===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0%}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if printer.idle_timeout.state|upper == "IDLE" %}
	{% if last_extruder_temp.restore %} M109 S{last_extruder_temp.temp} {% endif %}
	{% endif %}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Extruder not hot enough'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[stepper_x]
step_pin = PC8
dir_pin = !PC9
enable_pin = !PA15
microsteps = 16
rotation_distance = 40
endstop_pin = tmc2130_stepper_x:virtual_endstop
position_endstop = 0
position_max = 200
homing_speed = 50

[tmc2130 stepper_x]
driver_sgt = 63
cs_pin = PD9
spi_bus = spi2
run_current = 1
sense_resistor = 0.075
diag1_pin = ^!PD3

[tmc2130 stepper_y]
cs_pin = PD8
spi_bus = spi2
run_current = 1
diag1_pin = ^!PD2
driver_sgt = 63

[tmc2130 stepper_z]
cs_pin = PB10
spi_bus = spi2
run_current = 1
diag1_pin = ^!PC3
driver_sgt = 63

[tmc2130 extruder]
cs_pin = PB2
spi_bus = spi2
run_current = 1
diag1_pin = ^!PC2
driver_sgt = 63

[stepper_y]
step_pin = PA10
dir_pin = !PA14
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD2
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PA9
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC3
position_endstop = 0.0
position_max = 200

[extruder]
step_pin = PB12
dir_pin = !PB11
enable_pin = !PA8
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC5
sensor_type = PT1000
sensor_pin = PA1
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = -270
max_temp = 300

[fan]
pin = PA4

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3A0059000C504B5735313920-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PD5, EXP1_3=PB3, EXP1_5=PB5, EXP1_7=PB7, EXP1_9=<GND>,
	EXP1_2=PD4,  EXP1_4=PD6, EXP1_6=PB4, EXP1_8=PB6, EXP1_10=<5V>,
	
	EXP2_1=PB14, EXP2_3=PB8, EXP2_5=PC10, EXP2_7=PC12,  EXP2_9=<GND>,
	EXP2_2=PB13, EXP2_4=PB9, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
=======================
Loaded MCU 'mcu' 112 commands (v0.11.0-271-g5f990f93 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.11.0-271-g5f990f93'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
webhooks client 281472970362496: {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
=============== Log rollover at Fri Sep  8 05:30:46 2023 ===============
INIT_TMC stepper_x
Stats 121.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2220 bytes_read=10414 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=16 freq=63932144  sysload=0.49 cputime=3.854 memavail=723896 print_time=124.625 buffer_time=0.151 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Unable to write tmc spi 'stepper_x' register CHOPCONF
Stats 122.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2346 bytes_read=10577 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63932283  sysload=0.49 cputime=3.880 memavail=723912 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 123.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000014 bytes_write=2352 bytes_read=10649 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63932430  sysload=0.49 cputime=3.895 memavail=723444 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 124.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000014 bytes_write=2358 bytes_read=10721 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63932585  sysload=0.49 cputime=3.910 memavail=723456 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 125.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000014 bytes_write=2364 bytes_read=10779 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63932743  sysload=0.45 cputime=3.925 memavail=723712 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 126.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000014 bytes_write=2370 bytes_read=10837 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63932893  sysload=0.45 cputime=3.940 memavail=723208 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 127.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000014 bytes_write=2376 bytes_read=10909 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63933043  sysload=0.45 cputime=3.955 memavail=723172 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 128.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2382 bytes_read=10981 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63933194  sysload=0.45 cputime=3.971 memavail=723384 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 129.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2388 bytes_read=11039 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63933353  sysload=0.45 cputime=3.986 memavail=723448 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 130.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2394 bytes_read=11109 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63933518  sysload=0.41 cputime=4.001 memavail=723224 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-194.9 pwm=0.000
Stats 131.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2400 bytes_read=11163 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63933684  sysload=0.41 cputime=4.016 memavail=723480 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 132.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2406 bytes_read=11217 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63933850  sysload=0.41 cputime=4.031 memavail=723412 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 133.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2412 bytes_read=11298 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934016  sysload=0.41 cputime=4.047 memavail=723164 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 134.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2418 bytes_read=11353 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934183  sysload=0.41 cputime=4.062 memavail=722920 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 135.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2424 bytes_read=11411 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934351  sysload=0.38 cputime=4.076 memavail=723252 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 136.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2430 bytes_read=11483 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934529  sysload=0.38 cputime=4.092 memavail=723680 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 137.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2436 bytes_read=11541 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934721  sysload=0.38 cputime=4.107 memavail=723180 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 138.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2442 bytes_read=11613 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934918  sysload=0.38 cputime=4.123 memavail=723440 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 139.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2448 bytes_read=11685 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935118  sysload=0.38 cputime=4.139 memavail=722944 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 140.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2454 bytes_read=11743 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935325  sysload=0.43 cputime=4.154 memavail=722944 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 141.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2460 bytes_read=11801 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935529  sysload=0.43 cputime=4.169 memavail=723448 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 142.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2466 bytes_read=11873 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935730  sysload=0.43 cputime=4.184 memavail=723716 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 143.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2472 bytes_read=11931 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935925  sysload=0.43 cputime=4.197 memavail=724012 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 144.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2478 bytes_read=12003 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936112  sysload=0.43 cputime=4.213 memavail=724012 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 145.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2484 bytes_read=12075 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936288  sysload=0.40 cputime=4.228 memavail=724024 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 146.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2490 bytes_read=12133 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936456  sysload=0.40 cputime=4.243 memavail=723972 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 147.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2496 bytes_read=12191 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936620  sysload=0.40 cputime=4.257 memavail=724528 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 148.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2502 bytes_read=12263 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936779  sysload=0.40 cputime=4.273 memavail=724276 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 149.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2508 bytes_read=12335 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936931  sysload=0.40 cputime=4.287 memavail=724228 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 150.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2514 bytes_read=12393 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937083  sysload=0.44 cputime=4.302 memavail=724052 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 151.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2520 bytes_read=12465 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937236  sysload=0.44 cputime=4.317 memavail=724052 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 152.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2526 bytes_read=12523 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937395  sysload=0.44 cputime=4.332 memavail=724304 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 153.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2538 bytes_read=12597 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937704  sysload=0.44 cputime=4.347 memavail=724556 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 154.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2544 bytes_read=12683 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937855  sysload=0.44 cputime=4.363 memavail=723760 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 155.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2550 bytes_read=12741 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938012  sysload=0.41 cputime=4.378 memavail=723848 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 156.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2556 bytes_read=12799 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938176  sysload=0.41 cputime=4.393 memavail=724100 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 157.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2562 bytes_read=12871 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938343  sysload=0.41 cputime=4.408 memavail=724352 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 158.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2568 bytes_read=12929 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938512  sysload=0.41 cputime=4.422 memavail=724300 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 159.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2574 bytes_read=13001 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938690  sysload=0.41 cputime=4.438 memavail=724356 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 160.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2580 bytes_read=13073 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938879  sysload=0.38 cputime=4.453 memavail=724140 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 161.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2586 bytes_read=13131 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939088  sysload=0.38 cputime=4.467 memavail=723888 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 162.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2592 bytes_read=13189 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939318  sysload=0.38 cputime=4.482 memavail=724700 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 163.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2598 bytes_read=13261 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939557  sysload=0.38 cputime=4.497 memavail=724448 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 164.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2604 bytes_read=13333 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939800  sysload=0.38 cputime=4.512 memavail=724460 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 165.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2610 bytes_read=13391 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940050  sysload=0.35 cputime=4.527 memavail=724208 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 166.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2616 bytes_read=13463 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940300  sysload=0.35 cputime=4.542 memavail=724460 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 167.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2622 bytes_read=13521 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940553  sysload=0.35 cputime=4.557 memavail=724712 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.1 pwm=0.000
Stats 168.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2628 bytes_read=13579 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940802  sysload=0.35 cputime=4.572 memavail=724588 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 169.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2634 bytes_read=13665 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941054  sysload=0.35 cputime=4.588 memavail=723832 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 170.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2640 bytes_read=13723 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941308  sysload=0.32 cputime=4.603 memavail=723840 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 171.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2646 bytes_read=13781 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941568  sysload=0.32 cputime=4.618 memavail=723840 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 172.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2652 bytes_read=13853 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941825  sysload=0.32 cputime=4.633 memavail=723336 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 173.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2658 bytes_read=13911 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942076  sysload=0.32 cputime=4.648 memavail=723336 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 174.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2664 bytes_read=13983 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942308  sysload=0.32 cputime=4.663 memavail=722588 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.0 pwm=0.000
Stats 175.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2670 bytes_read=14055 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942517  sysload=0.29 cputime=4.679 memavail=722592 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 176.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2676 bytes_read=14113 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942705  sysload=0.29 cputime=4.694 memavail=722808 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 177.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2682 bytes_read=14171 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942876  sysload=0.29 cputime=4.709 memavail=722344 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 178.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2688 bytes_read=14243 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943030  sysload=0.29 cputime=4.724 memavail=722344 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 179.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2694 bytes_read=14315 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943172  sysload=0.29 cputime=4.740 memavail=722092 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 180.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2700 bytes_read=14373 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943301  sysload=0.27 cputime=4.754 memavail=722100 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 181.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2706 bytes_read=14445 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943419  sysload=0.27 cputime=4.770 memavail=722100 print_time=124.625 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.2 pwm=0.000
Stats 235.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=3036 bytes_read=17981 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941202  sysload=0.27 cputime=5.526 memavail=720492 print_time=238.945 buffer_time=0.493 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 281472970362496: Disconnected
Restarting printer
Start printer at Fri Sep  8 05:32:42 2023 (1694151162.3 237.6)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0%}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if printer.idle_timeout.state|upper == "IDLE" %}
	{% if last_extruder_temp.restore %} M109 S{last_extruder_temp.temp} {% endif %}
	{% endif %}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Extruder not hot enough'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[stepper_x]
step_pin = PC8
dir_pin = !PC9
enable_pin = !PA15
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD3
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_y]
step_pin = PA10
dir_pin = !PA14
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD2
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PA9
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC3
position_endstop = 0.0
position_max = 200

[extruder]
step_pin = PB12
dir_pin = !PB11
enable_pin = !PA8
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC5
sensor_type = PT1000
sensor_pin = PA1
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[fan]
pin = PA4

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3A0059000C504B5735313920-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PD5, EXP1_3=PB3, EXP1_5=PB5, EXP1_7=PB7, EXP1_9=<GND>,
	EXP1_2=PD4,  EXP1_4=PD6, EXP1_6=PB4, EXP1_8=PB6, EXP1_10=<5V>,
	
	EXP2_1=PB14, EXP2_3=PB8, EXP2_5=PC10, EXP2_7=PC12,  EXP2_9=<GND>,
	EXP2_2=PB13, EXP2_4=PB9, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281472970479504: New connection
webhooks client 281472970479504: Client info {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
Loaded MCU 'mcu' 112 commands (v0.11.0-271-g5f990f93 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for extruder
Stats 238.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1023 bytes_read=4244 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63934374  sysload=0.27 cputime=6.372 memavail=720012 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281472970479504
webhooks: registering remote method 'reboot_machine' for connection id: 281472970479504
webhooks: registering remote method 'pause_job_queue' for connection id: 281472970479504
webhooks: registering remote method 'start_job_queue' for connection id: 281472970479504
Stats 239.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1029 bytes_read=4274 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939401  sysload=0.27 cputime=6.409 memavail=719772 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
MCU 'mcu' shutdown: ADC out of range
clocksync state: mcu_freq=64000000 last_clock=217325290 clock_est=(238.595 134893751 63939401.962) min_half_rtt=0.000140 min_rtt_time=238.793 time_avg=238.594(0.075) clock_avg=134893751.988(4767688.375) pred_variance=2921076279.623
Dumping serial stats: bytes_write=1029 bytes_read=4314 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 238.387087 238.387087 9: seq: 1e, identify offset=560 count=40
Sent 1 238.388467 238.388467 9: seq: 1f, identify offset=600 count=40
Sent 2 238.389769 238.389769 9: seq: 10, identify offset=640 count=40
Sent 3 238.391094 238.391094 9: seq: 11, identify offset=680 count=40
Sent 4 238.392470 238.392470 9: seq: 12, identify offset=720 count=40
Sent 5 238.393782 238.393782 9: seq: 13, identify offset=760 count=40
Sent 6 238.395103 238.395103 9: seq: 14, identify offset=800 count=40
Sent 7 238.396458 238.396458 9: seq: 15, identify offset=840 count=40
Sent 8 238.397774 238.397774 9: seq: 16, identify offset=880 count=40
Sent 9 238.399091 238.399091 9: seq: 17, identify offset=920 count=40
Sent 10 238.400469 238.400469 9: seq: 18, identify offset=960 count=40
Sent 11 238.401768 238.401768 9: seq: 19, identify offset=1000 count=40
Sent 12 238.403091 238.403091 9: seq: 1a, identify offset=1040 count=40
Sent 13 238.404463 238.404463 9: seq: 1b, identify offset=1080 count=40
Sent 14 238.405917 238.405917 9: seq: 1c, identify offset=1120 count=40
Sent 15 238.407209 238.407209 9: seq: 1d, identify offset=1160 count=40
Sent 16 238.408465 238.408465 9: seq: 1e, identify offset=1200 count=40
Sent 17 238.409759 238.409759 9: seq: 1f, identify offset=1240 count=40
Sent 18 238.411047 238.411047 9: seq: 10, identify offset=1280 count=40
Sent 19 238.412310 238.412310 9: seq: 11, identify offset=1320 count=40
Sent 20 238.413621 238.413621 9: seq: 12, identify offset=1360 count=40
Sent 21 238.414930 238.414930 9: seq: 13, identify offset=1400 count=40
Sent 22 238.416180 238.416180 9: seq: 14, identify offset=1440 count=40
Sent 23 238.417544 238.417544 9: seq: 15, identify offset=1480 count=40
Sent 24 238.418819 238.418819 9: seq: 16, identify offset=1520 count=40
Sent 25 238.420083 238.420083 9: seq: 17, identify offset=1560 count=40
Sent 26 238.421490 238.421490 9: seq: 18, identify offset=1600 count=40
Sent 27 238.422801 238.422801 9: seq: 19, identify offset=1640 count=40
Sent 28 238.424063 238.424063 9: seq: 1a, identify offset=1680 count=40
Sent 29 238.425371 238.425371 9: seq: 1b, identify offset=1720 count=40
Sent 30 238.426678 238.426678 9: seq: 1c, identify offset=1760 count=40
Sent 31 238.427940 238.427940 9: seq: 1d, identify offset=1800 count=40
Sent 32 238.429245 238.429245 9: seq: 1e, identify offset=1840 count=40
Sent 33 238.430558 238.430558 9: seq: 1f, identify offset=1880 count=40
Sent 34 238.431804 238.431804 9: seq: 10, identify offset=1920 count=40
Sent 35 238.433132 238.433132 9: seq: 11, identify offset=1960 count=40
Sent 36 238.434431 238.434431 9: seq: 12, identify offset=2000 count=40
Sent 37 238.435674 238.435674 9: seq: 13, identify offset=2040 count=40
Sent 38 238.436992 238.436992 9: seq: 14, identify offset=2080 count=40
Sent 39 238.438308 238.438308 9: seq: 15, identify offset=2120 count=40
Sent 40 238.439557 238.439557 9: seq: 16, identify offset=2160 count=40
Sent 41 238.440865 238.440865 9: seq: 17, identify offset=2200 count=40
Sent 42 238.442186 238.442186 9: seq: 18, identify offset=2240 count=40
Sent 43 238.443451 238.443451 9: seq: 19, identify offset=2280 count=40
Sent 44 238.444701 238.444701 9: seq: 1a, identify offset=2320 count=40
Sent 45 238.446090 238.446090 9: seq: 1b, identify offset=2360 count=40
Sent 46 238.447425 238.447425 9: seq: 1c, identify offset=2400 count=40
Sent 47 238.448676 238.448676 9: seq: 1d, identify offset=2440 count=40
Sent 48 238.449946 238.449946 9: seq: 1e, identify offset=2480 count=40
Sent 49 238.451205 238.451205 9: seq: 1f, identify offset=2520 count=40
Sent 50 238.452460 238.452460 9: seq: 10, identify offset=2560 count=40
Sent 51 238.453779 238.453779 9: seq: 11, identify offset=2600 count=40
Sent 52 238.455060 238.455060 9: seq: 12, identify offset=2640 count=40
Sent 53 238.456298 238.456298 9: seq: 13, identify offset=2680 count=40
Sent 54 238.457603 238.457603 9: seq: 14, identify offset=2720 count=40
Sent 55 238.458834 238.458834 9: seq: 15, identify offset=2760 count=40
Sent 56 238.460072 238.460072 9: seq: 16, identify offset=2800 count=40
Sent 57 238.461398 238.461398 9: seq: 17, identify offset=2840 count=40
Sent 58 238.462683 238.462683 9: seq: 18, identify offset=2862 count=40
Sent 59 238.479996 238.479996 6: seq: 19, get_uptime
Sent 60 238.533493 238.533493 6: seq: 1a, get_clock
Sent 61 238.585461 238.585461 6: seq: 1b, get_clock
Sent 62 238.637115 238.637115 6: seq: 1c, get_clock
Sent 63 238.688772 238.688772 6: seq: 1d, get_clock
Sent 64 238.741027 238.741027 6: seq: 1e, get_clock
Sent 65 238.792622 238.792622 6: seq: 1f, get_clock
Sent 66 238.844156 238.844156 6: seq: 10, get_clock
Sent 67 238.895817 238.895817 6: seq: 11, get_clock
Sent 68 238.898379 238.898379 6: seq: 12, get_config
Sent 69 238.899315 238.899315 6: seq: 13, get_clock
Sent 70 238.904409 238.904409 7: seq: 14, allocate_oids count=17
Sent 71 238.905049 238.905049 11: seq: 15, config_digital_out oid=10 pin=PA4 value=0 default_value=0 max_duration=0
Sent 72 238.905348 238.905348 10: seq: 16, set_digital_out_pwm_cycle oid=10 cycle_ticks=640000
Sent 73 238.905546 238.905546 12: seq: 17, config_stepper oid=0 step_pin=PC8 dir_pin=PC9 invert_step=0 step_pulse_ticks=128
Sent 74 238.905730 238.905730 11: seq: 18, config_digital_out oid=11 pin=PA15 value=1 default_value=1 max_duration=0
Sent 75 238.905858 238.905858 9: seq: 19, config_endstop oid=1 pin=PD3 pull_up=1
Sent 76 238.905967 238.905967 7: seq: 1a, config_trsync oid=2
Sent 77 238.906096 238.906096 12: seq: 1b, config_stepper oid=3 step_pin=PA10 dir_pin=PA14 invert_step=0 step_pulse_ticks=128
Sent 78 238.906265 238.906265 11: seq: 1c, config_digital_out oid=12 pin=PA13 value=1 default_value=1 max_duration=0
Sent 79 238.906396 238.906396 9: seq: 1d, config_endstop oid=4 pin=PD2 pull_up=1
Sent 80 238.906490 238.906490 7: seq: 1e, config_trsync oid=5
Sent 81 238.906642 238.906642 12: seq: 1f, config_stepper oid=6 step_pin=PC6 dir_pin=PC7 invert_step=0 step_pulse_ticks=128
Sent 82 238.906798 238.906798 11: seq: 10, config_digital_out oid=13 pin=PA9 value=1 default_value=1 max_duration=0
Sent 83 238.906918 238.906918 9: seq: 11, config_endstop oid=7 pin=PC3 pull_up=1
Sent 84 238.907009 238.907009 7: seq: 12, config_trsync oid=8
Sent 85 238.907113 238.907113 8: seq: 13, config_analog_in oid=14 pin=PA1
Sent 86 238.907272 238.907272 15: seq: 14, config_digital_out oid=15 pin=PC5 value=0 default_value=0 max_duration=320000000
Sent 87 238.907389 238.907389 11: seq: 15, set_digital_out_pwm_cycle oid=15 cycle_ticks=6400000
Sent 88 238.907532 238.907532 12: seq: 16, config_stepper oid=9 step_pin=PB12 dir_pin=PB11 invert_step=0 step_pulse_ticks=128
Sent 89 238.907702 238.907702 11: seq: 17, config_digital_out oid=16 pin=PA8 value=1 default_value=1 max_duration=0
Sent 90 238.907809 238.907809 11: seq: 18, finalize_config crc=2397358973
Sent 91 238.907971 238.907971 12: seq: 19, queue_digital_out oid=10 clock=167205859 on_ticks=0
Sent 92 238.908162 238.908162 24: seq: 1a, query_analog_in oid=14 clock=200960000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=5747 max_value=9575 range_check_count=4
Sent 93 238.908285 238.908285 12: seq: 1b, queue_digital_out oid=15 clock=167380090 on_ticks=0
Sent 94 238.908546 238.908546 6: seq: 1c, get_config
Sent 95 238.910881 238.910881 7: seq: 1d, stepper_get_position oid=0
Sent 96 238.912624 238.912624 7: seq: 1e, stepper_get_position oid=3
Sent 97 238.913939 238.913939 7: seq: 1f, stepper_get_position oid=6
Sent 98 238.915804 238.915804 7: seq: 10, stepper_get_position oid=9
Sent 99 239.883643 239.883643 6: seq: 11, get_clock
Dumping receive queue 94 messages
Receive: 0 238.368895 238.368576 48: seq: 11, identify_response offset=0 data=b'x\xda\xb5Y{o\xdb\xc8\x11\xff*[\x01A/\x8dl\x88\xa4\xa8\x87\x81\xfca;\xbe\xf6pu\xe2\xb3\x9c\xb6\xc0\xe1@\xd0\xe4JZ'
Receive: 1 238.370236 238.369890 48: seq: 12, identify_response offset=40 data=b'\x84\xafpI?z\xf0w\xef\xcc\xce\xbeH\xc9\xb9\xa0E\r\xc8\xda\xc7\xec\xee\xec<~3;\xfa}r\xdf\x8b"O\x1ex+E]'
Receive: 2 238.371516 238.371201 48: seq: 13, identify_response offset=80 data=b'\xc9\xc9\xd9d\x97eg\xec\x87 >[\x9d\x84\xb3`}\xf25:\t\xde\xdd\x07o\xd9\xea4:\r\x18\x8e\xcd\x96\xb3\x88\xfd\xd0\xf2\x82'
Receive: 3 238.372788 238.372476 49: seq: 14, identify_response offset=120 data=b'\xa7\x92\xbfe\xbf\xc2\x92\x93\xd5\xc9}\x9bV\xd9\x9e\xb5\xfcA\xe0^,\\F\xb3p\xf9\x1b\xbb\x17U\xdf\x89B\xc2\xae\xe1i\x14\x9f\x86'
Receive: 4 238.374111 238.373791 49: seq: 15, identify_response offset=160 data=b"'\xe1\xbb`\xfe\xee>|\xcb\xa8?\x99N\xb2\xba,\xd3*\x87\xf3\x7f\x9f\xa4EQgi\xc7\x93Z\xe4\x92eu_u\xef\xdfd\x93"
Receive: 5 238.375491 238.375093 49: seq: 16, identify_response offset=200 data=b'\xb3\xd5\x14\x98\xed:\xe02I\xb3/\x0cfa\xd8\x9b\x9f/=\x82<7\x04M-\xd5\x97\xa8\xde\xbf\xe9Y\xd3\x17E\xd27\xb4`\xed'
Receive: 6 238.376776 238.376465 49: seq: 17, identify_response offset=240 data=b'\x16|\xedy\xfbl\xf7\x04\x06\xbe u\xcbe\x97t"\xfb"\xa9\xd7\xc1\x15e)\xba\xc4\x9c\xcaD\x05\xa2\xd3\xe7\x03\x83\x19\x88\xa4M'
Receive: 7 238.378114 238.377768 49: seq: 18, identify_response offset=280 data=b'\xe4\xbe\xef\xf2\xfa\xb1\x9a\x9c\x85x\xb5j+v\xc0\xd1S\x11\xcdcs\x84lDB\xcd\xc9\xd92rTUZ\xd4\xbbDT\x96{\xc5'
Receive: 8 238.379490 238.379101 49: seq: 19, identify_response offset=320 data=b"\xf6\xe4,r;i\x96\r\x05u\x13'\x87xfI\xd5 o\x87\x9b\rd\x10/-q.v\xa2K\x8b\xa4\xee\xbb\xd1\x82\x87\xb4\xe8"
Receive: 9 238.380807 238.380461 49: seq: 1a, identify_response offset=360 data=b'9\xf6s\xbeM\xfb\xa2K\xec@\x99>%y\xdf\xa6\x1d(\\\xf1\x19\xb8\xfd8\xe8\xb3\xab\x9b\xc1^\xd9\xe0\xf0pa\x89\xf7\xf9|\xbe'
Receive: 10 238.382151 238.381818 49: seq: 1b, identify_response offset=400 data=b"\\\xcd\x0cq+\x13}67\x8d|n[\xb1m-lki[\xbcH\x9f\xad\xd2&g\x0b']\x11f\xcc\x08}\xee\x86\x0b!\xc3"
Receive: 11 238.383485 238.383124 49: seq: 1c, identify_response offset=440 data=b'\xfc\xf1\x98f\x16+KT6\xfd:\x8c-\x83\xb0\x95\xd3\xdf\xdaRU\xbcn\xc4\x13/F\x02\xcc\xd3.M\xa4\xf87\xc8l\xdf\x83C'
Receive: 12 238.384778 238.384471 49: seq: 1d, identify_response offset=480 data=b't\t\n\xce3,\xc9aHT\x1e\xdbql7m\x1e\xcb#J\xc9\x9e\xc1\xd8\xdc\x1eZ%\xfb~\xac$\x189\xd0\xd2\xdc\t\x1e\xae'
Receive: 13 238.386109 238.385773 49: seq: 1e, identify_response offset=520 data=b';\xde\x18\xfd\xab\x13\x0f<\xd9\x8b\xdd^\xdd0Z\xf9\xf4`\xa5\xbb\x82\x1f\xca\x8b\xd9\xb9\xa4{n8\xc9fp\x92\xf5\x8cc\x8b\xf5T'
Receive: 14 238.387488 238.387087 49: seq: 1f, identify_response offset=560 data=b'R\xca\xdd\xfb7\x7f\x01(\x88\xa2\xc1\xdaG\xd1\xedA\x0cI&\xad\x12#gm\xb2[\xaeC\xab\x9e\xcc\xda\x8f\xcc\x8a/\xb6-r\xdb'
Receive: 15 238.388778 238.388467 49: seq: 10, identify_response offset=600 data=b'|\xae\xb2dh*,+\xf3\xe4\xc0zf\xde\t\xbci\x9c3a7\xd1F\x9d\x8b\xd64\t\x10\x14\xb1\xa3\xea\x0b\xc9\xbdMCw\xb1'
Receive: 16 238.390111 238.389769 49: seq: 11, identify_response offset=640 data=b'n\xcf\xdb\xb2\x06?m\x8eJ\xd4\x9f\xf6\x84\xea\x98\xea\xca\xacO[k\x1b\xedSr\xe0\xe4\xac\xb3\x83hy\x9d(9Y\x98\x83\x94\xae'
Receive: 17 238.391490 238.391094 49: seq: 12, identify_response offset=680 data=b'Ey8\xb1\xc2\xfe9\xbf\xef\xc1\x9e\xebfr\xb66=\xd8e\xa7l\x99\xf4\x13X\xb2\x96\xa7\x80\xb7m\xce[<\x0f\xc0\xb7%0\x08'
Receive: 18 238.392776 238.392470 49: seq: 13, identify_response offset=720 data=b"\r\xc1c+:~@\x81FK\x84\xc1t\xc2K\xde\xeex\x95='\x88\x1a\xc0\x04\x0c\x11\x82$\xfb\xba\xe4\x07\xd8,\xd3\xb2\xf1\x1d@"
Receive: 19 238.394115 238.393782 49: seq: 14, identify_response offset=760 data=b'\xf7-2\x0f\xb1\x1bXw\xa8E\xd7\xb52n\xc5n\xc7[\xbc\x84D\xff@`\x8a\xdd\xe1*2\x00Oi\xc7\xad\x80\xc2\xf9t\xb2\x15'
Receive: 20 238.395487 238.395103 49: seq: 15, identify_response offset=800 data=b'\x80\xd5\xe0\xd2\t\xc9\x90emF\x163\x9d\xec\xc0\x9b\x15\x9f d\xddS4\xa09\xea\xf6\rj\x01\xfcp:\xd1\xc0\x97H8/\x01'
Receive: 21 238.396777 238.396458 49: seq: 16, identify_response offset=840 data=b'\x0b\xb4\xb8\x8em\x92\xf3"\x1c\x91\xa1\n\x0c\x99S\xc7\x02\x84\x88\xb0T\xd6\xb9\xd8>\'\xa0k\xbbW\xcb\x95K1\x1d\x9e\x80\x03\x9c\xd5'
Receive: 22 238.398114 238.397774 49: seq: 17, identify_response offset=880 data=b'^\xb6\xa6e\xa4\xc3!=\x8e%\x05\xd7\xa01#B\xb5\xbc\x97>\x12BW\xe1\x18\xc8\x08\xbfQ\xbd\\\x92\xad\xcfC\xb7J\xd6\xdb\xee'
Receive: 23 238.399489 238.399091 49: seq: 18, identify_response offset=920 data=b'1m\xb9\xbf\x1c\xfc\xd3\xfad\x9e\x9a\xe6\xb1\x9d\x161\xed\xa4mi|\xfd9^?\xe7U\x07\x97g\xf5v\x0b\x07*\xa7\xb6q\x11\xe6'
Receive: 24 238.400775 238.400469 49: seq: 19, identify_response offset=960 data=b'\r<+1Zm\xc6\x917\xd37\xb9\xd34%\x0f\xfb\xde;&\x06\x9d\x91I\x8c"\xfa\xf1\xa4\x01T\x1e\x8e\x16([\xea\x1d\x88-'
Receive: 25 238.402114 238.401768 49: seq: 1a, identify_response offset=1000 data=b"\x03K0\x8e\xfe\xff\xa5\xb1\x97\xce\xd85\xfa\xbb\x1ed0;X\xb8\xe7\xd9\x17/g\x88,\x0f\xa3\x94\xc1r\xd0\xd4\x80'\xe3\xf3\xbdp"
Receive: 26 238.403487 238.403091 49: seq: 1b, identify_response offset=1040 data=b"\xb50\x1b\x0c\xa3\xe9kRY,\x87\xf4c\xa1,\xec~\xa3\xc0\xfb\xaa\x98W\xa3\x05\x07b\xb6'\x1e\x84\xb0W\xf2=\xf4Q\x88Xb"
Receive: 27 238.404828 238.404463 49: seq: 1c, identify_response offset=1080 data=b'K2Z\xc6f\x83c\xa0\xfd\xca\x1e\x9e*\x06\x9a\xa0\x0e\x04\x0b\xc0\x90\xdcS\xc4b\xad\x0e\xe9\xf9\xb1t\xcc\x9eQ\xfb\x99B\x10\x9b%'
Receive: 28 238.406231 238.405917 49: seq: 1d, identify_response offset=1120 data=b'\xa3D\xc1\x92[\xed\x83\x97Xb\x8cL\xd6\x87Q\xe5\x04\xc6\xc6a\xf6\xca\xf9\xe0[\x00\xdc\x81\t\xab\x1c\x05\x92\xf0\x99n\xaa\xf5\x84r'
Receive: 29 238.407507 238.407209 49: seq: 1e, identify_response offset=1160 data=b'\xe3\xf3`\x01P!\x8d\x7f\x87Q.\t|G\x07D\xea\x06*\xb1\xb1{\x0e\xb2\x1cX\xb4\xa0E\x15\x7f\xd2,@\xec\xb5` Z\x82'
Receive: 30 238.408788 238.408465 49: seq: 1f, identify_response offset=1200 data=b'\xe7\x80\x88\x8c<\xfe c\x02\xa9\x80S{\xc9\x0bf\xf9[\xe7\x03\xce\xf9\x97\x9a\xce\x83\x0fo6\xb2\xb3\x03\x80\xc4!\r\x90\x00\xcd\xdc'
Receive: 31 238.410105 238.409759 49: seq: 10, identify_response offset=1240 data=b'\x837X\xb2pK\x8e\xa1c)dm0\xb1\xac\xa58\x96\xd5\x1cl\xba\xd0|\xbc~\x8f\x08\xac\x80\x12\xa6o\xc5\x9dx=\xa4:\x1e'
Receive: 32 238.411357 238.411047 49: seq: 11, identify_response offset=1280 data=b'v\xe2\x15R\xa9\xd4(\xc1\xd8\x06\x90)0\xd1\xb4\x8e\x17\xac\x1d\x81\x8a\xa8h\xbd\x14s\x99\r\xc1^@\x86\x15\xb0\xa5Nl\x06\xa2V'
Receive: 33 238.412605 238.412310 49: seq: 12, identify_response offset=1320 data=b'\xc8o\x03\x13a7\xa8Z\xafF\x19\xa2\xcb\x1e\xf1\x000\x89\x95\xa3\xeb\xfc\x84\x897u\xab\xa35y\xaf\xea[#\xe1O\x8d\x00\x95\xf8'
Receive: 34 238.413985 238.413621 49: seq: 13, identify_response offset=1360 data=b'\xb9\xc1\xda\xee4\xba\x85O\x04`C\x91\xe4\x98\x1f{>0\x7f1I\x18>}\xcf?\\&\xd7\xe7\xff\xc2X\xbb\x06\x15]|\xde$'
Receive: 35 238.415231 238.414930 49: seq: 14, identify_response offset=1400 data=b'7?}\xdc\xe0\xc3%Hn\xce\xd7\xf0\tf\xf0F\x87\xe6T5\x0fh.\x16\xf0Y"\xc9\xc5b\x8a\xadC\x8a\x15|\xd6\x8ab5'
Receive: 36 238.416507 238.416180 49: seq: 15, identify_response offset=1440 data=b'\xc5\xd6\x90"\x84\xd9`\x86\xff\x02E\x03I\x9ej\x1f\xa1\x8a\xf0\xdf\x9c\xa8\xa2\xa9j\x0f\xa9\x90\x00?D\x83$\x03\n\xb0Qu\xc69'
Receive: 37 238.417859 238.417544 49: seq: 16, identify_response offset=1480 data=b'pz\xbe\x84O<\x9eM\xd5\xc29,\x8c\xe1\x13\x8d\xa6C:\x1a\xa7\x03\x9c\x0f\x0e\x08\xd4\xfa\xcbpzs\xa9\xf8\x9b\x8d\xe6\xa3\x83\xed'
Receive: 38 238.419133 238.418819 49: seq: 17, identify_response offset=1520 data=b'/\xff\xfe\xe9\xf2\xe7\xe4\xc7\xdb\xab_\xd0\x8df\xeao:\xb9\xbe\xfc\x0c\x94\xb2+\xa3p7\xbb\x0f\x9e\x9e\x80\xf2\xe6\x9f\xd7\xa4\xaa\x10_'
Receive: 39 238.420479 238.420083 49: seq: 18, identify_response offset=1560 data=b'j\xb7W\x9b\xab\xdb\x7f\\\xd1\xce\x9f7\x17\xeaZ\x90\xd5\xc2?,ol\xee\xce\xef6\xc9\xe6\xf3\xf5\xe6\x97\xe4\xe2|s\x85\xab\x168'
Receive: 40 238.421857 238.421490 49: seq: 19, identify_response offset=1600 data=b'|ussu\x9b\\|\xba\xfb[r\xf5\xe1\xaf0\x1e\xbc`\xe6\xd9C.\xac^k\xaa \xa23,\xdd\xf4\r\x81r+O\xed3'
Receive: 41 238.423105 238.422801 49: seq: 1a, identify_response offset=1640 data=b';\xa0\xb5L9\xe1@\xa9\x91\x1b2\x1a\x9c\xab!O]1\xb0\x01\xf0bl\xf2\xee\xea\x1a\xf8<\xbf\xfb|\xabX\x07\xf2\x9bs8\xfe'
Receive: 42 238.424357 238.424063 49: seq: 1b, identify_response offset=1680 data=b'\xd7\xd94X\xfc\x06\x9d\x0b\xec\x004S\xef\x12{Q\xa8{\x1f\xb07_\xe9\xde\x15\xf6\x00\xa0\xa8\xf7#\xf6Vj\x97\x97\x01\x02\xc3K'
Receive: 43 238.425733 238.425371 49: seq: 1c, identify_response offset=1720 data=b'G\x95\x82\x82(\x8a\xd4\xadR\x19\xcf\xe6\xcb\\]\xa8+x<\x0b\xc2{`E\xaf\xd2\xd2!\x83\n\xd4\x18\xdaN\xa8Z\xa1\xda@\x9b'
Receive: 44 238.426981 238.426678 49: seq: 1d, identify_response offset=1760 data=b'C\xa4Z\xb0\':\x1ef\x08\x02\x01\xa1\x85\x87M"r}]\xa6\\uK\xa9\x12U)\xce\x0bD\x9cgf\x92\xfe\x9c\xc2\xd7eZ'
Receive: 45 238.428232 238.427940 49: seq: 1e, identify_response offset=1800 data=b"\xb1\xaa\xee\x18@\x0fC\xf8f\x10q(\xcc0\x85 \xecq/\xa0MH Y\x03X\x06'Q|\x84\xb5\x7f\xee0\xc6\xc2\xb3t\x07"
Receive: 46 238.429609 238.429245 49: seq: 1f, identify_response offset=1840 data=b'\xbb\xc2[/\xed\x98\x90,\xd5g\xd1#\x9c\x1e#\x9aX")\xa2\x08=\x99hT\x85c\x95\xac\xc0q\xbcb\xe6\x9dj\xd7\x83\x18.'
Receive: 47 238.430857 238.430558 49: seq: 10, identify_response offset=1880 data=b'\xa9\xbe\xc6\x9a\xb4\x950\xc5\xdb\xb6n\xd5k\xc4L\xb4\x1c\xb2\x02\xd9\xa9*\xdbO\x94\x9500q\x96\xed\xd3\xaa\xe2\x05\x15\xcb\xcc\x84\xa9'
Receive: 48 238.432103 238.431804 49: seq: 11, identify_response offset=1920 data=b'@\xb9\x82\x18e\r\x94G\x1a*]\xd3So 7\x06d\xc8EZrH9\xe8)l&\xcb\xfa\x81\x1bF\x18VK\x10\x1f\xdd\xb4'
Receive: 49 238.433481 238.433132 49: seq: 12, identify_response offset=1960 data=b'\xad\xad\xd8j\n\xc5\xcf\x83y\x9d\xc2\xdb\xf3#\x8f\x01\x90\x1d#\xeb\xc2\xc7\xa9\x19\xc5"\x88\xb2\xa1\xf9j8h\xa0\x19\xf1\xdc\x1b\xd7\xe9'
Receive: 50 238.434729 238.434431 49: seq: 13, identify_response offset=2000 data=b'c\xb6\x17\x8d\xdem\xee]|\x90\x1ez4\xf8\xd2\xbaN\x9f\xd0\xb4VF\x86T\xe5\xb8\x867N\xba\xe3\x0c\x9e\xbf\x10\xcc\x8dz\xe0n'
Receive: 51 238.435981 238.435674 49: seq: 14, identify_response offset=2040 data=b'\xd7BJ\x0eGB\xbe\x9e\xf7\x05>\xbfa1\xe6>L\x87\x15e\xab\xfc\x81\xa3\xf01\xedy}\xc1>mse\x9f\x9a\x1a\x1f\xf9\xd7'
Receive: 52 238.437355 238.436992 49: seq: 15, identify_response offset=2080 data=b'(q\x95\x0e2h\xb5\xdb\xa2~\xa4|\xf2#\x18u\xca\xe8:\xe8\x11\n\x0b\xe6\xa3\t\xb4\x0f5\x81A\xd8\x9f\x10UCY\x17=\xff'
Receive: 53 238.438608 238.438308 49: seq: 16, identify_response offset=2120 data=b'\xd4T\x85\x9c\xba\xe1H!\xa8\xb5\xf5\xa6\xadw`\x13%\xb0\x9e\xe2\xdd\xb6\x90\xb6\x00\x97 k\x8e\xbe\x86%\xcd[\xae/\x054h\xec'
Receive: 54 238.439856 238.439557 49: seq: 17, identify_response offset=2160 data=b'-\x1c\x83\xa2\x06kB\xbb\xc5\x14nc\t\x0e\xa4\xc3\x1eEQ@4\xcf`\xbfA=\x8c\xf2\x13\xb7\xd2J\xe8\x1b+0\x05\xd8\x80\xcf'
Receive: 55 238.441231 238.440865 49: seq: 18, identify_response offset=2200 data=b'\x91\x0e\x15\x03H!\xca\xbe4c\xc6\x1f\xe0\xfa\x1bS\xf3R\xafo\xd8Ly\xa9\x82\r\xbfN\xbc\xd1n\xdb\xd55\xdb\xa6\xeavt3'
Receive: 56 238.442502 238.442186 49: seq: 19, identify_response offset=2240 data=b',6\xdc\xf9&\x85"\x03BU\xe5\xa3\xda\xdc\x9d\x92\x07\xae\x84DFr\x05s\x9f+\xd97\x98\xcc\xc0\x89X\xf8$\xfb\x06;V\xf5'
Receive: 57 238.443756 238.443451 49: seq: 1a, identify_response offset=2280 data=b'ux\x01\xf6\xd5\x17\xd8\x03\xf0)\xa7\xb2\xad7.\xdd\x04\x18!\x19;$b\xb2n\x95\x7fBF$Y&\xb5*]1\x8a\x90\xa8\xae'
Receive: 58 238.445107 238.444701 49: seq: 1b, identify_response offset=2320 data=b'\n\x00\xaf\x07\xd8 \xbd/\x0c&\xd9\x9bR\xb5\x81\xe9D\x8dJ\x91\xa3\xaa\xc5\x19\xfb\x04\xa8\x08A\xf0\x1es\xab-V\xad\xe4\x9f(\x85'
Receive: 59 238.446479 238.446090 49: seq: 1c, identify_response offset=2360 data=b'S?\tX\x80\xd4?\x14\xe4T\x8a\x92\xf8\xf6\x07\xac\xd2\xd6\x91\xc14Na2\x0c\xd0\xac\x8a\xbf\x1f\xcf/\x7f\xa6\xaa\xa1\xa9\x9b\xa9\x9c'
Receive: 60 238.447730 238.447425 49: seq: 1d, identify_response offset=2400 data=b'\x16\x05W\xa4-\x82=\xe6\xf0G\x127\xd4\x16\xd96V!5\xb4\x92\xe7`\xba\n\xb1\xe4\xa0R\x87\xc1\x04\x12\x84(X\xc5\xb1\x8a@'
Receive: 61 238.448982 238.448676 49: seq: 1e, identify_response offset=2440 data=b'\xba\xb3P\x11\x8a:\x8bX\xa9\x1e:\x8b\xc5\x12\xda\xd1\xcb\x8bz^5\x80\x0c\x9c~\x0c\xd15\x03?\xf7\x96\x08\x91U\xc6G\x95\x89\x13'
Receive: 62 238.450254 238.449946 49: seq: 1f, identify_response offset=2480 data=b'4\x94\xa35\x06\xf7\x12\xd4\xefW\x93\xdd\xd2+\xca\xdf\xee\xbeW\xae\xa7Vm\xc5\xb6\xc6\xefBx?y\xe0s\xe9\x04C\x92-V\x0c'
Receive: 63 238.451513 238.451205 49: seq: 10, identify_response offset=2520 data=b'jc\xb4\xe5\xb1\x97\xe7:r\xbf\xb6\x0cV\xa4^%\x82\xa9\x19}\x1f\xf5\x9b\x87z`\xba<~e\xeb\xc9\x10*uYM\xddPU'
Receive: 64 238.452799 238.452460 49: seq: 11, identify_response offset=2560 data=b'\xdfp\xcc\x98\x9az>\x01\xaa\xf9\x8c\xafT\xbdX\x158\xbe\xc5\xb5^\xa1\x1b\x89;\xfd$\\\xbb\x92\xa7\x04\xf7\xb3\x15\xcc\xd5\xdaU\x0c'
Receive: 65 238.454107 238.453779 49: seq: 12, identify_response offset=2600 data=b'\x07;\xef\xeb\x12P\xf8\xf0\x0c\xbf \t\xc2\t\\\x11.1\x06\xe0\xde\x15\xd4\'\xb1\xe0\xc3\xc0\xd4\xb9<R[\xf0"\x838ER\xcc'
Receive: 66 238.455357 238.455060 49: seq: 13, identify_response offset=2640 data=b'\x06\x9d@\xd88\xdd\xd12\x01)\xeb\x1a\xccw\x19\xd9\xd2\x92\xff\x9fm\x0c\xdc\xdd\x94r\xbe\x871\x84\xf1\xa3\xa5\x9f\xff\x89\xb3\xfe\x18g'
Receive: 67 238.456605 238.456298 49: seq: 14, identify_response offset=2680 data=b'3\xaf^\xa8\xed\xc00\xd7g\x99\xaaWfh\xbf@\x07\xda\xf1K\xe6+|,\xbbx`\xaa{\xc7\x15\x13\xf9)\xf1w\xe9&\xf0W'
Receive: 68 238.457882 238.457603 49: seq: 15, identify_response offset=2720 data=b'x\x0fg\x7f\x01\xd2\x85\xc7\xca\x1d\x07v\xe7\x97\xb4<\x03<\t\xa3a}\xe1\x8f\x0cv\xae2\xed\xb6S\xa9\xef*\xa0\xbc[:/\x93'
Receive: 69 238.459130 238.458834 49: seq: 16, identify_response offset=2760 data=b'}\xa9\xbf\xe4Wr\xa6\xb9\xab\x18\x8c\xca\tT\x91\x15\xb0\xebl\x84\xb9CE\x1c\x85\xa1\x9eb&i\x07\xd3zSd8\xbc\x00\x96\x17'
Receive: 70 238.460382 238.460072 49: seq: 17, identify_response offset=2800 data=b'\x08\x84\x02\xbfp\xe0\xfc:Km\x15\xe3\xe8\x8f\x08\x1ef\xadC\x8c)*A\xa7_\xd4z\x1f\xd0\xf0\xa9\xa5\x7f~\x87W\xe3\xc3\xec4'
Receive: 71 238.461728 238.461398 31: seq: 18, identify_response offset=2840 data=b'\x08Ng\xe0f\xc1\xc9.\xde\xae\xd7\xb3\xed:\x9a\xbc\xfc\x07\x1e\x12z\x02'
Receive: 72 238.462981 238.462683 9: seq: 19, identify_response offset=2862 data=b''
Receive: 73 238.480331 238.479996 11: seq: 1a, uptime high=0 clock=127575288
Receive: 74 238.533816 238.533493 10: seq: 1b, clock clock=130995362
Receive: 75 238.585780 238.585461 10: seq: 1c, clock clock=134317950
Receive: 76 238.637477 238.637115 10: seq: 1d, clock clock=137620355
Receive: 77 238.689106 238.688772 10: seq: 1e, clock clock=140923151
Receive: 78 238.741353 238.741027 10: seq: 1f, clock clock=144263834
Receive: 79 238.792902 238.792622 10: seq: 10, clock clock=147562810
Receive: 80 238.844469 238.844156 10: seq: 11, clock clock=150857607
Receive: 81 238.896136 238.895817 10: seq: 12, clock clock=154160935
Receive: 82 238.898673 238.898379 10: seq: 13, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 83 238.899673 238.899315 10: seq: 14, clock clock=154384064
Receive: 84 238.908722 238.908546 15: seq: 1d, config is_config=1 crc=2397358973 is_shutdown=0 move_count=1024
Receive: 85 238.911167 238.910881 8: seq: 1e, stepper_position oid=0 pos=0
Receive: 86 238.912989 238.912624 8: seq: 1f, stepper_position oid=3 pos=0
Receive: 87 238.914265 238.913939 8: seq: 10, stepper_position oid=6 pos=0
Receive: 88 238.916128 238.915804 8: seq: 11, stepper_position oid=9 pos=0
Receive: 89 239.635169 238.915804 14: seq: 11, analog_in_state oid=14 next_clock=220160000 value=1576
Receive: 90 239.883980 239.883643 11: seq: 12, clock clock=217325290
Receive: 91 239.935416 239.883643 14: seq: 12, analog_in_state oid=14 next_clock=239360000 value=1577
Receive: 92 240.235695 239.883643 14: seq: 12, analog_in_state oid=14 next_clock=258560000 value=1576
Receive: 93 240.536232 239.883643 12: seq: 12, shutdown clock=259013343 static_string_id=ADC out of range
Transition to shutdown state: MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Dumping gcode input 0 blocks
Dumping 20 requests for client 281472970479504
Received 239.248783: b'{"id": 281473646871312, "method": "objects/list", "params": {}}'
Received 239.252198: b'{"id": 281473647281440, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 239.501658: b'{"id": 281473647353712, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 239.505726: b'{"id": 281473647353712, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 239.509293: b'{"id": 281473647353712, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 239.512890: b'{"id": 281473647353712, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 239.521610: b'{"id": 281473646872272, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 239.522421: b'{"id": 281473646873424, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 239.565253: b'{"id": 281473646873808, "method": "info", "params": {}}'
Received 239.566378: b'{"id": 281473646874192, "method": "objects/list", "params": {}}'
Received 239.566378: b'{"id": 281473675636304, "method": "gcode/help", "params": {}}'
Received 239.594564: b'{"id": 281473675635248, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "configfile": null, "mcu": null, "gcode_move": null, "print_stats": null, "virtual_sdcard": null, "pause_resume": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "fan": null, "stepper_enable": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "heaters": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 239.758315: b'{"id": 281473647353664, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "extruder": null, "configfile": null, "mcu": null, "gcode_move": null, "virtual_sdcard": null, "pause_resume": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "fan": null, "stepper_enable": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "heaters": null}, "response_template": {"method": "process_status_update"}}}'
Received 240.009330: b'{"id": 281473675635104, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "extruder": null, "configfile": null, "mcu": null, "gcode_move": null, "virtual_sdcard": null, "pause_resume": null, "display_status": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "fan": null, "stepper_enable": null, "motion_report": null, "query_endstops": null, "idle_timeout": null, "system_stats": null, "manual_probe": null, "toolhead": null, "heaters": null}, "response_template": {"method": "process_status_update"}}}'
Received 240.070742: b'{"id": 281473646871888, "method": "objects/query", "params": {"objects": {"extruder": ["can_extrude"]}}}'
Received 240.101201: b'{"id": 281473698799328, "method": "info", "params": {}}'
Received 240.126438: b'{"id": 281473698799472, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 240.296186: b'{"id": 281473698790464, "method": "gcode/help", "params": {}}'
Received 240.314333: b'{"id": 281473698790464, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": null, "display_status": null, "fan": null, "gcode_move": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": null, "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": null, "extruder": null, "mcu": null, "gcode_macro CANCEL_PRINT": null, "gcode_macro PAUSE": null, "gcode_macro RESUME": null, "gcode_macro SET_PAUSE_NEXT_LAYER": null, "gcode_macro SET_PAUSE_AT_LAYER": null, "gcode_macro SET_PRINT_STATS_INFO": null, "gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL": null, "gcode_macro _CLIENT_EXTRUDE": null, "gcode_macro _CLIENT_RETRACT": null, "stepper_enable": null, "query_endstops": null, "system_stats": null, "heaters": null}, "response_template": {"method": "process_status_update"}}}'
Received 240.331493: b'{"id": 281473675634960, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "manual_probe": null}}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (240.000432197, 0.0, 0.0)
Stats 240.9: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1035 bytes_read=4344 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940117  sysload=0.24 cputime=6.491 memavail=720100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 241.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1041 bytes_read=4417 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939890  sysload=0.24 cputime=6.506 memavail=720100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 242.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1047 bytes_read=4475 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941108  sysload=0.24 cputime=6.519 memavail=720156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 243.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1053 bytes_read=4547 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942327  sysload=0.24 cputime=6.532 memavail=720156 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 244.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1059 bytes_read=4605 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943333  sysload=0.24 cputime=6.548 memavail=720368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 245.9: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1065 bytes_read=4663 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944248  sysload=0.22 cputime=6.561 memavail=720444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 246.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1071 bytes_read=4749 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944799  sysload=0.22 cputime=6.577 memavail=720444 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 247.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1077 bytes_read=4807 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63945024  sysload=0.22 cputime=6.590 memavail=720696 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 248.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1083 bytes_read=4865 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63945010  sysload=0.22 cputime=6.604 memavail=720948 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 249.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1089 bytes_read=4937 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944932  sysload=0.22 cputime=6.618 memavail=720952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 250.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1095 bytes_read=4995 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944897  sysload=0.21 cputime=6.632 memavail=720708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 251.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1101 bytes_read=5067 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944873  sysload=0.21 cputime=6.646 memavail=720960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 252.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1107 bytes_read=5139 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944819  sysload=0.21 cputime=6.661 memavail=720708 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 253.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1113 bytes_read=5197 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944711  sysload=0.21 cputime=6.675 memavail=720960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 254.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1119 bytes_read=5255 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944567  sysload=0.21 cputime=6.689 memavail=720960 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 255.9: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1125 bytes_read=5327 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944491  sysload=0.19 cputime=6.703 memavail=720468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 256.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1131 bytes_read=5399 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944542  sysload=0.19 cputime=6.718 memavail=720720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 257.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1137 bytes_read=5457 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944577  sysload=0.19 cputime=6.731 memavail=720720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 258.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1143 bytes_read=5529 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944623  sysload=0.19 cputime=6.746 memavail=721224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 259.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1149 bytes_read=5587 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944652  sysload=0.19 cputime=6.759 memavail=720972 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 281472970479504: Disconnected
Restarting printer
Start printer at Fri Sep  8 05:33:06 2023 (1694151186.5 261.8)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0%}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if printer.idle_timeout.state|upper == "IDLE" %}
	{% if last_extruder_temp.restore %} M109 S{last_extruder_temp.temp} {% endif %}
	{% endif %}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Extruder not hot enough'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[stepper_x]
step_pin = PC8
dir_pin = !PC9
enable_pin = !PA15
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD3
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_y]
step_pin = PA10
dir_pin = !PA14
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD2
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PA9
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC3
position_endstop = 0.0
position_max = 200

[extruder]
step_pin = PB12
dir_pin = !PB11
enable_pin = !PA8
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC5
sensor_type = PT1000
sensor_pin = PA1
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = -270
max_temp = 300

[fan]
pin = PA4

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3A0059000C504B5735313920-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PD5, EXP1_3=PB3, EXP1_5=PB5, EXP1_7=PB7, EXP1_9=<GND>,
	EXP1_2=PD4,  EXP1_4=PD6, EXP1_6=PB4, EXP1_8=PB6, EXP1_10=<5V>,
	
	EXP2_1=PB14, EXP2_3=PB8, EXP2_5=PC10, EXP2_7=PC12,  EXP2_9=<GND>,
	EXP2_2=PB13, EXP2_4=PB9, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281472977512144: New connection
webhooks client 281472977512144: Client info {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
Loaded MCU 'mcu' 112 commands (v0.11.0-271-g5f990f93 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for extruder
Stats 263.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1022 bytes_read=4244 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943771  sysload=0.17 cputime=7.599 memavail=720400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281472977512144
webhooks: registering remote method 'reboot_machine' for connection id: 281472977512144
webhooks: registering remote method 'pause_job_queue' for connection id: 281472977512144
webhooks: registering remote method 'start_job_queue' for connection id: 281472977512144
Stats 264.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1028 bytes_read=4274 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940720  sysload=0.17 cputime=7.634 memavail=720400 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 265.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1034 bytes_read=4346 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941501  sysload=0.17 cputime=7.664 memavail=720184 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 266.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1040 bytes_read=4419 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943122  sysload=0.24 cputime=7.680 memavail=719976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 267.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1046 bytes_read=4477 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63945246  sysload=0.24 cputime=7.694 memavail=720484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 268.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1052 bytes_read=4549 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63946721  sysload=0.24 cputime=7.708 memavail=719984 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 269.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1058 bytes_read=4607 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63947751  sysload=0.24 cputime=7.721 memavail=720236 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 270.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1064 bytes_read=4665 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63948342  sysload=0.24 cputime=7.735 memavail=719732 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 271.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1070 bytes_read=4751 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63948794  sysload=0.22 cputime=7.750 memavail=719992 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 272.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1076 bytes_read=4809 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63948961  sysload=0.22 cputime=7.764 memavail=719744 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 273.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1082 bytes_read=4867 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63948851  sysload=0.22 cputime=7.777 memavail=719996 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 274.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1088 bytes_read=4939 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63948518  sysload=0.22 cputime=7.792 memavail=720000 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 275.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1094 bytes_read=4997 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63948008  sysload=0.22 cputime=7.805 memavail=719752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 276.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1100 bytes_read=5069 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63947615  sysload=0.20 cputime=7.819 memavail=719008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 277.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1106 bytes_read=5141 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63947374  sysload=0.20 cputime=7.833 memavail=719280 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 278.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1112 bytes_read=5199 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63947116  sysload=0.20 cputime=7.846 memavail=719544 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 279.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1118 bytes_read=5257 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63946827  sysload=0.20 cputime=7.859 memavail=719796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 280.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1124 bytes_read=5329 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63946482  sysload=0.20 cputime=7.873 memavail=719796 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 281.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1130 bytes_read=5401 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63946102  sysload=0.19 cputime=7.887 memavail=720056 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 282.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1136 bytes_read=5459 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63945713  sysload=0.19 cputime=7.900 memavail=720060 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 283.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1142 bytes_read=5531 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63945348  sysload=0.19 cputime=7.914 memavail=720976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 284.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1148 bytes_read=5589 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63945032  sysload=0.19 cputime=7.927 memavail=720672 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 285.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1154 bytes_read=5647 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944735  sysload=0.19 cputime=7.940 memavail=720976 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 286.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1160 bytes_read=5733 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944484  sysload=0.17 cputime=7.955 memavail=720484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 287.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1166 bytes_read=5791 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944256  sysload=0.17 cputime=7.969 memavail=720484 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 288.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1172 bytes_read=5849 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944042  sysload=0.17 cputime=7.982 memavail=721188 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 289.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1178 bytes_read=5921 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943842  sysload=0.17 cputime=7.996 memavail=721492 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 290.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1184 bytes_read=5979 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943718  sysload=0.17 cputime=8.009 memavail=721440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 291.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1190 bytes_read=6051 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943623  sysload=0.16 cputime=8.022 memavail=721640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 292.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1196 bytes_read=6123 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943566  sysload=0.16 cputime=8.036 memavail=722004 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 293.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1202 bytes_read=6181 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943517  sysload=0.16 cputime=8.050 memavail=722208 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 294.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1208 bytes_read=6239 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943465  sysload=0.16 cputime=8.063 memavail=722008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 295.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1214 bytes_read=6311 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943418  sysload=0.16 cputime=8.077 memavail=722008 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 296.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1220 bytes_read=6383 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943390  sysload=0.14 cputime=8.090 memavail=722260 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 297.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1226 bytes_read=6441 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943389  sysload=0.14 cputime=8.104 memavail=722268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 298.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1232 bytes_read=6513 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943371  sysload=0.14 cputime=8.117 memavail=722268 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 299.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1238 bytes_read=6571 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943331  sysload=0.14 cputime=8.130 memavail=722520 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 300.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=1244 bytes_read=6629 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943262  sysload=0.14 cputime=8.148 memavail=722772 print_time=39.884 buffer_time=0.479 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 281472977512144: Disconnected
Restarting printer
Start printer at Fri Sep  8 05:33:46 2023 (1694151226.5 301.8)
===== Config file =====
[virtual_sdcard]
path = ~/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
variable_restore_idle_timeout = 0
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0%}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=PAUSE VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	
	
	{% if printer['gcode_macro PAUSE'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro PAUSE'].restore_idle_timeout}
	{% endif %}
	{% if printer.idle_timeout.state|upper == "IDLE" %}
	{% if last_extruder_temp.restore %} M109 S{last_extruder_temp.temp} {% endif %}
	{% endif %}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Extruder not hot enough'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[stepper_x]
step_pin = PC8
dir_pin = !PC9
enable_pin = !PA15
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD3
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_y]
step_pin = PA10
dir_pin = !PA14
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PD2
position_endstop = 0
position_max = 200
homing_speed = 50

[stepper_z]
step_pin = PC6
dir_pin = PC7
enable_pin = !PA9
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC3
position_endstop = 0.0
position_max = 200

[extruder]
step_pin = PB12
dir_pin = !PB11
enable_pin = !PA8
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC5
sensor_type = PT1000
sensor_pin = PA1
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = -270
max_temp = 300

[fan]
pin = PA4

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_3A0059000C504B5735313920-if00

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[tmc2130 stepper_x]
cs_pin = PD9
spi_bus = spi2
run_current = 0.800
stealthchop_threshold = 999999
diag1_pin = PD3

[board_pins]
aliases = 
	
	EXP1_1=PD5, EXP1_3=PB3, EXP1_5=PB5, EXP1_7=PB7, EXP1_9=<GND>,
	EXP1_2=PD4,  EXP1_4=PD6, EXP1_6=PB4, EXP1_8=PB6, EXP1_10=<5V>,
	
	EXP2_1=PB14, EXP2_3=PB8, EXP2_5=PC10, EXP2_7=PC12,  EXP2_9=<GND>,
	EXP2_2=PB13, EXP2_4=PB9, EXP2_6=PB15, EXP2_8=<RST>, EXP2_10=<NC>
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281472970229936: New connection
webhooks client 281472970229936: Client info {'program': 'Moonraker', 'version': 'v0.8.0-138-gfe12095'}
Loaded MCU 'mcu' 112 commands (v0.11.0-271-g5f990f93 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
TMC stepper_x failed to init: Unable to write tmc spi 'stepper_x' register CHOPCONF
Starting heater checks for extruder
Stats 303.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1195 bytes_read=4387 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63957521  sysload=0.13 cputime=9.006 memavail=722584 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281472970229936
webhooks: registering remote method 'reboot_machine' for connection id: 281472970229936
webhooks: registering remote method 'pause_job_queue' for connection id: 281472970229936
webhooks: registering remote method 'start_job_queue' for connection id: 281472970229936
Stats 304.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1201 bytes_read=4417 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63958231  sysload=0.13 cputime=9.046 memavail=722336 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 305.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1207 bytes_read=4489 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63958418  sysload=0.13 cputime=9.080 memavail=722100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 306.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000027 bytes_write=1213 bytes_read=4562 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63956902  sysload=0.28 cputime=9.094 memavail=722100 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 307.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000027 bytes_write=1219 bytes_read=4620 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63954450  sysload=0.28 cputime=9.110 memavail=721604 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 308.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000027 bytes_write=1225 bytes_read=4692 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63951399  sysload=0.28 cputime=9.125 memavail=721368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 309.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000027 bytes_write=1231 bytes_read=4750 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63949086  sysload=0.28 cputime=9.139 memavail=721368 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 310.2: gcodein=0  mcu: mcu_awake=0.011 mcu_task_avg=0.000020 mcu_task_stddev=0.000027 bytes_write=1237 bytes_read=4808 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63947497  sysload=0.28 cputime=9.153 memavail=721136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 311.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1243 bytes_read=4894 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63946213  sysload=0.26 cputime=9.167 memavail=721136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 312.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1249 bytes_read=4952 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63944922  sysload=0.26 cputime=9.182 memavail=720892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 313.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1255 bytes_read=5010 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63943810  sysload=0.26 cputime=9.196 memavail=721428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 314.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1261 bytes_read=5082 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942970  sysload=0.26 cputime=9.211 memavail=721428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 315.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1267 bytes_read=5140 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63942261  sysload=0.26 cputime=9.225 memavail=721428 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 316.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1273 bytes_read=5212 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941705  sysload=0.24 cputime=9.239 memavail=721176 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 317.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1279 bytes_read=5284 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63941261  sysload=0.24 cputime=9.254 memavail=720932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 318.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1285 bytes_read=5342 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940836  sysload=0.24 cputime=9.268 memavail=720932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 319.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1291 bytes_read=5400 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63940378  sysload=0.24 cputime=9.282 memavail=720680 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 320.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1297 bytes_read=5472 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939985  sysload=0.24 cputime=9.297 memavail=720932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 321.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1303 bytes_read=5544 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939693  sysload=0.22 cputime=9.311 memavail=721136 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 322.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1309 bytes_read=5602 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939448  sysload=0.22 cputime=9.326 memavail=719928 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 323.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1315 bytes_read=5674 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939308  sysload=0.22 cputime=9.340 memavail=719752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 324.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1321 bytes_read=5732 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939269  sysload=0.22 cputime=9.355 memavail=719752 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 325.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1327 bytes_read=5790 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939305  sysload=0.22 cputime=9.368 memavail=719500 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 326.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1333 bytes_read=5876 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939343  sysload=0.20 cputime=9.383 memavail=719628 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 327.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1339 bytes_read=5934 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939385  sysload=0.20 cputime=9.397 memavail=719132 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 328.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1345 bytes_read=5992 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939425  sysload=0.20 cputime=9.412 memavail=719892 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 329.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1351 bytes_read=6064 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939463  sysload=0.20 cputime=9.426 memavail=719640 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 330.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1357 bytes_read=6122 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939516  sysload=0.20 cputime=9.440 memavail=720144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 331.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1363 bytes_read=6194 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939584  sysload=0.18 cputime=9.454 memavail=720396 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 332.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1369 bytes_read=6266 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939626  sysload=0.18 cputime=9.469 memavail=720144 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 333.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1375 bytes_read=6324 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939630  sysload=0.18 cputime=9.482 memavail=720152 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 334.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1381 bytes_read=6382 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939610  sysload=0.18 cputime=9.496 memavail=720404 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 335.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1387 bytes_read=6454 bytes_retransmit=9 bytes_invalid=0 send_seq=174 receive_seq=174 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939534  sysload=0.18 cputime=9.511 memavail=720908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 336.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1393 bytes_read=6526 bytes_retransmit=9 bytes_invalid=0 send_seq=175 receive_seq=175 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939412  sysload=0.17 cputime=9.525 memavail=720908 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 337.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1399 bytes_read=6584 bytes_retransmit=9 bytes_invalid=0 send_seq=176 receive_seq=176 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939267  sysload=0.17 cputime=9.539 memavail=721664 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.3 pwm=0.000
Stats 338.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1405 bytes_read=6656 bytes_retransmit=9 bytes_invalid=0 send_seq=177 receive_seq=177 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63939107  sysload=0.17 cputime=9.553 memavail=721932 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 339.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1411 bytes_read=6714 bytes_retransmit=9 bytes_invalid=0 send_seq=178 receive_seq=178 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938926  sysload=0.17 cputime=9.567 memavail=722432 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 340.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=1417 bytes_read=6772 bytes_retransmit=9 bytes_invalid=0 send_seq=179 receive_seq=179 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938734  sysload=0.17 cputime=9.580 memavail=722436 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 341.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1423 bytes_read=6858 bytes_retransmit=9 bytes_invalid=0 send_seq=180 receive_seq=180 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938530  sysload=0.16 cputime=9.595 memavail=722436 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 342.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1429 bytes_read=6916 bytes_retransmit=9 bytes_invalid=0 send_seq=181 receive_seq=181 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938324  sysload=0.16 cputime=9.609 memavail=722440 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 343.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1435 bytes_read=6974 bytes_retransmit=9 bytes_invalid=0 send_seq=182 receive_seq=182 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63938131  sysload=0.16 cputime=9.623 memavail=722448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 344.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1441 bytes_read=7046 bytes_retransmit=9 bytes_invalid=0 send_seq=183 receive_seq=183 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937958  sysload=0.16 cputime=9.638 memavail=722448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 345.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1447 bytes_read=7104 bytes_retransmit=9 bytes_invalid=0 send_seq=184 receive_seq=184 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937809  sysload=0.16 cputime=9.652 memavail=722448 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 346.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1453 bytes_read=7176 bytes_retransmit=9 bytes_invalid=0 send_seq=185 receive_seq=185 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937680  sysload=0.14 cputime=9.666 memavail=722952 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 347.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1459 bytes_read=7248 bytes_retransmit=9 bytes_invalid=0 send_seq=186 receive_seq=186 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937570  sysload=0.14 cputime=9.680 memavail=723204 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 348.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1465 bytes_read=7306 bytes_retransmit=9 bytes_invalid=0 send_seq=187 receive_seq=187 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937463  sysload=0.14 cputime=9.694 memavail=723468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 349.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1471 bytes_read=7364 bytes_retransmit=9 bytes_invalid=0 send_seq=188 receive_seq=188 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937357  sysload=0.14 cputime=9.707 memavail=723468 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 350.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1477 bytes_read=7436 bytes_retransmit=9 bytes_invalid=0 send_seq=189 receive_seq=189 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937241  sysload=0.14 cputime=9.722 memavail=723720 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 351.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1483 bytes_read=7494 bytes_retransmit=9 bytes_invalid=0 send_seq=190 receive_seq=190 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937121  sysload=0.29 cputime=9.736 memavail=724224 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 352.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1489 bytes_read=7566 bytes_retransmit=9 bytes_invalid=0 send_seq=191 receive_seq=191 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63937021  sysload=0.29 cputime=9.749 memavail=724476 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 353.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1495 bytes_read=7638 bytes_retransmit=9 bytes_invalid=0 send_seq=192 receive_seq=192 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936947  sysload=0.29 cputime=9.765 memavail=724040 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 354.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1501 bytes_read=7696 bytes_retransmit=9 bytes_invalid=0 send_seq=193 receive_seq=193 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936883  sysload=0.29 cputime=9.778 memavail=724492 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 355.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1507 bytes_read=7754 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936827  sysload=0.29 cputime=9.792 memavail=724044 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 356.2: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1513 bytes_read=7826 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936795  sysload=0.27 cputime=9.806 memavail=724548 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 357.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1519 bytes_read=7898 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936768  sysload=0.27 cputime=9.820 memavail=724300 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 358.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1525 bytes_read=7956 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936741  sysload=0.27 cputime=9.834 memavail=724560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 359.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1531 bytes_read=8028 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936714  sysload=0.27 cputime=9.848 memavail=724308 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 360.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=1537 bytes_read=8086 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63936691  sysload=0.27 cputime=9.863 memavail=724560 print_time=0.001 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
INIT_TMC stepper_x
Unable to write tmc spi 'stepper_x' register CHOPCONF
Stats 431.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2095 bytes_read=12855 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935214  sysload=0.13 cputime=10.791 memavail=720768 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 432.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000013 mcu_task_stddev=0.000009 bytes_write=2101 bytes_read=12913 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935178  sysload=0.13 cputime=10.805 memavail=720516 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 433.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000013 bytes_write=2107 bytes_read=12985 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935159  sysload=0.13 cputime=10.820 memavail=720796 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 434.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000013 bytes_write=2113 bytes_read=13054 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935163  sysload=0.13 cputime=10.834 memavail=720548 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 435.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000013 bytes_write=2119 bytes_read=13108 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935171  sysload=0.13 cputime=10.848 memavail=720304 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 436.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000013 bytes_write=2125 bytes_read=13162 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935186  sysload=0.12 cputime=10.861 memavail=720808 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.4 pwm=0.000
Stats 437.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000015 mcu_task_stddev=0.000013 bytes_write=2131 bytes_read=13229 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935211  sysload=0.12 cputime=10.876 memavail=720556 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 438.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=2137 bytes_read=13298 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935247  sysload=0.12 cputime=10.890 memavail=721056 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 439.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=2143 bytes_read=13356 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935296  sysload=0.12 cputime=10.905 memavail=720336 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 440.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=2149 bytes_read=13428 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935352  sysload=0.12 cputime=10.919 memavail=720336 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.8 pwm=0.000
Stats 441.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=2155 bytes_read=13486 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935415  sysload=0.19 cputime=10.934 memavail=720336 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.5 pwm=0.000
Stats 442.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000008 bytes_write=2161 bytes_read=13544 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935483  sysload=0.19 cputime=10.948 memavail=720344 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 443.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=2167 bytes_read=13630 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935547  sysload=0.19 cputime=10.963 memavail=719624 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 444.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=2173 bytes_read=13688 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935598  sysload=0.19 cputime=10.977 memavail=719120 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 445.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=2179 bytes_read=13746 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935650  sysload=0.19 cputime=10.991 memavail=718876 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000
Stats 446.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=2185 bytes_read=13818 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935696  sysload=0.17 cputime=11.005 memavail=718876 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.6 pwm=0.000
Stats 447.3: gcodein=0  mcu: mcu_awake=0.001 mcu_task_avg=0.000012 mcu_task_stddev=0.000009 bytes_write=2191 bytes_read=13876 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63935734  sysload=0.17 cputime=11.018 memavail=718124 print_time=129.973 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-195.7 pwm=0.000