--------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-03-11 10:25:29,602 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-03-11 10:25:29,998 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-03-11 10:25:30,001 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-03-11 10:25:30,036 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-11 10:25:30,038 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-03-11 10:25:30,041 [config.py:__init__()] - Configuration validated succesfuly 2023-03-11 10:25:30,043 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-11 10:25:30,166 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-03-11 10:25:30,167 [config.py:install_language()] - Using system lang 2023-03-11 10:25:30,169 [config.py:install_language()] - Using lang en 2023-03-11 10:25:30,194 [screen.py:__init__()] - Screen resolution: 1024x600 2023-03-11 10:25:30,197 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-03-11 10:25:32,376 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-11 10:25:32,395 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-11 10:25:32,417 [screen.py:initial_connection()] - Default printer: None 2023-03-11 10:25:32,418 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-11 10:25:32,419 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-11 10:25:32,419 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-03-11 10:25:32,540 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:32,618 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:32,649 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-11 10:25:32,651 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-11 10:25:32,677 [_logging.py:info()] - Websocket connected 2023-03-11 10:25:32,677 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-11 10:25:32,736 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:32,817 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:32,818 [screen.py:init_printer()] - Klipper not connected 2023-03-11 10:25:36,556 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:36,581 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:36,605 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/printer/info 2023-03-11 10:25:39,520 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:39,548 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:39,575 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-11 10:25:39,705 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-11 10:25:39,706 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-03-11 10:25:39,707 [printer.py:reinit()] - # Extruders: 0 2023-03-11 10:25:39,707 [printer.py:reinit()] - # Temperature devices: 0 2023-03-11 10:25:39,708 [printer.py:reinit()] - # Fans: 0 2023-03-11 10:25:39,708 [printer.py:reinit()] - # Output pins: 0 2023-03-11 10:25:39,708 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-11 10:25:39,965 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-03-11 10:25:39,967 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-11 10:25:39,968 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:25:39,994 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:39,995 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:40,025 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:40,027 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:40,028 [files.py:initialize()] - Gcodes path: None 2023-03-11 10:25:40,029 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-11 10:25:40,030 [screen.py:init_printer()] - Printer initialized 2023-03-11 10:25:40,050 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:42,481 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:42,482 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:42,507 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:42,508 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:56,468 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:56,468 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:56,472 [screen.py:_load_panel()] - Loading panel: menu 2023-03-11 10:25:56,473 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-03-11 10:25:56,590 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:56,600 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:56,605 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:57,500 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:25:57,517 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:58,188 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:58,189 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:58,239 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:58,253 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:58,264 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:58,908 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:25:58,920 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:59,564 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:59,565 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:59,592 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:59,603 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:59,610 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:00,180 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:00,190 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:00,895 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:00,896 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:00,918 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:00,928 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:00,934 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:01,580 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:01,590 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:02,468 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:02,469 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:02,489 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:02,498 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:02,504 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:03,084 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:03,094 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:04,404 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:04,405 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:04,430 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:04,440 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:04,447 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:04,996 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:05,006 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:05,703 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:05,704 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:05,725 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:05,739 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:05,749 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:06,380 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:06,396 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:08,828 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:08,828 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:08,845 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:08,855 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:08,861 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:10,316 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:10,329 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:15,156 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:15,157 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:15,188 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:15,198 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:15,205 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:16,840 [screen.py:_load_panel()] - Loading panel: settings 2023-03-11 10:26:16,840 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/settings.py 2023-03-11 10:26:17,009 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > settings 2023-03-11 10:26:23,904 [screen_panel.py:on_dropdown_change()] - [main] language changed to zh_CN 2023-03-11 10:26:23,913 [config.py:install_language()] - Using lang zh_CN 2023-03-11 10:26:23,924 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:26:23,955 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:26,180 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:26,181 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:26,298 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:26,308 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:26,313 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:27,965 [screen.py:_load_panel()] - Loading panel: system 2023-03-11 10:26:27,966 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-03-11 10:26:28,037 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-03-11 10:26:28,048 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:26:28,060 [system.py:update_program_info()] - Invalid crowsnest ? 2023-03-11 10:26:28,072 [system.py:update_program_info()] - Invalid klipper ? 2023-03-11 10:26:28,076 [system.py:_already_updated()] - mainsail ? 2023-03-11 10:26:28,080 [system.py:update_program_info()] - Invalid mainsail-config ? 2023-03-11 10:26:28,091 [system.py:update_program_info()] - Invalid moonraker ? 2023-03-11 10:26:28,102 [system.py:update_program_info()] - Invalid sonar ? 2023-03-11 10:26:28,109 [system.py:update_program_info()] - Invalid timelapse ? 2023-03-11 10:26:28,123 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-03-11 10:26:28,145 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-03-11 10:26:28,146 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:26:28,152 [system.py:update_program_info()] - Invalid crowsnest ? 2023-03-11 10:26:28,156 [system.py:update_program_info()] - Invalid klipper ? 2023-03-11 10:26:28,159 [system.py:_already_updated()] - mainsail ? 2023-03-11 10:26:28,162 [system.py:update_program_info()] - Invalid mainsail-config ? 2023-03-11 10:26:28,165 [system.py:update_program_info()] - Invalid moonraker ? 2023-03-11 10:26:28,168 [system.py:update_program_info()] - Invalid sonar ? 2023-03-11 10:26:28,172 [system.py:update_program_info()] - Invalid timelapse ? 2023-03-11 10:26:31,412 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:31,429 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:31,438 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:31,444 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:32,324 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:32,341 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:33,556 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:33,557 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:33,586 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:33,597 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:33,604 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:34,249 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > settings 2023-03-11 10:26:42,354 [screen_panel.py:on_dropdown_change()] - [main] language changed to system_lang 2023-03-11 10:26:42,363 [config.py:install_language()] - Using system lang 2023-03-11 10:26:42,367 [config.py:install_language()] - Using lang en 2023-03-11 10:26:42,375 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:26:42,405 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-03-11 10:25:27,485 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-03-11 10:25:27,847 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-03-11 10:25:27,849 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-03-11 10:25:27,888 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-11 10:25:27,890 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-03-11 10:25:27,892 [config.py:__init__()] - Configuration validated succesfuly 2023-03-11 10:25:27,894 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-11 10:25:28,046 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-03-11 10:25:28,047 [config.py:install_language()] - Using system lang 2023-03-11 10:25:28,049 [config.py:install_language()] - Using lang en 2023-03-11 10:25:28,064 [screen.py:__init__()] - Screen resolution: 1024x600 2023-03-11 10:25:28,067 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-03-11 10:25:29,037 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-11 10:25:29,051 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-11 10:25:29,071 [screen.py:initial_connection()] - Default printer: None 2023-03-11 10:25:29,072 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-11 10:25:29,073 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-11 10:25:29,074 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-03-11 10:25:29,195 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:29,261 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:29,293 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-11 10:25:29,294 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-11 10:25:29,312 [_logging.py:info()] - Websocket connected 2023-03-11 10:25:29,312 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-11 10:25:29,355 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:29,390 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:29,414 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-11 10:25:29,524 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-11 10:25:29,526 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-03-11 10:25:29,526 [printer.py:reinit()] - # Extruders: 0 2023-03-11 10:25:29,526 [printer.py:reinit()] - # Temperature devices: 0 2023-03-11 10:25:29,526 [printer.py:reinit()] - # Fans: 0 2023-03-11 10:25:29,527 [printer.py:reinit()] - # Output pins: 0 2023-03-11 10:25:29,527 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-11 10:25:29,783 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-03-11 10:25:29,784 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-11 10:25:29,785 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:25:29,807 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:29,808 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:29,837 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:29,838 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:29,839 [files.py:initialize()] - Gcodes path: None 2023-03-11 10:25:29,840 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-11 10:25:29,841 [screen.py:init_printer()] - Printer initialized 2023-03-11 10:25:29,885 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:31,479 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:31,479 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:31,484 [screen.py:_load_panel()] - Loading panel: menu 2023-03-11 10:25:31,484 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-03-11 10:25:31,632 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:31,646 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:31,654 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:32,207 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:25:32,224 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:32,553 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:32,554 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:32,587 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:32,588 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:32,807 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:32,808 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:32,841 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:32,859 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:32,866 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:33,369 [screen.py:_load_panel()] - Loading panel: system 2023-03-11 10:25:33,370 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-03-11 10:25:33,459 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-03-11 10:25:33,474 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:25:33,489 [system.py:update_program_info()] - Invalid crowsnest ? 2023-03-11 10:25:33,506 [system.py:update_program_info()] - Invalid klipper ? 2023-03-11 10:25:33,511 [system.py:_needs_update()] - mainsail v2.4.1 -> ? 2023-03-11 10:25:33,515 [system.py:update_program_info()] - Invalid mainsail-config ? 2023-03-11 10:25:33,527 [system.py:update_program_info()] - Invalid moonraker ? 2023-03-11 10:25:33,540 [system.py:update_program_info()] - Invalid sonar ? 2023-03-11 10:25:33,549 [system.py:update_program_info()] - Invalid timelapse ? 2023-03-11 10:25:33,571 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-03-11 10:25:33,599 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-03-11 10:25:33,600 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:25:33,607 [system.py:update_program_info()] - Invalid crowsnest ? 2023-03-11 10:25:33,611 [system.py:update_program_info()] - Invalid klipper ? 2023-03-11 10:25:33,614 [system.py:_needs_update()] - mainsail v2.4.1 -> ? 2023-03-11 10:25:33,617 [system.py:update_program_info()] - Invalid mainsail-config ? 2023-03-11 10:25:33,620 [system.py:update_program_info()] - Invalid moonraker ? 2023-03-11 10:25:33,623 [system.py:update_program_info()] - Invalid sonar ? 2023-03-11 10:25:33,628 [system.py:update_program_info()] - Invalid timelapse ? 2023-03-11 10:25:35,047 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:25:35,065 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:35,075 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:35,081 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:35,775 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:25:35,789 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:37,207 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:37,207 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:37,225 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:37,235 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:37,245 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:37,800 [screen.py:_load_panel()] - Loading panel: network 2023-03-11 10:25:37,801 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/network.py 2023-03-11 10:25:37,834 [network.py:__init__()] - Found wireless interfaces: ['wlan0'] 2023-03-11 10:25:37,835 [network.py:__init__()] - Using NetworkManager 2023-03-11 10:25:38,430 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-03-11 10:25:42,816 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:25:42,838 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:42,849 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:42,855 [menu.py:evaluate_enable()] - moonraker connected True --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-03-11 10:25:27,212 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-03-11 10:25:27,485 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-03-11 10:25:27,488 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-03-11 10:25:27,521 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-11 10:25:27,523 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-03-11 10:25:27,525 [config.py:__init__()] - Configuration validated succesfuly 2023-03-11 10:25:27,527 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-11 10:25:27,649 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-03-11 10:25:27,650 [config.py:install_language()] - Using system lang 2023-03-11 10:25:27,651 [config.py:install_language()] - Using lang en 2023-03-11 10:25:27,667 [screen.py:__init__()] - Screen resolution: 1024x600 2023-03-11 10:25:27,670 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-03-11 10:25:28,656 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-11 10:25:28,670 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-11 10:25:28,690 [screen.py:initial_connection()] - Default printer: None 2023-03-11 10:25:28,691 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-11 10:25:28,692 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-11 10:25:28,692 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-03-11 10:25:28,783 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:28,836 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:28,859 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-11 10:25:28,860 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-11 10:25:28,879 [_logging.py:info()] - Websocket connected 2023-03-11 10:25:28,880 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-11 10:25:28,919 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:28,959 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:28,987 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-11 10:25:29,255 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-11 10:25:29,257 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-03-11 10:25:29,258 [printer.py:reinit()] - # Extruders: 0 2023-03-11 10:25:29,258 [printer.py:reinit()] - # Temperature devices: 0 2023-03-11 10:25:29,258 [printer.py:reinit()] - # Fans: 0 2023-03-11 10:25:29,258 [printer.py:reinit()] - # Output pins: 0 2023-03-11 10:25:29,259 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-11 10:25:29,514 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-03-11 10:25:29,515 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-11 10:25:29,515 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:25:29,537 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:29,538 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:29,562 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:29,564 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:29,565 [files.py:initialize()] - Gcodes path: None 2023-03-11 10:25:29,566 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-11 10:25:29,567 [screen.py:init_printer()] - Printer initialized 2023-03-11 10:25:29,611 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:31,266 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:31,267 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:31,274 [screen.py:_load_panel()] - Loading panel: menu 2023-03-11 10:25:31,275 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-03-11 10:25:31,441 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:31,453 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:31,459 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:31,501 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:31,502 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:31,531 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:31,532 [screen.py:init_tempstore()] - Temperature store size: 1200 --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-03-11 10:25:30,740 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-03-11 10:25:31,136 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-03-11 10:25:31,137 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-03-11 10:25:31,175 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-11 10:25:31,177 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-03-11 10:25:31,180 [config.py:__init__()] - Configuration validated succesfuly 2023-03-11 10:25:31,182 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-11 10:25:31,324 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-03-11 10:25:31,326 [config.py:install_language()] - Using system lang 2023-03-11 10:25:31,328 [config.py:install_language()] - Using lang en 2023-03-11 10:25:31,347 [screen.py:__init__()] - Screen resolution: 1024x600 2023-03-11 10:25:31,351 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-03-11 10:25:33,352 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-11 10:25:33,375 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-11 10:25:33,399 [screen.py:initial_connection()] - Default printer: None 2023-03-11 10:25:33,399 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-11 10:25:33,400 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-11 10:25:33,401 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-03-11 10:25:33,522 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:33,612 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:33,643 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-11 10:25:33,645 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-11 10:25:33,668 [_logging.py:info()] - Websocket connected 2023-03-11 10:25:33,669 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-11 10:25:33,720 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:33,795 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:33,796 [screen.py:init_printer()] - Klipper not connected 2023-03-11 10:25:36,703 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:36,728 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:36,729 [screen.py:init_printer()] - Klipper not connected 2023-03-11 10:25:39,698 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:39,721 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:39,745 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-11 10:25:39,787 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-11 10:25:39,788 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-03-11 10:25:39,789 [printer.py:reinit()] - # Extruders: 0 2023-03-11 10:25:39,789 [printer.py:reinit()] - # Temperature devices: 0 2023-03-11 10:25:39,789 [printer.py:reinit()] - # Fans: 0 2023-03-11 10:25:39,790 [printer.py:reinit()] - # Output pins: 0 2023-03-11 10:25:39,790 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-11 10:25:40,046 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-03-11 10:25:40,047 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-11 10:25:40,047 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:25:40,069 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:40,070 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:40,096 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:40,097 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:40,099 [files.py:initialize()] - Gcodes path: None 2023-03-11 10:25:40,099 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-11 10:25:40,100 [screen.py:init_printer()] - Printer initialized 2023-03-11 10:25:40,114 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:41,410 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:41,411 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:41,422 [screen.py:_load_panel()] - Loading panel: menu 2023-03-11 10:25:41,423 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-03-11 10:25:41,566 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:41,579 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:41,585 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:25:42,707 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:42,711 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:42,741 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:42,743 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:43,347 [screen.py:_load_panel()] - Loading panel: network 2023-03-11 10:25:43,348 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/network.py 2023-03-11 10:25:43,388 [network.py:__init__()] - Found wireless interfaces: ['wlan0'] 2023-03-11 10:25:43,389 [network.py:__init__()] - Using NetworkManager 2023-03-11 10:25:44,101 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-03-11 10:25:54,978 [keyboard.py:__init__()] - Keyboard en 2023-03-11 10:26:12,066 [screen.py:_menu_go_back()] - #### Menu go home 2023-03-11 10:26:12,093 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:12,103 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:12,109 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:12,125 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:26:18,002 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:18,003 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:18,037 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:18,051 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:18,059 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:21,920 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-03-11 10:26:25,942 [keyboard.py:__init__()] - Keyboard en 2023-03-11 10:26:28,666 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:28,686 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:28,696 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:28,702 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:29,639 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-03-11 10:26:41,138 [keyboard.py:__init__()] - Keyboard en 2023-03-11 10:27:06,088 [KlippyGtk.py:Dialog()] - Showing dialog 2023-03-11 10:27:06,092 [wifi_nm.py:connect()] - Connecting to: SuperMesh 2023-03-11 10:27:13,938 [network.py:connected_callback()] - Now connected to a new network 2023-03-11 10:27:25,295 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-03-11 10:27:27,633 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:27:27,653 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:27:27,662 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:27:27,669 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:27:29,298 [screen.py:_load_panel()] - Loading panel: system 2023-03-11 10:27:29,299 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-03-11 10:27:29,373 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-03-11 10:27:29,384 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:27:29,396 [system.py:update_program_info()] - Invalid crowsnest ? 2023-03-11 10:27:29,407 [system.py:update_program_info()] - Invalid klipper ? 2023-03-11 10:27:29,411 [system.py:_needs_update()] - mainsail v2.4.1 -> ? 2023-03-11 10:27:29,415 [system.py:update_program_info()] - Invalid mainsail-config ? 2023-03-11 10:27:29,426 [system.py:update_program_info()] - Invalid moonraker ? 2023-03-11 10:27:29,438 [system.py:update_program_info()] - Invalid sonar ? 2023-03-11 10:27:29,445 [system.py:update_program_info()] - Invalid timelapse ? 2023-03-11 10:27:29,459 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-03-11 10:27:29,485 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-03-11 10:27:29,487 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:27:29,491 [system.py:update_program_info()] - Invalid crowsnest ? 2023-03-11 10:27:29,495 [system.py:update_program_info()] - Invalid klipper ? 2023-03-11 10:27:29,498 [system.py:_needs_update()] - mainsail v2.4.1 -> ? 2023-03-11 10:27:29,500 [system.py:update_program_info()] - Invalid mainsail-config ? 2023-03-11 10:27:29,503 [system.py:update_program_info()] - Invalid moonraker ? 2023-03-11 10:27:29,506 [system.py:update_program_info()] - Invalid sonar ? 2023-03-11 10:27:29,511 [system.py:update_program_info()] - Invalid timelapse ? 2023-05-10 13:22:44,696 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-10 13:22:49,500 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-10 13:22:55,603 [KlippyRest.py:send_request()] - host=127.0.0.1, port=7125>>Read timed out. read timeout=3 2023-05-10 13:22:55,603 [system.py:get_updates()] - No update manager configured 2023-05-10 13:23:10,868 [screen.py:_menu_go_back()] - #### Menu go home 2023-05-10 13:23:10,888 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-10 13:23:10,898 [menu.py:arrangeMenuItems()] - X > power 2023-05-10 13:23:10,904 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-10 13:23:10,925 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-10 13:23:27,396 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-10 13:23:27,397 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-10 13:23:27,424 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-10 13:23:27,434 [menu.py:arrangeMenuItems()] - X > power 2023-05-10 13:23:27,440 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-10 13:23:29,445 [screen.py:_load_panel()] - Loading panel: settings 2023-05-10 13:23:29,446 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/settings.py 2023-05-10 13:23:29,594 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > settings 2023-05-10 13:24:02,308 [screen_panel.py:unload_menu()] - self.menu: ['settings_menu', 'printers_menu'] 2023-05-10 13:24:06,110 [screen.py:_menu_go_back()] - #### Menu go back 2023-05-10 13:24:06,134 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-10 13:24:06,149 [menu.py:arrangeMenuItems()] - X > power 2023-05-10 13:24:06,157 [menu.py:evaluate_enable()] - moonraker connected True --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-03-11 10:25:27,601 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-03-11 10:25:27,900 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-03-11 10:25:27,903 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-03-11 10:25:27,941 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-11 10:25:27,943 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-03-11 10:25:27,947 [config.py:__init__()] - Configuration validated succesfuly 2023-03-11 10:25:27,949 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-11 10:25:28,113 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-03-11 10:25:28,114 [config.py:install_language()] - Using system lang 2023-03-11 10:25:28,116 [config.py:install_language()] - Using lang en 2023-03-11 10:25:28,134 [screen.py:__init__()] - Screen resolution: 1024x600 2023-03-11 10:25:28,137 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-03-11 10:25:29,139 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-11 10:25:29,156 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-11 10:25:29,181 [screen.py:initial_connection()] - Default printer: None 2023-03-11 10:25:29,182 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-11 10:25:29,183 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-11 10:25:29,183 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-03-11 10:25:29,310 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:29,397 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:29,435 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-11 10:25:29,436 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-11 10:25:29,474 [_logging.py:info()] - Websocket connected 2023-03-11 10:25:29,475 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-11 10:25:29,524 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:29,564 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:29,601 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-11 10:25:29,802 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-11 10:25:29,804 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-03-11 10:25:29,804 [printer.py:reinit()] - # Extruders: 0 2023-03-11 10:25:29,805 [printer.py:reinit()] - # Temperature devices: 0 2023-03-11 10:25:29,805 [printer.py:reinit()] - # Fans: 0 2023-03-11 10:25:29,805 [printer.py:reinit()] - # Output pins: 0 2023-03-11 10:25:29,806 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-11 10:25:30,061 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-03-11 10:25:30,063 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-03-11 10:25:30,063 [printer.py:change_state()] - Adding callback for state: error 2023-03-11 10:25:30,089 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:30,090 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:30,122 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:30,123 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:30,125 [files.py:initialize()] - Gcodes path: None 2023-03-11 10:25:30,125 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-11 10:25:30,127 [screen.py:init_printer()] - Printer initialized 2023-03-11 10:25:30,173 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:32,542 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:32,543 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:32,585 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:32,587 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:26:01,282 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:26:01,283 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:26:01,288 [screen.py:_load_panel()] - Loading panel: menu 2023-03-11 10:26:01,289 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-03-11 10:26:01,449 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:01,465 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:01,474 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:03,394 [screen.py:_load_panel()] - Loading panel: network 2023-03-11 10:26:03,395 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/network.py 2023-03-11 10:26:03,428 [network.py:__init__()] - Found wireless interfaces: ['wlan0'] 2023-03-11 10:26:03,428 [network.py:__init__()] - Using NetworkManager 2023-03-11 10:26:04,014 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-03-11 10:26:06,517 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:06,541 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:06,551 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:06,558 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:08,459 [screen.py:_load_panel()] - Loading panel: settings 2023-03-11 10:26:08,460 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/settings.py 2023-03-11 10:26:08,630 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > settings 2023-03-11 10:26:17,193 [screen.py:_menu_go_back()] - #### Menu go back 2023-03-11 10:26:17,221 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:26:17,234 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:26:17,243 [menu.py:evaluate_enable()] - moonraker connected True 2023-03-11 10:26:18,706 [screen.py:_load_panel()] - Loading panel: system 2023-03-11 10:26:18,707 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-03-11 10:26:18,787 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-03-11 10:26:18,800 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:26:18,811 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-03-11 10:26:18,823 [system.py:_needs_update()] - klipper v0.11.0-127 -> v0.11.0-198 2023-03-11 10:26:18,828 [system.py:_needs_update()] - mainsail v2.4.1 -> ? 2023-03-11 10:26:18,832 [system.py:_needs_update()] - mainsail-config v1.0.0-8 -> v1.0.0-11 2023-03-11 10:26:18,844 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-03-11 10:26:18,858 [system.py:_already_updated()] - sonar v0.1.2-0 2023-03-11 10:26:18,869 [system.py:_needs_update()] - timelapse v0.0.1-129 -> v0.0.1-132 2023-03-11 10:26:18,885 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-03-11 10:26:18,923 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-03-11 10:26:18,927 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-03-11 10:26:18,936 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-03-11 10:26:18,940 [system.py:_needs_update()] - klipper v0.11.0-127 -> v0.11.0-198 2023-03-11 10:26:18,944 [system.py:_needs_update()] - mainsail v2.4.1 -> ? 2023-03-11 10:26:18,949 [system.py:_needs_update()] - mainsail-config v1.0.0-8 -> v1.0.0-11 2023-03-11 10:26:18,954 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-03-11 10:26:18,959 [system.py:_already_updated()] - sonar v0.1.2-0 2023-03-11 10:26:18,967 [system.py:_needs_update()] - timelapse v0.0.1-129 -> v0.0.1-132 2023-03-11 10:26:25,215 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:55:56,380 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-13 21:55:56,381 [system.py:update_confirm()] - Updating full 2023-05-13 21:55:56,430 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:55:56,433 [system.py:update_program()] - Sending machine.update.full 2023-05-13 21:56:04,059 [screen.py:_websocket_callback()] - notify_update_response:Error updating KlipperScreen: Update aborted, repo not valid --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 21:56:11,744 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 21:56:11,931 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 21:56:11,933 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 21:56:11,965 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 21:56:11,967 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 21:56:11,970 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 21:56:11,972 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 21:56:12,095 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 21:56:12,097 [config.py:install_language()] - Using system lang 2023-05-13 21:56:12,100 [config.py:install_language()] - Using lang en 2023-05-13 21:56:12,118 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 21:56:12,122 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 21:56:12,786 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 21:56:12,803 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 21:56:12,827 [screen.py:initial_connection()] - Default printer: None 2023-05-13 21:56:12,827 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 21:56:12,828 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 21:56:12,829 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 21:56:12,932 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:56:12,988 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:56:13,013 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 21:56:13,014 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 21:56:13,033 [_logging.py:info()] - Websocket connected 2023-05-13 21:56:13,034 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 21:56:13,130 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:56:13,159 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:56:13,189 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 21:56:13,448 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 21:56:13,450 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-05-13 21:56:13,450 [printer.py:reinit()] - # Extruders: 0 2023-05-13 21:56:13,451 [printer.py:reinit()] - # Temperature devices: 0 2023-05-13 21:56:13,451 [printer.py:reinit()] - # Fans: 0 2023-05-13 21:56:13,451 [printer.py:reinit()] - # Output pins: 0 2023-05-13 21:56:13,452 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 21:56:13,710 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-05-13 21:56:13,711 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 21:56:13,712 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 21:56:13,743 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:56:13,744 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:56:13,777 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:56:13,779 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:56:13,781 [files.py:initialize()] - Gcodes path: None 2023-05-13 21:56:13,782 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 21:56:13,783 [screen.py:init_printer()] - Printer initialized 2023-05-13 21:56:13,804 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:56:16,154 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:56:16,155 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:56:16,182 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:56:16,184 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:56:31,195 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-13 21:56:31,196 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-13 21:56:31,205 [screen.py:_load_panel()] - Loading panel: menu 2023-05-13 21:56:31,206 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-13 21:56:31,322 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:56:31,331 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:56:31,336 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 21:56:32,011 [screen.py:_load_panel()] - Loading panel: system 2023-05-13 21:56:32,011 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-13 21:56:32,085 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-13 21:56:32,097 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:56:32,109 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:56:32,121 [system.py:_needs_update()] - klipper v0.11.0-127 -> v0.11.0-198 2023-05-13 21:56:32,124 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:56:32,128 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:56:32,139 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-05-13 21:56:32,150 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:56:32,157 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:56:32,171 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-13 21:56:32,195 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-13 21:56:32,198 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:56:32,203 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:56:32,207 [system.py:_needs_update()] - klipper v0.11.0-127 -> v0.11.0-198 2023-05-13 21:56:32,209 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:56:32,212 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:56:32,215 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-05-13 21:56:32,218 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:56:32,222 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:56:42,910 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:56:44,321 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-13 21:56:44,321 [system.py:update_confirm()] - Updating full 2023-05-13 21:56:44,363 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:56:44,365 [system.py:update_program()] - Sending machine.update.full 2023-05-13 21:56:44,400 [screen.py:_websocket_callback()] - notify_update_response:Error updating KlipperScreen: Update aborted, repo not valid --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 21:56:51,746 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 21:56:51,932 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 21:56:51,935 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 21:56:51,966 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 21:56:51,968 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 21:56:51,971 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 21:56:51,973 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 21:56:52,090 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 21:56:52,091 [config.py:install_language()] - Using system lang 2023-05-13 21:56:52,093 [config.py:install_language()] - Using lang en 2023-05-13 21:56:52,108 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 21:56:52,111 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 21:56:52,688 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 21:56:52,702 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 21:56:52,722 [screen.py:initial_connection()] - Default printer: None 2023-05-13 21:56:52,722 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 21:56:52,723 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 21:56:52,724 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 21:56:52,813 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:56:52,860 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:56:52,882 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 21:56:52,883 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 21:56:52,900 [_logging.py:info()] - Websocket connected 2023-05-13 21:56:52,901 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 21:56:52,943 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:56:52,969 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:56:52,993 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 21:56:53,078 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 21:56:53,080 [printer.py:reinit()] - Klipper version: v0.11.0-127-g4b1536d6 2023-05-13 21:56:53,081 [printer.py:reinit()] - # Extruders: 0 2023-05-13 21:56:53,081 [printer.py:reinit()] - # Temperature devices: 0 2023-05-13 21:56:53,081 [printer.py:reinit()] - # Fans: 0 2023-05-13 21:56:53,081 [printer.py:reinit()] - # Output pins: 0 2023-05-13 21:56:53,082 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 21:56:53,339 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-05-13 21:56:53,340 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 21:56:53,341 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 21:56:53,363 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:56:53,364 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:56:53,391 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:56:53,392 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:56:53,393 [files.py:initialize()] - Gcodes path: None 2023-05-13 21:56:53,394 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 21:56:53,395 [screen.py:init_printer()] - Printer initialized 2023-05-13 21:56:53,439 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:56:56,154 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:56:56,154 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:56:56,180 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:56:56,181 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:57:18,336 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-13 21:57:18,336 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-13 21:57:18,344 [screen.py:_load_panel()] - Loading panel: menu 2023-05-13 21:57:18,345 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-13 21:57:18,455 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:57:18,464 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:57:18,469 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 21:57:19,417 [screen.py:_load_panel()] - Loading panel: system 2023-05-13 21:57:19,418 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-13 21:57:19,493 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-13 21:57:19,505 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:57:19,516 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:57:19,528 [system.py:_needs_update()] - klipper v0.11.0-127 -> v0.11.0-198 2023-05-13 21:57:19,532 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:57:19,536 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:57:19,547 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-05-13 21:57:19,558 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:57:19,565 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:57:19,578 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-13 21:57:19,603 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-13 21:57:19,606 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:57:19,611 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:57:19,614 [system.py:_needs_update()] - klipper v0.11.0-127 -> v0.11.0-198 2023-05-13 21:57:19,617 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:57:19,620 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:57:19,623 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-05-13 21:57:19,625 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:57:19,630 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:57:31,582 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:57:43,427 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-13 21:57:43,428 [system.py:update_confirm()] - Updating klipper 2023-05-13 21:57:43,429 [system.py:update_program()] - program: {'channel': 'dev', 'debug_enabled': False, 'need_channel_update': False, 'is_valid': True, 'configured_type': 'git_repo', 'info_tags': [], 'detected_type': 'git_repo', 'remote_alias': 'origin', 'branch': 'master', 'owner': 'Klipper3d', 'repo_name': 'klipper', 'version': 'v0.11.0-127', 'remote_version': 'v0.11.0-198', 'current_hash': '4b1536d62f2b5c5e0beb4692dbe4d0d1fa2bcb1b', 'remote_hash': '33b18fd62ba73c90054a7b94b68c341bb3f40d9a', 'is_dirty': False, 'detached': False, 'commits_behind': [{'sha': '33b18fd62ba73c90054a7b94b68c341bb3f40d9a', 'author': 'Frederic Morin', 'date': '1683472505', 'subject': 'stm32f7: add support for stm32f7 and remram board', 'message': 'Signed-off-by: Frederic Morin ', 'tag': None}, {'sha': 'a3eebab4f2b90822f76de91487ff3d4158b80494', 'author': 'Eric Callahan', 'date': '1683223634', 'subject': 'util: report git version info as a dict', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': 'b89a049fdb2455678df08cca9b66b78a71143394', 'author': 'Eric Callahan', 'date': '1683223634', 'subject': 'klippy: report repo branch, remote, and tracking url', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': '3bd0be40d502f43bb9f941a60bf778b902ed4e6e', 'author': "Kevin O'Connor", 'date': '1683125141', 'subject': 'lib: Update to latest can2040 code', 'message': "Disable tx state machine before resetting it\nCheck for rx message with same id as tx but different payload\nDo not use canrx line to alter bit timing of cantx line\nImprove bit time synchronization with slow transmitters\nImplement tx synchronization to faster transmitters\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '1a24e7c5b683355335b115e5659eb6fe8c8d11dc', 'author': "Kevin O'Connor", 'date': '1683042018', 'subject': 'klippy: Report repo version as "dirty" if there are untracked python files', 'message': "Check for untracked files in the klippy/extras/ and klippy/kinematics/\ndirectories and report those files in the log. This helps identify\ncode modifications when inspecting a log.\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '3b0729c94932f4df0298a7c992022f54a5454428', 'author': 'Wulfsta', 'date': '1682963792', 'subject': 'atsamd: Add support for SAMC21', 'message': 'Signed-off-by: Luke Vuksta ', 'tag': None}, {'sha': '06e5c577bd1874d48e1aefd13d8639525e571670', 'author': 'Wulfsta', 'date': '1682963792', 'subject': 'lib: Add Atmel SAM C21 headers', 'message': 'Signed-off-by: Luke Vuksta ', 'tag': None}, {'sha': '6414e1772de73d583b0ac5549d0edb816429478a', 'author': 'Thomas Lété', 'date': '1682962232', 'subject': 'config : Longer LK4 X (#6185)', 'message': 'New printer : Longer LK4X configuration\r\n\r\nThis configuration is based on the one provided by Longer with some tweaks.\r\n\r\nSigned-off-by: Thomas Lété ', 'tag': None}, {'sha': '19877425453269a09fed414b83686fa7162c5c67', 'author': "Kevin O'Connor", 'date': '1682783393', 'subject': 'lib: Update to latest can2040 code', 'message': "Fix tx hang after error frame during tx\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': 'bec1d957d216986da8da216aca557c4d31623fd2', 'author': "Kevin O'Connor", 'date': '1682395504', 'subject': 'rp2040: Handle USB resets', 'message': 'On a USB bus reset the controller address needs to be reset to zero.\nOtherwise, the device becomes unresponsive after a USB reset and will\nremain unresponsive until a power cycle. This often shows up in the\nLinux system logs as "device descriptor read/64, error -32" messages.\n\nMake sure USB_INTE_BUS_RESET_BITS is enabled and clear the USB address\non a bus reset.\n\nSigned-off-by: Kevin O\'Connor ', 'tag': None}, {'sha': 'b17ae55f5bd3a079ab3626b1e6fd5c60416e6ba0', 'author': "Kevin O'Connor", 'date': '1682350266', 'subject': 'usb_canbus: Rework USB message transmit prioritization', 'message': "There is no need to heavily prioritize the sending of canbus packets\nover USB. A single check to flush the incoming canbus packets is\nsufficient.\n\nAlso, be sure to wake up canserial_notify_tx() even if canhw_send()\nblocks.\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '28f11244c3a91c18f0f4f3c3a02b5f20b0ff5547', 'author': "Kevin O'Connor", 'date': '1682350266', 'subject': 'usb_canbus: No need to check if canserial can accept a packet', 'message': "The canserial code already advertizes a receive window, so the host\nshould never flood the canserial code. Remove the extra scheduling\nchecks to simplify the usb_canbus code.\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '3377f29bc54938ab2820ff6b5212ce525e12b511', 'author': "Kevin O'Connor", 'date': '1682350266', 'subject': 'usb_canbus: Minor code reformatting of drain_hw_queue()', 'message': "Signed-off-by: Kevin O'Connor ", 'tag': None}, {'sha': 'f10c60eea767e04f3eda524e66b410127a5af34a', 'author': "Kevin O'Connor", 'date': '1682350266', 'subject': 'usb_canbus: Increase rx canbus packet buffer to 32', 'message': "A buffer of only 8 canbus packets is only 64 bytes of data, which\ncould be exceeded if the usb-to-canbus mcu gets busy doing other work.\nIncrease the buffer to 32 packets.\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '8b2074e068b661fcc91ba7d70fe239a4b08fa0e5', 'author': "Kevin O'Connor", 'date': '1682350183', 'subject': 'stm32: Fix usbotg irq wakeup notification', 'message': "The DAINTMSK prevents irqs but does not prevent the status reporting\nin the GINTSTS and DAINT fields. Thus, the mask bits should be\nchecked prior to sending a wakeup notification.\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '10e816979e628784ee0b9fe2bc76b2d3f7cc9d50', 'author': 'Scott Mudge', 'date': '1682349000', 'subject': 'aht10: update comments and docs for AHT20/AHT21 support', 'message': "The control bytes for the AHT20 and AHT21 are identical to the AHT10, but I had not been able to test just yet to ensure the sensor code supported the other sensors. I've wrapped up testing and updated the comments/docs to reflect this additional support.\n\nSigned-off-by: Scott Mudge ", 'tag': None}, {'sha': '5a49372dec24fc9874c17fa63b6676d3adb9b4f6', 'author': 'crazyroses', 'date': '1682348830', 'subject': 'docs: Update Measuring_Resonances.md (#6177)', 'message': 'Correction for table "Recommended connection scheme for I2C (i2c0a) on the RP2040", line 160, to match the correct writing in the Fritzing image shown above, RP2040 pin 36 in place of 39;\r\nCorrection of typo in line 346, "pins" in place of "pin"\r\n\r\nSigned-off-by: Adrian Rose ', 'tag': None}, {'sha': '9b59d745f1d025e883533825b55435d2240b7944', 'author': 'jdonagher', 'date': '1682348450', 'subject': 'docs: Update Bed_Mesh.md (#6143)', 'message': 'Fix typo.\r\n\r\nSigned-off-by: John Donagher ', 'tag': None}, {'sha': '011b4e39e63980266342cdd6dacfdb15da8c684d', 'author': 'Dr. Matthew Swabey', 'date': '1681956003', 'subject': 'docs: Fix nested list in Measuring_Resonances (#6157)', 'message': 'Signed-off-by: Matthew Swabey ', 'tag': None}, {'sha': '80a7744b42aabd38eab52f845fc94a724d6676c0', 'author': 'Dr. Matthew Swabey', 'date': '1681922062', 'subject': 'sensor_mpu9250: Fix or improve reliability (#6170)', 'message': 'Fixes common MPU-9250 accelerometer issues for RPi Linux MCU and\r\nimproves reliability on all other architectures by adjusting the MPU-*\r\nreading algorithm to only read whole Klipper messages\' worth of\r\ndata from MPU-* and eliminating many unnecessary checks of the MPU FIFO\r\nfill-level that consumed bus bandwidth needed for data transfer. Fixes\r\nintermittent "Lost communication with MCU \'rpi\'" due to "Timer too\r\nclose" and transposed / corrupted data due to FIFO overrun/data loss\r\nwhen using MPU-* accelerometers. In addition FIFO overrun checks are\r\nperformed by testing the MPU interrupt flag vs. inferring from the FIFO\r\nfill level.\r\n\r\nStress tested for 13hrs with two MPU-6500 attached to one I2C bus on RPi\r\n and one on a PR2040\r\nStress tested for 23hrs with two MPU-6500 attached to one I2C bus on RPi\r\n and one on a ATmega328P (Seeduino Nano)\r\n\r\nSigned-off-by: Matthew Swabey ', 'tag': None}, {'sha': 'c2fe37292584455e71ca6e531b9d7286d4cb56a6', 'author': 'Justin Schuh', 'date': '1681921340', 'subject': 'gcode_macro: Catch variable encoding errors', 'message': 'Catch parsing and json encoding errors at variable assignment.\n\nSigned-off-by: Justin Schuh ', 'tag': None}, {'sha': 'd68a6c28ba93df4f9bca6cb5a4bde4da09adfa0e', 'author': 'Justin Schuh', 'date': '1681921340', 'subject': 'webhooks: Log json encoding errors', 'message': 'Signed-off-by: Justin Schuh ', 'tag': None}, {'sha': '40b4b34998c0708b2050c394feb383f901b76a0b', 'author': 'Florin Popescu', 'date': '1681919238', 'subject': 'stm32: Support for USART5 on STM32G0B1 (#6105)', 'message': 'Support for USART5 on PD2,3\r\n\r\nAdd exception on RCC bits for USART5&6\r\n\r\nSigned-off-by: Florin Popescu ', 'tag': None}, {'sha': 'cba119db3a386c70caa4dc1f0a52be626792e208', 'author': 'xpeng', 'date': '1681611842', 'subject': 'config: Add printer configuration for Anycubic Kobra Go (#6166)', 'message': 'Signed-off-by: Yipeng Zhou ', 'tag': None}, {'sha': '4748dffd7a0fcf736b270b6d37c5e6fbb8f07805', 'author': 'Scott Mudge', 'date': '1681600674', 'subject': 'docs: Add AHT10 temperature sensor doc section in Config_Reference.md (followup #6138) (#6167)', 'message': 'Followed general outline used by HTU21D and BME280.\r\n\r\nSigned-off-by: Scott Mudge ', 'tag': None}, {'sha': 'a8b1b0ef0572f07f04f0d68969ef042fff290fa7', 'author': 'Nathan', 'date': '1681228100', 'subject': 'docs: Fix duplicate section in Measuring_Resonaces.md (#6160)', 'message': 'Removed a duplicated section in Measuring_Resonances.md.\r\nAlso fixed its header level.\r\n\r\nSigned-off-by: Nathan Chiu ', 'tag': None}, {'sha': 'c2b2278a49a25ec180a9671e3f5a37643a102658', 'author': 'vcore85', 'date': '1681227799', 'subject': 'tmc5160: add DRV_CONF Register for TMC5160 (#6154)', 'message': 'In some condition ，“drvstrength 2” does not work. According to page 17, some mosfets need “drvstrength” set to 0 .\r\n\r\nFrom datasheet rev1.15, the DRVSTRENGTH reset default is 0 . (instead of 2)\r\n\r\nSigned-off-by: Albert Lin ', 'tag': None}, {'sha': 'd16adc356bc03cbb1095f4b91b57afbdec667dd4', 'author': 'flowerysong', 'date': '1681227581', 'subject': 'docs: Add missing code block indicators to Slicers.md(#6161)', 'message': 'Signed-off-by: Paul Arthur ', 'tag': None}, {'sha': 'aa8a6f4cf1a50724a61fd0ee6a80590677856b21', 'author': "Kevin O'Connor", 'date': '1681226457', 'subject': 'lib: Update to latest can2040 code', 'message': "Avoid some gcc warnings by using uint32_t for iterators\nBetter document the fallthough case statement in crc_bytes()\nFix txpending race from report_line_ackdone()\nMake can2040_transmit() multi-cpu atomic\n\nSigned-off-by: Kevin O'Connor ", 'tag': None}, {'sha': '83308a10510ca4efa022c463b5e6455192f8a0a7', 'author': "Kevin O'Connor", 'date': '1680895240', 'subject': 'tmc: Support reporting tmc2240 temperature in driver get_status()', 'message': "Signed-off-by: Kevin O'Connor ", 'tag': None}], 'git_messages': [], 'full_version_string': 'v0.11.0-127-g4b1536d6', 'pristine': True, 'corrupt': False} 2023-05-13 21:57:43,472 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:57:43,475 [system.py:update_program()] - Sending machine.update.klipper 2023-05-13 21:57:48,259 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-05-13 21:57:48,259 [printer.py:change_state()] - Adding callback for state: disconnected 2023-05-13 21:57:48,737 [screen.py:state_disconnected()] - ### Going to disconnected 2023-05-13 21:57:48,752 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:57:48,785 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:57:48,810 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:57:48,811 [screen.py:init_printer()] - Klipper not connected 2023-05-13 21:57:48,822 [base_panel.py:process_update()] - Update complete 2023-05-13 21:57:52,157 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:57:52,184 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:57:52,185 [screen.py:init_printer()] - Klipper not connected 2023-05-13 21:57:53,550 [base_panel.py:finish_updating()] - Finishing update 2023-05-13 21:57:53,563 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-13 21:57:53,564 [screen.py:_menu_go_back()] - #### Menu go home 2023-05-13 21:57:55,157 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:57:55,183 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:57:55,184 [screen.py:init_printer()] - Klipper not connected 2023-05-13 21:57:57,727 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-13 21:57:57,727 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-13 21:57:57,855 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:57:57,865 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:57:57,870 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 21:57:58,159 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:57:58,186 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:57:58,187 [screen.py:init_printer()] - Klipper not connected 2023-05-13 21:57:58,709 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-13 21:57:58,722 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:57:58,735 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:57:58,749 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-13 21:57:58,754 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:57:58,759 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:57:58,772 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-05-13 21:57:58,785 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:57:58,793 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:57:58,810 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-13 21:57:58,841 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-13 21:57:58,843 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:57:58,849 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:57:58,854 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-13 21:57:58,857 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:57:58,861 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:57:58,864 [system.py:_needs_update()] - moonraker v0.8.0-29 -> v0.8.0-40 2023-05-13 21:57:58,867 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:57:58,873 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:58:01,157 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:58:01,182 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:58:01,183 [screen.py:init_printer()] - Klipper not connected 2023-05-13 21:58:01,551 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 21:58:03,260 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-13 21:58:03,261 [system.py:update_confirm()] - Updating moonraker 2023-05-13 21:58:03,262 [system.py:update_program()] - program: {'channel': 'dev', 'debug_enabled': False, 'need_channel_update': False, 'is_valid': True, 'configured_type': 'git_repo', 'info_tags': [], 'detected_type': 'git_repo', 'remote_alias': 'origin', 'branch': 'master', 'owner': 'Arksine', 'repo_name': 'moonraker', 'version': 'v0.8.0-29', 'remote_version': 'v0.8.0-40', 'current_hash': '80920dd8723b7dac6d176500fed88d81149f22b2', 'remote_hash': 'b21f177e951f70a0967b4967b1d43d2bfde02e1b', 'is_dirty': False, 'detached': False, 'commits_behind': [{'sha': 'b21f177e951f70a0967b4967b1d43d2bfde02e1b', 'author': 'Chris Thornton', 'date': '1683453583', 'subject': 'notifier: Add `body_format` as an option', 'message': 'This lets you format the messages through apprise a little nicer\n\nSigned-off-by: Chris Thornton ', 'tag': None}, {'sha': '6c7dfe592131eb95fd760ef2db83387966b250f0', 'author': 'Eric Callahan', 'date': '1682249408', 'subject': 'docs: add new fields to webcam documentation', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': 'cf56a1cdcd7f50c020f796437e3f5e6d402a4839', 'author': 'Eric Callahan', 'date': '1682249407', 'subject': 'webcam: add new fields', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': 'ac10b4a3b939f2b177425ca480b630a38f88b6eb', 'author': 'Eric Callahan', 'date': '1681819795', 'subject': "http_client: don't store client in the wrapper", 'message': 'This closes a securitiy vulernability where the client could\nbe used to download and save a file from any configured\nlocation.\n\nSigned-off-by: Eric Callahan ', 'tag': None}, {'sha': '53d9522c066548ca5724e56695b7229ea54fe502', 'author': 'Eric Callahan', 'date': '1681819794', 'subject': 'sensors: measurement request fix', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': 'eff090170ca43699ba59a89d6cf8085b7c873b87', 'author': 'Eric Callahan', 'date': '1681472609', 'subject': 'docs: update power configuration documentation', 'message': 'Signed-off-by: Eric Callaham ', 'tag': None}, {'sha': '204e7ca4ffad6c1b749dd1099d3acfcbae9d53e5', 'author': 'Eric Callahan', 'date': '1681472608', 'subject': 'power: add support for generic http sensors', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': 'd393c89ae068ee61b26b43573a1f0782bdd8c275', 'author': 'Eric Callahan', 'date': '1680689588', 'subject': 'http_client: add a http request wrapper', 'message': 'This wrapper is an object that may be used to build requests\nprocedurally rather than submit all request parameters in\na call to "request()", "get()", etc. This is primarily useful for\nusage in a Jinja2 context.\n\nSigned-off-by: Eric Callahan ', 'tag': None}, {'sha': '31e589abdeac2c45a48bb3aba1cb103f45eed5a0', 'author': 'Eric Callahan', 'date': '1680620836', 'subject': 'job_queue: fix erronous state after start', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': '6b73da55f874ebee069c3847f42c19f0c87542c5', 'author': 'Eric Callahan', 'date': '1680620592', 'subject': 'job_queue: never transition after complete unless auto is enabled', 'message': 'Signed-off-by: Eric Callahan ', 'tag': None}, {'sha': '110cbd108409aecb4e5654b0f811cad047cd909b', 'author': 'SoftFever', 'date': '1679307633', 'subject': 'metadata: Add support to extract metadata from g-code files generated by OrcaSlicer', 'message': 'Signed-off-by: Li Jiang ', 'tag': None}], 'git_messages': [], 'full_version_string': 'v0.8.0-29-g80920dd', 'pristine': True, 'corrupt': False} 2023-05-13 21:58:03,264 [system.py:update_program()] - Sending machine.update.moonraker 2023-05-13 21:58:05,843 [base_panel.py:process_update()] - Update complete 2023-05-13 21:58:05,845 [base_panel.py:process_update()] - error trying to show the updater button the dialog might be closed 2023-05-13 21:58:06,005 [KlippyWebsocket.py:on_close()] - Server Shutdown 2023-05-13 21:58:06,007 [KlippyWebsocket.py:on_close()] - Moonraker Websocket Closed 2023-05-13 21:58:06,025 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:58:06,040 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 21:58:06,060 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:58:06,090 [KlippyRest.py:send_request()] - host=127.0.0.1, port=7125>>Max retries exceeded with url>>Failed to establish a new connection>>[Errno 111] Connection refused 2023-05-13 21:58:11,774 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-13 21:58:11,775 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-13 21:58:11,926 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:58:11,936 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:58:11,943 [menu.py:evaluate_enable()] - moonraker connected False 2023-05-13 21:58:11,944 [menu.py:arrangeMenuItems()] - X > system 2023-05-13 21:58:12,943 [screen.py:_load_panel()] - Loading panel: settings 2023-05-13 21:58:12,944 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/settings.py 2023-05-13 21:58:13,104 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > settings 2023-05-13 21:58:16,135 [KlippyWebsocket.py:reconnect()] - Attempting to reconnect 2023-05-13 21:58:16,194 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:58:16,229 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 21:58:16,230 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 21:58:16,260 [_logging.py:info()] - Websocket connected 2023-05-13 21:58:16,260 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 21:58:16,315 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:58:16,343 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:58:16,364 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/printer/info 2023-05-13 21:58:19,153 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:58:19,176 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:58:19,200 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 21:58:19,360 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 21:58:19,361 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 21:58:19,362 [printer.py:reinit()] - # Extruders: 0 2023-05-13 21:58:19,362 [printer.py:reinit()] - # Temperature devices: 0 2023-05-13 21:58:19,362 [printer.py:reinit()] - # Fans: 0 2023-05-13 21:58:19,363 [printer.py:reinit()] - # Output pins: 0 2023-05-13 21:58:19,363 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 21:58:19,621 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-05-13 21:58:19,622 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 21:58:19,622 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 21:58:19,649 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:58:19,650 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:58:19,675 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:58:19,676 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:58:19,678 [files.py:initialize()] - Gcodes path: None 2023-05-13 21:58:19,678 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 21:58:19,679 [screen.py:init_printer()] - Printer initialized 2023-05-13 21:58:19,704 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 21:58:26,491 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 21:58:26,680 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 21:58:26,682 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 21:58:26,714 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 21:58:26,716 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 21:58:26,719 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 21:58:26,721 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 21:58:26,839 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 21:58:26,840 [config.py:install_language()] - Using system lang 2023-05-13 21:58:26,842 [config.py:install_language()] - Using lang en 2023-05-13 21:58:26,856 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 21:58:26,859 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 21:58:27,437 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 21:58:27,451 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 21:58:27,471 [screen.py:initial_connection()] - Default printer: None 2023-05-13 21:58:27,472 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 21:58:27,472 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 21:58:27,473 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 21:58:27,562 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:58:27,608 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:58:27,633 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 21:58:27,635 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 21:58:27,650 [_logging.py:info()] - Websocket connected 2023-05-13 21:58:27,651 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 21:58:27,690 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 21:58:27,715 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 21:58:27,739 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 21:58:27,889 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 21:58:27,890 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 21:58:27,891 [printer.py:reinit()] - # Extruders: 0 2023-05-13 21:58:27,891 [printer.py:reinit()] - # Temperature devices: 0 2023-05-13 21:58:27,891 [printer.py:reinit()] - # Fans: 0 2023-05-13 21:58:27,892 [printer.py:reinit()] - # Output pins: 0 2023-05-13 21:58:27,892 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 21:58:28,147 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object 2023-05-13 21:58:28,149 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 21:58:28,149 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 21:58:28,171 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:58:28,172 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:58:28,196 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:58:28,198 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:58:28,199 [files.py:initialize()] - Gcodes path: None 2023-05-13 21:58:28,200 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 21:58:28,201 [screen.py:init_printer()] - Printer initialized 2023-05-13 21:58:28,244 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 21:58:30,153 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 21:58:30,154 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 21:58:30,179 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 21:58:30,180 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 21:58:43,419 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-13 21:58:43,420 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-13 21:58:43,425 [screen.py:_load_panel()] - Loading panel: menu 2023-05-13 21:58:43,426 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-13 21:58:43,542 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:58:43,551 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:58:43,556 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 21:58:44,105 [screen.py:_load_panel()] - Loading panel: system 2023-05-13 21:58:44,106 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-13 21:58:44,176 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-13 21:58:44,188 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:58:44,199 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:58:44,211 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-13 21:58:44,215 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:58:44,219 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:58:44,231 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-13 21:58:44,242 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:58:44,249 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:58:44,263 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-13 21:58:44,286 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-13 21:58:44,287 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-13 21:58:44,292 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-13 21:58:44,295 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-13 21:58:44,299 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-13 21:58:44,301 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-13 21:58:44,304 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-13 21:58:44,308 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-13 21:58:44,313 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-13 21:58:49,296 [screen.py:_menu_go_back()] - #### Menu go back 2023-05-13 21:58:49,317 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:58:49,326 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:58:49,333 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 21:58:50,194 [screen.py:_load_panel()] - Loading panel: network 2023-05-13 21:58:50,194 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/network.py 2023-05-13 21:58:50,222 [network.py:__init__()] - Found wireless interfaces: ['wlan0'] 2023-05-13 21:58:50,223 [network.py:__init__()] - Using NetworkManager 2023-05-13 21:58:50,791 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > network 2023-05-13 21:59:16,626 [screen.py:_menu_go_back()] - #### Menu go back 2023-05-13 21:59:16,658 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-13 21:59:16,672 [menu.py:arrangeMenuItems()] - X > power 2023-05-13 21:59:16,681 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 21:59:18,513 [screen.py:_menu_go_back()] - #### Menu go back 2023-05-13 21:59:18,528 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:01:36,253 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-05-13 22:01:36,253 [printer.py:change_state()] - Adding callback for state: disconnected 2023-05-13 22:01:36,255 [screen.py:state_disconnected()] - ### Going to disconnected 2023-05-13 22:01:36,266 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:01:36,295 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:01:36,318 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:01:36,318 [screen.py:init_printer()] - Klipper not connected 2023-05-13 22:01:39,153 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:01:39,175 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:01:39,199 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:01:39,229 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:01:39,232 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:01:39,233 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:01:39,233 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:01:39,233 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:01:39,234 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:01:39,235 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:01:39,521 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:01:39,524 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-05-13 22:01:39,525 [printer.py:change_state()] - Adding callback for state: startup 2023-05-13 22:01:39,547 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:01:39,548 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:01:39,575 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:01:39,577 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:01:39,578 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:01:39,578 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:01:39,580 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:01:42,154 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:01:42,154 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:01:42,180 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:01:42,181 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:04:38,131 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 22:04:38,137 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:04:45,515 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:04:45,699 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:04:45,701 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:04:45,733 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:04:45,735 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:04:45,738 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:04:45,740 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:04:45,857 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:04:45,858 [config.py:install_language()] - Using system lang 2023-05-13 22:04:45,860 [config.py:install_language()] - Using lang en 2023-05-13 22:04:45,875 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:04:45,878 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:04:46,448 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:04:46,463 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:04:46,483 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:04:46,484 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:04:46,485 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:04:46,485 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:04:46,575 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:04:46,621 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:04:46,642 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:04:46,644 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:04:46,660 [_logging.py:info()] - Websocket connected 2023-05-13 22:04:46,660 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:04:46,699 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:04:46,724 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:04:46,748 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:04:46,969 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:04:46,973 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:04:46,973 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:04:46,974 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:04:46,974 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:04:46,975 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:04:46,976 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:04:47,260 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:04:47,263 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 22:04:47,263 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 22:04:47,290 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:04:47,291 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:04:47,316 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:04:47,317 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:04:47,319 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:04:47,319 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:04:47,321 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:04:47,364 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:04:49,153 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:04:49,154 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:04:49,179 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:04:49,180 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:08:41,115 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 22:08:41,144 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:08:48,516 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:08:48,703 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:08:48,705 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:08:48,737 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:08:48,739 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:08:48,742 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:08:48,744 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:08:48,863 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:08:48,864 [config.py:install_language()] - Using system lang 2023-05-13 22:08:48,866 [config.py:install_language()] - Using lang en 2023-05-13 22:08:48,881 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:08:48,884 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:08:49,452 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:08:49,466 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:08:49,486 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:08:49,487 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:08:49,488 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:08:49,488 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:08:49,578 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:08:49,624 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:08:49,647 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:08:49,648 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:08:49,664 [_logging.py:info()] - Websocket connected 2023-05-13 22:08:49,665 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:08:49,704 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:08:49,729 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:08:49,753 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:08:49,970 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:08:49,973 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:08:49,973 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:08:49,973 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:08:49,974 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:08:49,974 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:08:49,975 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:08:50,259 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:08:50,262 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 22:08:50,262 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 22:08:50,284 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:08:50,285 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:08:50,311 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:08:50,312 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:08:50,313 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:08:50,314 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:08:50,315 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:08:50,359 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:08:52,154 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:08:52,155 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:08:52,180 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:08:52,182 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:09:47,564 [printer.py:change_state()] - Changing state from 'error' to 'disconnected' 2023-05-13 22:09:47,565 [printer.py:change_state()] - Adding callback for state: disconnected 2023-05-13 22:09:47,567 [screen.py:state_disconnected()] - ### Going to disconnected 2023-05-13 22:09:47,579 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:09:47,606 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:09:47,629 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:09:47,629 [screen.py:init_printer()] - Klipper not connected 2023-05-13 22:09:51,152 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:09:51,175 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:09:51,199 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:09:51,230 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:09:51,233 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:09:51,233 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:09:51,233 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:09:51,234 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:09:51,234 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:09:51,235 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:09:51,521 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:09:51,523 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-05-13 22:09:51,524 [printer.py:change_state()] - Adding callback for state: startup 2023-05-13 22:09:51,545 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:09:51,546 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:09:51,571 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:09:51,572 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:09:51,573 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:09:51,574 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:09:51,575 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:09:54,154 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:09:54,155 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:09:54,180 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:09:54,181 [screen.py:init_tempstore()] - Temperature store size: 1200 --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-03-11 10:25:36,725 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-03-11 10:25:37,008 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-03-11 10:25:37,011 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-03-11 10:25:37,049 [config.py:log_config()] - ===== Config File ===== ======================= 2023-03-11 10:25:37,051 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-03-11 10:25:37,054 [config.py:__init__()] - Configuration validated succesfuly 2023-03-11 10:25:37,057 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-03-11 10:25:37,185 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-03-11 10:25:37,186 [config.py:install_language()] - Using system lang 2023-03-11 10:25:37,188 [config.py:install_language()] - Using lang en 2023-03-11 10:25:37,206 [screen.py:__init__()] - Screen resolution: 1024x600 2023-03-11 10:25:37,209 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-03-11 10:25:38,346 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-03-11 10:25:38,361 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-03-11 10:25:38,384 [screen.py:initial_connection()] - Default printer: None 2023-03-11 10:25:38,385 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-03-11 10:25:38,386 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-03-11 10:25:38,386 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-03-11 10:25:38,481 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-03-11 10:25:38,536 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:38,561 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-03-11 10:25:38,562 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-03-11 10:25:38,579 [_logging.py:info()] - Websocket connected 2023-03-11 10:25:38,580 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-03-11 10:25:38,625 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-03-11 10:25:38,665 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-03-11 10:25:38,690 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-03-11 10:25:38,722 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-03-11 10:25:38,725 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-03-11 10:25:38,726 [printer.py:reinit()] - # Extruders: 1 2023-03-11 10:25:38,726 [printer.py:reinit()] - # Temperature devices: 1 2023-03-11 10:25:38,726 [printer.py:reinit()] - # Fans: 1 2023-03-11 10:25:38,727 [printer.py:reinit()] - # Output pins: 0 2023-03-11 10:25:38,728 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-03-11 10:25:39,013 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-03-11 10:25:39,016 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-03-11 10:25:39,017 [printer.py:change_state()] - Adding callback for state: startup 2023-03-11 10:25:39,051 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:39,052 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:39,082 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:39,084 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:39,085 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-03-11 10:25:39,086 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-03-11 10:25:39,088 [screen.py:init_printer()] - Printer initialized 2023-03-11 10:25:41,495 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-03-11 10:25:41,496 [printer.py:init_temp_store()] - Temp store: [] 2023-03-11 10:25:41,534 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-03-11 10:25:41,535 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-03-11 10:25:49,584 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-03-11 10:25:49,585 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-03-11 10:25:49,590 [screen.py:_load_panel()] - Loading panel: menu 2023-03-11 10:25:49,592 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-03-11 10:25:49,775 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-03-11 10:25:49,799 [menu.py:arrangeMenuItems()] - X > power 2023-03-11 10:25:49,807 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-13 22:14:00,411 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 22:14:00,433 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:14:08,182 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:14:08,370 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:14:08,373 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:14:08,404 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:14:08,406 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:14:08,409 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:14:08,410 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:14:08,530 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:14:08,531 [config.py:install_language()] - Using system lang 2023-05-13 22:14:08,533 [config.py:install_language()] - Using lang en 2023-05-13 22:14:08,547 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:14:08,550 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:14:09,121 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:14:09,135 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:14:09,156 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:14:09,157 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:14:09,158 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:14:09,159 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:14:09,253 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:14:09,299 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:09,321 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:14:09,323 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:14:09,338 [_logging.py:info()] - Websocket connected 2023-05-13 22:14:09,339 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:14:09,392 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:09,425 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:14:09,449 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:14:09,708 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:14:09,712 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:14:09,712 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:14:09,712 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:14:09,713 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:14:09,713 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:14:09,714 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:14:09,998 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:14:10,001 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-05-13 22:14:10,001 [printer.py:change_state()] - Adding callback for state: startup 2023-05-13 22:14:10,023 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:10,024 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:10,048 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:10,049 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:10,051 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:14:10,051 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:14:10,053 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:14:11,997 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:11,998 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:12,031 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:12,033 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:13,737 [KlippyWebsocket.py:on_close()] - Server Shutdown 2023-05-13 22:14:13,740 [KlippyWebsocket.py:on_close()] - Moonraker Websocket Closed 2023-05-13 22:14:13,757 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:14:13,766 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:14:13,785 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:14:13,808 [KlippyRest.py:send_request()] - host=127.0.0.1, port=7125>>Max retries exceeded with url>>Failed to establish a new connection>>[Errno 111] Connection refused 2023-05-13 22:14:19,976 [KlippyWebsocket.py:reconnect()] - Attempting to reconnect 2023-05-13 22:14:20,001 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:20,024 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:14:20,025 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:14:20,041 [_logging.py:info()] - Websocket connected 2023-05-13 22:14:20,041 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:14:20,063 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:20,092 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:14:20,121 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:14:20,328 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:14:20,330 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:14:20,331 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:14:20,331 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:14:20,332 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:14:20,332 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:14:20,333 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:14:20,579 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:14:20,582 [printer.py:change_state()] - Changing state from 'startup' to 'error' 2023-05-13 22:14:20,583 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 22:14:20,604 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:20,605 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:20,629 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:20,631 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:20,632 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:14:20,633 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:14:20,633 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:14:20,645 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:14:22,994 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:22,995 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:23,023 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:23,024 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:23,974 [KlippyWebsocket.py:reconnect()] - Attempting to reconnect 2023-05-13 22:14:23,994 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:24,016 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:14:24,017 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:14:24,031 [_logging.py:info()] - Websocket connected 2023-05-13 22:14:24,032 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:14:24,053 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:24,076 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:14:24,100 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:14:24,336 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:14:24,339 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:14:24,340 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:14:24,340 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:14:24,340 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:14:24,340 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:14:24,341 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:14:24,630 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:14:24,659 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:24,660 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:24,685 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:24,686 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:24,688 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:14:24,688 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:14:24,689 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:14:26,993 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:26,993 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:27,020 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:27,021 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:33,720 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 22:14:33,743 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:14:41,052 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:14:41,236 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:14:41,238 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:14:41,270 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:14:41,272 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:14:41,275 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:14:41,277 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:14:41,396 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:14:41,397 [config.py:install_language()] - Using system lang 2023-05-13 22:14:41,398 [config.py:install_language()] - Using lang en 2023-05-13 22:14:41,414 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:14:41,417 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:14:41,989 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:14:42,003 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:14:42,024 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:14:42,024 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:14:42,025 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:14:42,026 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:14:42,115 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:14:42,161 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:42,182 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:14:42,184 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:14:42,199 [_logging.py:info()] - Websocket connected 2023-05-13 22:14:42,200 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:14:42,239 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:14:42,264 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:14:42,288 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:14:42,375 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:14:42,378 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:14:42,379 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:14:42,379 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:14:42,379 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:14:42,380 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:14:42,380 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:14:42,674 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:14:42,677 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 22:14:42,678 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 22:14:42,700 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:42,701 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:42,726 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:42,727 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:14:42,729 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:14:42,729 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:14:42,730 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:14:42,775 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:14:44,999 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:14:45,000 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:14:45,024 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:14:45,026 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:15:12,157 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 22:15:12,184 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:15:19,536 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:15:19,721 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:15:19,724 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:15:19,755 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:15:19,757 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:15:19,760 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:15:19,761 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:15:19,880 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:15:19,881 [config.py:install_language()] - Using system lang 2023-05-13 22:15:19,883 [config.py:install_language()] - Using lang en 2023-05-13 22:15:19,897 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:15:19,900 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:15:20,469 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:15:20,483 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:15:20,503 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:15:20,504 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:15:20,505 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:15:20,505 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:15:20,595 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:15:20,642 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:15:20,663 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:15:20,664 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:15:20,681 [_logging.py:info()] - Websocket connected 2023-05-13 22:15:20,682 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:15:20,721 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:15:20,746 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:15:20,769 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:15:20,964 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:15:20,967 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:15:20,968 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:15:20,968 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:15:20,968 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:15:20,968 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:15:20,969 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:15:21,254 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:15:21,257 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-13 22:15:21,258 [printer.py:change_state()] - Adding callback for state: error 2023-05-13 22:15:21,280 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:15:21,281 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:15:21,305 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:15:21,307 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:15:21,308 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:15:21,309 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:15:21,310 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:15:21,356 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:15:23,993 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:15:23,994 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:15:24,019 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:15:24,020 [screen.py:init_tempstore()] - Temperature store size: 1200 --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:17:27,092 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:17:27,489 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:17:27,490 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:17:27,541 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:17:27,544 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:17:27,551 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:17:27,553 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:17:27,834 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:17:27,835 [config.py:install_language()] - Using system lang 2023-05-13 22:17:27,837 [config.py:install_language()] - Using lang en 2023-05-13 22:17:27,856 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:17:27,860 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:17:29,742 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:17:29,759 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:17:29,781 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:17:29,782 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:17:29,783 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:17:29,784 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:17:29,907 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:17:29,965 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:17:29,990 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:17:29,992 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:17:30,012 [_logging.py:info()] - Websocket connected 2023-05-13 22:17:30,012 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:17:30,062 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:17:30,136 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:17:30,137 [screen.py:init_printer()] - Klipper not connected 2023-05-13 22:17:33,830 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:17:33,859 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:17:33,860 [screen.py:init_printer()] - Klipper not connected 2023-05-13 22:17:36,786 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:17:36,815 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:17:36,816 [screen.py:init_printer()] - Klipper not connected 2023-05-13 22:17:39,311 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-13 22:17:39,343 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-13 22:17:48,257 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-13 22:17:48,455 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-13 22:17:48,458 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-13 22:17:48,491 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-13 22:17:48,493 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-13 22:17:48,496 [config.py:__init__()] - Configuration validated succesfuly 2023-05-13 22:17:48,498 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-13 22:17:48,622 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-13 22:17:48,624 [config.py:install_language()] - Using system lang 2023-05-13 22:17:48,626 [config.py:install_language()] - Using lang en 2023-05-13 22:17:48,642 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-13 22:17:48,646 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-13 22:17:49,274 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-13 22:17:49,290 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-13 22:17:49,312 [screen.py:initial_connection()] - Default printer: None 2023-05-13 22:17:49,313 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-13 22:17:49,314 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-13 22:17:49,315 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-13 22:17:49,414 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-13 22:17:49,468 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:17:49,492 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-13 22:17:49,494 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-13 22:17:49,518 [_logging.py:info()] - Websocket connected 2023-05-13 22:17:49,518 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-13 22:17:49,609 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-13 22:17:49,637 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-13 22:17:49,664 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-13 22:17:49,702 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-13 22:17:49,705 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-13 22:17:49,706 [printer.py:reinit()] - # Extruders: 1 2023-05-13 22:17:49,706 [printer.py:reinit()] - # Temperature devices: 1 2023-05-13 22:17:49,706 [printer.py:reinit()] - # Fans: 1 2023-05-13 22:17:49,707 [printer.py:reinit()] - # Output pins: 0 2023-05-13 22:17:49,708 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-13 22:17:49,995 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-13 22:17:49,998 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-05-13 22:17:49,998 [printer.py:change_state()] - Adding callback for state: startup 2023-05-13 22:17:50,026 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:17:50,027 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:17:50,059 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:17:50,061 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-13 22:17:50,062 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-13 22:17:50,063 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-13 22:17:50,065 [screen.py:init_printer()] - Printer initialized 2023-05-13 22:17:52,790 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-13 22:17:52,792 [printer.py:init_temp_store()] - Temp store: [] 2023-05-13 22:17:52,831 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-13 22:17:52,834 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-14 13:47:34,312 [screen.py:show_screensaver()] - Showing Screensaver 2023-05-14 13:47:39,569 [screen.py:close_screensaver()] - Closing Screensaver 2023-05-14 13:47:39,594 [screen.py:wake_screen()] - Screen wake up 2023-05-14 13:47:41,177 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-14 13:47:41,178 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-14 13:47:41,182 [screen.py:_load_panel()] - Loading panel: menu 2023-05-14 13:47:41,182 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-14 13:47:41,297 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-14 13:47:41,307 [menu.py:arrangeMenuItems()] - X > power 2023-05-14 13:47:41,312 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-14 13:47:43,675 [screen.py:_load_panel()] - Loading panel: system 2023-05-14 13:47:43,675 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-14 13:47:43,749 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-14 13:47:43,760 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-14 13:47:43,772 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-14 13:47:43,784 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-14 13:47:43,788 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-14 13:47:43,792 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-14 13:47:43,803 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-14 13:47:43,815 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-14 13:47:43,821 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-14 13:47:43,835 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-14 13:47:43,861 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-14 13:47:43,863 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-14 13:47:43,868 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-14 13:47:43,871 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-14 13:47:43,874 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-14 13:47:43,877 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-14 13:47:43,880 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-14 13:47:43,883 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-14 13:47:43,888 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-14 13:48:02,449 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-14 13:48:06,025 [KlippyGtk.py:remove_dialog()] - Removing Dialog 2023-05-14 13:48:06,026 [system.py:reset_confirm()] - Recovering hard KlipperScreen 2023-05-14 13:48:06,066 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-14 13:48:06,069 [system.py:reset_repo()] - Sending machine.update.recover name: KlipperScreen hard: True 2023-05-14 13:48:06,114 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-14 13:48:13,495 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-14 13:48:13,682 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-14 13:48:13,685 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-14 13:48:13,717 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-14 13:48:13,718 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-14 13:48:13,721 [config.py:__init__()] - Configuration validated succesfuly 2023-05-14 13:48:13,723 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-14 13:48:13,842 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-14 13:48:13,843 [config.py:install_language()] - Using system lang 2023-05-14 13:48:13,845 [config.py:install_language()] - Using lang en 2023-05-14 13:48:13,860 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-14 13:48:13,863 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-14 13:48:14,442 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-14 13:48:14,456 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-14 13:48:14,477 [screen.py:initial_connection()] - Default printer: None 2023-05-14 13:48:14,477 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-14 13:48:14,478 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-14 13:48:14,479 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-14 13:48:14,568 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-14 13:48:14,613 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-14 13:48:14,635 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-14 13:48:14,636 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-14 13:48:14,653 [_logging.py:info()] - Websocket connected 2023-05-14 13:48:14,654 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-14 13:48:14,699 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-14 13:48:14,724 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-14 13:48:14,749 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-14 13:48:14,800 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-14 13:48:14,804 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-14 13:48:14,804 [printer.py:reinit()] - # Extruders: 1 2023-05-14 13:48:14,804 [printer.py:reinit()] - # Temperature devices: 1 2023-05-14 13:48:14,805 [printer.py:reinit()] - # Fans: 1 2023-05-14 13:48:14,805 [printer.py:reinit()] - # Output pins: 0 2023-05-14 13:48:14,806 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-14 13:48:15,093 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-14 13:48:15,096 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-14 13:48:15,097 [printer.py:change_state()] - Adding callback for state: error 2023-05-14 13:48:15,119 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-14 13:48:15,120 [printer.py:init_temp_store()] - Temp store: [] 2023-05-14 13:48:15,144 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-14 13:48:15,146 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-14 13:48:15,147 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-14 13:48:15,148 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-14 13:48:15,149 [screen.py:init_printer()] - Printer initialized 2023-05-14 13:48:15,194 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-14 13:48:17,330 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-14 13:48:17,331 [printer.py:init_temp_store()] - Temp store: [] 2023-05-14 13:48:17,356 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-14 13:48:17,357 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-14 13:48:40,013 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-14 13:48:40,014 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-14 13:48:40,019 [screen.py:_load_panel()] - Loading panel: menu 2023-05-14 13:48:40,020 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-14 13:48:40,138 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-14 13:48:40,147 [menu.py:arrangeMenuItems()] - X > power 2023-05-14 13:48:40,153 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-14 13:48:41,483 [screen.py:_load_panel()] - Loading panel: system 2023-05-14 13:48:41,483 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-14 13:48:41,549 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-14 13:48:41,561 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-14 13:48:41,573 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-14 13:48:41,585 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-14 13:48:41,589 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-14 13:48:41,593 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-14 13:48:41,604 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-14 13:48:41,616 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-14 13:48:41,623 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-14 13:48:41,639 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-14 13:48:41,664 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-14 13:48:41,665 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-14 13:48:41,671 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-14 13:48:41,674 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-14 13:48:41,677 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-14 13:48:41,680 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-14 13:48:41,683 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-14 13:48:41,687 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-14 13:48:41,693 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-14 14:48:42,310 [screen.py:show_screensaver()] - Showing Screensaver --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-14 19:17:20,926 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-14 19:17:21,212 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-14 19:17:21,215 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-14 19:17:21,250 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-14 19:17:21,252 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-14 19:17:21,255 [config.py:__init__()] - Configuration validated succesfuly 2023-05-14 19:17:21,257 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-14 19:17:21,386 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-14 19:17:21,387 [config.py:install_language()] - Using system lang 2023-05-14 19:17:21,390 [config.py:install_language()] - Using lang en 2023-05-14 19:17:21,410 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-14 19:17:21,414 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-14 19:17:22,446 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-14 19:17:22,469 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-14 19:17:22,495 [screen.py:initial_connection()] - Default printer: None 2023-05-14 19:17:22,496 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-14 19:17:22,497 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-14 19:17:22,498 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-14 19:17:22,597 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-14 19:17:22,655 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-14 19:17:22,680 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-14 19:17:22,682 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-14 19:17:22,700 [_logging.py:info()] - Websocket connected 2023-05-14 19:17:22,701 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-14 19:17:22,748 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-14 19:17:22,787 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-14 19:17:22,813 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-14 19:17:22,846 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-14 19:17:22,850 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-14 19:17:22,850 [printer.py:reinit()] - # Extruders: 1 2023-05-14 19:17:22,851 [printer.py:reinit()] - # Temperature devices: 1 2023-05-14 19:17:22,851 [printer.py:reinit()] - # Fans: 1 2023-05-14 19:17:22,852 [printer.py:reinit()] - # Output pins: 0 2023-05-14 19:17:22,853 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-14 19:17:23,139 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-14 19:17:23,142 [printer.py:change_state()] - Changing state from 'disconnected' to 'startup' 2023-05-14 19:17:23,142 [printer.py:change_state()] - Adding callback for state: startup 2023-05-14 19:17:23,171 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-14 19:17:23,173 [printer.py:init_temp_store()] - Temp store: [] 2023-05-14 19:17:23,199 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-14 19:17:23,201 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-14 19:17:23,202 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-14 19:17:23,203 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-14 19:17:23,204 [screen.py:init_printer()] - Printer initialized 2023-05-14 19:17:25,006 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-14 19:17:25,007 [printer.py:init_temp_store()] - Temp store: [] 2023-05-14 19:17:25,037 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-14 19:17:25,038 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-15 10:24:20,443 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-15 10:24:20,443 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-15 10:24:20,449 [screen.py:_load_panel()] - Loading panel: menu 2023-05-15 10:24:20,450 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-15 10:24:20,577 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-15 10:24:20,588 [menu.py:arrangeMenuItems()] - X > power 2023-05-15 10:24:20,593 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-15 10:24:21,372 [screen.py:_load_panel()] - Loading panel: system 2023-05-15 10:24:21,373 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-15 10:24:21,449 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-15 10:24:21,461 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-15 10:24:21,477 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-15 10:24:21,489 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-15 10:24:21,494 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-15 10:24:21,498 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-15 10:24:21,509 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-15 10:24:21,521 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-15 10:24:21,528 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-15 10:24:21,542 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-15 10:24:21,565 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-15 10:24:21,567 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-15 10:24:21,571 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-15 10:24:21,575 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-15 10:24:21,578 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-15 10:24:21,581 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-15 10:24:21,586 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-15 10:24:21,590 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-15 10:24:21,595 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-15 10:24:59,470 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-15 10:25:50,971 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-15 10:25:51,003 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-15 10:25:58,393 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-15 10:25:58,577 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-15 10:25:58,580 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-15 10:25:58,613 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-15 10:25:58,615 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-15 10:25:58,618 [config.py:__init__()] - Configuration validated succesfuly 2023-05-15 10:25:58,620 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-15 10:25:58,740 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-15 10:25:58,741 [config.py:install_language()] - Using system lang 2023-05-15 10:25:58,742 [config.py:install_language()] - Using lang en 2023-05-15 10:25:58,757 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-15 10:25:58,760 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-15 10:25:59,333 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-15 10:25:59,349 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-15 10:25:59,369 [screen.py:initial_connection()] - Default printer: None 2023-05-15 10:25:59,370 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-15 10:25:59,371 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-15 10:25:59,371 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-15 10:25:59,460 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-15 10:25:59,506 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-15 10:25:59,527 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-15 10:25:59,528 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-15 10:25:59,544 [_logging.py:info()] - Websocket connected 2023-05-15 10:25:59,545 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-15 10:25:59,584 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-15 10:25:59,611 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-15 10:25:59,640 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-15 10:25:59,704 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-15 10:25:59,707 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-15 10:25:59,708 [printer.py:reinit()] - # Extruders: 1 2023-05-15 10:25:59,708 [printer.py:reinit()] - # Temperature devices: 1 2023-05-15 10:25:59,708 [printer.py:reinit()] - # Fans: 1 2023-05-15 10:25:59,708 [printer.py:reinit()] - # Output pins: 0 2023-05-15 10:25:59,709 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-15 10:25:59,995 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-15 10:25:59,998 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-15 10:25:59,998 [printer.py:change_state()] - Adding callback for state: error 2023-05-15 10:26:00,020 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-15 10:26:00,021 [printer.py:init_temp_store()] - Temp store: [] 2023-05-15 10:26:00,045 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-15 10:26:00,047 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-15 10:26:00,048 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-15 10:26:00,049 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-15 10:26:00,050 [screen.py:init_printer()] - Printer initialized 2023-05-15 10:26:00,094 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-15 10:26:02,813 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-15 10:26:02,814 [printer.py:init_temp_store()] - Temp store: [] 2023-05-15 10:26:02,839 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-15 10:26:02,840 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-15 10:42:30,502 [screen.py:_go_to_submenu()] - #### Go to submenu 2023-05-15 10:42:30,503 [screen.py:_go_to_submenu()] - #### Menu __splashscreen 2023-05-15 10:42:30,508 [screen.py:_load_panel()] - Loading panel: menu 2023-05-15 10:42:30,509 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/menu.py 2023-05-15 10:42:30,627 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > 2023-05-15 10:42:30,636 [menu.py:arrangeMenuItems()] - X > power 2023-05-15 10:42:30,641 [menu.py:evaluate_enable()] - moonraker connected True 2023-05-15 10:42:31,829 [screen.py:_load_panel()] - Loading panel: system 2023-05-15 10:42:31,829 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/system.py 2023-05-15 10:42:31,897 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status 2023-05-15 10:42:31,909 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-15 10:42:31,920 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-15 10:42:31,932 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-15 10:42:31,936 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-15 10:42:31,940 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-15 10:42:31,951 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-15 10:42:31,962 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-15 10:42:31,969 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-15 10:42:31,982 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen > > system 2023-05-15 10:42:32,005 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/machine/update/status?refresh=false 2023-05-15 10:42:32,007 [system.py:update_program_info()] - Invalid KlipperScreen ? 2023-05-15 10:42:32,012 [system.py:_already_updated()] - crowsnest v3.0.7-3 2023-05-15 10:42:32,016 [system.py:_already_updated()] - klipper v0.11.0-198 2023-05-15 10:42:32,019 [system.py:_already_updated()] - mainsail v2.5.1 2023-05-15 10:42:32,022 [system.py:_already_updated()] - mainsail-config v1.0.0-11 2023-05-15 10:42:32,025 [system.py:_already_updated()] - moonraker v0.8.0-40 2023-05-15 10:42:32,028 [system.py:_already_updated()] - sonar v0.1.2-0 2023-05-15 10:42:32,033 [system.py:_already_updated()] - timelapse v0.0.1-132 2023-05-15 10:47:06,471 [KlippyGtk.py:Dialog()] - Showing dialog 2023-05-15 10:47:06,492 [screen.py:_websocket_callback()] - notify_update_response:Error Recovering KlipperScreen --------------------KlipperScreen Log Start-------------------- Git Version: 18f02f6 2023-05-15 10:47:13,887 [screen.py:main()] - KlipperScreen version: 18f02f6 2023-05-15 10:47:14,076 [config.py:get_config_file_location()] - Passed config (-c): /home/biqu/KlipperScreen.conf 2023-05-15 10:47:14,078 [config.py:__init__()] - Config path location: /home/biqu/printer_data/config/KlipperScreen.conf 2023-05-15 10:47:14,110 [config.py:log_config()] - ===== Config File ===== ======================= 2023-05-15 10:47:14,112 [config.py:__init__()] - ====== Saved Def ====== ======================= 2023-05-15 10:47:14,115 [config.py:__init__()] - Configuration validated succesfuly 2023-05-15 10:47:14,117 [config.py:__init__()] - Configured printers: [ { "Printer": { "moonraker_host": "127.0.0.1", "moonraker_port": "7125", "moonraker_api_key": "" } } ] 2023-05-15 10:47:14,236 [config.py:create_translations()] - Selected lang: None OS lang: en_US 2023-05-15 10:47:14,237 [config.py:install_language()] - Using system lang 2023-05-15 10:47:14,239 [config.py:install_language()] - Using lang en 2023-05-15 10:47:14,253 [screen.py:__init__()] - Screen resolution: 1024x600 2023-05-15 10:47:14,256 [KlippyGtk.py:__init__()] - Font size: 20.7 (medium) 2023-05-15 10:47:14,835 [screen.py:set_screenblanking_timeout()] - Changing screen blanking to: 3600 2023-05-15 10:47:14,849 [screen.py:set_screenblanking_timeout()] - Using DPMS 2023-05-15 10:47:14,869 [screen.py:initial_connection()] - Default printer: None 2023-05-15 10:47:14,870 [screen.py:connect_printer()] - Connecting to printer: Printer 2023-05-15 10:47:14,871 [screen.py:_load_panel()] - Loading panel: splash_screen 2023-05-15 10:47:14,871 [screen.py:_load_panel()] - Panel path: /home/biqu/KlipperScreen/panels/splash_screen.py 2023-05-15 10:47:14,961 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-15 10:47:15,009 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-15 10:47:15,030 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/access/oneshot_token 2023-05-15 10:47:15,032 [KlippyWebsocket.py:connect()] - Starting websocket thread 2023-05-15 10:47:15,048 [_logging.py:info()] - Websocket connected 2023-05-15 10:47:15,049 [KlippyWebsocket.py:on_open()] - Moonraker Websocket Open 2023-05-15 10:47:15,087 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/info 2023-05-15 10:47:15,112 [KlippyRest.py:send_request()] - 404 Client Error>>Not Found for url>>http://127.0.0.1:7125/machine/device_power/devices 2023-05-15 10:47:15,136 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/info 2023-05-15 10:47:15,234 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?configfile 2023-05-15 10:47:15,237 [printer.py:reinit()] - Klipper version: v0.11.0-198-g33b18fd6 2023-05-15 10:47:15,237 [printer.py:reinit()] - # Extruders: 1 2023-05-15 10:47:15,237 [printer.py:reinit()] - # Temperature devices: 1 2023-05-15 10:47:15,237 [printer.py:reinit()] - # Fans: 1 2023-05-15 10:47:15,238 [printer.py:reinit()] - # Output pins: 0 2023-05-15 10:47:15,238 [KlippyWebsocket.py:object_subscription()] - Sending printer.objects.subscribe 2023-05-15 10:47:15,525 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/printer/objects/query?bed_mesh&configfile&display_status&extruder&fan&gcode_move&heater_bed&idle_timeout&pause_resume&print_stats&toolhead&virtual_sdcard&webhooks&motion_report&firmware_retraction&exclude_object&extruder&heater_bed&fan&filament_switch_sensor filament_sensor 2023-05-15 10:47:15,528 [printer.py:change_state()] - Changing state from 'disconnected' to 'error' 2023-05-15 10:47:15,528 [printer.py:change_state()] - Adding callback for state: error 2023-05-15 10:47:15,549 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-15 10:47:15,550 [printer.py:init_temp_store()] - Temp store: [] 2023-05-15 10:47:15,575 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-15 10:47:15,576 [screen.py:init_tempstore()] - Temperature store size: 1200 2023-05-15 10:47:15,578 [files.py:initialize()] - Gcodes path: /home/biqu/printer_data/gcodes 2023-05-15 10:47:15,578 [KlippyWebsocket.py:get_file_list()] - Sending server.files.list 2023-05-15 10:47:15,579 [screen.py:init_printer()] - Printer initialized 2023-05-15 10:47:15,623 [screen.py:attach_panel()] - Current panel hierarchy: splash_screen 2023-05-15 10:47:17,814 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/temperature_store 2023-05-15 10:47:17,815 [printer.py:init_temp_store()] - Temp store: [] 2023-05-15 10:47:17,840 [KlippyRest.py:send_request()] - Sending request to http://127.0.0.1:7125/server/config 2023-05-15 10:47:17,841 [screen.py:init_tempstore()] - Temperature store size: 1200