===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
=============== Log rollover at Mon Jan 30 18:14:11 2023 ===============
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
webhooks client 1967044064: New connection
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
webhooks client 1967044064: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Fri Jan 27 22:44:47 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
CONFIG_MACH_atmega2560=y
# CONFIG_MACH_atmega1280 is not set
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega2560"
CONFIG_AVRDUDE_PROTOCOL="wiring"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=250000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Fri Jan 27 22:45:21 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega2560 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(294276): Fri Jan 27 22:45:40 2023
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 18:20:16 2023 (1675120816.8 422.4)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
webhooks client 1966947776: New connection
webhooks client 1966947776: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Mon Jan 30 18:21:09 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
CONFIG_MACH_atmega2560=y
# CONFIG_MACH_atmega1280 is not set
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega2560"
CONFIG_AVRDUDE_PROTOCOL="wiring"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=115000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 18:21:32 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega2560 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=115000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(294276): Mon Jan 30 18:21:46 2023
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 18:26:37 2023 (1675121197.2 802.8)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
webhooks client 1966520664: New connection
webhooks client 1966520664: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 18:28:35 2023 (1675121315.7 921.3)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
webhooks client 1966983512: New connection
webhooks client 1966983512: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1480): Mon Jan 30 18:23:10 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=115000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 18:25:15 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=115000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293864): Mon Jan 30 18:25:29 2023
Unable to issue reset command on MCU 'mcu'
webhooks client 1966983512: Disconnected
Restarting printer
Start printer at Mon Jan 30 18:34:49 2023 (1675121689.3 1294.9)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
webhooks client 1966667256: New connection
webhooks client 1966667256: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 18:36:20 2023 (1675121781.0 1386.5)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966667352: New connection
webhooks client 1966667352: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 1966667352: Disconnected
Restarting printer
Start printer at Mon Jan 30 18:36:38 2023 (1675121798.8 1404.4)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966295024: New connection
webhooks client 1966295024: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
b'Got EOF when reading from device'
mcu 'mcu': Timeout on connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1480): Mon Jan 30 18:23:10 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=115000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 18:25:15 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=115000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293864): Mon Jan 30 18:25:29 2023
Unable to issue reset command on MCU 'mcu'
webhooks client 1966295024: Disconnected
Restarting printer
Start printer at Mon Jan 30 18:38:24 2023 (1675121904.5 1510.1)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966254376: New connection
webhooks client 1966254376: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 18:39:33 2023 (1675121973.6 1579.2)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966720600: New connection
webhooks client 1966720600: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 18:40:03 2023 (1675122003.3 1608.8)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966258520: New connection
webhooks client 1966258520: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
b'Got EOF when reading from device'
mcu 'mcu': Timeout on connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1480): Mon Jan 30 18:23:10 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=115000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 18:25:15 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=115000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293864): Mon Jan 30 18:25:29 2023
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:23:44 2023 (1675135424.8 15030.3)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966667328: New connection
webhooks client 1966667328: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:24:08 2023 (1675135448.8 15054.4)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1967208000: New connection
webhooks client 1967208000: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:24:22 2023 (1675135462.8 15068.3)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966364200: New connection
webhooks client 1966364200: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:24:45 2023 (1675135485.1 15090.6)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1967154752: New connection
webhooks client 1967154752: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1480): Mon Jan 30 18:23:10 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=115000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 18:25:15 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=115000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293864): Mon Jan 30 18:25:29 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:28:09 2023 (1675135689.3 15294.8)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966892608: New connection
webhooks client 1966892608: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:28:38 2023 (1675135718.7 15324.3)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966364224: New connection
webhooks client 1966364224: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:29:08 2023 (1675135748.4 15354.0)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1967208000: New connection
webhooks client 1967208000: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:29:52 2023 (1675135792.0 15397.6)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966364224: New connection
webhooks client 1966364224: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1480): Mon Jan 30 18:23:10 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=115000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 18:25:15 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=115000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293864): Mon Jan 30 18:25:29 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:39:25 2023 (1675136365.3 15970.8)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966364992: New connection
webhooks client 1966364992: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
b'Got EOF when reading from device'
mcu 'mcu': Timeout on connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00: [Errno 2] No such file or directory: '/dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00'
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 1966364992: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:40:38 2023 (1675136438.4 16043.9)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966008328: New connection
webhooks client 1966008328: Client info {'program': 'Moonraker', 'version': 'v0.7.1-821-g12b1bef'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 1966008328: Disconnected
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Mon Jan 30 22:38:13 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=57600
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7648): Mon Jan 30 22:38:36 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=57600 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293860): Mon Jan 30 22:38:51 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 1971551704: New connection
webhooks client 1971551704: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
Unable to issue reset command on MCU 'mcu'
webhooks client 1971551704: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:45:49 2023 (1675136749.5 16355.0)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966106632: New connection
webhooks client 1966106632: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Unable to issue reset command on MCU 'mcu'
webhooks client 1966106632: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:46:53 2023 (1675136813.4 16419.0)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966029120: New connection
webhooks client 1966029120: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Mon Jan 30 22:38:13 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=57600
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7648): Mon Jan 30 22:38:36 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=57600 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293860): Mon Jan 30 22:38:51 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Unable to issue reset command on MCU 'mcu'
webhooks client 1966029120: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:48:38 2023 (1675136919.0 16524.5)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966800320: New connection
webhooks client 1966800320: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Mon Jan 30 22:38:13 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=57600
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7648): Mon Jan 30 22:38:36 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=57600 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293860): Mon Jan 30 22:38:51 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Unable to issue reset command on MCU 'mcu'
webhooks client 1966800320: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:52:48 2023 (1675137168.9 16774.5)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = serial: /dev/ttyACM0
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
webhooks client 1967011656: New connection
webhooks client 1967011656: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port serial: /dev/ttyACM0: [Errno 2] No such file or directory: 'serial: /dev/ttyACM0'
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Mon Jan 30 22:38:13 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=57600
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7648): Mon Jan 30 22:38:36 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=57600 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293860): Mon Jan 30 22:38:51 2023
Unable to issue reset command on MCU 'mcu'
webhooks client 1967011656: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:55:14 2023 (1675137314.5 16920.0)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/ttyACM0
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1967012496: New connection
webhooks client 1967012496: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Unable to issue reset command on MCU 'mcu'
webhooks client 1967012496: Disconnected
Restarting printer
Start printer at Mon Jan 30 22:55:43 2023 (1675137344.0 16949.5)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1971849632: New connection
webhooks client 1971849632: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 22:56:01 2023 (1675137361.1 16966.6)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966720552: New connection
webhooks client 1966720552: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1479): Mon Jan 30 22:38:13 2023
========= Last MCU build config =========
CONFIG_LOW_LEVEL_OPTIONS=y
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_AVR_FREQ_16000000=y
# CONFIG_AVR_FREQ_8000000 is not set
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_AVR_SERIAL_UART0=y
# CONFIG_AVR_SERIAL_UART1 is not set
# CONFIG_AVR_SERIAL_UART2 is not set
# CONFIG_AVR_SERIAL_UART3 is not set
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=57600
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_INITIAL_PINS=""
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7648): Mon Jan 30 22:38:36 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=57600 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293860): Mon Jan 30 22:38:51 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 23:04:22 2023 (1675137862.0 17467.6)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966818856: New connection
webhooks client 1966818856: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
Loaded MCU 'mcu' 108 commands (v0.11.0-56-gf9daf12e / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125)
MCU 'mcu' config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (584 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 17471.9: gcodein=0  mcu: mcu_awake=0.032 mcu_task_avg=0.000180 mcu_task_stddev=0.000442 bytes_write=2066 bytes_read=4223 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=6144 freq=15998965 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.39 cputime=4.832 memavail=571644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1966818856
webhooks: registering remote method 'reboot_machine' for connection id: 1966818856
webhooks: registering remote method 'pause_job_queue' for connection id: 1966818856
webhooks: registering remote method 'start_job_queue' for connection id: 1966818856
Stats 17472.9: gcodein=0  mcu: mcu_awake=0.032 mcu_task_avg=0.000180 mcu_task_stddev=0.000442 bytes_write=8771 bytes_read=4793 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.007 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15998942 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.39 cputime=4.928 memavail=571648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17473.9: gcodein=0  mcu: mcu_awake=0.032 mcu_task_avg=0.000180 mcu_task_stddev=0.000442 bytes_write=10039 bytes_read=5109 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=298 retransmit_seq=2 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=708 stalled_bytes=0 freq=15999118 heater_bed: target=0 temp=138.5 pwm=0.000 sysload=1.39 cputime=5.019 memavail=572220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
MCU 'mcu' shutdown: ADC out of range
clocksync state: mcu_freq=16000000 last_clock=109849093 clock_est=(17471.404 74152811 15999118.437) min_half_rtt=0.000846 min_rtt_time=17473.634 time_avg=17471.403(0.250) clock_avg=74152811.823(3996792.083) pred_variance=176358884.490
Dumping serial stats: bytes_write=10283 bytes_read=5140 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=302 retransmit_seq=2 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=484 stalled_bytes=0
Dumping send queue 100 messages
Sent 0 17472.405469 17472.403029 61: seq: 1b, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 1 17472.407909 17472.403029 61: seq: 1c, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 2 17472.410722 17472.408282 61: seq: 1d, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 3 17472.414718 17472.412278 61: seq: 1e, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 4 17472.418723 17472.416283 61: seq: 1f, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'p', spi_send oid=6 data=b'x', spi_send oid=6 data=b'p', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00'
Sent 5 17472.422718 17472.420278 61: seq: 10, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 6 17472.426720 17472.424280 61: seq: 11, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 7 17472.430721 17472.428281 61: seq: 12, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 8 17472.434725 17472.432285 61: seq: 13, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 9 17472.437165 17472.432285 61: seq: 14, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 10 17472.439605 17472.436289 61: seq: 15, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 11 17472.442714 17472.440274 61: seq: 16, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 12 17472.446721 17472.444281 61: seq: 17, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 13 17472.450717 17472.448277 61: seq: 18, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 14 17472.454725 17472.452285 61: seq: 19, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\xa8', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 15 17472.458798 17472.456358 61: seq: 1a, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 16 17472.461238 17472.456358 61: seq: 1b, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 17 17472.464256 17472.461816 61: seq: 1c, spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'@', spi_send oid=6 data=b'H', spi_send oid=6 data=b'@', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':'
Sent 18 17472.468071 17472.465631 61: seq: 1d, spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02'
Sent 19 17472.472113 17472.469673 61: seq: 1e, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 20 17472.476170 17472.473730 61: seq: 1f, spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*'
Sent 21 17472.480159 17472.477719 61: seq: 10, spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 22 17472.484113 17472.481673 61: seq: 11, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 23 17472.488108 17472.485668 61: seq: 12, spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 24 17472.492090 17472.489650 61: seq: 13, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02'
Sent 25 17472.494530 17472.489650 61: seq: 14, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 26 17472.496970 17472.494200 61: seq: 15, spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xc8', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\xa8', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J'
Sent 27 17472.500117 17472.497677 61: seq: 16, spi_send oid=6 data=b'B', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xe2'
Sent 28 17472.504203 17472.501763 61: seq: 17, spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 29 17472.508118 17472.505678 61: seq: 18, spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*'
Sent 30 17472.512109 17472.509669 61: seq: 19, spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 31 17472.514549 17472.509669 61: seq: 1a, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 32 17472.517478 17472.515038 61: seq: 1b, spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z'
Sent 33 17472.521402 17472.518962 61: seq: 1c, spi_send oid=6 data=b'r', spi_send oid=6 data=b'\x92', spi_send oid=6 data=b'\x9a', spi_send oid=6 data=b'\x92', spi_send oid=6 data=b'@', spi_send oid=6 data=b'H', spi_send oid=6 data=b'@', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B'
Sent 34 17472.523842 17472.518962 61: seq: 1d, spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2'
Sent 35 17472.526282 17472.522899 61: seq: 1e, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 36 17472.529321 17472.526881 61: seq: 1f, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2'
Sent 37 17472.533406 17472.530966 61: seq: 10, spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2'
Sent 38 17472.537310 17472.534870 61: seq: 11, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 39 17472.541263 17472.538823 61: seq: 12, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'P', spi_send oid=6 data=b'X', spi_send oid=6 data=b'P', spi_send oid=6 data=b'\x80'
Sent 40 17472.545326 17472.542886 61: seq: 13, spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 41 17472.549281 17472.546841 61: seq: 14, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x82', spi_send oid=6 data=b'\x8a', spi_send oid=6 data=b'\x82', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'P', spi_send oid=6 data=b'X'
Sent 42 17472.553248 17472.550808 61: seq: 15, spi_send oid=6 data=b'P', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xc8', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'b'
Sent 43 17472.557242 17472.554802 61: seq: 16, spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 44 17472.559682 17472.554802 61: seq: 17, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 45 17472.562122 17472.558803 61: seq: 18, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12'
Sent 46 17472.565241 17472.562801 61: seq: 19, spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 47 17472.567681 17472.562801 61: seq: 1a, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 48 17472.570490 17472.568050 61: seq: 1b, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xc2'
Sent 49 17472.574489 17472.572049 61: seq: 1c, spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'p', spi_send oid=6 data=b'x', spi_send oid=6 data=b'p', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2'
Sent 50 17472.576929 17472.572049 61: seq: 1d, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 51 17472.579369 17472.576046 61: seq: 1e, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2'
Sent 52 17472.582492 17472.580052 61: seq: 1f, spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B'
Sent 53 17472.650097 17472.649857 6: seq: 10, get_clock
Sent 54 17473.015270 17473.014950 8: seq: 11, buttons_ack oid=24 count=1
Sent 55 17473.024247 17473.023727 13: seq: 12, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 56 17473.024607 17473.023867 9: seq: 13, spi_send oid=6 data=b'\x80'
Sent 57 17473.024967 17473.024046 9: seq: 14, spi_send oid=6 data=b'\xb0'
Sent 58 17473.025327 17473.024213 9: seq: 15, spi_send oid=6 data=b'\xb8'
Sent 59 17473.025687 17473.024304 9: seq: 16, spi_send oid=6 data=b'\xb0'
Sent 60 17473.026047 17473.024480 9: seq: 17, spi_send oid=6 data=b'2'
Sent 61 17473.026407 17473.024598 9: seq: 18, spi_send oid=6 data=b':'
Sent 62 17473.026767 17473.024765 9: seq: 19, spi_send oid=6 data=b'2'
Sent 63 17473.027127 17473.024889 9: seq: 1a, spi_send oid=6 data=b'\x12'
Sent 64 17473.027487 17473.025027 9: seq: 1b, spi_send oid=6 data=b'\x1a'
Sent 65 17473.027847 17473.025087 9: seq: 1c, spi_send oid=6 data=b'\x12'
Sent 66 17473.028207 17473.025250 9: seq: 1d, spi_send oid=6 data=b'2'
Sent 67 17473.030007 17473.026086 45: seq: 1e, spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x82', spi_send oid=6 data=b'\x8a'
Sent 68 17473.030441 17473.030081 9: seq: 1f, spi_send oid=6 data=b'\x82'
Sent 69 17473.634411 17473.634171 6: seq: 10, get_clock
Sent 70 17473.823035 17473.822515 13: seq: 11, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 71 17473.823395 17473.822858 9: seq: 12, spi_send oid=6 data=b'\x80'
Sent 72 17473.823755 17473.822949 9: seq: 13, spi_send oid=6 data=b'\x00'
Sent 73 17473.824115 17473.823123 9: seq: 14, spi_send oid=6 data=b'\x08'
Sent 74 17473.824475 17473.823282 9: seq: 15, spi_send oid=6 data=b'\x00'
Sent 75 17473.824835 17473.823460 9: seq: 16, spi_send oid=6 data=b'2'
Sent 76 17473.825195 17473.823608 9: seq: 17, spi_send oid=6 data=b':'
Sent 77 17473.825555 17473.823693 9: seq: 18, spi_send oid=6 data=b'2'
Sent 78 17473.825915 17473.823851 9: seq: 19, spi_send oid=6 data=b'\xe2'
Sent 79 17473.826275 17473.823948 9: seq: 1a, spi_send oid=6 data=b'\xea'
Sent 80 17473.826635 17473.824111 9: seq: 1b, spi_send oid=6 data=b'\xe2'
Sent 81 17473.826995 17473.824210 9: seq: 1c, spi_send oid=6 data=b'"'
Sent 82 17473.829435 17473.825464 61: seq: 1d, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 83 17473.835892 17473.833452 61: seq: 1e, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\xa8'
Sent 84 17473.843879 17473.841439 61: seq: 1f, spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"'
Sent 85 17473.847874 17473.845434 61: seq: 10, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 86 17473.851875 17473.849435 61: seq: 11, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'@', spi_send oid=6 data=b'H', spi_send oid=6 data=b'@', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 87 17473.855870 17473.853430 61: seq: 12, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'b'
Sent 88 17473.859897 17473.857457 61: seq: 13, spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r'
Sent 89 17473.863874 17473.861434 61: seq: 14, spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa'
Sent 90 17473.867878 17473.865438 61: seq: 15, spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"'
Sent 91 17473.870318 17473.865438 61: seq: 16, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 92 17473.872758 17473.869428 61: seq: 17, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 93 17473.876990 17473.874550 61: seq: 18, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"'
Sent 94 17473.879430 17473.874550 61: seq: 19, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 95 17473.881870 17473.878551 61: seq: 1a, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xc8', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\x10', spi_send oid=6 data=b'\x18'
Sent 96 17473.884989 17473.882549 61: seq: 1b, spi_send oid=6 data=b'\x10', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'r'
Sent 97 17473.888990 17473.886550 61: seq: 1c, spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 98 17473.893081 17473.890641 61: seq: 1d, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x92', spi_send oid=6 data=b'\x9a'
Sent 99 17473.897023 17473.894583 61: seq: 1e, spi_send oid=6 data=b'\x92', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'"'
Dumping receive queue 99 messages
Receive: 0 17470.642192 17470.636865 48: seq: 11, identify_response offset=0 data=b'x\xda\xa5Y\xe9n\x1c\xb9\x11~\x15\xee\x00F\xb2\x81$\xcc\xd5s(\xf0\x0f]\xdeu\xd6\xb2\xb5\x1e+\x0e\x10\x04\x8dV7g\x86Q'
Receive: 1 17470.650179 17470.643288 48: seq: 12, identify_response offset=40 data=b'_\xdb\xec\xd6\xb1\x0b\xbd\xfb\xd6\xc1\xabgF\xdeEb\xc0P\x93\xac"\x8b\xc5\xaa\xaf\x8e\xf9mp\xd7\xa9<\x8b\x1fd\xa3UU\xea\xc1'
Receive: 2 17470.658177 17470.651179 48: seq: 13, identify_response offset=80 data=b'\xe9`\x93\xa6\xa7\xe2\xaf?\\\\|/\xa2\x93\xe9\xc9P\xdc\xa9\xb2kU\xaeq\xf6\xe3\xad87\xc3\xef\xc5\xf8d<;\x19\x0fG\xb3'
Receive: 3 17470.663438 17470.659158 49: seq: 14, identify_response offset=120 data=b'\xe1h\x1c\r\x8e\x06iU\x14I\x99\xc1&\xbf\r\x92<\xaf\xd2\xa4\x95q\xa52-\xd2\xaa+\xdb\xb7o\xd2\xc1\xe9\xe2\x08Nl[8'
Receive: 4 17470.675421 17470.668233 49: seq: 15, identify_response offset=160 data=b'*N\xd2{\x01\xab0\x1d\xac\xcff\x01A\x96Y\x82\xba\xd2\xf4G\x95o\xdft\xa2\xee\xf2<\xeejf\x08v\xfc\xa5\x93\xcd\xb3\xdb\x13'
Receive: 5 17470.683430 17470.676419 49: seq: 16, identify_response offset=200 data=b'\x04\xb8G\xeaF\xea6nUz\xafy\xd46I\xa9\x0b\xd5\xc6\xf6T\xa1J\xb8\xbf9\x7f\x0e\xf7\xc8e\xd2\xc4z\xdb\xb5Y\xf5X\x0e'
Receive: 6 17470.691433 17470.684381 49: seq: 17, identify_response offset=240 data=b'N\xc7x\xb5r\xad6 \x91\x1e\x8dF\x0b{\x84\xaeU\xfc\xed\xd3\x8a\xe4)\x86\xdd\x93\\e\xb1\xbf\xe4to\xc78\xdd&e)s'
Receive: 7 17470.699424 17470.692436 49: seq: 18, identify_response offset=280 data=b"w_U\xc6eW\xdc\xc9\x06G\x05\x8ctR\xd4\xb9\x8ca\xabN\xbe}\xb3U\x82\xf6\xde\x9b\xad\x93F\x96\xad\x91\nN\x1a\x05'="
Receive: 8 17470.707422 17470.700381 49: seq: 19, identify_response offset=320 data=b'\xe5\x93i\xb4/\xfb\xe04\x9ax\xaa2\xc9\xab\r\xc8\x1cH\x02\x17\x19\x9cN\xbc\xccF\xdd\x96\x82\x87\xc1\xf5fKGJ\x93\xb2\xe9o'
Receive: 9 17470.712679 17470.708359 49: seq: 1a, identify_response offset=360 data=b'\xd6{\xbf\xf9\xcc\x11gj\xa3\xda$\x8f\xab\xae\xdda0\xf7KE&\xd7I\x97\xb7\xb1\x9b@%d]\x93\xb4`\xbd$\xe7h\xee\xf6'
Receive: 10 17470.720690 17470.716263 49: seq: 1b, identify_response offset=400 data=b'\x93`\x8bmU\xf7\xf6J{\x87\x8f\xfd\xe1\xdbl:\x9d/\x86\x96\xb8\xd1\xb19[\xda\x8fl\xea\xbe"\xf75s_s\xf7%\xf3\xe4'
Receive: 11 17470.728672 17470.721628 49: seq: 1c, identify_response offset=440 data=b'\xd9\x99\x00\xa8#r\x87\xa8qj\x0f\x80OP$\x9b$\xf8\t\xfe\x05{\x07\xeba\xa6\xa9\x97\xac\xa8\xbb\xe58\x1a\x86\x8c\xee\xe1\xbc\xa6'
Receive: 12 17470.736671 17470.729629 49: seq: 1d, identify_response offset=480 data=b'KY\xd5\xea\xa9gA$L\xd2&\xb1V\xbf\xa2ut\xe0\xcam\x8c\x1a\x0b\xbcAK\x98\x02\xfb\xf2\xf2\xce\xa7n\xd3\xfa\xb18\xf0\x1a'
Receive: 13 17470.744761 17470.737654 49: seq: 1e, identify_response offset=520 data=b'\xe93x\x88\xdf\xc3\x1a_\xb7\xfb:\xdbn\xffy\xa6^b\xb0\xc0\xdd\x8d\x11\x14Z\xf5 \xe3\xad\xdal\xe9\x86\x93EH\x0f\xe6\xb9\xc9'
Receive: 14 17470.752674 17470.746017 49: seq: 1f, identify_response offset=560 data=b'\xe5\x01\xf7skq\xfb\\K\xd6\xcd\xac\xc7i\xdd\xf9\x10\xb3Y\x8a\x0b\xbdy\xfb\xe6o\x80_\x93I\x8f\xf7Q\xb5[PC\x9cZ\x9b'
Receive: 15 17470.760673 17470.753726 49: seq: 10, identify_response offset=600 data=b'\x07\nof\xba\x9d/\xc7\xeeyRg8:\xcd\xef\xdd7\xf8\xbf\xfd|.\xd3\xb8o#"-\xb2x\xcfl\xc6\xc1\t\xb2\xae\xbd\x17'
Receive: 16 17470.768670 17470.761655 49: seq: 11, identify_response offset=640 data=b'\xe106\xd6\x9c\xa9\xc6~2\x8a\x11\xb1\xa7\xear-\x83M\xc7\xfeb\xedV6E\x05\x0eZ\x1f\xd4h\xb8\xec\x95:\x1dz\xfe"\xed'
Receive: 17 17470.773937 17470.769637 49: seq: 12, identify_response offset=680 data=b'\x92\xc6\xd9F\xf3\x14\xefy\xb7h\xdd$Z^\xab\n\xc9\x16\xe6Q\xa9mP\x1f^\xad\xb0\x7f&\xef:\xb0\xe7\xaa\x1e\x9c.\xed\x08v'
Receive: 18 17470.781925 17470.774852 49: seq: 13, identify_response offset=720 data=b'\xd9\x90-\xf3\xfb\x8c\x1cY#\x13\x08\x12M\xc6@\x89\x1e\xc4(0\xb6\x04\x8f\x8dj\xe5\x1e\x05\x1a-\x13\x82(\xb2\x90\xcdF\x96\xe9s'
Receive: 19 17470.789922 17470.782874 49: seq: 14, identify_response offset=760 data=b'\x8cp\x01B\xc0\x14CG\xbc\xad\n\xb9\x17P\x0c\xe8\xba\xd73c\x17N\xfa!\x00\xa1\xdc\xc1\x15_\xd7\xe9\xb8Q\x9b\x8dl\xf0\x12\x1a'
Receive: 20 17470.797922 17470.790860 49: seq: 15, identify_response offset=800 data=b'\xfd\x03\x11)\xf2\x87S8\x03\x99\x92V:\x05\x8d\xc19\xd7\n@\x1a\\:f\x1d\x8a\xb4I\xd9b\x8e\x06\x1b\xf0f\x92\x13\xec\xdf\x8c'
Receive: 21 17470.805920 17470.798924 49: seq: 16, identify_response offset=840 data=b'\x88\x06t\xce\xc3\xae\xc6W\x80\x87<\x1a\x18\xc4\x8b5\x9c\x17\x83\x05:@\xc7o\xd6\xf3l\x97\x0c\x9f\xc0\x92\xf9\xe7\x98\x81\xc6\x10\x96\x8a'
Receive: 22 17470.813921 17470.806998 49: seq: 17, identify_response offset=880 data=b'*S\xeb\xe7\x18\xde\xda\xed\xd5Hr)ab*H\x80\xab\xcc65l\xfc\x86}z\x9c\x8bsi@c\xca\x84\xe6-w\x8f\x9f\xc2'
Receive: 23 17470.819186 17470.814890 49: seq: 18, identify_response offset=920 data=b'UU\x06a\x0f\x0e\x17\xd5z\r\xa7\x90S\xb9\x80\x04ol\xe1\x91\xae\xe1\xb49\x1f\x07+]\x9dyMs\xc6\xb1\xed\x82c\xe6 .'
Receive: 24 17470.827187 17470.822748 49: seq: 19, identify_response offset=960 data=b'?\xc9N(=\x1c\xfb\xe1\x05\xc6;\x0c\xf4\x96\x9d\x07\x91h\xe4\x08v\xc3\xee\xffhl\x8576\x83\xbe~\x04i\xcf\x06\x18\xb72\xbd'
Receive: 25 17470.835337 17470.828126 49: seq: 1a, identify_response offset=1000 data=b'\x0f\x82\xf5\xc4\xc9\xb0\x13\xab\x9d\x04u\x05\xfe\xbc{~\x10."\xbb\xc1N\xa0zU-\x8b\x1d\x86=\xb5\xcc-\xc1\x1e\xe4\xbf\x92f\xa1'
Receive: 26 17470.843003 17470.837799 49: seq: 1b, identify_response offset=1040 data=b'M\x03\xc2\xab5\xdf)r"\x1d\x02\xb9\xd7R5\xaf\xba\x9e\xe6^K\xe2&K:\xa4\x93\x87\xf2\x16wF\x15F\xd6QdYv\x02'
Receive: 27 17470.850925 17470.844249 49: seq: 1c, identify_response offset=1080 data=b'\xab#w\xaf\x05V\xbd\xb0\xc4\x88\xe4.\xfa\xe3\x131xY\x03\xdfR\xe6\x80\xd9\x1f\xc0\x03\x98\x1c\xc5tx\x97\xb9\xf9$~F\x85\xdd'
Receive: 28 17470.858926 17470.851994 49: seq: 1d, identify_response offset=1120 data=b'\xf3\x80\x01\x90\x14i\xc2;\xec$] \xf7d\x8f\x88n@\x89\x80\xdb\xb3\x97\x15\x00\xd3\x8c\x99J\xf9dD\x80X\xe5\x9cW5\x0cg'
Receive: 29 17470.864183 17470.859943 49: seq: 1e, identify_response offset=1160 data=b'#&\xb2\xfa\xf8\x83\x0c\x03\xb4\x02\xb7\n\x82=\xa6\xf2ko\xb3\xdeY\xa3)\xd3\x05\xee\x1e\xacN\xdcj\x8bIX\x18\xfeLN\x06P'
Receive: 30 17470.872189 17470.867774 49: seq: 1f, identify_response offset=1200 data=b'&\x83\xdc\x0cXf\x9eEW\xeb\xf6\x11\x12\xed\x90\xb7P\xba\xb2\xc1\xae\xa8\xb4:\x94\x05\xecm\x1a\ry\xd3\xd7\xef1\x01\x93\xe1\x04\xe3'
Receive: 31 17470.880177 17470.873123 49: seq: 10, identify_response offset=1240 data=b'\x9b8=\xeaS\xbd\x02\xd3x\x1a\xa7\x121\xc6\x02\x808\x85\x89\x99s\xbc\xd1\xd2\x13P\x04B\xeb\xe5\x18%\\\xc8\n\x02\x18p\x80\x91'
Receive: 32 17470.888175 17470.881157 49: seq: 11, identify_response offset=1280 data=b'\x9aD\xa0\xa7jBj\x07\xe4\x8c\xb5p\xba\xe1F\x1d\xa2\xcb\x1e\xf0\x000\x89\x85\xa7k\xc3\x04C\xd6Uc\xa2\x1b{/\x8d\x9d\x91\xc8'
Receive: 33 17470.896173 17470.889213 49: seq: 12, identify_response offset=1320 data=b'\xa7Z\xc1\x93\x84\xb1t\xe9v\xda\xb9EH\x04\x06\xc5\xc8\x7f\xc8\x8f\x03\x1f\x98\xbe\xd8\xa4\x05\xeb\xdb\xb3\xcb\x8b\xf8\xfa\xec_\x98\x8a`N'
Receive: 34 17470.904172 17470.897177 49: seq: 13, identify_response offset=1360 data=b'u~\xbb\x8ao\xde\x7f\\!bA\r}s>9\xba9\x1f\xc3\xff\xd1 Xl\x1fi\xf1rxts\x89\x0b\x17\x1f>]\xfc\x14'
Receive: 35 17470.912166 17470.905177 49: seq: 14, identify_response offset=1400 data=b'\xbf\xfb|\xf53\xba\xcb\x90\xfe\x1d\r\xae/n\x81*i\x0b\xb9IF\xe3\xc5\x10\x08o\xbe^\xf3ic\x84\xb6\xcfW\x17W\xef\xffy'
Receive: 36 17470.917437 17470.913143 49: seq: 15, identify_response offset=1440 data=b'\x15\x7f}\xff\xf1\xf2\xd3W|\xb61N\xae\xae>\xc3$K!\x1b\x95\xe4x\xd6\x15\x9cu\x85g\xc1\xea\xfb\xb3\x0f\xf1\xf9\xd9\xed%n'
Receive: 37 17470.925432 17470.920978 49: seq: 16, identify_response offset=1480 data=b'\xc3G\xad\xbe\x9c}Y\xc5\xab\xdb\xeb\xd5\xcf\xb0\xb2\xba\xc2\x95\xd9\x0bf \x1d\xe4D\x94\xb5S5o\x8a\x15\xfc\xa4;\x0c\x81\x06l\x1a'
Receive: 38 17470.933430 17470.926492 49: seq: 17, identify_response offset=1520 data=b'\xc77g\xc3\xc1\xe9\xbf\x87G\x8b\xff\x80\x98\xe7\xf8\xbd\xe0\xef\x0b\xfc\x06\x10\xa0\xc1%\x0e w\xa1\xc1\x15\x0e\xa0\x9e\xa4\xc1;\x1cL\r'
Receive: 39 17470.941421 17470.934613 49: seq: 18, identify_response offset=1560 data=b'\xff\x0f40\x1b\xfc\x88\x83\xc8l\xf0\x0f\x1c\xcc\r\xcfOt\x8c\xe1\xf9@\x03\xe4y\xe9A\x03\xa4\xac\xd4\x88\x18M&\x13\x90\xf8h\x90'
Receive: 40 17470.949421 17470.942385 49: seq: 19, identify_response offset=1600 data=b'\xe8h8\x9dg\x94\x0e\xb4\xb9\x8c\x86\xa3\xf1\x1d\\\xd8p\x99\xeb\xd1\xfb\xe1\xf50&)4\xc1\x06R\xcfXe\xe6\xd1\x05\x19\xc7\x9a\x83'
Receive: 41 17470.957422 17470.950372 49: seq: 1a, identify_response offset=1640 data=b')\x17\x90g9\xda\xf8\xb3\xb0iY\xc6\x80y\x91\x94\xa2\xacZ\x01\xc6.\x100\x04`\x1c\x03\x9b \x9b\x15\x8f[\x05\xdfl{Z\xd4'
Receive: 42 17470.965414 17470.958348 49: seq: 1b, identify_response offset=1680 data=b'\xe0=p\x12#\xb2\xe5\xed\xb4\xa4\xd8\xd6\x8c\xc4\xbaj\x04\x98\xc1\xdf\xedXi\\\xcdh\x9e\xa64\xe7\x13\xc0\xfa\x97\x16\x03\x02\xd4\x1c\x1b'
Receive: 43 17470.970689 17470.966420 49: seq: 1c, identify_response offset=1720 data=b'\x10\x08\x12\xf9\xa4E\xea\xc4\x88\xc9\x15\x16g\x9a\x86X#)\x9a<\xe7\xc3<K\xb1\x83\xb6\x06Ie)l\x11\xe2\xf8\xc1\xe8.\xb8\xe3'
Receive: 44 17470.978689 17470.974242 49: seq: 1d, identify_response offset=1760 data=b'\x83]\x0709!\x9b\xa6j(\xd5\xb4\x0b\x8d\x84\x10\xa6[\xea\xfb\xbcK\xe0\xbe\x99h+AH\x81\xb5098\x83\xfa{\x0e\xb0\xe2'
Receive: 45 17470.986671 17470.979660 49: seq: 1e, identify_response offset=1800 data=b'\xecrE-\x160/\xc1\x1d\x10\xae\n\xec\xbam>\xf8>\x0e\xc7AFhKeZQ\x94\x05\xfb9 CQ\x93B\xb6\xb8-:'
Receive: 46 17470.994665 17470.987624 49: seq: 1f, identify_response offset=1840 data=b'\xae],\xaa\x07i\xa5\x15X/\xa3\xc7\xfbeW]\xbbz\x9a{+{\xeb&\x89t\xe7O\x03\xd1A\xc1\x82\xcd\x12\xcb\x13;\x8be'
Receive: 47 17471.002723 17470.995762 49: seq: 10, identify_response offset=1880 data=b'\xb0\xc5\x95\xf1\xbc7or\x9ft\xabj\xc38\x89\xfa\x04\xf0D]\xed\xef\xa4\xb9q`)z\xd9O\xb0\x0b\x02\xe3u\xf2\x84v\xbc\xb0'
Receive: 48 17471.010672 17471.003970 49: seq: 11, identify_response offset=1920 data=b'\n\xe5R\xfbZj\x9dl\xa4\x80j\x08b\x95}P\xd8\xf2Zi\xb46\r\xe9c\xd6\xe5X\x8d\x013\x86vaP\x93\x1cC>H'
Receive: 49 17471.018675 17471.011761 49: seq: 12, identify_response offset=1960 data=b'|\t\x8c\xea\xaf3l\x93&#g0\xd4Xl_\xa3\xfa)\xdb\x11\xf0\xd5\xac\xf3\xea\x91\xd3\xa5\x8f\xe0\x05\x89\xb0\xa6q!\x08u\xa6'
Receive: 50 17471.023933 17471.019681 49: seq: 13, identify_response offset=2000 data=b";\x0b\xe0\x17\xbc\x80\x19w\xb8\xa0\xca\x9a\x93\n.6h\xa9DI\xfd\xf4\x94\xd0\xd5yG\xddT\x1bPf\x01\xa2'x\xb75De"
Receive: 51 17471.031936 17471.027508 49: seq: 14, identify_response offset=2040 data=b'\x90\x12\x94-\xd1\xb11`\x7f\x96\xe6Rh\xcc\xe8yp\x0c\xaa\x1a\x9e\x01-\x1d\x9b{+G\xb0\xa7\x1d\xf1\xa8\xf2\x1c\x82U\n\xfb\xf5'
Receive: 52 17471.039929 17471.032870 49: seq: 15, identify_response offset=2080 data=b'\xda#\x1c~=\xa7\xd3\xd078\xb0)\xb7\x02/\xe57$\x01\x90B\x15]a\xe7\xacs\x80e\xadl\x0b\x84\x8a1\xd8\x8c\xfc\x9a0'
Receive: 53 17471.053202 17471.040881 49: seq: 16, identify_response offset=2120 data=b'*\xecu\xae\x8c\xa3\xb7U%\xd6\t\xdd\x8eo\x86\xb5\xe7\x97\xd0\xa4Pe@HM\x1f\x0e\xdc_H\x1f\xc8\tqZK\xaa\xa5oK'
Receive: 54 17471.060770 17471.054615 49: seq: 17, identify_response offset=2160 data=b'\xdd\xd5\x18\xab%;=!-\xf6\x81\xbe&m\xba\xcd\xaa\rk\xf1;\xeeCR\xe3\x18\xaa\x94\xae\xbc\x87\x8d\x111\xb8\xa7\x17\xcck\xbf'
Receive: 55 17471.068677 17471.062065 49: seq: 18, identify_response offset=2200 data=b'\x00\x96\xc9>\x02\x90\xa2\x01\t\xd1\x83!\x0b\x80zS\xf3\xfbN|3\x8b\x01\xad*s\xc0\xc0\x07\xd8 \xb9\xcb-\xb4\xb9\xeb/\xa9\xd0'
Receive: 56 17471.076680 17471.069773 49: seq: 19, identify_response offset=2240 data=b'\x14&9\xe1$|\xa7\xb2=\x15\x9f\x00\\\x19\x9a\xd0\xa6q\xee;\xae\xa3\xa8\xd7\xedp\xd6t\xc03nWh\xacO\xb1\xc3\xcb&\x93'
Receive: 57 17471.084667 17471.077728 49: seq: 1a, identify_response offset=2280 data=b'\xc22.M]\xfeD\xd0B\xaa\xcb\x93\x06c\x0b\x16\x18\x072\x13|/\xb6nlK\x198f\xdf\xc1|\x0cB\xd7^\xeb\x06c\x17'
Receive: 58 17471.092671 17471.085658 49: seq: 1b, identify_response offset=2320 data=b'\xa4\x0f\x93\xd1"\x8a(\x14\x9a\xc1\x8cb!\x0ff\x11=>\x0cf\xb39|O^^\xa8~\xa8\x01\x1b$\xb7\xf4M\xab\x1a&\xe1\xbd'
Receive: 59 17471.100675 17471.093656 49: seq: 1c, identify_response offset=2360 data=b'm\x86D\xe9\xbdK\xca\x92\x0ct\xf5@\x9d\xe8\xf4\xbfq+\x8b\x9a\xbe\xc9B(\x8dZ\xe2\x13\x9bj8\xccR5Bo\x99\xca\x9d\x9a'
Receive: 60 17471.108671 17471.101754 49: seq: 1d, identify_response offset=2400 data=b'\xfb\x18-\xfc`\xf5\xeck&S\xe9\xd9<\x90\xeb\x8dp\xbb\xbb\x8e\xbc\x98\xb8\xd6j]\xe1\xdf\\\x05\xbf\x00`a\xb1\x8c\xd0\x94L\x15'
Receive: 61 17471.113931 17471.109717 49: seq: 1e, identify_response offset=2440 data=b"\xdek\xba\xec\\1(F\x96C\xff\xdbC\x8f#\tJlA+\xe6:\xd4p\xa6J\xcc'\xbc\x0b\xd7\x93\x830m\xfa5tAj"
Receive: 62 17471.125915 17471.118755 49: seq: 1f, identify_response offset=2480 data=b'\xeb\xe0\x9c\xb5O\xaa3\x00\x1fC\xb9\x17d\xe0T\xb9\x7fKj\xc3a>b\x7f\xfa1FA\xdbK\xa3\x87\xb5\xad\xb1\xc5\xcc\xb7\xa2z'
Receive: 63 17471.133918 17471.126952 49: seq: 10, identify_response offset=2520 data=b";o+\xa8\x957\xfbg\x84\x9d.`_\xf8\xeeNl\r\xc9'\xe0<f\xb5,\xa7\xbe\x81\x13\x90\xbaN\x0e\xdb\xc3\t\x92\x82\xc6\x03"
Receive: 64 17471.141918 17471.134871 49: seq: 11, identify_response offset=2560 data=b'\x85\x88\xdd,\x8du2\x07\xcf\xb1\xbd\x85?cd\x18v\x0f\xf6"\xfe/#\xeb\xf6\x8d\xec\x181\xd25\x9c\xfa\x8e\xa4\xbb4\xa5\xee\x7f'
Receive: 65 17471.149918 17471.142890 49: seq: 12, identify_response offset=2600 data=b'\x8at\xa0\x11\xd0B\xd8\xf3\\`%\xe8\x11\xdc\xb6\x87\x0e*`1\x0cS\xe1?\xa5\x82e\xc8\x11Tr!\x03\xfa\xe3\xf0P\xfd\xbd\xf7'
Receive: 66 17471.157920 17471.150874 49: seq: 13, identify_response offset=2640 data=b'\xbea\x8f%x\xe8cD\xc9\xb0\xe0\xfd#\xc3\xa0\xba\x16\xc0\x912\xe3\xf9\x82\xd3r\xed\xadYw\x85\xf9\xa3\x7fa\xa3\x1d\xf9\x12v\xa7'
Receive: 67 17471.163183 17471.158907 49: seq: 14, identify_response offset=2680 data=b'\xbe\xe5\x96\x1e\xa4\xf7\x8b\xf9\x0eF~\x0b\xd1\\\x17(\xc0\xb0\xb1/z\xf7\xe5\xc7r\x97U\x1a\x85\x85\xacw\x9f4qU\xf5\xc1&p'
Receive: 68 17471.171186 17471.166798 49: seq: 15, identify_response offset=2720 data=b'\x08\r\x14\x02(\x07\xe7_D\xbap\x11K\x17\xf3\xc3-\x94z\x0f\xc3\x93\xd1\xe8dx\x1c\xcd\x8e7\xebe\x96\xacGc9x\xf9\x1d'
Receive: 69 17471.175178 17471.172125 13: seq: 16, identify_response offset=2760 data=b'v\x93\x04\xa0'
Receive: 70 17471.179176 17471.176122 9: seq: 17, identify_response offset=2764 data=b''
Receive: 71 17471.207800 17471.204762 11: seq: 18, uptime high=0 clock=70976701
Receive: 72 17471.264308 17471.260096 10: seq: 19, clock clock=71862089
Receive: 73 17471.322048 17471.317569 10: seq: 1a, clock clock=72781433
Receive: 74 17471.378767 17471.374068 10: seq: 1b, clock clock=73684993
Receive: 75 17471.432843 17471.430871 10: seq: 1c, clock clock=74593784
Receive: 76 17471.489362 17471.485882 10: seq: 1d, clock clock=75474655
Receive: 77 17471.547128 17471.542732 10: seq: 1e, clock clock=76384194
Receive: 78 17471.604847 17471.599692 10: seq: 1f, clock clock=77295194
Receive: 79 17471.661346 17471.657351 10: seq: 10, clock clock=78217797
Receive: 80 17471.670612 17471.665146 10: seq: 11, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 81 17471.670633 17471.665413 10: seq: 12, clock clock=78346345
Receive: 82 17471.723383 17471.716461 15: seq: 13, config is_config=1 crc=986463129 is_shutdown=0 move_count=584
Receive: 83 17471.772069 17471.761614 15: seq: 14, stats count=177 sum=509377 sumsq=40350439
Receive: 84 17471.797596 17471.790149 8: seq: 1c, stepper_position oid=8 pos=0
Receive: 85 17471.805373 17471.800598 8: seq: 1d, stepper_position oid=11 pos=0
Receive: 86 17471.809369 17471.807104 8: seq: 1e, stepper_position oid=14 pos=0
Receive: 87 17471.813392 17471.811566 8: seq: 1f, stepper_position oid=19 pos=0
Receive: 88 17472.653331 17472.650097 10: seq: 11, clock clock=94100508
Receive: 89 17472.952143 17472.650097 13: seq: 11, thermocouple_result oid=18 next_clock=103680000 value=0 fault=0
Receive: 90 17473.001182 17472.650097 13: seq: 11, analog_in_state oid=22 next_clock=104320000 value=2743
Receive: 91 17473.014007 17472.650097 10: seq: 11, buttons_state oid=24 ack_count=0 state=b'\x0f'
Receive: 92 17473.251047 17473.030441 13: seq: 10, thermocouple_result oid=18 next_clock=108480000 value=0 fault=0
Receive: 93 17473.300108 17473.030441 13: seq: 10, analog_in_state oid=22 next_clock=109120000 value=2740
Receive: 94 17473.554222 17473.030441 13: seq: 10, thermocouple_result oid=18 next_clock=113280000 value=0 fault=0
Receive: 95 17473.599486 17473.030441 13: seq: 10, analog_in_state oid=22 next_clock=113920000 value=2735
Receive: 96 17473.636103 17473.634411 10: seq: 11, clock clock=109849093
Receive: 97 17473.852935 17473.835892 13: seq: 1f, thermocouple_result oid=18 next_clock=118080000 value=0 fault=0
Receive: 98 17473.902134 17473.893081 11: seq: 1e, shutdown clock=114048160 static_string_id=ADC out of range
Transition to shutdown state: MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Dumping gcode input 0 blocks
Dumping 20 requests for client 1966818856
Received 17470.996832: b'{"id": 1720487480, "method": "info", "params": {}}'
Received 17471.252080: b'{"id": 1720487480, "method": "info", "params": {}}'
Received 17471.507129: b'{"id": 1720270680, "method": "info", "params": {}}'
Received 17471.762643: b'{"id": 1720270440, "method": "info", "params": {}}'
Received 17472.017908: b'{"id": 1720270416, "method": "info", "params": {}}'
Received 17472.021519: b'{"id": 1720487696, "method": "list_endpoints", "params": {}}'
Received 17472.035224: b'{"id": 1720270320, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 17472.211305: b'{"id": 1720270488, "method": "objects/list", "params": {}}'
Received 17472.215364: b'{"id": 1720270272, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 17472.220089: b'{"id": 1720270272, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 17472.224486: b'{"id": 1720270272, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 17472.228714: b'{"id": 1720270272, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 17472.236513: b'{"id": 1720269888, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 17472.237501: b'{"id": 1720270368, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 17472.246042: b'{"id": 1720269192, "method": "info", "params": {}}'
Received 17472.247426: b'{"id": 1720268832, "method": "objects/list", "params": {}}'
Received 17472.247426: b'{"id": 1720268496, "method": "gcode/help", "params": {}}'
Received 17472.264379: b'{"id": 1720268712, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "configfile": null, "mcu": null, "heaters": null, "heater_fan\\u00a0extruder_fan": null, "fan": null, "heater_bed": null, "display_status": null, "pca9533\\u00a0led_strip": null, "motion_report": null, "query_endstops": null, "gcode_move": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 17472.477006: b'{"id": 1720269792, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "heaters": null, "heater_fan\\u00a0extruder_fan": null, "fan": null, "display_status": null, "pca9533\\u00a0led_strip": null, "motion_report": null, "query_endstops": null, "gcode_move": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 17472.479167: b'{"id": 1720269552, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "heaters": null, "heater_fan\\u00a0extruder_fan": null, "fan": null, "display_status": null, "pca9533\\u00a0led_strip": null, "motion_report": null, "query_endstops": null, "gcode_move": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (17472.238398282, 0.0, 0.0)
Stats 17474.9: gcodein=0  mcu: mcu_awake=0.032 mcu_task_avg=0.000180 mcu_task_stddev=0.000442 bytes_write=10818 bytes_read=6305 bytes_retransmit=193 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=305 srtt=0.007 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999157 heater_bed: target=0 temp=138.8 pwm=0.000 sysload=1.39 cputime=5.199 memavail=572000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17475.9: gcodein=0  mcu: mcu_awake=0.032 mcu_task_avg=0.000180 mcu_task_stddev=0.000442 bytes_write=10824 bytes_read=6359 bytes_retransmit=193 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=305 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999234 heater_bed: target=0 temp=138.9 pwm=0.000 sysload=1.36 cputime=5.223 memavail=572024 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17476.9: gcodein=0  mcu: mcu_awake=0.184 mcu_task_avg=0.000488 mcu_task_stddev=0.000546 bytes_write=10830 bytes_read=6430 bytes_retransmit=193 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=305 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999243 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.36 cputime=5.249 memavail=571280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17477.9: gcodein=0  mcu: mcu_awake=0.184 mcu_task_avg=0.000488 mcu_task_stddev=0.000546 bytes_write=10836 bytes_read=6497 bytes_retransmit=193 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=305 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999241 heater_bed: target=0 temp=138.5 pwm=0.000 sysload=1.36 cputime=5.274 memavail=571284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17478.9: gcodein=0  mcu: mcu_awake=0.184 mcu_task_avg=0.000488 mcu_task_stddev=0.000546 bytes_write=10842 bytes_read=6551 bytes_retransmit=193 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=305 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999244 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=1.36 cputime=5.300 memavail=571284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17479.9: gcodein=0  mcu: mcu_awake=0.184 mcu_task_avg=0.000488 mcu_task_stddev=0.000546 bytes_write=10848 bytes_read=6608 bytes_retransmit=193 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=305 srtt=0.006 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999240 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.36 cputime=5.325 memavail=570992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17480.9: gcodein=0  mcu: mcu_awake=0.184 mcu_task_avg=0.000488 mcu_task_stddev=0.000546 bytes_write=10854 bytes_read=6680 bytes_retransmit=193 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=305 srtt=0.006 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999237 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.33 cputime=5.352 memavail=571048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17481.9: gcodein=0  mcu: mcu_awake=0.184 mcu_task_avg=0.000488 mcu_task_stddev=0.000546 bytes_write=10860 bytes_read=6738 bytes_retransmit=193 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=305 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999238 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.33 cputime=5.377 memavail=571048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17482.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10866 bytes_read=6809 bytes_retransmit=193 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=305 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999242 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.33 cputime=5.405 memavail=571048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17483.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10872 bytes_read=6881 bytes_retransmit=193 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=305 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999239 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.33 cputime=5.430 memavail=570320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17484.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10878 bytes_read=6939 bytes_retransmit=193 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=305 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999239 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.33 cputime=5.456 memavail=570320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17485.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10884 bytes_read=6997 bytes_retransmit=193 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=305 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999237 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.30 cputime=5.481 memavail=569828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17486.9: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10890 bytes_read=7069 bytes_retransmit=193 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=305 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999233 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.30 cputime=5.508 memavail=569828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17487.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=10896 bytes_read=7140 bytes_retransmit=193 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=305 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999231 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.30 cputime=5.533 memavail=569828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17488.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=10902 bytes_read=7198 bytes_retransmit=193 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=305 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999230 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.30 cputime=5.560 memavail=570084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1966818856: Disconnected
Restarting printer
Start printer at Mon Jan 30 23:04:44 2023 (1675137884.9 17490.5)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1966541792: New connection
webhooks client 1966541792: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Unable to issue reset command on MCU 'mcu'
webhooks client 1966541792: Disconnected
Restarting printer
Start printer at Mon Jan 30 23:05:12 2023 (1675137912.0 17517.6)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1948000016: New connection
webhooks client 1948000016: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
Starting Klippy...
Args: ['/home/pi/klipper/klippy/klippy.py', '/home/pi/printer_data/config/printer.cfg', '-I', '/home/pi/printer_data/comms/klippy.serial', '-l', '/home/pi/printer_data/logs/klippy.log', '-a', '/home/pi/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-56-gf9daf12e'
CPU: 4 core ARMv7 Processor rev 5 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
Start printer at Mon Jan 30 23:06:30 2023 (1675137990.2 17595.7)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1967081024: New connection
webhooks client 1967081024: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
mcu 'mcu': Timeout on connect
MCU error during connect
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/mcu.py", line 778, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/pi/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/pi/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/pi/klipper/klippy/mcu.py", line 783, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/pi/klipper/klippy/../.config(1267): Mon Jan 30 23:03:04 2023
========= Last MCU build config =========
# CONFIG_LOW_LEVEL_OPTIONS is not set
CONFIG_MACH_AVR=y
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_LINUX is not set
# CONFIG_MACH_SIMU is not set
CONFIG_AVR_SELECT=y
CONFIG_BOARD_DIRECTORY="avr"
# CONFIG_MACH_atmega2560 is not set
CONFIG_MACH_atmega1280=y
# CONFIG_MACH_at90usb1286 is not set
# CONFIG_MACH_at90usb646 is not set
# CONFIG_MACH_atmega32u4 is not set
# CONFIG_MACH_atmega1284p is not set
# CONFIG_MACH_atmega644p is not set
# CONFIG_MACH_atmega328p is not set
# CONFIG_MACH_atmega328 is not set
# CONFIG_MACH_atmega168 is not set
CONFIG_MCU="atmega1280"
CONFIG_AVRDUDE_PROTOCOL="arduino"
CONFIG_CLOCK_FREQ=16000000
CONFIG_AVR_CLKPR=-1
CONFIG_AVR_STACK_SIZE=256
CONFIG_AVR_WATCHDOG=y
CONFIG_SERIAL=y
CONFIG_SERIAL_BAUD_U2X=y
CONFIG_SERIAL_PORT=0
CONFIG_SERIAL_BAUD=250000
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_CANBUS_FREQUENCY=500000
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_HAVE_GPIO_BITBANGING=y
CONFIG_HAVE_STRICT_TIMING=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/pi/klipper/klippy/../out/klipper.dict(7649): Mon Jan 30 23:03:27 2023
Last MCU build version: v0.11.0-56-gf9daf12e
Last MCU build tools: gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125
Last MCU build config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256
Build file /home/pi/klipper/klippy/../out/klipper.elf(293860): Mon Jan 30 23:03:41 2023
mcu 'mcu': Wait for identify_response
Traceback (most recent call last):
  File "/home/pi/klipper/klippy/serialhdl.py", line 68, in _get_identify_data
    params = self.send_with_response(msg, 'identify_response')
  File "/home/pi/klipper/klippy/serialhdl.py", line 259, in send_with_response
    return src.get_response([cmd], self.default_cmd_queue)
  File "/home/pi/klipper/klippy/serialhdl.py", line 316, in get_response
    self.serial.raw_send_wait_ack(cmds[-1], minclock, reqclock,
  File "/home/pi/klipper/klippy/serialhdl.py", line 251, in raw_send_wait_ack
    self._error("Serial connection closed")
  File "/home/pi/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Serial connection closed
webhooks client 1967081024: Disconnected
Restarting printer
Start printer at Mon Jan 30 23:11:40 2023 (1675138300.8 17906.4)
===== Config file =====
[stepper_x]
step_pin = PF1
dir_pin = !PF0
enable_pin = !PF2
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL1
position_endstop = 152
position_max = 153
position_min = -120
homing_speed = 50

[stepper_y]
step_pin = PF5
dir_pin = !PF4
enable_pin = !PF6
microsteps = 16
rotation_distance = 32
endstop_pin = ^!PL3
position_endstop = 77
position_max = 78
position_min = -84
homing_speed = 50

[stepper_z]
step_pin = PK1
dir_pin = !PK0
enable_pin = !PK2
microsteps = 16
rotation_distance = 8
endstop_pin = !PL6
position_endstop = 0
position_max = 230
position_min = 0

[extruder]
step_pin = PA3
dir_pin = !PA2
enable_pin = !PA4
microsteps = 16
rotation_distance = 33.238
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PH3
sensor_type = MAX6675
sensor_pin = PE3
spi_software_miso_pin = PE5
spi_software_sclk_pin = PE2
spi_software_mosi_pin = PA1
control = pid
pid_kp = 26.414
pid_ki = 1.115
pid_kd = 156.5054
min_temp = 0
max_temp = 260

[heater_fan extruder_fan]
pin = PH4

[fan]
pin = PL5

[heater_bed]
heater_pin = PL4
sensor_type = Generic 3950
sensor_pin = PK7
control = pid
pid_kp = 70.037
pid_ki = 1.710
pid_kd = 717.000
min_temp = 0
max_temp = 130

[mcu]
serial = /dev/serial/by-id/usb-MakerBot_Industries_The_Replicator_A4139373530351C001D0-if00
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[mcp4018 x_axis_pot]
scl_pin = PJ5
sda_pin = PF3
wiper = 0.50
scale = 0.773

[mcp4018 y_axis_pot]
scl_pin = PJ5
sda_pin = PF7
wiper = 0.50
scale = 0.773

[mcp4018 z_axis_pot]
scl_pin = PJ5
sda_pin = PK3
wiper = 0.50
scale = 0.773

[mcp4018 a_axis_pot]
scl_pin = PJ5
sda_pin = PA5
wiper = 0.50
scale = 0.773

[mcp4018 b_axis_pot]
scl_pin = PJ5
sda_pin = PJ6
wiper = 0.50
scale = 0.773

[display]
lcd_type = hd44780_spi
spi_software_mosi_pin = PC3
spi_software_sclk_pin = PC2
spi_software_miso_pin = PJ1
latch_pin = PC4
click_pin = ^PJ0
back_pin = ^PJ2
up_pin = ^PJ4
down_pin = ^PJ3

[pca9533 led_strip]
i2c_bus = twi
i2c_address = 98
initial_red = 1
initial_green = 1
initial_blue = 1
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 1967175640: New connection
webhooks client 1967175640: Client info {'program': 'Moonraker', 'version': 'v0.7.1-826-g1bad68c'}
Loaded MCU 'mcu' 108 commands (v0.11.0-56-gf9daf12e / gcc: (GCC) 5.4.0 binutils: (GNU Binutils) 2.26.20160125)
MCU 'mcu' config: ADC_MAX=1023 BUS_PINS_spi=PB3,PB2,PB1 BUS_PINS_twi=PD0,PD1 CLOCK_FREQ=16000000 MCU=atmega1280 PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PE0,PE1 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (584 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 17910.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2094 bytes_read=4233 bytes_retransmit=0 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=0 srtt=0.005 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=6144 freq=15998957 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.14 cputime=9.719 memavail=571288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1967175640
webhooks: registering remote method 'reboot_machine' for connection id: 1967175640
webhooks: registering remote method 'pause_job_queue' for connection id: 1967175640
webhooks: registering remote method 'start_job_queue' for connection id: 1967175640
Stats 17911.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=8973 bytes_read=4917 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.007 rttvar=0.005 rto=0.026 ready_bytes=0 stalled_bytes=0 freq=15999069 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.12 cputime=9.823 memavail=571296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
MCU 'mcu' shutdown: ADC out of range
clocksync state: mcu_freq=16000000 last_clock=209943064 clock_est=(17909.750 188755006 15999069.278) min_half_rtt=0.000757 min_rtt_time=17910.079 time_avg=17909.749(0.081) clock_avg=188755006.994(1293730.067) pred_variance=182421718.411
Dumping serial stats: bytes_write=10167 bytes_read=5139 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=305 retransmit_seq=0 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=613 stalled_bytes=0
Dumping send queue 100 messages
Sent 0 17910.820340 17910.817900 61: seq: 1d, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'`', spi_send oid=6 data=b'h', spi_send oid=6 data=b'`', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 1 17910.824414 17910.821974 61: seq: 1e, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 2 17910.828412 17910.825972 61: seq: 1f, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 3 17910.830852 17910.825972 61: seq: 10, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 4 17910.833292 17910.829906 61: seq: 11, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 5 17910.836341 17910.833901 61: seq: 12, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 6 17910.838781 17910.833901 61: seq: 13, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 7 17910.841221 17910.837900 61: seq: 14, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'p', spi_send oid=6 data=b'x', spi_send oid=6 data=b'p', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00'
Sent 8 17910.845594 17910.843154 61: seq: 15, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 9 17910.848034 17910.843154 61: seq: 16, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 10 17910.850474 17910.847150 61: seq: 17, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 11 17910.853592 17910.851152 61: seq: 18, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 12 17910.857587 17910.855147 61: seq: 19, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02'
Sent 13 17910.861588 17910.859148 61: seq: 1a, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 14 17910.865587 17910.863147 61: seq: 1b, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 15 17910.869592 17910.867152 61: seq: 1c, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 16 17910.873590 17910.871150 61: seq: 1d, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 17 17910.877591 17910.875151 61: seq: 1e, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\xa8', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 18 17910.880031 17910.875151 61: seq: 1f, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 19 17910.882471 17910.879148 61: seq: 10, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 20 17910.885593 17910.883153 61: seq: 11, spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'@', spi_send oid=6 data=b'H', spi_send oid=6 data=b'@', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':'
Sent 21 17910.889688 17910.887248 61: seq: 12, spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02'
Sent 22 17910.893694 17910.891254 61: seq: 13, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 23 17910.897687 17910.895247 61: seq: 14, spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*'
Sent 24 17910.900127 17910.895247 61: seq: 15, spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 25 17910.902951 17910.900511 61: seq: 16, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 26 17910.906925 17910.904485 61: seq: 17, spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 27 17910.909365 17910.904485 61: seq: 18, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02'
Sent 28 17910.911805 17910.908554 61: seq: 19, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 29 17910.914897 17910.912457 61: seq: 1a, spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xc8', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\xa8', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J'
Sent 30 17910.918925 17910.916485 61: seq: 1b, spi_send oid=6 data=b'B', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xe2'
Sent 31 17910.922818 17910.920378 61: seq: 1c, spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 32 17910.926777 17910.924337 61: seq: 1d, spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*'
Sent 33 17910.930781 17910.928341 61: seq: 1e, spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02'
Sent 34 17910.934757 17910.932317 61: seq: 1f, spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R'
Sent 35 17910.938759 17910.936319 61: seq: 10, spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z'
Sent 36 17910.943133 17910.940693 61: seq: 11, spi_send oid=6 data=b'r', spi_send oid=6 data=b'\x92', spi_send oid=6 data=b'\x9a', spi_send oid=6 data=b'\x92', spi_send oid=6 data=b'@', spi_send oid=6 data=b'H', spi_send oid=6 data=b'@', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B'
Sent 37 17910.945573 17910.940693 61: seq: 12, spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2'
Sent 38 17910.948163 17910.945723 61: seq: 13, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\xaa', spi_send oid=6 data=b'\xa2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 39 17910.952083 17910.949643 61: seq: 14, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2'
Sent 40 17910.956096 17910.953656 61: seq: 15, spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2'
Sent 41 17910.958536 17910.953656 61: seq: 16, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 42 17910.960976 17910.958175 61: seq: 17, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'P', spi_send oid=6 data=b'X', spi_send oid=6 data=b'P', spi_send oid=6 data=b'\x80'
Sent 43 17910.964063 17910.961623 61: seq: 18, spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 44 17910.967992 17910.965552 61: seq: 19, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x82', spi_send oid=6 data=b'\x8a', spi_send oid=6 data=b'\x82', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'P', spi_send oid=6 data=b'X'
Sent 45 17910.972046 17910.969606 61: seq: 1a, spi_send oid=6 data=b'P', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\xc8', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'b'
Sent 46 17910.975988 17910.973548 61: seq: 1b, spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 47 17910.980110 17910.977670 61: seq: 1c, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 48 17910.983993 17910.981553 61: seq: 1d, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'R', spi_send oid=6 data=b'Z', spi_send oid=6 data=b'R', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x12'
Sent 49 17910.988045 17910.985605 61: seq: 1e, spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02'
Sent 50 17910.990485 17910.985605 61: seq: 1f, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 51 17910.992925 17910.989615 61: seq: 10, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xc2'
Sent 52 17910.996069 17910.993629 61: seq: 11, spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'p', spi_send oid=6 data=b'x', spi_send oid=6 data=b'p', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x08', spi_send oid=6 data=b'\x00', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2'
Sent 53 17910.999990 17910.997550 61: seq: 12, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a'
Sent 54 17911.005113 17911.002673 61: seq: 13, spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\x1a', spi_send oid=6 data=b'\x12', spi_send oid=6 data=b'\xf2'
Sent 55 17911.007553 17911.002673 61: seq: 14, spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B'
Sent 56 17911.073453 17911.073213 6: seq: 15, get_clock
Sent 57 17911.200456 17911.200136 8: seq: 16, buttons_ack oid=24 count=1
Sent 58 17911.209162 17911.208642 13: seq: 17, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 59 17911.209682 17911.208956 13: seq: 18, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\xb0'
Sent 60 17911.210042 17911.209097 9: seq: 19, spi_send oid=6 data=b'\xb8'
Sent 61 17911.210402 17911.209156 9: seq: 1a, spi_send oid=6 data=b'\xb0'
Sent 62 17911.210762 17911.209333 9: seq: 1b, spi_send oid=6 data=b'2'
Sent 63 17911.211122 17911.209481 9: seq: 1c, spi_send oid=6 data=b':'
Sent 64 17911.211482 17911.209587 9: seq: 1d, spi_send oid=6 data=b'2'
Sent 65 17911.211842 17911.209739 9: seq: 1e, spi_send oid=6 data=b'\x12'
Sent 66 17911.212202 17911.209838 9: seq: 1f, spi_send oid=6 data=b'\x1a'
Sent 67 17911.212562 17911.210006 9: seq: 10, spi_send oid=6 data=b'\x12'
Sent 68 17911.212922 17911.210164 9: seq: 11, spi_send oid=6 data=b'2'
Sent 69 17911.213282 17911.210281 9: seq: 12, spi_send oid=6 data=b':'
Sent 70 17911.214922 17911.211261 41: seq: 13, spi_send oid=6 data=b'2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\x82', spi_send oid=6 data=b'\x8a'
Sent 71 17911.215607 17911.215247 9: seq: 14, spi_send oid=6 data=b'\x82'
Sent 72 17912.008252 17912.007732 13: seq: 15, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 73 17912.008612 17912.008006 9: seq: 16, spi_send oid=6 data=b'\x80'
Sent 74 17912.008972 17912.008117 9: seq: 17, spi_send oid=6 data=b'\x00'
Sent 75 17912.009332 17912.008262 9: seq: 18, spi_send oid=6 data=b'\x08'
Sent 76 17912.009692 17912.008409 9: seq: 19, spi_send oid=6 data=b'\x00'
Sent 77 17912.010052 17912.008545 9: seq: 1a, spi_send oid=6 data=b'2'
Sent 78 17912.010412 17912.008629 9: seq: 1b, spi_send oid=6 data=b':'
Sent 79 17912.010772 17912.008791 9: seq: 1c, spi_send oid=6 data=b'2'
Sent 80 17912.011132 17912.008969 9: seq: 1d, spi_send oid=6 data=b'\xe2'
Sent 81 17912.011492 17912.009030 9: seq: 1e, spi_send oid=6 data=b'\xea'
Sent 82 17912.011852 17912.009189 9: seq: 1f, spi_send oid=6 data=b'\xe2'
Sent 83 17912.012212 17912.009334 9: seq: 10, spi_send oid=6 data=b'"'
Sent 84 17912.014012 17912.010207 45: seq: 11, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea'
Sent 85 17912.016641 17912.014201 61: seq: 12, spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x80'
Sent 86 17912.024635 17912.022195 61: seq: 13, spi_send oid=6 data=b'\x88', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'\xa8', spi_send oid=6 data=b'\xa0', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 87 17912.032643 17912.030203 61: seq: 14, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 88 17912.036641 17912.034201 61: seq: 15, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'@', spi_send oid=6 data=b'H', spi_send oid=6 data=b'@', spi_send oid=6 data=b'"'
Sent 89 17912.040651 17912.038211 61: seq: 16, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b'
Sent 90 17912.043091 17912.038211 61: seq: 17, spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x98', spi_send oid=6 data=b'\x90', spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'\x88'
Sent 91 17912.045531 17912.042431 61: seq: 18, spi_send oid=6 data=b'\x80', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'b'
Sent 92 17912.049879 17912.047439 61: seq: 19, spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'\xca', spi_send oid=6 data=b'\xc2', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 93 17912.053864 17912.051424 61: seq: 1a, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 94 17912.057862 17912.055422 61: seq: 1b, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"'
Sent 95 17912.060302 17912.055422 61: seq: 1c, spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"'
Sent 96 17912.062742 17912.059430 61: seq: 1d, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n'
Sent 97 17912.065860 17912.063420 61: seq: 1e, spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'"', spi_send oid=6 data=b'*', spi_send oid=6 data=b'"', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'\n', spi_send oid=6 data=b'\x02', spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xea', spi_send oid=6 data=b'\xe2', spi_send oid=6 data=b'\xc0'
Sent 98 17912.069861 17912.067421 61: seq: 1f, spi_send oid=6 data=b'\xc8', spi_send oid=6 data=b'\xc0', spi_send oid=6 data=b'\x10', spi_send oid=6 data=b'\x18', spi_send oid=6 data=b'\x10', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b'
Sent 99 17912.073857 17912.071417 61: seq: 10, spi_send oid=6 data=b'2', spi_send oid=6 data=b':', spi_send oid=6 data=b'2', spi_send oid=6 data=b'r', spi_send oid=6 data=b'z', spi_send oid=6 data=b'r', spi_send oid=6 data=b'B', spi_send oid=6 data=b'J', spi_send oid=6 data=b'B', spi_send oid=6 data=b'b', spi_send oid=6 data=b'j', spi_send oid=6 data=b'b', spi_send oid=6 data=b'\xf2', spi_send oid=6 data=b'\xfa'
Dumping receive queue 97 messages
Receive: 0 17909.052364 17909.046954 48: seq: 11, identify_response offset=0 data=b'x\xda\xa5Y\xe9n\x1c\xb9\x11~\x15\xee\x00F\xb2\x81$\xcc\xd5s(\xf0\x0f]\xdeu\xd6\xb2\xb5\x1e+\x0e\x10\x04\x8dV7g\x86Q'
Receive: 1 17909.060304 17909.053382 48: seq: 12, identify_response offset=40 data=b'_\xdb\xec\xd6\xb1\x0b\xbd\xfb\xd6\xc1\xabgF\xdeEb\xc0P\x93\xac"\x8b\xc5\xaa\xaf\x8e\xf9mp\xd7\xa9<\x8b\x1fd\xa3UU\xea\xc1'
Receive: 2 17909.065613 17909.061275 48: seq: 13, identify_response offset=80 data=b'\xe9`\x93\xa6\xa7\xe2\xaf?\\\\|/\xa2\x93\xe9\xc9P\xdc\xa9\xb2kU\xaeq\xf6\xe3\xad87\xc3\xef\xc5\xf8d<;\x19\x0fG\xb3'
Receive: 3 17909.073614 17909.069132 49: seq: 14, identify_response offset=120 data=b'\xe1h\x1c\r\x8e\x06iU\x14I\x99\xc1&\xbf\r\x92<\xaf\xd2\xa4\x95q\xa52-\xd2\xaa+\xdb\xb7o\xd2\xc1\xe9\xe2\x08Nl[8'
Receive: 4 17909.081553 17909.074582 49: seq: 15, identify_response offset=160 data=b'*N\xd2{\x01\xab0\x1d\xac\xcff\x01A\x96Y\x82\xba\xd2\xf4G\x95o\xdft\xa2\xee\xf2<\xeejf\x08v\xfc\xa5\x93\xcd\xb3\xdb\x13'
Receive: 5 17909.089594 17909.082573 49: seq: 16, identify_response offset=200 data=b'\x04\xb8G\xeaF\xea6nUz\xafy\xd46I\xa9\x0b\xd5\xc6\xf6T\xa1J\xb8\xbf9\x7f\x0e\xf7\xc8e\xd2\xc4z\xdb\xb5Y\xf5X\x0e'
Receive: 6 17909.097551 17909.090503 49: seq: 17, identify_response offset=240 data=b'N\xc7x\xb5r\xad6 \x91\x1e\x8dF\x0b{\x84\xaeU\xfc\xed\xd3\x8a\xe4)\x86\xdd\x93\\e\xb1\xbf\xe4to\xc78\xdd&e)s'
Receive: 7 17909.105551 17909.098475 49: seq: 18, identify_response offset=280 data=b"w_U\xc6eW\xdc\xc9\x06G\x05\x8ctR\xd4\xb9\x8ca\xabN\xbe}\xb3U\x82\xf6\xde\x9b\xad\x93F\x96\xad\x91\nN\x1a\x05'="
Receive: 8 17909.113550 17909.106586 49: seq: 19, identify_response offset=320 data=b'\xe5\x93i\xb4/\xfb\xe04\x9ax\xaa2\xc9\xab\r\xc8\x1cH\x02\x17\x19\x9cN\xbc\xccF\xdd\x96\x82\x87\xc1\xf5fKGJ\x93\xb2\xe9o'
Receive: 9 17909.118857 17909.114487 49: seq: 1a, identify_response offset=360 data=b'\xd6{\xbf\xf9\xcc\x11gj\xa3\xda$\x8f\xab\xae\xdda0\xf7KE&\xd7I\x97\xb7\xb1\x9b@%d]\x93\xb4`\xbd$\xe7h\xee\xf6'
Receive: 10 17909.126856 17909.122328 49: seq: 1b, identify_response offset=400 data=b'\x93`\x8bmU\xf7\xf6J{\x87\x8f\xfd\xe1\xdbl:\x9d/\x86\x96\xb8\xd1\xb19[\xda\x8fl\xea\xbe"\xf75s_s\xf7%\xf3\xe4'
Receive: 11 17909.134802 17909.127719 49: seq: 1c, identify_response offset=440 data=b'\xd9\x99\x00\xa8#r\x87\xa8qj\x0f\x80OP$\x9b$\xf8\t\xfe\x05{\x07\xeba\xa6\xa9\x97\xac\xa8\xbb\xe58\x1a\x86\x8c\xee\xe1\xbc\xa6'
Receive: 12 17909.142848 17909.135821 49: seq: 1d, identify_response offset=480 data=b'KY\xd5\xea\xa9gA$L\xd2&\xb1V\xbf\xa2ut\xe0\xcam\x8c\x1a\x0b\xbcAK\x98\x02\xfb\xf2\xf2\xce\xa7n\xd3\xfa\xb18\xf0\x1a'
Receive: 13 17909.150804 17909.143810 49: seq: 1e, identify_response offset=520 data=b'\xe93x\x88\xdf\xc3\x1a_\xb7\xfb:\xdbn\xffy\xa6^b\xb0\xc0\xdd\x8d\x11\x14Z\xf5 \xe3\xad\xdal\xe9\x86\x93EH\x0f\xe6\xb9\xc9'
Receive: 14 17909.158959 17909.151769 49: seq: 1f, identify_response offset=560 data=b'\xe5\x01\xf7skq\xfb\\K\xd6\xcd\xac\xc7i\xdd\xf9\x10\xb3Y\x8a\x0b\xbdy\xfb\xe6o\x80_\x93I\x8f\xf7Q\xb5[PC\x9cZ\x9b'
Receive: 15 17909.166844 17909.160153 49: seq: 10, identify_response offset=600 data=b'\x07\nof\xba\x9d/\xc7\xeeyRg8:\xcd\xef\xdd7\xf8\xbf\xfd|.\xd3\xb8o#"-\xb2x\xcfl\xc6\xc1\t\xb2\xae\xbd\x17'
Receive: 16 17909.174905 17909.167835 49: seq: 11, identify_response offset=640 data=b'\xe106\xd6\x9c\xa9\xc6~2\x8a\x11\xb1\xa7\xear-\x83M\xc7\xfeb\xedV6E\x05\x0eZ\x1f\xd4h\xb8\xec\x95:\x1dz\xfe"\xed'
Receive: 17 17909.184050 17909.175990 49: seq: 12, identify_response offset=680 data=b'\x92\xc6\xd9F\xf3\x14\xefy\xb7h\xdd$Z^\xab\n\xc9\x16\xe6Q\xa9mP\x1f^\xad\xb0\x7f&\xef:\xb0\xe7\xaa\x1e\x9c.\xed\x08v'
Receive: 18 17909.192052 17909.185016 49: seq: 13, identify_response offset=720 data=b'\xd9\x90-\xf3\xfb\x8c\x1cY#\x13\x08\x12M\xc6@\x89\x1e\xc4(0\xb6\x04\x8f\x8dj\xe5\x1e\x05\x1a-\x13\x82(\xb2\x90\xcdF\x96\xe9s'
Receive: 19 17909.200049 17909.193002 49: seq: 14, identify_response offset=760 data=b'\x8cp\x01B\xc0\x14CG\xbc\xad\n\xb9\x17P\x0c\xe8\xba\xd73c\x17N\xfa!\x00\xa1\xdc\xc1\x15_\xd7\xe9\xb8Q\x9b\x8dl\xf0\x12\x1a'
Receive: 20 17909.208049 17909.200972 49: seq: 15, identify_response offset=800 data=b'\xfd\x03\x11)\xf2\x87S8\x03\x99\x92V:\x05\x8d\xc19\xd7\n@\x1a\\:f\x1d\x8a\xb4I\xd9b\x8e\x06\x1b\xf0f\x92\x13\xec\xdf\x8c'
Receive: 21 17909.216100 17909.208948 49: seq: 16, identify_response offset=840 data=b'\x88\x06t\xce\xc3\xae\xc6W\x80\x87<\x1a\x18\xc4\x8b5\x9c\x17\x83\x05:@\xc7o\xd6\xf3l\x97\x0c\x9f\xc0\x92\xf9\xe7\x98\x81\xc6\x10\x96\x8a'
Receive: 22 17909.224050 17909.217042 49: seq: 17, identify_response offset=880 data=b'*S\xeb\xe7\x18\xde\xda\xed\xd5Hr)ab*H\x80\xab\xcc65l\xfc\x86}z\x9c\x8bsi@c\xca\x84\xe6-w\x8f\x9f\xc2'
Receive: 23 17909.229359 17909.224991 49: seq: 18, identify_response offset=920 data=b'UU\x06a\x0f\x0e\x17\xd5z\r\xa7\x90S\xb9\x80\x04ol\xe1\x91\xae\xe1\xb49\x1f\x07+]\x9dyMs\xc6\xb1\xed\x82c\xe6 .'
Receive: 24 17909.241379 17909.234098 49: seq: 19, identify_response offset=960 data=b'?\xc9N(=\x1c\xfb\xe1\x05\xc6;\x0c\xf4\x96\x9d\x07\x91h\xe4\x08v\xc3\xee\xffhl\x8576\x83\xbe~\x04i\xcf\x06\x18\xb72\xbd'
Receive: 25 17909.249345 17909.242290 49: seq: 1a, identify_response offset=1000 data=b'\x0f\x82\xf5\xc4\xc9\xb0\x13\xab\x9d\x04u\x05\xfe\xbc{~\x10."\xbb\xc1N\xa0zU-\x8b\x1d\x86=\xb5\xcc-\xc1\x1e\xe4\xbf\x92f\xa1'
Receive: 26 17909.257345 17909.250340 49: seq: 1b, identify_response offset=1040 data=b'M\x03\xc2\xab5\xdf)r"\x1d\x02\xb9\xd7R5\xaf\xba\x9e\xe6^K\xe2&K:\xa4\x93\x87\xf2\x16wF\x15F\xd6QdYv\x02'
Receive: 27 17909.265298 17909.258299 49: seq: 1c, identify_response offset=1080 data=b'\xab#w\xaf\x05V\xbd\xb0\xc4\x88\xe4.\xfa\xe3\x131xY\x03\xdfR\xe6\x80\xd9\x1f\xc0\x03\x98\x1c\xc5tx\x97\xb9\xf9$~F\x85\xdd'
Receive: 28 17909.273302 17909.266319 49: seq: 1d, identify_response offset=1120 data=b'\xf3\x80\x01\x90\x14i\xc2;\xec$] \xf7d\x8f\x88n@\x89\x80\xdb\xb3\x97\x15\x00\xd3\x8c\x99J\xf9dD\x80X\xe5\x9cW5\x0cg'
Receive: 29 17909.281298 17909.274303 49: seq: 1e, identify_response offset=1160 data=b'#&\xb2\xfa\xf8\x83\x0c\x03\xb4\x02\xb7\n\x82=\xa6\xf2ko\xb3\xdeY\xa3)\xd3\x05\xee\x1e\xacN\xdcj\x8bIX\x18\xfeLN\x06P'
Receive: 30 17909.286612 17909.282300 49: seq: 1f, identify_response offset=1200 data=b'&\x83\xdc\x0cXf\x9eEW\xeb\xf6\x11\x12\xed\x90\xb7P\xba\xb2\xc1\xae\xa8\xb4:\x94\x05\xecm\x1a\ry\xd3\xd7\xef1\x01\x93\xe1\x04\xe3'
Receive: 31 17909.298552 17909.291364 49: seq: 10, identify_response offset=1240 data=b'\x9b8=\xeaS\xbd\x02\xd3x\x1a\xa7\x121\xc6\x02\x808\x85\x89\x99s\xbc\xd1\xd2\x13P\x04B\xeb\xe5\x18%\\\xc8\n\x02\x18p\x80\x91'
Receive: 32 17909.306553 17909.299487 49: seq: 11, identify_response offset=1280 data=b'\x9aD\xa0\xa7jBj\x07\xe4\x8c\xb5p\xba\xe1F\x1d\xa2\xcb\x1e\xf0\x000\x89\x85\xa7k\xc3\x04C\xd6Uc\xa2\x1b{/\x8d\x9d\x91\xc8'
Receive: 33 17909.314740 17909.307540 49: seq: 12, identify_response offset=1320 data=b'\xa7Z\xc1\x93\x84\xb1t\xe9v\xda\xb9EH\x04\x06\xc5\xc8\x7f\xc8\x8f\x03\x1f\x98\xbe\xd8\xa4\x05\xeb\xdb\xb3\xcb\x8b\xf8\xfa\xec_\x98\x8a`N'
Receive: 34 17909.322554 17909.316763 49: seq: 13, identify_response offset=1360 data=b'u~\xbb\x8ao\xde\x7f\\!bA\r}s>9\xba9\x1f\xc3\xff\xd1 Xl\x1fi\xf1rxts\x89\x0b\x17\x1f>]\xfc\x14'
Receive: 35 17909.330547 17909.323828 49: seq: 14, identify_response offset=1400 data=b'\xbf\xfb|\xf53\xba\xcb\x90\xfe\x1d\r\xae/n\x81*i\x0b\xb9IF\xe3\xc5\x10\x08o\xbe^\xf3ic\x84\xb6\xcfW\x17W\xef\xffy'
Receive: 36 17909.339799 17909.331727 49: seq: 15, identify_response offset=1440 data=b'\x15\x7f}\xff\xf1\xf2\xd3W|\xb61N\xae\xae>\xc3$K!\x1b\x95\xe4x\xd6\x15\x9cu\x85g\xc1\xea\xfb\xb3\x0f\xf1\xf9\xd9\xed%n'
Receive: 37 17909.347794 17909.340781 49: seq: 16, identify_response offset=1480 data=b'\xc3G\xad\xbe\x9c}Y\xc5\xab\xdb\xeb\xd5\xcf\xb0\xb2\xba\xc2\x95\xd9\x0bf \x1d\xe4D\x94\xb5S5o\x8a\x15\xfc\xa4;\x0c\x81\x06l\x1a'
Receive: 38 17909.355834 17909.348750 49: seq: 17, identify_response offset=1520 data=b'\xc77g\xc3\xc1\xe9\xbf\x87G\x8b\xff\x80\x98\xe7\xf8\xbd\xe0\xef\x0b\xfc\x06\x10\xa0\xc1%\x0e w\xa1\xc1\x15\x0e\xa0\x9e\xa4\xc1;\x1cL\r'
Receive: 39 17909.363791 17909.356789 49: seq: 18, identify_response offset=1560 data=b'\xff\x0f40\x1b\xfc\x88\x83\xc8l\xf0\x0f\x1c\xcc\r\xcfOt\x8c\xe1\xf9@\x03\xe4y\xe9A\x03\xa4\xac\xd4\x88\x18M&\x13\x90\xf8h\x90'
Receive: 40 17909.371792 17909.364708 49: seq: 19, identify_response offset=1600 data=b'\xe8h8\x9dg\x94\x0e\xb4\xb9\x8c\x86\xa3\xf1\x1d\\\xd8p\x99\xeb\xd1\xfb\xe1\xf50&)4\xc1\x06R\xcfXe\xe6\xd1\x05\x19\xc7\x9a\x83'
Receive: 41 17909.379800 17909.372792 49: seq: 1a, identify_response offset=1640 data=b')\x17\x90g9\xda\xf8\xb3\xb0iY\xc6\x80y\x91\x94\xa2\xacZ\x01\xc6.\x100\x04`\x1c\x03\x9b \x9b\x15\x8f[\x05\xdfl{Z\xd4'
Receive: 42 17909.389047 17909.381548 49: seq: 1b, identify_response offset=1680 data=b'\xe0=p\x12#\xb2\xe5\xed\xb4\xa4\xd8\xd6\x8c\xc4\xbaj\x04\x98\xc1\xdf\xedXi\\\xcdh\x9e\xa64\xe7\x13\xc0\xfa\x97\x16\x03\x02\xd4\x1c\x1b'
Receive: 43 17909.397052 17909.390068 49: seq: 1c, identify_response offset=1720 data=b'\x10\x08\x12\xf9\xa4E\xea\xc4\x88\xc9\x15\x16g\x9a\x86X#)\x9a<\xe7\xc3<K\xb1\x83\xb6\x06Ie)l\x11\xe2\xf8\xc1\xe8.\xb8\xe3'
Receive: 44 17909.405043 17909.398016 49: seq: 1d, identify_response offset=1760 data=b'\x83]\x0709!\x9b\xa6j(\xd5\xb4\x0b\x8d\x84\x10\xa6[\xea\xfb\xbcK\xe0\xbe\x99h+AH\x81\xb5098\x83\xfa{\x0e\xb0\xe2'
Receive: 45 17909.413485 17909.406034 49: seq: 1e, identify_response offset=1800 data=b'\xecrE-\x160/\xc1\x1d\x10\xae\n\xec\xbam>\xf8>\x0e\xc7AFhKeZQ\x94\x05\xfb9 CQ\x93B\xb6\xb8-:'
Receive: 46 17909.421053 17909.414768 49: seq: 1f, identify_response offset=1840 data=b'\xae],\xaa\x07i\xa5\x15X/\xa3\xc7\xfbeW]\xbbz\x9a{+{\xeb&\x89t\xe7O\x03\xd1A\xc1\x82\xcd\x12\xcb\x13;\x8be'
Receive: 47 17909.429041 17909.422077 49: seq: 10, identify_response offset=1880 data=b'\xb0\xc5\x95\xf1\xbc7or\x9ft\xabj\xc38\x89\xfa\x04\xf0D]\xed\xef\xa4\xb9q`)z\xd9O\xb0\x0b\x02\xe3u\xf2\x84v\xbc\xb0'
Receive: 48 17909.437044 17909.430007 49: seq: 11, identify_response offset=1920 data=b'\n\xe5R\xfbZj\x9dl\xa4\x80j\x08b\x95}P\xd8\xf2Zi\xb46\r\xe9c\xd6\xe5X\x8d\x013\x86vaP\x93\x1cC>H'
Receive: 49 17909.442305 17909.437986 49: seq: 12, identify_response offset=1960 data=b'|\t\x8c\xea\xaf3l\x93&#g0\xd4Xl_\xa3\xfa)\xdb\x11\xf0\xd5\xac\xf3\xea\x91\xd3\xa5\x8f\xe0\x05\x89\xb0\xa6q!\x08u\xa6'
Receive: 50 17909.454294 17909.447056 49: seq: 13, identify_response offset=2000 data=b";\x0b\xe0\x17\xbc\x80\x19w\xb8\xa0\xca\x9a\x93\n.6h\xa9DI\xfd\xf4\x94\xd0\xd5yG\xddT\x1bPf\x01\xa2'x\xb75De"
Receive: 51 17909.462293 17909.455207 49: seq: 14, identify_response offset=2040 data=b'\x90\x12\x94-\xd1\xb11`\x7f\x96\xe6Rh\xcc\xe8yp\x0c\xaa\x1a\x9e\x01-\x1d\x9b{+G\xb0\xa7\x1d\xf1\xa8\xf2\x1c\x82U\n\xfb\xf5'
Receive: 52 17909.470288 17909.463214 49: seq: 15, identify_response offset=2080 data=b'\xda#\x1c~=\xa7\xd3\xd078\xb0)\xb7\x02/\xe57$\x01\x90B\x15]a\xe7\xacs\x80e\xadl\x0b\x84\x8a1\xd8\x8c\xfc\x9a0'
Receive: 53 17909.478289 17909.471215 49: seq: 16, identify_response offset=2120 data=b'*\xecu\xae\x8c\xa3\xb7U%\xd6\t\xdd\x8eo\x86\xb5\xe7\x97\xd0\xa4Pe@HM\x1f\x0e\xdc_H\x1f\xc8\tqZK\xaa\xa5oK'
Receive: 54 17909.486294 17909.479196 49: seq: 17, identify_response offset=2160 data=b'\xdd\xd5\x18\xab%;=!-\xf6\x81\xbe&m\xba\xcd\xaa\rk\xf1;\xeeCR\xe3\x18\xaa\x94\xae\xbc\x87\x8d\x111\xb8\xa7\x17\xcck\xbf'
Receive: 55 17909.491562 17909.487261 49: seq: 18, identify_response offset=2200 data=b'\x00\x96\xc9>\x02\x90\xa2\x01\t\xd1\x83!\x0b\x80zS\xf3\xfbN|3\x8b\x01\xad*s\xc0\xc0\x07\xd8 \xb9\xcb-\xb4\xb9\xeb/\xa9\xd0'
Receive: 56 17909.499553 17909.495070 49: seq: 19, identify_response offset=2240 data=b'\x14&9\xe1$|\xa7\xb2=\x15\x9f\x00\\\x19\x9a\xd0\xa6q\xee;\xae\xa3\xa8\xd7\xedp\xd6t\xc03nWh\xacO\xb1\xc3\xcb&\x93'
Receive: 57 17909.507544 17909.500460 49: seq: 1a, identify_response offset=2280 data=b'\xc22.M]\xfeD\xd0B\xaa\xcb\x93\x06c\x0b\x16\x18\x072\x13|/\xb6nlK\x198f\xdf\xc1|\x0cB\xd7^\xeb\x06c\x17'
Receive: 58 17909.515543 17909.508479 49: seq: 1b, identify_response offset=2320 data=b'\xa4\x0f\x93\xd1"\x8a(\x14\x9a\xc1\x8cb!\x0ff\x11=>\x0cf\xb39|O^^\xa8~\xa8\x01\x1b$\xb7\xf4M\xab\x1a&\xe1\xbd'
Receive: 59 17909.523538 17909.516596 49: seq: 1c, identify_response offset=2360 data=b'm\x86D\xe9\xbdK\xca\x92\x0ct\xf5@\x9d\xe8\xf4\xbfq+\x8b\x9a\xbe\xc9B(\x8dZ\xe2\x13\x9bj8\xccR5Bo\x99\xca\x9d\x9a'
Receive: 60 17909.531542 17909.524450 49: seq: 1d, identify_response offset=2400 data=b'\xfb\x18-\xfc`\xf5\xeck&S\xe9\xd9<\x90\xeb\x8dp\xbb\xbb\x8e\xbc\x98\xb8\xd6j]\xe1\xdf\\\x05\xbf\x00`a\xb1\x8c\xd0\x94L\x15'
Receive: 61 17909.539543 17909.532461 49: seq: 1e, identify_response offset=2440 data=b"\xdek\xba\xec\\1(F\x96C\xff\xdbC\x8f#\tJlA+\xe6:\xd4p\xa6J\xcc'\xbc\x0b\xd7\x93\x830m\xfa5tAj"
Receive: 62 17909.544807 17909.540451 49: seq: 1f, identify_response offset=2480 data=b'\xeb\xe0\x9c\xb5O\xaa3\x00\x1fC\xb9\x17d\xe0T\xb9\x7fKj\xc3a>b\x7f\xfa1FA\xdbK\xa3\x87\xb5\xad\xb1\xc5\xcc\xb7\xa2z'
Receive: 63 17909.552861 17909.548306 49: seq: 10, identify_response offset=2520 data=b";o+\xa8\x957\xfbg\x84\x9d.`_\xf8\xeeNl\r\xc9'\xe0<f\xb5,\xa7\xbe\x81\x13\x90\xbaN\x0e\xdb\xc3\t\x92\x82\xc6\x03"
Receive: 64 17909.560797 17909.553908 49: seq: 11, identify_response offset=2560 data=b'\x85\x88\xdd,\x8du2\x07\xcf\xb1\xbd\x85?cd\x18v\x0f\xf6"\xfe/#\xeb\xf6\x8d\xec\x181\xd25\x9c\xfa\x8e\xa4\xbb4\xa5\xee\x7f'
Receive: 65 17909.568800 17909.561838 49: seq: 12, identify_response offset=2600 data=b'\x8at\xa0\x11\xd0B\xd8\xf3\\`%\xe8\x11\xdc\xb6\x87\x0e*`1\x0cS\xe1?\xa5\x82e\xc8\x11Tr!\x03\xfa\xe3\xf0P\xfd\xbd\xf7'
Receive: 66 17909.576799 17909.569906 49: seq: 13, identify_response offset=2640 data=b'\xbea\x8f%x\xe8cD\xc9\xb0\xe0\xfd#\xc3\xa0\xba\x16\xc0\x912\xe3\xf9\x82\xd3r\xed\xadYw\x85\xf9\xa3\x7fa\xa3\x1d\xf9\x12v\xa7'
Receive: 67 17909.584801 17909.577768 49: seq: 14, identify_response offset=2680 data=b'\xbe\xe5\x96\x1e\xa4\xf7\x8b\xf9\x0eF~\x0b\xd1\\\x17(\xc0\xb0\xb1/z\xf7\xe5\xc7r\x97U\x1a\x85\x85\xacw\x9f4qU\xf5\xc1&p'
Receive: 68 17909.592792 17909.586090 49: seq: 15, identify_response offset=2720 data=b'\x08\r\x14\x02(\x07\xe7_D\xbap\x11K\x17\xf3\xc3-\x94z\x0f\xc3\x93\xd1\xe8dx\x1c\xcd\x8e7\xebe\x96\xacGc9x\xf9\x1d'
Receive: 69 17909.596805 17909.593764 13: seq: 16, identify_response offset=2760 data=b'v\x93\x04\xa0'
Receive: 70 17909.600807 17909.597699 9: seq: 17, identify_response offset=2764 data=b''
Receive: 71 17909.629392 17909.627626 11: seq: 18, uptime high=0 clock=186811141
Receive: 72 17909.687189 17909.682135 10: seq: 19, clock clock=187683374
Receive: 73 17909.744934 17909.740480 10: seq: 1a, clock clock=188616762
Receive: 74 17909.801421 17909.797198 10: seq: 1b, clock clock=189524025
Receive: 75 17909.855479 17909.853415 10: seq: 1c, clock clock=190422997
Receive: 76 17909.911911 17909.907944 10: seq: 1d, clock clock=191295879
Receive: 77 17909.969948 17909.964479 10: seq: 1e, clock clock=192200887
Receive: 78 17910.026468 17910.022574 10: seq: 1f, clock clock=193129898
Receive: 79 17910.080467 17910.078953 10: seq: 10, clock clock=194031802
Receive: 80 17910.092256 17910.088442 10: seq: 11, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 81 17910.092278 17910.088704 10: seq: 12, clock clock=194187919
Receive: 82 17910.149243 17910.142936 15: seq: 18, config is_config=1 crc=986463129 is_shutdown=0 move_count=584
Receive: 83 17910.219717 17910.213379 8: seq: 11, stepper_position oid=8 pos=0
Receive: 84 17910.227757 17910.226669 8: seq: 12, stepper_position oid=11 pos=0
Receive: 85 17910.235746 17910.233208 8: seq: 13, stepper_position oid=14 pos=0
Receive: 86 17910.239771 17910.237967 8: seq: 14, stepper_position oid=19 pos=0
Receive: 87 17911.075827 17911.073453 11: seq: 16, clock clock=209943064
Receive: 88 17911.137339 17911.073453 14: seq: 16, thermocouple_result oid=18 next_clock=215680000 value=0 fault=0
Receive: 89 17911.182570 17911.073453 14: seq: 16, analog_in_state oid=22 next_clock=216320000 value=2757
Receive: 90 17911.199198 17911.073453 10: seq: 16, buttons_state oid=24 ack_count=0 state=b'\x0f'
Receive: 91 17911.436054 17911.215607 14: seq: 15, thermocouple_result oid=18 next_clock=220480000 value=0 fault=0
Receive: 92 17911.485301 17911.215607 14: seq: 15, analog_in_state oid=22 next_clock=221120000 value=2756
Receive: 93 17911.735602 17911.215607 14: seq: 15, thermocouple_result oid=18 next_clock=225280000 value=0 fault=0
Receive: 94 17911.784437 17911.215607 14: seq: 15, analog_in_state oid=22 next_clock=225920000 value=2752
Receive: 95 17912.033669 17912.016641 14: seq: 13, thermocouple_result oid=18 next_clock=230080000 value=0 fault=0
Receive: 96 17912.082962 17912.073857 12: seq: 11, shutdown clock=226048159 static_string_id=ADC out of range
Transition to shutdown state: MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Dumping gcode input 0 blocks
Dumping 20 requests for client 1967175640
Received 17909.410555: b'{"id": 1720650240, "method": "info", "params": {}}'
Received 17909.665003: b'{"id": 1750083232, "method": "info", "params": {}}'
Received 17909.920252: b'{"id": 1720650000, "method": "info", "params": {}}'
Received 17910.180809: b'{"id": 1740901152, "method": "info", "params": {}}'
Received 17910.436504: b'{"id": 1720649952, "method": "info", "params": {}}'
Received 17910.440056: b'{"id": 1720597232, "method": "list_endpoints", "params": {}}'
Received 17910.444052: b'{"id": 1720404840, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 17910.638392: b'{"id": 1720388600, "method": "objects/list", "params": {}}'
Received 17910.642656: b'{"id": 1749857808, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 17910.647876: b'{"id": 1720650000, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 17910.652782: b'{"id": 1720650000, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 17910.657259: b'{"id": 1720597232, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 17910.667188: b'{"id": 1720404360, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 17910.668029: b'{"id": 1720404696, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 17910.677289: b'{"id": 1720405440, "method": "info", "params": {}}'
Received 17910.678633: b'{"id": 1720405752, "method": "objects/list", "params": {}}'
Received 17910.678633: b'{"id": 1719988312, "method": "gcode/help", "params": {}}'
Received 17910.693498: b'{"id": 1720404792, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "heaters": null, "heater_fan\\u00a0extruder_fan": null, "fan": null, "display_status": null, "pca9533\\u00a0led_strip": null, "motion_report": null, "query_endstops": null, "gcode_move": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 17910.904882: b'{"id": 1750083736, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "heaters": null, "heater_fan\\u00a0extruder_fan": null, "fan": null, "display_status": null, "pca9533\\u00a0led_strip": null, "motion_report": null, "query_endstops": null, "gcode_move": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 17910.907490: b'{"id": 1720405152, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "heaters": null, "heater_fan\\u00a0extruder_fan": null, "fan": null, "display_status": null, "pca9533\\u00a0led_strip": null, "motion_report": null, "query_endstops": null, "gcode_move": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (17911.641442698, 0.0, 0.0)
Stats 17912.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=10835 bytes_read=6420 bytes_retransmit=184 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=308 srtt=0.008 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999069 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.12 cputime=10.043 memavail=570384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17913.3: gcodein=0  mcu: mcu_awake=0.215 mcu_task_avg=0.000422 mcu_task_stddev=0.000546 bytes_write=10841 bytes_read=6509 bytes_retransmit=184 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=308 srtt=0.007 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999266 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=1.12 cputime=10.066 memavail=570392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17914.3: gcodein=0  mcu: mcu_awake=0.215 mcu_task_avg=0.000422 mcu_task_stddev=0.000546 bytes_write=10847 bytes_read=6567 bytes_retransmit=184 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=308 srtt=0.007 rttvar=0.004 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999282 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.12 cputime=10.090 memavail=571204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17915.3: gcodein=0  mcu: mcu_awake=0.215 mcu_task_avg=0.000422 mcu_task_stddev=0.000546 bytes_write=10853 bytes_read=6625 bytes_retransmit=184 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=308 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999280 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.12 cputime=10.115 memavail=570984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17916.3: gcodein=0  mcu: mcu_awake=0.215 mcu_task_avg=0.000422 mcu_task_stddev=0.000546 bytes_write=10859 bytes_read=6697 bytes_retransmit=184 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=308 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999258 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.27 cputime=10.140 memavail=570984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17917.3: gcodein=0  mcu: mcu_awake=0.215 mcu_task_avg=0.000422 mcu_task_stddev=0.000546 bytes_write=10865 bytes_read=6755 bytes_retransmit=184 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=308 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999254 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.27 cputime=10.167 memavail=570984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17918.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=10871 bytes_read=6826 bytes_retransmit=184 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=308 srtt=0.006 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999259 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.27 cputime=10.192 memavail=570804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17919.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=10877 bytes_read=6898 bytes_retransmit=184 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=308 srtt=0.005 rttvar=0.003 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999253 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.27 cputime=10.219 memavail=570804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17920.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=10883 bytes_read=6956 bytes_retransmit=184 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=308 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999252 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.27 cputime=10.244 memavail=570804 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17921.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=10889 bytes_read=7014 bytes_retransmit=184 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=308 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999243 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.49 cputime=10.271 memavail=570844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17922.3: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=10895 bytes_read=7086 bytes_retransmit=184 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=308 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999237 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.49 cputime=10.296 memavail=570844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17923.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10901 bytes_read=7157 bytes_retransmit=184 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=308 srtt=0.005 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999234 heater_bed: target=0 temp=137.2 pwm=0.000 sysload=1.49 cputime=10.323 memavail=570844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17924.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10907 bytes_read=7215 bytes_retransmit=184 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=308 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999232 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.49 cputime=10.349 memavail=571176 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17925.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10913 bytes_read=7287 bytes_retransmit=184 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=308 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999231 heater_bed: target=0 temp=137.1 pwm=0.000 sysload=1.49 cputime=10.376 memavail=571176 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17926.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10919 bytes_read=7345 bytes_retransmit=184 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999230 heater_bed: target=0 temp=137.1 pwm=0.000 sysload=1.45 cputime=10.401 memavail=571176 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17927.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10925 bytes_read=7403 bytes_retransmit=184 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.1 pwm=0.000 sysload=1.45 cputime=10.428 memavail=571216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17928.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10931 bytes_read=7488 bytes_retransmit=184 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.2 pwm=0.000 sysload=1.45 cputime=10.454 memavail=571216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17929.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10937 bytes_read=7546 bytes_retransmit=184 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.2 pwm=0.000 sysload=1.45 cputime=10.480 memavail=571216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17930.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10943 bytes_read=7604 bytes_retransmit=184 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999229 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.45 cputime=10.505 memavail=571300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17931.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10949 bytes_read=7676 bytes_retransmit=184 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.42 cputime=10.533 memavail=571300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17932.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10955 bytes_read=7734 bytes_retransmit=184 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.42 cputime=10.557 memavail=571300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17933.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000063 bytes_write=10961 bytes_read=7792 bytes_retransmit=184 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999229 heater_bed: target=0 temp=137.2 pwm=0.000 sysload=1.42 cputime=10.584 memavail=571136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17934.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10967 bytes_read=7877 bytes_retransmit=184 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999230 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.42 cputime=10.611 memavail=571736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17935.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10973 bytes_read=7935 bytes_retransmit=184 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999229 heater_bed: target=0 temp=137.2 pwm=0.000 sysload=1.42 cputime=10.638 memavail=571736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17936.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10979 bytes_read=7993 bytes_retransmit=184 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.2 pwm=0.000 sysload=1.38 cputime=10.662 memavail=571788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17937.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10985 bytes_read=8065 bytes_retransmit=184 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.1 pwm=0.000 sysload=1.38 cputime=10.690 memavail=571788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17938.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10991 bytes_read=8123 bytes_retransmit=184 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.38 cputime=10.715 memavail=571788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17939.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=10997 bytes_read=8194 bytes_retransmit=184 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999229 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.38 cputime=10.743 memavail=571788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17940.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11003 bytes_read=8266 bytes_retransmit=184 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999230 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.38 cputime=10.770 memavail=571792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17941.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11009 bytes_read=8324 bytes_retransmit=184 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999229 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.35 cputime=10.798 memavail=571792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17942.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11015 bytes_read=8382 bytes_retransmit=184 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999229 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.35 cputime=10.823 memavail=571796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17943.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11021 bytes_read=8454 bytes_retransmit=184 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999228 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.35 cputime=10.851 memavail=571796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17944.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11027 bytes_read=8525 bytes_retransmit=184 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.35 cputime=10.877 memavail=572868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17945.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11033 bytes_read=8583 bytes_retransmit=184 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.35 cputime=10.903 memavail=572660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17946.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11039 bytes_read=8655 bytes_retransmit=184 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.32 cputime=10.929 memavail=572660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17947.3: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11045 bytes_read=8713 bytes_retransmit=184 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999226 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.32 cputime=10.956 memavail=572660 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17948.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11051 bytes_read=8771 bytes_retransmit=184 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.32 cputime=10.981 memavail=572696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17949.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11057 bytes_read=8856 bytes_retransmit=184 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999227 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.32 cputime=11.010 memavail=572696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17950.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11063 bytes_read=8914 bytes_retransmit=184 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999226 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.32 cputime=11.035 memavail=572696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17951.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11069 bytes_read=8972 bytes_retransmit=184 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999226 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.30 cputime=11.062 memavail=572720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17952.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11075 bytes_read=9044 bytes_retransmit=184 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999225 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.30 cputime=11.088 memavail=572720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17953.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11081 bytes_read=9102 bytes_retransmit=184 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999225 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.30 cputime=11.115 memavail=572720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17954.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11087 bytes_read=9173 bytes_retransmit=184 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999224 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.30 cputime=11.141 memavail=572524 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17955.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11093 bytes_read=9245 bytes_retransmit=184 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.30 cputime=11.170 memavail=572784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17956.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11099 bytes_read=9303 bytes_retransmit=184 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999224 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.27 cputime=11.196 memavail=572784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17957.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11111 bytes_read=9361 bytes_retransmit=184 bytes_invalid=0 send_seq=364 receive_seq=363 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999225 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.27 cputime=11.222 memavail=570120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17958.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11117 bytes_read=9449 bytes_retransmit=184 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999224 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.27 cputime=11.243 memavail=570120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17959.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000064 bytes_write=11123 bytes_read=9520 bytes_retransmit=184 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=308 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999224 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.27 cputime=11.270 memavail=570120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17960.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000064 bytes_write=11129 bytes_read=9578 bytes_retransmit=184 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999225 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.27 cputime=11.295 memavail=569960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17961.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000064 bytes_write=11135 bytes_read=9650 bytes_retransmit=184 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999224 heater_bed: target=0 temp=137.3 pwm=0.000 sysload=1.25 cputime=11.322 memavail=569960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17962.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000064 bytes_write=11141 bytes_read=9708 bytes_retransmit=184 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.25 cputime=11.347 memavail=569960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17963.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000061 mcu_task_stddev=0.000064 bytes_write=11147 bytes_read=9766 bytes_retransmit=184 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.25 cputime=11.374 memavail=569764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17964.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11153 bytes_read=9851 bytes_retransmit=184 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=137.4 pwm=0.000 sysload=1.25 cputime=11.401 memavail=569812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17965.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11159 bytes_read=9909 bytes_retransmit=184 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.25 cputime=11.427 memavail=570056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17966.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11165 bytes_read=9967 bytes_retransmit=184 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.31 cputime=11.452 memavail=569884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17967.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11171 bytes_read=10039 bytes_retransmit=184 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=137.5 pwm=0.000 sysload=1.31 cputime=11.480 memavail=569884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17968.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11177 bytes_read=10097 bytes_retransmit=184 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.31 cputime=11.505 memavail=569884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17969.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11183 bytes_read=10168 bytes_retransmit=184 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.31 cputime=11.533 memavail=570140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17970.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11189 bytes_read=10240 bytes_retransmit=184 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.31 cputime=11.558 memavail=570140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17971.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11195 bytes_read=10298 bytes_retransmit=184 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.21 cputime=11.585 memavail=570140 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17972.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11201 bytes_read=10356 bytes_retransmit=184 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.21 cputime=11.612 memavail=570400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17973.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11207 bytes_read=10428 bytes_retransmit=184 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.21 cputime=11.639 memavail=570400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17974.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11213 bytes_read=10499 bytes_retransmit=184 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.21 cputime=11.662 memavail=571196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17975.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11219 bytes_read=10557 bytes_retransmit=184 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.21 cputime=11.685 memavail=570988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17976.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11225 bytes_read=10629 bytes_retransmit=184 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.11 cputime=11.710 memavail=570988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17977.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11231 bytes_read=10687 bytes_retransmit=184 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.11 cputime=11.736 memavail=570988 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17978.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000064 bytes_write=11237 bytes_read=10745 bytes_retransmit=184 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.11 cputime=11.760 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17979.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000062 bytes_write=11243 bytes_read=10830 bytes_retransmit=184 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.11 cputime=11.788 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17980.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000062 bytes_write=11249 bytes_read=10888 bytes_retransmit=184 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.11 cputime=11.813 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17981.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000062 bytes_write=11255 bytes_read=10946 bytes_retransmit=184 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=11.839 memavail=570492 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17982.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000062 bytes_write=11261 bytes_read=11018 bytes_retransmit=184 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=11.864 memavail=570560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17983.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000062 bytes_write=11267 bytes_read=11076 bytes_retransmit=184 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.9 pwm=0.000 sysload=1.02 cputime=11.890 memavail=570560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17984.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11273 bytes_read=11147 bytes_retransmit=184 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=11.912 memavail=570056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17985.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11279 bytes_read=11219 bytes_retransmit=184 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=11.935 memavail=570056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17986.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11285 bytes_read=11277 bytes_retransmit=184 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=11.961 memavail=570056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17987.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11291 bytes_read=11335 bytes_retransmit=184 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=11.988 memavail=569812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17988.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11297 bytes_read=11407 bytes_retransmit=184 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=12.013 memavail=569812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17989.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11303 bytes_read=11478 bytes_retransmit=184 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.02 cputime=12.040 memavail=569812 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17990.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11309 bytes_read=11536 bytes_retransmit=184 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=12.064 memavail=569824 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17991.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11315 bytes_read=11608 bytes_retransmit=184 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.7 pwm=0.000 sysload=1.02 cputime=12.092 memavail=569888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17992.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11321 bytes_read=11666 bytes_retransmit=184 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=308 srtt=0.003 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=12.117 memavail=569888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17993.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11327 bytes_read=11724 bytes_retransmit=184 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=137.8 pwm=0.000 sysload=1.02 cputime=12.146 memavail=569892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17994.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11333 bytes_read=11809 bytes_retransmit=184 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=308 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.02 cputime=12.173 memavail=569688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17995.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11339 bytes_read=11867 bytes_retransmit=184 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=308 srtt=0.004 rttvar=0.002 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=137.9 pwm=0.000 sysload=1.02 cputime=12.200 memavail=569688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17996.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11345 bytes_read=11939 bytes_retransmit=184 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.02 cputime=12.226 memavail=569468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17997.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11351 bytes_read=11997 bytes_retransmit=184 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.02 cputime=12.253 memavail=569468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17998.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11357 bytes_read=12055 bytes_retransmit=184 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.02 cputime=12.279 memavail=569468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 17999.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11363 bytes_read=12140 bytes_retransmit=184 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999223 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.02 cputime=12.308 memavail=569476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18000.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11369 bytes_read=12198 bytes_retransmit=184 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.02 cputime=12.333 memavail=569476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18001.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11375 bytes_read=12256 bytes_retransmit=184 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.360 memavail=569476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18002.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11381 bytes_read=12328 bytes_retransmit=184 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.01 cputime=12.388 memavail=569236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18003.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11387 bytes_read=12386 bytes_retransmit=184 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.01 cputime=12.414 memavail=569236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18004.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11393 bytes_read=12444 bytes_retransmit=184 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.01 cputime=12.438 memavail=568992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18005.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11399 bytes_read=12529 bytes_retransmit=184 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.01 cputime=12.467 memavail=568756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18006.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11405 bytes_read=12587 bytes_retransmit=184 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=137.6 pwm=0.000 sysload=1.01 cputime=12.491 memavail=568756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18007.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11411 bytes_read=12645 bytes_retransmit=184 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=1.01 cputime=12.518 memavail=568968 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18008.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11417 bytes_read=12717 bytes_retransmit=184 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=1.01 cputime=12.544 memavail=569032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18009.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11423 bytes_read=12775 bytes_retransmit=184 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.571 memavail=569032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18010.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000065 bytes_write=11429 bytes_read=12846 bytes_retransmit=184 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.595 memavail=569032 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18011.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000065 bytes_write=11435 bytes_read=12918 bytes_retransmit=184 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=308 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.624 memavail=569036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18012.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000065 bytes_write=11441 bytes_read=12976 bytes_retransmit=184 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999222 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.650 memavail=569036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18013.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000065 bytes_write=11447 bytes_read=13034 bytes_retransmit=184 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.677 memavail=569040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18014.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000065 bytes_write=11453 bytes_read=13106 bytes_retransmit=184 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.01 cputime=12.702 memavail=569580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18015.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11459 bytes_read=13177 bytes_retransmit=184 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.0 pwm=0.000 sysload=1.01 cputime=12.730 memavail=569580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18016.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11465 bytes_read=13235 bytes_retransmit=184 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.754 memavail=569580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18017.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11471 bytes_read=13307 bytes_retransmit=184 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.782 memavail=569884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18018.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11477 bytes_read=13365 bytes_retransmit=184 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.806 memavail=569884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18019.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11489 bytes_read=13439 bytes_retransmit=184 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.834 memavail=569644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18020.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11495 bytes_read=13524 bytes_retransmit=184 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.856 memavail=570436 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18021.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11501 bytes_read=13582 bytes_retransmit=184 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.879 memavail=570436 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18022.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11507 bytes_read=13640 bytes_retransmit=184 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.904 memavail=570436 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18023.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11513 bytes_read=13712 bytes_retransmit=184 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.931 memavail=570216 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18024.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000063 mcu_task_stddev=0.000062 bytes_write=11519 bytes_read=13770 bytes_retransmit=184 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=12.953 memavail=571016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18025.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11525 bytes_read=13841 bytes_retransmit=184 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=12.979 memavail=571016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18026.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11531 bytes_read=13913 bytes_retransmit=184 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=13.005 memavail=571036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18027.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11537 bytes_read=13971 bytes_retransmit=184 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999221 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=13.031 memavail=571036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18028.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11543 bytes_read=14029 bytes_retransmit=184 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=13.056 memavail=571040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18029.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000061 bytes_write=11549 bytes_read=14101 bytes_retransmit=184 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.084 memavail=571040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18030.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11555 bytes_read=14172 bytes_retransmit=184 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=13.110 memavail=571040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18031.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11561 bytes_read=14230 bytes_retransmit=184 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999220 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.133 memavail=571092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18032.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11567 bytes_read=14302 bytes_retransmit=184 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=138.1 pwm=0.000 sysload=1.01 cputime=13.158 memavail=571124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18033.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11573 bytes_read=14360 bytes_retransmit=184 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.185 memavail=571124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18034.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000061 mcu_task_stddev=0.000061 bytes_write=11579 bytes_read=14418 bytes_retransmit=184 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999219 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.207 memavail=570648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18035.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11585 bytes_read=14503 bytes_retransmit=184 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.233 memavail=570652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18036.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11591 bytes_read=14561 bytes_retransmit=184 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.257 memavail=570652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18037.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11597 bytes_read=14619 bytes_retransmit=184 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.284 memavail=570652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18038.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11603 bytes_read=14691 bytes_retransmit=184 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.311 memavail=570404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18039.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11609 bytes_read=14749 bytes_retransmit=184 bytes_invalid=0 send_seq=447 receive_seq=447 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.2 pwm=0.000 sysload=1.01 cputime=13.338 memavail=570408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18040.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11615 bytes_read=14820 bytes_retransmit=184 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=1.01 cputime=13.364 memavail=570408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18041.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11621 bytes_read=14892 bytes_retransmit=184 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=0.93 cputime=13.393 memavail=570416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18042.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11627 bytes_read=14950 bytes_retransmit=184 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=0.93 cputime=13.417 memavail=570416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18043.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11633 bytes_read=15008 bytes_retransmit=184 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=0.93 cputime=13.444 memavail=570416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18044.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11639 bytes_read=15080 bytes_retransmit=184 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.93 cputime=13.470 memavail=570416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18045.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11645 bytes_read=15151 bytes_retransmit=184 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.93 cputime=13.498 memavail=570416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18046.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11651 bytes_read=15209 bytes_retransmit=184 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.85 cputime=13.522 memavail=570416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18047.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11657 bytes_read=15281 bytes_retransmit=184 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.85 cputime=13.550 memavail=570200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18048.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11663 bytes_read=15339 bytes_retransmit=184 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.85 cputime=13.575 memavail=570200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18049.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11669 bytes_read=15397 bytes_retransmit=184 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.85 cputime=13.602 memavail=570200 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18050.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000064 bytes_write=11675 bytes_read=15482 bytes_retransmit=184 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.3 pwm=0.000 sysload=0.85 cputime=13.629 memavail=569964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18051.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000064 bytes_write=11681 bytes_read=15540 bytes_retransmit=184 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.78 cputime=13.656 memavail=569964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18052.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000064 bytes_write=11687 bytes_read=15598 bytes_retransmit=184 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.78 cputime=13.681 memavail=569964 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18053.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000064 bytes_write=11693 bytes_read=15670 bytes_retransmit=184 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999217 heater_bed: target=0 temp=138.5 pwm=0.000 sysload=0.78 cputime=13.709 memavail=569972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18054.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000064 mcu_task_stddev=0.000064 bytes_write=11699 bytes_read=15728 bytes_retransmit=184 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999216 heater_bed: target=0 temp=138.5 pwm=0.000 sysload=0.78 cputime=13.733 memavail=569972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18055.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11705 bytes_read=15799 bytes_retransmit=184 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999216 heater_bed: target=0 temp=138.4 pwm=0.000 sysload=0.78 cputime=13.760 memavail=569972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18056.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11711 bytes_read=15871 bytes_retransmit=184 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999216 heater_bed: target=0 temp=138.8 pwm=0.000 sysload=0.80 cputime=13.786 memavail=569972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
b'Got EOF when reading from device'
Stats 18057.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=0 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=13.813 memavail=569980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18058.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=1 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=13.832 memavail=569980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18059.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=2 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=13.855 memavail=569980 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18060.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=3 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=13.877 memavail=570472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18061.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=4 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=13.900 memavail=570508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Timeout with MCU 'mcu' (eventtime=18062.444103)
Stats 18062.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=5 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=13.922 memavail=570036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18063.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=6 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=13.946 memavail=570036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18064.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=7 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=13.967 memavail=570548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18065.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=8 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=13.991 memavail=570324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18066.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=9 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=14.012 memavail=570324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18067.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=10 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=14.034 memavail=570324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18068.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=11 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=14.056 memavail=570620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18069.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=12 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=14.079 memavail=570620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18070.4: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=13 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=14.100 memavail=570620 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18071.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=14 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=14.123 memavail=570432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18072.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=15 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=14.144 memavail=570432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18073.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=16 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=14.167 memavail=570432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18074.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=17 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=14.186 memavail=570748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18075.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=18 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=14.208 memavail=570748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18076.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=19 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=14.229 memavail=570748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18077.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=20 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=14.253 memavail=570560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18078.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=21 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=14.274 memavail=570560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18079.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=22 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=14.297 memavail=570560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18080.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=24 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=14.319 memavail=570180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18081.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=25 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=14.342 memavail=570180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18082.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=26 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=14.362 memavail=571192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18083.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=27 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=14.381 memavail=570976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18084.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=28 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=14.402 memavail=571520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18085.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=29 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=14.426 memavail=570580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18086.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=30 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=14.447 memavail=570392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18087.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=31 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=14.470 memavail=570392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18088.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=32 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=14.489 memavail=570392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18089.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=33 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=14.512 memavail=570644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18090.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=34 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=14.533 memavail=570644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18091.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=35 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=14.555 memavail=570644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18092.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=36 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=14.576 memavail=570656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18093.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=37 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=14.599 memavail=570656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18094.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=38 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=14.619 memavail=570432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18095.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=39 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=14.639 memavail=570204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18096.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=40 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=14.660 memavail=570204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18097.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=41 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=14.682 memavail=570204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18098.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=42 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=14.703 memavail=570224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18099.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=43 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=14.729 memavail=570224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18100.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=44 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=14.750 memavail=570224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18101.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=45 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=14.774 memavail=569724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18102.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=46 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=14.795 memavail=569724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18103.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=47 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=14.819 memavail=569724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18104.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=48 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=14.841 memavail=570716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18105.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=49 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=14.864 memavail=570716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18106.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=50 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=14.884 memavail=570800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18107.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=51 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=14.907 memavail=570816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18108.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=52 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=14.928 memavail=570816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18109.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=53 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=14.951 memavail=570580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18110.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=54 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=14.974 memavail=570584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18111.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=55 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=14.997 memavail=570584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18112.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=56 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=15.018 memavail=570584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18113.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=57 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=15.042 memavail=570584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18114.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=58 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=15.062 memavail=571380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18115.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=59 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=15.083 memavail=571380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18116.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=60 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=15.105 memavail=571392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18117.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=61 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=15.128 memavail=571392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18118.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=62 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=15.148 memavail=571392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18119.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=63 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=15.173 memavail=571400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18120.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=64 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=15.194 memavail=571400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18121.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=65 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=15.217 memavail=571400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18122.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=66 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=15.239 memavail=571160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18123.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=67 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=15.262 memavail=571160 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18124.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=68 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=15.282 memavail=570908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18125.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=69 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=15.303 memavail=570916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18126.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=70 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=15.324 memavail=570916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18127.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=71 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=15.347 memavail=570916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18128.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=72 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=15.368 memavail=570680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18129.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=73 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=15.391 memavail=570680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18130.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=74 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=15.412 memavail=570680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18131.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=75 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=15.435 memavail=570680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18132.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=76 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=15.456 memavail=570680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18133.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=77 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=15.478 memavail=570680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18134.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=78 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=15.499 memavail=570976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18135.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=79 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=15.522 memavail=570976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18136.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=80 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=15.544 memavail=570984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18137.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=81 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=15.567 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18138.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=82 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=15.588 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18139.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=83 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=15.611 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18140.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=84 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=15.631 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18141.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=85 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=15.654 memavail=570756 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18142.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=87 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=15.675 memavail=570972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18143.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=88 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=15.697 memavail=570780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18144.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=89 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=15.718 memavail=570276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18145.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=90 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=15.738 memavail=569792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18146.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=91 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=15.755 memavail=569792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18147.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=92 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=15.778 memavail=569792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18148.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=93 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=15.798 memavail=569792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18149.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=94 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=15.821 memavail=569548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18150.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=95 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=15.842 memavail=569548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18151.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=96 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=15.866 memavail=569548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18152.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=97 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=15.886 memavail=569012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18153.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=98 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=15.908 memavail=568816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18154.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=99 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=15.930 memavail=568832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18155.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=100 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=15.954 memavail=569136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18156.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=101 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=15.974 memavail=569136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18157.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=102 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=15.997 memavail=569136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18158.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=103 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.019 memavail=569136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18159.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=104 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.041 memavail=569136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18160.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=105 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.063 memavail=569136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18161.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=106 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.086 memavail=569396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18162.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=107 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.108 memavail=569396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18163.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=108 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.130 memavail=569396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18164.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=109 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.149 memavail=568936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18165.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=110 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.169 memavail=568936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18166.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=111 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.192 memavail=568936 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18167.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=112 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.213 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18168.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=113 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.235 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18169.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=114 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.257 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18170.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=115 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.279 memavail=568996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18171.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=116 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.300 memavail=568996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18172.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=117 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.323 memavail=568996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18173.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=118 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.344 memavail=569004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18174.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=119 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.364 memavail=568820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18175.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=120 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.01 cputime=16.383 memavail=568820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18176.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=121 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.00 cputime=16.406 memavail=568820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18177.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=122 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.00 cputime=16.427 memavail=568820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18178.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=123 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.00 cputime=16.449 memavail=568820 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18179.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=124 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.00 cputime=16.470 memavail=568788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18180.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=125 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=1.00 cputime=16.493 memavail=568836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18181.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=126 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.514 memavail=568836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18182.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=127 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.537 memavail=568856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18183.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=128 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.558 memavail=568856 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18184.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=129 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.580 memavail=569144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18185.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=130 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=16.601 memavail=568908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18186.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=131 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=16.624 memavail=568908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18187.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=132 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=16.645 memavail=568908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18188.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=133 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=16.669 memavail=568656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18189.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=134 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=16.690 memavail=568656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18190.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=135 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=16.712 memavail=568656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18191.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=136 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=16.733 memavail=568676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18192.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=137 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=16.756 memavail=568676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18193.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=138 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=16.776 memavail=568676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18194.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=139 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=16.798 memavail=569712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18195.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=140 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=16.819 memavail=569712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18196.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=141 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=16.841 memavail=569712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18197.5: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=142 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=16.862 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18198.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=143 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=16.885 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18199.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=144 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=16.905 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18200.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=145 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=16.927 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18201.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=146 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=16.948 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18202.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=147 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=16.970 memavail=568984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18203.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=149 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=16.991 memavail=568996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18204.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=150 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=17.012 memavail=569536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18205.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=151 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=17.030 memavail=569048 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18206.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=152 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=17.053 memavail=569088 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18207.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=153 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=17.076 memavail=567576 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18208.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=154 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=17.094 memavail=567832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18209.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=155 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=17.115 memavail=567580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18210.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=156 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=17.138 memavail=567580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18211.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=157 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=17.158 memavail=567580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18212.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=158 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=17.181 memavail=567848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18213.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=159 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=17.201 memavail=567848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18214.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=160 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=17.222 memavail=568384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18215.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=161 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=17.241 memavail=568424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18216.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=162 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=17.265 memavail=568424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18217.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=163 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=17.286 memavail=568424 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18218.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=164 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=17.309 memavail=568188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18219.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=165 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=17.330 memavail=568188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18220.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=166 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=17.353 memavail=568188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18221.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=167 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.374 memavail=568440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18222.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=168 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.396 memavail=568440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18223.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=169 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.417 memavail=568440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18224.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=170 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.443 memavail=568220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18225.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=171 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.463 memavail=568220 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18226.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=172 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.487 memavail=567968 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18227.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=173 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.508 memavail=568000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18228.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=174 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.531 memavail=568000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18229.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=175 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.552 memavail=568000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18230.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=176 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.92 cputime=17.574 memavail=568000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18231.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=177 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=17.595 memavail=567760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18232.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=178 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=17.618 memavail=567760 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18233.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=179 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=17.639 memavail=567764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18234.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=180 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=17.662 memavail=568016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18235.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=181 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=17.683 memavail=568060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18236.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=182 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.706 memavail=568060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18237.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=183 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.726 memavail=568060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18238.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=184 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.748 memavail=568060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18239.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=185 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.770 memavail=568028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18240.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=186 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.792 memavail=568076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18241.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=187 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.813 memavail=568076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18242.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=188 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.838 memavail=568096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18243.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=189 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.858 memavail=568096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18244.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=190 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.881 memavail=567844 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18245.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=191 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=17.902 memavail=567596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18246.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=192 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=17.925 memavail=567596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18247.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=193 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=17.945 memavail=567596 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18248.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=194 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=17.968 memavail=567364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18249.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=195 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=17.988 memavail=567364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18250.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=196 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=18.011 memavail=567364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18251.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=197 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=18.032 memavail=567364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18252.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=198 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=18.054 memavail=567368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18253.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=199 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=18.075 memavail=567368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18254.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=200 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=18.096 memavail=567680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18255.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=201 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=18.115 memavail=567680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18256.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=202 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=18.137 memavail=567680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18257.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=203 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=18.157 memavail=567204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18258.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=204 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=18.180 memavail=567204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18259.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=205 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=18.200 memavail=567204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18260.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=206 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=18.223 memavail=566976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18261.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=207 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=18.241 memavail=566976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18262.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=208 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=18.264 memavail=566976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18263.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=209 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=18.285 memavail=567236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18264.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=211 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=18.306 memavail=567560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18265.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=212 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=18.324 memavail=567568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18266.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=213 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=18.347 memavail=567356 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18267.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=214 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=18.368 memavail=567356 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18268.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=215 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=18.391 memavail=567624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18269.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=216 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=18.411 memavail=567380 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18270.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=217 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=18.430 memavail=569172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18271.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=218 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=18.448 memavail=569172 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18272.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=219 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=18.470 memavail=568684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18273.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=220 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=18.490 memavail=568684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18274.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=221 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=18.513 memavail=568712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18275.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=222 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=18.533 memavail=568800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18276.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=223 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=18.556 memavail=568800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18277.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=224 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=18.577 memavail=568800 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18278.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=225 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=18.600 memavail=568808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18279.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=226 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=18.621 memavail=568808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18280.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=227 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=18.643 memavail=568808 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18281.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=228 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=18.664 memavail=568828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18282.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=229 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=18.686 memavail=568828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18283.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=230 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=18.707 memavail=568828 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18284.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=231 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=18.729 memavail=569360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18285.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=232 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=18.750 memavail=569360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18286.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=233 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=18.772 memavail=569360 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18287.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=234 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=18.790 memavail=569396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18288.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=235 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=18.814 memavail=569396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18289.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=236 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=18.835 memavail=569396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18290.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=237 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=18.858 memavail=569408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18291.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=238 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=18.878 memavail=569408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18292.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=239 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=18.900 memavail=569408 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18293.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=240 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=18.923 memavail=569664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18294.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=241 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=18.945 memavail=568684 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18295.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=242 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=18.966 memavail=568688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18296.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=243 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=18.989 memavail=568700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18297.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=244 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=19.009 memavail=568700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18298.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=245 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=19.033 memavail=568700 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18299.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=246 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=19.054 memavail=568716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18300.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=247 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=19.078 memavail=568476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18301.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=248 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=19.098 memavail=568476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18302.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=249 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=19.121 memavail=568476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18303.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=250 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=19.142 memavail=568476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18304.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=251 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=19.163 memavail=568272 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18305.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=252 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=19.181 memavail=568044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18306.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=253 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=19.203 memavail=567544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18307.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=254 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=19.224 memavail=567744 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18308.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=255 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=19.247 memavail=568076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18309.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=256 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=19.268 memavail=568076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18310.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=257 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=19.291 memavail=568076 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18311.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=258 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=19.312 memavail=567840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18312.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=259 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=19.335 memavail=567840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18313.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=260 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=19.356 memavail=567840 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18314.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=261 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=19.379 memavail=567908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18315.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=262 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=19.402 memavail=567908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18316.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=263 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=19.424 memavail=567908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18317.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=264 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=19.445 memavail=567908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18318.6: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=265 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=19.468 memavail=567908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18319.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=266 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=19.489 memavail=567868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18320.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=267 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=19.512 memavail=567428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18321.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=268 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=19.532 memavail=567428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18322.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=269 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=19.554 memavail=567428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18323.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=270 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=19.576 memavail=567192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18324.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=271 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=19.599 memavail=567976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18325.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=273 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=19.621 memavail=567972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18326.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=274 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=19.644 memavail=567764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18327.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=275 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=19.665 memavail=567764 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18328.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=276 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=19.688 memavail=567272 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18329.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=277 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=19.708 memavail=567476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18330.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=278 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=19.732 memavail=567780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18331.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=279 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=19.753 memavail=567780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18332.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=280 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=19.775 memavail=567292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18333.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=281 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=19.792 memavail=567296 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18334.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=282 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=19.814 memavail=568096 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18335.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=283 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=19.835 memavail=567832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18336.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=284 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.858 memavail=567864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18337.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=285 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.879 memavail=567864 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18338.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=286 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.901 memavail=567624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18339.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=287 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.922 memavail=567624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18340.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=288 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.945 memavail=567624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18341.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=289 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.965 memavail=567372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18342.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=290 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=19.989 memavail=567372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18343.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=291 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.009 memavail=567372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18344.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=292 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.031 memavail=567364 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18345.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=293 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.050 memavail=567412 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18346.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=294 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.072 memavail=567412 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18347.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=295 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.094 memavail=567416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18348.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=296 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.116 memavail=567416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18349.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=297 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.137 memavail=567416 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18350.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=298 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.159 memavail=567180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18351.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=299 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.181 memavail=567180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18352.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=300 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.204 memavail=567180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18353.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=301 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.224 memavail=567180 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18354.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=302 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.246 memavail=566928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18355.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=303 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.264 memavail=566928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18356.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=304 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.287 memavail=566688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18357.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=305 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.308 memavail=566696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18358.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=306 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.331 memavail=566696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18359.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=307 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.352 memavail=566696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18360.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=308 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.375 memavail=566448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18361.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=309 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.396 memavail=566448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18362.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=310 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.418 memavail=566708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18363.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=311 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.439 memavail=566708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18364.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=312 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.462 memavail=566688 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18365.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=313 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.483 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18366.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=314 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.98 cputime=20.506 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18367.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=315 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.526 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18368.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=316 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.549 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18369.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=317 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.570 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18370.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=318 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.592 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18371.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=319 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.613 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18372.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=320 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.635 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18373.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=321 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.656 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18374.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=322 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.678 memavail=567784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18375.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=323 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.700 memavail=567784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18376.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=324 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.722 memavail=567784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18377.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=325 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.743 memavail=567796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18378.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=326 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.763 memavail=567796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18379.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=327 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.783 memavail=567796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18380.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=328 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.805 memavail=567848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18381.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=329 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.99 cputime=20.825 memavail=567848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18382.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=330 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=20.848 memavail=567848 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18383.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=331 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=20.869 memavail=567600 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18384.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=332 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=20.891 memavail=568640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18385.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=333 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=20.912 memavail=568648 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18386.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=335 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=20.935 memavail=568428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18387.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=336 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=20.955 memavail=568428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18388.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=337 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=20.978 memavail=568428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18389.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=338 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.000 memavail=568244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18390.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=339 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.023 memavail=568244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18391.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=340 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.044 memavail=568244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18392.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=341 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=21.067 memavail=568248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18393.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=342 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=21.090 memavail=568504 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18394.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=343 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=21.112 memavail=568516 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18395.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=344 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=21.130 memavail=566580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18396.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=345 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=21.151 memavail=566580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18397.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=346 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=21.172 memavail=566580 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18398.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=347 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=21.195 memavail=566592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18399.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=348 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=21.217 memavail=566624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18400.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=349 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=21.240 memavail=566624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18401.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=350 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=21.263 memavail=566384 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18402.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=351 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=21.287 memavail=566388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18403.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=352 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=21.309 memavail=566388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18404.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=353 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=21.333 memavail=567244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18405.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=354 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=21.355 memavail=567260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18406.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=355 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=21.379 memavail=567260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18407.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=356 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=21.401 memavail=567068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18408.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=357 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=21.425 memavail=567068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18409.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=358 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=21.446 memavail=567068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18410.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=359 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=21.470 memavail=567132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18411.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=360 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=21.492 memavail=567132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18412.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=361 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.515 memavail=567132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18413.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=362 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.537 memavail=567192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18414.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=363 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.560 memavail=566444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18415.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=364 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.581 memavail=566452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18416.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=365 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=21.603 memavail=566452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18417.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=366 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=21.625 memavail=566452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18418.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=367 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=21.648 memavail=566452 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18419.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=368 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=21.670 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18420.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=369 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=21.694 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18421.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=370 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=21.715 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18422.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=371 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=21.740 memavail=566664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18423.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=372 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=21.761 memavail=566712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18424.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=373 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=21.784 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18425.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=374 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=21.805 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18426.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=375 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.86 cputime=21.828 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18427.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=376 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=21.849 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18428.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=377 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=21.873 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18429.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=378 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=21.894 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18430.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=379 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=21.918 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18431.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=380 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=21.939 memavail=566476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18432.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=381 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=21.962 memavail=566476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18433.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=382 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=21.984 memavail=566476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18434.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=383 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=22.005 memavail=566476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18435.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=384 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=22.024 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18436.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=385 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=22.047 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18437.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=386 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=22.068 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18438.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=387 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=22.091 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18439.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=388 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=22.114 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18440.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=389 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=22.137 memavail=566480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18441.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=390 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=22.159 memavail=566480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18442.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=391 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=22.182 memavail=566480 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18443.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=392 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=22.203 memavail=566496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18444.7: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=393 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=22.225 memavail=566244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18445.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=394 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=22.242 memavail=566244 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18446.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=395 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=22.264 memavail=566248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18447.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=396 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=22.284 memavail=566248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18448.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=398 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=22.308 memavail=566248 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18449.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=399 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=22.328 memavail=566300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18450.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=400 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=22.352 memavail=566300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18451.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=401 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.91 cputime=22.372 memavail=566300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18452.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=402 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=22.395 memavail=566308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18453.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=403 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=22.416 memavail=566308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18454.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=404 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=22.438 memavail=566068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18455.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=405 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=22.458 memavail=565816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18456.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=406 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=22.480 memavail=565816 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18457.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=407 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.501 memavail=565276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18458.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=408 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.519 memavail=566388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18459.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=409 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.538 memavail=566388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18460.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=410 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.560 memavail=566388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18461.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=411 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.581 memavail=566132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18462.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=412 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=22.603 memavail=566196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18463.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=413 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=22.624 memavail=566196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18464.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=414 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=22.647 memavail=565720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18465.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=415 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=22.667 memavail=565728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18466.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=416 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.71 cputime=22.690 memavail=565728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18467.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=417 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=22.710 memavail=565488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18468.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=418 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=22.732 memavail=565488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18469.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=419 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=22.750 memavail=565488 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18470.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=420 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=22.772 memavail=565492 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18471.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=421 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.73 cputime=22.792 memavail=565496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18472.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=422 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=22.814 memavail=565496 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18473.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=423 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=22.835 memavail=565704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18474.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=424 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=22.858 memavail=566556 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18475.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=425 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=22.879 memavail=566556 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18476.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=426 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.75 cputime=22.901 memavail=566508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18477.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=427 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.921 memavail=566568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18478.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=428 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.943 memavail=566568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18479.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=429 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.965 memavail=566568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18480.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=430 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=22.989 memavail=566832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18481.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=431 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.77 cputime=23.010 memavail=566832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18482.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=432 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=23.033 memavail=566644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18483.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=433 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=23.054 memavail=566644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18484.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=434 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=23.077 memavail=567428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18485.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=435 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=23.094 memavail=567188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18486.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=436 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.79 cputime=23.117 memavail=567188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18487.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=437 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=23.138 memavail=567188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18488.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=438 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=23.162 memavail=567192 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18489.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=439 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=23.183 memavail=567196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18490.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=440 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=23.206 memavail=567196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18491.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=441 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=23.227 memavail=567196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18492.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=442 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=23.250 memavail=567196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18493.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=443 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=23.271 memavail=567196 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18494.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=444 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=23.295 memavail=567280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18495.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=445 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=23.313 memavail=567288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18496.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=446 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=23.336 memavail=567288 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18497.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=447 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=23.357 memavail=567552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18498.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=448 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=23.380 memavail=567552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18499.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=449 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=23.400 memavail=567552 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18500.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=450 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=23.424 memavail=567320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18501.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=451 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=23.445 memavail=567320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18502.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=452 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=23.467 memavail=567320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18503.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=453 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=23.489 memavail=567320 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18504.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=454 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=23.512 memavail=567876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18505.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=455 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=23.533 memavail=567876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18506.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=456 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.93 cputime=23.555 memavail=567876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18507.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=457 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.576 memavail=567876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18508.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=458 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.598 memavail=567876 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18509.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=460 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.620 memavail=567644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18510.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=461 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.642 memavail=567644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18511.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=462 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.659 memavail=567644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18512.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=463 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.683 memavail=567644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18513.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=464 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.704 memavail=567644 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18514.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=465 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.727 memavail=568228 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18515.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=466 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.748 memavail=568260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18516.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=467 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.94 cputime=23.771 memavail=568260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18517.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=468 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.95 cputime=23.791 memavail=568260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18518.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=469 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.95 cputime=23.813 memavail=567268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18519.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=470 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.95 cputime=23.833 memavail=567268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18520.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=471 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.95 cputime=23.854 memavail=567268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18521.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=472 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.95 cputime=23.871 memavail=566884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18522.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=473 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=23.894 memavail=566884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18523.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=474 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=23.914 memavail=566884 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18524.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=475 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=23.937 memavail=566444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18525.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=476 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=23.955 memavail=566448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18526.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=477 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=23.977 memavail=566152 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18527.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=478 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=23.998 memavail=566020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18528.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=479 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.021 memavail=566020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18529.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=480 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.042 memavail=566020 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18530.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=481 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.067 memavail=565780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18531.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=482 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.088 memavail=565784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18532.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=483 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=24.111 memavail=565784 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18533.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=484 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=24.132 memavail=565788 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18534.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=485 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=24.156 memavail=566044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18535.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=486 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=24.173 memavail=565792 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18536.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=487 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.74 cputime=24.194 memavail=566108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18537.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=488 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=24.216 memavail=566108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18538.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=489 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=24.239 memavail=566108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18539.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=490 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=24.260 memavail=566108 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18540.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=491 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=24.283 memavail=566120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18541.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=492 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=24.304 memavail=566120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18542.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=493 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=24.327 memavail=566324 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18543.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=494 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=24.348 memavail=566372 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18544.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=495 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=24.371 memavail=566916 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18545.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=496 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=24.392 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18546.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=497 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=24.416 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18547.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=498 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.438 memavail=566460 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18548.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=499 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.461 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18549.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=500 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.482 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18550.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=501 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.505 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18551.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=502 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=24.526 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18552.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=503 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=24.548 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18553.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=504 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=24.569 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18554.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=505 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=24.592 memavail=567028 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18555.8: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=506 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=24.612 memavail=567036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18556.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=507 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=24.635 memavail=567036 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18557.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=508 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=24.657 memavail=567068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18558.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=509 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=24.679 memavail=567068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18559.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=510 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=24.700 memavail=567068 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18560.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=511 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=24.723 memavail=567084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18561.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=512 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=24.743 memavail=567084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18562.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=513 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=24.765 memavail=567084 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18563.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=514 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=24.786 memavail=566836 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18564.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=515 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=24.809 memavail=567624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18565.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=516 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=24.830 memavail=567624 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18566.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=517 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=24.856 memavail=567388 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18567.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=518 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=24.877 memavail=567392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18568.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=519 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=24.900 memavail=567392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18569.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=520 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=24.921 memavail=567392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18570.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=522 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=24.944 memavail=567392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18571.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=523 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=24.965 memavail=567392 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18572.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=524 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=24.989 memavail=567428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18573.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=525 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=25.010 memavail=567428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18574.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=526 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=25.031 memavail=566712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18575.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=527 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=25.049 memavail=566716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18576.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=528 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.87 cputime=25.072 memavail=566716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18577.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=529 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=25.093 memavail=566716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18578.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=530 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=25.116 memavail=566716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18579.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=531 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=25.138 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18580.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=532 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=25.163 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18581.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=533 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.88 cputime=25.185 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18582.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=534 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=25.207 memavail=566720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18583.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=535 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=25.224 memavail=566484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18584.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=536 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=25.246 memavail=566768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18585.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=537 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=25.263 memavail=566768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18586.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=538 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.89 cputime=25.286 memavail=566768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18587.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=539 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=25.307 memavail=566768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18588.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=540 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=25.330 memavail=566768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18589.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=541 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=25.351 memavail=566768 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18590.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=542 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=25.374 memavail=566536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18591.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=543 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.90 cputime=25.394 memavail=566536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18592.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=544 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=25.418 memavail=566536 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18593.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=545 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=25.439 memavail=566592 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18594.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=546 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=25.463 memavail=566344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18595.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=547 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=25.484 memavail=566348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18596.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=548 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.82 cputime=25.508 memavail=566348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18597.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=549 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=25.529 memavail=566348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18598.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=550 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=25.552 memavail=566348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18599.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=551 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=25.573 memavail=566560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18600.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=552 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=25.597 memavail=566652 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18601.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=553 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.76 cputime=25.619 memavail=566656 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18602.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=554 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=25.643 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18603.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=555 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=25.663 memavail=566472 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18604.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=556 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=25.686 memavail=566468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18605.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=557 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=25.709 memavail=566508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18606.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=558 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.78 cputime=25.732 memavail=566508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18607.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=559 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=25.753 memavail=566508 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18608.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=560 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=25.777 memavail=566728 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18609.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=561 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=25.798 memavail=566776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18610.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=562 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=25.821 memavail=566776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18611.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=563 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.80 cputime=25.842 memavail=566780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18612.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=564 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=25.864 memavail=566780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18613.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=565 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=25.885 memavail=566780 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18614.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=566 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=25.907 memavail=567092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18615.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=567 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=25.928 memavail=567092 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18616.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=568 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.81 cputime=25.951 memavail=567016 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18617.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=569 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=25.973 memavail=566868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18618.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=570 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=25.996 memavail=566868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18619.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=571 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=26.017 memavail=566868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18620.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=572 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=26.040 memavail=566868 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18621.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=573 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.83 cputime=26.060 memavail=566880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18622.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=574 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=26.083 memavail=566880 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18623.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=575 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=26.103 memavail=566888 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18624.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=576 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=26.125 memavail=567144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18625.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=577 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=26.143 memavail=567208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18626.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=578 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.84 cputime=26.166 memavail=566972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 18627.9: gcodein=0  mcu: mcu_awake=0.005 mcu_task_avg=0.000062 mcu_task_stddev=0.000064 bytes_write=11717 bytes_read=15901 bytes_retransmit=184 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=308 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 stalled_bytes=579 freq=15999218 heater_bed: target=0 temp=138.7 pwm=0.000 sysload=0.85 cputime=26.187 memavail=566724 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000