 print_stall=0 extruder: target=220 temp=219.8 pwm=0.715
Stats 4386.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2506597 bytes_read=1721760 bytes_retransmit=0 bytes_invalid=0 send_seq=72430 receive_seq=72430 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001511 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=25030 bytes_read=78982 bytes_retransmit=0 bytes_invalid=0 send_seq=4146 receive_seq=4146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999517 adj=49998772 sd_pos=334634 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=40.8 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=1.42 cputime=449.210 memavail=695356 print_time=4389.706 buffer_time=2.106 print_stall=0 extruder: target=220 temp=219.7 pwm=0.715
Stats 4387.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2510407 bytes_read=1722541 bytes_retransmit=0 bytes_invalid=0 send_seq=72504 receive_seq=72504 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001493 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=25036 bytes_read=78998 bytes_retransmit=0 bytes_invalid=0 send_seq=4147 receive_seq=4147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49998827 sd_pos=334870 heater_bed: target=60 temp=59.8 pwm=0.174 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.42 cputime=449.389 memavail=695208 print_time=4390.906 buffer_time=2.303 print_stall=0 extruder: target=220 temp=219.8 pwm=0.715
Stats 4388.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2514151 bytes_read=1723366 bytes_retransmit=0 bytes_invalid=0 send_seq=72578 receive_seq=72578 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=25042 bytes_read=79014 bytes_retransmit=0 bytes_invalid=0 send_seq=4148 receive_seq=4148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999519 adj=49999004 sd_pos=335122 heater_bed: target=60 temp=59.8 pwm=0.229 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.42 cputime=449.589 memavail=695208 print_time=4392.104 buffer_time=2.500 print_stall=0 extruder: target=220 temp=219.9 pwm=0.660
Stats 4389.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2516191 bytes_read=1724014 bytes_retransmit=0 bytes_invalid=0 send_seq=72625 receive_seq=72625 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001507 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=25048 bytes_read=79030 bytes_retransmit=0 bytes_invalid=0 send_seq=4149 receive_seq=4149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999517 adj=49999035 sd_pos=335234 heater_bed: target=60 temp=59.8 pwm=0.177 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.38 cputime=449.697 memavail=695208 print_time=4392.704 buffer_time=2.095 print_stall=0 extruder: target=220 temp=220.1 pwm=0.594
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4390.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2519863 bytes_read=1724776 bytes_retransmit=0 bytes_invalid=0 send_seq=72697 receive_seq=72697 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001530 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25054 bytes_read=79059 bytes_retransmit=0 bytes_invalid=0 send_seq=4150 receive_seq=4150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999514 adj=49998926 sd_pos=335488 heater_bed: target=60 temp=59.8 pwm=0.177 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=1.38 cputime=449.956 memavail=695220 print_time=4393.879 buffer_time=2.270 print_stall=0 extruder: target=220 temp=220.3 pwm=0.594
Stats 4391.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2523445 bytes_read=1725607 bytes_retransmit=0 bytes_invalid=0 send_seq=72769 receive_seq=72769 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001555 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25060 bytes_read=79075 bytes_retransmit=0 bytes_invalid=0 send_seq=4151 receive_seq=4151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49998861 sd_pos=335711 heater_bed: target=60 temp=59.9 pwm=0.094 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=1.38 cputime=450.110 memavail=695220 print_time=4395.021 buffer_time=2.411 print_stall=0 extruder: target=220 temp=220.3 pwm=0.594
Stats 4392.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2526740 bytes_read=1726362 bytes_retransmit=0 bytes_invalid=0 send_seq=72835 receive_seq=72835 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001537 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25066 bytes_read=79091 bytes_retransmit=0 bytes_invalid=0 send_seq=4152 receive_seq=4152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999515 adj=49998816 sd_pos=335932 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.38 cputime=450.291 memavail=695220 print_time=4396.141 buffer_time=2.523 print_stall=0 extruder: target=220 temp=220.2 pwm=0.594
Stats 4393.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2528685 bytes_read=1726993 bytes_retransmit=0 bytes_invalid=0 send_seq=72879 receive_seq=72879 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001514 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25072 bytes_read=79107 bytes_retransmit=0 bytes_invalid=0 send_seq=4153 receive_seq=4153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49998959 sd_pos=336042 heater_bed: target=60 temp=60.0 pwm=0.084 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.38 cputime=450.400 memavail=695188 print_time=4396.691 buffer_time=2.072 print_stall=0 extruder: target=220 temp=220.1 pwm=0.655
Stats 4394.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2532027 bytes_read=1727783 bytes_retransmit=0 bytes_invalid=0 send_seq=72946 receive_seq=72946 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25078 bytes_read=79123 bytes_retransmit=0 bytes_invalid=0 send_seq=4154 receive_seq=4154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49998998 sd_pos=336262 heater_bed: target=60 temp=60.0 pwm=0.084 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.43 cputime=450.578 memavail=695220 print_time=4397.776 buffer_time=2.157 print_stall=0 extruder: target=220 temp=219.9 pwm=0.655
Stats 4395.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=2535622 bytes_read=1728563 bytes_retransmit=0 bytes_invalid=0 send_seq=73017 receive_seq=73017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001475 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25084 bytes_read=79152 bytes_retransmit=0 bytes_invalid=0 send_seq=4155 receive_seq=4155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49999086 sd_pos=336510 heater_bed: target=60 temp=60.1 pwm=0.084 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=1.43 cputime=450.757 memavail=695220 print_time=4398.837 buffer_time=2.218 print_stall=0 extruder: target=220 temp=219.8 pwm=0.708
Stats 4396.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2539222 bytes_read=1729330 bytes_retransmit=0 bytes_invalid=0 send_seq=73087 receive_seq=73087 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25090 bytes_read=79168 bytes_retransmit=0 bytes_invalid=0 send_seq=4156 receive_seq=4156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999148 sd_pos=336731 heater_bed: target=60 temp=60.0 pwm=0.147 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.43 cputime=450.943 memavail=694704 print_time=4399.850 buffer_time=2.230 print_stall=0 extruder: target=220 temp=219.6 pwm=0.708
Stats 4397.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2542948 bytes_read=1730155 bytes_retransmit=0 bytes_invalid=0 send_seq=73161 receive_seq=73161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001456 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25096 bytes_read=79184 bytes_retransmit=0 bytes_invalid=0 send_seq=4157 receive_seq=4157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999174 sd_pos=336950 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.43 cputime=451.097 memavail=694728 print_time=4400.837 buffer_time=2.215 print_stall=0 extruder: target=220 temp=219.7 pwm=0.708
Stats 4398.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2546663 bytes_read=1730945 bytes_retransmit=0 bytes_invalid=0 send_seq=73234 receive_seq=73234 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001442 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25102 bytes_read=79200 bytes_retransmit=0 bytes_invalid=0 send_seq=4158 receive_seq=4158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999202 sd_pos=337173 heater_bed: target=60 temp=60.0 pwm=0.119 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.43 cputime=451.268 memavail=694728 print_time=4401.801 buffer_time=2.179 print_stall=0 extruder: target=220 temp=219.7 pwm=0.708
Stats 4399.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2550567 bytes_read=1731741 bytes_retransmit=0 bytes_invalid=0 send_seq=73311 receive_seq=73311 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001435 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25108 bytes_read=79216 bytes_retransmit=0 bytes_invalid=0 send_seq=4159 receive_seq=4159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49999228 sd_pos=337394 heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=40.8 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.32 cputime=451.441 memavail=694740 print_time=4402.733 buffer_time=2.110 print_stall=0 extruder: target=220 temp=219.9 pwm=0.634
Stats 4400.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=2554635 bytes_read=1732591 bytes_retransmit=0 bytes_invalid=0 send_seq=73390 receive_seq=73390 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001420 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=25114 bytes_read=79245 bytes_retransmit=0 bytes_invalid=0 send_seq=4160 receive_seq=4160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999512 adj=49999232 sd_pos=337615 heater_bed: target=60 temp=60.0 pwm=0.181 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.32 cputime=451.609 memavail=694740 print_time=4403.623 buffer_time=1.999 print_stall=0 extruder: target=220 temp=220.1 pwm=0.634
Stats 4401.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2559665 bytes_read=1733492 bytes_retransmit=0 bytes_invalid=0 send_seq=73482 receive_seq=73482 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=757 freq=180001397 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=25120 bytes_read=79261 bytes_retransmit=0 bytes_invalid=0 send_seq=4161 receive_seq=4161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999267 sd_pos=337951 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.32 cputime=451.786 memavail=694740 print_time=4404.892 buffer_time=2.268 print_stall=0 extruder: target=220 temp=220.3 pwm=0.572
Stats 4402.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2564107 bytes_read=1734273 bytes_retransmit=0 bytes_invalid=0 send_seq=73558 receive_seq=73558 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=289 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=25126 bytes_read=79277 bytes_retransmit=0 bytes_invalid=0 send_seq=4162 receive_seq=4162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999115 sd_pos=338174 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.32 cputime=451.978 memavail=694628 print_time=4405.693 buffer_time=2.068 print_stall=0 extruder: target=220 temp=220.4 pwm=0.572
Stats 4403.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2568577 bytes_read=1735133 bytes_retransmit=0 bytes_invalid=0 send_seq=73639 receive_seq=73639 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=1800 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=25132 bytes_read=79293 bytes_retransmit=0 bytes_invalid=0 send_seq=4163 receive_seq=4163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999158 sd_pos=338542 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.32 cputime=452.145 memavail=694740 print_time=4406.838 buffer_time=2.212 print_stall=0 extruder: target=220 temp=220.3 pwm=0.572
Stats 4404.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2573430 bytes_read=1735978 bytes_retransmit=0 bytes_invalid=0 send_seq=73723 receive_seq=73723 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=3053 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=25138 bytes_read=79309 bytes_retransmit=0 bytes_invalid=0 send_seq=4164 receive_seq=4164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999168 sd_pos=338849 heater_bed: target=60 temp=60.2 pwm=0.072 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.21 cputime=452.366 memavail=694740 print_time=4407.898 buffer_time=2.271 print_stall=0 extruder: target=220 temp=220.1 pwm=0.685
Stats 4405.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2578911 bytes_read=1736864 bytes_retransmit=0 bytes_invalid=0 send_seq=73818 receive_seq=73818 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4201 freq=180001381 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25144 bytes_read=79338 bytes_retransmit=0 bytes_invalid=0 send_seq=4165 receive_seq=4165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49999188 sd_pos=339384 heater_bed: target=60 temp=60.1 pwm=0.138 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.21 cputime=452.590 memavail=694752 print_time=4408.901 buffer_time=2.273 print_stall=0 extruder: target=220 temp=220.0 pwm=0.685
Stats 4406.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2584670 bytes_read=1737834 bytes_retransmit=0 bytes_invalid=0 send_seq=73917 receive_seq=73917 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=4825 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25150 bytes_read=79354 bytes_retransmit=0 bytes_invalid=0 send_seq=4166 receive_seq=4166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999503 adj=49999099 sd_pos=339722 heater_bed: target=60 temp=60.1 pwm=0.138 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.21 cputime=452.747 memavail=694952 print_time=4409.800 buffer_time=2.172 print_stall=0 extruder: target=220 temp=219.8 pwm=0.685
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4407.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2591160 bytes_read=1738800 bytes_retransmit=0 bytes_invalid=0 send_seq=74028 receive_seq=74028 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=8972 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25156 bytes_read=79370 bytes_retransmit=0 bytes_invalid=0 send_seq=4167 receive_seq=4167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999142 sd_pos=340967 heater_bed: target=60 temp=60.1 pwm=0.084 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.21 cputime=452.998 memavail=695004 print_time=4411.195 buffer_time=2.566 print_stall=0 extruder: target=220 temp=219.6 pwm=0.685
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4408.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2598153 bytes_read=1739816 bytes_retransmit=0 bytes_invalid=0 send_seq=74146 receive_seq=74146 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=6245 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25162 bytes_read=79386 bytes_retransmit=0 bytes_invalid=0 send_seq=4168 receive_seq=4168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999214 sd_pos=341770 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.21 cputime=453.262 memavail=694748 print_time=4411.804 buffer_time=2.174 print_stall=0 extruder: target=220 temp=219.8 pwm=0.685
Stats 4409.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2605917 bytes_read=1740925 bytes_retransmit=0 bytes_invalid=0 send_seq=74279 receive_seq=74279 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=5235 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25168 bytes_read=79402 bytes_retransmit=0 bytes_invalid=0 send_seq=4169 receive_seq=4169 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999510 adj=49999228 sd_pos=344491 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.11 cputime=453.494 memavail=694748 print_time=4412.789 buffer_time=2.158 print_stall=0 extruder: target=220 temp=219.9 pwm=0.660
Stats 4410.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=2613376 bytes_read=1741976 bytes_retransmit=0 bytes_invalid=0 send_seq=74407 receive_seq=74407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=5885 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25174 bytes_read=79431 bytes_retransmit=0 bytes_invalid=0 send_seq=4170 receive_seq=4170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999507 adj=49999246 sd_pos=347337 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.11 cputime=453.732 memavail=694748 print_time=4414.004 buffer_time=2.372 print_stall=0 extruder: target=220 temp=220.1 pwm=0.592
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4411.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2620209 bytes_read=1742978 bytes_retransmit=0 bytes_invalid=0 send_seq=74521 receive_seq=74521 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=5718 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25180 bytes_read=79447 bytes_retransmit=0 bytes_invalid=0 send_seq=4171 receive_seq=4171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999223 sd_pos=349930 heater_bed: target=60 temp=60.1 pwm=0.070 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.11 cputime=454.040 memavail=694712 print_time=4414.892 buffer_time=2.259 print_stall=0 extruder: target=220 temp=220.2 pwm=0.592
Stats 4412.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2626677 bytes_read=1743971 bytes_retransmit=0 bytes_invalid=0 send_seq=74631 receive_seq=74631 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=6713 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25186 bytes_read=79463 bytes_retransmit=0 bytes_invalid=0 send_seq=4172 receive_seq=4172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999510 adj=49999222 sd_pos=352776 heater_bed: target=60 temp=60.1 pwm=0.124 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.11 cputime=454.283 memavail=694760 print_time=4416.083 buffer_time=2.449 print_stall=0 extruder: target=220 temp=220.4 pwm=0.592
Stats 4413.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2634333 bytes_read=1745010 bytes_retransmit=0 bytes_invalid=0 send_seq=74759 receive_seq=74759 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=3594 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25192 bytes_read=79479 bytes_retransmit=0 bytes_invalid=0 send_seq=4173 receive_seq=4173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999509 adj=49999241 sd_pos=354247 heater_bed: target=60 temp=60.2 pwm=0.054 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.11 cputime=454.476 memavail=694760 print_time=4416.652 buffer_time=2.018 print_stall=0 extruder: target=220 temp=220.5 pwm=0.530
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4414.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2640950 bytes_read=1746012 bytes_retransmit=0 bytes_invalid=0 send_seq=74872 receive_seq=74872 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4303 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25204 bytes_read=79511 bytes_retransmit=0 bytes_invalid=0 send_seq=4175 receive_seq=4175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999238 sd_pos=356894 heater_bed: target=60 temp=60.1 pwm=0.166 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=29.5 sysload=1.03 cputime=454.830 memavail=694764 print_time=4417.642 buffer_time=2.007 print_stall=0 extruder: target=220 temp=220.5 pwm=0.530
Stats 4415.4: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2647682 bytes_read=1747031 bytes_retransmit=0 bytes_invalid=0 send_seq=74987 receive_seq=74987 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=4745 freq=180001309 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25210 bytes_read=79540 bytes_retransmit=0 bytes_invalid=0 send_seq=4176 receive_seq=4176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999261 sd_pos=359772 heater_bed: target=60 temp=60.1 pwm=0.166 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=29.6 sysload=1.03 cputime=455.070 memavail=694764 print_time=4418.781 buffer_time=2.145 print_stall=0 extruder: target=220 temp=220.5 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4416.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2655218 bytes_read=1748098 bytes_retransmit=0 bytes_invalid=0 send_seq=75115 receive_seq=75115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=5301 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25216 bytes_read=79556 bytes_retransmit=0 bytes_invalid=0 send_seq=4177 receive_seq=4177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999506 adj=49999250 sd_pos=362292 heater_bed: target=60 temp=60.1 pwm=0.183 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.03 cputime=455.458 memavail=694748 print_time=4419.839 buffer_time=2.201 print_stall=0 extruder: target=220 temp=220.3 pwm=0.595
Stats 4417.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2661780 bytes_read=1749074 bytes_retransmit=0 bytes_invalid=0 send_seq=75227 receive_seq=75227 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=3965 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25222 bytes_read=79572 bytes_retransmit=0 bytes_invalid=0 send_seq=4178 receive_seq=4178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999504 adj=49999225 sd_pos=364326 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.03 cputime=455.668 memavail=694776 print_time=4420.699 buffer_time=2.061 print_stall=0 extruder: target=220 temp=220.2 pwm=0.595
Stats 4418.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2669312 bytes_read=1750183 bytes_retransmit=0 bytes_invalid=0 send_seq=75358 receive_seq=75358 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=3480 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25228 bytes_read=79588 bytes_retransmit=0 bytes_invalid=0 send_seq=4179 receive_seq=4179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999505 adj=49999208 sd_pos=367352 heater_bed: target=60 temp=60.2 pwm=0.079 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.03 cputime=455.888 memavail=694776 print_time=4421.945 buffer_time=2.283 print_stall=0 extruder: target=220 temp=220.0 pwm=0.662
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4419.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2676229 bytes_read=1751213 bytes_retransmit=0 bytes_invalid=0 send_seq=75478 receive_seq=75478 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=3568 freq=180001299 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25234 bytes_read=79604 bytes_retransmit=0 bytes_invalid=0 send_seq=4180 receive_seq=4180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999508 adj=49999210 sd_pos=369491 heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=41.3 mcu_temp: temp=37.6 chamber: temp=29.9 sysload=0.94 cputime=456.266 memavail=694776 print_time=4422.989 buffer_time=2.224 print_stall=0 extruder: target=220 temp=220.1 pwm=0.593
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4420.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2681492 bytes_read=1752103 bytes_retransmit=0 bytes_invalid=0 send_seq=75571 receive_seq=75570 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4177 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25240 bytes_read=79633 bytes_retransmit=0 bytes_invalid=0 send_seq=4181 receive_seq=4181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999511 adj=49999223 sd_pos=370057 heater_bed: target=60 temp=60.2 pwm=0.060 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=29.8 sysload=0.94 cputime=456.544 memavail=694776 print_time=4424.002 buffer_time=2.236 print_stall=0 extruder: target=220 temp=220.1 pwm=0.593
Stats 4421.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2688022 bytes_read=1753095 bytes_retransmit=0 bytes_invalid=0 send_seq=75683 receive_seq=75683 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=5107 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25246 bytes_read=79649 bytes_retransmit=0 bytes_invalid=0 send_seq=4182 receive_seq=4182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999165 sd_pos=371387 heater_bed: target=60 temp=60.1 pwm=0.110 raspberry_pi: temp=40.8 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.94 cputime=456.801 memavail=694776 print_time=4425.378 buffer_time=2.612 print_stall=0 extruder: target=220 temp=220.2 pwm=0.593
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4422.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2694860 bytes_read=1754105 bytes_retransmit=0 bytes_invalid=0 send_seq=75799 receive_seq=75799 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=9783 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25252 bytes_read=79665 bytes_retransmit=0 bytes_invalid=0 send_seq=4183 receive_seq=4183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999513 adj=49999186 sd_pos=373471 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.94 cputime=457.142 memavail=694776 print_time=4426.730 buffer_time=2.963 print_stall=0 extruder: target=220 temp=220.2 pwm=0.542
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4423.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2700618 bytes_read=1755133 bytes_retransmit=0 bytes_invalid=0 send_seq=75903 receive_seq=75903 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=12342 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25258 bytes_read=79681 bytes_retransmit=0 bytes_invalid=0 send_seq=4184 receive_seq=4184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999514 adj=49999187 sd_pos=374762 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=0.94 cputime=457.622 memavail=694672 print_time=4427.634 buffer_time=2.602 print_stall=0 extruder: target=220 temp=220.4 pwm=0.542
Stats 4424.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2709347 bytes_read=1756264 bytes_retransmit=0 bytes_invalid=0 send_seq=76050 receive_seq=76049 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=6592 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25264 bytes_read=79697 bytes_retransmit=0 bytes_invalid=0 send_seq=4185 receive_seq=4185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999518 adj=49999215 sd_pos=375015 heater_bed: target=60 temp=59.9 pwm=0.155 raspberry_pi: temp=40.8 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=1.11 cputime=457.777 memavail=694788 print_time=4428.105 buffer_time=2.071 print_stall=0 extruder: target=220 temp=220.3 pwm=0.542
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4425.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=2718316 bytes_read=1757430 bytes_retransmit=0 bytes_invalid=0 send_seq=76199 receive_seq=76199 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=4116 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=25270 bytes_read=79726 bytes_retransmit=0 bytes_invalid=0 send_seq=4186 receive_seq=4186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999516 adj=49999302 sd_pos=375847 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.11 cputime=458.084 memavail=694788 print_time=4429.110 buffer_time=2.075 print_stall=0 extruder: target=220 temp=220.2 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4426.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2725732 bytes_read=1758520 bytes_retransmit=0 bytes_invalid=0 send_seq=76323 receive_seq=76323 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3886 freq=180001298 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=25276 bytes_read=79742 bytes_retransmit=0 bytes_invalid=0 send_seq=4187 receive_seq=4187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999515 adj=49999266 sd_pos=376704 heater_bed: target=60 temp=59.9 pwm=0.144 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.11 cputime=458.532 memavail=695044 print_time=4430.434 buffer_time=2.390 print_stall=0 extruder: target=220 temp=220.0 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4427.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2732107 bytes_read=1759466 bytes_retransmit=0 bytes_invalid=0 send_seq=76432 receive_seq=76432 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=6761 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=25282 bytes_read=79758 bytes_retransmit=0 bytes_invalid=0 send_seq=4188 receive_seq=4188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999514 adj=49999216 sd_pos=378193 heater_bed: target=60 temp=59.8 pwm=0.176 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.11 cputime=458.872 memavail=695044 print_time=4431.629 buffer_time=2.584 print_stall=0 extruder: target=220 temp=219.8 pwm=0.677
Stats 4428.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2737080 bytes_read=1760337 bytes_retransmit=0 bytes_invalid=0 send_seq=76521 receive_seq=76521 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=15592 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=25288 bytes_read=79774 bytes_retransmit=0 bytes_invalid=0 send_seq=4189 receive_seq=4189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999216 sd_pos=380715 heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.11 cputime=459.088 memavail=695172 print_time=4433.272 buffer_time=3.226 print_stall=0 extruder: target=220 temp=219.7 pwm=0.677
Stats 4429.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2744389 bytes_read=1761416 bytes_retransmit=0 bytes_invalid=0 send_seq=76647 receive_seq=76646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=9140 freq=180001288 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=25294 bytes_read=79790 bytes_retransmit=0 bytes_invalid=0 send_seq=4190 receive_seq=4190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999239 sd_pos=380715 heater_bed: target=60 temp=59.8 pwm=0.175 raspberry_pi: temp=41.3 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=1.02 cputime=459.217 memavail=694860 print_time=4433.272 buffer_time=2.225 print_stall=0 extruder: target=220 temp=219.8 pwm=0.627
Stats 4430.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2753436 bytes_read=1762582 bytes_retransmit=0 bytes_invalid=0 send_seq=76799 receive_seq=76799 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=13928 freq=180001298 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25300 bytes_read=79819 bytes_retransmit=0 bytes_invalid=0 send_seq=4191 receive_seq=4191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999260 sd_pos=383125 heater_bed: target=60 temp=59.8 pwm=0.261 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.2 sysload=1.02 cputime=459.438 memavail=694932 print_time=4434.843 buffer_time=2.795 print_stall=0 extruder: target=220 temp=219.9 pwm=0.627
Stats 4431.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2762192 bytes_read=1763759 bytes_retransmit=0 bytes_invalid=0 send_seq=76948 receive_seq=76948 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=12102 freq=180001323 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25306 bytes_read=79834 bytes_retransmit=0 bytes_invalid=0 send_seq=4192 receive_seq=4192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999519 adj=49999207 sd_pos=383803 heater_bed: target=60 temp=59.9 pwm=0.105 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.1 sysload=1.02 cputime=459.642 memavail=694932 print_time=4435.714 buffer_time=2.667 print_stall=0 extruder: target=220 temp=220.1 pwm=0.574
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4432.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2771608 bytes_read=1764993 bytes_retransmit=0 bytes_invalid=0 send_seq=77106 receive_seq=77106 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=17244 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25312 bytes_read=79849 bytes_retransmit=0 bytes_invalid=0 send_seq=4193 receive_seq=4193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999129 sd_pos=386131 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.2 sysload=1.02 cputime=460.009 memavail=694796 print_time=4437.274 buffer_time=3.225 print_stall=0 extruder: target=220 temp=220.3 pwm=0.522
Stats 4433.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2780308 bytes_read=1766129 bytes_retransmit=0 bytes_invalid=0 send_seq=77253 receive_seq=77253 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=9497 freq=180001311 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25318 bytes_read=79864 bytes_retransmit=0 bytes_invalid=0 send_seq=4194 receive_seq=4194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999154 sd_pos=386131 heater_bed: target=60 temp=59.9 pwm=0.067 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=1.02 cputime=460.132 memavail=694932 print_time=4437.274 buffer_time=2.225 print_stall=0 extruder: target=220 temp=220.3 pwm=0.522
Stats 4434.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2787922 bytes_read=1767205 bytes_retransmit=0 bytes_invalid=0 send_seq=77383 receive_seq=77383 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=20209 freq=180001305 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=25324 bytes_read=79879 bytes_retransmit=0 bytes_invalid=0 send_seq=4195 receive_seq=4195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999206 sd_pos=389131 heater_bed: target=60 temp=59.9 pwm=0.165 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.94 cputime=460.380 memavail=694932 print_time=4439.101 buffer_time=3.050 print_stall=0 extruder: target=220 temp=220.3 pwm=0.522
Stats 4435.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2798619 bytes_read=1768549 bytes_retransmit=0 bytes_invalid=0 send_seq=77563 receive_seq=77563 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=10548 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25330 bytes_read=79907 bytes_retransmit=0 bytes_invalid=0 send_seq=4196 receive_seq=4196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999190 sd_pos=389131 heater_bed: target=60 temp=59.9 pwm=0.165 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=0.94 cputime=460.545 memavail=694900 print_time=4439.101 buffer_time=2.050 print_stall=0 extruder: target=220 temp=220.3 pwm=0.522
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4436.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2809272 bytes_read=1769848 bytes_retransmit=0 bytes_invalid=0 send_seq=77741 receive_seq=77741 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=20 stalled_bytes=14176 freq=180001289 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25336 bytes_read=79923 bytes_retransmit=0 bytes_invalid=0 send_seq=4197 receive_seq=4197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999518 adj=49999201 sd_pos=391007 heater_bed: target=60 temp=59.9 pwm=0.118 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.3 sysload=0.94 cputime=460.902 memavail=694920 print_time=4440.557 buffer_time=2.506 print_stall=0 extruder: target=220 temp=220.1 pwm=0.611
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4437.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2820243 bytes_read=1771190 bytes_retransmit=0 bytes_invalid=0 send_seq=77924 receive_seq=77923 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=9820 freq=180001311 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25342 bytes_read=79939 bytes_retransmit=0 bytes_invalid=0 send_seq=4198 receive_seq=4198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999198 sd_pos=391685 heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.94 cputime=461.650 memavail=694944 print_time=4441.243 buffer_time=2.169 print_stall=0 extruder: target=220 temp=219.8 pwm=0.675
Stats 4438.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2829949 bytes_read=1772425 bytes_retransmit=0 bytes_invalid=0 send_seq=78088 receive_seq=78087 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=9582 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25348 bytes_read=79955 bytes_retransmit=0 bytes_invalid=0 send_seq=4199 receive_seq=4199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999169 sd_pos=393112 heater_bed: target=60 temp=59.9 pwm=0.176 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.94 cputime=461.812 memavail=694956 print_time=4442.415 buffer_time=2.341 print_stall=0 extruder: target=220 temp=219.8 pwm=0.675
Stats 4439.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2839612 bytes_read=1773651 bytes_retransmit=0 bytes_invalid=0 send_seq=78250 receive_seq=78250 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=5815 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25354 bytes_read=79971 bytes_retransmit=0 bytes_invalid=0 send_seq=4200 receive_seq=4200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999186 sd_pos=393645 heater_bed: target=60 temp=59.9 pwm=0.171 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=0.86 cputime=462.034 memavail=694956 print_time=4443.472 buffer_time=2.398 print_stall=0 extruder: target=220 temp=219.8 pwm=0.598
Stats 4440.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2847766 bytes_read=1774786 bytes_retransmit=0 bytes_invalid=0 send_seq=78388 receive_seq=78388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=3030 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25360 bytes_read=80000 bytes_retransmit=0 bytes_invalid=0 send_seq=4201 receive_seq=4201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999183 sd_pos=393985 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.86 cputime=462.264 memavail=694956 print_time=4444.477 buffer_time=2.402 print_stall=0 extruder: target=220 temp=220.1 pwm=0.533
Stats 4442.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2854152 bytes_read=1775767 bytes_retransmit=0 bytes_invalid=0 send_seq=78499 receive_seq=78498 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=19618 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25366 bytes_read=80016 bytes_retransmit=0 bytes_invalid=0 send_seq=4202 receive_seq=4202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999101 sd_pos=397619 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=0.86 cputime=462.631 memavail=694852 print_time=4447.185 buffer_time=4.029 print_stall=0 extruder: target=220 temp=220.4 pwm=0.479
Stats 4443.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2859541 bytes_read=1776663 bytes_retransmit=0 bytes_invalid=0 send_seq=78592 receive_seq=78592 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=14878 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25372 bytes_read=80032 bytes_retransmit=0 bytes_invalid=0 send_seq=4203 receive_seq=4203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999526 adj=49999175 sd_pos=397619 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=0.86 cputime=462.727 memavail=694956 print_time=4447.185 buffer_time=3.028 print_stall=0 extruder: target=220 temp=220.5 pwm=0.479
Stats 4444.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2864506 bytes_read=1777557 bytes_retransmit=0 bytes_invalid=0 send_seq=78680 receive_seq=78680 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=10562 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25378 bytes_read=80048 bytes_retransmit=0 bytes_invalid=0 send_seq=4204 receive_seq=4204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999527 adj=49999216 sd_pos=397619 heater_bed: target=60 temp=59.9 pwm=0.119 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.2 sysload=0.86 cputime=462.876 memavail=694956 print_time=4447.185 buffer_time=2.027 print_stall=0 extruder: target=220 temp=220.4 pwm=0.536
Stats 4445.0: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2875436 bytes_read=1778868 bytes_retransmit=0 bytes_invalid=0 send_seq=78862 receive_seq=78862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=18724 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25384 bytes_read=80064 bytes_retransmit=0 bytes_invalid=0 send_seq=4205 receive_seq=4205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999228 sd_pos=400941 heater_bed: target=60 temp=59.9 pwm=0.086 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.79 cputime=463.163 memavail=694704 print_time=4449.121 buffer_time=2.962 print_stall=0 extruder: target=220 temp=220.3 pwm=0.536
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4446.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2888336 bytes_read=1780418 bytes_retransmit=0 bytes_invalid=0 send_seq=79078 receive_seq=79077 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=11843 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25390 bytes_read=80093 bytes_retransmit=0 bytes_invalid=0 send_seq=4206 receive_seq=4206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999223 sd_pos=401893 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=0.79 cputime=463.681 memavail=694704 print_time=4449.651 buffer_time=2.250 print_stall=0 extruder: target=220 temp=219.9 pwm=0.650
Stats 4447.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2898470 bytes_read=1781713 bytes_retransmit=0 bytes_invalid=0 send_seq=79248 receive_seq=79247 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=8123 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25396 bytes_read=80109 bytes_retransmit=0 bytes_invalid=0 send_seq=4207 receive_seq=4207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999179 sd_pos=402263 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=0.79 cputime=463.876 memavail=694144 print_time=4450.803 buffer_time=2.400 print_stall=0 extruder: target=220 temp=219.6 pwm=0.650
Stats 4448.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2908839 bytes_read=1783003 bytes_retransmit=0 bytes_invalid=0 send_seq=79424 receive_seq=79422 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=3335 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25402 bytes_read=80125 bytes_retransmit=0 bytes_invalid=0 send_seq=4208 receive_seq=4208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999195 sd_pos=402656 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.79 cputime=464.068 memavail=694224 print_time=4451.849 buffer_time=2.445 print_stall=0 extruder: target=220 temp=219.5 pwm=0.650
Stats 4449.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2915040 bytes_read=1783954 bytes_retransmit=0 bytes_invalid=0 send_seq=79530 receive_seq=79530 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=2395 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25408 bytes_read=80141 bytes_retransmit=0 bytes_invalid=0 send_seq=4209 receive_seq=4209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999137 sd_pos=402997 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.81 cputime=464.286 memavail=694224 print_time=4452.896 buffer_time=2.484 print_stall=0 extruder: target=220 temp=219.5 pwm=0.650
Stats 4450.2: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2920039 bytes_read=1784829 bytes_retransmit=0 bytes_invalid=0 send_seq=79616 receive_seq=79616 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=347 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=25414 bytes_read=80157 bytes_retransmit=0 bytes_invalid=0 send_seq=4210 receive_seq=4210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999100 sd_pos=403181 heater_bed: target=60 temp=60.0 pwm=0.121 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.81 cputime=464.399 memavail=694120 print_time=4453.424 buffer_time=2.011 print_stall=0 extruder: target=220 temp=219.8 pwm=0.592
Stats 4451.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2925093 bytes_read=1785720 bytes_retransmit=0 bytes_invalid=0 send_seq=79706 receive_seq=79706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=517 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25420 bytes_read=80186 bytes_retransmit=0 bytes_invalid=0 send_seq=4211 receive_seq=4211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999126 sd_pos=403519 heater_bed: target=60 temp=60.1 pwm=0.121 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.2 sysload=0.81 cputime=464.569 memavail=694232 print_time=4454.483 buffer_time=2.070 print_stall=0 extruder: target=220 temp=220.0 pwm=0.525
Stats 4452.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2929956 bytes_read=1786566 bytes_retransmit=0 bytes_invalid=0 send_seq=79793 receive_seq=79793 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=1065 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25426 bytes_read=80202 bytes_retransmit=0 bytes_invalid=0 send_seq=4212 receive_seq=4212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999519 adj=49999101 sd_pos=403854 heater_bed: target=60 temp=60.1 pwm=0.121 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=0.81 cputime=464.736 memavail=694232 print_time=4455.543 buffer_time=2.129 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
Stats 4453.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2934862 bytes_read=1787456 bytes_retransmit=0 bytes_invalid=0 send_seq=79880 receive_seq=79880 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=1599 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25432 bytes_read=80218 bytes_retransmit=0 bytes_invalid=0 send_seq=4213 receive_seq=4213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999517 adj=49999090 sd_pos=404192 heater_bed: target=60 temp=60.1 pwm=0.074 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.81 cputime=464.904 memavail=694128 print_time=4456.594 buffer_time=2.179 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
Stats 4454.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2940107 bytes_read=1788331 bytes_retransmit=0 bytes_invalid=0 send_seq=79970 receive_seq=79970 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=1945 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25438 bytes_read=80234 bytes_retransmit=0 bytes_invalid=0 send_seq=4214 receive_seq=4214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999517 adj=49999037 sd_pos=404530 heater_bed: target=60 temp=60.0 pwm=0.138 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.91 cputime=465.113 memavail=694236 print_time=4457.625 buffer_time=2.209 print_stall=0 extruder: target=220 temp=220.1 pwm=0.611
Stats 4455.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=2945131 bytes_read=1789172 bytes_retransmit=0 bytes_invalid=0 send_seq=80058 receive_seq=80058 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=2488 freq=180001324 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25444 bytes_read=80250 bytes_retransmit=0 bytes_invalid=0 send_seq=4215 receive_seq=4215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999088 sd_pos=404864 heater_bed: target=60 temp=60.1 pwm=0.138 raspberry_pi: temp=40.8 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.91 cputime=465.325 memavail=694236 print_time=4458.627 buffer_time=2.210 print_stall=0 extruder: target=220 temp=220.0 pwm=0.611
Stats 4456.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2950634 bytes_read=1790128 bytes_retransmit=0 bytes_invalid=0 send_seq=80155 receive_seq=80155 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=2696 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=25450 bytes_read=80279 bytes_retransmit=0 bytes_invalid=0 send_seq=4216 receive_seq=4216 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999159 sd_pos=405196 heater_bed: target=60 temp=60.0 pwm=0.138 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=0.91 cputime=465.554 memavail=694124 print_time=4459.594 buffer_time=2.176 print_stall=0 extruder: target=220 temp=219.6 pwm=0.661
Stats 4457.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2956219 bytes_read=1791033 bytes_retransmit=0 bytes_invalid=0 send_seq=80251 receive_seq=80251 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=2814 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=25456 bytes_read=80295 bytes_retransmit=0 bytes_invalid=0 send_seq=4217 receive_seq=4217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999157 sd_pos=405530 heater_bed: target=60 temp=59.9 pwm=0.214 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.91 cputime=465.722 memavail=694500 print_time=4460.525 buffer_time=2.106 print_stall=0 extruder: target=220 temp=219.4 pwm=0.741
Stats 4458.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2962493 bytes_read=1791974 bytes_retransmit=0 bytes_invalid=0 send_seq=80357 receive_seq=80354 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=5296 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=25462 bytes_read=80311 bytes_retransmit=0 bytes_invalid=0 send_seq=4218 receive_seq=4218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999168 sd_pos=406082 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=0.91 cputime=465.951 memavail=694500 print_time=4461.983 buffer_time=2.543 print_stall=0 extruder: target=220 temp=219.4 pwm=0.741
Stats 4459.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2968541 bytes_read=1792953 bytes_retransmit=0 bytes_invalid=0 send_seq=80461 receive_seq=80461 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2906 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=25468 bytes_read=80327 bytes_retransmit=0 bytes_invalid=0 send_seq=4219 receive_seq=4219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999198 sd_pos=406305 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.91 cputime=466.100 memavail=694396 print_time=4462.519 buffer_time=2.080 print_stall=0 extruder: target=220 temp=219.4 pwm=0.679
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4460.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=2974712 bytes_read=1793899 bytes_retransmit=0 bytes_invalid=0 send_seq=80568 receive_seq=80568 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=5796 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=25474 bytes_read=80343 bytes_retransmit=0 bytes_invalid=0 send_seq=4220 receive_seq=4220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999521 adj=49999218 sd_pos=407176 heater_bed: target=60 temp=59.9 pwm=0.129 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.5 sysload=0.91 cputime=466.442 memavail=694508 print_time=4463.900 buffer_time=2.460 print_stall=0 extruder: target=220 temp=219.6 pwm=0.607
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4461.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=2981261 bytes_read=1794897 bytes_retransmit=0 bytes_invalid=0 send_seq=80682 receive_seq=80682 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=4351 freq=180001289 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25480 bytes_read=80372 bytes_retransmit=0 bytes_invalid=0 send_seq=4221 receive_seq=4221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999520 adj=49999216 sd_pos=408256 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.91 cputime=466.756 memavail=694508 print_time=4464.653 buffer_time=2.212 print_stall=0 extruder: target=220 temp=219.9 pwm=0.607
Stats 4462.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=2987791 bytes_read=1795889 bytes_retransmit=0 bytes_invalid=0 send_seq=80793 receive_seq=80793 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=4655 freq=180001284 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25486 bytes_read=80388 bytes_retransmit=0 bytes_invalid=0 send_seq=4222 receive_seq=4222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999519 adj=49999232 sd_pos=411016 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.5 sysload=0.91 cputime=466.975 memavail=694512 print_time=4465.656 buffer_time=2.214 print_stall=0 extruder: target=220 temp=220.3 pwm=0.537
Stats 4463.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=2994518 bytes_read=1796875 bytes_retransmit=0 bytes_invalid=0 send_seq=80910 receive_seq=80910 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=5109 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25492 bytes_read=80404 bytes_retransmit=0 bytes_invalid=0 send_seq=4223 receive_seq=4223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999228 sd_pos=413976 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=0.91 cputime=467.209 memavail=694512 print_time=4466.742 buffer_time=2.299 print_stall=0 extruder: target=220 temp=220.3 pwm=0.537
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4464.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3001435 bytes_read=1797901 bytes_retransmit=0 bytes_invalid=0 send_seq=81030 receive_seq=81030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=6425 freq=180001297 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25498 bytes_read=80420 bytes_retransmit=0 bytes_invalid=0 send_seq=4224 receive_seq=4224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999228 sd_pos=416885 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.92 cputime=467.592 memavail=694512 print_time=4467.887 buffer_time=2.439 print_stall=0 extruder: target=220 temp=220.3 pwm=0.537
Stats 4465.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=3007537 bytes_read=1798870 bytes_retransmit=0 bytes_invalid=0 send_seq=81136 receive_seq=81135 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=6917 freq=180001289 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25504 bytes_read=80436 bytes_retransmit=0 bytes_invalid=0 send_seq=4225 receive_seq=4225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999215 sd_pos=419707 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.92 cputime=467.799 memavail=694164 print_time=4468.896 buffer_time=2.446 print_stall=0 extruder: target=220 temp=220.1 pwm=0.611
Stats 4466.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3015241 bytes_read=1799937 bytes_retransmit=0 bytes_invalid=0 send_seq=81265 receive_seq=81265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=3993 freq=180001282 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25510 bytes_read=80465 bytes_retransmit=0 bytes_invalid=0 send_seq=4226 receive_seq=4226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999221 sd_pos=421196 heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.92 cputime=467.963 memavail=694268 print_time=4469.527 buffer_time=2.070 print_stall=0 extruder: target=220 temp=219.9 pwm=0.666
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4467.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3021896 bytes_read=1800947 bytes_retransmit=0 bytes_invalid=0 send_seq=81379 receive_seq=81379 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=4785 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25516 bytes_read=80481 bytes_retransmit=0 bytes_invalid=0 send_seq=4227 receive_seq=4227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999228 sd_pos=424044 heater_bed: target=60 temp=60.0 pwm=0.057 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=0.92 cputime=468.316 memavail=694020 print_time=4470.565 buffer_time=2.106 print_stall=0 extruder: target=220 temp=219.7 pwm=0.666
Stats 4468.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3028667 bytes_read=1801957 bytes_retransmit=0 bytes_invalid=0 send_seq=81495 receive_seq=81495 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=5115 freq=180001284 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25522 bytes_read=80497 bytes_retransmit=0 bytes_invalid=0 send_seq=4228 receive_seq=4228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999522 adj=49999191 sd_pos=426935 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=41.9 mcu_temp: temp=37.6 chamber: temp=30.5 sysload=0.92 cputime=468.540 memavail=693916 print_time=4471.654 buffer_time=2.195 print_stall=0 extruder: target=220 temp=219.7 pwm=0.666
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4469.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3036016 bytes_read=1802978 bytes_retransmit=0 bytes_invalid=0 send_seq=81619 receive_seq=81619 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=5820 freq=180001287 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25528 bytes_read=80513 bytes_retransmit=0 bytes_invalid=0 send_seq=4229 receive_seq=4229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999206 sd_pos=429826 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.93 cputime=468.911 memavail=694020 print_time=4472.769 buffer_time=2.308 print_stall=0 extruder: target=220 temp=219.7 pwm=0.666
Stats 4470.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3042651 bytes_read=1803968 bytes_retransmit=0 bytes_invalid=0 send_seq=81731 receive_seq=81731 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5166 freq=180001288 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25534 bytes_read=80529 bytes_retransmit=0 bytes_invalid=0 send_seq=4230 receive_seq=4230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999524 adj=49999193 sd_pos=431957 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=0.93 cputime=469.171 memavail=694028 print_time=4473.614 buffer_time=2.153 print_stall=0 extruder: target=220 temp=220.0 pwm=0.599
Stats 4471.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3049755 bytes_read=1805029 bytes_retransmit=0 bytes_invalid=0 send_seq=81853 receive_seq=81852 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3798 freq=180001278 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25540 bytes_read=80558 bytes_retransmit=0 bytes_invalid=0 send_seq=4231 receive_seq=4231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999207 sd_pos=434388 heater_bed: target=60 temp=60.0 pwm=0.077 raspberry_pi: temp=41.3 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.93 cputime=469.380 memavail=693976 print_time=4474.616 buffer_time=2.154 print_stall=0 extruder: target=220 temp=220.2 pwm=0.547
Stats 4472.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3056934 bytes_read=1806045 bytes_retransmit=0 bytes_invalid=0 send_seq=81975 receive_seq=81975 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=2584 freq=180001274 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25546 bytes_read=80574 bytes_retransmit=0 bytes_invalid=0 send_seq=4232 receive_seq=4232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999523 adj=49999222 sd_pos=436856 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=40.8 mcu_temp: temp=37.6 chamber: temp=30.5 sysload=0.93 cputime=469.656 memavail=694032 print_time=4475.588 buffer_time=2.125 print_stall=0 extruder: target=220 temp=220.5 pwm=0.497
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4473.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3062502 bytes_read=1806945 bytes_retransmit=0 bytes_invalid=0 send_seq=82069 receive_seq=82069 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=5582 freq=180001285 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25552 bytes_read=80590 bytes_retransmit=0 bytes_invalid=0 send_seq=4233 receive_seq=4233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999528 adj=49999230 sd_pos=438974 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.5 sysload=0.93 cputime=470.103 memavail=694032 print_time=4476.848 buffer_time=2.384 print_stall=0 extruder: target=220 temp=220.5 pwm=0.497
Stats 4474.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3068802 bytes_read=1807915 bytes_retransmit=0 bytes_invalid=0 send_seq=82175 receive_seq=82175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=2514 freq=180001280 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25558 bytes_read=80606 bytes_retransmit=0 bytes_invalid=0 send_seq=4234 receive_seq=4234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999528 adj=49999233 sd_pos=439414 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.5 sysload=0.93 cputime=470.276 memavail=693748 print_time=4477.477 buffer_time=2.013 print_stall=0 extruder: target=220 temp=220.4 pwm=0.573
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4475.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3077297 bytes_read=1809046 bytes_retransmit=0 bytes_invalid=0 send_seq=82321 receive_seq=82321 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=449 freq=180001276 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25564 bytes_read=80622 bytes_retransmit=0 bytes_invalid=0 send_seq=4235 receive_seq=4235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999530 adj=49999241 sd_pos=440399 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=0.93 cputime=470.625 memavail=693780 print_time=4479.053 buffer_time=2.588 print_stall=0 extruder: target=220 temp=220.3 pwm=0.573
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4476.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3082610 bytes_read=1810071 bytes_retransmit=0 bytes_invalid=0 send_seq=82418 receive_seq=82418 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=3492 freq=180001276 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25576 bytes_read=80667 bytes_retransmit=0 bytes_invalid=0 send_seq=4237 receive_seq=4237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999255 sd_pos=441783 heater_bed: target=60 temp=60.0 pwm=0.097 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=0.93 cputime=471.248 memavail=693980 print_time=4480.502 buffer_time=2.719 print_stall=0 extruder: target=220 temp=220.0 pwm=0.663
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4477.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3086909 bytes_read=1810891 bytes_retransmit=0 bytes_invalid=0 send_seq=82495 receive_seq=82494 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=10901 freq=180001274 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25582 bytes_read=80683 bytes_retransmit=0 bytes_invalid=0 send_seq=4238 receive_seq=4238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999261 sd_pos=444173 heater_bed: target=60 temp=60.0 pwm=0.188 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.93 cputime=471.825 memavail=693744 print_time=4481.795 buffer_time=2.858 print_stall=0 extruder: target=220 temp=219.9 pwm=0.663
Stats 4478.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3092238 bytes_read=1811805 bytes_retransmit=0 bytes_invalid=0 send_seq=82587 receive_seq=82586 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=17928 freq=180001272 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25588 bytes_read=80699 bytes_retransmit=0 bytes_invalid=0 send_seq=4239 receive_seq=4239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999532 adj=49999251 sd_pos=446161 heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=41.9 mcu_temp: temp=37.5 chamber: temp=30.6 sysload=0.93 cputime=472.025 memavail=693800 print_time=4483.103 buffer_time=3.166 print_stall=0 extruder: target=220 temp=219.8 pwm=0.663
Stats 4479.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3100821 bytes_read=1812951 bytes_retransmit=0 bytes_invalid=0 send_seq=82733 receive_seq=82733 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=10239 freq=180001275 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=25594 bytes_read=80715 bytes_retransmit=0 bytes_invalid=0 send_seq=4240 receive_seq=4240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999227 sd_pos=446161 heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.5 sysload=0.94 cputime=472.143 memavail=693800 print_time=4483.103 buffer_time=2.165 print_stall=0 extruder: target=220 temp=219.9 pwm=0.611
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4480.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=3111901 bytes_read=1814330 bytes_retransmit=0 bytes_invalid=0 send_seq=82918 receive_seq=82917 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=12826 freq=180001279 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25600 bytes_read=80744 bytes_retransmit=0 bytes_invalid=0 send_seq=4241 receive_seq=4241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999228 sd_pos=447709 heater_bed: target=60 temp=60.0 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.94 cputime=472.531 memavail=693812 print_time=4484.803 buffer_time=2.738 print_stall=0 extruder: target=220 temp=220.1 pwm=0.530
Stats 4481.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3121934 bytes_read=1815592 bytes_retransmit=0 bytes_invalid=0 send_seq=83087 receive_seq=83086 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=18129 freq=180001279 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25606 bytes_read=80760 bytes_retransmit=0 bytes_invalid=0 send_seq=4242 receive_seq=4242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999531 adj=49999211 sd_pos=450656 heater_bed: target=60 temp=60.0 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=0.94 cputime=472.771 memavail=693812 print_time=4486.533 buffer_time=3.468 print_stall=0 extruder: target=220 temp=220.1 pwm=0.530
Stats 4482.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3130011 bytes_read=1816722 bytes_retransmit=0 bytes_invalid=0 send_seq=83224 receive_seq=83223 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=13 stalled_bytes=11033 freq=180001279 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25612 bytes_read=80776 bytes_retransmit=0 bytes_invalid=0 send_seq=4243 receive_seq=4243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999181 sd_pos=450656 heater_bed: target=60 temp=60.0 pwm=0.168 raspberry_pi: temp=41.9 mcu_temp: temp=37.6 chamber: temp=30.3 sysload=0.94 cputime=472.894 memavail=693812 print_time=4486.533 buffer_time=2.467 print_stall=0 extruder: target=220 temp=220.3 pwm=0.530
Stats 4483.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3138420 bytes_read=1817847 bytes_retransmit=0 bytes_invalid=0 send_seq=83365 receive_seq=83365 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=19445 freq=180001275 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25618 bytes_read=80792 bytes_retransmit=0 bytes_invalid=0 send_seq=4244 receive_seq=4244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999532 adj=49999198 sd_pos=454155 heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=0.94 cputime=473.155 memavail=693604 print_time=4488.355 buffer_time=3.288 print_stall=0 extruder: target=220 temp=220.2 pwm=0.593
Stats 4484.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3147668 bytes_read=1819014 bytes_retransmit=0 bytes_invalid=0 send_seq=83521 receive_seq=83521 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11275 freq=180001274 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25624 bytes_read=80808 bytes_retransmit=0 bytes_invalid=0 send_seq=4245 receive_seq=4245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999193 sd_pos=454155 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=41.3 mcu_temp: temp=37.7 chamber: temp=30.5 sysload=0.94 cputime=473.297 memavail=693816 print_time=4488.355 buffer_time=2.287 print_stall=0 extruder: target=220 temp=220.0 pwm=0.593
Stats 4485.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3157118 bytes_read=1820251 bytes_retransmit=0 bytes_invalid=0 send_seq=83681 receive_seq=83681 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=15768 freq=180001269 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25630 bytes_read=80824 bytes_retransmit=0 bytes_invalid=0 send_seq=4246 receive_seq=4246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999531 adj=49999205 sd_pos=456819 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.94 cputime=473.547 memavail=693816 print_time=4489.893 buffer_time=2.825 print_stall=0 extruder: target=220 temp=220.0 pwm=0.593
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4486.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3167237 bytes_read=1821526 bytes_retransmit=0 bytes_invalid=0 send_seq=83851 receive_seq=83850 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=6725 freq=180001269 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25636 bytes_read=80853 bytes_retransmit=0 bytes_invalid=0 send_seq=4247 receive_seq=4247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999531 adj=49999200 sd_pos=458743 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=41.9 mcu_temp: temp=37.6 chamber: temp=30.4 sysload=0.94 cputime=473.905 memavail=693688 print_time=4489.893 buffer_time=1.812 print_stall=0 extruder: target=220 temp=219.9 pwm=0.593
Stats 4487.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3176693 bytes_read=1822738 bytes_retransmit=0 bytes_invalid=0 send_seq=84010 receive_seq=84010 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=9292 freq=180001264 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25642 bytes_read=80869 bytes_retransmit=0 bytes_invalid=0 send_seq=4248 receive_seq=4248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999213 sd_pos=459027 heater_bed: target=60 temp=60.0 pwm=0.120 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=0.94 cputime=474.059 memavail=693824 print_time=4491.161 buffer_time=2.078 print_stall=0 extruder: target=220 temp=219.9 pwm=0.620
Stats 4488.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3186621 bytes_read=1824008 bytes_retransmit=0 bytes_invalid=0 send_seq=84175 receive_seq=84175 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=9719 freq=180001268 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25648 bytes_read=80885 bytes_retransmit=0 bytes_invalid=0 send_seq=4249 receive_seq=4249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999239 sd_pos=460360 heater_bed: target=60 temp=60.0 pwm=0.120 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.94 cputime=474.265 memavail=693824 print_time=4492.634 buffer_time=2.551 print_stall=0 extruder: target=220 temp=220.0 pwm=0.620
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4489.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3196351 bytes_read=1825243 bytes_retransmit=0 bytes_invalid=0 send_seq=84339 receive_seq=84339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=11106 freq=180001269 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25654 bytes_read=80901 bytes_retransmit=0 bytes_invalid=0 send_seq=4250 receive_seq=4250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999228 sd_pos=461944 heater_bed: target=60 temp=60.1 pwm=0.057 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.95 cputime=474.651 memavail=694012 print_time=4493.766 buffer_time=2.682 print_stall=0 extruder: target=220 temp=220.1 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4490.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3203340 bytes_read=1826234 bytes_retransmit=0 bytes_invalid=0 send_seq=84458 receive_seq=84457 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=19045 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25660 bytes_read=80917 bytes_retransmit=0 bytes_invalid=0 send_seq=4251 receive_seq=4251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999195 sd_pos=464511 heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.95 cputime=475.168 memavail=694080 print_time=4495.190 buffer_time=3.085 print_stall=0 extruder: target=220 temp=220.3 pwm=0.551
Stats 4491.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3211925 bytes_read=1827440 bytes_retransmit=0 bytes_invalid=0 send_seq=84604 receive_seq=84604 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=11350 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25666 bytes_read=80946 bytes_retransmit=0 bytes_invalid=0 send_seq=4252 receive_seq=4252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49999155 sd_pos=464511 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=0.95 cputime=475.282 memavail=694080 print_time=4495.190 buffer_time=2.085 print_stall=0 extruder: target=220 temp=220.4 pwm=0.498
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4492.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3222258 bytes_read=1828715 bytes_retransmit=0 bytes_invalid=0 send_seq=84776 receive_seq=84776 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=13422 freq=180001288 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25672 bytes_read=80962 bytes_retransmit=0 bytes_invalid=0 send_seq=4253 receive_seq=4253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999186 sd_pos=466703 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.95 cputime=475.560 memavail=694092 print_time=4496.520 buffer_time=2.415 print_stall=0 extruder: target=220 temp=220.4 pwm=0.498
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4493.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3233443 bytes_read=1830046 bytes_retransmit=0 bytes_invalid=0 send_seq=84963 receive_seq=84962 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=18320 freq=180001315 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25678 bytes_read=80978 bytes_retransmit=0 bytes_invalid=0 send_seq=4254 receive_seq=4254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49999209 sd_pos=469447 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=0.95 cputime=476.142 memavail=694092 print_time=4498.118 buffer_time=3.012 print_stall=0 extruder: target=220 temp=220.3 pwm=0.554
Stats 4494.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3242854 bytes_read=1831296 bytes_retransmit=0 bytes_invalid=0 send_seq=85123 receive_seq=85123 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=9892 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25684 bytes_read=80994 bytes_retransmit=0 bytes_invalid=0 send_seq=4255 receive_seq=4255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49999115 sd_pos=469447 heater_bed: target=60 temp=60.2 pwm=0.123 raspberry_pi: temp=41.3 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.03 cputime=476.281 memavail=694092 print_time=4498.118 buffer_time=2.012 print_stall=0 extruder: target=220 temp=220.2 pwm=0.554
Stats 4495.9: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3252957 bytes_read=1832551 bytes_retransmit=0 bytes_invalid=0 send_seq=85291 receive_seq=85291 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=4723 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25690 bytes_read=81010 bytes_retransmit=0 bytes_invalid=0 send_seq=4256 receive_seq=4256 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49999130 sd_pos=469886 heater_bed: target=60 temp=60.2 pwm=0.065 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=1.03 cputime=476.475 memavail=693812 print_time=4499.118 buffer_time=2.010 print_stall=0 extruder: target=220 temp=220.0 pwm=0.612
Stats 4496.9: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3263492 bytes_read=1833843 bytes_retransmit=0 bytes_invalid=0 send_seq=85466 receive_seq=85466 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=7 stalled_bytes=327 freq=180001450 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25696 bytes_read=81039 bytes_retransmit=0 bytes_invalid=0 send_seq=4257 receive_seq=4257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999538 adj=49998914 sd_pos=470639 heater_bed: target=60 temp=60.2 pwm=0.065 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=1.03 cputime=476.711 memavail=693584 print_time=4500.539 buffer_time=2.431 print_stall=0 extruder: target=220 temp=219.9 pwm=0.612
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4497.9: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3267893 bytes_read=1834708 bytes_retransmit=0 bytes_invalid=0 send_seq=85548 receive_seq=85548 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=855 freq=180001447 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25702 bytes_read=81055 bytes_retransmit=0 bytes_invalid=0 send_seq=4258 receive_seq=4258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49998737 sd_pos=471890 heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.03 cputime=477.036 memavail=693592 print_time=4501.599 buffer_time=2.490 print_stall=0 extruder: target=220 temp=219.9 pwm=0.612
Stats 4498.9: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3272277 bytes_read=1835523 bytes_retransmit=0 bytes_invalid=0 send_seq=85626 receive_seq=85626 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=3130 freq=180001449 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25708 bytes_read=81071 bytes_retransmit=0 bytes_invalid=0 send_seq=4259 receive_seq=4259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49998858 sd_pos=474522 heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.03 cputime=477.238 memavail=693796 print_time=4502.616 buffer_time=2.480 print_stall=0 extruder: target=220 temp=219.9 pwm=0.612
Stats 4499.9: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3276177 bytes_read=1836319 bytes_retransmit=0 bytes_invalid=0 send_seq=85701 receive_seq=85700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=6081 freq=180001433 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25714 bytes_read=81087 bytes_retransmit=0 bytes_invalid=0 send_seq=4260 receive_seq=4260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999537 adj=49998877 sd_pos=477236 heater_bed: target=60 temp=60.2 pwm=0.048 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.03 cputime=477.439 memavail=693844 print_time=4503.660 buffer_time=2.523 print_stall=0 extruder: target=220 temp=220.0 pwm=0.562
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4500.9: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3282269 bytes_read=1837313 bytes_retransmit=0 bytes_invalid=0 send_seq=85810 receive_seq=85810 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=3813 freq=180001414 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25720 bytes_read=81103 bytes_retransmit=0 bytes_invalid=0 send_seq=4261 receive_seq=4261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49998950 sd_pos=478349 heater_bed: target=60 temp=60.1 pwm=0.173 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=1.03 cputime=477.735 memavail=693844 print_time=4504.146 buffer_time=2.008 print_stall=0 extruder: target=220 temp=220.1 pwm=0.562
Stats 4501.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3288468 bytes_read=1838270 bytes_retransmit=0 bytes_invalid=0 send_seq=85916 receive_seq=85916 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=7324 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25726 bytes_read=81132 bytes_retransmit=0 bytes_invalid=0 send_seq=4262 receive_seq=4262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49998988 sd_pos=482200 heater_bed: target=60 temp=60.2 pwm=0.118 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.03 cputime=477.989 memavail=693800 print_time=4505.645 buffer_time=2.507 print_stall=0 extruder: target=220 temp=220.1 pwm=0.562
Stats 4502.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3295900 bytes_read=1839321 bytes_retransmit=0 bytes_invalid=0 send_seq=86043 receive_seq=86043 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4255 freq=180001394 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25732 bytes_read=81148 bytes_retransmit=0 bytes_invalid=0 send_seq=4263 receive_seq=4263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999049 sd_pos=483542 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=1.03 cputime=478.171 memavail=693848 print_time=4506.234 buffer_time=2.095 print_stall=0 extruder: target=220 temp=220.1 pwm=0.562
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4503.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3302778 bytes_read=1840345 bytes_retransmit=0 bytes_invalid=0 send_seq=86159 receive_seq=86159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=7446 freq=180001379 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25738 bytes_read=81164 bytes_retransmit=0 bytes_invalid=0 send_seq=4264 receive_seq=4264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999532 adj=49999079 sd_pos=487145 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.03 cputime=478.548 memavail=693848 print_time=4507.681 buffer_time=2.541 print_stall=0 extruder: target=220 temp=219.9 pwm=0.624
Stats 4504.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3309358 bytes_read=1841316 bytes_retransmit=0 bytes_invalid=0 send_seq=86271 receive_seq=86271 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=4176 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25744 bytes_read=81180 bytes_retransmit=0 bytes_invalid=0 send_seq=4265 receive_seq=4265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999532 adj=49999136 sd_pos=488615 heater_bed: target=60 temp=60.0 pwm=0.216 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=1.19 cputime=478.720 memavail=693860 print_time=4508.153 buffer_time=2.012 print_stall=0 extruder: target=220 temp=219.8 pwm=0.624
Stats 4505.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3316839 bytes_read=1842362 bytes_retransmit=0 bytes_invalid=0 send_seq=86397 receive_seq=86397 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=4217 freq=180001370 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=25750 bytes_read=81196 bytes_retransmit=0 bytes_invalid=0 send_seq=4266 receive_seq=4266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999158 sd_pos=491278 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=1.19 cputime=478.958 memavail=693860 print_time=4509.236 buffer_time=2.095 print_stall=0 extruder: target=220 temp=219.8 pwm=0.624
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4506.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3323318 bytes_read=1843367 bytes_retransmit=0 bytes_invalid=0 send_seq=86506 receive_seq=86506 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4209 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=25756 bytes_read=81225 bytes_retransmit=0 bytes_invalid=0 send_seq=4267 receive_seq=4267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49999202 sd_pos=493719 heater_bed: target=60 temp=60.0 pwm=0.198 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=1.19 cputime=479.311 memavail=694060 print_time=4510.245 buffer_time=2.103 print_stall=0 extruder: target=220 temp=219.8 pwm=0.624
Stats 4508.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3330534 bytes_read=1844383 bytes_retransmit=0 bytes_invalid=0 send_seq=86628 receive_seq=86627 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=3583 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=25762 bytes_read=81241 bytes_retransmit=0 bytes_invalid=0 send_seq=4268 receive_seq=4268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999534 adj=49999234 sd_pos=496500 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=1.19 cputime=479.545 memavail=693828 print_time=4511.443 buffer_time=2.280 print_stall=0 extruder: target=220 temp=219.8 pwm=0.597
Stats 4509.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3336876 bytes_read=1845338 bytes_retransmit=0 bytes_invalid=0 send_seq=86735 receive_seq=86735 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=3168 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=25768 bytes_read=81257 bytes_retransmit=0 bytes_invalid=0 send_seq=4269 receive_seq=4269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999532 adj=49999211 sd_pos=498586 heater_bed: target=60 temp=60.0 pwm=0.068 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=1.19 cputime=479.737 memavail=693860 print_time=4512.368 buffer_time=2.204 print_stall=0 extruder: target=220 temp=220.0 pwm=0.597
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4510.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3342465 bytes_read=1846242 bytes_retransmit=0 bytes_invalid=0 send_seq=86831 receive_seq=86831 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=6517 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=25774 bytes_read=81273 bytes_retransmit=0 bytes_invalid=0 send_seq=4270 receive_seq=4270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999533 adj=49999208 sd_pos=500532 heater_bed: target=60 temp=60.0 pwm=0.068 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.33 cputime=480.457 memavail=693860 print_time=4514.029 buffer_time=2.865 print_stall=0 extruder: target=220 temp=220.2 pwm=0.542
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4511.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3350103 bytes_read=1847362 bytes_retransmit=0 bytes_invalid=0 send_seq=86959 receive_seq=86958 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=7927 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25780 bytes_read=81302 bytes_retransmit=0 bytes_invalid=0 send_seq=4271 receive_seq=4271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999537 adj=49999202 sd_pos=502428 heater_bed: target=60 temp=60.0 pwm=0.139 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.9 sysload=1.33 cputime=480.929 memavail=693620 print_time=4515.100 buffer_time=2.754 print_stall=0 extruder: target=220 temp=220.2 pwm=0.542
Stats 4512.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3355636 bytes_read=1848253 bytes_retransmit=0 bytes_invalid=0 send_seq=87056 receive_seq=87056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=14076 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25786 bytes_read=81318 bytes_retransmit=0 bytes_invalid=0 send_seq=4272 receive_seq=4272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999537 adj=49999221 sd_pos=504875 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=1.33 cputime=481.122 memavail=693620 print_time=4516.429 buffer_time=3.083 print_stall=0 extruder: target=220 temp=220.2 pwm=0.542
Stats 4513.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3361967 bytes_read=1849224 bytes_retransmit=0 bytes_invalid=0 send_seq=87167 receive_seq=87167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=8481 freq=180001349 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25792 bytes_read=81334 bytes_retransmit=0 bytes_invalid=0 send_seq=4273 receive_seq=4273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999536 adj=49999234 sd_pos=504875 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.9 sysload=1.33 cputime=481.230 memavail=693448 print_time=4516.429 buffer_time=2.083 print_stall=0 extruder: target=220 temp=220.1 pwm=0.542
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4514.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3371255 bytes_read=1850448 bytes_retransmit=0 bytes_invalid=0 send_seq=87324 receive_seq=87323 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=7634 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25798 bytes_read=81350 bytes_retransmit=0 bytes_invalid=0 send_seq=4274 receive_seq=4274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999199 sd_pos=506363 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=1.39 cputime=481.571 memavail=693624 print_time=4517.386 buffer_time=2.039 print_stall=0 extruder: target=220 temp=219.9 pwm=0.621
Stats 4515.2: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3380383 bytes_read=1851634 bytes_retransmit=0 bytes_invalid=0 send_seq=87478 receive_seq=87478 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=12630 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25804 bytes_read=81366 bytes_retransmit=0 bytes_invalid=0 send_seq=4275 receive_seq=4275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999535 adj=49999205 sd_pos=509165 heater_bed: target=60 temp=60.0 pwm=0.080 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=1.39 cputime=481.805 memavail=693744 print_time=4518.832 buffer_time=2.484 print_stall=0 extruder: target=220 temp=219.8 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4516.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3389393 bytes_read=1852826 bytes_retransmit=0 bytes_invalid=0 send_seq=87630 receive_seq=87630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=22990 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25810 bytes_read=81382 bytes_retransmit=0 bytes_invalid=0 send_seq=4276 receive_seq=4276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999161 sd_pos=513418 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=1.39 cputime=482.199 memavail=693744 print_time=4520.674 buffer_time=3.325 print_stall=0 extruder: target=220 temp=219.8 pwm=0.621
Stats 4517.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3398957 bytes_read=1854080 bytes_retransmit=0 bytes_invalid=0 send_seq=87792 receive_seq=87792 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=14419 freq=180001336 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25816 bytes_read=81411 bytes_retransmit=0 bytes_invalid=0 send_seq=4277 receive_seq=4277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999241 sd_pos=513418 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.39 cputime=482.381 memavail=694268 print_time=4520.674 buffer_time=2.319 print_stall=0 extruder: target=220 temp=219.7 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4518.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3410788 bytes_read=1855471 bytes_retransmit=0 bytes_invalid=0 send_seq=87991 receive_seq=87990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=12014 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25822 bytes_read=81426 bytes_retransmit=0 bytes_invalid=0 send_seq=4278 receive_seq=4278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999543 adj=49999273 sd_pos=515033 heater_bed: target=60 temp=60.1 pwm=0.074 raspberry_pi: temp=42.4 mcu_temp: temp=37.6 chamber: temp=30.8 sysload=1.39 cputime=482.998 memavail=694268 print_time=4521.908 buffer_time=2.517 print_stall=0 extruder: target=220 temp=219.8 pwm=0.621
Stats 4519.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3421823 bytes_read=1856851 bytes_retransmit=0 bytes_invalid=0 send_seq=88177 receive_seq=88177 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=3526 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25828 bytes_read=81441 bytes_retransmit=0 bytes_invalid=0 send_seq=4279 receive_seq=4279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49999293 sd_pos=515221 heater_bed: target=60 temp=60.0 pwm=0.167 raspberry_pi: temp=41.9 mcu_temp: temp=37.6 chamber: temp=30.8 sysload=1.28 cputime=483.133 memavail=694096 print_time=4522.400 buffer_time=2.008 print_stall=0 extruder: target=220 temp=219.9 pwm=0.570
Stats 4520.2: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3429429 bytes_read=1857911 bytes_retransmit=0 bytes_invalid=0 send_seq=88306 receive_seq=88306 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25834 bytes_read=81456 bytes_retransmit=0 bytes_invalid=0 send_seq=4280 receive_seq=4280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999539 adj=49999305 sd_pos=515590 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=1.28 cputime=483.296 memavail=694268 print_time=4523.404 buffer_time=2.012 print_stall=0 extruder: target=220 temp=220.2 pwm=0.502
Stats 4521.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3433682 bytes_read=1858743 bytes_retransmit=0 bytes_invalid=0 send_seq=88387 receive_seq=88387 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25840 bytes_read=81471 bytes_retransmit=0 bytes_invalid=0 send_seq=4281 receive_seq=4281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999538 adj=49999296 sd_pos=516647 heater_bed: target=60 temp=60.0 pwm=0.100 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.28 cputime=483.476 memavail=694268 print_time=4524.567 buffer_time=2.175 print_stall=0 extruder: target=220 temp=220.4 pwm=0.502
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
Stats 4522.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3439150 bytes_read=1859713 bytes_retransmit=0 bytes_invalid=0 send_seq=88490 receive_seq=88490 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=8529 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25846 bytes_read=81499 bytes_retransmit=0 bytes_invalid=0 send_seq=4282 receive_seq=4282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999538 adj=49999283 sd_pos=519207 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=1.28 cputime=484.133 memavail=694104 print_time=4526.500 buffer_time=3.107 print_stall=0 extruder: target=220 temp=220.4 pwm=0.502
Stats 4523.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3442678 bytes_read=1860453 bytes_retransmit=0 bytes_invalid=0 send_seq=88553 receive_seq=88553 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=5514 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25852 bytes_read=81515 bytes_retransmit=0 bytes_invalid=0 send_seq=4283 receive_seq=4283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999541 adj=49999200 sd_pos=519207 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.28 cputime=484.257 memavail=694280 print_time=4526.500 buffer_time=2.106 print_stall=0 extruder: target=220 temp=220.3 pwm=0.502
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4524.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3448648 bytes_read=1861399 bytes_retransmit=0 bytes_invalid=0 send_seq=88660 receive_seq=88660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=13461 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25858 bytes_read=81531 bytes_retransmit=0 bytes_invalid=0 send_seq=4284 receive_seq=4284 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999540 adj=49999150 sd_pos=521749 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=1.17 cputime=484.853 memavail=694280 print_time=4527.917 buffer_time=2.505 print_stall=0 extruder: target=220 temp=220.0 pwm=0.606
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4525.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3458165 bytes_read=1862639 bytes_retransmit=0 bytes_invalid=0 send_seq=88819 receive_seq=88819 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=12584 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25864 bytes_read=81547 bytes_retransmit=0 bytes_invalid=0 send_seq=4285 receive_seq=4285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999544 adj=49999168 sd_pos=523082 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.17 cputime=485.281 memavail=694176 print_time=4528.797 buffer_time=2.383 print_stall=0 extruder: target=220 temp=219.8 pwm=0.659
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4526.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3468140 bytes_read=1863925 bytes_retransmit=0 bytes_invalid=0 send_seq=88990 receive_seq=88990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=10478 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=25870 bytes_read=81563 bytes_retransmit=0 bytes_invalid=0 send_seq=4286 receive_seq=4286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999542 adj=49999194 sd_pos=524399 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=1.17 cputime=485.591 memavail=694176 print_time=4530.147 buffer_time=2.719 print_stall=0 extruder: target=220 temp=219.4 pwm=0.723
Stats 4527.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3478314 bytes_read=1865196 bytes_retransmit=0 bytes_invalid=0 send_seq=89161 receive_seq=89161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=2525 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25876 bytes_read=81592 bytes_retransmit=0 bytes_invalid=0 send_seq=4287 receive_seq=4287 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999546 adj=49999205 sd_pos=524511 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=1.17 cputime=485.750 memavail=694544 print_time=4530.491 buffer_time=2.061 print_stall=0 extruder: target=220 temp=219.3 pwm=0.723
Stats 4528.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3484904 bytes_read=1866200 bytes_retransmit=0 bytes_invalid=0 send_seq=89273 receive_seq=89273 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25882 bytes_read=81608 bytes_retransmit=0 bytes_invalid=0 send_seq=4288 receive_seq=4288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999545 adj=49999245 sd_pos=525124 heater_bed: target=60 temp=60.1 pwm=0.019 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.17 cputime=485.927 memavail=694424 print_time=4531.548 buffer_time=2.117 print_stall=0 extruder: target=220 temp=219.5 pwm=0.656
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4529.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3490523 bytes_read=1867131 bytes_retransmit=0 bytes_invalid=0 send_seq=89377 receive_seq=89377 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=7220 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25888 bytes_read=81624 bytes_retransmit=0 bytes_invalid=0 send_seq=4289 receive_seq=4289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999545 adj=49999231 sd_pos=527933 heater_bed: target=60 temp=60.0 pwm=0.194 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.08 cputime=486.354 memavail=694548 print_time=4533.230 buffer_time=2.799 print_stall=0 extruder: target=220 temp=219.8 pwm=0.531
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4530.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3494338 bytes_read=1867892 bytes_retransmit=0 bytes_invalid=0 send_seq=89444 receive_seq=89444 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=15933 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25894 bytes_read=81640 bytes_retransmit=0 bytes_invalid=0 send_seq=4290 receive_seq=4290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999548 adj=49999205 sd_pos=531077 heater_bed: target=60 temp=59.9 pwm=0.200 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.08 cputime=486.641 memavail=694548 print_time=4534.435 buffer_time=3.003 print_stall=0 extruder: target=220 temp=220.1 pwm=0.531
Stats 4531.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3500963 bytes_read=1868942 bytes_retransmit=0 bytes_invalid=0 send_seq=89562 receive_seq=89562 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=10058 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=25900 bytes_read=81656 bytes_retransmit=0 bytes_invalid=0 send_seq=4291 receive_seq=4291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999228 sd_pos=531077 heater_bed: target=60 temp=59.9 pwm=0.200 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=1.08 cputime=486.764 memavail=694444 print_time=4534.435 buffer_time=2.003 print_stall=0 extruder: target=220 temp=220.4 pwm=0.456
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4532.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3510801 bytes_read=1870165 bytes_retransmit=0 bytes_invalid=0 send_seq=89728 receive_seq=89728 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=8530 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25906 bytes_read=81685 bytes_retransmit=0 bytes_invalid=0 send_seq=4292 receive_seq=4292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999402 sd_pos=533334 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=1.08 cputime=487.074 memavail=694556 print_time=4535.669 buffer_time=2.236 print_stall=0 extruder: target=220 temp=220.5 pwm=0.456
Stats 4533.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3521784 bytes_read=1871493 bytes_retransmit=0 bytes_invalid=0 send_seq=89912 receive_seq=89911 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4374 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25912 bytes_read=81701 bytes_retransmit=0 bytes_invalid=0 send_seq=4293 receive_seq=4293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999564 adj=49999315 sd_pos=535983 heater_bed: target=60 temp=60.0 pwm=0.063 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=1.08 cputime=487.307 memavail=694556 print_time=4536.686 buffer_time=2.252 print_stall=0 extruder: target=220 temp=220.4 pwm=0.576
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4534.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3528084 bytes_read=1872482 bytes_retransmit=0 bytes_invalid=0 send_seq=90020 receive_seq=90020 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=5971 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25918 bytes_read=81717 bytes_retransmit=0 bytes_invalid=0 send_seq=4294 receive_seq=4294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999561 adj=49999255 sd_pos=538550 heater_bed: target=60 temp=60.0 pwm=0.064 raspberry_pi: temp=41.9 mcu_temp: temp=37.6 chamber: temp=30.7 sysload=0.99 cputime=487.648 memavail=694556 print_time=4537.731 buffer_time=2.292 print_stall=0 extruder: target=220 temp=220.0 pwm=0.627
Stats 4535.2: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3534797 bytes_read=1873453 bytes_retransmit=0 bytes_invalid=0 send_seq=90134 receive_seq=90134 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=5500 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25924 bytes_read=81733 bytes_retransmit=0 bytes_invalid=0 send_seq=4295 receive_seq=4295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999560 adj=49999233 sd_pos=541037 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.99 cputime=487.873 memavail=694552 print_time=4538.644 buffer_time=2.204 print_stall=0 extruder: target=220 temp=219.6 pwm=0.714
Stats 4536.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3541873 bytes_read=1874500 bytes_retransmit=0 bytes_invalid=0 send_seq=90255 receive_seq=90255 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=5999 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25930 bytes_read=81749 bytes_retransmit=0 bytes_invalid=0 send_seq=4296 receive_seq=4296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999559 adj=49999225 sd_pos=543769 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=0.99 cputime=488.081 memavail=694552 print_time=4539.794 buffer_time=2.354 print_stall=0 extruder: target=220 temp=219.6 pwm=0.649
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4537.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3549300 bytes_read=1875574 bytes_retransmit=0 bytes_invalid=0 send_seq=90382 receive_seq=90381 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4926 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=25936 bytes_read=81778 bytes_retransmit=0 bytes_invalid=0 send_seq=4297 receive_seq=4297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999254 sd_pos=546197 heater_bed: target=60 temp=60.0 pwm=0.163 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=0.99 cputime=488.482 memavail=694044 print_time=4540.619 buffer_time=2.178 print_stall=0 extruder: target=220 temp=219.6 pwm=0.649
Stats 4538.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3555447 bytes_read=1876505 bytes_retransmit=0 bytes_invalid=0 send_seq=90487 receive_seq=90487 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=6003 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=25942 bytes_read=81794 bytes_retransmit=0 bytes_invalid=0 send_seq=4298 receive_seq=4298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999353 sd_pos=548727 heater_bed: target=60 temp=60.0 pwm=0.163 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.99 cputime=488.693 memavail=694064 print_time=4541.717 buffer_time=2.275 print_stall=0 extruder: target=220 temp=219.8 pwm=0.567
Stats 4539.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3563120 bytes_read=1877576 bytes_retransmit=0 bytes_invalid=0 send_seq=90618 receive_seq=90618 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=6001 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=25948 bytes_read=81810 bytes_retransmit=0 bytes_invalid=0 send_seq=4299 receive_seq=4299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999310 sd_pos=551477 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=41.9 mcu_temp: temp=37.5 chamber: temp=30.7 sysload=0.91 cputime=488.910 memavail=694064 print_time=4542.811 buffer_time=2.369 print_stall=0 extruder: target=220 temp=220.1 pwm=0.567
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4540.2: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3569824 bytes_read=1878605 bytes_retransmit=0 bytes_invalid=0 send_seq=90733 receive_seq=90733 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=4442 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=25954 bytes_read=81826 bytes_retransmit=0 bytes_invalid=0 send_seq=4300 receive_seq=4300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999566 adj=49999314 sd_pos=553284 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=0.91 cputime=489.255 memavail=693724 print_time=4543.486 buffer_time=2.043 print_stall=0 extruder: target=220 temp=220.4 pwm=0.469
Stats 4541.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3576701 bytes_read=1879612 bytes_retransmit=0 bytes_invalid=0 send_seq=90851 receive_seq=90851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=4337 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=25960 bytes_read=81842 bytes_retransmit=0 bytes_invalid=0 send_seq=4301 receive_seq=4301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999307 sd_pos=555960 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=0.91 cputime=489.506 memavail=693812 print_time=4544.754 buffer_time=2.286 print_stall=0 extruder: target=220 temp=220.5 pwm=0.469
Stats 4542.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3584110 bytes_read=1880707 bytes_retransmit=0 bytes_invalid=0 send_seq=90979 receive_seq=90979 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=3247 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25966 bytes_read=81871 bytes_retransmit=0 bytes_invalid=0 send_seq=4302 receive_seq=4302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999331 sd_pos=558316 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=0.91 cputime=489.736 memavail=693812 print_time=4545.685 buffer_time=2.217 print_stall=0 extruder: target=220 temp=220.4 pwm=0.548
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4543.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3590412 bytes_read=1881682 bytes_retransmit=0 bytes_invalid=0 send_seq=91088 receive_seq=91088 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=9820 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25972 bytes_read=81887 bytes_retransmit=0 bytes_invalid=0 send_seq=4303 receive_seq=4303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999236 sd_pos=561455 heater_bed: target=60 temp=59.9 pwm=0.195 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.9 sysload=0.91 cputime=490.389 memavail=693708 print_time=4547.679 buffer_time=3.035 print_stall=0 extruder: target=220 temp=220.2 pwm=0.599
Stats 4544.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3597093 bytes_read=1882696 bytes_retransmit=0 bytes_invalid=0 send_seq=91202 receive_seq=91202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3899 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25978 bytes_read=81903 bytes_retransmit=0 bytes_invalid=0 send_seq=4304 receive_seq=4304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999566 adj=49999240 sd_pos=561455 heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.84 cputime=490.484 memavail=693824 print_time=4547.679 buffer_time=2.034 print_stall=0 extruder: target=220 temp=219.8 pwm=0.658
Stats 4545.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3602544 bytes_read=1883587 bytes_retransmit=0 bytes_invalid=0 send_seq=91298 receive_seq=91298 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2536 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25984 bytes_read=81919 bytes_retransmit=0 bytes_invalid=0 send_seq=4305 receive_seq=4305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999563 adj=49999233 sd_pos=562120 heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=0.84 cputime=490.648 memavail=693824 print_time=4548.738 buffer_time=2.093 print_stall=0 extruder: target=220 temp=219.6 pwm=0.658
Stats 4546.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3608774 bytes_read=1884579 bytes_retransmit=0 bytes_invalid=0 send_seq=91410 receive_seq=91410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=25990 bytes_read=81935 bytes_retransmit=0 bytes_invalid=0 send_seq=4306 receive_seq=4306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999561 adj=49999223 sd_pos=562656 heater_bed: target=60 temp=59.9 pwm=0.215 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.84 cputime=490.806 memavail=693776 print_time=4549.756 buffer_time=2.110 print_stall=0 extruder: target=220 temp=219.6 pwm=0.658
Stats 4547.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3613348 bytes_read=1885473 bytes_retransmit=0 bytes_invalid=0 send_seq=91498 receive_seq=91498 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=25996 bytes_read=81964 bytes_retransmit=0 bytes_invalid=0 send_seq=4307 receive_seq=4307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999560 adj=49999201 sd_pos=563709 heater_bed: target=60 temp=59.9 pwm=0.142 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.84 cputime=490.962 memavail=694332 print_time=4550.992 buffer_time=2.345 print_stall=0 extruder: target=220 temp=219.7 pwm=0.603
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4548.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3618113 bytes_read=1886339 bytes_retransmit=0 bytes_invalid=0 send_seq=91589 receive_seq=91589 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=6051 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26002 bytes_read=81980 bytes_retransmit=0 bytes_invalid=0 send_seq=4308 receive_seq=4308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999559 adj=49999205 sd_pos=565844 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=0.84 cputime=491.815 memavail=694332 print_time=4552.564 buffer_time=2.917 print_stall=0 extruder: target=220 temp=219.9 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4549.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3621887 bytes_read=1887133 bytes_retransmit=0 bytes_invalid=0 send_seq=91656 receive_seq=91656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5836 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26008 bytes_read=81996 bytes_retransmit=0 bytes_invalid=0 send_seq=4309 receive_seq=4309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999557 adj=49999215 sd_pos=566572 heater_bed: target=60 temp=59.9 pwm=0.122 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=0.77 cputime=492.108 memavail=694144 print_time=4552.908 buffer_time=2.162 print_stall=0 extruder: target=220 temp=220.2 pwm=0.549
Stats 4550.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3626635 bytes_read=1887985 bytes_retransmit=0 bytes_invalid=0 send_seq=91744 receive_seq=91744 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=5349 freq=180001294 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26014 bytes_read=82012 bytes_retransmit=0 bytes_invalid=0 send_seq=4310 receive_seq=4310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999556 adj=49999204 sd_pos=567074 heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=31.0 sysload=0.77 cputime=492.263 memavail=694344 print_time=4554.100 buffer_time=2.353 print_stall=0 extruder: target=220 temp=220.3 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4551.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3638771 bytes_read=1889495 bytes_retransmit=0 bytes_invalid=0 send_seq=91949 receive_seq=91948 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=4681 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26026 bytes_read=82057 bytes_retransmit=0 bytes_invalid=0 send_seq=4312 receive_seq=4312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999557 adj=49999208 sd_pos=569034 heater_bed: target=60 temp=59.9 pwm=0.130 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=0.77 cputime=492.848 memavail=694344 print_time=4556.037 buffer_time=2.995 print_stall=0 extruder: target=220 temp=220.2 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4553.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3643056 bytes_read=1890391 bytes_retransmit=0 bytes_invalid=0 send_seq=92031 receive_seq=92031 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=11136 freq=180001299 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26032 bytes_read=82073 bytes_retransmit=0 bytes_invalid=0 send_seq=4313 receive_seq=4313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999558 adj=49999226 sd_pos=571193 heater_bed: target=60 temp=59.9 pwm=0.095 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=31.0 sysload=0.77 cputime=493.164 memavail=694348 print_time=4557.211 buffer_time=2.963 print_stall=0 extruder: target=220 temp=219.9 pwm=0.617
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4554.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3648081 bytes_read=1891311 bytes_retransmit=0 bytes_invalid=0 send_seq=92125 receive_seq=92124 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=6768 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26038 bytes_read=82089 bytes_retransmit=0 bytes_invalid=0 send_seq=4314 receive_seq=4314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999563 adj=49999206 sd_pos=573420 heater_bed: target=60 temp=59.8 pwm=0.213 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=0.79 cputime=493.490 memavail=694348 print_time=4557.211 buffer_time=1.808 print_stall=0 extruder: target=220 temp=219.7 pwm=0.617
Stats 4555.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3657374 bytes_read=1892546 bytes_retransmit=0 bytes_invalid=0 send_seq=92282 receive_seq=92282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=9692 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26044 bytes_read=82105 bytes_retransmit=0 bytes_invalid=0 send_seq=4315 receive_seq=4315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999561 adj=49999129 sd_pos=573420 heater_bed: target=60 temp=59.8 pwm=0.158 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=0.79 cputime=493.638 memavail=693952 print_time=4558.421 buffer_time=2.018 print_stall=0 extruder: target=220 temp=219.5 pwm=0.682
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4556.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3666867 bytes_read=1893770 bytes_retransmit=0 bytes_invalid=0 send_seq=92440 receive_seq=92440 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=10750 freq=180001327 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26050 bytes_read=82121 bytes_retransmit=0 bytes_invalid=0 send_seq=4316 receive_seq=4316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999560 adj=49999134 sd_pos=575333 heater_bed: target=60 temp=59.8 pwm=0.158 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=31.0 sysload=0.79 cputime=493.990 memavail=694104 print_time=4559.494 buffer_time=2.091 print_stall=0 extruder: target=220 temp=219.6 pwm=0.682
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4557.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3679939 bytes_read=1895301 bytes_retransmit=0 bytes_invalid=0 send_seq=92657 receive_seq=92657 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=22930 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=26056 bytes_read=82150 bytes_retransmit=0 bytes_invalid=0 send_seq=4317 receive_seq=4317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999558 adj=49999157 sd_pos=580444 heater_bed: target=60 temp=59.8 pwm=0.147 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.9 sysload=0.79 cputime=494.614 memavail=693856 print_time=4562.257 buffer_time=3.652 print_stall=0 extruder: target=220 temp=219.6 pwm=0.627
Stats 4558.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3689998 bytes_read=1896557 bytes_retransmit=0 bytes_invalid=0 send_seq=92828 receive_seq=92828 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=13952 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=26062 bytes_read=82166 bytes_retransmit=0 bytes_invalid=0 send_seq=4318 receive_seq=4318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999556 adj=49999176 sd_pos=580444 heater_bed: target=60 temp=59.8 pwm=0.147 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=31.0 sysload=0.79 cputime=494.742 memavail=693752 print_time=4562.257 buffer_time=2.651 print_stall=0 extruder: target=220 temp=219.7 pwm=0.627
Stats 4559.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3698702 bytes_read=1897732 bytes_retransmit=0 bytes_invalid=0 send_seq=92974 receive_seq=92974 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=18085 freq=180001332 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=26068 bytes_read=82182 bytes_retransmit=0 bytes_invalid=0 send_seq=4319 receive_seq=4319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999562 adj=49999148 sd_pos=583082 heater_bed: target=60 temp=59.9 pwm=0.131 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=31.0 sysload=0.81 cputime=495.012 memavail=693856 print_time=4563.684 buffer_time=3.078 print_stall=0 extruder: target=220 temp=220.1 pwm=0.558
Stats 4560.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=3708350 bytes_read=1898957 bytes_retransmit=0 bytes_invalid=0 send_seq=93136 receive_seq=93136 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=9482 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=26074 bytes_read=82198 bytes_retransmit=0 bytes_invalid=0 send_seq=4320 receive_seq=4320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999560 adj=49999191 sd_pos=583082 heater_bed: target=60 temp=59.9 pwm=0.125 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=0.81 cputime=495.150 memavail=693856 print_time=4563.684 buffer_time=2.077 print_stall=0 extruder: target=220 temp=220.4 pwm=0.486
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4561.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3718680 bytes_read=1900244 bytes_retransmit=0 bytes_invalid=0 send_seq=93310 receive_seq=93310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=10624 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000021 bytes_write=26080 bytes_read=82214 bytes_retransmit=0 bytes_invalid=0 send_seq=4321 receive_seq=4321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999558 adj=49999184 sd_pos=585385 heater_bed: target=60 temp=59.9 pwm=0.180 raspberry_pi: temp=41.9 mcu_temp: temp=37.5 chamber: temp=30.9 sysload=0.81 cputime=495.454 memavail=693840 print_time=4564.829 buffer_time=2.221 print_stall=0 extruder: target=220 temp=220.5 pwm=0.486
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4562.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3727851 bytes_read=1901475 bytes_retransmit=0 bytes_invalid=0 send_seq=93465 receive_seq=93465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=10706 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26086 bytes_read=82243 bytes_retransmit=0 bytes_invalid=0 send_seq=4322 receive_seq=4322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999558 adj=49999176 sd_pos=587263 heater_bed: target=60 temp=59.9 pwm=0.180 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=31.0 sysload=0.81 cputime=496.095 memavail=693864 print_time=4565.971 buffer_time=2.363 print_stall=0 extruder: target=220 temp=220.7 pwm=0.486
Stats 4563.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3737894 bytes_read=1902725 bytes_retransmit=0 bytes_invalid=0 send_seq=93632 receive_seq=93632 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=7294 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26092 bytes_read=82259 bytes_retransmit=0 bytes_invalid=0 send_seq=4323 receive_seq=4323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999556 adj=49999161 sd_pos=589635 heater_bed: target=60 temp=59.9 pwm=0.127 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.81 cputime=496.299 memavail=693864 print_time=4566.882 buffer_time=2.273 print_stall=0 extruder: target=220 temp=220.4 pwm=0.561
Stats 4564.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3747319 bytes_read=1903906 bytes_retransmit=0 bytes_invalid=0 send_seq=93788 receive_seq=93788 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=4688 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26098 bytes_read=82275 bytes_retransmit=0 bytes_invalid=0 send_seq=4324 receive_seq=4324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999556 adj=49999150 sd_pos=592199 heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.90 cputime=496.523 memavail=693760 print_time=4567.937 buffer_time=2.328 print_stall=0 extruder: target=220 temp=220.2 pwm=0.561
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4565.4: gcodein=0  mcu: mcu_awake=0.026 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3753502 bytes_read=1904901 bytes_retransmit=0 bytes_invalid=0 send_seq=93898 receive_seq=93898 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=5726 freq=180001434 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26104 bytes_read=82291 bytes_retransmit=0 bytes_invalid=0 send_seq=4325 receive_seq=4325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999558 adj=49999123 sd_pos=594720 heater_bed: target=60 temp=59.8 pwm=0.179 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=0.90 cputime=496.865 memavail=693868 print_time=4568.908 buffer_time=2.297 print_stall=0 extruder: target=220 temp=220.0 pwm=0.643
Stats 4566.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3759901 bytes_read=1905872 bytes_retransmit=0 bytes_invalid=0 send_seq=94006 receive_seq=94006 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=5900 freq=180001428 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26110 bytes_read=82307 bytes_retransmit=0 bytes_invalid=0 send_seq=4326 receive_seq=4326 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999563 adj=49998847 sd_pos=597265 heater_bed: target=60 temp=59.9 pwm=0.116 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.90 cputime=497.075 memavail=693868 print_time=4569.877 buffer_time=2.266 print_stall=0 extruder: target=220 temp=219.8 pwm=0.643
Stats 4567.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3766899 bytes_read=1906889 bytes_retransmit=0 bytes_invalid=0 send_seq=94127 receive_seq=94127 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=6059 freq=180001419 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26116 bytes_read=82336 bytes_retransmit=0 bytes_invalid=0 send_seq=4327 receive_seq=4327 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999565 adj=49998977 sd_pos=600056 heater_bed: target=60 temp=59.8 pwm=0.253 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=0.90 cputime=497.347 memavail=694132 print_time=4570.956 buffer_time=2.344 print_stall=0 extruder: target=220 temp=219.8 pwm=0.643
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4568.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3774402 bytes_read=1907974 bytes_retransmit=0 bytes_invalid=0 send_seq=94255 receive_seq=94255 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=5186 freq=180001412 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26122 bytes_read=82352 bytes_retransmit=0 bytes_invalid=0 send_seq=4328 receive_seq=4328 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999063 sd_pos=602385 heater_bed: target=60 temp=59.8 pwm=0.173 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=0.90 cputime=497.715 memavail=694132 print_time=4571.837 buffer_time=2.224 print_stall=0 extruder: target=220 temp=219.8 pwm=0.592
Stats 4569.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3780572 bytes_read=1908924 bytes_retransmit=0 bytes_invalid=0 send_seq=94362 receive_seq=94362 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4982 freq=180001398 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26128 bytes_read=82368 bytes_retransmit=0 bytes_invalid=0 send_seq=4329 receive_seq=4329 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999123 sd_pos=604882 heater_bed: target=60 temp=59.9 pwm=0.173 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.9 sysload=0.91 cputime=497.921 memavail=694132 print_time=4572.728 buffer_time=2.114 print_stall=0 extruder: target=220 temp=220.1 pwm=0.515
Stats 4570.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3788113 bytes_read=1909981 bytes_retransmit=0 bytes_invalid=0 send_seq=94491 receive_seq=94491 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=4374 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26134 bytes_read=82384 bytes_retransmit=0 bytes_invalid=0 send_seq=4330 receive_seq=4330 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999234 sd_pos=607714 heater_bed: target=60 temp=60.0 pwm=0.073 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=0.91 cputime=498.136 memavail=693656 print_time=4573.735 buffer_time=2.121 print_stall=0 extruder: target=220 temp=220.3 pwm=0.515
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4571.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3794885 bytes_read=1911012 bytes_retransmit=0 bytes_invalid=0 send_seq=94606 receive_seq=94605 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4188 freq=180001399 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26140 bytes_read=82400 bytes_retransmit=0 bytes_invalid=0 send_seq=4331 receive_seq=4331 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999240 sd_pos=609594 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=0.91 cputime=498.468 memavail=693640 print_time=4574.643 buffer_time=2.028 print_stall=0 extruder: target=220 temp=220.4 pwm=0.515
Stats 4572.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3801519 bytes_read=1911992 bytes_retransmit=0 bytes_invalid=0 send_seq=94718 receive_seq=94718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4061 freq=180001394 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26146 bytes_read=82429 bytes_retransmit=0 bytes_invalid=0 send_seq=4332 receive_seq=4332 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999270 sd_pos=612346 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=31.0 sysload=0.91 cputime=498.694 memavail=693640 print_time=4575.825 buffer_time=2.209 print_stall=0 extruder: target=220 temp=220.4 pwm=0.515
Stats 4573.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3808848 bytes_read=1913034 bytes_retransmit=0 bytes_invalid=0 send_seq=94844 receive_seq=94844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=3224 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26152 bytes_read=82445 bytes_retransmit=0 bytes_invalid=0 send_seq=4333 receive_seq=4333 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999220 sd_pos=614819 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=0.91 cputime=498.918 memavail=693876 print_time=4576.846 buffer_time=2.230 print_stall=0 extruder: target=220 temp=220.3 pwm=0.542
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4574.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3814967 bytes_read=1914013 bytes_retransmit=0 bytes_invalid=0 send_seq=94948 receive_seq=94948 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=6024 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26158 bytes_read=82461 bytes_retransmit=0 bytes_invalid=0 send_seq=4334 receive_seq=4334 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999237 sd_pos=616909 heater_bed: target=60 temp=59.9 pwm=0.203 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=0.92 cputime=499.455 memavail=693892 print_time=4578.270 buffer_time=2.522 print_stall=0 extruder: target=220 temp=220.0 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4575.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3821333 bytes_read=1914979 bytes_retransmit=0 bytes_invalid=0 send_seq=95058 receive_seq=95058 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=8416 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26164 bytes_read=82477 bytes_retransmit=0 bytes_invalid=0 send_seq=4335 receive_seq=4335 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999252 sd_pos=618353 heater_bed: target=60 temp=59.8 pwm=0.225 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=0.92 cputime=499.904 memavail=693892 print_time=4579.588 buffer_time=2.839 print_stall=0 extruder: target=220 temp=219.9 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4576.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3828059 bytes_read=1916015 bytes_retransmit=0 bytes_invalid=0 send_seq=95171 receive_seq=95171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=8082 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26170 bytes_read=82493 bytes_retransmit=0 bytes_invalid=0 send_seq=4336 receive_seq=4336 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999234 sd_pos=619590 heater_bed: target=60 temp=59.9 pwm=0.098 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=31.0 sysload=0.92 cputime=500.249 memavail=694124 print_time=4580.332 buffer_time=2.534 print_stall=0 extruder: target=220 temp=219.7 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4577.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3833577 bytes_read=1916911 bytes_retransmit=0 bytes_invalid=0 send_seq=95270 receive_seq=95270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=12568 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26176 bytes_read=82522 bytes_retransmit=0 bytes_invalid=0 send_seq=4337 receive_seq=4337 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999231 sd_pos=621757 heater_bed: target=60 temp=59.8 pwm=0.189 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=0.92 cputime=500.727 memavail=694156 print_time=4581.540 buffer_time=2.741 print_stall=0 extruder: target=220 temp=219.7 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4578.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3842431 bytes_read=1918101 bytes_retransmit=0 bytes_invalid=0 send_seq=95419 receive_seq=95419 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=11834 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26182 bytes_read=82538 bytes_retransmit=0 bytes_invalid=0 send_seq=4338 receive_seq=4338 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999565 adj=49999241 sd_pos=623535 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=31.0 sysload=0.92 cputime=501.056 memavail=694156 print_time=4582.310 buffer_time=2.510 print_stall=0 extruder: target=220 temp=219.8 pwm=0.608
Stats 4579.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3850528 bytes_read=1919203 bytes_retransmit=0 bytes_invalid=0 send_seq=95557 receive_seq=95557 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=6624 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26188 bytes_read=82554 bytes_retransmit=0 bytes_invalid=0 send_seq=4339 receive_seq=4339 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999562 adj=49999225 sd_pos=623727 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=1.01 cputime=501.204 memavail=694012 print_time=4583.011 buffer_time=2.210 print_stall=0 extruder: target=220 temp=219.8 pwm=0.610
Stats 4580.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3859970 bytes_read=1920386 bytes_retransmit=0 bytes_invalid=0 send_seq=95716 receive_seq=95716 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=1403 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26194 bytes_read=82570 bytes_retransmit=0 bytes_invalid=0 send_seq=4340 receive_seq=4340 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999565 adj=49999217 sd_pos=624207 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=31.0 sysload=1.01 cputime=501.431 memavail=694160 print_time=4584.123 buffer_time=2.322 print_stall=0 extruder: target=220 temp=219.8 pwm=0.610
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4581.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3867041 bytes_read=1921463 bytes_retransmit=0 bytes_invalid=0 send_seq=95838 receive_seq=95838 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=8379 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26200 bytes_read=82586 bytes_retransmit=0 bytes_invalid=0 send_seq=4341 receive_seq=4341 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999237 sd_pos=627135 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=1.01 cputime=501.938 memavail=694160 print_time=4585.892 buffer_time=3.090 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
Stats 4582.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3869788 bytes_read=1922164 bytes_retransmit=0 bytes_invalid=0 send_seq=95893 receive_seq=95893 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=54 stalled_bytes=6131 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26206 bytes_read=82615 bytes_retransmit=0 bytes_invalid=0 send_seq=4342 receive_seq=4342 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999569 adj=49999282 sd_pos=627135 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.9 sysload=1.01 cputime=502.045 memavail=694108 print_time=4585.892 buffer_time=2.089 print_stall=0 extruder: target=220 temp=220.2 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4583.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3875016 bytes_read=1923031 bytes_retransmit=0 bytes_invalid=0 send_seq=95984 receive_seq=95984 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=14474 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26212 bytes_read=82631 bytes_retransmit=0 bytes_invalid=0 send_seq=4343 receive_seq=4343 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999282 sd_pos=629763 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.9 sysload=1.01 cputime=502.576 memavail=694172 print_time=4587.231 buffer_time=2.425 print_stall=0 extruder: target=220 temp=220.3 pwm=0.498
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4584.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3885710 bytes_read=1924361 bytes_retransmit=0 bytes_invalid=0 send_seq=96162 receive_seq=96161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=11268 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26218 bytes_read=82647 bytes_retransmit=0 bytes_invalid=0 send_seq=4344 receive_seq=4344 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999296 sd_pos=631144 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=1.17 cputime=503.070 memavail=694172 print_time=4588.226 buffer_time=2.419 print_stall=0 extruder: target=220 temp=220.3 pwm=0.498
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4585.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3896143 bytes_read=1925661 bytes_retransmit=0 bytes_invalid=0 send_seq=96338 receive_seq=96338 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=7008 freq=180001373 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26224 bytes_read=82663 bytes_retransmit=0 bytes_invalid=0 send_seq=4345 receive_seq=4345 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999204 sd_pos=632238 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.9 sysload=1.17 cputime=503.673 memavail=694112 print_time=4589.018 buffer_time=2.210 print_stall=0 extruder: target=220 temp=220.2 pwm=0.573
Stats 4586.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3905688 bytes_read=1926873 bytes_retransmit=0 bytes_invalid=0 send_seq=96497 receive_seq=96497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=2227 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26230 bytes_read=82679 bytes_retransmit=0 bytes_invalid=0 send_seq=4346 receive_seq=4346 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999147 sd_pos=633234 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=1.17 cputime=503.874 memavail=694884 print_time=4590.288 buffer_time=2.480 print_stall=0 extruder: target=220 temp=219.9 pwm=0.637
Stats 4587.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3910736 bytes_read=1927768 bytes_retransmit=0 bytes_invalid=0 send_seq=96587 receive_seq=96587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26236 bytes_read=82708 bytes_retransmit=0 bytes_invalid=0 send_seq=4347 receive_seq=4347 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999175 sd_pos=633799 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=41.9 mcu_temp: temp=38.1 chamber: temp=30.8 sysload=1.17 cputime=504.014 memavail=694940 print_time=4591.054 buffer_time=2.245 print_stall=0 extruder: target=220 temp=219.7 pwm=0.637
Stats 4588.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3915640 bytes_read=1928644 bytes_retransmit=0 bytes_invalid=0 send_seq=96679 receive_seq=96677 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=180001367 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26242 bytes_read=82724 bytes_retransmit=0 bytes_invalid=0 send_seq=4348 receive_seq=4348 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999215 sd_pos=634556 heater_bed: target=60 temp=59.8 pwm=0.208 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.8 sysload=1.17 cputime=504.226 memavail=694548 print_time=4592.516 buffer_time=2.690 print_stall=0 extruder: target=220 temp=219.6 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4589.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3919750 bytes_read=1929461 bytes_retransmit=0 bytes_invalid=0 send_seq=96758 receive_seq=96758 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=6625 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26248 bytes_read=82740 bytes_retransmit=0 bytes_invalid=0 send_seq=4349 receive_seq=4349 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999194 sd_pos=636951 heater_bed: target=60 temp=59.8 pwm=0.198 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.15 cputime=504.643 memavail=694692 print_time=4594.035 buffer_time=3.208 print_stall=0 extruder: target=220 temp=219.6 pwm=0.637
Stats 4590.6: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=3923064 bytes_read=1930226 bytes_retransmit=0 bytes_invalid=0 send_seq=96822 receive_seq=96822 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=3837 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26254 bytes_read=82756 bytes_retransmit=0 bytes_invalid=0 send_seq=4350 receive_seq=4350 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999578 adj=49999196 sd_pos=636951 heater_bed: target=60 temp=59.8 pwm=0.198 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=1.15 cputime=504.749 memavail=694692 print_time=4594.035 buffer_time=2.208 print_stall=0 extruder: target=220 temp=219.8 pwm=0.582
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4591.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3926473 bytes_read=1930983 bytes_retransmit=0 bytes_invalid=0 send_seq=96885 receive_seq=96885 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=8581 freq=180001368 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26260 bytes_read=82772 bytes_retransmit=0 bytes_invalid=0 send_seq=4351 receive_seq=4351 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999577 adj=49999237 sd_pos=638556 heater_bed: target=60 temp=59.8 pwm=0.198 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.8 sysload=1.15 cputime=505.176 memavail=694588 print_time=4595.169 buffer_time=2.342 print_stall=0 extruder: target=220 temp=219.9 pwm=0.582
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4592.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3935781 bytes_read=1932174 bytes_retransmit=0 bytes_invalid=0 send_seq=97040 receive_seq=97040 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=7892 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26266 bytes_read=82801 bytes_retransmit=0 bytes_invalid=0 send_seq=4352 receive_seq=4352 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999574 adj=49999240 sd_pos=640631 heater_bed: target=60 temp=59.8 pwm=0.147 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.15 cputime=505.562 memavail=694812 print_time=4596.226 buffer_time=2.398 print_stall=0 extruder: target=220 temp=220.1 pwm=0.530
Stats 4593.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3942961 bytes_read=1933223 bytes_retransmit=0 bytes_invalid=0 send_seq=97161 receive_seq=97161 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=6506 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26272 bytes_read=82817 bytes_retransmit=0 bytes_invalid=0 send_seq=4353 receive_seq=4353 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999231 sd_pos=642989 heater_bed: target=60 temp=59.8 pwm=0.223 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.15 cputime=505.755 memavail=694812 print_time=4597.029 buffer_time=2.200 print_stall=0 extruder: target=220 temp=220.1 pwm=0.530
Stats 4594.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3951753 bytes_read=1934370 bytes_retransmit=0 bytes_invalid=0 send_seq=97308 receive_seq=97308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=4253 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26278 bytes_read=82833 bytes_retransmit=0 bytes_invalid=0 send_seq=4354 receive_seq=4354 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999227 sd_pos=645351 heater_bed: target=60 temp=59.8 pwm=0.165 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.22 cputime=505.963 memavail=694580 print_time=4598.052 buffer_time=2.223 print_stall=0 extruder: target=220 temp=220.0 pwm=0.591
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4595.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=3958196 bytes_read=1935336 bytes_retransmit=0 bytes_invalid=0 send_seq=97418 receive_seq=97418 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=5083 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26284 bytes_read=82849 bytes_retransmit=0 bytes_invalid=0 send_seq=4355 receive_seq=4355 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999254 sd_pos=647898 heater_bed: target=60 temp=59.8 pwm=0.218 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=1.22 cputime=506.325 memavail=694580 print_time=4599.008 buffer_time=2.178 print_stall=0 extruder: target=220 temp=219.9 pwm=0.591
Stats 4596.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3964461 bytes_read=1936326 bytes_retransmit=0 bytes_invalid=0 send_seq=97524 receive_seq=97524 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=4901 freq=180001325 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=26290 bytes_read=82865 bytes_retransmit=0 bytes_invalid=0 send_seq=4356 receive_seq=4356 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999569 adj=49999267 sd_pos=650343 heater_bed: target=60 temp=59.8 pwm=0.162 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=1.22 cputime=506.585 memavail=694280 print_time=4599.859 buffer_time=2.028 print_stall=0 extruder: target=220 temp=219.8 pwm=0.591
Stats 4597.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3971907 bytes_read=1937373 bytes_retransmit=0 bytes_invalid=0 send_seq=97651 receive_seq=97651 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4040 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26296 bytes_read=82894 bytes_retransmit=0 bytes_invalid=0 send_seq=4357 receive_seq=4357 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999569 adj=49999262 sd_pos=652894 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=1.22 cputime=506.792 memavail=694056 print_time=4600.883 buffer_time=2.051 print_stall=0 extruder: target=220 temp=219.8 pwm=0.644
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4598.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3979261 bytes_read=1938419 bytes_retransmit=0 bytes_invalid=0 send_seq=97777 receive_seq=97777 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=4466 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26302 bytes_read=82910 bytes_retransmit=0 bytes_invalid=0 send_seq=4358 receive_seq=4358 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999251 sd_pos=655656 heater_bed: target=60 temp=59.8 pwm=0.232 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.22 cputime=507.135 memavail=694096 print_time=4601.925 buffer_time=2.092 print_stall=0 extruder: target=220 temp=219.8 pwm=0.644
Stats 4599.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3985518 bytes_read=1939398 bytes_retransmit=0 bytes_invalid=0 send_seq=97884 receive_seq=97884 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=6342 freq=180001321 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26308 bytes_read=82926 bytes_retransmit=0 bytes_invalid=0 send_seq=4359 receive_seq=4359 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999566 adj=49999241 sd_pos=659256 heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.20 cputime=507.389 memavail=694096 print_time=4603.185 buffer_time=2.351 print_stall=0 extruder: target=220 temp=219.8 pwm=0.592
Stats 4600.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=3993062 bytes_read=1940445 bytes_retransmit=0 bytes_invalid=0 send_seq=98011 receive_seq=98011 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5938 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26314 bytes_read=82942 bytes_retransmit=0 bytes_invalid=0 send_seq=4360 receive_seq=4360 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999564 adj=49999207 sd_pos=661916 heater_bed: target=60 temp=59.9 pwm=0.181 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.7 sysload=1.20 cputime=507.640 memavail=693992 print_time=4604.195 buffer_time=2.353 print_stall=0 extruder: target=220 temp=220.1 pwm=0.533
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4601.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=3999873 bytes_read=1941457 bytes_retransmit=0 bytes_invalid=0 send_seq=98127 receive_seq=98127 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=4955 freq=180001308 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26320 bytes_read=82958 bytes_retransmit=0 bytes_invalid=0 send_seq=4361 receive_seq=4361 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999193 sd_pos=663856 heater_bed: target=60 temp=59.9 pwm=0.181 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.20 cputime=507.971 memavail=694096 print_time=4604.970 buffer_time=2.128 print_stall=0 extruder: target=220 temp=220.2 pwm=0.533
Stats 4602.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4006505 bytes_read=1942461 bytes_retransmit=0 bytes_invalid=0 send_seq=98239 receive_seq=98239 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=3789 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26326 bytes_read=82987 bytes_retransmit=0 bytes_invalid=0 send_seq=4362 receive_seq=4362 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999573 adj=49999280 sd_pos=665948 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.20 cputime=508.196 memavail=694096 print_time=4605.932 buffer_time=2.089 print_stall=0 extruder: target=220 temp=220.4 pwm=0.533
Stats 4603.6: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4013937 bytes_read=1943504 bytes_retransmit=0 bytes_invalid=0 send_seq=98366 receive_seq=98366 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=2003 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26332 bytes_read=83002 bytes_retransmit=0 bytes_invalid=0 send_seq=4363 receive_seq=4363 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999351 sd_pos=668308 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=42.4 mcu_temp: temp=37.7 chamber: temp=30.6 sysload=1.20 cputime=508.408 memavail=694108 print_time=4606.867 buffer_time=2.023 print_stall=0 extruder: target=220 temp=220.3 pwm=0.533
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4604.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4020146 bytes_read=1944471 bytes_retransmit=0 bytes_invalid=0 send_seq=98471 receive_seq=98471 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4713 freq=180001300 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26338 bytes_read=83017 bytes_retransmit=0 bytes_invalid=0 send_seq=4364 receive_seq=4364 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999324 sd_pos=671260 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.6 sysload=1.19 cputime=509.053 memavail=694108 print_time=4608.092 buffer_time=2.169 print_stall=0 extruder: target=220 temp=220.2 pwm=0.585
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4605.7: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4026279 bytes_read=1945392 bytes_retransmit=0 bytes_invalid=0 send_seq=98575 receive_seq=98575 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=11008 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26344 bytes_read=83032 bytes_retransmit=0 bytes_invalid=0 send_seq=4365 receive_seq=4365 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999569 adj=49999262 sd_pos=674008 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.19 cputime=509.331 memavail=694108 print_time=4609.807 buffer_time=2.883 print_stall=0 extruder: target=220 temp=220.2 pwm=0.585
Stats 4606.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4033669 bytes_read=1946460 bytes_retransmit=0 bytes_invalid=0 send_seq=98700 receive_seq=98700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=16529 freq=180001297 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26350 bytes_read=83047 bytes_retransmit=0 bytes_invalid=0 send_seq=4366 receive_seq=4366 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999569 adj=49999220 sd_pos=676559 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.19 cputime=509.592 memavail=694120 print_time=4611.171 buffer_time=3.244 print_stall=0 extruder: target=220 temp=220.0 pwm=0.585
Stats 4607.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4040033 bytes_read=1947449 bytes_retransmit=0 bytes_invalid=0 send_seq=98809 receive_seq=98809 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=10946 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26356 bytes_read=83075 bytes_retransmit=0 bytes_invalid=0 send_seq=4367 receive_seq=4367 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999243 sd_pos=676559 heater_bed: target=60 temp=60.0 pwm=0.204 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=1.19 cputime=509.702 memavail=694364 print_time=4611.171 buffer_time=2.244 print_stall=0 extruder: target=220 temp=219.8 pwm=0.635
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4608.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4049483 bytes_read=1948650 bytes_retransmit=0 bytes_invalid=0 send_seq=98969 receive_seq=98969 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=14299 freq=180001297 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26362 bytes_read=83091 bytes_retransmit=0 bytes_invalid=0 send_seq=4368 receive_seq=4368 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999569 adj=49999242 sd_pos=679392 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.19 cputime=510.208 memavail=694112 print_time=4612.539 buffer_time=2.610 print_stall=0 extruder: target=220 temp=219.9 pwm=0.635
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4609.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4059648 bytes_read=1949921 bytes_retransmit=0 bytes_invalid=0 send_seq=99140 receive_seq=99140 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=8413 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26368 bytes_read=83107 bytes_retransmit=0 bytes_invalid=0 send_seq=4369 receive_seq=4369 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999228 sd_pos=680001 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.17 cputime=510.469 memavail=694068 print_time=4613.312 buffer_time=2.382 print_stall=0 extruder: target=220 temp=219.9 pwm=0.577
Stats 4610.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4069545 bytes_read=1951195 bytes_retransmit=0 bytes_invalid=0 send_seq=99306 receive_seq=99306 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=2530 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26374 bytes_read=83123 bytes_retransmit=0 bytes_invalid=0 send_seq=4370 receive_seq=4370 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999216 sd_pos=680488 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=1.17 cputime=510.645 memavail=694124 print_time=4614.267 buffer_time=2.337 print_stall=0 extruder: target=220 temp=220.1 pwm=0.521
Stats 4611.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4074821 bytes_read=1952073 bytes_retransmit=0 bytes_invalid=0 send_seq=99396 receive_seq=99396 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26380 bytes_read=83139 bytes_retransmit=0 bytes_invalid=0 send_seq=4371 receive_seq=4371 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999234 sd_pos=681053 heater_bed: target=60 temp=60.0 pwm=0.222 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.17 cputime=510.827 memavail=694124 print_time=4614.975 buffer_time=2.044 print_stall=0 extruder: target=220 temp=220.1 pwm=0.521
Stats 4612.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4079293 bytes_read=1952909 bytes_retransmit=0 bytes_invalid=0 send_seq=99480 receive_seq=99480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26386 bytes_read=83168 bytes_retransmit=0 bytes_invalid=0 send_seq=4372 receive_seq=4372 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999574 adj=49999267 sd_pos=681938 heater_bed: target=60 temp=59.9 pwm=0.222 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.8 sysload=1.17 cputime=511.008 memavail=693908 print_time=4616.249 buffer_time=2.318 print_stall=0 extruder: target=220 temp=220.2 pwm=0.521
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4613.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4084432 bytes_read=1953844 bytes_retransmit=0 bytes_invalid=0 send_seq=99576 receive_seq=99576 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=7329 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26392 bytes_read=83184 bytes_retransmit=0 bytes_invalid=0 send_seq=4373 receive_seq=4373 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999252 sd_pos=684822 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.17 cputime=511.832 memavail=694124 print_time=4618.000 buffer_time=3.068 print_stall=0 extruder: target=220 temp=220.2 pwm=0.521
Stats 4614.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4087390 bytes_read=1954521 bytes_retransmit=0 bytes_invalid=0 send_seq=99629 receive_seq=99629 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=4884 freq=180001315 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26398 bytes_read=83200 bytes_retransmit=0 bytes_invalid=0 send_seq=4374 receive_seq=4374 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999225 sd_pos=684822 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.16 cputime=511.924 memavail=694124 print_time=4618.000 buffer_time=2.067 print_stall=0 extruder: target=220 temp=220.2 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4615.7: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4091822 bytes_read=1955358 bytes_retransmit=0 bytes_invalid=0 send_seq=99711 receive_seq=99711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=13797 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26404 bytes_read=83216 bytes_retransmit=0 bytes_invalid=0 send_seq=4375 receive_seq=4375 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999244 sd_pos=687871 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.16 cputime=512.740 memavail=693304 print_time=4619.895 buffer_time=2.962 print_stall=0 extruder: target=220 temp=220.0 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4616.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4102399 bytes_read=1956708 bytes_retransmit=0 bytes_invalid=0 send_seq=99889 receive_seq=99889 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4320 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26410 bytes_read=83232 bytes_retransmit=0 bytes_invalid=0 send_seq=4376 receive_seq=4376 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999228 sd_pos=688120 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.16 cputime=512.962 memavail=693532 print_time=4619.895 buffer_time=1.927 print_stall=0 extruder: target=220 temp=219.7 pwm=0.634
Stats 4617.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4110004 bytes_read=1957744 bytes_retransmit=0 bytes_invalid=0 send_seq=100016 receive_seq=100016 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=1907 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26416 bytes_read=83261 bytes_retransmit=0 bytes_invalid=0 send_seq=4377 receive_seq=4377 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999241 sd_pos=688482 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.16 cputime=513.122 memavail=693636 print_time=4621.248 buffer_time=2.279 print_stall=0 extruder: target=220 temp=219.6 pwm=0.634
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4619.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4119836 bytes_read=1959081 bytes_retransmit=0 bytes_invalid=0 send_seq=100182 receive_seq=100180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=2955 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26422 bytes_read=83277 bytes_retransmit=0 bytes_invalid=0 send_seq=4378 receive_seq=4378 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999585 adj=49999233 sd_pos=690032 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.16 cputime=513.860 memavail=693636 print_time=4623.221 buffer_time=2.723 print_stall=0 extruder: target=220 temp=219.6 pwm=0.634
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4620.3: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4122626 bytes_read=1959827 bytes_retransmit=0 bytes_invalid=0 send_seq=100239 receive_seq=100238 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=9961 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26428 bytes_read=83293 bytes_retransmit=0 bytes_invalid=0 send_seq=4379 receive_seq=4379 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999234 sd_pos=692337 heater_bed: target=60 temp=60.0 pwm=0.207 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.22 cputime=514.144 memavail=693636 print_time=4624.355 buffer_time=2.856 print_stall=0 extruder: target=220 temp=219.7 pwm=0.599
Stats 4621.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4126141 bytes_read=1960619 bytes_retransmit=0 bytes_invalid=0 send_seq=100308 receive_seq=100308 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=10036 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26434 bytes_read=83309 bytes_retransmit=0 bytes_invalid=0 send_seq=4380 receive_seq=4380 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999586 adj=49999225 sd_pos=693584 heater_bed: target=60 temp=60.0 pwm=0.182 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.22 cputime=514.340 memavail=693548 print_time=4624.859 buffer_time=2.359 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
Stats 4622.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4136126 bytes_read=1961855 bytes_retransmit=0 bytes_invalid=0 send_seq=100475 receive_seq=100475 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=6406 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=26440 bytes_read=83338 bytes_retransmit=0 bytes_invalid=0 send_seq=4381 receive_seq=4381 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999281 sd_pos=695776 heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.22 cputime=514.555 memavail=693648 print_time=4625.802 buffer_time=2.302 print_stall=0 extruder: target=220 temp=220.0 pwm=0.545
Stats 4623.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4144062 bytes_read=1962970 bytes_retransmit=0 bytes_invalid=0 send_seq=100609 receive_seq=100609 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=5447 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=26446 bytes_read=83354 bytes_retransmit=0 bytes_invalid=0 send_seq=4382 receive_seq=4382 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999274 sd_pos=698506 heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.22 cputime=514.774 memavail=693648 print_time=4626.798 buffer_time=2.297 print_stall=0 extruder: target=220 temp=220.1 pwm=0.545
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4624.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4151057 bytes_read=1963975 bytes_retransmit=0 bytes_invalid=0 send_seq=100728 receive_seq=100727 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=6707 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=26452 bytes_read=83370 bytes_retransmit=0 bytes_invalid=0 send_seq=4383 receive_seq=4383 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999221 sd_pos=701195 heater_bed: target=60 temp=60.0 pwm=0.206 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.5 sysload=1.22 cputime=515.130 memavail=693220 print_time=4627.958 buffer_time=2.455 print_stall=0 extruder: target=220 temp=220.2 pwm=0.545
Stats 4625.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4157551 bytes_read=1964952 bytes_retransmit=0 bytes_invalid=0 send_seq=100840 receive_seq=100840 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5910 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=26458 bytes_read=83386 bytes_retransmit=0 bytes_invalid=0 send_seq=4384 receive_seq=4384 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999211 sd_pos=703366 heater_bed: target=60 temp=60.1 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.53 cputime=515.332 memavail=693396 print_time=4628.840 buffer_time=2.337 print_stall=0 extruder: target=220 temp=220.1 pwm=0.545
Stats 4626.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4164866 bytes_read=1966028 bytes_retransmit=0 bytes_invalid=0 send_seq=100963 receive_seq=100963 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=6051 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000018 bytes_write=26464 bytes_read=83402 bytes_retransmit=0 bytes_invalid=0 send_seq=4385 receive_seq=4385 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999573 adj=49999209 sd_pos=706126 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.53 cputime=515.555 memavail=693396 print_time=4629.940 buffer_time=2.435 print_stall=0 extruder: target=220 temp=220.0 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4627.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4171747 bytes_read=1967025 bytes_retransmit=0 bytes_invalid=0 send_seq=101080 receive_seq=101080 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=7105 freq=180001307 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=26470 bytes_read=83431 bytes_retransmit=0 bytes_invalid=0 send_seq=4386 receive_seq=4386 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999570 adj=49999186 sd_pos=708911 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.53 cputime=515.885 memavail=693864 print_time=4631.018 buffer_time=2.475 print_stall=0 extruder: target=220 temp=220.0 pwm=0.598
Stats 4628.3: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4178218 bytes_read=1967992 bytes_retransmit=0 bytes_invalid=0 send_seq=101191 receive_seq=101191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=6924 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=26476 bytes_read=83447 bytes_retransmit=0 bytes_invalid=0 send_seq=4387 receive_seq=4387 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999568 adj=49999161 sd_pos=711177 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.53 cputime=516.102 memavail=693912 print_time=4631.982 buffer_time=2.439 print_stall=0 extruder: target=220 temp=219.8 pwm=0.598
Stats 4629.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4185891 bytes_read=1969081 bytes_retransmit=0 bytes_invalid=0 send_seq=101321 receive_seq=101321 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=6920 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=26482 bytes_read=83463 bytes_retransmit=0 bytes_invalid=0 send_seq=4388 receive_seq=4388 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999156 sd_pos=714043 heater_bed: target=60 temp=60.1 pwm=0.201 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.48 cputime=516.332 memavail=693912 print_time=4633.094 buffer_time=2.526 print_stall=0 extruder: target=220 temp=219.8 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4630.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4193049 bytes_read=1970092 bytes_retransmit=0 bytes_invalid=0 send_seq=101443 receive_seq=101443 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=6022 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=26488 bytes_read=83479 bytes_retransmit=0 bytes_invalid=0 send_seq=4389 receive_seq=4389 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999566 adj=49999155 sd_pos=716315 heater_bed: target=60 temp=60.1 pwm=0.189 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.48 cputime=516.643 memavail=694100 print_time=4633.860 buffer_time=2.291 print_stall=0 extruder: target=220 temp=219.9 pwm=0.596
Stats 4631.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4199411 bytes_read=1971104 bytes_retransmit=0 bytes_invalid=0 send_seq=101552 receive_seq=101551 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=5496 freq=180001300 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=26494 bytes_read=83495 bytes_retransmit=0 bytes_invalid=0 send_seq=4390 receive_seq=4390 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999566 adj=49999125 sd_pos=718256 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.5 sysload=1.48 cputime=516.830 memavail=694168 print_time=4634.809 buffer_time=2.239 print_stall=0 extruder: target=220 temp=220.0 pwm=0.596
Stats 4632.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4207312 bytes_read=1972189 bytes_retransmit=0 bytes_invalid=0 send_seq=101685 receive_seq=101685 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=3099 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26500 bytes_read=83524 bytes_retransmit=0 bytes_invalid=0 send_seq=4391 receive_seq=4391 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999167 sd_pos=720595 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.48 cputime=517.092 memavail=694168 print_time=4635.761 buffer_time=2.191 print_stall=0 extruder: target=220 temp=220.1 pwm=0.544
Stats 4633.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4213696 bytes_read=1973135 bytes_retransmit=0 bytes_invalid=0 send_seq=101794 receive_seq=101794 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=3403 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26506 bytes_read=83540 bytes_retransmit=0 bytes_invalid=0 send_seq=4392 receive_seq=4392 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999567 adj=49999181 sd_pos=723009 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.4 sysload=1.48 cputime=517.341 memavail=694064 print_time=4636.683 buffer_time=2.113 print_stall=0 extruder: target=220 temp=220.2 pwm=0.544
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4634.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4219336 bytes_read=1974060 bytes_retransmit=0 bytes_invalid=0 send_seq=101891 receive_seq=101890 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4528 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26518 bytes_read=83572 bytes_retransmit=0 bytes_invalid=0 send_seq=4394 receive_seq=4394 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999210 sd_pos=724527 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.37 cputime=517.698 memavail=694176 print_time=4638.303 buffer_time=2.715 print_stall=0 extruder: target=220 temp=220.3 pwm=0.544
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4635.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4227800 bytes_read=1975261 bytes_retransmit=0 bytes_invalid=0 send_seq=102034 receive_seq=102034 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=8239 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26524 bytes_read=83588 bytes_retransmit=0 bytes_invalid=0 send_seq=4395 receive_seq=4395 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999171 sd_pos=727274 heater_bed: target=60 temp=60.2 pwm=0.126 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.37 cputime=518.355 memavail=694176 print_time=4639.869 buffer_time=3.103 print_stall=0 extruder: target=220 temp=220.2 pwm=0.544
Stats 4636.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4232182 bytes_read=1976088 bytes_retransmit=0 bytes_invalid=0 send_seq=102111 receive_seq=102111 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4493 freq=180001324 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=26530 bytes_read=83604 bytes_retransmit=0 bytes_invalid=0 send_seq=4396 receive_seq=4396 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999573 adj=49999196 sd_pos=727274 heater_bed: target=60 temp=60.1 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.37 cputime=518.440 memavail=694072 print_time=4639.869 buffer_time=2.103 print_stall=0 extruder: target=220 temp=220.1 pwm=0.555
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4637.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4236650 bytes_read=1976904 bytes_retransmit=0 bytes_invalid=0 send_seq=102194 receive_seq=102194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=8764 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26536 bytes_read=83633 bytes_retransmit=0 bytes_invalid=0 send_seq=4397 receive_seq=4397 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999193 sd_pos=729030 heater_bed: target=60 temp=60.2 pwm=0.149 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.37 cputime=518.779 memavail=694180 print_time=4640.850 buffer_time=2.083 print_stall=0 extruder: target=220 temp=220.1 pwm=0.609
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4638.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4249671 bytes_read=1978506 bytes_retransmit=0 bytes_invalid=0 send_seq=102412 receive_seq=102411 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=10697 freq=180001331 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26542 bytes_read=83649 bytes_retransmit=0 bytes_invalid=0 send_seq=4398 receive_seq=4398 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999167 sd_pos=732201 heater_bed: target=60 temp=60.2 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.37 cputime=519.974 memavail=694180 print_time=4642.589 buffer_time=2.446 print_stall=0 extruder: target=220 temp=219.8 pwm=0.609
Stats 4639.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4258707 bytes_read=1979683 bytes_retransmit=0 bytes_invalid=0 send_seq=102564 receive_seq=102564 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=5012 freq=180001329 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26548 bytes_read=83665 bytes_retransmit=0 bytes_invalid=0 send_seq=4399 receive_seq=4399 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999158 sd_pos=732479 heater_bed: target=60 temp=60.2 pwm=0.071 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.26 cputime=520.100 memavail=694068 print_time=4643.381 buffer_time=2.237 print_stall=0 extruder: target=220 temp=219.8 pwm=0.609
Stats 4640.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4267077 bytes_read=1980804 bytes_retransmit=0 bytes_invalid=0 send_seq=102705 receive_seq=102705 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=1025 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26554 bytes_read=83681 bytes_retransmit=0 bytes_invalid=0 send_seq=4400 receive_seq=4400 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999185 sd_pos=733018 heater_bed: target=60 temp=60.2 pwm=0.102 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.3 sysload=1.26 cputime=520.320 memavail=694192 print_time=4644.529 buffer_time=2.384 print_stall=0 extruder: target=220 temp=219.8 pwm=0.609
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4641.9: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4273069 bytes_read=1981774 bytes_retransmit=0 bytes_invalid=0 send_seq=102807 receive_seq=102807 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3005 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26560 bytes_read=83697 bytes_retransmit=0 bytes_invalid=0 send_seq=4401 receive_seq=4401 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999576 adj=49999222 sd_pos=734319 heater_bed: target=60 temp=60.1 pwm=0.228 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=1.26 cputime=520.883 memavail=694184 print_time=4645.815 buffer_time=2.669 print_stall=0 extruder: target=220 temp=220.0 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4643.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4277431 bytes_read=1982635 bytes_retransmit=0 bytes_invalid=0 send_seq=102889 receive_seq=102888 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=6609 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26566 bytes_read=83726 bytes_retransmit=0 bytes_invalid=0 send_seq=4402 receive_seq=4402 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999163 sd_pos=735651 heater_bed: target=60 temp=60.2 pwm=0.129 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.26 cputime=521.555 memavail=694184 print_time=4646.742 buffer_time=2.443 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
Stats 4644.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4282488 bytes_read=1983526 bytes_retransmit=0 bytes_invalid=0 send_seq=102982 receive_seq=102981 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=4982 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26572 bytes_read=83742 bytes_retransmit=0 bytes_invalid=0 send_seq=4403 receive_seq=4403 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999573 adj=49999162 sd_pos=736248 heater_bed: target=60 temp=60.2 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.3 sysload=1.26 cputime=521.674 memavail=694184 print_time=4647.337 buffer_time=2.037 print_stall=0 extruder: target=220 temp=220.3 pwm=0.525
Stats 4645.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4290371 bytes_read=1984592 bytes_retransmit=0 bytes_invalid=0 send_seq=103114 receive_seq=103114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1617 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26578 bytes_read=83758 bytes_retransmit=0 bytes_invalid=0 send_seq=4404 receive_seq=4404 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999156 sd_pos=737013 heater_bed: target=60 temp=60.2 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.16 cputime=521.875 memavail=694184 print_time=4648.481 buffer_time=2.182 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
Stats 4646.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4296856 bytes_read=1985597 bytes_retransmit=0 bytes_invalid=0 send_seq=103226 receive_seq=103226 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26584 bytes_read=83774 bytes_retransmit=0 bytes_invalid=0 send_seq=4405 receive_seq=4405 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999140 sd_pos=737985 heater_bed: target=60 temp=60.2 pwm=0.122 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.16 cputime=522.062 memavail=694200 print_time=4649.754 buffer_time=2.453 print_stall=0 extruder: target=220 temp=220.1 pwm=0.582
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4647.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4301452 bytes_read=1986484 bytes_retransmit=0 bytes_invalid=0 send_seq=103315 receive_seq=103315 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=5157 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=26590 bytes_read=83790 bytes_retransmit=0 bytes_invalid=0 send_seq=4406 receive_seq=4406 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999171 sd_pos=739933 heater_bed: target=60 temp=60.2 pwm=0.160 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.16 cputime=522.645 memavail=693948 print_time=4651.165 buffer_time=2.864 print_stall=0 extruder: target=220 temp=219.9 pwm=0.582
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4648.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4305733 bytes_read=1987343 bytes_retransmit=0 bytes_invalid=0 send_seq=103396 receive_seq=103395 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=6007 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26596 bytes_read=83819 bytes_retransmit=0 bytes_invalid=0 send_seq=4407 receive_seq=4407 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999571 adj=49999163 sd_pos=741039 heater_bed: target=60 temp=60.3 pwm=0.062 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.16 cputime=523.206 memavail=693852 print_time=4651.953 buffer_time=2.409 print_stall=0 extruder: target=220 temp=219.7 pwm=0.641
Stats 4649.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4311205 bytes_read=1988281 bytes_retransmit=0 bytes_invalid=0 send_seq=103495 receive_seq=103495 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=4974 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26602 bytes_read=83835 bytes_retransmit=0 bytes_invalid=0 send_seq=4408 receive_seq=4408 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999572 adj=49999162 sd_pos=742562 heater_bed: target=60 temp=60.3 pwm=0.105 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.3 sysload=1.16 cputime=523.377 memavail=693952 print_time=4652.566 buffer_time=2.020 print_stall=0 extruder: target=220 temp=219.6 pwm=0.641
Stats 4650.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4319924 bytes_read=1989460 bytes_retransmit=0 bytes_invalid=0 send_seq=103642 receive_seq=103642 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=6035 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26608 bytes_read=83851 bytes_retransmit=0 bytes_invalid=0 send_seq=4409 receive_seq=4409 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999575 adj=49999173 sd_pos=746658 heater_bed: target=60 temp=60.3 pwm=0.105 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.06 cputime=523.693 memavail=693952 print_time=4654.072 buffer_time=2.483 print_stall=0 extruder: target=220 temp=219.6 pwm=0.641
Stats 4651.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4326405 bytes_read=1990438 bytes_retransmit=0 bytes_invalid=0 send_seq=103755 receive_seq=103755 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4046 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26614 bytes_read=83867 bytes_retransmit=0 bytes_invalid=0 send_seq=4410 receive_seq=4410 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999184 sd_pos=747974 heater_bed: target=60 temp=60.2 pwm=0.161 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.06 cputime=523.855 memavail=693580 print_time=4654.639 buffer_time=2.050 print_stall=0 extruder: target=220 temp=219.6 pwm=0.641
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4652.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4332714 bytes_read=1991407 bytes_retransmit=0 bytes_invalid=0 send_seq=103863 receive_seq=103863 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=5107 freq=180001353 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26620 bytes_read=83883 bytes_retransmit=0 bytes_invalid=0 send_seq=4411 receive_seq=4411 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999254 sd_pos=750752 heater_bed: target=60 temp=60.2 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=1.06 cputime=524.242 memavail=693700 print_time=4655.677 buffer_time=2.087 print_stall=0 extruder: target=220 temp=219.8 pwm=0.645
Stats 4653.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4340144 bytes_read=1992477 bytes_retransmit=0 bytes_invalid=0 send_seq=103992 receive_seq=103992 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=4516 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26626 bytes_read=83912 bytes_retransmit=0 bytes_invalid=0 send_seq=4412 receive_seq=4412 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999244 sd_pos=753479 heater_bed: target=60 temp=60.2 pwm=0.131 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=1.06 cputime=524.466 memavail=693700 print_time=4656.785 buffer_time=2.194 print_stall=0 extruder: target=220 temp=220.0 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4654.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4347267 bytes_read=1993488 bytes_retransmit=0 bytes_invalid=0 send_seq=104114 receive_seq=104114 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=6348 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26632 bytes_read=83928 bytes_retransmit=0 bytes_invalid=0 send_seq=4413 receive_seq=4413 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999281 sd_pos=756639 heater_bed: target=60 temp=60.2 pwm=0.131 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=1.06 cputime=524.835 memavail=693552 print_time=4657.952 buffer_time=2.360 print_stall=0 extruder: target=220 temp=220.2 pwm=0.509
Stats 4655.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4353640 bytes_read=1994463 bytes_retransmit=0 bytes_invalid=0 send_seq=104221 receive_seq=104220 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=7256 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26638 bytes_read=83944 bytes_retransmit=0 bytes_invalid=0 send_seq=4414 receive_seq=4414 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999266 sd_pos=759389 heater_bed: target=60 temp=60.1 pwm=0.190 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.2 sysload=1.14 cputime=525.096 memavail=693552 print_time=4658.986 buffer_time=2.395 print_stall=0 extruder: target=220 temp=220.3 pwm=0.509
Stats 4656.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4361140 bytes_read=1995550 bytes_retransmit=0 bytes_invalid=0 send_seq=104349 receive_seq=104349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=7460 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26644 bytes_read=83960 bytes_retransmit=0 bytes_invalid=0 send_seq=4415 receive_seq=4415 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999240 sd_pos=762263 heater_bed: target=60 temp=60.1 pwm=0.105 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=1.14 cputime=525.323 memavail=693708 print_time=4660.186 buffer_time=2.589 print_stall=0 extruder: target=220 temp=220.4 pwm=0.509
Stats 4657.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4368489 bytes_read=1996571 bytes_retransmit=0 bytes_invalid=0 send_seq=104474 receive_seq=104473 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4219 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=26650 bytes_read=83976 bytes_retransmit=0 bytes_invalid=0 send_seq=4416 receive_seq=4416 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999227 sd_pos=763678 heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.14 cputime=525.514 memavail=693644 print_time=4660.674 buffer_time=2.074 print_stall=0 extruder: target=220 temp=220.2 pwm=0.578
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4658.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4374909 bytes_read=1997566 bytes_retransmit=0 bytes_invalid=0 send_seq=104583 receive_seq=104583 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=6226 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26656 bytes_read=84005 bytes_retransmit=0 bytes_invalid=0 send_seq=4417 receive_seq=4417 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999145 sd_pos=766762 heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.2 sysload=1.14 cputime=525.870 memavail=693716 print_time=4661.859 buffer_time=2.255 print_stall=0 extruder: target=220 temp=220.1 pwm=0.578
Stats 4659.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4382252 bytes_read=1998601 bytes_retransmit=0 bytes_invalid=0 send_seq=104707 receive_seq=104707 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=4148 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26662 bytes_read=84021 bytes_retransmit=0 bytes_invalid=0 send_seq=4418 receive_seq=4418 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999173 sd_pos=768742 heater_bed: target=60 temp=60.0 pwm=0.135 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.2 sysload=1.14 cputime=526.118 memavail=693716 print_time=4662.729 buffer_time=2.117 print_stall=0 extruder: target=220 temp=219.9 pwm=0.640
Stats 4660.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4389674 bytes_read=1999638 bytes_retransmit=0 bytes_invalid=0 send_seq=104832 receive_seq=104832 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=3956 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26668 bytes_read=84037 bytes_retransmit=0 bytes_invalid=0 send_seq=4419 receive_seq=4419 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999190 sd_pos=771496 heater_bed: target=60 temp=60.0 pwm=0.203 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.05 cputime=526.361 memavail=693772 print_time=4663.797 buffer_time=2.183 print_stall=0 extruder: target=220 temp=219.7 pwm=0.640
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4661.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4395959 bytes_read=2000648 bytes_retransmit=0 bytes_invalid=0 send_seq=104939 receive_seq=104939 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=4805 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26674 bytes_read=84053 bytes_retransmit=0 bytes_invalid=0 send_seq=4420 receive_seq=4420 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999203 sd_pos=773720 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.2 sysload=1.05 cputime=526.829 memavail=693852 print_time=4664.733 buffer_time=2.057 print_stall=0 extruder: target=220 temp=219.8 pwm=0.640
Stats 4662.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4402811 bytes_read=2001629 bytes_retransmit=0 bytes_invalid=0 send_seq=105055 receive_seq=105055 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=2862 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26680 bytes_read=84069 bytes_retransmit=0 bytes_invalid=0 send_seq=4421 receive_seq=4421 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999207 sd_pos=774595 heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.05 cputime=527.012 memavail=693852 print_time=4665.996 buffer_time=2.319 print_stall=0 extruder: target=220 temp=219.9 pwm=0.640
Stats 4663.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4409744 bytes_read=2002660 bytes_retransmit=0 bytes_invalid=0 send_seq=105170 receive_seq=105170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26686 bytes_read=84098 bytes_retransmit=0 bytes_invalid=0 send_seq=4422 receive_seq=4422 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999208 sd_pos=775185 heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.2 sysload=1.05 cputime=527.231 memavail=694056 print_time=4667.015 buffer_time=2.338 print_stall=0 extruder: target=220 temp=220.1 pwm=0.538
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4664.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4413986 bytes_read=2003480 bytes_retransmit=0 bytes_invalid=0 send_seq=105251 receive_seq=105251 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=7044 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26692 bytes_read=84114 bytes_retransmit=0 bytes_invalid=0 send_seq=4423 receive_seq=4423 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999209 sd_pos=777714 heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=0.96 cputime=527.872 memavail=694116 print_time=4668.625 buffer_time=2.947 print_stall=0 extruder: target=220 temp=220.3 pwm=0.538
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4665.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4418119 bytes_read=2004252 bytes_retransmit=0 bytes_invalid=0 send_seq=105323 receive_seq=105323 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=3498 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26698 bytes_read=84130 bytes_retransmit=0 bytes_invalid=0 send_seq=4424 receive_seq=4424 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999227 sd_pos=778239 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=0.96 cputime=528.056 memavail=694116 print_time=4668.625 buffer_time=1.903 print_stall=0 extruder: target=220 temp=220.5 pwm=0.475
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4666.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4423162 bytes_read=2005179 bytes_retransmit=0 bytes_invalid=0 send_seq=105414 receive_seq=105414 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=5864 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26704 bytes_read=84146 bytes_retransmit=0 bytes_invalid=0 send_seq=4425 receive_seq=4425 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999217 sd_pos=778956 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.96 cputime=528.310 memavail=694124 print_time=4670.180 buffer_time=2.457 print_stall=0 extruder: target=220 temp=220.5 pwm=0.475
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4667.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4432631 bytes_read=2006379 bytes_retransmit=0 bytes_invalid=0 send_seq=105571 receive_seq=105571 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=6864 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26710 bytes_read=84162 bytes_retransmit=0 bytes_invalid=0 send_seq=4426 receive_seq=4426 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999222 sd_pos=781002 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=0.96 cputime=528.792 memavail=694372 print_time=4671.448 buffer_time=2.724 print_stall=0 extruder: target=220 temp=220.2 pwm=0.590
Stats 4668.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4438014 bytes_read=2007246 bytes_retransmit=0 bytes_invalid=0 send_seq=105662 receive_seq=105662 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4336 freq=180001406 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26716 bytes_read=84191 bytes_retransmit=0 bytes_invalid=0 send_seq=4427 receive_seq=4427 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999160 sd_pos=781585 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=0.96 cputime=528.960 memavail=694372 print_time=4672.106 buffer_time=2.381 print_stall=0 extruder: target=220 temp=219.9 pwm=0.653
Stats 4669.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4442861 bytes_read=2008141 bytes_retransmit=0 bytes_invalid=0 send_seq=105752 receive_seq=105752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=2394 freq=180001403 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26722 bytes_read=84207 bytes_retransmit=0 bytes_invalid=0 send_seq=4428 receive_seq=4428 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999079 sd_pos=782135 heater_bed: target=60 temp=60.0 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.97 cputime=529.100 memavail=694336 print_time=4672.760 buffer_time=2.035 print_stall=0 extruder: target=220 temp=219.6 pwm=0.709
Stats 4670.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4449413 bytes_read=2009127 bytes_retransmit=0 bytes_invalid=0 send_seq=105864 receive_seq=105864 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001409 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26728 bytes_read=84223 bytes_retransmit=0 bytes_invalid=0 send_seq=4429 receive_seq=4429 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999109 sd_pos=782809 heater_bed: target=60 temp=60.0 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.4 sysload=0.97 cputime=529.271 memavail=694376 print_time=4673.867 buffer_time=2.141 print_stall=0 extruder: target=220 temp=219.4 pwm=0.709
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4671.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4455181 bytes_read=2010064 bytes_retransmit=0 bytes_invalid=0 send_seq=105968 receive_seq=105968 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=8414 freq=180001410 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26734 bytes_read=84239 bytes_retransmit=0 bytes_invalid=0 send_seq=4430 receive_seq=4430 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999582 adj=49999090 sd_pos=785939 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.97 cputime=529.665 memavail=694376 print_time=4675.679 buffer_time=2.952 print_stall=0 extruder: target=220 temp=219.4 pwm=0.709
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4672.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4459652 bytes_read=2010994 bytes_retransmit=0 bytes_invalid=0 send_seq=106049 receive_seq=106049 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=16698 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26740 bytes_read=84255 bytes_retransmit=0 bytes_invalid=0 send_seq=4431 receive_seq=4431 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999583 adj=49999127 sd_pos=788673 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.97 cputime=530.215 memavail=694376 print_time=4677.072 buffer_time=3.063 print_stall=0 extruder: target=220 temp=219.7 pwm=0.584
Stats 4673.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4467816 bytes_read=2012124 bytes_retransmit=0 bytes_invalid=0 send_seq=106193 receive_seq=106192 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=9490 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26746 bytes_read=84284 bytes_retransmit=0 bytes_invalid=0 send_seq=4432 receive_seq=4432 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999154 sd_pos=788673 heater_bed: target=60 temp=60.1 pwm=0.132 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.97 cputime=530.348 memavail=694376 print_time=4677.072 buffer_time=2.062 print_stall=0 extruder: target=220 temp=220.1 pwm=0.525
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4674.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4477967 bytes_read=2013370 bytes_retransmit=0 bytes_invalid=0 send_seq=106361 receive_seq=106361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=9896 freq=180001403 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26752 bytes_read=84300 bytes_retransmit=0 bytes_invalid=0 send_seq=4433 receive_seq=4433 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999155 sd_pos=790734 heater_bed: target=60 temp=60.1 pwm=0.069 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=0.97 cputime=530.805 memavail=694376 print_time=4678.208 buffer_time=2.197 print_stall=0 extruder: target=220 temp=220.3 pwm=0.525
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
Stats 4675.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4487595 bytes_read=2014612 bytes_retransmit=0 bytes_invalid=0 send_seq=106523 receive_seq=106523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=10636 freq=180001395 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26758 bytes_read=84316 bytes_retransmit=0 bytes_invalid=0 send_seq=4434 receive_seq=4434 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999140 sd_pos=792130 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.5 sysload=0.97 cputime=531.460 memavail=693776 print_time=4679.315 buffer_time=2.303 print_stall=0 extruder: target=220 temp=220.4 pwm=0.525
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4676.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4496782 bytes_read=2015805 bytes_retransmit=0 bytes_invalid=0 send_seq=106677 receive_seq=106677 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=13566 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26764 bytes_read=84332 bytes_retransmit=0 bytes_invalid=0 send_seq=4435 receive_seq=4435 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999159 sd_pos=794396 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=0.97 cputime=532.088 memavail=694064 print_time=4680.832 buffer_time=2.820 print_stall=0 extruder: target=220 temp=220.4 pwm=0.525
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4677.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4506781 bytes_read=2017056 bytes_retransmit=0 bytes_invalid=0 send_seq=106845 receive_seq=106844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=9512 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26770 bytes_read=84348 bytes_retransmit=0 bytes_invalid=0 send_seq=4436 receive_seq=4436 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999187 sd_pos=795766 heater_bed: target=60 temp=60.1 pwm=0.079 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.6 sysload=0.97 cputime=532.412 memavail=694140 print_time=4681.605 buffer_time=2.578 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
Stats 4678.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4514650 bytes_read=2018162 bytes_retransmit=0 bytes_invalid=0 send_seq=106977 receive_seq=106977 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=5694 freq=180001387 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=26776 bytes_read=84377 bytes_retransmit=0 bytes_invalid=0 send_seq=4437 receive_seq=4437 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999586 adj=49999209 sd_pos=797314 heater_bed: target=60 temp=60.0 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=532.565 memavail=694352 print_time=4682.179 buffer_time=2.151 print_stall=0 extruder: target=220 temp=220.1 pwm=0.577
Stats 4679.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4523523 bytes_read=2019322 bytes_retransmit=0 bytes_invalid=0 send_seq=107126 receive_seq=107126 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=3274 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=26782 bytes_read=84393 bytes_retransmit=0 bytes_invalid=0 send_seq=4438 receive_seq=4438 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999587 adj=49999278 sd_pos=800092 heater_bed: target=60 temp=60.0 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=532.798 memavail=694384 print_time=4683.162 buffer_time=2.133 print_stall=0 extruder: target=220 temp=219.9 pwm=0.636
Stats 4680.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4529559 bytes_read=2020268 bytes_retransmit=0 bytes_invalid=0 send_seq=107232 receive_seq=107232 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=5002 freq=180001373 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=26788 bytes_read=84409 bytes_retransmit=0 bytes_invalid=0 send_seq=4439 receive_seq=4439 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999586 adj=49999297 sd_pos=802861 heater_bed: target=60 temp=60.0 pwm=0.075 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=533.062 memavail=694384 print_time=4684.280 buffer_time=2.251 print_stall=0 extruder: target=220 temp=219.8 pwm=0.636
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4681.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4535880 bytes_read=2021268 bytes_retransmit=0 bytes_invalid=0 send_seq=107340 receive_seq=107340 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=6168 freq=180001386 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=26794 bytes_read=84425 bytes_retransmit=0 bytes_invalid=0 send_seq=4440 receive_seq=4440 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999296 sd_pos=805852 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=533.472 memavail=693792 print_time=4685.344 buffer_time=2.314 print_stall=0 extruder: target=220 temp=219.8 pwm=0.636
Stats 4682.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4542553 bytes_read=2022255 bytes_retransmit=0 bytes_invalid=0 send_seq=107455 receive_seq=107455 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=6586 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=26800 bytes_read=84441 bytes_retransmit=0 bytes_invalid=0 send_seq=4441 receive_seq=4441 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999581 adj=49999209 sd_pos=808958 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=533.703 memavail=693884 print_time=4686.454 buffer_time=2.424 print_stall=0 extruder: target=220 temp=219.8 pwm=0.636
Stats 4683.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4549968 bytes_read=2023301 bytes_retransmit=0 bytes_invalid=0 send_seq=107581 receive_seq=107581 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=3827 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26806 bytes_read=84470 bytes_retransmit=0 bytes_invalid=0 send_seq=4442 receive_seq=4442 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999214 sd_pos=810407 heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=0.97 cputime=533.893 memavail=693884 print_time=4687.041 buffer_time=2.005 print_stall=0 extruder: target=220 temp=220.2 pwm=0.544
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4684.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4556586 bytes_read=2024310 bytes_retransmit=0 bytes_invalid=0 send_seq=107694 receive_seq=107694 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4762 freq=180001366 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26812 bytes_read=84486 bytes_retransmit=0 bytes_invalid=0 send_seq=4443 receive_seq=4443 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999579 adj=49999194 sd_pos=813375 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=0.97 cputime=534.266 memavail=693832 print_time=4688.100 buffer_time=2.061 print_stall=0 extruder: target=220 temp=220.4 pwm=0.494
Stats 4685.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4563704 bytes_read=2025337 bytes_retransmit=0 bytes_invalid=0 send_seq=107817 receive_seq=107817 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=4499 freq=180001366 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26818 bytes_read=84502 bytes_retransmit=0 bytes_invalid=0 send_seq=4444 receive_seq=4444 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999580 adj=49999219 sd_pos=816272 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=31.0 sysload=0.97 cputime=534.478 memavail=693896 print_time=4689.143 buffer_time=2.102 print_stall=0 extruder: target=220 temp=220.6 pwm=0.494
Stats 4686.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4570998 bytes_read=2026384 bytes_retransmit=0 bytes_invalid=0 send_seq=107941 receive_seq=107940 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=5128 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26824 bytes_read=84518 bytes_retransmit=0 bytes_invalid=0 send_seq=4445 receive_seq=4445 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999584 adj=49999222 sd_pos=819261 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=534.713 memavail=693896 print_time=4690.224 buffer_time=2.179 print_stall=0 extruder: target=220 temp=220.5 pwm=0.494
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4687.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4577575 bytes_read=2027398 bytes_retransmit=0 bytes_invalid=0 send_seq=108054 receive_seq=108054 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=5454 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26830 bytes_read=84534 bytes_retransmit=0 bytes_invalid=0 send_seq=4446 receive_seq=4446 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999286 sd_pos=821772 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=0.97 cputime=535.038 memavail=693872 print_time=4691.248 buffer_time=2.203 print_stall=0 extruder: target=220 temp=220.3 pwm=0.570
Stats 4688.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4584886 bytes_read=2028430 bytes_retransmit=0 bytes_invalid=0 send_seq=108179 receive_seq=108178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3620 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26836 bytes_read=84562 bytes_retransmit=0 bytes_invalid=0 send_seq=4447 receive_seq=4447 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999280 sd_pos=824163 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=0.97 cputime=535.307 memavail=693896 print_time=4692.173 buffer_time=2.128 print_stall=0 extruder: target=220 temp=220.1 pwm=0.570
Stats 4689.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4591736 bytes_read=2029436 bytes_retransmit=0 bytes_invalid=0 send_seq=108296 receive_seq=108296 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=3526 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26842 bytes_read=84577 bytes_retransmit=0 bytes_invalid=0 send_seq=4448 receive_seq=4448 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999355 sd_pos=826821 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.8 sysload=1.06 cputime=535.511 memavail=693888 print_time=4693.164 buffer_time=2.118 print_stall=0 extruder: target=220 temp=219.9 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4690.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4597546 bytes_read=2030385 bytes_retransmit=0 bytes_invalid=0 send_seq=108397 receive_seq=108397 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=4471 freq=180001367 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26848 bytes_read=84592 bytes_retransmit=0 bytes_invalid=0 send_seq=4449 receive_seq=4449 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999315 sd_pos=829354 heater_bed: target=60 temp=59.9 pwm=0.209 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.06 cputime=535.862 memavail=693664 print_time=4694.383 buffer_time=2.335 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4692.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4608275 bytes_read=2031829 bytes_retransmit=0 bytes_invalid=0 send_seq=108579 receive_seq=108577 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=10134 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26854 bytes_read=84607 bytes_retransmit=0 bytes_invalid=0 send_seq=4450 receive_seq=4450 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999241 sd_pos=832693 heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.8 sysload=1.06 cputime=536.743 memavail=693900 print_time=4696.734 buffer_time=3.125 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
Stats 4693.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4612892 bytes_read=2032640 bytes_retransmit=0 bytes_invalid=0 send_seq=108659 receive_seq=108659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=6136 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26860 bytes_read=84635 bytes_retransmit=0 bytes_invalid=0 send_seq=4451 receive_seq=4451 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999244 sd_pos=832693 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=31.0 sysload=1.06 cputime=536.826 memavail=693880 print_time=4696.734 buffer_time=2.125 print_stall=0 extruder: target=220 temp=219.8 pwm=0.622
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4694.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4618133 bytes_read=2033581 bytes_retransmit=0 bytes_invalid=0 send_seq=108756 receive_seq=108756 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=7121 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26866 bytes_read=84650 bytes_retransmit=0 bytes_invalid=0 send_seq=4452 receive_seq=4452 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999224 sd_pos=833812 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=1.06 cputime=537.135 memavail=693904 print_time=4697.810 buffer_time=2.199 print_stall=0 extruder: target=220 temp=219.8 pwm=0.571
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4695.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4628328 bytes_read=2034841 bytes_retransmit=0 bytes_invalid=0 send_seq=108925 receive_seq=108925 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=7996 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26872 bytes_read=84666 bytes_retransmit=0 bytes_invalid=0 send_seq=4453 receive_seq=4453 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999219 sd_pos=835816 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=1.05 cputime=537.490 memavail=693904 print_time=4698.843 buffer_time=2.231 print_stall=0 extruder: target=220 temp=220.1 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4696.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4635513 bytes_read=2035942 bytes_retransmit=0 bytes_invalid=0 send_seq=109048 receive_seq=109048 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=18873 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26878 bytes_read=84682 bytes_retransmit=0 bytes_invalid=0 send_seq=4454 receive_seq=4454 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999224 sd_pos=839679 heater_bed: target=60 temp=60.1 pwm=0.124 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=1.05 cputime=537.974 memavail=693800 print_time=4701.470 buffer_time=3.709 print_stall=0 extruder: target=220 temp=220.2 pwm=0.520
Stats 4697.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4646320 bytes_read=2037253 bytes_retransmit=0 bytes_invalid=0 send_seq=109230 receive_seq=109230 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=9200 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26884 bytes_read=84698 bytes_retransmit=0 bytes_invalid=0 send_seq=4455 receive_seq=4455 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999223 sd_pos=839679 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=1.05 cputime=538.101 memavail=693912 print_time=4701.470 buffer_time=2.709 print_stall=0 extruder: target=220 temp=220.1 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4698.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4651520 bytes_read=2038188 bytes_retransmit=0 bytes_invalid=0 send_seq=109320 receive_seq=109318 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=15908 freq=180001415 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26896 bytes_read=84743 bytes_retransmit=0 bytes_invalid=0 send_seq=4457 receive_seq=4457 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999250 sd_pos=842464 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.9 sysload=1.05 cputime=538.869 memavail=693912 print_time=4702.709 buffer_time=2.670 print_stall=0 extruder: target=220 temp=219.9 pwm=0.638
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4699.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4661951 bytes_read=2039491 bytes_retransmit=0 bytes_invalid=0 send_seq=109494 receive_seq=109493 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=8436 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26902 bytes_read=84759 bytes_retransmit=0 bytes_invalid=0 send_seq=4458 receive_seq=4458 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999102 sd_pos=842645 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.8 sysload=1.05 cputime=539.088 memavail=693364 print_time=4703.158 buffer_time=2.119 print_stall=0 extruder: target=220 temp=219.7 pwm=0.638
Stats 4700.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4671851 bytes_read=2040718 bytes_retransmit=0 bytes_invalid=0 send_seq=109659 receive_seq=109659 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=2708 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26908 bytes_read=84775 bytes_retransmit=0 bytes_invalid=0 send_seq=4459 receive_seq=4459 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999111 sd_pos=843165 heater_bed: target=60 temp=60.2 pwm=0.051 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=30.8 sysload=1.05 cputime=539.268 memavail=693420 print_time=4704.224 buffer_time=2.184 print_stall=0 extruder: target=220 temp=219.7 pwm=0.638
Stats 4701.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4680467 bytes_read=2041899 bytes_retransmit=0 bytes_invalid=0 send_seq=109804 receive_seq=109803 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=137 freq=180001409 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26914 bytes_read=84791 bytes_retransmit=0 bytes_invalid=0 send_seq=4460 receive_seq=4460 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999131 sd_pos=844208 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.05 cputime=539.534 memavail=693420 print_time=4705.828 buffer_time=2.748 print_stall=0 extruder: target=220 temp=219.6 pwm=0.638
Stats 4702.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4681954 bytes_read=2042515 bytes_retransmit=0 bytes_invalid=0 send_seq=109841 receive_seq=109841 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=26920 bytes_read=84807 bytes_retransmit=0 bytes_invalid=0 send_seq=4461 receive_seq=4461 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999159 sd_pos=844344 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.7 sysload=1.05 cputime=539.635 memavail=693316 print_time=4706.151 buffer_time=2.070 print_stall=0 extruder: target=220 temp=219.7 pwm=0.603
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4703.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4687604 bytes_read=2043437 bytes_retransmit=0 bytes_invalid=0 send_seq=109943 receive_seq=109943 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001494 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26926 bytes_read=84836 bytes_retransmit=0 bytes_invalid=0 send_seq=4462 receive_seq=4462 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999151 sd_pos=845470 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.05 cputime=539.956 memavail=693424 print_time=4707.175 buffer_time=2.093 print_stall=0 extruder: target=220 temp=219.9 pwm=0.603
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4704.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4691375 bytes_read=2044253 bytes_retransmit=0 bytes_invalid=0 send_seq=110015 receive_seq=110015 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4999 freq=180001537 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26932 bytes_read=84852 bytes_retransmit=0 bytes_invalid=0 send_seq=4463 receive_seq=4463 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49998927 sd_pos=847280 heater_bed: target=60 temp=60.2 pwm=0.027 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=1.04 cputime=540.363 memavail=693424 print_time=4708.214 buffer_time=2.131 print_stall=0 extruder: target=220 temp=220.1 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4705.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4696749 bytes_read=2045128 bytes_retransmit=0 bytes_invalid=0 send_seq=110107 receive_seq=110107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=12168 freq=180001524 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26938 bytes_read=84868 bytes_retransmit=0 bytes_invalid=0 send_seq=4464 receive_seq=4464 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49998796 sd_pos=850008 heater_bed: target=60 temp=60.1 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.7 sysload=1.04 cputime=540.818 memavail=693592 print_time=4709.632 buffer_time=2.549 print_stall=0 extruder: target=220 temp=220.3 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4707.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4707133 bytes_read=2046474 bytes_retransmit=0 bytes_invalid=0 send_seq=110280 receive_seq=110279 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=13566 freq=180001514 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26944 bytes_read=84884 bytes_retransmit=0 bytes_invalid=0 send_seq=4465 receive_seq=4465 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49998951 sd_pos=852261 heater_bed: target=60 temp=60.2 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.6 sysload=1.04 cputime=541.597 memavail=694460 print_time=4710.764 buffer_time=2.524 print_stall=0 extruder: target=220 temp=220.3 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4708.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4716464 bytes_read=2047660 bytes_retransmit=0 bytes_invalid=0 send_seq=110437 receive_seq=110436 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=10362 freq=180001496 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=26950 bytes_read=84900 bytes_retransmit=0 bytes_invalid=0 send_seq=4466 receive_seq=4466 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999028 sd_pos=853077 heater_bed: target=60 temp=60.2 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.04 cputime=541.937 memavail=694476 print_time=4711.449 buffer_time=2.209 print_stall=0 extruder: target=220 temp=220.2 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4709.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4726661 bytes_read=2048931 bytes_retransmit=0 bytes_invalid=0 send_seq=110607 receive_seq=110607 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=9942 freq=180001485 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26956 bytes_read=84929 bytes_retransmit=0 bytes_invalid=0 send_seq=4467 receive_seq=4467 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999085 sd_pos=854523 heater_bed: target=60 temp=60.2 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.04 cputime=542.263 memavail=694636 print_time=4712.655 buffer_time=2.412 print_stall=0 extruder: target=220 temp=220.0 pwm=0.587
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4710.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4735758 bytes_read=2050135 bytes_retransmit=0 bytes_invalid=0 send_seq=110759 receive_seq=110759 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=6304 freq=180001478 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26962 bytes_read=84945 bytes_retransmit=0 bytes_invalid=0 send_seq=4468 receive_seq=4468 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999139 sd_pos=855754 heater_bed: target=60 temp=60.1 pwm=0.211 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.04 cputime=542.471 memavail=694700 print_time=4713.451 buffer_time=2.206 print_stall=0 extruder: target=220 temp=219.8 pwm=0.651
Stats 4711.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=4743628 bytes_read=2051206 bytes_retransmit=0 bytes_invalid=0 send_seq=110893 receive_seq=110893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=5678 freq=180001467 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26968 bytes_read=84961 bytes_retransmit=0 bytes_invalid=0 send_seq=4469 receive_seq=4469 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999176 sd_pos=858783 heater_bed: target=60 temp=60.1 pwm=0.193 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.7 sysload=1.04 cputime=542.782 memavail=694700 print_time=4714.573 buffer_time=2.327 print_stall=0 extruder: target=220 temp=219.8 pwm=0.651
Stats 4712.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4751185 bytes_read=2052318 bytes_retransmit=0 bytes_invalid=0 send_seq=111022 receive_seq=111021 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=5332 freq=180001456 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26974 bytes_read=84977 bytes_retransmit=0 bytes_invalid=0 send_seq=4470 receive_seq=4470 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999189 sd_pos=861891 heater_bed: target=60 temp=60.0 pwm=0.139 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.6 sysload=1.04 cputime=543.042 memavail=694684 print_time=4715.631 buffer_time=2.353 print_stall=0 extruder: target=220 temp=219.8 pwm=0.651
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4713.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4757518 bytes_read=2053273 bytes_retransmit=0 bytes_invalid=0 send_seq=111129 receive_seq=111129 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=4639 freq=180001446 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=26980 bytes_read=84993 bytes_retransmit=0 bytes_invalid=0 send_seq=4471 receive_seq=4471 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999236 sd_pos=863575 heater_bed: target=60 temp=60.1 pwm=0.061 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.7 sysload=1.04 cputime=543.332 memavail=694708 print_time=4716.355 buffer_time=2.076 print_stall=0 extruder: target=220 temp=220.0 pwm=0.595
Stats 4714.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4763992 bytes_read=2054224 bytes_retransmit=0 bytes_invalid=0 send_seq=111239 receive_seq=111239 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=5053 freq=180001439 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26986 bytes_read=85022 bytes_retransmit=0 bytes_invalid=0 send_seq=4472 receive_seq=4472 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999295 sd_pos=866587 heater_bed: target=60 temp=60.1 pwm=0.107 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.5 sysload=1.04 cputime=543.562 memavail=694708 print_time=4717.454 buffer_time=2.175 print_stall=0 extruder: target=220 temp=220.2 pwm=0.532
Stats 4715.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4771596 bytes_read=2055319 bytes_retransmit=0 bytes_invalid=0 send_seq=111369 receive_seq=111369 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=5658 freq=180001434 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26992 bytes_read=85038 bytes_retransmit=0 bytes_invalid=0 send_seq=4473 receive_seq=4473 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999275 sd_pos=869893 heater_bed: target=60 temp=60.2 pwm=0.050 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.5 sysload=1.04 cputime=543.811 memavail=694708 print_time=4718.653 buffer_time=2.374 print_stall=0 extruder: target=220 temp=220.4 pwm=0.532
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4716.1: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4778093 bytes_read=2056305 bytes_retransmit=0 bytes_invalid=0 send_seq=111481 receive_seq=111481 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=4417 freq=180001422 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=26998 bytes_read=85054 bytes_retransmit=0 bytes_invalid=0 send_seq=4474 receive_seq=4474 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999589 adj=49999248 sd_pos=871484 heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.6 sysload=1.04 cputime=544.160 memavail=694708 print_time=4719.285 buffer_time=2.005 print_stall=0 extruder: target=220 temp=220.5 pwm=0.454
Stats 4717.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4784749 bytes_read=2057292 bytes_retransmit=0 bytes_invalid=0 send_seq=111595 receive_seq=111595 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4969 freq=180001426 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27004 bytes_read=85070 bytes_retransmit=0 bytes_invalid=0 send_seq=4475 receive_seq=4475 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999588 adj=49999273 sd_pos=874395 heater_bed: target=60 temp=60.1 pwm=0.088 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=30.5 sysload=1.04 cputime=544.402 memavail=694876 print_time=4720.407 buffer_time=2.126 print_stall=0 extruder: target=220 temp=220.4 pwm=0.541
Stats 4718.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4792535 bytes_read=2058392 bytes_retransmit=0 bytes_invalid=0 send_seq=111726 receive_seq=111726 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=5936 freq=180001426 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27010 bytes_read=85086 bytes_retransmit=0 bytes_invalid=0 send_seq=4476 receive_seq=4476 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999223 sd_pos=877875 heater_bed: target=60 temp=60.1 pwm=0.081 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.04 cputime=544.669 memavail=694976 print_time=4721.699 buffer_time=2.418 print_stall=0 extruder: target=220 temp=220.3 pwm=0.541
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4719.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4799165 bytes_read=2059383 bytes_retransmit=0 bytes_invalid=0 send_seq=111839 receive_seq=111839 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=5850 freq=180001415 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27016 bytes_read=85115 bytes_retransmit=0 bytes_invalid=0 send_seq=4477 receive_seq=4477 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999245 sd_pos=880100 heater_bed: target=60 temp=60.1 pwm=0.119 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.04 cputime=545.023 memavail=694976 print_time=4722.536 buffer_time=2.253 print_stall=0 extruder: target=220 temp=219.9 pwm=0.599
Stats 4720.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4805665 bytes_read=2060339 bytes_retransmit=0 bytes_invalid=0 send_seq=111950 receive_seq=111950 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=4759 freq=180001406 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27022 bytes_read=85131 bytes_retransmit=0 bytes_invalid=0 send_seq=4478 receive_seq=4478 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999275 sd_pos=882188 heater_bed: target=60 temp=60.2 pwm=0.032 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.3 sysload=1.03 cputime=545.257 memavail=694976 print_time=4723.448 buffer_time=2.165 print_stall=0 extruder: target=220 temp=219.7 pwm=0.666
Stats 4721.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4813570 bytes_read=2061459 bytes_retransmit=0 bytes_invalid=0 send_seq=112085 receive_seq=112085 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=3466 freq=180001409 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27028 bytes_read=85147 bytes_retransmit=0 bytes_invalid=0 send_seq=4479 receive_seq=4479 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999295 sd_pos=885246 heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.03 cputime=545.486 memavail=694828 print_time=4724.490 buffer_time=2.206 print_stall=0 extruder: target=220 temp=219.6 pwm=0.666
Stats 4722.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=4819616 bytes_read=2062416 bytes_retransmit=0 bytes_invalid=0 send_seq=112188 receive_seq=112188 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=4704 freq=180001411 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27034 bytes_read=85163 bytes_retransmit=0 bytes_invalid=0 send_seq=4480 receive_seq=4480 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999284 sd_pos=887778 heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.4 sysload=1.03 cputime=545.733 memavail=694984 print_time=4725.522 buffer_time=2.238 print_stall=0 extruder: target=220 temp=219.7 pwm=0.604
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4723.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=4825786 bytes_read=2063347 bytes_retransmit=0 bytes_invalid=0 send_seq=112295 receive_seq=112295 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=7551 freq=180001411 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27040 bytes_read=85179 bytes_retransmit=0 bytes_invalid=0 send_seq=4481 receive_seq=4481 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999294 sd_pos=889930 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.4 sysload=1.03 cputime=546.046 memavail=694984 print_time=4726.503 buffer_time=2.218 print_stall=0 extruder: target=220 temp=219.8 pwm=0.604
Stats 4724.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=4832719 bytes_read=2064366 bytes_retransmit=0 bytes_invalid=0 send_seq=112413 receive_seq=112413 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=12364 freq=180001426 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27046 bytes_read=85208 bytes_retransmit=0 bytes_invalid=0 send_seq=4482 receive_seq=4482 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999348 sd_pos=891024 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.4 sysload=1.03 cputime=546.289 memavail=694612 print_time=4727.947 buffer_time=2.662 print_stall=0 extruder: target=220 temp=220.0 pwm=0.528
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4725.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=4842561 bytes_read=2065616 bytes_retransmit=0 bytes_invalid=0 send_seq=112580 receive_seq=112580 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=3577 freq=180001420 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27052 bytes_read=85224 bytes_retransmit=0 bytes_invalid=0 send_seq=4483 receive_seq=4483 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999249 sd_pos=892925 heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=41.9 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=1.03 cputime=546.825 memavail=694736 print_time=4727.947 buffer_time=1.606 print_stall=0 extruder: target=220 temp=220.3 pwm=0.475
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4726.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=4851497 bytes_read=2066793 bytes_retransmit=0 bytes_invalid=0 send_seq=112730 receive_seq=112730 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=8382 freq=180001410 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27058 bytes_read=85240 bytes_retransmit=0 bytes_invalid=0 send_seq=4484 receive_seq=4484 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999253 sd_pos=893497 heater_bed: target=60 temp=60.1 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.03 cputime=547.131 memavail=694736 print_time=4729.582 buffer_time=2.241 print_stall=0 extruder: target=220 temp=220.5 pwm=0.475
Stats 4727.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4859415 bytes_read=2067913 bytes_retransmit=0 bytes_invalid=0 send_seq=112863 receive_seq=112862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=5269 freq=180001410 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27064 bytes_read=85256 bytes_retransmit=0 bytes_invalid=0 send_seq=4485 receive_seq=4485 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999256 sd_pos=894635 heater_bed: target=60 temp=60.1 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=1.03 cputime=547.308 memavail=694340 print_time=4730.752 buffer_time=2.410 print_stall=0 extruder: target=220 temp=220.3 pwm=0.534
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4728.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4869418 bytes_read=2069154 bytes_retransmit=0 bytes_invalid=0 send_seq=113030 receive_seq=113030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=4574 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27070 bytes_read=85272 bytes_retransmit=0 bytes_invalid=0 send_seq=4486 receive_seq=4486 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999243 sd_pos=896549 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=1.03 cputime=547.680 memavail=694496 print_time=4732.216 buffer_time=2.873 print_stall=0 extruder: target=220 temp=220.1 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4729.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4873482 bytes_read=2069999 bytes_retransmit=0 bytes_invalid=0 send_seq=113105 receive_seq=113105 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=8493 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27076 bytes_read=85301 bytes_retransmit=0 bytes_invalid=0 send_seq=4487 receive_seq=4487 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999250 sd_pos=898439 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=1.03 cputime=548.153 memavail=694100 print_time=4733.018 buffer_time=2.500 print_stall=0 extruder: target=220 temp=219.8 pwm=0.650
Stats 4730.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4878632 bytes_read=2070871 bytes_retransmit=0 bytes_invalid=0 send_seq=113197 receive_seq=113197 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=5852 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27082 bytes_read=85317 bytes_retransmit=0 bytes_invalid=0 send_seq=4488 receive_seq=4488 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999286 sd_pos=898610 heater_bed: target=60 temp=60.1 pwm=0.061 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.2 sysload=1.03 cputime=548.295 memavail=694244 print_time=4733.543 buffer_time=2.024 print_stall=0 extruder: target=220 temp=219.6 pwm=0.650
Stats 4731.3: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4887712 bytes_read=2072076 bytes_retransmit=0 bytes_invalid=0 send_seq=113349 receive_seq=113349 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=2352 freq=180001385 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27088 bytes_read=85333 bytes_retransmit=0 bytes_invalid=0 send_seq=4489 receive_seq=4489 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999332 sd_pos=899385 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=1.03 cputime=548.513 memavail=694244 print_time=4735.032 buffer_time=2.512 print_stall=0 extruder: target=220 temp=219.4 pwm=0.650
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4732.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4890564 bytes_read=2072762 bytes_retransmit=0 bytes_invalid=0 send_seq=113400 receive_seq=113400 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001385 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27094 bytes_read=85349 bytes_retransmit=0 bytes_invalid=0 send_seq=4490 receive_seq=4490 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999298 sd_pos=901100 heater_bed: target=60 temp=60.1 pwm=0.080 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=1.03 cputime=549.119 memavail=694336 print_time=4735.032 buffer_time=1.503 print_stall=0 extruder: target=220 temp=219.6 pwm=0.650
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4733.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4898792 bytes_read=2073952 bytes_retransmit=0 bytes_invalid=0 send_seq=113544 receive_seq=113544 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=5766 freq=180001376 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27100 bytes_read=85365 bytes_retransmit=0 bytes_invalid=0 send_seq=4491 receive_seq=4491 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999384 sd_pos=902392 heater_bed: target=60 temp=60.0 pwm=0.133 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.03 cputime=549.566 memavail=694120 print_time=4736.923 buffer_time=2.176 print_stall=0 extruder: target=220 temp=219.8 pwm=0.576
Stats 4734.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4904365 bytes_read=2074864 bytes_retransmit=0 bytes_invalid=0 send_seq=113641 receive_seq=113641 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=5163 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27106 bytes_read=85394 bytes_retransmit=0 bytes_invalid=0 send_seq=4492 receive_seq=4492 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999353 sd_pos=903314 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.03 cputime=549.740 memavail=694120 print_time=4738.053 buffer_time=2.305 print_stall=0 extruder: target=220 temp=220.0 pwm=0.576
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4735.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4913523 bytes_read=2076083 bytes_retransmit=0 bytes_invalid=0 send_seq=113796 receive_seq=113796 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=9513 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27112 bytes_read=85410 bytes_retransmit=0 bytes_invalid=0 send_seq=4493 receive_seq=4493 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999332 sd_pos=906343 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=1.03 cputime=550.154 memavail=694016 print_time=4739.770 buffer_time=3.022 print_stall=0 extruder: target=220 temp=220.2 pwm=0.511
Stats 4736.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4918592 bytes_read=2076951 bytes_retransmit=0 bytes_invalid=0 send_seq=113884 receive_seq=113884 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=5124 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27118 bytes_read=85426 bytes_retransmit=0 bytes_invalid=0 send_seq=4494 receive_seq=4494 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999305 sd_pos=906343 heater_bed: target=60 temp=59.9 pwm=0.159 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=1.03 cputime=550.285 memavail=693128 print_time=4739.770 buffer_time=2.021 print_stall=0 extruder: target=220 temp=220.2 pwm=0.511
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4737.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4923789 bytes_read=2077868 bytes_retransmit=0 bytes_invalid=0 send_seq=113982 receive_seq=113982 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=9934 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27124 bytes_read=85442 bytes_retransmit=0 bytes_invalid=0 send_seq=4495 receive_seq=4495 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999340 sd_pos=908116 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.03 cputime=550.826 memavail=693132 print_time=4740.754 buffer_time=2.005 print_stall=0 extruder: target=220 temp=220.1 pwm=0.578
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4738.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4934171 bytes_read=2079177 bytes_retransmit=0 bytes_invalid=0 send_seq=114155 receive_seq=114155 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=14965 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27130 bytes_read=85458 bytes_retransmit=0 bytes_invalid=0 send_seq=4496 receive_seq=4496 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999345 sd_pos=911244 heater_bed: target=60 temp=59.8 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.03 cputime=551.203 memavail=693576 print_time=4742.884 buffer_time=3.134 print_stall=0 extruder: target=220 temp=219.9 pwm=0.631
Stats 4739.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4944516 bytes_read=2080438 bytes_retransmit=0 bytes_invalid=0 send_seq=114328 receive_seq=114327 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=5655 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27136 bytes_read=85487 bytes_retransmit=0 bytes_invalid=0 send_seq=4497 receive_seq=4497 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999300 sd_pos=911244 heater_bed: target=60 temp=59.8 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.03 cputime=551.359 memavail=693644 print_time=4742.884 buffer_time=2.133 print_stall=0 extruder: target=220 temp=219.6 pwm=0.705
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4740.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=4949473 bytes_read=2081315 bytes_retransmit=0 bytes_invalid=0 send_seq=114417 receive_seq=114417 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=15426 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27142 bytes_read=85503 bytes_retransmit=0 bytes_invalid=0 send_seq=4498 receive_seq=4498 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999291 sd_pos=914705 heater_bed: target=60 temp=59.8 pwm=0.172 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=1.02 cputime=552.000 memavail=693644 print_time=4744.485 buffer_time=2.734 print_stall=0 extruder: target=220 temp=219.5 pwm=0.705
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4741.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4959336 bytes_read=2082600 bytes_retransmit=0 bytes_invalid=0 send_seq=114582 receive_seq=114582 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=15246 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27148 bytes_read=85519 bytes_retransmit=0 bytes_invalid=0 send_seq=4499 receive_seq=4499 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999293 sd_pos=916874 heater_bed: target=60 temp=59.9 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=1.02 cputime=552.270 memavail=693028 print_time=4745.489 buffer_time=2.737 print_stall=0 extruder: target=220 temp=219.6 pwm=0.623
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4742.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4969062 bytes_read=2083816 bytes_retransmit=0 bytes_invalid=0 send_seq=114745 receive_seq=114745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=17423 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27154 bytes_read=85535 bytes_retransmit=0 bytes_invalid=0 send_seq=4500 receive_seq=4500 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999266 sd_pos=919296 heater_bed: target=60 temp=59.9 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.02 cputime=552.642 memavail=693144 print_time=4746.832 buffer_time=3.080 print_stall=0 extruder: target=220 temp=219.7 pwm=0.623
Stats 4743.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4978891 bytes_read=2085062 bytes_retransmit=0 bytes_invalid=0 send_seq=114911 receive_seq=114911 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=8673 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27160 bytes_read=85551 bytes_retransmit=0 bytes_invalid=0 send_seq=4501 receive_seq=4501 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999243 sd_pos=919296 heater_bed: target=60 temp=59.9 pwm=0.126 raspberry_pi: temp=41.9 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=1.02 cputime=552.781 memavail=693144 print_time=4746.832 buffer_time=2.080 print_stall=0 extruder: target=220 temp=220.0 pwm=0.535
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4744.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4988418 bytes_read=2086301 bytes_retransmit=0 bytes_invalid=0 send_seq=115071 receive_seq=115070 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=7009 freq=180001311 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27166 bytes_read=85580 bytes_retransmit=0 bytes_invalid=0 send_seq=4502 receive_seq=4502 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999276 sd_pos=921769 heater_bed: target=60 temp=59.9 pwm=0.126 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.02 cputime=553.078 memavail=693156 print_time=4748.027 buffer_time=2.266 print_stall=0 extruder: target=220 temp=220.4 pwm=0.475
Stats 4745.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=4997457 bytes_read=2087462 bytes_retransmit=0 bytes_invalid=0 send_seq=115222 receive_seq=115222 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=5848 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27172 bytes_read=85596 bytes_retransmit=0 bytes_invalid=0 send_seq=4503 receive_seq=4503 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999272 sd_pos=924985 heater_bed: target=60 temp=59.9 pwm=0.126 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=1.02 cputime=553.317 memavail=693156 print_time=4749.223 buffer_time=2.458 print_stall=0 extruder: target=220 temp=220.6 pwm=0.475
Stats 4746.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5004129 bytes_read=2088481 bytes_retransmit=0 bytes_invalid=0 send_seq=115337 receive_seq=115337 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=4065 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27178 bytes_read=85612 bytes_retransmit=0 bytes_invalid=0 send_seq=4504 receive_seq=4504 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999235 sd_pos=926676 heater_bed: target=60 temp=59.8 pwm=0.220 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.02 cputime=553.513 memavail=693156 print_time=4749.867 buffer_time=2.102 print_stall=0 extruder: target=220 temp=220.6 pwm=0.492
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4747.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5010573 bytes_read=2089457 bytes_retransmit=0 bytes_invalid=0 send_seq=115447 receive_seq=115447 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=4929 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27184 bytes_read=85628 bytes_retransmit=0 bytes_invalid=0 send_seq=4505 receive_seq=4505 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999231 sd_pos=929657 heater_bed: target=60 temp=59.8 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=1.02 cputime=553.856 memavail=693660 print_time=4750.881 buffer_time=2.116 print_stall=0 extruder: target=220 temp=220.5 pwm=0.548
Stats 4748.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5017296 bytes_read=2090423 bytes_retransmit=0 bytes_invalid=0 send_seq=115561 receive_seq=115561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=5375 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27190 bytes_read=85644 bytes_retransmit=0 bytes_invalid=0 send_seq=4506 receive_seq=4506 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999270 sd_pos=932856 heater_bed: target=60 temp=59.8 pwm=0.199 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=1.02 cputime=554.086 memavail=693660 print_time=4751.995 buffer_time=2.229 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
Stats 4749.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5024893 bytes_read=2091518 bytes_retransmit=0 bytes_invalid=0 send_seq=115691 receive_seq=115691 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=6835 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27196 bytes_read=85673 bytes_retransmit=0 bytes_invalid=0 send_seq=4507 receive_seq=4507 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999154 sd_pos=935886 heater_bed: target=60 temp=59.9 pwm=0.102 raspberry_pi: temp=41.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.02 cputime=554.356 memavail=693660 print_time=4753.282 buffer_time=2.490 print_stall=0 extruder: target=220 temp=219.9 pwm=0.607
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4750.6: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5031440 bytes_read=2092499 bytes_retransmit=0 bytes_invalid=0 send_seq=115803 receive_seq=115802 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4962 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27202 bytes_read=85689 bytes_retransmit=0 bytes_invalid=0 send_seq=4508 receive_seq=4508 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999213 sd_pos=937548 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.94 cputime=554.635 memavail=693660 print_time=4753.863 buffer_time=2.071 print_stall=0 extruder: target=220 temp=219.7 pwm=0.668
Stats 4751.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5038228 bytes_read=2093501 bytes_retransmit=0 bytes_invalid=0 send_seq=115919 receive_seq=115919 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=5729 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27208 bytes_read=85705 bytes_retransmit=0 bytes_invalid=0 send_seq=4509 receive_seq=4509 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999210 sd_pos=940963 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.94 cputime=554.864 memavail=693680 print_time=4755.051 buffer_time=2.258 print_stall=0 extruder: target=220 temp=219.7 pwm=0.611
Stats 4752.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5045830 bytes_read=2094586 bytes_retransmit=0 bytes_invalid=0 send_seq=116047 receive_seq=116047 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=6506 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27214 bytes_read=85721 bytes_retransmit=0 bytes_invalid=0 send_seq=4510 receive_seq=4510 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999217 sd_pos=944153 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.94 cputime=555.097 memavail=693680 print_time=4756.237 buffer_time=2.443 print_stall=0 extruder: target=220 temp=219.8 pwm=0.611
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4753.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5052492 bytes_read=2095576 bytes_retransmit=0 bytes_invalid=0 send_seq=116162 receive_seq=116162 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=5522 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27220 bytes_read=85737 bytes_retransmit=0 bytes_invalid=0 send_seq=4511 receive_seq=4511 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999204 sd_pos=945979 heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.94 cputime=555.435 memavail=693912 print_time=4756.968 buffer_time=2.174 print_stall=0 extruder: target=220 temp=220.0 pwm=0.520
Stats 4754.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5059450 bytes_read=2096583 bytes_retransmit=0 bytes_invalid=0 send_seq=116281 receive_seq=116281 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4333 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27226 bytes_read=85766 bytes_retransmit=0 bytes_invalid=0 send_seq=4512 receive_seq=4512 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999238 sd_pos=948497 heater_bed: target=60 temp=59.9 pwm=0.111 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.94 cputime=555.670 memavail=693936 print_time=4757.967 buffer_time=2.172 print_stall=0 extruder: target=220 temp=220.3 pwm=0.520
Stats 4755.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5066941 bytes_read=2097673 bytes_retransmit=0 bytes_invalid=0 send_seq=116410 receive_seq=116410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=3109 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27232 bytes_read=85782 bytes_retransmit=0 bytes_invalid=0 send_seq=4513 receive_seq=4513 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999222 sd_pos=951670 heater_bed: target=60 temp=59.9 pwm=0.111 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=30.1 sysload=0.94 cputime=555.896 memavail=693936 print_time=4758.965 buffer_time=2.169 print_stall=0 extruder: target=220 temp=220.5 pwm=0.469
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4756.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5072506 bytes_read=2098584 bytes_retransmit=0 bytes_invalid=0 send_seq=116506 receive_seq=116506 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=5329 freq=180001327 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27238 bytes_read=85798 bytes_retransmit=0 bytes_invalid=0 send_seq=4514 receive_seq=4514 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999221 sd_pos=954282 heater_bed: target=60 temp=59.9 pwm=0.187 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.94 cputime=556.214 memavail=693832 print_time=4760.040 buffer_time=2.243 print_stall=0 extruder: target=220 temp=220.4 pwm=0.522
Stats 4757.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5078752 bytes_read=2099531 bytes_retransmit=0 bytes_invalid=0 send_seq=116613 receive_seq=116613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4409 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27244 bytes_read=85814 bytes_retransmit=0 bytes_invalid=0 send_seq=4515 receive_seq=4515 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999591 adj=49999199 sd_pos=955237 heater_bed: target=60 temp=59.9 pwm=0.187 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.94 cputime=556.445 memavail=693432 print_time=4761.282 buffer_time=2.484 print_stall=0 extruder: target=220 temp=220.2 pwm=0.522
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4758.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5086535 bytes_read=2100496 bytes_retransmit=0 bytes_invalid=0 send_seq=116743 receive_seq=116743 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=5776 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27250 bytes_read=85830 bytes_retransmit=0 bytes_invalid=0 send_seq=4516 receive_seq=4516 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999138 sd_pos=957313 heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.94 cputime=557.209 memavail=693432 print_time=4762.477 buffer_time=2.631 print_stall=0 extruder: target=220 temp=219.9 pwm=0.573
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4759.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5091148 bytes_read=2101313 bytes_retransmit=0 bytes_invalid=0 send_seq=116824 receive_seq=116824 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3418 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27256 bytes_read=85859 bytes_retransmit=0 bytes_invalid=0 send_seq=4517 receive_seq=4517 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999182 sd_pos=957597 heater_bed: target=60 temp=59.9 pwm=0.218 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.87 cputime=557.445 memavail=693628 print_time=4763.020 buffer_time=2.174 print_stall=0 extruder: target=220 temp=219.8 pwm=0.632
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4760.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5097170 bytes_read=2102259 bytes_retransmit=0 bytes_invalid=0 send_seq=116931 receive_seq=116930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=9318 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27262 bytes_read=85875 bytes_retransmit=0 bytes_invalid=0 send_seq=4518 receive_seq=4518 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999076 sd_pos=960096 heater_bed: target=60 temp=59.9 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.87 cputime=557.915 memavail=693688 print_time=4764.311 buffer_time=2.464 print_stall=0 extruder: target=220 temp=219.6 pwm=0.632
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4761.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5103996 bytes_read=2103320 bytes_retransmit=0 bytes_invalid=0 send_seq=117048 receive_seq=117048 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=8073 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27268 bytes_read=85891 bytes_retransmit=0 bytes_invalid=0 send_seq=4519 receive_seq=4519 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999108 sd_pos=960887 heater_bed: target=60 temp=59.9 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.87 cputime=558.393 memavail=693688 print_time=4764.971 buffer_time=2.123 print_stall=0 extruder: target=220 temp=219.6 pwm=0.632
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4762.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5113128 bytes_read=2104516 bytes_retransmit=0 bytes_invalid=0 send_seq=117207 receive_seq=117207 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=7498 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27274 bytes_read=85907 bytes_retransmit=0 bytes_invalid=0 send_seq=4520 receive_seq=4520 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999142 sd_pos=961564 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.87 cputime=558.733 memavail=693308 print_time=4766.091 buffer_time=2.243 print_stall=0 extruder: target=220 temp=219.6 pwm=0.632
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4763.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5121655 bytes_read=2105657 bytes_retransmit=0 bytes_invalid=0 send_seq=117352 receive_seq=117352 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=9688 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=27280 bytes_read=85923 bytes_retransmit=0 bytes_invalid=0 send_seq=4521 receive_seq=4521 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999192 sd_pos=963549 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.87 cputime=559.418 memavail=693448 print_time=4767.213 buffer_time=2.361 print_stall=0 extruder: target=220 temp=219.8 pwm=0.577
Stats 4764.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5129078 bytes_read=2106737 bytes_retransmit=0 bytes_invalid=0 send_seq=117477 receive_seq=117477 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=6377 freq=180001373 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27286 bytes_read=85952 bytes_retransmit=0 bytes_invalid=0 send_seq=4522 receive_seq=4522 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999186 sd_pos=964441 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.80 cputime=559.600 memavail=693448 print_time=4768.037 buffer_time=2.183 print_stall=0 extruder: target=220 temp=219.9 pwm=0.577
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4765.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5138613 bytes_read=2107938 bytes_retransmit=0 bytes_invalid=0 send_seq=117637 receive_seq=117637 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=16353 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27292 bytes_read=85968 bytes_retransmit=0 bytes_invalid=0 send_seq=4523 receive_seq=4523 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999175 sd_pos=968668 heater_bed: target=60 temp=59.9 pwm=0.228 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.80 cputime=560.009 memavail=693240 print_time=4770.724 buffer_time=3.869 print_stall=0 extruder: target=220 temp=220.0 pwm=0.577
Stats 4766.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5144357 bytes_read=2108866 bytes_retransmit=0 bytes_invalid=0 send_seq=117734 receive_seq=117734 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=11347 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27298 bytes_read=85984 bytes_retransmit=0 bytes_invalid=0 send_seq=4524 receive_seq=4524 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999216 sd_pos=968668 heater_bed: target=60 temp=59.8 pwm=0.303 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.80 cputime=560.165 memavail=693460 print_time=4770.724 buffer_time=2.869 print_stall=0 extruder: target=220 temp=220.1 pwm=0.577
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4767.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5149081 bytes_read=2109746 bytes_retransmit=0 bytes_invalid=0 send_seq=117817 receive_seq=117816 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=11561 freq=180001377 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27304 bytes_read=86000 bytes_retransmit=0 bytes_invalid=0 send_seq=4525 receive_seq=4525 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999216 sd_pos=969698 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.80 cputime=560.708 memavail=693460 print_time=4771.205 buffer_time=2.163 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4768.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5159693 bytes_read=2111080 bytes_retransmit=0 bytes_invalid=0 send_seq=117994 receive_seq=117994 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=15946 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27310 bytes_read=86016 bytes_retransmit=0 bytes_invalid=0 send_seq=4526 receive_seq=4526 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999200 sd_pos=972812 heater_bed: target=60 temp=59.7 pwm=0.316 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.80 cputime=561.328 memavail=693048 print_time=4773.157 buffer_time=3.116 print_stall=0 extruder: target=220 temp=220.1 pwm=0.551
Stats 4769.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5170293 bytes_read=2112361 bytes_retransmit=0 bytes_invalid=0 send_seq=118170 receive_seq=118170 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=6445 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27316 bytes_read=86045 bytes_retransmit=0 bytes_invalid=0 send_seq=4527 receive_seq=4527 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999202 sd_pos=972812 heater_bed: target=60 temp=59.8 pwm=0.138 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.73 cputime=561.435 memavail=693212 print_time=4773.157 buffer_time=2.115 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
Stats 4770.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5175345 bytes_read=2113222 bytes_retransmit=0 bytes_invalid=0 send_seq=118258 receive_seq=118258 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=6219 freq=180001374 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27322 bytes_read=86061 bytes_retransmit=0 bytes_invalid=0 send_seq=4528 receive_seq=4528 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999208 sd_pos=973350 heater_bed: target=60 temp=59.8 pwm=0.138 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.73 cputime=561.646 memavail=693212 print_time=4774.313 buffer_time=2.269 print_stall=0 extruder: target=220 temp=219.8 pwm=0.614
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4771.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5187027 bytes_read=2114632 bytes_retransmit=0 bytes_invalid=0 send_seq=118453 receive_seq=118451 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=6140 freq=180001371 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27328 bytes_read=86077 bytes_retransmit=0 bytes_invalid=0 send_seq=4529 receive_seq=4529 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999218 sd_pos=975787 heater_bed: target=60 temp=59.8 pwm=0.193 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.73 cputime=562.238 memavail=693380 print_time=4776.126 buffer_time=3.018 print_stall=0 extruder: target=220 temp=219.6 pwm=0.687
Stats 4772.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5191003 bytes_read=2115393 bytes_retransmit=0 bytes_invalid=0 send_seq=118523 receive_seq=118523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=2660 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27334 bytes_read=86093 bytes_retransmit=0 bytes_invalid=0 send_seq=4530 receive_seq=4530 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999240 sd_pos=975787 heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.73 cputime=562.334 memavail=693476 print_time=4776.126 buffer_time=2.017 print_stall=0 extruder: target=220 temp=219.7 pwm=0.630
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4773.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5194754 bytes_read=2116209 bytes_retransmit=0 bytes_invalid=0 send_seq=118595 receive_seq=118595 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=11431 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27340 bytes_read=86109 bytes_retransmit=0 bytes_invalid=0 send_seq=4531 receive_seq=4531 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999229 sd_pos=978785 heater_bed: target=60 temp=59.9 pwm=0.095 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.73 cputime=562.826 memavail=693476 print_time=4777.564 buffer_time=2.454 print_stall=0 extruder: target=220 temp=219.8 pwm=0.630
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4774.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5203619 bytes_read=2117385 bytes_retransmit=0 bytes_invalid=0 send_seq=118745 receive_seq=118745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=17878 freq=180001417 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27346 bytes_read=86138 bytes_retransmit=0 bytes_invalid=0 send_seq=4532 receive_seq=4532 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999226 sd_pos=981503 heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.68 cputime=563.101 memavail=693324 print_time=4778.993 buffer_time=2.882 print_stall=0 extruder: target=220 temp=219.8 pwm=0.630
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4776.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5214049 bytes_read=2118719 bytes_retransmit=0 bytes_invalid=0 send_seq=118920 receive_seq=118920 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=8585 freq=180001413 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27352 bytes_read=86153 bytes_retransmit=0 bytes_invalid=0 send_seq=4533 receive_seq=4533 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999094 sd_pos=983029 heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.68 cputime=563.562 memavail=693476 print_time=4778.993 buffer_time=1.759 print_stall=0 extruder: target=220 temp=220.0 pwm=0.576
Stats 4777.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5225069 bytes_read=2120056 bytes_retransmit=0 bytes_invalid=0 send_seq=119104 receive_seq=119104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=12964 freq=180001417 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27358 bytes_read=86168 bytes_retransmit=0 bytes_invalid=0 send_seq=4534 receive_seq=4534 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999130 sd_pos=984381 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.68 cputime=563.750 memavail=693432 print_time=4780.728 buffer_time=2.493 print_stall=0 extruder: target=220 temp=220.2 pwm=0.492
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4778.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5234861 bytes_read=2121292 bytes_retransmit=0 bytes_invalid=0 send_seq=119268 receive_seq=119268 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=40 stalled_bytes=10656 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27364 bytes_read=86183 bytes_retransmit=0 bytes_invalid=0 send_seq=4535 receive_seq=4535 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999098 sd_pos=986159 heater_bed: target=60 temp=60.0 pwm=0.167 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.68 cputime=564.063 memavail=693520 print_time=4781.642 buffer_time=2.406 print_stall=0 extruder: target=220 temp=220.3 pwm=0.492
Stats 4779.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5244372 bytes_read=2122541 bytes_retransmit=0 bytes_invalid=0 send_seq=119429 receive_seq=119429 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=8125 freq=180001399 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27370 bytes_read=86198 bytes_retransmit=0 bytes_invalid=0 send_seq=4536 receive_seq=4536 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999125 sd_pos=988869 heater_bed: target=60 temp=60.0 pwm=0.167 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.68 cputime=564.327 memavail=693488 print_time=4782.679 buffer_time=2.443 print_stall=0 extruder: target=220 temp=220.3 pwm=0.551
Stats 4780.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5253528 bytes_read=2123707 bytes_retransmit=0 bytes_invalid=0 send_seq=119582 receive_seq=119582 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=3189 freq=180001410 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27376 bytes_read=86226 bytes_retransmit=0 bytes_invalid=0 send_seq=4537 receive_seq=4537 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999186 sd_pos=990531 heater_bed: target=60 temp=60.0 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.70 cputime=564.508 memavail=693488 print_time=4783.237 buffer_time=2.000 print_stall=0 extruder: target=220 temp=220.2 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4781.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5260258 bytes_read=2124708 bytes_retransmit=0 bytes_invalid=0 send_seq=119699 receive_seq=119699 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=5194 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27382 bytes_read=86242 bytes_retransmit=0 bytes_invalid=0 send_seq=4538 receive_seq=4538 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999142 sd_pos=993615 heater_bed: target=60 temp=60.0 pwm=0.116 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.70 cputime=564.879 memavail=693384 print_time=4784.473 buffer_time=2.235 print_stall=0 extruder: target=220 temp=220.0 pwm=0.611
Stats 4782.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5266560 bytes_read=2125719 bytes_retransmit=0 bytes_invalid=0 send_seq=119807 receive_seq=119807 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=5330 freq=180001393 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27388 bytes_read=86258 bytes_retransmit=0 bytes_invalid=0 send_seq=4539 receive_seq=4539 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999169 sd_pos=996309 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=30.1 sysload=0.70 cputime=565.096 memavail=693492 print_time=4785.404 buffer_time=2.165 print_stall=0 extruder: target=220 temp=219.9 pwm=0.611
Stats 4783.0: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5273775 bytes_read=2126735 bytes_retransmit=0 bytes_invalid=0 send_seq=119930 receive_seq=119930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=6158 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27394 bytes_read=86274 bytes_retransmit=0 bytes_invalid=0 send_seq=4540 receive_seq=4540 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999194 sd_pos=999709 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.70 cputime=565.342 memavail=693492 print_time=4786.683 buffer_time=2.444 print_stall=0 extruder: target=220 temp=219.8 pwm=0.611
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4784.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5281901 bytes_read=2127900 bytes_retransmit=0 bytes_invalid=0 send_seq=120069 receive_seq=120069 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=6830 freq=180001393 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27406 bytes_read=86306 bytes_retransmit=0 bytes_invalid=0 send_seq=4542 receive_seq=4542 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999188 sd_pos=1002758 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.70 cputime=565.691 memavail=693248 print_time=4787.843 buffer_time=2.454 print_stall=0 extruder: target=220 temp=220.0 pwm=0.553
Stats 4785.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5288421 bytes_read=2128866 bytes_retransmit=0 bytes_invalid=0 send_seq=120180 receive_seq=120179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=7855 freq=180001383 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27412 bytes_read=86335 bytes_retransmit=0 bytes_invalid=0 send_seq=4543 receive_seq=4543 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999173 sd_pos=1005947 heater_bed: target=60 temp=60.0 pwm=0.116 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.64 cputime=565.935 memavail=693248 print_time=4789.006 buffer_time=2.559 print_stall=0 extruder: target=220 temp=220.2 pwm=0.553
Stats 4786.2: gcodein=0  mcu: mcu_awake=0.024 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5296162 bytes_read=2129981 bytes_retransmit=0 bytes_invalid=0 send_seq=120311 receive_seq=120311 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=4329 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27418 bytes_read=86351 bytes_retransmit=0 bytes_invalid=0 send_seq=4544 receive_seq=4544 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999214 sd_pos=1007556 heater_bed: target=60 temp=60.0 pwm=0.172 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.3 sysload=0.64 cputime=566.095 memavail=693248 print_time=4789.614 buffer_time=2.166 print_stall=0 extruder: target=220 temp=220.3 pwm=0.553
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4787.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5302900 bytes_read=2130973 bytes_retransmit=0 bytes_invalid=0 send_seq=120426 receive_seq=120426 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=5618 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27424 bytes_read=86367 bytes_retransmit=0 bytes_invalid=0 send_seq=4545 receive_seq=4545 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999268 sd_pos=1010335 heater_bed: target=60 temp=60.1 pwm=0.120 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=30.3 sysload=0.64 cputime=566.475 memavail=693260 print_time=4790.656 buffer_time=2.206 print_stall=0 extruder: target=220 temp=220.3 pwm=0.553
Stats 4788.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5309300 bytes_read=2131945 bytes_retransmit=0 bytes_invalid=0 send_seq=120535 receive_seq=120535 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=4389 freq=180001368 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27430 bytes_read=86383 bytes_retransmit=0 bytes_invalid=0 send_seq=4546 receive_seq=4546 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999294 sd_pos=1012382 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.2 sysload=0.64 cputime=566.705 memavail=693260 print_time=4791.580 buffer_time=2.130 print_stall=0 extruder: target=220 temp=220.3 pwm=0.488
Stats 4789.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5317094 bytes_read=2133059 bytes_retransmit=0 bytes_invalid=0 send_seq=120669 receive_seq=120669 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=2938 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27436 bytes_read=86399 bytes_retransmit=0 bytes_invalid=0 send_seq=4547 receive_seq=4547 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999596 adj=49999299 sd_pos=1015245 heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.2 sysload=0.64 cputime=566.906 memavail=693260 print_time=4792.582 buffer_time=2.131 print_stall=0 extruder: target=220 temp=220.2 pwm=0.552
Stats 4790.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5322823 bytes_read=2133955 bytes_retransmit=0 bytes_invalid=0 send_seq=120768 receive_seq=120768 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=4095 freq=180001353 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27442 bytes_read=86428 bytes_retransmit=0 bytes_invalid=0 send_seq=4548 receive_seq=4548 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999305 sd_pos=1017938 heater_bed: target=60 temp=60.0 pwm=0.203 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.59 cputime=567.116 memavail=693516 print_time=4793.577 buffer_time=2.126 print_stall=0 extruder: target=220 temp=220.3 pwm=0.552
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4791.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5329073 bytes_read=2134907 bytes_retransmit=0 bytes_invalid=0 send_seq=120874 receive_seq=120873 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=11211 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27448 bytes_read=86444 bytes_retransmit=0 bytes_invalid=0 send_seq=4549 receive_seq=4549 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999285 sd_pos=1020247 heater_bed: target=60 temp=60.0 pwm=0.152 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.2 sysload=0.59 cputime=567.471 memavail=693516 print_time=4795.167 buffer_time=2.715 print_stall=0 extruder: target=220 temp=220.0 pwm=0.552
Stats 4792.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5336103 bytes_read=2135967 bytes_retransmit=0 bytes_invalid=0 send_seq=120993 receive_seq=120993 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=10524 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27454 bytes_read=86460 bytes_retransmit=0 bytes_invalid=0 send_seq=4550 receive_seq=4550 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999590 adj=49999246 sd_pos=1020804 heater_bed: target=60 temp=60.0 pwm=0.163 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.59 cputime=567.618 memavail=693516 print_time=4795.899 buffer_time=2.446 print_stall=0 extruder: target=220 temp=219.9 pwm=0.646
Stats 4793.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5344920 bytes_read=2137108 bytes_retransmit=0 bytes_invalid=0 send_seq=121141 receive_seq=121141 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=9461 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27460 bytes_read=86476 bytes_retransmit=0 bytes_invalid=0 send_seq=4551 receive_seq=4551 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999593 adj=49999244 sd_pos=1021649 heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.3 sysload=0.59 cputime=567.777 memavail=693780 print_time=4796.832 buffer_time=2.378 print_stall=0 extruder: target=220 temp=219.8 pwm=0.646
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4794.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5353928 bytes_read=2138283 bytes_retransmit=0 bytes_invalid=0 send_seq=121293 receive_seq=121293 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=16701 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27466 bytes_read=86492 bytes_retransmit=0 bytes_invalid=0 send_seq=4552 receive_seq=4552 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999592 adj=49999271 sd_pos=1024752 heater_bed: target=60 temp=60.0 pwm=0.105 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.3 sysload=0.59 cputime=568.290 memavail=693780 print_time=4798.473 buffer_time=3.019 print_stall=0 extruder: target=220 temp=219.8 pwm=0.591
Stats 4795.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5362192 bytes_read=2139416 bytes_retransmit=0 bytes_invalid=0 send_seq=121432 receive_seq=121432 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=9340 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27472 bytes_read=86521 bytes_retransmit=0 bytes_invalid=0 send_seq=4553 receive_seq=4553 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999594 adj=49999250 sd_pos=1024752 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.55 cputime=568.430 memavail=693780 print_time=4798.473 buffer_time=2.018 print_stall=0 extruder: target=220 temp=220.0 pwm=0.505
Stats 4796.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5371925 bytes_read=2140628 bytes_retransmit=0 bytes_invalid=0 send_seq=121595 receive_seq=121595 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=6288 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27478 bytes_read=86537 bytes_retransmit=0 bytes_invalid=0 send_seq=4554 receive_seq=4554 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999595 adj=49999266 sd_pos=1026368 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.2 sysload=0.55 cputime=568.715 memavail=693528 print_time=4799.974 buffer_time=2.519 print_stall=0 extruder: target=220 temp=220.1 pwm=0.505
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4797.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5382197 bytes_read=2141915 bytes_retransmit=0 bytes_invalid=0 send_seq=121767 receive_seq=121766 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=7346 freq=180001376 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27484 bytes_read=86553 bytes_retransmit=0 bytes_invalid=0 send_seq=4555 receive_seq=4555 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999261 sd_pos=1028305 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.55 cputime=569.265 memavail=693024 print_time=4801.575 buffer_time=3.119 print_stall=0 extruder: target=220 temp=220.2 pwm=0.505
Stats 4798.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5387135 bytes_read=2142800 bytes_retransmit=0 bytes_invalid=0 send_seq=121852 receive_seq=121852 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=3011 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27490 bytes_read=86569 bytes_retransmit=0 bytes_invalid=0 send_seq=4556 receive_seq=4556 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999191 sd_pos=1028305 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.55 cputime=569.379 memavail=693024 print_time=4801.575 buffer_time=2.118 print_stall=0 extruder: target=220 temp=220.2 pwm=0.505
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4799.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5390143 bytes_read=2143517 bytes_retransmit=0 bytes_invalid=0 send_seq=121913 receive_seq=121913 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=6018 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27496 bytes_read=86585 bytes_retransmit=0 bytes_invalid=0 send_seq=4557 receive_seq=4557 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999218 sd_pos=1029499 heater_bed: target=60 temp=59.9 pwm=0.256 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.55 cputime=569.680 memavail=693284 print_time=4802.635 buffer_time=2.177 print_stall=0 extruder: target=220 temp=220.1 pwm=0.558
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4800.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5399337 bytes_read=2144708 bytes_retransmit=0 bytes_invalid=0 send_seq=122068 receive_seq=122068 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=7836 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27502 bytes_read=86614 bytes_retransmit=0 bytes_invalid=0 send_seq=4558 receive_seq=4558 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999244 sd_pos=1031681 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.66 cputime=570.452 memavail=693284 print_time=4804.342 buffer_time=2.883 print_stall=0 extruder: target=220 temp=219.9 pwm=0.558
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4801.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5407288 bytes_read=2145907 bytes_retransmit=0 bytes_invalid=0 send_seq=122202 receive_seq=122202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8846 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27508 bytes_read=86630 bytes_retransmit=0 bytes_invalid=0 send_seq=4559 receive_seq=4559 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999240 sd_pos=1033606 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.66 cputime=571.209 memavail=693216 print_time=4805.292 buffer_time=2.403 print_stall=0 extruder: target=220 temp=219.6 pwm=0.621
Stats 4802.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5413800 bytes_read=2146932 bytes_retransmit=0 bytes_invalid=0 send_seq=122318 receive_seq=122318 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=5782 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27514 bytes_read=86646 bytes_retransmit=0 bytes_invalid=0 send_seq=4560 receive_seq=4560 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999234 sd_pos=1033994 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.66 cputime=571.337 memavail=693388 print_time=4806.034 buffer_time=2.143 print_stall=0 extruder: target=220 temp=219.6 pwm=0.621
Stats 4803.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5423173 bytes_read=2148137 bytes_retransmit=0 bytes_invalid=0 send_seq=122476 receive_seq=122476 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=1002 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27520 bytes_read=86662 bytes_retransmit=0 bytes_invalid=0 send_seq=4561 receive_seq=4561 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999225 sd_pos=1034782 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.66 cputime=571.569 memavail=693388 print_time=4807.077 buffer_time=2.185 print_stall=0 extruder: target=220 temp=219.6 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4804.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5429357 bytes_read=2149078 bytes_retransmit=0 bytes_invalid=0 send_seq=122584 receive_seq=122584 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=10994 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27526 bytes_read=86691 bytes_retransmit=0 bytes_invalid=0 send_seq=4562 receive_seq=4562 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999272 sd_pos=1037928 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.66 cputime=572.005 memavail=693384 print_time=4809.392 buffer_time=3.500 print_stall=0 extruder: target=220 temp=219.6 pwm=0.596
Stats 4805.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5433483 bytes_read=2149924 bytes_retransmit=0 bytes_invalid=0 send_seq=122662 receive_seq=122662 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=7448 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27532 bytes_read=86707 bytes_retransmit=0 bytes_invalid=0 send_seq=4563 receive_seq=4563 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999273 sd_pos=1037928 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.9 sysload=0.77 cputime=572.109 memavail=693408 print_time=4809.392 buffer_time=2.499 print_stall=0 extruder: target=220 temp=219.6 pwm=0.596
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4806.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5437137 bytes_read=2150716 bytes_retransmit=0 bytes_invalid=0 send_seq=122732 receive_seq=122732 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=7994 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27538 bytes_read=86723 bytes_retransmit=0 bytes_invalid=0 send_seq=4564 receive_seq=4564 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999273 sd_pos=1038811 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.77 cputime=572.444 memavail=693408 print_time=4810.047 buffer_time=2.153 print_stall=0 extruder: target=220 temp=219.9 pwm=0.596
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4807.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5446399 bytes_read=2151922 bytes_retransmit=0 bytes_invalid=0 send_seq=122893 receive_seq=122893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=8994 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27544 bytes_read=86739 bytes_retransmit=0 bytes_invalid=0 send_seq=4565 receive_seq=4565 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999200 sd_pos=1040723 heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=30.0 sysload=0.77 cputime=573.133 memavail=693660 print_time=4811.548 buffer_time=2.648 print_stall=0 extruder: target=220 temp=219.9 pwm=0.596
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4808.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5454629 bytes_read=2153068 bytes_retransmit=0 bytes_invalid=0 send_seq=123032 receive_seq=123031 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=14612 freq=180001368 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27550 bytes_read=86755 bytes_retransmit=0 bytes_invalid=0 send_seq=4566 receive_seq=4566 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999214 sd_pos=1043611 heater_bed: target=60 temp=60.1 pwm=0.127 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.77 cputime=573.430 memavail=693660 print_time=4813.128 buffer_time=3.226 print_stall=0 extruder: target=220 temp=220.0 pwm=0.538
Stats 4809.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5459797 bytes_read=2153949 bytes_retransmit=0 bytes_invalid=0 send_seq=123122 receive_seq=123122 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=10078 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27556 bytes_read=86784 bytes_retransmit=0 bytes_invalid=0 send_seq=4567 receive_seq=4567 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999222 sd_pos=1043611 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=43.5 mcu_temp: temp=37.8 chamber: temp=30.1 sysload=0.77 cputime=573.569 memavail=693660 print_time=4813.128 buffer_time=2.226 print_stall=0 extruder: target=220 temp=220.0 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4810.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5469310 bytes_read=2155155 bytes_retransmit=0 bytes_invalid=0 send_seq=123283 receive_seq=123283 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=13100 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27562 bytes_read=86800 bytes_retransmit=0 bytes_invalid=0 send_seq=4568 receive_seq=4568 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999254 sd_pos=1046209 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.87 cputime=574.632 memavail=693548 print_time=4814.476 buffer_time=2.573 print_stall=0 extruder: target=220 temp=220.0 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4811.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5478741 bytes_read=2156406 bytes_retransmit=0 bytes_invalid=0 send_seq=123441 receive_seq=123441 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=12772 freq=180001405 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27568 bytes_read=86816 bytes_retransmit=0 bytes_invalid=0 send_seq=4569 receive_seq=4569 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999190 sd_pos=1048755 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.87 cputime=574.950 memavail=693672 print_time=4815.575 buffer_time=2.663 print_stall=0 extruder: target=220 temp=219.8 pwm=0.595
Stats 4812.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5488198 bytes_read=2157606 bytes_retransmit=0 bytes_invalid=0 send_seq=123599 receive_seq=123598 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=6817 freq=180001412 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27574 bytes_read=86832 bytes_retransmit=0 bytes_invalid=0 send_seq=4570 receive_seq=4570 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999602 adj=49999140 sd_pos=1050003 heater_bed: target=60 temp=60.2 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.87 cputime=575.189 memavail=693672 print_time=4816.029 buffer_time=2.114 print_stall=0 extruder: target=220 temp=219.8 pwm=0.648
Stats 4813.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5498240 bytes_read=2158852 bytes_retransmit=0 bytes_invalid=0 send_seq=123767 receive_seq=123767 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=4177 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27580 bytes_read=86848 bytes_retransmit=0 bytes_invalid=0 send_seq=4571 receive_seq=4571 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999098 sd_pos=1052879 heater_bed: target=60 temp=60.2 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.87 cputime=575.419 memavail=693560 print_time=4817.111 buffer_time=2.195 print_stall=0 extruder: target=220 temp=219.8 pwm=0.648
Stats 4814.7: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5504428 bytes_read=2159822 bytes_retransmit=0 bytes_invalid=0 send_seq=123872 receive_seq=123872 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=4193 freq=180001390 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27586 bytes_read=86864 bytes_retransmit=0 bytes_invalid=0 send_seq=4572 receive_seq=4572 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999123 sd_pos=1055513 heater_bed: target=60 temp=60.2 pwm=0.061 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.87 cputime=575.631 memavail=693676 print_time=4818.019 buffer_time=2.102 print_stall=0 extruder: target=220 temp=219.9 pwm=0.585
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4815.8: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5511483 bytes_read=2160832 bytes_retransmit=0 bytes_invalid=0 send_seq=123991 receive_seq=123991 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=7747 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27592 bytes_read=86893 bytes_retransmit=0 bytes_invalid=0 send_seq=4573 receive_seq=4573 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999159 sd_pos=1059687 heater_bed: target=60 temp=60.2 pwm=0.063 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.88 cputime=576.015 memavail=693676 print_time=4819.633 buffer_time=2.665 print_stall=0 extruder: target=220 temp=220.2 pwm=0.533
Stats 4816.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5518277 bytes_read=2161884 bytes_retransmit=0 bytes_invalid=0 send_seq=124107 receive_seq=124107 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=4340 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27598 bytes_read=86909 bytes_retransmit=0 bytes_invalid=0 send_seq=4574 receive_seq=4574 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999597 adj=49999197 sd_pos=1060981 heater_bed: target=60 temp=60.2 pwm=0.117 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.88 cputime=576.194 memavail=693572 print_time=4820.099 buffer_time=2.130 print_stall=0 extruder: target=220 temp=220.4 pwm=0.533
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4817.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5525282 bytes_read=2162894 bytes_retransmit=0 bytes_invalid=0 send_seq=124226 receive_seq=124226 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=5435 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27604 bytes_read=86925 bytes_retransmit=0 bytes_invalid=0 send_seq=4575 receive_seq=4575 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999598 adj=49999221 sd_pos=1063877 heater_bed: target=60 temp=60.2 pwm=0.117 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.88 cputime=576.546 memavail=694444 print_time=4821.232 buffer_time=2.262 print_stall=0 extruder: target=220 temp=220.6 pwm=0.479
Stats 4818.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5531795 bytes_read=2163836 bytes_retransmit=0 bytes_invalid=0 send_seq=124337 receive_seq=124336 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4741 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27610 bytes_read=86941 bytes_retransmit=0 bytes_invalid=0 send_seq=4576 receive_seq=4576 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999599 adj=49999247 sd_pos=1066231 heater_bed: target=60 temp=60.2 pwm=0.175 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.88 cputime=576.752 memavail=694444 print_time=4822.062 buffer_time=2.092 print_stall=0 extruder: target=220 temp=220.5 pwm=0.479
Stats 4819.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5538993 bytes_read=2164894 bytes_retransmit=0 bytes_invalid=0 send_seq=124459 receive_seq=124459 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=4848 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27616 bytes_read=86970 bytes_retransmit=0 bytes_invalid=0 send_seq=4577 receive_seq=4577 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999213 sd_pos=1069385 heater_bed: target=60 temp=60.2 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.89 cputime=576.999 memavail=694028 print_time=4823.237 buffer_time=2.266 print_stall=0 extruder: target=220 temp=220.4 pwm=0.546
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4820.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5545951 bytes_read=2165904 bytes_retransmit=0 bytes_invalid=0 send_seq=124578 receive_seq=124578 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=5344 freq=180001366 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27622 bytes_read=86986 bytes_retransmit=0 bytes_invalid=0 send_seq=4578 receive_seq=4578 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999285 sd_pos=1072136 heater_bed: target=60 temp=60.2 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.89 cputime=577.341 memavail=694196 print_time=4824.215 buffer_time=2.244 print_stall=0 extruder: target=220 temp=220.2 pwm=0.546
Stats 4821.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5552330 bytes_read=2166861 bytes_retransmit=0 bytes_invalid=0 send_seq=124686 receive_seq=124686 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3869 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27628 bytes_read=87002 bytes_retransmit=0 bytes_invalid=0 send_seq=4579 receive_seq=4579 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999313 sd_pos=1073982 heater_bed: target=60 temp=60.2 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.89 cputime=577.571 memavail=694196 print_time=4825.059 buffer_time=2.087 print_stall=0 extruder: target=220 temp=220.0 pwm=0.619
Stats 4822.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5559695 bytes_read=2167947 bytes_retransmit=0 bytes_invalid=0 send_seq=124812 receive_seq=124812 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=2780 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27634 bytes_read=87018 bytes_retransmit=0 bytes_invalid=0 send_seq=4580 receive_seq=4580 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999330 sd_pos=1076724 heater_bed: target=60 temp=60.2 pwm=0.048 raspberry_pi: temp=41.9 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.89 cputime=577.812 memavail=694092 print_time=4826.106 buffer_time=2.133 print_stall=0 extruder: target=220 temp=219.8 pwm=0.619
Stats 4823.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5565643 bytes_read=2168877 bytes_retransmit=0 bytes_invalid=0 send_seq=124915 receive_seq=124915 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=3206 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27640 bytes_read=87034 bytes_retransmit=0 bytes_invalid=0 send_seq=4581 receive_seq=4581 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999601 adj=49999326 sd_pos=1079102 heater_bed: target=60 temp=60.2 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.89 cputime=578.014 memavail=694204 print_time=4827.099 buffer_time=2.120 print_stall=0 extruder: target=220 temp=219.7 pwm=0.619
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4824.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5571684 bytes_read=2169808 bytes_retransmit=0 bytes_invalid=0 send_seq=125021 receive_seq=125021 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=4808 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=27646 bytes_read=87050 bytes_retransmit=0 bytes_invalid=0 send_seq=4582 receive_seq=4582 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999600 adj=49999324 sd_pos=1081013 heater_bed: target=60 temp=60.2 pwm=0.075 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.90 cputime=578.477 memavail=694204 print_time=4828.053 buffer_time=2.074 print_stall=0 extruder: target=220 temp=219.8 pwm=0.619
Stats 4825.8: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5578243 bytes_read=2170834 bytes_retransmit=0 bytes_invalid=0 send_seq=125135 receive_seq=125135 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2990 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27652 bytes_read=87079 bytes_retransmit=0 bytes_invalid=0 send_seq=4583 receive_seq=4583 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999603 adj=49999297 sd_pos=1081980 heater_bed: target=60 temp=60.1 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.90 cputime=578.669 memavail=693980 print_time=4829.300 buffer_time=2.319 print_stall=0 extruder: target=220 temp=219.9 pwm=0.583
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4826.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5586175 bytes_read=2171945 bytes_retransmit=0 bytes_invalid=0 send_seq=125271 receive_seq=125271 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=10106 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27658 bytes_read=87095 bytes_retransmit=0 bytes_invalid=0 send_seq=4584 receive_seq=4584 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999604 adj=49999286 sd_pos=1085535 heater_bed: target=60 temp=60.2 pwm=0.068 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.90 cputime=579.510 memavail=694208 print_time=4831.128 buffer_time=3.147 print_stall=0 extruder: target=220 temp=220.0 pwm=0.528
Stats 4827.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5589521 bytes_read=2172662 bytes_retransmit=0 bytes_invalid=0 send_seq=125332 receive_seq=125332 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=7298 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27664 bytes_read=87111 bytes_retransmit=0 bytes_invalid=0 send_seq=4585 receive_seq=4585 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999269 sd_pos=1085535 heater_bed: target=60 temp=60.2 pwm=0.068 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.90 cputime=579.606 memavail=693968 print_time=4831.128 buffer_time=2.146 print_stall=0 extruder: target=220 temp=220.3 pwm=0.474
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4828.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5595482 bytes_read=2173627 bytes_retransmit=0 bytes_invalid=0 send_seq=125436 receive_seq=125436 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=9243 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27670 bytes_read=87127 bytes_retransmit=0 bytes_invalid=0 send_seq=4586 receive_seq=4586 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999605 adj=49999309 sd_pos=1086823 heater_bed: target=60 temp=60.1 pwm=0.076 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.90 cputime=579.935 memavail=693912 print_time=4832.441 buffer_time=2.459 print_stall=0 extruder: target=220 temp=220.3 pwm=0.474
Stats 4829.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5606066 bytes_read=2174927 bytes_retransmit=0 bytes_invalid=0 send_seq=125613 receive_seq=125613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=2240 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27676 bytes_read=87143 bytes_retransmit=0 bytes_invalid=0 send_seq=4587 receive_seq=4587 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999606 adj=49999319 sd_pos=1087293 heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=0.91 cputime=580.166 memavail=693912 print_time=4833.314 buffer_time=2.330 print_stall=0 extruder: target=220 temp=220.1 pwm=0.548
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4831.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5610739 bytes_read=2175797 bytes_retransmit=0 bytes_invalid=0 send_seq=125693 receive_seq=125693 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27682 bytes_read=87172 bytes_retransmit=0 bytes_invalid=0 send_seq=4588 receive_seq=4588 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999285 sd_pos=1089513 heater_bed: target=60 temp=60.1 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.1 sysload=0.91 cputime=580.715 memavail=693968 print_time=4833.982 buffer_time=1.699 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
Stats 4832.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5618245 bytes_read=2176909 bytes_retransmit=0 bytes_invalid=0 send_seq=125821 receive_seq=125821 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=3686 freq=180001336 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27688 bytes_read=87188 bytes_retransmit=0 bytes_invalid=0 send_seq=4589 receive_seq=4589 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999313 sd_pos=1089845 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.91 cputime=580.866 memavail=693940 print_time=4835.426 buffer_time=2.143 print_stall=0 extruder: target=220 temp=219.7 pwm=0.673
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4833.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5621099 bytes_read=2177605 bytes_retransmit=0 bytes_invalid=0 send_seq=125875 receive_seq=125875 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=15198 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27694 bytes_read=87204 bytes_retransmit=0 bytes_invalid=0 send_seq=4590 receive_seq=4590 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999315 sd_pos=1092557 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.91 cputime=581.824 memavail=693988 print_time=4836.981 buffer_time=2.696 print_stall=0 extruder: target=220 temp=219.5 pwm=0.673
Stats 4834.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5630978 bytes_read=2178836 bytes_retransmit=0 bytes_invalid=0 send_seq=126041 receive_seq=126041 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=9102 freq=180001338 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27700 bytes_read=87220 bytes_retransmit=0 bytes_invalid=0 send_seq=4591 receive_seq=4591 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999264 sd_pos=1093341 heater_bed: target=60 temp=60.1 pwm=0.133 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.91 cputime=582.022 memavail=693988 print_time=4837.827 buffer_time=2.529 print_stall=0 extruder: target=220 temp=219.4 pwm=0.673
Stats 4835.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5640756 bytes_read=2180101 bytes_retransmit=0 bytes_invalid=0 send_seq=126205 receive_seq=126205 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=1967 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27706 bytes_read=87249 bytes_retransmit=0 bytes_invalid=0 send_seq=4592 receive_seq=4592 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999297 sd_pos=1093730 heater_bed: target=60 temp=60.1 pwm=0.053 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=30.0 sysload=0.91 cputime=582.166 memavail=693992 print_time=4838.429 buffer_time=2.130 print_stall=0 extruder: target=220 temp=219.6 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4836.1: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=5649044 bytes_read=2181216 bytes_retransmit=0 bytes_invalid=0 send_seq=126345 receive_seq=126345 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=5766 freq=180001336 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27712 bytes_read=87265 bytes_retransmit=0 bytes_invalid=0 send_seq=4593 receive_seq=4593 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999612 adj=49999274 sd_pos=1096396 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.91 cputime=583.088 memavail=693992 print_time=4840.140 buffer_time=2.841 print_stall=0 extruder: target=220 temp=219.9 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4837.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=5653106 bytes_read=2182087 bytes_retransmit=0 bytes_invalid=0 send_seq=126422 receive_seq=126422 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=15710 freq=180001385 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27718 bytes_read=87281 bytes_retransmit=0 bytes_invalid=0 send_seq=4594 receive_seq=4594 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999289 sd_pos=1099571 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.91 cputime=583.569 memavail=694244 print_time=4841.534 buffer_time=3.061 print_stall=0 extruder: target=220 temp=220.2 pwm=0.549
Stats 4838.3: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=5659106 bytes_read=2183044 bytes_retransmit=0 bytes_invalid=0 send_seq=126531 receive_seq=126531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=10495 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27724 bytes_read=87297 bytes_retransmit=0 bytes_invalid=0 send_seq=4595 receive_seq=4595 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999200 sd_pos=1099571 heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.91 cputime=583.692 memavail=694004 print_time=4841.534 buffer_time=2.060 print_stall=0 extruder: target=220 temp=220.2 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4839.4: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=5671419 bytes_read=2184528 bytes_retransmit=0 bytes_invalid=0 send_seq=126736 receive_seq=126736 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=11131 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=27730 bytes_read=87313 bytes_retransmit=0 bytes_invalid=0 send_seq=4596 receive_seq=4596 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999227 sd_pos=1102221 heater_bed: target=60 temp=60.0 pwm=0.141 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.91 cputime=584.608 memavail=694004 print_time=4843.359 buffer_time=2.710 print_stall=0 extruder: target=220 temp=220.3 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4840.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=5681708 bytes_read=2185804 bytes_retransmit=0 bytes_invalid=0 send_seq=126908 receive_seq=126908 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=9440 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=27736 bytes_read=87342 bytes_retransmit=0 bytes_invalid=0 send_seq=4597 receive_seq=4597 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999243 sd_pos=1103487 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.92 cputime=584.822 memavail=693536 print_time=4844.380 buffer_time=2.731 print_stall=0 extruder: target=220 temp=220.3 pwm=0.547
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4841.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=5686343 bytes_read=2186654 bytes_retransmit=0 bytes_invalid=0 send_seq=126988 receive_seq=126987 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=12110 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=27742 bytes_read=87358 bytes_retransmit=0 bytes_invalid=0 send_seq=4598 receive_seq=4598 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999615 adj=49999231 sd_pos=1105117 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.92 cputime=585.152 memavail=693752 print_time=4845.334 buffer_time=2.684 print_stall=0 extruder: target=220 temp=220.1 pwm=0.598
Stats 4842.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5695924 bytes_read=2187867 bytes_retransmit=0 bytes_invalid=0 send_seq=127148 receive_seq=127148 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=5649 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=27748 bytes_read=87374 bytes_retransmit=0 bytes_invalid=0 send_seq=4599 receive_seq=4599 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999613 adj=49999227 sd_pos=1106247 heater_bed: target=60 temp=59.9 pwm=0.212 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=0.92 cputime=585.321 memavail=693752 print_time=4845.717 buffer_time=2.067 print_stall=0 extruder: target=220 temp=220.0 pwm=0.598
Stats 4843.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5704573 bytes_read=2189000 bytes_retransmit=0 bytes_invalid=0 send_seq=127294 receive_seq=127294 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=4162 freq=180001353 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=27754 bytes_read=87390 bytes_retransmit=0 bytes_invalid=0 send_seq=4600 receive_seq=4600 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999231 sd_pos=1109128 heater_bed: target=60 temp=59.8 pwm=0.183 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.92 cputime=585.551 memavail=693648 print_time=4846.798 buffer_time=2.146 print_stall=0 extruder: target=220 temp=219.9 pwm=0.598
Stats 4844.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5711175 bytes_read=2190009 bytes_retransmit=0 bytes_invalid=0 send_seq=127407 receive_seq=127407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=4517 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=27760 bytes_read=87406 bytes_retransmit=0 bytes_invalid=0 send_seq=4601 receive_seq=4601 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999227 sd_pos=1111940 heater_bed: target=60 temp=59.8 pwm=0.234 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.92 cputime=585.775 memavail=693764 print_time=4847.833 buffer_time=2.180 print_stall=0 extruder: target=220 temp=219.9 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4845.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5717790 bytes_read=2190975 bytes_retransmit=0 bytes_invalid=0 send_seq=127520 receive_seq=127520 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=4630 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=27766 bytes_read=87435 bytes_retransmit=0 bytes_invalid=0 send_seq=4602 receive_seq=4602 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999224 sd_pos=1114283 heater_bed: target=60 temp=59.7 pwm=0.250 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=1.01 cputime=586.114 memavail=693764 print_time=4848.808 buffer_time=2.154 print_stall=0 extruder: target=220 temp=220.1 pwm=0.546
Stats 4846.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5724471 bytes_read=2191967 bytes_retransmit=0 bytes_invalid=0 send_seq=127633 receive_seq=127633 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=5067 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=27772 bytes_read=87451 bytes_retransmit=0 bytes_invalid=0 send_seq=4603 receive_seq=4603 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999242 sd_pos=1117329 heater_bed: target=60 temp=59.8 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.01 cputime=586.355 memavail=693748 print_time=4849.923 buffer_time=2.269 print_stall=0 extruder: target=220 temp=220.1 pwm=0.546
Stats 4847.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5731377 bytes_read=2193012 bytes_retransmit=0 bytes_invalid=0 send_seq=127751 receive_seq=127750 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=4884 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=27778 bytes_read=87467 bytes_retransmit=0 bytes_invalid=0 send_seq=4604 receive_seq=4604 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999230 sd_pos=1119958 heater_bed: target=60 temp=59.7 pwm=0.224 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=1.01 cputime=586.620 memavail=693776 print_time=4850.857 buffer_time=2.202 print_stall=0 extruder: target=220 temp=220.2 pwm=0.546
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4848.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5737899 bytes_read=2193983 bytes_retransmit=0 bytes_invalid=0 send_seq=127864 receive_seq=127864 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=4659 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=27784 bytes_read=87483 bytes_retransmit=0 bytes_invalid=0 send_seq=4605 receive_seq=4605 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999267 sd_pos=1122195 heater_bed: target=60 temp=59.8 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=1.01 cputime=586.964 memavail=693776 print_time=4851.770 buffer_time=2.114 print_stall=0 extruder: target=220 temp=220.2 pwm=0.546
Stats 4849.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5744748 bytes_read=2194990 bytes_retransmit=0 bytes_invalid=0 send_seq=127980 receive_seq=127980 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5956 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=27790 bytes_read=87499 bytes_retransmit=0 bytes_invalid=0 send_seq=4606 receive_seq=4606 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999261 sd_pos=1125511 heater_bed: target=60 temp=59.8 pwm=0.098 raspberry_pi: temp=42.4 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=1.01 cputime=587.204 memavail=693672 print_time=4853.030 buffer_time=2.374 print_stall=0 extruder: target=220 temp=220.2 pwm=0.547
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4850.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5752124 bytes_read=2196049 bytes_retransmit=0 bytes_invalid=0 send_seq=128104 receive_seq=128103 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=5925 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27796 bytes_read=87528 bytes_retransmit=0 bytes_invalid=0 send_seq=4607 receive_seq=4607 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999256 sd_pos=1128289 heater_bed: target=60 temp=59.8 pwm=0.133 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.8 sysload=1.01 cputime=587.568 memavail=693768 print_time=4854.047 buffer_time=2.350 print_stall=0 extruder: target=220 temp=220.2 pwm=0.547
Stats 4851.5: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5758688 bytes_read=2197015 bytes_retransmit=0 bytes_invalid=0 send_seq=128216 receive_seq=128216 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=4272 freq=180001366 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27802 bytes_read=87544 bytes_retransmit=0 bytes_invalid=0 send_seq=4608 receive_seq=4608 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999238 sd_pos=1129914 heater_bed: target=60 temp=59.8 pwm=0.202 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.01 cputime=587.777 memavail=693768 print_time=4854.890 buffer_time=2.193 print_stall=0 extruder: target=220 temp=220.1 pwm=0.547
Stats 4852.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5765662 bytes_read=2198082 bytes_retransmit=0 bytes_invalid=0 send_seq=128335 receive_seq=128335 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=4237 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27808 bytes_read=87560 bytes_retransmit=0 bytes_invalid=0 send_seq=4609 receive_seq=4609 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999165 sd_pos=1133135 heater_bed: target=60 temp=59.9 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.01 cputime=588.000 memavail=693664 print_time=4855.979 buffer_time=2.281 print_stall=0 extruder: target=220 temp=220.0 pwm=0.547
Stats 4853.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5771812 bytes_read=2199017 bytes_retransmit=0 bytes_invalid=0 send_seq=128439 receive_seq=128439 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=4343 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27814 bytes_read=87576 bytes_retransmit=0 bytes_invalid=0 send_seq=4610 receive_seq=4610 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999178 sd_pos=1135601 heater_bed: target=60 temp=59.9 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=1.01 cputime=588.270 memavail=693780 print_time=4856.937 buffer_time=2.238 print_stall=0 extruder: target=220 temp=219.8 pwm=0.602
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4854.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5777997 bytes_read=2199938 bytes_retransmit=0 bytes_invalid=0 send_seq=128543 receive_seq=128543 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=6420 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=27820 bytes_read=87592 bytes_retransmit=0 bytes_invalid=0 send_seq=4611 receive_seq=4611 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999607 adj=49999180 sd_pos=1137815 heater_bed: target=60 temp=59.9 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.01 cputime=588.720 memavail=693780 print_time=4857.951 buffer_time=2.252 print_stall=0 extruder: target=220 temp=219.8 pwm=0.602
Stats 4855.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5784609 bytes_read=2200954 bytes_retransmit=0 bytes_invalid=0 send_seq=128655 receive_seq=128655 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=5245 freq=180001360 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=27826 bytes_read=87621 bytes_retransmit=0 bytes_invalid=0 send_seq=4612 receive_seq=4612 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999608 adj=49999185 sd_pos=1138958 heater_bed: target=60 temp=59.9 pwm=0.205 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.2 sysload=1.01 cputime=588.969 memavail=693272 print_time=4859.323 buffer_time=2.623 print_stall=0 extruder: target=220 temp=219.8 pwm=0.602
Stats 4856.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5792478 bytes_read=2202039 bytes_retransmit=0 bytes_invalid=0 send_seq=128790 receive_seq=128789 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=881 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=27832 bytes_read=87637 bytes_retransmit=0 bytes_invalid=0 send_seq=4613 receive_seq=4613 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999210 sd_pos=1139491 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.01 cputime=589.133 memavail=691440 print_time=4860.126 buffer_time=2.426 print_stall=0 extruder: target=220 temp=219.9 pwm=0.602
Stats 4857.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5796812 bytes_read=2202857 bytes_retransmit=0 bytes_invalid=0 send_seq=128867 receive_seq=128867 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=27838 bytes_read=87653 bytes_retransmit=0 bytes_invalid=0 send_seq=4614 receive_seq=4614 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999252 sd_pos=1139988 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.01 cputime=589.283 memavail=694288 print_time=4861.053 buffer_time=2.352 print_stall=0 extruder: target=220 temp=219.9 pwm=0.581
Stats 4858.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5799233 bytes_read=2203567 bytes_retransmit=0 bytes_invalid=0 send_seq=128920 receive_seq=128920 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=27844 bytes_read=87669 bytes_retransmit=0 bytes_invalid=0 send_seq=4615 receive_seq=4615 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999613 adj=49999285 sd_pos=1140189 heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=1.01 cputime=589.443 memavail=694184 print_time=4861.736 buffer_time=2.035 print_stall=0 extruder: target=220 temp=220.1 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4859.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5805695 bytes_read=2204588 bytes_retransmit=0 bytes_invalid=0 send_seq=129039 receive_seq=129039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=8654 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=27850 bytes_read=87685 bytes_retransmit=0 bytes_invalid=0 send_seq=4616 receive_seq=4616 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999612 adj=49999330 sd_pos=1143673 heater_bed: target=60 temp=60.0 pwm=0.084 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.01 cputime=590.120 memavail=694296 print_time=4863.560 buffer_time=2.858 print_stall=0 extruder: target=220 temp=220.1 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4860.6: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5809090 bytes_read=2205364 bytes_retransmit=0 bytes_invalid=0 send_seq=129106 receive_seq=129106 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=13630 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27856 bytes_read=87714 bytes_retransmit=0 bytes_invalid=0 send_seq=4617 receive_seq=4617 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999612 adj=49999261 sd_pos=1145229 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.01 cputime=590.434 memavail=694296 print_time=4864.395 buffer_time=2.633 print_stall=0 extruder: target=220 temp=220.2 pwm=0.520
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4861.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5819709 bytes_read=2206734 bytes_retransmit=0 bytes_invalid=0 send_seq=129282 receive_seq=129282 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=16039 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27862 bytes_read=87729 bytes_retransmit=0 bytes_invalid=0 send_seq=4618 receive_seq=4618 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999281 sd_pos=1148154 heater_bed: target=60 temp=60.1 pwm=0.090 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=1.01 cputime=591.142 memavail=694192 print_time=4865.990 buffer_time=3.006 print_stall=0 extruder: target=220 temp=219.9 pwm=0.578
Stats 4862.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5829730 bytes_read=2207989 bytes_retransmit=0 bytes_invalid=0 send_seq=129450 receive_seq=129450 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=7037 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27868 bytes_read=87744 bytes_retransmit=0 bytes_invalid=0 send_seq=4619 receive_seq=4619 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999269 sd_pos=1148154 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.01 cputime=591.254 memavail=694296 print_time=4865.990 buffer_time=2.005 print_stall=0 extruder: target=220 temp=219.7 pwm=0.634
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4863.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5837784 bytes_read=2209086 bytes_retransmit=0 bytes_invalid=0 send_seq=129587 receive_seq=129587 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=5792 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27874 bytes_read=87759 bytes_retransmit=0 bytes_invalid=0 send_seq=4620 receive_seq=4620 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999235 sd_pos=1149269 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=1.01 cputime=591.709 memavail=694296 print_time=4867.182 buffer_time=2.196 print_stall=0 extruder: target=220 temp=219.5 pwm=0.696
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4864.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5847375 bytes_read=2210331 bytes_retransmit=0 bytes_invalid=0 send_seq=129748 receive_seq=129747 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=5045 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=27880 bytes_read=87774 bytes_retransmit=0 bytes_invalid=0 send_seq=4621 receive_seq=4621 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999235 sd_pos=1151181 heater_bed: target=60 temp=60.0 pwm=0.147 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=1.01 cputime=592.269 memavail=694320 print_time=4868.307 buffer_time=2.321 print_stall=0 extruder: target=220 temp=219.4 pwm=0.696
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4865.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=5853103 bytes_read=2211252 bytes_retransmit=0 bytes_invalid=0 send_seq=129846 receive_seq=129846 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=10365 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=27886 bytes_read=87802 bytes_retransmit=0 bytes_invalid=0 send_seq=4622 receive_seq=4622 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999243 sd_pos=1153431 heater_bed: target=60 temp=60.0 pwm=0.147 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.92 cputime=592.814 memavail=694304 print_time=4869.883 buffer_time=2.896 print_stall=0 extruder: target=220 temp=219.5 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4867.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5863295 bytes_read=2212609 bytes_retransmit=0 bytes_invalid=0 send_seq=130016 receive_seq=130015 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=8766 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=27892 bytes_read=87818 bytes_retransmit=0 bytes_invalid=0 send_seq=4623 receive_seq=4623 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999251 sd_pos=1154964 heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.92 cputime=593.550 memavail=694304 print_time=4870.771 buffer_time=2.298 print_stall=0 extruder: target=220 temp=220.0 pwm=0.557
toolhead: max_velocity: 500.000000
max_accel: 3000.000000
max_accel_to_decel: 1500.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4868.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5871204 bytes_read=2213684 bytes_retransmit=0 bytes_invalid=0 send_seq=130150 receive_seq=130150 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=12254 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=27898 bytes_read=87834 bytes_retransmit=0 bytes_invalid=0 send_seq=4624 receive_seq=4624 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999206 sd_pos=1157312 heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.92 cputime=593.894 memavail=694068 print_time=4872.002 buffer_time=2.529 print_stall=0 extruder: target=220 temp=220.3 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4869.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5880291 bytes_read=2214905 bytes_retransmit=0 bytes_invalid=0 send_seq=130303 receive_seq=130303 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=11957 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=27904 bytes_read=87850 bytes_retransmit=0 bytes_invalid=0 send_seq=4625 receive_seq=4625 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999612 adj=49999205 sd_pos=1158874 heater_bed: target=60 temp=60.1 pwm=0.104 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.92 cputime=594.471 memavail=694068 print_time=4872.983 buffer_time=2.509 print_stall=0 extruder: target=220 temp=220.5 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4870.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5889063 bytes_read=2216065 bytes_retransmit=0 bytes_invalid=0 send_seq=130452 receive_seq=130452 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=10294 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000015 bytes_write=27910 bytes_read=87866 bytes_retransmit=0 bytes_invalid=0 send_seq=4626 receive_seq=4626 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999615 adj=49999244 sd_pos=1160016 heater_bed: target=60 temp=60.1 pwm=0.104 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.01 cputime=594.775 memavail=694068 print_time=4873.685 buffer_time=2.210 print_stall=0 extruder: target=220 temp=220.5 pwm=0.472
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4871.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5901935 bytes_read=2217636 bytes_retransmit=0 bytes_invalid=0 send_seq=130666 receive_seq=130666 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=8448 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27922 bytes_read=87911 bytes_retransmit=0 bytes_invalid=0 send_seq=4628 receive_seq=4628 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999613 adj=49999275 sd_pos=1162442 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=1.01 cputime=595.561 memavail=693828 print_time=4875.730 buffer_time=2.896 print_stall=0 extruder: target=220 temp=220.1 pwm=0.566
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4872.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5910679 bytes_read=2218815 bytes_retransmit=0 bytes_invalid=0 send_seq=130813 receive_seq=130813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3375 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27928 bytes_read=87927 bytes_retransmit=0 bytes_invalid=0 send_seq=4629 receive_seq=4629 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999616 adj=49999250 sd_pos=1163513 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=1.01 cputime=595.807 memavail=693928 print_time=4876.262 buffer_time=2.404 print_stall=0 extruder: target=220 temp=219.8 pwm=0.620
Stats 4873.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5913684 bytes_read=2219532 bytes_retransmit=0 bytes_invalid=0 send_seq=130874 receive_seq=130874 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=6212 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27934 bytes_read=87943 bytes_retransmit=0 bytes_invalid=0 send_seq=4630 receive_seq=4630 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999615 adj=49999272 sd_pos=1165910 heater_bed: target=60 temp=59.9 pwm=0.180 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=30.2 sysload=1.01 cputime=595.999 memavail=693892 print_time=4877.233 buffer_time=2.374 print_stall=0 extruder: target=220 temp=219.7 pwm=0.678
Stats 4874.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5921524 bytes_read=2220627 bytes_retransmit=0 bytes_invalid=0 send_seq=131007 receive_seq=131007 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=5086 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=27940 bytes_read=87959 bytes_retransmit=0 bytes_invalid=0 send_seq=4631 receive_seq=4631 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999613 adj=49999256 sd_pos=1168647 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=30.1 sysload=1.01 cputime=596.268 memavail=693956 print_time=4878.263 buffer_time=2.404 print_stall=0 extruder: target=220 temp=219.6 pwm=0.678
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4875.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000012 bytes_write=5927680 bytes_read=2221597 bytes_retransmit=0 bytes_invalid=0 send_seq=131115 receive_seq=131115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=4486 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27946 bytes_read=87988 bytes_retransmit=0 bytes_invalid=0 send_seq=4632 receive_seq=4632 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999613 adj=49999262 sd_pos=1170886 heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.93 cputime=596.577 memavail=693956 print_time=4879.050 buffer_time=2.190 print_stall=0 extruder: target=220 temp=219.8 pwm=0.610
Stats 4876.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5933734 bytes_read=2222545 bytes_retransmit=0 bytes_invalid=0 send_seq=131219 receive_seq=131219 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=5330 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27952 bytes_read=88004 bytes_retransmit=0 bytes_invalid=0 send_seq=4633 receive_seq=4633 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999612 adj=49999244 sd_pos=1173541 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.1 sysload=0.93 cputime=596.810 memavail=693852 print_time=4880.127 buffer_time=2.268 print_stall=0 extruder: target=220 temp=220.1 pwm=0.528
Stats 4877.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5940982 bytes_read=2223595 bytes_retransmit=0 bytes_invalid=0 send_seq=131343 receive_seq=131343 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=5529 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27958 bytes_read=88020 bytes_retransmit=0 bytes_invalid=0 send_seq=4634 receive_seq=4634 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999611 adj=49999254 sd_pos=1176354 heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.93 cputime=597.071 memavail=693716 print_time=4881.238 buffer_time=2.377 print_stall=0 extruder: target=220 temp=220.3 pwm=0.528
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4878.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5947368 bytes_read=2224570 bytes_retransmit=0 bytes_invalid=0 send_seq=131452 receive_seq=131452 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=5449 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27964 bytes_read=88036 bytes_retransmit=0 bytes_invalid=0 send_seq=4635 receive_seq=4635 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999610 adj=49999268 sd_pos=1178578 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.93 cputime=597.415 memavail=693716 print_time=4882.142 buffer_time=2.280 print_stall=0 extruder: target=220 temp=220.6 pwm=0.475
Stats 4879.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5953954 bytes_read=2225547 bytes_retransmit=0 bytes_invalid=0 send_seq=131565 receive_seq=131565 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=5050 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27970 bytes_read=88052 bytes_retransmit=0 bytes_invalid=0 send_seq=4636 receive_seq=4636 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999609 adj=49999248 sd_pos=1181344 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.93 cputime=597.622 memavail=693704 print_time=4883.085 buffer_time=2.223 print_stall=0 extruder: target=220 temp=220.5 pwm=0.475
Stats 4880.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=5961249 bytes_read=2226602 bytes_retransmit=0 bytes_invalid=0 send_seq=131690 receive_seq=131690 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=4380 freq=180001387 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27976 bytes_read=88081 bytes_retransmit=0 bytes_invalid=0 send_seq=4637 receive_seq=4637 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999260 sd_pos=1184054 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.86 cputime=597.835 memavail=693720 print_time=4884.034 buffer_time=2.172 print_stall=0 extruder: target=220 temp=220.4 pwm=0.553
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4881.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5967557 bytes_read=2227588 bytes_retransmit=0 bytes_invalid=0 send_seq=131798 receive_seq=131798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=4846 freq=180001384 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27982 bytes_read=88097 bytes_retransmit=0 bytes_invalid=0 send_seq=4638 receive_seq=4638 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999194 sd_pos=1186273 heater_bed: target=60 temp=60.0 pwm=0.148 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.86 cputime=598.178 memavail=693720 print_time=4885.113 buffer_time=2.250 print_stall=0 extruder: target=220 temp=220.1 pwm=0.622
Stats 4882.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5974575 bytes_read=2228589 bytes_retransmit=0 bytes_invalid=0 send_seq=131918 receive_seq=131918 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=3482 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27988 bytes_read=88113 bytes_retransmit=0 bytes_invalid=0 send_seq=4639 receive_seq=4639 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999193 sd_pos=1189042 heater_bed: target=60 temp=60.1 pwm=0.077 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.86 cputime=598.418 memavail=693916 print_time=4886.096 buffer_time=2.231 print_stall=0 extruder: target=220 temp=219.9 pwm=0.622
Stats 4883.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5981171 bytes_read=2229605 bytes_retransmit=0 bytes_invalid=0 send_seq=132033 receive_seq=132033 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=3152 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=27994 bytes_read=88129 bytes_retransmit=0 bytes_invalid=0 send_seq=4640 receive_seq=4640 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999188 sd_pos=1191536 heater_bed: target=60 temp=60.0 pwm=0.107 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.86 cputime=598.611 memavail=693980 print_time=4887.058 buffer_time=2.193 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4884.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5986873 bytes_read=2230540 bytes_retransmit=0 bytes_invalid=0 send_seq=132134 receive_seq=132134 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4702 freq=180001379 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28000 bytes_read=88145 bytes_retransmit=0 bytes_invalid=0 send_seq=4641 receive_seq=4641 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999203 sd_pos=1193786 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.86 cputime=599.233 memavail=693980 print_time=4888.009 buffer_time=2.144 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
Stats 4885.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=5992845 bytes_read=2231472 bytes_retransmit=0 bytes_invalid=0 send_seq=132239 receive_seq=132238 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3752 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28006 bytes_read=88174 bytes_retransmit=0 bytes_invalid=0 send_seq=4642 receive_seq=4642 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999213 sd_pos=1194718 heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.79 cputime=599.417 memavail=693876 print_time=4889.325 buffer_time=2.459 print_stall=0 extruder: target=220 temp=219.8 pwm=0.622
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4886.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6000598 bytes_read=2232578 bytes_retransmit=0 bytes_invalid=0 send_seq=132370 receive_seq=132370 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=8099 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28012 bytes_read=88190 bytes_retransmit=0 bytes_invalid=0 send_seq=4643 receive_seq=4643 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999616 adj=49999223 sd_pos=1197636 heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.79 cputime=599.948 memavail=693984 print_time=4890.953 buffer_time=3.087 print_stall=0 extruder: target=220 temp=219.8 pwm=0.588
Stats 4887.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6004513 bytes_read=2233364 bytes_retransmit=0 bytes_invalid=0 send_seq=132439 receive_seq=132439 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4754 freq=180001377 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28018 bytes_read=88206 bytes_retransmit=0 bytes_invalid=0 send_seq=4644 receive_seq=4644 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999221 sd_pos=1197636 heater_bed: target=60 temp=60.1 pwm=0.146 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.79 cputime=600.062 memavail=694248 print_time=4890.953 buffer_time=2.086 print_stall=0 extruder: target=220 temp=220.1 pwm=0.514
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4888.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6009559 bytes_read=2234225 bytes_retransmit=0 bytes_invalid=0 send_seq=132531 receive_seq=132531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=8587 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28024 bytes_read=88222 bytes_retransmit=0 bytes_invalid=0 send_seq=4645 receive_seq=4645 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999231 sd_pos=1199535 heater_bed: target=60 temp=60.1 pwm=0.146 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.79 cputime=600.371 memavail=693876 print_time=4892.180 buffer_time=2.313 print_stall=0 extruder: target=220 temp=220.3 pwm=0.514
Stats 4889.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6018976 bytes_read=2235452 bytes_retransmit=0 bytes_invalid=0 send_seq=132689 receive_seq=132688 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=2160 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28030 bytes_read=88238 bytes_retransmit=0 bytes_invalid=0 send_seq=4646 receive_seq=4646 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999616 adj=49999227 sd_pos=1200034 heater_bed: target=60 temp=60.0 pwm=0.146 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.79 cputime=600.556 memavail=693996 print_time=4892.873 buffer_time=2.005 print_stall=0 extruder: target=220 temp=220.3 pwm=0.514
Stats 4890.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6025086 bytes_read=2236399 bytes_retransmit=0 bytes_invalid=0 send_seq=132795 receive_seq=132795 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=28036 bytes_read=88267 bytes_retransmit=0 bytes_invalid=0 send_seq=4647 receive_seq=4647 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999218 sd_pos=1200461 heater_bed: target=60 temp=60.1 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.72 cputime=600.731 memavail=693996 print_time=4894.055 buffer_time=2.185 print_stall=0 extruder: target=220 temp=220.1 pwm=0.591
Stats 4891.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6029305 bytes_read=2237196 bytes_retransmit=0 bytes_invalid=0 send_seq=132875 receive_seq=132875 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001377 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=28042 bytes_read=88283 bytes_retransmit=0 bytes_invalid=0 send_seq=4648 receive_seq=4648 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999293 sd_pos=1200845 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=41.9 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.72 cputime=600.918 memavail=693884 print_time=4895.269 buffer_time=2.399 print_stall=0 extruder: target=220 temp=219.9 pwm=0.591
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4892.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6034286 bytes_read=2238128 bytes_retransmit=0 bytes_invalid=0 send_seq=132967 receive_seq=132967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=2414 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=28048 bytes_read=88299 bytes_retransmit=0 bytes_invalid=0 send_seq=4649 receive_seq=4649 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999282 sd_pos=1202056 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.72 cputime=601.452 memavail=693988 print_time=4896.432 buffer_time=2.561 print_stall=0 extruder: target=220 temp=219.8 pwm=0.591
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4893.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6038417 bytes_read=2238959 bytes_retransmit=0 bytes_invalid=0 send_seq=133045 receive_seq=133045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=6981 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=28054 bytes_read=88315 bytes_retransmit=0 bytes_invalid=0 send_seq=4650 receive_seq=4650 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999280 sd_pos=1203902 heater_bed: target=60 temp=60.0 pwm=0.163 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.72 cputime=602.281 memavail=693988 print_time=4897.506 buffer_time=2.480 print_stall=0 extruder: target=220 temp=219.6 pwm=0.667
Stats 4894.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6044057 bytes_read=2239900 bytes_retransmit=0 bytes_invalid=0 send_seq=133145 receive_seq=133145 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=3710 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=28060 bytes_read=88331 bytes_retransmit=0 bytes_invalid=0 send_seq=4651 receive_seq=4651 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999278 sd_pos=1204160 heater_bed: target=60 temp=60.1 pwm=0.146 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.72 cputime=602.393 memavail=693956 print_time=4898.218 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.6 pwm=0.667
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4895.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6051280 bytes_read=2240925 bytes_retransmit=0 bytes_invalid=0 send_seq=133267 receive_seq=133267 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5472 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28066 bytes_read=88360 bytes_retransmit=0 bytes_invalid=0 send_seq=4652 receive_seq=4652 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999302 sd_pos=1206580 heater_bed: target=60 temp=60.1 pwm=0.088 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=30.1 sysload=0.66 cputime=602.863 memavail=694004 print_time=4899.793 buffer_time=2.765 print_stall=0 extruder: target=220 temp=219.7 pwm=0.609
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4896.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6057514 bytes_read=2241882 bytes_retransmit=0 bytes_invalid=0 send_seq=133373 receive_seq=133372 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=16676 freq=180001367 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28072 bytes_read=88376 bytes_retransmit=0 bytes_invalid=0 send_seq=4653 receive_seq=4653 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999281 sd_pos=1210447 heater_bed: target=60 temp=60.1 pwm=0.156 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.66 cputime=603.270 memavail=694004 print_time=4901.481 buffer_time=3.435 print_stall=0 extruder: target=220 temp=219.8 pwm=0.609
Stats 4897.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6060957 bytes_read=2242672 bytes_retransmit=0 bytes_invalid=0 send_seq=133440 receive_seq=133439 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=13814 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28078 bytes_read=88392 bytes_retransmit=0 bytes_invalid=0 send_seq=4654 receive_seq=4654 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999267 sd_pos=1210447 heater_bed: target=60 temp=60.0 pwm=0.156 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.66 cputime=603.376 memavail=693728 print_time=4901.481 buffer_time=2.434 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4898.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6069960 bytes_read=2243838 bytes_retransmit=0 bytes_invalid=0 send_seq=133592 receive_seq=133592 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=15123 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28084 bytes_read=88408 bytes_retransmit=0 bytes_invalid=0 send_seq=4655 receive_seq=4655 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999265 sd_pos=1212349 heater_bed: target=60 temp=60.1 pwm=0.156 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.8 sysload=0.66 cputime=603.728 memavail=693760 print_time=4902.626 buffer_time=2.577 print_stall=0 extruder: target=220 temp=220.1 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4900.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6083252 bytes_read=2245402 bytes_retransmit=0 bytes_invalid=0 send_seq=133813 receive_seq=133813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=14449 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28090 bytes_read=88424 bytes_retransmit=0 bytes_invalid=0 send_seq=4656 receive_seq=4656 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999304 sd_pos=1214859 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.69 cputime=604.554 memavail=693760 print_time=4903.893 buffer_time=2.677 print_stall=0 extruder: target=220 temp=220.2 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4901.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6097342 bytes_read=2247090 bytes_retransmit=0 bytes_invalid=0 send_seq=134047 receive_seq=134045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=12729 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28096 bytes_read=88453 bytes_retransmit=0 bytes_invalid=0 send_seq=4657 receive_seq=4657 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999238 sd_pos=1217324 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.69 cputime=605.589 memavail=694016 print_time=4905.069 buffer_time=2.343 print_stall=0 extruder: target=220 temp=220.2 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4902.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6107374 bytes_read=2248357 bytes_retransmit=0 bytes_invalid=0 send_seq=134215 receive_seq=134215 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=7403 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28102 bytes_read=88469 bytes_retransmit=0 bytes_invalid=0 send_seq=4658 receive_seq=4658 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999255 sd_pos=1218466 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.69 cputime=605.790 memavail=694016 print_time=4905.763 buffer_time=2.037 print_stall=0 extruder: target=220 temp=220.1 pwm=0.567
Stats 4903.5: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6117913 bytes_read=2249706 bytes_retransmit=0 bytes_invalid=0 send_seq=134393 receive_seq=134393 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=5744 freq=180001404 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28108 bytes_read=88485 bytes_retransmit=0 bytes_invalid=0 send_seq=4659 receive_seq=4659 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999258 sd_pos=1222222 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.69 cputime=606.101 memavail=694008 print_time=4907.183 buffer_time=2.438 print_stall=0 extruder: target=220 temp=220.1 pwm=0.567
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4904.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6125864 bytes_read=2250840 bytes_retransmit=0 bytes_invalid=0 send_seq=134528 receive_seq=134528 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=4791 freq=180001423 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28114 bytes_read=88501 bytes_retransmit=0 bytes_invalid=0 send_seq=4660 receive_seq=4660 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999272 sd_pos=1225049 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=43.5 mcu_temp: temp=37.7 chamber: temp=29.9 sysload=0.69 cputime=606.480 memavail=694028 print_time=4908.222 buffer_time=2.284 print_stall=0 extruder: target=220 temp=220.0 pwm=0.567
Stats 4905.7: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6132325 bytes_read=2251791 bytes_retransmit=0 bytes_invalid=0 send_seq=134638 receive_seq=134638 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=4129 freq=180001414 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28120 bytes_read=88530 bytes_retransmit=0 bytes_invalid=0 send_seq=4661 receive_seq=4661 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999201 sd_pos=1227390 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.72 cputime=606.665 memavail=694028 print_time=4909.070 buffer_time=2.130 print_stall=0 extruder: target=220 temp=220.0 pwm=0.567
Stats 4906.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6138757 bytes_read=2252789 bytes_retransmit=0 bytes_invalid=0 send_seq=134749 receive_seq=134749 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=4610 freq=180001401 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28126 bytes_read=88546 bytes_retransmit=0 bytes_invalid=0 send_seq=4662 receive_seq=4662 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999236 sd_pos=1230260 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.72 cputime=606.932 memavail=693916 print_time=4910.196 buffer_time=2.256 print_stall=0 extruder: target=220 temp=220.0 pwm=0.577
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4907.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6145516 bytes_read=2253808 bytes_retransmit=0 bytes_invalid=0 send_seq=134864 receive_seq=134864 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=5144 freq=180001419 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28132 bytes_read=88562 bytes_retransmit=0 bytes_invalid=0 send_seq=4663 receive_seq=4663 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999294 sd_pos=1232912 heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.72 cputime=607.305 memavail=694032 print_time=4911.157 buffer_time=2.216 print_stall=0 extruder: target=220 temp=220.1 pwm=0.577
Stats 4908.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6151764 bytes_read=2254744 bytes_retransmit=0 bytes_invalid=0 send_seq=134971 receive_seq=134971 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=5510 freq=180001410 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28138 bytes_read=88578 bytes_retransmit=0 bytes_invalid=0 send_seq=4664 receive_seq=4664 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999219 sd_pos=1235638 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.72 cputime=607.525 memavail=694032 print_time=4912.206 buffer_time=2.264 print_stall=0 extruder: target=220 temp=220.1 pwm=0.577
Stats 4909.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6159136 bytes_read=2255801 bytes_retransmit=0 bytes_invalid=0 send_seq=135097 receive_seq=135097 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4829 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28144 bytes_read=88594 bytes_retransmit=0 bytes_invalid=0 send_seq=4665 receive_seq=4665 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999242 sd_pos=1238514 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.72 cputime=607.795 memavail=693856 print_time=4913.235 buffer_time=2.293 print_stall=0 extruder: target=220 temp=220.1 pwm=0.577
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4910.7: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6165774 bytes_read=2256810 bytes_retransmit=0 bytes_invalid=0 send_seq=135210 receive_seq=135210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=3831 freq=180001402 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28150 bytes_read=88623 bytes_retransmit=0 bytes_invalid=0 send_seq=4666 receive_seq=4666 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999241 sd_pos=1240626 heater_bed: target=60 temp=59.9 pwm=0.203 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.66 cputime=608.102 memavail=694040 print_time=4913.972 buffer_time=2.029 print_stall=0 extruder: target=220 temp=220.2 pwm=0.528
Stats 4911.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6171775 bytes_read=2257732 bytes_retransmit=0 bytes_invalid=0 send_seq=135312 receive_seq=135311 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4737 freq=180001401 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28156 bytes_read=88639 bytes_retransmit=0 bytes_invalid=0 send_seq=4667 receive_seq=4667 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999194 sd_pos=1243722 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.66 cputime=608.332 memavail=694040 print_time=4915.267 buffer_time=2.324 print_stall=0 extruder: target=220 temp=220.2 pwm=0.528
Stats 4912.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6179210 bytes_read=2258804 bytes_retransmit=0 bytes_invalid=0 send_seq=135440 receive_seq=135440 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2786 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28162 bytes_read=88655 bytes_retransmit=0 bytes_invalid=0 send_seq=4668 receive_seq=4668 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999205 sd_pos=1246018 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.66 cputime=608.522 memavail=693612 print_time=4916.207 buffer_time=2.263 print_stall=0 extruder: target=220 temp=220.3 pwm=0.528
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4914.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6186491 bytes_read=2259918 bytes_retransmit=0 bytes_invalid=0 send_seq=135565 receive_seq=135564 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=7588 freq=180001383 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28168 bytes_read=88671 bytes_retransmit=0 bytes_invalid=0 send_seq=4669 receive_seq=4669 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999249 sd_pos=1249792 heater_bed: target=60 temp=59.9 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.66 cputime=609.175 memavail=693612 print_time=4918.005 buffer_time=2.767 print_stall=0 extruder: target=220 temp=220.1 pwm=0.578
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4915.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6192043 bytes_read=2260801 bytes_retransmit=0 bytes_invalid=0 send_seq=135663 receive_seq=135663 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=5294 freq=180001374 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28174 bytes_read=88687 bytes_retransmit=0 bytes_invalid=0 send_seq=4670 receive_seq=4670 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999241 sd_pos=1250495 heater_bed: target=60 temp=59.9 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.77 cputime=609.474 memavail=693792 print_time=4918.284 buffer_time=2.046 print_stall=0 extruder: target=220 temp=220.0 pwm=0.578
Stats 4916.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6199470 bytes_read=2261853 bytes_retransmit=0 bytes_invalid=0 send_seq=135788 receive_seq=135788 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=2263 freq=180001366 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28180 bytes_read=88716 bytes_retransmit=0 bytes_invalid=0 send_seq=4671 receive_seq=4671 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999284 sd_pos=1251177 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.9 sysload=0.77 cputime=609.650 memavail=693552 print_time=4919.627 buffer_time=2.388 print_stall=0 extruder: target=220 temp=220.0 pwm=0.578
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4917.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6207241 bytes_read=2262973 bytes_retransmit=0 bytes_invalid=0 send_seq=135920 receive_seq=135920 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=6397 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28186 bytes_read=88732 bytes_retransmit=0 bytes_invalid=0 send_seq=4672 receive_seq=4672 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999294 sd_pos=1253555 heater_bed: target=60 temp=59.9 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.0 sysload=0.77 cputime=610.139 memavail=693552 print_time=4921.265 buffer_time=3.025 print_stall=0 extruder: target=220 temp=219.9 pwm=0.578
Stats 4918.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6210484 bytes_read=2263680 bytes_retransmit=0 bytes_invalid=0 send_seq=135979 receive_seq=135979 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=3711 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28192 bytes_read=88748 bytes_retransmit=0 bytes_invalid=0 send_seq=4673 receive_seq=4673 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999283 sd_pos=1253555 heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.77 cputime=610.251 memavail=693552 print_time=4921.265 buffer_time=2.025 print_stall=0 extruder: target=220 temp=219.8 pwm=0.595
Stats 4919.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6214523 bytes_read=2264466 bytes_retransmit=0 bytes_invalid=0 send_seq=136053 receive_seq=136053 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=4452 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28198 bytes_read=88764 bytes_retransmit=0 bytes_invalid=0 send_seq=4674 receive_seq=4674 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999306 sd_pos=1254681 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=30.1 sysload=0.77 cputime=610.438 memavail=693692 print_time=4922.636 buffer_time=2.395 print_stall=0 extruder: target=220 temp=219.8 pwm=0.595
Stats 4920.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6222353 bytes_read=2265570 bytes_retransmit=0 bytes_invalid=0 send_seq=136185 receive_seq=136185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28204 bytes_read=88780 bytes_retransmit=0 bytes_invalid=0 send_seq=4675 receive_seq=4675 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999276 sd_pos=1255063 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.79 cputime=610.572 memavail=693808 print_time=4923.361 buffer_time=2.120 print_stall=0 extruder: target=220 temp=219.8 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4921.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6227720 bytes_read=2266482 bytes_retransmit=0 bytes_invalid=0 send_seq=136285 receive_seq=136285 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=6577 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28210 bytes_read=88809 bytes_retransmit=0 bytes_invalid=0 send_seq=4676 receive_seq=4676 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999290 sd_pos=1257713 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=30.0 sysload=0.79 cputime=611.248 memavail=693808 print_time=4924.963 buffer_time=2.720 print_stall=0 extruder: target=220 temp=219.9 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4922.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6231657 bytes_read=2267295 bytes_retransmit=0 bytes_invalid=0 send_seq=136359 receive_seq=136359 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=6941 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28216 bytes_read=88825 bytes_retransmit=0 bytes_invalid=0 send_seq=4677 receive_seq=4677 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999266 sd_pos=1258687 heater_bed: target=60 temp=59.9 pwm=0.154 raspberry_pi: temp=43.5 mcu_temp: temp=37.8 chamber: temp=30.1 sysload=0.79 cputime=611.578 memavail=693704 print_time=4925.407 buffer_time=2.163 print_stall=0 extruder: target=220 temp=219.9 pwm=0.595
Stats 4923.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6238658 bytes_read=2268344 bytes_retransmit=0 bytes_invalid=0 send_seq=136481 receive_seq=136480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=4607 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28222 bytes_read=88841 bytes_retransmit=0 bytes_invalid=0 send_seq=4678 receive_seq=4678 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999242 sd_pos=1259436 heater_bed: target=60 temp=59.9 pwm=0.162 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.79 cputime=611.765 memavail=693816 print_time=4926.718 buffer_time=2.473 print_stall=0 extruder: target=220 temp=220.0 pwm=0.570
Stats 4924.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6245952 bytes_read=2269376 bytes_retransmit=0 bytes_invalid=0 send_seq=136604 receive_seq=136604 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28228 bytes_read=88857 bytes_retransmit=0 bytes_invalid=0 send_seq=4679 receive_seq=4679 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999291 sd_pos=1259603 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.79 cputime=611.956 memavail=693816 print_time=4927.414 buffer_time=2.169 print_stall=0 extruder: target=220 temp=220.0 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4925.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6251766 bytes_read=2270356 bytes_retransmit=0 bytes_invalid=0 send_seq=136711 receive_seq=136711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=9834 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28234 bytes_read=88873 bytes_retransmit=0 bytes_invalid=0 send_seq=4680 receive_seq=4680 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999295 sd_pos=1262995 heater_bed: target=60 temp=59.8 pwm=0.237 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.88 cputime=612.555 memavail=694072 print_time=4929.623 buffer_time=3.352 print_stall=0 extruder: target=220 temp=219.9 pwm=0.570
Stats 4926.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6255481 bytes_read=2271142 bytes_retransmit=0 bytes_invalid=0 send_seq=136783 receive_seq=136783 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=6711 freq=180001353 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28240 bytes_read=88902 bytes_retransmit=0 bytes_invalid=0 send_seq=4681 receive_seq=4681 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999265 sd_pos=1262995 heater_bed: target=60 temp=59.8 pwm=0.227 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.88 cputime=612.641 memavail=694072 print_time=4929.623 buffer_time=2.352 print_stall=0 extruder: target=220 temp=219.8 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4927.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6258869 bytes_read=2271895 bytes_retransmit=0 bytes_invalid=0 send_seq=136849 receive_seq=136848 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=13884 freq=180001360 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28246 bytes_read=88918 bytes_retransmit=0 bytes_invalid=0 send_seq=4682 receive_seq=4682 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999254 sd_pos=1264986 heater_bed: target=60 temp=59.9 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.88 cputime=613.338 memavail=694068 print_time=4930.764 buffer_time=2.492 print_stall=0 extruder: target=220 temp=219.8 pwm=0.610
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4928.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6269401 bytes_read=2273225 bytes_retransmit=0 bytes_invalid=0 send_seq=137025 receive_seq=137025 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=17475 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28252 bytes_read=88934 bytes_retransmit=0 bytes_invalid=0 send_seq=4683 receive_seq=4683 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999242 sd_pos=1268269 heater_bed: target=60 temp=59.9 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.88 cputime=613.661 memavail=694084 print_time=4932.221 buffer_time=2.948 print_stall=0 extruder: target=220 temp=219.7 pwm=0.610
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4929.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6280401 bytes_read=2274565 bytes_retransmit=0 bytes_invalid=0 send_seq=137210 receive_seq=137210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=7610 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28258 bytes_read=88950 bytes_retransmit=0 bytes_invalid=0 send_seq=4684 receive_seq=4684 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999279 sd_pos=1269743 heater_bed: target=60 temp=59.9 pwm=0.165 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.88 cputime=614.014 memavail=694084 print_time=4932.221 buffer_time=1.835 print_stall=0 extruder: target=220 temp=219.7 pwm=0.610
Stats 4930.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6289863 bytes_read=2275800 bytes_retransmit=0 bytes_invalid=0 send_seq=137368 receive_seq=137368 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=9118 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28264 bytes_read=88966 bytes_retransmit=0 bytes_invalid=0 send_seq=4685 receive_seq=4685 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999292 sd_pos=1270340 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.89 cputime=614.182 memavail=694084 print_time=4933.408 buffer_time=2.022 print_stall=0 extruder: target=220 temp=219.6 pwm=0.662
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4931.2: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6300172 bytes_read=2277085 bytes_retransmit=0 bytes_invalid=0 send_seq=137542 receive_seq=137542 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=11537 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28270 bytes_read=88995 bytes_retransmit=0 bytes_invalid=0 send_seq=4686 receive_seq=4686 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999292 sd_pos=1273286 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.89 cputime=614.489 memavail=694096 print_time=4934.719 buffer_time=2.332 print_stall=0 extruder: target=220 temp=219.7 pwm=0.662
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4932.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6309491 bytes_read=2278303 bytes_retransmit=0 bytes_invalid=0 send_seq=137700 receive_seq=137700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=11504 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28276 bytes_read=89011 bytes_retransmit=0 bytes_invalid=0 send_seq=4687 receive_seq=4687 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999256 sd_pos=1274836 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.89 cputime=615.108 memavail=694096 print_time=4935.955 buffer_time=2.567 print_stall=0 extruder: target=220 temp=219.8 pwm=0.583
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4933.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6319368 bytes_read=2279573 bytes_retransmit=0 bytes_invalid=0 send_seq=137865 receive_seq=137865 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=11355 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28282 bytes_read=89027 bytes_retransmit=0 bytes_invalid=0 send_seq=4688 receive_seq=4688 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999243 sd_pos=1277399 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.89 cputime=615.405 memavail=694096 print_time=4937.038 buffer_time=2.649 print_stall=0 extruder: target=220 temp=220.1 pwm=0.583
Stats 4934.2: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6326696 bytes_read=2280613 bytes_retransmit=0 bytes_invalid=0 send_seq=137990 receive_seq=137990 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=7310 freq=180001366 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28288 bytes_read=89043 bytes_retransmit=0 bytes_invalid=0 send_seq=4689 receive_seq=4689 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999219 sd_pos=1278422 heater_bed: target=60 temp=59.9 pwm=0.184 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.89 cputime=615.621 memavail=693676 print_time=4937.484 buffer_time=2.094 print_stall=0 extruder: target=220 temp=220.5 pwm=0.489
Stats 4935.3: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6337517 bytes_read=2281948 bytes_retransmit=0 bytes_invalid=0 send_seq=138171 receive_seq=138171 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=6060 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28294 bytes_read=89059 bytes_retransmit=0 bytes_invalid=0 send_seq=4690 receive_seq=4690 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999200 sd_pos=1282348 heater_bed: target=60 temp=59.9 pwm=0.129 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.90 cputime=615.935 memavail=693848 print_time=4939.023 buffer_time=2.559 print_stall=0 extruder: target=220 temp=220.6 pwm=0.489
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4936.5: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6345214 bytes_read=2283057 bytes_retransmit=0 bytes_invalid=0 send_seq=138301 receive_seq=138301 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=36 stalled_bytes=5599 freq=180001349 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28300 bytes_read=89088 bytes_retransmit=0 bytes_invalid=0 send_seq=4691 receive_seq=4691 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999214 sd_pos=1284910 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.90 cputime=616.328 memavail=693736 print_time=4940.015 buffer_time=2.349 print_stall=0 extruder: target=220 temp=220.6 pwm=0.519
Stats 4937.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6351651 bytes_read=2284045 bytes_retransmit=0 bytes_invalid=0 send_seq=138411 receive_seq=138410 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4781 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28306 bytes_read=89104 bytes_retransmit=0 bytes_invalid=0 send_seq=4692 receive_seq=4692 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999209 sd_pos=1287414 heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.90 cputime=616.522 memavail=693848 print_time=4940.897 buffer_time=2.229 print_stall=0 extruder: target=220 temp=220.4 pwm=0.519
Stats 4938.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6358353 bytes_read=2285033 bytes_retransmit=0 bytes_invalid=0 send_seq=138528 receive_seq=138528 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=5057 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28312 bytes_read=89120 bytes_retransmit=0 bytes_invalid=0 send_seq=4693 receive_seq=4693 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999225 sd_pos=1290220 heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.90 cputime=616.736 memavail=693848 print_time=4941.950 buffer_time=2.282 print_stall=0 extruder: target=220 temp=220.3 pwm=0.569
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4939.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6365004 bytes_read=2286032 bytes_retransmit=0 bytes_invalid=0 send_seq=138640 receive_seq=138640 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=4580 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28318 bytes_read=89136 bytes_retransmit=0 bytes_invalid=0 send_seq=4694 receive_seq=4694 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999254 sd_pos=1292626 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.90 cputime=617.050 memavail=693848 print_time=4942.786 buffer_time=2.117 print_stall=0 extruder: target=220 temp=220.1 pwm=0.569
Stats 4940.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6371388 bytes_read=2286997 bytes_retransmit=0 bytes_invalid=0 send_seq=138750 receive_seq=138750 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=4529 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28324 bytes_read=89152 bytes_retransmit=0 bytes_invalid=0 send_seq=4695 receive_seq=4695 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999232 sd_pos=1295365 heater_bed: target=60 temp=59.9 pwm=0.171 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.91 cputime=617.295 memavail=693964 print_time=4943.828 buffer_time=2.158 print_stall=0 extruder: target=220 temp=219.9 pwm=0.637
Stats 4941.5: gcodein=0  mcu: mcu_awake=0.022 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6378668 bytes_read=2288029 bytes_retransmit=0 bytes_invalid=0 send_seq=138874 receive_seq=138874 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=4123 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=28330 bytes_read=89181 bytes_retransmit=0 bytes_invalid=0 send_seq=4696 receive_seq=4696 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999616 adj=49999228 sd_pos=1298248 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=0.91 cputime=617.521 memavail=693964 print_time=4944.851 buffer_time=2.181 print_stall=0 extruder: target=220 temp=219.8 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4942.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=6384869 bytes_read=2289010 bytes_retransmit=0 bytes_invalid=0 send_seq=138978 receive_seq=138978 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=4198 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=28336 bytes_read=89197 bytes_retransmit=0 bytes_invalid=0 send_seq=4697 receive_seq=4697 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999616 adj=49999227 sd_pos=1300576 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.91 cputime=617.860 memavail=694164 print_time=4945.876 buffer_time=2.205 print_stall=0 extruder: target=220 temp=219.8 pwm=0.575
Stats 4943.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=6391615 bytes_read=2290005 bytes_retransmit=0 bytes_invalid=0 send_seq=139095 receive_seq=139094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=2520 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=28342 bytes_read=89213 bytes_retransmit=0 bytes_invalid=0 send_seq=4698 receive_seq=4698 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999243 sd_pos=1302866 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.91 cputime=618.098 memavail=694252 print_time=4946.818 buffer_time=2.146 print_stall=0 extruder: target=220 temp=220.0 pwm=0.575
Stats 4944.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=6398028 bytes_read=2290982 bytes_retransmit=0 bytes_invalid=0 send_seq=139207 receive_seq=139207 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=1973 freq=180001355 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=28348 bytes_read=89229 bytes_retransmit=0 bytes_invalid=0 send_seq=4699 receive_seq=4699 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999354 sd_pos=1305364 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.9 sysload=0.91 cputime=618.312 memavail=694260 print_time=4947.759 buffer_time=2.086 print_stall=0 extruder: target=220 temp=220.2 pwm=0.509
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4945.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=6403352 bytes_read=2291902 bytes_retransmit=0 bytes_invalid=0 send_seq=139302 receive_seq=139302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=3526 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000011 bytes_write=28354 bytes_read=89245 bytes_retransmit=0 bytes_invalid=0 send_seq=4700 receive_seq=4700 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999335 sd_pos=1307730 heater_bed: target=60 temp=59.9 pwm=0.227 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.00 cputime=618.848 memavail=693856 print_time=4948.710 buffer_time=2.031 print_stall=0 extruder: target=220 temp=220.2 pwm=0.509
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4946.5: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=6409338 bytes_read=2292853 bytes_retransmit=0 bytes_invalid=0 send_seq=139407 receive_seq=139407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=6845 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28360 bytes_read=89274 bytes_retransmit=0 bytes_invalid=0 send_seq=4701 receive_seq=4701 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999341 sd_pos=1309661 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.00 cputime=619.238 memavail=694008 print_time=4949.955 buffer_time=2.276 print_stall=0 extruder: target=220 temp=220.3 pwm=0.509
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4947.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6416898 bytes_read=2293905 bytes_retransmit=0 bytes_invalid=0 send_seq=139534 receive_seq=139534 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=3763 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28366 bytes_read=89289 bytes_retransmit=0 bytes_invalid=0 send_seq=4702 receive_seq=4702 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999287 sd_pos=1310058 heater_bed: target=60 temp=60.0 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.00 cputime=619.503 memavail=694020 print_time=4950.971 buffer_time=2.292 print_stall=0 extruder: target=220 temp=220.1 pwm=0.575
Stats 4948.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6424132 bytes_read=2294960 bytes_retransmit=0 bytes_invalid=0 send_seq=139656 receive_seq=139656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=78 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28372 bytes_read=89304 bytes_retransmit=0 bytes_invalid=0 send_seq=4703 receive_seq=4703 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999281 sd_pos=1310794 heater_bed: target=60 temp=60.0 pwm=0.153 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.00 cputime=619.698 memavail=693624 print_time=4952.033 buffer_time=2.353 print_stall=0 extruder: target=220 temp=220.0 pwm=0.575
Stats 4949.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6427415 bytes_read=2295695 bytes_retransmit=0 bytes_invalid=0 send_seq=139720 receive_seq=139720 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28378 bytes_read=89319 bytes_retransmit=0 bytes_invalid=0 send_seq=4704 receive_seq=4704 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999196 sd_pos=1311181 heater_bed: target=60 temp=60.1 pwm=0.101 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.00 cputime=619.848 memavail=693776 print_time=4952.757 buffer_time=2.076 print_stall=0 extruder: target=220 temp=219.8 pwm=0.575
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4950.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6432816 bytes_read=2296607 bytes_retransmit=0 bytes_invalid=0 send_seq=139820 receive_seq=139820 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=7292 freq=180001394 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28384 bytes_read=89334 bytes_retransmit=0 bytes_invalid=0 send_seq=4705 receive_seq=4705 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999247 sd_pos=1314140 heater_bed: target=60 temp=60.1 pwm=0.101 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=1.08 cputime=620.358 memavail=693776 print_time=4954.415 buffer_time=2.733 print_stall=0 extruder: target=220 temp=219.6 pwm=0.626
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4951.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6436724 bytes_read=2297443 bytes_retransmit=0 bytes_invalid=0 send_seq=139896 receive_seq=139896 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=20416 freq=180001393 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28390 bytes_read=89362 bytes_retransmit=0 bytes_invalid=0 send_seq=4706 receive_seq=4706 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999248 sd_pos=1317718 heater_bed: target=60 temp=60.1 pwm=0.101 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=1.08 cputime=620.725 memavail=693672 print_time=4956.102 buffer_time=3.418 print_stall=0 extruder: target=220 temp=219.6 pwm=0.626
Stats 4952.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6443959 bytes_read=2298504 bytes_retransmit=0 bytes_invalid=0 send_seq=140023 receive_seq=140022 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=14022 freq=180001423 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28396 bytes_read=89378 bytes_retransmit=0 bytes_invalid=0 send_seq=4707 receive_seq=4707 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999246 sd_pos=1317718 heater_bed: target=60 temp=60.2 pwm=0.101 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.08 cputime=620.843 memavail=693532 print_time=4956.102 buffer_time=2.417 print_stall=0 extruder: target=220 temp=219.7 pwm=0.626
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4953.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6455234 bytes_read=2299903 bytes_retransmit=0 bytes_invalid=0 send_seq=140211 receive_seq=140210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=15854 freq=180001423 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28402 bytes_read=89394 bytes_retransmit=0 bytes_invalid=0 send_seq=4708 receive_seq=4708 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999179 sd_pos=1320281 heater_bed: target=60 temp=60.2 pwm=0.149 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.08 cputime=621.814 memavail=693532 print_time=4957.380 buffer_time=2.537 print_stall=0 extruder: target=220 temp=219.8 pwm=0.566
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4954.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6466492 bytes_read=2301249 bytes_retransmit=0 bytes_invalid=0 send_seq=140399 receive_seq=140399 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=7988 freq=180001417 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28408 bytes_read=89410 bytes_retransmit=0 bytes_invalid=0 send_seq=4709 receive_seq=4709 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999169 sd_pos=1320752 heater_bed: target=60 temp=60.2 pwm=0.051 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.08 cputime=622.152 memavail=693384 print_time=4957.888 buffer_time=2.043 print_stall=0 extruder: target=220 temp=219.9 pwm=0.566
Stats 4955.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6476947 bytes_read=2302561 bytes_retransmit=0 bytes_invalid=0 send_seq=140576 receive_seq=140576 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=2247 freq=180001407 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28414 bytes_read=89426 bytes_retransmit=0 bytes_invalid=0 send_seq=4710 receive_seq=4710 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999163 sd_pos=1321442 heater_bed: target=60 temp=60.2 pwm=0.123 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.15 cputime=622.347 memavail=693544 print_time=4959.124 buffer_time=2.279 print_stall=0 extruder: target=220 temp=220.0 pwm=0.566
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4956.7: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6484862 bytes_read=2303675 bytes_retransmit=0 bytes_invalid=0 send_seq=140710 receive_seq=140710 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=3928 freq=180001402 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28420 bytes_read=89455 bytes_retransmit=0 bytes_invalid=0 send_seq=4711 receive_seq=4711 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999162 sd_pos=1322931 heater_bed: target=60 temp=60.3 pwm=0.065 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.15 cputime=622.690 memavail=693544 print_time=4961.242 buffer_time=3.381 print_stall=0 extruder: target=220 temp=220.1 pwm=0.569
Stats 4957.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6487695 bytes_read=2304358 bytes_retransmit=0 bytes_invalid=0 send_seq=140761 receive_seq=140761 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1593 freq=180001443 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28426 bytes_read=89471 bytes_retransmit=0 bytes_invalid=0 send_seq=4712 receive_seq=4712 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999201 sd_pos=1322931 heater_bed: target=60 temp=60.2 pwm=0.148 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.15 cputime=622.818 memavail=694292 print_time=4961.242 buffer_time=2.380 print_stall=0 extruder: target=220 temp=220.0 pwm=0.569
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4958.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6491599 bytes_read=2305154 bytes_retransmit=0 bytes_invalid=0 send_seq=140832 receive_seq=140832 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=7870 freq=180001443 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28432 bytes_read=89487 bytes_retransmit=0 bytes_invalid=0 send_seq=4713 receive_seq=4713 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999129 sd_pos=1325221 heater_bed: target=60 temp=60.3 pwm=0.067 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.15 cputime=623.206 memavail=694300 print_time=4962.389 buffer_time=2.526 print_stall=0 extruder: target=220 temp=220.0 pwm=0.569
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4959.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6495956 bytes_read=2305994 bytes_retransmit=0 bytes_invalid=0 send_seq=140914 receive_seq=140914 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=8607 freq=180001462 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28438 bytes_read=89503 bytes_retransmit=0 bytes_invalid=0 send_seq=4714 receive_seq=4714 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999152 sd_pos=1326128 heater_bed: target=60 temp=60.3 pwm=0.125 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.15 cputime=623.541 memavail=694300 print_time=4963.035 buffer_time=2.172 print_stall=0 extruder: target=220 temp=220.0 pwm=0.569
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4960.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6505226 bytes_read=2307175 bytes_retransmit=0 bytes_invalid=0 send_seq=141070 receive_seq=141070 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=9484 freq=180001451 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28444 bytes_read=89519 bytes_retransmit=0 bytes_invalid=0 send_seq=4715 receive_seq=4715 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999108 sd_pos=1328219 heater_bed: target=60 temp=60.3 pwm=0.125 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.22 cputime=624.033 memavail=693640 print_time=4964.194 buffer_time=2.328 print_stall=0 extruder: target=220 temp=219.9 pwm=0.619
Stats 4961.7: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6514047 bytes_read=2308343 bytes_retransmit=0 bytes_invalid=0 send_seq=141216 receive_seq=141216 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=18920 freq=180001443 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28450 bytes_read=89548 bytes_retransmit=0 bytes_invalid=0 send_seq=4716 receive_seq=4716 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999124 sd_pos=1332314 heater_bed: target=60 temp=60.2 pwm=0.125 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.22 cputime=624.296 memavail=693808 print_time=4965.966 buffer_time=3.097 print_stall=0 extruder: target=220 temp=219.8 pwm=0.619
Stats 4962.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6522415 bytes_read=2309486 bytes_retransmit=0 bytes_invalid=0 send_seq=141359 receive_seq=141359 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=11486 freq=180001433 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28456 bytes_read=89564 bytes_retransmit=0 bytes_invalid=0 send_seq=4717 receive_seq=4717 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999169 sd_pos=1332314 heater_bed: target=60 temp=60.2 pwm=0.125 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.22 cputime=624.449 memavail=693808 print_time=4965.966 buffer_time=2.090 print_stall=0 extruder: target=220 temp=219.8 pwm=0.619
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4963.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6533138 bytes_read=2310787 bytes_retransmit=0 bytes_invalid=0 send_seq=141539 receive_seq=141539 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=6056 freq=180001424 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28462 bytes_read=89580 bytes_retransmit=0 bytes_invalid=0 send_seq=4718 receive_seq=4718 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999215 sd_pos=1333124 heater_bed: target=60 temp=60.3 pwm=0.050 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.22 cputime=624.779 memavail=693704 print_time=4967.179 buffer_time=2.295 print_stall=0 extruder: target=220 temp=219.9 pwm=0.619
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4964.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6544116 bytes_read=2312152 bytes_retransmit=0 bytes_invalid=0 send_seq=141723 receive_seq=141723 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2045 freq=180001424 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28468 bytes_read=89596 bytes_retransmit=0 bytes_invalid=0 send_seq=4719 receive_seq=4719 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999226 sd_pos=1334834 heater_bed: target=60 temp=60.3 pwm=0.121 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=1.22 cputime=625.339 memavail=693808 print_time=4968.178 buffer_time=2.293 print_stall=0 extruder: target=220 temp=220.0 pwm=0.563
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4965.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6548874 bytes_read=2312987 bytes_retransmit=0 bytes_invalid=0 send_seq=141807 receive_seq=141807 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=2085 freq=180001413 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28474 bytes_read=89612 bytes_retransmit=0 bytes_invalid=0 send_seq=4720 receive_seq=4720 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999216 sd_pos=1336005 heater_bed: target=60 temp=60.2 pwm=0.123 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=1.20 cputime=625.583 memavail=693808 print_time=4968.988 buffer_time=2.102 print_stall=0 extruder: target=220 temp=220.2 pwm=0.563
Stats 4966.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6553508 bytes_read=2313819 bytes_retransmit=0 bytes_invalid=0 send_seq=141892 receive_seq=141891 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=6030 freq=180001423 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28480 bytes_read=89641 bytes_retransmit=0 bytes_invalid=0 send_seq=4721 receive_seq=4721 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999626 adj=49999230 sd_pos=1339626 heater_bed: target=60 temp=60.3 pwm=0.072 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.20 cputime=625.852 memavail=693704 print_time=4970.361 buffer_time=2.467 print_stall=0 extruder: target=220 temp=220.3 pwm=0.506
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4967.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6560924 bytes_read=2314924 bytes_retransmit=0 bytes_invalid=0 send_seq=142017 receive_seq=142017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=5844 freq=180001421 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28486 bytes_read=89657 bytes_retransmit=0 bytes_invalid=0 send_seq=4722 receive_seq=4722 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999174 sd_pos=1342519 heater_bed: target=60 temp=60.2 pwm=0.072 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.20 cputime=626.229 memavail=693820 print_time=4971.444 buffer_time=2.431 print_stall=0 extruder: target=220 temp=220.5 pwm=0.506
Stats 4968.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6567642 bytes_read=2315911 bytes_retransmit=0 bytes_invalid=0 send_seq=142132 receive_seq=142132 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=4574 freq=180001418 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28492 bytes_read=89673 bytes_retransmit=0 bytes_invalid=0 send_seq=4723 receive_seq=4723 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999168 sd_pos=1344822 heater_bed: target=60 temp=60.2 pwm=0.072 raspberry_pi: temp=42.9 mcu_temp: temp=37.7 chamber: temp=29.7 sysload=1.20 cputime=626.436 memavail=693820 print_time=4972.217 buffer_time=2.203 print_stall=0 extruder: target=220 temp=220.3 pwm=0.506
Stats 4969.8: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6573683 bytes_read=2316876 bytes_retransmit=0 bytes_invalid=0 send_seq=142236 receive_seq=142236 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=5254 freq=180001425 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28498 bytes_read=89689 bytes_retransmit=0 bytes_invalid=0 send_seq=4724 receive_seq=4724 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999176 sd_pos=1347367 heater_bed: target=60 temp=60.2 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.20 cputime=626.641 memavail=693448 print_time=4973.308 buffer_time=2.293 print_stall=0 extruder: target=220 temp=220.2 pwm=0.585
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4970.9: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6581378 bytes_read=2317946 bytes_retransmit=0 bytes_invalid=0 send_seq=142368 receive_seq=142367 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=4623 freq=180001415 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28504 bytes_read=89705 bytes_retransmit=0 bytes_invalid=0 send_seq=4725 receive_seq=4725 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999134 sd_pos=1350249 heater_bed: target=60 temp=60.2 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.19 cputime=627.023 memavail=693580 print_time=4974.359 buffer_time=2.295 print_stall=0 extruder: target=220 temp=219.9 pwm=0.585
Stats 4971.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6587695 bytes_read=2318947 bytes_retransmit=0 bytes_invalid=0 send_seq=142476 receive_seq=142475 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=4422 freq=180001422 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28510 bytes_read=89734 bytes_retransmit=0 bytes_invalid=0 send_seq=4726 receive_seq=4726 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999170 sd_pos=1352532 heater_bed: target=60 temp=60.2 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.19 cputime=627.237 memavail=693580 print_time=4975.234 buffer_time=2.170 print_stall=0 extruder: target=220 temp=219.8 pwm=0.640
Stats 4972.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6593921 bytes_read=2319913 bytes_retransmit=0 bytes_invalid=0 send_seq=142583 receive_seq=142583 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=4395 freq=180001409 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28516 bytes_read=89750 bytes_retransmit=0 bytes_invalid=0 send_seq=4727 receive_seq=4727 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999140 sd_pos=1355231 heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.19 cputime=627.436 memavail=693364 print_time=4976.269 buffer_time=2.204 print_stall=0 extruder: target=220 temp=219.8 pwm=0.640
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4973.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6600938 bytes_read=2320909 bytes_retransmit=0 bytes_invalid=0 send_seq=142702 receive_seq=142702 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=3341 freq=180001410 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28522 bytes_read=89766 bytes_retransmit=0 bytes_invalid=0 send_seq=4728 receive_seq=4728 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999189 sd_pos=1357490 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.19 cputime=627.800 memavail=693580 print_time=4977.152 buffer_time=2.086 print_stall=0 extruder: target=220 temp=219.8 pwm=0.640
Stats 4974.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6607121 bytes_read=2321869 bytes_retransmit=0 bytes_invalid=0 send_seq=142808 receive_seq=142808 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=3789 freq=180001406 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28528 bytes_read=89782 bytes_retransmit=0 bytes_invalid=0 send_seq=4729 receive_seq=4729 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999192 sd_pos=1360024 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.19 cputime=628.091 memavail=693580 print_time=4978.304 buffer_time=2.237 print_stall=0 extruder: target=220 temp=219.8 pwm=0.574
Stats 4975.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6613476 bytes_read=2322860 bytes_retransmit=0 bytes_invalid=0 send_seq=142918 receive_seq=142918 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2594 freq=180001401 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28534 bytes_read=89798 bytes_retransmit=0 bytes_invalid=0 send_seq=4730 receive_seq=4730 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999252 sd_pos=1362232 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.17 cputime=628.341 memavail=693580 print_time=4979.258 buffer_time=2.190 print_stall=0 extruder: target=220 temp=220.2 pwm=0.495
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4977.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6620402 bytes_read=2323925 bytes_retransmit=0 bytes_invalid=0 send_seq=143036 receive_seq=143036 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=5591 freq=180001398 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28540 bytes_read=89827 bytes_retransmit=0 bytes_invalid=0 send_seq=4731 receive_seq=4731 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999267 sd_pos=1365114 heater_bed: target=60 temp=60.1 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.17 cputime=628.893 memavail=690716 print_time=4980.573 buffer_time=2.347 print_stall=0 extruder: target=220 temp=220.4 pwm=0.495
Stats 4978.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6625681 bytes_read=2324781 bytes_retransmit=0 bytes_invalid=0 send_seq=143127 receive_seq=143127 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=4678 freq=180001394 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28546 bytes_read=89843 bytes_retransmit=0 bytes_invalid=0 send_seq=4732 receive_seq=4732 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999266 sd_pos=1366135 heater_bed: target=60 temp=60.0 pwm=0.185 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.6 sysload=1.17 cputime=629.075 memavail=693340 print_time=4981.852 buffer_time=2.625 print_stall=0 extruder: target=220 temp=220.4 pwm=0.495
Stats 4979.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6632931 bytes_read=2325828 bytes_retransmit=0 bytes_invalid=0 send_seq=143251 receive_seq=143251 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28552 bytes_read=89859 bytes_retransmit=0 bytes_invalid=0 send_seq=4733 receive_seq=4733 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999265 sd_pos=1366302 heater_bed: target=60 temp=59.9 pwm=0.208 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=1.17 cputime=629.218 memavail=693236 print_time=4982.549 buffer_time=2.320 print_stall=0 extruder: target=220 temp=220.3 pwm=0.495
Stats 4980.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6635432 bytes_read=2326537 bytes_retransmit=0 bytes_invalid=0 send_seq=143304 receive_seq=143304 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28558 bytes_read=89875 bytes_retransmit=0 bytes_invalid=0 send_seq=4734 receive_seq=4734 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999622 adj=49999269 sd_pos=1366827 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=1.17 cputime=629.397 memavail=693236 print_time=4983.408 buffer_time=2.178 print_stall=0 extruder: target=220 temp=220.1 pwm=0.566
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4981.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6638083 bytes_read=2327284 bytes_retransmit=0 bytes_invalid=0 send_seq=143361 receive_seq=143360 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=28570 bytes_read=89907 bytes_retransmit=0 bytes_invalid=0 send_seq=4736 receive_seq=4736 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999335 sd_pos=1368051 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.16 cputime=629.894 memavail=693348 print_time=4984.121 buffer_time=1.710 print_stall=0 extruder: target=220 temp=219.8 pwm=0.617
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4982.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6645560 bytes_read=2328381 bytes_retransmit=0 bytes_invalid=0 send_seq=143492 receive_seq=143491 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2087 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28576 bytes_read=89936 bytes_retransmit=0 bytes_invalid=0 send_seq=4737 receive_seq=4737 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999414 sd_pos=1369132 heater_bed: target=60 temp=59.9 pwm=0.198 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.9 sysload=1.16 cputime=630.176 memavail=693352 print_time=4985.698 buffer_time=2.286 print_stall=0 extruder: target=220 temp=219.6 pwm=0.639
Stats 4983.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6648263 bytes_read=2329038 bytes_retransmit=0 bytes_invalid=0 send_seq=143540 receive_seq=143540 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=2738 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28582 bytes_read=89952 bytes_retransmit=0 bytes_invalid=0 send_seq=4738 receive_seq=4738 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999330 sd_pos=1369601 heater_bed: target=60 temp=59.9 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=1.16 cputime=630.303 memavail=693344 print_time=4986.495 buffer_time=2.082 print_stall=0 extruder: target=220 temp=219.4 pwm=0.695
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4984.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6656095 bytes_read=2330143 bytes_retransmit=0 bytes_invalid=0 send_seq=143672 receive_seq=143672 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=7884 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28588 bytes_read=89968 bytes_retransmit=0 bytes_invalid=0 send_seq=4739 receive_seq=4739 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999302 sd_pos=1372523 heater_bed: target=60 temp=59.8 pwm=0.170 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=1.16 cputime=630.839 memavail=693344 print_time=4988.144 buffer_time=2.730 print_stall=0 extruder: target=220 temp=219.6 pwm=0.625
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4985.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6661650 bytes_read=2331126 bytes_retransmit=0 bytes_invalid=0 send_seq=143775 receive_seq=143773 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=11915 freq=180001370 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28594 bytes_read=89984 bytes_retransmit=0 bytes_invalid=0 send_seq=4740 receive_seq=4740 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999279 sd_pos=1374373 heater_bed: target=60 temp=59.9 pwm=0.107 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=1.14 cputime=631.499 memavail=693360 print_time=4989.161 buffer_time=2.508 print_stall=0 extruder: target=220 temp=219.8 pwm=0.625
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4986.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6670497 bytes_read=2332310 bytes_retransmit=0 bytes_invalid=0 send_seq=143931 receive_seq=143930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=14962 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28600 bytes_read=90013 bytes_retransmit=0 bytes_invalid=0 send_seq=4741 receive_seq=4741 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999237 sd_pos=1376664 heater_bed: target=60 temp=59.9 pwm=0.165 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=1.14 cputime=632.043 memavail=693360 print_time=4990.443 buffer_time=2.790 print_stall=0 extruder: target=220 temp=219.8 pwm=0.558
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 4987.6: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6680714 bytes_read=2333648 bytes_retransmit=0 bytes_invalid=0 send_seq=144103 receive_seq=144103 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=12706 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28606 bytes_read=90029 bytes_retransmit=0 bytes_invalid=0 send_seq=4742 receive_seq=4742 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999234 sd_pos=1378214 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.14 cputime=632.528 memavail=693164 print_time=4991.691 buffer_time=2.913 print_stall=0 extruder: target=220 temp=220.0 pwm=0.558
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4988.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6694177 bytes_read=2335222 bytes_retransmit=0 bytes_invalid=0 send_seq=144326 receive_seq=144326 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=10520 freq=180001421 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28612 bytes_read=90045 bytes_retransmit=0 bytes_invalid=0 send_seq=4743 receive_seq=4743 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999181 sd_pos=1380306 heater_bed: target=60 temp=59.9 pwm=0.139 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.9 sysload=1.14 cputime=633.089 memavail=693360 print_time=4992.866 buffer_time=2.774 print_stall=0 extruder: target=220 temp=220.1 pwm=0.558
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4989.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6701291 bytes_read=2336262 bytes_retransmit=0 bytes_invalid=0 send_seq=144445 receive_seq=144445 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=15683 freq=180001410 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28618 bytes_read=90061 bytes_retransmit=0 bytes_invalid=0 send_seq=4744 receive_seq=4744 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999104 sd_pos=1382688 heater_bed: target=60 temp=60.0 pwm=0.014 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=1.14 cputime=633.415 memavail=693360 print_time=4994.223 buffer_time=3.131 print_stall=0 extruder: target=220 temp=219.9 pwm=0.616
Stats 4990.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6708133 bytes_read=2337282 bytes_retransmit=0 bytes_invalid=0 send_seq=144566 receive_seq=144566 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=9650 freq=180001403 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28624 bytes_read=90077 bytes_retransmit=0 bytes_invalid=0 send_seq=4745 receive_seq=4745 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999166 sd_pos=1382688 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.8 sysload=1.05 cputime=633.527 memavail=693256 print_time=4994.223 buffer_time=2.130 print_stall=0 extruder: target=220 temp=219.9 pwm=0.616
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4991.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6718085 bytes_read=2338518 bytes_retransmit=0 bytes_invalid=0 send_seq=144733 receive_seq=144733 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=15535 freq=180001391 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28630 bytes_read=90106 bytes_retransmit=0 bytes_invalid=0 send_seq=4746 receive_seq=4746 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999194 sd_pos=1386330 heater_bed: target=60 temp=59.9 pwm=0.136 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.05 cputime=634.155 memavail=693380 print_time=4995.858 buffer_time=2.764 print_stall=0 extruder: target=220 temp=219.8 pwm=0.616
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4992.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6727410 bytes_read=2339759 bytes_retransmit=0 bytes_invalid=0 send_seq=144889 receive_seq=144889 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=21689 freq=180001388 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28636 bytes_read=90122 bytes_retransmit=0 bytes_invalid=0 send_seq=4747 receive_seq=4747 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999209 sd_pos=1390000 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.05 cputime=634.512 memavail=693380 print_time=4997.437 buffer_time=3.336 print_stall=0 extruder: target=220 temp=219.9 pwm=0.616
Stats 4993.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6737844 bytes_read=2341034 bytes_retransmit=0 bytes_invalid=0 send_seq=145062 receive_seq=145061 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=12365 freq=180001387 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28642 bytes_read=90138 bytes_retransmit=0 bytes_invalid=0 send_seq=4748 receive_seq=4748 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999231 sd_pos=1390000 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.05 cputime=634.651 memavail=693276 print_time=4997.437 buffer_time=2.331 print_stall=0 extruder: target=220 temp=220.2 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 4994.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6747730 bytes_read=2342265 bytes_retransmit=0 bytes_invalid=0 send_seq=145227 receive_seq=145227 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=9284 freq=180001380 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28648 bytes_read=90154 bytes_retransmit=0 bytes_invalid=0 send_seq=4749 receive_seq=4749 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999249 sd_pos=1391345 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.05 cputime=635.136 memavail=693384 print_time=4998.390 buffer_time=2.282 print_stall=0 extruder: target=220 temp=220.3 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4995.9: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6758239 bytes_read=2343595 bytes_retransmit=0 bytes_invalid=0 send_seq=145405 receive_seq=145404 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=4568 freq=180001380 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28654 bytes_read=90170 bytes_retransmit=0 bytes_invalid=0 send_seq=4750 receive_seq=4750 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999254 sd_pos=1392568 heater_bed: target=60 temp=60.0 pwm=0.092 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.97 cputime=635.512 memavail=693384 print_time=4999.899 buffer_time=2.772 print_stall=0 extruder: target=220 temp=220.5 pwm=0.488
Stats 4996.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6766176 bytes_read=2344712 bytes_retransmit=0 bytes_invalid=0 send_seq=145539 receive_seq=145539 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001376 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28660 bytes_read=90199 bytes_retransmit=0 bytes_invalid=0 send_seq=4751 receive_seq=4751 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999254 sd_pos=1393680 heater_bed: target=60 temp=59.9 pwm=0.175 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=30.0 sysload=0.97 cputime=635.680 memavail=693280 print_time=5000.351 buffer_time=2.223 print_stall=0 extruder: target=220 temp=220.6 pwm=0.488
Stats 4997.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6769625 bytes_read=2345478 bytes_retransmit=0 bytes_invalid=0 send_seq=145607 receive_seq=145607 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=1571 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28666 bytes_read=90215 bytes_retransmit=0 bytes_invalid=0 send_seq=4752 receive_seq=4752 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999254 sd_pos=1396110 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=0.97 cputime=635.869 memavail=693796 print_time=5001.200 buffer_time=2.073 print_stall=0 extruder: target=220 temp=220.5 pwm=0.488
Stats 4998.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6774301 bytes_read=2346362 bytes_retransmit=0 bytes_invalid=0 send_seq=145695 receive_seq=145695 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=4173 freq=180001379 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28672 bytes_read=90231 bytes_retransmit=0 bytes_invalid=0 send_seq=4753 receive_seq=4753 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999250 sd_pos=1398930 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.97 cputime=636.099 memavail=693900 print_time=5002.338 buffer_time=2.210 print_stall=0 extruder: target=220 temp=220.5 pwm=0.488
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 4999.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6780447 bytes_read=2347288 bytes_retransmit=0 bytes_invalid=0 send_seq=145800 receive_seq=145800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=3799 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28678 bytes_read=90247 bytes_retransmit=0 bytes_invalid=0 send_seq=4754 receive_seq=4754 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999221 sd_pos=1401328 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.97 cputime=636.434 memavail=693656 print_time=5003.196 buffer_time=2.067 print_stall=0 extruder: target=220 temp=220.1 pwm=0.605
Stats 5000.9: gcodein=0  mcu: mcu_awake=0.025 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6786962 bytes_read=2348269 bytes_retransmit=0 bytes_invalid=0 send_seq=145911 receive_seq=145911 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3369 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28684 bytes_read=90263 bytes_retransmit=0 bytes_invalid=0 send_seq=4755 receive_seq=4755 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999205 sd_pos=1404025 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.97 cputime=636.642 memavail=693656 print_time=5004.175 buffer_time=2.045 print_stall=0 extruder: target=220 temp=219.9 pwm=0.605
Stats 5001.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6793598 bytes_read=2349294 bytes_retransmit=0 bytes_invalid=0 send_seq=146024 receive_seq=146024 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=4135 freq=180001418 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28690 bytes_read=90292 bytes_retransmit=0 bytes_invalid=0 send_seq=4756 receive_seq=4756 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999153 sd_pos=1406848 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.97 cputime=636.863 memavail=693656 print_time=5005.260 buffer_time=2.130 print_stall=0 extruder: target=220 temp=219.7 pwm=0.605
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5002.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6799887 bytes_read=2350225 bytes_retransmit=0 bytes_invalid=0 send_seq=146130 receive_seq=146130 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=3816 freq=180001424 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28696 bytes_read=90308 bytes_retransmit=0 bytes_invalid=0 send_seq=4757 receive_seq=4757 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999112 sd_pos=1409257 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.97 cputime=637.195 memavail=693284 print_time=5006.156 buffer_time=2.025 print_stall=0 extruder: target=220 temp=219.6 pwm=0.656
Stats 5003.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6806776 bytes_read=2351246 bytes_retransmit=0 bytes_invalid=0 send_seq=146249 receive_seq=146249 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=3010 freq=180001412 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28702 bytes_read=90324 bytes_retransmit=0 bytes_invalid=0 send_seq=4758 receive_seq=4758 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999133 sd_pos=1412064 heater_bed: target=60 temp=60.1 pwm=0.103 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.8 sysload=0.97 cputime=637.434 memavail=693408 print_time=5007.166 buffer_time=2.034 print_stall=0 extruder: target=220 temp=219.6 pwm=0.656
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5004.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6813555 bytes_read=2352255 bytes_retransmit=0 bytes_invalid=0 send_seq=146363 receive_seq=146362 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=3431 freq=180001431 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28708 bytes_read=90340 bytes_retransmit=0 bytes_invalid=0 send_seq=4759 receive_seq=4759 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999211 sd_pos=1414756 heater_bed: target=60 temp=60.1 pwm=0.030 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.97 cputime=637.782 memavail=693408 print_time=5008.151 buffer_time=2.019 print_stall=0 extruder: target=220 temp=219.9 pwm=0.581
Stats 5005.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=6819479 bytes_read=2353171 bytes_retransmit=0 bytes_invalid=0 send_seq=146466 receive_seq=146465 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=3429 freq=180001453 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28714 bytes_read=90356 bytes_retransmit=0 bytes_invalid=0 send_seq=4760 receive_seq=4760 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999146 sd_pos=1417423 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.89 cputime=638.017 memavail=693304 print_time=5009.287 buffer_time=2.154 print_stall=0 extruder: target=220 temp=220.0 pwm=0.515
Stats 5006.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6826785 bytes_read=2354243 bytes_retransmit=0 bytes_invalid=0 send_seq=146591 receive_seq=146591 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=1595 freq=180001442 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28720 bytes_read=90385 bytes_retransmit=0 bytes_invalid=0 send_seq=4761 receive_seq=4761 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999621 adj=49999107 sd_pos=1419785 heater_bed: target=60 temp=60.0 pwm=0.170 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.89 cputime=638.215 memavail=693420 print_time=5010.274 buffer_time=2.140 print_stall=0 extruder: target=220 temp=220.3 pwm=0.515
Stats 5007.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6832041 bytes_read=2355137 bytes_retransmit=0 bytes_invalid=0 send_seq=146681 receive_seq=146681 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=2764 freq=180001434 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28726 bytes_read=90401 bytes_retransmit=0 bytes_invalid=0 send_seq=4762 receive_seq=4762 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999140 sd_pos=1422164 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.89 cputime=638.422 memavail=693420 print_time=5011.291 buffer_time=2.157 print_stall=0 extruder: target=220 temp=220.3 pwm=0.515
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5008.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6837225 bytes_read=2355993 bytes_retransmit=0 bytes_invalid=0 send_seq=146772 receive_seq=146772 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=5196 freq=180001422 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28732 bytes_read=90417 bytes_retransmit=0 bytes_invalid=0 send_seq=4763 receive_seq=4763 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999618 adj=49999162 sd_pos=1423717 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.89 cputime=638.912 memavail=693048 print_time=5012.269 buffer_time=2.134 print_stall=0 extruder: target=220 temp=220.4 pwm=0.515
Stats 5009.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6843989 bytes_read=2356980 bytes_retransmit=0 bytes_invalid=0 send_seq=146887 receive_seq=146887 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=3825 freq=180001409 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28738 bytes_read=90433 bytes_retransmit=0 bytes_invalid=0 send_seq=4764 receive_seq=4764 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999617 adj=49999199 sd_pos=1424615 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.89 cputime=639.103 memavail=693048 print_time=5013.654 buffer_time=2.518 print_stall=0 extruder: target=220 temp=220.3 pwm=0.515
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5010.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6851894 bytes_read=2358092 bytes_retransmit=0 bytes_invalid=0 send_seq=147022 receive_seq=147022 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=7312 freq=180001418 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=28744 bytes_read=90449 bytes_retransmit=0 bytes_invalid=0 send_seq=4765 receive_seq=4765 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999240 sd_pos=1427182 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.82 cputime=639.746 memavail=693292 print_time=5015.367 buffer_time=3.231 print_stall=0 extruder: target=220 temp=220.1 pwm=0.538
Stats 5011.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6855676 bytes_read=2358838 bytes_retransmit=0 bytes_invalid=0 send_seq=147091 receive_seq=147091 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4149 freq=180001410 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28750 bytes_read=90478 bytes_retransmit=0 bytes_invalid=0 send_seq=4766 receive_seq=4766 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999620 adj=49999227 sd_pos=1427182 heater_bed: target=60 temp=60.0 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.82 cputime=639.832 memavail=693212 print_time=5015.367 buffer_time=2.230 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5012.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6860836 bytes_read=2359755 bytes_retransmit=0 bytes_invalid=0 send_seq=147186 receive_seq=147186 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=15595 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28756 bytes_read=90494 bytes_retransmit=0 bytes_invalid=0 send_seq=4767 receive_seq=4767 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999257 sd_pos=1430948 heater_bed: target=60 temp=60.0 pwm=0.110 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.82 cputime=640.291 memavail=693308 print_time=5016.980 buffer_time=2.842 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5014.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6874262 bytes_read=2361420 bytes_retransmit=0 bytes_invalid=0 send_seq=147409 receive_seq=147407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=13044 freq=180001397 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28762 bytes_read=90510 bytes_retransmit=0 bytes_invalid=0 send_seq=4768 receive_seq=4768 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999619 adj=49999267 sd_pos=1433075 heater_bed: target=60 temp=60.0 pwm=0.110 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.82 cputime=641.395 memavail=693364 print_time=5018.038 buffer_time=2.315 print_stall=0 extruder: target=220 temp=219.6 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5015.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6885355 bytes_read=2362761 bytes_retransmit=0 bytes_invalid=0 send_seq=147595 receive_seq=147595 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=8034 freq=180001397 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28768 bytes_read=90526 bytes_retransmit=0 bytes_invalid=0 send_seq=4769 receive_seq=4769 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999281 sd_pos=1434092 heater_bed: target=60 temp=60.1 pwm=0.110 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.84 cputime=641.730 memavail=693320 print_time=5019.045 buffer_time=2.322 print_stall=0 extruder: target=220 temp=219.7 pwm=0.598
Stats 5016.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6895394 bytes_read=2364017 bytes_retransmit=0 bytes_invalid=0 send_seq=147764 receive_seq=147764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=1284 freq=180001393 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=28774 bytes_read=90542 bytes_retransmit=0 bytes_invalid=0 send_seq=4770 receive_seq=4770 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999624 adj=49999322 sd_pos=1434558 heater_bed: target=60 temp=60.1 pwm=0.110 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.84 cputime=641.905 memavail=693320 print_time=5019.994 buffer_time=2.270 print_stall=0 extruder: target=220 temp=219.7 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5017.8: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6903932 bytes_read=2365265 bytes_retransmit=0 bytes_invalid=0 send_seq=147908 receive_seq=147907 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=3609 freq=180001390 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28780 bytes_read=90571 bytes_retransmit=0 bytes_invalid=0 send_seq=4771 receive_seq=4771 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999623 adj=49999330 sd_pos=1436640 heater_bed: target=60 temp=60.1 pwm=0.048 raspberry_pi: temp=44.0 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.84 cputime=642.555 memavail=693132 print_time=5021.983 buffer_time=2.945 print_stall=0 extruder: target=220 temp=219.9 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5019.3: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6908413 bytes_read=2366183 bytes_retransmit=0 bytes_invalid=0 send_seq=147989 receive_seq=147988 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=9789 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28786 bytes_read=90587 bytes_retransmit=0 bytes_invalid=0 send_seq=4772 receive_seq=4772 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999286 sd_pos=1438983 heater_bed: target=60 temp=60.1 pwm=0.113 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.84 cputime=643.288 memavail=693332 print_time=5023.198 buffer_time=2.715 print_stall=0 extruder: target=220 temp=220.0 pwm=0.537
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5020.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6914151 bytes_read=2367123 bytes_retransmit=0 bytes_invalid=0 send_seq=148093 receive_seq=148091 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=8066 freq=180001383 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28792 bytes_read=90603 bytes_retransmit=0 bytes_invalid=0 send_seq=4773 receive_seq=4773 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999625 adj=49999326 sd_pos=1440030 heater_bed: target=60 temp=60.2 pwm=0.056 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.8 sysload=0.85 cputime=643.857 memavail=693332 print_time=5023.649 buffer_time=2.053 print_stall=0 extruder: target=220 temp=220.2 pwm=0.537
Stats 5021.4: gcodein=0  mcu: mcu_awake=0.023 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=6923878 bytes_read=2368407 bytes_retransmit=0 bytes_invalid=0 send_seq=148256 receive_seq=148256 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=2998 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28798 bytes_read=90619 bytes_retransmit=0 bytes_invalid=0 send_seq=4774 receive_seq=4774 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999327 sd_pos=1440700 heater_bed: target=60 temp=60.1 pwm=0.056 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.85 cputime=644.053 memavail=693228 print_time=5025.120 buffer_time=2.502 print_stall=0 extruder: target=220 temp=220.3 pwm=0.537
Stats 5022.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=6929890 bytes_read=2369344 bytes_retransmit=0 bytes_invalid=0 send_seq=148360 receive_seq=148360 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28804 bytes_read=90648 bytes_retransmit=0 bytes_invalid=0 send_seq=4775 receive_seq=4775 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999359 sd_pos=1441060 heater_bed: target=60 temp=60.1 pwm=0.113 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.85 cputime=644.189 memavail=693336 print_time=5025.793 buffer_time=2.174 print_stall=0 extruder: target=220 temp=220.1 pwm=0.537
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5023.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=6935770 bytes_read=2370295 bytes_retransmit=0 bytes_invalid=0 send_seq=148468 receive_seq=148468 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2236 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28810 bytes_read=90664 bytes_retransmit=0 bytes_invalid=0 send_seq=4776 receive_seq=4776 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999381 sd_pos=1442495 heater_bed: target=60 temp=60.1 pwm=0.113 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.85 cputime=644.670 memavail=693336 print_time=5027.133 buffer_time=2.512 print_stall=0 extruder: target=220 temp=220.0 pwm=0.586
Stats 5024.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=6938260 bytes_read=2370990 bytes_retransmit=0 bytes_invalid=0 send_seq=148517 receive_seq=148516 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=11991 freq=180001370 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28816 bytes_read=90680 bytes_retransmit=0 bytes_invalid=0 send_seq=4777 receive_seq=4777 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999351 sd_pos=1445076 heater_bed: target=60 temp=60.2 pwm=0.051 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.85 cputime=644.890 memavail=693348 print_time=5028.492 buffer_time=2.871 print_stall=0 extruder: target=220 temp=219.9 pwm=0.586
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5025.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=6944457 bytes_read=2371930 bytes_retransmit=0 bytes_invalid=0 send_seq=148621 receive_seq=148621 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=20475 freq=180001380 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28822 bytes_read=90696 bytes_retransmit=0 bytes_invalid=0 send_seq=4778 receive_seq=4778 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999315 sd_pos=1448877 heater_bed: target=60 temp=60.1 pwm=0.130 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.86 cputime=645.212 memavail=693348 print_time=5029.941 buffer_time=3.258 print_stall=0 extruder: target=220 temp=219.8 pwm=0.586
Stats 5026.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=6952901 bytes_read=2373090 bytes_retransmit=0 bytes_invalid=0 send_seq=148764 receive_seq=148764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=12953 freq=180001384 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28828 bytes_read=90712 bytes_retransmit=0 bytes_invalid=0 send_seq=4779 receive_seq=4779 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999271 sd_pos=1448877 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.8 sysload=0.86 cputime=645.326 memavail=693348 print_time=5029.941 buffer_time=2.258 print_stall=0 extruder: target=220 temp=219.6 pwm=0.660
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5027.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6963920 bytes_read=2374441 bytes_retransmit=0 bytes_invalid=0 send_seq=148949 receive_seq=148948 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=7116 freq=180001379 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28834 bytes_read=90741 bytes_retransmit=0 bytes_invalid=0 send_seq=4780 receive_seq=4780 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999276 sd_pos=1450047 heater_bed: target=60 temp=60.2 pwm=0.062 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.86 cputime=645.618 memavail=693600 print_time=5030.739 buffer_time=2.055 print_stall=0 extruder: target=220 temp=219.6 pwm=0.660
Stats 5028.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6974354 bytes_read=2375737 bytes_retransmit=0 bytes_invalid=0 send_seq=149125 receive_seq=149125 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=3945 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28840 bytes_read=90757 bytes_retransmit=0 bytes_invalid=0 send_seq=4781 receive_seq=4781 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999278 sd_pos=1453346 heater_bed: target=60 temp=60.2 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.8 sysload=0.86 cputime=645.880 memavail=693600 print_time=5031.882 buffer_time=2.198 print_stall=0 extruder: target=220 temp=219.6 pwm=0.660
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5029.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6980825 bytes_read=2376732 bytes_retransmit=0 bytes_invalid=0 send_seq=149235 receive_seq=149235 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=5174 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28846 bytes_read=90773 bytes_retransmit=0 bytes_invalid=0 send_seq=4782 receive_seq=4782 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999296 sd_pos=1456185 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.86 cputime=646.233 memavail=693600 print_time=5033.084 buffer_time=2.399 print_stall=0 extruder: target=220 temp=219.8 pwm=0.576
Stats 5030.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6987122 bytes_read=2377677 bytes_retransmit=0 bytes_invalid=0 send_seq=149341 receive_seq=149341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4515 freq=180001360 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28852 bytes_read=90789 bytes_retransmit=0 bytes_invalid=0 send_seq=4783 receive_seq=4783 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999304 sd_pos=1458514 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.7 sysload=0.87 cputime=646.468 memavail=692976 print_time=5033.911 buffer_time=2.226 print_stall=0 extruder: target=220 temp=220.1 pwm=0.524
Stats 5031.5: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=6993272 bytes_read=2378613 bytes_retransmit=0 bytes_invalid=0 send_seq=149448 receive_seq=149448 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=36 stalled_bytes=3672 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=28858 bytes_read=90805 bytes_retransmit=0 bytes_invalid=0 send_seq=4784 receive_seq=4784 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999324 sd_pos=1460855 heater_bed: target=60 temp=60.2 pwm=0.057 raspberry_pi: temp=42.4 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.87 cputime=646.659 memavail=693108 print_time=5034.792 buffer_time=2.105 print_stall=0 extruder: target=220 temp=220.3 pwm=0.524
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5032.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7000306 bytes_read=2379684 bytes_retransmit=0 bytes_invalid=0 send_seq=149568 receive_seq=149568 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=36 stalled_bytes=3595 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28864 bytes_read=90833 bytes_retransmit=0 bytes_invalid=0 send_seq=4785 receive_seq=4785 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999337 sd_pos=1463620 heater_bed: target=60 temp=60.2 pwm=0.075 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=0.87 cputime=647.020 memavail=692996 print_time=5035.786 buffer_time=2.099 print_stall=0 extruder: target=220 temp=220.5 pwm=0.440
Stats 5033.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7006476 bytes_read=2380614 bytes_retransmit=0 bytes_invalid=0 send_seq=149673 receive_seq=149673 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=5685 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28870 bytes_read=90848 bytes_retransmit=0 bytes_invalid=0 send_seq=4786 receive_seq=4786 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999328 sd_pos=1467157 heater_bed: target=60 temp=60.1 pwm=0.075 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=0.87 cputime=647.294 memavail=693364 print_time=5037.104 buffer_time=2.416 print_stall=0 extruder: target=220 temp=220.6 pwm=0.440
Stats 5034.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7013110 bytes_read=2381583 bytes_retransmit=0 bytes_invalid=0 send_seq=149789 receive_seq=149789 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=5480 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28876 bytes_read=90863 bytes_retransmit=0 bytes_invalid=0 send_seq=4787 receive_seq=4787 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999297 sd_pos=1469741 heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=0.87 cputime=647.504 memavail=693364 print_time=5038.149 buffer_time=2.460 print_stall=0 extruder: target=220 temp=220.3 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5035.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7019946 bytes_read=2382628 bytes_retransmit=0 bytes_invalid=0 send_seq=149907 receive_seq=149907 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=4044 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28882 bytes_read=90878 bytes_retransmit=0 bytes_invalid=0 send_seq=4788 receive_seq=4788 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999630 adj=49999317 sd_pos=1471755 heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=0.96 cputime=647.808 memavail=693364 print_time=5038.898 buffer_time=2.208 print_stall=0 extruder: target=220 temp=220.2 pwm=0.579
Stats 5036.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7025858 bytes_read=2383548 bytes_retransmit=0 bytes_invalid=0 send_seq=150008 receive_seq=150008 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=2652 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=28888 bytes_read=90893 bytes_retransmit=0 bytes_invalid=0 send_seq=4789 receive_seq=4789 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999360 sd_pos=1473683 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=0.96 cputime=648.043 memavail=693624 print_time=5039.713 buffer_time=2.022 print_stall=0 extruder: target=220 temp=219.8 pwm=0.656
Stats 5037.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7032785 bytes_read=2384545 bytes_retransmit=0 bytes_invalid=0 send_seq=150124 receive_seq=150124 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1410 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28894 bytes_read=90921 bytes_retransmit=0 bytes_invalid=0 send_seq=4790 receive_seq=4790 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999389 sd_pos=1476017 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=0.96 cputime=648.266 memavail=693584 print_time=5040.784 buffer_time=2.093 print_stall=0 extruder: target=220 temp=219.6 pwm=0.656
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5038.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7038063 bytes_read=2385449 bytes_retransmit=0 bytes_invalid=0 send_seq=150217 receive_seq=150216 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=5303 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28900 bytes_read=90937 bytes_retransmit=0 bytes_invalid=0 send_seq=4791 receive_seq=4791 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999371 sd_pos=1479159 heater_bed: target=60 temp=60.0 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.96 cputime=648.734 memavail=693624 print_time=5042.075 buffer_time=2.382 print_stall=0 extruder: target=220 temp=219.6 pwm=0.656
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5039.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7043403 bytes_read=2386345 bytes_retransmit=0 bytes_invalid=0 send_seq=150310 receive_seq=150310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=3970 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28906 bytes_read=90953 bytes_retransmit=0 bytes_invalid=0 send_seq=4792 receive_seq=4792 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999340 sd_pos=1479785 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=0.96 cputime=648.945 memavail=693636 print_time=5043.054 buffer_time=2.361 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5040.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7050013 bytes_read=2387311 bytes_retransmit=0 bytes_invalid=0 send_seq=150423 receive_seq=150423 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=1485 freq=180001321 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28912 bytes_read=90969 bytes_retransmit=0 bytes_invalid=0 send_seq=4793 receive_seq=4793 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999353 sd_pos=1480520 heater_bed: target=60 temp=60.1 pwm=0.043 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.05 cputime=649.379 memavail=693636 print_time=5043.963 buffer_time=2.269 print_stall=0 extruder: target=220 temp=220.0 pwm=0.517
Stats 5041.5: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7056032 bytes_read=2388281 bytes_retransmit=0 bytes_invalid=0 send_seq=150526 receive_seq=150526 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=28918 bytes_read=90985 bytes_retransmit=0 bytes_invalid=0 send_seq=4794 receive_seq=4794 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999335 sd_pos=1481053 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.05 cputime=649.558 memavail=693560 print_time=5045.067 buffer_time=2.372 print_stall=0 extruder: target=220 temp=220.1 pwm=0.517
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5042.5: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7060278 bytes_read=2389121 bytes_retransmit=0 bytes_invalid=0 send_seq=150609 receive_seq=150608 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4876 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28924 bytes_read=91014 bytes_retransmit=0 bytes_invalid=0 send_seq=4795 receive_seq=4795 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999306 sd_pos=1482905 heater_bed: target=60 temp=60.0 pwm=0.092 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.05 cputime=650.287 memavail=693636 print_time=5046.435 buffer_time=2.735 print_stall=0 extruder: target=220 temp=220.4 pwm=0.517
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5043.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7065606 bytes_read=2390081 bytes_retransmit=0 bytes_invalid=0 send_seq=150706 receive_seq=150706 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=6996 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28930 bytes_read=91030 bytes_retransmit=0 bytes_invalid=0 send_seq=4796 receive_seq=4796 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999322 sd_pos=1484100 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.7 sysload=1.05 cputime=650.978 memavail=693636 print_time=5047.219 buffer_time=2.222 print_stall=0 extruder: target=220 temp=220.4 pwm=0.517
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5044.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7071615 bytes_read=2391041 bytes_retransmit=0 bytes_invalid=0 send_seq=150809 receive_seq=150807 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=6763 freq=180001327 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28936 bytes_read=91046 bytes_retransmit=0 bytes_invalid=0 send_seq=4797 receive_seq=4797 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999332 sd_pos=1485064 heater_bed: target=60 temp=60.1 pwm=0.070 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.05 cputime=651.291 memavail=693684 print_time=5048.213 buffer_time=2.215 print_stall=0 extruder: target=220 temp=220.3 pwm=0.512
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5046.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7083150 bytes_read=2392465 bytes_retransmit=0 bytes_invalid=0 send_seq=151001 receive_seq=151000 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=8322 freq=180001390 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=28942 bytes_read=91062 bytes_retransmit=0 bytes_invalid=0 send_seq=4798 receive_seq=4798 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999343 sd_pos=1488108 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.04 cputime=652.035 memavail=693652 print_time=5050.275 buffer_time=3.102 print_stall=0 extruder: target=220 temp=220.0 pwm=0.567
Stats 5047.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7088564 bytes_read=2393360 bytes_retransmit=0 bytes_invalid=0 send_seq=151094 receive_seq=151094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=3586 freq=180001391 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28948 bytes_read=91091 bytes_retransmit=0 bytes_invalid=0 send_seq=4799 receive_seq=4799 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999149 sd_pos=1488108 heater_bed: target=60 temp=60.1 pwm=0.042 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.04 cputime=652.120 memavail=693652 print_time=5050.275 buffer_time=2.101 print_stall=0 extruder: target=220 temp=219.7 pwm=0.643
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5048.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7091747 bytes_read=2394052 bytes_retransmit=0 bytes_invalid=0 send_seq=151150 receive_seq=151149 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=13697 freq=180001385 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28954 bytes_read=91107 bytes_retransmit=0 bytes_invalid=0 send_seq=4800 receive_seq=4800 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999162 sd_pos=1491293 heater_bed: target=60 temp=60.0 pwm=0.194 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.04 cputime=652.663 memavail=693320 print_time=5051.734 buffer_time=2.560 print_stall=0 extruder: target=220 temp=219.5 pwm=0.643
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5049.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7101630 bytes_read=2395327 bytes_retransmit=0 bytes_invalid=0 send_seq=151316 receive_seq=151315 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=11924 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28960 bytes_read=91123 bytes_retransmit=0 bytes_invalid=0 send_seq=4801 receive_seq=4801 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999152 sd_pos=1493143 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.04 cputime=653.292 memavail=693404 print_time=5052.514 buffer_time=2.339 print_stall=0 extruder: target=220 temp=219.4 pwm=0.643
Stats 5050.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7111177 bytes_read=2396547 bytes_retransmit=0 bytes_invalid=0 send_seq=151475 receive_seq=151474 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=6110 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28966 bytes_read=91139 bytes_retransmit=0 bytes_invalid=0 send_seq=4802 receive_seq=4802 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999163 sd_pos=1493512 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.6 sysload=1.04 cputime=653.463 memavail=693404 print_time=5053.516 buffer_time=2.341 print_stall=0 extruder: target=220 temp=219.5 pwm=0.643
Stats 5051.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7121420 bytes_read=2397808 bytes_retransmit=0 bytes_invalid=0 send_seq=151647 receive_seq=151646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=369 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=28972 bytes_read=91155 bytes_retransmit=0 bytes_invalid=0 send_seq=4803 receive_seq=4803 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999196 sd_pos=1494374 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.04 cputime=653.700 memavail=692984 print_time=5054.752 buffer_time=2.574 print_stall=0 extruder: target=220 temp=219.7 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5052.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7126336 bytes_read=2398682 bytes_retransmit=0 bytes_invalid=0 send_seq=151735 receive_seq=151734 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4065 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=28978 bytes_read=91184 bytes_retransmit=0 bytes_invalid=0 send_seq=4804 receive_seq=4804 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999228 sd_pos=1496051 heater_bed: target=60 temp=60.0 pwm=0.108 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.7 sysload=1.04 cputime=654.308 memavail=693164 print_time=5056.182 buffer_time=3.000 print_stall=0 extruder: target=220 temp=219.9 pwm=0.584
Stats 5053.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7130028 bytes_read=2399479 bytes_retransmit=0 bytes_invalid=0 send_seq=151803 receive_seq=151803 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=939 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=28984 bytes_read=91200 bytes_retransmit=0 bytes_invalid=0 send_seq=4805 receive_seq=4805 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999232 sd_pos=1496051 heater_bed: target=60 temp=60.0 pwm=0.075 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.04 cputime=654.411 memavail=693164 print_time=5056.182 buffer_time=1.999 print_stall=0 extruder: target=220 temp=220.2 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5054.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7132675 bytes_read=2400160 bytes_retransmit=0 bytes_invalid=0 send_seq=151857 receive_seq=151857 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=9532 freq=180001370 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=28990 bytes_read=91216 bytes_retransmit=0 bytes_invalid=0 send_seq=4806 receive_seq=4806 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999240 sd_pos=1498323 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.04 cputime=654.661 memavail=693112 print_time=5057.419 buffer_time=2.235 print_stall=0 extruder: target=220 temp=220.4 pwm=0.527
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5055.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7141092 bytes_read=2401315 bytes_retransmit=0 bytes_invalid=0 send_seq=151999 receive_seq=151999 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=8250 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=28996 bytes_read=91232 bytes_retransmit=0 bytes_invalid=0 send_seq=4807 receive_seq=4807 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999271 sd_pos=1500081 heater_bed: target=60 temp=60.0 pwm=0.063 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.04 cputime=655.077 memavail=693168 print_time=5058.401 buffer_time=2.216 print_stall=0 extruder: target=220 temp=220.3 pwm=0.527
Stats 5056.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7150863 bytes_read=2402545 bytes_retransmit=0 bytes_invalid=0 send_seq=152162 receive_seq=152162 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4032 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29002 bytes_read=91248 bytes_retransmit=0 bytes_invalid=0 send_seq=4808 receive_seq=4808 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999244 sd_pos=1502245 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.12 cputime=655.286 memavail=693168 print_time=5059.221 buffer_time=2.035 print_stall=0 extruder: target=220 temp=220.3 pwm=0.527
Stats 5057.0: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7158511 bytes_read=2403597 bytes_retransmit=0 bytes_invalid=0 send_seq=152293 receive_seq=152293 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=4673 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29008 bytes_read=91277 bytes_retransmit=0 bytes_invalid=0 send_seq=4809 receive_seq=4809 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999243 sd_pos=1506008 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.12 cputime=655.583 memavail=693260 print_time=5060.660 buffer_time=2.457 print_stall=0 extruder: target=220 temp=220.1 pwm=0.599
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5058.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=7164779 bytes_read=2404586 bytes_retransmit=0 bytes_invalid=0 send_seq=152400 receive_seq=152400 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=4530 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29014 bytes_read=91293 bytes_retransmit=0 bytes_invalid=0 send_seq=4810 receive_seq=4810 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999234 sd_pos=1508339 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.12 cputime=655.934 memavail=693684 print_time=5061.512 buffer_time=2.308 print_stall=0 extruder: target=220 temp=219.9 pwm=0.599
Stats 5059.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=7170368 bytes_read=2405485 bytes_retransmit=0 bytes_invalid=0 send_seq=152497 receive_seq=152497 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=4489 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29020 bytes_read=91309 bytes_retransmit=0 bytes_invalid=0 send_seq=4811 receive_seq=4811 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999229 sd_pos=1510628 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.6 sysload=1.12 cputime=656.153 memavail=693684 print_time=5062.434 buffer_time=2.229 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
Stats 5060.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=7177242 bytes_read=2406476 bytes_retransmit=0 bytes_invalid=0 send_seq=152615 receive_seq=152615 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=3784 freq=180001358 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29026 bytes_read=91325 bytes_retransmit=0 bytes_invalid=0 send_seq=4812 receive_seq=4812 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999631 adj=49999218 sd_pos=1513368 heater_bed: target=60 temp=60.0 pwm=0.096 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.5 sysload=1.12 cputime=656.377 memavail=693580 print_time=5063.438 buffer_time=2.233 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5061.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=7183523 bytes_read=2407456 bytes_retransmit=0 bytes_invalid=0 send_seq=152722 receive_seq=152722 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=3591 freq=180001352 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29032 bytes_read=91341 bytes_retransmit=0 bytes_invalid=0 send_seq=4813 receive_seq=4813 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999224 sd_pos=1515737 heater_bed: target=60 temp=60.0 pwm=0.069 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.11 cputime=656.757 memavail=693692 print_time=5064.320 buffer_time=2.115 print_stall=0 extruder: target=220 temp=219.8 pwm=0.603
Stats 5062.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000012 bytes_write=7189468 bytes_read=2408401 bytes_retransmit=0 bytes_invalid=0 send_seq=152826 receive_seq=152826 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=5954 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29038 bytes_read=91370 bytes_retransmit=0 bytes_invalid=0 send_seq=4814 receive_seq=4814 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999225 sd_pos=1519321 heater_bed: target=60 temp=60.0 pwm=0.069 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.4 sysload=1.11 cputime=657.045 memavail=693684 print_time=5065.734 buffer_time=2.529 print_stall=0 extruder: target=220 temp=220.0 pwm=0.603
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5063.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7197026 bytes_read=2409521 bytes_retransmit=0 bytes_invalid=0 send_seq=152955 receive_seq=152955 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=4603 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29044 bytes_read=91386 bytes_retransmit=0 bytes_invalid=0 send_seq=4815 receive_seq=4815 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999248 sd_pos=1521691 heater_bed: target=60 temp=60.0 pwm=0.090 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.7 sysload=1.11 cputime=657.361 memavail=693696 print_time=5066.579 buffer_time=2.251 print_stall=0 extruder: target=220 temp=220.1 pwm=0.533
Stats 5064.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7203230 bytes_read=2410442 bytes_retransmit=0 bytes_invalid=0 send_seq=153060 receive_seq=153059 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=3431 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29050 bytes_read=91402 bytes_retransmit=0 bytes_invalid=0 send_seq=4816 receive_seq=4816 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999628 adj=49999248 sd_pos=1523652 heater_bed: target=60 temp=60.0 pwm=0.102 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.11 cputime=657.575 memavail=693696 print_time=5067.517 buffer_time=2.189 print_stall=0 extruder: target=220 temp=220.2 pwm=0.533
Stats 5065.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7209816 bytes_read=2411443 bytes_retransmit=0 bytes_invalid=0 send_seq=153174 receive_seq=153174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=1491 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29056 bytes_read=91418 bytes_retransmit=0 bytes_invalid=0 send_seq=4817 receive_seq=4817 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999261 sd_pos=1525742 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.11 cputime=657.819 memavail=693696 print_time=5068.366 buffer_time=2.037 print_stall=0 extruder: target=220 temp=220.3 pwm=0.533
Stats 5066.1: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7215520 bytes_read=2412387 bytes_retransmit=0 bytes_invalid=0 send_seq=153274 receive_seq=153274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1980 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29062 bytes_read=91434 bytes_retransmit=0 bytes_invalid=0 send_seq=4818 receive_seq=4818 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999296 sd_pos=1528041 heater_bed: target=60 temp=60.0 pwm=0.098 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.34 cputime=658.051 memavail=693900 print_time=5069.378 buffer_time=2.049 print_stall=0 extruder: target=220 temp=220.2 pwm=0.533
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5067.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7220995 bytes_read=2413294 bytes_retransmit=0 bytes_invalid=0 send_seq=153372 receive_seq=153372 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=3124 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29068 bytes_read=91463 bytes_retransmit=0 bytes_invalid=0 send_seq=4819 receive_seq=4819 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999627 adj=49999317 sd_pos=1529473 heater_bed: target=60 temp=59.9 pwm=0.106 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.4 sysload=1.34 cputime=658.500 memavail=693956 print_time=5070.363 buffer_time=2.033 print_stall=0 extruder: target=220 temp=220.2 pwm=0.547
Stats 5068.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7227282 bytes_read=2414260 bytes_retransmit=0 bytes_invalid=0 send_seq=153480 receive_seq=153480 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=498 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29074 bytes_read=91479 bytes_retransmit=0 bytes_invalid=0 send_seq=4820 receive_seq=4820 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999629 adj=49999247 sd_pos=1529958 heater_bed: target=60 temp=59.9 pwm=0.197 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.4 sysload=1.34 cputime=658.712 memavail=693708 print_time=5071.373 buffer_time=2.042 print_stall=0 extruder: target=220 temp=220.1 pwm=0.547
Stats 5069.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7231227 bytes_read=2415074 bytes_retransmit=0 bytes_invalid=0 send_seq=153554 receive_seq=153554 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29080 bytes_read=91495 bytes_retransmit=0 bytes_invalid=0 send_seq=4821 receive_seq=4821 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999169 sd_pos=1530612 heater_bed: target=60 temp=59.9 pwm=0.119 raspberry_pi: temp=42.9 mcu_temp: temp=37.8 chamber: temp=29.5 sysload=1.34 cputime=658.918 memavail=693360 print_time=5072.542 buffer_time=2.211 print_stall=0 extruder: target=220 temp=219.9 pwm=0.616
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5070.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7233621 bytes_read=2415745 bytes_retransmit=0 bytes_invalid=0 send_seq=153606 receive_seq=153606 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29086 bytes_read=91511 bytes_retransmit=0 bytes_invalid=0 send_seq=4822 receive_seq=4822 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999237 sd_pos=1531880 heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=42.4 mcu_temp: temp=38.0 chamber: temp=29.6 sysload=1.34 cputime=659.242 memavail=693456 print_time=5073.203 buffer_time=1.843 print_stall=0 extruder: target=220 temp=219.8 pwm=0.616
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5071.2: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7240355 bytes_read=2416760 bytes_retransmit=0 bytes_invalid=0 send_seq=153723 receive_seq=153723 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=5676 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29092 bytes_read=91527 bytes_retransmit=0 bytes_invalid=0 send_seq=4823 receive_seq=4823 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999240 sd_pos=1533701 heater_bed: target=60 temp=59.8 pwm=0.166 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.39 cputime=659.752 memavail=693456 print_time=5074.939 buffer_time=2.579 print_stall=0 extruder: target=220 temp=219.8 pwm=0.616
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5072.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7244161 bytes_read=2417586 bytes_retransmit=0 bytes_invalid=0 send_seq=153797 receive_seq=153797 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=5293 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29098 bytes_read=91556 bytes_retransmit=0 bytes_invalid=0 send_seq=4824 receive_seq=4824 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999240 sd_pos=1534247 heater_bed: target=60 temp=59.9 pwm=0.166 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.39 cputime=660.031 memavail=693468 print_time=5075.822 buffer_time=2.461 print_stall=0 extruder: target=220 temp=219.8 pwm=0.616
Stats 5073.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7250836 bytes_read=2418572 bytes_retransmit=0 bytes_invalid=0 send_seq=153912 receive_seq=153912 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=2281 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29104 bytes_read=91572 bytes_retransmit=0 bytes_invalid=0 send_seq=4825 receive_seq=4825 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999266 sd_pos=1534646 heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.39 cputime=660.221 memavail=693468 print_time=5076.914 buffer_time=2.552 print_stall=0 extruder: target=220 temp=219.9 pwm=0.557
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5074.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7259064 bytes_read=2419722 bytes_retransmit=0 bytes_invalid=0 send_seq=154056 receive_seq=154056 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=8483 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29110 bytes_read=91588 bytes_retransmit=0 bytes_invalid=0 send_seq=4826 receive_seq=4826 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999274 sd_pos=1538138 heater_bed: target=60 temp=59.9 pwm=0.120 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.39 cputime=660.858 memavail=693468 print_time=5078.724 buffer_time=3.360 print_stall=0 extruder: target=220 temp=220.0 pwm=0.557
Stats 5075.2: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7261819 bytes_read=2420407 bytes_retransmit=0 bytes_invalid=0 send_seq=154106 receive_seq=154105 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=6212 freq=180001348 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29116 bytes_read=91604 bytes_retransmit=0 bytes_invalid=0 send_seq=4827 receive_seq=4827 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999275 sd_pos=1538138 heater_bed: target=60 temp=59.9 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.6 sysload=1.39 cputime=660.971 memavail=693472 print_time=5078.724 buffer_time=2.358 print_stall=0 extruder: target=220 temp=220.0 pwm=0.557
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5076.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7264861 bytes_read=2421157 bytes_retransmit=0 bytes_invalid=0 send_seq=154167 receive_seq=154167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=7808 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29122 bytes_read=91620 bytes_retransmit=0 bytes_invalid=0 send_seq=4828 receive_seq=4828 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999290 sd_pos=1540071 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.44 cputime=661.690 memavail=693472 print_time=5079.220 buffer_time=1.760 print_stall=0 extruder: target=220 temp=220.0 pwm=0.557
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5077.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7276013 bytes_read=2422543 bytes_retransmit=0 bytes_invalid=0 send_seq=154355 receive_seq=154355 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=7583 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=29128 bytes_read=91649 bytes_retransmit=0 bytes_invalid=0 send_seq=4829 receive_seq=4829 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999294 sd_pos=1541166 heater_bed: target=60 temp=59.9 pwm=0.155 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.44 cputime=661.982 memavail=693692 print_time=5080.611 buffer_time=2.151 print_stall=0 extruder: target=220 temp=219.8 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5078.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7283795 bytes_read=2423599 bytes_retransmit=0 bytes_invalid=0 send_seq=154486 receive_seq=154486 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=5758 freq=180001349 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=29134 bytes_read=91665 bytes_retransmit=0 bytes_invalid=0 send_seq=4830 receive_seq=4830 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999301 sd_pos=1542354 heater_bed: target=60 temp=59.9 pwm=0.138 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.44 cputime=662.477 memavail=693480 print_time=5081.710 buffer_time=2.249 print_stall=0 extruder: target=220 temp=219.8 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5079.3: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7293256 bytes_read=2424829 bytes_retransmit=0 bytes_invalid=0 send_seq=154647 receive_seq=154646 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=7071 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=29140 bytes_read=91681 bytes_retransmit=0 bytes_invalid=0 send_seq=4831 receive_seq=4831 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999286 sd_pos=1544669 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=44.0 mcu_temp: temp=38.0 chamber: temp=29.3 sysload=1.44 cputime=663.249 memavail=693480 print_time=5083.133 buffer_time=2.671 print_stall=0 extruder: target=220 temp=219.6 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5080.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7299185 bytes_read=2425609 bytes_retransmit=0 bytes_invalid=0 send_seq=154747 receive_seq=154747 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=10936 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=29146 bytes_read=91697 bytes_retransmit=0 bytes_invalid=0 send_seq=4832 receive_seq=4832 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999276 sd_pos=1546894 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.49 cputime=663.832 memavail=693480 print_time=5084.238 buffer_time=2.616 print_stall=0 extruder: target=220 temp=219.6 pwm=0.621
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5081.4: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7306361 bytes_read=2426679 bytes_retransmit=0 bytes_invalid=0 send_seq=154873 receive_seq=154873 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=4637 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=29152 bytes_read=91713 bytes_retransmit=0 bytes_invalid=0 send_seq=4833 receive_seq=4833 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999308 sd_pos=1548282 heater_bed: target=60 temp=60.0 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.6 sysload=1.49 cputime=664.380 memavail=693484 print_time=5084.238 buffer_time=1.601 print_stall=0 extruder: target=220 temp=219.8 pwm=0.606
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5082.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7315601 bytes_read=2427874 bytes_retransmit=0 bytes_invalid=0 send_seq=155030 receive_seq=155030 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=6470 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=29158 bytes_read=91742 bytes_retransmit=0 bytes_invalid=0 send_seq=4834 receive_seq=4834 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999334 sd_pos=1549683 heater_bed: target=60 temp=59.9 pwm=0.122 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.49 cputime=664.614 memavail=693484 print_time=5085.736 buffer_time=2.098 print_stall=0 extruder: target=220 temp=219.9 pwm=0.606
Stats 5083.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7324510 bytes_read=2429040 bytes_retransmit=0 bytes_invalid=0 send_seq=155180 receive_seq=155180 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=5051 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=29164 bytes_read=91758 bytes_retransmit=0 bytes_invalid=0 send_seq=4835 receive_seq=4835 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999337 sd_pos=1553042 heater_bed: target=60 temp=60.1 pwm=0.000 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.4 sysload=1.49 cputime=664.861 memavail=693484 print_time=5086.946 buffer_time=2.307 print_stall=0 extruder: target=220 temp=220.0 pwm=0.553
Stats 5084.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7331542 bytes_read=2430089 bytes_retransmit=0 bytes_invalid=0 send_seq=155301 receive_seq=155301 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=3853 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=29170 bytes_read=91774 bytes_retransmit=0 bytes_invalid=0 send_seq=4836 receive_seq=4836 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999354 sd_pos=1555477 heater_bed: target=60 temp=60.0 pwm=0.131 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.49 cputime=665.093 memavail=693496 print_time=5087.884 buffer_time=2.244 print_stall=0 extruder: target=220 temp=220.2 pwm=0.553
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5085.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7337863 bytes_read=2431030 bytes_retransmit=0 bytes_invalid=0 send_seq=155409 receive_seq=155409 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=3595 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=29176 bytes_read=91790 bytes_retransmit=0 bytes_invalid=0 send_seq=4837 receive_seq=4837 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999347 sd_pos=1557900 heater_bed: target=60 temp=60.0 pwm=0.064 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.45 cputime=665.411 memavail=693616 print_time=5088.779 buffer_time=2.139 print_stall=0 extruder: target=220 temp=220.2 pwm=0.553
Stats 5086.4: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7343925 bytes_read=2431976 bytes_retransmit=0 bytes_invalid=0 send_seq=155515 receive_seq=155515 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=5698 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=29182 bytes_read=91806 bytes_retransmit=0 bytes_invalid=0 send_seq=4838 receive_seq=4838 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999350 sd_pos=1561440 heater_bed: target=60 temp=60.0 pwm=0.070 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.45 cputime=665.655 memavail=693616 print_time=5090.149 buffer_time=2.508 print_stall=0 extruder: target=220 temp=220.3 pwm=0.553
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5087.5: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7351360 bytes_read=2433086 bytes_retransmit=0 bytes_invalid=0 send_seq=155644 receive_seq=155643 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=4480 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29188 bytes_read=91835 bytes_retransmit=0 bytes_invalid=0 send_seq=4839 receive_seq=4839 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999380 sd_pos=1563791 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.45 cputime=666.067 memavail=693624 print_time=5090.960 buffer_time=2.218 print_stall=0 extruder: target=220 temp=220.4 pwm=0.548
Stats 5088.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7357968 bytes_read=2434096 bytes_retransmit=0 bytes_invalid=0 send_seq=155757 receive_seq=155756 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=5525 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29194 bytes_read=91851 bytes_retransmit=0 bytes_invalid=0 send_seq=4840 receive_seq=4840 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999387 sd_pos=1567251 heater_bed: target=60 temp=60.0 pwm=0.097 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.45 cputime=666.320 memavail=693624 print_time=5092.224 buffer_time=2.431 print_stall=0 extruder: target=220 temp=220.3 pwm=0.548
Stats 5089.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7364854 bytes_read=2435131 bytes_retransmit=0 bytes_invalid=0 send_seq=155878 receive_seq=155878 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=4619 freq=180001315 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29200 bytes_read=91867 bytes_retransmit=0 bytes_invalid=0 send_seq=4841 receive_seq=4841 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999366 sd_pos=1569614 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.45 cputime=666.520 memavail=693808 print_time=5093.178 buffer_time=2.368 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5090.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7371232 bytes_read=2436067 bytes_retransmit=0 bytes_invalid=0 send_seq=155986 receive_seq=155985 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=3744 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29206 bytes_read=91883 bytes_retransmit=0 bytes_invalid=0 send_seq=4842 receive_seq=4842 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999377 sd_pos=1571655 heater_bed: target=60 temp=60.0 pwm=0.081 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.41 cputime=666.802 memavail=693888 print_time=5093.951 buffer_time=2.141 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
Stats 5091.6: gcodein=0  mcu: mcu_awake=0.021 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7377252 bytes_read=2437027 bytes_retransmit=0 bytes_invalid=0 send_seq=156089 receive_seq=156088 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2270 freq=180001312 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29212 bytes_read=91899 bytes_retransmit=0 bytes_invalid=0 send_seq=4843 receive_seq=4843 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999392 sd_pos=1573580 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.41 cputime=666.988 memavail=693888 print_time=5094.813 buffer_time=2.001 print_stall=0 extruder: target=220 temp=220.1 pwm=0.600
Stats 5092.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7383967 bytes_read=2438033 bytes_retransmit=0 bytes_invalid=0 send_seq=156203 receive_seq=156203 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=892 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29218 bytes_read=91928 bytes_retransmit=0 bytes_invalid=0 send_seq=4844 receive_seq=4844 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999389 sd_pos=1575741 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.41 cputime=667.193 memavail=693588 print_time=5095.821 buffer_time=2.008 print_stall=0 extruder: target=220 temp=220.1 pwm=0.600
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5093.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7389256 bytes_read=2438899 bytes_retransmit=0 bytes_invalid=0 send_seq=156294 receive_seq=156294 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=3214 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29224 bytes_read=91944 bytes_retransmit=0 bytes_invalid=0 send_seq=4845 receive_seq=4845 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999285 sd_pos=1578250 heater_bed: target=60 temp=59.8 pwm=0.220 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.41 cputime=667.616 memavail=693640 print_time=5096.963 buffer_time=2.150 print_stall=0 extruder: target=220 temp=220.0 pwm=0.600
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5094.6: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7394754 bytes_read=2439814 bytes_retransmit=0 bytes_invalid=0 send_seq=156388 receive_seq=156388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=1914 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29230 bytes_read=91960 bytes_retransmit=0 bytes_invalid=0 send_seq=4846 receive_seq=4846 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999300 sd_pos=1578833 heater_bed: target=60 temp=59.8 pwm=0.139 raspberry_pi: temp=42.9 mcu_temp: temp=37.9 chamber: temp=29.4 sysload=1.41 cputime=667.808 memavail=693640 print_time=5097.986 buffer_time=2.172 print_stall=0 extruder: target=220 temp=220.0 pwm=0.600
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5095.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7399803 bytes_read=2440678 bytes_retransmit=0 bytes_invalid=0 send_seq=156472 receive_seq=156472 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29236 bytes_read=91976 bytes_retransmit=0 bytes_invalid=0 send_seq=4847 receive_seq=4847 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999338 sd_pos=1581055 heater_bed: target=60 temp=59.8 pwm=0.139 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.3 sysload=1.38 cputime=668.170 memavail=693536 print_time=5098.802 buffer_time=1.846 print_stall=0 extruder: target=220 temp=220.1 pwm=0.523
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5096.8: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7406554 bytes_read=2441703 bytes_retransmit=0 bytes_invalid=0 send_seq=156589 receive_seq=156589 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=2375 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29242 bytes_read=91992 bytes_retransmit=0 bytes_invalid=0 send_seq=4848 receive_seq=4848 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999314 sd_pos=1581377 heater_bed: target=60 temp=59.8 pwm=0.211 raspberry_pi: temp=43.5 mcu_temp: temp=37.9 chamber: temp=29.5 sysload=1.38 cputime=668.401 memavail=693648 print_time=5100.017 buffer_time=2.061 print_stall=0 extruder: target=220 temp=220.3 pwm=0.523
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5097.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7410230 bytes_read=2442435 bytes_retransmit=0 bytes_invalid=0 send_seq=156652 receive_seq=156652 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=6423 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29248 bytes_read=92021 bytes_retransmit=0 bytes_invalid=0 send_seq=4849 receive_seq=4849 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999316 sd_pos=1582791 heater_bed: target=60 temp=59.8 pwm=0.145 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.38 cputime=668.990 memavail=693656 print_time=5101.392 buffer_time=2.434 print_stall=0 extruder: target=220 temp=220.2 pwm=0.523
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5098.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7418679 bytes_read=2443601 bytes_retransmit=0 bytes_invalid=0 send_seq=156801 receive_seq=156800 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=3215 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29254 bytes_read=92037 bytes_retransmit=0 bytes_invalid=0 send_seq=4850 receive_seq=4850 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999263 sd_pos=1584058 heater_bed: target=60 temp=59.8 pwm=0.207 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.38 cputime=669.269 memavail=693552 print_time=5102.158 buffer_time=2.200 print_stall=0 extruder: target=220 temp=220.2 pwm=0.523
Stats 5099.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7423222 bytes_read=2444440 bytes_retransmit=0 bytes_invalid=0 send_seq=156879 receive_seq=156879 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=2261 freq=180001356 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29260 bytes_read=92053 bytes_retransmit=0 bytes_invalid=0 send_seq=4851 receive_seq=4851 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999240 sd_pos=1584705 heater_bed: target=60 temp=59.7 pwm=0.207 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.38 cputime=669.433 memavail=693656 print_time=5103.383 buffer_time=2.424 print_stall=0 extruder: target=220 temp=220.0 pwm=0.554
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5100.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7431220 bytes_read=2445541 bytes_retransmit=0 bytes_invalid=0 send_seq=157017 receive_seq=157017 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29266 bytes_read=92069 bytes_retransmit=0 bytes_invalid=0 send_seq=4852 receive_seq=4852 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999264 sd_pos=1585728 heater_bed: target=60 temp=59.7 pwm=0.207 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.3 sysload=1.43 cputime=670.066 memavail=693656 print_time=5104.394 buffer_time=2.435 print_stall=0 extruder: target=220 temp=219.8 pwm=0.624
Stats 5101.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7433424 bytes_read=2446206 bytes_retransmit=0 bytes_invalid=0 send_seq=157064 receive_seq=157064 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29272 bytes_read=92085 bytes_retransmit=0 bytes_invalid=0 send_seq=4853 receive_seq=4853 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999255 sd_pos=1585925 heater_bed: target=60 temp=59.8 pwm=0.156 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.43 cputime=670.199 memavail=693552 print_time=5105.152 buffer_time=2.192 print_stall=0 extruder: target=220 temp=219.7 pwm=0.624
Stats 5102.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7435736 bytes_read=2446907 bytes_retransmit=0 bytes_invalid=0 send_seq=157113 receive_seq=157113 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29278 bytes_read=92114 bytes_retransmit=0 bytes_invalid=0 send_seq=4854 receive_seq=4854 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999236 sd_pos=1586396 heater_bed: target=60 temp=59.7 pwm=0.222 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.43 cputime=670.376 memavail=693668 print_time=5106.047 buffer_time=2.087 print_stall=0 extruder: target=220 temp=219.6 pwm=0.624
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5104.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7443709 bytes_read=2448081 bytes_retransmit=0 bytes_invalid=0 send_seq=157256 receive_seq=157254 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=1057 freq=180001374 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29284 bytes_read=92130 bytes_retransmit=0 bytes_invalid=0 send_seq=4855 receive_seq=4855 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999217 sd_pos=1587825 heater_bed: target=60 temp=59.7 pwm=0.141 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.43 cputime=671.013 memavail=693668 print_time=5107.921 buffer_time=2.697 print_stall=0 extruder: target=220 temp=219.6 pwm=0.624
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5105.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7446286 bytes_read=2448764 bytes_retransmit=0 bytes_invalid=0 send_seq=157310 receive_seq=157310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=7076 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29290 bytes_read=92146 bytes_retransmit=0 bytes_invalid=0 send_seq=4856 receive_seq=4856 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999266 sd_pos=1589708 heater_bed: target=60 temp=59.7 pwm=0.141 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.43 cputime=671.297 memavail=693560 print_time=5108.897 buffer_time=2.674 print_stall=0 extruder: target=220 temp=219.6 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5106.0: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7448965 bytes_read=2449481 bytes_retransmit=0 bytes_invalid=0 send_seq=157365 receive_seq=157365 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=14357 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29296 bytes_read=92162 bytes_retransmit=0 bytes_invalid=0 send_seq=4857 receive_seq=4857 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999326 sd_pos=1591939 heater_bed: target=60 temp=59.7 pwm=0.196 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.47 cputime=671.639 memavail=693672 print_time=5110.000 buffer_time=2.775 print_stall=0 extruder: target=220 temp=219.6 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5107.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7458515 bytes_read=2450717 bytes_retransmit=0 bytes_invalid=0 send_seq=157526 receive_seq=157526 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=10522 freq=180001391 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29302 bytes_read=92178 bytes_retransmit=0 bytes_invalid=0 send_seq=4858 receive_seq=4858 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999248 sd_pos=1593112 heater_bed: target=60 temp=59.9 pwm=0.002 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=1.47 cputime=672.081 memavail=693672 print_time=5110.764 buffer_time=2.460 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
Stats 5108.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7468090 bytes_read=2451962 bytes_retransmit=0 bytes_invalid=0 send_seq=157686 receive_seq=157686 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=6513 freq=180001387 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29308 bytes_read=92207 bytes_retransmit=0 bytes_invalid=0 send_seq=4859 receive_seq=4859 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999258 sd_pos=1595235 heater_bed: target=60 temp=59.8 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.47 cputime=672.284 memavail=693292 print_time=5111.633 buffer_time=2.328 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 5109.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7477239 bytes_read=2453152 bytes_retransmit=0 bytes_invalid=0 send_seq=157841 receive_seq=157841 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=2121 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29314 bytes_read=92223 bytes_retransmit=0 bytes_invalid=0 send_seq=4860 receive_seq=4860 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999235 sd_pos=1597442 heater_bed: target=60 temp=59.8 pwm=0.174 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.47 cputime=672.507 memavail=693432 print_time=5112.342 buffer_time=2.037 print_stall=0 extruder: target=220 temp=219.9 pwm=0.592
Stats 5110.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7482819 bytes_read=2454043 bytes_retransmit=0 bytes_invalid=0 send_seq=157939 receive_seq=157939 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=3042 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29320 bytes_read=92239 bytes_retransmit=0 bytes_invalid=0 send_seq=4861 receive_seq=4861 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999227 sd_pos=1599845 heater_bed: target=60 temp=59.8 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.47 cputime=672.730 memavail=693432 print_time=5113.354 buffer_time=2.049 print_stall=0 extruder: target=220 temp=219.9 pwm=0.592
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5111.1: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7488799 bytes_read=2455003 bytes_retransmit=0 bytes_invalid=0 send_seq=158042 receive_seq=158042 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=4982 freq=180001380 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29326 bytes_read=92255 bytes_retransmit=0 bytes_invalid=0 send_seq=4862 receive_seq=4862 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999251 sd_pos=1603338 heater_bed: target=60 temp=59.8 pwm=0.174 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.43 cputime=673.118 memavail=693440 print_time=5114.620 buffer_time=2.315 print_stall=0 extruder: target=220 temp=220.0 pwm=0.592
Stats 5112.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7495344 bytes_read=2456004 bytes_retransmit=0 bytes_invalid=0 send_seq=158154 receive_seq=158154 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=4131 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29332 bytes_read=92271 bytes_retransmit=0 bytes_invalid=0 send_seq=4863 receive_seq=4863 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999244 sd_pos=1605786 heater_bed: target=60 temp=59.9 pwm=0.131 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.43 cputime=673.328 memavail=693440 print_time=5115.543 buffer_time=2.237 print_stall=0 extruder: target=220 temp=220.1 pwm=0.592
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5113.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7501880 bytes_read=2456955 bytes_retransmit=0 bytes_invalid=0 send_seq=158264 receive_seq=158264 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=3957 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29338 bytes_read=92300 bytes_retransmit=0 bytes_invalid=0 send_seq=4864 receive_seq=4864 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999242 sd_pos=1608130 heater_bed: target=60 temp=59.8 pwm=0.131 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.43 cputime=673.737 memavail=693440 print_time=5116.508 buffer_time=2.202 print_stall=0 extruder: target=220 temp=220.2 pwm=0.540
Stats 5114.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7507959 bytes_read=2457944 bytes_retransmit=0 bytes_invalid=0 send_seq=158370 receive_seq=158370 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=5295 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29344 bytes_read=92316 bytes_retransmit=0 bytes_invalid=0 send_seq=4865 receive_seq=4865 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999219 sd_pos=1611483 heater_bed: target=60 temp=59.8 pwm=0.222 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.43 cputime=673.959 memavail=693336 print_time=5117.746 buffer_time=2.412 print_stall=0 extruder: target=220 temp=220.2 pwm=0.540
Stats 5115.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7514818 bytes_read=2458930 bytes_retransmit=0 bytes_invalid=0 send_seq=158485 receive_seq=158485 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=3545 freq=180001373 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29350 bytes_read=92332 bytes_retransmit=0 bytes_invalid=0 send_seq=4866 receive_seq=4866 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999219 sd_pos=1613704 heater_bed: target=60 temp=59.8 pwm=0.153 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.43 cputime=674.192 memavail=693444 print_time=5118.547 buffer_time=2.213 print_stall=0 extruder: target=220 temp=220.3 pwm=0.540
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5116.1: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7520922 bytes_read=2459866 bytes_retransmit=0 bytes_invalid=0 send_seq=158589 receive_seq=158589 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=4043 freq=180001396 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29356 bytes_read=92348 bytes_retransmit=0 bytes_invalid=0 send_seq=4867 receive_seq=4867 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999225 sd_pos=1616151 heater_bed: target=60 temp=59.8 pwm=0.206 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=1.32 cputime=674.565 memavail=693444 print_time=5119.642 buffer_time=2.307 print_stall=0 extruder: target=220 temp=220.4 pwm=0.540
Stats 5117.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7526973 bytes_read=2460856 bytes_retransmit=0 bytes_invalid=0 send_seq=158695 receive_seq=158695 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=2868 freq=180001387 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29362 bytes_read=92364 bytes_retransmit=0 bytes_invalid=0 send_seq=4868 receive_seq=4868 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999167 sd_pos=1618247 heater_bed: target=60 temp=59.9 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.32 cputime=674.809 memavail=693228 print_time=5120.558 buffer_time=2.223 print_stall=0 extruder: target=220 temp=220.2 pwm=0.561
Stats 5118.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7533538 bytes_read=2461832 bytes_retransmit=0 bytes_invalid=0 send_seq=158809 receive_seq=158808 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=1573 freq=180001383 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29368 bytes_read=92393 bytes_retransmit=0 bytes_invalid=0 send_seq=4869 receive_seq=4869 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999219 sd_pos=1620432 heater_bed: target=60 temp=59.8 pwm=0.191 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.32 cputime=675.003 memavail=693456 print_time=5121.478 buffer_time=2.142 print_stall=0 extruder: target=220 temp=220.1 pwm=0.561
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5119.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7538796 bytes_read=2462728 bytes_retransmit=0 bytes_invalid=0 send_seq=158904 receive_seq=158904 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=2858 freq=180001384 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29374 bytes_read=92408 bytes_retransmit=0 bytes_invalid=0 send_seq=4870 receive_seq=4870 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999229 sd_pos=1622371 heater_bed: target=60 temp=59.9 pwm=0.155 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.32 cputime=675.518 memavail=693456 print_time=5122.771 buffer_time=2.436 print_stall=0 extruder: target=220 temp=220.1 pwm=0.561
Stats 5120.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7544457 bytes_read=2463672 bytes_retransmit=0 bytes_invalid=0 send_seq=159004 receive_seq=159004 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=97 freq=180001382 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29380 bytes_read=92423 bytes_retransmit=0 bytes_invalid=0 send_seq=4871 receive_seq=4871 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999237 sd_pos=1622757 heater_bed: target=60 temp=59.9 pwm=0.141 raspberry_pi: temp=41.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.32 cputime=675.680 memavail=693456 print_time=5123.542 buffer_time=2.206 print_stall=0 extruder: target=220 temp=219.9 pwm=0.623
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5121.1: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=7550573 bytes_read=2464638 bytes_retransmit=0 bytes_invalid=0 send_seq=159115 receive_seq=159115 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4994 freq=180001379 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29386 bytes_read=92438 bytes_retransmit=0 bytes_invalid=0 send_seq=4872 receive_seq=4872 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999233 sd_pos=1625334 heater_bed: target=60 temp=59.8 pwm=0.205 raspberry_pi: temp=41.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=1.21 cputime=676.114 memavail=693456 print_time=5124.999 buffer_time=2.663 print_stall=0 extruder: target=220 temp=219.9 pwm=0.623
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5122.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7553963 bytes_read=2465400 bytes_retransmit=0 bytes_invalid=0 send_seq=159181 receive_seq=159181 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3867 freq=180001383 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29392 bytes_read=92453 bytes_retransmit=0 bytes_invalid=0 send_seq=4873 receive_seq=4873 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999251 sd_pos=1625750 heater_bed: target=60 temp=59.9 pwm=0.101 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.2 sysload=1.21 cputime=676.343 memavail=693456 print_time=5125.662 buffer_time=2.326 print_stall=0 extruder: target=220 temp=219.8 pwm=0.623
Stats 5123.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7559936 bytes_read=2466399 bytes_retransmit=0 bytes_invalid=0 send_seq=159290 receive_seq=159290 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=1368 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29398 bytes_read=92481 bytes_retransmit=0 bytes_invalid=0 send_seq=4874 receive_seq=4874 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999261 sd_pos=1626440 heater_bed: target=60 temp=59.9 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=1.21 cputime=676.510 memavail=693216 print_time=5126.482 buffer_time=2.144 print_stall=0 extruder: target=220 temp=220.0 pwm=0.568
Stats 5124.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7564708 bytes_read=2467205 bytes_retransmit=0 bytes_invalid=0 send_seq=159372 receive_seq=159371 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29404 bytes_read=92497 bytes_retransmit=0 bytes_invalid=0 send_seq=4875 receive_seq=4875 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999296 sd_pos=1626863 heater_bed: target=60 temp=59.9 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.21 cputime=676.702 memavail=693216 print_time=5127.680 buffer_time=2.342 print_stall=0 extruder: target=220 temp=220.0 pwm=0.568
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5125.3: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7569180 bytes_read=2468109 bytes_retransmit=0 bytes_invalid=0 send_seq=159459 receive_seq=159458 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001379 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29410 bytes_read=92513 bytes_retransmit=0 bytes_invalid=0 send_seq=4876 receive_seq=4876 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999324 sd_pos=1627728 heater_bed: target=60 temp=59.9 pwm=0.145 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=1.21 cputime=677.184 memavail=693216 print_time=5128.872 buffer_time=2.418 print_stall=0 extruder: target=220 temp=220.2 pwm=0.568
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5126.4: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7574234 bytes_read=2469039 bytes_retransmit=0 bytes_invalid=0 send_seq=159554 receive_seq=159553 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=3536 freq=180001376 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29416 bytes_read=92529 bytes_retransmit=0 bytes_invalid=0 send_seq=4877 receive_seq=4877 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999304 sd_pos=1629266 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=1.20 cputime=677.721 memavail=693228 print_time=5130.245 buffer_time=2.656 print_stall=0 extruder: target=220 temp=220.1 pwm=0.568
Stats 5127.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7576863 bytes_read=2469740 bytes_retransmit=0 bytes_invalid=0 send_seq=159605 receive_seq=159605 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3399 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29422 bytes_read=92545 bytes_retransmit=0 bytes_invalid=0 send_seq=4878 receive_seq=4878 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999275 sd_pos=1629494 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.20 cputime=677.852 memavail=693928 print_time=5131.025 buffer_time=2.435 print_stall=0 extruder: target=220 temp=220.0 pwm=0.597
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5128.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7583502 bytes_read=2470770 bytes_retransmit=0 bytes_invalid=0 send_seq=159718 receive_seq=159718 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=4751 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29434 bytes_read=92590 bytes_retransmit=0 bytes_invalid=0 send_seq=4880 receive_seq=4880 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999280 sd_pos=1630959 heater_bed: target=60 temp=59.9 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.20 cputime=678.450 memavail=693984 print_time=5132.583 buffer_time=2.802 print_stall=0 extruder: target=220 temp=219.9 pwm=0.597
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5129.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7590500 bytes_read=2471808 bytes_retransmit=0 bytes_invalid=0 send_seq=159836 receive_seq=159835 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=5478 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29440 bytes_read=92606 bytes_retransmit=0 bytes_invalid=0 send_seq=4881 receive_seq=4881 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999303 sd_pos=1632695 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=1.20 cputime=679.033 memavail=693732 print_time=5133.485 buffer_time=2.448 print_stall=0 extruder: target=220 temp=219.8 pwm=0.597
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5130.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7594129 bytes_read=2472569 bytes_retransmit=0 bytes_invalid=0 send_seq=159904 receive_seq=159904 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=11446 freq=180001365 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29446 bytes_read=92622 bytes_retransmit=0 bytes_invalid=0 send_seq=4882 receive_seq=4882 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999279 sd_pos=1634797 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=44.0 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.10 cputime=679.513 memavail=693732 print_time=5134.647 buffer_time=2.609 print_stall=0 extruder: target=220 temp=219.7 pwm=0.597
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5131.8: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7602509 bytes_read=2473718 bytes_retransmit=0 bytes_invalid=0 send_seq=160044 receive_seq=160043 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=6569 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29452 bytes_read=92638 bytes_retransmit=0 bytes_invalid=0 send_seq=4883 receive_seq=4883 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999259 sd_pos=1636028 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.10 cputime=679.778 memavail=693628 print_time=5135.147 buffer_time=2.108 print_stall=0 extruder: target=220 temp=219.6 pwm=0.647
Stats 5132.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=7611711 bytes_read=2474915 bytes_retransmit=0 bytes_invalid=0 send_seq=160199 receive_seq=160199 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=4618 freq=180001360 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=29458 bytes_read=92667 bytes_retransmit=0 bytes_invalid=0 send_seq=4884 receive_seq=4884 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999251 sd_pos=1639200 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=1.10 cputime=679.997 memavail=693740 print_time=5136.352 buffer_time=2.313 print_stall=0 extruder: target=220 temp=219.6 pwm=0.647
Stats 5133.8: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=7618377 bytes_read=2475891 bytes_retransmit=0 bytes_invalid=0 send_seq=160311 receive_seq=160311 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=2521 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=29464 bytes_read=92683 bytes_retransmit=0 bytes_invalid=0 send_seq=4885 receive_seq=4885 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999232 sd_pos=1641381 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.10 cputime=680.180 memavail=693740 print_time=5137.077 buffer_time=2.037 print_stall=0 extruder: target=220 temp=219.6 pwm=0.647
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5134.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=7624578 bytes_read=2476865 bytes_retransmit=0 bytes_invalid=0 send_seq=160417 receive_seq=160417 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=5069 freq=180001349 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=29470 bytes_read=92699 bytes_retransmit=0 bytes_invalid=0 send_seq=4886 receive_seq=4886 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999211 sd_pos=1644863 heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.3 sysload=1.10 cputime=680.602 memavail=693636 print_time=5138.478 buffer_time=2.414 print_stall=0 extruder: target=220 temp=219.8 pwm=0.580
Stats 5135.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=7630764 bytes_read=2477811 bytes_retransmit=0 bytes_invalid=0 send_seq=160524 receive_seq=160524 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=4162 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=29476 bytes_read=92715 bytes_retransmit=0 bytes_invalid=0 send_seq=4887 receive_seq=4887 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999230 sd_pos=1647144 heater_bed: target=60 temp=60.0 pwm=0.152 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=1.01 cputime=680.801 memavail=693748 print_time=5139.335 buffer_time=2.270 print_stall=0 extruder: target=220 temp=220.0 pwm=0.580
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5136.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=7637413 bytes_read=2478811 bytes_retransmit=0 bytes_invalid=0 send_seq=160638 receive_seq=160638 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=3101 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000009 bytes_write=29482 bytes_read=92731 bytes_retransmit=0 bytes_invalid=0 send_seq=4888 receive_seq=4888 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999220 sd_pos=1649324 heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.01 cputime=681.156 memavail=693748 print_time=5140.147 buffer_time=2.082 print_stall=0 extruder: target=220 temp=220.3 pwm=0.528
Stats 5137.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7643280 bytes_read=2479762 bytes_retransmit=0 bytes_invalid=0 send_seq=160739 receive_seq=160739 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=4279 freq=180001340 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=29488 bytes_read=92760 bytes_retransmit=0 bytes_invalid=0 send_seq=4889 receive_seq=4889 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999225 sd_pos=1652662 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=1.01 cputime=681.376 memavail=693708 print_time=5141.340 buffer_time=2.274 print_stall=0 extruder: target=220 temp=220.5 pwm=0.528
Stats 5138.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7649876 bytes_read=2480748 bytes_retransmit=0 bytes_invalid=0 send_seq=160854 receive_seq=160854 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=24 stalled_bytes=2865 freq=180001333 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=29494 bytes_read=92776 bytes_retransmit=0 bytes_invalid=0 send_seq=4890 receive_seq=4890 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999633 adj=49999234 sd_pos=1654816 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.01 cputime=681.576 memavail=693760 print_time=5142.127 buffer_time=2.060 print_stall=0 extruder: target=220 temp=220.6 pwm=0.468
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5139.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7655985 bytes_read=2481723 bytes_retransmit=0 bytes_invalid=0 send_seq=160960 receive_seq=160960 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=3130 freq=180001337 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=29500 bytes_read=92792 bytes_retransmit=0 bytes_invalid=0 send_seq=4891 receive_seq=4891 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999245 sd_pos=1657381 heater_bed: target=60 temp=60.1 pwm=0.123 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.01 cputime=681.942 memavail=693760 print_time=5143.164 buffer_time=2.096 print_stall=0 extruder: target=220 temp=220.5 pwm=0.535
Stats 5140.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7662212 bytes_read=2482668 bytes_retransmit=0 bytes_invalid=0 send_seq=161066 receive_seq=161066 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=1854 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=29506 bytes_read=92808 bytes_retransmit=0 bytes_invalid=0 send_seq=4892 receive_seq=4892 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999251 sd_pos=1659499 heater_bed: target=60 temp=60.0 pwm=0.202 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=0.93 cputime=682.184 memavail=693676 print_time=5144.093 buffer_time=2.024 print_stall=0 extruder: target=220 temp=220.3 pwm=0.535
Stats 5141.9: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7668446 bytes_read=2483619 bytes_retransmit=0 bytes_invalid=0 send_seq=161174 receive_seq=161174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=1080 freq=180001343 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000008 bytes_write=29512 bytes_read=92824 bytes_retransmit=0 bytes_invalid=0 send_seq=4893 receive_seq=4893 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999250 sd_pos=1661777 heater_bed: target=60 temp=60.0 pwm=0.202 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=0.93 cputime=682.379 memavail=693764 print_time=5145.084 buffer_time=2.014 print_stall=0 extruder: target=220 temp=220.1 pwm=0.585
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5142.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7673609 bytes_read=2484535 bytes_retransmit=0 bytes_invalid=0 send_seq=161265 receive_seq=161265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=2352 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=29518 bytes_read=92853 bytes_retransmit=0 bytes_invalid=0 send_seq=4894 receive_seq=4894 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999632 adj=49999230 sd_pos=1663525 heater_bed: target=60 temp=59.9 pwm=0.202 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=0.93 cputime=682.836 memavail=693764 print_time=5146.246 buffer_time=2.165 print_stall=0 extruder: target=220 temp=219.9 pwm=0.585
Stats 5143.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7679182 bytes_read=2485430 bytes_retransmit=0 bytes_invalid=0 send_seq=161361 receive_seq=161361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=1696 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=29524 bytes_read=92869 bytes_retransmit=0 bytes_invalid=0 send_seq=4895 receive_seq=4895 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999224 sd_pos=1664453 heater_bed: target=60 temp=59.9 pwm=0.202 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=0.93 cputime=682.990 memavail=693660 print_time=5147.693 buffer_time=2.613 print_stall=0 extruder: target=220 temp=219.8 pwm=0.641
Stats 5144.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7682455 bytes_read=2486151 bytes_retransmit=0 bytes_invalid=0 send_seq=161423 receive_seq=161423 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=29530 bytes_read=92885 bytes_retransmit=0 bytes_invalid=0 send_seq=4896 receive_seq=4896 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999271 sd_pos=1664682 heater_bed: target=60 temp=59.9 pwm=0.148 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=0.93 cputime=683.103 memavail=693772 print_time=5148.108 buffer_time=2.027 print_stall=0 extruder: target=220 temp=219.7 pwm=0.641
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5145.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7688561 bytes_read=2487131 bytes_retransmit=0 bytes_invalid=0 send_seq=161530 receive_seq=161530 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=2836 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=29536 bytes_read=92901 bytes_retransmit=0 bytes_invalid=0 send_seq=4897 receive_seq=4897 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999273 sd_pos=1666568 heater_bed: target=60 temp=59.9 pwm=0.148 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=1.02 cputime=683.901 memavail=693772 print_time=5149.478 buffer_time=2.396 print_stall=0 extruder: target=220 temp=219.7 pwm=0.641
Stats 5146.9: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7692187 bytes_read=2487886 bytes_retransmit=0 bytes_invalid=0 send_seq=161596 receive_seq=161596 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=2145 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=29542 bytes_read=92917 bytes_retransmit=0 bytes_invalid=0 send_seq=4898 receive_seq=4898 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999258 sd_pos=1666993 heater_bed: target=60 temp=60.0 pwm=0.092 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=1.02 cputime=684.055 memavail=693668 print_time=5150.553 buffer_time=2.471 print_stall=0 extruder: target=220 temp=219.9 pwm=0.576
Stats 5147.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7695831 bytes_read=2488623 bytes_retransmit=0 bytes_invalid=0 send_seq=161660 receive_seq=161660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29548 bytes_read=92946 bytes_retransmit=0 bytes_invalid=0 send_seq=4899 receive_seq=4899 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999274 sd_pos=1667272 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=1.02 cputime=684.216 memavail=693524 print_time=5151.141 buffer_time=2.058 print_stall=0 extruder: target=220 temp=220.2 pwm=0.484
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5148.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7701395 bytes_read=2489603 bytes_retransmit=0 bytes_invalid=0 send_seq=161765 receive_seq=161765 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29554 bytes_read=92962 bytes_retransmit=0 bytes_invalid=0 send_seq=4900 receive_seq=4900 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999277 sd_pos=1668306 heater_bed: target=60 temp=60.0 pwm=0.171 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.3 sysload=1.02 cputime=684.800 memavail=693524 print_time=5152.192 buffer_time=2.109 print_stall=0 extruder: target=220 temp=220.3 pwm=0.484
Stats 5149.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7704994 bytes_read=2490378 bytes_retransmit=0 bytes_invalid=0 send_seq=161835 receive_seq=161835 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29560 bytes_read=92978 bytes_retransmit=0 bytes_invalid=0 send_seq=4901 receive_seq=4901 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999279 sd_pos=1668763 heater_bed: target=60 temp=60.1 pwm=0.171 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=1.02 cputime=684.973 memavail=693456 print_time=5153.466 buffer_time=2.381 print_stall=0 extruder: target=220 temp=220.2 pwm=0.557
Stats 5150.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7707789 bytes_read=2491069 bytes_retransmit=0 bytes_invalid=0 send_seq=161893 receive_seq=161893 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29566 bytes_read=92994 bytes_retransmit=0 bytes_invalid=0 send_seq=4902 receive_seq=4902 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999232 sd_pos=1669199 heater_bed: target=60 temp=60.0 pwm=0.188 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.02 cputime=685.144 memavail=693536 print_time=5154.492 buffer_time=2.405 print_stall=0 extruder: target=220 temp=220.1 pwm=0.557
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5152.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7713417 bytes_read=2492043 bytes_retransmit=0 bytes_invalid=0 send_seq=161996 receive_seq=161994 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29572 bytes_read=93010 bytes_retransmit=0 bytes_invalid=0 send_seq=4903 receive_seq=4903 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999240 sd_pos=1670146 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.02 cputime=685.695 memavail=693536 print_time=5155.672 buffer_time=2.488 print_stall=0 extruder: target=220 temp=219.8 pwm=0.609
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5153.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7716987 bytes_read=2492780 bytes_retransmit=0 bytes_invalid=0 send_seq=162066 receive_seq=162066 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=7423 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29578 bytes_read=93039 bytes_retransmit=0 bytes_invalid=0 send_seq=4904 receive_seq=4904 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999274 sd_pos=1672636 heater_bed: target=60 temp=60.0 pwm=0.120 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.02 cputime=686.279 memavail=693424 print_time=5156.884 buffer_time=2.700 print_stall=0 extruder: target=220 temp=219.5 pwm=0.672
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5154.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7719868 bytes_read=2493537 bytes_retransmit=0 bytes_invalid=0 send_seq=162122 receive_seq=162121 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=14125 freq=180001359 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29584 bytes_read=93055 bytes_retransmit=0 bytes_invalid=0 send_seq=4905 receive_seq=4905 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999304 sd_pos=1675033 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=1.02 cputime=686.604 memavail=693544 print_time=5157.995 buffer_time=2.811 print_stall=0 extruder: target=220 temp=219.4 pwm=0.672
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5155.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7728779 bytes_read=2494697 bytes_retransmit=0 bytes_invalid=0 send_seq=162270 receive_seq=162270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=9067 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29590 bytes_read=93071 bytes_retransmit=0 bytes_invalid=0 send_seq=4906 receive_seq=4906 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999287 sd_pos=1675670 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=1.02 cputime=686.884 memavail=693544 print_time=5158.601 buffer_time=2.416 print_stall=0 extruder: target=220 temp=219.4 pwm=0.672
Stats 5156.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7737748 bytes_read=2495830 bytes_retransmit=0 bytes_invalid=0 send_seq=162420 receive_seq=162420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=4231 freq=180001362 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29596 bytes_read=93087 bytes_retransmit=0 bytes_invalid=0 send_seq=4907 receive_seq=4907 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999285 sd_pos=1677604 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=1.09 cputime=687.071 memavail=693440 print_time=5159.197 buffer_time=2.011 print_stall=0 extruder: target=220 temp=219.5 pwm=0.672
Stats 5157.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=7745999 bytes_read=2496998 bytes_retransmit=0 bytes_invalid=0 send_seq=162561 receive_seq=162561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3587 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29602 bytes_read=93103 bytes_retransmit=0 bytes_invalid=0 send_seq=4908 receive_seq=4908 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999262 sd_pos=1680717 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.09 cputime=687.322 memavail=693560 print_time=5160.489 buffer_time=2.302 print_stall=0 extruder: target=220 temp=219.7 pwm=0.596
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5158.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7751749 bytes_read=2497924 bytes_retransmit=0 bytes_invalid=0 send_seq=162660 receive_seq=162660 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3216 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29608 bytes_read=93132 bytes_retransmit=0 bytes_invalid=0 send_seq=4909 receive_seq=4909 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999269 sd_pos=1682905 heater_bed: target=60 temp=60.1 pwm=0.143 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.09 cputime=687.640 memavail=693156 print_time=5161.343 buffer_time=2.156 print_stall=0 extruder: target=220 temp=220.1 pwm=0.528
Stats 5159.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7757360 bytes_read=2498787 bytes_retransmit=0 bytes_invalid=0 send_seq=162757 receive_seq=162756 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3908 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29614 bytes_read=93148 bytes_retransmit=0 bytes_invalid=0 send_seq=4910 receive_seq=4910 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999273 sd_pos=1685905 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.6 sysload=1.09 cputime=687.867 memavail=693548 print_time=5162.431 buffer_time=2.244 print_stall=0 extruder: target=220 temp=220.3 pwm=0.528
Stats 5160.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7763915 bytes_read=2499812 bytes_retransmit=0 bytes_invalid=0 send_seq=162870 receive_seq=162870 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2350 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29620 bytes_read=93164 bytes_retransmit=0 bytes_invalid=0 send_seq=4911 receive_seq=4911 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999260 sd_pos=1687975 heater_bed: target=60 temp=60.2 pwm=0.008 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.09 cputime=688.054 memavail=693684 print_time=5163.245 buffer_time=2.057 print_stall=0 extruder: target=220 temp=220.5 pwm=0.528
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5161.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7769882 bytes_read=2500747 bytes_retransmit=0 bytes_invalid=0 send_seq=162974 receive_seq=162974 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3113 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29626 bytes_read=93180 bytes_retransmit=0 bytes_invalid=0 send_seq=4912 receive_seq=4912 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999636 adj=49999194 sd_pos=1691023 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.09 cputime=688.404 memavail=693688 print_time=5164.275 buffer_time=2.086 print_stall=0 extruder: target=220 temp=220.6 pwm=0.474
Stats 5162.0: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000013 mcu_task_stddev=0.000014 bytes_write=7775763 bytes_read=2501553 bytes_retransmit=0 bytes_invalid=0 send_seq=163074 receive_seq=163073 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4877 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29632 bytes_read=93196 bytes_retransmit=0 bytes_invalid=0 send_seq=4913 receive_seq=4913 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999637 adj=49999198 sd_pos=1694281 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.09 cputime=688.679 memavail=693576 print_time=5165.599 buffer_time=2.410 print_stall=0 extruder: target=220 temp=220.5 pwm=0.474
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5163.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7782360 bytes_read=2502594 bytes_retransmit=0 bytes_invalid=0 send_seq=163187 receive_seq=163187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=3167 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29638 bytes_read=93225 bytes_retransmit=0 bytes_invalid=0 send_seq=4914 receive_seq=4914 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999634 adj=49999230 sd_pos=1696066 heater_bed: target=60 temp=60.1 pwm=0.147 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.09 cputime=688.985 memavail=693696 print_time=5166.324 buffer_time=2.134 print_stall=0 extruder: target=220 temp=220.3 pwm=0.552
Stats 5164.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7788138 bytes_read=2503509 bytes_retransmit=0 bytes_invalid=0 send_seq=163287 receive_seq=163287 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1951 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29644 bytes_read=93241 bytes_retransmit=0 bytes_invalid=0 send_seq=4915 receive_seq=4915 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999635 adj=49999208 sd_pos=1697871 heater_bed: target=60 temp=60.1 pwm=0.149 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.09 cputime=689.197 memavail=693696 print_time=5167.193 buffer_time=2.002 print_stall=0 extruder: target=220 temp=220.0 pwm=0.618
Stats 5165.0: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7794752 bytes_read=2504480 bytes_retransmit=0 bytes_invalid=0 send_seq=163401 receive_seq=163401 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=1992 freq=180001386 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29650 bytes_read=93257 bytes_retransmit=0 bytes_invalid=0 send_seq=4916 receive_seq=4916 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999638 adj=49999241 sd_pos=1700793 heater_bed: target=60 temp=60.1 pwm=0.149 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.09 cputime=689.484 memavail=693592 print_time=5168.487 buffer_time=2.296 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5166.7: gcodein=0  mcu: mcu_awake=0.018 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7803114 bytes_read=2505786 bytes_retransmit=0 bytes_invalid=0 send_seq=163544 receive_seq=163543 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=3706 freq=180001417 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29662 bytes_read=93289 bytes_retransmit=0 bytes_invalid=0 send_seq=4918 receive_seq=4918 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999167 sd_pos=1703508 heater_bed: target=60 temp=60.1 pwm=0.148 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.08 cputime=690.671 memavail=693700 print_time=5170.430 buffer_time=2.547 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5167.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7808576 bytes_read=2506668 bytes_retransmit=0 bytes_invalid=0 send_seq=163636 receive_seq=163636 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=7773 freq=180001440 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29668 bytes_read=93305 bytes_retransmit=0 bytes_invalid=0 send_seq=4919 receive_seq=4919 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999176 sd_pos=1705734 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.08 cputime=691.121 memavail=693296 print_time=5171.488 buffer_time=2.606 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
Stats 5168.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7812924 bytes_read=2507508 bytes_retransmit=0 bytes_invalid=0 send_seq=163713 receive_seq=163713 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=6301 freq=180001432 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=29674 bytes_read=93334 bytes_retransmit=0 bytes_invalid=0 send_seq=4920 receive_seq=4920 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999130 sd_pos=1706122 heater_bed: target=60 temp=60.2 pwm=0.089 raspberry_pi: temp=43.5 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.08 cputime=691.245 memavail=693452 print_time=5172.207 buffer_time=2.324 print_stall=0 extruder: target=220 temp=220.0 pwm=0.590
Stats 5169.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7821558 bytes_read=2508653 bytes_retransmit=0 bytes_invalid=0 send_seq=163859 receive_seq=163859 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=950 freq=180001435 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=29680 bytes_read=93350 bytes_retransmit=0 bytes_invalid=0 send_seq=4921 receive_seq=4921 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999131 sd_pos=1706606 heater_bed: target=60 temp=60.2 pwm=0.089 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.08 cputime=691.420 memavail=693452 print_time=5173.206 buffer_time=2.322 print_stall=0 extruder: target=220 temp=220.2 pwm=0.538
Stats 5170.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7825990 bytes_read=2509439 bytes_retransmit=0 bytes_invalid=0 send_seq=163936 receive_seq=163936 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=0 freq=180001433 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=29686 bytes_read=93366 bytes_retransmit=0 bytes_invalid=0 send_seq=4922 receive_seq=4922 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999170 sd_pos=1707165 heater_bed: target=60 temp=60.1 pwm=0.170 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.15 cputime=691.610 memavail=693348 print_time=5174.487 buffer_time=2.598 print_stall=0 extruder: target=220 temp=220.3 pwm=0.538
Stats 5171.7: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7828018 bytes_read=2510119 bytes_retransmit=0 bytes_invalid=0 send_seq=163981 receive_seq=163981 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001435 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=29692 bytes_read=93382 bytes_retransmit=0 bytes_invalid=0 send_seq=4923 receive_seq=4923 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999236 sd_pos=1707471 heater_bed: target=60 temp=60.1 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.6 sysload=1.15 cputime=691.705 memavail=693348 print_time=5175.157 buffer_time=2.268 print_stall=0 extruder: target=220 temp=220.3 pwm=0.538
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5172.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7831682 bytes_read=2510920 bytes_retransmit=0 bytes_invalid=0 send_seq=164053 receive_seq=164053 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001424 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=29698 bytes_read=93398 bytes_retransmit=0 bytes_invalid=0 send_seq=4924 receive_seq=4924 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999293 sd_pos=1708130 heater_bed: target=60 temp=60.1 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.15 cputime=692.161 memavail=693348 print_time=5176.037 buffer_time=2.147 print_stall=0 extruder: target=220 temp=220.3 pwm=0.538
Stats 5173.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7835057 bytes_read=2511656 bytes_retransmit=0 bytes_invalid=0 send_seq=164120 receive_seq=164120 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001447 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29704 bytes_read=93427 bytes_retransmit=0 bytes_invalid=0 send_seq=4925 receive_seq=4925 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999300 sd_pos=1708616 heater_bed: target=60 temp=60.0 pwm=0.245 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.6 sysload=1.15 cputime=692.336 memavail=693088 print_time=5177.286 buffer_time=2.396 print_stall=0 extruder: target=220 temp=220.2 pwm=0.570
Stats 5174.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7838726 bytes_read=2512481 bytes_retransmit=0 bytes_invalid=0 send_seq=164194 receive_seq=164194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001443 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29710 bytes_read=93443 bytes_retransmit=0 bytes_invalid=0 send_seq=4926 receive_seq=4926 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999239 sd_pos=1709074 heater_bed: target=60 temp=60.1 pwm=0.131 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=1.15 cputime=692.516 memavail=693212 print_time=5178.505 buffer_time=2.614 print_stall=0 extruder: target=220 temp=220.1 pwm=0.570
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5175.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7844511 bytes_read=2513446 bytes_retransmit=0 bytes_invalid=0 send_seq=164302 receive_seq=164302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1235 freq=180001459 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29716 bytes_read=93459 bytes_retransmit=0 bytes_invalid=0 send_seq=4927 receive_seq=4927 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999299 sd_pos=1710591 heater_bed: target=60 temp=60.1 pwm=0.172 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=1.22 cputime=693.020 memavail=693212 print_time=5179.854 buffer_time=2.961 print_stall=0 extruder: target=220 temp=219.8 pwm=0.626
Stats 5176.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7846937 bytes_read=2514038 bytes_retransmit=0 bytes_invalid=0 send_seq=164354 receive_seq=164342 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=640 stalled_bytes=394 freq=180001502 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29722 bytes_read=93475 bytes_retransmit=0 bytes_invalid=0 send_seq=4928 receive_seq=4928 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999247 sd_pos=1711507 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.22 cputime=693.166 memavail=693212 print_time=5180.192 buffer_time=2.288 print_stall=0 extruder: target=220 temp=219.7 pwm=0.626
Stats 5177.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7849476 bytes_read=2514845 bytes_retransmit=0 bytes_invalid=0 send_seq=164409 receive_seq=164409 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=4660 freq=180001500 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=29728 bytes_read=93491 bytes_retransmit=0 bytes_invalid=0 send_seq=4929 receive_seq=4929 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999196 sd_pos=1714416 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.22 cputime=693.377 memavail=693500 print_time=5181.345 buffer_time=2.386 print_stall=0 extruder: target=220 temp=219.6 pwm=0.626
Stats 5178.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7856612 bytes_read=2515866 bytes_retransmit=0 bytes_invalid=0 send_seq=164534 receive_seq=164533 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=1761 freq=180001488 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=29734 bytes_read=93520 bytes_retransmit=0 bytes_invalid=0 send_seq=4930 receive_seq=4930 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999211 sd_pos=1716308 heater_bed: target=60 temp=60.0 pwm=0.200 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.22 cputime=693.546 memavail=693476 print_time=5182.012 buffer_time=2.053 print_stall=0 extruder: target=220 temp=219.5 pwm=0.626
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5179.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7862078 bytes_read=2516801 bytes_retransmit=0 bytes_invalid=0 send_seq=164630 receive_seq=164630 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=2844 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=29740 bytes_read=93536 bytes_retransmit=0 bytes_invalid=0 send_seq=4931 receive_seq=4931 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999251 sd_pos=1719100 heater_bed: target=60 temp=60.0 pwm=0.170 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.22 cputime=693.943 memavail=693476 print_time=5183.099 buffer_time=2.139 print_stall=0 extruder: target=220 temp=219.6 pwm=0.626
Stats 5180.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7868501 bytes_read=2517781 bytes_retransmit=0 bytes_invalid=0 send_seq=164741 receive_seq=164740 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3503 freq=180001476 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=29746 bytes_read=93552 bytes_retransmit=0 bytes_invalid=0 send_seq=4932 receive_seq=4932 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999202 sd_pos=1722348 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.20 cputime=694.233 memavail=693476 print_time=5184.303 buffer_time=2.276 print_stall=0 extruder: target=220 temp=219.7 pwm=0.632
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5181.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000017 bytes_write=7874613 bytes_read=2518717 bytes_retransmit=0 bytes_invalid=0 send_seq=164845 receive_seq=164844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=2220 freq=180001481 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=29752 bytes_read=93568 bytes_retransmit=0 bytes_invalid=0 send_seq=4933 receive_seq=4933 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999216 sd_pos=1724320 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.5 sysload=1.20 cputime=694.524 memavail=693476 print_time=5185.041 buffer_time=2.013 print_stall=0 extruder: target=220 temp=219.8 pwm=0.582
Stats 5182.8: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7880147 bytes_read=2519677 bytes_retransmit=0 bytes_invalid=0 send_seq=164943 receive_seq=164942 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=3091 freq=180001470 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000021 bytes_write=29758 bytes_read=93584 bytes_retransmit=0 bytes_invalid=0 send_seq=4934 receive_seq=4934 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999167 sd_pos=1727407 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.20 cputime=694.763 memavail=693476 print_time=5186.244 buffer_time=2.214 print_stall=0 extruder: target=220 temp=220.0 pwm=0.582
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5183.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7886959 bytes_read=2520658 bytes_retransmit=0 bytes_invalid=0 send_seq=165059 receive_seq=165058 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=43 stalled_bytes=3188 freq=180001463 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29764 bytes_read=93613 bytes_retransmit=0 bytes_invalid=0 send_seq=4935 receive_seq=4935 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999220 sd_pos=1730251 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=1.20 cputime=695.200 memavail=693488 print_time=5187.353 buffer_time=2.239 print_stall=0 extruder: target=220 temp=220.2 pwm=0.514
Stats 5184.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7892422 bytes_read=2521603 bytes_retransmit=0 bytes_invalid=0 send_seq=165157 receive_seq=165156 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=1930 freq=180001450 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29770 bytes_read=93629 bytes_retransmit=0 bytes_invalid=0 send_seq=4936 receive_seq=4936 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999248 sd_pos=1732101 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.20 cputime=695.371 memavail=693488 print_time=5188.235 buffer_time=2.120 print_stall=0 extruder: target=220 temp=220.2 pwm=0.514
Stats 5185.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7898109 bytes_read=2522508 bytes_retransmit=0 bytes_invalid=0 send_seq=165254 receive_seq=165254 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=805 freq=180001458 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29776 bytes_read=93645 bytes_retransmit=0 bytes_invalid=0 send_seq=4937 receive_seq=4937 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999268 sd_pos=1734417 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.27 cputime=695.606 memavail=693444 print_time=5189.218 buffer_time=2.104 print_stall=0 extruder: target=220 temp=220.3 pwm=0.514
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5186.9: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7903257 bytes_read=2523344 bytes_retransmit=0 bytes_invalid=0 send_seq=165341 receive_seq=165341 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=1074 freq=180001461 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29782 bytes_read=93661 bytes_retransmit=0 bytes_invalid=0 send_seq=4938 receive_seq=4938 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999230 sd_pos=1736641 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=1.27 cputime=695.880 memavail=693500 print_time=5190.227 buffer_time=2.111 print_stall=0 extruder: target=220 temp=220.2 pwm=0.565
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5187.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7907656 bytes_read=2524210 bytes_retransmit=0 bytes_invalid=0 send_seq=165420 receive_seq=165420 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001453 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=29788 bytes_read=93677 bytes_retransmit=0 bytes_invalid=0 send_seq=4939 receive_seq=4939 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999201 sd_pos=1737067 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.27 cputime=696.085 memavail=693700 print_time=5191.158 buffer_time=2.042 print_stall=0 extruder: target=220 temp=220.1 pwm=0.565
Stats 5188.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7910351 bytes_read=2524885 bytes_retransmit=0 bytes_invalid=0 send_seq=165472 receive_seq=165472 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001439 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29794 bytes_read=93706 bytes_retransmit=0 bytes_invalid=0 send_seq=4940 receive_seq=4940 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999209 sd_pos=1737379 heater_bed: target=60 temp=60.1 pwm=0.051 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.27 cputime=696.232 memavail=693500 print_time=5192.271 buffer_time=2.154 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
Stats 5189.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7914014 bytes_read=2525646 bytes_retransmit=0 bytes_invalid=0 send_seq=165544 receive_seq=165544 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001428 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29800 bytes_read=93722 bytes_retransmit=0 bytes_invalid=0 send_seq=4941 receive_seq=4941 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999255 sd_pos=1738136 heater_bed: target=60 temp=60.1 pwm=0.139 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=1.27 cputime=696.375 memavail=693500 print_time=5193.597 buffer_time=2.480 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5190.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7916253 bytes_read=2526341 bytes_retransmit=0 bytes_invalid=0 send_seq=165592 receive_seq=165592 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001501 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29806 bytes_read=93738 bytes_retransmit=0 bytes_invalid=0 send_seq=4942 receive_seq=4942 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999269 sd_pos=1738390 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.25 cputime=696.662 memavail=693500 print_time=5194.321 buffer_time=2.204 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
Stats 5191.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000013 mcu_task_stddev=0.000013 bytes_write=7919379 bytes_read=2527076 bytes_retransmit=0 bytes_invalid=0 send_seq=165654 receive_seq=165654 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=34 stalled_bytes=0 freq=180001506 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29812 bytes_read=93754 bytes_retransmit=0 bytes_invalid=0 send_seq=4943 receive_seq=4943 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999031 sd_pos=1738827 heater_bed: target=60 temp=60.1 pwm=0.116 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.25 cputime=696.819 memavail=693396 print_time=5195.580 buffer_time=2.462 print_stall=0 extruder: target=220 temp=219.8 pwm=0.579
Stats 5192.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7921206 bytes_read=2527713 bytes_retransmit=0 bytes_invalid=0 send_seq=165696 receive_seq=165696 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001499 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=29818 bytes_read=93770 bytes_retransmit=0 bytes_invalid=0 send_seq=4944 receive_seq=4944 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999119 sd_pos=1739117 heater_bed: target=60 temp=60.1 pwm=0.085 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.25 cputime=696.965 memavail=693512 print_time=5196.129 buffer_time=2.011 print_stall=0 extruder: target=220 temp=219.9 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5194.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7924920 bytes_read=2528482 bytes_retransmit=0 bytes_invalid=0 send_seq=165770 receive_seq=165758 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=1731 stalled_bytes=0 freq=180001482 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29824 bytes_read=93799 bytes_retransmit=0 bytes_invalid=0 send_seq=4945 receive_seq=4945 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999152 sd_pos=1739943 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.25 cputime=697.504 memavail=693512 print_time=5197.700 buffer_time=2.490 print_stall=0 extruder: target=220 temp=220.1 pwm=0.579
Stats 5195.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7928991 bytes_read=2529353 bytes_retransmit=0 bytes_invalid=0 send_seq=165850 receive_seq=165850 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29830 bytes_read=93815 bytes_retransmit=0 bytes_invalid=0 send_seq=4946 receive_seq=4946 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999210 sd_pos=1740246 heater_bed: target=60 temp=60.1 pwm=0.107 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.25 cputime=697.615 memavail=693708 print_time=5198.389 buffer_time=2.178 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5196.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7933207 bytes_read=2530208 bytes_retransmit=0 bytes_invalid=0 send_seq=165930 receive_seq=165930 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=5223 freq=180001479 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29836 bytes_read=93831 bytes_retransmit=0 bytes_invalid=0 send_seq=4947 receive_seq=4947 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999238 sd_pos=1742131 heater_bed: target=60 temp=60.0 pwm=0.107 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.31 cputime=698.203 memavail=693776 print_time=5199.919 buffer_time=2.708 print_stall=0 extruder: target=220 temp=220.2 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5197.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=7938357 bytes_read=2531093 bytes_retransmit=0 bytes_invalid=0 send_seq=166024 receive_seq=166024 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=8428 freq=180001463 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29842 bytes_read=93847 bytes_retransmit=0 bytes_invalid=0 send_seq=4948 receive_seq=4948 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999207 sd_pos=1744060 heater_bed: target=60 temp=60.1 pwm=0.099 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=1.31 cputime=698.482 memavail=693776 print_time=5200.909 buffer_time=2.697 print_stall=0 extruder: target=220 temp=220.1 pwm=0.579
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5198.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7942635 bytes_read=2531920 bytes_retransmit=0 bytes_invalid=0 send_seq=166105 receive_seq=166104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=7082 freq=180001475 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29848 bytes_read=93863 bytes_retransmit=0 bytes_invalid=0 send_seq=4949 receive_seq=4949 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999271 sd_pos=1745068 heater_bed: target=60 temp=60.1 pwm=0.152 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.31 cputime=698.691 memavail=694168 print_time=5201.348 buffer_time=2.134 print_stall=0 extruder: target=220 temp=219.9 pwm=0.579
Stats 5199.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7952419 bytes_read=2533185 bytes_retransmit=0 bytes_invalid=0 send_seq=166269 receive_seq=166268 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3749 freq=180001464 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29854 bytes_read=93892 bytes_retransmit=0 bytes_invalid=0 send_seq=4950 receive_seq=4950 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999252 sd_pos=1747884 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.31 cputime=698.930 memavail=694292 print_time=5202.468 buffer_time=2.253 print_stall=0 extruder: target=220 temp=219.8 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5200.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7959348 bytes_read=2534196 bytes_retransmit=0 bytes_invalid=0 send_seq=166388 receive_seq=166388 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=3715 freq=180001450 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29860 bytes_read=93908 bytes_retransmit=0 bytes_invalid=0 send_seq=4951 receive_seq=4951 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999284 sd_pos=1750686 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.31 cputime=699.320 memavail=694292 print_time=5203.562 buffer_time=2.320 print_stall=0 extruder: target=220 temp=219.7 pwm=0.639
Stats 5201.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7964929 bytes_read=2535078 bytes_retransmit=0 bytes_invalid=0 send_seq=166484 receive_seq=166484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=3766 freq=180001446 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29866 bytes_read=93924 bytes_retransmit=0 bytes_invalid=0 send_seq=4952 receive_seq=4952 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999314 sd_pos=1753360 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.28 cputime=699.548 memavail=694236 print_time=5204.615 buffer_time=2.372 print_stall=0 extruder: target=220 temp=219.6 pwm=0.639
Stats 5202.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=7970970 bytes_read=2536048 bytes_retransmit=0 bytes_invalid=0 send_seq=166588 receive_seq=166588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=2285 freq=180001435 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29872 bytes_read=93940 bytes_retransmit=0 bytes_invalid=0 send_seq=4953 receive_seq=4953 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999352 sd_pos=1755227 heater_bed: target=60 temp=60.1 pwm=0.142 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.28 cputime=699.720 memavail=694292 print_time=5205.318 buffer_time=2.075 print_stall=0 extruder: target=220 temp=219.8 pwm=0.639
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5203.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7976642 bytes_read=2536960 bytes_retransmit=0 bytes_invalid=0 send_seq=166687 receive_seq=166687 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=2904 freq=180001420 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=29878 bytes_read=93956 bytes_retransmit=0 bytes_invalid=0 send_seq=4954 receive_seq=4954 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999346 sd_pos=1757946 heater_bed: target=60 temp=60.1 pwm=0.087 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.6 sysload=1.28 cputime=700.106 memavail=694292 print_time=5206.385 buffer_time=2.140 print_stall=0 extruder: target=220 temp=219.9 pwm=0.559
Stats 5204.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7982729 bytes_read=2537916 bytes_retransmit=0 bytes_invalid=0 send_seq=166793 receive_seq=166793 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=3306 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=29884 bytes_read=93985 bytes_retransmit=0 bytes_invalid=0 send_seq=4955 receive_seq=4955 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999363 sd_pos=1761022 heater_bed: target=60 temp=60.1 pwm=0.088 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.28 cputime=700.330 memavail=694188 print_time=5207.547 buffer_time=2.302 print_stall=0 extruder: target=220 temp=220.2 pwm=0.559
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5205.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7988613 bytes_read=2538875 bytes_retransmit=0 bytes_invalid=0 send_seq=166897 receive_seq=166896 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=2135 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=29890 bytes_read=94000 bytes_retransmit=0 bytes_invalid=0 send_seq=4956 receive_seq=4956 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999389 sd_pos=1762691 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=1.28 cputime=700.662 memavail=694304 print_time=5208.251 buffer_time=2.005 print_stall=0 extruder: target=220 temp=220.3 pwm=0.501
Stats 5206.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=7994197 bytes_read=2539771 bytes_retransmit=0 bytes_invalid=0 send_seq=166995 receive_seq=166995 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=1382 freq=180001393 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=29896 bytes_read=94015 bytes_retransmit=0 bytes_invalid=0 send_seq=4957 receive_seq=4957 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999384 sd_pos=1765041 heater_bed: target=60 temp=60.1 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.26 cputime=700.911 memavail=694304 print_time=5209.381 buffer_time=2.134 print_stall=0 extruder: target=220 temp=220.4 pwm=0.501
Stats 5207.0: gcodein=0  mcu: mcu_awake=0.020 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=8000309 bytes_read=2540722 bytes_retransmit=0 bytes_invalid=0 send_seq=167100 receive_seq=167100 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=416 freq=180001383 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=29902 bytes_read=94030 bytes_retransmit=0 bytes_invalid=0 send_seq=4958 receive_seq=4958 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999383 sd_pos=1767194 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=1.26 cputime=701.150 memavail=694200 print_time=5210.346 buffer_time=2.098 print_stall=0 extruder: target=220 temp=220.3 pwm=0.553
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5208.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=8004603 bytes_read=2541572 bytes_retransmit=0 bytes_invalid=0 send_seq=167178 receive_seq=167178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2569 freq=180001433 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=29908 bytes_read=94045 bytes_retransmit=0 bytes_invalid=0 send_seq=4959 receive_seq=4959 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999410 sd_pos=1768925 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=1.26 cputime=701.724 memavail=694040 print_time=5211.599 buffer_time=2.349 print_stall=0 extruder: target=220 temp=220.2 pwm=0.553
Stats 5209.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=8009717 bytes_read=2542408 bytes_retransmit=0 bytes_invalid=0 send_seq=167265 receive_seq=167265 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001426 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29914 bytes_read=94073 bytes_retransmit=0 bytes_invalid=0 send_seq=4960 receive_seq=4960 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999226 sd_pos=1769293 heater_bed: target=60 temp=60.1 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.26 cputime=701.879 memavail=694040 print_time=5212.598 buffer_time=2.348 print_stall=0 extruder: target=220 temp=220.0 pwm=0.616
Stats 5210.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=8011511 bytes_read=2543044 bytes_retransmit=0 bytes_invalid=0 send_seq=167307 receive_seq=167307 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001422 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29920 bytes_read=94089 bytes_retransmit=0 bytes_invalid=0 send_seq=4961 receive_seq=4961 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999253 sd_pos=1769520 heater_bed: target=60 temp=60.1 pwm=0.086 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=1.26 cputime=702.024 memavail=693616 print_time=5213.257 buffer_time=2.006 print_stall=0 extruder: target=220 temp=219.8 pwm=0.616
Stats 5211.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=8014849 bytes_read=2543818 bytes_retransmit=0 bytes_invalid=0 send_seq=167373 receive_seq=167373 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001413 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29926 bytes_read=94105 bytes_retransmit=0 bytes_invalid=0 send_seq=4962 receive_seq=4962 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999464 sd_pos=1770155 heater_bed: target=60 temp=60.1 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=1.24 cputime=702.206 memavail=693816 print_time=5214.549 buffer_time=2.298 print_stall=0 extruder: target=220 temp=219.8 pwm=0.616
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5212.0: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000016 bytes_write=8017095 bytes_read=2544484 bytes_retransmit=0 bytes_invalid=0 send_seq=167424 receive_seq=167424 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001417 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29932 bytes_read=94121 bytes_retransmit=0 bytes_invalid=0 send_seq=4963 receive_seq=4963 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999427 sd_pos=1770411 heater_bed: target=60 temp=60.1 pwm=0.121 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.24 cputime=702.486 memavail=693816 print_time=5215.276 buffer_time=2.025 print_stall=0 extruder: target=220 temp=219.9 pwm=0.616
Stats 5213.0: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8020362 bytes_read=2545256 bytes_retransmit=0 bytes_invalid=0 send_seq=167490 receive_seq=167490 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001442 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=29938 bytes_read=94137 bytes_retransmit=0 bytes_invalid=0 send_seq=4964 receive_seq=4964 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999373 sd_pos=1770767 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.24 cputime=702.651 memavail=693712 print_time=5216.538 buffer_time=2.286 print_stall=0 extruder: target=220 temp=220.0 pwm=0.588
Stats 5214.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8023288 bytes_read=2545995 bytes_retransmit=0 bytes_invalid=0 send_seq=167549 receive_seq=167549 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=180001439 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29944 bytes_read=94166 bytes_retransmit=0 bytes_invalid=0 send_seq=4965 receive_seq=4965 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999248 sd_pos=1771192 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.24 cputime=702.790 memavail=693816 print_time=5217.725 buffer_time=2.469 print_stall=0 extruder: target=220 temp=220.2 pwm=0.531
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5215.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8028548 bytes_read=2546901 bytes_retransmit=0 bytes_invalid=0 send_seq=167648 receive_seq=167648 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001439 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29950 bytes_read=94182 bytes_retransmit=0 bytes_invalid=0 send_seq=4966 receive_seq=4966 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999232 sd_pos=1772075 heater_bed: target=60 temp=60.0 pwm=0.219 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.24 cputime=703.388 memavail=693816 print_time=5218.733 buffer_time=2.478 print_stall=0 extruder: target=220 temp=220.2 pwm=0.531
Stats 5216.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8030735 bytes_read=2547572 bytes_retransmit=0 bytes_invalid=0 send_seq=167697 receive_seq=167697 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001420 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29956 bytes_read=94198 bytes_retransmit=0 bytes_invalid=0 send_seq=4967 receive_seq=4967 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999198 sd_pos=1772348 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=1.14 cputime=703.481 memavail=693712 print_time=5219.412 buffer_time=2.155 print_stall=0 extruder: target=220 temp=220.3 pwm=0.531
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5217.1: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8034093 bytes_read=2548346 bytes_retransmit=0 bytes_invalid=0 send_seq=167763 receive_seq=167763 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=5299 freq=180001407 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29962 bytes_read=94214 bytes_retransmit=0 bytes_invalid=0 send_seq=4968 receive_seq=4968 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999264 sd_pos=1774169 heater_bed: target=60 temp=60.0 pwm=0.128 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.14 cputime=704.043 memavail=693828 print_time=5220.876 buffer_time=2.618 print_stall=0 extruder: target=220 temp=220.1 pwm=0.591
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5218.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8039911 bytes_read=2549268 bytes_retransmit=0 bytes_invalid=0 send_seq=167862 receive_seq=167862 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=5061 freq=180001403 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=29968 bytes_read=94230 bytes_retransmit=0 bytes_invalid=0 send_seq=4969 receive_seq=4969 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999306 sd_pos=1775887 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.14 cputime=704.350 memavail=692988 print_time=5221.670 buffer_time=2.412 print_stall=0 extruder: target=220 temp=219.9 pwm=0.649
Stats 5219.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8044263 bytes_read=2550098 bytes_retransmit=0 bytes_invalid=0 send_seq=167942 receive_seq=167942 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=4580 freq=180001391 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29974 bytes_read=94259 bytes_retransmit=0 bytes_invalid=0 send_seq=4970 receive_seq=4970 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999311 sd_pos=1777633 heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=1.14 cputime=704.517 memavail=693076 print_time=5222.367 buffer_time=2.109 print_stall=0 extruder: target=220 temp=219.7 pwm=0.649
Stats 5220.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8052601 bytes_read=2551233 bytes_retransmit=0 bytes_invalid=0 send_seq=168083 receive_seq=168083 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=1796 freq=180001406 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29980 bytes_read=94275 bytes_retransmit=0 bytes_invalid=0 send_seq=4971 receive_seq=4971 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999305 sd_pos=1780116 heater_bed: target=60 temp=60.0 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.14 cputime=704.753 memavail=693084 print_time=5223.287 buffer_time=2.028 print_stall=0 extruder: target=220 temp=219.6 pwm=0.649
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5221.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8058126 bytes_read=2552124 bytes_retransmit=0 bytes_invalid=0 send_seq=168179 receive_seq=168179 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=2706 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29986 bytes_read=94291 bytes_retransmit=0 bytes_invalid=0 send_seq=4972 receive_seq=4972 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999227 sd_pos=1783137 heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.13 cputime=705.106 memavail=693084 print_time=5224.431 buffer_time=2.172 print_stall=0 extruder: target=220 temp=219.6 pwm=0.651
Stats 5222.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8063701 bytes_read=2553029 bytes_retransmit=0 bytes_invalid=0 send_seq=168274 receive_seq=168274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=2740 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29992 bytes_read=94307 bytes_retransmit=0 bytes_invalid=0 send_seq=4973 receive_seq=4973 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999240 sd_pos=1785628 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.13 cputime=705.351 memavail=693268 print_time=5225.426 buffer_time=2.167 print_stall=0 extruder: target=220 temp=219.7 pwm=0.651
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5223.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8069421 bytes_read=2553980 bytes_retransmit=0 bytes_invalid=0 send_seq=168375 receive_seq=168375 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=3286 freq=180001368 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=29998 bytes_read=94323 bytes_retransmit=0 bytes_invalid=0 send_seq=4974 receive_seq=4974 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999258 sd_pos=1788577 heater_bed: target=60 temp=60.0 pwm=0.113 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.13 cputime=705.687 memavail=693340 print_time=5226.574 buffer_time=2.315 print_stall=0 extruder: target=220 temp=219.9 pwm=0.586
Stats 5224.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8075402 bytes_read=2554892 bytes_retransmit=0 bytes_invalid=0 send_seq=168476 receive_seq=168476 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=2529 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30004 bytes_read=94352 bytes_retransmit=0 bytes_invalid=0 send_seq=4975 receive_seq=4975 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999275 sd_pos=1791024 heater_bed: target=60 temp=59.9 pwm=0.185 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.4 sysload=1.13 cputime=705.948 memavail=693340 print_time=5227.430 buffer_time=2.170 print_stall=0 extruder: target=220 temp=220.2 pwm=0.534
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5225.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8080937 bytes_read=2555801 bytes_retransmit=0 bytes_invalid=0 send_seq=168572 receive_seq=168572 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=2551 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30010 bytes_read=94368 bytes_retransmit=0 bytes_invalid=0 send_seq=4976 receive_seq=4976 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999281 sd_pos=1793545 heater_bed: target=60 temp=59.9 pwm=0.188 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.13 cputime=706.359 memavail=693088 print_time=5228.487 buffer_time=2.206 print_stall=0 extruder: target=220 temp=220.3 pwm=0.534
Stats 5226.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8086888 bytes_read=2556745 bytes_retransmit=0 bytes_invalid=0 send_seq=168676 receive_seq=168676 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=744 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30016 bytes_read=94384 bytes_retransmit=0 bytes_invalid=0 send_seq=4977 receive_seq=4977 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999290 sd_pos=1795453 heater_bed: target=60 temp=59.9 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.5 sysload=1.04 cputime=706.535 memavail=693088 print_time=5229.365 buffer_time=2.083 print_stall=0 extruder: target=220 temp=220.5 pwm=0.534
Stats 5227.1: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8092040 bytes_read=2557586 bytes_retransmit=0 bytes_invalid=0 send_seq=168765 receive_seq=168764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=760 freq=180001380 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30022 bytes_read=94400 bytes_retransmit=0 bytes_invalid=0 send_seq=4978 receive_seq=4978 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999218 sd_pos=1797696 heater_bed: target=60 temp=59.9 pwm=0.204 raspberry_pi: temp=42.9 mcu_temp: temp=38.0 chamber: temp=29.4 sysload=1.04 cputime=706.794 memavail=693088 print_time=5230.449 buffer_time=2.167 print_stall=0 extruder: target=220 temp=220.3 pwm=0.534
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5228.3: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8098392 bytes_read=2558646 bytes_retransmit=0 bytes_invalid=0 send_seq=168877 receive_seq=168876 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=2683 freq=180001377 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30028 bytes_read=94416 bytes_retransmit=0 bytes_invalid=0 send_seq=4979 receive_seq=4979 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999248 sd_pos=1800218 heater_bed: target=60 temp=59.9 pwm=0.150 raspberry_pi: temp=43.5 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=1.04 cputime=707.581 memavail=693604 print_time=5232.184 buffer_time=2.640 print_stall=0 extruder: target=220 temp=220.3 pwm=0.576
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5229.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8103054 bytes_read=2559495 bytes_retransmit=0 bytes_invalid=0 send_seq=168957 receive_seq=168957 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=3274 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=30034 bytes_read=94445 bytes_retransmit=0 bytes_invalid=0 send_seq=4980 receive_seq=4980 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999287 sd_pos=1801214 heater_bed: target=60 temp=59.9 pwm=0.168 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.04 cputime=708.171 memavail=693604 print_time=5233.229 buffer_time=2.620 print_stall=0 extruder: target=220 temp=220.1 pwm=0.576
Stats 5230.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8108018 bytes_read=2560336 bytes_retransmit=0 bytes_invalid=0 send_seq=169045 receive_seq=169045 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=30040 bytes_read=94461 bytes_retransmit=0 bytes_invalid=0 send_seq=4981 receive_seq=4981 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999297 sd_pos=1801463 heater_bed: target=60 temp=59.8 pwm=0.168 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.04 cputime=708.306 memavail=693604 print_time=5233.849 buffer_time=2.239 print_stall=0 extruder: target=220 temp=220.0 pwm=0.576
Stats 5231.4: gcodein=0  mcu: mcu_awake=0.017 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8110333 bytes_read=2561036 bytes_retransmit=0 bytes_invalid=0 send_seq=169094 receive_seq=169094 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=30046 bytes_read=94477 bytes_retransmit=0 bytes_invalid=0 send_seq=4982 receive_seq=4982 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999286 sd_pos=1801635 heater_bed: target=60 temp=59.9 pwm=0.168 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.03 cputime=708.469 memavail=693364 print_time=5234.670 buffer_time=2.059 print_stall=0 extruder: target=220 temp=219.9 pwm=0.576
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5232.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8112351 bytes_read=2561713 bytes_retransmit=0 bytes_invalid=0 send_seq=169141 receive_seq=169141 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001368 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=30052 bytes_read=94493 bytes_retransmit=0 bytes_invalid=0 send_seq=4983 receive_seq=4983 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999291 sd_pos=1802213 heater_bed: target=60 temp=59.8 pwm=0.216 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.03 cputime=708.775 memavail=693364 print_time=5235.564 buffer_time=1.846 print_stall=0 extruder: target=220 temp=220.0 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5233.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8119063 bytes_read=2562758 bytes_retransmit=0 bytes_invalid=0 send_seq=169261 receive_seq=169261 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001399 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000014 bytes_write=30058 bytes_read=94509 bytes_retransmit=0 bytes_invalid=0 send_seq=4984 receive_seq=4984 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999299 sd_pos=1803134 heater_bed: target=60 temp=59.8 pwm=0.216 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.4 sysload=1.03 cputime=709.202 memavail=693364 print_time=5236.953 buffer_time=2.234 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 5234.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8122318 bytes_read=2563509 bytes_retransmit=0 bytes_invalid=0 send_seq=169326 receive_seq=169326 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001398 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30064 bytes_read=94538 bytes_retransmit=0 bytes_invalid=0 send_seq=4985 receive_seq=4985 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999192 sd_pos=1803490 heater_bed: target=60 temp=59.9 pwm=0.101 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.6 sysload=1.03 cputime=709.366 memavail=693368 print_time=5238.214 buffer_time=2.494 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 5235.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8125272 bytes_read=2564180 bytes_retransmit=0 bytes_invalid=0 send_seq=169385 receive_seq=169377 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001390 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30070 bytes_read=94554 bytes_retransmit=0 bytes_invalid=0 send_seq=4986 receive_seq=4986 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999204 sd_pos=1803886 heater_bed: target=60 temp=59.9 pwm=0.101 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.5 sysload=1.03 cputime=709.542 memavail=693368 print_time=5239.412 buffer_time=2.677 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 5236.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8127228 bytes_read=2564905 bytes_retransmit=0 bytes_invalid=0 send_seq=169431 receive_seq=169431 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001380 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30076 bytes_read=94570 bytes_retransmit=0 bytes_invalid=0 send_seq=4987 receive_seq=4987 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999263 sd_pos=1804193 heater_bed: target=60 temp=59.9 pwm=0.117 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.4 sysload=0.95 cputime=709.649 memavail=693368 print_time=5240.064 buffer_time=2.328 print_stall=0 extruder: target=220 temp=220.0 pwm=0.583
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5237.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8132576 bytes_read=2565822 bytes_retransmit=0 bytes_invalid=0 send_seq=169531 receive_seq=169531 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001371 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30082 bytes_read=94586 bytes_retransmit=0 bytes_invalid=0 send_seq=4988 receive_seq=4988 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999286 sd_pos=1805195 heater_bed: target=60 temp=59.9 pwm=0.177 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.95 cputime=710.183 memavail=693128 print_time=5241.352 buffer_time=2.615 print_stall=0 extruder: target=220 temp=219.9 pwm=0.583
Stats 5238.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8135834 bytes_read=2566579 bytes_retransmit=0 bytes_invalid=0 send_seq=169597 receive_seq=169597 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=261 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30088 bytes_read=94602 bytes_retransmit=0 bytes_invalid=0 send_seq=4989 receive_seq=4989 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999348 sd_pos=1806766 heater_bed: target=60 temp=59.9 pwm=0.179 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=29.6 sysload=0.95 cputime=710.357 memavail=693128 print_time=5241.986 buffer_time=2.248 print_stall=0 extruder: target=220 temp=220.1 pwm=0.583
Stats 5239.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8138760 bytes_read=2567329 bytes_retransmit=0 bytes_invalid=0 send_seq=169657 receive_seq=169656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=2652 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=30094 bytes_read=94631 bytes_retransmit=0 bytes_invalid=0 send_seq=4990 receive_seq=4990 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999373 sd_pos=1809309 heater_bed: target=60 temp=59.9 pwm=0.127 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.95 cputime=710.616 memavail=693128 print_time=5242.951 buffer_time=2.213 print_stall=0 extruder: target=220 temp=220.0 pwm=0.583
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5240.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8144160 bytes_read=2568205 bytes_retransmit=0 bytes_invalid=0 send_seq=169751 receive_seq=169751 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=44 stalled_bytes=2504 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=30100 bytes_read=94647 bytes_retransmit=0 bytes_invalid=0 send_seq=4991 receive_seq=4991 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999387 sd_pos=1812117 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.95 cputime=710.955 memavail=693128 print_time=5243.978 buffer_time=2.239 print_stall=0 extruder: target=220 temp=220.0 pwm=0.589
Stats 5241.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=8150031 bytes_read=2569121 bytes_retransmit=0 bytes_invalid=0 send_seq=169851 receive_seq=169851 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=2454 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=30106 bytes_read=94663 bytes_retransmit=0 bytes_invalid=0 send_seq=4992 receive_seq=4992 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999404 sd_pos=1814557 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.87 cputime=711.174 memavail=693128 print_time=5245.023 buffer_time=2.283 print_stall=0 extruder: target=220 temp=219.9 pwm=0.589
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5242.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=8155223 bytes_read=2570057 bytes_retransmit=0 bytes_invalid=0 send_seq=169944 receive_seq=169944 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=2413 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=30112 bytes_read=94679 bytes_retransmit=0 bytes_invalid=0 send_seq=4993 receive_seq=4993 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999384 sd_pos=1817232 heater_bed: target=60 temp=60.0 pwm=0.137 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=0.87 cputime=711.562 memavail=693128 print_time=5246.003 buffer_time=2.263 print_stall=0 extruder: target=220 temp=219.8 pwm=0.589
Stats 5243.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=8160918 bytes_read=2570953 bytes_retransmit=0 bytes_invalid=0 send_seq=170043 receive_seq=170043 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=2282 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=30118 bytes_read=94695 bytes_retransmit=0 bytes_invalid=0 send_seq=4994 receive_seq=4994 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999407 sd_pos=1819666 heater_bed: target=60 temp=60.0 pwm=0.073 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.87 cputime=711.763 memavail=693260 print_time=5246.926 buffer_time=2.185 print_stall=0 extruder: target=220 temp=219.8 pwm=0.589
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5244.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=8166156 bytes_read=2571849 bytes_retransmit=0 bytes_invalid=0 send_seq=170134 receive_seq=170134 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=2260 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30124 bytes_read=94724 bytes_retransmit=0 bytes_invalid=0 send_seq=4995 receive_seq=4995 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999375 sd_pos=1822191 heater_bed: target=60 temp=60.0 pwm=0.127 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.87 cputime=712.135 memavail=693260 print_time=5247.946 buffer_time=2.186 print_stall=0 extruder: target=220 temp=219.9 pwm=0.594
Stats 5245.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=8171853 bytes_read=2572769 bytes_retransmit=0 bytes_invalid=0 send_seq=170232 receive_seq=170232 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=124 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30130 bytes_read=94740 bytes_retransmit=0 bytes_invalid=0 send_seq=4996 receive_seq=4996 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999326 sd_pos=1823739 heater_bed: target=60 temp=60.1 pwm=0.063 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.87 cputime=712.303 memavail=693260 print_time=5248.760 buffer_time=1.999 print_stall=0 extruder: target=220 temp=219.8 pwm=0.594
Stats 5246.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000013 mcu_task_stddev=0.000017 bytes_write=8176964 bytes_read=2573620 bytes_retransmit=0 bytes_invalid=0 send_seq=170322 receive_seq=170322 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=457 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30136 bytes_read=94756 bytes_retransmit=0 bytes_invalid=0 send_seq=4997 receive_seq=4997 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999258 sd_pos=1826119 heater_bed: target=60 temp=60.0 pwm=0.168 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.80 cputime=712.570 memavail=693272 print_time=5249.881 buffer_time=2.119 print_stall=0 extruder: target=220 temp=219.9 pwm=0.594
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5247.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8181643 bytes_read=2574506 bytes_retransmit=0 bytes_invalid=0 send_seq=170408 receive_seq=170408 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=1250 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30142 bytes_read=94772 bytes_retransmit=0 bytes_invalid=0 send_seq=4998 receive_seq=4998 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999329 sd_pos=1827973 heater_bed: target=60 temp=60.0 pwm=0.112 raspberry_pi: temp=43.5 mcu_temp: temp=38.4 chamber: temp=29.3 sysload=0.80 cputime=713.037 memavail=693120 print_time=5251.339 buffer_time=2.577 print_stall=0 extruder: target=220 temp=220.0 pwm=0.594
Stats 5248.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8185275 bytes_read=2575252 bytes_retransmit=0 bytes_invalid=0 send_seq=170474 receive_seq=170474 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=19 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30148 bytes_read=94788 bytes_retransmit=0 bytes_invalid=0 send_seq=4999 receive_seq=4999 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999323 sd_pos=1828486 heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=0.80 cputime=713.154 memavail=693256 print_time=5251.995 buffer_time=2.231 print_stall=0 extruder: target=220 temp=220.0 pwm=0.572
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5249.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8191456 bytes_read=2576228 bytes_retransmit=0 bytes_invalid=0 send_seq=170588 receive_seq=170588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1110 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30160 bytes_read=94833 bytes_retransmit=0 bytes_invalid=0 send_seq=5001 receive_seq=5001 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999296 sd_pos=1829713 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.2 sysload=0.80 cputime=713.903 memavail=693264 print_time=5253.216 buffer_time=2.452 print_stall=0 extruder: target=220 temp=220.1 pwm=0.572
Stats 5250.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8194068 bytes_read=2576939 bytes_retransmit=0 bytes_invalid=0 send_seq=170642 receive_seq=170642 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30166 bytes_read=94849 bytes_retransmit=0 bytes_invalid=0 send_seq=5002 receive_seq=5002 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999347 sd_pos=1829993 heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.80 cputime=714.012 memavail=693264 print_time=5253.841 buffer_time=2.076 print_stall=0 extruder: target=220 temp=220.2 pwm=0.572
Stats 5251.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8196971 bytes_read=2577670 bytes_retransmit=0 bytes_invalid=0 send_seq=170700 receive_seq=170700 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30172 bytes_read=94865 bytes_retransmit=0 bytes_invalid=0 send_seq=5003 receive_seq=5003 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999335 sd_pos=1830302 heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=0.74 cputime=714.194 memavail=693264 print_time=5255.060 buffer_time=2.295 print_stall=0 extruder: target=220 temp=220.3 pwm=0.572
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5252.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8200235 bytes_read=2578391 bytes_retransmit=0 bytes_invalid=0 send_seq=170764 receive_seq=170764 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30178 bytes_read=94881 bytes_retransmit=0 bytes_invalid=0 send_seq=5004 receive_seq=5004 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999313 sd_pos=1830781 heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.74 cputime=714.499 memavail=693284 print_time=5256.314 buffer_time=2.547 print_stall=0 extruder: target=220 temp=220.3 pwm=0.572
Stats 5253.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8202427 bytes_read=2579093 bytes_retransmit=0 bytes_invalid=0 send_seq=170813 receive_seq=170813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30184 bytes_read=94897 bytes_retransmit=0 bytes_invalid=0 send_seq=5005 receive_seq=5005 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999284 sd_pos=1830949 heater_bed: target=60 temp=60.0 pwm=0.136 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=0.74 cputime=714.639 memavail=693284 print_time=5257.138 buffer_time=2.370 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
Stats 5254.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8204433 bytes_read=2579759 bytes_retransmit=0 bytes_invalid=0 send_seq=170858 receive_seq=170858 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30190 bytes_read=94926 bytes_retransmit=0 bytes_invalid=0 send_seq=5006 receive_seq=5006 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999309 sd_pos=1831394 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=0.74 cputime=714.801 memavail=693284 print_time=5258.092 buffer_time=2.324 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
Stats 5255.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8206779 bytes_read=2580410 bytes_retransmit=0 bytes_invalid=0 send_seq=170908 receive_seq=170908 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30196 bytes_read=94942 bytes_retransmit=0 bytes_invalid=0 send_seq=5007 receive_seq=5007 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999328 sd_pos=1831536 heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.74 cputime=714.963 memavail=693512 print_time=5258.922 buffer_time=2.153 print_stall=0 extruder: target=220 temp=219.9 pwm=0.642
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5256.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8213183 bytes_read=2581446 bytes_retransmit=0 bytes_invalid=0 send_seq=171024 receive_seq=171024 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30202 bytes_read=94958 bytes_retransmit=0 bytes_invalid=0 send_seq=5008 receive_seq=5008 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999335 sd_pos=1833258 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.68 cputime=715.674 memavail=693548 print_time=5259.975 buffer_time=2.205 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5257.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8216257 bytes_read=2582177 bytes_retransmit=0 bytes_invalid=0 send_seq=171085 receive_seq=171085 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=1705 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30208 bytes_read=94974 bytes_retransmit=0 bytes_invalid=0 send_seq=5009 receive_seq=5009 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999287 sd_pos=1834837 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=0.68 cputime=715.893 memavail=693272 print_time=5260.910 buffer_time=2.139 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
Stats 5258.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8221048 bytes_read=2583039 bytes_retransmit=0 bytes_invalid=0 send_seq=171174 receive_seq=171174 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=2086 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30214 bytes_read=94990 bytes_retransmit=0 bytes_invalid=0 send_seq=5010 receive_seq=5010 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999325 sd_pos=1837329 heater_bed: target=60 temp=60.1 pwm=0.096 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.68 cputime=716.102 memavail=693300 print_time=5261.856 buffer_time=2.085 print_stall=0 extruder: target=220 temp=219.7 pwm=0.633
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5259.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8226617 bytes_read=2583970 bytes_retransmit=0 bytes_invalid=0 send_seq=171269 receive_seq=171269 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=1231 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30220 bytes_read=95019 bytes_retransmit=0 bytes_invalid=0 send_seq=5011 receive_seq=5011 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999327 sd_pos=1840142 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.68 cputime=716.489 memavail=693300 print_time=5262.825 buffer_time=2.054 print_stall=0 extruder: target=220 temp=219.6 pwm=0.633
Stats 5260.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8232191 bytes_read=2584870 bytes_retransmit=0 bytes_invalid=0 send_seq=171366 receive_seq=171366 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=1281 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30226 bytes_read=95035 bytes_retransmit=0 bytes_invalid=0 send_seq=5012 receive_seq=5012 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999286 sd_pos=1842569 heater_bed: target=60 temp=60.0 pwm=0.161 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=29.4 sysload=0.68 cputime=716.716 memavail=693300 print_time=5263.779 buffer_time=2.006 print_stall=0 extruder: target=220 temp=219.7 pwm=0.622
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5261.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8237035 bytes_read=2585701 bytes_retransmit=0 bytes_invalid=0 send_seq=171452 receive_seq=171452 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=2327 freq=180001337 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30232 bytes_read=95051 bytes_retransmit=0 bytes_invalid=0 send_seq=5013 receive_seq=5013 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999289 sd_pos=1845916 heater_bed: target=60 temp=60.0 pwm=0.170 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.62 cputime=717.103 memavail=693196 print_time=5265.024 buffer_time=2.251 print_stall=0 extruder: target=220 temp=219.8 pwm=0.622
Stats 5262.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8242772 bytes_read=2586673 bytes_retransmit=0 bytes_invalid=0 send_seq=171552 receive_seq=171552 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=1949 freq=180001333 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30238 bytes_read=95067 bytes_retransmit=0 bytes_invalid=0 send_seq=5014 receive_seq=5014 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999264 sd_pos=1848387 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.62 cputime=717.313 memavail=693308 print_time=5265.993 buffer_time=2.212 print_stall=0 extruder: target=220 temp=219.9 pwm=0.622
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5263.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8247423 bytes_read=2587493 bytes_retransmit=0 bytes_invalid=0 send_seq=171633 receive_seq=171633 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=1385 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30244 bytes_read=95083 bytes_retransmit=0 bytes_invalid=0 send_seq=5015 receive_seq=5015 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999276 sd_pos=1850704 heater_bed: target=60 temp=60.0 pwm=0.099 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.62 cputime=717.617 memavail=693308 print_time=5266.903 buffer_time=2.118 print_stall=0 extruder: target=220 temp=220.1 pwm=0.561
Stats 5264.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8253377 bytes_read=2588415 bytes_retransmit=0 bytes_invalid=0 send_seq=171735 receive_seq=171735 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=605 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30250 bytes_read=95112 bytes_retransmit=0 bytes_invalid=0 send_seq=5016 receive_seq=5016 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999194 sd_pos=1853058 heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.62 cputime=717.885 memavail=693312 print_time=5268.023 buffer_time=2.225 print_stall=0 extruder: target=220 temp=220.3 pwm=0.561
Stats 5265.6: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8257072 bytes_read=2589205 bytes_retransmit=0 bytes_invalid=0 send_seq=171804 receive_seq=171804 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30256 bytes_read=95128 bytes_retransmit=0 bytes_invalid=0 send_seq=5017 receive_seq=5017 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999199 sd_pos=1854566 heater_bed: target=60 temp=59.9 pwm=0.211 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.62 cputime=718.024 memavail=693312 print_time=5268.811 buffer_time=2.013 print_stall=0 extruder: target=220 temp=220.3 pwm=0.503
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5266.9: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8262935 bytes_read=2590223 bytes_retransmit=0 bytes_invalid=0 send_seq=171913 receive_seq=171913 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30262 bytes_read=95144 bytes_retransmit=0 bytes_invalid=0 send_seq=5018 receive_seq=5018 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999191 sd_pos=1856143 heater_bed: target=60 temp=59.9 pwm=0.209 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.2 sysload=0.66 cputime=718.626 memavail=693536 print_time=5270.370 buffer_time=2.305 print_stall=0 extruder: target=220 temp=220.3 pwm=0.561
Stats 5267.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8265482 bytes_read=2590911 bytes_retransmit=0 bytes_invalid=0 send_seq=171966 receive_seq=171965 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30268 bytes_read=95160 bytes_retransmit=0 bytes_invalid=0 send_seq=5019 receive_seq=5019 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999213 sd_pos=1856593 heater_bed: target=60 temp=59.9 pwm=0.209 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.66 cputime=718.751 memavail=693820 print_time=5271.324 buffer_time=2.258 print_stall=0 extruder: target=220 temp=220.2 pwm=0.561
Stats 5268.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8269264 bytes_read=2591721 bytes_retransmit=0 bytes_invalid=0 send_seq=172039 receive_seq=172038 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=27 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30274 bytes_read=95176 bytes_retransmit=0 bytes_invalid=0 send_seq=5020 receive_seq=5020 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999211 sd_pos=1857100 heater_bed: target=60 temp=59.9 pwm=0.182 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.66 cputime=718.948 memavail=693828 print_time=5272.607 buffer_time=2.541 print_stall=0 extruder: target=220 temp=220.1 pwm=0.561
Stats 5269.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8271283 bytes_read=2592372 bytes_retransmit=0 bytes_invalid=0 send_seq=172084 receive_seq=172083 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30280 bytes_read=95205 bytes_retransmit=0 bytes_invalid=0 send_seq=5021 receive_seq=5021 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999216 sd_pos=1857443 heater_bed: target=60 temp=59.8 pwm=0.232 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.66 cputime=719.105 memavail=693724 print_time=5273.247 buffer_time=2.180 print_stall=0 extruder: target=220 temp=219.9 pwm=0.618
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5270.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8277323 bytes_read=2593334 bytes_retransmit=0 bytes_invalid=0 send_seq=172193 receive_seq=172193 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=49 stalled_bytes=1106 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30286 bytes_read=95221 bytes_retransmit=0 bytes_invalid=0 send_seq=5022 receive_seq=5022 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999232 sd_pos=1858832 heater_bed: target=60 temp=59.9 pwm=0.095 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.76 cputime=719.785 memavail=693828 print_time=5274.427 buffer_time=2.359 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5271.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8280132 bytes_read=2594052 bytes_retransmit=0 bytes_invalid=0 send_seq=172249 receive_seq=172249 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=4661 freq=180001348 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30292 bytes_read=95237 bytes_retransmit=0 bytes_invalid=0 send_seq=5023 receive_seq=5023 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999241 sd_pos=1860009 heater_bed: target=60 temp=59.9 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=0.76 cputime=720.257 memavail=693828 print_time=5275.384 buffer_time=2.315 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
Stats 5272.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8285229 bytes_read=2594945 bytes_retransmit=0 bytes_invalid=0 send_seq=172342 receive_seq=172342 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1951 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30298 bytes_read=95253 bytes_retransmit=0 bytes_invalid=0 send_seq=5024 receive_seq=5024 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999232 sd_pos=1860335 heater_bed: target=60 temp=59.9 pwm=0.083 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=0.76 cputime=720.405 memavail=693724 print_time=5276.266 buffer_time=2.196 print_stall=0 extruder: target=220 temp=219.8 pwm=0.618
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5273.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8289951 bytes_read=2595756 bytes_retransmit=0 bytes_invalid=0 send_seq=172424 receive_seq=172424 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001331 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30304 bytes_read=95269 bytes_retransmit=0 bytes_invalid=0 send_seq=5025 receive_seq=5025 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999288 sd_pos=1860768 heater_bed: target=60 temp=59.9 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.76 cputime=720.679 memavail=693840 print_time=5277.264 buffer_time=2.193 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 5274.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8292810 bytes_read=2596512 bytes_retransmit=0 bytes_invalid=0 send_seq=172484 receive_seq=172484 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001336 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30310 bytes_read=95298 bytes_retransmit=0 bytes_invalid=0 send_seq=5026 receive_seq=5026 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999300 sd_pos=1861186 heater_bed: target=60 temp=59.9 pwm=0.243 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.76 cputime=720.850 memavail=693840 print_time=5278.170 buffer_time=2.099 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5275.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8297395 bytes_read=2597383 bytes_retransmit=0 bytes_invalid=0 send_seq=172573 receive_seq=172573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30316 bytes_read=95314 bytes_retransmit=0 bytes_invalid=0 send_seq=5027 receive_seq=5027 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999313 sd_pos=1862138 heater_bed: target=60 temp=59.9 pwm=0.185 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.78 cputime=721.151 memavail=694036 print_time=5279.389 buffer_time=2.317 print_stall=0 extruder: target=220 temp=220.0 pwm=0.601
Stats 5276.9: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8301825 bytes_read=2598209 bytes_retransmit=0 bytes_invalid=0 send_seq=172658 receive_seq=172658 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=285 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30322 bytes_read=95330 bytes_retransmit=0 bytes_invalid=0 send_seq=5028 receive_seq=5028 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999317 sd_pos=1864536 heater_bed: target=60 temp=59.9 pwm=0.134 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=0.78 cputime=721.354 memavail=694104 print_time=5280.288 buffer_time=2.216 print_stall=0 extruder: target=220 temp=220.1 pwm=0.541
Stats 5277.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8305274 bytes_read=2599016 bytes_retransmit=0 bytes_invalid=0 send_seq=172725 receive_seq=172725 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=1257 freq=180001344 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30328 bytes_read=95346 bytes_retransmit=0 bytes_invalid=0 send_seq=5029 receive_seq=5029 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999284 sd_pos=1867033 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.78 cputime=721.602 memavail=694012 print_time=5281.190 buffer_time=2.117 print_stall=0 extruder: target=220 temp=220.1 pwm=0.541
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5278.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8310227 bytes_read=2599871 bytes_retransmit=0 bytes_invalid=0 send_seq=172813 receive_seq=172813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=1395 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30334 bytes_read=95362 bytes_retransmit=0 bytes_invalid=0 send_seq=5030 receive_seq=5030 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999307 sd_pos=1869526 heater_bed: target=60 temp=59.9 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.78 cputime=721.930 memavail=693732 print_time=5282.194 buffer_time=2.120 print_stall=0 extruder: target=220 temp=220.1 pwm=0.541
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5280.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8316199 bytes_read=2600836 bytes_retransmit=0 bytes_invalid=0 send_seq=172915 receive_seq=172912 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=1774 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30340 bytes_read=95391 bytes_retransmit=0 bytes_invalid=0 send_seq=5031 receive_seq=5031 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999300 sd_pos=1873048 heater_bed: target=60 temp=59.9 pwm=0.226 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.2 sysload=0.78 cputime=722.341 memavail=693864 print_time=5283.450 buffer_time=2.202 print_stall=0 extruder: target=220 temp=219.9 pwm=0.611
Stats 5281.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8321423 bytes_read=2601702 bytes_retransmit=0 bytes_invalid=0 send_seq=173005 receive_seq=173005 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=1731 freq=180001320 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30346 bytes_read=95407 bytes_retransmit=0 bytes_invalid=0 send_seq=5032 receive_seq=5032 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999321 sd_pos=1875594 heater_bed: target=60 temp=59.9 pwm=0.171 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.88 cputime=722.554 memavail=693864 print_time=5284.438 buffer_time=2.189 print_stall=0 extruder: target=220 temp=219.8 pwm=0.611
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5282.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000016 bytes_write=8326363 bytes_read=2602553 bytes_retransmit=0 bytes_invalid=0 send_seq=173092 receive_seq=173092 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=1242 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30352 bytes_read=95423 bytes_retransmit=0 bytes_invalid=0 send_seq=5033 receive_seq=5033 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999333 sd_pos=1878067 heater_bed: target=60 temp=59.9 pwm=0.133 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=0.88 cputime=722.930 memavail=694000 print_time=5285.350 buffer_time=2.101 print_stall=0 extruder: target=220 temp=219.6 pwm=0.666
Stats 5283.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8331751 bytes_read=2603489 bytes_retransmit=0 bytes_invalid=0 send_seq=173185 receive_seq=173185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=168 freq=180001322 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30358 bytes_read=95439 bytes_retransmit=0 bytes_invalid=0 send_seq=5034 receive_seq=5034 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999379 sd_pos=1880229 heater_bed: target=60 temp=59.9 pwm=0.075 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.88 cputime=723.135 memavail=694116 print_time=5286.437 buffer_time=2.187 print_stall=0 extruder: target=220 temp=219.6 pwm=0.666
Stats 5284.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8336339 bytes_read=2604315 bytes_retransmit=0 bytes_invalid=0 send_seq=173270 receive_seq=173270 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30364 bytes_read=95455 bytes_retransmit=0 bytes_invalid=0 send_seq=5035 receive_seq=5035 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999331 sd_pos=1882361 heater_bed: target=60 temp=59.9 pwm=0.225 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.88 cputime=723.294 memavail=694116 print_time=5287.494 buffer_time=2.243 print_stall=0 extruder: target=220 temp=219.7 pwm=0.614
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5285.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8340560 bytes_read=2605152 bytes_retransmit=0 bytes_invalid=0 send_seq=173352 receive_seq=173352 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=226 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30370 bytes_read=95484 bytes_retransmit=0 bytes_invalid=0 send_seq=5036 receive_seq=5036 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999312 sd_pos=1883660 heater_bed: target=60 temp=59.9 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.88 cputime=723.621 memavail=694004 print_time=5288.462 buffer_time=2.210 print_stall=0 extruder: target=220 temp=219.8 pwm=0.614
Stats 5286.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8343416 bytes_read=2605871 bytes_retransmit=0 bytes_invalid=0 send_seq=173407 receive_seq=173407 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30376 bytes_read=95500 bytes_retransmit=0 bytes_invalid=0 send_seq=5037 receive_seq=5037 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999216 sd_pos=1883935 heater_bed: target=60 temp=59.9 pwm=0.223 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=0.89 cputime=723.743 memavail=694128 print_time=5289.307 buffer_time=2.054 print_stall=0 extruder: target=220 temp=220.1 pwm=0.542
Stats 5287.1: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000013 mcu_task_stddev=0.000015 bytes_write=8345618 bytes_read=2606507 bytes_retransmit=0 bytes_invalid=0 send_seq=173454 receive_seq=173454 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30382 bytes_read=95516 bytes_retransmit=0 bytes_invalid=0 send_seq=5038 receive_seq=5038 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999203 sd_pos=1884467 heater_bed: target=60 temp=59.9 pwm=0.164 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.4 sysload=0.89 cputime=723.903 memavail=694128 print_time=5290.265 buffer_time=2.012 print_stall=0 extruder: target=220 temp=220.4 pwm=0.542
Stats 5288.1: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8348712 bytes_read=2607275 bytes_retransmit=0 bytes_invalid=0 send_seq=173519 receive_seq=173519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30388 bytes_read=95532 bytes_retransmit=0 bytes_invalid=0 send_seq=5039 receive_seq=5039 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999249 sd_pos=1884778 heater_bed: target=60 temp=59.9 pwm=0.190 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.5 sysload=0.89 cputime=724.074 memavail=693456 print_time=5291.527 buffer_time=2.273 print_stall=0 extruder: target=220 temp=220.3 pwm=0.547
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5289.2: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8356157 bytes_read=2608405 bytes_retransmit=0 bytes_invalid=0 send_seq=173654 receive_seq=173654 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=1407 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30394 bytes_read=95548 bytes_retransmit=0 bytes_invalid=0 send_seq=5040 receive_seq=5040 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999273 sd_pos=1886538 heater_bed: target=60 temp=60.0 pwm=0.000 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.89 cputime=724.666 memavail=693644 print_time=5293.287 buffer_time=2.882 print_stall=0 extruder: target=220 temp=220.3 pwm=0.569
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5290.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8358917 bytes_read=2609186 bytes_retransmit=0 bytes_invalid=0 send_seq=173712 receive_seq=173711 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=3079 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=30406 bytes_read=95592 bytes_retransmit=0 bytes_invalid=0 send_seq=5042 receive_seq=5042 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999647 adj=49999307 sd_pos=1887440 heater_bed: target=60 temp=59.9 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=0.89 cputime=725.166 memavail=693636 print_time=5293.792 buffer_time=2.166 print_stall=0 extruder: target=220 temp=220.3 pwm=0.569
Stats 5291.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8361841 bytes_read=2609916 bytes_retransmit=0 bytes_invalid=0 send_seq=173771 receive_seq=173771 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3642 freq=180001396 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=30412 bytes_read=95607 bytes_retransmit=0 bytes_invalid=0 send_seq=5043 receive_seq=5043 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999087 sd_pos=1887929 heater_bed: target=60 temp=59.9 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=0.90 cputime=725.315 memavail=693640 print_time=5295.084 buffer_time=2.458 print_stall=0 extruder: target=220 temp=220.1 pwm=0.569
Stats 5292.4: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8368766 bytes_read=2610932 bytes_retransmit=0 bytes_invalid=0 send_seq=173889 receive_seq=173889 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001386 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=30418 bytes_read=95622 bytes_retransmit=0 bytes_invalid=0 send_seq=5044 receive_seq=5044 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999105 sd_pos=1888244 heater_bed: target=60 temp=59.8 pwm=0.223 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=0.90 cputime=725.493 memavail=693640 print_time=5296.214 buffer_time=2.588 print_stall=0 extruder: target=220 temp=219.8 pwm=0.658
Stats 5293.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8370291 bytes_read=2611539 bytes_retransmit=0 bytes_invalid=0 send_seq=173927 receive_seq=173927 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=30424 bytes_read=95637 bytes_retransmit=0 bytes_invalid=0 send_seq=5045 receive_seq=5045 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999152 sd_pos=1888496 heater_bed: target=60 temp=59.8 pwm=0.294 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.1 sysload=0.90 cputime=725.618 memavail=693640 print_time=5296.839 buffer_time=2.212 print_stall=0 extruder: target=220 temp=219.7 pwm=0.658
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5294.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8376508 bytes_read=2612574 bytes_retransmit=0 bytes_invalid=0 send_seq=174040 receive_seq=174040 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=30430 bytes_read=95652 bytes_retransmit=0 bytes_invalid=0 send_seq=5046 receive_seq=5046 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999171 sd_pos=1889639 heater_bed: target=60 temp=59.9 pwm=0.218 raspberry_pi: temp=41.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.90 cputime=726.142 memavail=693644 print_time=5298.066 buffer_time=2.439 print_stall=0 extruder: target=220 temp=219.6 pwm=0.658
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5295.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8379312 bytes_read=2613284 bytes_retransmit=0 bytes_invalid=0 send_seq=174100 receive_seq=174100 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1310 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30436 bytes_read=95681 bytes_retransmit=0 bytes_invalid=0 send_seq=5047 receive_seq=5047 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999182 sd_pos=1890718 heater_bed: target=60 temp=59.9 pwm=0.227 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.90 cputime=726.521 memavail=693644 print_time=5298.769 buffer_time=2.141 print_stall=0 extruder: target=220 temp=219.8 pwm=0.592
Stats 5296.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8382745 bytes_read=2614016 bytes_retransmit=0 bytes_invalid=0 send_seq=174166 receive_seq=174166 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=2119 freq=180001364 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30442 bytes_read=95697 bytes_retransmit=0 bytes_invalid=0 send_seq=5048 receive_seq=5048 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999191 sd_pos=1893154 heater_bed: target=60 temp=59.9 pwm=0.198 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.3 sysload=0.91 cputime=726.718 memavail=693644 print_time=5299.650 buffer_time=2.021 print_stall=0 extruder: target=220 temp=220.0 pwm=0.592
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5297.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8389234 bytes_read=2615016 bytes_retransmit=0 bytes_invalid=0 send_seq=174278 receive_seq=174278 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=777 freq=180001355 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30448 bytes_read=95713 bytes_retransmit=0 bytes_invalid=0 send_seq=5049 receive_seq=5049 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999214 sd_pos=1895582 heater_bed: target=60 temp=59.9 pwm=0.205 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.3 sysload=0.91 cputime=727.120 memavail=693652 print_time=5300.661 buffer_time=2.032 print_stall=0 extruder: target=220 temp=220.2 pwm=0.537
Stats 5298.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8394325 bytes_read=2615884 bytes_retransmit=0 bytes_invalid=0 send_seq=174366 receive_seq=174366 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=1609 freq=180001351 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30454 bytes_read=95729 bytes_retransmit=0 bytes_invalid=0 send_seq=5050 receive_seq=5050 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999282 sd_pos=1898773 heater_bed: target=60 temp=59.8 pwm=0.220 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.91 cputime=727.354 memavail=694140 print_time=5301.860 buffer_time=2.230 print_stall=0 extruder: target=220 temp=220.2 pwm=0.537
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5299.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8399203 bytes_read=2616725 bytes_retransmit=0 bytes_invalid=0 send_seq=174451 receive_seq=174451 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=974 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30460 bytes_read=95745 bytes_retransmit=0 bytes_invalid=0 send_seq=5051 receive_seq=5051 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999275 sd_pos=1901019 heater_bed: target=60 temp=59.8 pwm=0.234 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.91 cputime=727.696 memavail=694156 print_time=5302.744 buffer_time=2.113 print_stall=0 extruder: target=220 temp=220.2 pwm=0.537
Stats 5300.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8404289 bytes_read=2617630 bytes_retransmit=0 bytes_invalid=0 send_seq=174541 receive_seq=174541 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=799 freq=180001362 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30466 bytes_read=95774 bytes_retransmit=0 bytes_invalid=0 send_seq=5052 receive_seq=5052 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999640 adj=49999280 sd_pos=1903453 heater_bed: target=60 temp=59.9 pwm=0.155 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.91 cputime=727.895 memavail=693916 print_time=5303.657 buffer_time=2.025 print_stall=0 extruder: target=220 temp=220.2 pwm=0.537
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5301.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8409050 bytes_read=2618451 bytes_retransmit=0 bytes_invalid=0 send_seq=174625 receive_seq=174625 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=807 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30472 bytes_read=95790 bytes_retransmit=0 bytes_invalid=0 send_seq=5053 receive_seq=5053 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999218 sd_pos=1906252 heater_bed: target=60 temp=59.9 pwm=0.168 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.1 sysload=1.00 cputime=728.240 memavail=693916 print_time=5304.826 buffer_time=2.194 print_stall=0 extruder: target=220 temp=220.0 pwm=0.600
Stats 5302.4: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8413388 bytes_read=2619273 bytes_retransmit=0 bytes_invalid=0 send_seq=174704 receive_seq=174704 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30478 bytes_read=95806 bytes_retransmit=0 bytes_invalid=0 send_seq=5054 receive_seq=5054 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999235 sd_pos=1907849 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=728.419 memavail=693916 print_time=5305.662 buffer_time=2.029 print_stall=0 extruder: target=220 temp=219.9 pwm=0.600
Stats 5303.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8417496 bytes_read=2620103 bytes_retransmit=0 bytes_invalid=0 send_seq=174778 receive_seq=174778 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001356 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30484 bytes_read=95822 bytes_retransmit=0 bytes_invalid=0 send_seq=5055 receive_seq=5055 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999264 sd_pos=1909913 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=29.1 sysload=1.00 cputime=728.619 memavail=693920 print_time=5306.773 buffer_time=2.140 print_stall=0 extruder: target=220 temp=219.8 pwm=0.600
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5304.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8422612 bytes_read=2620979 bytes_retransmit=0 bytes_invalid=0 send_seq=174873 receive_seq=174873 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=663 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000010 bytes_write=30490 bytes_read=95838 bytes_retransmit=0 bytes_invalid=0 send_seq=5056 receive_seq=5056 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999639 adj=49999243 sd_pos=1911084 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=728.907 memavail=693920 print_time=5308.370 buffer_time=2.735 print_stall=0 extruder: target=220 temp=219.8 pwm=0.600
Stats 5305.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8424588 bytes_read=2621596 bytes_retransmit=0 bytes_invalid=0 send_seq=174911 receive_seq=174911 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30496 bytes_read=95867 bytes_retransmit=0 bytes_invalid=0 send_seq=5057 receive_seq=5057 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999244 sd_pos=1911284 heater_bed: target=60 temp=59.9 pwm=0.239 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.00 cputime=729.055 memavail=693920 print_time=5308.768 buffer_time=2.132 print_stall=0 extruder: target=220 temp=219.8 pwm=0.604
Stats 5306.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8426976 bytes_read=2622295 bytes_retransmit=0 bytes_invalid=0 send_seq=174962 receive_seq=174962 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30502 bytes_read=95883 bytes_retransmit=0 bytes_invalid=0 send_seq=5058 receive_seq=5058 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999644 adj=49999269 sd_pos=1911596 heater_bed: target=60 temp=60.0 pwm=0.165 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=1.00 cputime=729.219 memavail=693928 print_time=5309.772 buffer_time=2.136 print_stall=0 extruder: target=220 temp=219.9 pwm=0.604
Stats 5307.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8429748 bytes_read=2622997 bytes_retransmit=0 bytes_invalid=0 send_seq=175020 receive_seq=175020 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001395 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30508 bytes_read=95899 bytes_retransmit=0 bytes_invalid=0 send_seq=5059 receive_seq=5059 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999645 adj=49999192 sd_pos=1911952 heater_bed: target=60 temp=60.0 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=1.00 cputime=729.383 memavail=693928 print_time=5310.839 buffer_time=2.201 print_stall=0 extruder: target=220 temp=220.0 pwm=0.544
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5308.4: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8436325 bytes_read=2624024 bytes_retransmit=0 bytes_invalid=0 send_seq=175139 receive_seq=175139 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=35 stalled_bytes=3358 freq=180001395 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30514 bytes_read=95915 bytes_retransmit=0 bytes_invalid=0 send_seq=5060 receive_seq=5060 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999192 sd_pos=1913780 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=729.853 memavail=693680 print_time=5312.635 buffer_time=2.996 print_stall=0 extruder: target=220 temp=220.1 pwm=0.544
Stats 5309.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8439100 bytes_read=2624739 bytes_retransmit=0 bytes_invalid=0 send_seq=175191 receive_seq=175191 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=2152 freq=180001390 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30520 bytes_read=95931 bytes_retransmit=0 bytes_invalid=0 send_seq=5061 receive_seq=5061 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999236 sd_pos=1914066 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=1.00 cputime=729.994 memavail=693688 print_time=5313.196 buffer_time=2.524 print_stall=0 extruder: target=220 temp=220.2 pwm=0.544
Stats 5310.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8443075 bytes_read=2625531 bytes_retransmit=0 bytes_invalid=0 send_seq=175267 receive_seq=175267 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=984 freq=180001389 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=30526 bytes_read=95960 bytes_retransmit=0 bytes_invalid=0 send_seq=5062 receive_seq=5062 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999346 sd_pos=1914378 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=1.00 cputime=730.193 memavail=693688 print_time=5314.285 buffer_time=2.612 print_stall=0 extruder: target=220 temp=220.1 pwm=0.544
Stats 5311.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8445665 bytes_read=2626211 bytes_retransmit=0 bytes_invalid=0 send_seq=175314 receive_seq=175314 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=30532 bytes_read=95976 bytes_retransmit=0 bytes_invalid=0 send_seq=5063 receive_seq=5063 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999383 sd_pos=1914714 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=1.00 cputime=730.312 memavail=693688 print_time=5314.928 buffer_time=2.255 print_stall=0 extruder: target=220 temp=220.0 pwm=0.608
Stats 5312.5: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8448404 bytes_read=2626922 bytes_retransmit=0 bytes_invalid=0 send_seq=175371 receive_seq=175371 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=30538 bytes_read=95992 bytes_retransmit=0 bytes_invalid=0 send_seq=5064 receive_seq=5064 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999375 sd_pos=1915217 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=730.466 memavail=693944 print_time=5316.155 buffer_time=2.482 print_stall=0 extruder: target=220 temp=219.9 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5313.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8455027 bytes_read=2628008 bytes_retransmit=0 bytes_invalid=0 send_seq=175492 receive_seq=175491 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=1074 freq=180001375 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=30544 bytes_read=96008 bytes_retransmit=0 bytes_invalid=0 send_seq=5065 receive_seq=5065 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999362 sd_pos=1916784 heater_bed: target=60 temp=60.0 pwm=0.193 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=1.00 cputime=731.317 memavail=693944 print_time=5317.217 buffer_time=2.353 print_stall=0 extruder: target=220 temp=219.6 pwm=0.673
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5314.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8457564 bytes_read=2628639 bytes_retransmit=0 bytes_invalid=0 send_seq=175537 receive_seq=175537 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=9190 freq=180001377 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000017 bytes_write=30550 bytes_read=96024 bytes_retransmit=0 bytes_invalid=0 send_seq=5066 receive_seq=5066 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999340 sd_pos=1918659 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=1.00 cputime=731.793 memavail=693944 print_time=5318.416 buffer_time=2.553 print_stall=0 extruder: target=220 temp=219.7 pwm=0.673
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5315.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8462987 bytes_read=2629580 bytes_retransmit=0 bytes_invalid=0 send_seq=175637 receive_seq=175637 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=8958 freq=180001372 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30556 bytes_read=96053 bytes_retransmit=0 bytes_invalid=0 send_seq=5067 receive_seq=5067 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999290 sd_pos=1919957 heater_bed: target=60 temp=60.1 pwm=0.068 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=1.00 cputime=732.077 memavail=693956 print_time=5319.141 buffer_time=2.276 print_stall=0 extruder: target=220 temp=219.8 pwm=0.590
Stats 5316.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8472091 bytes_read=2630775 bytes_retransmit=0 bytes_invalid=0 send_seq=175790 receive_seq=175790 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=4477 freq=180001367 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30562 bytes_read=96069 bytes_retransmit=0 bytes_invalid=0 send_seq=5068 receive_seq=5068 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999289 sd_pos=1922242 heater_bed: target=60 temp=60.2 pwm=0.119 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=732.280 memavail=693956 print_time=5320.017 buffer_time=2.152 print_stall=0 extruder: target=220 temp=219.9 pwm=0.590
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5317.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8480722 bytes_read=2631901 bytes_retransmit=0 bytes_invalid=0 send_seq=175935 receive_seq=175935 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=582 freq=180001375 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30568 bytes_read=96085 bytes_retransmit=0 bytes_invalid=0 send_seq=5069 receive_seq=5069 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999284 sd_pos=1924597 heater_bed: target=60 temp=60.1 pwm=0.170 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=1.00 cputime=732.672 memavail=693852 print_time=5320.970 buffer_time=2.104 print_stall=0 extruder: target=220 temp=220.1 pwm=0.590
Stats 5318.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8485484 bytes_read=2632762 bytes_retransmit=0 bytes_invalid=0 send_seq=176018 receive_seq=176018 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=1638 freq=180001408 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30574 bytes_read=96101 bytes_retransmit=0 bytes_invalid=0 send_seq=5070 receive_seq=5070 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999312 sd_pos=1927686 heater_bed: target=60 temp=60.1 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=1.00 cputime=732.905 memavail=693696 print_time=5322.132 buffer_time=2.266 print_stall=0 extruder: target=220 temp=220.2 pwm=0.535
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5319.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8490339 bytes_read=2633624 bytes_retransmit=0 bytes_invalid=0 send_seq=176104 receive_seq=176104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=814 freq=180001483 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=30580 bytes_read=96117 bytes_retransmit=0 bytes_invalid=0 send_seq=5071 receive_seq=5071 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999200 sd_pos=1930034 heater_bed: target=60 temp=60.1 pwm=0.153 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=1.00 cputime=733.236 memavail=693696 print_time=5322.992 buffer_time=2.099 print_stall=0 extruder: target=220 temp=220.3 pwm=0.535
Stats 5320.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8495354 bytes_read=2634442 bytes_retransmit=0 bytes_invalid=0 send_seq=176191 receive_seq=176190 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=317 freq=180001484 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30586 bytes_read=96146 bytes_retransmit=0 bytes_invalid=0 send_seq=5072 receive_seq=5072 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49998915 sd_pos=1932501 heater_bed: target=60 temp=60.2 pwm=0.121 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=733.432 memavail=693696 print_time=5323.907 buffer_time=2.014 print_stall=0 extruder: target=220 temp=220.4 pwm=0.535
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5321.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8500111 bytes_read=2635318 bytes_retransmit=0 bytes_invalid=0 send_seq=176274 receive_seq=176274 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=47 stalled_bytes=727 freq=180001466 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30592 bytes_read=96162 bytes_retransmit=0 bytes_invalid=0 send_seq=5073 receive_seq=5073 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49998929 sd_pos=1935112 heater_bed: target=60 temp=60.2 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.00 cputime=733.811 memavail=693672 print_time=5325.138 buffer_time=2.232 print_stall=0 extruder: target=220 temp=220.4 pwm=0.535
Stats 5322.7: gcodein=0  mcu: mcu_awake=0.019 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8504945 bytes_read=2636168 bytes_retransmit=0 bytes_invalid=0 send_seq=176361 receive_seq=176361 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=15 stalled_bytes=0 freq=180001450 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30598 bytes_read=96178 bytes_retransmit=0 bytes_invalid=0 send_seq=5074 receive_seq=5074 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999064 sd_pos=1937271 heater_bed: target=60 temp=60.2 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.00 cputime=734.007 memavail=693708 print_time=5326.207 buffer_time=2.263 print_stall=0 extruder: target=220 temp=220.3 pwm=0.555
Stats 5323.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8507849 bytes_read=2636890 bytes_retransmit=0 bytes_invalid=0 send_seq=176419 receive_seq=176419 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001448 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30604 bytes_read=96194 bytes_retransmit=0 bytes_invalid=0 send_seq=5075 receive_seq=5075 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999146 sd_pos=1938638 heater_bed: target=60 temp=60.2 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.00 cputime=734.145 memavail=693360 print_time=5327.014 buffer_time=2.069 print_stall=0 extruder: target=220 temp=220.1 pwm=0.555
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5324.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8513250 bytes_read=2637845 bytes_retransmit=0 bytes_invalid=0 send_seq=176519 receive_seq=176519 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=215 freq=180001439 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30610 bytes_read=96210 bytes_retransmit=0 bytes_invalid=0 send_seq=5076 receive_seq=5076 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999199 sd_pos=1940227 heater_bed: target=60 temp=60.2 pwm=0.176 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.1 sysload=1.00 cputime=734.645 memavail=693444 print_time=5328.139 buffer_time=2.194 print_stall=0 extruder: target=220 temp=219.9 pwm=0.633
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5325.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8517111 bytes_read=2638591 bytes_retransmit=0 bytes_invalid=0 send_seq=176588 receive_seq=176588 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=684 freq=180001517 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=30616 bytes_read=96239 bytes_retransmit=0 bytes_invalid=0 send_seq=5077 receive_seq=5077 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999222 sd_pos=1941025 heater_bed: target=60 temp=60.2 pwm=0.154 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.00 cputime=735.076 memavail=693460 print_time=5329.270 buffer_time=2.324 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
Stats 5326.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8520315 bytes_read=2639312 bytes_retransmit=0 bytes_invalid=0 send_seq=176649 receive_seq=176649 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001503 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=30622 bytes_read=96255 bytes_retransmit=0 bytes_invalid=0 send_seq=5078 receive_seq=5078 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999015 sd_pos=1941444 heater_bed: target=60 temp=60.1 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=1.08 cputime=735.207 memavail=693460 print_time=5330.162 buffer_time=2.210 print_stall=0 extruder: target=220 temp=219.8 pwm=0.633
Stats 5327.7: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8523845 bytes_read=2640122 bytes_retransmit=0 bytes_invalid=0 send_seq=176720 receive_seq=176720 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001574 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=30628 bytes_read=96271 bytes_retransmit=0 bytes_invalid=0 send_seq=5079 receive_seq=5079 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999178 sd_pos=1941998 heater_bed: target=60 temp=60.2 pwm=0.141 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.08 cputime=735.391 memavail=693432 print_time=5331.468 buffer_time=2.516 print_stall=0 extruder: target=220 temp=219.9 pwm=0.578
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5328.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8529765 bytes_read=2641120 bytes_retransmit=0 bytes_invalid=0 send_seq=176832 receive_seq=176831 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=3676 freq=180001557 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=30634 bytes_read=96287 bytes_retransmit=0 bytes_invalid=0 send_seq=5080 receive_seq=5080 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49998959 sd_pos=1943965 heater_bed: target=60 temp=60.1 pwm=0.138 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.08 cputime=736.107 memavail=693472 print_time=5332.714 buffer_time=2.678 print_stall=0 extruder: target=220 temp=220.0 pwm=0.578
Stats 5329.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8533126 bytes_read=2641879 bytes_retransmit=0 bytes_invalid=0 send_seq=176895 receive_seq=176894 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=1874 freq=180001547 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=30640 bytes_read=96303 bytes_retransmit=0 bytes_invalid=0 send_seq=5081 receive_seq=5081 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999063 sd_pos=1944049 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.08 cputime=736.212 memavail=693668 print_time=5333.104 buffer_time=2.067 print_stall=0 extruder: target=220 temp=220.2 pwm=0.520
Stats 5330.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8537494 bytes_read=2642706 bytes_retransmit=0 bytes_invalid=0 send_seq=176977 receive_seq=176977 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=1311 freq=180001531 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30646 bytes_read=96332 bytes_retransmit=0 bytes_invalid=0 send_seq=5082 receive_seq=5082 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999118 sd_pos=1944722 heater_bed: target=60 temp=60.0 pwm=0.199 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.99 cputime=736.392 memavail=693724 print_time=5334.591 buffer_time=2.554 print_stall=0 extruder: target=220 temp=220.2 pwm=0.520
Stats 5331.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8541667 bytes_read=2643492 bytes_retransmit=0 bytes_invalid=0 send_seq=177051 receive_seq=177051 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001510 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30652 bytes_read=96348 bytes_retransmit=0 bytes_invalid=0 send_seq=5083 receive_seq=5083 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999251 sd_pos=1944994 heater_bed: target=60 temp=60.0 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.99 cputime=736.553 memavail=693724 print_time=5335.393 buffer_time=2.355 print_stall=0 extruder: target=220 temp=220.2 pwm=0.520
Stats 5332.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8543892 bytes_read=2644192 bytes_retransmit=0 bytes_invalid=0 send_seq=177100 receive_seq=177100 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001496 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30658 bytes_read=96364 bytes_retransmit=0 bytes_invalid=0 send_seq=5084 receive_seq=5084 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999283 sd_pos=1945223 heater_bed: target=60 temp=60.0 pwm=0.208 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.99 cputime=736.686 memavail=693620 print_time=5336.335 buffer_time=2.296 print_stall=0 extruder: target=220 temp=219.9 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5334.0: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8551188 bytes_read=2645319 bytes_retransmit=0 bytes_invalid=0 send_seq=177231 receive_seq=177231 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=1439 freq=180001496 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30664 bytes_read=96380 bytes_retransmit=0 bytes_invalid=0 send_seq=5085 receive_seq=5085 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999357 sd_pos=1946833 heater_bed: target=60 temp=60.0 pwm=0.126 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.99 cputime=737.300 memavail=693736 print_time=5338.019 buffer_time=2.834 print_stall=0 extruder: target=220 temp=219.8 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5335.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8553509 bytes_read=2645985 bytes_retransmit=0 bytes_invalid=0 send_seq=177280 receive_seq=177279 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=3844 freq=180001483 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30670 bytes_read=96409 bytes_retransmit=0 bytes_invalid=0 send_seq=5086 receive_seq=5086 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999315 sd_pos=1948049 heater_bed: target=60 temp=60.0 pwm=0.186 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.99 cputime=737.720 memavail=693736 print_time=5338.788 buffer_time=2.510 print_stall=0 extruder: target=220 temp=219.6 pwm=0.684
Stats 5336.1: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8556001 bytes_read=2646671 bytes_retransmit=0 bytes_invalid=0 send_seq=177325 receive_seq=177325 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=3852 freq=180001472 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30676 bytes_read=96425 bytes_retransmit=0 bytes_invalid=0 send_seq=5087 receive_seq=5087 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999336 sd_pos=1949516 heater_bed: target=60 temp=60.0 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.91 cputime=737.868 memavail=693684 print_time=5339.343 buffer_time=2.065 print_stall=0 extruder: target=220 temp=219.6 pwm=0.684
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5337.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8565246 bytes_read=2647876 bytes_retransmit=0 bytes_invalid=0 send_seq=177483 receive_seq=177483 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=603 freq=180001555 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30682 bytes_read=96441 bytes_retransmit=0 bytes_invalid=0 send_seq=5088 receive_seq=5088 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999358 sd_pos=1952672 heater_bed: target=60 temp=59.9 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.91 cputime=738.275 memavail=693860 print_time=5340.580 buffer_time=2.164 print_stall=0 extruder: target=220 temp=219.6 pwm=0.627
Stats 5338.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8569676 bytes_read=2648727 bytes_retransmit=0 bytes_invalid=0 send_seq=177561 receive_seq=177561 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=81 freq=180001538 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30688 bytes_read=96457 bytes_retransmit=0 bytes_invalid=0 send_seq=5089 receive_seq=5089 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999032 sd_pos=1955077 heater_bed: target=60 temp=59.9 pwm=0.169 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=0.91 cputime=738.449 memavail=691312 print_time=5341.432 buffer_time=2.015 print_stall=0 extruder: target=220 temp=219.7 pwm=0.627
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5339.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8573931 bytes_read=2649522 bytes_retransmit=0 bytes_invalid=0 send_seq=177638 receive_seq=177637 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001526 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=30694 bytes_read=96473 bytes_retransmit=0 bytes_invalid=0 send_seq=5090 receive_seq=5090 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999108 sd_pos=1957875 heater_bed: target=60 temp=59.9 pwm=0.191 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.91 cputime=738.799 memavail=692856 print_time=5342.277 buffer_time=1.851 print_stall=0 extruder: target=220 temp=219.9 pwm=0.627
Stats 5340.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8579237 bytes_read=2650414 bytes_retransmit=0 bytes_invalid=0 send_seq=177731 receive_seq=177730 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=509 freq=180001505 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30700 bytes_read=96502 bytes_retransmit=0 bytes_invalid=0 send_seq=5091 receive_seq=5091 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999196 sd_pos=1960583 heater_bed: target=60 temp=59.9 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.91 cputime=739.012 memavail=692856 print_time=5343.523 buffer_time=2.096 print_stall=0 extruder: target=220 temp=220.1 pwm=0.547
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5341.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8583987 bytes_read=2651273 bytes_retransmit=0 bytes_invalid=0 send_seq=177814 receive_seq=177813 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=634 freq=180001504 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30706 bytes_read=96518 bytes_retransmit=0 bytes_invalid=0 send_seq=5092 receive_seq=5092 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999244 sd_pos=1963282 heater_bed: target=60 temp=60.0 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.84 cputime=739.342 memavail=692872 print_time=5344.666 buffer_time=2.235 print_stall=0 extruder: target=220 temp=220.3 pwm=0.547
Stats 5342.2: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8587279 bytes_read=2651990 bytes_retransmit=0 bytes_invalid=0 send_seq=177874 receive_seq=177874 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30712 bytes_read=96534 bytes_retransmit=0 bytes_invalid=0 send_seq=5093 receive_seq=5093 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999217 sd_pos=1964783 heater_bed: target=60 temp=59.9 pwm=0.209 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.2 sysload=0.84 cputime=739.522 memavail=693128 print_time=5345.464 buffer_time=2.033 print_stall=0 extruder: target=220 temp=220.4 pwm=0.493
Stats 5343.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8591157 bytes_read=2652800 bytes_retransmit=0 bytes_invalid=0 send_seq=177950 receive_seq=177950 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001492 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30718 bytes_read=96550 bytes_retransmit=0 bytes_invalid=0 send_seq=5094 receive_seq=5094 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999260 sd_pos=1966726 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.84 cputime=739.704 memavail=693128 print_time=5346.537 buffer_time=2.106 print_stall=0 extruder: target=220 temp=220.4 pwm=0.493
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5344.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8596605 bytes_read=2653749 bytes_retransmit=0 bytes_invalid=0 send_seq=178052 receive_seq=178052 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=2308 freq=180001499 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30724 bytes_read=96566 bytes_retransmit=0 bytes_invalid=0 send_seq=5095 receive_seq=5095 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999303 sd_pos=1968749 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.84 cputime=740.198 memavail=693128 print_time=5347.864 buffer_time=2.432 print_stall=0 extruder: target=220 temp=220.3 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5345.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8600971 bytes_read=2654585 bytes_retransmit=0 bytes_invalid=0 send_seq=178129 receive_seq=178128 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=1800 freq=180001517 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30730 bytes_read=96595 bytes_retransmit=0 bytes_invalid=0 send_seq=5096 receive_seq=5096 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999266 sd_pos=1969271 heater_bed: target=60 temp=60.0 pwm=0.162 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.84 cputime=740.650 memavail=693140 print_time=5348.922 buffer_time=2.288 print_stall=0 extruder: target=220 temp=220.1 pwm=0.614
Stats 5346.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8605438 bytes_read=2655396 bytes_retransmit=0 bytes_invalid=0 send_seq=178210 receive_seq=178210 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001499 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30736 bytes_read=96611 bytes_retransmit=0 bytes_invalid=0 send_seq=5097 receive_seq=5097 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999215 sd_pos=1969696 heater_bed: target=60 temp=60.0 pwm=0.097 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.77 cputime=740.784 memavail=693140 print_time=5349.840 buffer_time=2.206 print_stall=0 extruder: target=220 temp=219.9 pwm=0.614
Stats 5347.4: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8608856 bytes_read=2656168 bytes_retransmit=0 bytes_invalid=0 send_seq=178279 receive_seq=178279 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=41 stalled_bytes=0 freq=180001480 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30742 bytes_read=96627 bytes_retransmit=0 bytes_invalid=0 send_seq=5098 receive_seq=5098 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999300 sd_pos=1970281 heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.77 cputime=740.967 memavail=693140 print_time=5351.138 buffer_time=2.503 print_stall=0 extruder: target=220 temp=219.7 pwm=0.614
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5348.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8614695 bytes_read=2657148 bytes_retransmit=0 bytes_invalid=0 send_seq=178384 receive_seq=178383 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=1502 freq=180001480 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30748 bytes_read=96643 bytes_retransmit=0 bytes_invalid=0 send_seq=5099 receive_seq=5099 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999359 sd_pos=1971778 heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.77 cputime=741.747 memavail=693352 print_time=5352.147 buffer_time=2.456 print_stall=0 extruder: target=220 temp=219.8 pwm=0.614
Stats 5349.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8618080 bytes_read=2657895 bytes_retransmit=0 bytes_invalid=0 send_seq=178450 receive_seq=178450 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=533 freq=180001458 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30754 bytes_read=96659 bytes_retransmit=0 bytes_invalid=0 send_seq=5100 receive_seq=5100 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999365 sd_pos=1971915 heater_bed: target=60 temp=60.0 pwm=0.151 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.77 cputime=741.844 memavail=693396 print_time=5352.831 buffer_time=2.140 print_stall=0 extruder: target=220 temp=219.8 pwm=0.614
Stats 5350.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8621444 bytes_read=2658691 bytes_retransmit=0 bytes_invalid=0 send_seq=178518 receive_seq=178518 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001441 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30760 bytes_read=96688 bytes_retransmit=0 bytes_invalid=0 send_seq=5101 receive_seq=5101 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999417 sd_pos=1972418 heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.77 cputime=742.039 memavail=693396 print_time=5354.011 buffer_time=2.319 print_stall=0 extruder: target=220 temp=219.9 pwm=0.584
Stats 5351.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8624098 bytes_read=2659381 bytes_retransmit=0 bytes_invalid=0 send_seq=178573 receive_seq=178573 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001433 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30766 bytes_read=96704 bytes_retransmit=0 bytes_invalid=0 send_seq=5102 receive_seq=5102 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999437 sd_pos=1972695 heater_bed: target=60 temp=60.0 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.71 cputime=742.208 memavail=693404 print_time=5354.813 buffer_time=2.121 print_stall=0 extruder: target=220 temp=220.0 pwm=0.584
Stats 5352.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8626303 bytes_read=2660033 bytes_retransmit=0 bytes_invalid=0 send_seq=178621 receive_seq=178621 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001429 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30772 bytes_read=96720 bytes_retransmit=0 bytes_invalid=0 send_seq=5103 receive_seq=5103 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999445 sd_pos=1972950 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.71 cputime=742.376 memavail=693404 print_time=5355.753 buffer_time=2.060 print_stall=0 extruder: target=220 temp=220.1 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5353.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8633546 bytes_read=2661160 bytes_retransmit=0 bytes_invalid=0 send_seq=178752 receive_seq=178752 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=1350 freq=180001415 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30778 bytes_read=96736 bytes_retransmit=0 bytes_invalid=0 send_seq=5104 receive_seq=5104 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999443 sd_pos=1974652 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.2 sysload=0.71 cputime=742.969 memavail=693404 print_time=5357.417 buffer_time=2.723 print_stall=0 extruder: target=220 temp=220.1 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5354.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8635738 bytes_read=2661805 bytes_retransmit=0 bytes_invalid=0 send_seq=178798 receive_seq=178798 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=3622 freq=180001398 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30784 bytes_read=96752 bytes_retransmit=0 bytes_invalid=0 send_seq=5105 receive_seq=5105 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999372 sd_pos=1975806 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.71 cputime=743.340 memavail=693668 print_time=5358.139 buffer_time=2.445 print_stall=0 extruder: target=220 temp=220.1 pwm=0.548
Stats 5355.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8638255 bytes_read=2662442 bytes_retransmit=0 bytes_invalid=0 send_seq=178843 receive_seq=178843 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=3572 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30790 bytes_read=96781 bytes_retransmit=0 bytes_invalid=0 send_seq=5106 receive_seq=5106 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999410 sd_pos=1977186 heater_bed: target=60 temp=60.0 pwm=0.165 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.71 cputime=743.496 memavail=693668 print_time=5358.716 buffer_time=2.020 print_stall=0 extruder: target=220 temp=220.1 pwm=0.548
Stats 5356.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8646898 bytes_read=2663612 bytes_retransmit=0 bytes_invalid=0 send_seq=178988 receive_seq=178988 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=253 freq=180001394 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30796 bytes_read=96797 bytes_retransmit=0 bytes_invalid=0 send_seq=5107 receive_seq=5107 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999413 sd_pos=1980212 heater_bed: target=60 temp=60.1 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.65 cputime=743.746 memavail=693668 print_time=5359.850 buffer_time=2.155 print_stall=0 extruder: target=220 temp=220.0 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5357.5: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8651040 bytes_read=2664433 bytes_retransmit=0 bytes_invalid=0 send_seq=179067 receive_seq=179067 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30802 bytes_read=96813 bytes_retransmit=0 bytes_invalid=0 send_seq=5108 receive_seq=5108 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999422 sd_pos=1982653 heater_bed: target=60 temp=60.1 pwm=0.167 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.65 cputime=744.076 memavail=693668 print_time=5360.742 buffer_time=2.045 print_stall=0 extruder: target=220 temp=219.8 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5358.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8655720 bytes_read=2665194 bytes_retransmit=0 bytes_invalid=0 send_seq=179149 receive_seq=179138 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=555 freq=180001381 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30808 bytes_read=96829 bytes_retransmit=0 bytes_invalid=0 send_seq=5109 receive_seq=5109 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999425 sd_pos=1985775 heater_bed: target=60 temp=60.1 pwm=0.096 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.65 cputime=744.479 memavail=693924 print_time=5361.895 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.7 pwm=0.671
Stats 5359.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8659880 bytes_read=2666090 bytes_retransmit=0 bytes_invalid=0 send_seq=179226 receive_seq=179226 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=30814 bytes_read=96845 bytes_retransmit=0 bytes_invalid=0 send_seq=5110 receive_seq=5110 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999360 sd_pos=1988295 heater_bed: target=60 temp=60.2 pwm=0.064 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.65 cputime=744.663 memavail=693924 print_time=5362.742 buffer_time=2.038 print_stall=0 extruder: target=220 temp=219.7 pwm=0.671
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5360.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8664461 bytes_read=2666931 bytes_retransmit=0 bytes_invalid=0 send_seq=179309 receive_seq=179309 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=207 freq=180001367 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30820 bytes_read=96874 bytes_retransmit=0 bytes_invalid=0 send_seq=5111 receive_seq=5111 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999410 sd_pos=1990798 heater_bed: target=60 temp=60.2 pwm=0.120 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=29.1 sysload=0.65 cputime=745.002 memavail=693936 print_time=5363.896 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.7 pwm=0.599
Stats 5361.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8668094 bytes_read=2667697 bytes_retransmit=0 bytes_invalid=0 send_seq=179379 receive_seq=179379 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001359 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30826 bytes_read=96890 bytes_retransmit=0 bytes_invalid=0 send_seq=5112 receive_seq=5112 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999447 sd_pos=1993090 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=29.1 sysload=0.68 cputime=745.234 memavail=693936 print_time=5364.930 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.9 pwm=0.599
Stats 5362.5: gcodein=0  mcu: mcu_awake=0.016 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8671445 bytes_read=2668482 bytes_retransmit=0 bytes_invalid=0 send_seq=179445 receive_seq=179445 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30832 bytes_read=96906 bytes_retransmit=0 bytes_invalid=0 send_seq=5113 receive_seq=5113 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999508 sd_pos=1994771 heater_bed: target=60 temp=60.1 pwm=0.166 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.68 cputime=745.453 memavail=693936 print_time=5365.968 buffer_time=2.218 print_stall=0 extruder: target=220 temp=220.2 pwm=0.522
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5363.5: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8675235 bytes_read=2669264 bytes_retransmit=0 bytes_invalid=0 send_seq=179518 receive_seq=179518 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001345 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30838 bytes_read=96922 bytes_retransmit=0 bytes_invalid=0 send_seq=5114 receive_seq=5114 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999459 sd_pos=1995701 heater_bed: target=60 temp=60.1 pwm=0.166 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.68 cputime=745.729 memavail=693936 print_time=5366.770 buffer_time=2.019 print_stall=0 extruder: target=220 temp=220.5 pwm=0.522
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5364.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8678896 bytes_read=2670060 bytes_retransmit=0 bytes_invalid=0 send_seq=179589 receive_seq=179589 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=30844 bytes_read=96938 bytes_retransmit=0 bytes_invalid=0 send_seq=5115 receive_seq=5115 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999462 sd_pos=1996192 heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=0.68 cputime=746.039 memavail=693944 print_time=5368.009 buffer_time=2.252 print_stall=0 extruder: target=220 temp=220.5 pwm=0.522
Stats 5365.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8682252 bytes_read=2670825 bytes_retransmit=0 bytes_invalid=0 send_seq=179656 receive_seq=179656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30850 bytes_read=96967 bytes_retransmit=0 bytes_invalid=0 send_seq=5116 receive_seq=5116 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999429 sd_pos=1996772 heater_bed: target=60 temp=60.1 pwm=0.093 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=29.0 sysload=0.68 cputime=746.227 memavail=693944 print_time=5369.376 buffer_time=2.619 print_stall=0 extruder: target=220 temp=220.5 pwm=0.522
Stats 5366.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8683752 bytes_read=2671427 bytes_retransmit=0 bytes_invalid=0 send_seq=179694 receive_seq=179694 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30856 bytes_read=96983 bytes_retransmit=0 bytes_invalid=0 send_seq=5117 receive_seq=5117 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999403 sd_pos=1996967 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.63 cputime=746.370 memavail=693956 print_time=5369.953 buffer_time=2.195 print_stall=0 extruder: target=220 temp=220.3 pwm=0.558
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5367.6: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8690653 bytes_read=2672453 bytes_retransmit=0 bytes_invalid=0 send_seq=179818 receive_seq=179818 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=554 freq=180001316 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30862 bytes_read=96999 bytes_retransmit=0 bytes_invalid=0 send_seq=5118 receive_seq=5118 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999432 sd_pos=1998476 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.63 cputime=746.894 memavail=693672 print_time=5370.952 buffer_time=2.194 print_stall=0 extruder: target=220 temp=220.2 pwm=0.558
Stats 5368.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8692923 bytes_read=2673147 bytes_retransmit=0 bytes_invalid=0 send_seq=179865 receive_seq=179865 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=1311 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30868 bytes_read=97015 bytes_retransmit=0 bytes_invalid=0 send_seq=5119 receive_seq=5119 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999428 sd_pos=1998885 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.63 cputime=747.027 memavail=693696 print_time=5372.190 buffer_time=2.431 print_stall=0 extruder: target=220 temp=220.0 pwm=0.615
Stats 5369.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8696710 bytes_read=2673898 bytes_retransmit=0 bytes_invalid=0 send_seq=179935 receive_seq=179935 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=30874 bytes_read=97031 bytes_retransmit=0 bytes_invalid=0 send_seq=5120 receive_seq=5120 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999370 sd_pos=1999182 heater_bed: target=60 temp=60.0 pwm=0.157 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.63 cputime=747.200 memavail=693700 print_time=5373.145 buffer_time=2.385 print_stall=0 extruder: target=220 temp=219.8 pwm=0.615
Stats 5370.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8699992 bytes_read=2674669 bytes_retransmit=0 bytes_invalid=0 send_seq=180001 receive_seq=180001 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=39 stalled_bytes=0 freq=180001315 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=30880 bytes_read=97060 bytes_retransmit=0 bytes_invalid=0 send_seq=5121 receive_seq=5121 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999358 sd_pos=1999519 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.63 cputime=747.380 memavail=693700 print_time=5374.377 buffer_time=2.616 print_stall=0 extruder: target=220 temp=219.8 pwm=0.615
Stats 5371.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8701907 bytes_read=2675325 bytes_retransmit=0 bytes_invalid=0 send_seq=180044 receive_seq=180044 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=30886 bytes_read=97076 bytes_retransmit=0 bytes_invalid=0 send_seq=5122 receive_seq=5122 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999404 sd_pos=1999802 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.58 cputime=747.524 memavail=693700 print_time=5374.979 buffer_time=2.218 print_stall=0 extruder: target=220 temp=219.7 pwm=0.615
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5372.6: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8708291 bytes_read=2676306 bytes_retransmit=0 bytes_invalid=0 send_seq=180160 receive_seq=180160 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=2271 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=30892 bytes_read=97092 bytes_retransmit=0 bytes_invalid=0 send_seq=5123 receive_seq=5123 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999409 sd_pos=2001604 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.58 cputime=748.221 memavail=693456 print_time=5376.407 buffer_time=2.645 print_stall=0 extruder: target=220 temp=219.8 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5373.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8710871 bytes_read=2677023 bytes_retransmit=0 bytes_invalid=0 send_seq=180212 receive_seq=180212 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=3453 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=30898 bytes_read=97108 bytes_retransmit=0 bytes_invalid=0 send_seq=5124 receive_seq=5124 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999390 sd_pos=2002596 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=0.58 cputime=748.602 memavail=693456 print_time=5377.044 buffer_time=2.282 print_stall=0 extruder: target=220 temp=219.9 pwm=0.608
Stats 5374.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8715019 bytes_read=2677834 bytes_retransmit=0 bytes_invalid=0 send_seq=180286 receive_seq=180286 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=2685 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000020 bytes_write=30904 bytes_read=97124 bytes_retransmit=0 bytes_invalid=0 send_seq=5125 receive_seq=5125 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999359 sd_pos=2005034 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=43.5 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.58 cputime=748.809 memavail=693456 print_time=5377.847 buffer_time=2.084 print_stall=0 extruder: target=220 temp=219.9 pwm=0.608
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5375.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8722518 bytes_read=2678875 bytes_retransmit=0 bytes_invalid=0 send_seq=180414 receive_seq=180414 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=413 freq=180001301 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30910 bytes_read=97153 bytes_retransmit=0 bytes_invalid=0 send_seq=5126 receive_seq=5126 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999486 sd_pos=2007985 heater_bed: target=60 temp=60.0 pwm=0.175 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.58 cputime=749.153 memavail=693460 print_time=5379.010 buffer_time=2.246 print_stall=0 extruder: target=220 temp=220.0 pwm=0.608
Stats 5376.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8726795 bytes_read=2679705 bytes_retransmit=0 bytes_invalid=0 send_seq=180494 receive_seq=180494 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=49 freq=180001299 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30916 bytes_read=97168 bytes_retransmit=0 bytes_invalid=0 send_seq=5127 receive_seq=5127 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999398 sd_pos=2010393 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.53 cputime=749.350 memavail=693460 print_time=5379.832 buffer_time=2.068 print_stall=0 extruder: target=220 temp=220.0 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5377.6: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8731259 bytes_read=2680566 bytes_retransmit=0 bytes_invalid=0 send_seq=180578 receive_seq=180578 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=203 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30922 bytes_read=97183 bytes_retransmit=0 bytes_invalid=0 send_seq=5128 receive_seq=5128 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999361 sd_pos=2013320 heater_bed: target=60 temp=60.0 pwm=0.211 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.2 sysload=0.53 cputime=749.692 memavail=693184 print_time=5380.977 buffer_time=2.211 print_stall=0 extruder: target=220 temp=220.0 pwm=0.584
Stats 5378.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8735278 bytes_read=2681343 bytes_retransmit=0 bytes_invalid=0 send_seq=180650 receive_seq=180650 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=58 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30928 bytes_read=97198 bytes_retransmit=0 bytes_invalid=0 send_seq=5129 receive_seq=5129 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999312 sd_pos=2015730 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=29.2 sysload=0.53 cputime=749.867 memavail=692968 print_time=5381.819 buffer_time=2.052 print_stall=0 extruder: target=220 temp=220.1 pwm=0.584
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5379.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8739496 bytes_read=2682174 bytes_retransmit=0 bytes_invalid=0 send_seq=180728 receive_seq=180728 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30934 bytes_read=97213 bytes_retransmit=0 bytes_invalid=0 send_seq=5130 receive_seq=5130 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999299 sd_pos=2018214 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.53 cputime=750.254 memavail=692968 print_time=5382.960 buffer_time=2.192 print_stall=0 extruder: target=220 temp=220.2 pwm=0.584
Stats 5380.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8743134 bytes_read=2682959 bytes_retransmit=0 bytes_invalid=0 send_seq=180799 receive_seq=180799 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=35 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=30940 bytes_read=97228 bytes_retransmit=0 bytes_invalid=0 send_seq=5131 receive_seq=5131 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999335 sd_pos=2020422 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.3 sysload=0.53 cputime=750.418 memavail=692968 print_time=5384.022 buffer_time=2.254 print_stall=0 extruder: target=220 temp=220.3 pwm=0.560
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5381.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8745337 bytes_read=2683585 bytes_retransmit=0 bytes_invalid=0 send_seq=180844 receive_seq=180844 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30946 bytes_read=97257 bytes_retransmit=0 bytes_invalid=0 send_seq=5132 receive_seq=5132 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999298 sd_pos=2021865 heater_bed: target=60 temp=60.0 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.65 cputime=750.680 memavail=692892 print_time=5384.848 buffer_time=2.080 print_stall=0 extruder: target=220 temp=220.3 pwm=0.560
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5382.6: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8752037 bytes_read=2684641 bytes_retransmit=0 bytes_invalid=0 send_seq=180964 receive_seq=180964 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=3952 freq=180001347 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30952 bytes_read=97273 bytes_retransmit=0 bytes_invalid=0 send_seq=5133 receive_seq=5133 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49998995 sd_pos=2023953 heater_bed: target=60 temp=60.0 pwm=0.145 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.2 sysload=0.65 cputime=751.224 memavail=692972 print_time=5386.696 buffer_time=2.927 print_stall=0 extruder: target=220 temp=220.2 pwm=0.560
Stats 5383.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8754721 bytes_read=2685332 bytes_retransmit=0 bytes_invalid=0 send_seq=181016 receive_seq=181016 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=2582 freq=180001338 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30958 bytes_read=97289 bytes_retransmit=0 bytes_invalid=0 send_seq=5134 receive_seq=5134 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999159 sd_pos=2024035 heater_bed: target=60 temp=60.0 pwm=0.145 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.65 cputime=751.343 memavail=692972 print_time=5387.065 buffer_time=2.295 print_stall=0 extruder: target=220 temp=220.2 pwm=0.560
Stats 5384.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8759529 bytes_read=2686174 bytes_retransmit=0 bytes_invalid=0 send_seq=181102 receive_seq=181102 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30964 bytes_read=97305 bytes_retransmit=0 bytes_invalid=0 send_seq=5135 receive_seq=5135 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999195 sd_pos=2024384 heater_bed: target=60 temp=60.0 pwm=0.093 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.65 cputime=751.519 memavail=693236 print_time=5387.926 buffer_time=2.155 print_stall=0 extruder: target=220 temp=220.2 pwm=0.559
Stats 5385.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8761873 bytes_read=2686869 bytes_retransmit=0 bytes_invalid=0 send_seq=181152 receive_seq=181152 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=30970 bytes_read=97321 bytes_retransmit=0 bytes_invalid=0 send_seq=5136 receive_seq=5136 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999199 sd_pos=2024641 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.65 cputime=751.653 memavail=693236 print_time=5388.882 buffer_time=2.110 print_stall=0 extruder: target=220 temp=220.1 pwm=0.559
Stats 5386.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8765163 bytes_read=2687625 bytes_retransmit=0 bytes_invalid=0 send_seq=181218 receive_seq=181218 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30976 bytes_read=97350 bytes_retransmit=0 bytes_invalid=0 send_seq=5137 receive_seq=5137 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999208 sd_pos=2025032 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.68 cputime=751.824 memavail=693236 print_time=5390.107 buffer_time=2.335 print_stall=0 extruder: target=220 temp=220.0 pwm=0.559
Stats 5387.6: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000013 bytes_write=8767535 bytes_read=2688276 bytes_retransmit=0 bytes_invalid=0 send_seq=181268 receive_seq=181268 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30982 bytes_read=97366 bytes_retransmit=0 bytes_invalid=0 send_seq=5138 receive_seq=5138 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999226 sd_pos=2025403 heater_bed: target=60 temp=60.0 pwm=0.159 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=0.68 cputime=751.952 memavail=693212 print_time=5391.106 buffer_time=2.332 print_stall=0 extruder: target=220 temp=220.0 pwm=0.559
Stats 5388.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8769300 bytes_read=2688958 bytes_retransmit=0 bytes_invalid=0 send_seq=181310 receive_seq=181310 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30988 bytes_read=97382 bytes_retransmit=0 bytes_invalid=0 send_seq=5139 receive_seq=5139 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999258 sd_pos=2025632 heater_bed: target=60 temp=60.0 pwm=0.131 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=0.68 cputime=752.081 memavail=693748 print_time=5391.796 buffer_time=2.021 print_stall=0 extruder: target=220 temp=220.0 pwm=0.559
Stats 5389.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8772035 bytes_read=2689669 bytes_retransmit=0 bytes_invalid=0 send_seq=181367 receive_seq=181367 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000013 bytes_write=30994 bytes_read=97398 bytes_retransmit=0 bytes_invalid=0 send_seq=5140 receive_seq=5140 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999258 sd_pos=2026162 heater_bed: target=60 temp=60.0 pwm=0.131 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.68 cputime=752.247 memavail=693748 print_time=5393.102 buffer_time=2.327 print_stall=0 extruder: target=220 temp=219.8 pwm=0.610
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5390.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8778821 bytes_read=2690762 bytes_retransmit=0 bytes_invalid=0 send_seq=181490 receive_seq=181489 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31000 bytes_read=97427 bytes_retransmit=0 bytes_invalid=0 send_seq=5141 receive_seq=5141 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999284 sd_pos=2027249 heater_bed: target=60 temp=60.1 pwm=0.052 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=0.78 cputime=752.881 memavail=693500 print_time=5394.567 buffer_time=2.444 print_stall=0 extruder: target=220 temp=219.6 pwm=0.610
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5391.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8781957 bytes_read=2691508 bytes_retransmit=0 bytes_invalid=0 send_seq=181553 receive_seq=181553 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=2128 freq=180001295 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31006 bytes_read=97443 bytes_retransmit=0 bytes_invalid=0 send_seq=5142 receive_seq=5142 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999325 sd_pos=2028777 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.78 cputime=753.207 memavail=693500 print_time=5395.166 buffer_time=2.043 print_stall=0 extruder: target=220 temp=219.6 pwm=0.610
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5392.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8785144 bytes_read=2692218 bytes_retransmit=0 bytes_invalid=0 send_seq=181613 receive_seq=181613 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=3823 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31012 bytes_read=97459 bytes_retransmit=0 bytes_invalid=0 send_seq=5143 receive_seq=5143 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999337 sd_pos=2030879 heater_bed: target=60 temp=60.1 pwm=0.111 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=0.78 cputime=753.485 memavail=693364 print_time=5396.307 buffer_time=2.183 print_stall=0 extruder: target=220 temp=219.6 pwm=0.658
Stats 5393.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8792950 bytes_read=2693300 bytes_retransmit=0 bytes_invalid=0 send_seq=181746 receive_seq=181746 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001290 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31018 bytes_read=97475 bytes_retransmit=0 bytes_invalid=0 send_seq=5144 receive_seq=5144 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999325 sd_pos=2033057 heater_bed: target=60 temp=60.1 pwm=0.182 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.78 cputime=753.666 memavail=693504 print_time=5397.141 buffer_time=2.016 print_stall=0 extruder: target=220 temp=219.6 pwm=0.658
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5394.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8797815 bytes_read=2694211 bytes_retransmit=0 bytes_invalid=0 send_seq=181837 receive_seq=181837 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=83 freq=180001285 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31024 bytes_read=97491 bytes_retransmit=0 bytes_invalid=0 send_seq=5145 receive_seq=5145 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999297 sd_pos=2036108 heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=0.78 cputime=754.060 memavail=693504 print_time=5398.324 buffer_time=2.198 print_stall=0 extruder: target=220 temp=219.7 pwm=0.604
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5395.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8801142 bytes_read=2694951 bytes_retransmit=0 bytes_invalid=0 send_seq=181902 receive_seq=181902 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001280 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31030 bytes_read=97520 bytes_retransmit=0 bytes_invalid=0 send_seq=5146 receive_seq=5146 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999287 sd_pos=2038220 heater_bed: target=60 temp=60.2 pwm=0.095 raspberry_pi: temp=43.5 mcu_temp: temp=38.4 chamber: temp=29.2 sysload=0.96 cputime=754.424 memavail=693600 print_time=5399.178 buffer_time=2.051 print_stall=0 extruder: target=220 temp=219.8 pwm=0.604
Stats 5396.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8806106 bytes_read=2695823 bytes_retransmit=0 bytes_invalid=0 send_seq=181994 receive_seq=181994 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=37 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31036 bytes_read=97536 bytes_retransmit=0 bytes_invalid=0 send_seq=5147 receive_seq=5147 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999306 sd_pos=2041174 heater_bed: target=60 temp=60.2 pwm=0.095 raspberry_pi: temp=43.5 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=0.96 cputime=754.643 memavail=693764 print_time=5400.279 buffer_time=2.151 print_stall=0 extruder: target=220 temp=220.0 pwm=0.541
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5397.9: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8810038 bytes_read=2696612 bytes_retransmit=0 bytes_invalid=0 send_seq=182070 receive_seq=182060 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31042 bytes_read=97552 bytes_retransmit=0 bytes_invalid=0 send_seq=5148 receive_seq=5148 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999240 sd_pos=2043706 heater_bed: target=60 temp=60.2 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=0.96 cputime=754.935 memavail=693964 print_time=5401.388 buffer_time=2.245 print_stall=0 extruder: target=220 temp=220.2 pwm=0.541
Stats 5398.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8812519 bytes_read=2697339 bytes_retransmit=0 bytes_invalid=0 send_seq=182122 receive_seq=182122 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=180001319 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31048 bytes_read=97568 bytes_retransmit=0 bytes_invalid=0 send_seq=5149 receive_seq=5149 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999254 sd_pos=2045150 heater_bed: target=60 temp=60.2 pwm=0.057 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=0.96 cputime=755.129 memavail=694000 print_time=5402.148 buffer_time=2.004 print_stall=0 extruder: target=220 temp=220.3 pwm=0.541
Stats 5399.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8815826 bytes_read=2698091 bytes_retransmit=0 bytes_invalid=0 send_seq=182187 receive_seq=182187 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31054 bytes_read=97584 bytes_retransmit=0 bytes_invalid=0 send_seq=5150 receive_seq=5150 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999220 sd_pos=2047013 heater_bed: target=60 temp=60.3 pwm=0.042 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=0.96 cputime=755.282 memavail=694020 print_time=5403.184 buffer_time=2.039 print_stall=0 extruder: target=220 temp=220.3 pwm=0.541
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5400.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8822187 bytes_read=2699110 bytes_retransmit=0 bytes_invalid=0 send_seq=182303 receive_seq=182302 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=2741 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31060 bytes_read=97613 bytes_retransmit=0 bytes_invalid=0 send_seq=5151 receive_seq=5151 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999237 sd_pos=2049086 heater_bed: target=60 temp=60.2 pwm=0.102 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.04 cputime=755.976 memavail=694020 print_time=5405.160 buffer_time=3.014 print_stall=0 extruder: target=220 temp=220.3 pwm=0.539
Stats 5401.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8825395 bytes_read=2699827 bytes_retransmit=0 bytes_invalid=0 send_seq=182363 receive_seq=182363 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=41 freq=180001296 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31066 bytes_read=97629 bytes_retransmit=0 bytes_invalid=0 send_seq=5152 receive_seq=5152 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999643 adj=49999264 sd_pos=2049086 heater_bed: target=60 temp=60.1 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.04 cputime=756.081 memavail=693696 print_time=5405.160 buffer_time=2.007 print_stall=0 extruder: target=220 temp=220.2 pwm=0.593
Stats 5403.0: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000013 bytes_write=8828219 bytes_read=2700522 bytes_retransmit=0 bytes_invalid=0 send_seq=182416 receive_seq=182416 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31072 bytes_read=97645 bytes_retransmit=0 bytes_invalid=0 send_seq=5153 receive_seq=5153 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999261 sd_pos=2049466 heater_bed: target=60 temp=60.1 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.04 cputime=756.218 memavail=693668 print_time=5406.402 buffer_time=2.239 print_stall=0 extruder: target=220 temp=220.1 pwm=0.593
Stats 5404.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8830598 bytes_read=2701223 bytes_retransmit=0 bytes_invalid=0 send_seq=182467 receive_seq=182467 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001309 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31078 bytes_read=97661 bytes_retransmit=0 bytes_invalid=0 send_seq=5154 receive_seq=5154 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999243 sd_pos=2049752 heater_bed: target=60 temp=60.0 pwm=0.178 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=1.04 cputime=756.351 memavail=693780 print_time=5407.368 buffer_time=2.206 print_stall=0 extruder: target=220 temp=220.0 pwm=0.593
Stats 5405.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8832982 bytes_read=2701900 bytes_retransmit=0 bytes_invalid=0 send_seq=182520 receive_seq=182520 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31084 bytes_read=97677 bytes_retransmit=0 bytes_invalid=0 send_seq=5155 receive_seq=5155 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999641 adj=49999207 sd_pos=2050062 heater_bed: target=60 temp=60.1 pwm=0.114 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.04 cputime=756.472 memavail=693564 print_time=5408.348 buffer_time=2.182 print_stall=0 extruder: target=220 temp=220.0 pwm=0.588
Stats 5406.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8836007 bytes_read=2702651 bytes_retransmit=0 bytes_invalid=0 send_seq=182582 receive_seq=182582 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31090 bytes_read=97706 bytes_retransmit=0 bytes_invalid=0 send_seq=5156 receive_seq=5156 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999230 sd_pos=2050432 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.04 cputime=756.629 memavail=693780 print_time=5409.587 buffer_time=2.421 print_stall=0 extruder: target=220 temp=220.0 pwm=0.588
Stats 5407.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8837841 bytes_read=2703302 bytes_retransmit=0 bytes_invalid=0 send_seq=182624 receive_seq=182624 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001291 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31096 bytes_read=97722 bytes_retransmit=0 bytes_invalid=0 send_seq=5157 receive_seq=5157 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999642 adj=49999271 sd_pos=2050660 heater_bed: target=60 temp=60.0 pwm=0.214 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.04 cputime=756.767 memavail=693780 print_time=5410.277 buffer_time=2.105 print_stall=0 extruder: target=220 temp=220.1 pwm=0.525
Stats 5408.0: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8840544 bytes_read=2703983 bytes_retransmit=0 bytes_invalid=0 send_seq=182680 receive_seq=182680 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001295 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31102 bytes_read=97738 bytes_retransmit=0 bytes_invalid=0 send_seq=5158 receive_seq=5158 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999646 adj=49999286 sd_pos=2051135 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.04 cputime=756.928 memavail=693660 print_time=5411.597 buffer_time=2.421 print_stall=0 extruder: target=220 temp=220.1 pwm=0.525
Stats 5409.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8842186 bytes_read=2704660 bytes_retransmit=0 bytes_invalid=0 send_seq=182721 receive_seq=182721 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001287 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31108 bytes_read=97754 bytes_retransmit=0 bytes_invalid=0 send_seq=5159 receive_seq=5159 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999328 sd_pos=2051325 heater_bed: target=60 temp=59.9 pwm=0.203 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=1.04 cputime=757.063 memavail=693792 print_time=5412.193 buffer_time=2.017 print_stall=0 extruder: target=220 temp=220.1 pwm=0.588
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5410.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8849521 bytes_read=2705741 bytes_retransmit=0 bytes_invalid=0 send_seq=182852 receive_seq=182852 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=4425 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31114 bytes_read=97770 bytes_retransmit=0 bytes_invalid=0 send_seq=5160 receive_seq=5160 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999373 sd_pos=2054507 heater_bed: target=60 temp=60.0 pwm=0.117 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=1.04 cputime=757.736 memavail=693792 print_time=5413.983 buffer_time=2.806 print_stall=0 extruder: target=220 temp=219.8 pwm=0.646
Stats 5411.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8851758 bytes_read=2706388 bytes_retransmit=0 bytes_invalid=0 send_seq=182899 receive_seq=182899 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=52 stalled_bytes=3832 freq=180001363 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31120 bytes_read=97799 bytes_retransmit=0 bytes_invalid=0 send_seq=5161 receive_seq=5161 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999130 sd_pos=2055299 heater_bed: target=60 temp=59.9 pwm=0.197 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.12 cputime=757.891 memavail=693688 print_time=5414.324 buffer_time=2.147 print_stall=0 extruder: target=220 temp=219.7 pwm=0.646
Stats 5412.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8858326 bytes_read=2707398 bytes_retransmit=0 bytes_invalid=0 send_seq=183013 receive_seq=183012 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=1800 freq=180001354 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31126 bytes_read=97815 bytes_retransmit=0 bytes_invalid=0 send_seq=5162 receive_seq=5162 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999157 sd_pos=2058135 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.12 cputime=758.129 memavail=693796 print_time=5415.378 buffer_time=2.200 print_stall=0 extruder: target=220 temp=219.5 pwm=0.646
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5413.0: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8863658 bytes_read=2708273 bytes_retransmit=0 bytes_invalid=0 send_seq=183104 receive_seq=183104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001369 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31132 bytes_read=97831 bytes_retransmit=0 bytes_invalid=0 send_seq=5163 receive_seq=5163 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999185 sd_pos=2060295 heater_bed: target=60 temp=59.9 pwm=0.144 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.12 cputime=758.468 memavail=693796 print_time=5416.246 buffer_time=2.068 print_stall=0 extruder: target=220 temp=219.5 pwm=0.646
Stats 5414.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8867821 bytes_read=2709095 bytes_retransmit=0 bytes_invalid=0 send_seq=183185 receive_seq=183185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001382 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31138 bytes_read=97847 bytes_retransmit=0 bytes_invalid=0 send_seq=5164 receive_seq=5164 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999128 sd_pos=2063202 heater_bed: target=60 temp=59.9 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.12 cputime=758.701 memavail=693888 print_time=5417.341 buffer_time=2.162 print_stall=0 extruder: target=220 temp=219.6 pwm=0.646
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5415.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8871365 bytes_read=2709894 bytes_retransmit=0 bytes_invalid=0 send_seq=183255 receive_seq=183255 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001453 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31144 bytes_read=97863 bytes_retransmit=0 bytes_invalid=0 send_seq=5165 receive_seq=5165 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999128 sd_pos=2065407 heater_bed: target=60 temp=59.9 pwm=0.157 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=29.1 sysload=1.12 cputime=759.004 memavail=694060 print_time=5418.226 buffer_time=2.046 print_stall=0 extruder: target=220 temp=219.8 pwm=0.581
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5416.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8875838 bytes_read=2710705 bytes_retransmit=0 bytes_invalid=0 send_seq=183338 receive_seq=183337 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001453 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31150 bytes_read=97879 bytes_retransmit=0 bytes_invalid=0 send_seq=5166 receive_seq=5166 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49998886 sd_pos=2068327 heater_bed: target=60 temp=59.9 pwm=0.157 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.11 cputime=759.341 memavail=694060 print_time=5419.389 buffer_time=2.159 print_stall=0 extruder: target=220 temp=220.0 pwm=0.581
Stats 5417.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8879065 bytes_read=2711461 bytes_retransmit=0 bytes_invalid=0 send_seq=183403 receive_seq=183403 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=11 freq=180001454 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31156 bytes_read=97908 bytes_retransmit=0 bytes_invalid=0 send_seq=5167 receive_seq=5167 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49998978 sd_pos=2070347 heater_bed: target=60 temp=59.9 pwm=0.154 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.11 cputime=759.487 memavail=693948 print_time=5420.435 buffer_time=2.205 print_stall=0 extruder: target=220 temp=220.3 pwm=0.529
Stats 5418.0: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8882356 bytes_read=2712240 bytes_retransmit=0 bytes_invalid=0 send_seq=183471 receive_seq=183470 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001439 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31162 bytes_read=97924 bytes_retransmit=0 bytes_invalid=0 send_seq=5168 receive_seq=5168 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999027 sd_pos=2072300 heater_bed: target=60 temp=59.8 pwm=0.195 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=1.11 cputime=759.704 memavail=693808 print_time=5421.470 buffer_time=2.235 print_stall=0 extruder: target=220 temp=220.4 pwm=0.529
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5419.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8889090 bytes_read=2713357 bytes_retransmit=0 bytes_invalid=0 send_seq=183595 receive_seq=183594 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=2328 freq=180001409 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31174 bytes_read=97956 bytes_retransmit=0 bytes_invalid=0 send_seq=5170 receive_seq=5170 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999208 sd_pos=2074288 heater_bed: target=60 temp=59.9 pwm=0.130 raspberry_pi: temp=43.5 mcu_temp: temp=38.2 chamber: temp=29.0 sysload=1.11 cputime=760.482 memavail=693808 print_time=5423.453 buffer_time=2.921 print_stall=0 extruder: target=220 temp=220.4 pwm=0.529
Stats 5420.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8891971 bytes_read=2714048 bytes_retransmit=0 bytes_invalid=0 send_seq=183649 receive_seq=183649 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=611 freq=180001400 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31180 bytes_read=97972 bytes_retransmit=0 bytes_invalid=0 send_seq=5171 receive_seq=5171 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999282 sd_pos=2074343 heater_bed: target=60 temp=59.9 pwm=0.130 raspberry_pi: temp=43.5 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=1.11 cputime=760.592 memavail=693816 print_time=5423.830 buffer_time=2.298 print_stall=0 extruder: target=220 temp=220.4 pwm=0.529
Stats 5421.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8894654 bytes_read=2714763 bytes_retransmit=0 bytes_invalid=0 send_seq=183701 receive_seq=183701 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001390 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31186 bytes_read=98001 bytes_retransmit=0 bytes_invalid=0 send_seq=5172 receive_seq=5172 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999321 sd_pos=2074641 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=42.9 mcu_temp: temp=38.1 chamber: temp=28.9 sysload=1.18 cputime=760.768 memavail=693816 print_time=5424.701 buffer_time=2.168 print_stall=0 extruder: target=220 temp=220.1 pwm=0.584
Stats 5422.3: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8896986 bytes_read=2715409 bytes_retransmit=0 bytes_invalid=0 send_seq=183750 receive_seq=183750 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001391 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31192 bytes_read=98017 bytes_retransmit=0 bytes_invalid=0 send_seq=5173 receive_seq=5173 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999364 sd_pos=2074898 heater_bed: target=60 temp=60.0 pwm=0.130 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.18 cputime=760.935 memavail=693816 print_time=5425.670 buffer_time=2.137 print_stall=0 extruder: target=220 temp=220.0 pwm=0.584
Stats 5423.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8899412 bytes_read=2716112 bytes_retransmit=0 bytes_invalid=0 send_seq=183802 receive_seq=183802 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31198 bytes_read=98033 bytes_retransmit=0 bytes_invalid=0 send_seq=5174 receive_seq=5174 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999398 sd_pos=2075205 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.18 cputime=761.109 memavail=694072 print_time=5426.649 buffer_time=2.115 print_stall=0 extruder: target=220 temp=219.8 pwm=0.659
Stats 5424.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8902324 bytes_read=2716846 bytes_retransmit=0 bytes_invalid=0 send_seq=183860 receive_seq=183860 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=40 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31204 bytes_read=98049 bytes_retransmit=0 bytes_invalid=0 send_seq=5175 receive_seq=5175 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999425 sd_pos=2075516 heater_bed: target=60 temp=60.1 pwm=0.118 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.18 cputime=761.283 memavail=694072 print_time=5427.892 buffer_time=2.357 print_stall=0 extruder: target=220 temp=219.8 pwm=0.659
Stats 5425.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8904062 bytes_read=2717458 bytes_retransmit=0 bytes_invalid=0 send_seq=183900 receive_seq=183900 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001372 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31210 bytes_read=98065 bytes_retransmit=0 bytes_invalid=0 send_seq=5176 receive_seq=5176 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999402 sd_pos=2075742 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.18 cputime=761.434 memavail=694072 print_time=5428.586 buffer_time=2.050 print_stall=0 extruder: target=220 temp=219.9 pwm=0.590
Stats 5426.3: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8906904 bytes_read=2718180 bytes_retransmit=0 bytes_invalid=0 send_seq=183959 receive_seq=183959 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001366 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31216 bytes_read=98094 bytes_retransmit=0 bytes_invalid=0 send_seq=5177 receive_seq=5177 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999419 sd_pos=2076274 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.16 cputime=761.580 memavail=693828 print_time=5429.914 buffer_time=2.377 print_stall=0 extruder: target=220 temp=220.2 pwm=0.515
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5427.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=8912669 bytes_read=2719228 bytes_retransmit=0 bytes_invalid=0 send_seq=184066 receive_seq=184066 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=49 stalled_bytes=0 freq=180001388 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31222 bytes_read=98110 bytes_retransmit=0 bytes_invalid=0 send_seq=5178 receive_seq=5178 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999435 sd_pos=2077142 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.16 cputime=762.207 memavail=693808 print_time=5431.276 buffer_time=2.352 print_stall=0 extruder: target=220 temp=220.2 pwm=0.515
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5428.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8916879 bytes_read=2720071 bytes_retransmit=0 bytes_invalid=0 send_seq=184147 receive_seq=184146 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=12 stalled_bytes=255 freq=180001444 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31228 bytes_read=98126 bytes_retransmit=0 bytes_invalid=0 send_seq=5179 receive_seq=5179 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999349 sd_pos=2078346 heater_bed: target=60 temp=60.2 pwm=0.109 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.16 cputime=762.435 memavail=693832 print_time=5431.928 buffer_time=2.003 print_stall=0 extruder: target=220 temp=220.3 pwm=0.515
Stats 5429.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8919856 bytes_read=2720781 bytes_retransmit=0 bytes_invalid=0 send_seq=184203 receive_seq=184202 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=1895 freq=180001438 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31234 bytes_read=98142 bytes_retransmit=0 bytes_invalid=0 send_seq=5180 receive_seq=5180 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999129 sd_pos=2081295 heater_bed: target=60 temp=60.1 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.16 cputime=762.677 memavail=694184 print_time=5433.080 buffer_time=2.154 print_stall=0 extruder: target=220 temp=220.2 pwm=0.571
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5430.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8925734 bytes_read=2721706 bytes_retransmit=0 bytes_invalid=0 send_seq=184304 receive_seq=184304 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001431 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31240 bytes_read=98158 bytes_retransmit=0 bytes_invalid=0 send_seq=5181 receive_seq=5181 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999185 sd_pos=2084005 heater_bed: target=60 temp=60.2 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.0 sysload=1.16 cputime=763.036 memavail=694204 print_time=5434.158 buffer_time=2.232 print_stall=0 extruder: target=220 temp=219.8 pwm=0.632
Stats 5431.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8929072 bytes_read=2722453 bytes_retransmit=0 bytes_invalid=0 send_seq=184371 receive_seq=184371 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=0 freq=180001415 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=31246 bytes_read=98187 bytes_retransmit=0 bytes_invalid=0 send_seq=5182 receive_seq=5182 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999211 sd_pos=2086167 heater_bed: target=60 temp=60.2 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=1.15 cputime=763.196 memavail=694204 print_time=5434.982 buffer_time=2.056 print_stall=0 extruder: target=220 temp=219.6 pwm=0.684
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5432.7: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=8933052 bytes_read=2723268 bytes_retransmit=0 bytes_invalid=0 send_seq=184445 receive_seq=184445 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=33 stalled_bytes=0 freq=180001483 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=31252 bytes_read=98203 bytes_retransmit=0 bytes_invalid=0 send_seq=5183 receive_seq=5183 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999236 sd_pos=2088926 heater_bed: target=60 temp=60.1 pwm=0.160 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.15 cputime=763.508 memavail=694476 print_time=5436.102 buffer_time=2.175 print_stall=0 extruder: target=220 temp=219.5 pwm=0.684
Stats 5433.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8937059 bytes_read=2724100 bytes_retransmit=0 bytes_invalid=0 send_seq=184523 receive_seq=184523 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=180001520 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=31258 bytes_read=98219 bytes_retransmit=0 bytes_invalid=0 send_seq=5184 receive_seq=5184 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999032 sd_pos=2091750 heater_bed: target=60 temp=60.2 pwm=0.081 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.15 cputime=763.751 memavail=694476 print_time=5437.144 buffer_time=2.211 print_stall=0 extruder: target=220 temp=219.6 pwm=0.632
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5434.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8939915 bytes_read=2724806 bytes_retransmit=0 bytes_invalid=0 send_seq=184581 receive_seq=184581 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=50 stalled_bytes=0 freq=180001495 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=31264 bytes_read=98235 bytes_retransmit=0 bytes_invalid=0 send_seq=5185 receive_seq=5185 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999002 sd_pos=2093352 heater_bed: target=60 temp=60.1 pwm=0.156 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.15 cputime=764.045 memavail=694476 print_time=5437.965 buffer_time=2.033 print_stall=0 extruder: target=220 temp=219.9 pwm=0.549
Stats 5435.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8943160 bytes_read=2725581 bytes_retransmit=0 bytes_invalid=0 send_seq=184645 receive_seq=184645 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=180001484 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000017 bytes_write=31270 bytes_read=98251 bytes_retransmit=0 bytes_invalid=0 send_seq=5186 receive_seq=5186 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999094 sd_pos=2095434 heater_bed: target=60 temp=60.1 pwm=0.156 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.8 sysload=1.15 cputime=764.222 memavail=693976 print_time=5439.049 buffer_time=2.115 print_stall=0 extruder: target=220 temp=220.2 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5436.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8946798 bytes_read=2726337 bytes_retransmit=0 bytes_invalid=0 send_seq=184716 receive_seq=184716 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=180001468 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31276 bytes_read=98280 bytes_retransmit=0 bytes_invalid=0 send_seq=5187 receive_seq=5187 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999141 sd_pos=2097144 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.3 sysload=1.30 cputime=764.692 memavail=693976 print_time=5440.024 buffer_time=2.090 print_stall=0 extruder: target=220 temp=220.4 pwm=0.549
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5437.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8951611 bytes_read=2727193 bytes_retransmit=0 bytes_invalid=0 send_seq=184804 receive_seq=184804 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001455 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31282 bytes_read=98296 bytes_retransmit=0 bytes_invalid=0 send_seq=5188 receive_seq=5188 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999217 sd_pos=2097770 heater_bed: target=60 temp=60.0 pwm=0.150 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.30 cputime=765.072 memavail=693876 print_time=5441.236 buffer_time=2.301 print_stall=0 extruder: target=220 temp=220.5 pwm=0.495
Stats 5438.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8953576 bytes_read=2727879 bytes_retransmit=0 bytes_invalid=0 send_seq=184848 receive_seq=184848 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001447 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31288 bytes_read=98312 bytes_retransmit=0 bytes_invalid=0 send_seq=5189 receive_seq=5189 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999250 sd_pos=2097910 heater_bed: target=60 temp=60.1 pwm=0.030 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.30 cputime=765.201 memavail=693988 print_time=5441.940 buffer_time=2.004 print_stall=0 extruder: target=220 temp=220.6 pwm=0.495
Stats 5439.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8955790 bytes_read=2728507 bytes_retransmit=0 bytes_invalid=0 send_seq=184896 receive_seq=184896 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001434 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31294 bytes_read=98328 bytes_retransmit=0 bytes_invalid=0 send_seq=5190 receive_seq=5190 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999290 sd_pos=2098321 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.30 cputime=765.360 memavail=693988 print_time=5443.001 buffer_time=2.064 print_stall=0 extruder: target=220 temp=220.4 pwm=0.569
Stats 5440.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8958120 bytes_read=2729185 bytes_retransmit=0 bytes_invalid=0 send_seq=184947 receive_seq=184947 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001419 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31300 bytes_read=98344 bytes_retransmit=0 bytes_invalid=0 send_seq=5191 receive_seq=5191 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999362 sd_pos=2098578 heater_bed: target=60 temp=60.0 pwm=0.187 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.30 cputime=765.494 memavail=693988 print_time=5444.035 buffer_time=2.097 print_stall=0 extruder: target=220 temp=220.2 pwm=0.569
Stats 5441.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8961115 bytes_read=2729929 bytes_retransmit=0 bytes_invalid=0 send_seq=185007 receive_seq=185007 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=48 stalled_bytes=0 freq=180001403 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=31306 bytes_read=98373 bytes_retransmit=0 bytes_invalid=0 send_seq=5192 receive_seq=5192 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999369 sd_pos=2099026 heater_bed: target=60 temp=59.9 pwm=0.187 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=29.0 sysload=1.43 cputime=765.649 memavail=693980 print_time=5445.251 buffer_time=2.312 print_stall=0 extruder: target=220 temp=219.9 pwm=0.631
Stats 5442.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8963054 bytes_read=2730556 bytes_retransmit=0 bytes_invalid=0 send_seq=185050 receive_seq=185050 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001392 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=31312 bytes_read=98389 bytes_retransmit=0 bytes_invalid=0 send_seq=5193 receive_seq=5193 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999370 sd_pos=2099250 heater_bed: target=60 temp=60.0 pwm=0.125 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=1.43 cputime=765.799 memavail=693980 print_time=5446.124 buffer_time=2.185 print_stall=0 extruder: target=220 temp=219.7 pwm=0.631
Stats 5443.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8965320 bytes_read=2731249 bytes_retransmit=0 bytes_invalid=0 send_seq=185100 receive_seq=185100 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001384 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=31318 bytes_read=98405 bytes_retransmit=0 bytes_invalid=0 send_seq=5194 receive_seq=5194 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999666 adj=49999416 sd_pos=2099614 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.43 cputime=765.959 memavail=693980 print_time=5447.038 buffer_time=2.098 print_stall=0 extruder: target=220 temp=219.7 pwm=0.631
Stats 5444.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8968171 bytes_read=2731999 bytes_retransmit=0 bytes_invalid=0 send_seq=185159 receive_seq=185159 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001373 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=31324 bytes_read=98421 bytes_retransmit=0 bytes_invalid=0 send_seq=5195 receive_seq=5195 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999454 sd_pos=2100082 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=41.9 mcu_temp: temp=38.2 chamber: temp=28.9 sysload=1.43 cputime=766.151 memavail=693740 print_time=5448.322 buffer_time=2.382 print_stall=0 extruder: target=220 temp=219.7 pwm=0.631
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5445.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8974595 bytes_read=2732996 bytes_retransmit=0 bytes_invalid=0 send_seq=185276 receive_seq=185276 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=526 freq=180001363 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=31330 bytes_read=98437 bytes_retransmit=0 bytes_invalid=0 send_seq=5196 receive_seq=5196 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999413 sd_pos=2102022 heater_bed: target=60 temp=60.0 pwm=0.124 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.43 cputime=766.840 memavail=693740 print_time=5449.381 buffer_time=2.440 print_stall=0 extruder: target=220 temp=219.8 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5446.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8977350 bytes_read=2733672 bytes_retransmit=0 bytes_invalid=0 send_seq=185328 receive_seq=185328 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=55 stalled_bytes=2133 freq=180001378 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31336 bytes_read=98466 bytes_retransmit=0 bytes_invalid=0 send_seq=5197 receive_seq=5197 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999422 sd_pos=2103336 heater_bed: target=60 temp=59.9 pwm=0.207 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.40 cputime=767.018 memavail=693740 print_time=5450.068 buffer_time=2.126 print_stall=0 extruder: target=220 temp=219.8 pwm=0.598
Stats 5447.7: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=8980888 bytes_read=2734467 bytes_retransmit=0 bytes_invalid=0 send_seq=185396 receive_seq=185396 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=14 stalled_bytes=2887 freq=180001373 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31342 bytes_read=98482 bytes_retransmit=0 bytes_invalid=0 send_seq=5198 receive_seq=5198 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999347 sd_pos=2106206 heater_bed: target=60 temp=59.8 pwm=0.207 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.8 sysload=1.40 cputime=767.251 memavail=694432 print_time=5451.149 buffer_time=2.207 print_stall=0 extruder: target=220 temp=220.0 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5448.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8987247 bytes_read=2735424 bytes_retransmit=0 bytes_invalid=0 send_seq=185504 receive_seq=185504 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31348 bytes_read=98498 bytes_retransmit=0 bytes_invalid=0 send_seq=5199 receive_seq=5199 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999322 sd_pos=2108345 heater_bed: target=60 temp=59.8 pwm=0.207 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.40 cputime=767.552 memavail=694500 print_time=5451.992 buffer_time=2.049 print_stall=0 extruder: target=220 temp=220.0 pwm=0.598
Stats 5449.7: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8991376 bytes_read=2736235 bytes_retransmit=0 bytes_invalid=0 send_seq=185583 receive_seq=185583 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=14 stalled_bytes=0 freq=180001349 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31354 bytes_read=98514 bytes_retransmit=0 bytes_invalid=0 send_seq=5200 receive_seq=5200 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999333 sd_pos=2111207 heater_bed: target=60 temp=59.8 pwm=0.207 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.40 cputime=767.756 memavail=694500 print_time=5453.084 buffer_time=2.141 print_stall=0 extruder: target=220 temp=220.0 pwm=0.598
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5450.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8995284 bytes_read=2737010 bytes_retransmit=0 bytes_invalid=0 send_seq=185659 receive_seq=185647 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=13 stalled_bytes=0 freq=180001346 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31360 bytes_read=98530 bytes_retransmit=0 bytes_invalid=0 send_seq=5201 receive_seq=5201 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999364 sd_pos=2114100 heater_bed: target=60 temp=59.9 pwm=0.129 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=29.1 sysload=1.40 cputime=768.124 memavail=694508 print_time=5454.208 buffer_time=2.253 print_stall=0 extruder: target=220 temp=220.2 pwm=0.561
Stats 5451.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=8998685 bytes_read=2737811 bytes_retransmit=0 bytes_invalid=0 send_seq=185727 receive_seq=185727 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31366 bytes_read=98559 bytes_retransmit=0 bytes_invalid=0 send_seq=5202 receive_seq=5202 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999353 sd_pos=2116410 heater_bed: target=60 temp=59.8 pwm=0.207 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.29 cputime=768.340 memavail=694508 print_time=5455.057 buffer_time=2.102 print_stall=0 extruder: target=220 temp=220.2 pwm=0.561
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5452.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9002057 bytes_read=2738563 bytes_retransmit=0 bytes_invalid=0 send_seq=185792 receive_seq=185792 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=56 stalled_bytes=0 freq=180001335 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31372 bytes_read=98575 bytes_retransmit=0 bytes_invalid=0 send_seq=5203 receive_seq=5203 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999359 sd_pos=2118624 heater_bed: target=60 temp=59.8 pwm=0.144 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.29 cputime=768.621 memavail=694508 print_time=5456.146 buffer_time=2.190 print_stall=0 extruder: target=220 temp=220.2 pwm=0.561
Stats 5453.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9005282 bytes_read=2739348 bytes_retransmit=0 bytes_invalid=0 send_seq=185857 receive_seq=185857 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001329 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31378 bytes_read=98591 bytes_retransmit=0 bytes_invalid=0 send_seq=5204 receive_seq=5204 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999343 sd_pos=2120637 heater_bed: target=60 temp=59.8 pwm=0.216 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.29 cputime=768.844 memavail=694260 print_time=5457.173 buffer_time=2.215 print_stall=0 extruder: target=220 temp=220.1 pwm=0.561
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5454.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9009382 bytes_read=2740160 bytes_retransmit=0 bytes_invalid=0 send_seq=185937 receive_seq=185937 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31384 bytes_read=98607 bytes_retransmit=0 bytes_invalid=0 send_seq=5205 receive_seq=5205 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999343 sd_pos=2122135 heater_bed: target=60 temp=59.9 pwm=0.123 raspberry_pi: temp=42.4 mcu_temp: temp=38.5 chamber: temp=28.9 sysload=1.29 cputime=769.184 memavail=694260 print_time=5458.347 buffer_time=2.389 print_stall=0 extruder: target=220 temp=220.1 pwm=0.582
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5455.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9013418 bytes_read=2740975 bytes_retransmit=0 bytes_invalid=0 send_seq=186014 receive_seq=186014 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=18 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31390 bytes_read=98623 bytes_retransmit=0 bytes_invalid=0 send_seq=5206 receive_seq=5206 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999256 sd_pos=2122576 heater_bed: target=60 temp=59.8 pwm=0.180 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=28.9 sysload=1.29 cputime=769.429 memavail=694264 print_time=5459.499 buffer_time=2.540 print_stall=0 extruder: target=220 temp=220.1 pwm=0.582
Stats 5456.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9015343 bytes_read=2741620 bytes_retransmit=0 bytes_invalid=0 send_seq=186057 receive_seq=186057 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31396 bytes_read=98652 bytes_retransmit=0 bytes_invalid=0 send_seq=5207 receive_seq=5207 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999285 sd_pos=2122746 heater_bed: target=60 temp=59.9 pwm=0.066 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.18 cputime=769.589 memavail=694144 print_time=5460.204 buffer_time=2.244 print_stall=0 extruder: target=220 temp=220.0 pwm=0.582
Stats 5457.8: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9017552 bytes_read=2742277 bytes_retransmit=0 bytes_invalid=0 send_seq=186106 receive_seq=186106 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31402 bytes_read=98668 bytes_retransmit=0 bytes_invalid=0 send_seq=5208 receive_seq=5208 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999336 sd_pos=2123216 heater_bed: target=60 temp=59.9 pwm=0.082 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.18 cputime=769.761 memavail=694120 print_time=5461.263 buffer_time=2.303 print_stall=0 extruder: target=220 temp=220.0 pwm=0.582
Stats 5458.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9019796 bytes_read=2742968 bytes_retransmit=0 bytes_invalid=0 send_seq=186155 receive_seq=186155 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31408 bytes_read=98684 bytes_retransmit=0 bytes_invalid=0 send_seq=5209 receive_seq=5209 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999394 sd_pos=2123444 heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=1.18 cputime=769.921 memavail=693016 print_time=5462.296 buffer_time=2.335 print_stall=0 extruder: target=220 temp=219.9 pwm=0.593
Stats 5459.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9021917 bytes_read=2743639 bytes_retransmit=0 bytes_invalid=0 send_seq=186201 receive_seq=186201 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=55 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31414 bytes_read=98700 bytes_retransmit=0 bytes_invalid=0 send_seq=5210 receive_seq=5210 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999412 sd_pos=2123637 heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.18 cputime=770.052 memavail=693184 print_time=5462.969 buffer_time=2.008 print_stall=0 extruder: target=220 temp=220.0 pwm=0.593
Stats 5460.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9024626 bytes_read=2744281 bytes_retransmit=0 bytes_invalid=0 send_seq=186256 receive_seq=186247 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=32 stalled_bytes=0 freq=180001302 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31420 bytes_read=98716 bytes_retransmit=0 bytes_invalid=0 send_seq=5211 receive_seq=5211 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999428 sd_pos=2124095 heater_bed: target=60 temp=59.9 pwm=0.135 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.18 cputime=770.230 memavail=693264 print_time=5464.382 buffer_time=2.404 print_stall=0 extruder: target=220 temp=220.0 pwm=0.593
Stats 5461.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9026844 bytes_read=2745011 bytes_retransmit=0 bytes_invalid=0 send_seq=186304 receive_seq=186304 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31426 bytes_read=98745 bytes_retransmit=0 bytes_invalid=0 send_seq=5212 receive_seq=5212 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999406 sd_pos=2124456 heater_bed: target=60 temp=60.0 pwm=0.118 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.09 cputime=770.386 memavail=693264 print_time=5465.296 buffer_time=2.317 print_stall=0 extruder: target=220 temp=220.1 pwm=0.536
Stats 5462.8: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9028536 bytes_read=2745627 bytes_retransmit=0 bytes_invalid=0 send_seq=186344 receive_seq=186344 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31432 bytes_read=98760 bytes_retransmit=0 bytes_invalid=0 send_seq=5213 receive_seq=5213 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999430 sd_pos=2124733 heater_bed: target=60 temp=59.9 pwm=0.199 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.09 cputime=770.554 memavail=693160 print_time=5465.985 buffer_time=2.006 print_stall=0 extruder: target=220 temp=220.2 pwm=0.536
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
Stats 5463.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9035212 bytes_read=2746651 bytes_retransmit=0 bytes_invalid=0 send_seq=186466 receive_seq=186466 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=23 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31438 bytes_read=98775 bytes_retransmit=0 bytes_invalid=0 send_seq=5214 receive_seq=5214 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999417 sd_pos=2126251 heater_bed: target=60 temp=60.0 pwm=0.179 raspberry_pi: temp=41.9 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=1.09 cputime=771.074 memavail=693276 print_time=5467.462 buffer_time=2.482 print_stall=0 extruder: target=220 temp=220.1 pwm=0.536
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5464.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9038335 bytes_read=2747421 bytes_retransmit=0 bytes_invalid=0 send_seq=186529 receive_seq=186529 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001289 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31444 bytes_read=98790 bytes_retransmit=0 bytes_invalid=0 send_seq=5215 receive_seq=5215 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999412 sd_pos=2126959 heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.09 cputime=771.247 memavail=693276 print_time=5468.023 buffer_time=2.042 print_stall=0 extruder: target=220 temp=220.0 pwm=0.586
Stats 5465.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9041370 bytes_read=2748152 bytes_retransmit=0 bytes_invalid=0 send_seq=186590 receive_seq=186590 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=30 stalled_bytes=1114 freq=180001280 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=31456 bytes_read=98820 bytes_retransmit=0 bytes_invalid=0 send_seq=5217 receive_seq=5217 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999422 sd_pos=2129996 heater_bed: target=60 temp=60.0 pwm=0.107 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.09 cputime=771.476 memavail=693288 print_time=5469.138 buffer_time=2.157 print_stall=0 extruder: target=220 temp=219.7 pwm=0.655
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5466.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9046582 bytes_read=2748958 bytes_retransmit=0 bytes_invalid=0 send_seq=186680 receive_seq=186671 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001282 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31462 bytes_read=98848 bytes_retransmit=0 bytes_invalid=0 send_seq=5218 receive_seq=5218 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999446 sd_pos=2132675 heater_bed: target=60 temp=60.0 pwm=0.169 raspberry_pi: temp=41.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.08 cputime=771.821 memavail=693288 print_time=5470.219 buffer_time=2.222 print_stall=0 extruder: target=220 temp=219.6 pwm=0.655
Stats 5467.8: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9049863 bytes_read=2749784 bytes_retransmit=0 bytes_invalid=0 send_seq=186745 receive_seq=186745 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001278 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31468 bytes_read=98864 bytes_retransmit=0 bytes_invalid=0 send_seq=5219 receive_seq=5219 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999411 sd_pos=2134948 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.08 cputime=772.006 memavail=693240 print_time=5471.031 buffer_time=2.034 print_stall=0 extruder: target=220 temp=219.5 pwm=0.655
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5468.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9053674 bytes_read=2750575 bytes_retransmit=0 bytes_invalid=0 send_seq=186817 receive_seq=186817 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31474 bytes_read=98880 bytes_retransmit=0 bytes_invalid=0 send_seq=5220 receive_seq=5220 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999389 sd_pos=2137841 heater_bed: target=60 temp=60.1 pwm=0.109 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.08 cputime=772.324 memavail=693032 print_time=5472.144 buffer_time=2.146 print_stall=0 extruder: target=220 temp=219.5 pwm=0.655
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5469.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9057912 bytes_read=2751441 bytes_retransmit=0 bytes_invalid=0 send_seq=186900 receive_seq=186899 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001279 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31480 bytes_read=98896 bytes_retransmit=0 bytes_invalid=0 send_seq=5221 receive_seq=5221 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999370 sd_pos=2140838 heater_bed: target=60 temp=60.1 pwm=0.048 raspberry_pi: temp=42.4 mcu_temp: temp=38.5 chamber: temp=29.0 sysload=1.08 cputime=772.716 memavail=693032 print_time=5473.241 buffer_time=2.125 print_stall=0 extruder: target=220 temp=219.7 pwm=0.600
Stats 5470.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9061111 bytes_read=2752176 bytes_retransmit=0 bytes_invalid=0 send_seq=186963 receive_seq=186963 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=22 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31486 bytes_read=98912 bytes_retransmit=0 bytes_invalid=0 send_seq=5222 receive_seq=5222 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999336 sd_pos=2142821 heater_bed: target=60 temp=60.1 pwm=0.154 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.7 sysload=1.08 cputime=772.866 memavail=693128 print_time=5474.322 buffer_time=2.206 print_stall=0 extruder: target=220 temp=220.0 pwm=0.600
Stats 5471.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9063932 bytes_read=2752878 bytes_retransmit=0 bytes_invalid=0 send_seq=187021 receive_seq=187021 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=31492 bytes_read=98941 bytes_retransmit=0 bytes_invalid=0 send_seq=5223 receive_seq=5223 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999325 sd_pos=2144736 heater_bed: target=60 temp=60.1 pwm=0.100 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.16 cputime=773.077 memavail=693288 print_time=5475.308 buffer_time=2.190 print_stall=0 extruder: target=220 temp=220.2 pwm=0.525
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5472.9: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9066450 bytes_read=2753583 bytes_retransmit=0 bytes_invalid=0 send_seq=187073 receive_seq=187073 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=31498 bytes_read=98957 bytes_retransmit=0 bytes_invalid=0 send_seq=5224 receive_seq=5224 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999324 sd_pos=2145735 heater_bed: target=60 temp=60.1 pwm=0.100 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=28.8 sysload=1.16 cputime=773.372 memavail=693288 print_time=5476.364 buffer_time=2.246 print_stall=0 extruder: target=220 temp=220.3 pwm=0.525
Stats 5473.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9069304 bytes_read=2754315 bytes_retransmit=0 bytes_invalid=0 send_seq=187131 receive_seq=187131 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=31504 bytes_read=98973 bytes_retransmit=0 bytes_invalid=0 send_seq=5225 receive_seq=5225 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999290 sd_pos=2146017 heater_bed: target=60 temp=60.1 pwm=0.100 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=28.7 sysload=1.16 cputime=773.515 memavail=692884 print_time=5477.583 buffer_time=2.464 print_stall=0 extruder: target=220 temp=220.4 pwm=0.525
Stats 5474.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9071420 bytes_read=2754951 bytes_retransmit=0 bytes_invalid=0 send_seq=187178 receive_seq=187178 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=31510 bytes_read=98989 bytes_retransmit=0 bytes_invalid=0 send_seq=5226 receive_seq=5226 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999306 sd_pos=2146429 heater_bed: target=60 temp=60.1 pwm=0.092 raspberry_pi: temp=41.9 mcu_temp: temp=38.4 chamber: temp=28.7 sysload=1.16 cputime=773.682 memavail=693048 print_time=5478.545 buffer_time=2.425 print_stall=0 extruder: target=220 temp=220.3 pwm=0.525
Stats 5475.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9073569 bytes_read=2755647 bytes_retransmit=0 bytes_invalid=0 send_seq=187226 receive_seq=187226 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000017 bytes_write=31516 bytes_read=99005 bytes_retransmit=0 bytes_invalid=0 send_seq=5227 receive_seq=5227 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999665 adj=49999302 sd_pos=2146573 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=41.9 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=1.16 cputime=773.800 memavail=693048 print_time=5479.379 buffer_time=2.258 print_stall=0 extruder: target=220 temp=220.3 pwm=0.564
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5476.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9077481 bytes_read=2756437 bytes_retransmit=0 bytes_invalid=0 send_seq=187301 receive_seq=187301 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31522 bytes_read=99034 bytes_retransmit=0 bytes_invalid=0 send_seq=5228 receive_seq=5228 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999663 adj=49999281 sd_pos=2146960 heater_bed: target=60 temp=60.1 pwm=0.122 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=1.06 cputime=774.054 memavail=693244 print_time=5480.407 buffer_time=2.285 print_stall=0 extruder: target=220 temp=220.1 pwm=0.564
Stats 5477.9: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9079795 bytes_read=2757109 bytes_retransmit=0 bytes_invalid=0 send_seq=187353 receive_seq=187353 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31528 bytes_read=99050 bytes_retransmit=0 bytes_invalid=0 send_seq=5229 receive_seq=5229 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999273 sd_pos=2147334 heater_bed: target=60 temp=60.2 pwm=0.054 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=1.06 cputime=774.219 memavail=693560 print_time=5481.483 buffer_time=2.361 print_stall=0 extruder: target=220 temp=219.9 pwm=0.637
Stats 5478.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9081512 bytes_read=2757786 bytes_retransmit=0 bytes_invalid=0 send_seq=187394 receive_seq=187394 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001317 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31534 bytes_read=99066 bytes_retransmit=0 bytes_invalid=0 send_seq=5230 receive_seq=5230 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999321 sd_pos=2147561 heater_bed: target=60 temp=60.0 pwm=0.192 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.06 cputime=774.374 memavail=693560 print_time=5482.174 buffer_time=2.051 print_stall=0 extruder: target=220 temp=219.7 pwm=0.637
Stats 5479.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9084281 bytes_read=2758486 bytes_retransmit=0 bytes_invalid=0 send_seq=187451 receive_seq=187451 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=0 freq=180001314 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31540 bytes_read=99082 bytes_retransmit=0 bytes_invalid=0 send_seq=5231 receive_seq=5231 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999340 sd_pos=2148144 heater_bed: target=60 temp=60.0 pwm=0.192 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=28.8 sysload=1.06 cputime=774.555 memavail=693456 print_time=5483.507 buffer_time=2.384 print_stall=0 extruder: target=220 temp=219.7 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5481.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9091896 bytes_read=2759646 bytes_retransmit=0 bytes_invalid=0 send_seq=187590 receive_seq=187589 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=304 freq=180001311 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000013 bytes_write=31546 bytes_read=99098 bytes_retransmit=0 bytes_invalid=0 send_seq=5232 receive_seq=5232 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999673 adj=49999346 sd_pos=2149726 heater_bed: target=60 temp=59.9 pwm=0.196 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=1.06 cputime=775.002 memavail=693564 print_time=5485.102 buffer_time=2.688 print_stall=0 extruder: target=220 temp=219.7 pwm=0.637
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5482.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9093493 bytes_read=2760292 bytes_retransmit=0 bytes_invalid=0 send_seq=187627 receive_seq=187627 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=17 stalled_bytes=4202 freq=180001304 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31552 bytes_read=99127 bytes_retransmit=0 bytes_invalid=0 send_seq=5233 receive_seq=5233 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999671 adj=49999341 sd_pos=2151533 heater_bed: target=60 temp=60.0 pwm=0.134 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=1.06 cputime=775.300 memavail=693564 print_time=5485.919 buffer_time=2.504 print_stall=0 extruder: target=220 temp=219.8 pwm=0.604
Stats 5483.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=9096427 bytes_read=2760983 bytes_retransmit=0 bytes_invalid=0 send_seq=187680 receive_seq=187680 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=3355 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31558 bytes_read=99143 bytes_retransmit=0 bytes_invalid=0 send_seq=5234 receive_seq=5234 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999337 sd_pos=2153004 heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.06 cputime=775.463 memavail=693576 print_time=5486.451 buffer_time=2.035 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
Stats 5484.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9103903 bytes_read=2762030 bytes_retransmit=0 bytes_invalid=0 send_seq=187806 receive_seq=187806 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=53 stalled_bytes=0 freq=180001449 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31564 bytes_read=99159 bytes_retransmit=0 bytes_invalid=0 send_seq=5235 receive_seq=5235 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999080 sd_pos=2155900 heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.06 cputime=775.701 memavail=693576 print_time=5487.504 buffer_time=2.088 print_stall=0 extruder: target=220 temp=220.0 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5485.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9107528 bytes_read=2762834 bytes_retransmit=0 bytes_invalid=0 send_seq=187876 receive_seq=187875 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001437 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31570 bytes_read=99175 bytes_retransmit=0 bytes_invalid=0 send_seq=5236 receive_seq=5236 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49998770 sd_pos=2158296 heater_bed: target=60 temp=60.0 pwm=0.144 raspberry_pi: temp=41.9 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=1.06 cputime=776.046 memavail=693576 print_time=5488.427 buffer_time=2.002 print_stall=0 extruder: target=220 temp=220.2 pwm=0.551
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5486.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9111680 bytes_read=2763625 bytes_retransmit=0 bytes_invalid=0 send_seq=187954 receive_seq=187953 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001483 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000015 bytes_write=31576 bytes_read=99191 bytes_retransmit=0 bytes_invalid=0 send_seq=5237 receive_seq=5237 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49998861 sd_pos=2161436 heater_bed: target=60 temp=59.9 pwm=0.163 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=0.97 cputime=776.416 memavail=693576 print_time=5489.514 buffer_time=2.088 print_stall=0 extruder: target=220 temp=220.1 pwm=0.551
Stats 5487.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9115898 bytes_read=2764443 bytes_retransmit=0 bytes_invalid=0 send_seq=188035 receive_seq=188034 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001467 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=31582 bytes_read=99220 bytes_retransmit=0 bytes_invalid=0 send_seq=5238 receive_seq=5238 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49998777 sd_pos=2164426 heater_bed: target=60 temp=59.9 pwm=0.156 raspberry_pi: temp=41.9 mcu_temp: temp=38.1 chamber: temp=28.8 sysload=0.97 cputime=776.627 memavail=693576 print_time=5490.630 buffer_time=2.200 print_stall=0 extruder: target=220 temp=220.0 pwm=0.636
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5488.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9119082 bytes_read=2765199 bytes_retransmit=0 bytes_invalid=0 send_seq=188098 receive_seq=188098 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001455 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=31588 bytes_read=99236 bytes_retransmit=0 bytes_invalid=0 send_seq=5239 receive_seq=5239 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49998930 sd_pos=2166431 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.7 sysload=0.97 cputime=776.946 memavail=693588 print_time=5491.485 buffer_time=2.053 print_stall=0 extruder: target=220 temp=219.9 pwm=0.636
Stats 5489.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9121709 bytes_read=2765902 bytes_retransmit=0 bytes_invalid=0 send_seq=188153 receive_seq=188153 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=29 stalled_bytes=0 freq=180001437 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=31594 bytes_read=99252 bytes_retransmit=0 bytes_invalid=0 send_seq=5240 receive_seq=5240 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999019 sd_pos=2168523 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.8 sysload=0.97 cputime=777.116 memavail=693596 print_time=5492.492 buffer_time=2.060 print_stall=0 extruder: target=220 temp=219.9 pwm=0.636
Stats 5490.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9124461 bytes_read=2766593 bytes_retransmit=0 bytes_invalid=0 send_seq=188208 receive_seq=188208 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=51 stalled_bytes=0 freq=180001424 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=31600 bytes_read=99268 bytes_retransmit=0 bytes_invalid=0 send_seq=5241 receive_seq=5241 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999098 sd_pos=2170331 heater_bed: target=60 temp=59.9 pwm=0.140 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=0.97 cputime=777.316 memavail=693588 print_time=5493.546 buffer_time=2.113 print_stall=0 extruder: target=220 temp=219.9 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5491.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9127164 bytes_read=2767328 bytes_retransmit=0 bytes_invalid=0 send_seq=188264 receive_seq=188264 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001493 rpi: mcu_awake=0.000 mcu_task_avg=0.000007 mcu_task_stddev=0.000010 bytes_write=31606 bytes_read=99284 bytes_retransmit=0 bytes_invalid=0 send_seq=5242 receive_seq=5242 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999158 sd_pos=2170753 heater_bed: target=60 temp=60.0 pwm=0.140 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=0.89 cputime=777.587 memavail=693588 print_time=5494.527 buffer_time=2.093 print_stall=0 extruder: target=220 temp=220.2 pwm=0.548
Stats 5492.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9129426 bytes_read=2767969 bytes_retransmit=0 bytes_invalid=0 send_seq=188312 receive_seq=188312 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001477 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31612 bytes_read=99313 bytes_retransmit=0 bytes_invalid=0 send_seq=5243 receive_seq=5243 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49998908 sd_pos=2171061 heater_bed: target=60 temp=60.0 pwm=0.082 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.6 sysload=0.89 cputime=777.712 memavail=693592 print_time=5495.500 buffer_time=2.067 print_stall=0 extruder: target=220 temp=220.3 pwm=0.548
Stats 5493.2: gcodein=0  mcu: mcu_awake=0.013 mcu_task_avg=0.000012 mcu_task_stddev=0.000014 bytes_write=9131573 bytes_read=2768631 bytes_retransmit=0 bytes_invalid=0 send_seq=188359 receive_seq=188359 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001459 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31618 bytes_read=99329 bytes_retransmit=0 bytes_invalid=0 send_seq=5244 receive_seq=5244 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49998998 sd_pos=2171447 heater_bed: target=60 temp=60.0 pwm=0.082 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=0.89 cputime=777.848 memavail=693592 print_time=5496.463 buffer_time=2.028 print_stall=0 extruder: target=220 temp=220.3 pwm=0.548
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5494.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9136544 bytes_read=2769501 bytes_retransmit=0 bytes_invalid=0 send_seq=188453 receive_seq=188441 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=940 stalled_bytes=0 freq=180001447 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31624 bytes_read=99345 bytes_retransmit=0 bytes_invalid=0 send_seq=5245 receive_seq=5245 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999071 sd_pos=2172039 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=0.89 cputime=778.229 memavail=693592 print_time=5498.327 buffer_time=2.854 print_stall=0 extruder: target=220 temp=220.3 pwm=0.548
Stats 5495.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9139153 bytes_read=2770253 bytes_retransmit=0 bytes_invalid=0 send_seq=188509 receive_seq=188509 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001430 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31630 bytes_read=99361 bytes_retransmit=0 bytes_invalid=0 send_seq=5246 receive_seq=5246 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999214 sd_pos=2172324 heater_bed: target=60 temp=60.1 pwm=0.072 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=28.7 sysload=0.89 cputime=778.348 memavail=693600 print_time=5498.959 buffer_time=2.485 print_stall=0 extruder: target=220 temp=220.1 pwm=0.601
Stats 5496.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9140734 bytes_read=2770899 bytes_retransmit=0 bytes_invalid=0 send_seq=188547 receive_seq=188547 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001413 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31636 bytes_read=99377 bytes_retransmit=0 bytes_invalid=0 send_seq=5247 receive_seq=5247 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999243 sd_pos=2172580 heater_bed: target=60 temp=60.0 pwm=0.155 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=0.90 cputime=778.474 memavail=693600 print_time=5499.819 buffer_time=2.344 print_stall=0 extruder: target=220 temp=220.1 pwm=0.601
Stats 5497.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9142831 bytes_read=2771544 bytes_retransmit=0 bytes_invalid=0 send_seq=188593 receive_seq=188593 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001398 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31642 bytes_read=99406 bytes_retransmit=0 bytes_invalid=0 send_seq=5248 receive_seq=5248 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999311 sd_pos=2172887 heater_bed: target=60 temp=60.0 pwm=0.142 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=28.7 sysload=0.90 cputime=778.598 memavail=693600 print_time=5500.726 buffer_time=2.250 print_stall=0 extruder: target=220 temp=219.9 pwm=0.601
Stats 5498.3: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9145803 bytes_read=2772271 bytes_retransmit=0 bytes_invalid=0 send_seq=188656 receive_seq=188656 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=8 stalled_bytes=0 freq=180001387 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31648 bytes_read=99422 bytes_retransmit=0 bytes_invalid=0 send_seq=5249 receive_seq=5249 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999343 sd_pos=2173354 heater_bed: target=60 temp=60.0 pwm=0.145 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=0.90 cputime=778.767 memavail=693856 print_time=5502.005 buffer_time=2.529 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5499.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9150386 bytes_read=2773183 bytes_retransmit=0 bytes_invalid=0 send_seq=188744 receive_seq=188744 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0 freq=180001378 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31654 bytes_read=99438 bytes_retransmit=0 bytes_invalid=0 send_seq=5250 receive_seq=5250 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999369 sd_pos=2174459 heater_bed: target=60 temp=60.0 pwm=0.083 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=0.90 cputime=779.157 memavail=693856 print_time=5502.770 buffer_time=2.293 print_stall=0 extruder: target=220 temp=219.8 pwm=0.601
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5500.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9154876 bytes_read=2773978 bytes_retransmit=0 bytes_invalid=0 send_seq=188828 receive_seq=188820 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=45 stalled_bytes=399 freq=180001369 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31660 bytes_read=99454 bytes_retransmit=0 bytes_invalid=0 send_seq=5251 receive_seq=5251 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999408 sd_pos=2176344 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=0.90 cputime=779.458 memavail=693856 print_time=5503.734 buffer_time=2.249 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
Stats 5501.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9158014 bytes_read=2774740 bytes_retransmit=0 bytes_invalid=0 send_seq=188890 receive_seq=188890 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=38 stalled_bytes=480 freq=180001361 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31666 bytes_read=99470 bytes_retransmit=0 bytes_invalid=0 send_seq=5252 receive_seq=5252 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999417 sd_pos=2178645 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=29.0 sysload=0.99 cputime=779.665 memavail=693868 print_time=5504.555 buffer_time=2.069 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5502.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9162403 bytes_read=2775570 bytes_retransmit=0 bytes_invalid=0 send_seq=188967 receive_seq=188967 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001365 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31672 bytes_read=99499 bytes_retransmit=0 bytes_invalid=0 send_seq=5253 receive_seq=5253 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999420 sd_pos=2181566 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=0.99 cputime=780.010 memavail=693868 print_time=5505.642 buffer_time=2.156 print_stall=0 extruder: target=220 temp=219.8 pwm=0.599
Stats 5503.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9166162 bytes_read=2776356 bytes_retransmit=0 bytes_invalid=0 send_seq=189040 receive_seq=189039 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001352 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31678 bytes_read=99515 bytes_retransmit=0 bytes_invalid=0 send_seq=5254 receive_seq=5254 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999648 adj=49999352 sd_pos=2184531 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=0.99 cputime=780.245 memavail=693860 print_time=5506.714 buffer_time=2.210 print_stall=0 extruder: target=220 temp=219.9 pwm=0.599
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5504.3: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9169337 bytes_read=2777098 bytes_retransmit=0 bytes_invalid=0 send_seq=189104 receive_seq=189104 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=28 stalled_bytes=0 freq=180001342 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31684 bytes_read=99531 bytes_retransmit=0 bytes_invalid=0 send_seq=5255 receive_seq=5255 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999364 sd_pos=2186884 heater_bed: target=60 temp=60.0 pwm=0.154 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.9 sysload=0.99 cputime=780.548 memavail=693612 print_time=5507.575 buffer_time=2.070 print_stall=0 extruder: target=220 temp=219.9 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5505.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9173500 bytes_read=2777974 bytes_retransmit=0 bytes_invalid=0 send_seq=189183 receive_seq=189183 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31696 bytes_read=99563 bytes_retransmit=0 bytes_invalid=0 send_seq=5257 receive_seq=5257 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999477 sd_pos=2189918 heater_bed: target=60 temp=59.9 pwm=0.200 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=29.1 sysload=0.99 cputime=780.895 memavail=693612 print_time=5508.700 buffer_time=2.140 print_stall=0 extruder: target=220 temp=220.0 pwm=0.595
Stats 5506.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9176494 bytes_read=2778675 bytes_retransmit=0 bytes_invalid=0 send_seq=189243 receive_seq=189243 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001332 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000012 bytes_write=31702 bytes_read=99579 bytes_retransmit=0 bytes_invalid=0 send_seq=5258 receive_seq=5258 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999463 sd_pos=2191962 heater_bed: target=60 temp=59.9 pwm=0.173 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=0.99 cputime=781.043 memavail=693612 print_time=5509.743 buffer_time=2.182 print_stall=0 extruder: target=220 temp=220.0 pwm=0.595
Stats 5507.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9179214 bytes_read=2779396 bytes_retransmit=0 bytes_invalid=0 send_seq=189299 receive_seq=189299 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31708 bytes_read=99608 bytes_retransmit=0 bytes_invalid=0 send_seq=5259 receive_seq=5259 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999437 sd_pos=2193905 heater_bed: target=60 temp=60.0 pwm=0.173 raspberry_pi: temp=42.9 mcu_temp: temp=38.6 chamber: temp=28.8 sysload=0.99 cputime=781.254 memavail=693620 print_time=5510.753 buffer_time=2.191 print_stall=0 extruder: target=220 temp=219.9 pwm=0.595
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5508.4: gcodein=0  mcu: mcu_awake=0.015 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9181739 bytes_read=2780091 bytes_retransmit=0 bytes_invalid=0 send_seq=189352 receive_seq=189352 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31714 bytes_read=99624 bytes_retransmit=0 bytes_invalid=0 send_seq=5260 receive_seq=5260 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999400 sd_pos=2194843 heater_bed: target=60 temp=60.0 pwm=0.086 raspberry_pi: temp=41.9 mcu_temp: temp=38.5 chamber: temp=28.9 sysload=0.99 cputime=781.577 memavail=693620 print_time=5511.769 buffer_time=2.207 print_stall=0 extruder: target=220 temp=220.1 pwm=0.565
Stats 5509.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9184605 bytes_read=2780814 bytes_retransmit=0 bytes_invalid=0 send_seq=189411 receive_seq=189411 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001322 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31720 bytes_read=99640 bytes_retransmit=0 bytes_invalid=0 send_seq=5261 receive_seq=5261 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999655 adj=49999397 sd_pos=2195181 heater_bed: target=60 temp=59.9 pwm=0.168 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=28.8 sysload=0.99 cputime=781.722 memavail=693620 print_time=5512.976 buffer_time=2.412 print_stall=0 extruder: target=220 temp=220.2 pwm=0.565
Stats 5510.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9186739 bytes_read=2781473 bytes_retransmit=0 bytes_invalid=0 send_seq=189458 receive_seq=189458 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001325 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31726 bytes_read=99656 bytes_retransmit=0 bytes_invalid=0 send_seq=5262 receive_seq=5262 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999390 sd_pos=2195569 heater_bed: target=60 temp=59.9 pwm=0.172 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=0.99 cputime=781.891 memavail=693240 print_time=5513.942 buffer_time=2.378 print_stall=0 extruder: target=220 temp=220.2 pwm=0.565
Stats 5511.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9188706 bytes_read=2782119 bytes_retransmit=0 bytes_invalid=0 send_seq=189502 receive_seq=189502 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=46 stalled_bytes=0 freq=180001320 rpi: mcu_awake=0.000 mcu_task_avg=0.000009 mcu_task_stddev=0.000014 bytes_write=31732 bytes_read=99672 bytes_retransmit=0 bytes_invalid=0 send_seq=5263 receive_seq=5263 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999401 sd_pos=2195737 heater_bed: target=60 temp=60.0 pwm=0.101 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=28.7 sysload=1.07 cputime=782.042 memavail=693372 print_time=5514.775 buffer_time=2.209 print_stall=0 extruder: target=220 temp=220.3 pwm=0.565
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5512.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9193575 bytes_read=2782980 bytes_retransmit=0 bytes_invalid=0 send_seq=189594 receive_seq=189594 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31738 bytes_read=99701 bytes_retransmit=0 bytes_invalid=0 send_seq=5264 receive_seq=5264 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999425 sd_pos=2196505 heater_bed: target=60 temp=60.0 pwm=0.066 raspberry_pi: temp=41.9 mcu_temp: temp=38.5 chamber: temp=28.8 sysload=1.07 cputime=782.483 memavail=693372 print_time=5515.899 buffer_time=2.334 print_stall=0 extruder: target=220 temp=220.2 pwm=0.553
Stats 5513.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9196123 bytes_read=2783696 bytes_retransmit=0 bytes_invalid=0 send_seq=189649 receive_seq=189649 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=24 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31744 bytes_read=99717 bytes_retransmit=0 bytes_invalid=0 send_seq=5265 receive_seq=5265 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999659 adj=49999393 sd_pos=2196823 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.6 sysload=1.07 cputime=782.646 memavail=692952 print_time=5516.996 buffer_time=2.429 print_stall=0 extruder: target=220 temp=220.2 pwm=0.553
Stats 5514.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9197740 bytes_read=2784338 bytes_retransmit=0 bytes_invalid=0 send_seq=189686 receive_seq=189686 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=16 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31750 bytes_read=99733 bytes_retransmit=0 bytes_invalid=0 send_seq=5266 receive_seq=5266 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999406 sd_pos=2197049 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.07 cputime=782.795 memavail=692952 print_time=5517.679 buffer_time=2.111 print_stall=0 extruder: target=220 temp=220.0 pwm=0.553
Stats 5515.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9200542 bytes_read=2785024 bytes_retransmit=0 bytes_invalid=0 send_seq=189743 receive_seq=189743 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001312 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31756 bytes_read=99749 bytes_retransmit=0 bytes_invalid=0 send_seq=5267 receive_seq=5267 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999419 sd_pos=2197547 heater_bed: target=60 temp=60.0 pwm=0.158 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.07 cputime=782.969 memavail=693132 print_time=5519.006 buffer_time=2.437 print_stall=0 extruder: target=220 temp=220.0 pwm=0.631
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5516.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9208083 bytes_read=2786228 bytes_retransmit=0 bytes_invalid=0 send_seq=189881 receive_seq=189881 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=222 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31762 bytes_read=99765 bytes_retransmit=0 bytes_invalid=0 send_seq=5268 receive_seq=5268 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999401 sd_pos=2199335 heater_bed: target=60 temp=60.0 pwm=0.143 raspberry_pi: temp=42.4 mcu_temp: temp=38.5 chamber: temp=28.9 sysload=1.07 cputime=783.531 memavail=693132 print_time=5520.606 buffer_time=2.703 print_stall=0 extruder: target=220 temp=219.7 pwm=0.631
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5517.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9209718 bytes_read=2786849 bytes_retransmit=0 bytes_invalid=0 send_seq=189920 receive_seq=189920 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=57 stalled_bytes=4864 freq=180001309 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31768 bytes_read=99794 bytes_retransmit=0 bytes_invalid=0 send_seq=5269 receive_seq=5269 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999664 adj=49999379 sd_pos=2201226 heater_bed: target=60 temp=60.0 pwm=0.188 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=28.6 sysload=1.07 cputime=783.946 memavail=693132 print_time=5521.482 buffer_time=2.573 print_stall=0 extruder: target=220 temp=219.7 pwm=0.631
Stats 5518.7: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9212753 bytes_read=2787531 bytes_retransmit=0 bytes_invalid=0 send_seq=189975 receive_seq=189974 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=9 stalled_bytes=4300 freq=180001301 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31774 bytes_read=99810 bytes_retransmit=0 bytes_invalid=0 send_seq=5270 receive_seq=5270 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999376 sd_pos=2202803 heater_bed: target=60 temp=59.9 pwm=0.228 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.6 sysload=1.07 cputime=784.130 memavail=693144 print_time=5522.076 buffer_time=2.166 print_stall=0 extruder: target=220 temp=219.7 pwm=0.631
Stats 5519.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9221124 bytes_read=2788702 bytes_retransmit=0 bytes_invalid=0 send_seq=190116 receive_seq=190116 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=54 stalled_bytes=0 freq=180001303 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31780 bytes_read=99826 bytes_retransmit=0 bytes_invalid=0 send_seq=5271 receive_seq=5271 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999662 adj=49999377 sd_pos=2205779 heater_bed: target=60 temp=60.0 pwm=0.132 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.8 sysload=1.07 cputime=784.383 memavail=693144 print_time=5523.140 buffer_time=2.230 print_stall=0 extruder: target=220 temp=219.8 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5520.7: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9224483 bytes_read=2789442 bytes_retransmit=0 bytes_invalid=0 send_seq=190181 receive_seq=190181 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=21 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31786 bytes_read=99842 bytes_retransmit=0 bytes_invalid=0 send_seq=5272 receive_seq=5272 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999355 sd_pos=2208166 heater_bed: target=60 temp=60.1 pwm=0.000 raspberry_pi: temp=42.4 mcu_temp: temp=38.2 chamber: temp=28.8 sysload=1.07 cputime=784.719 memavail=693144 print_time=5524.044 buffer_time=2.133 print_stall=0 extruder: target=220 temp=219.8 pwm=0.613
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5521.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9229034 bytes_read=2790338 bytes_retransmit=0 bytes_invalid=0 send_seq=190270 receive_seq=190269 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=43 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31792 bytes_read=99858 bytes_retransmit=0 bytes_invalid=0 send_seq=5273 receive_seq=5273 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999321 sd_pos=2211334 heater_bed: target=60 temp=60.1 pwm=0.089 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.06 cputime=785.092 memavail=693144 print_time=5525.207 buffer_time=2.206 print_stall=0 extruder: target=220 temp=220.1 pwm=0.536
Stats 5522.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9233024 bytes_read=2791138 bytes_retransmit=0 bytes_invalid=0 send_seq=190347 receive_seq=190346 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001304 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31798 bytes_read=99887 bytes_retransmit=0 bytes_invalid=0 send_seq=5274 receive_seq=5274 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999303 sd_pos=2214420 heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.06 cputime=785.304 memavail=693192 print_time=5526.288 buffer_time=2.256 print_stall=0 extruder: target=220 temp=220.1 pwm=0.536
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 2000.000000
max_accel_to_decel: 1000.000000
square_corner_velocity: 8.000000
Stats 5523.8: gcodein=0  mcu: mcu_awake=0.012 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9235982 bytes_read=2791854 bytes_retransmit=0 bytes_invalid=0 send_seq=190407 receive_seq=190406 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001328 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31804 bytes_read=99903 bytes_retransmit=0 bytes_invalid=0 send_seq=5275 receive_seq=5275 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999296 sd_pos=2216513 heater_bed: target=60 temp=60.1 pwm=0.112 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.06 cputime=785.566 memavail=693256 print_time=5527.147 buffer_time=2.114 print_stall=0 extruder: target=220 temp=220.2 pwm=0.536
Stats 5524.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9238675 bytes_read=2792605 bytes_retransmit=0 bytes_invalid=0 send_seq=190462 receive_seq=190462 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=7 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31810 bytes_read=99919 bytes_retransmit=0 bytes_invalid=0 send_seq=5276 receive_seq=5276 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999660 adj=49999206 sd_pos=2218668 heater_bed: target=60 temp=60.0 pwm=0.166 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.7 sysload=1.06 cputime=785.779 memavail=693256 print_time=5528.160 buffer_time=2.127 print_stall=0 extruder: target=220 temp=220.2 pwm=0.536
Stats 5525.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9241246 bytes_read=2793271 bytes_retransmit=0 bytes_invalid=0 send_seq=190515 receive_seq=190515 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=42 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31816 bytes_read=99935 bytes_retransmit=0 bytes_invalid=0 send_seq=5277 receive_seq=5277 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999658 adj=49999249 sd_pos=2220434 heater_bed: target=60 temp=60.0 pwm=0.170 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.7 sysload=1.06 cputime=785.989 memavail=693288 print_time=5529.185 buffer_time=2.150 print_stall=0 extruder: target=220 temp=220.1 pwm=0.594
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5526.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9243926 bytes_read=2793973 bytes_retransmit=0 bytes_invalid=0 send_seq=190570 receive_seq=190570 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=26 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31822 bytes_read=99951 bytes_retransmit=0 bytes_invalid=0 send_seq=5278 receive_seq=5278 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999656 adj=49999241 sd_pos=2220974 heater_bed: target=60 temp=60.0 pwm=0.111 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.9 sysload=1.14 cputime=786.313 memavail=693288 print_time=5530.198 buffer_time=2.162 print_stall=0 extruder: target=220 temp=219.9 pwm=0.646
Stats 5527.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9246167 bytes_read=2794652 bytes_retransmit=0 bytes_invalid=0 send_seq=190617 receive_seq=190617 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001327 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=31828 bytes_read=99980 bytes_retransmit=0 bytes_invalid=0 send_seq=5279 receive_seq=5279 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999654 adj=49999227 sd_pos=2221314 heater_bed: target=60 temp=60.0 pwm=0.121 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.14 cputime=786.440 memavail=693708 print_time=5531.157 buffer_time=2.121 print_stall=0 extruder: target=220 temp=219.8 pwm=0.646
Stats 5528.8: gcodein=0  mcu: mcu_awake=0.014 mcu_task_avg=0.000012 mcu_task_stddev=0.000015 bytes_write=9248292 bytes_read=2795294 bytes_retransmit=0 bytes_invalid=0 send_seq=190663 receive_seq=190663 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001321 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=31834 bytes_read=99996 bytes_retransmit=0 bytes_invalid=0 send_seq=5280 receive_seq=5280 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999652 adj=49999208 sd_pos=2221726 heater_bed: target=60 temp=60.0 pwm=0.121 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.14 cputime=786.574 memavail=693800 print_time=5532.123 buffer_time=2.086 print_stall=0 extruder: target=220 temp=219.8 pwm=0.646
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
Stats 5530.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9255066 bytes_read=2796395 bytes_retransmit=0 bytes_invalid=0 send_seq=190787 receive_seq=190786 retransmit_seq=0 srtt=0.001 rttvar=0.001 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001310 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=31840 bytes_read=100012 bytes_retransmit=0 bytes_invalid=0 send_seq=5281 receive_seq=5281 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999650 adj=49999213 sd_pos=2222556 heater_bed: target=60 temp=60.0 pwm=0.095 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=28.6 sysload=1.14 cputime=787.043 memavail=693800 print_time=5534.098 buffer_time=2.837 print_stall=0 extruder: target=220 temp=220.0 pwm=0.594
Stats 5531.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9256788 bytes_read=2797045 bytes_retransmit=0 bytes_invalid=0 send_seq=190828 receive_seq=190827 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=25 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000009 mcu_task_stddev=0.000016 bytes_write=31846 bytes_read=100028 bytes_retransmit=0 bytes_invalid=0 send_seq=5282 receive_seq=5282 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999649 adj=49999264 sd_pos=2222843 heater_bed: target=60 temp=60.0 pwm=0.149 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.14 cputime=787.157 memavail=693804 print_time=5534.727 buffer_time=2.465 print_stall=0 extruder: target=220 temp=220.1 pwm=0.540
Stats 5532.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9258394 bytes_read=2797671 bytes_retransmit=0 bytes_invalid=0 send_seq=190867 receive_seq=190867 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=31 stalled_bytes=0 freq=180001296 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31852 bytes_read=100057 bytes_retransmit=0 bytes_invalid=0 send_seq=5283 receive_seq=5283 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999651 adj=49999288 sd_pos=2223069 heater_bed: target=60 temp=59.9 pwm=0.245 raspberry_pi: temp=42.9 mcu_temp: temp=38.3 chamber: temp=28.6 sysload=1.21 cputime=787.306 memavail=693804 print_time=5535.611 buffer_time=2.348 print_stall=0 extruder: target=220 temp=220.3 pwm=0.540
Stats 5533.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000011 mcu_task_stddev=0.000015 bytes_write=9260600 bytes_read=2798323 bytes_retransmit=0 bytes_invalid=0 send_seq=190916 receive_seq=190915 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31864 bytes_read=100089 bytes_retransmit=0 bytes_invalid=0 send_seq=5285 receive_seq=5285 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999653 adj=49999320 sd_pos=2223348 heater_bed: target=60 temp=59.9 pwm=0.121 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.8 sysload=1.21 cputime=787.470 memavail=693804 print_time=5536.505 buffer_time=2.241 print_stall=0 extruder: target=220 temp=220.3 pwm=0.540
Stats 5534.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9263274 bytes_read=2799063 bytes_retransmit=0 bytes_invalid=0 send_seq=190972 receive_seq=190972 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31870 bytes_read=100105 bytes_retransmit=0 bytes_invalid=0 send_seq=5286 receive_seq=5286 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999372 sd_pos=2223765 heater_bed: target=60 temp=59.9 pwm=0.181 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.6 sysload=1.21 cputime=787.650 memavail=693700 print_time=5537.761 buffer_time=2.497 print_stall=0 extruder: target=220 temp=220.2 pwm=0.540
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 10000.000000
max_accel_to_decel: 5000.000000
square_corner_velocity: 8.000000
toolhead: max_velocity: 500.000000
max_accel: 4000.000000
max_accel_to_decel: 2000.000000
square_corner_velocity: 8.000000
MCU 'mcu' shutdown: Timer too close
clocksync state: mcu_freq=180000000 last_clock=996344729139 clock_est=(5504.065 990948403037 180001293.527) min_half_rtt=0.000119 min_rtt_time=4400.646 time_avg=5504.064(911.155) clock_avg=990948403037.379(164009110245.490) pred_variance=177688134.055
Dumping serial stats: bytes_write=9263584 bytes_read=2799552 bytes_retransmit=0 bytes_invalid=0 send_seq=190989 receive_seq=190989 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=10 stalled_bytes=0
Dumping send queue 100 messages
Sent 0 5532.418998 5532.418998 61: seq: 19, queue_step oid=24 interval=103265 count=4 add=12563, queue_step oid=24 interval=163537 count=1 add=0, queue_step oid=24 interval=204948 count=1 add=0, queue_step oid=13 interval=21455 count=48 add=99, queue_step oid=24 interval=325900 count=1 add=0, queue_step oid=16 interval=26564 count=35 add=173, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=764362 count=1 add=0
Sent 1 5532.418998 5532.418998 56: seq: 1a, queue_step oid=13 interval=27839 count=19 add=507, queue_step oid=16 interval=33303 count=18 add=837, queue_step oid=24 interval=668619 count=1 add=0, queue_step oid=13 interval=37956 count=9 add=3698, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=367869 count=2 add=15421, queue_step oid=16 interval=52533 count=9 add=1922
Sent 2 5532.418998 5532.418998 57: seq: 1b, queue_step oid=13 interval=76708 count=3 add=22049, queue_step oid=16 interval=75661 count=4 add=7347, set_next_step_dir oid=13 dir=1, queue_step oid=13 interval=547049 count=1 add=0, queue_step oid=24 interval=188421 count=1 add=0, queue_step oid=16 interval=107337 count=2 add=25434, queue_step oid=24 interval=135668 count=3 add=-17111
Sent 3 5532.418998 5532.418998 58: seq: 1c, queue_step oid=16 interval=201673 count=2 add=31705, queue_step oid=13 interval=89696 count=4 add=-10932, queue_step oid=24 interval=86285 count=8 add=-4281, queue_step oid=13 interval=52828 count=10 add=-2263, queue_step oid=16 interval=304158 count=1 add=0, queue_step oid=24 interval=56050 count=13 add=-1328, set_next_step_dir oid=16 dir=0
Sent 4 5532.418998 5532.418998 59: seq: 1d, queue_step oid=16 interval=40753794 count=1 add=0, queue_step oid=13 interval=33560 count=19 add=-675, queue_step oid=13 interval=22056 count=33 add=-206, queue_step oid=24 interval=39996 count=24 add=-398, queue_step oid=13 interval=15864 count=61 add=-76, queue_step oid=24 interval=31255 count=37 add=-87, queue_step oid=13 interval=11644 count=95 add=-32
Sent 5 5532.420295 5532.420295 58: seq: 1e, queue_step oid=19 interval=13770300 count=1 add=0, queue_step oid=22 interval=13770300 count=1 add=0, queue_step oid=23 interval=13770300 count=1 add=0, queue_step oid=24 interval=28739 count=42 add=78, queue_step oid=13 interval=8978 count=149 add=-11, queue_step oid=24 interval=32634 count=44 add=251, queue_step oid=13 interval=7582 count=184 add=-3
Sent 6 5532.420363 5532.420363 60: seq: 1f, queue_step oid=24 interval=45083 count=39 add=258, queue_step oid=13 interval=7150 count=4288 add=0, queue_step oid=24 interval=53794 count=231 add=0, queue_step oid=19 interval=13541527 count=1 add=0, queue_step oid=22 interval=13541527 count=1 add=0, queue_step oid=23 interval=13541527 count=1 add=0, queue_step oid=24 interval=53831 count=262 add=0
Sent 7 5532.575204 5532.575204 24: seq: 10, queue_digital_out oid=33 clock=3987594624 on_ticks=2171827, queue_step oid=24 interval=54766 count=18 add=446
Sent 8 5532.692216 5532.692216 61: seq: 11, queue_step oid=19 interval=41350747 count=1 add=0, queue_step oid=22 interval=41350747 count=1 add=0, queue_step oid=23 interval=41350747 count=1 add=0, queue_step oid=24 interval=64177 count=11 add=1717, queue_step oid=24 interval=87789 count=5 add=6046, queue_step oid=13 interval=7324 count=160 add=4, queue_step oid=24 interval=126449 count=2 add=23176
Sent 9 5532.692216 5532.692216 61: seq: 12, queue_step oid=24 interval=183136 count=1 add=0, queue_step oid=24 interval=300167 count=1 add=0, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=434580 count=1 add=0, queue_step oid=13 interval=8175 count=126 add=16, queue_step oid=24 interval=308674 count=1 add=0, queue_step oid=24 interval=183829 count=3 add=-29586, queue_step oid=24 interval=115312 count=5 add=-6637
Sent 10 5532.692216 5532.692216 60: seq: 13, queue_step oid=13 interval=10496 count=72 add=44, queue_step oid=24 interval=86406 count=10 add=-1073, queue_step oid=13 interval=14048 count=44 add=113, queue_step oid=24 interval=79457 count=7 add=1664, queue_step oid=13 interval=19666 count=24 add=328, queue_step oid=24 interval=91379 count=4 add=9019, queue_step oid=24 interval=131613 count=2 add=30374
Sent 11 5532.692216 5532.692216 61: seq: 14, queue_step oid=13 interval=30795 count=12 add=1467, queue_step oid=16 interval=370081 count=1 add=0, queue_step oid=24 interval=233063 count=1 add=0, queue_step oid=16 interval=209232 count=1 add=0, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=508564 count=1 add=0, queue_step oid=13 interval=49457 count=5 add=6347, queue_step oid=16 interval=158029 count=4 add=-17461
Sent 12 5532.692216 5532.692216 57: seq: 15, queue_step oid=13 interval=86181 count=2 add=29599, queue_step oid=24 interval=207647 count=1 add=0, set_next_step_dir oid=13 dir=0, queue_step oid=13 interval=488812 count=1 add=0, queue_step oid=16 interval=103572 count=3 add=-16359, queue_step oid=24 interval=131983 count=3 add=-18365, queue_step oid=16 interval=62307 count=11 add=-2152
Sent 13 5532.692216 5532.692216 62: seq: 16, queue_step oid=13 interval=109240 count=3 add=-14999, queue_step oid=24 interval=80817 count=8 add=-3935, queue_step oid=13 interval=65931 count=9 add=-3252, queue_step oid=16 interval=40242 count=26 add=-651, queue_step oid=24 interval=53327 count=14 add=-1095, queue_step oid=13 interval=41162 count=14 add=-1086, queue_step oid=24 interval=39734 count=25 add=-311
Sent 14 5532.692216 5532.692216 59: seq: 17, queue_step oid=13 interval=28194 count=30 add=-290, queue_step oid=16 interval=24930 count=33 add=-224, queue_step oid=13 interval=20483 count=40 add=-137, queue_step oid=16 interval=18318 count=58 add=-78, queue_step oid=24 interval=33092 count=31 add=-26, queue_step oid=13 interval=15958 count=85 add=-51, queue_step oid=16 interval=14221 count=42 add=-16
Sent 15 5532.692216 5532.692216 58: seq: 18, queue_step oid=24 interval=33170 count=31 add=226, queue_step oid=16 interval=13714 count=71 add=-21, queue_step oid=13 interval=12282 count=116 add=-15, queue_step oid=24 interval=40721 count=24 add=470, queue_step oid=16 interval=13159 count=107 add=-3, queue_step oid=13 interval=10913 count=154 add=-3, queue_step oid=24 interval=53032 count=14 add=1264
Sent 16 5532.692216 5532.692216 62: seq: 19, queue_step oid=16 interval=13299 count=84 add=0, queue_step oid=24 interval=73215 count=7 add=3784, queue_step oid=24 interval=101657 count=4 add=12821, queue_step oid=13 interval=10584 count=66 add=0, queue_step oid=16 interval=13753 count=79 add=17, queue_step oid=24 interval=167385 count=1 add=0, queue_step oid=24 interval=220378 count=1 add=0, queue_step oid=13 interval=10960 count=91 add=8
Sent 17 5532.692216 5532.692216 60: seq: 1a, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=832566 count=1 add=0, queue_step oid=16 interval=15751 count=51 add=50, queue_step oid=24 interval=214961 count=1 add=0, queue_step oid=13 interval=12086 count=81 add=42, queue_step oid=24 interval=158578 count=3 add=-16260, queue_step oid=16 interval=18601 count=45 add=157, queue_step oid=24 interval=111619 count=7 add=-3171
Sent 18 5532.692216 5532.692216 61: seq: 1b, queue_step oid=13 interval=15900 count=42 add=140, queue_step oid=24 interval=91559 count=8 add=1213, queue_step oid=16 interval=26639 count=22 add=419, queue_step oid=13 interval=22707 count=22 add=385, queue_step oid=24 interval=107968 count=4 add=9703, queue_step oid=16 interval=37452 count=10 add=1242, queue_step oid=13 interval=34678 count=15 add=1129
Sent 19 5532.692216 5532.692216 62: seq: 1c, queue_step oid=16 interval=57099 count=5 add=8973, queue_step oid=24 interval=175178 count=1 add=0, queue_step oid=24 interval=259870 count=1 add=0, queue_step oid=16 interval=126709 count=1 add=0, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=414574 count=1 add=0, queue_step oid=16 interval=211976 count=1 add=0, queue_step oid=13 interval=53158 count=7 add=3948, set_next_step_dir oid=16 dir=1
Sent 20 5532.693143 5532.693143 64: seq: 1d, queue_step oid=16 interval=248011 count=2 add=-31711, queue_step oid=24 interval=231593 count=1 add=0, queue_step oid=13 interval=86838 count=2 add=14965, queue_step oid=24 interval=137446 count=3 add=-20485, queue_step oid=16 interval=102425 count=2 add=-29897, queue_step oid=13 interval=130463 count=1 add=0, queue_step oid=13 interval=174481 count=2 add=32260
Sent 21 5532.693248 5532.693248 61: seq: 1e, queue_step oid=16 interval=58122 count=10 add=-2583, queue_step oid=24 interval=81993 count=8 add=-4172, queue_step oid=13 interval=285994 count=1 add=0, queue_step oid=16 interval=36054 count=16 add=-787, queue_step oid=24 interval=53370 count=13 add=-1274, queue_step oid=13 interval=3049971 count=1 add=0, queue_step oid=16 interval=25148 count=24 add=-351
Sent 22 5532.693248 5532.693248 57: seq: 1f, queue_step oid=24 interval=39356 count=21 add=-426, queue_step oid=16 interval=17977 count=45 add=-116, queue_step oid=24 interval=31770 count=32 add=-117, queue_step oid=16 interval=13288 count=77 add=-47, queue_step oid=24 interval=28744 count=42 add=59, queue_step oid=16 interval=10044 count=88 add=-21, queue_step oid=16 interval=8482 count=140 add=-9
Sent 23 5532.693248 5532.693248 58: seq: 10, queue_step oid=24 interval=32076 count=37 add=216, queue_step oid=16 interval=7447 count=208 add=-2, queue_step oid=24 interval=41251 count=47 add=287, queue_step oid=16 interval=7150 count=6326 add=0, queue_step oid=24 interval=53572 count=79 add=6, queue_step oid=24 interval=53814 count=1231 add=0, queue_step oid=19 interval=41252396 count=1 add=0
Sent 24 5532.697587 5532.697587 59: seq: 11, queue_step oid=22 interval=41252396 count=1 add=0, queue_step oid=23 interval=41252396 count=1 add=0, queue_step oid=16 interval=7149 count=3729 add=0, queue_step oid=13 interval=94639912 count=1 add=0, queue_step oid=24 interval=53814 count=249 add=0, queue_step oid=16 interval=7150 count=2181 add=0, queue_step oid=24 interval=54754 count=18 add=442
Sent 25 5533.027315 5533.027315 16: seq: 12, buttons_ack oid=25 count=1, queue_step oid=24 interval=64072 count=11 add=1706
Sent 26 5533.059324 5533.059324 6: seq: 13, get_clock
Sent 27 5533.064367 5533.064367 14: seq: 14, tmcuart_send oid=7 write='\xea\x03\xe8\xad\xe1' read=10
Sent 28 5533.075979 5533.075979 8: seq: 15, update_digital_out oid=1 value=0
Sent 29 5533.078923 5533.078923 59: seq: 16, spi_send oid=0 data='\xb0\x15\x02', update_digital_out oid=1 value=1, spi_send oid=0 data='\x00\x18<|<\x80\x80 pxxp', update_digital_out oid=1 value=0, spi_send oid=0 data='\xb1\x15\x02', update_digital_out oid=1 value=1, spi_send oid=0 data='\x0e\x1e\x1e\x0e\x04\x01\x01<><\x18\x00', update_digital_out oid=1 value=0
Sent 30 5533.084183 5533.084183 30: seq: 17, spi_send oid=0 data='\xb2\x10\x01', update_digital_out oid=1 value=1, spi_send oid=0 data='\x88T \x00\x00\x88T \x00\x00\x88T '
Sent 31 5533.093492 5533.093492 14: seq: 18, tmcuart_send oid=7 write='\xea\x03( \xc3' read=10
Sent 32 5533.101121 5533.101121 14: seq: 19, tmcuart_send oid=8 write='\xea\x03\xe8\xad\xe1' read=10
Sent 33 5533.107639 5533.107639 14: seq: 1a, tmcuart_send oid=9 write='\xea\x03\xe8\xad\xe1' read=10
Sent 34 5533.113877 5533.113877 14: seq: 1b, tmcuart_send oid=5 write='\xea\x03\xe8\xad\xe1' read=10
Sent 35 5533.120333 5533.120333 14: seq: 1c, tmcuart_send oid=6 write='\xea\x03\xe8\xad\xe1' read=10
Sent 36 5533.126484 5533.126484 14: seq: 1d, tmcuart_send oid=10 write='\xea\x03\xe8\xad\xe1' read=10
Sent 37 5533.133055 5533.133055 14: seq: 1e, tmcuart_send oid=8 write='\xea\x03( \xc3' read=10
Sent 38 5533.139927 5533.139927 14: seq: 1f, tmcuart_send oid=9 write='\xea\x03( \xc3' read=10
Sent 39 5533.146432 5533.146432 14: seq: 10, tmcuart_send oid=5 write='\xea\x03( \xc3' read=10
Sent 40 5533.153045 5533.153045 14: seq: 11, tmcuart_send oid=6 write='\xea\x03( \xc3' read=10
Sent 41 5533.159513 5533.159513 14: seq: 12, tmcuart_send oid=10 write='\xea\x03( \xc3' read=10
Sent 42 5533.325372 5533.325372 62: seq: 13, set_next_step_dir oid=19 dir=1, queue_step oid=19 interval=84083268 count=1 add=0, set_next_step_dir oid=22 dir=1, queue_step oid=22 interval=84083268 count=1 add=0, set_next_step_dir oid=23 dir=1, queue_step oid=23 interval=84083268 count=1 add=0, queue_step oid=24 interval=87260 count=5 add=6011, queue_step oid=16 interval=7346 count=155 add=4, queue_step oid=24 interval=123316 count=3 add=25474
Sent 43 5533.325372 5533.325372 60: seq: 14, queue_step oid=24 interval=280953 count=1 add=0, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=520886 count=1 add=0, queue_step oid=16 interval=8176 count=126 add=16, queue_step oid=24 interval=284981 count=1 add=0, queue_step oid=24 interval=178995 count=3 add=-26935, queue_step oid=24 interval=115869 count=5 add=-5776, queue_step oid=16 interval=10498 count=72 add=44
Sent 44 5533.325372 5533.325372 61: seq: 15, queue_step oid=24 interval=89206 count=10 add=-502, queue_step oid=16 interval=14037 count=44 add=114, queue_step oid=24 interval=89415 count=6 add=3273, queue_step oid=16 interval=19582 count=19 add=339, queue_step oid=24 interval=119776 count=3 add=19144, queue_step oid=16 interval=28229 count=18 add=716, queue_step oid=13 interval=208699 count=1 add=0
Sent 45 5533.325372 5533.325372 64: seq: 16, queue_step oid=24 interval=235986 count=1 add=0, queue_step oid=13 interval=146687 count=3 add=-18655, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=532428 count=1 add=0, queue_step oid=16 interval=41743 count=9 add=2492, queue_step oid=13 interval=93874 count=8 add=-4960, queue_step oid=24 interval=205531 count=1 add=0, queue_step oid=24 interval=131481 count=3 add=-18255
Sent 46 5533.325372 5533.325372 62: seq: 17, queue_step oid=16 interval=70965 count=2 add=0, queue_step oid=16 interval=119982 count=3 add=27644, queue_step oid=13 interval=43536 count=17 add=-985, queue_step oid=24 interval=80548 count=8 add=-3959, queue_step oid=16 interval=234116 count=1 add=0, queue_step oid=13 interval=28310 count=36 add=-321, set_next_step_dir oid=16 dir=0, queue_step oid=16 interval=1010629 count=1 add=0
Sent 47 5533.325372 5533.325372 59: seq: 18, queue_step oid=24 interval=52346 count=14 add=-1122, queue_step oid=24 interval=38114 count=26 add=-325, queue_step oid=13 interval=17531 count=52 add=-101, queue_step oid=16 interval=397543 count=1 add=0, queue_step oid=16 interval=289793 count=1 add=0, queue_step oid=24 interval=30656 count=36 add=-62, queue_step oid=13 interval=12694 count=89 add=-39
Sent 48 5533.325372 5533.325372 60: seq: 19, queue_step oid=16 interval=138720 count=9 add=-3627, queue_step oid=13 interval=9503 count=124 add=-14, queue_step oid=24 interval=29155 count=39 add=104, queue_step oid=16 interval=91153 count=2 add=-13443, queue_step oid=16 interval=72291 count=16 add=-689, queue_step oid=13 interval=7968 count=114 add=-6, queue_step oid=24 interval=33884 count=46 add=270
Sent 49 5533.325372 5533.325372 58: seq: 1a, queue_step oid=16 interval=56750 count=8 add=-1937, queue_step oid=16 interval=46555 count=22 add=-94, queue_step oid=13 interval=7488 count=165 add=-2, queue_step oid=16 interval=37758 count=22 add=0, queue_step oid=24 interval=46757 count=27 add=391, queue_step oid=13 interval=7310 count=177 add=0, queue_step oid=16 interval=33266 count=33 add=-89
Sent 50 5533.325372 5533.325372 58: seq: 1b, queue_step oid=13 interval=7401 count=210 add=0, queue_step oid=24 interval=58800 count=13 add=925, queue_step oid=16 interval=31843 count=13 add=-492, queue_step oid=16 interval=28428 count=30 add=-140, queue_step oid=24 interval=71453 count=8 add=3328, queue_step oid=16 interval=25520 count=35 add=-15, queue_step oid=13 interval=7571 count=164 add=5
Sent 51 5533.325372 5533.325372 59: seq: 1c, queue_step oid=24 interval=101136 count=4 add=12429, queue_step oid=24 interval=175591 count=1 add=0, queue_step oid=24 interval=252502 count=1 add=0, queue_step oid=16 interval=23384 count=28 add=0, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=623044 count=1 add=0, queue_step oid=13 interval=8651 count=103 add=17, queue_step oid=16 interval=25132 count=31 add=55
Sent 52 5533.325372 5533.325372 60: seq: 1d, queue_step oid=24 interval=260381 count=1 add=0, queue_step oid=24 interval=175955 count=3 add=-24109, queue_step oid=13 interval=10955 count=65 add=37, queue_step oid=24 interval=121332 count=5 add=-5346, queue_step oid=16 interval=23051 count=37 add=261, queue_step oid=24 interval=97938 count=8 add=598, queue_step oid=13 interval=13706 count=35 add=101
Sent 53 5533.325372 5533.325372 60: seq: 1e, queue_step oid=16 interval=33721 count=11 add=-223, queue_step oid=13 interval=17451 count=33 add=194, queue_step oid=24 interval=109665 count=4 add=8436, queue_step oid=16 interval=33968 count=15 add=748, queue_step oid=24 interval=165239 count=1 add=0, queue_step oid=16 interval=46413 count=4 add=-2554, queue_step oid=13 interval=26504 count=23 add=743
Sent 54 5533.326005 5533.326005 62: seq: 1f, queue_step oid=24 interval=217985 count=1 add=0, queue_step oid=16 interval=39179 count=23 add=-147, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=640388 count=1 add=0, queue_step oid=13 interval=45256 count=7 add=2428, queue_step oid=24 interval=188605 count=1 add=0, queue_step oid=16 interval=38137 count=14 add=-834, queue_step oid=24 interval=126750 count=3 add=-16619
Sent 55 5533.326120 5533.326120 61: seq: 10, queue_step oid=13 interval=71809 count=1 add=0, queue_step oid=13 interval=110115 count=5 add=11805, queue_step oid=24 interval=79433 count=8 add=-3885, queue_step oid=16 interval=27659 count=32 add=-272, queue_step oid=24 interval=51938 count=14 add=-1090, queue_step oid=13 interval=174495 count=2 add=30446, queue_step oid=16 interval=19894 count=32 add=-169
Sent 56 5533.326378 5533.326378 59: seq: 11, queue_step oid=24 interval=38050 count=27 add=-311, queue_step oid=16 interval=15248 count=56 add=-74, queue_step oid=24 interval=30888 count=33 add=-66, queue_step oid=16 interval=11587 count=88 add=-33, queue_step oid=16 interval=9025 count=153 add=-11, queue_step oid=24 interval=29506 count=37 add=114, queue_step oid=24 interval=34640 count=42 add=269
Sent 57 5533.326501 5533.326501 59: seq: 12, queue_step oid=16 interval=7582 count=184 add=-3, queue_step oid=16 interval=7150 count=6448 add=0, queue_step oid=24 interval=47387 count=35 add=224, queue_step oid=24 interval=53813 count=1295 add=0, queue_step oid=19 interval=33523558 count=1 add=0, queue_step oid=22 interval=33523558 count=1 add=0, queue_step oid=23 interval=33523558 count=1 add=0
Sent 58 5533.334753 5533.334753 62: seq: 13, queue_step oid=16 interval=7149 count=3597 add=0, set_next_step_dir oid=13 dir=1, queue_step oid=13 interval=94412946 count=1 add=0, queue_step oid=19 interval=33523558 count=1 add=0, queue_step oid=22 interval=33523558 count=1 add=0, queue_step oid=23 interval=33523558 count=1 add=0, queue_step oid=24 interval=53816 count=282 add=0, queue_step oid=16 interval=7150 count=2434 add=0
Sent 59 5533.334753 5533.334753 63: seq: 14, queue_step oid=24 interval=54463 count=19 add=454, queue_step oid=24 interval=65115 count=10 add=1683, queue_step oid=24 interval=84315 count=6 add=6159, queue_step oid=16 interval=7351 count=155 add=4, queue_step oid=24 interval=136658 count=2 add=26554, queue_step oid=24 interval=215087 count=1 add=0, set_next_step_dir oid=13 dir=0, queue_step oid=13 interval=3878953 count=1 add=0
Sent 60 5533.334753 5533.334753 60: seq: 15, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=819015 count=1 add=0, queue_step oid=16 interval=8238 count=119 add=15, queue_step oid=24 interval=221694 count=1 add=0, queue_step oid=24 interval=160282 count=3 add=-17685, queue_step oid=24 interval=110275 count=7 add=-3445, queue_step oid=16 interval=10354 count=72 add=40, queue_step oid=24 interval=88035 count=9 add=792
Sent 61 5533.334753 5533.334753 62: seq: 16, queue_step oid=16 interval=13653 count=46 add=100, queue_step oid=24 interval=101362 count=4 add=7727, queue_step oid=16 interval=18954 count=22 add=278, queue_step oid=24 interval=144046 count=2 add=31833, queue_step oid=16 interval=26555 count=23 add=537, queue_step oid=13 interval=162844 count=3 add=-25420, queue_step oid=24 interval=308686 count=1 add=0
Sent 62 5533.334753 5533.334753 59: seq: 17, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=268756 count=2 add=13966, queue_step oid=13 interval=102304 count=5 add=-6694, queue_step oid=16 interval=40764 count=8 add=1663, queue_step oid=13 interval=70591 count=4 add=-1602, queue_step oid=24 interval=146039 count=3 add=-25463, queue_step oid=16 interval=65035 count=4 add=4005
Sent 63 5533.334753 5533.334753 63: seq: 18, queue_step oid=13 interval=46489 count=14 add=-1284, queue_step oid=24 interval=86324 count=6 add=-5635, queue_step oid=16 interval=70947 count=6 add=1564, queue_step oid=13 interval=30589 count=23 add=-448, queue_step oid=24 interval=57559 count=12 add=-1574, queue_step oid=16 interval=93497 count=4 add=4779, queue_step oid=16 interval=124242 count=2 add=24073
Sent 64 5533.334753 5533.334753 64: seq: 19, queue_step oid=13 interval=21590 count=21 add=-262, queue_step oid=24 interval=41321 count=20 add=-497, queue_step oid=16 interval=130460 count=4 add=-5750, queue_step oid=13 interval=16862 count=53 add=-93, queue_step oid=16 interval=139489 count=2 add=20958, queue_step oid=24 interval=32582 count=33 add=-130, queue_step oid=16 interval=144850 count=3 add=-4382
Sent 65 5533.334753 5533.334753 63: seq: 1a, queue_step oid=13 interval=12481 count=87 add=-40, queue_step oid=16 interval=196688 count=3 add=10722, queue_step oid=24 interval=28971 count=39 add=57, queue_step oid=13 interval=9338 count=126 add=-13, queue_step oid=16 interval=268943 count=2 add=-11414, set_next_step_dir oid=16 dir=1, queue_step oid=16 interval=138491 count=1 add=0, queue_step oid=16 interval=245751 count=4 add=13838
Sent 66 5533.775465 5533.775465 24: seq: 1b, queue_digital_out oid=33 clock=4203594624 on_ticks=3251294, queue_step oid=24 interval=31769 count=42 add=230
Sent 67 5534.019512 5534.019512 58: seq: 1c, queue_step oid=19 interval=14606928 count=1 add=0, queue_step oid=22 interval=14606928 count=1 add=0, queue_step oid=23 interval=14606928 count=1 add=0, queue_step oid=13 interval=7887 count=115 add=-6, queue_step oid=16 interval=129162 count=1 add=0, queue_step oid=16 interval=71240 count=11 add=-405, queue_step oid=13 interval=7430 count=180 add=-2
Sent 68 5534.019512 5534.019512 59: seq: 1d, queue_step oid=24 interval=42158 count=27 add=364, queue_step oid=16 interval=70729 count=6 add=-815, queue_step oid=16 interval=53714 count=4 add=-2995, queue_step oid=16 interval=47887 count=10 add=-296, queue_step oid=13 interval=7286 count=275 add=0, queue_step oid=24 interval=53246 count=16 add=888, queue_step oid=16 interval=40105 count=16 add=0
Sent 69 5534.019512 5534.019512 58: seq: 1e, queue_step oid=16 interval=37705 count=16 add=-106, queue_step oid=24 interval=68898 count=9 add=2487, queue_step oid=16 interval=32097 count=22 add=-154, queue_step oid=13 interval=7391 count=177 add=4, queue_step oid=24 interval=95924 count=4 add=9445, set_next_step_dir oid=19 dir=0, queue_step oid=19 interval=23417565 count=1 add=0, set_next_step_dir oid=22 dir=0
Sent 70 5534.019512 5534.019512 57: seq: 1f, queue_step oid=22 interval=23417565 count=1 add=0, set_next_step_dir oid=23 dir=0, queue_step oid=23 interval=23417565 count=1 add=0, queue_step oid=16 interval=30953 count=30 add=-31, queue_step oid=24 interval=142423 count=2 add=31391, queue_step oid=24 interval=259354 count=1 add=0, set_next_step_dir oid=24 dir=1, queue_step oid=24 interval=593529 count=1 add=0
Sent 71 5534.019512 5534.019512 59: seq: 10, queue_step oid=16 interval=27579 count=51 add=191, queue_step oid=13 interval=8305 count=133 add=16, queue_step oid=24 interval=266859 count=1 add=0, queue_step oid=24 interval=174518 count=3 add=-24653, queue_step oid=24 interval=114353 count=6 add=-5080, queue_step oid=13 interval=10749 count=73 add=47, queue_step oid=16 interval=38751 count=19 add=659
Sent 72 5534.019512 5534.019512 60: seq: 11, queue_step oid=24 interval=88472 count=10 add=-764, queue_step oid=13 interval=14596 count=42 add=120, queue_step oid=16 interval=53347 count=11 add=1733, queue_step oid=24 interval=82249 count=11 add=1556, queue_step oid=13 interval=20115 count=22 add=344, queue_step oid=16 interval=77737 count=3 add=6536, queue_step oid=16 interval=213813 count=1 add=0
Sent 73 5534.019512 5534.019512 64: seq: 12, queue_step oid=13 interval=29128 count=21 add=537, queue_step oid=24 interval=104846 count=4 add=7200, set_next_step_dir oid=16 dir=0, queue_step oid=16 interval=421698 count=1 add=0, queue_step oid=16 interval=225032 count=1 add=0, queue_step oid=24 interval=138009 count=2 add=27421, queue_step oid=13 interval=43019 count=7 add=2023, queue_step oid=16 interval=169856 count=2 add=-19411
Sent 74 5534.019512 5534.019512 60: seq: 13, queue_step oid=24 interval=203934 count=1 add=0, queue_step oid=13 interval=59942 count=2 add=17882, queue_step oid=24 interval=298124 count=1 add=0, queue_step oid=16 interval=80249 count=6 add=-4771, queue_step oid=13 interval=70640 count=11 add=1062, queue_step oid=24 interval=653151 count=1 add=0, queue_step oid=16 interval=53819 count=10 add=-1004
Sent 75 5534.019512 5534.019512 60: seq: 14, queue_step oid=16 interval=49923 count=11 add=-11, set_next_step_dir oid=24 dir=0, queue_step oid=24 interval=447636 count=1 add=0, queue_step oid=13 interval=94509 count=2 add=0, queue_step oid=13 interval=126506 count=2 add=28450, queue_step oid=24 interval=621364 count=1 add=0, queue_step oid=13 interval=138481 count=1 add=0, queue_step oid=16 interval=58685 count=5 add=1679
Sent 76 5534.019512 5534.019512 63: seq: 15, queue_step oid=13 interval=92666 count=6 add=-4908, queue_step oid=16 interval=57915 count=8 add=3214, queue_step oid=24 interval=289168 count=1 add=0, queue_step oid=13 interval=69010 count=8 add=2162, queue_step oid=24 interval=200420 count=2 add=-32404, queue_step oid=16 interval=93274 count=3 add=12308, queue_step oid=13 interval=70973 count=4 add=4936
Sent 77 5534.019512 5534.019512 64: seq: 16, set_next_step_dir oid=16 dir=1, queue_step oid=16 interval=496889 count=1 add=0, queue_step oid=24 interval=136445 count=5 add=-8886, queue_step oid=13 interval=105125 count=4 add=-6026, queue_step oid=16 interval=186804 count=1 add=0, queue_step oid=24 interval=94909 count=12 add=-3333, queue_step oid=16 interval=125289 count=3 add=-16783, queue_step oid=13 interval=93790 count=5 add=0
Sent 78 5534.019512 5534.019512 64: seq: 17, queue_step oid=16 interval=78488 count=5 add=-6203, queue_step oid=13 interval=84783 count=4 add=7642, queue_step oid=16 interval=53147 count=5 add=-2190, queue_step oid=24 interval=57006 count=15 add=-1187, queue_step oid=13 interval=236029 count=2 add=-11018, queue_step oid=16 interval=34995 count=24 add=-527, queue_step oid=13 interval=225328 count=2 add=26992
Sent 79 5534.021296 5534.021296 58: seq: 18, queue_step oid=24 interval=40775 count=24 add=-401, queue_step oid=16 interval=23379 count=49 add=-186, queue_step oid=13 interval=2941275 count=1 add=0, queue_step oid=24 interval=32396 count=39 add=-98, queue_step oid=16 interval=14921 count=67 add=-64, queue_step oid=16 interval=11046 count=94 add=-28, queue_step oid=24 interval=29105 count=38 add=45
Sent 80 5534.021388 5534.021388 57: seq: 19, queue_step oid=16 interval=8778 count=153 add=-10, queue_step oid=24 interval=31317 count=41 add=220, queue_step oid=16 interval=7471 count=219 add=-2, queue_step oid=24 interval=41457 count=46 add=288, queue_step oid=16 interval=7150 count=6278 add=0, queue_step oid=24 interval=53570 count=79 add=6, queue_step oid=24 interval=53813 count=1335 add=0
Sent 81 5534.023409 5534.023409 62: seq: 1a, queue_step oid=19 interval=25702959 count=2 add=0, queue_step oid=22 interval=25702959 count=2 add=0, queue_step oid=23 interval=25702959 count=2 add=0, queue_step oid=16 interval=7149 count=4695 add=0, set_next_step_dir oid=13 dir=1, queue_step oid=13 interval=86083322 count=1 add=0, queue_step oid=24 interval=54577 count=18 add=453, queue_step oid=16 interval=7165 count=179 add=0
Sent 82 5534.043759 5534.043759 22: seq: 1b, get_clock, queue_step oid=24 interval=63487 count=11 add=1752, queue_step oid=24 interval=85038 count=5 add=6519
Sent 83 5534.064140 5534.064140 14: seq: 1c, tmcuart_send oid=7 write='\xea\x03\xe8\xad\xe1' read=10
Sent 84 5534.077446 5534.077446 8: seq: 1d, update_digital_out oid=1 value=0
Sent 85 5534.080016 5534.080016 59: seq: 1e, spi_send oid=0 data='\xb0\x15\x02', update_digital_out oid=1 value=1, spi_send oid=0 data='\xe0\xe0\xc0\x80\x00\xbc\xbc\x1c\x8c\x80\x80\x80', update_digital_out oid=1 value=0, spi_send oid=0 data='\xb1\x15\x02', update_digital_out oid=1 value=1, spi_send oid=0 data='\x01\x01\x0118==\x00\x01\x03\x07\x07', update_digital_out oid=1 value=0
Sent 86 5534.082592 5534.082592 39: seq: 1f, tmcuart_send oid=7 write='\xea\x03( \xc3' read=10, spi_send oid=0 data='\xb2\x10\x01', update_digital_out oid=1 value=1, spi_send oid=0 data=' T\x88\x00\x00 T\x88\x00\x00 T\x88'
Sent 87 5534.099902 5534.099902 14: seq: 10, tmcuart_send oid=8 write='\xea\x03\xe8\xad\xe1' read=10
Sent 88 5534.106837 5534.106837 14: seq: 11, tmcuart_send oid=9 write='\xea\x03\xe8\xad\xe1' read=10
Sent 89 5534.112817 5534.112817 14: seq: 12, tmcuart_send oid=5 write='\xea\x03\xe8\xad\xe1' read=10
Sent 90 5534.119477 5534.119477 14: seq: 13, tmcuart_send oid=6 write='\xea\x03\xe8\xad\xe1' read=10
Sent 91 5534.126010 5534.126010 25: seq: 14, tmcuart_send oid=10 write='\xea\x03\xe8\xad\xe1' read=10, queue_digital_out oid=43 clock=4275594624 on_ticks=11034311
Sent 92 5534.132601 5534.132601 14: seq: 15, tmcuart_send oid=8 write='\xea\x03( \xc3' read=10
Sent 93 5534.138866 5534.138866 14: seq: 16, tmcuart_send oid=9 write='\xea\x03( \xc3' read=10
Sent 94 5534.145128 5534.145128 14: seq: 17, tmcuart_send oid=5 write='\xea\x03( \xc3' read=10
Sent 95 5534.151769 5534.151769 14: seq: 18, tmcuart_send oid=6 write='\xea\x03( \xc3' read=10
Sent 96 5534.158200 5534.158200 14: seq: 19, tmcuart_send oid=10 write='\xea\x03( \xc3' read=10
Sent 97 5534.374802 5534.374802 15: seq: 1a, queue_digital_out oid=33 clock=16627328 on_ticks=1368446
Sent 98 5534.843177 5534.843177 8: seq: 1b, buttons_ack oid=25 count=1
Sent 99 5534.945539 5534.945539 16: seq: 1c, queue_digital_out oid=33 clock=70627328 on_ticks=3189516
Dumping receive queue 100 messages
Receive: 0 5531.123661 5531.117302 14: seq: 15, analog_in_state oid=42 next_clock=3734154624 value=1972
Receive: 1 5531.128892 5531.124521 18: seq: 16, tmcuart_response oid=8 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 2 5531.135384 5531.130799 18: seq: 17, tmcuart_response oid=9 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 3 5531.141887 5531.137485 18: seq: 18, tmcuart_response oid=5 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 4 5531.148504 5531.143746 18: seq: 19, tmcuart_response oid=6 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 5 5531.154918 5531.150387 18: seq: 1a, tmcuart_response oid=10 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 6 5531.323909 5531.150387 15: seq: 1a, analog_in_state oid=32 next_clock=3770154624 value=27686
Receive: 7 5531.353967 5531.150387 14: seq: 1a, analog_in_state oid=35 next_clock=3775554624 value=7757
Receive: 8 5531.364045 5531.150387 15: seq: 1a, analog_in_state oid=36 next_clock=3777354624 value=31062
Receive: 9 5531.423047 5531.375167 14: seq: 1b, analog_in_state oid=42 next_clock=3788154624 value=1968
Receive: 10 5531.623297 5531.543563 15: seq: 17, analog_in_state oid=32 next_clock=3824154624 value=27675
Receive: 11 5531.653380 5531.543563 14: seq: 17, analog_in_state oid=35 next_clock=3829554624 value=7759
Receive: 12 5531.663499 5531.543563 15: seq: 17, analog_in_state oid=36 next_clock=3831354624 value=31041
Receive: 13 5531.723823 5531.675596 14: seq: 18, analog_in_state oid=42 next_clock=3842154624 value=1971
Receive: 14 5531.923960 5531.675596 15: seq: 18, analog_in_state oid=32 next_clock=3878154624 value=27691
Receive: 15 5531.954070 5531.675596 14: seq: 18, analog_in_state oid=35 next_clock=3883554624 value=7753
Receive: 16 5531.962888 5531.675596 15: seq: 18, analog_in_state oid=36 next_clock=3885354624 value=31064
Receive: 17 5532.023772 5532.001762 14: seq: 13, analog_in_state oid=42 next_clock=3896154624 value=1968
Receive: 18 5532.066566 5532.062077 18: seq: 14, tmcuart_response oid=7 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 19 5532.075626 5532.075048 11: seq: 17, clock clock=3852905846
Receive: 20 5532.093499 5532.088388 18: seq: 18, tmcuart_response oid=7 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 21 5532.101158 5532.096185 18: seq: 19, tmcuart_response oid=8 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 22 5532.107634 5532.102897 18: seq: 1a, tmcuart_response oid=9 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 23 5532.114129 5532.108989 18: seq: 1b, tmcuart_response oid=5 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 24 5532.120632 5532.115422 18: seq: 1c, tmcuart_response oid=6 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 25 5532.127135 5532.121954 18: seq: 1d, tmcuart_response oid=10 read='\n\xfa\xef-\x80"\x02\x08 \xce'
Receive: 26 5532.133630 5532.128566 18: seq: 1e, tmcuart_response oid=8 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 27 5532.140132 5532.135416 18: seq: 1f, tmcuart_response oid=9 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 28 5532.146638 5532.141960 18: seq: 10, tmcuart_response oid=5 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 29 5532.153165 5532.148472 18: seq: 11, tmcuart_response oid=6 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 30 5532.159636 5532.155118 18: seq: 12, tmcuart_response oid=10 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 31 5532.223578 5532.155118 15: seq: 12, analog_in_state oid=32 next_clock=3932154624 value=27690
Receive: 32 5532.253667 5532.155118 14: seq: 12, analog_in_state oid=35 next_clock=3937554624 value=7755
Receive: 33 5532.263768 5532.155118 15: seq: 12, analog_in_state oid=36 next_clock=3939354624 value=31058
Receive: 34 5532.323956 5532.155118 14: seq: 12, analog_in_state oid=42 next_clock=3950154624 value=1969
Receive: 35 5532.523800 5532.420363 15: seq: 10, analog_in_state oid=32 next_clock=3986154624 value=27680
Receive: 36 5532.553909 5532.420363 14: seq: 10, analog_in_state oid=35 next_clock=3991554624 value=7755
Receive: 37 5532.564077 5532.420363 15: seq: 10, analog_in_state oid=36 next_clock=3993354624 value=31054
Receive: 38 5532.623085 5532.575204 14: seq: 11, analog_in_state oid=42 next_clock=4004154624 value=1968
Receive: 39 5532.823836 5532.697587 15: seq: 12, analog_in_state oid=32 next_clock=4040154624 value=27684
Receive: 40 5532.853978 5532.697587 14: seq: 12, analog_in_state oid=35 next_clock=4045554624 value=7753
Receive: 41 5532.864062 5532.697587 15: seq: 12, analog_in_state oid=36 next_clock=4047354624 value=31051
Receive: 42 5532.922922 5532.697587 14: seq: 12, analog_in_state oid=42 next_clock=4058154624 value=1969
Receive: 43 5533.026825 5532.697587 11: seq: 12, buttons_state oid=25 ack_count=250 state='\x07'
Receive: 44 5533.060808 5533.059324 11: seq: 14, clock clock=4030076169
Receive: 45 5533.068608 5533.064367 18: seq: 15, tmcuart_response oid=7 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 46 5533.098027 5533.093492 18: seq: 19, tmcuart_response oid=7 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 47 5533.105679 5533.101121 18: seq: 1a, tmcuart_response oid=8 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 48 5533.112161 5533.107639 18: seq: 1b, tmcuart_response oid=9 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 49 5533.118670 5533.113877 18: seq: 1c, tmcuart_response oid=5 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 50 5533.123863 5533.120333 15: seq: 1d, analog_in_state oid=32 next_clock=4094154624 value=27678
Receive: 51 5533.125232 5533.120333 18: seq: 1d, tmcuart_response oid=6 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 52 5533.131743 5533.126484 18: seq: 1e, tmcuart_response oid=10 read='\n\xfa\xef-\x80"\x02\x08 \xce'
Receive: 53 5533.138245 5533.133055 18: seq: 1f, tmcuart_response oid=8 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 54 5533.144737 5533.139927 18: seq: 10, tmcuart_response oid=9 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 55 5533.151260 5533.146432 18: seq: 11, tmcuart_response oid=5 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 56 5533.153879 5533.146432 14: seq: 11, analog_in_state oid=35 next_clock=4099554624 value=7759
Receive: 57 5533.157867 5533.153045 18: seq: 12, tmcuart_response oid=6 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 58 5533.163115 5533.159513 15: seq: 13, analog_in_state oid=36 next_clock=4101354624 value=31054
Receive: 59 5533.164484 5533.159513 18: seq: 13, tmcuart_response oid=10 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 60 5533.223436 5533.159513 14: seq: 13, analog_in_state oid=42 next_clock=4112154624 value=1968
Receive: 61 5533.423813 5533.334753 15: seq: 1b, analog_in_state oid=32 next_clock=4148154624 value=27682
Receive: 62 5533.453910 5533.334753 14: seq: 1b, analog_in_state oid=35 next_clock=4153554624 value=7757
Receive: 63 5533.464013 5533.334753 15: seq: 1b, analog_in_state oid=36 next_clock=4155354624 value=31055
Receive: 64 5533.522911 5533.334753 14: seq: 1b, analog_in_state oid=42 next_clock=4166154624 value=1972
Receive: 65 5533.723068 5533.334753 15: seq: 1b, analog_in_state oid=32 next_clock=4202154624 value=27686
Receive: 66 5533.753249 5533.334753 14: seq: 1b, analog_in_state oid=35 next_clock=4207554624 value=7756
Receive: 67 5533.763332 5533.334753 15: seq: 1b, analog_in_state oid=36 next_clock=4209354624 value=31060
Receive: 68 5533.823572 5533.775465 14: seq: 1c, analog_in_state oid=42 next_clock=4220154624 value=1972
Receive: 69 5533.996194 5533.775465 16: seq: 1c, stats count=862 sum=1641056 sumsq=33764169
Receive: 70 5534.023269 5534.021388 14: seq: 1a, analog_in_state oid=32 next_clock=4256154624 value=27683
Receive: 71 5534.044818 5534.043759 11: seq: 1c, clock clock=4207283763
Receive: 72 5534.053743 5534.043759 13: seq: 1c, analog_in_state oid=35 next_clock=4261554624 value=7754
Receive: 73 5534.063886 5534.043759 14: seq: 1c, analog_in_state oid=36 next_clock=4263354624 value=31051
Receive: 74 5534.069119 5534.064140 18: seq: 1d, tmcuart_response oid=7 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 75 5534.087044 5534.082592 18: seq: 10, tmcuart_response oid=7 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 76 5534.104832 5534.099902 18: seq: 11, tmcuart_response oid=8 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 77 5534.111268 5534.106837 18: seq: 12, tmcuart_response oid=9 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 78 5534.117784 5534.112817 18: seq: 13, tmcuart_response oid=5 read='\n\xfa\xef-\xc0>\x02\x08\xa0\xf6'
Receive: 79 5534.123015 5534.119477 13: seq: 14, analog_in_state oid=42 next_clock=4274154624 value=1977
Receive: 80 5534.124382 5534.119477 18: seq: 14, tmcuart_response oid=6 read='\n\xfa\xef-\x80>\x02\x08\xa0\xfd'
Receive: 81 5534.130894 5534.126010 18: seq: 15, tmcuart_response oid=10 read='\n\xfa\xef-\x80"\x02\x08 \xce'
Receive: 82 5534.137371 5534.132601 18: seq: 16, tmcuart_response oid=8 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 83 5534.143845 5534.138866 18: seq: 17, tmcuart_response oid=9 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 84 5534.150365 5534.145128 18: seq: 18, tmcuart_response oid=5 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 85 5534.156849 5534.151769 18: seq: 19, tmcuart_response oid=6 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 86 5534.163342 5534.158200 18: seq: 1a, tmcuart_response oid=10 read='\n\xfa/ \x80\x00\x02\x08\xa0\x89'
Receive: 87 5534.323500 5534.158200 14: seq: 1a, analog_in_state oid=32 next_clock=15187328 value=27673
Receive: 88 5534.353629 5534.158200 13: seq: 1a, analog_in_state oid=35 next_clock=20587328 value=7755
Receive: 89 5534.363717 5534.158200 14: seq: 1a, analog_in_state oid=36 next_clock=22387328 value=31057
Receive: 90 5534.423983 5534.374802 13: seq: 1b, analog_in_state oid=42 next_clock=33187328 value=1976
Receive: 91 5534.564184 5534.374802 11: seq: 1b, buttons_state oid=25 ack_count=251 state='\x0f'
Receive: 92 5534.623032 5534.374802 14: seq: 1b, analog_in_state oid=32 next_clock=69187328 value=27684
Receive: 93 5534.653161 5534.374802 13: seq: 1b, analog_in_state oid=35 next_clock=74587328 value=7756
Receive: 94 5534.663267 5534.374802 14: seq: 1b, analog_in_state oid=36 next_clock=76387328 value=31060
Receive: 95 5534.665853 5534.374802 11: seq: 1b, buttons_state oid=25 ack_count=251 state='\x0f'
Receive: 96 5534.723544 5534.374802 13: seq: 1b, analog_in_state oid=42 next_clock=87187328 value=1975
Receive: 97 5534.768663 5534.374802 11: seq: 1b, buttons_state oid=25 ack_count=251 state='\x0f'
Receive: 98 5534.923955 5534.843177 14: seq: 1c, analog_in_state oid=32 next_clock=123187328 value=27671
Receive: 99 5534.946504 5534.945539 11: seq: 1d, shutdown clock=74632346 static_string_id=Timer too close
Transition to shutdown state: MCU 'mcu' shutdown: Timer too close
This often indicates the host computer is overloaded. Check
for other processes consuming excessive CPU time, high swap
usage, disk errors, overheating, unstable voltage, or
similar system problems on the host computer.
Dumping gcode input 0 blocks
Dumping 20 requests for client 1965818344
Received 412.030282: {"id": 1748457616, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}
Received 412.038472: {"id": 1748457936, "method": "objects/query", "params": {"objects": {"heaters": null}}}
Received 412.039754: {"id": 1748457040, "method": "objects/query", "params": {"objects": {"heaters": null}}}
Received 412.052450: {"id": 1748456944, "method": "info", "params": {}}
Received 412.054138: {"id": 1748458128, "method": "objects/list", "params": {}}
Received 412.054138: {"id": 1748903888, "method": "gcode/help", "params": {}}
Received 412.088758: {"id": 1748902352, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_sensor raspberry_pi": null, "temperature_sensor mcu_temp": null, "temperature_sensor chamber": null, "extruder": null, "display_status": null, "toolhead": null, "gcode_move": null, "virtual_sdcard": null, "configfile": null, "mcu": null, "mcu rpi": null, "gcode_macro HELLO_WORLD": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro clean_nozzle": null, "gcode_macro G32": null, "gcode_macro CG28": null, "gcode_macro XYCG28": null, "gcode_macro ZCG28": null, "gcode_macro M109": null, "gcode_macro CALIBRATE_Z": null, "gcode_macro SHUTDOWN": null, "gcode_macro REBOOT": null, "gcode_macro _bot_data": null, "gcode_macro BACKUP_CFG": null, "gcode_macro COOLDOWN": null, "gcode_macro RESETSPEEDS": null, "gcode_macro BEEP": null, "gcode_macro DIRECT_MOVE": null, "gcode_macro _PRINT_AR": null, "gcode_macro M115": null, "gcode_macro bedfanvars": null, "fan_generic BedFans": null, "gcode_macro BedFansSlow": null, "gcode_macro BedFansFast": null, "gcode_macro BedFansOff": null, "gcode_macro SET_HEATER_TEMPERATURE": null, "gcode_macro M190": null, "gcode_macro M140": null, "gcode_macro TURN_OFF_HEATERS": null, "query_endstops": null, "z_calibration": null, "gcode_macro _User_Variables": null, "gcode_macro _Probe_Variables": null, "gcode_macro _klicky_check_variables_version": null, "gcode_macro _KlickyDebug": null, "gcode_macro _exit_point": null, "gcode_macro _entry_point": null, "gcode_macro _Homing_Variables": null, "gcode_macro Attach_Probe_Lock": null, "gcode_macro Dock_Probe_Unlock": null, "gcode_macro _Probe_Unlock": null, "gcode_macro _Probe_Lock": null, "gcode_macro _DeployKlickyDock": null, "gcode_macro _RetractKlickyDock": null, "gcode_macro Attach_Probe": null, "gcode_macro Dock_Probe": null, "gcode_macro PROBE_CALIBRATE": null, "gcode_macro PROBE_ACCURACY": null, "gcode_macro _Umbilical_Path": null, "gcode_macro _Home_Z": null, "gcode_macro _CheckProbe": null, "gcode_macro _SetProbeState": null, "gcode_macro _Park_Toolhead": null, "gcode_macro _klicky_status_ready": null, "gcode_macro _klicky_status_busy": null, "gcode_macro _klicky_status_leveling": null, "gcode_macro _klicky_status_homing": null, "gcode_macro _klicky_status_cleaning": null, "gcode_macro _klicky_status_meshing": null, "gcode_macro _klicky_status_calibrating_z": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro Z_TILT_ADJUST": null, "gcode_macro HEATSOAK_CHAMBER": null, "gcode_macro _WAIT_CHAMBER_TEMP": null, "gcode_macro HEATSOAK_BED": null, "heaters": null, "heater_fan hotend_fan": null, "fan": null, "controller_fan controller_fan": null, "fan_generic exhaust_fan": null, "gcode_macro _LOW_TEMP_CHECK": null, "gcode_macro CHANGE_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro TIP_SHAPING": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _ADAPTIVE_MESH_VARIABLES": null, "gcode_macro COMPUTE_MESH_PARAMETERS": null, "gcode_macro ADAPTIVE_BED_MESH": null, "gcode_macro _DO_ADAPTIVE_MESH": null, "gcode_macro SEARCH_VARS": null, "gcode_macro CALIBRATE": null, "gcode_macro _FLOW_CALIB_VARIABLES": null, "gcode_macro FLOW_MULTIPLIER_CALIBRATION": null, "gcode_macro COMPUTE_FLOW_MULTIPLIER": null, "gcode_macro PRESSURE_ADVANCE_CALIBRATION": null, "gcode_macro M486": null, "gcode_macro M701": null, "gcode_macro M702": null, "gcode_macro M125": null, "gcode_macro M900": null, "gcode_macro M204": null, "gcode_macro M117": null, "gcode_macro M808": null, "neopixel sb_leds": null, "gcode_macro _sb_vars": null, "gcode_macro _set_sb_leds": null, "gcode_macro _set_sb_leds_by_name": null, "gcode_macro _set_logo_leds": null, "gcode_macro _set_nozzle_leds": null, "gcode_macro set_logo_leds_off": null, "gcode_macro set_nozzle_leds_on": null, "gcode_macro set_nozzle_leds_off": null, "gcode_macro status_off": null, "gcode_macro status_ready": null, "gcode_macro status_busy": null, "gcode_macro status_heating": null, "gcode_macro status_leveling": null, "gcode_macro status_homing": null, "gcode_macro status_cleaning": null, "gcode_macro status_meshing": null, "gcode_macro status_calibrating_z": null, "gcode_macro status_printing": null, "pause_resume": null, "filament_motion_sensor filament_sensor": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro RESONANCES_TEST": null, "gcode_macro DUMP_PARAMETERS": null, "gcode_macro TEST_SPEED": null, "gcode_macro FEED_RATE_TEST": null, "gcode_macro _X_TEST": null, "gcode_macro _Y_TEST": null, "gcode_macro _RECT_TEST": null, "gcode_macro _DIAG_TEST": null, "gcode_macro _CIRCLE_TEST": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro TOGGLE_BEEPER": null, "gcode_macro SONG_SINGLE_BEEP": null, "output_pin beeper": null, "gcode_macro M300": null, "gcode_macro SONG_THUNDERSTRUCK": null, "gcode_macro SONG_AFRICA": null, "gcode_macro SONG_STARWARS_IMP": null, "gcode_macro SONG_ALLIWANT": null, "gcode_macro SONG_MACGYVER": null, "gcode_macro SONG_TAKEONME": null, "gcode_macro SONG_DUCKTOY": null, "gcode_macro SONG_LOONEY": null, "gcode_macro SONG_RICE_COOKER_DONE": null, "gcode_macro Song_Futurama1": null, "gcode_macro Song_Futurama2": null, "gcode_macro Song_Mario": null, "gcode_macro Song_Mario2": null, "gcode_macro Song_Doom": null, "gcode_macro Song_Simpsons": null, "gcode_macro Song_Centerfold": null, "gcode_macro Song_GanstaParadise": null, "gcode_macro Song_Naruto": null, "gcode_macro Song_StillAlive": null, "gcode_macro Song_OnlineSong": null, "gcode_macro _ADD_PRINT_TIME": null, "gcode_macro _DISPLAY_PRINT_TIME": null, "gcode_macro _SD_PRINT_STATS": null, "gcode_macro _SD_PRINTER_STATS": null, "gcode_macro _CHECK_FILTER": null, "gcode_macro RST_FILTER": null, "gcode_macro RST_SERVICE": null, "save_variables": null, "gcode_macro _EXECUTE_AT_INIT": null, "gcode_macro _CHECK_CONSITENT": null, "gcode_macro _USER_VARIABLE": null, "gcode_macro AXES_SHAPER_CALIBRATION": null, "gcode_macro BELTS_SHAPER_CALIBRATION": null, "gcode_macro VIBRATIONS_CALIBRATION": null, "neopixel lcd": null, "gcode_macro LCDRGB": null, "gcode_macro RESETRGB": null, "exclude_object": null, "idle_timeout": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "tmc2209 stepper_z2": null, "tmc2209 extruder": null, "probe": null, "z_tilt": null, "bed_mesh": null, "output_pin light": null, "gcode_macro light_off": null, "gcode_macro light_dim": null, "gcode_macro light_on": null, "temperature_host raspberry_pi": null, "motion_report": null, "system_stats": null, "manual_probe": null}, "response_template": {"method": "process_status_update"}}}
Received 412.232845: {"id": 1748459120, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_sensor raspberry_pi": null, "temperature_sensor mcu_temp": null, "temperature_sensor chamber": null, "extruder": null, "display_status": null, "toolhead": null, "gcode_move": null, "virtual_sdcard": null, "configfile": null, "mcu": null, "mcu rpi": null, "gcode_macro HELLO_WORLD": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro clean_nozzle": null, "gcode_macro G32": null, "gcode_macro CG28": null, "gcode_macro XYCG28": null, "gcode_macro ZCG28": null, "gcode_macro M109": null, "gcode_macro CALIBRATE_Z": null, "gcode_macro SHUTDOWN": null, "gcode_macro REBOOT": null, "gcode_macro _bot_data": null, "gcode_macro BACKUP_CFG": null, "gcode_macro COOLDOWN": null, "gcode_macro RESETSPEEDS": null, "gcode_macro BEEP": null, "gcode_macro DIRECT_MOVE": null, "gcode_macro _PRINT_AR": null, "gcode_macro M115": null, "gcode_macro bedfanvars": null, "fan_generic BedFans": null, "gcode_macro BedFansSlow": null, "gcode_macro BedFansFast": null, "gcode_macro BedFansOff": null, "gcode_macro SET_HEATER_TEMPERATURE": null, "gcode_macro M190": null, "gcode_macro M140": null, "gcode_macro TURN_OFF_HEATERS": null, "query_endstops": null, "z_calibration": null, "gcode_macro _User_Variables": null, "gcode_macro _Probe_Variables": null, "gcode_macro _klicky_check_variables_version": null, "gcode_macro _KlickyDebug": null, "gcode_macro _exit_point": null, "gcode_macro _entry_point": null, "gcode_macro _Homing_Variables": null, "gcode_macro Attach_Probe_Lock": null, "gcode_macro Dock_Probe_Unlock": null, "gcode_macro _Probe_Unlock": null, "gcode_macro _Probe_Lock": null, "gcode_macro _DeployKlickyDock": null, "gcode_macro _RetractKlickyDock": null, "gcode_macro Attach_Probe": null, "gcode_macro Dock_Probe": null, "gcode_macro PROBE_CALIBRATE": null, "gcode_macro PROBE_ACCURACY": null, "gcode_macro _Umbilical_Path": null, "gcode_macro _Home_Z": null, "gcode_macro _CheckProbe": null, "gcode_macro _SetProbeState": null, "gcode_macro _Park_Toolhead": null, "gcode_macro _klicky_status_ready": null, "gcode_macro _klicky_status_busy": null, "gcode_macro _klicky_status_leveling": null, "gcode_macro _klicky_status_homing": null, "gcode_macro _klicky_status_cleaning": null, "gcode_macro _klicky_status_meshing": null, "gcode_macro _klicky_status_calibrating_z": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro Z_TILT_ADJUST": null, "gcode_macro HEATSOAK_CHAMBER": null, "gcode_macro _WAIT_CHAMBER_TEMP": null, "gcode_macro HEATSOAK_BED": null, "heaters": null, "heater_fan hotend_fan": null, "fan": null, "controller_fan controller_fan": null, "fan_generic exhaust_fan": null, "gcode_macro _LOW_TEMP_CHECK": null, "gcode_macro CHANGE_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro TIP_SHAPING": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _ADAPTIVE_MESH_VARIABLES": null, "gcode_macro COMPUTE_MESH_PARAMETERS": null, "gcode_macro ADAPTIVE_BED_MESH": null, "gcode_macro _DO_ADAPTIVE_MESH": null, "gcode_macro SEARCH_VARS": null, "gcode_macro CALIBRATE": null, "gcode_macro _FLOW_CALIB_VARIABLES": null, "gcode_macro FLOW_MULTIPLIER_CALIBRATION": null, "gcode_macro COMPUTE_FLOW_MULTIPLIER": null, "gcode_macro PRESSURE_ADVANCE_CALIBRATION": null, "gcode_macro M486": null, "gcode_macro M701": null, "gcode_macro M702": null, "gcode_macro M125": null, "gcode_macro M900": null, "gcode_macro M204": null, "gcode_macro M117": null, "gcode_macro M808": null, "neopixel sb_leds": null, "gcode_macro _sb_vars": null, "gcode_macro _set_sb_leds": null, "gcode_macro _set_sb_leds_by_name": null, "gcode_macro _set_logo_leds": null, "gcode_macro _set_nozzle_leds": null, "gcode_macro set_logo_leds_off": null, "gcode_macro set_nozzle_leds_on": null, "gcode_macro set_nozzle_leds_off": null, "gcode_macro status_off": null, "gcode_macro status_ready": null, "gcode_macro status_busy": null, "gcode_macro status_heating": null, "gcode_macro status_leveling": null, "gcode_macro status_homing": null, "gcode_macro status_cleaning": null, "gcode_macro status_meshing": null, "gcode_macro status_calibrating_z": null, "gcode_macro status_printing": null, "pause_resume": null, "filament_motion_sensor filament_sensor": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro RESONANCES_TEST": null, "gcode_macro DUMP_PARAMETERS": null, "gcode_macro TEST_SPEED": null, "gcode_macro FEED_RATE_TEST": null, "gcode_macro _X_TEST": null, "gcode_macro _Y_TEST": null, "gcode_macro _RECT_TEST": null, "gcode_macro _DIAG_TEST": null, "gcode_macro _CIRCLE_TEST": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro TOGGLE_BEEPER": null, "gcode_macro SONG_SINGLE_BEEP": null, "output_pin beeper": null, "gcode_macro M300": null, "gcode_macro SONG_THUNDERSTRUCK": null, "gcode_macro SONG_AFRICA": null, "gcode_macro SONG_STARWARS_IMP": null, "gcode_macro SONG_ALLIWANT": null, "gcode_macro SONG_MACGYVER": null, "gcode_macro SONG_TAKEONME": null, "gcode_macro SONG_DUCKTOY": null, "gcode_macro SONG_LOONEY": null, "gcode_macro SONG_RICE_COOKER_DONE": null, "gcode_macro Song_Futurama1": null, "gcode_macro Song_Futurama2": null, "gcode_macro Song_Mario": null, "gcode_macro Song_Mario2": null, "gcode_macro Song_Doom": null, "gcode_macro Song_Simpsons": null, "gcode_macro Song_Centerfold": null, "gcode_macro Song_GanstaParadise": null, "gcode_macro Song_Naruto": null, "gcode_macro Song_StillAlive": null, "gcode_macro Song_OnlineSong": null, "gcode_macro _ADD_PRINT_TIME": null, "gcode_macro _DISPLAY_PRINT_TIME": null, "gcode_macro _SD_PRINT_STATS": null, "gcode_macro _SD_PRINTER_STATS": null, "gcode_macro _CHECK_FILTER": null, "gcode_macro RST_FILTER": null, "gcode_macro RST_SERVICE": null, "save_variables": null, "gcode_macro _EXECUTE_AT_INIT": null, "gcode_macro _CHECK_CONSITENT": null, "gcode_macro _USER_VARIABLE": null, "gcode_macro AXES_SHAPER_CALIBRATION": null, "gcode_macro BELTS_SHAPER_CALIBRATION": null, "gcode_macro VIBRATIONS_CALIBRATION": null, "neopixel lcd": null, "gcode_macro LCDRGB": null, "gcode_macro RESETRGB": null, "exclude_object": null, "idle_timeout": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "tmc2209 stepper_z2": null, "tmc2209 extruder": null, "probe": null, "z_tilt": null, "bed_mesh": null, "output_pin light": null, "gcode_macro light_off": null, "gcode_macro light_dim": null, "gcode_macro light_on": null, "temperature_host raspberry_pi": null, "motion_report": null, "system_stats": null, "manual_probe": null}, "response_template": {"method": "process_status_update"}}}
Received 412.238354: {"id": 1748457968, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "temperature_sensor raspberry_pi": null, "temperature_sensor mcu_temp": null, "temperature_sensor chamber": null, "extruder": null, "display_status": null, "toolhead": null, "gcode_move": null, "virtual_sdcard": null, "configfile": null, "mcu": null, "mcu rpi": null, "gcode_macro HELLO_WORLD": null, "gcode_macro GET_TIMELAPSE_SETUP": null, "gcode_macro _SET_TIMELAPSE_SETUP": null, "gcode_macro TIMELAPSE_TAKE_FRAME": null, "gcode_macro _TIMELAPSE_NEW_FRAME": null, "gcode_macro HYPERLAPSE": null, "gcode_macro TIMELAPSE_RENDER": null, "gcode_macro TEST_STREAM_DELAY": null, "gcode_macro clean_nozzle": null, "gcode_macro G32": null, "gcode_macro CG28": null, "gcode_macro XYCG28": null, "gcode_macro ZCG28": null, "gcode_macro M109": null, "gcode_macro CALIBRATE_Z": null, "gcode_macro SHUTDOWN": null, "gcode_macro REBOOT": null, "gcode_macro _bot_data": null, "gcode_macro BACKUP_CFG": null, "gcode_macro COOLDOWN": null, "gcode_macro RESETSPEEDS": null, "gcode_macro BEEP": null, "gcode_macro DIRECT_MOVE": null, "gcode_macro _PRINT_AR": null, "gcode_macro M115": null, "gcode_macro bedfanvars": null, "fan_generic BedFans": null, "gcode_macro BedFansSlow": null, "gcode_macro BedFansFast": null, "gcode_macro BedFansOff": null, "gcode_macro SET_HEATER_TEMPERATURE": null, "gcode_macro M190": null, "gcode_macro M140": null, "gcode_macro TURN_OFF_HEATERS": null, "query_endstops": null, "z_calibration": null, "gcode_macro _User_Variables": null, "gcode_macro _Probe_Variables": null, "gcode_macro _klicky_check_variables_version": null, "gcode_macro _KlickyDebug": null, "gcode_macro _exit_point": null, "gcode_macro _entry_point": null, "gcode_macro _Homing_Variables": null, "gcode_macro Attach_Probe_Lock": null, "gcode_macro Dock_Probe_Unlock": null, "gcode_macro _Probe_Unlock": null, "gcode_macro _Probe_Lock": null, "gcode_macro _DeployKlickyDock": null, "gcode_macro _RetractKlickyDock": null, "gcode_macro Attach_Probe": null, "gcode_macro Dock_Probe": null, "gcode_macro PROBE_CALIBRATE": null, "gcode_macro PROBE_ACCURACY": null, "gcode_macro _Umbilical_Path": null, "gcode_macro _Home_Z": null, "gcode_macro _CheckProbe": null, "gcode_macro _SetProbeState": null, "gcode_macro _Park_Toolhead": null, "gcode_macro _klicky_status_ready": null, "gcode_macro _klicky_status_busy": null, "gcode_macro _klicky_status_leveling": null, "gcode_macro _klicky_status_homing": null, "gcode_macro _klicky_status_cleaning": null, "gcode_macro _klicky_status_meshing": null, "gcode_macro _klicky_status_calibrating_z": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro Z_TILT_ADJUST": null, "gcode_macro HEATSOAK_CHAMBER": null, "gcode_macro _WAIT_CHAMBER_TEMP": null, "gcode_macro HEATSOAK_BED": null, "heaters": null, "heater_fan hotend_fan": null, "fan": null, "controller_fan controller_fan": null, "fan_generic exhaust_fan": null, "gcode_macro _LOW_TEMP_CHECK": null, "gcode_macro CHANGE_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro TIP_SHAPING": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro _ADAPTIVE_MESH_VARIABLES": null, "gcode_macro COMPUTE_MESH_PARAMETERS": null, "gcode_macro ADAPTIVE_BED_MESH": null, "gcode_macro _DO_ADAPTIVE_MESH": null, "gcode_macro SEARCH_VARS": null, "gcode_macro CALIBRATE": null, "gcode_macro _FLOW_CALIB_VARIABLES": null, "gcode_macro FLOW_MULTIPLIER_CALIBRATION": null, "gcode_macro COMPUTE_FLOW_MULTIPLIER": null, "gcode_macro PRESSURE_ADVANCE_CALIBRATION": null, "gcode_macro M486": null, "gcode_macro M701": null, "gcode_macro M702": null, "gcode_macro M125": null, "gcode_macro M900": null, "gcode_macro M204": null, "gcode_macro M117": null, "gcode_macro M808": null, "neopixel sb_leds": null, "gcode_macro _sb_vars": null, "gcode_macro _set_sb_leds": null, "gcode_macro _set_sb_leds_by_name": null, "gcode_macro _set_logo_leds": null, "gcode_macro _set_nozzle_leds": null, "gcode_macro set_logo_leds_off": null, "gcode_macro set_nozzle_leds_on": null, "gcode_macro set_nozzle_leds_off": null, "gcode_macro status_off": null, "gcode_macro status_ready": null, "gcode_macro status_busy": null, "gcode_macro status_heating": null, "gcode_macro status_leveling": null, "gcode_macro status_homing": null, "gcode_macro status_cleaning": null, "gcode_macro status_meshing": null, "gcode_macro status_calibrating_z": null, "gcode_macro status_printing": null, "pause_resume": null, "filament_motion_sensor filament_sensor": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro RESONANCES_TEST": null, "gcode_macro DUMP_PARAMETERS": null, "gcode_macro TEST_SPEED": null, "gcode_macro FEED_RATE_TEST": null, "gcode_macro _X_TEST": null, "gcode_macro _Y_TEST": null, "gcode_macro _RECT_TEST": null, "gcode_macro _DIAG_TEST": null, "gcode_macro _CIRCLE_TEST": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro TOGGLE_BEEPER": null, "gcode_macro SONG_SINGLE_BEEP": null, "output_pin beeper": null, "gcode_macro M300": null, "gcode_macro SONG_THUNDERSTRUCK": null, "gcode_macro SONG_AFRICA": null, "gcode_macro SONG_STARWARS_IMP": null, "gcode_macro SONG_ALLIWANT": null, "gcode_macro SONG_MACGYVER": null, "gcode_macro SONG_TAKEONME": null, "gcode_macro SONG_DUCKTOY": null, "gcode_macro SONG_LOONEY": null, "gcode_macro SONG_RICE_COOKER_DONE": null, "gcode_macro Song_Futurama1": null, "gcode_macro Song_Futurama2": null, "gcode_macro Song_Mario": null, "gcode_macro Song_Mario2": null, "gcode_macro Song_Doom": null, "gcode_macro Song_Simpsons": null, "gcode_macro Song_Centerfold": null, "gcode_macro Song_GanstaParadise": null, "gcode_macro Song_Naruto": null, "gcode_macro Song_StillAlive": null, "gcode_macro Song_OnlineSong": null, "gcode_macro _ADD_PRINT_TIME": null, "gcode_macro _DISPLAY_PRINT_TIME": null, "gcode_macro _SD_PRINT_STATS": null, "gcode_macro _SD_PRINTER_STATS": null, "gcode_macro _CHECK_FILTER": null, "gcode_macro RST_FILTER": null, "gcode_macro RST_SERVICE": null, "save_variables": null, "gcode_macro _EXECUTE_AT_INIT": null, "gcode_macro _CHECK_CONSITENT": null, "gcode_macro _USER_VARIABLE": null, "gcode_macro AXES_SHAPER_CALIBRATION": null, "gcode_macro BELTS_SHAPER_CALIBRATION": null, "gcode_macro VIBRATIONS_CALIBRATION": null, "neopixel lcd": null, "gcode_macro LCDRGB": null, "gcode_macro RESETRGB": null, "exclude_object": null, "idle_timeout": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 stepper_z1": null, "tmc2209 stepper_z2": null, "tmc2209 extruder": null, "probe": null, "z_tilt": null, "bed_mesh": null, "output_pin light": null, "gcode_macro light_off": null, "gcode_macro light_dim": null, "gcode_macro light_on": null, "temperature_host raspberry_pi": null, "motion_report": null, "system_stats": null, "manual_probe": null}, "response_template": {"method": "process_status_update"}}}
Received 457.982213: {"id": 1748842000, "method": "gcode/script", "params": {"script": "G28"}}
Received 482.079314: {"id": 1748843184, "method": "gcode/script", "params": {"script": "parkbed"}}
Received 486.809707: {"id": 1748842480, "method": "gcode/script", "params": {"script": "G91\nG1 Z+25 F1500\nG90"}}
Received 492.956194: {"id": 1748841264, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=220"}}
Received 619.291112: {"id": 1748840848, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0"}}
Received 776.400461: {"id": 1748843920, "method": "gcode/script", "params": {"script": "M84"}}
Received 2209.670681: {"id": 1749217488, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60"}}
Received 2212.703192: {"id": 1749217584, "method": "gcode/script", "params": {"script": "g32"}}
Received 2278.227430: {"id": 1748933904, "method": "gcode/script", "params": {"script": "G91\nG1 Z+25 F1500\nG90"}}
Received 2877.331878: {"id": 1748472432, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=220"}}
Received 3397.081118: {"id": 1749134608, "method": "gcode/script", "params": {"script": "SDCARD_PRINT_FILE FILENAME=\"Spoiler thing final-155.44g-9h32m.gcode\""}}
Virtual sdcard (2224005): u'7.655 Y102.584 E.00241\nG1 X147.586 Y102.861 E.0058\nG1 X147.497 Y102.772 E.00256\nG1 X147.418 Y103.038 E.00565\nG1 X147.517 Y103.137 E.00284\nG1 X147.433 Y103.398 E.00558\nG1 X147.336 Y103.301 E.00279\nG1 X147.253 Y103.564 E.0056\nG1 X147.349 Y103.66 E.00275\nG1 X147.261 Y103.918 E.00554\nG1 X147.168 Y103.824 E.0027\nG1 X147.078 Y104.08 E.00551\nG1 X147.168 Y104.17 E.00258\nG1 X147.074 Y104.422 E.00546\nG1 X146.988 Y104.336 E.00247\nG1 X146.899 Y104.592 E.00551\nG1 X146.981 Y104.674 E.00236\nG1 X146.884 Y104.923 E.00542\nG1 X146.725 Y104.764 E.00455\nM204 S10000\nG1 X97.559 Y117.667 F27000\nM204 S4000\n;WIDTH:0.301365\nG1 F6676\nG1 X97.222 Y117.33 E.01022\nG1 X96.638 Y117.112 E.01341\nG1 X96.834 Y117.308 E.00595\nG1 X96.222 Y117.061 E.01417\nG1 X95.987 Y116.826 E.00716\nG1 X95.484 Y116.591 E.01191\nG1 X95.239 Y116.443 E.00616\nG1 X95.553 Y116.758 E.00956\nG1 X95.163 Y116.557 E.00944\nG1 X94.711 Y116.281 E.01137\nG1 X93.962 Y115.532 E.02278\nM204 S10000\nG1 X91.941 Y113.648 F27000\nM204 S4000\n;WIDTH:0.311031\nG1 F6676\nG1 X91.071 Y112.777 E.02745\n'
Upcoming (2225029): u'G1 X91.345 Y113.237 E.01194\nG1 X91.696 Y113.73 E.01348\nG1 X91.975 Y114.06 E.00965\nG1 X93.317 Y115.402 E.04231\nM204 S10000\nG1 X89'
gcode state: absolute_coord=True absolute_extrude=False base_position=[0.0, 0.0, -0.7327500000460798, 2667.04851000007] last_position=[91.345, 113.237, 9.10724999995392, 2700.6263000000786] homing_position=[0.0, 0.0, -0.7327500000460798, 0.0] speed_factor=0.0166666666667 extrude_factor=1.0 speed=111.266666667
Reactor garbage collection: (5392.094626901, 5233.577024149, 0.0)
Dumping stepper 'stepper_z' (mcu) 1 queue_step:
queue_step 0: t=996523170876 p=-25422 i=41252396 c=-1 a=0
Dumping stepper 'stepper_y' (mcu) 2 queue_step:
queue_step 0: t=996471893396 p=-2883 i=7150 c=6326 a=0
queue_step 1: t=996517124295 p=3443 i=7149 c=3729 a=0
Dumping stepper 'stepper_z2' (mcu) 1 queue_step:
queue_step 0: t=996523170876 p=-25421 i=41252396 c=-1 a=0
Dumping stepper 'stepper_z1' (mcu) 1 queue_step:
queue_step 0: t=996523170876 p=-25353 i=41252396 c=-1 a=0
Dumping stepper 'extruder' (mcu) 1 queue_step:
queue_step 0: t=996477516242 p=3072866 i=53814 c=1231 a=0
Dumping trapq 'toolhead' 1 moves:
move 0: pt=5535.944078 mt=0.500993 sv=111.266667 a=0.000000 sp=(101.069229,117.025771,9.107119) ar=(0.707107,-0.707107,-0.000025)
Dumping trapq 'extruder' 1 moves:
move 0: pt=5535.944078 mt=0.500993 sv=2.933541 a=0.000000 sp=(2694.759035,0.040725,0.000000) ar=(1.000000,1.000000,0.000000)
Requested toolhead position at shutdown time 5536.150250: (117.29031823794554, 100.80468176205446, 9.106556816803291)
MCU 'rpi' shutdown: Command request
clocksync state: mcu_freq=50000000 last_clock=256999672182 clock_est=(5506.314 255563903426 49999657.925) min_half_rtt=0.000056 min_rtt_time=5162.336 time_avg=5506.313(853.495) clock_avg=255563903426.268(42674475636.603) pred_variance=2893273.527 clock_adj=(396.176 49999370.690)
Dumping serial stats: bytes_write=31882 bytes_read=100133 bytes_retransmit=0 bytes_invalid=0 send_seq=5288 receive_seq=5288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0
Dumping send queue 100 messages
Sent 0 5438.140621 5438.140621 6: seq: 14, get_clock
Sent 1 5439.125775 5439.125775 6: seq: 15, get_clock
Sent 2 5440.109685 5440.109685 6: seq: 16, get_clock
Sent 3 5441.094487 5441.094487 6: seq: 17, get_clock
Sent 4 5442.079585 5442.079585 6: seq: 18, get_clock
Sent 5 5443.064511 5443.064511 6: seq: 19, get_clock
Sent 6 5444.049345 5444.049345 6: seq: 1a, get_clock
Sent 7 5445.033514 5445.033514 6: seq: 1b, get_clock
Sent 8 5446.018124 5446.018124 6: seq: 1c, get_clock
Sent 9 5447.003226 5447.003226 6: seq: 1d, get_clock
Sent 10 5447.988086 5447.988086 6: seq: 1e, get_clock
Sent 11 5448.973147 5448.973147 6: seq: 1f, get_clock
Sent 12 5449.957633 5449.957633 6: seq: 10, get_clock
Sent 13 5450.942099 5450.942099 6: seq: 11, get_clock
Sent 14 5451.985824 5451.985824 6: seq: 12, get_clock
Sent 15 5452.971153 5452.971153 6: seq: 13, get_clock
Sent 16 5453.955629 5453.955629 6: seq: 14, get_clock
Sent 17 5454.940763 5454.940763 6: seq: 15, get_clock
Sent 18 5455.925571 5455.925571 6: seq: 16, get_clock
Sent 19 5456.910278 5456.910278 6: seq: 17, get_clock
Sent 20 5457.895101 5457.895101 6: seq: 18, get_clock
Sent 21 5458.879207 5458.879207 6: seq: 19, get_clock
Sent 22 5459.863946 5459.863946 6: seq: 1a, get_clock
Sent 23 5460.852970 5460.852970 6: seq: 1b, get_clock
Sent 24 5461.837712 5461.837712 6: seq: 1c, get_clock
Sent 25 5462.821214 5462.821214 6: seq: 1d, get_clock
Sent 26 5463.805931 5463.805931 6: seq: 1e, get_clock
Sent 27 5464.790532 5464.790532 6: seq: 1f, get_clock
Sent 28 5465.774955 5465.774955 6: seq: 10, get_clock
Sent 29 5466.760001 5466.760001 6: seq: 11, get_clock
Sent 30 5467.744782 5467.744782 6: seq: 12, get_clock
Sent 31 5468.736009 5468.736009 6: seq: 13, get_clock
Sent 32 5469.720374 5469.720374 6: seq: 14, get_clock
Sent 33 5470.705120 5470.705120 6: seq: 15, get_clock
Sent 34 5471.689396 5471.689396 6: seq: 16, get_clock
Sent 35 5472.674492 5472.674492 6: seq: 17, get_clock
Sent 36 5473.658580 5473.658580 6: seq: 18, get_clock
Sent 37 5474.643404 5474.643404 6: seq: 19, get_clock
Sent 38 5475.629076 5475.629076 6: seq: 1a, get_clock
Sent 39 5476.612525 5476.612525 6: seq: 1b, get_clock
Sent 40 5477.597605 5477.597605 6: seq: 1c, get_clock
Sent 41 5478.588315 5478.588315 6: seq: 1d, get_clock
Sent 42 5479.572806 5479.572806 6: seq: 1e, get_clock
Sent 43 5480.557433 5480.557433 6: seq: 1f, get_clock
Sent 44 5481.541664 5481.541664 6: seq: 10, get_clock
Sent 45 5482.526293 5482.526293 6: seq: 11, get_clock
Sent 46 5483.511442 5483.511442 6: seq: 12, get_clock
Sent 47 5484.496372 5484.496372 6: seq: 13, get_clock
Sent 48 5485.497316 5485.497316 6: seq: 14, get_clock
Sent 49 5486.482034 5486.482034 6: seq: 15, get_clock
Sent 50 5487.466272 5487.466272 6: seq: 16, get_clock
Sent 51 5488.451205 5488.451205 6: seq: 17, get_clock
Sent 52 5489.436239 5489.436239 6: seq: 18, get_clock
Sent 53 5490.499400 5490.499400 6: seq: 19, get_clock
Sent 54 5491.483548 5491.483548 6: seq: 1a, get_clock
Sent 55 5492.467698 5492.467698 6: seq: 1b, get_clock
Sent 56 5493.452331 5493.452331 6: seq: 1c, get_clock
Sent 57 5494.436125 5494.436125 6: seq: 1d, get_clock
Sent 58 5495.420874 5495.420874 6: seq: 1e, get_clock
Sent 59 5496.405166 5496.405166 6: seq: 1f, get_clock
Sent 60 5497.390068 5497.390068 6: seq: 10, get_clock
Sent 61 5498.374290 5498.374290 6: seq: 11, get_clock
Sent 62 5499.363177 5499.363177 6: seq: 12, get_clock
Sent 63 5500.347776 5500.347776 6: seq: 13, get_clock
Sent 64 5501.331878 5501.331878 6: seq: 14, get_clock
Sent 65 5502.316522 5502.316522 6: seq: 15, get_clock
Sent 66 5503.325962 5503.325962 6: seq: 16, get_clock
Sent 67 5504.314072 5504.314072 6: seq: 17, get_clock
Sent 68 5505.356313 5505.356313 6: seq: 18, get_clock
Sent 69 5506.341089 5506.341089 6: seq: 19, get_clock
Sent 70 5507.325735 5507.325735 6: seq: 1a, get_clock
Sent 71 5508.309602 5508.309602 6: seq: 1b, get_clock
Sent 72 5509.293776 5509.293776 6: seq: 1c, get_clock
Sent 73 5510.278744 5510.278744 6: seq: 1d, get_clock
Sent 74 5511.263022 5511.263022 6: seq: 1e, get_clock
Sent 75 5512.247853 5512.247853 6: seq: 1f, get_clock
Sent 76 5513.233018 5513.233018 6: seq: 10, get_clock
Sent 77 5514.217995 5514.217995 6: seq: 11, get_clock
Sent 78 5515.202740 5515.202740 6: seq: 12, get_clock
Sent 79 5516.187388 5516.187388 6: seq: 13, get_clock
Sent 80 5517.172494 5517.172494 6: seq: 14, get_clock
Sent 81 5518.156943 5518.156943 6: seq: 15, get_clock
Sent 82 5519.142341 5519.142341 6: seq: 16, get_clock
Sent 83 5520.127041 5520.127041 6: seq: 17, get_clock
Sent 84 5521.118726 5521.118726 6: seq: 18, get_clock
Sent 85 5522.103303 5522.103303 6: seq: 19, get_clock
Sent 86 5523.105471 5523.105471 6: seq: 1a, get_clock
Sent 87 5524.090114 5524.090114 6: seq: 1b, get_clock
Sent 88 5525.074698 5525.074698 6: seq: 1c, get_clock
Sent 89 5526.166322 5526.166322 6: seq: 1d, get_clock
Sent 90 5527.151056 5527.151056 6: seq: 1e, get_clock
Sent 91 5528.135976 5528.135976 6: seq: 1f, get_clock
Sent 92 5529.120563 5529.120563 6: seq: 10, get_clock
Sent 93 5530.105030 5530.105030 6: seq: 11, get_clock
Sent 94 5531.089343 5531.089343 6: seq: 12, get_clock
Sent 95 5532.075232 5532.075232 6: seq: 13, get_clock
Sent 96 5533.059555 5533.059555 6: seq: 14, get_clock
Sent 97 5534.044053 5534.044053 6: seq: 15, get_clock
Sent 98 5535.029011 5535.029011 6: seq: 16, get_clock
Sent 99 5535.052666 5535.052666 6: seq: 17, emergency_stop
Dumping receive queue 100 messages
Receive: 0 5453.955842 5453.955629 11: seq: 15, clock clock=3837926609
Receive: 1 5454.940956 5454.940763 11: seq: 16, clock clock=3887183026
Receive: 2 5455.925835 5455.925571 11: seq: 17, clock clock=3936425170
Receive: 3 5456.335494 5455.925571 13: seq: 17, stats count=55 sum=24483 sumsq=147931
Receive: 4 5456.910558 5456.910278 11: seq: 18, clock clock=3985661712
Receive: 5 5457.895320 5457.895101 11: seq: 19, clock clock=4034899979
Receive: 6 5458.879435 5458.879207 11: seq: 1a, clock clock=4084104276
Receive: 7 5459.864158 5459.863946 11: seq: 1b, clock clock=4133340608
Receive: 8 5460.853320 5460.852970 11: seq: 1c, clock clock=4182794331
Receive: 9 5461.435476 5460.852970 13: seq: 1c, stats count=56 sum=28136 sumsq=179030
Receive: 10 5461.837952 5461.837712 10: seq: 1d, clock clock=4232029361
Receive: 11 5462.821489 5462.821214 10: seq: 1e, clock clock=4281204732
Receive: 12 5463.806117 5463.805931 10: seq: 1f, clock clock=35470874
Receive: 13 5464.790832 5464.790532 10: seq: 10, clock clock=84702915
Receive: 14 5465.775164 5465.774955 10: seq: 11, clock clock=133921952
Receive: 15 5466.535407 5465.774955 13: seq: 11, stats count=56 sum=25375 sumsq=152765
Receive: 16 5466.760232 5466.760001 10: seq: 12, clock clock=183174596
Receive: 17 5467.744937 5467.744782 11: seq: 13, clock clock=232411027
Receive: 18 5468.736241 5468.736009 11: seq: 14, clock clock=281974445
Receive: 19 5469.720538 5469.720374 11: seq: 15, clock clock=331190467
Receive: 20 5470.705438 5470.705120 11: seq: 16, clock clock=380431877
Receive: 21 5471.535530 5470.705120 13: seq: 16, stats count=55 sum=24952 sumsq=191610
Receive: 22 5471.689675 5471.689396 11: seq: 17, clock clock=429644717
Receive: 23 5472.674660 5472.674492 11: seq: 18, clock clock=478895531
Receive: 24 5473.658867 5473.658580 11: seq: 19, clock clock=528103941
Receive: 25 5474.643668 5474.643404 11: seq: 1a, clock clock=577341362
Receive: 26 5475.629232 5475.629076 11: seq: 1b, clock clock=626623350
Receive: 27 5476.612717 5476.612525 11: seq: 1c, clock clock=675796078
Receive: 28 5476.612735 5476.612525 13: seq: 1c, stats count=56 sum=25433 sumsq=144561
Receive: 29 5477.598152 5477.597605 11: seq: 1d, clock clock=725056556
Receive: 30 5478.588624 5478.588315 11: seq: 1e, clock clock=774588582
Receive: 31 5479.573060 5479.572806 11: seq: 1f, clock clock=823811602
Receive: 32 5480.557675 5480.557433 11: seq: 10, clock clock=873041835
Receive: 33 5481.541852 5481.541664 11: seq: 11, clock clock=922251253
Receive: 34 5481.635500 5481.541664 13: seq: 11, stats count=56 sum=25792 sumsq=170442
Receive: 35 5482.526452 5482.526293 11: seq: 12, clock clock=971481192
Receive: 36 5483.511595 5483.511442 11: seq: 13, clock clock=1020738027
Receive: 37 5484.496541 5484.496372 11: seq: 14, clock clock=1069985547
Receive: 38 5485.497489 5485.497316 11: seq: 15, clock clock=1120032694
Receive: 39 5486.482223 5486.482034 11: seq: 16, clock clock=1169267631
Receive: 40 5486.635633 5486.482034 13: seq: 16, stats count=55 sum=20512 sumsq=85869
Receive: 41 5487.466512 5487.466272 11: seq: 17, clock clock=1218481531
Receive: 42 5488.451346 5488.451205 11: seq: 18, clock clock=1267724911
Receive: 43 5489.436438 5489.436239 11: seq: 19, clock clock=1316976657
Receive: 44 5490.499593 5490.499400 11: seq: 1a, clock clock=1370134794
Receive: 45 5491.483691 5491.483548 11: seq: 1b, clock clock=1419340934
Receive: 46 5491.735639 5491.483548 13: seq: 1b, stats count=56 sum=22915 sumsq=106067
Receive: 47 5492.467842 5492.467698 11: seq: 1c, clock clock=1468547554
Receive: 48 5493.452576 5493.452331 11: seq: 1d, clock clock=1517782212
Receive: 49 5494.436262 5494.436125 11: seq: 1e, clock clock=1566968696
Receive: 50 5495.421093 5495.420874 11: seq: 1f, clock clock=1616208513
Receive: 51 5496.405328 5496.405166 11: seq: 10, clock clock=1665420888
Receive: 52 5496.835613 5496.405166 13: seq: 10, stats count=56 sum=23072 sumsq=114731
Receive: 53 5497.390298 5497.390068 11: seq: 11, clock clock=1714668020
Receive: 54 5498.374506 5498.374290 11: seq: 12, clock clock=1763878335
Receive: 55 5499.363377 5499.363177 11: seq: 13, clock clock=1813321359
Receive: 56 5500.347932 5500.347776 11: seq: 14, clock clock=1862550096
Receive: 57 5501.332016 5501.331878 11: seq: 15, clock clock=1911754455
Receive: 58 5501.835654 5501.331878 13: seq: 15, stats count=55 sum=22207 sumsq=112430
Receive: 59 5502.316663 5502.316522 11: seq: 16, clock clock=1960986376
Receive: 60 5503.326289 5503.325962 11: seq: 17, clock clock=2011465037
Receive: 61 5504.314329 5504.314072 11: seq: 18, clock clock=2060865733
Receive: 62 5505.356501 5505.356313 11: seq: 19, clock clock=2112975584
Receive: 63 5506.341299 5506.341089 11: seq: 1a, clock clock=2162215138
Receive: 64 5506.835782 5506.341089 13: seq: 1a, stats count=55 sum=24688 sumsq=151053
Receive: 65 5507.325977 5507.325735 11: seq: 1b, clock clock=2211448351
Receive: 66 5508.309742 5508.309602 11: seq: 1c, clock clock=2260638443
Receive: 67 5509.293972 5509.293776 11: seq: 1d, clock clock=2309848307
Receive: 68 5510.279049 5510.278744 11: seq: 1e, clock clock=2359099075
Receive: 69 5511.263262 5511.263022 11: seq: 1f, clock clock=2408310917
Receive: 70 5511.935713 5511.263022 13: seq: 1f, stats count=56 sum=28906 sumsq=197498
Receive: 71 5512.247980 5512.247853 11: seq: 10, clock clock=2457548878
Receive: 72 5513.233310 5513.233018 11: seq: 11, clock clock=2506810961
Receive: 73 5514.218256 5514.217995 11: seq: 12, clock clock=2556058562
Receive: 74 5515.203009 5515.202740 11: seq: 13, clock clock=2605297997
Receive: 75 5516.187595 5516.187388 11: seq: 14, clock clock=2654526844
Receive: 76 5517.035728 5516.187388 13: seq: 14, stats count=56 sum=26971 sumsq=185814
Receive: 77 5517.172688 5517.172494 11: seq: 15, clock clock=2703782315
Receive: 78 5518.157108 5518.156943 11: seq: 16, clock clock=2753002188
Receive: 79 5519.142550 5519.142341 11: seq: 17, clock clock=2802273216
Receive: 80 5520.127202 5520.127041 11: seq: 18, clock clock=2851507394
Receive: 81 5521.118955 5521.118726 11: seq: 19, clock clock=2901091043
Receive: 82 5522.035781 5521.118726 13: seq: 19, stats count=55 sum=21482 sumsq=99961
Receive: 83 5522.103451 5522.103303 11: seq: 1a, clock clock=2950319113
Receive: 84 5523.105722 5523.105471 11: seq: 1b, clock clock=3000428144
Receive: 85 5524.090390 5524.090114 11: seq: 1c, clock clock=3049661564
Receive: 86 5525.074884 5525.074698 11: seq: 1d, clock clock=3098888022
Receive: 87 5526.166470 5526.166322 11: seq: 1e, clock clock=3153468091
Receive: 88 5527.035830 5526.166322 13: seq: 1e, stats count=55 sum=25659 sumsq=191928
Receive: 89 5527.151232 5527.151056 11: seq: 1f, clock clock=3202704310
Receive: 90 5528.136104 5528.135976 11: seq: 10, clock clock=3251949662
Receive: 91 5529.120701 5529.120563 11: seq: 11, clock clock=3301179001
Receive: 92 5530.105208 5530.105030 11: seq: 12, clock clock=3350402783
Receive: 93 5531.089561 5531.089343 11: seq: 13, clock clock=3399620109
Receive: 94 5532.036003 5531.089343 13: seq: 13, stats count=55 sum=21666 sumsq=93233
Receive: 95 5532.075503 5532.075232 11: seq: 14, clock clock=3448914005
Receive: 96 5533.059796 5533.059555 11: seq: 15, clock clock=3498129980
Receive: 97 5534.044314 5534.044053 11: seq: 16, clock clock=3547356494
Receive: 98 5535.029197 5535.029011 11: seq: 17, clock clock=3596601718
Receive: 99 5535.053078 5535.052666 12: seq: 18, shutdown clock=3597790622 static_string_id=Command request
Stats 5535.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9269289 bytes_read=2804130 bytes_retransmit=0 bytes_invalid=0 send_seq=191084 receive_seq=191084 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001358 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31882 bytes_read=100133 bytes_retransmit=0 bytes_invalid=0 send_seq=5288 receive_seq=5288 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999657 adj=49999370 sd_pos=2225029 heater_bed: target=60 temp=60.0 pwm=0.073 raspberry_pi: temp=42.9 mcu_temp: temp=38.4 chamber: temp=28.6 sysload=1.21 cputime=788.423 memavail=693840 print_time=5538.691 buffer_time=2.401 print_stall=0 extruder: target=220 temp=220.1 pwm=0.613
Exiting SD card print (position 2225057)
Stats 5536.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9269436 bytes_read=2804437 bytes_retransmit=0 bytes_invalid=0 send_seq=191091 receive_seq=191091 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001354 rpi: mcu_awake=0.000 mcu_task_avg=0.000008 mcu_task_stddev=0.000011 bytes_write=31888 bytes_read=100149 bytes_retransmit=0 bytes_invalid=0 send_seq=5289 receive_seq=5289 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999661 adj=49999160  heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=42.4 mcu_temp: temp=38.1 chamber: temp=28.8 sysload=1.21 cputime=788.518 memavail=693840 print_time=5538.691 buffer_time=1.400 print_stall=0 extruder: target=220 temp=219.8 pwm=0.613
Stats 5537.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9270235 bytes_read=2805377 bytes_retransmit=0 bytes_invalid=0 send_seq=191110 receive_seq=191110 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001372 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=31894 bytes_read=100178 bytes_retransmit=0 bytes_invalid=0 send_seq=5290 receive_seq=5290 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999207  heater_bed: target=60 temp=59.9 pwm=0.194 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.7 sysload=1.19 cputime=788.615 memavail=693404 print_time=5538.711 buffer_time=0.420 print_stall=0 extruder: target=220 temp=219.2 pwm=0.799
Stats 5538.1: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000011 mcu_task_stddev=0.000014 bytes_write=9270509 bytes_read=2805855 bytes_retransmit=0 bytes_invalid=0 send_seq=191121 receive_seq=191121 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001360 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=31900 bytes_read=100194 bytes_retransmit=0 bytes_invalid=0 send_seq=5291 receive_seq=5291 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999667 adj=49999253  heater_bed: target=60 temp=59.8 pwm=0.194 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.7 sysload=1.19 cputime=788.698 memavail=693160 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=217.6 pwm=0.989
Stats 5539.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=9270850 bytes_read=2806378 bytes_retransmit=0 bytes_invalid=0 send_seq=191131 receive_seq=191131 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001357 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=31906 bytes_read=100210 bytes_retransmit=0 bytes_invalid=0 send_seq=5292 receive_seq=5292 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999668 adj=49999263  heater_bed: target=60 temp=59.7 pwm=0.280 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.7 sysload=1.19 cputime=788.786 memavail=693156 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=216.1 pwm=0.989
Stats 5540.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=9271035 bytes_read=2806801 bytes_retransmit=0 bytes_invalid=0 send_seq=191139 receive_seq=191139 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001379 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=31912 bytes_read=100226 bytes_retransmit=0 bytes_invalid=0 send_seq=5293 receive_seq=5293 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999669 adj=49999292  heater_bed: target=60 temp=59.6 pwm=0.280 raspberry_pi: temp=42.9 mcu_temp: temp=38.2 chamber: temp=28.6 sysload=1.19 cputime=788.876 memavail=692736 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=214.4 pwm=0.989
Stats 5541.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=9271253 bytes_read=2807234 bytes_retransmit=0 bytes_invalid=0 send_seq=191148 receive_seq=191148 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001370 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=31918 bytes_read=100242 bytes_retransmit=0 bytes_invalid=0 send_seq=5294 receive_seq=5294 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999670 adj=49999201  heater_bed: target=60 temp=59.5 pwm=0.342 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.5 sysload=1.19 cputime=788.966 memavail=692736 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=212.0 pwm=0.989
Stats 5542.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=9271562 bytes_read=2807770 bytes_retransmit=0 bytes_invalid=0 send_seq=191158 receive_seq=191158 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001364 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000019 bytes_write=31924 bytes_read=100258 bytes_retransmit=0 bytes_invalid=0 send_seq=5295 receive_seq=5295 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999672 adj=49999271  heater_bed: target=60 temp=59.4 pwm=0.342 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=28.5 sysload=1.17 cputime=789.075 memavail=692916 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=210.1 pwm=1.000
Stats 5543.1: gcodein=0  mcu: mcu_awake=0.006 mcu_task_avg=0.000009 mcu_task_stddev=0.000012 bytes_write=9271763 bytes_read=2808205 bytes_retransmit=0 bytes_invalid=0 send_seq=191167 receive_seq=191167 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001361 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31930 bytes_read=100287 bytes_retransmit=0 bytes_invalid=0 send_seq=5296 receive_seq=5296 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999342  heater_bed: target=60 temp=59.2 pwm=0.415 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.4 sysload=1.17 cputime=789.161 memavail=692916 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=208.5 pwm=1.000
Stats 5544.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9272005 bytes_read=2808674 bytes_retransmit=0 bytes_invalid=0 send_seq=191176 receive_seq=191176 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001355 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31936 bytes_read=100303 bytes_retransmit=0 bytes_invalid=0 send_seq=5297 receive_seq=5297 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999674 adj=49999381  heater_bed: target=60 temp=59.1 pwm=0.415 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=28.3 sysload=1.17 cputime=789.265 memavail=692916 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=206.5 pwm=1.000
Stats 5545.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9272239 bytes_read=2809114 bytes_retransmit=0 bytes_invalid=0 send_seq=191185 receive_seq=191185 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001351 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31942 bytes_read=100319 bytes_retransmit=0 bytes_invalid=0 send_seq=5298 receive_seq=5298 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999677 adj=49999380  heater_bed: target=60 temp=59.0 pwm=0.415 raspberry_pi: temp=41.9 mcu_temp: temp=38.4 chamber: temp=28.3 sysload=1.17 cputime=789.355 memavail=692916 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=204.9 pwm=1.000
Stats 5546.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9272446 bytes_read=2809556 bytes_retransmit=0 bytes_invalid=0 send_seq=191194 receive_seq=191194 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001350 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31948 bytes_read=100335 bytes_retransmit=0 bytes_invalid=0 send_seq=5299 receive_seq=5299 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999679 adj=49999423  heater_bed: target=60 temp=58.8 pwm=0.489 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=28.2 sysload=1.17 cputime=789.448 memavail=692812 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=203.5 pwm=1.000
Stats 5547.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9272696 bytes_read=2810022 bytes_retransmit=0 bytes_invalid=0 send_seq=191204 receive_seq=191204 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=31954 bytes_read=100351 bytes_retransmit=0 bytes_invalid=0 send_seq=5300 receive_seq=5300 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999426  heater_bed: target=60 temp=58.7 pwm=0.542 raspberry_pi: temp=41.9 mcu_temp: temp=38.5 chamber: temp=28.1 sysload=1.24 cputime=789.537 memavail=692932 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=201.6 pwm=1.000
Stats 5548.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9272928 bytes_read=2810462 bytes_retransmit=0 bytes_invalid=0 send_seq=191213 receive_seq=191213 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001347 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31960 bytes_read=100379 bytes_retransmit=0 bytes_invalid=0 send_seq=5301 receive_seq=5301 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999469  heater_bed: target=60 temp=58.6 pwm=0.542 raspberry_pi: temp=41.9 mcu_temp: temp=38.2 chamber: temp=28.0 sysload=1.24 cputime=789.634 memavail=693164 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=200.4 pwm=1.000
Stats 5549.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9273108 bytes_read=2810895 bytes_retransmit=0 bytes_invalid=0 send_seq=191220 receive_seq=191220 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001343 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31966 bytes_read=100394 bytes_retransmit=0 bytes_invalid=0 send_seq=5302 receive_seq=5302 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999549  heater_bed: target=60 temp=58.4 pwm=0.542 raspberry_pi: temp=42.4 mcu_temp: temp=38.4 chamber: temp=27.9 sysload=1.24 cputime=789.716 memavail=692580 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=199.1 pwm=1.000
Stats 5550.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9273461 bytes_read=2811480 bytes_retransmit=0 bytes_invalid=0 send_seq=191230 receive_seq=191230 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001341 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31972 bytes_read=100409 bytes_retransmit=0 bytes_invalid=0 send_seq=5303 receive_seq=5303 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999509  heater_bed: target=60 temp=58.3 pwm=0.613 raspberry_pi: temp=42.4 mcu_temp: temp=38.3 chamber: temp=27.8 sysload=1.24 cputime=789.815 memavail=692684 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=197.5 pwm=1.000
Stats 5551.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9273641 bytes_read=2811854 bytes_retransmit=0 bytes_invalid=0 send_seq=191237 receive_seq=191237 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001340 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31978 bytes_read=100424 bytes_retransmit=0 bytes_invalid=0 send_seq=5304 receive_seq=5304 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999485  heater_bed: target=60 temp=58.2 pwm=0.613 raspberry_pi: temp=41.9 mcu_temp: temp=38.5 chamber: temp=27.8 sysload=1.24 cputime=789.900 memavail=692684 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=196.4 pwm=1.000
Stats 5552.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9273837 bytes_read=2812284 bytes_retransmit=0 bytes_invalid=0 send_seq=191245 receive_seq=191245 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001339 rpi: mcu_awake=0.001 mcu_task_avg=0.000011 mcu_task_stddev=0.000016 bytes_write=31984 bytes_read=100439 bytes_retransmit=0 bytes_invalid=0 send_seq=5305 receive_seq=5305 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999705 adj=49999525  heater_bed: target=60 temp=58.0 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=27.6 sysload=1.46 cputime=789.992 memavail=692580 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=195.3 pwm=1.000
Stats 5553.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9274137 bytes_read=2812799 bytes_retransmit=0 bytes_invalid=0 send_seq=191255 receive_seq=191255 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001334 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=31990 bytes_read=100467 bytes_retransmit=0 bytes_invalid=0 send_seq=5306 receive_seq=5306 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999702 adj=49999619  heater_bed: target=60 temp=57.8 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.5 chamber: temp=27.6 sysload=1.46 cputime=790.085 memavail=692696 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=193.9 pwm=1.000
Stats 5554.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9274322 bytes_read=2813193 bytes_retransmit=0 bytes_invalid=0 send_seq=191263 receive_seq=191263 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001330 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=31996 bytes_read=100483 bytes_retransmit=0 bytes_invalid=0 send_seq=5307 receive_seq=5307 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999699 adj=49999525  heater_bed: target=60 temp=57.7 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.3 chamber: temp=27.6 sysload=1.46 cputime=790.170 memavail=692696 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=192.8 pwm=1.000
Stats 5555.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9274572 bytes_read=2813689 bytes_retransmit=0 bytes_invalid=0 send_seq=191273 receive_seq=191273 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001326 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=32002 bytes_read=100499 bytes_retransmit=0 bytes_invalid=0 send_seq=5308 receive_seq=5308 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999698 adj=49999445  heater_bed: target=60 temp=57.5 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.5 chamber: temp=27.4 sysload=1.46 cputime=790.238 memavail=692704 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=191.8 pwm=1.000
Stats 5556.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9274820 bytes_read=2814155 bytes_retransmit=0 bytes_invalid=0 send_seq=191283 receive_seq=191283 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001323 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=32008 bytes_read=100515 bytes_retransmit=0 bytes_invalid=0 send_seq=5309 receive_seq=5309 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999696 adj=49999418  heater_bed: target=60 temp=57.4 pwm=0.680 raspberry_pi: temp=42.9 mcu_temp: temp=38.5 chamber: temp=27.4 sysload=1.46 cputime=790.342 memavail=692708 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=190.4 pwm=1.000
Stats 5557.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9275054 bytes_read=2814595 bytes_retransmit=0 bytes_invalid=0 send_seq=191292 receive_seq=191292 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001318 rpi: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000019 bytes_write=32014 bytes_read=100531 bytes_retransmit=0 bytes_invalid=0 send_seq=5310 receive_seq=5310 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999694 adj=49999385  heater_bed: target=60 temp=57.3 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=27.4 sysload=1.58 cputime=790.433 memavail=692708 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=189.5 pwm=1.000
Stats 5558.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9275291 bytes_read=2815086 bytes_retransmit=0 bytes_invalid=0 send_seq=191301 receive_seq=191301 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001313 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=32020 bytes_read=100560 bytes_retransmit=0 bytes_invalid=0 send_seq=5311 receive_seq=5311 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999693 adj=49999364  heater_bed: target=60 temp=57.1 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=27.3 sysload=1.58 cputime=790.533 memavail=692468 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=188.2 pwm=1.000
Stats 5559.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9275481 bytes_read=2815474 bytes_retransmit=0 bytes_invalid=0 send_seq=191309 receive_seq=191309 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001308 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=32026 bytes_read=100576 bytes_retransmit=0 bytes_invalid=0 send_seq=5312 receive_seq=5312 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999692 adj=49999356  heater_bed: target=60 temp=57.0 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=27.2 sysload=1.58 cputime=790.624 memavail=692468 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=187.2 pwm=1.000
Stats 5560.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9275661 bytes_read=2815863 bytes_retransmit=0 bytes_invalid=0 send_seq=191316 receive_seq=191316 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=11 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=32032 bytes_read=100592 bytes_retransmit=0 bytes_invalid=0 send_seq=5313 receive_seq=5313 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999691 adj=49999352  heater_bed: target=60 temp=56.9 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.5 chamber: temp=27.2 sysload=1.58 cputime=790.713 memavail=692468 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=186.2 pwm=1.000
Stats 5561.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9275857 bytes_read=2816292 bytes_retransmit=0 bytes_invalid=0 send_seq=191324 receive_seq=191324 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001305 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=32038 bytes_read=100608 bytes_retransmit=0 bytes_invalid=0 send_seq=5314 receive_seq=5314 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999339  heater_bed: target=60 temp=56.8 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.7 chamber: temp=27.1 sysload=1.58 cputime=790.794 memavail=692204 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=185.0 pwm=1.000
Stats 5562.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9276037 bytes_read=2816671 bytes_retransmit=0 bytes_invalid=0 send_seq=191332 receive_seq=191332 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001306 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000016 bytes_write=32044 bytes_read=100624 bytes_retransmit=0 bytes_invalid=0 send_seq=5315 receive_seq=5315 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999307  heater_bed: target=60 temp=56.7 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.6 chamber: temp=27.1 sysload=1.62 cputime=790.881 memavail=692220 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=184.1 pwm=1.000
Stats 5563.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000007 bytes_write=9276228 bytes_read=2817067 bytes_retransmit=0 bytes_invalid=0 send_seq=191339 receive_seq=191339 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001307 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32050 bytes_read=100653 bytes_retransmit=0 bytes_invalid=0 send_seq=5316 receive_seq=5316 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999328  heater_bed: target=60 temp=56.5 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.6 chamber: temp=27.1 sysload=1.62 cputime=790.963 memavail=692220 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=183.2 pwm=1.000
Stats 5564.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9276462 bytes_read=2817565 bytes_retransmit=0 bytes_invalid=0 send_seq=191348 receive_seq=191348 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001300 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32056 bytes_read=100669 bytes_retransmit=0 bytes_invalid=0 send_seq=5317 receive_seq=5317 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999690 adj=49999322  heater_bed: target=60 temp=56.4 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.7 chamber: temp=27.1 sysload=1.62 cputime=791.066 memavail=692132 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=182.0 pwm=1.000
Stats 5565.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9276656 bytes_read=2817951 bytes_retransmit=0 bytes_invalid=0 send_seq=191356 receive_seq=191356 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001297 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32062 bytes_read=100685 bytes_retransmit=0 bytes_invalid=0 send_seq=5318 receive_seq=5318 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999352  heater_bed: target=60 temp=56.3 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.8 chamber: temp=26.9 sysload=1.62 cputime=791.136 memavail=692228 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=181.1 pwm=1.000
Stats 5566.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9276813 bytes_read=2818321 bytes_retransmit=0 bytes_invalid=0 send_seq=191362 receive_seq=191362 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32068 bytes_read=100701 bytes_retransmit=0 bytes_invalid=0 send_seq=5319 receive_seq=5319 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999689 adj=49999305  heater_bed: target=60 temp=56.2 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=27.0 sysload=1.62 cputime=791.222 memavail=692228 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=180.2 pwm=1.000
Stats 5567.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9276986 bytes_read=2818731 bytes_retransmit=0 bytes_invalid=0 send_seq=191369 receive_seq=191369 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32074 bytes_read=100717 bytes_retransmit=0 bytes_invalid=0 send_seq=5320 receive_seq=5320 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999368  heater_bed: target=60 temp=56.1 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.7 chamber: temp=27.0 sysload=1.65 cputime=791.314 memavail=692472 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=179.0 pwm=1.000
Stats 5568.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9277157 bytes_read=2819086 bytes_retransmit=0 bytes_invalid=0 send_seq=191375 receive_seq=191375 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32080 bytes_read=100746 bytes_retransmit=0 bytes_invalid=0 send_seq=5321 receive_seq=5321 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999687 adj=49999350  heater_bed: target=60 temp=55.9 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.7 chamber: temp=26.9 sysload=1.65 cputime=791.403 memavail=692488 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=178.1 pwm=1.000
Stats 5569.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9277314 bytes_read=2819487 bytes_retransmit=0 bytes_invalid=0 send_seq=191380 receive_seq=191380 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001294 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32086 bytes_read=100762 bytes_retransmit=0 bytes_invalid=0 send_seq=5322 receive_seq=5322 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999688 adj=49999329  heater_bed: target=60 temp=55.8 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.7 chamber: temp=26.9 sysload=1.65 cputime=791.488 memavail=692488 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=177.3 pwm=1.000
Stats 5570.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9277471 bytes_read=2819871 bytes_retransmit=0 bytes_invalid=0 send_seq=191386 receive_seq=191386 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32092 bytes_read=100778 bytes_retransmit=0 bytes_invalid=0 send_seq=5323 receive_seq=5323 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999686 adj=49999335  heater_bed: target=60 temp=55.7 pwm=0.680 raspberry_pi: temp=42.4 mcu_temp: temp=38.6 chamber: temp=26.9 sysload=1.65 cputime=791.568 memavail=692236 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=176.2 pwm=1.000
Stats 5571.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9277639 bytes_read=2820233 bytes_retransmit=0 bytes_invalid=0 send_seq=191392 receive_seq=191392 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001293 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32098 bytes_read=100794 bytes_retransmit=0 bytes_invalid=0 send_seq=5324 receive_seq=5324 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999685 adj=49999319  heater_bed: target=60 temp=55.6 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.6 chamber: temp=26.8 sysload=1.65 cputime=791.654 memavail=692252 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=175.3 pwm=1.000
Stats 5572.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000006 mcu_task_stddev=0.000006 bytes_write=9277786 bytes_read=2820627 bytes_retransmit=0 bytes_invalid=0 send_seq=191397 receive_seq=191397 retransmit_seq=0 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=180001292 rpi: mcu_awake=0.001 mcu_task_avg=0.000010 mcu_task_stddev=0.000015 bytes_write=32104 bytes_read=100810 bytes_retransmit=0 bytes_invalid=0 send_seq=5325 receive_seq=5325 retransmit_seq=0 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=49999683 adj=49999287  heater_bed: target=60 temp=55.5 pwm=0.680 raspberry_pi: temp=41.9 mcu_temp: temp=38.6 chamber: temp=26.8 sysload=1.52 cputime=791.739 memavail=692252 print_time=5538.711 buffer_time=0.000 print_stall=0 extruder: target=220 temp=174.5 pwm=1.000