Starting Klippy...
Args: ['/home/my/klipper/klippy/klippy.py', '/home/my/klipper_config_myano/printer.cfg', '-I', '/tmp/printer', '-l', '/home/my/klipper_logs/klippy.log', '-a', '/tmp/klippy_uds']
Git version: 'v0.10.0-419-g4490a584'
CPU: 4 core ?
Python: '2.7.18 (default, Jul 14 2021, 08:11:37) \n[GCC 10.2.1 20210110]'
Start printer at Thu Nov 24 16:03:53 2022 (1669277033.4 17.0)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473724133856: New connection
webhooks client 281473724133856: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 281473724133856: Disconnected
Restarting printer
Start printer at Thu Nov 24 16:04:29 2022 (1669277069.6 30.4)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473724281952: New connection
webhooks client 281473724281952: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
webhooks client 281473724281952: Disconnected
Restarting printer
Start printer at Thu Nov 24 16:04:32 2022 (1669277072.2 32.9)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473724306528: New connection
webhooks client 281473724306528: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 281473724306528: Disconnected
Restarting printer
Start printer at Thu Nov 24 16:05:05 2022 (1669277105.2 66.0)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473707139632: New connection
webhooks client 281473707139632: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
Attempting MCU 'mcu' reset
webhooks client 281473707139632: Disconnected
Restarting printer
Start printer at Thu Nov 24 16:05:13 2022 (1669277113.7 74.4)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473724091280: New connection
webhooks client 281473724091280: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
webhooks client 281473724091280: Disconnected
Restarting printer
Start printer at Thu Nov 24 16:05:16 2022 (1669277116.0 76.8)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473724776192: New connection
webhooks client 281473724776192: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
Attempting MCU 'mcu' reset
webhooks client 281473724776192: Disconnected
Restarting printer
Start printer at Thu Nov 24 16:05:19 2022 (1669277119.3 80.1)
===== Config file =====
[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	TURN_OFF_HEATERS
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	BASE_CANCEL_PRINT

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	{% set x = params.X|default(230) %}
	{% set y = params.Y|default(230) %}
	{% set z = params.Z|default(10)|float %}
	{% set e = params.E|default(1) %}
	{% set max_z = printer.toolhead.axis_maximum.z|float %}
	{% set act_z = printer.toolhead.position.z|float %}
	{% set lift_z = z|abs %}
	{% if act_z < (max_z - lift_z) %}
	{% set z_safe = lift_z %}
	{% else %}
	{% set z_safe = max_z - act_z %}
	{% endif %}
	SAVE_GCODE_STATE NAME=PAUSE_state
	BASE_PAUSE
	G91
	G1 E-{e} F2100
	G1 Z{z_safe}
	G90
	G1 X{x} Y{y} F6000

[gcode_macro RESUME]
rename_existing = BASE_RESUME
gcode = 
	{% set e = params.E|default(1) %}
	G91
	G1 E{e} F2100
	G90
	RESTORE_GCODE_STATE NAME=PAUSE_state MOVE=1
	BASE_RESUME

[mcu]
serial = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3500
max_z_velocity = 100
max_z_accel = 500

[stepper_x]
step_pin = PC2
dir_pin = PB9
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA5
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PB6
dir_pin = !PB5
enable_pin = !PC3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PA7
position_endstop = 0.0
position_max = 250

[extruder]
max_extrude_only_distance = 100.0
step_pin = PB4
dir_pin = PB3
enable_pin = !PC3
microsteps = 16
rotation_distance = 34.406
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PA1
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC5
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PA2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
control = pid
pid_kp = 54.027
pid_ki = 0.770
pid_kd = 948.182
min_temp = 0
max_temp = 130

[fan]
pin = PA0

[virtual_sdcard]
path = ~/gcode_files
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281473728267200: New connection
webhooks client 281473728267200: Client info {'program': 'Moonraker', 'version': 'v0.7.1-56-g2447cca'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/my/klipper/klippy/serialhdl.py", line 69, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/my/klipper/klippy/serialhdl.py", line 258, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 316, in get_response
    cmd_queue)
  File "/home/my/klipper/klippy/serialhdl.py", line 250, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/my/klipper/klippy/serialhdl.py", line 62, in _error
    raise error(self.warn_prefix + (msg % params))
error: mcu 'mcu': Serial connection closed