===== Config file =====
[force_move]
enable_force_move = true

[virtual_sdcard]
path = /home/tech/printer_data/gcodes

[exclude_object]

[pause_resume]

[display_status]

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[gcode_macro _globals]
variable_filament_sensor_enabled = 1
variable_beeping_enabled = 0
variable_bed_temp_over = 10
variable_kamp_enable = 0
variable_pre_purge_prime_length = 1.40
gcode = 

[gcode_macro CONDITIONAL_BEEP]
gcode = 
	
	{% set i = params.I|default(1)|int %}
	{% set dur = params.DUR|default(100)|int %}
	{% set freq = params.FREQ|default(2000)|int %}
	
	{% set BEEPING_ENABLED=printer["gcode_macro _globals"].beeping_enabled|default(-1)|int %}
	
	{% if BEEPING_ENABLED == 1 %}
	BEEP I={i} DUR={dur} FREQ={freq}
	{% endif %}

[gcode_macro ADJUST_FILAMENT_SENSOR_STATUS]
gcode = 
	
	{% set NEWSTATUS = params.ENABLE|default(-1)|int %}
	
	{% set FILAMENT_SENSOR_ENABLED=printer["gcode_macro _globals"].filament_sensor_enabled|default(-1)|int %}
	
	{% if FILAMENT_SENSOR_ENABLED == 1 and NEWSTATUS != -1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	
	{% set s = params.S|float %}
	
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	
	{% set s = params.S|float %}
	
	M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}
	{% endif %}

[gcode_macro PURGE_LINE]
gcode = 
	{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	
	{% set extrudeAmount = 26.6 %}
	{% set movementLength = 100.0 %}
	{% set movementSpeed = 15 * 60 %}
	{% set xStart = 0.5 %}
	{% set yStart = 0.5 %}
	
	
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
	
	G92 E0.0
	G90
	G0 X{xStart} Y{yStart} F{maxVelocityAdjusted}
	G1 Z0.4 F500.0
	M83
	G1 E{PRE_PURGE_PRIME_LENGTH} F500
	G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed}
	
	G92 E0.0
	M82
	G1 Z5.0

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT

[gcode_macro PRINT_START]
gcode = 
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	{% set bedtemp = params.BED|int %}
	{% set hotendtemp = params.HOTEND|int %}
	{% set chambertemp = params.CHAMBER|default(0)|int %}
	
	
	{% set bedtempSlicer = bedtemp %}
	{% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set maxVelocityAdjusted =  (0.90 * maxVelocity * 60)|int %}
	{% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
	
	{% if printer.configfile.settings.safe_z_home %}
	{% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
	{% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
	{% endif %}
	
	{% set bedtempAlmost = ((bedtemp - 2, 0, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
	{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
	{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
	
	
	{% if bedtempAlmost > bedtemp %}
	{% if (bedtempAlmost - bedtempOver) <= bedtemp %}
	{% set bedtemp = bedtempAlmost %}
	{% endif %}
	{% endif %}
	
	G90
	M140 S{bedtempAlmost}
	M104 S{hotendtempStepOne}
	G28 X Y
	{% if printer.configfile.settings.safe_z_home %}
	G1 X{startX} Y{startY} F{maxVelocityAdjusted}
	{% endif %}
	
	M190 S{bedtempAlmost}
	{% if kampEnabled == 0 %}
	M104 S{hotendtempStepTwo}
	{% endif %}
	M190 S{bedtemp}
	M140 S{bedtempSlicer}
	
	{% if kampEnabled == 0 %}
	BED_MESH_PROFILE LOAD=default
	M104 S{hotendtemp}
	G28 Z
	{% else %}
	G28 Z
	BED_MESH_CALIBRATE
	M104 S{hotendtemp}
	{% endif %}
	
	G1 X0 Y0 F{maxVelocityAdjusted}
	M109 S{hotendtemp}
	
	G1 Z20 F3000

[gcode_macro PRINT_END]
gcode = 
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
	CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500
	{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
	
	M400
	G92 E0
	G1 E-{PRE_PURGE_PRIME_LENGTH} F400
	G91
	
	
	{% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set zVelocityAdjusted =  (0.95 * zVelocity * 60)|int  %}
	{% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
	
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
	
	
	{% if printer.toolhead.position.x < (max_x - 20) %}
	{% set x_safe = 20.0 %}
	{% else %}
	{% set x_safe = -20.0 %}
	{% endif %}
	
	{% if printer.toolhead.position.y < (max_y - 20) %}
	{% set y_safe = 20.0 %}
	{% else %}
	{% set y_safe = -20.0 %}
	{% endif %}
	
	{% set lift_height = 25.0 %}
	{% if printer.toolhead.position.z < (max_z - lift_height) %}
	{% set z_safe = lift_height %}
	{% else %}
	{% set z_safe = max_z - printer.toolhead.position.z %}
	{% endif %}
	
	G0 Z{z_safe} F{zVelocityAdjusted}
	G0 X{x_safe} Y{y_safe} F{maxVelocityAdjusted}
	TURN_OFF_HEATERS
	M107
	G90
	G0 X60 Y{max_y} F3600

[gcode_macro LOAD_FILAMENT]
gcode = 
	M83
	G1 E30 F300
	G1 E15 F150
	M82

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	M83
	G1 E10 F300
	G1 E-40 F1800
	M82

[gcode_macro M600]
gcode = 
	CONDITIONAL_BEEP i=1 dur=300
	CONDITIONAL_BEEP i=1 dur=100
	CONDITIONAL_BEEP i=1 dur=100
	PAUSE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
	
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro _CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro BEEP]
description = BEEP I=3 DUR=200 FREQ=2000: Beep 3 times, for 200ms each, at 2kHz frequency.
gcode = 
	
	{% set i = params.I|default(1)|int %}
	{% set dur = params.DUR|default(100)|int %}
	{% set freq = params.FREQ|default(2000)|int %}
	
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKREAR
	G90
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKBED
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro MECHANICAL_GANTRY_CALIBRATION]
gcode = 
	
	{% set my_current = params.CURRENT|default(0.20)|float %}
	
	{% set oldcurrent = printer.configfile.settings["tmc2209 stepper_z"].run_current %}
	{% set oldhold = printer.configfile.settings["tmc2209 stepper_z"].hold_current %}
	{% set x_max = printer.toolhead.axis_maximum.x %}
	{% set y_max = printer.toolhead.axis_maximum.y %}
	{% set z_max = printer.toolhead.axis_maximum.z %}
	{% set fast_move_z = printer.configfile.settings["printer"].max_z_velocity %}
	{% set fast_move = printer.configfile.settings["printer"].max_velocity %}
	M117 {printer.homed_axes}
	{% if printer.homed_axes != 'xyz' %}
	G28
	{% endif %}
	G90
	G0 X{x_max / 2} Y{y_max / 2} F{fast_move * 30 }
	
	G0 Z{z_max -5} F{fast_move_z * 60 }
	
	SET_TMC_CURRENT STEPPER=stepper_z CURRENT={my_current}
	
	{% if printer.configfile.settings["stepper_z1"] %}
	SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current}
	{% endif %}
	
	
	G4 P200
	
	SET_KINEMATIC_POSITION Z={z_max - 25}
	
	G1 Z{z_max} F{6 * 60}
	
	G4 P10000
	G1 Z{z_max -6} F{6 * 60}
	
	G4 P200
	
	SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold}
	
	{% if printer.configfile.settings["stepper_z1"] %}
	SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={oldcurrent} HOLDCURRENT={oldhold}
	{% endif %}
	
	G1 Z{z_max -30} F{6 * 60}
	
	G4 P200
	G28 Z

[gcode_macro G34]
gcode = 
	MECHANICAL_GANTRY_CALIBRATION

[gcode_macro PID_TEST_BED]
gcode = 
	
	{% set TARGETTEMP = params.TEMP|default(70)|int %}
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	G28
	G90
	G1 X{max_x/2} Y{max_y/2} Z40 F6000
	PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}

[gcode_macro PID_TEST_HOTEND]
gcode = 
	
	{% set TARGETTEMP = params.TEMP|default(245)|int %}
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	G28
	G90
	G1 X{max_x/2} Y{max_y/2} Z10 F6000
	M106 S64
	PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}

[gcode_macro PID_TEST_ALL]
gcode = 
	PID_TEST_BED
	PID_TEST_HOTEND
	SAVE_CONFIG

[gcode_macro DO_PROBE_CALIBRATE]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	PROBE_CALIBRATE

[gcode_macro DO_AXIS_TWIST_CALIBRATION]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	AXIS_TWIST_COMPENSATION_CALIBRATE

[gcode_macro DO_SAVE_CONFIG]
gcode = 
	SAVE_CONFIG

[gcode_macro DO_CREATE_MESH]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	_BED_MESH_CALIBRATE

[gcode_macro ENABLE_MOTORS]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
	SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
	SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x, min_points]|max %}
	{% set points_y = [points_y, min_points]|max %}
	{% set points_x = [points_x, probe_count[0]]|min %}
	{% set points_y = [points_y, probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro TEST_SPEED]
gcode = 
	
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	
	{% set iterations = params.ITERATIONS|default(5)|int %}
	
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	
	{% set bound = params.BOUND|default(20)|int %}
	
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	
	
	
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	
	
	
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	
	
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	
	
	SAVE_GCODE_STATE NAME=TEST_SPEED
	
	
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	
	
	M400
	G28
	
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	
	G90
	G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
	M400
	G28 X Y
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	
	
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	
	{% for i in range(iterations) %}
	
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	
	
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	
	
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	
	
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	
	
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	
	
	M400
	G28
	
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[mcu]
serial = /dev/pts/2
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 200
max_accel = 3000
max_z_velocity = 15
max_z_accel = 45
square_corner_velocity = 8.0

[stepper_x]
step_pin = PB13
dir_pin = PB12
enable_pin = !PB14
microsteps = 128
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 40
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 0
driver_sgthrs = 86
diag_pin = PC0

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 128
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 40
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 2
driver_sgthrs = 81
diag_pin = PC1

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 128
rotation_distance = 4
endstop_pin = probe:z_virtual_endstop
position_min = -4
position_max = 340
homing_speed = 5

[tmc2209 stepper_z]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 1

[extruder]
step_pin = PB3
dir_pin = PB4
enable_pin = !PD1
microsteps = 128
rotation_distance = 4.65
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 300
max_extrude_only_distance = 150.0
control = pid
pid_kp = 25.397
pid_ki = 1.992
pid_kd = 80.954

[tmc2209 extruder]
uart_pin = PC11
tx_pin = PC10
run_current = 0.550
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 3

[heater_bed]
heater_pin = PC9
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 110
control = pid
pid_kp = 73.292
pid_ki = 1.086
pid_kd = 1236.800

[probe]
pin = PC14
x_offset = 27
y_offset = -20
samples = 3
samples_result = median
samples_tolerance = 0.01
samples_tolerance_retries = 5
z_offset = 1.550

[safe_z_home]
home_xy_position = 123, 170
speed = 100.0
z_hop = 10
z_hop_speed = 15

[bed_mesh]
speed = 175
mesh_min = 30, 30
mesh_max = 270, 270
probe_count = 5,5
algorithm = bicubic
fade_start = 1
fade_end = 10
fade_target = 0

[fan]
pin = PC6

[controller_fan electronic_enclosure_fan]
pin = PC7
idle_timeout = 60
idle_speed = 0
stepper = stepper_x, stepper_y, stepper_z

[heater_fan hotend_fan]
pin = PB15
heater = extruder
heater_temp = 50.0

[output_pin beeper]
pin = PB5
value = 0
shutdown_value = 0
pwm = True
cycle_time = 0.0005

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PD6, EXP1_10=<5V>

[axis_twist_compensation]
calibrate_start_x = 27
calibrate_end_x = 280
calibrate_y = 150
z_compensations = 0.117448, -0.035990, -0.081458
compensation_start_x = 27.0
compensation_end_x = 280.0

[bed_mesh default]
version = 1
points = 
	-0.208910, -0.126374, -0.144933, -0.196749, -0.302378
	-0.057504, -0.027156, -0.051808, -0.131593, -0.236440
	-0.010472, 0.019251, -0.030401, -0.110187, -0.239097
	-0.051566, -0.029031, -0.072276, -0.170031, -0.295503
	-0.170941, -0.080124, -0.113839, -0.225656, -0.404409
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 30.0
max_x = 270.0
min_y = 30.0
max_y = 270.0
=======================
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:10.3-2021.07-4) 10.3.1 20210621 (release) binutils: (2.38-3ubuntu1+15build1) 2.38)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PF0,PF1 RESERVE_PINS_serial=PA3,PA2 SERIAL_BAUD=115200 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Args: ['/home/tech/klipper/klippy/klippy.py', '/home/tech/printer_data/config/printer.cfg', '-I', '/home/tech/printer_data/comms/klippy.serial', '-l', '/home/tech/printer_data/logs/klippy.log', '-a', '/home/tech/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-257-ged66982b'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core QEMU Virtual CPU version 2.5+
Python: '3.10.12 (main, Jun 11 2023, 05:26:28) [GCC 11.4.0]'
webhooks client 139676229186416: {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
=============== Log rollover at Sat Aug 12 00:00:00 2023 ===============
Stats 264032.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2547 bytes_read=11165 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998981  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.00 cputime=880.938 memavail=3471676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 264033.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2553 bytes_read=11286 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998982  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.00 cputime=880.943 memavail=3471676 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 264034.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2559 bytes_read=11407 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998982  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.00 cputime=880.947 memavail=3471704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 264035.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2565 bytes_read=11513 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998979  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.00 cputime=880.951 memavail=3471704 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.6 pwm=0.000
Stats 264036.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2571 bytes_read=11634 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998982  heater_bed: target=0 temp=49.5 pwm=0.000 sysload=0.00 cputime=880.956 memavail=3471712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 264037.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2577 bytes_read=11768 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998980  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.00 cputime=880.960 memavail=3471712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 264038.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2583 bytes_read=11874 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998976  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.00 cputime=880.964 memavail=3471712 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.2 pwm=0.000
Stats 264039.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2589 bytes_read=11995 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998981  heater_bed: target=0 temp=49.4 pwm=0.000 sysload=0.00 cputime=880.968 memavail=3471716 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 264040.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2595 bytes_read=12116 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998991  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.00 cputime=880.973 memavail=3472232 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 264041.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2601 bytes_read=12222 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998991  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.00 cputime=880.977 memavail=3472664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.9 pwm=0.000
Stats 264042.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2607 bytes_read=12356 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998989  heater_bed: target=0 temp=49.3 pwm=0.000 sysload=0.00 cputime=880.982 memavail=3472736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 264043.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2613 bytes_read=12477 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998990  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.00 cputime=880.986 memavail=3472736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.7 pwm=0.000
Stats 264044.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2619 bytes_read=12583 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998990  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.00 cputime=880.990 memavail=3472736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 264045.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2625 bytes_read=12704 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998989  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.00 cputime=880.994 memavail=3472736 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000
Stats 264046.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2631 bytes_read=12825 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998988  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.00 cputime=880.998 memavail=3472748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 264047.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2637 bytes_read=12940 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998986  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.00 cputime=881.002 memavail=3472748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 264048.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2643 bytes_read=13052 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998985  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.00 cputime=881.007 memavail=3472748 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Stats 264049.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2649 bytes_read=13165 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998986  heater_bed: target=0 temp=49.1 pwm=0.000 sysload=0.00 cputime=881.011 memavail=3472752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.1 pwm=0.000
Stats 264050.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2655 bytes_read=13264 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998994  heater_bed: target=0 temp=49.2 pwm=0.000 sysload=0.00 cputime=881.015 memavail=3472776 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.0 pwm=0.000
Heater extruder approaching new target of 200.000
Stats 264052.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2686 bytes_read=13519 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=260 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998988  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.00 cputime=881.025 memavail=3472780 print_time=71.671 buffer_time=0.157 print_stall=0 extruder: target=200 temp=49.8 pwm=0.000
Stats 264053.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2733 bytes_read=13651 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998996  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.00 cputime=881.030 memavail=3472780 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.8 pwm=1.000
Stats 264054.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2739 bytes_read=13787 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998995  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.00 cputime=881.035 memavail=3472780 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.6 pwm=1.000
Stats 264055.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2745 bytes_read=13893 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998994  heater_bed: target=0 temp=49.0 pwm=0.000 sysload=0.00 cputime=881.039 memavail=3472780 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.5 pwm=1.000
Stats 264056.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2751 bytes_read=13999 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998994  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.00 cputime=881.043 memavail=3472788 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.5 pwm=1.000
Stats 264057.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2773 bytes_read=14153 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998983  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.00 cputime=881.048 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.3 pwm=1.000
Stats 264058.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2779 bytes_read=14259 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998978  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.00 cputime=881.052 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.2 pwm=1.000
Stats 264059.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2785 bytes_read=14365 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998984  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.00 cputime=881.056 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.1 pwm=1.000
Stats 264060.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2791 bytes_read=14501 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998987  heater_bed: target=0 temp=48.9 pwm=0.000 sysload=0.00 cputime=881.061 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.0 pwm=1.000
Stats 264061.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2813 bytes_read=14612 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998985  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.00 cputime=881.065 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=48.9 pwm=1.000
Stats 264062.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2819 bytes_read=14746 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998986  heater_bed: target=0 temp=48.8 pwm=0.000 sysload=0.00 cputime=881.070 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=48.9 pwm=1.000
Stats 264063.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2825 bytes_read=14867 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998989  heater_bed: target=0 temp=48.7 pwm=0.000 sysload=0.00 cputime=881.074 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=48.7 pwm=1.000
Stats 264064.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2831 bytes_read=14973 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998987  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.00 cputime=881.078 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=48.7 pwm=1.000
Stats 264065.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2853 bytes_read=15099 bytes_retransmit=0 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998993  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.00 cputime=881.083 memavail=3471784 print_time=71.671 buffer_time=0.000 print_stall=0 extruder: target=200 temp=48.6 pwm=1.000
Stats 264066.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2872 bytes_read=15225 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998994  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.00 cputime=881.088 memavail=3471784 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.4 pwm=0.000
Stats 264067.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2899 bytes_read=15349 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998994  heater_bed: target=0 temp=48.7 pwm=0.000 sysload=0.00 cputime=881.092 memavail=3471792 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.4 pwm=0.000
Stats 264068.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2905 bytes_read=15470 bytes_retransmit=0 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998995  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.00 cputime=881.097 memavail=3471792 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.7 pwm=0.000
Stats 264069.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2911 bytes_read=15591 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998994  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.00 cputime=881.101 memavail=3471792 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.3 pwm=0.000
Stats 264070.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2917 bytes_read=15697 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998998  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.00 cputime=881.105 memavail=3471800 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.2 pwm=0.000
Stats 264071.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2923 bytes_read=15818 bytes_retransmit=0 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999002  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.00 cputime=881.110 memavail=3471800 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.2 pwm=0.000
Stats 264072.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2929 bytes_read=15952 bytes_retransmit=0 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999010  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.00 cputime=881.114 memavail=3471800 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=48.0 pwm=0.000
Stats 264073.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2935 bytes_read=16058 bytes_retransmit=0 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999015  heater_bed: target=0 temp=48.6 pwm=0.000 sysload=0.00 cputime=881.118 memavail=3471800 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.9 pwm=0.000
Stats 264074.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2941 bytes_read=16179 bytes_retransmit=0 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999015  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.00 cputime=881.123 memavail=3471800 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.8 pwm=0.000
Stats 264075.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2947 bytes_read=16300 bytes_retransmit=0 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999013  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.00 cputime=881.127 memavail=3471804 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.7 pwm=0.000
Stats 264076.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2953 bytes_read=16406 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999009  heater_bed: target=0 temp=48.5 pwm=0.000 sysload=0.00 cputime=881.131 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.8 pwm=0.000
Stats 264077.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2959 bytes_read=16540 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999011  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.00 cputime=881.136 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.7 pwm=0.000
Stats 264078.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2965 bytes_read=16661 bytes_retransmit=0 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999010  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.00 cputime=881.140 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.7 pwm=0.000
Stats 264079.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2971 bytes_read=16767 bytes_retransmit=0 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999006  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.00 cputime=881.144 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.5 pwm=0.000
Stats 264080.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2977 bytes_read=16888 bytes_retransmit=0 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999001  heater_bed: target=0 temp=48.4 pwm=0.000 sysload=0.00 cputime=881.149 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.6 pwm=0.000
Stats 264081.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2983 bytes_read=17009 bytes_retransmit=0 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998997  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.00 cputime=881.153 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.4 pwm=0.000
Stats 264082.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2989 bytes_read=17128 bytes_retransmit=0 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998997  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.00 cputime=881.157 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000
Stats 264083.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2995 bytes_read=17249 bytes_retransmit=0 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63998998  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.00 cputime=881.162 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000
Stats 264084.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3001 bytes_read=17370 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999001  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.00 cputime=881.166 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.3 pwm=0.000
Stats 264085.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3007 bytes_read=17476 bytes_retransmit=0 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999010  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.00 cputime=881.170 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.1 pwm=0.000
Stats 264086.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3013 bytes_read=17597 bytes_retransmit=0 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999012  heater_bed: target=0 temp=48.3 pwm=0.000 sysload=0.00 cputime=881.175 memavail=3471808 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.1 pwm=0.000
Stats 264087.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3019 bytes_read=17731 bytes_retransmit=0 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999014  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.00 cputime=881.179 memavail=3471816 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.0 pwm=0.000
Stats 264088.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3025 bytes_read=17837 bytes_retransmit=0 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999016  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.00 cputime=881.183 memavail=3471816 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.0 pwm=0.000
Stats 264089.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3031 bytes_read=17958 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999016  heater_bed: target=0 temp=48.2 pwm=0.000 sysload=0.00 cputime=881.188 memavail=3471844 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=47.0 pwm=0.000
Stats 264090.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3037 bytes_read=18079 bytes_retransmit=0 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999012  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.00 cputime=881.192 memavail=3471628 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.9 pwm=0.000
Stats 264091.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3043 bytes_read=18185 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999016  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.00 cputime=881.196 memavail=3471628 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.8 pwm=0.000
Stats 264092.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3049 bytes_read=18319 bytes_retransmit=0 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999018  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.00 cputime=881.201 memavail=3471628 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.8 pwm=0.000
Stats 264093.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3055 bytes_read=18440 bytes_retransmit=0 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999018  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.00 cputime=881.205 memavail=3471628 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.6 pwm=0.000
Stats 264094.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3061 bytes_read=18546 bytes_retransmit=0 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999029  heater_bed: target=0 temp=48.1 pwm=0.000 sysload=0.00 cputime=881.209 memavail=3471628 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.7 pwm=0.000
Stats 264095.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3067 bytes_read=18667 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999028  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.00 cputime=881.214 memavail=3471632 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.8 pwm=0.000
Stats 264096.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3073 bytes_read=18788 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999021  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.00 cputime=881.218 memavail=3471640 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.6 pwm=0.000
Stats 264097.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3079 bytes_read=18894 bytes_retransmit=0 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999017  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.00 cputime=881.222 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.4 pwm=0.000
Stats 264098.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3085 bytes_read=19028 bytes_retransmit=0 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999019  heater_bed: target=0 temp=48.0 pwm=0.000 sysload=0.00 cputime=881.227 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.5 pwm=0.000
Stats 264099.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3091 bytes_read=19149 bytes_retransmit=0 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999019  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.00 cputime=881.231 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.4 pwm=0.000
Stats 264100.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3097 bytes_read=19255 bytes_retransmit=0 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999018  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.00 cputime=881.235 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.3 pwm=0.000
Stats 264101.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3103 bytes_read=19376 bytes_retransmit=0 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999016  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.00 cputime=881.240 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.2 pwm=0.000
Stats 264102.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3109 bytes_read=19497 bytes_retransmit=0 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999016  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.00 cputime=881.244 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.2 pwm=0.000
Stats 264103.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3115 bytes_read=19616 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999024  heater_bed: target=0 temp=47.9 pwm=0.000 sysload=0.00 cputime=881.248 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.1 pwm=0.000
Stats 264104.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3121 bytes_read=19737 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999024  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.00 cputime=881.253 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.2 pwm=0.000
Stats 264105.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3127 bytes_read=19858 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999025  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.00 cputime=881.257 memavail=3471644 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.1 pwm=0.000
Stats 264106.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3133 bytes_read=19964 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999037  heater_bed: target=0 temp=47.8 pwm=0.000 sysload=0.00 cputime=881.261 memavail=3471648 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.0 pwm=0.000
Stats 264107.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3139 bytes_read=20085 bytes_retransmit=0 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999035  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.00 cputime=881.265 memavail=3471648 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.9 pwm=0.000
Stats 264108.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3145 bytes_read=20219 bytes_retransmit=0 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999033  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.00 cputime=881.270 memavail=3471660 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=46.0 pwm=0.000
Stats 264109.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3151 bytes_read=20325 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999030  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.00 cputime=881.274 memavail=3471660 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.8 pwm=0.000
Stats 264110.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3157 bytes_read=20446 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999026  heater_bed: target=0 temp=47.7 pwm=0.000 sysload=0.00 cputime=881.278 memavail=3471660 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.8 pwm=0.000
Stats 264111.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3163 bytes_read=20567 bytes_retransmit=0 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999023  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.00 cputime=881.283 memavail=3471660 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.8 pwm=0.000
Stats 264112.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3169 bytes_read=20673 bytes_retransmit=0 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999020  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.00 cputime=881.287 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.8 pwm=0.000
Stats 264113.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3175 bytes_read=20807 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999022  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.00 cputime=881.291 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.6 pwm=0.000
Stats 264114.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3187 bytes_read=20938 bytes_retransmit=0 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999024  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.00 cputime=881.296 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.6 pwm=0.000
Stats 264115.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3193 bytes_read=21037 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999025  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.00 cputime=881.300 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000
Stats 264116.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3199 bytes_read=21150 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999021  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.00 cputime=881.305 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000
Stats 264117.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3205 bytes_read=21263 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999024  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.00 cputime=881.309 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000
Stats 264118.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3211 bytes_read=21379 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999026  heater_bed: target=0 temp=47.6 pwm=0.000 sysload=0.00 cputime=881.313 memavail=3471664 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.5 pwm=0.000
Stats 264119.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3217 bytes_read=21500 bytes_retransmit=0 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999026  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.00 cputime=881.318 memavail=3471440 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000
Stats 264120.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3223 bytes_read=21621 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999026  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.00 cputime=881.322 memavail=3471440 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000
Stats 264121.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3229 bytes_read=21727 bytes_retransmit=0 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999026  heater_bed: target=0 temp=47.5 pwm=0.000 sysload=0.00 cputime=881.326 memavail=3471440 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.4 pwm=0.000
Stats 264122.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=3235 bytes_read=21848 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999030  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.00 cputime=881.331 memavail=3471576 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.3 pwm=0.000
Stats 264123.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3241 bytes_read=21982 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999048  heater_bed: target=0 temp=47.3 pwm=0.000 sysload=0.00 cputime=881.335 memavail=3471576 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.1 pwm=0.000
Stats 264124.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3247 bytes_read=22088 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999046  heater_bed: target=0 temp=47.4 pwm=0.000 sysload=0.00 cputime=881.339 memavail=3471576 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.2 pwm=0.000
Stats 264125.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3253 bytes_read=22209 bytes_retransmit=0 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999048  heater_bed: target=0 temp=47.2 pwm=0.000 sysload=0.00 cputime=881.343 memavail=3471576 print_time=85.240 buffer_time=0.000 print_stall=0 extruder: target=0 temp=45.1 pwm=0.000
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264426.37390774034, '#receive_time': 264427.36250860064}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264427.38863678166}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264427.43976636464}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264427.54091357865}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264427.74204579566}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264428.1435428126}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264428.34737944865}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264429.15443999367}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264429.33183188963}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264429.32812002936, '#receive_time': 264430.3168462006}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264430.31292359234, '#receive_time': 264431.30153884366}
Timeout with MCU 'mcu' (eventtime=264431.463885)
Transition to shutdown state: Lost communication with MCU 'mcu'
Dumping gcode input 0 blocks
Dumping 20 requests for client 139676229186416
Received 263984.196657: b'{"id": 140298836538368, "method": "gcode/subscribe_output", "params": {"response_template": {"method": "process_gcode_response"}}}'
Received 263984.197526: b'{"id": 140298808372448, "method": "list_endpoints", "params": {}}'
Received 263984.198150: b'{"id": 140298836090720, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 263984.448026: b'{"id": 140298836090144, "method": "objects/list", "params": {}}'
Received 263984.448565: b'{"id": 140298836089472, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 263984.699860: b'{"id": 140298836092400, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 263984.700407: b'{"id": 140298836090624, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 263984.700835: b'{"id": 140298836092400, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 263984.701259: b'{"id": 140298836090624, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 263984.702159: b'{"id": 140298836567296, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 263984.702349: b'{"id": 140298808363184, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 263984.705939: b'{"id": 140298836569216, "method": "info", "params": {}}'
Received 263984.705939: b'{"id": 140298836565376, "method": "objects/list", "params": {}}'
Received 263984.705939: b'{"id": 140298836568688, "method": "gcode/help", "params": {}}'
Received 263984.721855: b'{"id": 140298836564608, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "configfile": null, "mcu": null, "gcode_move": null, "print_stats": null, "virtual_sdcard": null, "exclude_object": null, "pause_resume": null, "display_status": null, "gcode_macro _globals": null, "gcode_macro CONDITIONAL_BEEP": null, "gcode_macro ADJUST_FILAMENT_SENSOR_STATUS": null, "gcode_macro M109": null, "gcode_macro M190": null, "gcode_macro PURGE_LINE": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro _CG28": null, "gcode_macro BEEP": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro MECHANICAL_GANTRY_CALIBRATION": null, "gcode_macro G34": null, "gcode_macro PID_TEST_BED": null, "gcode_macro PID_TEST_HOTEND": null, "gcode_macro PID_TEST_ALL": null, "gcode_macro DO_PROBE_CALIBRATE": null, "gcode_macro DO_AXIS_TWIST_CALIBRATION": null, "gcode_macro DO_SAVE_CONFIG": null, "gcode_macro DO_CREATE_MESH": null, "gcode_macro ENABLE_MOTORS": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro _KAMP_Settings": null, "gcode_macro TEST_SPEED": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 extruder": null, "heaters": null, "heater_bed": null, "probe": null, "bed_mesh": null, "fan": null, "controller_fan electronic_enclosure_fan": null, "heater_fan hotend_fan": null, "output_pin beeper": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 263984.952752: b'{"id": 140298836083664, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "gcode_move": null, "virtual_sdcard": null, "exclude_object": null, "pause_resume": null, "display_status": null, "gcode_macro _globals": null, "gcode_macro CONDITIONAL_BEEP": null, "gcode_macro ADJUST_FILAMENT_SENSOR_STATUS": null, "gcode_macro M109": null, "gcode_macro M190": null, "gcode_macro PURGE_LINE": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro _CG28": null, "gcode_macro BEEP": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro MECHANICAL_GANTRY_CALIBRATION": null, "gcode_macro G34": null, "gcode_macro PID_TEST_BED": null, "gcode_macro PID_TEST_HOTEND": null, "gcode_macro PID_TEST_ALL": null, "gcode_macro DO_PROBE_CALIBRATE": null, "gcode_macro DO_AXIS_TWIST_CALIBRATION": null, "gcode_macro DO_SAVE_CONFIG": null, "gcode_macro DO_CREATE_MESH": null, "gcode_macro ENABLE_MOTORS": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro _KAMP_Settings": null, "gcode_macro TEST_SPEED": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 extruder": null, "heaters": null, "probe": null, "bed_mesh": null, "fan": null, "controller_fan electronic_enclosure_fan": null, "heater_fan hotend_fan": null, "output_pin beeper": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 263985.203139: b'{"id": 140298836093168, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "gcode_move": null, "virtual_sdcard": null, "exclude_object": null, "pause_resume": null, "display_status": null, "gcode_macro _globals": null, "gcode_macro CONDITIONAL_BEEP": null, "gcode_macro ADJUST_FILAMENT_SENSOR_STATUS": null, "gcode_macro M109": null, "gcode_macro M190": null, "gcode_macro PURGE_LINE": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro _CG28": null, "gcode_macro BEEP": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro MECHANICAL_GANTRY_CALIBRATION": null, "gcode_macro G34": null, "gcode_macro PID_TEST_BED": null, "gcode_macro PID_TEST_HOTEND": null, "gcode_macro PID_TEST_ALL": null, "gcode_macro DO_PROBE_CALIBRATE": null, "gcode_macro DO_AXIS_TWIST_CALIBRATION": null, "gcode_macro DO_SAVE_CONFIG": null, "gcode_macro DO_CREATE_MESH": null, "gcode_macro ENABLE_MOTORS": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro _KAMP_Settings": null, "gcode_macro TEST_SPEED": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 extruder": null, "heaters": null, "probe": null, "bed_mesh": null, "fan": null, "controller_fan electronic_enclosure_fan": null, "heater_fan hotend_fan": null, "output_pin beeper": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 263985.401114: b'{"id": 140298836563696, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 264052.075483: b'{"id": 140298836600208, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=200"}}'
Received 264065.644048: b'{"id": 140298808127072, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=0"}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (263985.451713702, 0.0, 0.0)
mcu 'mcu': got {'#name': 'emergency_stop', '#sent_time': 264431.29766305134, '#receive_time': 264431.46888733364}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264431.46506641636, '#receive_time': 264432.28571063466}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264433.20785648463}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 0.0, '#receive_time': 264433.26988393965}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264433.2661665404, '#receive_time': 264434.25465675665}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264434.25085856736, '#receive_time': 264435.23982694565}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264435.23601639335, '#receive_time': 264436.22416013567}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264436.22033890535, '#receive_time': 264437.2090837166}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264437.20524524234, '#receive_time': 264438.1943643636}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264438.19045345834, '#receive_time': 264439.17911817564}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264439.17529068934, '#receive_time': 264440.16434824566}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264440.16048403335, '#receive_time': 264441.14880396466}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264441.1449535384, '#receive_time': 264442.1329795686}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264442.12917097134, '#receive_time': 264443.1180215706}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264443.11418459937, '#receive_time': 264444.10213219863}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264444.09831386834, '#receive_time': 264445.08720250067}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264445.08335237537, '#receive_time': 264446.0714437366}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264446.0676223084, '#receive_time': 264447.0562053276}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264447.05247130134, '#receive_time': 264448.04049954563}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264448.0367804674, '#receive_time': 264449.02499295265}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264449.02118511434, '#receive_time': 264450.00922229065}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264450.00548798934, '#receive_time': 264450.99358256266}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264450.9898985224, '#receive_time': 264451.9779462246}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264451.97418218537, '#receive_time': 264452.9628090956}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264452.9590565034, '#receive_time': 264453.94741042063}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264453.94344865036, '#receive_time': 264454.9315272676}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264454.92776339536, '#receive_time': 264455.9158973416}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264455.91205637733, '#receive_time': 264456.90033611766}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264456.8965238784, '#receive_time': 264457.8846402856}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264457.8808381344, '#receive_time': 264458.86884916766}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264458.8651073584, '#receive_time': 264459.85312403564}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264459.84945194336, '#receive_time': 264460.83790884766}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264460.8341524884, '#receive_time': 264461.8230204656}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264461.81919864437, '#receive_time': 264462.80809103267}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264462.80426097335, '#receive_time': 264463.79282991664}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264463.7890274044, '#receive_time': 264464.77789968764}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264464.77406851336, '#receive_time': 264465.76244972966}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264465.75863943936, '#receive_time': 264466.74758653966}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264466.74372688535, '#receive_time': 264467.73198743165}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264467.72819091036, '#receive_time': 264468.71635388164}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264468.71240945935, '#receive_time': 264469.70078865666}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264469.69691261835, '#receive_time': 264470.68563416164}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264470.6818401954, '#receive_time': 264471.67040873267}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264471.66660953336, '#receive_time': 264472.6546749136}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264472.65083280037, '#receive_time': 264473.6390285096}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264473.63532134437, '#receive_time': 264474.62329173565}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264474.61955027835, '#receive_time': 264475.60790354165}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264475.60408787534, '#receive_time': 264476.59327773965}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264476.5890404914, '#receive_time': 264477.57737093663}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264477.57344008534, '#receive_time': 264478.56232734263}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264478.55852395034, '#receive_time': 264479.5465422996}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264479.54279060534, '#receive_time': 264480.53080958966}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264480.5269678794, '#receive_time': 264481.5152068546}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264481.51139652636, '#receive_time': 264482.49971860566}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264482.49602205335, '#receive_time': 264483.48403081263}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264483.4802395314, '#receive_time': 264484.46818281565}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264484.46436960634, '#receive_time': 264485.45277876663}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264485.4490018334, '#receive_time': 264486.43686371465}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264486.43320724636, '#receive_time': 264487.42189969565}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264487.41809306334, '#receive_time': 264488.40633258666}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264488.40237172134, '#receive_time': 264489.39057031664}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264489.3867349084, '#receive_time': 264490.3747524166}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264490.3709745554, '#receive_time': 264491.35914052563}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264491.35533036536, '#receive_time': 264492.3432832076}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264492.3395678794, '#receive_time': 264493.32783746364}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264493.32407089433, '#receive_time': 264494.31207298866}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264494.30822691735, '#receive_time': 264495.2964178656}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264495.29248260637, '#receive_time': 264496.28116618365}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264496.27731289435, '#receive_time': 264497.2654079066}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264497.26154289936, '#receive_time': 264498.24966370966}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264498.24596226035, '#receive_time': 264499.23416678363}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264499.23028789833, '#receive_time': 264500.2190654376}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264500.2151969764, '#receive_time': 264501.20343319065}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264501.19958367833, '#receive_time': 264502.1883173196}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264502.1847185934, '#receive_time': 264503.1727772416}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264503.1689798044, '#receive_time': 264504.15743014065}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264504.15353521134, '#receive_time': 264505.14168661466}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264505.13785117737, '#receive_time': 264506.12614531466}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264506.12220796035, '#receive_time': 264507.11040656164}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264507.10655665636, '#receive_time': 264508.09480716364}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264508.09094459336, '#receive_time': 264509.0790334956}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264509.07521950535, '#receive_time': 264510.0639625606}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264510.06011387537, '#receive_time': 264511.0482100956}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264511.0443958904, '#receive_time': 264512.03271776566}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264512.0289719914, '#receive_time': 264513.0173357406}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264513.01355176937, '#receive_time': 264514.00190919964}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264513.9980650474, '#receive_time': 264514.98688032164}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264514.9831012554, '#receive_time': 264515.9713904496}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264515.96757507336, '#receive_time': 264516.95570573764}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264516.95185266837, '#receive_time': 264517.9400737616}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264517.9362157694, '#receive_time': 264518.92427379964}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264518.9204531814, '#receive_time': 264519.90891011665}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264519.90509779035, '#receive_time': 264520.89325173665}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264520.88942298834, '#receive_time': 264521.87756125064}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264521.87374586536, '#receive_time': 264522.8617932776}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264522.85800125636, '#receive_time': 264523.84615586465}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264523.84232930135, '#receive_time': 264524.8305556306}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264524.82670857135, '#receive_time': 264525.81524324865}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264525.81141932437, '#receive_time': 264526.8003495606}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264526.7965798894, '#receive_time': 264527.78553299065}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264527.78174202936, '#receive_time': 264528.7705754946}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264528.7667884924, '#receive_time': 264529.75548257865}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264529.75172566436, '#receive_time': 264530.73986647266}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264530.73604162637, '#receive_time': 264531.7242893566}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264531.7203430334, '#receive_time': 264532.7082652106}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264532.70449932833, '#receive_time': 264533.6929410346}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264533.6891722914, '#receive_time': 264534.6773347586}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264534.6734770334, '#receive_time': 264535.6617127666}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264535.65787843836, '#receive_time': 264536.6466100576}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264536.64282740036, '#receive_time': 264537.63167077163}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264537.6278767544, '#receive_time': 264538.61639069964}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264538.6125990414, '#receive_time': 264539.60019869363}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264539.59661982337, '#receive_time': 264540.5846262386}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264540.5808501994, '#receive_time': 264541.56898060965}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264541.56523436535, '#receive_time': 264542.55396290065}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264542.55030088336, '#receive_time': 264543.53836568363}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264543.53456897434, '#receive_time': 264544.52343306266}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264544.51950908534, '#receive_time': 264545.5075389036}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264545.50374379935, '#receive_time': 264546.49190638564}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264546.4881570464, '#receive_time': 264547.4762103906}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264547.47244665737, '#receive_time': 264548.46060297365}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264548.4568370344, '#receive_time': 264549.44502096466}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264549.44117699534, '#receive_time': 264550.4299157076}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264550.42611718137, '#receive_time': 264551.41431355465}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264551.41041764634, '#receive_time': 264552.39877327567}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264552.39488305437, '#receive_time': 264553.3836028996}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264553.3796354104, '#receive_time': 264554.36812404066}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264554.36424362136, '#receive_time': 264555.35236797464}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264555.34858514334, '#receive_time': 264556.33685478364}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264556.3328308944, '#receive_time': 264557.3209619136}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264557.3171245964, '#receive_time': 264558.30563139165}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264558.30171067535, '#receive_time': 264559.28974345163}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264559.28595310537, '#receive_time': 264560.27415199665}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264560.27045377233, '#receive_time': 264561.2587662116}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264561.25481155235, '#receive_time': 264562.24353799666}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264562.2398505044, '#receive_time': 264563.2279178256}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264563.22415397735, '#receive_time': 264564.2124256456}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264564.20861988334, '#receive_time': 264565.1969478906}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264565.1929001114, '#receive_time': 264566.18169527664}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264566.17790681036, '#receive_time': 264567.16613170266}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264567.16227191733, '#receive_time': 264568.15050049365}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264568.14666809235, '#receive_time': 264569.1357505656}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264569.13179437834, '#receive_time': 264570.12009874766}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264570.11632475536, '#receive_time': 264571.1043719226}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264571.10059460334, '#receive_time': 264572.0888435756}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264572.08498107735, '#receive_time': 264573.0739943776}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264573.07014815236, '#receive_time': 264574.05834891764}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264574.05443253537, '#receive_time': 264575.04247545864}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264575.0386787464, '#receive_time': 264576.0268250486}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264576.02293146134, '#receive_time': 264577.01136501867}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264577.00755842234, '#receive_time': 264577.9957353146}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264577.9918129974, '#receive_time': 264578.98016288265}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264578.97627797734, '#receive_time': 264579.9648319046}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264579.96096419834, '#receive_time': 264580.9491274696}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264580.9453066484, '#receive_time': 264581.9344286096}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264581.93053539534, '#receive_time': 264582.9186157666}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264582.91484505736, '#receive_time': 264583.9037219716}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264583.89993855736, '#receive_time': 264584.88842021464}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264584.8846712264, '#receive_time': 264585.8724832296}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264585.8688331544, '#receive_time': 264586.85723479267}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264586.85341035435, '#receive_time': 264587.8416190756}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264587.83776576235, '#receive_time': 264588.82589490263}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264588.8220940034, '#receive_time': 264589.81021685764}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264589.80644345534, '#receive_time': 264590.79458368465}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264590.79079546937, '#receive_time': 264591.7789312516}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264591.77513097133, '#receive_time': 264592.76361655764}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264592.7597448014, '#receive_time': 264593.7478906256}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264593.74407714035, '#receive_time': 264594.73263060267}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264594.7287210824, '#receive_time': 264595.71683205466}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264595.71287528134, '#receive_time': 264596.70169477566}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264596.69787889236, '#receive_time': 264597.6859743986}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264597.68215822836, '#receive_time': 264598.67033110966}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264598.66657569836, '#receive_time': 264599.65557785763}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264599.65159945335, '#receive_time': 264600.63976725866}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264600.63593562733, '#receive_time': 264601.62407216866}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264601.62025215937, '#receive_time': 264602.60843334766}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264602.6046691224, '#receive_time': 264603.59293927264}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264603.5890261204, '#receive_time': 264604.57772151066}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264604.57392682234, '#receive_time': 264605.5624550206}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264605.55866725935, '#receive_time': 264606.54731540364}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264606.54352188937, '#receive_time': 264607.53253845364}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264607.5287684264, '#receive_time': 264608.51700984366}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264608.51317607536, '#receive_time': 264609.50130672567}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264609.49746588233, '#receive_time': 264610.4862485696}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264610.48245752434, '#receive_time': 264611.4706379866}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264611.4668029554, '#receive_time': 264612.45482920966}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264612.45106092136, '#receive_time': 264613.43915957963}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264613.43529528135, '#receive_time': 264614.42344565166}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264614.41960676736, '#receive_time': 264615.40769135166}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264615.4038892434, '#receive_time': 264616.39291437465}
mcu 'mcu': got {'#name': 'get_clock', '#sent_time': 264616.3889717744, '#receive_time': 264617.37787574966}
Resetting prediction variance 264623.281: freq=63999014 diff=-10726012282 stddev=4713.327
Resetting prediction variance 264624.265: freq=32252633 diff=-3418033126 stddev=64000.000
Resetting prediction variance 264625.250: freq=26097155 diff=-1964058045 stddev=64000.000
Resetting prediction variance 264626.234: freq=23530885 diff=-1331297795 stddev=64000.000
Resetting prediction variance 264627.218: freq=22155873 diff=-971226841 stddev=64000.000
Resetting prediction variance 264628.203: freq=21321540 diff=-735038252 stddev=64000.000
Resetting prediction variance 264629.187: freq=20778322 diff=-565630987 stddev=64000.000
Resetting prediction variance 264630.172: freq=20409949 diff=-436398485 stddev=64000.000
Resetting prediction variance 264631.157: freq=20154946 diff=-333287614 stddev=64000.000
Resetting prediction variance 264632.142: freq=19977746 diff=-248184928 stddev=64000.000
Resetting prediction variance 264633.126: freq=19856333 diff=-176042353 stddev=64000.000
Resetting prediction variance 264634.111: freq=19776364 diff=-113564292 stddev=64000.000
Resetting prediction variance 264635.095: freq=19728094 diff=-58524232 stddev=64000.000
Resetting prediction variance 264636.079: freq=19704668 diff=-9354201 stddev=64000.000
Resetting prediction variance 264637.064: freq=19701122 diff=35104514 stddev=64000.000
Resetting prediction variance 264638.048: freq=19713784 diff=75668699 stddev=64000.000
Resetting prediction variance 264639.032: freq=19739867 diff=112999722 stddev=64000.000
Resetting prediction variance 264640.017: freq=19777226 diff=147603120 stddev=64000.000
Resetting prediction variance 264641.002: freq=19824189 diff=179846389 stddev=64000.000
Resetting prediction variance 264641.986: freq=19879421 diff=210015346 stddev=64000.000
Resetting prediction variance 264642.971: freq=19941843 diff=238397885 stddev=64000.000
Resetting prediction variance 264643.955: freq=20010591 diff=265179876 stddev=64000.000
Resetting prediction variance 264644.940: freq=20084949 diff=290534350 stddev=64000.000
Resetting prediction variance 264645.924: freq=20164329 diff=314617383 stddev=64000.000
Resetting prediction variance 264646.909: freq=20248244 diff=337514406 stddev=64000.000
Resetting prediction variance 264647.893: freq=20336278 diff=359345450 stddev=64000.000
Resetting prediction variance 264648.877: freq=20428085 diff=380179910 stddev=64000.000
Resetting prediction variance 264649.862: freq=20523367 diff=400105292 stddev=64000.000
Resetting prediction variance 264650.846: freq=20621876 diff=419186348 stddev=64000.000
Resetting prediction variance 264651.831: freq=20723397 diff=437495226 stddev=64000.000
Resetting prediction variance 264652.815: freq=20827753 diff=455022902 stddev=64000.000
Resetting prediction variance 264653.800: freq=20934775 diff=471874689 stddev=64000.000
Resetting prediction variance 264654.784: freq=21044336 diff=488043960 stddev=64000.000
Resetting prediction variance 264655.769: freq=21156312 diff=503593701 stddev=64000.000
Resetting prediction variance 264656.753: freq=21270607 diff=518523682 stddev=64000.000
Resetting prediction variance 264657.737: freq=21387126 diff=532891140 stddev=64000.000
Resetting prediction variance 264658.722: freq=21505800 diff=546721916 stddev=64000.000
Resetting prediction variance 264659.706: freq=21626565 diff=560021029 stddev=64000.000
Resetting prediction variance 264660.691: freq=21749366 diff=572826503 stddev=64000.000
Resetting prediction variance 264661.676: freq=21874160 diff=585136988 stddev=64000.000
Resetting prediction variance 264662.661: freq=22000904 diff=596956455 stddev=64000.000
Resetting prediction variance 264663.645: freq=22129561 diff=608316473 stddev=64000.000
Resetting prediction variance 264664.630: freq=22260103 diff=619260028 stddev=64000.000
Resetting prediction variance 264665.615: freq=22392513 diff=629773919 stddev=64000.000
Resetting prediction variance 264666.599: freq=22526773 diff=639856996 stddev=64000.000
Resetting prediction variance 264667.583: freq=22662868 diff=649528465 stddev=64000.000
Resetting prediction variance 264668.568: freq=22800784 diff=658806191 stddev=64000.000
Resetting prediction variance 264669.552: freq=22940516 diff=667714402 stddev=64000.000
Resetting prediction variance 264670.536: freq=23082065 diff=676245615 stddev=64000.000
Resetting prediction variance 264671.522: freq=23225429 diff=684445690 stddev=64000.000
Resetting prediction variance 264672.507: freq=23370620 diff=692278583 stddev=64000.000
Resetting prediction variance 264673.491: freq=23517641 diff=699761784 stddev=64000.000
Resetting prediction variance 264674.476: freq=23666497 diff=706913388 stddev=64000.000
Resetting prediction variance 264675.461: freq=23817201 diff=713720069 stddev=64000.000
Resetting prediction variance 264676.445: freq=23969760 diff=720177835 stddev=64000.000
Resetting prediction variance 264677.430: freq=24124182 diff=726349899 stddev=64000.000
Resetting prediction variance 264678.414: freq=24280491 diff=732175102 stddev=64000.000
Resetting prediction variance 264679.399: freq=24438692 diff=737715258 stddev=64000.000
Resetting prediction variance 264680.383: freq=24598809 diff=742937826 stddev=64000.000
Resetting prediction variance 264681.368: freq=24760856 diff=747884642 stddev=64000.000
Resetting prediction variance 264682.352: freq=24924858 diff=752535359 stddev=64000.000
Resetting prediction variance 264683.337: freq=25090833 diff=756898576 stddev=64000.000
Resetting prediction variance 264684.321: freq=25258804 diff=760981592 stddev=64000.000
Resetting prediction variance 264685.305: freq=25428791 diff=764807155 stddev=64000.000
Attempting MCU 'mcu' reset command
webhooks client 139676229186416: Disconnected
Restarting printer
Start printer at Sat Aug 12 00:10:55 2023 (1691799055.4 264687.1)
===== Config file =====
[force_move]
enable_force_move = true

[virtual_sdcard]
path = /home/tech/printer_data/gcodes

[exclude_object]

[pause_resume]

[display_status]

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[gcode_macro _globals]
variable_filament_sensor_enabled = 1
variable_beeping_enabled = 0
variable_bed_temp_over = 10
variable_kamp_enable = 0
variable_pre_purge_prime_length = 1.40
gcode = 

[gcode_macro CONDITIONAL_BEEP]
gcode = 
	
	{% set i = params.I|default(1)|int %}
	{% set dur = params.DUR|default(100)|int %}
	{% set freq = params.FREQ|default(2000)|int %}
	
	{% set BEEPING_ENABLED=printer["gcode_macro _globals"].beeping_enabled|default(-1)|int %}
	
	{% if BEEPING_ENABLED == 1 %}
	BEEP I={i} DUR={dur} FREQ={freq}
	{% endif %}

[gcode_macro ADJUST_FILAMENT_SENSOR_STATUS]
gcode = 
	
	{% set NEWSTATUS = params.ENABLE|default(-1)|int %}
	
	{% set FILAMENT_SENSOR_ENABLED=printer["gcode_macro _globals"].filament_sensor_enabled|default(-1)|int %}
	
	{% if FILAMENT_SENSOR_ENABLED == 1 and NEWSTATUS != -1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	
	{% set s = params.S|float %}
	
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	
	{% set s = params.S|float %}
	
	M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}
	{% endif %}

[gcode_macro PURGE_LINE]
gcode = 
	{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	
	{% set extrudeAmount = 26.6 %}
	{% set movementLength = 100.0 %}
	{% set movementSpeed = 15 * 60 %}
	{% set xStart = 0.5 %}
	{% set yStart = 0.5 %}
	
	
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
	
	G92 E0.0
	G90
	G0 X{xStart} Y{yStart} F{maxVelocityAdjusted}
	G1 Z0.4 F500.0
	M83
	G1 E{PRE_PURGE_PRIME_LENGTH} F500
	G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed}
	
	G92 E0.0
	M82
	G1 Z5.0

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT

[gcode_macro PRINT_START]
gcode = 
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	{% set bedtemp = params.BED|int %}
	{% set hotendtemp = params.HOTEND|int %}
	{% set chambertemp = params.CHAMBER|default(0)|int %}
	
	
	{% set bedtempSlicer = bedtemp %}
	{% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set maxVelocityAdjusted =  (0.90 * maxVelocity * 60)|int %}
	{% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
	
	{% if printer.configfile.settings.safe_z_home %}
	{% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
	{% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
	{% endif %}
	
	{% set bedtempAlmost = ((bedtemp - 2, 0, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
	{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
	{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
	
	
	{% if bedtempAlmost > bedtemp %}
	{% if (bedtempAlmost - bedtempOver) <= bedtemp %}
	{% set bedtemp = bedtempAlmost %}
	{% endif %}
	{% endif %}
	
	G90
	M140 S{bedtempAlmost}
	M104 S{hotendtempStepOne}
	G28 X Y
	{% if printer.configfile.settings.safe_z_home %}
	G1 X{startX} Y{startY} F{maxVelocityAdjusted}
	{% endif %}
	
	M190 S{bedtempAlmost}
	{% if kampEnabled == 0 %}
	M104 S{hotendtempStepTwo}
	{% endif %}
	M190 S{bedtemp}
	M140 S{bedtempSlicer}
	
	{% if kampEnabled == 0 %}
	BED_MESH_PROFILE LOAD=default
	M104 S{hotendtemp}
	G28 Z
	{% else %}
	G28 Z
	BED_MESH_CALIBRATE
	M104 S{hotendtemp}
	{% endif %}
	
	G1 X0 Y0 F{maxVelocityAdjusted}
	M109 S{hotendtemp}
	
	G1 Z20 F3000

[gcode_macro PRINT_END]
gcode = 
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
	CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500
	{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
	
	M400
	G92 E0
	G1 E-{PRE_PURGE_PRIME_LENGTH} F400
	G91
	
	
	{% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set zVelocityAdjusted =  (0.95 * zVelocity * 60)|int  %}
	{% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
	
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
	
	
	{% if printer.toolhead.position.x < (max_x - 20) %}
	{% set x_safe = 20.0 %}
	{% else %}
	{% set x_safe = -20.0 %}
	{% endif %}
	
	{% if printer.toolhead.position.y < (max_y - 20) %}
	{% set y_safe = 20.0 %}
	{% else %}
	{% set y_safe = -20.0 %}
	{% endif %}
	
	{% set lift_height = 25.0 %}
	{% if printer.toolhead.position.z < (max_z - lift_height) %}
	{% set z_safe = lift_height %}
	{% else %}
	{% set z_safe = max_z - printer.toolhead.position.z %}
	{% endif %}
	
	G0 Z{z_safe} F{zVelocityAdjusted}
	G0 X{x_safe} Y{y_safe} F{maxVelocityAdjusted}
	TURN_OFF_HEATERS
	M107
	G90
	G0 X60 Y{max_y} F3600

[gcode_macro LOAD_FILAMENT]
gcode = 
	M83
	G1 E30 F300
	G1 E15 F150
	M82

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	M83
	G1 E10 F300
	G1 E-40 F1800
	M82

[gcode_macro M600]
gcode = 
	CONDITIONAL_BEEP i=1 dur=300
	CONDITIONAL_BEEP i=1 dur=100
	CONDITIONAL_BEEP i=1 dur=100
	PAUSE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
	
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro _CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro BEEP]
description = BEEP I=3 DUR=200 FREQ=2000: Beep 3 times, for 200ms each, at 2kHz frequency.
gcode = 
	
	{% set i = params.I|default(1)|int %}
	{% set dur = params.DUR|default(100)|int %}
	{% set freq = params.FREQ|default(2000)|int %}
	
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKREAR
	G90
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKBED
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro MECHANICAL_GANTRY_CALIBRATION]
gcode = 
	
	{% set my_current = params.CURRENT|default(0.20)|float %}
	
	{% set oldcurrent = printer.configfile.settings["tmc2209 stepper_z"].run_current %}
	{% set oldhold = printer.configfile.settings["tmc2209 stepper_z"].hold_current %}
	{% set x_max = printer.toolhead.axis_maximum.x %}
	{% set y_max = printer.toolhead.axis_maximum.y %}
	{% set z_max = printer.toolhead.axis_maximum.z %}
	{% set fast_move_z = printer.configfile.settings["printer"].max_z_velocity %}
	{% set fast_move = printer.configfile.settings["printer"].max_velocity %}
	M117 {printer.homed_axes}
	{% if printer.homed_axes != 'xyz' %}
	G28
	{% endif %}
	G90
	G0 X{x_max / 2} Y{y_max / 2} F{fast_move * 30 }
	
	G0 Z{z_max -5} F{fast_move_z * 60 }
	
	SET_TMC_CURRENT STEPPER=stepper_z CURRENT={my_current}
	
	{% if printer.configfile.settings["stepper_z1"] %}
	SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current}
	{% endif %}
	
	
	G4 P200
	
	SET_KINEMATIC_POSITION Z={z_max - 25}
	
	G1 Z{z_max} F{6 * 60}
	
	G4 P10000
	G1 Z{z_max -6} F{6 * 60}
	
	G4 P200
	
	SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold}
	
	{% if printer.configfile.settings["stepper_z1"] %}
	SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={oldcurrent} HOLDCURRENT={oldhold}
	{% endif %}
	
	G1 Z{z_max -30} F{6 * 60}
	
	G4 P200
	G28 Z

[gcode_macro G34]
gcode = 
	MECHANICAL_GANTRY_CALIBRATION

[gcode_macro PID_TEST_BED]
gcode = 
	
	{% set TARGETTEMP = params.TEMP|default(70)|int %}
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	G28
	G90
	G1 X{max_x/2} Y{max_y/2} Z40 F6000
	PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}

[gcode_macro PID_TEST_HOTEND]
gcode = 
	
	{% set TARGETTEMP = params.TEMP|default(245)|int %}
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	G28
	G90
	G1 X{max_x/2} Y{max_y/2} Z10 F6000
	M106 S64
	PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}

[gcode_macro PID_TEST_ALL]
gcode = 
	PID_TEST_BED
	PID_TEST_HOTEND
	SAVE_CONFIG

[gcode_macro DO_PROBE_CALIBRATE]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	PROBE_CALIBRATE

[gcode_macro DO_AXIS_TWIST_CALIBRATION]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	AXIS_TWIST_COMPENSATION_CALIBRATE

[gcode_macro DO_SAVE_CONFIG]
gcode = 
	SAVE_CONFIG

[gcode_macro DO_CREATE_MESH]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	_BED_MESH_CALIBRATE

[gcode_macro ENABLE_MOTORS]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
	SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
	SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x, min_points]|max %}
	{% set points_y = [points_y, min_points]|max %}
	{% set points_x = [points_x, probe_count[0]]|min %}
	{% set points_y = [points_y, probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro TEST_SPEED]
gcode = 
	
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	
	{% set iterations = params.ITERATIONS|default(5)|int %}
	
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	
	{% set bound = params.BOUND|default(20)|int %}
	
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	
	
	
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	
	
	
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	
	
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	
	
	SAVE_GCODE_STATE NAME=TEST_SPEED
	
	
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	
	
	M400
	G28
	
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	
	G90
	G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
	M400
	G28 X Y
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	
	
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	
	{% for i in range(iterations) %}
	
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	
	
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	
	
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	
	
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	
	
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	
	
	M400
	G28
	
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[mcu]
serial = /dev/pts/2
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 200
max_accel = 3000
max_z_velocity = 15
max_z_accel = 45
square_corner_velocity = 8.0

[stepper_x]
step_pin = PB13
dir_pin = PB12
enable_pin = !PB14
microsteps = 128
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 40
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 0
driver_sgthrs = 86
diag_pin = PC0

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 128
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 40
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 2
driver_sgthrs = 81
diag_pin = PC1

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 128
rotation_distance = 4
endstop_pin = probe:z_virtual_endstop
position_min = -4
position_max = 340
homing_speed = 5

[tmc2209 stepper_z]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 1

[extruder]
step_pin = PB3
dir_pin = PB4
enable_pin = !PD1
microsteps = 128
rotation_distance = 4.65
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 300
max_extrude_only_distance = 150.0
control = pid
pid_kp = 25.397
pid_ki = 1.992
pid_kd = 80.954

[tmc2209 extruder]
uart_pin = PC11
tx_pin = PC10
run_current = 0.550
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 3

[heater_bed]
heater_pin = PC9
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 110
control = pid
pid_kp = 73.292
pid_ki = 1.086
pid_kd = 1236.800

[probe]
pin = PC14
x_offset = 27
y_offset = -20
samples = 3
samples_result = median
samples_tolerance = 0.01
samples_tolerance_retries = 5
z_offset = 1.550

[safe_z_home]
home_xy_position = 123, 170
speed = 100.0
z_hop = 10
z_hop_speed = 15

[bed_mesh]
speed = 175
mesh_min = 30, 30
mesh_max = 270, 270
probe_count = 5,5
algorithm = bicubic
fade_start = 1
fade_end = 10
fade_target = 0

[fan]
pin = PC6

[controller_fan electronic_enclosure_fan]
pin = PC7
idle_timeout = 60
idle_speed = 0
stepper = stepper_x, stepper_y, stepper_z

[heater_fan hotend_fan]
pin = PB15
heater = extruder
heater_temp = 50.0

[output_pin beeper]
pin = PB5
value = 0
shutdown_value = 0
pwm = True
cycle_time = 0.0005

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PD6, EXP1_10=<5V>

[axis_twist_compensation]
calibrate_start_x = 27
calibrate_end_x = 280
calibrate_y = 150
z_compensations = 0.117448, -0.035990, -0.081458
compensation_start_x = 27.0
compensation_end_x = 280.0

[bed_mesh default]
version = 1
points = 
	-0.208910, -0.126374, -0.144933, -0.196749, -0.302378
	-0.057504, -0.027156, -0.051808, -0.131593, -0.236440
	-0.010472, 0.019251, -0.030401, -0.110187, -0.239097
	-0.051566, -0.029031, -0.072276, -0.170031, -0.295503
	-0.170941, -0.080124, -0.113839, -0.225656, -0.404409
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 30.0
max_x = 270.0
min_y = 30.0
max_y = 270.0
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 139676230809008: New connection
webhooks client 139676230809008: Client info {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:10.3-2021.07-4) 10.3.1 20210621 (release) binutils: (2.38-3ubuntu1+15build1) 2.38)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PF0,PF1 RESERVE_PINS_serial=PA3,PA2 SERIAL_BAUD=115200 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (3.0, 50.0)     | (30.0, 30.0)
  1   | (63.0, 50.0)    | (90.0, 30.0)
  2   | (123.0, 50.0)   | (150.0, 30.0)
  3   | (183.0, 50.0)   | (210.0, 30.0)
  4   | (243.0, 50.0)   | (270.0, 30.0)
  5   | (243.0, 110.0)  | (270.0, 90.0)
  6   | (183.0, 110.0)  | (210.0, 90.0)
  7   | (123.0, 110.0)  | (150.0, 90.0)
  8   | (63.0, 110.0)   | (90.0, 90.0)
  9   | (3.0, 110.0)    | (30.0, 90.0)
  10  | (3.0, 170.0)    | (30.0, 150.0)
  11  | (63.0, 170.0)   | (90.0, 150.0)
  12  | (123.0, 170.0)  | (150.0, 150.0)
  13  | (183.0, 170.0)  | (210.0, 150.0)
  14  | (243.0, 170.0)  | (270.0, 150.0)
  15  | (243.0, 230.0)  | (270.0, 210.0)
  16  | (183.0, 230.0)  | (210.0, 210.0)
  17  | (123.0, 230.0)  | (150.0, 210.0)
  18  | (63.0, 230.0)   | (90.0, 210.0)
  19  | (3.0, 230.0)    | (30.0, 210.0)
  20  | (3.0, 290.0)    | (30.0, 270.0)
  21  | (63.0, 290.0)   | (90.0, 270.0)
  22  | (123.0, 290.0)  | (150.0, 270.0)
  23  | (183.0, 290.0)  | (210.0, 270.0)
  24  | (243.0, 290.0)  | (270.0, 270.0)
Starting heater checks for extruder
Write g-code response
Traceback (most recent call last):
  File "/home/tech/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
BlockingIOError: [Errno 11] Resource temporarily unavailable
Stats 264689.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2243 bytes_read=5509 bytes_retransmit=0 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64003633  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.00 cputime=883.615 memavail=3468540 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 139676230809008
webhooks: registering remote method 'reboot_machine' for connection id: 139676230809008
webhooks: registering remote method 'pause_job_queue' for connection id: 139676230809008
webhooks: registering remote method 'start_job_queue' for connection id: 139676230809008
Stats 264690.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2249 bytes_read=5570 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000799  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.623 memavail=3468568 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.0 pwm=0.000
Unknown command:"SET_FILAMENT_SENSOR"
Stats 264691.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2255 bytes_read=5706 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000058  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.631 memavail=3468832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.2 pwm=0.000
Stats 264692.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2261 bytes_read=5812 bytes_retransmit=0 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999793  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.635 memavail=3468832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.3 pwm=0.000
Stats 264693.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2267 bytes_read=5933 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999672  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.639 memavail=3468832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=35.9 pwm=0.000
Stats 264694.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2273 bytes_read=6054 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999762  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.644 memavail=3468832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.1 pwm=0.000
Stats 264695.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2279 bytes_read=6160 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999733  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.00 cputime=883.648 memavail=3468832 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=36.0 pwm=0.000
Heater extruder approaching new target of 100.000
Stats 264696.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2307 bytes_read=6315 bytes_retransmit=0 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999464  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.653 memavail=3468832 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=36.1 pwm=1.000
Stats 264697.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2338 bytes_read=6441 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999389  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.00 cputime=883.658 memavail=3468832 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=36.2 pwm=1.000
Stats 264698.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2344 bytes_read=6547 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999329  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.662 memavail=3468824 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=36.4 pwm=1.000
Stats 264699.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2350 bytes_read=6668 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999296  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.666 memavail=3468600 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=37.3 pwm=1.000
Stats 264700.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2372 bytes_read=6794 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999258  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.671 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=39.8 pwm=1.000
Stats 264701.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2378 bytes_read=6913 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999262  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.675 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=42.2 pwm=1.000
Stats 264702.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2384 bytes_read=7034 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999266  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.00 cputime=883.680 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=45.0 pwm=1.000
Stats 264703.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2390 bytes_read=7155 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999297  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.00 cputime=883.684 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=49.0 pwm=1.000
Stats 264704.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2407 bytes_read=7261 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999280  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.688 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=52.0 pwm=1.000
Stats 264705.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2413 bytes_read=7382 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999256  heater_bed: target=0 temp=38.0 pwm=0.000 sysload=0.00 cputime=883.693 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=55.2 pwm=1.000
Stats 264706.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2419 bytes_read=7516 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999244  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.697 memavail=3468604 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=59.5 pwm=1.000
Stats 264707.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2425 bytes_read=7622 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999246  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.00 cputime=883.701 memavail=3469012 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=62.7 pwm=1.000
Stats 264708.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2431 bytes_read=7743 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999245  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.706 memavail=3469012 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=65.9 pwm=1.000
Stats 264709.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2453 bytes_read=7869 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999235  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.710 memavail=3469012 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=70.1 pwm=1.000
Stats 264710.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2459 bytes_read=7975 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999210  heater_bed: target=0 temp=37.8 pwm=0.000 sysload=0.00 cputime=883.715 memavail=3469020 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=73.1 pwm=1.000
Stats 264711.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2465 bytes_read=8109 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999173  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.719 memavail=3469024 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=76.2 pwm=1.000
Stats 264712.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2487 bytes_read=8235 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999191  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.724 memavail=3469024 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=80.3 pwm=0.922
Stats 264713.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2525 bytes_read=8351 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999206  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.728 memavail=3469024 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=83.3 pwm=0.754
Stats 264714.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2547 bytes_read=8477 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999205  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.733 memavail=3469024 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=86.0 pwm=0.696
Stats 264715.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2585 bytes_read=8608 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999202  heater_bed: target=0 temp=37.9 pwm=0.000 sysload=0.00 cputime=883.738 memavail=3469024 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=88.9 pwm=0.718
Stats 264716.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=2623 bytes_read=8738 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999200  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.742 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=90.2 pwm=0.876
Stats 264717.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=2645 bytes_read=8864 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.747 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=90.9 pwm=0.954
Stats 264718.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=2651 bytes_read=8985 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999188  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.751 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=91.4 pwm=0.954
Stats 264719.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=2657 bytes_read=9091 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999193  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.755 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=91.4 pwm=0.954
Stats 264720.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=2663 bytes_read=9212 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999197  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.760 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=91.3 pwm=0.954
Stats 264721.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2685 bytes_read=9351 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.764 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=90.9 pwm=1.000
Stats 264722.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2691 bytes_read=9457 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999191  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.769 memavail=3469028 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=90.6 pwm=1.000
Stats 264723.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2697 bytes_read=9578 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999188  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.773 memavail=3469032 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=90.2 pwm=1.000
Stats 264724.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2703 bytes_read=9699 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999183  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.777 memavail=3469032 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=89.6 pwm=1.000
Stats 264725.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2720 bytes_read=9805 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999179  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.782 memavail=3469032 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=89.2 pwm=1.000
Stats 264726.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2726 bytes_read=9939 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999178  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.786 memavail=3469036 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=88.7 pwm=1.000
Stats 264727.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2732 bytes_read=10060 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999182  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.790 memavail=3469036 print_time=9.972 buffer_time=0.000 print_stall=0 extruder: target=100 temp=88.1 pwm=1.000
Stats 264728.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2738 bytes_read=10166 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999182  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.795 memavail=3469036 print_time=42.532 buffer_time=0.044 print_stall=0 extruder: target=200 temp=87.8 pwm=1.000
Stats 264729.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2760 bytes_read=10292 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999181  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.00 cputime=883.800 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=87.2 pwm=1.000
Stats 264730.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2766 bytes_read=10413 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999183  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.804 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=86.6 pwm=1.000
Stats 264731.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=2772 bytes_read=10519 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999166  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.00 cputime=883.808 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=86.1 pwm=1.000
Stats 264732.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2778 bytes_read=10653 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999226  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.00 cputime=883.812 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=85.7 pwm=1.000
Stats 264733.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2800 bytes_read=10779 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999228  heater_bed: target=0 temp=37.6 pwm=0.000 sysload=0.00 cputime=883.817 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=85.2 pwm=1.000
Stats 264734.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2806 bytes_read=10885 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999227  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.821 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=84.8 pwm=1.000
Stats 264735.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2812 bytes_read=11006 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999218  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.826 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=84.4 pwm=1.000
Stats 264736.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2818 bytes_read=11127 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=37.7 pwm=0.000 sysload=0.00 cputime=883.830 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.8 pwm=1.000
Heater extruder no longer approaching target 200.000
Stats 264737.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2824 bytes_read=11246 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999212  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.835 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.4 pwm=1.000
Heater extruder not heating at expected rate
Transition to shutdown state: Heater extruder not heating at expected rate
See the 'verify_heater' section in docs/Config_Reference.md
for the parameters that control this check.

Dumping gcode input 0 blocks
Dumping 20 requests for client 139676230809008
Received 264689.663177: b'{"id": 140298808821840, "method": "gcode/subscribe_output", "params": {"response_template": {"method": "process_gcode_response"}}}'
Received 264689.663563: b'{"id": 140298808821840, "method": "list_endpoints", "params": {}}'
Received 264689.664018: b'{"id": 140298807689280, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 264689.914867: b'{"id": 140298808835760, "method": "objects/list", "params": {}}'
Received 264689.915391: b'{"id": 140298836632688, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 264690.166725: b'{"id": 140298808820112, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 264690.167231: b'{"id": 140298808820112, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 264690.167658: b'{"id": 140298808820112, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 264690.168082: b'{"id": 140298808820112, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 264690.169022: b'{"id": 140298807689760, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 264690.169205: b'{"id": 140298807689616, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 264690.173072: b'{"id": 140298807690768, "method": "info", "params": {}}'
Received 264690.173072: b'{"id": 140298807691248, "method": "objects/list", "params": {}}'
Received 264690.173072: b'{"id": 140298807691728, "method": "gcode/help", "params": {}}'
Received 264690.191014: b'{"id": 140298807689856, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "configfile": null, "mcu": null, "gcode_move": null, "print_stats": null, "virtual_sdcard": null, "exclude_object": null, "pause_resume": null, "display_status": null, "gcode_macro _globals": null, "gcode_macro CONDITIONAL_BEEP": null, "gcode_macro ADJUST_FILAMENT_SENSOR_STATUS": null, "gcode_macro M109": null, "gcode_macro M190": null, "gcode_macro PURGE_LINE": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro _CG28": null, "gcode_macro BEEP": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro MECHANICAL_GANTRY_CALIBRATION": null, "gcode_macro G34": null, "gcode_macro PID_TEST_BED": null, "gcode_macro PID_TEST_HOTEND": null, "gcode_macro PID_TEST_ALL": null, "gcode_macro DO_PROBE_CALIBRATE": null, "gcode_macro DO_AXIS_TWIST_CALIBRATION": null, "gcode_macro DO_SAVE_CONFIG": null, "gcode_macro DO_CREATE_MESH": null, "gcode_macro ENABLE_MOTORS": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro _KAMP_Settings": null, "gcode_macro TEST_SPEED": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 extruder": null, "heaters": null, "heater_bed": null, "probe": null, "bed_mesh": null, "fan": null, "controller_fan electronic_enclosure_fan": null, "heater_fan hotend_fan": null, "output_pin beeper": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 264690.418716: b'{"id": 140298808835760, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "gcode_move": null, "virtual_sdcard": null, "exclude_object": null, "pause_resume": null, "display_status": null, "gcode_macro _globals": null, "gcode_macro CONDITIONAL_BEEP": null, "gcode_macro ADJUST_FILAMENT_SENSOR_STATUS": null, "gcode_macro M109": null, "gcode_macro M190": null, "gcode_macro PURGE_LINE": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro _CG28": null, "gcode_macro BEEP": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro MECHANICAL_GANTRY_CALIBRATION": null, "gcode_macro G34": null, "gcode_macro PID_TEST_BED": null, "gcode_macro PID_TEST_HOTEND": null, "gcode_macro PID_TEST_ALL": null, "gcode_macro DO_PROBE_CALIBRATE": null, "gcode_macro DO_AXIS_TWIST_CALIBRATION": null, "gcode_macro DO_SAVE_CONFIG": null, "gcode_macro DO_CREATE_MESH": null, "gcode_macro ENABLE_MOTORS": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro _KAMP_Settings": null, "gcode_macro TEST_SPEED": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 extruder": null, "heaters": null, "probe": null, "bed_mesh": null, "fan": null, "controller_fan electronic_enclosure_fan": null, "heater_fan hotend_fan": null, "output_pin beeper": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 264690.669455: b'{"id": 140298808821696, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null, "configfile": null, "mcu": null, "gcode_move": null, "virtual_sdcard": null, "exclude_object": null, "pause_resume": null, "display_status": null, "gcode_macro _globals": null, "gcode_macro CONDITIONAL_BEEP": null, "gcode_macro ADJUST_FILAMENT_SENSOR_STATUS": null, "gcode_macro M109": null, "gcode_macro M190": null, "gcode_macro PURGE_LINE": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PRINT_START": null, "gcode_macro PRINT_END": null, "gcode_macro LOAD_FILAMENT": null, "gcode_macro UNLOAD_FILAMENT": null, "gcode_macro M600": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro _CG28": null, "gcode_macro BEEP": null, "gcode_macro PARKFRONT": null, "gcode_macro PARKFRONTLOW": null, "gcode_macro PARKREAR": null, "gcode_macro PARKCENTER": null, "gcode_macro PARKBED": null, "gcode_macro MECHANICAL_GANTRY_CALIBRATION": null, "gcode_macro G34": null, "gcode_macro PID_TEST_BED": null, "gcode_macro PID_TEST_HOTEND": null, "gcode_macro PID_TEST_ALL": null, "gcode_macro DO_PROBE_CALIBRATE": null, "gcode_macro DO_AXIS_TWIST_CALIBRATION": null, "gcode_macro DO_SAVE_CONFIG": null, "gcode_macro DO_CREATE_MESH": null, "gcode_macro ENABLE_MOTORS": null, "gcode_macro BED_MESH_CALIBRATE": null, "gcode_macro _KAMP_Settings": null, "gcode_macro TEST_SPEED": null, "stepper_enable": null, "tmc2209 stepper_x": null, "tmc2209 stepper_y": null, "tmc2209 stepper_z": null, "tmc2209 extruder": null, "heaters": null, "probe": null, "bed_mesh": null, "fan": null, "controller_fan electronic_enclosure_fan": null, "heater_fan hotend_fan": null, "output_pin beeper": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null}, "response_template": {"method": "process_status_update"}}}'
Received 264690.882237: b'{"id": 140298807035360, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 264695.842982: b'{"id": 140298807042416, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=100"}}'
Received 264728.402771: b'{"id": 140298807704160, "method": "gcode/script", "params": {"script": "SET_HEATER_TEMPERATURE HEATER=extruder TARGET=200"}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (264690.918902415, 0.0, 0.0)
MCU 'mcu' shutdown: Command request
clocksync state: mcu_freq=64000000 last_clock=3316425305 clock_est=(264714.549 1819347358 63999268.256) min_half_rtt=0.002197 min_rtt_time=264717.257 time_avg=264714.546(298.689) clock_avg=1819347358.555(19115870857.540) pred_variance=601310218.351
Dumping serial stats: bytes_write=2852 bytes_read=11384 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 264689.235427 264689.234212 14: seq: 1e, tmcuart_send oid=0 write=b'\xea\x0bH \xbf' read=10
Sent 1 264689.247974 264689.246325 19: seq: 1f, tmcuart_send oid=0 write=b'\xea\x0b\x08>\xe4\x1ar\x88\xa4\xf3' read=0
Sent 2 264689.257254 264689.256039 14: seq: 10, tmcuart_send oid=0 write=b'\xea\x0bH \xbf' read=10
Sent 3 264689.270368 264689.268719 19: seq: 11, tmcuart_send oid=0 write=b'\xea\x0b(2\x80\x00\x02\x88"\x85' read=0
Sent 4 264689.279738 264689.278523 14: seq: 12, tmcuart_send oid=0 write=b'\xea\x0bH \xbf' read=10
Sent 5 264689.292048 264689.290399 19: seq: 13, tmcuart_send oid=0 write=b'\xea\x0b\x088\x80\x00\x02\x08 \xcc' read=0
Sent 6 264689.301005 264689.299789 14: seq: 14, tmcuart_send oid=0 write=b'\xea\x0bH \xbf' read=10
Sent 7 264689.313180 264689.311965 14: seq: 15, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 8 264689.325276 264689.323627 19: seq: 16, tmcuart_send oid=0 write=b'\xea\x1b\x080\x80\x00\n\x08\xb8\xca' read=0
Sent 9 264689.334657 264689.333441 14: seq: 17, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 10 264689.346812 264689.345163 19: seq: 18, tmcuart_send oid=0 write=b'\xea\x1bh0\x80\x00\x12\x08 \x97' read=0
Sent 11 264689.356185 264689.354970 14: seq: 19, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 12 264689.368694 264689.367044 19: seq: 1a, tmcuart_send oid=0 write=b'\xea\x1b\x88\xbd\x90\x06\x02h\xaa\xd5' read=0
Sent 13 264689.378100 264689.376884 14: seq: 1b, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 14 264689.390618 264689.388968 19: seq: 1c, tmcuart_send oid=0 write=b'\xea\x1b\x082\x80\x10\xba\xe8"\xf6' read=0
Sent 15 264689.399885 264689.398670 14: seq: 1d, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 16 264689.412430 264689.410781 19: seq: 1e, tmcuart_send oid=0 write=b'\xea\x1bh2\x80\x1e\xfa\xef?\x92' read=0
Sent 17 264689.421725 264689.420510 14: seq: 1f, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 18 264689.434283 264689.432634 19: seq: 10, tmcuart_send oid=0 write=b'\xea\x1b\x08>\xe4\x1ar\x88\xa4\xc8' read=0
Sent 19 264689.443582 264689.442367 14: seq: 11, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 20 264689.456085 264689.454435 19: seq: 12, tmcuart_send oid=0 write=b'\xea\x1b(2\x80\x00\x02\x88"\xbe' read=0
Sent 21 264689.465365 264689.464150 14: seq: 13, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 22 264689.477851 264689.476202 19: seq: 14, tmcuart_send oid=0 write=b'\xea\x1b\x088\x80\x00\x02\x08 \xf7' read=0
Sent 23 264689.487099 264689.485884 14: seq: 15, tmcuart_send oid=0 write=b'\xea\x1bH\xa0\x92' read=10
Sent 24 264689.499316 264689.498708 7: seq: 16, stepper_get_position oid=3
Sent 25 264689.507221 264689.506005 14: seq: 17, tmcuart_send oid=0 write=b'\xea\x03H-\xd5' read=10
Sent 26 264689.518699 264689.518091 7: seq: 18, stepper_get_position oid=6
Sent 27 264689.526355 264689.525139 14: seq: 19, tmcuart_send oid=0 write=b'\xea\x13H\xad\xf8' read=10
Sent 28 264689.537831 264689.537224 7: seq: 1a, stepper_get_position oid=9
Sent 29 264689.545561 264689.544346 14: seq: 1b, tmcuart_send oid=0 write=b'\xea\x0bH-\x8e' read=10
Sent 30 264689.557060 264689.556452 7: seq: 1c, stepper_get_position oid=10
Sent 31 264689.564882 264689.563667 14: seq: 1d, tmcuart_send oid=0 write=b'\xea\x1bH\xad\xa3' read=10
Sent 32 264689.680182 264689.679661 6: seq: 1e, get_clock
Sent 33 264690.664955 264690.664434 6: seq: 1f, get_clock
Sent 34 264691.649472 264691.648952 6: seq: 10, get_clock
Sent 35 264692.634402 264692.633881 6: seq: 11, get_clock
Sent 36 264693.619290 264693.618769 6: seq: 12, get_clock
Sent 37 264694.604195 264694.603674 6: seq: 13, get_clock
Sent 38 264695.589098 264695.588577 6: seq: 14, get_clock
Sent 39 264696.082232 264696.080843 16: seq: 15, queue_digital_out oid=21 clock=653312000 on_ticks=6400000
Sent 40 264696.573476 264696.572955 6: seq: 16, get_clock
Sent 41 264696.684354 264696.682184 25: seq: 17, queue_digital_out oid=14 clock=682279941 on_ticks=640000, queue_digital_out oid=15 clock=682284476 on_ticks=640000
Sent 42 264697.558555 264697.558034 6: seq: 18, get_clock
Sent 43 264698.543429 264698.542908 6: seq: 19, get_clock
Sent 44 264699.528343 264699.527822 6: seq: 1a, get_clock
Sent 45 264700.282246 264700.280857 16: seq: 1b, queue_digital_out oid=21 clock=922112000 on_ticks=6400000
Sent 46 264700.513273 264700.512752 6: seq: 1c, get_clock
Sent 47 264701.497967 264701.497447 6: seq: 1d, get_clock
Sent 48 264702.482789 264702.482268 6: seq: 1e, get_clock
Sent 49 264703.467612 264703.467091 6: seq: 1f, get_clock
Sent 50 264704.453829 264704.452353 17: seq: 10, get_clock, queue_digital_out oid=21 clock=1190912000 on_ticks=6400000
Sent 51 264705.437728 264705.437207 6: seq: 11, get_clock
Sent 52 264706.422494 264706.421973 6: seq: 12, get_clock
Sent 53 264707.407404 264707.406883 6: seq: 13, get_clock
Sent 54 264708.392342 264708.391821 6: seq: 14, get_clock
Sent 55 264708.682331 264708.680942 16: seq: 15, queue_digital_out oid=21 clock=1459712000 on_ticks=6400000
Sent 56 264709.377300 264709.376779 6: seq: 16, get_clock
Sent 57 264710.362169 264710.361648 6: seq: 17, get_clock
Sent 58 264711.346894 264711.346373 6: seq: 18, get_clock
Sent 59 264712.331739 264712.331218 6: seq: 19, get_clock
Sent 60 264712.581502 264712.580113 16: seq: 1a, queue_digital_out oid=21 clock=1709312000 on_ticks=5903675
Sent 61 264713.181488 264713.180099 16: seq: 1b, queue_digital_out oid=21 clock=1747712000 on_ticks=5376694
Sent 62 264713.316681 264713.316160 6: seq: 1c, get_clock
Sent 63 264713.481469 264713.480080 16: seq: 1d, queue_digital_out oid=21 clock=1766912000 on_ticks=4827256
Sent 64 264714.081448 264714.080059 16: seq: 1e, queue_digital_out oid=21 clock=1805312000 on_ticks=4456574
Sent 65 264714.301513 264714.300992 6: seq: 1f, get_clock
Sent 66 264714.681467 264714.680079 16: seq: 10, queue_digital_out oid=21 clock=1843712000 on_ticks=4064405
Sent 67 264715.286462 264715.285941 6: seq: 11, get_clock
Sent 68 264715.581591 264715.580202 16: seq: 12, queue_digital_out oid=21 clock=1901312000 on_ticks=4592688
Sent 69 264716.181561 264716.180172 16: seq: 13, queue_digital_out oid=21 clock=1939712000 on_ticks=5155329
Sent 70 264716.271423 264716.270903 6: seq: 14, get_clock
Sent 71 264716.481455 264716.480066 16: seq: 15, queue_digital_out oid=21 clock=1958912000 on_ticks=5605515
Sent 72 264716.781543 264716.780154 16: seq: 16, queue_digital_out oid=21 clock=1978112000 on_ticks=6108536
Sent 73 264717.256686 264717.256165 6: seq: 17, get_clock
Sent 74 264718.241655 264718.241134 6: seq: 18, get_clock
Sent 75 264719.226644 264719.226124 6: seq: 19, get_clock
Sent 76 264720.211547 264720.211026 6: seq: 1a, get_clock
Sent 77 264720.981546 264720.980157 16: seq: 1b, queue_digital_out oid=21 clock=2246912000 on_ticks=6400000
Sent 78 264721.196374 264721.195853 6: seq: 1c, get_clock
Sent 79 264722.180888 264722.180367 6: seq: 1d, get_clock
Sent 80 264723.165836 264723.165316 6: seq: 1e, get_clock
Sent 81 264724.150732 264724.150211 6: seq: 1f, get_clock
Sent 82 264725.136598 264725.135122 17: seq: 10, get_clock, queue_digital_out oid=21 clock=2515712000 on_ticks=6400000
Sent 83 264726.120552 264726.120031 6: seq: 11, get_clock
Sent 84 264727.105486 264727.104965 6: seq: 12, get_clock
Sent 85 264728.090411 264728.089890 6: seq: 13, get_clock
Sent 86 264729.074918 264729.074397 6: seq: 14, get_clock
Sent 87 264729.381630 264729.380242 16: seq: 15, queue_digital_out oid=21 clock=2784512000 on_ticks=6400000
Sent 88 264730.058865 264730.058344 6: seq: 16, get_clock
Sent 89 264731.043850 264731.043329 6: seq: 17, get_clock
Sent 90 264732.028749 264732.028228 6: seq: 18, get_clock
Sent 91 264733.013615 264733.013094 6: seq: 19, get_clock
Sent 92 264733.581610 264733.580221 16: seq: 1a, queue_digital_out oid=21 clock=3053312000 on_ticks=6400000
Sent 93 264733.998465 264733.997944 6: seq: 1b, get_clock
Sent 94 264734.983417 264734.982896 6: seq: 1c, get_clock
Sent 95 264735.968384 264735.967863 6: seq: 1d, get_clock
Sent 96 264736.953117 264736.952596 6: seq: 1e, get_clock
Sent 97 264737.781747 264737.780359 16: seq: 1f, queue_digital_out oid=21 clock=3322112000 on_ticks=6400000
Sent 98 264737.938128 264737.937607 6: seq: 10, get_clock
Sent 99 264738.599341 264738.598820 6: seq: 11, emergency_stop
Dumping receive queue 100 messages
Receive: 0 264726.125942 264726.120552 11: seq: 12, clock clock=2560087213
Receive: 1 264726.241548 264726.120552 15: seq: 12, analog_in_state oid=11 next_clock=2586240000 value=30317
Receive: 2 264726.331584 264726.120552 15: seq: 12, analog_in_state oid=20 next_clock=2592000000 value=21543
Receive: 3 264726.542525 264726.120552 15: seq: 12, analog_in_state oid=11 next_clock=2605440000 value=30304
Receive: 4 264726.542705 264726.120552 13: seq: 12, stats count=89 sum=91161 sumsq=588560
Receive: 5 264726.631479 264726.120552 15: seq: 12, analog_in_state oid=20 next_clock=2611200000 value=21564
Receive: 6 264726.841542 264726.120552 15: seq: 12, analog_in_state oid=11 next_clock=2624640000 value=30285
Receive: 7 264726.931476 264726.120552 15: seq: 12, analog_in_state oid=20 next_clock=2630400000 value=21588
Receive: 8 264727.110706 264727.105486 11: seq: 13, clock clock=2623123400
Receive: 9 264727.141470 264727.105486 15: seq: 13, analog_in_state oid=11 next_clock=2643840000 value=30323
Receive: 10 264727.231415 264727.105486 15: seq: 13, analog_in_state oid=20 next_clock=2649600000 value=21637
Receive: 11 264727.441519 264727.105486 15: seq: 13, analog_in_state oid=11 next_clock=2663040000 value=30321
Receive: 12 264727.531550 264727.105486 15: seq: 13, analog_in_state oid=20 next_clock=2668800000 value=21679
Receive: 13 264727.741521 264727.105486 15: seq: 13, analog_in_state oid=11 next_clock=2682240000 value=30319
Receive: 14 264727.831593 264727.105486 15: seq: 13, analog_in_state oid=20 next_clock=2688000000 value=21713
Receive: 15 264728.041643 264727.105486 15: seq: 13, analog_in_state oid=11 next_clock=2701440000 value=30298
Receive: 16 264728.095747 264728.090411 11: seq: 14, clock clock=2686156807
Receive: 17 264728.131558 264728.090411 15: seq: 14, analog_in_state oid=20 next_clock=2707200000 value=21750
Receive: 18 264728.341497 264728.090411 15: seq: 14, analog_in_state oid=11 next_clock=2720640000 value=30296
Receive: 19 264728.431472 264728.090411 15: seq: 14, analog_in_state oid=20 next_clock=2726400000 value=21749
Receive: 20 264728.641575 264728.090411 15: seq: 14, analog_in_state oid=11 next_clock=2739840000 value=30321
Receive: 21 264728.731528 264728.090411 15: seq: 14, analog_in_state oid=20 next_clock=2745600000 value=21814
Receive: 22 264728.941549 264728.090411 15: seq: 14, analog_in_state oid=11 next_clock=2759040000 value=30314
Receive: 23 264729.031588 264728.090411 15: seq: 14, analog_in_state oid=20 next_clock=2764800000 value=21862
Receive: 24 264729.080263 264729.074918 11: seq: 15, clock clock=2749164222
Receive: 25 264729.241602 264729.074918 15: seq: 15, analog_in_state oid=11 next_clock=2778240000 value=30314
Receive: 26 264729.331522 264729.074918 15: seq: 15, analog_in_state oid=20 next_clock=2784000000 value=21891
Receive: 27 264729.541608 264729.381630 15: seq: 16, analog_in_state oid=11 next_clock=2797440000 value=30324
Receive: 28 264729.631571 264729.381630 15: seq: 16, analog_in_state oid=20 next_clock=2803200000 value=21922
Receive: 29 264729.841590 264729.381630 15: seq: 16, analog_in_state oid=11 next_clock=2816640000 value=30304
Receive: 30 264729.931527 264729.381630 15: seq: 16, analog_in_state oid=20 next_clock=2822400000 value=21946
Receive: 31 264730.064218 264730.058865 11: seq: 17, clock clock=2812136712
Receive: 32 264730.141546 264730.058865 15: seq: 17, analog_in_state oid=11 next_clock=2835840000 value=30322
Receive: 33 264730.231636 264730.058865 15: seq: 17, analog_in_state oid=20 next_clock=2841600000 value=21994
Receive: 34 264730.441651 264730.058865 15: seq: 17, analog_in_state oid=11 next_clock=2855040000 value=30315
Receive: 35 264730.531560 264730.058865 15: seq: 17, analog_in_state oid=20 next_clock=2860800000 value=22030
Receive: 36 264730.741612 264730.058865 15: seq: 17, analog_in_state oid=11 next_clock=2874240000 value=30318
Receive: 37 264730.831575 264730.058865 15: seq: 17, analog_in_state oid=20 next_clock=2880000000 value=22065
Receive: 38 264731.041575 264730.058865 15: seq: 17, analog_in_state oid=11 next_clock=2893440000 value=30314
Receive: 39 264731.049082 264731.043850 11: seq: 18, clock clock=2875169147
Receive: 40 264731.131586 264731.043850 15: seq: 18, analog_in_state oid=20 next_clock=2899200000 value=22095
Receive: 41 264731.341492 264731.043850 15: seq: 18, analog_in_state oid=11 next_clock=2912640000 value=30324
Receive: 42 264731.431613 264731.043850 15: seq: 18, analog_in_state oid=20 next_clock=2918400000 value=22131
Receive: 43 264731.624462 264731.043850 13: seq: 18, stats count=90 sum=90513 sumsq=562554
Receive: 44 264731.641562 264731.043850 15: seq: 18, analog_in_state oid=11 next_clock=2931840000 value=30290
Receive: 45 264731.731612 264731.043850 15: seq: 18, analog_in_state oid=20 next_clock=2937600000 value=22165
Receive: 46 264731.941603 264731.043850 15: seq: 18, analog_in_state oid=11 next_clock=2951040000 value=30325
Receive: 47 264732.034068 264731.043850 15: seq: 18, analog_in_state oid=20 next_clock=2956800000 value=22190
Receive: 48 264732.034423 264732.028749 11: seq: 19, clock clock=2938226497
Receive: 49 264732.241635 264732.028749 15: seq: 19, analog_in_state oid=11 next_clock=2970240000 value=30334
Receive: 50 264732.331588 264732.028749 15: seq: 19, analog_in_state oid=20 next_clock=2976000000 value=22230
Receive: 51 264732.541585 264732.028749 15: seq: 19, analog_in_state oid=11 next_clock=2989440000 value=30330
Receive: 52 264732.631582 264732.028749 15: seq: 19, analog_in_state oid=20 next_clock=2995200000 value=22242
Receive: 53 264732.841625 264732.028749 15: seq: 19, analog_in_state oid=11 next_clock=3008640000 value=30327
Receive: 54 264732.931593 264732.028749 15: seq: 19, analog_in_state oid=20 next_clock=3014400000 value=22291
Receive: 55 264733.018972 264733.013615 11: seq: 1a, clock clock=3001239923
Receive: 56 264733.141587 264733.013615 15: seq: 1a, analog_in_state oid=11 next_clock=3027840000 value=30335
Receive: 57 264733.231580 264733.013615 15: seq: 1a, analog_in_state oid=20 next_clock=3033600000 value=22331
Receive: 58 264733.441600 264733.013615 15: seq: 1a, analog_in_state oid=11 next_clock=3047040000 value=30313
Receive: 59 264733.531574 264733.013615 15: seq: 1a, analog_in_state oid=20 next_clock=3052800000 value=22350
Receive: 60 264733.741582 264733.581610 15: seq: 1b, analog_in_state oid=11 next_clock=3066240000 value=30323
Receive: 61 264733.831520 264733.581610 15: seq: 1b, analog_in_state oid=20 next_clock=3072000000 value=22395
Receive: 62 264734.003788 264733.998465 11: seq: 1c, clock clock=3064268603
Receive: 63 264734.041616 264733.998465 15: seq: 1c, analog_in_state oid=11 next_clock=3085440000 value=30329
Receive: 64 264734.131606 264733.998465 15: seq: 1c, analog_in_state oid=20 next_clock=3091200000 value=22423
Receive: 65 264734.341556 264733.998465 15: seq: 1c, analog_in_state oid=11 next_clock=3104640000 value=30323
Receive: 66 264734.431689 264733.998465 15: seq: 1c, analog_in_state oid=20 next_clock=3110400000 value=22449
Receive: 67 264734.641638 264733.998465 15: seq: 1c, analog_in_state oid=11 next_clock=3123840000 value=30315
Receive: 68 264734.731603 264733.998465 15: seq: 1c, analog_in_state oid=20 next_clock=3129600000 value=22480
Receive: 69 264734.941586 264733.998465 15: seq: 1c, analog_in_state oid=11 next_clock=3143040000 value=30330
Receive: 70 264734.988700 264734.983417 11: seq: 1d, clock clock=3127302150
Receive: 71 264735.031593 264734.983417 15: seq: 1d, analog_in_state oid=20 next_clock=3148800000 value=22510
Receive: 72 264735.241685 264734.983417 15: seq: 1d, analog_in_state oid=11 next_clock=3162240000 value=30319
Receive: 73 264735.331572 264734.983417 15: seq: 1d, analog_in_state oid=20 next_clock=3168000000 value=22541
Receive: 74 264735.541615 264734.983417 15: seq: 1d, analog_in_state oid=11 next_clock=3181440000 value=30336
Receive: 75 264735.631606 264734.983417 15: seq: 1d, analog_in_state oid=20 next_clock=3187200000 value=22577
Receive: 76 264735.841631 264734.983417 15: seq: 1d, analog_in_state oid=11 next_clock=3200640000 value=30320
Receive: 77 264735.931616 264734.983417 15: seq: 1d, analog_in_state oid=20 next_clock=3206400000 value=22620
Receive: 78 264735.973552 264735.968384 11: seq: 1e, clock clock=3190339414
Receive: 79 264736.141590 264735.968384 15: seq: 1e, analog_in_state oid=11 next_clock=3219840000 value=30327
Receive: 80 264736.231577 264735.968384 15: seq: 1e, analog_in_state oid=20 next_clock=3225600000 value=22651
Receive: 81 264736.441705 264735.968384 15: seq: 1e, analog_in_state oid=11 next_clock=3239040000 value=30303
Receive: 82 264736.531571 264735.968384 15: seq: 1e, analog_in_state oid=20 next_clock=3244800000 value=22667
Receive: 83 264736.724529 264735.968384 13: seq: 1e, stats count=92 sum=92861 sumsq=587313
Receive: 84 264736.741579 264735.968384 15: seq: 1e, analog_in_state oid=11 next_clock=3258240000 value=30315
Receive: 85 264736.831619 264735.968384 15: seq: 1e, analog_in_state oid=20 next_clock=3264000000 value=22711
Receive: 86 264736.958445 264736.953117 11: seq: 1f, clock clock=3253364238
Receive: 87 264737.041693 264736.953117 15: seq: 1f, analog_in_state oid=11 next_clock=3277440000 value=30311
Receive: 88 264737.131701 264736.953117 15: seq: 1f, analog_in_state oid=20 next_clock=3283200000 value=22732
Receive: 89 264737.341608 264736.953117 15: seq: 1f, analog_in_state oid=11 next_clock=3296640000 value=30336
Receive: 90 264737.431627 264736.953117 15: seq: 1f, analog_in_state oid=20 next_clock=3302400000 value=22766
Receive: 91 264737.641689 264736.953117 15: seq: 1f, analog_in_state oid=11 next_clock=3315840000 value=30335
Receive: 92 264737.731646 264736.953117 15: seq: 1f, analog_in_state oid=20 next_clock=3321600000 value=22806
Receive: 93 264737.943497 264737.781747 15: seq: 10, analog_in_state oid=11 next_clock=3335040000 value=30305
Receive: 94 264737.943853 264737.938128 11: seq: 11, clock clock=3316425305
Receive: 95 264738.031507 264737.938128 15: seq: 11, analog_in_state oid=20 next_clock=3340800000 value=22819
Receive: 96 264738.241711 264737.938128 15: seq: 11, analog_in_state oid=11 next_clock=3354240000 value=30327
Receive: 97 264738.331638 264737.938128 15: seq: 11, analog_in_state oid=20 next_clock=3360000000 value=22854
Receive: 98 264738.541649 264737.938128 15: seq: 11, analog_in_state oid=11 next_clock=3373440000 value=30321
Receive: 99 264738.603881 264738.599341 12: seq: 12, shutdown clock=3358718959 static_string_id=Command request
Stats 264738.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2852 bytes_read=11384 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999268  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.842 memavail=3469036 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.0 pwm=1.000
Stats 264739.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2858 bytes_read=11480 bytes_retransmit=0 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999270  heater_bed: target=0 temp=37.5 pwm=0.000 sysload=0.00 cputime=883.845 memavail=3469420 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=82.5 pwm=1.000
Stats 264740.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2864 bytes_read=11586 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999261  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.849 memavail=3469456 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=82.2 pwm=1.000
Stats 264741.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2870 bytes_read=11707 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999259  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.854 memavail=3469456 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=81.7 pwm=1.000
Stats 264742.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2892 bytes_read=11853 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999253  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.858 memavail=3469464 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=81.3 pwm=1.000
Stats 264743.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2898 bytes_read=11959 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999243  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.00 cputime=883.862 memavail=3469468 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=80.9 pwm=1.000
Stats 264744.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2904 bytes_read=12080 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999241  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.00 cputime=883.866 memavail=3469468 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=80.6 pwm=1.000
Stats 264745.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2910 bytes_read=12201 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999239  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.871 memavail=3469468 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=80.1 pwm=1.000
Stats 264746.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2932 bytes_read=12319 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999235  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.875 memavail=3469468 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=79.8 pwm=1.000
Stats 264747.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2938 bytes_read=12453 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999228  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.879 memavail=3469468 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=79.4 pwm=1.000
Stats 264748.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2944 bytes_read=12574 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999224  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.883 memavail=3469468 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=78.9 pwm=1.000
Stats 264749.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2950 bytes_read=12680 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999213  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.887 memavail=3469256 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=78.6 pwm=1.000
Stats 264750.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2972 bytes_read=12813 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999212  heater_bed: target=0 temp=37.4 pwm=0.000 sysload=0.00 cputime=883.892 memavail=3469256 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=78.3 pwm=1.000
Stats 264751.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2978 bytes_read=12934 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999212  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.896 memavail=3469256 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=77.8 pwm=1.000
Stats 264752.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2984 bytes_read=13049 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.900 memavail=3469260 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=77.6 pwm=1.000
Stats 264753.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2990 bytes_read=13161 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.904 memavail=3469260 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=77.2 pwm=1.000
Stats 264754.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3012 bytes_read=13286 bytes_retransmit=0 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999206  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.909 memavail=3469260 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=76.8 pwm=1.000
Stats 264755.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3018 bytes_read=13385 bytes_retransmit=0 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999203  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.913 memavail=3469260 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=76.5 pwm=1.000
Stats 264756.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3024 bytes_read=13501 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=883.917 memavail=3469264 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=76.2 pwm=1.000
Stats 264757.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3036 bytes_read=13635 bytes_retransmit=0 bytes_invalid=0 send_seq=282 receive_seq=281 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.922 memavail=3469264 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=75.8 pwm=1.000
Stats 264758.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3042 bytes_read=13757 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999200  heater_bed: target=0 temp=37.3 pwm=0.000 sysload=0.00 cputime=883.926 memavail=3469264 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=75.5 pwm=1.000
Stats 264759.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3064 bytes_read=13890 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999190  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.931 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=75.2 pwm=1.000
Stats 264760.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3070 bytes_read=14011 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999189  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.935 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=74.8 pwm=1.000
Stats 264761.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3076 bytes_read=14117 bytes_retransmit=0 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999188  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.939 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=74.5 pwm=1.000
Stats 264762.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3082 bytes_read=14266 bytes_retransmit=0 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999183  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.943 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=74.1 pwm=1.000
Stats 264763.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3104 bytes_read=14384 bytes_retransmit=0 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999178  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=883.948 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=73.9 pwm=1.000
Stats 264764.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3110 bytes_read=14490 bytes_retransmit=0 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999182  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=883.952 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=73.6 pwm=1.000
Stats 264765.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3116 bytes_read=14626 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999180  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.956 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=73.2 pwm=1.000
Stats 264766.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3122 bytes_read=14732 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999177  heater_bed: target=0 temp=37.2 pwm=0.000 sysload=0.00 cputime=883.960 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=73.0 pwm=1.000
Stats 264767.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3144 bytes_read=14863 bytes_retransmit=0 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999173  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.965 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=72.7 pwm=1.000
Stats 264768.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3150 bytes_read=14999 bytes_retransmit=0 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999175  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=883.969 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=72.4 pwm=1.000
Stats 264769.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3156 bytes_read=15105 bytes_retransmit=0 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999177  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.973 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=72.1 pwm=1.000
Stats 264770.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3162 bytes_read=15211 bytes_retransmit=0 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999170  heater_bed: target=0 temp=37.1 pwm=0.000 sysload=0.00 cputime=883.977 memavail=3469268 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=71.9 pwm=1.000
Stats 264771.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3184 bytes_read=15359 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999168  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=883.982 memavail=3469272 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=71.5 pwm=1.000
Stats 264772.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3190 bytes_read=15478 bytes_retransmit=0 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999165  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=883.986 memavail=3469276 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=71.2 pwm=1.000
Stats 264773.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3196 bytes_read=15584 bytes_retransmit=0 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999165  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=883.990 memavail=3469276 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=71.0 pwm=1.000
Stats 264774.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3202 bytes_read=15720 bytes_retransmit=0 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999160  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=883.994 memavail=3469276 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=70.6 pwm=1.000
Stats 264775.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3224 bytes_read=15838 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999161  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=883.999 memavail=3469276 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=70.4 pwm=1.000
Stats 264776.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3230 bytes_read=15944 bytes_retransmit=0 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999166  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=884.003 memavail=3469276 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=70.1 pwm=1.000
Stats 264777.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3236 bytes_read=16093 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999166  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=884.007 memavail=3469280 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.8 pwm=1.000
Stats 264778.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3242 bytes_read=16199 bytes_retransmit=0 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999166  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.011 memavail=3469280 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.6 pwm=1.000
Stats 264779.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3248 bytes_read=16320 bytes_retransmit=0 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999171  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=884.016 memavail=3469280 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.4 pwm=1.000
Stats 264780.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3270 bytes_read=16453 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.020 memavail=3469280 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.1 pwm=1.000
Stats 264781.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3276 bytes_read=16559 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=884.024 memavail=3469280 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=68.8 pwm=1.000
Stats 264782.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3282 bytes_read=16693 bytes_retransmit=0 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999173  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.029 memavail=3469280 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=68.6 pwm=1.000
Stats 264783.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3288 bytes_read=16814 bytes_retransmit=0 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999173  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.033 memavail=3469284 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=68.3 pwm=1.000
Stats 264784.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3310 bytes_read=16932 bytes_retransmit=0 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.037 memavail=3469284 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=68.0 pwm=1.000
Stats 264785.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3316 bytes_read=17053 bytes_retransmit=0 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=37.0 pwm=0.000 sysload=0.00 cputime=884.041 memavail=3469284 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=67.8 pwm=1.000
Stats 264786.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3322 bytes_read=17174 bytes_retransmit=0 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999164  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.045 memavail=3469284 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=67.5 pwm=1.000
Stats 264787.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3328 bytes_read=17293 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999164  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.049 memavail=3469288 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=67.3 pwm=1.000
Stats 264788.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3345 bytes_read=17421 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999162  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.054 memavail=3469288 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=67.1 pwm=1.000
Stats 264789.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3351 bytes_read=17542 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999165  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.058 memavail=3469296 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=66.8 pwm=1.000
Stats 264790.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3357 bytes_read=17648 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.062 memavail=3469296 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=66.6 pwm=1.000
Stats 264791.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3363 bytes_read=17769 bytes_retransmit=0 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999167  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.066 memavail=3469296 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=66.3 pwm=1.000
Stats 264792.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3385 bytes_read=17915 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999168  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.071 memavail=3469296 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=66.1 pwm=1.000
Stats 264793.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3391 bytes_read=18021 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.075 memavail=3469296 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.9 pwm=1.000
Stats 264794.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3397 bytes_read=18142 bytes_retransmit=0 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999170  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.079 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.7 pwm=1.000
Stats 264795.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3403 bytes_read=18263 bytes_retransmit=0 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999168  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.084 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.4 pwm=1.000
Stats 264796.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3425 bytes_read=18381 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999169  heater_bed: target=0 temp=36.9 pwm=0.000 sysload=0.00 cputime=884.088 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.2 pwm=1.000
Stats 264797.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3431 bytes_read=18515 bytes_retransmit=0 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999170  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.092 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.0 pwm=1.000
Stats 264798.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3437 bytes_read=18636 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999171  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.097 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=64.7 pwm=1.000
Stats 264799.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3443 bytes_read=18742 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999170  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.101 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=64.5 pwm=1.000
Stats 264800.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3449 bytes_read=18863 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999175  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.105 memavail=3469300 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=64.3 pwm=1.000
Stats 264801.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3471 bytes_read=18996 bytes_retransmit=0 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999173  heater_bed: target=0 temp=36.8 pwm=0.000 sysload=0.00 cputime=884.109 memavail=3469320 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=64.0 pwm=1.000
Stats 264802.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3477 bytes_read=19102 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999174  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.114 memavail=3469320 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.9 pwm=1.000
Stats 264803.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3483 bytes_read=19236 bytes_retransmit=0 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999176  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.118 memavail=3469332 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.7 pwm=1.000
Stats 264804.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3489 bytes_read=19357 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999179  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.122 memavail=3469332 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.3 pwm=1.000
Stats 264805.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3511 bytes_read=19475 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999180  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.127 memavail=3469332 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.2 pwm=1.000
Stats 264806.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3517 bytes_read=19596 bytes_retransmit=0 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999180  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.131 memavail=3469332 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.0 pwm=1.000
Stats 264807.7: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3523 bytes_read=19717 bytes_retransmit=0 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999183  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.135 memavail=3469332 print_time=42.532 buffer_time=0.000 print_stall=0 extruder: target=200 temp=62.8 pwm=1.000
Attempting MCU 'mcu' reset command
webhooks client 139676230809008: Disconnected
Restarting printer
Start printer at Sat Aug 12 00:12:57 2023 (1691799177.1 264808.9)
===== Config file =====
[force_move]
enable_force_move = true

[virtual_sdcard]
path = /home/tech/printer_data/gcodes

[exclude_object]

[pause_resume]

[display_status]

[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration = 1
gcode = 
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE=0

[gcode_macro _globals]
variable_filament_sensor_enabled = 1
variable_beeping_enabled = 0
variable_bed_temp_over = 10
variable_kamp_enable = 0
variable_pre_purge_prime_length = 1.40
gcode = 

[gcode_macro CONDITIONAL_BEEP]
gcode = 
	
	{% set i = params.I|default(1)|int %}
	{% set dur = params.DUR|default(100)|int %}
	{% set freq = params.FREQ|default(2000)|int %}
	
	{% set BEEPING_ENABLED=printer["gcode_macro _globals"].beeping_enabled|default(-1)|int %}
	
	{% if BEEPING_ENABLED == 1 %}
	BEEP I={i} DUR={dur} FREQ={freq}
	{% endif %}

[gcode_macro ADJUST_FILAMENT_SENSOR_STATUS]
gcode = 
	
	{% set NEWSTATUS = params.ENABLE|default(-1)|int %}
	
	{% set FILAMENT_SENSOR_ENABLED=printer["gcode_macro _globals"].filament_sensor_enabled|default(-1)|int %}
	
	{% if FILAMENT_SENSOR_ENABLED == 1 and NEWSTATUS != -1 %}
	SET_FILAMENT_SENSOR SENSOR=filament_sensor ENABLE={NEWSTATUS}
	{% endif %}

[gcode_macro M109]
rename_existing = M99109
gcode = 
	
	{% set s = params.S|float %}
	
	M104 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM={s} MAXIMUM={s+1}
	{% endif %}

[gcode_macro M190]
rename_existing = M99190
gcode = 
	
	{% set s = params.S|float %}
	
	M140 {% for p in params %}{'%s%s' % (p, params[p])}{% endfor %}
	{% if s != 0 %}
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={s} MAXIMUM={s+1}
	{% endif %}

[gcode_macro PURGE_LINE]
gcode = 
	{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	
	{% set extrudeAmount = 26.6 %}
	{% set movementLength = 100.0 %}
	{% set movementSpeed = 15 * 60 %}
	{% set xStart = 0.5 %}
	{% set yStart = 0.5 %}
	
	
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
	
	G92 E0.0
	G90
	G0 X{xStart} Y{yStart} F{maxVelocityAdjusted}
	G1 Z0.4 F500.0
	M83
	G1 E{PRE_PURGE_PRIME_LENGTH} F500
	G1 X{xStart + movementLength} E{extrudeAmount} F{movementSpeed}
	
	G92 E0.0
	M82
	G1 Z5.0

[gcode_macro CANCEL_PRINT]
rename_existing = BASE_CANCEL_PRINT
gcode = 
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	CLEAR_PAUSE
	SDCARD_RESET_FILE
	PRINT_END
	BASE_CANCEL_PRINT

[gcode_macro PRINT_START]
gcode = 
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	{% set bedtemp = params.BED|int %}
	{% set hotendtemp = params.HOTEND|int %}
	{% set chambertemp = params.CHAMBER|default(0)|int %}
	
	
	{% set bedtempSlicer = bedtemp %}
	{% set bedtempOver = printer["gcode_macro _globals"].bed_temp_over|default(0)|int %}
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set maxVelocityAdjusted =  (0.90 * maxVelocity * 60)|int %}
	{% set kampEnabled=printer["gcode_macro _globals"].kamp_enable|default(0)|int %}
	
	{% if printer.configfile.settings.safe_z_home %}
	{% set startX = printer.configfile.settings.safe_z_home.home_xy_position[0]|float %}
	{% set startY = printer.configfile.settings.safe_z_home.home_xy_position[1]|float %}
	{% endif %}
	
	{% set bedtempAlmost = ((bedtemp - 2, 0, printer.heater_bed.temperature|int)|max, bedtemp)|max %}
	{% set hotendtempStepOne = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 150)|max %}
	{% set hotendtempStepTwo = ((hotendtemp, printer[printer.toolhead.extruder].temperature|int)|min, 170)|max %}
	
	
	{% if bedtempAlmost > bedtemp %}
	{% if (bedtempAlmost - bedtempOver) <= bedtemp %}
	{% set bedtemp = bedtempAlmost %}
	{% endif %}
	{% endif %}
	
	G90
	M140 S{bedtempAlmost}
	M104 S{hotendtempStepOne}
	G28 X Y
	{% if printer.configfile.settings.safe_z_home %}
	G1 X{startX} Y{startY} F{maxVelocityAdjusted}
	{% endif %}
	
	M190 S{bedtempAlmost}
	{% if kampEnabled == 0 %}
	M104 S{hotendtempStepTwo}
	{% endif %}
	M190 S{bedtemp}
	M140 S{bedtempSlicer}
	
	{% if kampEnabled == 0 %}
	BED_MESH_PROFILE LOAD=default
	M104 S{hotendtemp}
	G28 Z
	{% else %}
	G28 Z
	BED_MESH_CALIBRATE
	M104 S{hotendtemp}
	{% endif %}
	
	G1 X0 Y0 F{maxVelocityAdjusted}
	M109 S{hotendtemp}
	
	G1 Z20 F3000

[gcode_macro PRINT_END]
gcode = 
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
	CONDITIONAL_BEEP I=2 DUR=30 FREQ=8500
	{% set PRE_PURGE_PRIME_LENGTH=printer["gcode_macro _globals"].pre_purge_prime_length|default(1.40)|float %}
	
	M400
	G92 E0
	G1 E-{PRE_PURGE_PRIME_LENGTH} F400
	G91
	
	
	{% set zVelocity = printer.configfile.settings.printer.max_z_velocity|default(15)|int %}
	{% set maxVelocity = printer.configfile.settings.printer.max_velocity|default(200)|int %}
	{% set zVelocityAdjusted =  (0.95 * zVelocity * 60)|int  %}
	{% set maxVelocityAdjusted =  (0.95 * maxVelocity * 60)|int  %}
	
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	{% set max_z = printer.configfile.config["stepper_z"]["position_max"]|float %}
	
	
	{% if printer.toolhead.position.x < (max_x - 20) %}
	{% set x_safe = 20.0 %}
	{% else %}
	{% set x_safe = -20.0 %}
	{% endif %}
	
	{% if printer.toolhead.position.y < (max_y - 20) %}
	{% set y_safe = 20.0 %}
	{% else %}
	{% set y_safe = -20.0 %}
	{% endif %}
	
	{% set lift_height = 25.0 %}
	{% if printer.toolhead.position.z < (max_z - lift_height) %}
	{% set z_safe = lift_height %}
	{% else %}
	{% set z_safe = max_z - printer.toolhead.position.z %}
	{% endif %}
	
	G0 Z{z_safe} F{zVelocityAdjusted}
	G0 X{x_safe} Y{y_safe} F{maxVelocityAdjusted}
	TURN_OFF_HEATERS
	M107
	G90
	G0 X60 Y{max_y} F3600

[gcode_macro LOAD_FILAMENT]
gcode = 
	M83
	G1 E30 F300
	G1 E15 F150
	M82

[gcode_macro UNLOAD_FILAMENT]
gcode = 
	M83
	G1 E10 F300
	G1 E-40 F1800
	M82

[gcode_macro M600]
gcode = 
	CONDITIONAL_BEEP i=1 dur=300
	CONDITIONAL_BEEP i=1 dur=100
	CONDITIONAL_BEEP i=1 dur=100
	PAUSE

[gcode_macro PAUSE]
rename_existing = BASE_PAUSE
gcode = 
	
	{% set z = params.Z|default(10)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE={z}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=etemp VALUE={printer['extruder'].target}
	
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=0
	
	SAVE_GCODE_STATE NAME=PAUSE
	BASE_PAUSE
	{% if (printer.gcode_move.position.z + z) < printer.toolhead.axis_maximum.z %}
	G91
	G1 Z{z} F900
	{% else %}
	{ action_respond_info("Pause zhop exceeds maximum Z height.") }
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=zhop VALUE=0
	{% endif %}
	G90
	G1 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} F6000
	SAVE_GCODE_STATE NAME=PAUSEPARK
	M104 S0
	SET_IDLE_TIMEOUT TIMEOUT=43200
	{% endif %}

[gcode_macro RESUME]
rename_existing = BASE_RESUME
variable_zhop = 0
variable_etemp = 0
gcode = 
	
	{% set e = params.E|default(2.5)|int %}
	
	{% if printer['pause_resume'].is_paused|int == 1 %}
	ADJUST_FILAMENT_SENSOR_STATUS ENABLE=1
	
	SET_IDLE_TIMEOUT TIMEOUT={printer.configfile.settings.idle_timeout.timeout}
	{% if etemp > 0 %}
	M109 S{etemp|int}
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSEPARK MOVE=1 MOVE_SPEED=100
	G91
	M83
	{% if printer[printer.toolhead.extruder].temperature >= printer.configfile.settings.extruder.min_extrude_temp %}
	G1 Z{zhop * -1} E{e} F900
	{% else %}
	G1 Z{zhop * -1} F900
	{% endif %}
	RESTORE_GCODE_STATE NAME=PAUSE MOVE=1 MOVE_SPEED=60
	BASE_RESUME
	{% endif %}

[gcode_macro _CG28]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}

[gcode_macro BEEP]
description = BEEP I=3 DUR=200 FREQ=2000: Beep 3 times, for 200ms each, at 2kHz frequency.
gcode = 
	
	{% set i = params.I|default(1)|int %}
	{% set dur = params.DUR|default(100)|int %}
	{% set freq = params.FREQ|default(2000)|int %}
	
	{% for iteration in range(i|int) %}
	SET_PIN PIN=beeper VALUE=0.8 CYCLE_TIME={ 1.0/freq if freq > 0 else 1 }
	G4 P{dur}
	SET_PIN PIN=beeper VALUE=0
	G4 P{dur}
	{% endfor %}

[gcode_macro PARKFRONT]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKFRONTLOW]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKFRONT
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_minimum.y+5} Z20 F6000
	RESTORE_GCODE_STATE NAME=PARKFRONT

[gcode_macro PARKREAR]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKREAR
	G90
	G0 X{printer.toolhead.axis_minimum.x+10} Y{printer.toolhead.axis_maximum.y-10} Z{printer.toolhead.axis_maximum.z-50} F6000
	RESTORE_GCODE_STATE NAME=PARKREAR

[gcode_macro PARKCENTER]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKCENTER
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z{printer.toolhead.axis_maximum.z/2} F6000
	RESTORE_GCODE_STATE NAME=PARKCENTER

[gcode_macro PARKBED]
gcode = 
	{% if "xyz" not in printer.toolhead.homed_axes %}
	G28
	{% endif %}
	SAVE_GCODE_STATE NAME=PARKBED
	G90
	G0 X{printer.toolhead.axis_maximum.x/2} Y{printer.toolhead.axis_maximum.y/2} Z15 F6000
	RESTORE_GCODE_STATE NAME=PARKBED

[gcode_macro MECHANICAL_GANTRY_CALIBRATION]
gcode = 
	
	{% set my_current = params.CURRENT|default(0.20)|float %}
	
	{% set oldcurrent = printer.configfile.settings["tmc2209 stepper_z"].run_current %}
	{% set oldhold = printer.configfile.settings["tmc2209 stepper_z"].hold_current %}
	{% set x_max = printer.toolhead.axis_maximum.x %}
	{% set y_max = printer.toolhead.axis_maximum.y %}
	{% set z_max = printer.toolhead.axis_maximum.z %}
	{% set fast_move_z = printer.configfile.settings["printer"].max_z_velocity %}
	{% set fast_move = printer.configfile.settings["printer"].max_velocity %}
	M117 {printer.homed_axes}
	{% if printer.homed_axes != 'xyz' %}
	G28
	{% endif %}
	G90
	G0 X{x_max / 2} Y{y_max / 2} F{fast_move * 30 }
	
	G0 Z{z_max -5} F{fast_move_z * 60 }
	
	SET_TMC_CURRENT STEPPER=stepper_z CURRENT={my_current}
	
	{% if printer.configfile.settings["stepper_z1"] %}
	SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={my_current}
	{% endif %}
	
	
	G4 P200
	
	SET_KINEMATIC_POSITION Z={z_max - 25}
	
	G1 Z{z_max} F{6 * 60}
	
	G4 P10000
	G1 Z{z_max -6} F{6 * 60}
	
	G4 P200
	
	SET_TMC_CURRENT STEPPER=stepper_z CURRENT={oldcurrent} HOLDCURRENT={oldhold}
	
	{% if printer.configfile.settings["stepper_z1"] %}
	SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={oldcurrent} HOLDCURRENT={oldhold}
	{% endif %}
	
	G1 Z{z_max -30} F{6 * 60}
	
	G4 P200
	G28 Z

[gcode_macro G34]
gcode = 
	MECHANICAL_GANTRY_CALIBRATION

[gcode_macro PID_TEST_BED]
gcode = 
	
	{% set TARGETTEMP = params.TEMP|default(70)|int %}
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	G28
	G90
	G1 X{max_x/2} Y{max_y/2} Z40 F6000
	PID_CALIBRATE HEATER=heater_bed TARGET={TARGETTEMP}

[gcode_macro PID_TEST_HOTEND]
gcode = 
	
	{% set TARGETTEMP = params.TEMP|default(245)|int %}
	
	{% set max_x = printer.configfile.config["stepper_x"]["position_max"]|float %}
	{% set max_y = printer.configfile.config["stepper_y"]["position_max"]|float %}
	G28
	G90
	G1 X{max_x/2} Y{max_y/2} Z10 F6000
	M106 S64
	PID_CALIBRATE HEATER=extruder TARGET={TARGETTEMP}

[gcode_macro PID_TEST_ALL]
gcode = 
	PID_TEST_BED
	PID_TEST_HOTEND
	SAVE_CONFIG

[gcode_macro DO_PROBE_CALIBRATE]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	PROBE_CALIBRATE

[gcode_macro DO_AXIS_TWIST_CALIBRATION]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	AXIS_TWIST_COMPENSATION_CALIBRATE

[gcode_macro DO_SAVE_CONFIG]
gcode = 
	SAVE_CONFIG

[gcode_macro DO_CREATE_MESH]
gcode = 
	SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=60
	SET_HEATER_TEMPERATURE HEATER=extruder TARGET=180
	TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM=60
	TEMPERATURE_WAIT SENSOR=extruder MINIMUM=180
	G28
	_BED_MESH_CALIBRATE

[gcode_macro ENABLE_MOTORS]
gcode = 
	SET_STEPPER_ENABLE STEPPER=stepper_x ENABLE=1
	SET_STEPPER_ENABLE STEPPER=stepper_y ENABLE=1
	SET_STEPPER_ENABLE STEPPER=stepper_z ENABLE=1

[gcode_macro BED_MESH_CALIBRATE]
rename_existing = _BED_MESH_CALIBRATE
gcode = 
	
	{% set all_points = printer.exclude_object.objects | map(attribute='polygon') | sum(start=[]) %}
	{% set bed_mesh_min = printer.configfile.settings.bed_mesh.mesh_min %}
	{% set bed_mesh_max = printer.configfile.settings.bed_mesh.mesh_max %}
	{% set probe_count = printer.configfile.settings.bed_mesh.probe_count %}
	{% set verbose_enable = printer["gcode_macro _KAMP_Settings"].verbose_enable | abs %}
	{% set mesh_margin = printer["gcode_macro _KAMP_Settings"].mesh_margin | float %}
	{% set fuzz_amount = printer["gcode_macro _KAMP_Settings"].fuzz_amount | float %}
	{% set probe_count = probe_count if probe_count|length > 1 else probe_count * 2  %}
	{% set max_probe_point_distance_x = ( bed_mesh_max[0] - bed_mesh_min[0] ) / (probe_count[0] - 1)  %}
	{% set max_probe_point_distance_y = ( bed_mesh_max[1] - bed_mesh_min[1] ) / (probe_count[1] - 1)  %}
	{% set x_min = all_points | map(attribute=0) | min | default(bed_mesh_min[0]) %}
	{% set y_min = all_points | map(attribute=1) | min | default(bed_mesh_min[1]) %}
	{% set x_max = all_points | map(attribute=0) | max | default(bed_mesh_max[0]) %}
	{% set y_max = all_points | map(attribute=1) | max | default(bed_mesh_max[1]) %}
	
	{% set fuzz_range = range((0) | int, (fuzz_amount * 100) | int + 1) %}
	{% set adapted_x_min = (bed_mesh_min[0] + fuzz_amount - mesh_margin, x_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_y_min = (bed_mesh_min[1] + fuzz_amount - mesh_margin, y_min) | max - (fuzz_range | random / 100.0) %}
	{% set adapted_x_max = (bed_mesh_max[0] - fuzz_amount + mesh_margin, x_max) | min + (fuzz_range | random / 100.0) %}
	{% set adapted_y_max = (bed_mesh_max[1] - fuzz_amount + mesh_margin, y_max) | min + (fuzz_range | random / 100.0) %}
	
	{% set points_x = (((adapted_x_max - adapted_x_min) / max_probe_point_distance_x) | round(method='ceil') | int) + 1 %}
	{% set points_y = (((adapted_y_max - adapted_y_min) / max_probe_point_distance_y) | round(method='ceil') | int) + 1 %}
	
	{% if (([points_x, points_y]|max) > 6) %}
	{% set algorithm = "bicubic" %}
	{% set min_points = 4 %}
	{% else %}
	{% set algorithm = "lagrange" %}
	{% set min_points = 3 %}
	{% endif %}
	
	{% set points_x = [points_x, min_points]|max %}
	{% set points_y = [points_y, min_points]|max %}
	{% set points_x = [points_x, probe_count[0]]|min %}
	{% set points_y = [points_y, probe_count[1]]|min %}
	
	{% if verbose_enable == True %}
	
	{ action_respond_info( "Algorithm: {}.".format(
	(algorithm),
	)) }
	
	{ action_respond_info("Default probe count: {},{}.".format(
	(probe_count[0]),
	(probe_count[1]),
	)) }
	
	{ action_respond_info("Adapted probe count: {},{}.".format(
	(points_x),
	(points_y),
	)) }
	
	{action_respond_info("Default mesh bounds: {}, {}.".format(
	(bed_mesh_min[0],bed_mesh_min[1]),
	(bed_mesh_max[0],bed_mesh_max[1]),
	)) }
	
	{% if mesh_margin > 0 %}
	{action_respond_info("Mesh margin is {}, mesh bounds extended by {}mm.".format(
	(mesh_margin),
	(mesh_margin),
	)) }
	{% else %}
	{action_respond_info("Mesh margin is 0, margin not increased.")}
	{% endif %}
	
	{% if fuzz_amount > 0 %}
	{action_respond_info("Mesh point fuzzing enabled, points fuzzed up to {}mm.".format(
	(fuzz_amount),
	)) }
	{% else %}
	{action_respond_info("Fuzz amount is 0, mesh points not fuzzed.")}
	{% endif %}
	
	{ action_respond_info("Adapted mesh bounds: {}, {}.".format(
	(adapted_x_min, adapted_y_min),
	(adapted_x_max, adapted_y_max),
	)) }
	
	{action_respond_info("KAMP adjustments successful. Happy KAMPing!")}
	
	{% endif %}
	
	{% if probe_dock_enable == True %}
	{attach_macro}
	{% endif %}
	
	_BED_MESH_CALIBRATE mesh_min={adapted_x_min},{adapted_y_min} mesh_max={adapted_x_max},{adapted_y_max} ALGORITHM={algorithm} PROBE_COUNT={points_x},{points_y}
	
	{% if probe_dock_enable == True %}
	{detach_macro}
	{% endif %}

[gcode_macro _KAMP_Settings]
description = This macro contains all adjustable settings for KAMP
variable_verbose_enable = True
variable_mesh_margin = 0
variable_fuzz_amount = 0
variable_probe_dock_enable = False
variable_attach_macro = 'Attach_Probe'
variable_detach_macro = 'Dock_Probe'
variable_purge_height = 0.8
variable_tip_distance = 0
variable_purge_margin = 10
variable_purge_amount = 30
variable_flow_rate = 12
gcode = 
	
	{action_respond_info(" Running the KAMP_Settings macro does nothing, it is only used for storing KAMP settings. ")}

[gcode_macro TEST_SPEED]
gcode = 
	
	{% set speed  = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
	
	{% set iterations = params.ITERATIONS|default(5)|int %}
	
	{% set accel  = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
	
	{% set bound = params.BOUND|default(20)|int %}
	
	{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
	
	
	
	{% set x_min = printer.toolhead.axis_minimum.x + bound %}
	{% set x_max = printer.toolhead.axis_maximum.x - bound %}
	{% set y_min = printer.toolhead.axis_minimum.y + bound %}
	{% set y_max = printer.toolhead.axis_maximum.y - bound %}
	
	
	
	{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
	{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
	
	
	{% set x_center_min = x_center - (smallpatternsize/2) %}
	{% set x_center_max = x_center + (smallpatternsize/2) %}
	{% set y_center_min = y_center - (smallpatternsize/2) %}
	{% set y_center_max = y_center + (smallpatternsize/2) %}
	
	
	SAVE_GCODE_STATE NAME=TEST_SPEED
	
	
	{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
	
	
	M400
	G28
	
	{% if printer.configfile.settings.quad_gantry_level %}
	{% if printer.quad_gantry_level.applied == False %}
	QUAD_GANTRY_LEVEL
	G28 Z
	{% endif %}
	{% endif %}
	
	G90
	G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
	M400
	G28 X Y
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	
	G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
	
	
	SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
	
	{% for i in range(iterations) %}
	
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	
	
	G0 X{x_min} Y{y_min} F{speed*60}
	G0 X{x_min} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_max} F{speed*60}
	G0 X{x_max} Y{y_min} F{speed*60}
	
	
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	
	
	G0 X{x_center_min} Y{y_center_min} F{speed*60}
	G0 X{x_center_min} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_max} F{speed*60}
	G0 X{x_center_max} Y{y_center_min} F{speed*60}
	{% endfor %}
	
	
	SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
	
	
	M400
	G28
	
	G90
	G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
	G4 P1000
	GET_POSITION
	
	
	RESTORE_GCODE_STATE NAME=TEST_SPEED

[mcu]
serial = /dev/pts/2
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 200
max_accel = 3000
max_z_velocity = 15
max_z_accel = 45
square_corner_velocity = 8.0

[stepper_x]
step_pin = PB13
dir_pin = PB12
enable_pin = !PB14
microsteps = 128
rotation_distance = 40
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 40
homing_retract_dist = 0

[tmc2209 stepper_x]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 0
driver_sgthrs = 86
diag_pin = PC0

[stepper_y]
step_pin = PB10
dir_pin = !PB2
enable_pin = !PB11
microsteps = 128
rotation_distance = 40
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 40
homing_retract_dist = 0

[tmc2209 stepper_y]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 2
driver_sgthrs = 81
diag_pin = PC1

[stepper_z]
step_pin = PB0
dir_pin = PC5
enable_pin = !PB1
microsteps = 128
rotation_distance = 4
endstop_pin = probe:z_virtual_endstop
position_min = -4
position_max = 340
homing_speed = 5

[tmc2209 stepper_z]
uart_pin = PC11
tx_pin = PC10
run_current = 0.600
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 1

[extruder]
step_pin = PB3
dir_pin = PB4
enable_pin = !PD1
microsteps = 128
rotation_distance = 4.65
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA0
min_temp = 0
max_temp = 300
max_extrude_only_distance = 150.0
control = pid
pid_kp = 25.397
pid_ki = 1.992
pid_kd = 80.954

[tmc2209 extruder]
uart_pin = PC11
tx_pin = PC10
run_current = 0.550
stealthchop_threshold = 0
interpolate = False
sense_resistor = 0.150
uart_address = 3

[heater_bed]
heater_pin = PC9
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC4
min_temp = 0
max_temp = 110
control = pid
pid_kp = 73.292
pid_ki = 1.086
pid_kd = 1236.800

[probe]
pin = PC14
x_offset = 27
y_offset = -20
samples = 3
samples_result = median
samples_tolerance = 0.01
samples_tolerance_retries = 5
z_offset = 1.550

[safe_z_home]
home_xy_position = 123, 170
speed = 100.0
z_hop = 10
z_hop_speed = 15

[bed_mesh]
speed = 175
mesh_min = 30, 30
mesh_max = 270, 270
probe_count = 5,5
algorithm = bicubic
fade_start = 1
fade_end = 10
fade_target = 0

[fan]
pin = PC6

[controller_fan electronic_enclosure_fan]
pin = PC7
idle_timeout = 60
idle_speed = 0
stepper = stepper_x, stepper_y, stepper_z

[heater_fan hotend_fan]
pin = PB15
heater = extruder
heater_temp = 50.0

[output_pin beeper]
pin = PB5
value = 0
shutdown_value = 0
pwm = True
cycle_time = 0.0005

[board_pins]
aliases = 
	
	EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>,
	EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PD6, EXP1_10=<5V>

[axis_twist_compensation]
calibrate_start_x = 27
calibrate_end_x = 280
calibrate_y = 150
z_compensations = 0.117448, -0.035990, -0.081458
compensation_start_x = 27.0
compensation_end_x = 280.0

[bed_mesh default]
version = 1
points = 
	-0.208910, -0.126374, -0.144933, -0.196749, -0.302378
	-0.057504, -0.027156, -0.051808, -0.131593, -0.236440
	-0.010472, 0.019251, -0.030401, -0.110187, -0.239097
	-0.051566, -0.029031, -0.072276, -0.170031, -0.295503
	-0.170941, -0.080124, -0.113839, -0.225656, -0.404409
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = bicubic
tension = 0.2
min_x = 30.0
max_x = 270.0
min_y = 30.0
max_y = 270.0
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 139676232582912: New connection
webhooks client 139676232582912: Client info {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
Loaded MCU 'mcu' 107 commands (v0.11.0-248-gd725dfd3 / gcc: (15:10.3-2021.07-4) 10.3.1 20210621 (release) binutils: (2.38-3ubuntu1+15build1) 2.38)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_crystal=PF0,PF1 RESERVE_PINS_serial=PA3,PA2 SERIAL_BAUD=115200 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (3.0, 50.0)     | (30.0, 30.0)
  1   | (63.0, 50.0)    | (90.0, 30.0)
  2   | (123.0, 50.0)   | (150.0, 30.0)
  3   | (183.0, 50.0)   | (210.0, 30.0)
  4   | (243.0, 50.0)   | (270.0, 30.0)
  5   | (243.0, 110.0)  | (270.0, 90.0)
  6   | (183.0, 110.0)  | (210.0, 90.0)
  7   | (123.0, 110.0)  | (150.0, 90.0)
  8   | (63.0, 110.0)   | (90.0, 90.0)
  9   | (3.0, 110.0)    | (30.0, 90.0)
  10  | (3.0, 170.0)    | (30.0, 150.0)
  11  | (63.0, 170.0)   | (90.0, 150.0)
  12  | (123.0, 170.0)  | (150.0, 150.0)
  13  | (183.0, 170.0)  | (210.0, 150.0)
  14  | (243.0, 170.0)  | (270.0, 150.0)
  15  | (243.0, 230.0)  | (270.0, 210.0)
  16  | (183.0, 230.0)  | (210.0, 210.0)
  17  | (123.0, 230.0)  | (150.0, 210.0)
  18  | (63.0, 230.0)   | (90.0, 210.0)
  19  | (3.0, 230.0)    | (30.0, 210.0)
  20  | (3.0, 290.0)    | (30.0, 270.0)
  21  | (63.0, 290.0)   | (90.0, 270.0)
  22  | (123.0, 290.0)  | (150.0, 270.0)
  23  | (183.0, 290.0)  | (210.0, 270.0)
  24  | (243.0, 290.0)  | (270.0, 270.0)
Starting heater checks for extruder
Write g-code response
Traceback (most recent call last):
  File "/home/tech/klipper/klippy/gcode.py", line 446, in _respond_raw
    os.write(self.fd, (msg+"\n").encode())
BlockingIOError: [Errno 11] Resource temporarily unavailable
Stats 264811.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2248 bytes_read=5514 bytes_retransmit=0 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64004209  heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.00 cputime=884.350 memavail=3469120 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 139676232582912
webhooks: registering remote method 'reboot_machine' for connection id: 139676232582912
webhooks: registering remote method 'pause_job_queue' for connection id: 139676232582912
webhooks: registering remote method 'start_job_queue' for connection id: 139676232582912
Stats 264812.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2254 bytes_read=5575 bytes_retransmit=0 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64003167  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.358 memavail=3469124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.0 pwm=0.000
Unknown command:"SET_FILAMENT_SENSOR"
Stats 264813.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2275 bytes_read=5716 bytes_retransmit=0 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000224  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.365 memavail=3469124 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.7 pwm=0.000
Stats 264814.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2281 bytes_read=5822 bytes_retransmit=0 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999423  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.369 memavail=3469128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000
Stats 264815.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2287 bytes_read=5943 bytes_retransmit=0 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999146  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.373 memavail=3469128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.5 pwm=0.000
Stats 264816.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2293 bytes_read=6064 bytes_retransmit=0 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999111  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.378 memavail=3469128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000
Stats 264817.4: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000033 mcu_task_stddev=0.000039 bytes_write=2299 bytes_read=6170 bytes_retransmit=0 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999130  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.382 memavail=3469128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.0 pwm=0.000
Stats 264818.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2311 bytes_read=6320 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999136  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.387 memavail=3469128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.9 pwm=0.000
Stats 264819.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2317 bytes_read=6441 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999148  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.391 memavail=3469128 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.6 pwm=0.000
Stats 264820.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2323 bytes_read=6547 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.395 memavail=3469132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.4 pwm=0.000
Stats 264821.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2329 bytes_read=6668 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999359  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.400 memavail=3469132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.2 pwm=0.000
Stats 264822.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2335 bytes_read=6789 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999287  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.404 memavail=3469252 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.0 pwm=0.000
Stats 264823.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2341 bytes_read=6908 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999254  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.408 memavail=3469256 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000
Stats 264824.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2347 bytes_read=7029 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999245  heater_bed: target=0 temp=36.6 pwm=0.000 sysload=0.00 cputime=884.413 memavail=3469264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.7 pwm=0.000
Stats 264825.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2353 bytes_read=7150 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.417 memavail=3469264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 264826.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2359 bytes_read=7256 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999163  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.00 cputime=884.421 memavail=3469264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.3 pwm=0.000
Stats 264827.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2365 bytes_read=7377 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999162  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.426 memavail=3469264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.2 pwm=0.000
Stats 264828.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2371 bytes_read=7511 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999224  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.430 memavail=3469264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.9 pwm=0.000
Stats 264829.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2377 bytes_read=7617 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999208  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.00 cputime=884.434 memavail=3469264 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.8 pwm=0.000
Stats 264830.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2383 bytes_read=7738 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999215  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.00 cputime=884.439 memavail=3469268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.6 pwm=0.000
Stats 264831.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2389 bytes_read=7859 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999206  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.00 cputime=884.443 memavail=3469268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.4 pwm=0.000
Stats 264832.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2395 bytes_read=7965 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999202  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.448 memavail=3469268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 264833.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2401 bytes_read=8099 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.452 memavail=3469268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.0 pwm=0.000
Stats 264834.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2407 bytes_read=8220 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999182  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.00 cputime=884.456 memavail=3469276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 264835.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2413 bytes_read=8326 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999187  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.08 cputime=884.461 memavail=3469276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.8 pwm=0.000
Stats 264836.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2419 bytes_read=8447 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.08 cputime=884.465 memavail=3469276 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 264837.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2425 bytes_read=8568 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999170  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.08 cputime=884.470 memavail=3469284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.3 pwm=0.000
Stats 264838.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2431 bytes_read=8674 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999189  heater_bed: target=0 temp=36.4 pwm=0.000 sysload=0.08 cputime=884.474 memavail=3469284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.2 pwm=0.000
Stats 264839.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2437 bytes_read=8808 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999180  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.08 cputime=884.478 memavail=3469284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.0 pwm=0.000
Stats 264840.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2443 bytes_read=8929 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999165  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.07 cputime=884.483 memavail=3469284 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.9 pwm=0.000
Stats 264841.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2449 bytes_read=9035 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999164  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.07 cputime=884.487 memavail=3469292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 264842.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2455 bytes_read=9156 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999155  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.07 cputime=884.491 memavail=3469292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.6 pwm=0.000
Stats 264843.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2461 bytes_read=9277 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999160  heater_bed: target=0 temp=36.7 pwm=0.000 sysload=0.07 cputime=884.496 memavail=3469292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000
Stats 264844.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2467 bytes_read=9396 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999161  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.07 cputime=884.500 memavail=3469292 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.3 pwm=0.000
Stats 264845.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2473 bytes_read=9517 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999206  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.07 cputime=884.504 memavail=3469304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.1 pwm=0.000
Stats 264846.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2479 bytes_read=9638 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.07 cputime=884.509 memavail=3469304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000
Stats 264847.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2485 bytes_read=9744 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999244  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.07 cputime=884.513 memavail=3469304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000
Stats 264848.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2491 bytes_read=9865 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999232  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.07 cputime=884.517 memavail=3469304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.7 pwm=0.000
Stats 264849.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2497 bytes_read=9999 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999228  heater_bed: target=0 temp=36.5 pwm=0.000 sysload=0.07 cputime=884.522 memavail=3469304 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.5 pwm=0.000
Stats 264850.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2503 bytes_read=10105 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.06 cputime=884.526 memavail=3469308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.2 pwm=0.000
Stats 264851.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2509 bytes_read=10226 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999199  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.06 cputime=884.530 memavail=3469308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.1 pwm=0.000
Stats 264852.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2515 bytes_read=10347 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.06 cputime=884.535 memavail=3469316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.9 pwm=0.000
Stats 264853.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2521 bytes_read=10453 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.06 cputime=884.539 memavail=3469316 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.7 pwm=0.000
Stats 264854.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2527 bytes_read=10587 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999196  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.06 cputime=884.543 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.7 pwm=0.000
Stats 264855.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2533 bytes_read=10708 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999189  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.06 cputime=884.548 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.4 pwm=0.000
Stats 264856.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2539 bytes_read=10814 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.06 cputime=884.552 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.3 pwm=0.000
Stats 264857.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2545 bytes_read=10935 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999188  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.06 cputime=884.556 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.2 pwm=0.000
Stats 264858.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2551 bytes_read=11056 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999175  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.06 cputime=884.561 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.1 pwm=0.000
Stats 264859.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2557 bytes_read=11175 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999171  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.06 cputime=884.565 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 264860.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2563 bytes_read=11296 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999166  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.05 cputime=884.569 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.8 pwm=0.000
Stats 264861.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2569 bytes_read=11417 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999162  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.05 cputime=884.573 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.6 pwm=0.000
Stats 264862.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2575 bytes_read=11523 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999156  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.05 cputime=884.578 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 264863.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2581 bytes_read=11644 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999155  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.05 cputime=884.582 memavail=3469328 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.3 pwm=0.000
Stats 264864.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2587 bytes_read=11778 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999149  heater_bed: target=0 temp=36.3 pwm=0.000 sysload=0.05 cputime=884.587 memavail=3469332 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.1 pwm=0.000
Stats 264865.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2593 bytes_read=11884 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999146  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.05 cputime=884.591 memavail=3469336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.0 pwm=0.000
Stats 264866.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2599 bytes_read=12005 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999143  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.05 cputime=884.595 memavail=3469336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 264867.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2605 bytes_read=12126 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999143  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.05 cputime=884.600 memavail=3469336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 264868.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2611 bytes_read=12232 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999144  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.05 cputime=884.603 memavail=3469336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.6 pwm=0.000
Stats 264869.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2617 bytes_read=12366 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999140  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.05 cputime=884.608 memavail=3469336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.4 pwm=0.000
Stats 264870.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2623 bytes_read=12487 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999139  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.04 cputime=884.612 memavail=3469340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.2 pwm=0.000
Stats 264871.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2629 bytes_read=12593 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999136  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.04 cputime=884.616 memavail=3469340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.1 pwm=0.000
Stats 264872.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2635 bytes_read=12714 bytes_retransmit=0 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999131  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.04 cputime=884.621 memavail=3469340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.0 pwm=0.000
Stats 264873.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2641 bytes_read=12835 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999138  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.04 cputime=884.625 memavail=3469340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.9 pwm=0.000
Stats 264874.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2647 bytes_read=12950 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999156  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.04 cputime=884.629 memavail=3469340 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000
Stats 264875.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2653 bytes_read=13062 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999159  heater_bed: target=0 temp=36.2 pwm=0.000 sysload=0.04 cputime=884.633 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 264876.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2659 bytes_read=13175 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999153  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.04 cputime=884.638 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 264877.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2665 bytes_read=13274 bytes_retransmit=0 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999152  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.04 cputime=884.642 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 264878.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2671 bytes_read=13405 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999149  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.04 cputime=884.646 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.3 pwm=0.000
Stats 264879.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=2683 bytes_read=13524 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=261 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999143  heater_bed: target=0 temp=36.1 pwm=0.000 sysload=0.04 cputime=884.651 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.1 pwm=0.000
Stats 264880.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=2689 bytes_read=13646 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999136  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.04 cputime=884.655 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 264881.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=2695 bytes_read=13782 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999129  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.04 cputime=884.660 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 264882.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=2701 bytes_read=13888 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999122  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.04 cputime=884.664 memavail=3469344 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.8 pwm=0.000
Stats 264883.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=2707 bytes_read=13994 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999120  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.04 cputime=884.668 memavail=3469348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.6 pwm=0.000
Stats 264884.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2713 bytes_read=14143 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999119  heater_bed: target=0 temp=36.0 pwm=0.000 sysload=0.04 cputime=884.673 memavail=3469348 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.4 pwm=0.000
Stats 264885.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2719 bytes_read=14249 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999115  heater_bed: target=0 temp=35.8 pwm=0.000 sysload=0.03 cputime=884.677 memavail=3469352 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.3 pwm=0.000
Stats 264886.4: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=2725 bytes_read=14355 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999115  heater_bed: target=0 temp=35.9 pwm=0.000 sysload=0.03 cputime=884.682 memavail=3469356 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.2 pwm=0.000
Heater extruder approaching new target of 100.000
Stats 264971.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3270 bytes_read=24450 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999098  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.01 cputime=885.030 memavail=3469180 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=43.7 pwm=1.000
Stats 264972.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3301 bytes_read=24561 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999097  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.01 cputime=885.035 memavail=3469180 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=43.7 pwm=1.000
Stats 264973.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3307 bytes_read=24682 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999096  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.01 cputime=885.039 memavail=3469180 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=43.8 pwm=1.000
Stats 264974.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3313 bytes_read=24803 bytes_retransmit=0 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999094  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.01 cputime=885.043 memavail=3469180 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=45.1 pwm=1.000
Stats 264975.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=3335 bytes_read=24927 bytes_retransmit=0 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999090  heater_bed: target=0 temp=35.3 pwm=0.000 sysload=0.00 cputime=885.048 memavail=3469180 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=47.0 pwm=1.000
Stats 264976.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=3341 bytes_read=25048 bytes_retransmit=0 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999086  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.00 cputime=885.052 memavail=3469180 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=49.3 pwm=1.000
Stats 264977.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=3347 bytes_read=25169 bytes_retransmit=0 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999086  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.056 memavail=3469196 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=52.8 pwm=1.000
Stats 264978.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=3353 bytes_read=25275 bytes_retransmit=0 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999088  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.061 memavail=3469196 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=55.8 pwm=1.000
Stats 264979.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000013 bytes_write=3375 bytes_read=25401 bytes_retransmit=0 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999087  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.00 cputime=885.065 memavail=3469196 print_time=162.989 buffer_time=0.000 print_stall=0 extruder: target=100 temp=58.8 pwm=1.000
Stats 264980.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3381 bytes_read=25535 bytes_retransmit=0 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999084  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.070 memavail=3469196 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=62.9 pwm=1.000
Stats 264981.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3387 bytes_read=25641 bytes_retransmit=0 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999084  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.075 memavail=3469196 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=66.0 pwm=1.000
Stats 264982.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3393 bytes_read=25762 bytes_retransmit=0 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999084  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.00 cputime=885.079 memavail=3469204 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.2 pwm=1.000
Stats 264983.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3415 bytes_read=25888 bytes_retransmit=0 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999083  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.083 memavail=3469044 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=73.2 pwm=1.000
Stats 264984.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3421 bytes_read=25994 bytes_retransmit=0 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999084  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.087 memavail=3469044 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=76.3 pwm=1.000
Stats 264985.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3427 bytes_read=26128 bytes_retransmit=0 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999093  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.092 memavail=3469044 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=79.3 pwm=1.000
Stats 264986.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3433 bytes_read=26249 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999091  heater_bed: target=0 temp=35.2 pwm=0.000 sysload=0.00 cputime=885.096 memavail=3469044 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.3 pwm=1.000
Stats 264987.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3439 bytes_read=26355 bytes_retransmit=0 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999091  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.101 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=86.3 pwm=1.000
Stats 264988.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3461 bytes_read=26481 bytes_retransmit=0 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999090  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.105 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=89.2 pwm=1.000
Stats 264989.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3467 bytes_read=26602 bytes_retransmit=0 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999089  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.00 cputime=885.109 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=93.1 pwm=1.000
Stats 264990.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3473 bytes_read=26708 bytes_retransmit=0 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999089  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.113 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=96.0 pwm=1.000
Stats 264991.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3479 bytes_read=26842 bytes_retransmit=0 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999089  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.00 cputime=885.118 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=98.8 pwm=1.000
Stats 264992.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3501 bytes_read=26968 bytes_retransmit=0 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999091  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.122 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=102.5 pwm=1.000
Stats 264993.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3507 bytes_read=27074 bytes_retransmit=0 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999091  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.127 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=105.3 pwm=1.000
Stats 264994.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3513 bytes_read=27195 bytes_retransmit=0 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999093  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.131 memavail=3469084 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=108.0 pwm=1.000
Stats 264995.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3519 bytes_read=27316 bytes_retransmit=0 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999095  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.135 memavail=3469088 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=111.6 pwm=1.000
Stats 264996.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3541 bytes_read=27440 bytes_retransmit=0 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999091  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.140 memavail=3469088 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=114.3 pwm=1.000
Stats 264997.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3547 bytes_read=27561 bytes_retransmit=0 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999096  heater_bed: target=0 temp=35.1 pwm=0.000 sysload=0.00 cputime=885.144 memavail=3469088 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=116.9 pwm=1.000
Stats 264998.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3553 bytes_read=27682 bytes_retransmit=0 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999097  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.149 memavail=3469088 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=120.4 pwm=1.000
Stats 264999.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3559 bytes_read=27788 bytes_retransmit=0 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999098  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.153 memavail=3469088 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=123.0 pwm=1.000
Stats 265000.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3581 bytes_read=27914 bytes_retransmit=0 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999098  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.157 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=125.5 pwm=1.000
Stats 265001.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3587 bytes_read=28047 bytes_retransmit=0 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999098  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.162 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=129.0 pwm=1.000
Stats 265002.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3599 bytes_read=28166 bytes_retransmit=0 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999106  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.166 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=131.4 pwm=1.000
Stats 265003.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3605 bytes_read=28284 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999107  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.171 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=133.9 pwm=1.000
Stats 265004.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3627 bytes_read=28406 bytes_retransmit=0 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999107  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.175 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=137.2 pwm=1.000
Stats 265005.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3633 bytes_read=28509 bytes_retransmit=0 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999108  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.179 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=139.6 pwm=1.000
Stats 265006.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3639 bytes_read=28654 bytes_retransmit=0 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999108  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.184 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=142.7 pwm=1.000
Stats 265007.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3645 bytes_read=28757 bytes_retransmit=0 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999107  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.188 memavail=3469096 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=145.1 pwm=1.000
Stats 265008.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3651 bytes_read=28855 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999109  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.192 memavail=3469100 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=147.4 pwm=1.000
Stats 265009.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3673 bytes_read=28983 bytes_retransmit=0 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999113  heater_bed: target=0 temp=34.9 pwm=0.000 sysload=0.00 cputime=885.197 memavail=3469104 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=150.6 pwm=1.000
Stats 265010.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3679 bytes_read=29079 bytes_retransmit=0 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999113  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.201 memavail=3469104 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=152.9 pwm=1.000
Stats 265011.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3685 bytes_read=29188 bytes_retransmit=0 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999112  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.206 memavail=3469104 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=155.3 pwm=1.000
Stats 265012.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3691 bytes_read=29315 bytes_retransmit=0 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999114  heater_bed: target=0 temp=35.0 pwm=0.000 sysload=0.00 cputime=885.210 memavail=3469104 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=158.4 pwm=1.000
Stats 265013.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3713 bytes_read=29423 bytes_retransmit=0 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999115  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.215 memavail=3469104 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=160.6 pwm=1.000
Stats 265014.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3719 bytes_read=29526 bytes_retransmit=0 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999114  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.219 memavail=3469104 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=162.9 pwm=1.000
Stats 265015.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3725 bytes_read=29658 bytes_retransmit=0 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999115  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.223 memavail=3469108 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=166.0 pwm=1.000
Stats 265016.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3731 bytes_read=29774 bytes_retransmit=0 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999118  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.227 memavail=3469112 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=168.2 pwm=1.000
Stats 265017.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3753 bytes_read=29897 bytes_retransmit=0 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999124  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.232 memavail=3469112 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=170.3 pwm=1.000
Stats 265018.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3759 bytes_read=30014 bytes_retransmit=0 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999124  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.236 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=173.4 pwm=1.000
Stats 265019.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3765 bytes_read=30117 bytes_retransmit=0 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999127  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.240 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=175.5 pwm=1.000
Stats 265020.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3771 bytes_read=30235 bytes_retransmit=0 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999133  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.245 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.7 pwm=1.000
Stats 265021.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3788 bytes_read=30365 bytes_retransmit=0 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999129  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.249 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.5 pwm=1.000
Stats 265022.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3794 bytes_read=30468 bytes_retransmit=0 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999130  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.254 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.7 pwm=1.000
Stats 265023.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3848 bytes_read=30601 bytes_retransmit=0 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999132  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.258 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.8 pwm=0.920
Stats 265024.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3886 bytes_read=30728 bytes_retransmit=0 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=63999132  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.263 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.5 pwm=0.828
Stats 265025.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=3940 bytes_read=30846 bytes_retransmit=0 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=0 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999134  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.268 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.1 pwm=0.834
Stats 265026.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=3962 bytes_read=30983 bytes_retransmit=0 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=0 srtt=0.005 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999134  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.272 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.3 pwm=0.894
Stats 265027.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=3984 bytes_read=31105 bytes_retransmit=0 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999133  heater_bed: target=0 temp=34.8 pwm=0.000 sysload=0.00 cputime=885.277 memavail=3469116 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.4 pwm=1.000
Stats 265028.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=3990 bytes_read=31208 bytes_retransmit=0 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999147  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.281 memavail=3469120 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.4 pwm=1.000
Stats 265029.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=3996 bytes_read=31326 bytes_retransmit=0 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999149  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.285 memavail=3469120 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.9 pwm=1.000
Stats 265030.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000012 bytes_write=4002 bytes_read=31443 bytes_retransmit=0 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999153  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.289 memavail=3469120 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.0 pwm=1.000
Stats 265031.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4024 bytes_read=31564 bytes_retransmit=0 bytes_invalid=0 send_seq=441 receive_seq=441 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999148  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.294 memavail=3469120 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=188.3 pwm=1.000
Stats 265032.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4030 bytes_read=31682 bytes_retransmit=0 bytes_invalid=0 send_seq=442 receive_seq=442 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999148  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.298 memavail=3469124 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.3 pwm=1.000
Stats 265033.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4036 bytes_read=31799 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999152  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.303 memavail=3469124 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=185.9 pwm=1.000
Stats 265034.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4042 bytes_read=31902 bytes_retransmit=0 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999175  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.307 memavail=3469124 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.8 pwm=1.000
Stats 265035.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4064 bytes_read=32025 bytes_retransmit=0 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999178  heater_bed: target=0 temp=34.7 pwm=0.000 sysload=0.00 cputime=885.311 memavail=3469124 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.7 pwm=1.000
Stats 265036.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4070 bytes_read=32155 bytes_retransmit=0 bytes_invalid=0 send_seq=447 receive_seq=447 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999179  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.316 memavail=3469128 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.4 pwm=1.000
Stats 265037.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4076 bytes_read=32258 bytes_retransmit=0 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.320 memavail=3469128 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.1 pwm=1.000
Stats 265038.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4082 bytes_read=32376 bytes_retransmit=0 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999188  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.324 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.0 pwm=1.000
Stats 265039.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4104 bytes_read=32498 bytes_retransmit=0 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.00 cputime=885.329 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.6 pwm=1.000
Stats 265040.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4110 bytes_read=32601 bytes_retransmit=0 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.333 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.5 pwm=1.000
Stats 265041.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4116 bytes_read=32732 bytes_retransmit=0 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999187  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.338 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=176.4 pwm=1.000
Stats 265042.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4122 bytes_read=32849 bytes_retransmit=0 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999186  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.342 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=175.1 pwm=1.000
Stats 265043.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4144 bytes_read=32957 bytes_retransmit=0 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999186  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.346 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=174.0 pwm=1.000
Stats 265044.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4150 bytes_read=33075 bytes_retransmit=0 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999184  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.351 memavail=3469132 print_time=172.093 buffer_time=0.000 print_stall=0 extruder: target=200 temp=172.9 pwm=1.000
Stats 265045.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4169 bytes_read=33197 bytes_retransmit=0 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999180  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.356 memavail=3469132 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.6 pwm=0.000
Stats 265046.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4188 bytes_read=33318 bytes_retransmit=0 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999183  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.360 memavail=3469132 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.5 pwm=0.000
Stats 265047.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4194 bytes_read=33436 bytes_retransmit=0 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999183  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.365 memavail=3469144 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.6 pwm=0.000
Stats 265048.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4200 bytes_read=33553 bytes_retransmit=0 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999182  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.00 cputime=885.369 memavail=3469152 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.4 pwm=0.000
Stats 265049.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4206 bytes_read=33656 bytes_retransmit=0 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999184  heater_bed: target=0 temp=34.6 pwm=0.000 sysload=0.00 cputime=885.373 memavail=3469156 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.4 pwm=0.000
Stats 265050.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4212 bytes_read=33774 bytes_retransmit=0 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999184  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.16 cputime=885.377 memavail=3469156 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.5 pwm=0.000
Stats 265051.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4218 bytes_read=33904 bytes_retransmit=0 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.16 cputime=885.382 memavail=3469156 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.1 pwm=0.000
Stats 265052.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4224 bytes_read=34007 bytes_retransmit=0 bytes_invalid=0 send_seq=467 receive_seq=467 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999185  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.16 cputime=885.386 memavail=3469156 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.3 pwm=0.000
Stats 265053.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4230 bytes_read=34125 bytes_retransmit=0 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999184  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.16 cputime=885.390 memavail=3469160 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.2 pwm=0.000
Stats 265054.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4236 bytes_read=34242 bytes_retransmit=0 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999192  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.16 cputime=885.395 memavail=3469160 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.0 pwm=0.000
Stats 265055.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4242 bytes_read=34345 bytes_retransmit=0 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999193  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.15 cputime=885.399 memavail=3469160 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.1 pwm=0.000
Stats 265056.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4248 bytes_read=34476 bytes_retransmit=0 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999192  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.15 cputime=885.403 memavail=3469160 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.3 pwm=0.000
Stats 265057.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4254 bytes_read=34593 bytes_retransmit=0 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999192  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.15 cputime=885.407 memavail=3469160 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.2 pwm=0.000
Stats 265058.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4260 bytes_read=34696 bytes_retransmit=0 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.15 cputime=885.411 memavail=3469160 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.4 pwm=0.000
Stats 265059.5: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4266 bytes_read=34814 bytes_retransmit=0 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999193  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.15 cputime=885.416 memavail=3469164 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.4 pwm=0.000
Stats 265060.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4272 bytes_read=34931 bytes_retransmit=0 bytes_invalid=0 send_seq=475 receive_seq=475 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999192  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.13 cputime=885.420 memavail=3469164 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.4 pwm=0.000
Stats 265061.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4278 bytes_read=35034 bytes_retransmit=0 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.13 cputime=885.424 memavail=3469164 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.5 pwm=0.000
Stats 265062.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4284 bytes_read=35165 bytes_retransmit=0 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999196  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.13 cputime=885.429 memavail=3469164 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.7 pwm=0.000
Stats 265063.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4290 bytes_read=35282 bytes_retransmit=0 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=1 freq=63999194  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.13 cputime=885.433 memavail=3469392 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.6 pwm=0.000
Stats 265064.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4302 bytes_read=35401 bytes_retransmit=0 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.13 cputime=885.437 memavail=3469432 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.9 pwm=0.000
Stats 265065.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4308 bytes_read=35519 bytes_retransmit=0 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999201  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.12 cputime=885.442 memavail=3469432 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.0 pwm=0.000
Stats 265066.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4314 bytes_read=35636 bytes_retransmit=0 bytes_invalid=0 send_seq=482 receive_seq=482 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999192  heater_bed: target=0 temp=34.5 pwm=0.000 sysload=0.12 cputime=885.446 memavail=3469432 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.0 pwm=0.000
Stats 265067.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4320 bytes_read=35752 bytes_retransmit=0 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.12 cputime=885.450 memavail=3469432 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.3 pwm=0.000
Stats 265068.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4326 bytes_read=35870 bytes_retransmit=0 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999191  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.12 cputime=885.455 memavail=3469432 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.5 pwm=0.000
Stats 265069.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4332 bytes_read=35987 bytes_retransmit=0 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.12 cputime=885.459 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.6 pwm=0.000
Stats 265070.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4338 bytes_read=36090 bytes_retransmit=0 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999191  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.11 cputime=885.463 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.7 pwm=0.000
Stats 265071.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4344 bytes_read=36208 bytes_retransmit=0 bytes_invalid=0 send_seq=487 receive_seq=487 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.11 cputime=885.467 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.9 pwm=0.000
Stats 265072.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4350 bytes_read=36338 bytes_retransmit=0 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999186  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.11 cputime=885.472 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.0 pwm=0.000
Stats 265073.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4356 bytes_read=36441 bytes_retransmit=0 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999193  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.11 cputime=885.476 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.3 pwm=0.000
Stats 265074.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4362 bytes_read=36559 bytes_retransmit=0 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.11 cputime=885.480 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.5 pwm=0.000
Stats 265075.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4368 bytes_read=36671 bytes_retransmit=0 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999197  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.10 cputime=885.485 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.6 pwm=0.000
Stats 265076.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4374 bytes_read=36767 bytes_retransmit=0 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.10 cputime=885.489 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.9 pwm=0.000
Stats 265077.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4380 bytes_read=36890 bytes_retransmit=0 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.10 cputime=885.493 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.2 pwm=0.000
Stats 265078.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4386 bytes_read=36999 bytes_retransmit=0 bytes_invalid=0 send_seq=494 receive_seq=494 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999196  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.10 cputime=885.498 memavail=3469440 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.2 pwm=0.000
Stats 265079.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4392 bytes_read=37097 bytes_retransmit=0 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.10 cputime=885.502 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.6 pwm=0.000
Stats 265080.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4398 bytes_read=37215 bytes_retransmit=0 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.10 cputime=885.506 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.9 pwm=0.000
Stats 265081.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4404 bytes_read=37332 bytes_retransmit=0 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999221  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.10 cputime=885.510 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.0 pwm=0.000
Stats 265082.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=4410 bytes_read=37448 bytes_retransmit=0 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999219  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.10 cputime=885.514 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.4 pwm=0.000
Stats 265083.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=4416 bytes_read=37566 bytes_retransmit=0 bytes_invalid=0 send_seq=499 receive_seq=499 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999218  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.10 cputime=885.519 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.8 pwm=0.000
Stats 265084.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=4422 bytes_read=37683 bytes_retransmit=0 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999217  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.10 cputime=885.523 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.9 pwm=0.000
Stats 265085.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=4428 bytes_read=37786 bytes_retransmit=0 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999216  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.09 cputime=885.527 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.2 pwm=0.000
Stats 265086.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000015 mcu_task_stddev=0.000012 bytes_write=4434 bytes_read=37904 bytes_retransmit=0 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999218  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.09 cputime=885.532 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.6 pwm=0.000
Stats 265087.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4440 bytes_read=38034 bytes_retransmit=0 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999215  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.09 cputime=885.536 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.8 pwm=0.000
Stats 265088.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4446 bytes_read=38137 bytes_retransmit=0 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999214  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.09 cputime=885.540 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.1 pwm=0.000
Stats 265089.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4452 bytes_read=38255 bytes_retransmit=0 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999213  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.09 cputime=885.545 memavail=3469452 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.5 pwm=0.000
Stats 265090.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4458 bytes_read=38372 bytes_retransmit=0 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999213  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.08 cputime=885.549 memavail=3469460 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.7 pwm=0.000
Stats 265091.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4464 bytes_read=38475 bytes_retransmit=0 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999212  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.08 cputime=885.553 memavail=3469460 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.1 pwm=0.000
Stats 265092.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4470 bytes_read=38606 bytes_retransmit=0 bytes_invalid=0 send_seq=508 receive_seq=508 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999213  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.08 cputime=885.558 memavail=3469460 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.5 pwm=0.000
Stats 265093.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4476 bytes_read=38723 bytes_retransmit=0 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999215  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.08 cputime=885.562 memavail=3469460 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.7 pwm=0.000
Stats 265094.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4482 bytes_read=38826 bytes_retransmit=0 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=0 srtt=0.007 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999215  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.08 cputime=885.566 memavail=3469460 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.1 pwm=0.000
Stats 265095.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4488 bytes_read=38944 bytes_retransmit=0 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999214  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.07 cputime=885.571 memavail=3469460 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.5 pwm=0.000
Stats 265096.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4494 bytes_read=39061 bytes_retransmit=0 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999216  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.07 cputime=885.575 memavail=3469720 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.7 pwm=0.000
Stats 265097.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4500 bytes_read=39180 bytes_retransmit=0 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999214  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.07 cputime=885.580 memavail=3470488 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.2 pwm=0.000
Stats 265098.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4506 bytes_read=39301 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999214  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.07 cputime=885.584 memavail=3470488 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.6 pwm=0.000
Stats 265099.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4512 bytes_read=39422 bytes_retransmit=0 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999212  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.07 cputime=885.588 memavail=3470488 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.8 pwm=0.000
Stats 265100.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4518 bytes_read=39528 bytes_retransmit=0 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999216  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.07 cputime=885.593 memavail=3470492 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.3 pwm=0.000
Stats 265101.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4524 bytes_read=39649 bytes_retransmit=0 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999215  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.07 cputime=885.597 memavail=3470492 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.6 pwm=0.000
Stats 265102.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4530 bytes_read=39783 bytes_retransmit=0 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999214  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.07 cputime=885.601 memavail=3470496 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.9 pwm=0.000
Stats 265103.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4536 bytes_read=39889 bytes_retransmit=0 bytes_invalid=0 send_seq=519 receive_seq=519 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999213  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.07 cputime=885.606 memavail=3470496 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.4 pwm=0.000
Stats 265104.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4542 bytes_read=40010 bytes_retransmit=0 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999210  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.07 cputime=885.610 memavail=3470500 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.8 pwm=0.000
Stats 265105.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4548 bytes_read=40131 bytes_retransmit=0 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999207  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.06 cputime=885.615 memavail=3470500 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.1 pwm=0.000
Stats 265106.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4554 bytes_read=40237 bytes_retransmit=0 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999207  heater_bed: target=0 temp=34.4 pwm=0.000 sysload=0.06 cputime=885.619 memavail=3470500 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.5 pwm=0.000
Stats 265107.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4560 bytes_read=40371 bytes_retransmit=0 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999207  heater_bed: target=0 temp=33.8 pwm=0.000 sysload=0.06 cputime=885.623 memavail=3470500 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.0 pwm=0.000
Stats 265108.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4566 bytes_read=40492 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999207  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.06 cputime=885.628 memavail=3470500 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.3 pwm=0.000
Stats 265109.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4572 bytes_read=40598 bytes_retransmit=0 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999207  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.06 cputime=885.632 memavail=3470500 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.8 pwm=0.000
Stats 265110.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4578 bytes_read=40719 bytes_retransmit=0 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999211  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.06 cputime=885.636 memavail=3470540 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.2 pwm=0.000
Stats 265111.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4584 bytes_read=40840 bytes_retransmit=0 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999208  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.06 cputime=885.641 memavail=3470580 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.5 pwm=0.000
Stats 265112.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4590 bytes_read=40959 bytes_retransmit=0 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999206  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.06 cputime=885.645 memavail=3470580 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.1 pwm=0.000
Stats 265113.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4596 bytes_read=41080 bytes_retransmit=0 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999204  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.06 cputime=885.649 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.5 pwm=0.000
Stats 265114.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4602 bytes_read=41201 bytes_retransmit=0 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999209  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.06 cputime=885.654 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.8 pwm=0.000
Stats 265115.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4608 bytes_read=41307 bytes_retransmit=0 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999207  heater_bed: target=0 temp=34.1 pwm=0.000 sysload=0.05 cputime=885.658 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.3 pwm=0.000
Stats 265116.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4614 bytes_read=41428 bytes_retransmit=0 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999205  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.05 cputime=885.662 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.9 pwm=0.000
Stats 265117.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4620 bytes_read=41562 bytes_retransmit=0 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999204  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.05 cputime=885.667 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.1 pwm=0.000
Stats 265118.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4626 bytes_read=41668 bytes_retransmit=0 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.05 cputime=885.671 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.6 pwm=0.000
Stats 265119.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4632 bytes_read=41789 bytes_retransmit=0 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999202  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.05 cputime=885.675 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.2 pwm=0.000
Stats 265120.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4638 bytes_read=41910 bytes_retransmit=0 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999202  heater_bed: target=0 temp=34.3 pwm=0.000 sysload=0.05 cputime=885.680 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.5 pwm=0.000
Stats 265121.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4644 bytes_read=42016 bytes_retransmit=0 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999203  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.05 cputime=885.684 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.0 pwm=0.000
Stats 265122.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4650 bytes_read=42150 bytes_retransmit=0 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999201  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.05 cputime=885.688 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.6 pwm=0.000
Stats 265123.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4656 bytes_read=42271 bytes_retransmit=0 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999196  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.05 cputime=885.693 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.9 pwm=0.000
Stats 265124.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4662 bytes_read=42377 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.05 cputime=885.697 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.4 pwm=0.000
Stats 265125.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4674 bytes_read=42529 bytes_retransmit=0 bytes_invalid=0 send_seq=542 receive_seq=542 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.04 cputime=885.702 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.8 pwm=0.000
Stats 265126.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4680 bytes_read=42635 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999200  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.04 cputime=885.706 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.3 pwm=0.000
Stats 265127.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4686 bytes_read=42754 bytes_retransmit=0 bytes_invalid=0 send_seq=544 receive_seq=544 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999198  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.04 cputime=885.710 memavail=3470588 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.9 pwm=0.000
Stats 265128.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4692 bytes_read=42890 bytes_retransmit=0 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999196  heater_bed: target=0 temp=33.8 pwm=0.000 sysload=0.04 cputime=885.714 memavail=3470744 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.3 pwm=0.000
Stats 265129.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4698 bytes_read=42996 bytes_retransmit=0 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=0 srtt=0.006 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999195  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.04 cputime=885.718 memavail=3470848 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.8 pwm=0.000
Stats 265130.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4704 bytes_read=43102 bytes_retransmit=0 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=0 srtt=0.006 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999194  heater_bed: target=0 temp=34.0 pwm=0.000 sysload=0.04 cputime=885.723 memavail=3470852 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.2 pwm=0.000
Stats 265131.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4710 bytes_read=43238 bytes_retransmit=0 bytes_invalid=0 send_seq=548 receive_seq=548 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999190  heater_bed: target=0 temp=34.2 pwm=0.000 sysload=0.04 cputime=885.727 memavail=3470852 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.7 pwm=0.000
Stats 265132.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4716 bytes_read=43357 bytes_retransmit=0 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999188  heater_bed: target=0 temp=33.8 pwm=0.000 sysload=0.04 cputime=885.731 memavail=3470852 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.3 pwm=0.000
Stats 265133.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4722 bytes_read=43463 bytes_retransmit=0 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999184  heater_bed: target=0 temp=33.8 pwm=0.000 sysload=0.04 cputime=885.736 memavail=3470852 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.9 pwm=0.000
Stats 265134.6: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000016 mcu_task_stddev=0.000012 bytes_write=4728 bytes_read=43599 bytes_retransmit=0 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=0 srtt=0.007 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999189  heater_bed: target=0 temp=33.9 pwm=0.000 sysload=0.04 cputime=885.740 memavail=3470852 print_time=237.044 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.3 pwm=0.000