=============== Log rollover at Sun Apr 14 09:17:05 2024 ===============
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 09:17:15 2024 (1713086235.4 19.4)
===== Config file =====
[stepper_x]
step_pin = PA14
dir_pin = !PA10
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC4
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PC8
dir_pin = !PA15
enable_pin = !PC14
microsteps = 16
rotation_distance = 40
endstop_pin = ^PB0
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PD2
dir_pin = PD4
enable_pin = !PD3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC6
position_endstop = 0
position_max = 270

[extruder]
step_pin = PD5
dir_pin = !PD6
enable_pin = !PB3
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB11
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA4
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PB2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA3
control = watermark
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_390054001950425938323120-if00
baud = 115200
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PC1, EXP1_3=PC3, EXP1_5=PC0, EXP1_7=PA2, EXP1_9=<GND>,
	EXP1_2=PC2,  EXP1_4=<RST>, EXP1_6=PA0, EXP1_8=PA1, EXP1_10=<5V>
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
webhooks client 281472850485056: New connection
webhooks client 281472850485056: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-125-gbfb71bc2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_i2c3_PC0_PC1=PC0,PC1 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 20.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1109 bytes_read=4313 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64002118 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.66 cputime=1.890 memavail=717292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 281472850485056
webhooks: registering remote method 'reboot_machine' for connection id: 281472850485056
webhooks: registering remote method 'pause_job_queue' for connection id: 281472850485056
webhooks: registering remote method 'start_job_queue' for connection id: 281472850485056
Stats 21.5: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1115 bytes_read=4359 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000996 heater_bed: target=0 temp=-35.8 pwm=0.000 sysload=1.66 cputime=1.926 memavail=727340 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
MCU 'mcu' shutdown: ADC out of range
clocksync state: mcu_freq=64000000 last_clock=1868035796 clock_est=(20.163 1785465204 64000996.379) min_half_rtt=0.000128 min_rtt_time=20.258 time_avg=20.163(0.075) clock_avg=1785465204.776(4780629.210) pred_variance=2918458565.281
Dumping serial stats: bytes_write=1115 bytes_read=4446 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 19.946885 19.946885 9: seq: 14, identify offset=800 count=40
Sent 1 19.948765 19.948765 9: seq: 15, identify offset=840 count=40
Sent 2 19.950522 19.950522 9: seq: 16, identify offset=880 count=40
Sent 3 19.951920 19.951920 9: seq: 17, identify offset=920 count=40
Sent 4 19.953301 19.953301 9: seq: 18, identify offset=960 count=40
Sent 5 19.954654 19.954654 9: seq: 19, identify offset=1000 count=40
Sent 6 19.956046 19.956046 9: seq: 1a, identify offset=1040 count=40
Sent 7 19.957414 19.957414 9: seq: 1b, identify offset=1080 count=40
Sent 8 19.958785 19.958785 9: seq: 1c, identify offset=1120 count=40
Sent 9 19.960180 19.960180 9: seq: 1d, identify offset=1160 count=40
Sent 10 19.961537 19.961537 9: seq: 1e, identify offset=1200 count=40
Sent 11 19.962906 19.962906 9: seq: 1f, identify offset=1240 count=40
Sent 12 19.964334 19.964334 9: seq: 10, identify offset=1280 count=40
Sent 13 19.965674 19.965674 9: seq: 11, identify offset=1320 count=40
Sent 14 19.967038 19.967038 9: seq: 12, identify offset=1360 count=40
Sent 15 19.968529 19.968529 9: seq: 13, identify offset=1400 count=40
Sent 16 19.969928 19.969928 9: seq: 14, identify offset=1440 count=40
Sent 17 19.971298 19.971298 9: seq: 15, identify offset=1480 count=40
Sent 18 19.972692 19.972692 9: seq: 16, identify offset=1520 count=40
Sent 19 19.974039 19.974039 9: seq: 17, identify offset=1560 count=40
Sent 20 19.975423 19.975423 9: seq: 18, identify offset=1600 count=40
Sent 21 19.976866 19.976866 9: seq: 19, identify offset=1640 count=40
Sent 22 19.978495 19.978495 9: seq: 1a, identify offset=1680 count=40
Sent 23 19.980165 19.980165 9: seq: 1b, identify offset=1720 count=40
Sent 24 19.985633 19.985633 9: seq: 1c, identify offset=1760 count=40
Sent 25 19.987332 19.987332 9: seq: 1d, identify offset=1800 count=40
Sent 26 19.988882 19.988882 9: seq: 1e, identify offset=1840 count=40
Sent 27 19.990408 19.990408 9: seq: 1f, identify offset=1880 count=40
Sent 28 19.991879 19.991879 9: seq: 10, identify offset=1920 count=40
Sent 29 19.993535 19.993535 9: seq: 11, identify offset=1960 count=40
Sent 30 19.995239 19.995239 9: seq: 12, identify offset=2000 count=40
Sent 31 19.996804 19.996804 9: seq: 13, identify offset=2040 count=40
Sent 32 19.998327 19.998327 9: seq: 14, identify offset=2080 count=40
Sent 33 19.999915 19.999915 9: seq: 15, identify offset=2120 count=40
Sent 34 20.004113 20.004113 9: seq: 16, identify offset=2160 count=40
Sent 35 20.007429 20.007429 9: seq: 17, identify offset=2200 count=40
Sent 36 20.011759 20.011759 9: seq: 18, identify offset=2240 count=40
Sent 37 20.013269 20.013269 9: seq: 19, identify offset=2280 count=40
Sent 38 20.014783 20.014783 9: seq: 1a, identify offset=2320 count=40
Sent 39 20.016397 20.016397 9: seq: 1b, identify offset=2360 count=40
Sent 40 20.017892 20.017892 9: seq: 1c, identify offset=2400 count=40
Sent 41 20.019390 20.019390 9: seq: 1d, identify offset=2440 count=40
Sent 42 20.020979 20.020979 9: seq: 1e, identify offset=2480 count=40
Sent 43 20.022477 20.022477 9: seq: 1f, identify offset=2520 count=40
Sent 44 20.024217 20.024217 9: seq: 10, identify offset=2560 count=40
Sent 45 20.025788 20.025788 9: seq: 11, identify offset=2600 count=40
Sent 46 20.027108 20.027108 9: seq: 12, identify offset=2640 count=40
Sent 47 20.028445 20.028445 9: seq: 13, identify offset=2680 count=40
Sent 48 20.029717 20.029717 9: seq: 14, identify offset=2720 count=40
Sent 49 20.030986 20.030986 9: seq: 15, identify offset=2760 count=40
Sent 50 20.032358 20.032358 9: seq: 16, identify offset=2800 count=40
Sent 51 20.033857 20.033857 9: seq: 17, identify offset=2840 count=40
Sent 52 20.035238 20.035238 9: seq: 18, identify offset=2880 count=40
Sent 53 20.036604 20.036604 9: seq: 19, identify offset=2882 count=40
Sent 54 20.048739 20.048739 6: seq: 1a, get_uptime
Sent 55 20.101959 20.101959 6: seq: 1b, get_clock
Sent 56 20.154294 20.154294 6: seq: 1c, get_clock
Sent 57 20.206013 20.206013 6: seq: 1d, get_clock
Sent 58 20.257677 20.257677 6: seq: 1e, get_clock
Sent 59 20.309834 20.309834 6: seq: 1f, get_clock
Sent 60 20.361607 20.361607 6: seq: 10, get_clock
Sent 61 20.413313 20.413313 6: seq: 11, get_clock
Sent 62 20.464982 20.464982 6: seq: 12, get_clock
Sent 63 20.467507 20.467507 6: seq: 13, get_config
Sent 64 20.469008 20.469008 6: seq: 14, get_clock
Sent 65 20.475766 20.475766 7: seq: 15, allocate_oids count=19
Sent 66 20.476365 20.476365 8: seq: 16, config_analog_in oid=10 pin=PA3
Sent 67 20.476802 20.476802 15: seq: 17, config_digital_out oid=11 pin=PB2 value=0 default_value=0 max_duration=320000000
Sent 68 20.477029 20.477029 11: seq: 18, set_digital_out_pwm_cycle oid=11 cycle_ticks=6400000
Sent 69 20.477335 20.477335 11: seq: 19, config_digital_out oid=12 pin=PA8 value=0 default_value=0 max_duration=0
Sent 70 20.477563 20.477563 10: seq: 1a, set_digital_out_pwm_cycle oid=12 cycle_ticks=640000
Sent 71 20.477842 20.477842 12: seq: 1b, config_stepper oid=0 step_pin=PA14 dir_pin=PA10 invert_step=0 step_pulse_ticks=128
Sent 72 20.478109 20.478109 11: seq: 1c, config_digital_out oid=13 pin=PA13 value=1 default_value=1 max_duration=0
Sent 73 20.478328 20.478328 9: seq: 1d, config_endstop oid=1 pin=PC4 pull_up=1
Sent 74 20.478541 20.478541 7: seq: 1e, config_trsync oid=2
Sent 75 20.478759 20.478759 12: seq: 1f, config_stepper oid=3 step_pin=PC8 dir_pin=PA15 invert_step=0 step_pulse_ticks=128
Sent 76 20.479063 20.479063 11: seq: 10, config_digital_out oid=14 pin=PC14 value=1 default_value=1 max_duration=0
Sent 77 20.479315 20.479315 9: seq: 11, config_endstop oid=4 pin=PB0 pull_up=1
Sent 78 20.479438 20.479438 7: seq: 12, config_trsync oid=5
Sent 79 20.479757 20.479757 12: seq: 13, config_stepper oid=6 step_pin=PD2 dir_pin=PD4 invert_step=0 step_pulse_ticks=128
Sent 80 20.479930 20.479930 11: seq: 14, config_digital_out oid=15 pin=PD3 value=1 default_value=1 max_duration=0
Sent 81 20.480281 20.480281 9: seq: 15, config_endstop oid=7 pin=PC6 pull_up=1
Sent 82 20.480410 20.480410 7: seq: 16, config_trsync oid=8
Sent 83 20.480671 20.480671 8: seq: 17, config_analog_in oid=16 pin=PA4
Sent 84 20.480946 20.480946 15: seq: 18, config_digital_out oid=17 pin=PB11 value=0 default_value=0 max_duration=320000000
Sent 85 20.481182 20.481182 11: seq: 19, set_digital_out_pwm_cycle oid=17 cycle_ticks=6400000
Sent 86 20.481461 20.481461 12: seq: 1a, config_stepper oid=9 step_pin=PD5 dir_pin=PD6 invert_step=0 step_pulse_ticks=128
Sent 87 20.481731 20.481731 11: seq: 1b, config_digital_out oid=18 pin=PB3 value=1 default_value=1 max_duration=0
Sent 88 20.481924 20.481924 11: seq: 1c, finalize_config crc=3587364166
Sent 89 20.482297 20.482297 26: seq: 1d, query_analog_in oid=10 clock=1862400000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=12005 max_value=32303 range_check_count=4
Sent 90 20.482446 20.482446 13: seq: 1e, queue_digital_out oid=11 clock=1817863222 on_ticks=0
Sent 91 20.482783 20.482783 13: seq: 1f, queue_digital_out oid=12 clock=1817879820 on_ticks=0
Sent 92 20.483102 20.483102 26: seq: 10, query_analog_in oid=16 clock=1866240000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=1503 max_value=32303 range_check_count=4
Sent 93 20.483358 20.483358 13: seq: 11, queue_digital_out oid=17 clock=1818135857 on_ticks=0
Sent 94 20.483721 20.483721 6: seq: 12, get_config
Sent 95 20.487775 20.487775 7: seq: 13, stepper_get_position oid=0
Sent 96 20.490651 20.490651 7: seq: 14, stepper_get_position oid=3
Sent 97 20.491939 20.491939 7: seq: 15, stepper_get_position oid=6
Sent 98 20.493818 20.493818 7: seq: 16, stepper_get_position oid=9
Sent 99 21.453461 21.453461 6: seq: 17, get_clock
Dumping receive queue 99 messages
Receive: 0 19.920764 19.920397 48: seq: 11, identify_response offset=0 data=b'x\xda\x9dY\xfbo\xe36\x12\xfeWt\x06\x8ak\xafq`I\x96\x1f\x01\xfaC\x92f{E\x9bm\xbaN\xee\x0e(\nA\x96h['
Receive: 1 19.922138 19.921778 48: seq: 12, identify_response offset=40 data=b'XY\xd2\x8aR\x1eW\xec\xff~\xdfpH\x8a\x92\xbd-p\x01\x1c\xf31\x1c\x92\xc3y|3\xfec\x92\xd4\xf5\xe4j\xf2S\x91\xd7\xb5'
Receive: 2 19.923389 19.923053 48: seq: 13, identify_response offset=80 data=b'h&\x17\x93m\x97\x17Y\xfc,\x1a\x99W\xa5\xc4\xd4>M\xaf\xbc\xaf\xfd\xe8j5\rf\xfez\xfa)\x9c\xfa\xdfn\xfdo\xbc\xd5e'
Receive: 3 19.924704 19.924371 49: seq: 14, identify_response offset=120 data=b'x\xe9{46[\xceB\xef\xebF\x14"\x91\xe2\x1b\xef7,\x99\xae\xa6\xdb&)\xd3\x83\xd7\x88\xe7\x9cxy\xc12\x9c\x05\xcb\xdf\xbd'
Receive: 4 19.926012 19.925659 49: seq: 15, identify_response offset=160 data=b'm^vm^Hp\r.\xc3\xe82\x98\x06\xdf\xfa\xf3o\xb7\xc17\x1e\xf7q\x8a\xb4:\x1e\x932\xc3\xfe\x7fL\x92\xa2\xa8\xd2\xa4\x15'
Receive: 5 19.927262 19.926960 49: seq: 16, identify_response offset=200 data=b'q\x95g\xd2K\xab\xael\xbf\xfb*\x9d\\\xad\xe8\xb0m\x8bS\xc6I\xfa\xd1\xc3,\x86\x9d\xf9\xf9\xd2!\xc82CPWR}\xe5\xe5'
Receive: 6 19.928552 19.928248 49: seq: 17, identify_response offset=240 data=b'w_u^\xdd\x15E\xdc\xd5\xbc`\xdd/\xf8\xd4\x89\xe6\xcd\xf2\xc4\x01>\x12u#d\x1b\xb7y\xfaQr\xaf\xc5\x15\xe51oc\xb3'
Receive: 7 19.929807 19.929525 49: seq: 18, identify_response offset=280 data=b'\xab\x97\x97\x10\x9d\xde\x1f\x07L!\x92&\x96\x87\xae\xcd\xaa\x97rr\x15\xd0\xd5\xca]\xbe\xc7\x89^\x8bp\x1e\x99-d\x9d\xc7\xdc\x9c\\'
Receive: 8 19.931011 19.930714 49: seq: 19, identify_response offset=320 data=b'-g=U\x99\x14\xd5>\xceK{zu\xec\xc9U\xd8s\xd2G6\x14\xdc\x8d{9D=;5(\x9a!\xb3\x81\x0c\xa2\xa5%\xce'
Receive: 9 19.932285 19.931935 49: seq: 1a, identify_response offset=360 data=b'\xf2}\xde&E\\u\xedh\xc1sRt\x82\xfa\x99\xd8%]\xd1\xc6v\xe0\x98\xbc\xc6Y\xd7$-\x1e\\\x9d\xd3\xef\xf9\t\xbcg['
Receive: 10 19.933653 19.933296 49: seq: 1b, identify_response offset=400 data=b'\xd5\x03^\xe9`\xf3`a\x89\x0f\xd9|\xbe\\\xcd\x0cq#c\xbd\xb70\x8dln[\x91m-lki[\xa2H\xde\xec\xa3M\xae'
Receive: 11 19.935029 19.934651 49: seq: 1c, identify_response offset=440 data=b'\x16\xa1\xdd$\x0fR\xcf\x08}\xde\x0f\x17\xb9\x0c\xb2\x97\xb3/\xb3\xb6D\xc7\xba[\x07\x91= X\xf5T\xfd5JQ\xd5\xf9\xab(F'
Receive: 12 19.936402 19.936086 49: seq: 1d, identify_response offset=480 data=b'\x02\xcc\x926\x89e\xfe_\xc8\xec\xd0\xc1 \xda\x98\x04\xe7(\x96\x14\x18\xcaK\xe7\xd8Qd\x99\xd6/\xc73\x8f\x92\xbeA\xd9z\x1e\xfa'
Receive: 13 19.937780 19.937411 49: seq: 1e, identify_response offset=520 data=b'I\x0e\xdd\xf8\x910r\xf2J\xf3\xfe\xc4\xb8\xee\x981\xd9W\x9b?\x8b\xf8\x90\xef\x0f\xea\x86\xe1\xca\xa5\x87\x96\xee\x0bq*/\xcf\xce\xc5'
Receive: 14 19.939154 19.938787 49: seq: 1f, identify_response offset=560 data=b'\xed[-X6\xe1`\xa5\xb1\x8cs\x8b\xf5T|\x94\xfb\xef\xbe\xfa\x07\\A8\\\xfb\x92\xb7\x07\x88!N\xa5}\xc4\xb0\xd76\xd9.'
Receive: 15 19.940575 19.940219 49: seq: 10, identify_response offset=600 data=b"\xd7\x81}\x9e\xd4\xea\x8fL\x8b\x8f\xb6\x9dg\xb6\xf9V\xa6\xf1PU\xbc\xf4\x98\xc5'\xda3sv\x10\xe43\xed\xd1\xd1\x8d\xb5Rgy"
Receive: 16 19.941883 19.941545 49: seq: 11, identify_response offset=640 data=b'c\x9a\xec\x10\x14qO\xd5\x15R8L\x83\xfeb\xedA4\xc7\nvZ\x9f\x95\xa8;\xdd\x0bu\xd1_\xbb=\xa6]\xd2X\xddh^'
Receive: 17 19.943136 19.942827 49: seq: 12, identify_response offset=680 data=b'\xe3\x13#\xf7Z;H\x9a\xd7\xe6G\xc1\x1a\xd6\xbb\x94\xb6!y\xf4b\xc5\xa53\xb1\xed\xa0\xcf\x15\xa2\xc5\xda\xf4\xc0e\xaft\x99\xdf\xc7'
Receive: 18 19.944431 19.944117 49: seq: 13, identify_response offset=720 data=b'\xb7d\x8dH\xe0o\x9bL4\xb4\x1f\x9co\xc3\xce 0\x04/M\xde\x8a\x13\nRZ&\xf4/&\xe2(\x9a\xbd(\xd3\xb7\x98\xbc\x06'
Receive: 19 19.945685 19.945369 49: seq: 14, identify_response offset=760 data=b'\x0e\x81!\xf6 \xf1\xa1:\x8a\x13\xdf,\x93c\xed\x1a\x80\xee[\xcf<\xf4\xdd8z\xef\xb5\xf8\xbaV\xc6M\xbe\xdf\x8b\x86.!\xc9>'
Receive: 20 19.947290 19.946885 49: seq: 15, identify_response offset=800 data=b'\xc81E\xfd\xe6*2\xe0LI+\xac\x80\x82\xf9\xc5d\x97\xc3W\xc3\xa4c\x96\xa1\x976)k\xcc\xc5d\x0fkV\xe7\x84\x90uO'
Receive: 21 19.949177 19.948765 49: seq: 16, identify_response offset=840 data=b'\xd1\xc0\x1c\xb8\xdb\xd5\xf4\n\xb0\xc3\x8b\x89v|\xb1\xc4~14\xd0\xfauj\xb3\x9c\x17\xc1\x88\x8c\x9e\xc0\x90\xf5\xcf\xb1\x80\x10\xc9-\x1d'
Receive: 22 19.950901 19.950522 49: seq: 17, identify_response offset=880 data=b'\xab,\xdf\xbd\xc5xk\xcb\xab\x11\xca\xa4<\x1d\x9ep\x02\x9a\xd5V\xb6\xe6e\xfc\x86Cz\x1a\x8b\x0b\xa1\x9d\xc6\x8c\t\xd5\xf2N\xba\x9e'
Receive: 23 19.952276 19.951920 49: seq: 18, identify_response offset=920 data=b'\x10]\xe5\xc7 #\xfa\xa6\xe7\x15\x92u}\x1e\xf4\xabd\xb5k_\x92F\xb8\xcba\x9f\xd6&\xb3\xc44\xcfqZD\xccI\xeb\xd2\xf8'
Receive: 24 19.953647 19.953301 49: seq: 19, identify_response offset=960 data=b'\xfas\xba~&\xca\x16\x97\xf7\xaa\xdd\x0e\x1b*\xa3\xb6q\x11\xf3\xc6=+1\xda\xd7\x8cBg\xa6\xab\xb3\xfe\xa5\x19<\x1c:g\x9b\x08'
Receive: 25 19.955022 19.954654 49: seq: 1a, identify_response offset=1000 data=b'o\xc6*1\x8a\xe8\x03}\xc3i\xd7#:\xa5B]\xef\xbb\x16+K0\x0e\xfa\xff\xa7\x8e\x1f{\x1d\xd7N\xbf\xef\x01\xb8\xec\xb1\xf0 '
Receive: 26 19.956396 19.956046 49: seq: 1b, identify_response offset=1040 data=b"\xd2\x8f\x0eT\x08}s\x86\x11R\xb0'\xa8+\xb8\x91\xf1\xfeN\x94Z\x18\x06\xc3 :\x12\xc6r5$\x1b\xcbb\xb94\xf3\xa30;"
Receive: 27 19.957774 19.957414 49: seq: 1c, identify_response offset=1080 data=b'\xe6\x13\x8d\xe8N\x18\xd9\xd79\x89S_\x00ud\x88\x08K\xf9\x8e%\xb2\x0c\x0c\x83s\x9e\xf9\x0b<\x1c\xc1\x0f\xe4\xce\x1dD\x048\x8a'
Receive: 28 19.959148 19.958785 49: seq: 1d, identify_response offset=1120 data=b'\xcc\x11\xfb\x82\xa5\xd6\x89s\x98\xcb\xeeQ\xb9p\xc0\x8f\xcc\x92\x11\x1a\xb0\xe4\xf6\xada\n\x96\x98\xc2\x8f5Tz`\xf6\xb8\xc6*\x0e\xca'
Receive: 29 19.960526 19.960180 49: seq: 1e, identify_response offset=1160 data=b'\xc2\xf0\x9d\xc3\xa7\xe1\xe6\n\x88\x00i\xcftS\xadgW6\xde\x0f\x0b@E4\xee\x1dF\x80\x11\xe7\x0eO\x88\xd4\r\x14z\xb1<\x07'
Receive: 30 19.961898 19.961537 49: seq: 1f, identify_response offset=1200 data=b'P\x06\x8b\x16\xbc\xa8\x14\xaf\xfa\x08\x08\xb0\xd6\xe2\xf3\x86}\xb0\xcfDF\x1e\x7f\x01\x8b \x15\xe8\x86\x83P\x08\xca\xefz\x8d\xef-|\xe9'
Receive: 31 19.963274 19.962906 49: seq: 10, identify_response offset=1240 data=b'3\x9d\xe3#\x9c\xd9pnf\x07^\x90\x86\xb4\x17\x84\xff\x15\x8e\x0f\xc3\x92E\xbf\xe4\x9c\x0b<\xe6\xb22\x8e\xefX\xc9\xfc\x1ct9a'
Receive: 32 19.964655 19.964334 49: seq: 11, identify_response offset=1280 data=b"\xba\xd0\xe7\xf8\xf2=Bh\x01\xa3\xa2?\x0b.\xd1zHu>\xb6D+\xa2R\xf8'\xa6\x00\x06\xbf\x98\x13\x9a\xb4\x86\xe7\xaf{\x02\x15"
Receive: 33 19.966022 19.965674 49: seq: 12, identify_response offset=1320 data=b'6I{9\xb0z6\xce:Q\x17+\xc0R\xa3\x97\x81\xa8\x95{\xb7\xd1\x87\x1d4^D\xaf&\x19\x92\xc9\x9e\xb1\x00\xa8\xc4\xaa\xa7k'
Receive: 34 19.967399 19.967038 49: seq: 13, identify_response offset=1360 data=b']T$\xea\xaa\xd1!\x99\xadW\xf5\xad\x92\x88\xd7:\xc7\x93\xb8\x00`m9\x8dn\xe1\x12\xc1kq\xb88g\xc7\x8e\r\xcc?\x1b\xa4'
Receive: 35 19.968899 19.968529 49: seq: 14, identify_response offset=1400 data=b'E\xf9\xed\xf5\xf7\xb7\xf1\xfd\xf5\x7f(\xa0\xae\xf1D7O\x9b\xf8\xe1\xc7\xf7\x1b\xcaN\xfc\xf8\xe1z\x8d\x8f?C"\x8e\xe6\x85j\x9e\xd0'
Receive: 36 19.970270 19.969928 49: seq: 15, identify_response offset=1440 data=b'\xdc,\xf0Y\x12\xc9\xcd\xe2\x82Z\xa7\x14+|\xd6\x8abuA\xad!E\x80Y\x7fF\xff|E\x03$\xa7\xdag\xa8B\xfa7g\xaa'
Receive: 37 19.971649 19.971298 49: seq: 16, identify_response offset=1480 data=b"\xf0B\xb5\x87TD@\x1f\xa6!\x923\x14\xb7\xd8\xecV\xedu\x8b\xadn\x07;A\x8b\xd5\xcc5\xeer\xbd\xc4'\x1a\xcf&\x8a\xf5\x1c"
Receive: 38 19.973022 19.972692 49: seq: 17, identify_response offset=1520 data=b'\xac#|\xc2\xd1t\xc0\x87\xa3i\x9f\xe6\xfd\x13\x02\xb5\xfe6\xc0\xc6\xea\x06\xb3\xd1|x\xc2\xfe\xf6\xe7_n\x7f\x8a\xdf}\xb8\xfb\x95\x0c'
Receive: 39 19.974403 19.974039 49: seq: 18, identify_response offset=1560 data=b'm\xa6\xfe.&\xf7\xb7O\xa0\x94\xed1\x0c\xf6\xb3\xad\xff\xfa\n\xca\x87\x7f\xdf\xf3c\x06\x94\xb0}\xb8\xdb\xdc}\xf8\xd7\x1ds~\xda\xdc'
Receive: 40 19.975773 19.975423 49: seq: 19, identify_response offset=1600 data=b'\xa8k\x01\xdc\xe2\x1fU9\x06\xd3i\xf3\x06%-\x88\xe4\x1dd\xf2\x8ed\xb2y\xbc~\xdc\xc4\x9b\xa7\xfb\xcd\xaf\xf1\xcd\xf5\xe6\x8e\xd8.'
Receive: 41 19.977198 19.976866 49: seq: 1a, identify_response offset=1640 data=b'h\xf8\xee\xe1\xe1\xeeC|\xf3\xcb\xe3?\xe3\xbb\xef\x7f\xc0\xb8\xff\x99\x10j\x07\xcc\xac\xb2:U8\xd1HL7]]b\x0c\xe6h\xce'
Receive: 42 19.978928 19.978495 49: seq: 1b, identify_response offset=1680 data=b'\xcc\x0ehEa\xec8\xd0\x8b\xb0\x1f2J0WC\xce\x8bGf\xc0<\xf0\x02\xe7\x82\xcb2z\xfexw\x8f\x83_?>}Pw'
Receive: 43 19.980600 19.980165 49: seq: 1c, identify_response offset=1720 data=b'\xc1\xfa\x87k\x9c\xe7\xb7\xd9\x85\xbf\xf8\x1d\x9d\x1b\xea\xc0\xdds\xef\x96za\xa0{\xdfSo\xbe\xd2\xbd;\xea\xc1\xe9q\xef\x1d\xf5V\x8a'
Receive: 44 19.986020 19.985633 49: seq: 1d, identify_response offset=1760 data=b'\xcb\xe7\x81WG\x8a\xa4jH~\x18\x86\xea\x9a\x89\x8cf\xf3e\xa6n\xd8\x16"\x9a\xf9\xc1\x16G\xd1\xab\xb4\xb8X\x05\xd9\xef\x93\xb6\x05'
Receive: 45 19.987683 19.987332 49: seq: 1e, identify_response offset=1800 data=b'\xaa\x15(\x06Z\x81B\xd5\x02O2fB\x1d99\x99\x06\x19Q\x9cg\xfa\xba\x9e2\xff\x1d\x83-.o\\\x17\xe4\xc5\xde<\x93-'
Receive: 46 19.989243 19.988882 49: seq: 1f, identify_response offset=1840 data=b'd\x1c\x12o\x93\xd2+\xab\xd6\x83;\xf3($x\x88b\x1c\xba<\xe5\x95\xbc\x97C\x8e6{\x17\xe9\xd5\xf0\x8f\xd8\x89c.\xd6\xfe\xbd'
Receive: 47 19.990788 19.990408 49: seq: 10, identify_response offset=1880 data=b'\xa5\xb8\x8d|v\x0f\xaeH\x12\x93\xd6\xcb\xa5\x97\xe8\xbd8{\xe7,F\x13K"%\xcf\xc4\xb9\x16\x8f\xaa\x10\xaf\x00\x10\xb6\x13\xa5g\x12'
Receive: 48 19.992264 19.991879 49: seq: 11, identify_response offset=1920 data=b"\\\xbb\x1eb\xb8\xe5\xc2\x9cW'\x8d\xc4\x94h\x9a\xaaQi\x8c\x99h\x04\x90\x86lUy\xeeGF:\x1e\x8c\xc2K\x0fIY\x8a\x82"
Receive: 49 19.993964 19.993535 49: seq: 12, identify_response offset=1960 data=b'\xablf\xc2\x94\xae\xfaJ\x1a#\x11F\xa2\x86J\x17\x03\x95v\xf5c \xa3S$G\x01\x18\xc39\xb4\x99<V\xcf\xc2\x1c\xc4\xa32'
Receive: 50 19.995611 19.995239 49: seq: 13, identify_response offset=2000 data=b'\x0b\xf9\xdc~\xda\x16el\x19\x86c\xf2\xc9\xbc\xc6\xfev\xff\xd09\x00d\xe7\xb1vQVkF\xa9z\xa2th\xbe\x1a\x0e\x1awO'
Receive: 51 19.997166 19.996804 49: seq: 14, identify_response offset=2040 data=b'1\xc2\x19\xd7\x904=\xe4\xb5\xe66w.>\x80\x9c\x0e\r\xa5h\xf7\xc9+\xa9\xd6\xca\xc8\x90\xcb#\xf7H\x8e\x92\xbd\xf0\x907\x03 '
Receive: 52 19.998731 19.998327 49: seq: 15, identify_response offset=2080 data=b'\x98\xe7\xc1\xdd\xees)\x05\xb6\x04\xe2\xcf\xba\x82\xf2v,&<\xe5\xe9P\xa5tU<\x0b\x12>A\xa9//8$M\xa6\xf4SS'
Receive: 53 20.000343 19.999915 49: seq: 16, identify_response offset=2120 data=b'Su\xe0\x9e$\xae \xa6\x87V\xb3+\xaa\x17\xc6\xa8\xef\xa1\xd4\x89\xc7\xd7!\x8bP\xbe`>\x9a \xfdP\x13\x14\xd8\xdd\x89\xbc\xac\x19'
Receive: 54 20.004600 20.004113 49: seq: 17, identify_response offset=2160 data=b"\xc9q\xde\xa8\xa6J:i?\x1c*\x9fku\xbdn\xaa=t\xe2\x88\xa3't\xb7\x1d\xa0\x10N\tY\x0b\xb25\xaa\x85~\x10\xfaR"
Receive: 55 20.007786 20.007429 49: seq: 18, identify_response offset=2200 data=b"\xa0!eo\xb0\r\x89\x1a\xdaDzK\xb0pc\tN\xa4\xe3\xbd\xe4E\x01\x84\x90\x82\xdf\xa0\x90\xc6\x98\xa7_i%\xf4'+\x08V"
Receive: 56 20.012136 20.011759 49: seq: 19, identify_response offset=2240 data=b'l`s\xfc\x86\xea\x00D\x91\x1f\xbb\xa3\x193\xf6\x80\xeboL\xb1L\xa5\xed`\xa6\xacT\xb9\r\xb7\xc0\xbc\xd1f\xdbV\x95\xb7K\xd4'
Receive: 57 20.013661 20.013269 49: seq: 1a, identify_response offset=2280 data=b'\xed\xf8fT\xa5xtU\x8aD\x06BU\x1e\xe4\xa2\xde\xa3\x92\x07\xad\x048\x92B\xb9\xb9\xa7Rv5\x01$\xecH\x15S\xd6o\xe8'
Receive: 58 20.015169 20.014783 49: seq: 1b, identify_response offset=2320 data=b'\xb1*\xcc#\x87\xec\xca\x8f\xe0\x01\xff\x94q\xbd\xd7\x19\x97\xfd\x04\x94\x90\x95\x1d\xe0NV\x8d\xb2O\xa0,\xe9\xa5R?e_ZcO'
Receive: 59 20.016787 20.016397 49: seq: 1c, identify_response offset=2360 data=b'T\x95\x05\x9c\xd73\x18$\xdb\xc2\xf8${S.Sx\x1a\xfcq\rsT\xee\xb8\xf2~\x81WDT\xdc\x12^\xdbQ\xb9K\xfe\x8d'
Receive: 60 20.018285 20.017892 49: seq: 1d, identify_response offset=2400 data=b'a\xa1\xfa-\xc1:H\xfd\x0bC\xc65,IE\x03\xf8*\xad\x1d)\xa6i\x8a\x006\\\xb3\xaa\x1a\xbf\xbf\xbe\xfd\x89\xcb\x8d\xa6\xe0\xa6'
Receive: 61 20.019791 20.019390 49: seq: 1e, identify_response offset=2440 data=b'p2\t\xaeH\x1ar\xf6\x94\x17\x9c\x01\x83\xf4Z\xac\xdbT\xbe\xd4\xae\x95-\x87 0b\xc9I\x89\x8f\x82\t E\xe8\xaf\xa2HE'
Receive: 62 20.021338 20.020979 49: seq: 1f, identify_response offset=2480 data=b" \xddY\xa8\x08\xc5\x9dE\xa4\x9e\x1e\x9d\xc5b\x89v\xf8\x19\x9c\x8a<\x85\xa8\xb1~\xf2\xc3\xfb'\xef\x87\x87\x9f\x9f\t\xcb@\xb65\xfc"
Receive: 63 20.022867 20.022477 49: seq: 10, identify_response offset=2520 data=b'\x85\xe0\xdfVL\xa9aP\xd0Rv\x1e\x9f\xcb$\xd7a\xff\x13\xc9`E\xe2\xd4\x11<5\xc3\x89\xc2T\xfdP\xa1\x12\xc6\x1e\x97\xafl'
Receive: 64 20.024674 20.024217 49: seq: 11, identify_response offset=2560 data=b'\xb9\x19aJ\xd7\xc2\x14rW%3\x1a3\xcf\xac\xd2!x\x94\xd8&\xa8X\xad\xaa\x9d\xaa<\xf1g\xa7\xd6+t#\xeew\x9f\x06\xeb'
Receive: 65 20.026141 20.025788 49: seq: 12, identify_response offset=2600 data=b'\xbeN)\xa1\xfa\xb6\xec\xb8Z\xf7e\xbe\x01\xe7C\x85\x94~\x7f\xba\x87[E\x84p\xfc\xber\x16\x1b1;\x95\x0b\xd5g\xb1\x10\xd07'
Receive: 66 20.027442 20.027108 49: seq: 13, identify_response offset=2640 data=b'\xc5)\x87\xd4V\xa98\xd3\xba$R\x82f\xbd@\xbc1\xd4\xd02\t\x9c\x92\x95\xbe\x95\xc9D\xbb4U%\xb3\x94^\x03\xdc\xb0\x97['
Receive: 67 20.028755 20.028445 49: seq: 14, identify_response offset=2680 data=b'\xb5]\xad\x94\xc6\xc3$\x81~\x90`\xba\t\x9f\xa4\x18Z\xa6bT\xf3\x9a\x12\x92p\xd7\x0c\xaa.}\tB\x17NLZ\xc5\xe9\xbb\xcb'
Receive: 68 20.030057 20.029717 49: seq: 15, identify_response offset=2720 data=b'r\xdb)\xff\x9cqe\t\xa0\x04v\x1e\x9b\x00"\xf9jS\x82M\xb2w}\xa6\x14v^\x0e\xe1\xb9\x9c\xfe\xe41\xdc\xba\x8d\xf3*S'
Receive: 69 20.031314 20.030986 49: seq: 16, identify_response offset=2760 data=b'\x8a\xcen\x12\xfdW\xaf8W\xd0\xafi\x15\x16[\xf9\x0c\x04e\xafz\xb2;\xea/\xf9\x895l\xde\xa7\xc5\xa3\x9c\x99k\x8b9\xb8\xce'
Receive: 70 20.032698 20.032358 49: seq: 17, identify_response offset=2800 data=b"FN`\xf8\x9egm\xb3c'\xce\x8f\x1c8\x99\xf4\xe9\x05(\x87f\xcb\xf4\xdd\xec\xb8W\xf64\xb1\xa9\xfa\xd9r\xb8c\xc8\xeb\x80\x9c"
Receive: 71 20.034197 20.033857 49: seq: 18, identify_response offset=2840 data=b'\x9cB\x8c\xfc\xdbP\xe7Zy\x04\x1f\xa4\x7fH\x86\x0fz\x9e]\xfa\xc1\xe5l\xea\x07\xd1t\xbf\xddm\x97\xfe6\r&\x9f\xff\x071\xa2'
Receive: 72 20.035567 20.035238 11: seq: 19, identify_response offset=2880 data=b'\x13\xa0'
Receive: 73 20.036940 20.036604 9: seq: 1a, identify_response offset=2882 data=b''
Receive: 74 20.049082 20.048739 12: seq: 1b, uptime high=0 clock=1778132616
Receive: 75 20.102268 20.101959 11: seq: 1c, clock clock=1781538862
Receive: 76 20.154573 20.154294 11: seq: 1d, clock clock=1784888686
Receive: 77 20.206331 20.206013 11: seq: 1e, clock clock=1788198393
Receive: 78 20.257934 20.257677 11: seq: 1f, clock clock=1791504805
Receive: 79 20.310147 20.309834 11: seq: 10, clock clock=1794843380
Receive: 80 20.361951 20.361607 11: seq: 11, clock clock=1798156706
Receive: 81 20.413636 20.413313 11: seq: 12, clock clock=1801465666
Receive: 82 20.465321 20.464982 11: seq: 13, clock clock=1804772641
Receive: 83 20.467826 20.467507 10: seq: 14, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 84 20.469341 20.469008 11: seq: 15, clock clock=1805031421
Receive: 85 20.484000 20.483721 15: seq: 13, config is_config=1 crc=3587364166 is_shutdown=0 move_count=1024
Receive: 86 20.488119 20.487775 8: seq: 14, stepper_position oid=0 pos=0
Receive: 87 20.490952 20.490651 8: seq: 15, stepper_position oid=3 pos=0
Receive: 88 20.492216 20.491939 8: seq: 16, stepper_position oid=6 pos=0
Receive: 89 20.494408 20.493818 8: seq: 17, stepper_position oid=9 pos=0
Receive: 90 21.372879 20.493818 15: seq: 17, analog_in_state oid=10 next_clock=1881600000 value=32701
Receive: 91 21.432863 20.493818 15: seq: 17, analog_in_state oid=16 next_clock=1885440000 value=32759
Receive: 92 21.453851 21.453461 11: seq: 18, clock clock=1868035796
Receive: 93 21.672896 21.453461 15: seq: 18, analog_in_state oid=10 next_clock=1900800000 value=32760
Receive: 94 21.732892 21.453461 15: seq: 18, analog_in_state oid=16 next_clock=1904640000 value=32755
Receive: 95 21.972830 21.453461 15: seq: 18, analog_in_state oid=10 next_clock=1920000000 value=32746
Receive: 96 22.032814 21.453461 15: seq: 18, analog_in_state oid=16 next_clock=1923840000 value=32760
Receive: 97 22.265846 21.453461 15: seq: 18, stats count=479 sum=634087 sumsq=9409671
Receive: 98 22.273032 21.453461 12: seq: 18, shutdown clock=1920453348 static_string_id=ADC out of range
Transition to shutdown state: MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Dumping gcode input 0 blocks
Dumping 20 requests for client 281472850485056
Received 20.274159: b'{"id": 281473409950864, "method": "info", "params": {}}'
Received 20.529021: b'{"id": 281473384094400, "method": "info", "params": {}}'
Received 20.532879: b'{"id": 281473409950240, "method": "objects/subscribe", "params": {"objects": {"webhooks": null}, "response_template": {"method": "process_status_update"}}}'
Received 20.536582: b'{"id": 281473384094448, "method": "gcode/subscribe_output", "params": {"response_template": {"method": "process_gcode_response"}}}'
Received 20.540458: b'{"id": 281473409950240, "method": "list_endpoints", "params": {}}'
Received 20.545855: b'{"id": 281473383982848, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null}, "response_template": {"method": "process_status_update"}}}'
Received 20.787845: b'{"id": 281473409950864, "method": "objects/list", "params": {}}'
Received 20.791413: b'{"id": 281473383983952, "method": "register_remote_method", "params": {"response_template": {"method": "shutdown_machine"}, "remote_method": "shutdown_machine"}}'
Received 20.797178: b'{"id": 281473383983520, "method": "register_remote_method", "params": {"response_template": {"method": "reboot_machine"}, "remote_method": "reboot_machine"}}'
Received 20.800514: b'{"id": 281473384094400, "method": "register_remote_method", "params": {"response_template": {"method": "pause_job_queue"}, "remote_method": "pause_job_queue"}}'
Received 20.803660: b'{"id": 281473384094400, "method": "register_remote_method", "params": {"response_template": {"method": "start_job_queue"}, "remote_method": "start_job_queue"}}'
Received 20.811618: b'{"id": 281473383982944, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 20.811618: b'{"id": 281473383983376, "method": "objects/query", "params": {"objects": {"heaters": null}}}'
Received 21.036672: b'{"id": 281473383984144, "method": "info", "params": {}}'
Received 21.038880: b'{"id": 281473383981360, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 21.058726: b'{"id": 281473383982464, "method": "objects/query", "params": {"objects": {"configfile": null}}}'
Received 21.293307: b'{"id": 281473383985056, "method": "objects/subscribe", "params": {"objects": {"webhooks": null, "print_stats": null, "heater_bed": null, "extruder": null}, "response_template": {"method": "process_status_update"}}}'
Received 21.340272: b'{"id": 281473383981792, "method": "gcode/help", "params": {}}'
Received 21.396069: b'{"id": 281473383981408, "method": "objects/query", "params": {"objects": {"bed_mesh": null, "configfile": null, "display_status": null, "extruder": null, "fan": null, "gcode_move": null, "heater_bed": null, "idle_timeout": null, "pause_resume": null, "print_stats": null, "toolhead": null, "virtual_sdcard": null, "webhooks": null, "motion_report": null, "firmware_retraction": null, "exclude_object": null, "manual_probe": null}}}'
Received 21.546902: b'{"id": 281473383982560, "method": "objects/subscribe", "params": {"objects": {"bed_mesh": ["profile_name", "mesh_max", "mesh_min", "probed_matrix", "profiles"], "configfile": ["config"], "display_status": ["progress", "message"], "fan": ["speed"], "gcode_move": ["extrude_factor", "gcode_position", "homing_origin", "speed_factor", "speed"], "idle_timeout": ["state"], "pause_resume": ["is_paused"], "print_stats": null, "toolhead": ["homed_axes", "estimated_print_time", "print_time", "position", "extruder", "max_accel", "minimum_cruise_ratio", "max_velocity", "square_corner_velocity"], "virtual_sdcard": ["file_position", "is_active", "progress"], "webhooks": null, "firmware_retraction": ["retract_length", "retract_speed", "unretract_extra_length", "unretract_speed"], "motion_report": ["live_position", "live_velocity", "live_extruder_velocity"], "exclude_object": ["current_object", "objects", "excluded_objects"], "manual_probe": ["is_active"], "screws_tilt_adjust": ["results", "error"], "extruder": null, "heater_bed": null}, "response_template": {"method": "process_status_update"}}}'
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (21.500331718, 0.0, 0.0)
Stats 22.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000028 bytes_write=1121 bytes_read=4462 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000427 heater_bed: target=0 temp=-56.6 pwm=0.000 sysload=1.66 cputime=1.983 memavail=727416 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 23.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000028 bytes_write=1127 bytes_read=4583 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000187 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.66 cputime=1.995 memavail=727224 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-62.4 pwm=0.000
Stats 24.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000028 bytes_write=1133 bytes_read=4704 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000088 heater_bed: target=0 temp=-40.2 pwm=0.000 sysload=1.66 cputime=2.020 memavail=723236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 25.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000028 bytes_write=1139 bytes_read=4810 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000160 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=2.09 cputime=2.036 memavail=726436 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-52.4 pwm=0.000
Stats 26.5: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000028 bytes_write=1145 bytes_read=4931 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000059 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=2.09 cputime=2.048 memavail=728060 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 27.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1151 bytes_read=5066 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999987 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=2.09 cputime=2.060 memavail=728564 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 28.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1157 bytes_read=5172 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000005 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=2.09 cputime=2.074 memavail=729068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 29.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1163 bytes_read=5293 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000006 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=2.09 cputime=2.091 memavail=729020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 30.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1169 bytes_read=5414 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000003 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=1.92 cputime=2.109 memavail=730080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 31.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1175 bytes_read=5520 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999973 heater_bed: target=0 temp=-62.4 pwm=0.000 sysload=1.92 cputime=2.124 memavail=729100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-48.0 pwm=0.000
Stats 32.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1181 bytes_read=5655 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999993 heater_bed: target=0 temp=-51.0 pwm=0.000 sysload=1.92 cputime=2.138 memavail=726848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-65.6 pwm=0.000
Stats 33.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1187 bytes_read=5776 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999956 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.92 cputime=2.150 memavail=726976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 34.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1193 bytes_read=5882 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999937 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.92 cputime=2.161 memavail=726972 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-51.7 pwm=0.000
Stats 35.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1199 bytes_read=6003 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999944 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.77 cputime=2.176 memavail=726972 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 36.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1205 bytes_read=6124 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999944 heater_bed: target=0 temp=-56.6 pwm=0.000 sysload=1.77 cputime=2.193 memavail=728432 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-42.4 pwm=0.000
Stats 37.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1211 bytes_read=6244 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999972 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.77 cputime=2.210 memavail=728516 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 38.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1217 bytes_read=6365 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999958 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=1.77 cputime=2.225 memavail=721992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-43.7 pwm=0.000
Stats 39.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1223 bytes_read=6486 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999944 heater_bed: target=0 temp=-51.7 pwm=0.000 sysload=1.77 cputime=2.238 memavail=723768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-67.5 pwm=0.000
Stats 40.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1229 bytes_read=6592 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999928 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.63 cputime=2.249 memavail=724272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-69.8 pwm=0.000
Stats 41.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1235 bytes_read=6713 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999918 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.63 cputime=2.261 memavail=724276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 42.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1241 bytes_read=6834 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999917 heater_bed: target=0 temp=-59.8 pwm=0.000 sysload=1.63 cputime=2.275 memavail=724528 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 43.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1247 bytes_read=6954 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999916 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.63 cputime=2.292 memavail=725008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 44.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1253 bytes_read=7075 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999916 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.63 cputime=2.310 memavail=725068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 45.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1259 bytes_read=7196 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999905 heater_bed: target=0 temp=-44.5 pwm=0.000 sysload=1.82 cputime=2.325 memavail=724816 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 46.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1265 bytes_read=7302 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999896 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=1.82 cputime=2.338 memavail=726352 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 47.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1271 bytes_read=7423 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999890 heater_bed: target=0 temp=-69.8 pwm=0.000 sysload=1.82 cputime=2.349 memavail=726608 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-65.6 pwm=0.000
Stats 48.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1277 bytes_read=7558 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999885 heater_bed: target=0 temp=-56.6 pwm=0.000 sysload=1.82 cputime=2.361 memavail=726860 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 49.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1283 bytes_read=7664 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999885 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.82 cputime=2.378 memavail=726880 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 50.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1289 bytes_read=7785 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999880 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.75 cputime=2.394 memavail=727408 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 51.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1295 bytes_read=7906 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999875 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.75 cputime=2.406 memavail=726148 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 09:17:07 2024 (1713086227.9 12.1)
===== Config file =====
[stepper_x]
step_pin = PA14
dir_pin = !PA10
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC4
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PC8
dir_pin = !PA15
enable_pin = !PC14
microsteps = 16
rotation_distance = 40
endstop_pin = ^PB0
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PD2
dir_pin = PD4
enable_pin = !PD3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC6
position_endstop = 0
position_max = 270

[extruder]
step_pin = PD5
dir_pin = !PD6
enable_pin = !PB3
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB11
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA4
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PB2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA3
control = watermark
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_390054001950425938323120-if00
baud = 115200
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PC1, EXP1_3=PC3, EXP1_5=PC0, EXP1_7=PA2, EXP1_9=<GND>,
	EXP1_2=PC2,  EXP1_4=<RST>, EXP1_6=PA0, EXP1_8=PA1, EXP1_10=<5V>
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 106 commands (v0.12.0-125-gbfb71bc2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_i2c3_PC0_PC1=PC0,PC1 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 13.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1009 bytes_read=4213 bytes_retransmit=9 bytes_invalid=0 send_seq=115 receive_seq=115 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64002831 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=0.95 cputime=2.318 memavail=746576 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 14.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1015 bytes_read=4289 bytes_retransmit=9 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000467 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=0.95 cputime=2.328 memavail=731928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-61.0 pwm=0.000
MCU 'mcu' shutdown: ADC out of range
clocksync state: mcu_freq=64000000 last_clock=1436978798 clock_est=(13.422 1353633144 64000467.416) min_half_rtt=0.000164 min_rtt_time=13.573 time_avg=13.422(0.077) clock_avg=1353633144.599(4913970.392) pred_variance=2919086778.023
Dumping serial stats: bytes_write=1015 bytes_read=4331 bytes_retransmit=9 bytes_invalid=0 send_seq=116 receive_seq=116 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 13.063158 13.063158 8: seq: 10, identify offset=0 count=40
Sent 1 13.065544 13.065544 8: seq: 11, identify offset=40 count=40
Sent 2 13.067717 13.067717 8: seq: 12, identify offset=80 count=40
Sent 3 13.069832 13.069832 9: seq: 13, identify offset=120 count=40
Sent 4 13.072787 13.072787 9: seq: 14, identify offset=160 count=40
Sent 5 13.079795 13.079795 9: seq: 15, identify offset=200 count=40
Sent 6 13.081532 13.081532 9: seq: 16, identify offset=240 count=40
Sent 7 13.083229 13.083229 9: seq: 17, identify offset=280 count=40
Sent 8 13.085140 13.085140 9: seq: 18, identify offset=320 count=40
Sent 9 13.086917 13.086917 9: seq: 19, identify offset=360 count=40
Sent 10 13.096462 13.096462 9: seq: 1a, identify offset=400 count=40
Sent 11 13.103818 13.103818 9: seq: 1b, identify offset=440 count=40
Sent 12 13.108136 13.108136 9: seq: 1c, identify offset=480 count=40
Sent 13 13.112143 13.112143 9: seq: 1d, identify offset=520 count=40
Sent 14 13.113918 13.113918 9: seq: 1e, identify offset=560 count=40
Sent 15 13.117683 13.117683 9: seq: 1f, identify offset=600 count=40
Sent 16 13.122069 13.122069 9: seq: 10, identify offset=640 count=40
Sent 17 13.136345 13.136345 9: seq: 11, identify offset=680 count=40
Sent 18 13.138466 13.138466 9: seq: 12, identify offset=720 count=40
Sent 19 13.141952 13.141952 9: seq: 13, identify offset=760 count=40
Sent 20 13.145745 13.145745 9: seq: 14, identify offset=800 count=40
Sent 21 13.149247 13.149247 9: seq: 15, identify offset=840 count=40
Sent 22 13.151403 13.151403 9: seq: 16, identify offset=880 count=40
Sent 23 13.154608 13.154608 9: seq: 17, identify offset=920 count=40
Sent 24 13.156822 13.156822 9: seq: 18, identify offset=960 count=40
Sent 25 13.158857 13.158857 9: seq: 19, identify offset=1000 count=40
Sent 26 13.162304 13.162304 9: seq: 1a, identify offset=1040 count=40
Sent 27 13.164327 13.164327 9: seq: 1b, identify offset=1080 count=40
Sent 28 13.166200 13.166200 9: seq: 1c, identify offset=1120 count=40
Sent 29 13.168073 13.168073 9: seq: 1d, identify offset=1160 count=40
Sent 30 13.170100 13.170100 9: seq: 1e, identify offset=1200 count=40
Sent 31 13.171982 13.171982 9: seq: 1f, identify offset=1240 count=40
Sent 32 13.174032 13.174032 9: seq: 10, identify offset=1280 count=40
Sent 33 13.176075 13.176075 9: seq: 11, identify offset=1320 count=40
Sent 34 13.177735 13.177735 9: seq: 12, identify offset=1360 count=40
Sent 35 13.179462 13.179462 9: seq: 13, identify offset=1400 count=40
Sent 36 13.181497 13.181497 9: seq: 14, identify offset=1440 count=40
Sent 37 13.183570 13.183570 9: seq: 15, identify offset=1480 count=40
Sent 38 13.185637 13.185637 9: seq: 16, identify offset=1520 count=40
Sent 39 13.187687 13.187687 9: seq: 17, identify offset=1560 count=40
Sent 40 13.189664 13.189664 9: seq: 18, identify offset=1600 count=40
Sent 41 13.191488 13.191488 9: seq: 19, identify offset=1640 count=40
Sent 42 13.193555 13.193555 9: seq: 1a, identify offset=1680 count=40
Sent 43 13.195588 13.195588 9: seq: 1b, identify offset=1720 count=40
Sent 44 13.197766 13.197766 9: seq: 1c, identify offset=1760 count=40
Sent 45 13.199914 13.199914 9: seq: 1d, identify offset=1800 count=40
Sent 46 13.201787 13.201787 9: seq: 1e, identify offset=1840 count=40
Sent 47 13.207128 13.207128 9: seq: 1f, identify offset=1880 count=40
Sent 48 13.217220 13.217220 9: seq: 10, identify offset=1920 count=40
Sent 49 13.219417 13.219417 9: seq: 11, identify offset=1960 count=40
Sent 50 13.221365 13.221365 9: seq: 12, identify offset=2000 count=40
Sent 51 13.223205 13.223205 9: seq: 13, identify offset=2040 count=40
Sent 52 13.227885 13.227885 9: seq: 14, identify offset=2080 count=40
Sent 53 13.229836 13.229836 9: seq: 15, identify offset=2120 count=40
Sent 54 13.231931 13.231931 9: seq: 16, identify offset=2160 count=40
Sent 55 13.234010 13.234010 9: seq: 17, identify offset=2200 count=40
Sent 56 13.235970 13.235970 9: seq: 18, identify offset=2240 count=40
Sent 57 13.238014 13.238014 9: seq: 19, identify offset=2280 count=40
Sent 58 13.241081 13.241081 9: seq: 1a, identify offset=2320 count=40
Sent 59 13.242773 13.242773 9: seq: 1b, identify offset=2360 count=40
Sent 60 13.245701 13.245701 9: seq: 1c, identify offset=2400 count=40
Sent 61 13.247368 13.247368 9: seq: 1d, identify offset=2440 count=40
Sent 62 13.250503 13.250503 9: seq: 1e, identify offset=2480 count=40
Sent 63 13.254634 13.254634 9: seq: 1f, identify offset=2520 count=40
Sent 64 13.258403 13.258403 9: seq: 10, identify offset=2560 count=40
Sent 65 13.260545 13.260545 9: seq: 11, identify offset=2600 count=40
Sent 66 13.262505 13.262505 9: seq: 12, identify offset=2640 count=40
Sent 67 13.264711 13.264711 9: seq: 13, identify offset=2680 count=40
Sent 68 13.269222 13.269222 9: seq: 14, identify offset=2720 count=40
Sent 69 13.272870 13.272870 9: seq: 15, identify offset=2760 count=40
Sent 70 13.274592 13.274592 9: seq: 16, identify offset=2800 count=40
Sent 71 13.276700 13.276700 9: seq: 17, identify offset=2840 count=40
Sent 72 13.278704 13.278704 9: seq: 18, identify offset=2880 count=40
Sent 73 13.280759 13.280759 9: seq: 19, identify offset=2882 count=40
Sent 74 13.304979 13.304979 6: seq: 1a, get_uptime
Sent 75 13.361456 13.361456 6: seq: 1b, get_clock
Sent 76 13.415026 13.415026 6: seq: 1c, get_clock
Sent 77 13.467553 13.467553 6: seq: 1d, get_clock
Sent 78 13.520247 13.520247 6: seq: 1e, get_clock
Sent 79 13.572664 13.572664 6: seq: 1f, get_clock
Sent 80 13.625352 13.625352 6: seq: 10, get_clock
Sent 81 13.680149 13.680149 6: seq: 11, get_clock
Sent 82 13.732615 13.732615 6: seq: 12, get_clock
Sent 83 13.736619 13.736619 6: seq: 13, get_config
Sent 84 13.738428 13.738428 6: seq: 14, get_clock
Sent 85 13.779567 13.779567 7: seq: 15, allocate_oids count=19
Sent 86 13.780279 13.780279 8: seq: 16, config_analog_in oid=10 pin=PA3
Sent 87 13.783728 13.783728 64: seq: 17, config_digital_out oid=11 pin=PB2 value=0 default_value=0 max_duration=320000000, set_digital_out_pwm_cycle oid=11 cycle_ticks=6400000, config_digital_out oid=12 pin=PA8 value=0 default_value=0 max_duration=0, set_digital_out_pwm_cycle oid=12 cycle_ticks=640000, config_stepper oid=0 step_pin=PA14 dir_pin=PA10 invert_step=0 step_pulse_ticks=128, config_digital_out oid=13 pin=PA13 value=1 default_value=1 max_duration=0, config_endstop oid=1 pin=PC4 pull_up=1, config_trsync oid=2, config_stepper oid=3 step_pin=PC8 dir_pin=PA15 invert_step=0 step_pulse_ticks=128, config_digital_out oid=14 pin=PC14 value=1 default_value=1 max_duration=0
Sent 88 13.783728 13.783728 62: seq: 18, config_endstop oid=4 pin=PB0 pull_up=1, config_trsync oid=5, config_stepper oid=6 step_pin=PD2 dir_pin=PD4 invert_step=0 step_pulse_ticks=128, config_digital_out oid=15 pin=PD3 value=1 default_value=1 max_duration=0, config_endstop oid=7 pin=PC6 pull_up=1, config_trsync oid=8, config_analog_in oid=16 pin=PA4, config_digital_out oid=17 pin=PB11 value=0 default_value=0 max_duration=320000000, set_digital_out_pwm_cycle oid=17 cycle_ticks=6400000, config_stepper oid=9 step_pin=PD5 dir_pin=PD6 invert_step=0 step_pulse_ticks=128, config_digital_out oid=18 pin=PB3 value=1 default_value=1 max_duration=0
Sent 89 13.783728 13.783728 32: seq: 19, finalize_config crc=3587364166, query_analog_in oid=10 clock=1414400000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=12005 max_value=32303 range_check_count=4
Sent 90 13.784334 13.784334 13: seq: 1a, queue_digital_out oid=11 clock=1386765311 on_ticks=0
Sent 91 13.784948 13.784948 13: seq: 1b, queue_digital_out oid=12 clock=1386789853 on_ticks=0
Sent 92 13.785575 13.785575 26: seq: 1c, query_analog_in oid=16 clock=1418240000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=1503 max_value=32303 range_check_count=4
Sent 93 13.786002 13.786002 13: seq: 1d, queue_digital_out oid=17 clock=1387126514 on_ticks=0
Sent 94 13.786866 13.786866 6: seq: 1e, get_config
Sent 95 13.803938 13.803938 7: seq: 1f, stepper_get_position oid=0
Sent 96 13.807060 13.807060 7: seq: 10, stepper_get_position oid=3
Sent 97 13.808972 13.808972 7: seq: 11, stepper_get_position oid=6
Sent 98 13.811682 13.811682 7: seq: 12, stepper_get_position oid=9
Sent 99 14.724325 14.724325 6: seq: 13, get_clock
Dumping receive queue 98 messages
Receive: 0 13.063605 13.063158 48: seq: 11, identify_response offset=0 data=b'x\xda\x9dY\xfbo\xe36\x12\xfeWt\x06\x8ak\xafq`I\x96\x1f\x01\xfaC\x92f{E\x9bm\xbaN\xee\x0e(\nA\x96h['
Receive: 1 13.065985 13.065544 48: seq: 12, identify_response offset=40 data=b'XY\xd2\x8aR\x1eW\xec\xff~\xdfpH\x8a\x92\xbd-p\x01\x1c\xf31\x1c\x92\xc3y|3\xfec\x92\xd4\xf5\xe4j\xf2S\x91\xd7\xb5'
Receive: 2 13.068177 13.067717 48: seq: 13, identify_response offset=80 data=b'h&\x17\x93m\x97\x17Y\xfc,\x1a\x99W\xa5\xc4\xd4>M\xaf\xbc\xaf\xfd\xe8j5\rf\xfez\xfa)\x9c\xfa\xdfn\xfdo\xbc\xd5e'
Receive: 3 13.071197 13.069832 49: seq: 14, identify_response offset=120 data=b'x\xe9{46[\xceB\xef\xebF\x14"\x91\xe2\x1b\xef7,\x99\xae\xa6\xdb&)\xd3\x83\xd7\x88\xe7\x9cxy\xc12\x9c\x05\xcb\xdf\xbd'
Receive: 4 13.073325 13.072787 49: seq: 15, identify_response offset=160 data=b'm^vm^Hp\r.\xc3\xe82\x98\x06\xdf\xfa\xf3o\xb7\xc17\x1e\xf7q\x8a\xb4:\x1e\x932\xc3\xfe\x7fL\x92\xa2\xa8\xd2\xa4\x15'
Receive: 5 13.080218 13.079795 49: seq: 16, identify_response offset=200 data=b'q\x95g\xd2K\xab\xael\xbf\xfb*\x9d\\\xad\xe8\xb0m\x8bS\xc6I\xfa\xd1\xc3,\x86\x9d\xf9\xf9\xd2!\xc82CPWR}\xe5\xe5'
Receive: 6 13.081964 13.081532 49: seq: 17, identify_response offset=240 data=b'w_u^\xdd\x15E\xdc\xd5\xbc`\xdd/\xf8\xd4\x89\xe6\xcd\xf2\xc4\x01>\x12u#d\x1b\xb7y\xfaQr\xaf\xc5\x15\xe51oc\xb3'
Receive: 7 13.083634 13.083229 49: seq: 18, identify_response offset=280 data=b'\xab\x97\x97\x10\x9d\xde\x1f\x07L!\x92&\x96\x87\xae\xcd\xaa\x97rr\x15\xd0\xd5\xca]\xbe\xc7\x89^\x8bp\x1e\x99-d\x9d\xc7\xdc\x9c\\'
Receive: 8 13.085595 13.085140 49: seq: 19, identify_response offset=320 data=b'-g=U\x99\x14\xd5>\xceK{zu\xec\xc9U\xd8s\xd2G6\x14\xdc\x8d{9D=;5(\x9a!\xb3\x81\x0c\xa2\xa5%\xce'
Receive: 9 13.087340 13.086917 49: seq: 1a, identify_response offset=360 data=b'\xf2}\xde&E\\u\xedh\xc1sRt\x82\xfa\x99\xd8%]\xd1\xc6v\xe0\x98\xbc\xc6Y\xd7$-\x1e\\\x9d\xd3\xef\xf9\t\xbcg['
Receive: 10 13.096839 13.096462 49: seq: 1b, identify_response offset=400 data=b'\xd5\x03^\xe9`\xf3`a\x89\x0f\xd9|\xbe\\\xcd\x0cq#c\xbd\xb70\x8dln[\x91m-lki[\xa2H\xde\xec\xa3M\xae'
Receive: 11 13.104235 13.103818 49: seq: 1c, identify_response offset=440 data=b'\x16\xa1\xdd$\x0fR\xcf\x08}\xde\x0f\x17\xb9\x0c\xb2\x97\xb3/\xb3\xb6D\xc7\xba[\x07\x91= X\xf5T\xfd5JQ\xd5\xf9\xab(F'
Receive: 12 13.108594 13.108136 49: seq: 1d, identify_response offset=480 data=b'\x02\xcc\x926\x89e\xfe_\xc8\xec\xd0\xc1 \xda\x98\x04\xe7(\x96\x14\x18\xcaK\xe7\xd8Qd\x99\xd6/\xc73\x8f\x92\xbeA\xd9z\x1e\xfa'
Receive: 13 13.112586 13.112143 49: seq: 1e, identify_response offset=520 data=b'I\x0e\xdd\xf8\x910r\xf2J\xf3\xfe\xc4\xb8\xee\x981\xd9W\x9b?\x8b\xf8\x90\xef\x0f\xea\x86\xe1\xca\xa5\x87\x96\xee\x0bq*/\xcf\xce\xc5'
Receive: 14 13.114379 13.113918 49: seq: 1f, identify_response offset=560 data=b'\xed[-X6\xe1`\xa5\xb1\x8cs\x8b\xf5T|\x94\xfb\xef\xbe\xfa\x07\\A8\\\xfb\x92\xb7\x07\x88!N\xa5}\xc4\xb0\xd76\xd9.'
Receive: 15 13.118123 13.117683 49: seq: 10, identify_response offset=600 data=b"\xd7\x81}\x9e\xd4\xea\x8fL\x8b\x8f\xb6\x9dg\xb6\xf9V\xa6\xf1PU\xbc\xf4\x98\xc5'\xda3sv\x10\xe43\xed\xd1\xd1\x8d\xb5Rgy"
Receive: 16 13.122465 13.122069 49: seq: 11, identify_response offset=640 data=b'c\x9a\xec\x10\x14qO\xd5\x15R8L\x83\xfeb\xedA4\xc7\nvZ\x9f\x95\xa8;\xdd\x0bu\xd1_\xbb=\xa6]\xd2X\xddh^'
Receive: 17 13.136801 13.136345 49: seq: 12, identify_response offset=680 data=b'\xe3\x13#\xf7Z;H\x9a\xd7\xe6G\xc1\x1a\xd6\xbb\x94\xb6!y\xf4b\xc5\xa53\xb1\xed\xa0\xcf\x15\xa2\xc5\xda\xf4\xc0e\xaft\x99\xdf\xc7'
Receive: 18 13.138842 13.138466 49: seq: 13, identify_response offset=720 data=b'\xb7d\x8dH\xe0o\x9bL4\xb4\x1f\x9co\xc3\xce 0\x04/M\xde\x8a\x13\nRZ&\xf4/&\xe2(\x9a\xbd(\xd3\xb7\x98\xbc\x06'
Receive: 19 13.142359 13.141952 49: seq: 14, identify_response offset=760 data=b'\x0e\x81!\xf6 \xf1\xa1:\x8a\x13\xdf,\x93c\xed\x1a\x80\xee[\xcf<\xf4\xdd8z\xef\xb5\xf8\xbaV\xc6M\xbe\xdf\x8b\x86.!\xc9>'
Receive: 20 13.146228 13.145745 49: seq: 15, identify_response offset=800 data=b'\xc81E\xfd\xe6*2\xe0LI+\xac\x80\x82\xf9\xc5d\x97\xc3W\xc3\xa4c\x96\xa1\x976)k\xcc\xc5d\x0fkV\xe7\x84\x90uO'
Receive: 21 13.149652 13.149247 49: seq: 16, identify_response offset=840 data=b'\xd1\xc0\x1c\xb8\xdb\xd5\xf4\n\xb0\xc3\x8b\x89v|\xb1\xc4~14\xd0\xfauj\xb3\x9c\x17\xc1\x88\x8c\x9e\xc0\x90\xf5\xcf\xb1\x80\x10\xc9-\x1d'
Receive: 22 13.151843 13.151403 49: seq: 17, identify_response offset=880 data=b'\xab,\xdf\xbd\xc5xk\xcb\xab\x11\xca\xa4<\x1d\x9ep\x02\x9a\xd5V\xb6\xe6e\xfc\x86Cz\x1a\x8b\x0b\xa1\x9d\xc6\x8c\t\xd5\xf2N\xba\x9e'
Receive: 23 13.155041 13.154608 49: seq: 18, identify_response offset=920 data=b'\x10]\xe5\xc7 #\xfa\xa6\xe7\x15\x92u}\x1e\xf4\xabd\xb5k_\x92F\xb8\xcba\x9f\xd6&\xb3\xc44\xcfqZD\xccI\xeb\xd2\xf8'
Receive: 24 13.157229 13.156822 49: seq: 19, identify_response offset=960 data=b'\xfas\xba~&\xca\x16\x97\xf7\xaa\xdd\x0e\x1b*\xa3\xb6q\x11\xf3\xc6=+1\xda\xd7\x8cBg\xa6\xab\xb3\xfe\xa5\x19<\x1c:g\x9b\x08'
Receive: 25 13.159295 13.158857 49: seq: 1a, identify_response offset=1000 data=b'o\xc6*1\x8a\xe8\x03}\xc3i\xd7#:\xa5B]\xef\xbb\x16+K0\x0e\xfa\xff\xa7\x8e\x1f{\x1d\xd7N\xbf\xef\x01\xb8\xec\xb1\xf0 '
Receive: 26 13.162749 13.162304 49: seq: 1b, identify_response offset=1040 data=b"\xd2\x8f\x0eT\x08}s\x86\x11R\xb0'\xa8+\xb8\x91\xf1\xfeN\x94Z\x18\x06\xc3 :\x12\xc6r5$\x1b\xcbb\xb94\xf3\xa30;"
Receive: 27 13.164700 13.164327 49: seq: 1c, identify_response offset=1080 data=b'\xe6\x13\x8d\xe8N\x18\xd9\xd79\x89S_\x00ud\x88\x08K\xf9\x8e%\xb2\x0c\x0c\x83s\x9e\xf9\x0b<\x1c\xc1\x0f\xe4\xce\x1dD\x048\x8a'
Receive: 28 13.166636 13.166200 49: seq: 1d, identify_response offset=1120 data=b'\xcc\x11\xfb\x82\xa5\xd6\x89s\x98\xcb\xeeQ\xb9p\xc0\x8f\xcc\x92\x11\x1a\xb0\xe4\xf6\xada\n\x96\x98\xc2\x8f5Tz`\xf6\xb8\xc6*\x0e\xca'
Receive: 29 13.168488 13.168073 49: seq: 1e, identify_response offset=1160 data=b'\xc2\xf0\x9d\xc3\xa7\xe1\xe6\n\x88\x00i\xcftS\xadgW6\xde\x0f\x0b@E4\xee\x1dF\x80\x11\xe7\x0eO\x88\xd4\r\x14z\xb1<\x07'
Receive: 30 13.170472 13.170100 49: seq: 1f, identify_response offset=1200 data=b'P\x06\x8b\x16\xbc\xa8\x14\xaf\xfa\x08\x08\xb0\xd6\xe2\xf3\x86}\xb0\xcfDF\x1e\x7f\x01\x8b \x15\xe8\x86\x83P\x08\xca\xefz\x8d\xef-|\xe9'
Receive: 31 13.172459 13.171982 49: seq: 10, identify_response offset=1240 data=b'3\x9d\xe3#\x9c\xd9pnf\x07^\x90\x86\xb4\x17\x84\xff\x15\x8e\x0f\xc3\x92E\xbf\xe4\x9c\x0b<\xe6\xb22\x8e\xefX\xc9\xfc\x1ct9a'
Receive: 32 13.174467 13.174032 49: seq: 11, identify_response offset=1280 data=b"\xba\xd0\xe7\xf8\xf2=Bh\x01\xa3\xa2?\x0b.\xd1zHu>\xb6D+\xa2R\xf8'\xa6\x00\x06\xbf\x98\x13\x9a\xb4\x86\xe7\xaf{\x02\x15"
Receive: 33 13.176434 13.176075 49: seq: 12, identify_response offset=1320 data=b'6I{9\xb0z6\xce:Q\x17+\xc0R\xa3\x97\x81\xa8\x95{\xb7\xd1\x87\x1d4^D\xaf&\x19\x92\xc9\x9e\xb1\x00\xa8\xc4\xaa\xa7k'
Receive: 34 13.178125 13.177735 49: seq: 13, identify_response offset=1360 data=b']T$\xea\xaa\xd1!\x99\xadW\xf5\xad\x92\x88\xd7:\xc7\x93\xb8\x00`m9\x8dn\xe1\x12\xc1kq\xb88g\xc7\x8e\r\xcc?\x1b\xa4'
Receive: 35 13.179846 13.179462 49: seq: 14, identify_response offset=1400 data=b'E\xf9\xed\xf5\xf7\xb7\xf1\xfd\xf5\x7f(\xa0\xae\xf1D7O\x9b\xf8\xe1\xc7\xf7\x1b\xcaN\xfc\xf8\xe1z\x8d\x8f?C"\x8e\xe6\x85j\x9e\xd0'
Receive: 36 13.181965 13.181497 49: seq: 15, identify_response offset=1440 data=b'\xdc,\xf0Y\x12\xc9\xcd\xe2\x82Z\xa7\x14+|\xd6\x8abuA\xad!E\x80Y\x7fF\xff|E\x03$\xa7\xdag\xa8B\xfa7g\xaa'
Receive: 37 13.183965 13.183570 49: seq: 16, identify_response offset=1480 data=b"\xf0B\xb5\x87TD@\x1f\xa6!\x923\x14\xb7\xd8\xecV\xedu\x8b\xadn\x07;A\x8b\xd5\xcc5\xeer\xbd\xc4'\x1a\xcf&\x8a\xf5\x1c"
Receive: 38 13.186103 13.185637 49: seq: 17, identify_response offset=1520 data=b'\xac#|\xc2\xd1t\xc0\x87\xa3i\x9f\xe6\xfd\x13\x02\xb5\xfe6\xc0\xc6\xea\x06\xb3\xd1|x\xc2\xfe\xf6\xe7_n\x7f\x8a\xdf}\xb8\xfb\x95\x0c'
Receive: 39 13.188122 13.187687 49: seq: 18, identify_response offset=1560 data=b'm\xa6\xfe.&\xf7\xb7O\xa0\x94\xed1\x0c\xf6\xb3\xad\xff\xfa\n\xca\x87\x7f\xdf\xf3c\x06\x94\xb0}\xb8\xdb\xdc}\xf8\xd7\x1ds~\xda\xdc'
Receive: 40 13.190080 13.189664 49: seq: 19, identify_response offset=1600 data=b'\xa8k\x01\xdc\xe2\x1fU9\x06\xd3i\xf3\x06%-\x88\xe4\x1dd\xf2\x8ed\xb2y\xbc~\xdc\xc4\x9b\xa7\xfb\xcd\xaf\xf1\xcd\xf5\xe6\x8e\xd8.'
Receive: 41 13.191978 13.191488 49: seq: 1a, identify_response offset=1640 data=b'h\xf8\xee\xe1\xe1\xeeC|\xf3\xcb\xe3?\xe3\xbb\xef\x7f\xc0\xb8\xff\x99\x10j\x07\xcc\xac\xb2:U8\xd1HL7]]b\x0c\xe6h\xce'
Receive: 42 13.194006 13.193555 49: seq: 1b, identify_response offset=1680 data=b'\xcc\x0ehEa\xec8\xd0\x8b\xb0\x1f2J0WC\xce\x8bGf\xc0<\xf0\x02\xe7\x82\xcb2z\xfexw\x8f\x83_?>}Pw'
Receive: 43 13.195979 13.195588 49: seq: 1c, identify_response offset=1720 data=b'\xc1\xfa\x87k\x9c\xe7\xb7\xd9\x85\xbf\xf8\x1d\x9d\x1b\xea\xc0\xdds\xef\x96za\xa0{\xdfSo\xbe\xd2\xbd;\xea\xc1\xe9q\xef\x1d\xf5V\x8a'
Receive: 44 13.198199 13.197766 49: seq: 1d, identify_response offset=1760 data=b'\xcb\xe7\x81WG\x8a\xa4jH~\x18\x86\xea\x9a\x89\x8cf\xf3e\xa6n\xd8\x16"\x9a\xf9\xc1\x16G\xd1\xab\xb4\xb8X\x05\xd9\xef\x93\xb6\x05'
Receive: 45 13.200333 13.199914 49: seq: 1e, identify_response offset=1800 data=b'\xaa\x15(\x06Z\x81B\xd5\x02O2fB\x1d99\x99\x06\x19Q\x9cg\xfa\xba\x9e2\xff\x1d\x83-.o\\\x17\xe4\xc5\xde<\x93-'
Receive: 46 13.202216 13.201787 49: seq: 1f, identify_response offset=1840 data=b'd\x1c\x12o\x93\xd2+\xab\xd6\x83;\xf3($x\x88b\x1c\xba<\xe5\x95\xbc\x97C\x8e6{\x17\xe9\xd5\xf0\x8f\xd8\x89c.\xd6\xfe\xbd'
Receive: 47 13.207621 13.207128 49: seq: 10, identify_response offset=1880 data=b'\xa5\xb8\x8d|v\x0f\xaeH\x12\x93\xd6\xcb\xa5\x97\xe8\xbd8{\xe7,F\x13K"%\xcf\xc4\xb9\x16\x8f\xaa\x10\xaf\x00\x10\xb6\x13\xa5g\x12'
Receive: 48 13.217712 13.217220 49: seq: 11, identify_response offset=1920 data=b"\\\xbb\x1eb\xb8\xe5\xc2\x9cW'\x8d\xc4\x94h\x9a\xaaQi\x8c\x99h\x04\x90\x86lUy\xeeGF:\x1e\x8c\xc2K\x0fIY\x8a\x82"
Receive: 49 13.219868 13.219417 49: seq: 12, identify_response offset=1960 data=b'\xablf\xc2\x94\xae\xfaJ\x1a#\x11F\xa2\x86J\x17\x03\x95v\xf5c \xa3S$G\x01\x18\xc39\xb4\x99<V\xcf\xc2\x1c\xc4\xa32'
Receive: 50 13.221773 13.221365 49: seq: 13, identify_response offset=2000 data=b'\x0b\xf9\xdc~\xda\x16el\x19\x86c\xf2\xc9\xbc\xc6\xfev\xff\xd09\x00d\xe7\xb1vQVkF\xa9z\xa2th\xbe\x1a\x0e\x1awO'
Receive: 51 13.223645 13.223205 49: seq: 14, identify_response offset=2040 data=b'1\xc2\x19\xd7\x904=\xe4\xb5\xe66w.>\x80\x9c\x0e\r\xa5h\xf7\xc9+\xa9\xd6\xca\xc8\x90\xcb#\xf7H\x8e\x92\xbd\xf0\x907\x03 '
Receive: 52 13.228323 13.227885 49: seq: 15, identify_response offset=2080 data=b'\x98\xe7\xc1\xdd\xees)\x05\xb6\x04\xe2\xcf\xba\x82\xf2v,&<\xe5\xe9P\xa5tU<\x0b\x12>A\xa9//8$M\xa6\xf4SS'
Receive: 53 13.230293 13.229836 49: seq: 16, identify_response offset=2120 data=b'Su\xe0\x9e$\xae \xa6\x87V\xb3+\xaa\x17\xc6\xa8\xef\xa1\xd4\x89\xc7\xd7!\x8bP\xbe`>\x9a \xfdP\x13\x14\xd8\xdd\x89\xbc\xac\x19'
Receive: 54 13.232355 13.231931 49: seq: 17, identify_response offset=2160 data=b"\xc9q\xde\xa8\xa6J:i?\x1c*\x9fku\xbdn\xaa=t\xe2\x88\xa3't\xb7\x1d\xa0\x10N\tY\x0b\xb25\xaa\x85~\x10\xfaR"
Receive: 55 13.234408 13.234010 49: seq: 18, identify_response offset=2200 data=b"\xa0!eo\xb0\r\x89\x1a\xdaDzK\xb0pc\tN\xa4\xe3\xbd\xe4E\x01\x84\x90\x82\xdf\xa0\x90\xc6\x98\xa7_i%\xf4'+\x08V"
Receive: 56 13.236524 13.235970 49: seq: 19, identify_response offset=2240 data=b'l`s\xfc\x86\xea\x00D\x91\x1f\xbb\xa3\x193\xf6\x80\xeboL\xb1L\xa5\xed`\xa6\xacT\xb9\r\xb7\xc0\xbc\xd1f\xdbV\x95\xb7K\xd4'
Receive: 57 13.238438 13.238014 49: seq: 1a, identify_response offset=2280 data=b'\xed\xf8fT\xa5xtU\x8aD\x06BU\x1e\xe4\xa2\xde\xa3\x92\x07\xad\x048\x92B\xb9\xb9\xa7Rv5\x01$\xecH\x15S\xd6o\xe8'
Receive: 58 13.241461 13.241081 49: seq: 1b, identify_response offset=2320 data=b'\xb1*\xcc#\x87\xec\xca\x8f\xe0\x01\xff\x94q\xbd\xd7\x19\x97\xfd\x04\x94\x90\x95\x1d\xe0NV\x8d\xb2O\xa0,\xe9\xa5R?e_ZcO'
Receive: 59 13.243249 13.242773 49: seq: 1c, identify_response offset=2360 data=b'T\x95\x05\x9c\xd73\x18$\xdb\xc2\xf8${S.Sx\x1a\xfcq\rsT\xee\xb8\xf2~\x81WDT\xdc\x12^\xdbQ\xb9K\xfe\x8d'
Receive: 60 13.246094 13.245701 49: seq: 1d, identify_response offset=2400 data=b'a\xa1\xfa-\xc1:H\xfd\x0bC\xc65,IE\x03\xf8*\xad\x1d)\xa6i\x8a\x006\\\xb3\xaa\x1a\xbf\xbf\xbe\xfd\x89\xcb\x8d\xa6\xe0\xa6'
Receive: 61 13.247845 13.247368 49: seq: 1e, identify_response offset=2440 data=b'p2\t\xaeH\x1ar\xf6\x94\x17\x9c\x01\x83\xf4Z\xac\xdbT\xbe\xd4\xae\x95-\x87 0b\xc9I\x89\x8f\x82\t E\xe8\xaf\xa2HE'
Receive: 62 13.250919 13.250503 49: seq: 1f, identify_response offset=2480 data=b" \xddY\xa8\x08\xc5\x9dE\xa4\x9e\x1e\x9d\xc5b\x89v\xf8\x19\x9c\x8a<\x85\xa8\xb1~\xf2\xc3\xfb'\xef\x87\x87\x9f\x9f\t\xcb@\xb65\xfc"
Receive: 63 13.255042 13.254634 49: seq: 10, identify_response offset=2520 data=b'\x85\xe0\xdfVL\xa9aP\xd0Rv\x1e\x9f\xcb$\xd7a\xff\x13\xc9`E\xe2\xd4\x11<5\xc3\x89\xc2T\xfdP\xa1\x12\xc6\x1e\x97\xafl'
Receive: 64 13.258845 13.258403 49: seq: 11, identify_response offset=2560 data=b'\xb9\x19aJ\xd7\xc2\x14rW%3\x1a3\xcf\xac\xd2!x\x94\xd8&\xa8X\xad\xaa\x9d\xaa<\xf1g\xa7\xd6+t#\xeew\x9f\x06\xeb'
Receive: 65 13.260992 13.260545 49: seq: 12, identify_response offset=2600 data=b'\xbeN)\xa1\xfa\xb6\xec\xb8Z\xf7e\xbe\x01\xe7C\x85\x94~\x7f\xba\x87[E\x84p\xfc\xber\x16\x1b1;\x95\x0b\xd5g\xb1\x10\xd07'
Receive: 66 13.262921 13.262505 49: seq: 13, identify_response offset=2640 data=b'\xc5)\x87\xd4V\xa98\xd3\xba$R\x82f\xbd@\xbc1\xd4\xd02\t\x9c\x92\x95\xbe\x95\xc9D\xbb4U%\xb3\x94^\x03\xdc\xb0\x97['
Receive: 67 13.265247 13.264711 49: seq: 14, identify_response offset=2680 data=b'\xb5]\xad\x94\xc6\xc3$\x81~\x90`\xba\t\x9f\xa4\x18Z\xa6bT\xf3\x9a\x12\x92p\xd7\x0c\xaa.}\tB\x17NLZ\xc5\xe9\xbb\xcb'
Receive: 68 13.271291 13.269222 49: seq: 15, identify_response offset=2720 data=b'r\xdb)\xff\x9cqe\t\xa0\x04v\x1e\x9b\x00"\xf9jS\x82M\xb2w}\xa6\x14v^\x0e\xe1\xb9\x9c\xfe\xe41\xdc\xba\x8d\xf3*S'
Receive: 69 13.273306 13.272870 49: seq: 16, identify_response offset=2760 data=b'\x8a\xcen\x12\xfdW\xaf8W\xd0\xafi\x15\x16[\xf9\x0c\x04e\xafz\xb2;\xea/\xf9\x895l\xde\xa7\xc5\xa3\x9c\x99k\x8b9\xb8\xce'
Receive: 70 13.274980 13.274592 49: seq: 17, identify_response offset=2800 data=b"FN`\xf8\x9egm\xb3c'\xce\x8f\x1c8\x99\xf4\xe9\x05(\x87f\xcb\xf4\xdd\xec\xb8W\xf64\xb1\xa9\xfa\xd9r\xb8c\xc8\xeb\x80\x9c"
Receive: 71 13.277105 13.276700 49: seq: 18, identify_response offset=2840 data=b'\x9cB\x8c\xfc\xdbP\xe7Zy\x04\x1f\xa4\x7fH\x86\x0fz\x9e]\xfa\xc1\xe5l\xea\x07\xd1t\xbf\xddm\x97\xfe6\r&\x9f\xff\x071\xa2'
Receive: 72 13.279117 13.278704 11: seq: 19, identify_response offset=2880 data=b'\x13\xa0'
Receive: 73 13.281169 13.280759 9: seq: 1a, identify_response offset=2882 data=b''
Receive: 74 13.305419 13.304979 12: seq: 1b, uptime high=0 clock=1346140789
Receive: 75 13.361939 13.361456 11: seq: 1c, clock clock=1349756047
Receive: 76 13.415427 13.415026 11: seq: 1d, clock clock=1353184872
Receive: 77 13.467990 13.467553 11: seq: 1e, clock clock=1356546020
Receive: 78 13.520651 13.520247 11: seq: 1f, clock clock=1359919087
Receive: 79 13.572992 13.572664 11: seq: 10, clock clock=1363273351
Receive: 80 13.625760 13.625352 11: seq: 11, clock clock=1366644656
Receive: 81 13.680574 13.680149 11: seq: 12, clock clock=1370152126
Receive: 82 13.733008 13.732615 11: seq: 13, clock clock=1373509955
Receive: 83 13.737025 13.736619 10: seq: 14, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 84 13.738912 13.738428 11: seq: 15, clock clock=1373884168
Receive: 85 13.787349 13.786866 15: seq: 1f, config is_config=1 crc=3587364166 is_shutdown=0 move_count=1024
Receive: 86 13.804567 13.803938 8: seq: 10, stepper_position oid=0 pos=0
Receive: 87 13.807397 13.807060 8: seq: 11, stepper_position oid=3 pos=0
Receive: 88 13.809413 13.808972 8: seq: 12, stepper_position oid=6 pos=0
Receive: 89 13.812128 13.811682 8: seq: 13, stepper_position oid=9 pos=0
Receive: 90 14.384125 13.811682 15: seq: 13, analog_in_state oid=10 next_clock=1433600000 value=32723
Receive: 91 14.439307 13.811682 15: seq: 13, analog_in_state oid=16 next_clock=1437440000 value=32689
Receive: 92 14.679050 13.811682 15: seq: 13, analog_in_state oid=10 next_clock=1452800000 value=32754
Receive: 93 14.724728 14.724325 11: seq: 14, clock clock=1436978798
Receive: 94 14.739061 14.724325 15: seq: 14, analog_in_state oid=16 next_clock=1456640000 value=32750
Receive: 95 14.979017 14.724325 15: seq: 14, analog_in_state oid=10 next_clock=1472000000 value=32727
Receive: 96 15.039030 14.724325 15: seq: 14, analog_in_state oid=16 next_clock=1475840000 value=32738
Receive: 97 15.279266 14.724325 12: seq: 14, shutdown clock=1472453348 static_string_id=ADC out of range
Transition to shutdown state: MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Dumping gcode input 0 blocks
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (13.30529838, 0.0, 0.0)
Stats 15.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1021 bytes_read=4377 bytes_retransmit=9 bytes_invalid=0 send_seq=117 receive_seq=117 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000239 heater_bed: target=0 temp=-35.5 pwm=0.000 sysload=1.11 cputime=2.386 memavail=719344 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-37.1 pwm=0.000
Stats 16.8: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1027 bytes_read=4498 bytes_retransmit=9 bytes_invalid=0 send_seq=118 receive_seq=118 retransmit_seq=2 srtt=0.001 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64001232 heater_bed: target=0 temp=-39.9 pwm=0.000 sysload=1.11 cputime=2.395 memavail=722828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-51.0 pwm=0.000
webhooks client 281473512064864: New connection
webhooks client 281473512064864: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Stats 17.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000031 bytes_write=1033 bytes_read=4634 bytes_retransmit=9 bytes_invalid=0 send_seq=119 receive_seq=119 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000345 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.11 cputime=2.412 memavail=721468 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 18.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000031 bytes_write=1039 bytes_read=4740 bytes_retransmit=9 bytes_invalid=0 send_seq=120 receive_seq=120 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000034 heater_bed: target=0 temp=-43.7 pwm=0.000 sysload=1.11 cputime=2.420 memavail=710908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-51.7 pwm=0.000
Stats 19.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000031 bytes_write=1045 bytes_read=4861 bytes_retransmit=9 bytes_invalid=0 send_seq=121 receive_seq=121 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999885 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.11 cputime=2.430 memavail=713088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-44.1 pwm=0.000
Stats 20.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000031 bytes_write=1051 bytes_read=4982 bytes_retransmit=9 bytes_invalid=0 send_seq=122 receive_seq=122 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999819 heater_bed: target=0 temp=-69.8 pwm=0.000 sysload=1.18 cputime=2.438 memavail=708352 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 21.8: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000021 mcu_task_stddev=0.000031 bytes_write=1057 bytes_read=5088 bytes_retransmit=9 bytes_invalid=0 send_seq=123 receive_seq=123 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999818 heater_bed: target=0 temp=-65.6 pwm=0.000 sysload=1.18 cputime=2.447 memavail=724116 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000
Stats 22.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1063 bytes_read=5223 bytes_retransmit=9 bytes_invalid=0 send_seq=124 receive_seq=124 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999815 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=1.18 cputime=2.458 memavail=724116 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 23.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1069 bytes_read=5344 bytes_retransmit=9 bytes_invalid=0 send_seq=125 receive_seq=125 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999787 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.18 cputime=2.468 memavail=724620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 24.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1075 bytes_read=5450 bytes_retransmit=9 bytes_invalid=0 send_seq=126 receive_seq=126 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999774 heater_bed: target=0 temp=-61.0 pwm=0.000 sysload=1.18 cputime=2.475 memavail=724568 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-69.8 pwm=0.000
Stats 25.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1081 bytes_read=5586 bytes_retransmit=9 bytes_invalid=0 send_seq=127 receive_seq=127 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999789 heater_bed: target=0 temp=-55.6 pwm=0.000 sysload=1.17 cputime=2.485 memavail=723620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-57.6 pwm=0.000
Stats 26.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1087 bytes_read=5692 bytes_retransmit=9 bytes_invalid=0 send_seq=128 receive_seq=128 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999775 heater_bed: target=0 temp=-49.1 pwm=0.000 sysload=1.17 cputime=2.505 memavail=723032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 27.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1093 bytes_read=5812 bytes_retransmit=9 bytes_invalid=0 send_seq=129 receive_seq=129 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999765 heater_bed: target=0 temp=-48.0 pwm=0.000 sysload=1.17 cputime=2.516 memavail=723544 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 28.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1099 bytes_read=5948 bytes_retransmit=9 bytes_invalid=0 send_seq=130 receive_seq=130 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999761 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=1.17 cputime=2.529 memavail=723520 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 29.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1105 bytes_read=6054 bytes_retransmit=9 bytes_invalid=0 send_seq=131 receive_seq=131 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999769 heater_bed: target=0 temp=-53.9 pwm=0.000 sysload=1.17 cputime=2.541 memavail=723328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-67.5 pwm=0.000
Stats 30.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1111 bytes_read=6160 bytes_retransmit=9 bytes_invalid=0 send_seq=132 receive_seq=132 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999779 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=1.08 cputime=2.558 memavail=723528 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-67.5 pwm=0.000
Stats 31.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1117 bytes_read=6296 bytes_retransmit=9 bytes_invalid=0 send_seq=133 receive_seq=133 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999792 heater_bed: target=0 temp=-49.7 pwm=0.000 sysload=1.08 cputime=2.576 memavail=723332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-48.5 pwm=0.000
Stats 32.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1123 bytes_read=6416 bytes_retransmit=9 bytes_invalid=0 send_seq=134 receive_seq=134 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999793 heater_bed: target=0 temp=-38.9 pwm=0.000 sysload=1.08 cputime=2.589 memavail=723332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-69.8 pwm=0.000
Stats 33.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1129 bytes_read=6522 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999789 heater_bed: target=0 temp=-52.4 pwm=0.000 sysload=1.08 cputime=2.602 memavail=725332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 34.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1135 bytes_read=6658 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999782 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.08 cputime=2.614 memavail=725360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.7 pwm=0.000
Stats 35.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1141 bytes_read=6764 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999781 heater_bed: target=0 temp=-69.8 pwm=0.000 sysload=0.99 cputime=2.625 memavail=725364 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 36.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1147 bytes_read=6870 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999791 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=0.99 cputime=2.641 memavail=726580 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-61.0 pwm=0.000
Stats 37.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1153 bytes_read=7020 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999802 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=0.99 cputime=2.659 memavail=727156 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 38.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1159 bytes_read=7126 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999811 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=0.99 cputime=2.675 memavail=727660 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 39.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1165 bytes_read=7232 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999811 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=0.99 cputime=2.689 memavail=725904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 40.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1171 bytes_read=7368 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999810 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=0.99 cputime=2.702 memavail=726160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 41.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1177 bytes_read=7474 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999809 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=0.99 cputime=2.713 memavail=726864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 42.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1183 bytes_read=7594 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999805 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=0.99 cputime=2.725 memavail=726916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-69.8 pwm=0.000
Stats 43.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1189 bytes_read=7730 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999810 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=0.99 cputime=2.742 memavail=726676 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 44.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1195 bytes_read=7836 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999816 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=0.99 cputime=2.760 memavail=726960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-58.6 pwm=0.000
Stats 45.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1201 bytes_read=7942 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999821 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=0.91 cputime=2.775 memavail=724944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-42.4 pwm=0.000
Stats 46.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1207 bytes_read=8078 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999821 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=0.91 cputime=2.789 memavail=726360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 47.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1213 bytes_read=8184 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999819 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=0.91 cputime=2.800 memavail=726864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-53.1 pwm=0.000
Stats 48.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1219 bytes_read=8304 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999819 heater_bed: target=0 temp=-59.8 pwm=0.000 sysload=0.91 cputime=2.811 memavail=726560 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000
Stats 49.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1225 bytes_read=8440 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999817 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=0.91 cputime=2.825 memavail=726872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 50.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1231 bytes_read=8546 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999820 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=0.84 cputime=2.841 memavail=727148 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-49.7 pwm=0.000
Stats 51.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1237 bytes_read=8652 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999819 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=0.84 cputime=2.852 memavail=727152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-53.1 pwm=0.000
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 09:17:07 2024 (1713086227.9 12.1)
===== Config file =====
[stepper_x]
step_pin = PA14
dir_pin = !PA10
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC4
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PC8
dir_pin = !PA15
enable_pin = !PC14
microsteps = 16
rotation_distance = 40
endstop_pin = ^PB0
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PD2
dir_pin = PD4
enable_pin = !PD3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC6
position_endstop = 0
position_max = 270

[extruder]
step_pin = PD5
dir_pin = !PD6
enable_pin = !PB3
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB11
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA4
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PB2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA3
control = watermark
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_390054001950425938323120-if00
baud = 115200
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PC1, EXP1_3=PC3, EXP1_5=PC0, EXP1_7=PA2, EXP1_9=<GND>,
	EXP1_2=PC2,  EXP1_4=<RST>, EXP1_6=PA0, EXP1_8=PA1, EXP1_10=<5V>
=======================
Extruder max_extrude_ratio=0.266081
mcu 'mcu': Starting serial connect
Loaded MCU 'mcu' 106 commands (v0.12.0-125-gbfb71bc2 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.35.2-2+14+b2) 2.35.2)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1_PA9_PA10=PA9,PA10 BUS_PINS_i2c1_PB6_PB7=PB6,PB7 BUS_PINS_i2c1_PB8_PB9=PB8,PB9 BUS_PINS_i2c2_PB10_PB11=PB10,PB11 BUS_PINS_i2c2_PB13_PB14=PB13,PB14 BUS_PINS_i2c3_PB3_PB4=PB3,PB4 BUS_PINS_i2c3_PC0_PC1=PC0,PC1 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi2a=PC2,PC3,PB10 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=64000000 MCU=stm32g0b1xx PWM_MAX=255 RESERVE_PINS_USB=PA11,PA12 RESERVE_PINS_crystal=PF0,PF1 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 14.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1109 bytes_read=4313 bytes_retransmit=9 bytes_invalid=0 send_seq=135 receive_seq=135 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64001617 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.03 cputime=2.376 memavail=745368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 15.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1115 bytes_read=4329 bytes_retransmit=9 bytes_invalid=0 send_seq=136 receive_seq=136 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000249 heater_bed: target=0 temp=0.0 pwm=0.000 sysload=1.03 cputime=2.381 memavail=734684 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
Stats 16.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1121 bytes_read=4405 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=64000093 heater_bed: target=0 temp=-46.4 pwm=0.000 sysload=1.27 cputime=2.388 memavail=718688 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-54.8 pwm=0.000
MCU 'mcu' shutdown: ADC out of range
clocksync state: mcu_freq=64000000 last_clock=1509702327 clock_est=(13.657 1368451764 64000093.873) min_half_rtt=0.000171 min_rtt_time=13.677 time_avg=13.657(0.241) clock_avg=1368451764.066(15446138.905) pred_variance=2821431579.668
Dumping serial stats: bytes_write=1121 bytes_read=4447 bytes_retransmit=9 bytes_invalid=0 send_seq=137 receive_seq=137 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0
Dumping send queue 100 messages
Sent 0 13.304918 13.304918 9: seq: 15, identify offset=840 count=40
Sent 1 13.306904 13.306904 9: seq: 16, identify offset=880 count=40
Sent 2 13.308976 13.308976 9: seq: 17, identify offset=920 count=40
Sent 3 13.320947 13.320947 9: seq: 18, identify offset=960 count=40
Sent 4 13.323488 13.323488 9: seq: 19, identify offset=1000 count=40
Sent 5 13.326254 13.326254 9: seq: 1a, identify offset=1040 count=40
Sent 6 13.330088 13.330088 9: seq: 1b, identify offset=1080 count=40
Sent 7 13.332362 13.332362 9: seq: 1c, identify offset=1120 count=40
Sent 8 13.337801 13.337801 9: seq: 1d, identify offset=1160 count=40
Sent 9 13.339857 13.339857 9: seq: 1e, identify offset=1200 count=40
Sent 10 13.342504 13.342504 9: seq: 1f, identify offset=1240 count=40
Sent 11 13.346969 13.346969 9: seq: 10, identify offset=1280 count=40
Sent 12 13.349799 13.349799 9: seq: 11, identify offset=1320 count=40
Sent 13 13.351672 13.351672 9: seq: 12, identify offset=1360 count=40
Sent 14 13.353631 13.353631 9: seq: 13, identify offset=1400 count=40
Sent 15 13.355431 13.355431 9: seq: 14, identify offset=1440 count=40
Sent 16 13.359720 13.359720 9: seq: 15, identify offset=1480 count=40
Sent 17 13.361604 13.361604 9: seq: 16, identify offset=1520 count=40
Sent 18 13.363546 13.363546 9: seq: 17, identify offset=1560 count=40
Sent 19 13.365424 13.365424 9: seq: 18, identify offset=1600 count=40
Sent 20 13.367276 13.367276 9: seq: 19, identify offset=1640 count=40
Sent 21 13.369278 13.369278 9: seq: 1a, identify offset=1680 count=40
Sent 22 13.371423 13.371423 9: seq: 1b, identify offset=1720 count=40
Sent 23 13.373290 13.373290 9: seq: 1c, identify offset=1760 count=40
Sent 24 13.375295 13.375295 9: seq: 1d, identify offset=1800 count=40
Sent 25 13.377205 13.377205 9: seq: 1e, identify offset=1840 count=40
Sent 26 13.378974 13.378974 9: seq: 1f, identify offset=1880 count=40
Sent 27 13.380797 13.380797 9: seq: 10, identify offset=1920 count=40
Sent 28 13.384473 13.384473 9: seq: 11, identify offset=1960 count=40
Sent 29 13.386363 13.386363 9: seq: 12, identify offset=2000 count=40
Sent 30 13.388405 13.388405 9: seq: 13, identify offset=2040 count=40
Sent 31 13.390942 13.390942 9: seq: 14, identify offset=2080 count=40
Sent 32 13.398104 13.398104 9: seq: 15, identify offset=2120 count=40
Sent 33 13.401491 13.401491 9: seq: 16, identify offset=2160 count=40
Sent 34 13.403748 13.403748 9: seq: 17, identify offset=2200 count=40
Sent 35 13.407063 13.407063 9: seq: 18, identify offset=2240 count=40
Sent 36 13.411970 13.411970 9: seq: 19, identify offset=2280 count=40
Sent 37 13.415022 13.415022 9: seq: 1a, identify offset=2320 count=40
Sent 38 13.418245 13.418245 9: seq: 1b, identify offset=2360 count=40
Sent 39 13.420531 13.420531 9: seq: 1c, identify offset=2400 count=40
Sent 40 13.422517 13.422517 9: seq: 1d, identify offset=2440 count=40
Sent 41 13.424827 13.424827 9: seq: 1e, identify offset=2480 count=40
Sent 42 13.427184 13.427184 9: seq: 1f, identify offset=2520 count=40
Sent 43 13.429436 13.429436 9: seq: 10, identify offset=2560 count=40
Sent 44 13.431355 13.431355 9: seq: 11, identify offset=2600 count=40
Sent 45 13.433138 13.433138 9: seq: 12, identify offset=2640 count=40
Sent 46 13.434781 13.434781 9: seq: 13, identify offset=2680 count=40
Sent 47 13.436817 13.436817 9: seq: 14, identify offset=2720 count=40
Sent 48 13.438998 13.438998 9: seq: 15, identify offset=2760 count=40
Sent 49 13.441289 13.441289 9: seq: 16, identify offset=2800 count=40
Sent 50 13.443407 13.443407 9: seq: 17, identify offset=2840 count=40
Sent 51 13.445584 13.445584 9: seq: 18, identify offset=2880 count=40
Sent 52 13.447841 13.447841 9: seq: 19, identify offset=2882 count=40
Sent 53 13.464865 13.464865 6: seq: 1a, get_uptime
Sent 54 13.517649 13.517649 6: seq: 1b, get_clock
Sent 55 13.571147 13.571147 6: seq: 1c, get_clock
Sent 56 13.624495 13.624495 6: seq: 1d, get_clock
Sent 57 13.676781 13.676781 6: seq: 1e, get_clock
Sent 58 13.729268 13.729268 6: seq: 1f, get_clock
Sent 59 13.781497 13.781497 6: seq: 10, get_clock
Sent 60 13.834042 13.834042 6: seq: 11, get_clock
Sent 61 13.886534 13.886534 6: seq: 12, get_clock
Sent 62 13.891300 13.891300 6: seq: 13, get_config
Sent 63 13.893028 13.893028 6: seq: 14, get_clock
Sent 64 13.903799 13.903799 7: seq: 15, allocate_oids count=19
Sent 65 13.906068 13.906068 8: seq: 16, config_analog_in oid=10 pin=PA3
Sent 66 13.906864 13.906864 15: seq: 17, config_digital_out oid=11 pin=PB2 value=0 default_value=0 max_duration=320000000
Sent 67 13.907628 13.907628 11: seq: 18, set_digital_out_pwm_cycle oid=11 cycle_ticks=6400000
Sent 68 13.908464 13.908464 11: seq: 19, config_digital_out oid=12 pin=PA8 value=0 default_value=0 max_duration=0
Sent 69 13.909247 13.909247 10: seq: 1a, set_digital_out_pwm_cycle oid=12 cycle_ticks=640000
Sent 70 13.913053 13.913053 12: seq: 1b, config_stepper oid=0 step_pin=PA14 dir_pin=PA10 invert_step=0 step_pulse_ticks=128
Sent 71 13.913677 13.913677 11: seq: 1c, config_digital_out oid=13 pin=PA13 value=1 default_value=1 max_duration=0
Sent 72 13.914285 13.914285 9: seq: 1d, config_endstop oid=1 pin=PC4 pull_up=1
Sent 73 13.914873 13.914873 7: seq: 1e, config_trsync oid=2
Sent 74 13.915659 13.915659 12: seq: 1f, config_stepper oid=3 step_pin=PC8 dir_pin=PA15 invert_step=0 step_pulse_ticks=128
Sent 75 13.916519 13.916519 11: seq: 10, config_digital_out oid=14 pin=PC14 value=1 default_value=1 max_duration=0
Sent 76 13.917428 13.917428 9: seq: 11, config_endstop oid=4 pin=PB0 pull_up=1
Sent 77 13.918129 13.918129 7: seq: 12, config_trsync oid=5
Sent 78 13.918849 13.918849 12: seq: 13, config_stepper oid=6 step_pin=PD2 dir_pin=PD4 invert_step=0 step_pulse_ticks=128
Sent 79 13.919605 13.919605 11: seq: 14, config_digital_out oid=15 pin=PD3 value=1 default_value=1 max_duration=0
Sent 80 13.920391 13.920391 9: seq: 15, config_endstop oid=7 pin=PC6 pull_up=1
Sent 81 13.921016 13.921016 7: seq: 16, config_trsync oid=8
Sent 82 13.921693 13.921693 8: seq: 17, config_analog_in oid=16 pin=PA4
Sent 83 13.922476 13.922476 15: seq: 18, config_digital_out oid=17 pin=PB11 value=0 default_value=0 max_duration=320000000
Sent 84 13.924405 13.924405 11: seq: 19, set_digital_out_pwm_cycle oid=17 cycle_ticks=6400000
Sent 85 13.925143 13.925143 12: seq: 1a, config_stepper oid=9 step_pin=PD5 dir_pin=PD6 invert_step=0 step_pulse_ticks=128
Sent 86 13.925978 13.925978 11: seq: 1b, config_digital_out oid=18 pin=PB3 value=1 default_value=1 max_duration=0
Sent 87 13.926653 13.926653 11: seq: 1c, finalize_config crc=3587364166
Sent 88 13.927258 13.927258 26: seq: 1d, query_analog_in oid=10 clock=1478400000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=12005 max_value=32303 range_check_count=4
Sent 89 13.927933 13.927933 13: seq: 1e, queue_digital_out oid=11 clock=1396473158 on_ticks=0
Sent 90 13.928605 13.928605 13: seq: 1f, queue_digital_out oid=12 clock=1396490540 on_ticks=0
Sent 91 13.929411 13.929411 26: seq: 10, query_analog_in oid=16 clock=1482240000 sample_ticks=64000 sample_count=8 rest_ticks=19200000 min_value=1503 max_value=32303 range_check_count=4
Sent 92 13.930098 13.930098 13: seq: 11, queue_digital_out oid=17 clock=1396879587 on_ticks=0
Sent 93 13.930838 13.930838 6: seq: 12, get_config
Sent 94 13.936803 13.936803 7: seq: 13, stepper_get_position oid=0
Sent 95 13.950422 13.950422 7: seq: 14, stepper_get_position oid=3
Sent 96 13.953151 13.953151 7: seq: 15, stepper_get_position oid=6
Sent 97 13.955839 13.955839 7: seq: 16, stepper_get_position oid=9
Sent 98 14.878751 14.878751 6: seq: 17, get_clock
Sent 99 15.863799 15.863799 6: seq: 18, get_clock
Dumping receive queue 99 messages
Receive: 0 13.242098 13.241654 48: seq: 11, identify_response offset=0 data=b'x\xda\x9dY\xfbo\xe36\x12\xfeWt\x06\x8ak\xafq`I\x96\x1f\x01\xfaC\x92f{E\x9bm\xbaN\xee\x0e(\nA\x96h['
Receive: 1 13.243928 13.243521 48: seq: 12, identify_response offset=40 data=b'XY\xd2\x8aR\x1eW\xec\xff~\xdfpH\x8a\x92\xbd-p\x01\x1c\xf31\x1c\x92\xc3y|3\xfec\x92\xd4\xf5\xe4j\xf2S\x91\xd7\xb5'
Receive: 2 13.246055 13.245596 48: seq: 13, identify_response offset=80 data=b'h&\x17\x93m\x97\x17Y\xfc,\x1a\x99W\xa5\xc4\xd4>M\xaf\xbc\xaf\xfd\xe8j5\rf\xfez\xfa)\x9c\xfa\xdfn\xfdo\xbc\xd5e'
Receive: 3 13.247846 13.247426 49: seq: 14, identify_response offset=120 data=b'x\xe9{46[\xceB\xef\xebF\x14"\x91\xe2\x1b\xef7,\x99\xae\xa6\xdb&)\xd3\x83\xd7\x88\xe7\x9cxy\xc12\x9c\x05\xcb\xdf\xbd'
Receive: 4 13.249829 13.249362 49: seq: 15, identify_response offset=160 data=b'm^vm^Hp\r.\xc3\xe82\x98\x06\xdf\xfa\xf3o\xb7\xc17\x1e\xf7q\x8a\xb4:\x1e\x932\xc3\xfe\x7fL\x92\xa2\xa8\xd2\xa4\x15'
Receive: 5 13.251565 13.251101 49: seq: 16, identify_response offset=200 data=b'q\x95g\xd2K\xab\xael\xbf\xfb*\x9d\\\xad\xe8\xb0m\x8bS\xc6I\xfa\xd1\xc3,\x86\x9d\xf9\xf9\xd2!\xc82CPWR}\xe5\xe5'
Receive: 6 13.253592 13.253118 49: seq: 17, identify_response offset=240 data=b'w_u^\xdd\x15E\xdc\xd5\xbc`\xdd/\xf8\xd4\x89\xe6\xcd\xf2\xc4\x01>\x12u#d\x1b\xb7y\xfaQr\xaf\xc5\x15\xe51oc\xb3'
Receive: 7 13.255456 13.255019 49: seq: 18, identify_response offset=280 data=b'\xab\x97\x97\x10\x9d\xde\x1f\x07L!\x92&\x96\x87\xae\xcd\xaa\x97rr\x15\xd0\xd5\xca]\xbe\xc7\x89^\x8bp\x1e\x99-d\x9d\xc7\xdc\x9c\\'
Receive: 8 13.257467 13.257017 49: seq: 19, identify_response offset=320 data=b'-g=U\x99\x14\xd5>\xceK{zu\xec\xc9U\xd8s\xd2G6\x14\xdc\x8d{9D=;5(\x9a!\xb3\x81\x0c\xa2\xa5%\xce'
Receive: 9 13.259200 13.258804 49: seq: 1a, identify_response offset=360 data=b'\xf2}\xde&E\\u\xedh\xc1sRt\x82\xfa\x99\xd8%]\xd1\xc6v\xe0\x98\xbc\xc6Y\xd7$-\x1e\\\x9d\xd3\xef\xf9\t\xbcg['
Receive: 10 13.261193 13.260784 49: seq: 1b, identify_response offset=400 data=b'\xd5\x03^\xe9`\xf3`a\x89\x0f\xd9|\xbe\\\xcd\x0cq#c\xbd\xb70\x8dln[\x91m-lki[\xa2H\xde\xec\xa3M\xae'
Receive: 11 13.262933 13.262491 49: seq: 1c, identify_response offset=440 data=b'\x16\xa1\xdd$\x0fR\xcf\x08}\xde\x0f\x17\xb9\x0c\xb2\x97\xb3/\xb3\xb6D\xc7\xba[\x07\x91= X\xf5T\xfd5JQ\xd5\xf9\xab(F'
Receive: 12 13.264951 13.264501 49: seq: 1d, identify_response offset=480 data=b'\x02\xcc\x926\x89e\xfe_\xc8\xec\xd0\xc1 \xda\x98\x04\xe7(\x96\x14\x18\xcaK\xe7\xd8Qd\x99\xd6/\xc73\x8f\x92\xbeA\xd9z\x1e\xfa'
Receive: 13 13.266791 13.266344 49: seq: 1e, identify_response offset=520 data=b'I\x0e\xdd\xf8\x910r\xf2J\xf3\xfe\xc4\xb8\xee\x981\xd9W\x9b?\x8b\xf8\x90\xef\x0f\xea\x86\xe1\xca\xa5\x87\x96\xee\x0bq*/\xcf\xce\xc5'
Receive: 14 13.270597 13.270141 49: seq: 1f, identify_response offset=560 data=b'\xed[-X6\xe1`\xa5\xb1\x8cs\x8b\xf5T|\x94\xfb\xef\xbe\xfa\x07\\A8\\\xfb\x92\xb7\x07\x88!N\xa5}\xc4\xb0\xd76\xd9.'
Receive: 15 13.273698 13.273236 49: seq: 10, identify_response offset=600 data=b"\xd7\x81}\x9e\xd4\xea\x8fL\x8b\x8f\xb6\x9dg\xb6\xf9V\xa6\xf1PU\xbc\xf4\x98\xc5'\xda3sv\x10\xe43\xed\xd1\xd1\x8d\xb5Rgy"
Receive: 16 13.275758 13.275211 49: seq: 11, identify_response offset=640 data=b'c\x9a\xec\x10\x14qO\xd5\x15R8L\x83\xfeb\xedA4\xc7\nvZ\x9f\x95\xa8;\xdd\x0bu\xd1_\xbb=\xa6]\xd2X\xddh^'
Receive: 17 13.278708 13.278329 49: seq: 12, identify_response offset=680 data=b'\xe3\x13#\xf7Z;H\x9a\xd7\xe6G\xc1\x1a\xd6\xbb\x94\xb6!y\xf4b\xc5\xa53\xb1\xed\xa0\xcf\x15\xa2\xc5\xda\xf4\xc0e\xaft\x99\xdf\xc7'
Receive: 18 13.282159 13.281594 49: seq: 13, identify_response offset=720 data=b'\xb7d\x8dH\xe0o\x9bL4\xb4\x1f\x9co\xc3\xce 0\x04/M\xde\x8a\x13\nRZ&\xf4/&\xe2(\x9a\xbd(\xd3\xb7\x98\xbc\x06'
Receive: 19 13.289188 13.288772 49: seq: 14, identify_response offset=760 data=b'\x0e\x81!\xf6 \xf1\xa1:\x8a\x13\xdf,\x93c\xed\x1a\x80\xee[\xcf<\xf4\xdd8z\xef\xb5\xf8\xbaV\xc6M\xbe\xdf\x8b\x86.!\xc9>'
Receive: 20 13.297735 13.297184 49: seq: 15, identify_response offset=800 data=b'\xc81E\xfd\xe6*2\xe0LI+\xac\x80\x82\xf9\xc5d\x97\xc3W\xc3\xa4c\x96\xa1\x976)k\xcc\xc5d\x0fkV\xe7\x84\x90uO'
Receive: 21 13.305349 13.304918 49: seq: 16, identify_response offset=840 data=b'\xd1\xc0\x1c\xb8\xdb\xd5\xf4\n\xb0\xc3\x8b\x89v|\xb1\xc4~14\xd0\xfauj\xb3\x9c\x17\xc1\x88\x8c\x9e\xc0\x90\xf5\xcf\xb1\x80\x10\xc9-\x1d'
Receive: 22 13.307350 13.306904 49: seq: 17, identify_response offset=880 data=b'\xab,\xdf\xbd\xc5xk\xcb\xab\x11\xca\xa4<\x1d\x9ep\x02\x9a\xd5V\xb6\xe6e\xfc\x86Cz\x1a\x8b\x0b\xa1\x9d\xc6\x8c\t\xd5\xf2N\xba\x9e'
Receive: 23 13.309419 13.308976 49: seq: 18, identify_response offset=920 data=b'\x10]\xe5\xc7 #\xfa\xa6\xe7\x15\x92u}\x1e\xf4\xabd\xb5k_\x92F\xb8\xcba\x9f\xd6&\xb3\xc44\xcfqZD\xccI\xeb\xd2\xf8'
Receive: 24 13.322004 13.320947 49: seq: 19, identify_response offset=960 data=b'\xfas\xba~&\xca\x16\x97\xf7\xaa\xdd\x0e\x1b*\xa3\xb6q\x11\xf3\xc6=+1\xda\xd7\x8cBg\xa6\xab\xb3\xfe\xa5\x19<\x1c:g\x9b\x08'
Receive: 25 13.323958 13.323488 49: seq: 1a, identify_response offset=1000 data=b'o\xc6*1\x8a\xe8\x03}\xc3i\xd7#:\xa5B]\xef\xbb\x16+K0\x0e\xfa\xff\xa7\x8e\x1f{\x1d\xd7N\xbf\xef\x01\xb8\xec\xb1\xf0 '
Receive: 26 13.326720 13.326254 49: seq: 1b, identify_response offset=1040 data=b"\xd2\x8f\x0eT\x08}s\x86\x11R\xb0'\xa8+\xb8\x91\xf1\xfeN\x94Z\x18\x06\xc3 :\x12\xc6r5$\x1b\xcbb\xb94\xf3\xa30;"
Receive: 27 13.330581 13.330088 49: seq: 1c, identify_response offset=1080 data=b'\xe6\x13\x8d\xe8N\x18\xd9\xd79\x89S_\x00ud\x88\x08K\xf9\x8e%\xb2\x0c\x0c\x83s\x9e\xf9\x0b<\x1c\xc1\x0f\xe4\xce\x1dD\x048\x8a'
Receive: 28 13.335285 13.332362 49: seq: 1d, identify_response offset=1120 data=b'\xcc\x11\xfb\x82\xa5\xd6\x89s\x98\xcb\xeeQ\xb9p\xc0\x8f\xcc\x92\x11\x1a\xb0\xe4\xf6\xada\n\x96\x98\xc2\x8f5Tz`\xf6\xb8\xc6*\x0e\xca'
Receive: 29 13.338223 13.337801 49: seq: 1e, identify_response offset=1160 data=b'\xc2\xf0\x9d\xc3\xa7\xe1\xe6\n\x88\x00i\xcftS\xadgW6\xde\x0f\x0b@E4\xee\x1dF\x80\x11\xe7\x0eO\x88\xd4\r\x14z\xb1<\x07'
Receive: 30 13.340255 13.339857 49: seq: 1f, identify_response offset=1200 data=b'P\x06\x8b\x16\xbc\xa8\x14\xaf\xfa\x08\x08\xb0\xd6\xe2\xf3\x86}\xb0\xcfDF\x1e\x7f\x01\x8b \x15\xe8\x86\x83P\x08\xca\xefz\x8d\xef-|\xe9'
Receive: 31 13.342920 13.342504 49: seq: 10, identify_response offset=1240 data=b'3\x9d\xe3#\x9c\xd9pnf\x07^\x90\x86\xb4\x17\x84\xff\x15\x8e\x0f\xc3\x92E\xbf\xe4\x9c\x0b<\xe6\xb22\x8e\xefX\xc9\xfc\x1ct9a'
Receive: 32 13.347441 13.346969 49: seq: 11, identify_response offset=1280 data=b"\xba\xd0\xe7\xf8\xf2=Bh\x01\xa3\xa2?\x0b.\xd1zHu>\xb6D+\xa2R\xf8'\xa6\x00\x06\xbf\x98\x13\x9a\xb4\x86\xe7\xaf{\x02\x15"
Receive: 33 13.350220 13.349799 49: seq: 12, identify_response offset=1320 data=b'6I{9\xb0z6\xce:Q\x17+\xc0R\xa3\x97\x81\xa8\x95{\xb7\xd1\x87\x1d4^D\xaf&\x19\x92\xc9\x9e\xb1\x00\xa8\xc4\xaa\xa7k'
Receive: 34 13.352131 13.351672 49: seq: 13, identify_response offset=1360 data=b']T$\xea\xaa\xd1!\x99\xadW\xf5\xad\x92\x88\xd7:\xc7\x93\xb8\x00`m9\x8dn\xe1\x12\xc1kq\xb88g\xc7\x8e\r\xcc?\x1b\xa4'
Receive: 35 13.354015 13.353631 49: seq: 14, identify_response offset=1400 data=b'E\xf9\xed\xf5\xf7\xb7\xf1\xfd\xf5\x7f(\xa0\xae\xf1D7O\x9b\xf8\xe1\xc7\xf7\x1b\xcaN\xfc\xf8\xe1z\x8d\x8f?C"\x8e\xe6\x85j\x9e\xd0'
Receive: 36 13.355882 13.355431 49: seq: 15, identify_response offset=1440 data=b'\xdc,\xf0Y\x12\xc9\xcd\xe2\x82Z\xa7\x14+|\xd6\x8abuA\xad!E\x80Y\x7fF\xff|E\x03$\xa7\xdag\xa8B\xfa7g\xaa'
Receive: 37 13.360164 13.359720 49: seq: 16, identify_response offset=1480 data=b"\xf0B\xb5\x87TD@\x1f\xa6!\x923\x14\xb7\xd8\xecV\xedu\x8b\xadn\x07;A\x8b\xd5\xcc5\xeer\xbd\xc4'\x1a\xcf&\x8a\xf5\x1c"
Receive: 38 13.362005 13.361604 49: seq: 17, identify_response offset=1520 data=b'\xac#|\xc2\xd1t\xc0\x87\xa3i\x9f\xe6\xfd\x13\x02\xb5\xfe6\xc0\xc6\xea\x06\xb3\xd1|x\xc2\xfe\xf6\xe7_n\x7f\x8a\xdf}\xb8\xfb\x95\x0c'
Receive: 39 13.363951 13.363546 49: seq: 18, identify_response offset=1560 data=b'm\xa6\xfe.&\xf7\xb7O\xa0\x94\xed1\x0c\xf6\xb3\xad\xff\xfa\n\xca\x87\x7f\xdf\xf3c\x06\x94\xb0}\xb8\xdb\xdc}\xf8\xd7\x1ds~\xda\xdc'
Receive: 40 13.365814 13.365424 49: seq: 19, identify_response offset=1600 data=b'\xa8k\x01\xdc\xe2\x1fU9\x06\xd3i\xf3\x06%-\x88\xe4\x1dd\xf2\x8ed\xb2y\xbc~\xdc\xc4\x9b\xa7\xfb\xcd\xaf\xf1\xcd\xf5\xe6\x8e\xd8.'
Receive: 41 13.367708 13.367276 49: seq: 1a, identify_response offset=1640 data=b'h\xf8\xee\xe1\xe1\xeeC|\xf3\xcb\xe3?\xe3\xbb\xef\x7f\xc0\xb8\xff\x99\x10j\x07\xcc\xac\xb2:U8\xd1HL7]]b\x0c\xe6h\xce'
Receive: 42 13.369702 13.369278 49: seq: 1b, identify_response offset=1680 data=b'\xcc\x0ehEa\xec8\xd0\x8b\xb0\x1f2J0WC\xce\x8bGf\xc0<\xf0\x02\xe7\x82\xcb2z\xfexw\x8f\x83_?>}Pw'
Receive: 43 13.371830 13.371423 49: seq: 1c, identify_response offset=1720 data=b'\xc1\xfa\x87k\x9c\xe7\xb7\xd9\x85\xbf\xf8\x1d\x9d\x1b\xea\xc0\xdds\xef\x96za\xa0{\xdfSo\xbe\xd2\xbd;\xea\xc1\xe9q\xef\x1d\xf5V\x8a'
Receive: 44 13.373825 13.373290 49: seq: 1d, identify_response offset=1760 data=b'\xcb\xe7\x81WG\x8a\xa4jH~\x18\x86\xea\x9a\x89\x8cf\xf3e\xa6n\xd8\x16"\x9a\xf9\xc1\x16G\xd1\xab\xb4\xb8X\x05\xd9\xef\x93\xb6\x05'
Receive: 45 13.375726 13.375295 49: seq: 1e, identify_response offset=1800 data=b'\xaa\x15(\x06Z\x81B\xd5\x02O2fB\x1d99\x99\x06\x19Q\x9cg\xfa\xba\x9e2\xff\x1d\x83-.o\\\x17\xe4\xc5\xde<\x93-'
Receive: 46 13.377644 13.377205 49: seq: 1f, identify_response offset=1840 data=b'd\x1c\x12o\x93\xd2+\xab\xd6\x83;\xf3($x\x88b\x1c\xba<\xe5\x95\xbc\x97C\x8e6{\x17\xe9\xd5\xf0\x8f\xd8\x89c.\xd6\xfe\xbd'
Receive: 47 13.379405 13.378974 49: seq: 10, identify_response offset=1880 data=b'\xa5\xb8\x8d|v\x0f\xaeH\x12\x93\xd6\xcb\xa5\x97\xe8\xbd8{\xe7,F\x13K"%\xcf\xc4\xb9\x16\x8f\xaa\x10\xaf\x00\x10\xb6\x13\xa5g\x12'
Receive: 48 13.382892 13.380797 49: seq: 11, identify_response offset=1920 data=b"\\\xbb\x1eb\xb8\xe5\xc2\x9cW'\x8d\xc4\x94h\x9a\xaaQi\x8c\x99h\x04\x90\x86lUy\xeeGF:\x1e\x8c\xc2K\x0fIY\x8a\x82"
Receive: 49 13.384906 13.384473 49: seq: 12, identify_response offset=1960 data=b'\xablf\xc2\x94\xae\xfaJ\x1a#\x11F\xa2\x86J\x17\x03\x95v\xf5c \xa3S$G\x01\x18\xc39\xb4\x99<V\xcf\xc2\x1c\xc4\xa32'
Receive: 50 13.386766 13.386363 49: seq: 13, identify_response offset=2000 data=b'\x0b\xf9\xdc~\xda\x16el\x19\x86c\xf2\xc9\xbc\xc6\xfev\xff\xd09\x00d\xe7\xb1vQVkF\xa9z\xa2th\xbe\x1a\x0e\x1awO'
Receive: 51 13.388868 13.388405 49: seq: 14, identify_response offset=2040 data=b'1\xc2\x19\xd7\x904=\xe4\xb5\xe66w.>\x80\x9c\x0e\r\xa5h\xf7\xc9+\xa9\xd6\xca\xc8\x90\xcb#\xf7H\x8e\x92\xbd\xf0\x907\x03 '
Receive: 52 13.391422 13.390942 49: seq: 15, identify_response offset=2080 data=b'\x98\xe7\xc1\xdd\xees)\x05\xb6\x04\xe2\xcf\xba\x82\xf2v,&<\xe5\xe9P\xa5tU<\x0b\x12>A\xa9//8$M\xa6\xf4SS'
Receive: 53 13.398563 13.398104 49: seq: 16, identify_response offset=2120 data=b'Su\xe0\x9e$\xae \xa6\x87V\xb3+\xaa\x17\xc6\xa8\xef\xa1\xd4\x89\xc7\xd7!\x8bP\xbe`>\x9a \xfdP\x13\x14\xd8\xdd\x89\xbc\xac\x19'
Receive: 54 13.402436 13.401491 49: seq: 17, identify_response offset=2160 data=b"\xc9q\xde\xa8\xa6J:i?\x1c*\x9fku\xbdn\xaa=t\xe2\x88\xa3't\xb7\x1d\xa0\x10N\tY\x0b\xb25\xaa\x85~\x10\xfaR"
Receive: 55 13.404199 13.403748 49: seq: 18, identify_response offset=2200 data=b"\xa0!eo\xb0\r\x89\x1a\xdaDzK\xb0pc\tN\xa4\xe3\xbd\xe4E\x01\x84\x90\x82\xdf\xa0\x90\xc6\x98\xa7_i%\xf4'+\x08V"
Receive: 56 13.407466 13.407063 49: seq: 19, identify_response offset=2240 data=b'l`s\xfc\x86\xea\x00D\x91\x1f\xbb\xa3\x193\xf6\x80\xeboL\xb1L\xa5\xed`\xa6\xacT\xb9\r\xb7\xc0\xbc\xd1f\xdbV\x95\xb7K\xd4'
Receive: 57 13.412448 13.411970 49: seq: 1a, identify_response offset=2280 data=b'\xed\xf8fT\xa5xtU\x8aD\x06BU\x1e\xe4\xa2\xde\xa3\x92\x07\xad\x048\x92B\xb9\xb9\xa7Rv5\x01$\xecH\x15S\xd6o\xe8'
Receive: 58 13.415464 13.415022 49: seq: 1b, identify_response offset=2320 data=b'\xb1*\xcc#\x87\xec\xca\x8f\xe0\x01\xff\x94q\xbd\xd7\x19\x97\xfd\x04\x94\x90\x95\x1d\xe0NV\x8d\xb2O\xa0,\xe9\xa5R?e_ZcO'
Receive: 59 13.418752 13.418245 49: seq: 1c, identify_response offset=2360 data=b'T\x95\x05\x9c\xd73\x18$\xdb\xc2\xf8${S.Sx\x1a\xfcq\rsT\xee\xb8\xf2~\x81WDT\xdc\x12^\xdbQ\xb9K\xfe\x8d'
Receive: 60 13.420960 13.420531 49: seq: 1d, identify_response offset=2400 data=b'a\xa1\xfa-\xc1:H\xfd\x0bC\xc65,IE\x03\xf8*\xad\x1d)\xa6i\x8a\x006\\\xb3\xaa\x1a\xbf\xbf\xbe\xfd\x89\xcb\x8d\xa6\xe0\xa6'
Receive: 61 13.422915 13.422517 49: seq: 1e, identify_response offset=2440 data=b'p2\t\xaeH\x1ar\xf6\x94\x17\x9c\x01\x83\xf4Z\xac\xdbT\xbe\xd4\xae\x95-\x87 0b\xc9I\x89\x8f\x82\t E\xe8\xaf\xa2HE'
Receive: 62 13.425210 13.424827 49: seq: 1f, identify_response offset=2480 data=b" \xddY\xa8\x08\xc5\x9dE\xa4\x9e\x1e\x9d\xc5b\x89v\xf8\x19\x9c\x8a<\x85\xa8\xb1~\xf2\xc3\xfb'\xef\x87\x87\x9f\x9f\t\xcb@\xb65\xfc"
Receive: 63 13.427694 13.427184 49: seq: 10, identify_response offset=2520 data=b'\x85\xe0\xdfVL\xa9aP\xd0Rv\x1e\x9f\xcb$\xd7a\xff\x13\xc9`E\xe2\xd4\x11<5\xc3\x89\xc2T\xfdP\xa1\x12\xc6\x1e\x97\xafl'
Receive: 64 13.429817 13.429436 49: seq: 11, identify_response offset=2560 data=b'\xb9\x19aJ\xd7\xc2\x14rW%3\x1a3\xcf\xac\xd2!x\x94\xd8&\xa8X\xad\xaa\x9d\xaa<\xf1g\xa7\xd6+t#\xeew\x9f\x06\xeb'
Receive: 65 13.431767 13.431355 49: seq: 12, identify_response offset=2600 data=b'\xbeN)\xa1\xfa\xb6\xec\xb8Z\xf7e\xbe\x01\xe7C\x85\x94~\x7f\xba\x87[E\x84p\xfc\xber\x16\x1b1;\x95\x0b\xd5g\xb1\x10\xd07'
Receive: 66 13.433554 13.433138 49: seq: 13, identify_response offset=2640 data=b'\xc5)\x87\xd4V\xa98\xd3\xba$R\x82f\xbd@\xbc1\xd4\xd02\t\x9c\x92\x95\xbe\x95\xc9D\xbb4U%\xb3\x94^\x03\xdc\xb0\x97['
Receive: 67 13.435208 13.434781 49: seq: 14, identify_response offset=2680 data=b'\xb5]\xad\x94\xc6\xc3$\x81~\x90`\xba\t\x9f\xa4\x18Z\xa6bT\xf3\x9a\x12\x92p\xd7\x0c\xaa.}\tB\x17NLZ\xc5\xe9\xbb\xcb'
Receive: 68 13.437297 13.436817 49: seq: 15, identify_response offset=2720 data=b'r\xdb)\xff\x9cqe\t\xa0\x04v\x1e\x9b\x00"\xf9jS\x82M\xb2w}\xa6\x14v^\x0e\xe1\xb9\x9c\xfe\xe41\xdc\xba\x8d\xf3*S'
Receive: 69 13.439428 13.438998 49: seq: 16, identify_response offset=2760 data=b'\x8a\xcen\x12\xfdW\xaf8W\xd0\xafi\x15\x16[\xf9\x0c\x04e\xafz\xb2;\xea/\xf9\x895l\xde\xa7\xc5\xa3\x9c\x99k\x8b9\xb8\xce'
Receive: 70 13.441709 13.441289 49: seq: 17, identify_response offset=2800 data=b"FN`\xf8\x9egm\xb3c'\xce\x8f\x1c8\x99\xf4\xe9\x05(\x87f\xcb\xf4\xdd\xec\xb8W\xf64\xb1\xa9\xfa\xd9r\xb8c\xc8\xeb\x80\x9c"
Receive: 71 13.443846 13.443407 49: seq: 18, identify_response offset=2840 data=b'\x9cB\x8c\xfc\xdbP\xe7Zy\x04\x1f\xa4\x7fH\x86\x0fz\x9e]\xfa\xc1\xe5l\xea\x07\xd1t\xbf\xddm\x97\xfe6\r&\x9f\xff\x071\xa2'
Receive: 72 13.446055 13.445584 11: seq: 19, identify_response offset=2880 data=b'\x13\xa0'
Receive: 73 13.448277 13.447841 9: seq: 1a, identify_response offset=2882 data=b''
Receive: 74 13.465281 13.464865 12: seq: 1b, uptime high=0 clock=1356170375
Receive: 75 13.518037 13.517649 11: seq: 1c, clock clock=1359549803
Receive: 76 13.572297 13.571147 11: seq: 1d, clock clock=1362973192
Receive: 77 13.624881 13.624495 11: seq: 1e, clock clock=1366386345
Receive: 78 13.677122 13.676781 11: seq: 1f, clock clock=1369732968
Receive: 79 13.729624 13.729268 11: seq: 10, clock clock=1373092675
Receive: 80 13.781924 13.781497 11: seq: 11, clock clock=1376434780
Receive: 81 13.834415 13.834042 11: seq: 12, clock clock=1379798531
Receive: 82 13.886925 13.886534 11: seq: 13, clock clock=1383157991
Receive: 83 13.891698 13.891300 10: seq: 14, config is_config=0 crc=0 is_shutdown=0 move_count=0
Receive: 84 13.893388 13.893028 11: seq: 15, clock clock=1383573804
Receive: 85 13.931171 13.930838 15: seq: 13, config is_config=1 crc=3587364166 is_shutdown=0 move_count=1024
Receive: 86 13.937381 13.936803 8: seq: 14, stepper_position oid=0 pos=0
Receive: 87 13.950766 13.950422 8: seq: 15, stepper_position oid=3 pos=0
Receive: 88 13.953633 13.953151 8: seq: 16, stepper_position oid=6 pos=0
Receive: 89 13.956187 13.955839 8: seq: 17, stepper_position oid=9 pos=0
Receive: 90 14.879105 14.878751 11: seq: 18, clock clock=1446659023
Receive: 91 15.382260 14.878751 15: seq: 18, analog_in_state oid=10 next_clock=1497600000 value=32715
Receive: 92 15.442256 14.878751 15: seq: 18, analog_in_state oid=16 next_clock=1501440000 value=32498
Receive: 93 15.682228 14.878751 15: seq: 18, analog_in_state oid=10 next_clock=1516800000 value=32731
Receive: 94 15.742294 14.878751 15: seq: 18, analog_in_state oid=16 next_clock=1520640000 value=32744
Receive: 95 15.864209 15.863799 11: seq: 19, clock clock=1509702327
Receive: 96 15.982295 15.863799 15: seq: 19, analog_in_state oid=10 next_clock=1536000000 value=32748
Receive: 97 16.042298 15.863799 15: seq: 19, analog_in_state oid=16 next_clock=1539840000 value=32735
Receive: 98 16.282411 15.863799 12: seq: 19, shutdown clock=1536453348 static_string_id=ADC out of range
Transition to shutdown state: MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Dumping gcode input 0 blocks
gcode state: absolute_coord=True absolute_extrude=True base_position=[0.0, 0.0, 0.0, 0.0] last_position=[0.0, 0.0, 0.0, 0.0] homing_position=[0.0, 0.0, 0.0, 0.0] speed_factor=0.016666666666666666 extrude_factor=1.0 speed=25.0
Reactor garbage collection: (13.466374422, 0.0, 0.0)
webhooks client 281473662909264: New connection
Stats 17.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=1127 bytes_read=4523 bytes_retransmit=9 bytes_invalid=0 send_seq=138 receive_seq=138 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999874 heater_bed: target=0 temp=-24.3 pwm=0.000 sysload=1.27 cputime=2.452 memavail=715412 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-69.8 pwm=0.000
webhooks client 281473662909264: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Stats 18.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1133 bytes_read=4644 bytes_retransmit=9 bytes_invalid=0 send_seq=139 receive_seq=139 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999808 heater_bed: target=0 temp=-45.9 pwm=0.000 sysload=1.27 cputime=2.467 memavail=708708 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-45.9 pwm=0.000
Stats 19.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1139 bytes_read=4750 bytes_retransmit=9 bytes_invalid=0 send_seq=140 receive_seq=140 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999813 heater_bed: target=0 temp=-52.4 pwm=0.000 sysload=1.27 cputime=2.476 memavail=709728 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 20.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1145 bytes_read=4886 bytes_retransmit=9 bytes_invalid=0 send_seq=141 receive_seq=141 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999759 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.27 cputime=2.487 memavail=708800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-37.7 pwm=0.000
Stats 21.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1151 bytes_read=4992 bytes_retransmit=9 bytes_invalid=0 send_seq=142 receive_seq=142 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999735 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=1.25 cputime=2.495 memavail=708148 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 22.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000020 mcu_task_stddev=0.000028 bytes_write=1157 bytes_read=5098 bytes_retransmit=9 bytes_invalid=0 send_seq=143 receive_seq=143 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999749 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.25 cputime=2.503 memavail=723096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 23.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1163 bytes_read=5248 bytes_retransmit=9 bytes_invalid=0 send_seq=144 receive_seq=144 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999780 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.25 cputime=2.515 memavail=723096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-62.4 pwm=0.000
Stats 24.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1169 bytes_read=5354 bytes_retransmit=9 bytes_invalid=0 send_seq=145 receive_seq=145 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999839 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.25 cputime=2.526 memavail=723852 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 25.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1175 bytes_read=5460 bytes_retransmit=9 bytes_invalid=0 send_seq=146 receive_seq=146 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999856 heater_bed: target=0 temp=-65.6 pwm=0.000 sysload=1.25 cputime=2.535 memavail=722100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-65.6 pwm=0.000
Stats 26.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1181 bytes_read=5596 bytes_retransmit=9 bytes_invalid=0 send_seq=147 receive_seq=147 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999853 heater_bed: target=0 temp=-44.5 pwm=0.000 sysload=1.31 cputime=2.545 memavail=722848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-53.1 pwm=0.000
Stats 27.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1187 bytes_read=5702 bytes_retransmit=9 bytes_invalid=0 send_seq=148 receive_seq=148 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999829 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=1.31 cputime=2.552 memavail=724188 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 28.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1193 bytes_read=5822 bytes_retransmit=9 bytes_invalid=0 send_seq=149 receive_seq=149 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999813 heater_bed: target=0 temp=-63.9 pwm=0.000 sysload=1.31 cputime=2.571 memavail=723800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-61.0 pwm=0.000
Stats 29.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1199 bytes_read=5958 bytes_retransmit=9 bytes_invalid=0 send_seq=150 receive_seq=150 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999804 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.31 cputime=2.585 memavail=723808 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 30.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1205 bytes_read=6064 bytes_retransmit=9 bytes_invalid=0 send_seq=151 receive_seq=151 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999823 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=1.31 cputime=2.601 memavail=724568 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 31.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1211 bytes_read=6170 bytes_retransmit=9 bytes_invalid=0 send_seq=152 receive_seq=152 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999847 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=1.20 cputime=2.618 memavail=725072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 32.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1217 bytes_read=6306 bytes_retransmit=9 bytes_invalid=0 send_seq=153 receive_seq=153 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999854 heater_bed: target=0 temp=-36.6 pwm=0.000 sysload=1.20 cputime=2.636 memavail=725076 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-55.6 pwm=0.000
Stats 33.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1223 bytes_read=6426 bytes_retransmit=9 bytes_invalid=0 send_seq=154 receive_seq=154 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999856 heater_bed: target=0 temp=-55.6 pwm=0.000 sysload=1.20 cputime=2.650 memavail=722848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-48.5 pwm=0.000
Stats 34.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1229 bytes_read=6532 bytes_retransmit=9 bytes_invalid=0 send_seq=155 receive_seq=155 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999856 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=1.20 cputime=2.662 memavail=722900 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000
Stats 35.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1235 bytes_read=6668 bytes_retransmit=9 bytes_invalid=0 send_seq=156 receive_seq=156 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999845 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=1.20 cputime=2.674 memavail=722900 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-67.5 pwm=0.000
Stats 36.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1241 bytes_read=6774 bytes_retransmit=9 bytes_invalid=0 send_seq=157 receive_seq=157 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999835 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.10 cputime=2.687 memavail=723152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 37.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1247 bytes_read=6880 bytes_retransmit=9 bytes_invalid=0 send_seq=158 receive_seq=158 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999831 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=1.10 cputime=2.700 memavail=724696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-75.9 pwm=0.000
Stats 38.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1253 bytes_read=7030 bytes_retransmit=9 bytes_invalid=0 send_seq=159 receive_seq=159 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999828 heater_bed: target=0 temp=-67.5 pwm=0.000 sysload=1.10 cputime=2.713 memavail=724696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-72.5 pwm=0.000
Stats 39.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1259 bytes_read=7136 bytes_retransmit=9 bytes_invalid=0 send_seq=160 receive_seq=160 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999828 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=1.10 cputime=2.727 memavail=723472 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-67.5 pwm=0.000
Stats 40.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1265 bytes_read=7257 bytes_retransmit=9 bytes_invalid=0 send_seq=161 receive_seq=161 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999831 heater_bed: target=0 temp=-63.9 pwm=0.000 sysload=1.10 cputime=2.740 memavail=724984 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-63.9 pwm=0.000
Stats 41.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1271 bytes_read=7378 bytes_retransmit=9 bytes_invalid=0 send_seq=162 receive_seq=162 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999829 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=1.02 cputime=2.752 memavail=725236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-65.6 pwm=0.000
Stats 42.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1277 bytes_read=7484 bytes_retransmit=9 bytes_invalid=0 send_seq=163 receive_seq=163 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999825 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=1.02 cputime=2.763 memavail=725488 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-61.0 pwm=0.000
Stats 43.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1283 bytes_read=7619 bytes_retransmit=9 bytes_invalid=0 send_seq=164 receive_seq=164 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999828 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.02 cputime=2.778 memavail=724988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-88.2 pwm=0.000
Stats 44.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1289 bytes_read=7740 bytes_retransmit=9 bytes_invalid=0 send_seq=165 receive_seq=165 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999831 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.02 cputime=2.795 memavail=725000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 45.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1295 bytes_read=7846 bytes_retransmit=9 bytes_invalid=0 send_seq=166 receive_seq=166 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999832 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=1.02 cputime=2.811 memavail=725004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 46.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1301 bytes_read=7967 bytes_retransmit=9 bytes_invalid=0 send_seq=167 receive_seq=167 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999830 heater_bed: target=0 temp=-54.8 pwm=0.000 sysload=0.93 cputime=2.826 memavail=724272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-67.5 pwm=0.000
Stats 47.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1307 bytes_read=8088 bytes_retransmit=9 bytes_invalid=0 send_seq=168 receive_seq=168 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999829 heater_bed: target=0 temp=-75.9 pwm=0.000 sysload=0.93 cputime=2.840 memavail=726360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-65.6 pwm=0.000
Stats 48.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1313 bytes_read=8208 bytes_retransmit=9 bytes_invalid=0 send_seq=169 receive_seq=169 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999828 heater_bed: target=0 temp=-99.6 pwm=0.000 sysload=0.93 cputime=2.851 memavail=726196 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 49.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1319 bytes_read=8329 bytes_retransmit=9 bytes_invalid=0 send_seq=170 receive_seq=170 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999829 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=0.93 cputime=2.863 memavail=726204 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-99.6 pwm=0.000
Stats 50.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1325 bytes_read=8450 bytes_retransmit=9 bytes_invalid=0 send_seq=171 receive_seq=171 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999828 heater_bed: target=0 temp=-80.6 pwm=0.000 sysload=0.93 cputime=2.878 memavail=726456 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Stats 51.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1331 bytes_read=8556 bytes_retransmit=9 bytes_invalid=0 send_seq=172 receive_seq=172 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999832 heater_bed: target=0 temp=-88.2 pwm=0.000 sysload=0.86 cputime=2.895 memavail=726484 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-50.3 pwm=0.000
Stats 52.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000014 mcu_task_stddev=0.000010 bytes_write=1337 bytes_read=8677 bytes_retransmit=9 bytes_invalid=0 send_seq=173 receive_seq=173 retransmit_seq=2 srtt=0.000 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=63999835 heater_bed: target=0 temp=-72.5 pwm=0.000 sysload=0.86 cputime=2.913 memavail=726992 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=-80.6 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 281473662909264: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:13:03 2024 (1713096783.3 163.4)
===== Config file =====
[stepper_x]
step_pin = PA14
dir_pin = !PA10
enable_pin = !PA13
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC4
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_y]
step_pin = PC8
dir_pin = !PA15
enable_pin = !PC14
microsteps = 16
rotation_distance = 40
endstop_pin = ^PB0
position_endstop = 0
position_max = 235
homing_speed = 50

[stepper_z]
step_pin = PD2
dir_pin = PD4
enable_pin = !PD3
microsteps = 16
rotation_distance = 8
endstop_pin = ^PC6
position_endstop = 0
position_max = 270

[extruder]
step_pin = PD5
dir_pin = !PD6
enable_pin = !PB3
microsteps = 16
rotation_distance = 33.500
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PB11
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA4
control = pid
pid_kp = 21.527
pid_ki = 1.063
pid_kd = 108.982
min_temp = 0
max_temp = 250

[heater_bed]
heater_pin = PB2
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PA3
control = watermark
min_temp = 0
max_temp = 130

[fan]
pin = PA8

[heater_fan fan1]
pin = PB15

[heater_fan fan2]
pin = PB14

[mcu]
serial = /dev/serial/by-id/usb-Klipper_stm32g0b1xx_390054001950425938323120-if00
baud = 115200
restart_method = command

[printer]
kinematics = cartesian
max_velocity = 300
max_accel = 3000
max_z_velocity = 5
max_z_accel = 100

[board_pins]
aliases = 
	
	EXP1_1=PC1, EXP1_3=PC3, EXP1_5=PC0, EXP1_7=PA2, EXP1_9=<GND>,
	EXP1_2=PC2,  EXP1_4=<RST>, EXP1_6=PA0, EXP1_8=PA1, EXP1_10=<5V>

[bltouch]
sensor_pin = PA6
control_pin = PA7

[neopixel my_neopixel]
pin = PC7
=======================
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 141, in _read_config
    self.load_object(config, section_config.get_name(), None)
  File "/home/biqu/klipper/klippy/klippy.py", line 130, in load_object
    self.objects[section] = init_func(config.getsection(section))
  File "/home/biqu/klipper/klippy/extras/bltouch.py", line 277, in load_config
    blt = BLTouchEndstopWrapper(config)
  File "/home/biqu/klipper/klippy/extras/bltouch.py", line 33, in __init__
    self.position_endstop = config.getfloat('z_offset', minval=0.)
  File "/home/biqu/klipper/klippy/configfile.py", line 65, in getfloat
    return self._get_wrapper(self.fileconfig.getfloat, option, default,
  File "/home/biqu/klipper/klippy/configfile.py", line 32, in _get_wrapper
    raise error("Option '%s' in section '%s' must be specified"
configparser.Error: Option 'z_offset' in section 'bltouch' must be specified
webhooks client 281473662907968: New connection
webhooks client 281473662907968: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Unable to issue reset command on MCU 'mcu'
webhooks client 281473662907968: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:26:30 2024 (1713097590.6 970.8)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 200]: 'version, set to ^!PA6 for low-level trigger.\n'
	[line 203]: 'BIQU MicroProbe V2 User Manual\n'
	[line 208]: 'Probe_Deploy\n'
	[line 209]: 'G4 P500 \n'
	[line 211]: 'Probe_Stow\n'
webhooks client 281473645916704: New connection
webhooks client 281473645916704: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473645916704: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:27:31 2024 (1713097651.5 1031.6)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 209]: 'G4 P500 \n'
	[line 211]: 'Probe_Stow\n'
webhooks client 281473662907920: New connection
webhooks client 281473662907920: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473662907920: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:31:02 2024 (1713097862.8 1242.9)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 209]: 'G4 P500 \n'
	[line 211]: 'Probe_Stow\n'
webhooks client 281473662906672: New connection
webhooks client 281473662906672: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473662906672: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:36:07 2024 (1713098167.9 1548.0)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 208]: 'G4 P500 \n'
	[line 210]: 'Probe_Stow\n'
webhooks client 281473645752128: New connection
webhooks client 281473645752128: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473645752128: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:39:50 2024 (1713098390.3 1770.4)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 208]: 'G4 P500 \n'
	[line 210]: 'Probe_Stow\n'
webhooks client 281473668958720: New connection
webhooks client 281473668958720: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473668958720: Disconnected
Restarting printer
Start printer at Sun Apr 14 12:53:21 2024 (1713099201.0 2581.1)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 208]: 'G4 P500 \n'
	[line 210]: 'Probe_Stow\n'
webhooks client 281473669350160: New connection
webhooks client 281473669350160: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473669350160: Disconnected
Restarting printer
Start printer at Sun Apr 14 13:25:57 2024 (1713101157.7 4537.8)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 211]: 'G4 P500 \n'
	[line 213]: 'Probe_Stow\n'
webhooks client 281473664417264: New connection
webhooks client 281473664417264: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
webhooks client 281473664417264: Disconnected
Restarting printer
Start printer at Sun Apr 14 13:48:17 2024 (1713102497.7 5877.8)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473668886832: New connection
webhooks client 281473668886832: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 13:17:15 2024 (1713100636.0 20.1)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473665432304: New connection
webhooks client 281473665432304: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 14:17:14 2024 (1713104234.9 19.2)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473229527792: New connection
webhooks client 281473229527792: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 15:17:15 2024 (1713107835.5 19.6)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281472969808624: New connection
webhooks client 281472969808624: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 16:17:16 2024 (1713111436.6 19.7)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473739635440: New connection
webhooks client 281473739635440: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 16:17:14 2024 (1713111434.6 17.7)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473801968368: New connection
webhooks client 281473801968368: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 17:17:15 2024 (1713115035.6 19.7)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473562452368: New connection
webhooks client 281473562452368: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 17:17:11 2024 (1713115031.3 15.4)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473561654368: New connection
webhooks client 281473561654368: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Starting Klippy...
Args: ['/home/biqu/klipper/klippy/klippy.py', '/home/biqu/printer_data/config/printer.cfg', '-I', '/home/biqu/printer_data/comms/klippy.serial', '-l', '/home/biqu/printer_data/logs/klippy.log', '-a', '/home/biqu/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-158-g36f9b26e'
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ?
Python: '3.9.2 (default, Feb 28 2021, 17:03:44) \n[GCC 10.2.1 20210110]'
Start printer at Sun Apr 14 17:17:10 2024 (1713115030.6 14.7)
Config error
Traceback (most recent call last):
  File "/home/biqu/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/biqu/klipper/klippy/klippy.py", line 134, in _read_config
    config = pconfig.read_main_config()
  File "/home/biqu/klipper/klippy/configfile.py", line 285, in read_main_config
    regular_config = self._build_config_wrapper(regular_data, filename)
  File "/home/biqu/klipper/klippy/configfile.py", line 272, in _build_config_wrapper
    self._parse_config(data, filename, fileconfig, set())
  File "/home/biqu/klipper/klippy/configfile.py", line 264, in _parse_config
    self._parse_config_buffer(buffer, filename, fileconfig)
  File "/home/biqu/klipper/klippy/configfile.py", line 222, in _parse_config_buffer
    fileconfig.read_file(sbuffer, filename)
  File "/usr/lib/python3.9/configparser.py", line 718, in read_file
    self._read(f, source)
  File "/usr/lib/python3.9/configparser.py", line 1113, in _read
    raise e
configparser.ParsingError: Source contains parsing errors: '/home/biqu/printer_data/config/printer.cfg'
	[line 228]: 'G4 P500 \n'
	[line 230]: 'Probe_Stow\n'
webhooks client 281473245590624: New connection
webhooks client 281473245590624: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}