=============== Log rollover at Thu Feb 22 06:05:54 2024 ===============
Starting Klippy...
Args: ['/home/klipper-2/klipper/klippy/klippy.py', '/home/klipper-2/printer_data/config/printer.cfg', '-I', '/home/klipper-2/printer_data/comms/klippy.serial', '-l', '/home/klipper-2/printer_data/logs/klippy.log', '-a', '/home/klipper-2/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-111-g4f00f219'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 8 core Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
Python: '3.10.12 (main, Nov 20 2023, 15:14:05) [GCC 11.4.0]'
Start printer at Thu Feb 22 06:05:58 2024 (1708567558.8 60.1)
===== Config file =====
[stepper_x]
step_pin = ar54
dir_pin = !ar55
enable_pin = !ar38
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar3
position_min = -7
position_endstop = -5
position_max = 220
homing_speed = 80.0

[stepper_y]
step_pin = ar60
dir_pin = ar61
enable_pin = !ar56
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar42
position_endstop = 0
position_max = 220
homing_speed = 80.0

[stepper_z]
step_pin = ar46
dir_pin = ar48
enable_pin = !ar62
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar18
position_endstop = 0.0
position_min = -2
position_max = 180
homing_speed = 10.0

[stepper_z1]
step_pin = ar36
dir_pin = ar34
enable_pin = !ar30
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar43

[extruder]
step_pin = ar26
dir_pin = ar28
enable_pin = !ar24
microsteps = 16
rotation_distance = 7.495
nozzle_diameter = 0.600
filament_diameter = 1.750
max_extrude_only_distance = 220.0
heater_pin = ar10
sensor_type = ATC Semitec 104GT-2
sensor_pin = analog13
min_temp = 0
max_temp = 265
control = pid
pid_kp = 33.959
pid_ki = 2.220
pid_kd = 129.894

[heater_fan extruder_fan]
pin = ar44

[heater_bed]
heater_pin = ar8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = analog14
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.772
pid_ki = 3.164
pid_kd = 384.617

[fan]
pin = ar9

[mcu]
serial = /dev/ttyUSB1
restart_method = command

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345 hotend]
cs_pin = rpi:None

[adxl345 bed]
cs_pin = rpi:None

[resonance_tester]
accel_chip_x = adxl345 hotend
accel_chip_y = adxl345 bed
probe_points = 
	100,100,20

[input_shaper]
shaper_freq_x = 54.6
shaper_type_x = mzv
shaper_freq_y = 38.2
shaper_type_y = mzv

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2900
max_accel_to_decel = 1450
max_z_velocity = 20
max_z_accel = 60
square_corner_velocity = 5.0

[heater_fan stepstick_fan]
pin = ar7

[endstop_phase]

[pause_resume]
recover_velocity = 60.

[respond]

[gcode_macro m205]
gcode = 

[bed_mesh default]
version = 1
points = 
	-0.377500, -0.355000, -0.367500, -0.330000, -0.157500
	-0.347500, -0.385000, -0.432500, -0.432500, -0.357500
	-0.312500, -0.355000, -0.402500, -0.442500, -0.380000
	-0.275000, -0.310000, -0.357500, -0.387500, -0.330000
	-0.095000, -0.167500, -0.240000, -0.260000, -0.152500
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 19.0
max_x = 199.0
min_y = 12.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
webhooks client 140144136064016: New connection
webhooks client 140144136064016: Client info {'program': 'Moonraker', 'version': 'v0.8.0-311-g65a8271'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
MCU error during connect
Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/mcu.py", line 768, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/klipper-2/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/klipper-2/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/klipper-2/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/klipper-2/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/klipper-2/klipper/klippy/mcu.py", line 773, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/klipper-2/klipper/klippy/../.config(892): Wed Feb 21 18:22:00 2024
========= Last MCU build config =========
# CONFIG_LOW_LEVEL_OPTIONS is not set
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
CONFIG_MACH_LINUX=y
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="linux"
CONFIG_CLOCK_FREQ=50000000
CONFIG_LINUX_SELECT=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_LIS2DW=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_NEED_SENSOR_BULK=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/klipper-2/klipper/klippy/../out/klipper.dict(9192): Wed Feb 21 18:22:19 2024
Last MCU build version: v0.12.0-111-g4f00f219
Last MCU build tools: gcc: (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0 binutils: (GNU Binutils for Ubuntu) 2.38
Last MCU build config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Build file /home/klipper-2/klipper/klippy/../out/klipper.elf(701552): Wed Feb 21 18:22:22 2024
Unable to issue reset command on MCU 'mcu'
Unable to issue reset command on MCU 'rpi'
webhooks client 140144136064016: Disconnected
Restarting printer
Start printer at Thu Feb 22 06:09:27 2024 (1708567767.0 268.3)
===== Config file =====
[stepper_x]
step_pin = ar54
dir_pin = !ar55
enable_pin = !ar38
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar3
position_min = -7
position_endstop = -5
position_max = 220
homing_speed = 80.0

[stepper_y]
step_pin = ar60
dir_pin = ar61
enable_pin = !ar56
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar42
position_endstop = 0
position_max = 220
homing_speed = 80.0

[stepper_z]
step_pin = ar46
dir_pin = ar48
enable_pin = !ar62
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar18
position_endstop = 0.0
position_min = -2
position_max = 180
homing_speed = 10.0

[stepper_z1]
step_pin = ar36
dir_pin = ar34
enable_pin = !ar30
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar43

[extruder]
step_pin = ar26
dir_pin = ar28
enable_pin = !ar24
microsteps = 16
rotation_distance = 7.495
nozzle_diameter = 0.600
filament_diameter = 1.750
max_extrude_only_distance = 220.0
heater_pin = ar10
sensor_type = ATC Semitec 104GT-2
sensor_pin = analog13
min_temp = 0
max_temp = 265
control = pid
pid_kp = 33.959
pid_ki = 2.220
pid_kd = 129.894

[heater_fan extruder_fan]
pin = ar44

[heater_bed]
heater_pin = ar8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = analog14
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.772
pid_ki = 3.164
pid_kd = 384.617

[fan]
pin = ar9

[mcu]
serial = /dev/ttyUSB1
restart_method = command

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345 hotend]
cs_pin = rpi:None

[adxl345 bed]
cs_pin = rpi:None

[resonance_tester]
accel_chip_x = adxl345 hotend
accel_chip_y = adxl345 bed
probe_points = 
	100,100,20

[input_shaper]
shaper_freq_x = 54.6
shaper_type_x = mzv
shaper_freq_y = 38.2
shaper_type_y = mzv

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2900
max_accel_to_decel = 1450
max_z_velocity = 20
max_z_accel = 60
square_corner_velocity = 5.0

[heater_fan stepstick_fan]
pin = ar7

[endstop_phase]

[pause_resume]
recover_velocity = 60.

[respond]

[gcode_macro m205]
gcode = 

[bed_mesh default]
version = 1
points = 
	-0.377500, -0.355000, -0.367500, -0.330000, -0.157500
	-0.347500, -0.385000, -0.432500, -0.432500, -0.357500
	-0.312500, -0.355000, -0.402500, -0.442500, -0.380000
	-0.275000, -0.310000, -0.357500, -0.387500, -0.330000
	-0.095000, -0.167500, -0.240000, -0.260000, -0.152500
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 19.0
max_x = 199.0
min_y = 12.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
webhooks client 140144129368576: New connection
webhooks client 140144129368576: Client info {'program': 'Moonraker', 'version': 'v0.8.0-311-g65a8271'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
MCU error during connect
Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/mcu.py", line 768, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/klipper-2/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/klipper-2/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/klipper-2/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/klipper-2/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/klipper-2/klipper/klippy/mcu.py", line 773, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/klipper-2/klipper/klippy/../.config(892): Wed Feb 21 18:22:00 2024
========= Last MCU build config =========
# CONFIG_LOW_LEVEL_OPTIONS is not set
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
CONFIG_MACH_LINUX=y
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="linux"
CONFIG_CLOCK_FREQ=50000000
CONFIG_LINUX_SELECT=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_LIS2DW=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_NEED_SENSOR_BULK=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/klipper-2/klipper/klippy/../out/klipper.dict(9192): Wed Feb 21 18:22:19 2024
Last MCU build version: v0.12.0-111-g4f00f219
Last MCU build tools: gcc: (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0 binutils: (GNU Binutils for Ubuntu) 2.38
Last MCU build config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Build file /home/klipper-2/klipper/klippy/../out/klipper.elf(701552): Wed Feb 21 18:22:22 2024
webhooks client 140144129368576: Disconnected
Restarting printer
Start printer at Thu Feb 22 06:11:04 2024 (1708567865.0 366.3)
===== Config file =====
[stepper_x]
step_pin = ar54
dir_pin = !ar55
enable_pin = !ar38
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar3
position_min = -7
position_endstop = -5
position_max = 220
homing_speed = 80.0

[stepper_y]
step_pin = ar60
dir_pin = ar61
enable_pin = !ar56
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar42
position_endstop = 0
position_max = 220
homing_speed = 80.0

[stepper_z]
step_pin = ar46
dir_pin = ar48
enable_pin = !ar62
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar18
position_endstop = 0.0
position_min = -2
position_max = 180
homing_speed = 10.0

[stepper_z1]
step_pin = ar36
dir_pin = ar34
enable_pin = !ar30
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar43

[extruder]
step_pin = ar26
dir_pin = ar28
enable_pin = !ar24
microsteps = 16
rotation_distance = 7.495
nozzle_diameter = 0.600
filament_diameter = 1.750
max_extrude_only_distance = 220.0
heater_pin = ar10
sensor_type = ATC Semitec 104GT-2
sensor_pin = analog13
min_temp = 0
max_temp = 265
control = pid
pid_kp = 33.959
pid_ki = 2.220
pid_kd = 129.894

[heater_fan extruder_fan]
pin = ar44

[heater_bed]
heater_pin = ar8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = analog14
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.772
pid_ki = 3.164
pid_kd = 384.617

[fan]
pin = ar9

[mcu]
serial = /dev/ttyUSB1
restart_method = command

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345 hotend]
cs_pin = rpi:None

[adxl345 bed]
cs_pin = rpi:None

[resonance_tester]
accel_chip_x = adxl345 hotend
accel_chip_y = adxl345 bed
probe_points = 
	100,100,20

[input_shaper]
shaper_freq_x = 54.6
shaper_type_x = mzv
shaper_freq_y = 38.2
shaper_type_y = mzv

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2900
max_accel_to_decel = 1450
max_z_velocity = 20
max_z_accel = 60
square_corner_velocity = 5.0

[heater_fan stepstick_fan]
pin = ar7

[endstop_phase]

[pause_resume]
recover_velocity = 60.

[respond]

[gcode_macro m205]
gcode = 

[bed_mesh default]
version = 1
points = 
	-0.377500, -0.355000, -0.367500, -0.330000, -0.157500
	-0.347500, -0.385000, -0.432500, -0.432500, -0.357500
	-0.312500, -0.355000, -0.402500, -0.442500, -0.380000
	-0.275000, -0.310000, -0.357500, -0.387500, -0.330000
	-0.095000, -0.167500, -0.240000, -0.260000, -0.152500
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 19.0
max_x = 199.0
min_y = 12.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
webhooks client 140144135713840: New connection
webhooks client 140144135713840: Client info {'program': 'Moonraker', 'version': 'v0.8.0-311-g65a8271'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
Starting Klippy...
Args: ['/home/klipper-2/klipper/klippy/klippy.py', '/home/klipper-2/printer_data/config/printer.cfg', '-I', '/home/klipper-2/printer_data/comms/klippy.serial', '-l', '/home/klipper-2/printer_data/logs/klippy.log', '-a', '/home/klipper-2/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-111-g4f00f219'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 8 core Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
Python: '3.10.12 (main, Nov 20 2023, 15:14:05) [GCC 11.4.0]'
Start printer at Thu Feb 22 06:12:43 2024 (1708567963.7 55.9)
===== Config file =====
[stepper_x]
step_pin = ar54
dir_pin = !ar55
enable_pin = !ar38
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar3
position_min = -7
position_endstop = -5
position_max = 220
homing_speed = 80.0

[stepper_y]
step_pin = ar60
dir_pin = ar61
enable_pin = !ar56
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar42
position_endstop = 0
position_max = 220
homing_speed = 80.0

[stepper_z]
step_pin = ar46
dir_pin = ar48
enable_pin = !ar62
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar18
position_endstop = 0.0
position_min = -2
position_max = 180
homing_speed = 10.0

[stepper_z1]
step_pin = ar36
dir_pin = ar34
enable_pin = !ar30
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar43

[extruder]
step_pin = ar26
dir_pin = ar28
enable_pin = !ar24
microsteps = 16
rotation_distance = 7.495
nozzle_diameter = 0.600
filament_diameter = 1.750
max_extrude_only_distance = 220.0
heater_pin = ar10
sensor_type = ATC Semitec 104GT-2
sensor_pin = analog13
min_temp = 0
max_temp = 265
control = pid
pid_kp = 33.959
pid_ki = 2.220
pid_kd = 129.894

[heater_fan extruder_fan]
pin = ar44

[heater_bed]
heater_pin = ar8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = analog14
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.772
pid_ki = 3.164
pid_kd = 384.617

[fan]
pin = ar9

[mcu]
serial = /dev/ttyUSB1
restart_method = command

[mcu rpi]
serial = /tmp/klipper_host_mcu

[adxl345 hotend]
cs_pin = rpi:None

[adxl345 bed]
cs_pin = rpi:None

[resonance_tester]
accel_chip_x = adxl345 hotend
accel_chip_y = adxl345 bed
probe_points = 
	100,100,20

[input_shaper]
shaper_freq_x = 54.6
shaper_type_x = mzv
shaper_freq_y = 38.2
shaper_type_y = mzv

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2900
max_accel_to_decel = 1450
max_z_velocity = 20
max_z_accel = 60
square_corner_velocity = 5.0

[heater_fan stepstick_fan]
pin = ar7

[endstop_phase]

[pause_resume]
recover_velocity = 60.

[respond]

[gcode_macro m205]
gcode = 

[bed_mesh default]
version = 1
points = 
	-0.377500, -0.355000, -0.367500, -0.330000, -0.157500
	-0.347500, -0.385000, -0.432500, -0.432500, -0.357500
	-0.312500, -0.355000, -0.402500, -0.442500, -0.380000
	-0.275000, -0.310000, -0.357500, -0.387500, -0.330000
	-0.095000, -0.167500, -0.240000, -0.260000, -0.152500
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 19.0
max_x = 199.0
min_y = 12.0
max_y = 200.0
=======================
Extruder max_extrude_ratio=0.598682
mcu 'mcu': Starting serial connect
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
webhooks client 140547829971888: New connection
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
webhooks client 140547829971888: Client info {'program': 'Moonraker', 'version': 'v0.8.0-311-g65a8271'}
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
mcu 'mcu': Unable to open serial port: [Errno 2] could not open port /dev/ttyUSB1: [Errno 2] No such file or directory: '/dev/ttyUSB1'
MCU error during connect
Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/mcu.py", line 768, in _mcu_identify
    self._serial.connect_uart(self._serialport, self._baud, rts)
  File "/home/klipper-2/klipper/klippy/serialhdl.py", line 182, in connect_uart
    self._error("Unable to connect")
  File "/home/klipper-2/klipper/klippy/serialhdl.py", line 61, in _error
    raise error(self.warn_prefix + (msg % params))
serialhdl.error: mcu 'mcu': Unable to connect

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/klippy.py", line 176, in _connect
    self.send_event("klippy:mcu_identify")
  File "/home/klipper-2/klipper/klippy/klippy.py", line 263, in send_event
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/klipper-2/klipper/klippy/klippy.py", line 263, in <listcomp>
    return [cb(*params) for cb in self.event_handlers.get(event, [])]
  File "/home/klipper-2/klipper/klippy/mcu.py", line 773, in _mcu_identify
    raise error(str(e))
mcu.error: mcu 'mcu': Unable to connect
Build file /home/klipper-2/klipper/klippy/../.config(892): Wed Feb 21 18:22:00 2024
========= Last MCU build config =========
# CONFIG_LOW_LEVEL_OPTIONS is not set
# CONFIG_MACH_AVR is not set
# CONFIG_MACH_ATSAM is not set
# CONFIG_MACH_ATSAMD is not set
# CONFIG_MACH_LPC176X is not set
# CONFIG_MACH_STM32 is not set
# CONFIG_MACH_HC32F460 is not set
# CONFIG_MACH_RP2040 is not set
# CONFIG_MACH_PRU is not set
# CONFIG_MACH_AR100 is not set
CONFIG_MACH_LINUX=y
# CONFIG_MACH_SIMU is not set
CONFIG_BOARD_DIRECTORY="linux"
CONFIG_CLOCK_FREQ=50000000
CONFIG_LINUX_SELECT=y
CONFIG_USB_VENDOR_ID=0x1d50
CONFIG_USB_DEVICE_ID=0x614e
CONFIG_USB_SERIAL_NUMBER="12345"
CONFIG_WANT_GPIO_BITBANGING=y
CONFIG_WANT_DISPLAYS=y
CONFIG_WANT_SENSORS=y
CONFIG_WANT_LIS2DW=y
CONFIG_WANT_SOFTWARE_I2C=y
CONFIG_WANT_SOFTWARE_SPI=y
CONFIG_NEED_SENSOR_BULK=y
CONFIG_CANBUS_FREQUENCY=1000000
CONFIG_HAVE_GPIO=y
CONFIG_HAVE_GPIO_ADC=y
CONFIG_HAVE_GPIO_SPI=y
CONFIG_HAVE_GPIO_I2C=y
CONFIG_HAVE_GPIO_HARD_PWM=y
CONFIG_INLINE_STEPPER_HACK=y
=======================
Build file /home/klipper-2/klipper/klippy/../out/klipper.dict(9192): Wed Feb 21 18:22:19 2024
Last MCU build version: v0.12.0-111-g4f00f219
Last MCU build tools: gcc: (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0 binutils: (GNU Binutils for Ubuntu) 2.38
Last MCU build config: ADC_MAX=4095 CLOCK_FREQ=50000000 MCU=linux PCA9685_MAX=4096 PWM_MAX=32768 STATS_SUMSQ_BASE=256
Build file /home/klipper-2/klipper/klippy/../out/klipper.elf(701552): Wed Feb 21 18:22:22 2024
Unable to issue reset command on MCU 'mcu'
Unable to issue reset command on MCU 'rpi'
webhooks client 140547829971888: Disconnected
Restarting printer
Start printer at Thu Feb 22 06:14:33 2024 (1708568073.2 165.8)
===== Config file =====
[stepper_x]
step_pin = ar54
dir_pin = !ar55
enable_pin = !ar38
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar3
position_min = -7
position_endstop = -5
position_max = 220
homing_speed = 80.0

[stepper_y]
step_pin = ar60
dir_pin = ar61
enable_pin = !ar56
microsteps = 16
rotation_distance = 40
endstop_pin = ^!ar42
position_endstop = 0
position_max = 220
homing_speed = 80.0

[stepper_z]
step_pin = ar46
dir_pin = ar48
enable_pin = !ar62
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar18
position_endstop = 0.0
position_min = -2
position_max = 180
homing_speed = 10.0

[stepper_z1]
step_pin = ar36
dir_pin = ar34
enable_pin = !ar30
microsteps = 16
rotation_distance = 8
endstop_pin = ^!ar43

[extruder]
step_pin = ar26
dir_pin = ar28
enable_pin = !ar24
microsteps = 16
rotation_distance = 7.495
nozzle_diameter = 0.600
filament_diameter = 1.750
max_extrude_only_distance = 220.0
heater_pin = ar10
sensor_type = ATC Semitec 104GT-2
sensor_pin = analog13
min_temp = 0
max_temp = 265
control = pid
pid_kp = 33.959
pid_ki = 2.220
pid_kd = 129.894

[heater_fan extruder_fan]
pin = ar44

[heater_bed]
heater_pin = ar8
sensor_type = EPCOS 100K B57560G104F
sensor_pin = analog14
min_temp = 0
max_temp = 130
control = pid
pid_kp = 69.772
pid_ki = 3.164
pid_kd = 384.617

[fan]
pin = ar9

[mcu]
serial = /dev/ttyUSB1
restart_method = command

[mcu host]
serial = /tmp/klipper_host_mcu

[adxl345 hotend]
cs_pin = rpi:None

[adxl345 bed]
cs_pin = rpi:None

[resonance_tester]
accel_chip_x = adxl345 hotend
accel_chip_y = adxl345 bed
probe_points = 
	100,100,20

[input_shaper]
shaper_freq_x = 54.6
shaper_type_x = mzv
shaper_freq_y = 38.2
shaper_type_y = mzv

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 2900
max_accel_to_decel = 1450
max_z_velocity = 20
max_z_accel = 60
square_corner_velocity = 5.0

[heater_fan stepstick_fan]
pin = ar7

[endstop_phase]

[pause_resume]
recover_velocity = 60.

[respond]

[gcode_macro m205]
gcode = 

[bed_mesh default]
version = 1
points = 
	-0.377500, -0.355000, -0.367500, -0.330000, -0.157500
	-0.347500, -0.385000, -0.432500, -0.432500, -0.357500
	-0.312500, -0.355000, -0.402500, -0.442500, -0.380000
	-0.275000, -0.310000, -0.357500, -0.387500, -0.330000
	-0.095000, -0.167500, -0.240000, -0.260000, -0.152500
x_count = 5
y_count = 5
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 19.0
max_x = 199.0
min_y = 12.0
max_y = 200.0
=======================
Config error
Traceback (most recent call last):
  File "/home/klipper-2/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/klipper-2/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/klipper-2/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/klipper-2/klipper/klippy/extras/adxl345.py", line 331, in load_config_prefix
    return ADXL345(config)
  File "/home/klipper-2/klipper/klippy/extras/adxl345.py", line 202, in __init__
    self.spi = bus.MCU_SPI_from_config(config, 3, default_speed=5000000)
  File "/home/klipper-2/klipper/klippy/extras/bus.py", line 113, in MCU_SPI_from_config
    cs_pin_params = ppins.lookup_pin(cs_pin, share_type=share_type)
  File "/home/klipper-2/klipper/klippy/pins.py", line 98, in lookup_pin
    pin_params = self.parse_pin(pin_desc, can_invert, can_pullup)
  File "/home/klipper-2/klipper/klippy/pins.py", line 83, in parse_pin
    raise error("Unknown pin chip name '%s'" % (chip_name,))
pins.error: Unknown pin chip name 'rpi'
webhooks client 140547915581424: New connection
webhooks client 140547915581424: Client info {'program': 'Moonraker', 'version': 'v0.8.0-311-g65a8271'}