===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.2

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
Configured MCU 'mcu' (1024 moves)
Args: ['/home/philipp/klipper/klippy/klippy.py', '/home/philipp/printer_data/config/printer.cfg', '-I', '/home/philipp/printer_data/comms/klippy.serial', '-l', '/home/philipp/printer_data/logs/klippy.log', '-a', '/home/philipp/printer_data/comms/klippy.sock']
Git version: 'v0.12.0-155-g4cfa266e-dirty'
Untracked files: klippy/extras/gcode_shell_command.py
Branch: master
Remote: origin
Tracked URL: https://github.com/Klipper3d/klipper
CPU: 4 core ARMv7 Processor rev 4 (v7l)
Python: '3.9.2 (default, Mar 12 2021, 04:06:34) \n[GCC 10.2.1 20210110]'
webhooks client 1965797088: {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
=============== Log rollover at Tue Apr 16 19:05:42 2024 ===============
Stats 42.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2189 bytes_read=7271 bytes_retransmit=9 bytes_invalid=0 send_seq=194 receive_seq=194 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002339  raspberry_pi: temp=45.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.6 sysload=1.47 cputime=7.935 memavail=637080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 43.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2195 bytes_read=7422 bytes_retransmit=9 bytes_invalid=0 send_seq=195 receive_seq=195 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002391  raspberry_pi: temp=45.1 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.7 sysload=1.47 cputime=7.965 memavail=633160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 44.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2201 bytes_read=7588 bytes_retransmit=9 bytes_invalid=0 send_seq=196 receive_seq=196 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002417  raspberry_pi: temp=44.5 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=27.2 sysload=1.47 cputime=7.990 memavail=637500 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 45.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2207 bytes_read=7769 bytes_retransmit=9 bytes_invalid=0 send_seq=197 receive_seq=197 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002443  raspberry_pi: temp=44.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.8 sysload=1.47 cputime=8.013 memavail=637500 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 46.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2213 bytes_read=7934 bytes_retransmit=9 bytes_invalid=0 send_seq=198 receive_seq=198 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002449  raspberry_pi: temp=44.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=25.9 sysload=1.43 cputime=8.028 memavail=645092 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 47.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2219 bytes_read=8100 bytes_retransmit=9 bytes_invalid=0 send_seq=199 receive_seq=199 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002465  raspberry_pi: temp=44.0 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=26.4 sysload=1.43 cputime=8.049 memavail=643844 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 48.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2225 bytes_read=8281 bytes_retransmit=9 bytes_invalid=0 send_seq=200 receive_seq=200 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002469  raspberry_pi: temp=43.5 heater_bed: target=0 temp=18.4 pwm=0.000 mcu_temp: temp=28.0 sysload=1.43 cputime=8.087 memavail=645276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 49.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2231 bytes_read=8432 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002479  raspberry_pi: temp=44.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=26.1 sysload=1.43 cputime=8.104 memavail=643340 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 50.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2237 bytes_read=8598 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002496  raspberry_pi: temp=44.0 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=26.7 sysload=1.43 cputime=8.126 memavail=646044 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 51.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2243 bytes_read=8793 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002512  raspberry_pi: temp=42.9 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=25.3 sysload=1.40 cputime=8.147 memavail=645600 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 52.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2249 bytes_read=8944 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002521  raspberry_pi: temp=43.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.7 sysload=1.40 cputime=8.168 memavail=643896 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 53.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2255 bytes_read=9110 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002531  raspberry_pi: temp=43.5 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.7 sysload=1.40 cputime=8.189 memavail=643404 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 54.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2267 bytes_read=9304 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002541  raspberry_pi: temp=44.0 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.7 sysload=1.40 cputime=8.211 memavail=643404 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 55.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2273 bytes_read=9444 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002547  raspberry_pi: temp=43.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=24.3 sysload=1.40 cputime=8.231 memavail=643404 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.4 pwm=0.000
Stats 131.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2735 bytes_read=22249 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002635  raspberry_pi: temp=46.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.5 sysload=0.41 cputime=10.138 memavail=644016 print_time=136.343 buffer_time=0.581 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1965797088: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:07:13 2024 (1713287233.4 132.8)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.2

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.75
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1965862312: New connection
webhooks client 1965862312: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 139.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000037 bytes_write=2426 bytes_read=5736 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=201 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72005248  raspberry_pi: temp=45.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.46 cputime=14.592 memavail=638096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 140.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000037 bytes_write=2432 bytes_read=5892 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003472  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.3 sysload=0.42 cputime=14.653 memavail=642652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965862312
webhooks: registering remote method 'reboot_machine' for connection id: 1965862312
webhooks: registering remote method 'pause_job_queue' for connection id: 1965862312
webhooks: registering remote method 'start_job_queue' for connection id: 1965862312
Stats 141.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000037 bytes_write=2438 bytes_read=6058 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003051  raspberry_pi: temp=46.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.42 cputime=14.752 memavail=641652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 142.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000037 bytes_write=2444 bytes_read=6239 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=46.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.42 cputime=14.781 memavail=641400 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 143.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000037 bytes_write=2450 bytes_read=6390 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=46.2 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=24.7 sysload=0.42 cputime=14.809 memavail=641400 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 144.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2456 bytes_read=6570 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=46.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.42 cputime=14.836 memavail=640656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 145.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2462 bytes_read=6751 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=46.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.39 cputime=14.859 memavail=643140 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 146.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2468 bytes_read=6902 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002552  raspberry_pi: temp=47.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.39 cputime=14.882 memavail=642636 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.4 pwm=0.000
Stats 147.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2474 bytes_read=7068 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002495  raspberry_pi: temp=47.2 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.39 cputime=14.909 memavail=642384 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.7 pwm=0.000
Stats 148.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2480 bytes_read=7249 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002480  raspberry_pi: temp=46.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.39 cputime=14.938 memavail=643464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 149.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2486 bytes_read=7414 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002467  raspberry_pi: temp=46.7 heater_bed: target=0 temp=18.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.39 cputime=14.968 memavail=643292 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 150.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2492 bytes_read=7580 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002468  raspberry_pi: temp=46.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.8 sysload=0.36 cputime=14.994 memavail=643792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.3 pwm=0.000
Stats 151.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2498 bytes_read=7761 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002452  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.5 sysload=0.36 cputime=15.022 memavail=643540 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.7 pwm=0.000
Stats 152.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2504 bytes_read=7912 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002477  raspberry_pi: temp=46.2 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.0 sysload=0.36 cputime=15.054 memavail=643316 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 153.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2510 bytes_read=8093 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002483  raspberry_pi: temp=46.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=24.1 sysload=0.36 cputime=15.087 memavail=642876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 154.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2516 bytes_read=8273 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002494  raspberry_pi: temp=46.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.36 cputime=15.115 memavail=642176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 155.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2522 bytes_read=8424 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002503  raspberry_pi: temp=46.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.33 cputime=15.138 memavail=642444 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 156.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2534 bytes_read=8621 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=47.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.2 sysload=0.33 cputime=15.162 memavail=635940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 157.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2540 bytes_read=8787 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002613  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.33 cputime=15.180 memavail=635368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.5 pwm=0.000
Stats 158.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2546 bytes_read=8938 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002617  raspberry_pi: temp=47.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.8 sysload=0.33 cputime=15.206 memavail=635368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.8 pwm=0.000
Stats 159.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2552 bytes_read=9133 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002611  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=24.8 sysload=0.33 cputime=15.235 memavail=635364 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 160.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2558 bytes_read=9299 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002593  raspberry_pi: temp=47.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=25.7 sysload=0.30 cputime=15.258 memavail=643236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 161.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2564 bytes_read=9450 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002597  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.7 sysload=0.30 cputime=15.282 memavail=641976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.6 pwm=0.000
Stats 162.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2570 bytes_read=9631 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002608  raspberry_pi: temp=47.2 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.5 sysload=0.30 cputime=15.310 memavail=641500 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 163.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2576 bytes_read=9797 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002609  raspberry_pi: temp=47.2 heater_bed: target=0 temp=18.6 pwm=0.000 mcu_temp: temp=28.0 sysload=0.30 cputime=15.338 memavail=641276 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Error on 'dump_tmc': missing STEPPER
Stats 164.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2582 bytes_read=9962 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002603  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.8 sysload=0.30 cputime=15.371 memavail=641612 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.5 pwm=0.000
Stats 165.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2588 bytes_read=10143 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002600  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.2 sysload=0.28 cputime=15.392 memavail=639680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Stats 166.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2594 bytes_read=10309 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002598  raspberry_pi: temp=47.2 heater_bed: target=0 temp=18.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.28 cputime=15.420 memavail=639820 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.1 pwm=0.000
Stats 167.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2600 bytes_read=10460 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002606  raspberry_pi: temp=47.2 heater_bed: target=0 temp=18.5 pwm=0.000 mcu_temp: temp=26.5 sysload=0.28 cputime=15.445 memavail=639820 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.2 pwm=0.000
Stats 168.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2606 bytes_read=10641 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002619  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.7 sysload=0.28 cputime=15.472 memavail=639820 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 169.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2612 bytes_read=10821 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002616  raspberry_pi: temp=47.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.28 cputime=15.499 memavail=641600 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 170.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2618 bytes_read=10972 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002612  raspberry_pi: temp=47.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.25 cputime=15.523 memavail=643384 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 171.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2624 bytes_read=11153 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002612  raspberry_pi: temp=47.8 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=27.6 sysload=0.25 cputime=15.551 memavail=642880 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 172.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2630 bytes_read=11319 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002612  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.25 cputime=15.579 memavail=642656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 173.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2636 bytes_read=11470 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002611  raspberry_pi: temp=47.8 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=27.3 sysload=0.25 cputime=15.606 memavail=642656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.6 pwm=0.000
Stats 174.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2642 bytes_read=11665 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002607  raspberry_pi: temp=47.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.25 cputime=15.634 memavail=642656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 175.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2648 bytes_read=11831 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002603  raspberry_pi: temp=47.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.31 cputime=15.658 memavail=641384 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.9 pwm=0.000
Stats 176.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2654 bytes_read=11982 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002608  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.8 sysload=0.31 cputime=15.680 memavail=640172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.2 pwm=0.000
Unknown command:"DUMP_TMX"
Stats 177.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2660 bytes_read=12163 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002605  raspberry_pi: temp=47.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.1 sysload=0.31 cputime=15.708 memavail=639596 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 178.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2666 bytes_read=12329 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002604  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.31 cputime=15.732 memavail=638404 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.8 pwm=0.000
Stats 179.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2672 bytes_read=12494 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002605  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=25.2 sysload=0.31 cputime=15.758 memavail=635936 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 180.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2678 bytes_read=12690 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002602  raspberry_pi: temp=47.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=26.7 sysload=0.29 cputime=15.782 memavail=636312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 181.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2684 bytes_read=12841 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002601  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.29 cputime=15.806 memavail=635836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 182.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2690 bytes_read=12992 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002602  raspberry_pi: temp=47.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.4 sysload=0.29 cputime=15.834 memavail=635360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 183.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2696 bytes_read=13188 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002605  raspberry_pi: temp=47.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=25.9 sysload=0.29 cputime=15.866 memavail=639704 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
DUMP_TMC extruder
========== Write-only registers ==========
SLAVECONF:  00000200 senddelay=2
IHOLD_IRUN: 00081818 ihold=24 irun=24 iholddelay=8
TPWMTHRS:   00000000
TPOWERDOWN: 00000014 tpowerdown=20
SGTHRS:     00000000
========== Queried registers ==========
GCONF:      000001c0 pdn_disable=1 mstep_reg_select=1 multistep_filt=1
GSTAT:      00000001 reset=1(Reset)
IFCNT:      00000008 ifcnt=8
OTP_READ:   00000010 otp_fclktrim=16
IOIN:       21000041 enn=1 pdn_uart=1 version=0x21
FACTORY_CONF: 00000010 fclktrim=16
TSTEP:      000fffff tstep=1048575
MSCNT:      00000028 mscnt=40
MSCURACT:   00ef003c cur_a=60 cur_b=239
CHOPCONF:   34030053 toff=3 hstrt=5 tbl=2 vsense=1 mres=4(16usteps) intpol=1 dedge=1
DRV_STATUS: c0180000 cs_actual=24 stealth=1 stst=1
PWMCONF:    c80d0e24 pwm_ofs=36 pwm_grad=14 pwm_freq=1 pwm_autoscale=1 pwm_autograd=1 pwm_reg=8 pwm_lim=12
PWM_SCALE:  0000001c pwm_scale_sum=28
PWM_AUTO:   000e0024 pwm_ofs_auto=36 pwm_grad_auto=14
SG_RESULT:  00000000
Stats 184.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=2912 bytes_read=13698 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002613  raspberry_pi: temp=47.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.0 sysload=0.29 cputime=15.959 memavail=639732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.3 pwm=0.000
Stats 185.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=2918 bytes_read=13849 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002617  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.27 cputime=15.980 memavail=641288 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.1 pwm=0.000
Stats 186.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=2924 bytes_read=14045 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002617  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=24.1 sysload=0.27 cputime=16.005 memavail=641064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 187.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=2930 bytes_read=14196 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002626  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=25.5 sysload=0.27 cputime=16.031 memavail=639536 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.7 pwm=0.000
Stats 188.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=2936 bytes_read=14347 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002624  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.4 sysload=0.27 cputime=16.052 memavail=638828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.0 pwm=0.000
Stats 189.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2942 bytes_read=14557 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002628  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.7 sysload=0.27 cputime=16.078 memavail=636664 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.6 pwm=0.000
Stats 190.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2948 bytes_read=14708 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002627  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.1 sysload=0.48 cputime=16.100 memavail=638920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=20.2 pwm=0.000
Stats 191.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2954 bytes_read=14859 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002636  raspberry_pi: temp=48.9 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.48 cputime=16.123 memavail=638668 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.8 pwm=0.000
Stats 192.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2960 bytes_read=15052 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=47.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=26.0 sysload=0.48 cputime=16.151 memavail=638192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=19.0 pwm=0.000
Stats 193.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2966 bytes_read=15193 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.8 sysload=0.48 cputime=16.178 memavail=638192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=18.5 pwm=0.000
Stats 246.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3290 bytes_read=24149 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.39 cputime=17.527 memavail=643524 print_time=112.726 buffer_time=0.039 print_stall=0 extruder: target=200 temp=19.9 pwm=1.000
Heater extruder approaching new target of 200.000
Stats 247.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3327 bytes_read=24310 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.39 cputime=17.554 memavail=642908 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=20.2 pwm=1.000
Stats 248.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3333 bytes_read=24476 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.39 cputime=17.582 memavail=642656 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.7 pwm=1.000
Stats 249.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3339 bytes_read=24657 bytes_retransmit=0 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.39 cputime=17.612 memavail=640944 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.8 pwm=1.000
Stats 250.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3345 bytes_read=24822 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=28.0 sysload=0.36 cputime=17.636 memavail=643328 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=19.4 pwm=1.000
Stats 251.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3367 bytes_read=24993 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.4 sysload=0.36 cputime=17.660 memavail=642852 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=20.9 pwm=1.000
Stats 252.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3373 bytes_read=25168 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=27.6 sysload=0.36 cputime=17.688 memavail=642132 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=22.2 pwm=1.000
Stats 253.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3379 bytes_read=25309 bytes_retransmit=0 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.36 cputime=17.714 memavail=642132 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=23.7 pwm=1.000
Stats 254.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3385 bytes_read=25464 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.36 cputime=17.741 memavail=642132 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=25.9 pwm=1.000
Stats 255.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3402 bytes_read=25647 bytes_retransmit=0 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=48.9 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.4 sysload=0.33 cputime=17.764 memavail=643356 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=27.7 pwm=1.000
Stats 256.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3408 bytes_read=25797 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.8 sysload=0.33 cputime=17.790 memavail=643104 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=29.0 pwm=1.000
Stats 257.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3414 bytes_read=25963 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.2 sysload=0.33 cputime=17.817 memavail=643372 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=31.1 pwm=1.000
Stats 258.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3420 bytes_read=26144 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.33 cputime=17.845 memavail=642868 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=33.9 pwm=1.000
Stats 259.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3442 bytes_read=26300 bytes_retransmit=0 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=25.6 sysload=0.33 cputime=17.874 memavail=641172 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=36.1 pwm=1.000
Stats 260.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3448 bytes_read=26480 bytes_retransmit=0 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.30 cputime=17.897 memavail=642824 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=37.5 pwm=1.000
Stats 261.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3454 bytes_read=26661 bytes_retransmit=0 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.30 cputime=17.925 memavail=643448 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=40.5 pwm=1.000
Stats 262.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3460 bytes_read=26812 bytes_retransmit=0 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.1 sysload=0.30 cputime=17.953 memavail=642944 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=42.8 pwm=1.000
Stats 263.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3482 bytes_read=26998 bytes_retransmit=0 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=24.1 sysload=0.30 cputime=17.982 memavail=642720 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=44.5 pwm=1.000
Stats 264.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3488 bytes_read=27164 bytes_retransmit=0 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=48.9 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.1 sysload=0.30 cputime=18.008 memavail=643276 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=47.9 pwm=1.000
Stats 265.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3494 bytes_read=27315 bytes_retransmit=0 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.7 sysload=0.28 cputime=18.032 memavail=643064 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=50.0 pwm=1.000
Stats 266.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3500 bytes_read=27510 bytes_retransmit=0 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.28 cputime=18.063 memavail=643536 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=52.3 pwm=1.000
Stats 267.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3522 bytes_read=27681 bytes_retransmit=0 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.28 cputime=18.093 memavail=641864 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=55.0 pwm=1.000
Stats 268.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3528 bytes_read=27832 bytes_retransmit=0 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.28 cputime=18.125 memavail=641192 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=57.2 pwm=1.000
Stats 269.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3534 bytes_read=28013 bytes_retransmit=0 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=48.9 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.28 cputime=18.154 memavail=638756 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=59.1 pwm=1.000
Stats 270.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3540 bytes_read=28179 bytes_retransmit=0 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=48.9 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.28 cputime=18.182 memavail=642440 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=62.2 pwm=1.000
Stats 271.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3546 bytes_read=28344 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.26 cputime=18.211 memavail=641208 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=64.1 pwm=1.000
Stats 272.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3568 bytes_read=28530 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=48.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=25.4 sysload=0.26 cputime=18.240 memavail=640984 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=66.1 pwm=1.000
Stats 273.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3574 bytes_read=28696 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=48.9 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.26 cputime=18.268 memavail=642452 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=68.8 pwm=1.000
Stats 274.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3580 bytes_read=28847 bytes_retransmit=0 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.26 cputime=18.295 memavail=642004 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=70.7 pwm=1.000
Stats 275.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3586 bytes_read=29028 bytes_retransmit=0 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=49.4 heater_bed: target=0 temp=18.7 pwm=0.000 mcu_temp: temp=26.8 sysload=0.26 cputime=18.318 memavail=641960 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=72.9 pwm=1.000
Stats 276.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3608 bytes_read=29213 bytes_retransmit=0 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.9 sysload=0.24 cputime=18.341 memavail=642532 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=75.8 pwm=1.000
Stats 277.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3620 bytes_read=29380 bytes_retransmit=0 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.24 cputime=18.371 memavail=637616 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=77.7 pwm=1.000
Stats 278.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3626 bytes_read=29561 bytes_retransmit=0 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=49.4 heater_bed: target=0 temp=18.9 pwm=0.000 mcu_temp: temp=26.4 sysload=0.24 cputime=18.401 memavail=639016 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=79.6 pwm=1.000
Stats 279.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3632 bytes_read=29727 bytes_retransmit=0 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.0 sysload=0.24 cputime=18.430 memavail=638344 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=81.9 pwm=1.000
Stats 280.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3654 bytes_read=29883 bytes_retransmit=0 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=48.3 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.24 cputime=18.453 memavail=642876 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.9 pwm=1.000
Stats 281.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3660 bytes_read=30078 bytes_retransmit=0 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.22 cputime=18.481 memavail=641168 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=85.8 pwm=1.000
Stats 282.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3666 bytes_read=30244 bytes_retransmit=0 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=24.3 sysload=0.22 cputime=18.509 memavail=640720 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=88.6 pwm=1.000
Stats 283.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3672 bytes_read=30395 bytes_retransmit=0 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=27.8 sysload=0.22 cputime=18.537 memavail=642612 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=90.3 pwm=1.000
Stats 284.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3694 bytes_read=30581 bytes_retransmit=0 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.22 cputime=18.565 memavail=640188 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=92.2 pwm=1.000
Stats 285.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3700 bytes_read=30747 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.22 cputime=18.589 memavail=643340 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=94.6 pwm=1.000
Stats 286.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3706 bytes_read=30912 bytes_retransmit=0 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.7 sysload=0.20 cputime=18.617 memavail=642688 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=96.5 pwm=1.000
Stats 287.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3712 bytes_read=31093 bytes_retransmit=0 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.20 cputime=18.646 memavail=641456 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=98.1 pwm=1.000
Stats 288.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3734 bytes_read=31264 bytes_retransmit=0 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.5 sysload=0.20 cputime=18.676 memavail=643412 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=100.5 pwm=1.000
Stats 289.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3740 bytes_read=31415 bytes_retransmit=0 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.20 cputime=18.705 memavail=643260 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=102.3 pwm=1.000
Stats 290.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3746 bytes_read=31596 bytes_retransmit=0 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.2 sysload=0.20 cputime=18.729 memavail=642756 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=104.1 pwm=1.000
Stats 291.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3752 bytes_read=31776 bytes_retransmit=0 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.1 sysload=0.18 cputime=18.758 memavail=642056 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=106.1 pwm=1.000
Stats 292.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3758 bytes_read=31927 bytes_retransmit=0 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.18 cputime=18.786 memavail=641832 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=108.0 pwm=1.000
Stats 293.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3780 bytes_read=32113 bytes_retransmit=0 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.7 sysload=0.18 cputime=18.814 memavail=641836 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=109.4 pwm=1.000
Stats 294.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3786 bytes_read=32279 bytes_retransmit=0 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.18 cputime=18.843 memavail=641836 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=111.9 pwm=1.000
Stats 295.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3792 bytes_read=32430 bytes_retransmit=0 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.0 sysload=0.18 cputime=18.867 memavail=643468 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=113.5 pwm=1.000
Stats 296.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3798 bytes_read=32625 bytes_retransmit=0 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.17 cputime=18.894 memavail=643008 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=115.1 pwm=1.000
Stats 297.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3820 bytes_read=32796 bytes_retransmit=0 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.3 sysload=0.17 cputime=18.923 memavail=642308 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=117.0 pwm=1.000
Stats 298.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3826 bytes_read=32947 bytes_retransmit=0 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.1 sysload=0.17 cputime=18.952 memavail=641860 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=118.8 pwm=1.000
Stats 299.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3832 bytes_read=33128 bytes_retransmit=0 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.17 cputime=18.981 memavail=640420 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=120.2 pwm=1.000
Stats 300.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3838 bytes_read=33294 bytes_retransmit=0 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=30.8 sysload=0.17 cputime=19.005 memavail=642336 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=122.3 pwm=1.000
Stats 301.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3860 bytes_read=33464 bytes_retransmit=0 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.2 sysload=0.15 cputime=19.030 memavail=641160 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=124.0 pwm=1.000
Stats 302.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3866 bytes_read=33645 bytes_retransmit=0 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.6 sysload=0.15 cputime=19.057 memavail=642444 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=125.3 pwm=1.000
Stats 303.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3872 bytes_read=33811 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.7 sysload=0.15 cputime=19.083 memavail=641848 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=127.4 pwm=1.000
Stats 304.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3878 bytes_read=33961 bytes_retransmit=0 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.15 cputime=19.110 memavail=641120 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=128.8 pwm=1.000
Stats 305.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3900 bytes_read=34144 bytes_retransmit=0 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.7 sysload=0.15 cputime=19.135 memavail=643348 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=130.3 pwm=1.000
Stats 306.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3906 bytes_read=34320 bytes_retransmit=0 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.7 sysload=0.14 cputime=19.159 memavail=642860 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=132.1 pwm=1.000
Stats 307.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3912 bytes_read=34468 bytes_retransmit=0 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=25.9 sysload=0.14 cputime=19.186 memavail=641908 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=133.6 pwm=1.000
Stats 308.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3918 bytes_read=34646 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.14 cputime=19.213 memavail=640964 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=135.6 pwm=1.000
Stats 309.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3940 bytes_read=34813 bytes_retransmit=0 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.0 sysload=0.14 cputime=19.240 memavail=639256 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=137.0 pwm=1.000
Stats 310.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3946 bytes_read=34961 bytes_retransmit=0 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=26.8 sysload=0.14 cputime=19.261 memavail=642664 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=138.4 pwm=1.000
Stats 311.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3952 bytes_read=35166 bytes_retransmit=0 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.9 sysload=0.13 cputime=19.286 memavail=642188 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=140.5 pwm=1.000
Stats 312.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3958 bytes_read=35304 bytes_retransmit=0 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.13 cputime=19.312 memavail=643468 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=141.9 pwm=1.000
Stats 313.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3964 bytes_read=35442 bytes_retransmit=0 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.8 sysload=0.13 cputime=19.338 memavail=642672 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=142.8 pwm=1.000
Stats 314.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3986 bytes_read=35626 bytes_retransmit=0 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.13 cputime=19.366 memavail=642196 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=145.0 pwm=1.000
Stats 315.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3992 bytes_read=35767 bytes_retransmit=0 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.13 cputime=19.388 memavail=643316 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=146.2 pwm=1.000
Stats 316.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3998 bytes_read=35929 bytes_retransmit=0 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.12 cputime=19.412 memavail=642840 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=147.4 pwm=1.000
Stats 317.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=4004 bytes_read=36121 bytes_retransmit=0 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.12 cputime=19.438 memavail=642120 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=149.3 pwm=1.000
Stats 318.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=4021 bytes_read=36269 bytes_retransmit=0 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=31.0 sysload=0.12 cputime=19.464 memavail=641896 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=150.5 pwm=1.000
Stats 319.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=4027 bytes_read=36417 bytes_retransmit=0 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=26.4 sysload=0.12 cputime=19.491 memavail=643424 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=151.8 pwm=1.000
Stats 320.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=4033 bytes_read=36609 bytes_retransmit=0 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.1 sysload=0.12 cputime=19.516 memavail=643120 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=153.6 pwm=1.000
Stats 321.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4039 bytes_read=36771 bytes_retransmit=0 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.0 sysload=0.11 cputime=19.541 memavail=642420 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=154.8 pwm=1.000
Stats 322.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4061 bytes_read=36924 bytes_retransmit=0 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=26.5 sysload=0.11 cputime=19.570 memavail=642592 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=155.9 pwm=1.000
Stats 323.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4067 bytes_read=37116 bytes_retransmit=0 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=25.7 sysload=0.11 cputime=19.599 memavail=642144 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=157.7 pwm=1.000
Stats 324.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4073 bytes_read=37264 bytes_retransmit=0 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=25.5 sysload=0.11 cputime=19.629 memavail=641696 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=158.9 pwm=1.000
Stats 325.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4079 bytes_read=37412 bytes_retransmit=0 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.11 cputime=19.655 memavail=643536 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=160.0 pwm=1.000
Stats 326.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4101 bytes_read=37623 bytes_retransmit=0 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.10 cputime=19.686 memavail=642836 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=161.7 pwm=1.000
Stats 327.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4107 bytes_read=37771 bytes_retransmit=0 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.8 sysload=0.10 cputime=19.715 memavail=642360 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=162.9 pwm=1.000
Stats 328.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4113 bytes_read=37919 bytes_retransmit=0 bytes_invalid=0 send_seq=428 receive_seq=428 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.10 cputime=19.741 memavail=642832 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=164.2 pwm=1.000
Stats 329.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4119 bytes_read=38111 bytes_retransmit=0 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.10 cputime=19.767 memavail=643392 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=165.9 pwm=1.000
Stats 330.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4141 bytes_read=38264 bytes_retransmit=0 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.10 cputime=19.789 memavail=642892 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=167.0 pwm=1.000
Stats 331.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4147 bytes_read=38426 bytes_retransmit=0 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.8 sysload=0.09 cputime=19.812 memavail=642192 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=168.1 pwm=1.000
Stats 332.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4153 bytes_read=38618 bytes_retransmit=0 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.5 sysload=0.09 cputime=19.838 memavail=642192 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=169.7 pwm=1.000
Stats 333.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4159 bytes_read=38766 bytes_retransmit=0 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.9 sysload=0.09 cputime=19.864 memavail=641248 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=170.9 pwm=1.000
Stats 334.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4165 bytes_read=38914 bytes_retransmit=0 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.09 cputime=19.889 memavail=643012 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=172.0 pwm=1.000
Stats 335.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4187 bytes_read=39111 bytes_retransmit=0 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=49.9 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.09 cputime=19.913 memavail=643620 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=173.7 pwm=1.000
Stats 336.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4193 bytes_read=39259 bytes_retransmit=0 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002652  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.08 cputime=19.938 memavail=642696 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=174.7 pwm=1.000
Stats 337.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4199 bytes_read=39436 bytes_retransmit=0 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.08 cputime=19.964 memavail=643196 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=175.7 pwm=1.000
Stats 338.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4211 bytes_read=39613 bytes_retransmit=0 bytes_invalid=0 send_seq=441 receive_seq=440 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.3 sysload=0.08 cputime=19.989 memavail=642692 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.3 pwm=1.000
Stats 339.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4233 bytes_read=39782 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.08 cputime=20.015 memavail=640756 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.5 pwm=1.000
Stats 340.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4239 bytes_read=39945 bytes_retransmit=0 bytes_invalid=0 send_seq=444 receive_seq=444 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.08 cputime=20.034 memavail=643352 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.6 pwm=1.000
Stats 341.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4245 bytes_read=40122 bytes_retransmit=0 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.08 cputime=20.061 memavail=642400 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.1 pwm=1.000
Stats 342.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4251 bytes_read=40284 bytes_retransmit=0 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.08 cputime=20.088 memavail=642176 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.2 pwm=1.000
Stats 343.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4273 bytes_read=40452 bytes_retransmit=0 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.5 sysload=0.08 cputime=20.115 memavail=642176 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.1 pwm=1.000
Stats 344.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4279 bytes_read=40629 bytes_retransmit=0 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.08 cputime=20.144 memavail=641732 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.8 pwm=0.828
Stats 345.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4344 bytes_read=40792 bytes_retransmit=0 bytes_invalid=0 send_seq=453 receive_seq=453 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.9 sysload=0.08 cputime=20.166 memavail=643344 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=185.6 pwm=0.959
Stats 346.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4398 bytes_read=40970 bytes_retransmit=0 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.07 cputime=20.195 memavail=642644 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.6 pwm=0.923
Stats 347.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4452 bytes_read=41176 bytes_retransmit=0 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.07 cputime=20.224 memavail=643632 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=188.0 pwm=0.892
Stats 348.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4490 bytes_read=41334 bytes_retransmit=0 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.3 sysload=0.07 cputime=20.251 memavail=643376 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.1 pwm=0.789
Stats 349.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4512 bytes_read=41502 bytes_retransmit=0 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.07 cputime=20.278 memavail=643748 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.1 pwm=0.678
Stats 350.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4550 bytes_read=41689 bytes_retransmit=0 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.6 sysload=0.07 cputime=20.307 memavail=641516 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.2 pwm=0.707
Stats 351.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4588 bytes_read=41847 bytes_retransmit=0 bytes_invalid=0 send_seq=472 receive_seq=472 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.1 sysload=0.23 cputime=20.337 memavail=642408 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.0 pwm=0.713
Stats 352.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4594 bytes_read=42024 bytes_retransmit=0 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.4 sysload=0.23 cputime=20.366 memavail=641960 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.8 pwm=0.713
Stats 353.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4632 bytes_read=42211 bytes_retransmit=0 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.23 cputime=20.394 memavail=641512 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.6 pwm=0.734
Stats 354.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4670 bytes_read=42369 bytes_retransmit=0 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.23 cputime=20.420 memavail=642704 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.2 pwm=0.737
Stats 355.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4708 bytes_read=42542 bytes_retransmit=0 bytes_invalid=0 send_seq=482 receive_seq=482 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.23 cputime=20.440 memavail=643324 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.8 pwm=0.738
Stats 356.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4741 bytes_read=42724 bytes_retransmit=0 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.6 sysload=0.21 cputime=20.468 memavail=643200 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.7 pwm=0.632
Heater extruder within range of 200.000
Stats 357.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4795 bytes_read=42901 bytes_retransmit=0 bytes_invalid=0 send_seq=488 receive_seq=488 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.21 cputime=20.497 memavail=642496 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.9 pwm=0.783
Stats 358.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4833 bytes_read=43074 bytes_retransmit=0 bytes_invalid=0 send_seq=491 receive_seq=491 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.21 cputime=20.523 memavail=642048 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.3 pwm=0.717
Stats 359.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4866 bytes_read=43256 bytes_retransmit=0 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=27.2 sysload=0.21 cputime=20.550 memavail=640364 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.1 pwm=0.670
Stats 360.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4904 bytes_read=43414 bytes_retransmit=0 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=18.8 pwm=0.000 mcu_temp: temp=26.4 sysload=0.21 cputime=20.571 memavail=642032 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.4 pwm=0.604
Stats 361.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=4926 bytes_read=43582 bytes_retransmit=0 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.19 cputime=20.601 memavail=641332 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.705
Stats 362.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4948 bytes_read=43778 bytes_retransmit=0 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.19 cputime=20.630 memavail=642548 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.2 pwm=0.650
Stats 363.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4986 bytes_read=43936 bytes_retransmit=0 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.19 cputime=20.658 memavail=641844 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.506
Stats 364.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5024 bytes_read=44109 bytes_retransmit=0 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.4 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.5 sysload=0.19 cputime=20.689 memavail=643456 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.565
Stats 365.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5062 bytes_read=44296 bytes_retransmit=0 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.19 cputime=20.713 memavail=643176 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.9 pwm=0.706
Stats 366.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5100 bytes_read=44454 bytes_retransmit=0 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.17 cputime=20.744 memavail=642476 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.621
Stats 367.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5106 bytes_read=44631 bytes_retransmit=0 bytes_invalid=0 send_seq=513 receive_seq=513 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=49.9 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.5 sysload=0.17 cputime=20.774 memavail=643656 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.621
Stats 368.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5128 bytes_read=44813 bytes_retransmit=0 bytes_invalid=0 send_seq=515 receive_seq=515 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.4 sysload=0.17 cputime=20.806 memavail=642732 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.644
Stats 369.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5166 bytes_read=44971 bytes_retransmit=0 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=28.7 sysload=0.17 cputime=20.836 memavail=640768 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.586
Stats 370.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5204 bytes_read=45144 bytes_retransmit=0 bytes_invalid=0 send_seq=521 receive_seq=521 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.17 cputime=20.856 memavail=643620 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.588
Stats 371.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5242 bytes_read=45326 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.16 cputime=20.882 memavail=643144 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.589
Stats 372.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5280 bytes_read=45487 bytes_retransmit=0 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.8 sysload=0.16 cputime=20.908 memavail=642696 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.532
Stats 373.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5286 bytes_read=45639 bytes_retransmit=0 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=49.4 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=25.5 sysload=0.16 cputime=20.933 memavail=641492 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.532
Stats 374.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5324 bytes_read=45809 bytes_retransmit=0 bytes_invalid=0 send_seq=531 receive_seq=530 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.16 cputime=20.960 memavail=641268 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.515
Stats 375.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5362 bytes_read=45968 bytes_retransmit=0 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.16 cputime=20.982 memavail=643396 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.551
Stats 376.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5384 bytes_read=46136 bytes_retransmit=0 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.15 cputime=21.007 memavail=643140 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.631
Stats 377.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5417 bytes_read=46332 bytes_retransmit=0 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.15 cputime=21.035 memavail=642916 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.588
Stats 378.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5439 bytes_read=46485 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=26.9 sysload=0.15 cputime=21.060 memavail=642216 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.673
Stats 379.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5477 bytes_read=46658 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.9 sysload=0.15 cputime=21.087 memavail=640028 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.659
Stats 380.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5515 bytes_read=46845 bytes_retransmit=0 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.15 cputime=21.109 memavail=643508 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.637
Stats 381.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5553 bytes_read=47003 bytes_retransmit=0 bytes_invalid=0 send_seq=549 receive_seq=549 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.7 sysload=0.14 cputime=21.135 memavail=643312 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.635
Stats 382.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5575 bytes_read=47200 bytes_retransmit=0 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.14 cputime=21.164 memavail=642648 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.546
Stats 383.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5597 bytes_read=47367 bytes_retransmit=0 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.6 sysload=0.14 cputime=21.190 memavail=642888 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.613
Stats 384.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5630 bytes_read=47520 bytes_retransmit=0 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.0 sysload=0.14 cputime=21.217 memavail=642440 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.569
Stats 385.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5668 bytes_read=47708 bytes_retransmit=0 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=51.0 heater_bed: target=0 temp=18.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.14 cputime=21.240 memavail=643216 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.527
Stats 386.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5706 bytes_read=47880 bytes_retransmit=0 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.0 sysload=0.12 cputime=21.269 memavail=642948 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.534
Stats 387.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5760 bytes_read=48057 bytes_retransmit=0 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.0 sysload=0.12 cputime=21.294 memavail=642724 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.674
Stats 388.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5814 bytes_read=48250 bytes_retransmit=0 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.12 cputime=21.321 memavail=642500 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.523
Stats 389.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5868 bytes_read=48427 bytes_retransmit=0 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.9 sysload=0.12 cputime=21.350 memavail=640564 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.631
Stats 390.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5874 bytes_read=48575 bytes_retransmit=0 bytes_invalid=0 send_seq=574 receive_seq=574 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=21.371 memavail=643244 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.631
Stats 391.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5907 bytes_read=48758 bytes_retransmit=0 bytes_invalid=0 send_seq=576 receive_seq=576 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=18.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.11 cputime=21.397 memavail=642320 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.568
Stats 392.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5913 bytes_read=48934 bytes_retransmit=0 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.11 cputime=21.424 memavail=641844 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.568
Stats 393.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5951 bytes_read=49092 bytes_retransmit=0 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.6 sysload=0.11 cputime=21.452 memavail=643032 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.576
Stats 394.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5973 bytes_read=49275 bytes_retransmit=0 bytes_invalid=0 send_seq=582 receive_seq=582 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.11 cputime=21.481 memavail=642556 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.635
Stats 395.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6043 bytes_read=49457 bytes_retransmit=0 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=51.0 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.11 cputime=21.506 memavail=642884 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.619
Stats 396.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6065 bytes_read=49610 bytes_retransmit=0 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.8 sysload=0.10 cputime=21.530 memavail=643300 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.552
Stats 397.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6103 bytes_read=49812 bytes_retransmit=0 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.10 cputime=21.559 memavail=642348 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.529
Stats 398.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6125 bytes_read=49979 bytes_retransmit=0 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=25.9 sysload=0.10 cputime=21.581 memavail=639832 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.680
Stats 399.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6169 bytes_read=50153 bytes_retransmit=0 bytes_invalid=0 send_seq=598 receive_seq=598 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.10 cputime=21.602 memavail=639384 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.582
Stats 400.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6175 bytes_read=50331 bytes_retransmit=0 bytes_invalid=0 send_seq=599 receive_seq=599 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.10 cputime=21.631 memavail=642732 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.582
Stats 401.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6240 bytes_read=50508 bytes_retransmit=0 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.26 cputime=21.662 memavail=642284 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.646
Stats 402.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6294 bytes_read=50685 bytes_retransmit=0 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.26 cputime=21.694 memavail=640336 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.692
Stats 403.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6332 bytes_read=50873 bytes_retransmit=0 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.26 cputime=21.722 memavail=642076 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.644
Stats 404.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6365 bytes_read=51040 bytes_retransmit=0 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.1 sysload=0.26 cputime=21.750 memavail=641628 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.631
Stats 405.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6403 bytes_read=51198 bytes_retransmit=0 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002638  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.4 sysload=0.26 cputime=21.773 memavail=641480 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.588
Stats 406.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6457 bytes_read=51391 bytes_retransmit=0 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.2 sysload=0.32 cputime=21.800 memavail=639532 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.510
Stats 407.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6511 bytes_read=51582 bytes_retransmit=0 bytes_invalid=0 send_seq=623 receive_seq=623 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.32 cputime=21.830 memavail=642736 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.629
Stats 408.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6533 bytes_read=51735 bytes_retransmit=0 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.32 cputime=21.857 memavail=642260 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.507
Stats 409.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6571 bytes_read=51923 bytes_retransmit=0 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.6 sysload=0.32 cputime=21.886 memavail=639820 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.538
Stats 410.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6593 bytes_read=52090 bytes_retransmit=0 bytes_invalid=0 send_seq=630 receive_seq=630 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.4 sysload=0.32 cputime=21.909 memavail=643316 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.608
Stats 411.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6647 bytes_read=52253 bytes_retransmit=0 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.4 sysload=0.29 cputime=21.937 memavail=642392 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.484
Stats 412.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6669 bytes_read=52450 bytes_retransmit=0 bytes_invalid=0 send_seq=636 receive_seq=636 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=51.0 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.29 cputime=21.964 memavail=641216 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.595
Stats 413.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6675 bytes_read=52612 bytes_retransmit=0 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.29 cputime=21.993 memavail=643144 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.595
Stats 414.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6681 bytes_read=52760 bytes_retransmit=0 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.29 cputime=22.019 memavail=641980 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.595
Stats 415.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6730 bytes_read=52948 bytes_retransmit=0 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.5 sysload=0.29 cputime=22.050 memavail=643116 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.544
Stats 416.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6768 bytes_read=53120 bytes_retransmit=0 bytes_invalid=0 send_seq=644 receive_seq=644 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.2 sysload=0.27 cputime=22.082 memavail=643100 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.536
Stats 417.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6806 bytes_read=53292 bytes_retransmit=0 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=49.9 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=30.3 sysload=0.27 cputime=22.113 memavail=641376 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.561
Stats 418.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6828 bytes_read=53489 bytes_retransmit=0 bytes_invalid=0 send_seq=649 receive_seq=649 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=49.9 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=25.2 sysload=0.27 cputime=22.143 memavail=640928 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.574
Stats 419.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6866 bytes_read=53647 bytes_retransmit=0 bytes_invalid=0 send_seq=652 receive_seq=652 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.9 sysload=0.27 cputime=22.171 memavail=639932 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.638
Stats 420.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6888 bytes_read=53800 bytes_retransmit=0 bytes_invalid=0 send_seq=654 receive_seq=654 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=25.6 sysload=0.27 cputime=22.191 memavail=641172 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.554
Stats 421.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6910 bytes_read=53997 bytes_retransmit=0 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.6 sysload=0.25 cputime=22.218 memavail=639452 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.512
Stats 422.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6975 bytes_read=54160 bytes_retransmit=0 bytes_invalid=0 send_seq=660 receive_seq=660 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.4 sysload=0.25 cputime=22.246 memavail=639452 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.569
Stats 423.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6997 bytes_read=54327 bytes_retransmit=0 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.6 sysload=0.25 cputime=22.273 memavail=639452 print_time=112.726 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.676
TMC 'extruder' reports GSTAT:      00000001 reset=1(Reset)
TMC 'extruder' reports GSTAT:      00000000
Pausing toolhead to calculate extruder phase offset
Stats 424.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7917 bytes_read=54967 bytes_retransmit=0 bytes_invalid=0 send_seq=695 receive_seq=695 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=312 freq=72002643  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.7 sysload=0.25 cputime=22.391 memavail=638444 print_time=340.487 buffer_time=49.642 print_stall=0 extruder: target=200 temp=200.0 pwm=0.630
Stats 425.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7983 bytes_read=55166 bytes_retransmit=0 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=296 freq=72002641  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.25 cputime=22.417 memavail=643708 print_time=340.487 buffer_time=48.641 print_stall=0 extruder: target=200 temp=200.0 pwm=0.630
Stats 426.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8073 bytes_read=55370 bytes_retransmit=0 bytes_invalid=0 send_seq=704 receive_seq=704 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=280 freq=72002641  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.23 cputime=22.454 memavail=643324 print_time=340.487 buffer_time=47.640 print_stall=0 extruder: target=200 temp=200.0 pwm=0.618
Stats 427.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8147 bytes_read=55618 bytes_retransmit=0 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=264 freq=72002642  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.23 cputime=22.495 memavail=644164 print_time=340.487 buffer_time=46.639 print_stall=0 extruder: target=200 temp=200.0 pwm=0.568
Stats 428.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000015 bytes_write=8237 bytes_read=55837 bytes_retransmit=0 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=248 freq=72002643  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.0 sysload=0.23 cputime=22.532 memavail=643684 print_time=340.487 buffer_time=45.639 print_stall=0 extruder: target=200 temp=200.0 pwm=0.621
Stats 429.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000015 bytes_write=8306 bytes_read=56036 bytes_retransmit=0 bytes_invalid=0 send_seq=718 receive_seq=718 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=232 freq=72002642  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.23 cputime=22.571 memavail=641544 print_time=340.487 buffer_time=44.638 print_stall=0 extruder: target=200 temp=199.9 pwm=0.627
Stats 430.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000015 bytes_write=8404 bytes_read=56289 bytes_retransmit=0 bytes_invalid=0 send_seq=724 receive_seq=724 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=216 freq=72002639  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.0 sysload=0.23 cputime=22.601 memavail=643568 print_time=340.487 buffer_time=43.637 print_stall=0 extruder: target=200 temp=199.9 pwm=0.551
Stats 431.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000015 bytes_write=8489 bytes_read=56479 bytes_retransmit=0 bytes_invalid=0 send_seq=728 receive_seq=728 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=200 freq=72002649  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=32.1 sysload=0.21 cputime=22.636 memavail=643092 print_time=340.487 buffer_time=42.637 print_stall=0 extruder: target=200 temp=200.0 pwm=0.572
Stats 432.8: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000024 mcu_task_stddev=0.000015 bytes_write=8563 bytes_read=56673 bytes_retransmit=0 bytes_invalid=0 send_seq=733 receive_seq=733 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=184 freq=72002648  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.21 cputime=22.675 memavail=642840 print_time=340.487 buffer_time=41.636 print_stall=0 extruder: target=200 temp=199.7 pwm=0.750
Stats 433.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=8629 bytes_read=56917 bytes_retransmit=0 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=168 freq=72002648  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.5 sysload=0.21 cputime=22.714 memavail=643612 print_time=340.487 buffer_time=40.635 print_stall=0 extruder: target=200 temp=199.8 pwm=0.660
Stats 434.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=8706 bytes_read=57106 bytes_retransmit=0 bytes_invalid=0 send_seq=741 receive_seq=741 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=152 freq=72002647  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.4 sysload=0.21 cputime=22.754 memavail=643368 print_time=340.487 buffer_time=39.635 print_stall=0 extruder: target=200 temp=199.7 pwm=0.648
Stats 435.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=8796 bytes_read=57310 bytes_retransmit=0 bytes_invalid=0 send_seq=746 receive_seq=746 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=136 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.21 cputime=22.783 memavail=643620 print_time=340.487 buffer_time=38.634 print_stall=0 extruder: target=200 temp=199.7 pwm=0.660
Stats 436.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=8849 bytes_read=57548 bytes_retransmit=0 bytes_invalid=0 send_seq=749 receive_seq=749 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=120 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.19 cputime=22.821 memavail=643364 print_time=340.487 buffer_time=37.633 print_stall=0 extruder: target=200 temp=199.6 pwm=0.643
Stats 437.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=8955 bytes_read=57757 bytes_retransmit=0 bytes_invalid=0 send_seq=755 receive_seq=755 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=104 freq=72002646  raspberry_pi: temp=50.5 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.4 sysload=0.19 cputime=22.860 memavail=642888 print_time=340.487 buffer_time=36.633 print_stall=0 extruder: target=200 temp=199.1 pwm=0.896
Stats 438.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9053 bytes_read=57980 bytes_retransmit=0 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=88 freq=72002646  raspberry_pi: temp=51.0 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.2 sysload=0.19 cputime=22.898 memavail=642888 print_time=340.487 buffer_time=35.632 print_stall=0 extruder: target=200 temp=199.5 pwm=0.598
Stats 439.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9143 bytes_read=58233 bytes_retransmit=0 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=72 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.4 sysload=0.19 cputime=22.938 memavail=641440 print_time=340.487 buffer_time=34.631 print_stall=0 extruder: target=200 temp=199.5 pwm=0.624
Stats 440.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9193 bytes_read=58427 bytes_retransmit=0 bytes_invalid=0 send_seq=770 receive_seq=770 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=56 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.1 sysload=0.19 cputime=22.967 memavail=643700 print_time=340.487 buffer_time=33.630 print_stall=0 extruder: target=200 temp=199.5 pwm=0.624
Stats 441.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9243 bytes_read=58621 bytes_retransmit=0 bytes_invalid=0 send_seq=773 receive_seq=773 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=40 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=23.004 memavail=643512 print_time=340.487 buffer_time=32.629 print_stall=0 extruder: target=200 temp=199.6 pwm=0.624
Stats 442.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9325 bytes_read=58869 bytes_retransmit=0 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=24 freq=72002644  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=23.044 memavail=643512 print_time=340.487 buffer_time=31.629 print_stall=0 extruder: target=200 temp=199.8 pwm=0.523
Stats 443.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9402 bytes_read=59082 bytes_retransmit=0 bytes_invalid=0 send_seq=782 receive_seq=782 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=8 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.17 cputime=23.085 memavail=643260 print_time=340.487 buffer_time=30.629 print_stall=0 extruder: target=200 temp=199.7 pwm=0.631
Stats 444.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9484 bytes_read=59301 bytes_retransmit=0 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.7 sysload=0.17 cputime=23.124 memavail=643920 print_time=340.487 buffer_time=29.628 print_stall=0 extruder: target=200 temp=199.6 pwm=0.701
Stats 445.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9534 bytes_read=59529 bytes_retransmit=0 bytes_invalid=0 send_seq=791 receive_seq=791 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.8 sysload=0.17 cputime=23.152 memavail=643884 print_time=340.487 buffer_time=28.627 print_stall=0 extruder: target=200 temp=199.8 pwm=0.633
Stats 446.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9627 bytes_read=59738 bytes_retransmit=0 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.16 cputime=23.187 memavail=643408 print_time=340.487 buffer_time=27.627 print_stall=0 extruder: target=200 temp=199.8 pwm=0.614
Stats 447.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=9677 bytes_read=59952 bytes_retransmit=0 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.2 sysload=0.16 cputime=23.225 memavail=643368 print_time=340.487 buffer_time=26.626 print_stall=0 extruder: target=200 temp=199.7 pwm=0.687
Stats 448.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9743 bytes_read=60199 bytes_retransmit=0 bytes_invalid=0 send_seq=806 receive_seq=806 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.16 cputime=23.263 memavail=643620 print_time=340.487 buffer_time=25.625 print_stall=0 extruder: target=200 temp=199.4 pwm=0.801
Stats 449.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9820 bytes_read=60403 bytes_retransmit=0 bytes_invalid=0 send_seq=811 receive_seq=811 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.5 sysload=0.16 cputime=23.299 memavail=641404 print_time=340.487 buffer_time=24.624 print_stall=0 extruder: target=200 temp=199.4 pwm=0.756
Stats 450.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9886 bytes_read=60622 bytes_retransmit=0 bytes_invalid=0 send_seq=816 receive_seq=816 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.16 cputime=23.325 memavail=643608 print_time=340.487 buffer_time=23.624 print_stall=0 extruder: target=200 temp=199.5 pwm=0.760
Stats 451.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9952 bytes_read=60855 bytes_retransmit=0 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.3 sysload=0.15 cputime=23.362 memavail=643576 print_time=340.487 buffer_time=22.623 print_stall=0 extruder: target=200 temp=199.7 pwm=0.558
Stats 452.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10045 bytes_read=61064 bytes_retransmit=0 bytes_invalid=0 send_seq=827 receive_seq=827 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=32.1 sysload=0.15 cputime=23.400 memavail=643100 print_time=340.487 buffer_time=21.622 print_stall=0 extruder: target=200 temp=199.6 pwm=0.703
Stats 453.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10127 bytes_read=61302 bytes_retransmit=0 bytes_invalid=0 send_seq=833 receive_seq=833 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.5 sysload=0.15 cputime=23.439 memavail=642852 print_time=340.487 buffer_time=20.621 print_stall=0 extruder: target=200 temp=199.6 pwm=0.725
Stats 454.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10188 bytes_read=61530 bytes_retransmit=0 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.15 cputime=23.479 memavail=642852 print_time=340.487 buffer_time=19.620 print_stall=0 extruder: target=200 temp=199.7 pwm=0.684
Stats 455.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10249 bytes_read=61729 bytes_retransmit=0 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.15 cputime=23.507 memavail=643760 print_time=340.487 buffer_time=18.619 print_stall=0 extruder: target=200 temp=199.7 pwm=0.708
Stats 456.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10331 bytes_read=61953 bytes_retransmit=0 bytes_invalid=0 send_seq=847 receive_seq=847 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.7 sysload=0.14 cputime=23.547 memavail=643508 print_time=340.487 buffer_time=17.619 print_stall=0 extruder: target=200 temp=199.9 pwm=0.611
Stats 457.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10381 bytes_read=62181 bytes_retransmit=0 bytes_invalid=0 send_seq=851 receive_seq=851 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.14 cputime=23.586 memavail=643284 print_time=340.487 buffer_time=16.618 print_stall=0 extruder: target=200 temp=199.9 pwm=0.625
Stats 458.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10474 bytes_read=62404 bytes_retransmit=0 bytes_invalid=0 send_seq=857 receive_seq=857 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.3 sysload=0.14 cputime=23.625 memavail=643284 print_time=340.487 buffer_time=15.617 print_stall=0 extruder: target=200 temp=200.0 pwm=0.639
Stats 459.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10540 bytes_read=62623 bytes_retransmit=0 bytes_invalid=0 send_seq=862 receive_seq=862 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.14 cputime=23.662 memavail=641572 print_time=340.487 buffer_time=14.617 print_stall=0 extruder: target=200 temp=200.0 pwm=0.578
Stats 460.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10623 bytes_read=62872 bytes_retransmit=0 bytes_invalid=0 send_seq=868 receive_seq=868 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002652  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.14 cputime=23.690 memavail=643280 print_time=340.487 buffer_time=13.616 print_stall=0 extruder: target=200 temp=200.0 pwm=0.572
Stats 461.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10689 bytes_read=63076 bytes_retransmit=0 bytes_invalid=0 send_seq=873 receive_seq=873 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.6 sysload=0.12 cputime=23.726 memavail=642776 print_time=340.487 buffer_time=12.615 print_stall=0 extruder: target=200 temp=199.9 pwm=0.587
Stats 462.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10755 bytes_read=63295 bytes_retransmit=0 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.5 sysload=0.12 cputime=23.763 memavail=642776 print_time=340.487 buffer_time=11.615 print_stall=0 extruder: target=200 temp=200.0 pwm=0.509
Stats 463.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10821 bytes_read=63542 bytes_retransmit=0 bytes_invalid=0 send_seq=883 receive_seq=883 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.7 sysload=0.12 cputime=23.802 memavail=642776 print_time=340.487 buffer_time=10.614 print_stall=0 extruder: target=200 temp=200.0 pwm=0.554
Stats 464.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10903 bytes_read=63751 bytes_retransmit=0 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.12 cputime=23.839 memavail=644272 print_time=340.487 buffer_time=9.613 print_stall=0 extruder: target=200 temp=199.9 pwm=0.638
Stats 465.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10969 bytes_read=63970 bytes_retransmit=0 bytes_invalid=0 send_seq=894 receive_seq=894 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.12 cputime=23.866 memavail=643684 print_time=340.487 buffer_time=8.612 print_stall=0 extruder: target=200 temp=200.0 pwm=0.592
Stats 466.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11035 bytes_read=64203 bytes_retransmit=0 bytes_invalid=0 send_seq=899 receive_seq=899 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.11 cputime=23.902 memavail=643268 print_time=340.487 buffer_time=7.611 print_stall=0 extruder: target=200 temp=199.7 pwm=0.759
Stats 467.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11101 bytes_read=64407 bytes_retransmit=0 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.5 sysload=0.11 cputime=23.939 memavail=643316 print_time=340.487 buffer_time=6.610 print_stall=0 extruder: target=200 temp=199.8 pwm=0.672
Stats 468.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11183 bytes_read=64645 bytes_retransmit=0 bytes_invalid=0 send_seq=910 receive_seq=910 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002652  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.8 sysload=0.11 cputime=23.977 memavail=643092 print_time=340.487 buffer_time=5.609 print_stall=0 extruder: target=200 temp=200.1 pwm=0.486
Stats 469.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11265 bytes_read=64883 bytes_retransmit=0 bytes_invalid=0 send_seq=916 receive_seq=916 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=50.5 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.11 cputime=24.015 memavail=641608 print_time=340.487 buffer_time=4.609 print_stall=0 extruder: target=200 temp=199.8 pwm=0.714
Stats 470.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11347 bytes_read=65092 bytes_retransmit=0 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.3 sysload=0.11 cputime=24.042 memavail=643812 print_time=340.487 buffer_time=3.608 print_stall=0 extruder: target=200 temp=200.0 pwm=0.565
Stats 471.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11413 bytes_read=65311 bytes_retransmit=0 bytes_invalid=0 send_seq=927 receive_seq=927 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.5 sysload=0.10 cputime=24.078 memavail=643580 print_time=340.487 buffer_time=2.608 print_stall=0 extruder: target=200 temp=200.0 pwm=0.601
Stats 472.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11479 bytes_read=65544 bytes_retransmit=0 bytes_invalid=0 send_seq=932 receive_seq=932 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.10 cputime=24.117 memavail=642628 print_time=340.487 buffer_time=1.607 print_stall=0 extruder: target=200 temp=200.1 pwm=0.561
Stats 473.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11545 bytes_read=65762 bytes_retransmit=0 bytes_invalid=0 send_seq=937 receive_seq=937 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.7 sysload=0.10 cputime=24.153 memavail=642636 print_time=340.487 buffer_time=0.606 print_stall=0 extruder: target=200 temp=199.8 pwm=0.780
Stats 474.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11629 bytes_read=66004 bytes_retransmit=0 bytes_invalid=0 send_seq=943 receive_seq=943 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.10 cputime=24.193 memavail=642636 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.637
Stats 475.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11711 bytes_read=66242 bytes_retransmit=0 bytes_invalid=0 send_seq=949 receive_seq=949 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002634  raspberry_pi: temp=51.5 heater_bed: target=0 temp=18.9 pwm=0.000 mcu_temp: temp=26.0 sysload=0.10 cputime=24.218 memavail=643544 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.702
Stats 476.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11793 bytes_read=66451 bytes_retransmit=0 bytes_invalid=0 send_seq=955 receive_seq=955 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002633  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.1 sysload=0.10 cputime=24.251 memavail=643288 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.553
Stats 477.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11875 bytes_read=66675 bytes_retransmit=0 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002632  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.10 cputime=24.285 memavail=643488 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 478.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11925 bytes_read=66917 bytes_retransmit=0 bytes_invalid=0 send_seq=965 receive_seq=965 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.10 cputime=24.319 memavail=643048 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.568
Stats 479.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11975 bytes_read=67116 bytes_retransmit=0 bytes_invalid=0 send_seq=969 receive_seq=969 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.10 cputime=24.351 memavail=641336 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.729
Stats 480.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12057 bytes_read=67340 bytes_retransmit=0 bytes_invalid=0 send_seq=975 receive_seq=975 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002636  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.10 cputime=24.377 memavail=642532 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.735
Stats 481.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12134 bytes_read=67573 bytes_retransmit=0 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002634  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=24.410 memavail=642056 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.582
Stats 482.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12200 bytes_read=67777 bytes_retransmit=0 bytes_invalid=0 send_seq=985 receive_seq=985 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002632  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.09 cputime=24.443 memavail=642056 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.455
Stats 483.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12282 bytes_read=68015 bytes_retransmit=0 bytes_invalid=0 send_seq=991 receive_seq=991 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.9 sysload=0.09 cputime=24.479 memavail=642056 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.575
Stats 484.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12364 bytes_read=68248 bytes_retransmit=0 bytes_invalid=0 send_seq=997 receive_seq=996 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=24.514 memavail=642056 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.489
Stats 485.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12441 bytes_read=68457 bytes_retransmit=0 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.09 cputime=24.541 memavail=643468 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.585
Stats 486.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12475 bytes_read=68666 bytes_retransmit=0 bytes_invalid=0 send_seq=1005 receive_seq=1005 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002629  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.08 cputime=24.574 memavail=643532 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.585
Stats 487.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12541 bytes_read=68899 bytes_retransmit=0 bytes_invalid=0 send_seq=1010 receive_seq=1010 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.4 sysload=0.08 cputime=24.610 memavail=642796 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.563
Stats 488.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12607 bytes_read=69117 bytes_retransmit=0 bytes_invalid=0 send_seq=1015 receive_seq=1015 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002632  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.08 cputime=24.644 memavail=642544 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.599
Stats 489.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12657 bytes_read=69331 bytes_retransmit=0 bytes_invalid=0 send_seq=1019 receive_seq=1019 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.08 cputime=24.677 memavail=640832 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.506
Stats 490.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12739 bytes_read=69566 bytes_retransmit=0 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.4 sysload=0.08 cputime=24.702 memavail=643236 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.557
Stats 491.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12789 bytes_read=69755 bytes_retransmit=0 bytes_invalid=0 send_seq=1029 receive_seq=1029 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.07 cputime=24.736 memavail=642984 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.615
Stats 492.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12823 bytes_read=69953 bytes_retransmit=0 bytes_invalid=0 send_seq=1032 receive_seq=1032 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002638  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.1 sysload=0.07 cputime=24.770 memavail=642760 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.615
Stats 493.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12921 bytes_read=70198 bytes_retransmit=0 bytes_invalid=0 send_seq=1039 receive_seq=1039 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.07 cputime=24.807 memavail=642256 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.638
Stats 494.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13003 bytes_read=70401 bytes_retransmit=0 bytes_invalid=0 send_seq=1045 receive_seq=1045 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002636  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.07 cputime=24.842 memavail=644256 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.447
Stats 495.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13053 bytes_read=70615 bytes_retransmit=0 bytes_invalid=0 send_seq=1049 receive_seq=1049 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002633  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.07 cputime=24.868 memavail=643744 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.537
Stats 496.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13135 bytes_read=70853 bytes_retransmit=0 bytes_invalid=0 send_seq=1055 receive_seq=1055 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.0 sysload=0.07 cputime=24.902 memavail=643236 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.558
Stats 497.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13201 bytes_read=71057 bytes_retransmit=0 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.5 sysload=0.07 cputime=24.937 memavail=643236 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.605
Stats 498.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13267 bytes_read=71305 bytes_retransmit=0 bytes_invalid=0 send_seq=1065 receive_seq=1065 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.07 cputime=24.972 memavail=643236 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.640
Stats 499.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13333 bytes_read=71523 bytes_retransmit=0 bytes_invalid=0 send_seq=1070 receive_seq=1070 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002629  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.07 cputime=25.005 memavail=641524 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.644
Stats 500.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13399 bytes_read=71727 bytes_retransmit=0 bytes_invalid=0 send_seq=1075 receive_seq=1075 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002627  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.07 cputime=25.028 memavail=643560 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.494
Stats 501.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13449 bytes_read=71956 bytes_retransmit=0 bytes_invalid=0 send_seq=1079 receive_seq=1079 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002627  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.6 sysload=0.06 cputime=25.061 memavail=643548 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.580
Stats 502.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13515 bytes_read=72174 bytes_retransmit=0 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002628  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=25.5 sysload=0.06 cputime=25.095 memavail=642824 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.553
Stats 503.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13565 bytes_read=72387 bytes_retransmit=0 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002628  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.06 cputime=25.128 memavail=643512 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.676
Stats 504.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13615 bytes_read=72616 bytes_retransmit=0 bytes_invalid=0 send_seq=1092 receive_seq=1092 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002628  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.06 cputime=25.161 memavail=643268 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.581
Stats 505.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13681 bytes_read=72834 bytes_retransmit=0 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.06 cputime=25.187 memavail=643336 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.613
Stats 506.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13742 bytes_read=73033 bytes_retransmit=0 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.06 cputime=25.220 memavail=643076 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.683
Stats 507.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13808 bytes_read=73267 bytes_retransmit=0 bytes_invalid=0 send_seq=1106 receive_seq=1106 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.2 sysload=0.06 cputime=25.255 memavail=643808 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.604
Stats 508.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13890 bytes_read=73504 bytes_retransmit=0 bytes_invalid=0 send_seq=1112 receive_seq=1112 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=30.1 sysload=0.06 cputime=25.290 memavail=643396 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.679
Stats 509.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13972 bytes_read=73713 bytes_retransmit=0 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.06 cputime=25.324 memavail=641432 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.556
Stats 510.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14006 bytes_read=73937 bytes_retransmit=0 bytes_invalid=0 send_seq=1121 receive_seq=1121 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.06 cputime=25.347 memavail=644132 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.556
Stats 511.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14072 bytes_read=74155 bytes_retransmit=0 bytes_invalid=0 send_seq=1126 receive_seq=1126 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.05 cputime=25.380 memavail=643656 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.595
Stats 512.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14122 bytes_read=74354 bytes_retransmit=0 bytes_invalid=0 send_seq=1130 receive_seq=1130 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.05 cputime=25.412 memavail=643652 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 513.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14188 bytes_read=74602 bytes_retransmit=0 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=25.3 sysload=0.05 cputime=25.446 memavail=643484 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.588
Stats 514.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14270 bytes_read=74825 bytes_retransmit=0 bytes_invalid=0 send_seq=1141 receive_seq=1141 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002629  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.05 cputime=25.481 memavail=642756 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.492
Stats 515.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14336 bytes_read=75029 bytes_retransmit=0 bytes_invalid=0 send_seq=1146 receive_seq=1146 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002629  raspberry_pi: temp=51.5 heater_bed: target=0 temp=18.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.05 cputime=25.505 memavail=643736 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.668
Stats 516.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14418 bytes_read=75268 bytes_retransmit=0 bytes_invalid=0 send_seq=1152 receive_seq=1152 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002628  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.5 sysload=0.05 cputime=25.539 memavail=643264 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.555
Stats 517.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14463 bytes_read=75476 bytes_retransmit=0 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.0 sysload=0.05 cputime=25.572 memavail=643564 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.623
Stats 518.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14529 bytes_read=75694 bytes_retransmit=0 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.1 sysload=0.05 cputime=25.605 memavail=637596 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.553
Stats 519.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14595 bytes_read=75928 bytes_retransmit=0 bytes_invalid=0 send_seq=1165 receive_seq=1165 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.0 sysload=0.05 cputime=25.627 memavail=640164 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.428
Stats 520.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14683 bytes_read=76146 bytes_retransmit=0 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002630  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.0 sysload=0.05 cputime=25.656 memavail=643572 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.610
Stats 521.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14717 bytes_read=76340 bytes_retransmit=0 bytes_invalid=0 send_seq=1173 receive_seq=1173 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002631  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.04 cputime=25.687 memavail=643788 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.610
Stats 522.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14789 bytes_read=76590 bytes_retransmit=0 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002633  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.04 cputime=25.722 memavail=643128 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.563
Stats 523.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14845 bytes_read=76812 bytes_retransmit=0 bytes_invalid=0 send_seq=1182 receive_seq=1182 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002634  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.04 cputime=25.756 memavail=643128 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.587
Stats 524.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14911 bytes_read=77016 bytes_retransmit=0 bytes_invalid=0 send_seq=1187 receive_seq=1187 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.7 sysload=0.04 cputime=25.789 memavail=643128 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.507
Stats 525.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14993 bytes_read=77255 bytes_retransmit=0 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002641  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.04 cputime=25.813 memavail=643736 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.505
Stats 526.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15054 bytes_read=77468 bytes_retransmit=0 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.04 cputime=25.846 memavail=643008 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.524
Stats 527.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15136 bytes_read=77677 bytes_retransmit=0 bytes_invalid=0 send_seq=1203 receive_seq=1203 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.0 sysload=0.04 cputime=25.881 memavail=643008 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 528.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15186 bytes_read=77920 bytes_retransmit=0 bytes_invalid=0 send_seq=1207 receive_seq=1207 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002638  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.04 cputime=25.918 memavail=643008 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.563
Stats 529.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15268 bytes_read=78143 bytes_retransmit=0 bytes_invalid=0 send_seq=1213 receive_seq=1213 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.04 cputime=25.955 memavail=641296 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.622
Stats 530.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15329 bytes_read=78342 bytes_retransmit=0 bytes_invalid=0 send_seq=1217 receive_seq=1217 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002638  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.0 sysload=0.04 cputime=25.979 memavail=643676 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.609
Stats 531.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15363 bytes_read=78566 bytes_retransmit=0 bytes_invalid=0 send_seq=1220 receive_seq=1220 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.8 sysload=0.04 cputime=26.014 memavail=643648 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.609
Stats 532.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15424 bytes_read=78779 bytes_retransmit=0 bytes_invalid=0 send_seq=1224 receive_seq=1224 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.04 cputime=26.049 memavail=643496 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.627
Stats 533.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15490 bytes_read=78997 bytes_retransmit=0 bytes_invalid=0 send_seq=1229 receive_seq=1229 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.04 cputime=26.085 memavail=642992 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.521
Stats 534.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15524 bytes_read=79221 bytes_retransmit=0 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.04 cputime=26.119 memavail=642992 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.521
Stats 535.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15606 bytes_read=79444 bytes_retransmit=0 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=27.2 sysload=0.04 cputime=26.144 memavail=643532 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 536.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15688 bytes_read=79653 bytes_retransmit=0 bytes_invalid=0 send_seq=1244 receive_seq=1244 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.8 sysload=0.03 cputime=26.178 memavail=642796 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.688
Stats 537.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15765 bytes_read=79887 bytes_retransmit=0 bytes_invalid=0 send_seq=1249 receive_seq=1249 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.03 cputime=26.214 memavail=643300 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.529
Stats 538.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15842 bytes_read=80119 bytes_retransmit=0 bytes_invalid=0 send_seq=1254 receive_seq=1254 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.7 sysload=0.03 cputime=26.249 memavail=642572 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.625
Stats 539.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15892 bytes_read=80318 bytes_retransmit=0 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.03 cputime=26.285 memavail=641084 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.568
Stats 540.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15942 bytes_read=80547 bytes_retransmit=0 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.03 cputime=26.309 memavail=642464 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.695
Stats 541.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16035 bytes_read=80770 bytes_retransmit=0 bytes_invalid=0 send_seq=1268 receive_seq=1268 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.6 sysload=0.03 cputime=26.346 memavail=640464 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.542
Stats 542.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16085 bytes_read=80969 bytes_retransmit=0 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=50.5 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.03 cputime=26.383 memavail=640240 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.610
Stats 543.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16151 bytes_read=81217 bytes_retransmit=0 bytes_invalid=0 send_seq=1277 receive_seq=1277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.7 sysload=0.03 cputime=26.419 memavail=640240 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.626
Stats 544.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16212 bytes_read=81430 bytes_retransmit=0 bytes_invalid=0 send_seq=1281 receive_seq=1281 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.2 sysload=0.03 cputime=26.455 memavail=640240 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.663
Stats 545.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16278 bytes_read=81634 bytes_retransmit=0 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.03 cputime=26.479 memavail=642004 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.600
Stats 546.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16328 bytes_read=81863 bytes_retransmit=0 bytes_invalid=0 send_seq=1290 receive_seq=1290 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.03 cputime=26.515 memavail=641752 print_time=340.487 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.514
Stats 547.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16705 bytes_read=82106 bytes_retransmit=0 bytes_invalid=0 send_seq=1300 receive_seq=1300 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=72002651  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.03 cputime=26.585 memavail=642912 print_time=430.775 buffer_time=16.840 print_stall=0 extruder: target=200 temp=199.9 pwm=0.630
Stats 548.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=16827 bytes_read=82330 bytes_retransmit=0 bytes_invalid=0 send_seq=1306 receive_seq=1306 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=50.5 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.9 sysload=0.03 cputime=26.624 memavail=643136 print_time=430.775 buffer_time=15.839 print_stall=0 extruder: target=200 temp=200.0 pwm=0.545
Stats 549.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=16909 bytes_read=82569 bytes_retransmit=0 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.7 sysload=0.03 cputime=26.664 memavail=640448 print_time=430.775 buffer_time=14.838 print_stall=0 extruder: target=200 temp=200.0 pwm=0.563
Stats 550.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=17002 bytes_read=82786 bytes_retransmit=0 bytes_invalid=0 send_seq=1318 receive_seq=1318 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.03 cputime=26.691 memavail=643716 print_time=430.775 buffer_time=13.837 print_stall=0 extruder: target=200 temp=200.0 pwm=0.575
Stats 551.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=17079 bytes_read=82980 bytes_retransmit=0 bytes_invalid=0 send_seq=1323 receive_seq=1323 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.02 cputime=26.730 memavail=642988 print_time=430.775 buffer_time=12.836 print_stall=0 extruder: target=200 temp=199.7 pwm=0.691
Stats 552.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=17161 bytes_read=83220 bytes_retransmit=0 bytes_invalid=0 send_seq=1329 receive_seq=1329 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.8 sysload=0.02 cputime=26.771 memavail=643532 print_time=430.775 buffer_time=11.835 print_stall=0 extruder: target=200 temp=199.7 pwm=0.614
Stats 553.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17238 bytes_read=83428 bytes_retransmit=0 bytes_invalid=0 send_seq=1334 receive_seq=1334 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.02 cputime=26.809 memavail=642812 print_time=430.775 buffer_time=10.835 print_stall=0 extruder: target=200 temp=199.4 pwm=0.703
Stats 554.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17304 bytes_read=83631 bytes_retransmit=0 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.02 cputime=26.846 memavail=644084 print_time=430.775 buffer_time=9.834 print_stall=0 extruder: target=200 temp=199.0 pwm=0.863
Stats 555.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17370 bytes_read=83879 bytes_retransmit=0 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002642  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.02 cputime=26.874 memavail=643508 print_time=430.775 buffer_time=8.833 print_stall=0 extruder: target=200 temp=198.9 pwm=0.793
Stats 556.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17447 bytes_read=84083 bytes_retransmit=0 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.02 cputime=26.913 memavail=643256 print_time=430.775 buffer_time=7.833 print_stall=0 extruder: target=200 temp=198.7 pwm=0.777
Stats 557.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17513 bytes_read=84287 bytes_retransmit=0 bytes_invalid=0 send_seq=1354 receive_seq=1354 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.5 sysload=0.02 cputime=26.949 memavail=642528 print_time=430.775 buffer_time=6.832 print_stall=0 extruder: target=200 temp=198.6 pwm=0.750
Stats 558.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17563 bytes_read=84544 bytes_retransmit=0 bytes_invalid=0 send_seq=1358 receive_seq=1358 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.02 cputime=26.986 memavail=643308 print_time=430.775 buffer_time=5.832 print_stall=0 extruder: target=200 temp=198.6 pwm=0.743
Stats 559.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17656 bytes_read=84753 bytes_retransmit=0 bytes_invalid=0 send_seq=1364 receive_seq=1364 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.02 cputime=27.026 memavail=642088 print_time=430.775 buffer_time=4.832 print_stall=0 extruder: target=200 temp=198.7 pwm=0.624
Stats 560.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17706 bytes_read=84952 bytes_retransmit=0 bytes_invalid=0 send_seq=1368 receive_seq=1368 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.5 sysload=0.02 cputime=27.051 memavail=643544 print_time=430.775 buffer_time=3.831 print_stall=0 extruder: target=200 temp=198.6 pwm=0.765
Stats 561.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17788 bytes_read=85205 bytes_retransmit=0 bytes_invalid=0 send_seq=1374 receive_seq=1374 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.02 cputime=27.090 memavail=643068 print_time=430.775 buffer_time=2.830 print_stall=0 extruder: target=200 temp=198.7 pwm=0.719
Stats 562.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17822 bytes_read=85399 bytes_retransmit=0 bytes_invalid=0 send_seq=1377 receive_seq=1377 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.02 cputime=27.125 memavail=642844 print_time=430.775 buffer_time=1.829 print_stall=0 extruder: target=200 temp=198.8 pwm=0.719
Stats 563.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17888 bytes_read=85617 bytes_retransmit=0 bytes_invalid=0 send_seq=1382 receive_seq=1382 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.02 cputime=27.162 memavail=642592 print_time=430.775 buffer_time=0.829 print_stall=0 extruder: target=200 temp=198.8 pwm=0.757
Stats 564.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17991 bytes_read=85870 bytes_retransmit=0 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.02 cputime=27.201 memavail=644268 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.756
Stats 565.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18057 bytes_read=86074 bytes_retransmit=0 bytes_invalid=0 send_seq=1393 receive_seq=1393 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.9 sysload=0.02 cputime=27.237 memavail=643700 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.684
Stats 566.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18123 bytes_read=86278 bytes_retransmit=0 bytes_invalid=0 send_seq=1398 receive_seq=1398 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.0 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.02 cputime=27.272 memavail=641836 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.685
Stats 567.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18157 bytes_read=86516 bytes_retransmit=0 bytes_invalid=0 send_seq=1401 receive_seq=1401 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.1 sysload=0.02 cputime=27.307 memavail=641360 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.685
Stats 568.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18223 bytes_read=86734 bytes_retransmit=0 bytes_invalid=0 send_seq=1406 receive_seq=1406 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=50.5 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.02 cputime=27.341 memavail=641376 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.599
Stats 569.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18289 bytes_read=86938 bytes_retransmit=0 bytes_invalid=0 send_seq=1411 receive_seq=1411 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.02 cputime=27.376 memavail=640100 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.605
Stats 570.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18371 bytes_read=87191 bytes_retransmit=0 bytes_invalid=0 send_seq=1417 receive_seq=1417 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=24.5 sysload=0.02 cputime=27.402 memavail=642248 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.568
Stats 571.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18421 bytes_read=87390 bytes_retransmit=0 bytes_invalid=0 send_seq=1421 receive_seq=1421 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.2 sysload=0.02 cputime=27.435 memavail=642024 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.639
Stats 572.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18487 bytes_read=87594 bytes_retransmit=0 bytes_invalid=0 send_seq=1426 receive_seq=1426 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.6 sysload=0.02 cputime=27.468 memavail=642920 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.497
Stats 573.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18569 bytes_read=87861 bytes_retransmit=0 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.8 sysload=0.02 cputime=27.505 memavail=641432 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.491
Stats 574.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18603 bytes_read=88055 bytes_retransmit=0 bytes_invalid=0 send_seq=1435 receive_seq=1435 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.2 sysload=0.02 cputime=27.537 memavail=641440 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.491
Stats 575.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18637 bytes_read=88249 bytes_retransmit=0 bytes_invalid=0 send_seq=1438 receive_seq=1438 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.7 sysload=0.02 cputime=27.562 memavail=643588 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.491
Stats 576.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18671 bytes_read=88487 bytes_retransmit=0 bytes_invalid=0 send_seq=1441 receive_seq=1441 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.02 cputime=27.596 memavail=643676 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.491
Stats 577.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18737 bytes_read=88691 bytes_retransmit=0 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.02 cputime=27.630 memavail=643200 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.504
Stats 578.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18787 bytes_read=88904 bytes_retransmit=0 bytes_invalid=0 send_seq=1450 receive_seq=1450 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.02 cputime=27.663 memavail=642948 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.555
Stats 579.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18869 bytes_read=89157 bytes_retransmit=0 bytes_invalid=0 send_seq=1456 receive_seq=1456 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.3 sysload=0.02 cputime=27.699 memavail=641740 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.499
Stats 580.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18930 bytes_read=89356 bytes_retransmit=0 bytes_invalid=0 send_seq=1460 receive_seq=1460 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.02 cputime=27.723 memavail=644072 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.642
Stats 581.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18980 bytes_read=89555 bytes_retransmit=0 bytes_invalid=0 send_seq=1464 receive_seq=1464 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=30.9 sysload=0.01 cputime=27.762 memavail=643344 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.543
Stats 582.9: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19046 bytes_read=89803 bytes_retransmit=0 bytes_invalid=0 send_seq=1469 receive_seq=1469 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.01 cputime=27.802 memavail=644008 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.648
Stats 583.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19113 bytes_read=90032 bytes_retransmit=0 bytes_invalid=0 send_seq=1474 receive_seq=1474 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=27.3 sysload=0.01 cputime=27.840 memavail=643628 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.574
Stats 584.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19179 bytes_read=90251 bytes_retransmit=0 bytes_invalid=0 send_seq=1479 receive_seq=1479 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=31.1 sysload=0.01 cputime=27.875 memavail=644248 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.576
Stats 585.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19213 bytes_read=90474 bytes_retransmit=0 bytes_invalid=0 send_seq=1482 receive_seq=1482 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.1 sysload=0.01 cputime=27.901 memavail=643528 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.677
Stats 586.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19279 bytes_read=90678 bytes_retransmit=0 bytes_invalid=0 send_seq=1487 receive_seq=1487 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.01 cputime=27.935 memavail=643052 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.569
Stats 587.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19345 bytes_read=90897 bytes_retransmit=0 bytes_invalid=0 send_seq=1492 receive_seq=1492 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.1 sysload=0.01 cputime=27.968 memavail=642800 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.560
Stats 588.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19395 bytes_read=91139 bytes_retransmit=0 bytes_invalid=0 send_seq=1496 receive_seq=1496 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.01 cputime=28.002 memavail=642800 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.653
Stats 589.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19461 bytes_read=91343 bytes_retransmit=0 bytes_invalid=0 send_seq=1501 receive_seq=1501 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.3 sysload=0.01 cputime=28.039 memavail=641348 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.529
Stats 590.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19527 bytes_read=91562 bytes_retransmit=0 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.01 cputime=28.068 memavail=643712 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.682
Stats 591.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19577 bytes_read=91790 bytes_retransmit=0 bytes_invalid=0 send_seq=1510 receive_seq=1510 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.09 cputime=28.104 memavail=643236 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.496
Stats 592.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19659 bytes_read=91999 bytes_retransmit=0 bytes_invalid=0 send_seq=1516 receive_seq=1516 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=51.0 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.4 sysload=0.09 cputime=28.137 memavail=643712 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.531
Stats 593.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19725 bytes_read=92232 bytes_retransmit=0 bytes_invalid=0 send_seq=1521 receive_seq=1521 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.09 cputime=28.175 memavail=643236 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.687
Stats 594.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19791 bytes_read=92465 bytes_retransmit=0 bytes_invalid=0 send_seq=1526 receive_seq=1526 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.09 cputime=28.212 memavail=643236 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.603
Stats 595.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19857 bytes_read=92669 bytes_retransmit=0 bytes_invalid=0 send_seq=1531 receive_seq=1531 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.5 sysload=0.09 cputime=28.238 memavail=643720 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.478
Stats 596.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19907 bytes_read=92883 bytes_retransmit=0 bytes_invalid=0 send_seq=1535 receive_seq=1535 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.08 cputime=28.274 memavail=643236 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.578
Stats 597.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19957 bytes_read=93111 bytes_retransmit=0 bytes_invalid=0 send_seq=1539 receive_seq=1539 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.08 cputime=28.310 memavail=642984 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.462
Stats 598.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20023 bytes_read=93329 bytes_retransmit=0 bytes_invalid=0 send_seq=1544 receive_seq=1544 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.08 cputime=28.346 memavail=642732 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.642
Stats 599.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20073 bytes_read=93543 bytes_retransmit=0 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.0 sysload=0.08 cputime=28.382 memavail=644064 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.498
Stats 600.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20139 bytes_read=93776 bytes_retransmit=0 bytes_invalid=0 send_seq=1553 receive_seq=1553 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.08 cputime=28.409 memavail=642492 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.585
Stats 601.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20205 bytes_read=93980 bytes_retransmit=0 bytes_invalid=0 send_seq=1558 receive_seq=1558 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.08 cputime=28.443 memavail=642016 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.607
Stats 602.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20271 bytes_read=94199 bytes_retransmit=0 bytes_invalid=0 send_seq=1563 receive_seq=1563 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.0 sysload=0.08 cputime=28.478 memavail=642016 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.598
Stats 603.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20316 bytes_read=94436 bytes_retransmit=0 bytes_invalid=0 send_seq=1566 receive_seq=1566 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.08 cputime=28.511 memavail=641264 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.519
Stats 604.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20366 bytes_read=94635 bytes_retransmit=0 bytes_invalid=0 send_seq=1570 receive_seq=1570 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.08 cputime=28.543 memavail=643820 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.638
Stats 605.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20432 bytes_read=94854 bytes_retransmit=0 bytes_invalid=0 send_seq=1575 receive_seq=1575 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.08 cputime=28.567 memavail=643412 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.586
Stats 606.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20498 bytes_read=95087 bytes_retransmit=0 bytes_invalid=0 send_seq=1580 receive_seq=1580 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.8 sysload=0.07 cputime=28.601 memavail=643160 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.670
Stats 607.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20559 bytes_read=95286 bytes_retransmit=0 bytes_invalid=0 send_seq=1584 receive_seq=1584 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.1 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.0 sysload=0.07 cputime=28.634 memavail=642908 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.571
Stats 608.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=20593 bytes_read=95509 bytes_retransmit=0 bytes_invalid=0 send_seq=1587 receive_seq=1587 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.1 heater_bed: target=0 temp=18.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.07 cputime=28.668 memavail=642908 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.571
Stats 609.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=20675 bytes_read=95747 bytes_retransmit=0 bytes_invalid=0 send_seq=1593 receive_seq=1593 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.4 sysload=0.07 cputime=28.701 memavail=641204 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.525
Stats 610.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=20741 bytes_read=95941 bytes_retransmit=0 bytes_invalid=0 send_seq=1598 receive_seq=1598 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.0 sysload=0.07 cputime=28.728 memavail=643560 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.595
Stats 611.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=20775 bytes_read=96139 bytes_retransmit=0 bytes_invalid=0 send_seq=1601 receive_seq=1601 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.06 cputime=28.763 memavail=643676 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.595
Stats 612.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=20857 bytes_read=96365 bytes_retransmit=0 bytes_invalid=0 send_seq=1607 receive_seq=1607 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.06 cputime=28.800 memavail=642260 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.606
Stats 613.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20939 bytes_read=96581 bytes_retransmit=0 bytes_invalid=0 send_seq=1613 receive_seq=1613 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.06 cputime=28.835 memavail=642260 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.634
Stats 614.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21000 bytes_read=96795 bytes_retransmit=0 bytes_invalid=0 send_seq=1617 receive_seq=1617 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.8 sysload=0.06 cputime=28.871 memavail=642260 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.675
Stats 615.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21066 bytes_read=97028 bytes_retransmit=0 bytes_invalid=0 send_seq=1622 receive_seq=1622 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.6 sysload=0.06 cputime=28.896 memavail=641984 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.582
Stats 616.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21116 bytes_read=97227 bytes_retransmit=0 bytes_invalid=0 send_seq=1626 receive_seq=1626 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.06 cputime=28.932 memavail=641240 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.469
Stats 617.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21198 bytes_read=97451 bytes_retransmit=0 bytes_invalid=0 send_seq=1632 receive_seq=1632 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.06 cputime=28.968 memavail=643624 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.519
Stats 618.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21275 bytes_read=97698 bytes_retransmit=0 bytes_invalid=0 send_seq=1637 receive_seq=1637 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.06 cputime=29.007 memavail=643224 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.552
Stats 619.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21357 bytes_read=97907 bytes_retransmit=0 bytes_invalid=0 send_seq=1643 receive_seq=1643 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=26.7 sysload=0.06 cputime=29.045 memavail=641776 print_time=430.775 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.543
Stats 620.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21397 bytes_read=98080 bytes_retransmit=0 bytes_invalid=0 send_seq=1646 receive_seq=1646 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.06 cputime=29.073 memavail=643176 print_time=487.054 buffer_time=0.067 print_stall=0 extruder: target=0 temp=200.1 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1965862312: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:15:22 2024 (1713287722.7 622.1)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.8
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1965840560: New connection
webhooks client 1965840560: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 627.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2421 bytes_read=5660 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=200 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002533  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.05 cputime=32.287 memavail=639064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965840560
webhooks: registering remote method 'reboot_machine' for connection id: 1965840560
webhooks: registering remote method 'pause_job_queue' for connection id: 1965840560
webhooks: registering remote method 'start_job_queue' for connection id: 1965840560
Stats 628.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2442 bytes_read=5848 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003147  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.05 cputime=32.335 memavail=640160 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.0 pwm=0.000
Stats 629.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2448 bytes_read=6025 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002986  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.05 cputime=32.382 memavail=638336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.3 pwm=0.000
Stats 630.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2454 bytes_read=6173 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002776  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.0 sysload=0.05 cputime=32.410 memavail=638084 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.1 pwm=0.000
Stats 631.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2460 bytes_read=6336 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003404  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.13 cputime=32.440 memavail=637860 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.0 pwm=0.000
Stats 632.6: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2466 bytes_read=6513 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003436  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.13 cputime=32.470 memavail=637860 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.6 pwm=0.000
Stats 633.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2472 bytes_read=6675 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003156  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.13 cputime=32.492 memavail=642912 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.5 pwm=0.000
Stats 634.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2478 bytes_read=6838 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002977  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.13 cputime=32.521 memavail=642652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.2 pwm=0.000
Stats 635.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2484 bytes_read=7015 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002889  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.6 sysload=0.13 cputime=32.551 memavail=642400 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.5 pwm=0.000
Stats 636.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2490 bytes_read=7163 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002836  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=32.580 memavail=642464 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.3 pwm=0.000
Stats 637.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2496 bytes_read=7326 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002764  raspberry_pi: temp=51.5 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=32.609 memavail=642240 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.0 pwm=0.000
Stats 638.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2502 bytes_read=7517 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.12 cputime=32.631 memavail=642792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.4 pwm=0.000
Stats 639.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2508 bytes_read=7665 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.12 cputime=32.656 memavail=635864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.0 pwm=0.000
Stats 640.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2514 bytes_read=7828 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.5 sysload=0.12 cputime=32.681 memavail=635612 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.9 pwm=0.000
Stats 641.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2520 bytes_read=8005 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.11 cputime=32.711 memavail=635612 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.2 pwm=0.000
Stats 642.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2526 bytes_read=8153 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002647  raspberry_pi: temp=52.1 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=25.9 sysload=0.11 cputime=32.740 memavail=635612 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.1 pwm=0.000
Stats 643.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2538 bytes_read=8330 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=218 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.11 cputime=32.763 memavail=642956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.6 pwm=0.000
Stats 644.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2544 bytes_read=8523 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.3 sysload=0.11 cputime=32.792 memavail=642296 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.1 pwm=0.000
Stats 645.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2550 bytes_read=8671 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.9 sysload=0.11 cputime=32.820 memavail=642828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.9 pwm=0.000
Stats 646.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2556 bytes_read=8834 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.6 sysload=0.10 cputime=32.849 memavail=642336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.7 pwm=0.000
Stats 647.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2562 bytes_read=9011 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.10 cputime=32.879 memavail=642336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.0 pwm=0.000
Stats 648.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2568 bytes_read=9173 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.5 sysload=0.10 cputime=32.899 memavail=643032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.9 pwm=0.000
Stats 649.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2574 bytes_read=9336 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002649  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.0 sysload=0.10 cputime=32.928 memavail=642892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.7 pwm=0.000
Stats 650.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2580 bytes_read=9513 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002652  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.6 sysload=0.10 cputime=32.954 memavail=642416 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.0 pwm=0.000
Stats 651.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2586 bytes_read=9661 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.0 sysload=0.41 cputime=32.980 memavail=642564 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.8 pwm=0.000
Stats 652.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2592 bytes_read=9824 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.0 sysload=0.41 cputime=33.007 memavail=642868 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.7 pwm=0.000
Stats 653.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2598 bytes_read=10015 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002650  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=30.4 sysload=0.41 cputime=33.027 memavail=642284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.2 pwm=0.000
Stats 654.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2604 bytes_read=10163 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.41 cputime=33.053 memavail=642024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.1 pwm=0.000
Stats 655.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2610 bytes_read=10326 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.2 sysload=0.41 cputime=33.080 memavail=642024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.0 pwm=0.000
Stats 656.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2616 bytes_read=10503 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=52.1 heater_bed: target=0 temp=18.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.38 cputime=33.108 memavail=642024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.5 pwm=0.000
Stats 657.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2622 bytes_read=10651 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.1 sysload=0.38 cputime=33.134 memavail=641800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.5 pwm=0.000
Stats 658.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2628 bytes_read=10828 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=52.1 heater_bed: target=0 temp=18.7 pwm=0.000 mcu_temp: temp=26.3 sysload=0.38 cputime=33.155 memavail=642980 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.3 pwm=0.000
Stats 659.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2634 bytes_read=11005 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.38 cputime=33.182 memavail=640764 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.0 pwm=0.000
Stats 660.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2640 bytes_read=11153 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.38 cputime=33.209 memavail=643016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.9 pwm=0.000
Stats 661.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2646 bytes_read=11316 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.35 cputime=33.236 memavail=642540 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.9 pwm=0.000
Stats 662.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2652 bytes_read=11493 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.9 sysload=0.35 cputime=33.265 memavail=642540 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.4 pwm=0.000
Stats 663.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2658 bytes_read=11641 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.35 cputime=33.285 memavail=642784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.4 pwm=0.000
Stats 664.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2664 bytes_read=11833 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.6 sysload=0.35 cputime=33.308 memavail=642532 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.3 pwm=0.000
Stats 665.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2670 bytes_read=11995 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.35 cputime=33.335 memavail=642376 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.1 pwm=0.000
Stats 666.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2676 bytes_read=12143 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.32 cputime=33.362 memavail=642376 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.1 pwm=0.000
Stats 667.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2682 bytes_read=12321 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.32 cputime=33.389 memavail=642376 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.0 pwm=0.000
Stats 668.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2688 bytes_read=12483 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.32 cputime=33.410 memavail=642876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.8 pwm=0.000
Stats 669.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2694 bytes_read=12645 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.7 sysload=0.32 cputime=33.436 memavail=639932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.7 pwm=0.000
Stats 670.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2700 bytes_read=12823 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=51.5 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.32 cputime=33.464 memavail=642608 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.8 pwm=0.000
Stats 671.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2706 bytes_read=12985 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.29 cputime=33.492 memavail=642384 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.5 pwm=0.000
Stats 672.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2712 bytes_read=13133 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=25.5 sysload=0.29 cputime=33.519 memavail=642384 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.7 pwm=0.000
Stats 673.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2718 bytes_read=13311 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.29 cputime=33.542 memavail=642832 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.6 pwm=0.000
Stats 674.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2724 bytes_read=13487 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=25.5 sysload=0.29 cputime=33.567 memavail=642328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.5 pwm=0.000
Stats 675.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2730 bytes_read=13635 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.29 cputime=33.595 memavail=642976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.3 pwm=0.000
Stats 676.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2736 bytes_read=13813 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=25.9 sysload=0.27 cputime=33.622 memavail=642580 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.4 pwm=0.000
Stats 677.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2742 bytes_read=13975 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.27 cputime=33.649 memavail=642580 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.4 pwm=0.000
Stats 678.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2748 bytes_read=14123 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.27 cputime=33.671 memavail=643060 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.4 pwm=0.000
Stats 679.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2754 bytes_read=14315 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.27 cputime=33.697 memavail=640844 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.6 pwm=0.000
Stats 680.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2760 bytes_read=14477 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.6 sysload=0.27 cputime=33.725 memavail=642816 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.3 pwm=0.000
Stats 681.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2766 bytes_read=14625 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.25 cputime=33.751 memavail=642796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.4 pwm=0.000
Stats 682.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2772 bytes_read=14790 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=52.1 heater_bed: target=0 temp=18.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.25 cputime=33.778 memavail=642588 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.5 pwm=0.000
Stats 683.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2778 bytes_read=14941 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.25 cputime=33.800 memavail=642876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.6 pwm=0.000
Stats 684.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2784 bytes_read=15093 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.8 sysload=0.25 cputime=33.825 memavail=642336 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.6 pwm=0.000
Stats 685.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2790 bytes_read=15261 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.6 sysload=0.25 cputime=33.855 memavail=642392 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.8 pwm=0.000
Stats 686.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2796 bytes_read=15423 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=31.8 sysload=0.23 cputime=33.884 memavail=642392 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.7 pwm=0.000
Stats 687.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2802 bytes_read=15571 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.23 cputime=33.911 memavail=642392 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.9 pwm=0.000
Stats 688.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2808 bytes_read=15749 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.23 cputime=33.935 memavail=643040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=132.0 pwm=0.000
Stats 689.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2814 bytes_read=15925 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.3 sysload=0.23 cputime=33.962 memavail=640600 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.0 pwm=0.000
Stats 690.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2820 bytes_read=16073 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=30.3 sysload=0.23 cputime=33.989 memavail=640348 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.1 pwm=0.000
Stats 691.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2826 bytes_read=16251 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.21 cputime=34.017 memavail=640348 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.2 pwm=0.000
Stats 692.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2832 bytes_read=16415 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.7 sysload=0.21 cputime=34.045 memavail=643580 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.3 pwm=0.000
Stats 693.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2838 bytes_read=16566 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.21 cputime=34.066 memavail=642364 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.5 pwm=0.000
Stats 694.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2844 bytes_read=16761 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.21 cputime=34.091 memavail=641928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.7 pwm=0.000
Stats 695.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2850 bytes_read=16927 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=52.1 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.2 sysload=0.21 cputime=34.119 memavail=641452 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.6 pwm=0.000
Stats 696.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2856 bytes_read=17078 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.19 cputime=34.146 memavail=642420 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.9 pwm=0.000
Stats 697.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2862 bytes_read=17259 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.19 cputime=34.173 memavail=642492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.1 pwm=0.000
Stats 698.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2868 bytes_read=17425 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.8 sysload=0.19 cputime=34.195 memavail=642640 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.0 pwm=0.000
Stats 699.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2874 bytes_read=17590 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.19 cputime=34.219 memavail=640648 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.3 pwm=0.000
Stats 700.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2880 bytes_read=17771 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.19 cputime=34.247 memavail=642628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.5 pwm=0.000
Stats 701.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2886 bytes_read=17937 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.18 cputime=34.275 memavail=642124 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.5 pwm=0.000
Stats 702.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2892 bytes_read=18088 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.4 sysload=0.18 cputime=34.301 memavail=642124 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.9 pwm=0.000
Stats 703.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2898 bytes_read=18269 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=25.6 sysload=0.18 cputime=34.323 memavail=643036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.2 pwm=0.000
Stats 704.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2904 bytes_read=18449 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.4 sysload=0.18 cputime=34.349 memavail=642556 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.1 pwm=0.000
Stats 705.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2916 bytes_read=18616 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=34.376 memavail=642556 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.4 pwm=0.000
Stats 706.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2922 bytes_read=18797 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.4 sysload=0.16 cputime=34.403 memavail=642556 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.6 pwm=0.000
Stats 707.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2928 bytes_read=18963 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=52.1 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=34.430 memavail=642304 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.8 pwm=0.000
Stats 708.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2934 bytes_read=19114 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.2 sysload=0.16 cputime=34.451 memavail=643032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.1 pwm=0.000
Stats 709.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2940 bytes_read=19309 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.16 cputime=34.476 memavail=640312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.2 pwm=0.000
Stats 710.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2946 bytes_read=19475 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=34.503 memavail=643040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.5 pwm=0.000
Stats 711.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2952 bytes_read=19626 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.23 cputime=34.528 memavail=642564 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.7 pwm=0.000
Stats 712.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2958 bytes_read=19807 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.5 sysload=0.23 cputime=34.555 memavail=643416 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.2 pwm=0.000
Stats 713.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2964 bytes_read=19973 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=52.1 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.23 cputime=34.575 memavail=642840 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.2 pwm=0.000
Stats 714.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2970 bytes_read=20138 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.23 cputime=34.599 memavail=642360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.5 pwm=0.000
Stats 715.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2976 bytes_read=20319 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=32.7 sysload=0.23 cputime=34.626 memavail=642360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.0 pwm=0.000
Stats 716.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2982 bytes_read=20485 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.21 cputime=34.654 memavail=642360 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.0 pwm=0.000
Stats 717.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2988 bytes_read=20636 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.21 cputime=34.679 memavail=642108 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.4 pwm=0.000
Stats 718.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2994 bytes_read=20817 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.1 sysload=0.21 cputime=34.700 memavail=642976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.8 pwm=0.000
Stats 719.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3000 bytes_read=20997 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.21 cputime=34.724 memavail=642752 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.9 pwm=0.000
Stats 720.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3006 bytes_read=21148 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.3 sysload=0.21 cputime=34.750 memavail=638792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.2 pwm=0.000
Stats 721.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3012 bytes_read=21344 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.0 sysload=0.19 cputime=34.778 memavail=638856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.3 pwm=0.000
Stats 722.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3018 bytes_read=21495 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.19 cputime=34.804 memavail=638856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.7 pwm=0.000
Stats 723.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3024 bytes_read=21646 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.1 sysload=0.19 cputime=34.823 memavail=642964 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.0 pwm=0.000
Stats 724.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3030 bytes_read=21856 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.19 cputime=34.849 memavail=642484 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.2 pwm=0.000
Stats 725.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3036 bytes_read=22007 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.19 cputime=34.877 memavail=641728 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.7 pwm=0.000
Stats 726.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3042 bytes_read=22158 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.7 sysload=0.18 cputime=34.904 memavail=641728 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.1 pwm=0.000
Stats 727.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3048 bytes_read=22354 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.18 cputime=34.932 memavail=643768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.5 pwm=0.000
Stats 728.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3054 bytes_read=22505 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=26.7 sysload=0.18 cputime=34.952 memavail=643232 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.7 pwm=0.000
Stats 729.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3060 bytes_read=22670 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=34.978 memavail=642612 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.0 pwm=0.000
Stats 730.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3066 bytes_read=22866 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.18 cputime=35.007 memavail=642872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.4 pwm=0.000
Stats 731.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3072 bytes_read=23017 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=52.1 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=26.3 sysload=0.16 cputime=35.034 memavail=642392 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.0 pwm=0.000
Stats 732.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3078 bytes_read=23168 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.16 cputime=35.060 memavail=642988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.3 pwm=0.000
Stats 733.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3084 bytes_read=23364 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.16 cputime=35.083 memavail=642792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.4 pwm=0.000
Stats 734.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3090 bytes_read=23515 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.16 cputime=35.111 memavail=643012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.8 pwm=0.000
Stats 735.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3096 bytes_read=23680 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.16 cputime=35.139 memavail=642536 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.3 pwm=0.000
Stats 736.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3102 bytes_read=23876 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.15 cputime=35.169 memavail=642284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.6 pwm=0.000
Stats 737.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3108 bytes_read=24027 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.15 cputime=35.196 memavail=643332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.0 pwm=0.000
Stats 738.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3114 bytes_read=24178 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.5 sysload=0.15 cputime=35.216 memavail=643016 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.6 pwm=0.000
Stats 739.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3120 bytes_read=24374 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.7 sysload=0.15 cputime=35.244 memavail=642312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.8 pwm=0.000
Stats 740.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3126 bytes_read=24539 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=26.8 sysload=0.15 cputime=35.271 memavail=642720 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.2 pwm=0.000
Stats 741.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3132 bytes_read=24687 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.1 sysload=0.14 cputime=35.299 memavail=642492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.8 pwm=0.000
Stats 742.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3138 bytes_read=24870 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.14 cputime=35.328 memavail=641988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.1 pwm=0.000
Stats 743.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3144 bytes_read=25011 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.7 sysload=0.14 cputime=35.348 memavail=642968 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.6 pwm=0.000
Stats 744.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3150 bytes_read=25166 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.14 cputime=35.374 memavail=642492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.0 pwm=0.000
Stats 745.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3156 bytes_read=25356 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.9 sysload=0.14 cputime=35.403 memavail=642744 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.3 pwm=0.000
Stats 746.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3162 bytes_read=25507 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.13 cputime=35.433 memavail=642492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.7 pwm=0.000
Stats 747.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3168 bytes_read=25673 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.13 cputime=35.459 memavail=643764 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.3 pwm=0.000
Stats 748.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3174 bytes_read=25854 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.13 cputime=35.480 memavail=643004 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.3 pwm=0.000
Stats 749.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3180 bytes_read=26005 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.13 cputime=35.505 memavail=642744 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.0 pwm=0.000
Stats 750.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3186 bytes_read=26185 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.13 cputime=35.534 memavail=643020 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.5 pwm=0.000
Stats 751.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3192 bytes_read=26366 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.5 sysload=0.12 cputime=35.564 memavail=642768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.0 pwm=0.000
Stats 752.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3198 bytes_read=26517 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.4 sysload=0.12 cputime=35.591 memavail=642768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.2 pwm=0.000
Stats 753.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3204 bytes_read=26683 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.12 cputime=35.612 memavail=643348 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.1 pwm=0.000
Stats 754.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3210 bytes_read=26864 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.12 cputime=35.637 memavail=642716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.4 pwm=0.000
Stats 755.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3216 bytes_read=27029 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.9 sysload=0.12 cputime=35.664 memavail=642716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.9 pwm=0.000
Stats 756.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3222 bytes_read=27195 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.11 cputime=35.691 memavail=642716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.4 pwm=0.000
Stats 757.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3228 bytes_read=27376 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.11 cputime=35.719 memavail=643032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.7 pwm=0.000
Stats 758.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3234 bytes_read=27527 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.11 cputime=35.739 memavail=642792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.5 pwm=0.000
Stats 759.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3240 bytes_read=27693 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=51.5 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.4 sysload=0.11 cputime=35.765 memavail=642288 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.9 pwm=0.000
Stats 760.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3246 bytes_read=27888 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.11 cputime=35.789 memavail=635060 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.4 pwm=0.000
Stats 761.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3252 bytes_read=28039 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.10 cputime=35.807 memavail=639192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.6 pwm=0.000
Stats 762.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3258 bytes_read=28205 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.10 cputime=35.835 memavail=643380 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.4 pwm=0.000
Stats 763.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3264 bytes_read=28386 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.10 cputime=35.855 memavail=642832 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.8 pwm=0.000
Stats 764.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3270 bytes_read=28537 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.10 cputime=35.881 memavail=642580 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.6 pwm=0.000
Stats 765.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3282 bytes_read=28717 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=342 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.10 cputime=35.909 memavail=642828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.1 pwm=0.000
Stats 766.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3288 bytes_read=28914 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.09 cputime=35.937 memavail=642328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.3 pwm=0.000
Stats 767.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3294 bytes_read=29065 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.5 sysload=0.09 cputime=35.964 memavail=642108 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.9 pwm=0.000
Stats 768.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3300 bytes_read=29231 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=35.984 memavail=643008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.3 pwm=0.000
Stats 769.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3306 bytes_read=29412 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.6 sysload=0.09 cputime=36.010 memavail=642308 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.9 pwm=0.000
Stats 770.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3312 bytes_read=29577 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=52.6 heater_bed: target=0 temp=18.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.09 cputime=36.038 memavail=640584 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.6 pwm=0.000
Stats 771.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3318 bytes_read=29758 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.5 sysload=0.08 cputime=36.067 memavail=640584 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.8 pwm=0.000
Stats 772.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3324 bytes_read=29924 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.08 cputime=36.097 memavail=643460 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.3 pwm=0.000
Stats 773.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3330 bytes_read=30075 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.08 cputime=36.117 memavail=643008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.0 pwm=0.000
Stats 774.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3336 bytes_read=30256 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.2 sysload=0.08 cputime=36.144 memavail=642280 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.6 pwm=0.000
Stats 775.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3342 bytes_read=30436 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.08 cputime=36.173 memavail=642784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.2 pwm=0.000
Stats 776.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3348 bytes_read=30587 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.7 sysload=0.08 cputime=36.202 memavail=642532 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.5 pwm=0.000
Stats 777.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3354 bytes_read=30768 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.3 sysload=0.08 cputime=36.230 memavail=643328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.5 pwm=0.000
Stats 778.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3360 bytes_read=30934 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.08 cputime=36.251 memavail=643012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.5 pwm=0.000
Stats 779.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3366 bytes_read=31085 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.08 cputime=36.278 memavail=642796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.4 pwm=0.000
Stats 780.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3372 bytes_read=31280 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.2 sysload=0.08 cputime=36.305 memavail=642740 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
Stats 781.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3378 bytes_read=31446 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.07 cputime=36.333 memavail=642264 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.6 pwm=0.000
Stats 782.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3384 bytes_read=31597 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.8 sysload=0.07 cputime=36.360 memavail=643324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.9 pwm=0.000
Stats 783.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3390 bytes_read=31778 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=25.3 sysload=0.07 cputime=36.379 memavail=642952 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.6 pwm=0.000
Stats 784.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3396 bytes_read=31944 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.07 cputime=36.401 memavail=642700 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.2 pwm=0.000
Stats 785.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3402 bytes_read=32109 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.5 sysload=0.07 cputime=36.427 memavail=643144 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.0 pwm=0.000
Stats 786.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3408 bytes_read=32290 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.06 cputime=36.454 memavail=642640 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.7 pwm=0.000
Stats 787.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3414 bytes_read=32456 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.06 cputime=36.481 memavail=642640 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.1 pwm=0.000
Stats 788.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3420 bytes_read=32607 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.06 cputime=36.502 memavail=643368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.4 pwm=0.000
Stats 789.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3426 bytes_read=32788 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.06 cputime=36.526 memavail=642892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.0 pwm=0.000
Stats 790.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3432 bytes_read=32968 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.06 cputime=36.553 memavail=640932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000
Stats 791.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3438 bytes_read=33119 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=26.0 sysload=0.06 cputime=36.579 memavail=640932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.4 pwm=0.000
Stats 792.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3444 bytes_read=33300 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.06 cputime=36.607 memavail=640680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.9 pwm=0.000
Stats 793.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3450 bytes_read=33466 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.3 sysload=0.06 cputime=36.629 memavail=643140 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 794.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3456 bytes_read=33617 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.06 cputime=36.653 memavail=642888 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.3 pwm=0.000
Stats 795.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3462 bytes_read=33812 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.06 cputime=36.681 memavail=642964 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.2 pwm=0.000
Stats 796.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3468 bytes_read=33978 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.05 cputime=36.707 memavail=642712 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.6 pwm=0.000
Stats 797.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3474 bytes_read=34129 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.7 sysload=0.05 cputime=36.733 memavail=642460 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.3 pwm=0.000
Stats 798.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3480 bytes_read=34310 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.05 cputime=36.755 memavail=643192 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=66.0 pwm=0.000
Stats 799.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3486 bytes_read=34476 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.05 cputime=36.781 memavail=642716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.5 pwm=0.000
Stats 800.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3492 bytes_read=34641 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.05 cputime=36.809 memavail=642972 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.3 pwm=0.000
Stats 801.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3498 bytes_read=34814 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.13 cputime=36.837 memavail=642716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.6 pwm=0.000
Stats 802.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3504 bytes_read=34969 bytes_retransmit=9 bytes_invalid=0 send_seq=380 receive_seq=380 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.8 sysload=0.13 cputime=36.866 memavail=641996 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000
Stats 803.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3510 bytes_read=35110 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.13 cputime=36.886 memavail=642976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.0 pwm=0.000
Stats 804.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3516 bytes_read=35280 bytes_retransmit=9 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.7 sysload=0.13 cputime=36.914 memavail=642716 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000
Stats 805.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3522 bytes_read=35460 bytes_retransmit=9 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=26.7 sysload=0.13 cputime=36.942 memavail=642492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.3 pwm=0.000
Stats 806.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3528 bytes_read=35611 bytes_retransmit=9 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.9 sysload=0.20 cputime=36.970 memavail=642492 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.0 pwm=0.000
Stats 807.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3534 bytes_read=35792 bytes_retransmit=9 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.20 cputime=37.000 memavail=643516 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.5 pwm=0.000
Stats 808.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3540 bytes_read=35958 bytes_retransmit=9 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.1 sysload=0.20 cputime=37.021 memavail=642976 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=62.1 pwm=0.000
Stats 809.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3546 bytes_read=36109 bytes_retransmit=9 bytes_invalid=0 send_seq=387 receive_seq=387 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.2 sysload=0.20 cputime=37.045 memavail=642972 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.9 pwm=0.000
Stats 810.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3552 bytes_read=36304 bytes_retransmit=9 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.20 cputime=37.072 memavail=642732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.6 pwm=0.000
Stats 811.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3558 bytes_read=36470 bytes_retransmit=9 bytes_invalid=0 send_seq=389 receive_seq=389 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.26 cputime=37.099 memavail=642828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=61.2 pwm=0.000
Stats 812.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3564 bytes_read=36621 bytes_retransmit=9 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.26 cputime=37.124 memavail=642100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.8 pwm=0.000
Stats 813.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3570 bytes_read=36802 bytes_retransmit=9 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.26 cputime=37.145 memavail=642828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=60.3 pwm=0.000
Stats 814.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3576 bytes_read=36968 bytes_retransmit=9 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.8 sysload=0.26 cputime=37.170 memavail=642604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000
Stats 815.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3582 bytes_read=37133 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.4 sysload=0.26 cputime=37.195 memavail=642100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.8 pwm=0.000
Stats 816.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3588 bytes_read=37329 bytes_retransmit=9 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=25.0 sysload=0.32 cputime=37.223 memavail=642104 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.4 pwm=0.000
Stats 817.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3594 bytes_read=37480 bytes_retransmit=9 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.32 cputime=37.249 memavail=641852 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.1 pwm=0.000
Stats 818.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3600 bytes_read=37631 bytes_retransmit=9 bytes_invalid=0 send_seq=396 receive_seq=396 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.32 cputime=37.268 memavail=642968 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=59.5 pwm=0.000
Stats 819.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3606 bytes_read=37827 bytes_retransmit=9 bytes_invalid=0 send_seq=397 receive_seq=397 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=25.4 sysload=0.32 cputime=37.297 memavail=642488 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 820.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3612 bytes_read=37978 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.4 sysload=0.32 cputime=37.325 memavail=642968 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.3 pwm=0.000
Stats 821.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3618 bytes_read=38143 bytes_retransmit=9 bytes_invalid=0 send_seq=399 receive_seq=399 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.30 cputime=37.353 memavail=642968 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=58.2 pwm=0.000
Stats 822.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3624 bytes_read=38339 bytes_retransmit=9 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.9 sysload=0.30 cputime=37.382 memavail=643944 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.7 pwm=0.000
Stats 823.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3630 bytes_read=38490 bytes_retransmit=9 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.3 sysload=0.30 cputime=37.402 memavail=643184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=57.5 pwm=0.000
Stats 824.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3636 bytes_read=38641 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=25.9 sysload=0.30 cputime=37.427 memavail=642924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.8 pwm=0.000
Stats 825.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3642 bytes_read=38837 bytes_retransmit=9 bytes_invalid=0 send_seq=403 receive_seq=403 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.30 cputime=37.455 memavail=642980 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.7 pwm=0.000
Stats 826.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3654 bytes_read=39018 bytes_retransmit=9 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.27 cputime=37.482 memavail=642504 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.4 pwm=0.000
Stats 827.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3660 bytes_read=39169 bytes_retransmit=9 bytes_invalid=0 send_seq=406 receive_seq=406 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.0 sysload=0.27 cputime=37.507 memavail=642552 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=56.0 pwm=0.000
Stats 828.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3666 bytes_read=39365 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.27 cputime=37.526 memavail=642816 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.9 pwm=0.000
Stats 829.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3672 bytes_read=39516 bytes_retransmit=9 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.0 sysload=0.27 cputime=37.551 memavail=642592 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.8 pwm=0.000
Stats 830.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3678 bytes_read=39667 bytes_retransmit=9 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.6 sysload=0.27 cputime=37.578 memavail=640624 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=55.3 pwm=0.000
Stats 831.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3684 bytes_read=39877 bytes_retransmit=9 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.0 sysload=0.25 cputime=37.608 memavail=640624 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 832.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3690 bytes_read=40028 bytes_retransmit=9 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.25 cputime=37.635 memavail=640628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.6 pwm=0.000
Stats 833.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3696 bytes_read=40179 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=23.1 sysload=0.25 cputime=37.654 memavail=643012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=54.8 pwm=0.000
Stats 834.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3702 bytes_read=40375 bytes_retransmit=9 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.25 cputime=37.681 memavail=642760 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.9 pwm=0.000
Stats 835.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3708 bytes_read=40526 bytes_retransmit=9 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.25 cputime=37.707 memavail=642536 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 836.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3714 bytes_read=40691 bytes_retransmit=9 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=52.1 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.23 cputime=37.734 memavail=643012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.7 pwm=0.000
Stats 837.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3720 bytes_read=40887 bytes_retransmit=9 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.23 cputime=37.763 memavail=642284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=53.4 pwm=0.000
Stats 838.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3726 bytes_read=41038 bytes_retransmit=9 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.23 cputime=37.783 memavail=642784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 839.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3732 bytes_read=41189 bytes_retransmit=9 bytes_invalid=0 send_seq=418 receive_seq=418 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.23 cputime=37.810 memavail=641552 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.9 pwm=0.000
Stats 840.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3738 bytes_read=41385 bytes_retransmit=9 bytes_invalid=0 send_seq=419 receive_seq=419 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.23 cputime=37.840 memavail=642816 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.5 pwm=0.000
Stats 841.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3744 bytes_read=41550 bytes_retransmit=9 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.21 cputime=37.867 memavail=642708 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.8 pwm=0.000
Stats 842.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3750 bytes_read=41701 bytes_retransmit=9 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.3 sysload=0.21 cputime=37.896 memavail=643244 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=52.3 pwm=0.000
Stats 843.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3756 bytes_read=41897 bytes_retransmit=9 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.21 cputime=37.916 memavail=642876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.7 pwm=0.000
Stats 844.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3762 bytes_read=42048 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=27.2 sysload=0.21 cputime=37.944 memavail=642460 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.8 pwm=0.000
Stats 845.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3768 bytes_read=42214 bytes_retransmit=9 bytes_invalid=0 send_seq=424 receive_seq=424 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.21 cputime=37.973 memavail=643228 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.4 pwm=0.000
Stats 846.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3774 bytes_read=42409 bytes_retransmit=9 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=26.4 sysload=0.27 cputime=38.003 memavail=642752 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=51.0 pwm=0.000
Stats 847.8: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3780 bytes_read=42560 bytes_retransmit=9 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.27 cputime=38.031 memavail=642848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=50.5 pwm=0.000
Stats 1143.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=5593 bytes_read=92248 bytes_retransmit=9 bytes_invalid=0 send_seq=727 receive_seq=727 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.4 sysload=0.52 cputime=45.381 memavail=642108 print_time=519.882 buffer_time=0.048 print_stall=0 extruder: target=0 temp=29.7 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1965840560: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:24:04 2024 (1713288244.8 1144.3)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.8
stealthchop_threshold = 999999
step_pulse_duration = 0.000002

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
Config error
Traceback (most recent call last):
  File "/home/philipp/klipper/klippy/klippy.py", line 175, in _connect
    self._read_config()
  File "/home/philipp/klipper/klippy/klippy.py", line 145, in _read_config
    pconfig.check_unused_options(config)
  File "/home/philipp/klipper/klippy/configfile.py", line 308, in check_unused_options
    raise error("Option '%s' is not valid in section '%s'"
configparser.Error: Option 'step_pulse_duration' is not valid in section 'tmc2209 extruder'
webhooks client 1965823336: New connection
webhooks client 1965823336: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Unable to issue reset command on MCU 'mcu'
webhooks client 1965823336: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:24:49 2024 (1713288289.6 1189.1)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.000002
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.8
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1966111160: New connection
webhooks client 1966111160: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1194.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2416 bytes_read=5710 bytes_retransmit=0 bytes_invalid=0 send_seq=200 receive_seq=199 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003463  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.4 sysload=0.56 cputime=50.734 memavail=638140 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.9 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1966111160
webhooks: registering remote method 'reboot_machine' for connection id: 1966111160
webhooks: registering remote method 'pause_job_queue' for connection id: 1966111160
webhooks: registering remote method 'start_job_queue' for connection id: 1966111160
Stats 1195.2: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2422 bytes_read=5911 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=201 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002573  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=24.3 sysload=0.56 cputime=50.791 memavail=638656 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 1196.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000036 bytes_write=2428 bytes_read=6077 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=202 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002746  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.8 sysload=0.56 cputime=50.866 memavail=640056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=30.5 pwm=0.000
Stats 1197.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000036 bytes_write=2434 bytes_read=6228 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002793  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=26.7 sysload=0.56 cputime=50.896 memavail=639804 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.0 pwm=0.000
Stats 1198.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000036 bytes_write=2440 bytes_read=6424 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003397  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.8 sysload=0.60 cputime=50.926 memavail=639840 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.6 pwm=0.000
Stats 1199.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000036 bytes_write=2446 bytes_read=6575 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003050  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.9 sysload=0.60 cputime=50.953 memavail=640548 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=28.6 pwm=0.000
Stats 1200.2: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000036 bytes_write=2452 bytes_read=6741 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002850  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=25.6 sysload=0.60 cputime=50.978 memavail=640996 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.2 pwm=0.000
Stats 1201.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2458 bytes_read=6936 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002898  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.3 sysload=0.60 cputime=50.998 memavail=637368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.5 pwm=0.000
Stats 1202.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2464 bytes_read=7087 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002798  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.60 cputime=51.024 memavail=636920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.3 pwm=0.000
Stats 1203.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2470 bytes_read=7253 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002744  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.79 cputime=51.049 memavail=636472 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=29.4 pwm=0.000
Heater extruder approaching new target of 200.000
Stats 1204.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2476 bytes_read=7430 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.2 sysload=0.79 cputime=51.080 memavail=636248 print_time=58.893 buffer_time=0.130 print_stall=0 extruder: target=200 temp=29.1 pwm=1.000
Stats 1205.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2513 bytes_read=7581 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=53.2 heater_bed: target=0 temp=18.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.79 cputime=51.107 memavail=642092 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=28.8 pwm=1.000
Stats 1206.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2519 bytes_read=7750 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.2 sysload=0.79 cputime=51.128 memavail=641260 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=29.1 pwm=1.000
Stats 1207.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2525 bytes_read=7919 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.5 sysload=0.79 cputime=51.154 memavail=640784 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=30.7 pwm=1.000
Stats 1208.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2531 bytes_read=8066 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.1 sysload=0.89 cputime=51.181 memavail=640532 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=30.5 pwm=1.000
Stats 1209.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2553 bytes_read=8237 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002778  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.8 sysload=0.89 cputime=51.209 memavail=640308 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=31.2 pwm=1.000
Stats 1210.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2565 bytes_read=8434 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002805  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=25.9 sysload=0.89 cputime=51.236 memavail=642492 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=31.8 pwm=1.000
Stats 1211.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2571 bytes_read=8599 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002771  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.1 sysload=0.89 cputime=51.258 memavail=641696 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=33.9 pwm=1.000
Stats 1212.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2577 bytes_read=8765 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002744  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.0 sysload=0.89 cputime=51.286 memavail=641472 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=34.7 pwm=1.000
Stats 1213.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2599 bytes_read=8951 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.90 cputime=51.314 memavail=641220 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=36.3 pwm=1.000
Stats 1214.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2605 bytes_read=9102 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.3 sysload=0.90 cputime=51.340 memavail=641412 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=38.4 pwm=1.000
Stats 1215.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2611 bytes_read=9268 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.7 sysload=0.90 cputime=51.366 memavail=642328 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=40.4 pwm=1.000
Stats 1216.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2617 bytes_read=9463 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.4 sysload=0.90 cputime=51.389 memavail=641332 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=42.5 pwm=1.000
Stats 1217.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2639 bytes_read=9619 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.90 cputime=51.417 memavail=640884 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=44.4 pwm=1.000
Stats 1218.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2645 bytes_read=9785 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.1 sysload=0.82 cputime=51.442 memavail=640892 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=46.2 pwm=1.000
Stats 1219.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2651 bytes_read=9966 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.82 cputime=51.469 memavail=640668 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=49.3 pwm=1.000
Stats 1220.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2657 bytes_read=10117 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.5 sysload=0.82 cputime=51.493 memavail=642176 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=50.9 pwm=1.000
Stats 1221.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2679 bytes_read=10302 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.9 sysload=0.82 cputime=51.512 memavail=641384 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=52.9 pwm=1.000
Stats 1222.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2685 bytes_read=10483 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.82 cputime=51.539 memavail=640684 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=56.1 pwm=1.000
Stats 1223.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2691 bytes_read=10634 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.76 cputime=51.568 memavail=640012 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=58.2 pwm=1.000
Stats 1224.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2697 bytes_read=10800 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.9 sysload=0.76 cputime=51.597 memavail=639288 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=60.3 pwm=1.000
Stats 1225.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2703 bytes_read=10981 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.1 sysload=0.76 cputime=51.624 memavail=641756 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=63.0 pwm=1.000
Stats 1226.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2725 bytes_read=11151 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.76 cputime=51.645 memavail=641080 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=65.2 pwm=1.000
Stats 1227.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2731 bytes_read=11317 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.0 sysload=0.76 cputime=51.671 memavail=640380 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=67.0 pwm=1.000
Stats 1228.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2737 bytes_read=11498 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.70 cputime=51.698 memavail=639932 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=69.7 pwm=1.000
Stats 1229.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2743 bytes_read=11649 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=26.7 sysload=0.70 cputime=51.725 memavail=641356 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=71.6 pwm=1.000
Stats 1230.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2765 bytes_read=11820 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.70 cputime=51.751 memavail=641520 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=73.7 pwm=1.000
Stats 1231.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2771 bytes_read=12015 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.70 cputime=51.772 memavail=641324 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=76.5 pwm=1.000
Stats 1232.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2777 bytes_read=12166 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.70 cputime=51.799 memavail=640652 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=78.5 pwm=1.000
Stats 1233.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2783 bytes_read=12332 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.0 sysload=0.64 cputime=51.825 memavail=640428 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=80.5 pwm=1.000
Stats 1234.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2805 bytes_read=12518 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.4 sysload=0.64 cputime=51.853 memavail=640936 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=83.0 pwm=1.000
Stats 1235.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2811 bytes_read=12669 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=26.1 sysload=0.64 cputime=51.880 memavail=641424 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=84.9 pwm=1.000
Stats 1236.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2817 bytes_read=12849 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.64 cputime=51.900 memavail=641124 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=86.9 pwm=1.000
Stats 1237.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2823 bytes_read=13030 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.64 cputime=51.928 memavail=641332 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=89.2 pwm=1.000
Stats 1238.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2845 bytes_read=13186 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.59 cputime=51.958 memavail=640632 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=91.2 pwm=1.000
Stats 1239.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2851 bytes_read=13352 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=26.7 sysload=0.59 cputime=51.987 memavail=640408 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=93.1 pwm=1.000
Stats 1240.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2857 bytes_read=13533 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.59 cputime=52.019 memavail=642204 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=95.6 pwm=1.000
Stats 1241.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2863 bytes_read=13684 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.59 cputime=52.039 memavail=641568 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=97.3 pwm=1.000
Stats 1242.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2885 bytes_read=13869 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.3 sysload=0.59 cputime=52.069 memavail=641120 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=99.2 pwm=1.000
Stats 1243.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2891 bytes_read=14050 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.54 cputime=52.095 memavail=633624 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=101.5 pwm=1.000
Stats 1244.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2897 bytes_read=14201 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.54 cputime=52.115 memavail=640796 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=103.0 pwm=1.000
Stats 1245.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2903 bytes_read=14367 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.1 sysload=0.54 cputime=52.140 memavail=640932 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=105.0 pwm=1.000
Stats 1246.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2925 bytes_read=14553 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=26.0 sysload=0.54 cputime=52.163 memavail=639952 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=107.2 pwm=1.000
Stats 1247.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2931 bytes_read=14718 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=24.6 sysload=0.54 cputime=52.192 memavail=640672 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=108.8 pwm=1.000
Stats 1248.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2937 bytes_read=14899 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.50 cputime=52.221 memavail=640808 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=110.6 pwm=1.000
Stats 1249.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2943 bytes_read=15065 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.3 sysload=0.50 cputime=52.251 memavail=640136 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=112.8 pwm=1.000
Stats 1250.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2949 bytes_read=15216 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.2 sysload=0.50 cputime=52.280 memavail=642356 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=114.3 pwm=1.000
Stats 1251.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2971 bytes_read=15402 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.0 sysload=0.50 cputime=52.301 memavail=641668 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=116.0 pwm=1.000
Stats 1252.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2977 bytes_read=15582 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.50 cputime=52.329 memavail=641444 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=118.2 pwm=1.000
Stats 1253.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2983 bytes_read=15733 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.46 cputime=52.357 memavail=641424 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=119.7 pwm=1.000
Stats 1254.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2989 bytes_read=15914 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.46 cputime=52.385 memavail=640500 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=121.3 pwm=1.000
Stats 1255.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3011 bytes_read=16085 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.3 sysload=0.46 cputime=52.412 memavail=641792 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=123.5 pwm=1.000
Stats 1256.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3017 bytes_read=16236 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.46 cputime=52.432 memavail=640896 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=124.9 pwm=1.000
Stats 1257.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3023 bytes_read=16431 bytes_retransmit=0 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.46 cputime=52.459 memavail=641228 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=126.5 pwm=1.000
Stats 1258.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3029 bytes_read=16597 bytes_retransmit=0 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=28.7 sysload=0.42 cputime=52.486 memavail=641004 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=128.5 pwm=1.000
Stats 1259.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3051 bytes_read=16750 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.42 cputime=52.511 memavail=640556 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=130.0 pwm=1.000
Stats 1260.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3057 bytes_read=16928 bytes_retransmit=0 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.2 sysload=0.42 cputime=52.538 memavail=640904 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=131.4 pwm=1.000
Stats 1261.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3063 bytes_read=17090 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.42 cputime=52.558 memavail=640516 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=133.4 pwm=1.000
Stats 1262.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3069 bytes_read=17252 bytes_retransmit=0 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.0 sysload=0.42 cputime=52.583 memavail=639508 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=134.9 pwm=1.000
Stats 1263.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3091 bytes_read=17435 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.39 cputime=52.611 memavail=640588 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=136.3 pwm=1.000
Stats 1264.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3097 bytes_read=17589 bytes_retransmit=0 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.39 cputime=52.640 memavail=640084 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=138.2 pwm=1.000
Stats 1265.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3103 bytes_read=17727 bytes_retransmit=0 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=26.0 sysload=0.39 cputime=52.667 memavail=641200 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=139.6 pwm=1.000
Stats 1266.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3109 bytes_read=17893 bytes_retransmit=0 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.5 sysload=0.39 cputime=52.689 memavail=640528 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=140.9 pwm=1.000
Stats 1267.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3131 bytes_read=18063 bytes_retransmit=0 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.39 cputime=52.717 memavail=639604 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=142.7 pwm=1.000
Stats 1268.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3137 bytes_read=18210 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.5 sysload=0.52 cputime=52.744 memavail=639380 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=144.1 pwm=1.000
Stats 1269.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3143 bytes_read=18388 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.52 cputime=52.771 memavail=642116 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=145.5 pwm=1.000
Stats 1270.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3149 bytes_read=18550 bytes_retransmit=0 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.52 cputime=52.796 memavail=642380 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=147.3 pwm=1.000
Stats 1271.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3161 bytes_read=18714 bytes_retransmit=0 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.8 sysload=0.52 cputime=52.819 memavail=641128 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=148.6 pwm=1.000
Stats 1272.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3183 bytes_read=18911 bytes_retransmit=0 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.9 sysload=0.52 cputime=52.848 memavail=640428 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=150.0 pwm=1.000
Stats 1273.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3189 bytes_read=19073 bytes_retransmit=0 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.47 cputime=52.874 memavail=641376 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=151.7 pwm=1.000
Stats 1274.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3195 bytes_read=19221 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.2 sysload=0.47 cputime=52.901 memavail=640676 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=153.0 pwm=1.000
Stats 1275.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3201 bytes_read=19399 bytes_retransmit=0 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.47 cputime=52.928 memavail=641984 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=154.3 pwm=1.000
Stats 1276.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3223 bytes_read=19566 bytes_retransmit=0 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.47 cputime=52.948 memavail=641504 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=156.1 pwm=1.000
Stats 1277.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3229 bytes_read=19728 bytes_retransmit=0 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=0 srtt=0.004 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.47 cputime=52.975 memavail=640880 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=157.2 pwm=1.000
Stats 1278.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3235 bytes_read=19906 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.44 cputime=53.001 memavail=640408 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=158.5 pwm=1.000
Stats 1279.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3241 bytes_read=20068 bytes_retransmit=0 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=29.4 sysload=0.44 cputime=53.028 memavail=639960 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=159.9 pwm=1.000
Stats 1280.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3263 bytes_read=20221 bytes_retransmit=0 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.3 sysload=0.44 cputime=53.052 memavail=641436 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=161.4 pwm=1.000
Stats 1281.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3269 bytes_read=20399 bytes_retransmit=0 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.44 cputime=53.073 memavail=638748 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=162.6 pwm=1.000
Stats 1282.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3275 bytes_read=20575 bytes_retransmit=0 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.44 cputime=53.101 memavail=638300 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=164.2 pwm=1.000
Stats 1283.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3281 bytes_read=20723 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.2 sysload=0.40 cputime=53.127 memavail=637852 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=165.5 pwm=1.000
Stats 1284.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3303 bytes_read=20906 bytes_retransmit=0 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=23.3 sysload=0.40 cputime=53.156 memavail=637404 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=166.6 pwm=1.000
Stats 1285.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3309 bytes_read=21068 bytes_retransmit=0 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.40 cputime=53.182 memavail=641944 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=168.2 pwm=1.000
Stats 1286.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3315 bytes_read=21216 bytes_retransmit=0 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.5 sysload=0.40 cputime=53.211 memavail=641248 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=169.3 pwm=1.000
Stats 1287.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3321 bytes_read=21408 bytes_retransmit=0 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.40 cputime=53.242 memavail=640708 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=170.5 pwm=1.000
Stats 1288.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3343 bytes_read=21575 bytes_retransmit=0 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.37 cputime=53.270 memavail=640864 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=172.0 pwm=1.000
Stats 1289.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3349 bytes_read=21723 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.37 cputime=53.297 memavail=640416 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=173.2 pwm=1.000
Stats 1290.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3355 bytes_read=21901 bytes_retransmit=0 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.6 sysload=0.37 cputime=53.322 memavail=641696 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=174.5 pwm=1.000
Stats 1291.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3361 bytes_read=22063 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=26.7 sysload=0.37 cputime=53.345 memavail=638624 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=176.0 pwm=1.000
Stats 1292.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3367 bytes_read=22225 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.1 sysload=0.37 cputime=53.371 memavail=638400 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.2 pwm=1.000
Stats 1293.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3389 bytes_read=22408 bytes_retransmit=0 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.8 sysload=0.34 cputime=53.399 memavail=637928 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.2 pwm=1.000
Stats 1294.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3395 bytes_read=22570 bytes_retransmit=0 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.6 sysload=0.34 cputime=53.426 memavail=637200 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.6 pwm=1.000
Stats 1295.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3401 bytes_read=22718 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.34 cputime=53.452 memavail=641384 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.7 pwm=1.000
Stats 1296.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3407 bytes_read=22896 bytes_retransmit=0 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.34 cputime=53.474 memavail=641488 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.8 pwm=1.000
Stats 1297.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3429 bytes_read=23077 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.0 sysload=0.34 cputime=53.502 memavail=641620 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.3 pwm=1.000
Stats 1298.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3467 bytes_read=23235 bytes_retransmit=0 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.31 cputime=53.530 memavail=641732 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.4 pwm=1.000
Stats 1299.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3489 bytes_read=23418 bytes_retransmit=0 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.31 cputime=53.557 memavail=641284 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=185.4 pwm=0.937
Stats 1300.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3527 bytes_read=23590 bytes_retransmit=0 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=26.8 sysload=0.31 cputime=53.583 memavail=642156 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.7 pwm=1.000
Stats 1301.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3549 bytes_read=23743 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.7 sysload=0.31 cputime=53.605 memavail=641440 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.9 pwm=0.830
Stats 1302.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3555 bytes_read=23935 bytes_retransmit=0 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.7 sysload=0.31 cputime=53.635 memavail=641216 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.0 pwm=0.830
Stats 1303.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3577 bytes_read=24102 bytes_retransmit=0 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.37 cputime=53.664 memavail=640460 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.1 pwm=0.767
Stats 1304.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3615 bytes_read=24260 bytes_retransmit=0 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.8 sysload=0.37 cputime=53.693 memavail=640460 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.2 pwm=0.762
Stats 1305.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3621 bytes_read=24438 bytes_retransmit=0 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.37 cputime=53.718 memavail=641464 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.0 pwm=0.762
Stats 1306.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3659 bytes_read=24610 bytes_retransmit=0 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.7 sysload=0.37 cputime=53.741 memavail=642196 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.0 pwm=0.745
Stats 1307.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3697 bytes_read=24782 bytes_retransmit=0 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.37 cputime=53.768 memavail=641272 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.0 pwm=0.539
Stats 1308.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3746 bytes_read=24984 bytes_retransmit=0 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.42 cputime=53.798 memavail=640580 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.8 pwm=0.593
Stats 1309.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3768 bytes_read=25137 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.4 sysload=0.42 cputime=53.823 memavail=640132 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.3 pwm=0.714
Heater extruder within range of 200.000
Stats 1310.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3790 bytes_read=25290 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.42 cputime=53.848 memavail=641724 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.9 pwm=0.619
Stats 1311.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3844 bytes_read=25497 bytes_retransmit=0 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.42 cputime=53.871 memavail=639340 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.5 pwm=0.640
Stats 1312.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3909 bytes_read=25674 bytes_retransmit=0 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.42 cputime=53.897 memavail=638892 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.9 pwm=0.688
Stats 1313.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3931 bytes_read=25827 bytes_retransmit=0 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.38 cputime=53.923 memavail=638892 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.4 pwm=0.585
Stats 1314.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3953 bytes_read=26024 bytes_retransmit=0 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.38 cputime=53.952 memavail=638444 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.675
Stats 1315.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3991 bytes_read=26182 bytes_retransmit=0 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=24.6 sysload=0.38 cputime=53.975 memavail=641808 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.0 pwm=0.689
Stats 1316.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3997 bytes_read=26330 bytes_retransmit=0 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.38 cputime=53.996 memavail=641296 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.2 pwm=0.689
Stats 1317.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4035 bytes_read=26546 bytes_retransmit=0 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.9 sysload=0.38 cputime=54.028 memavail=641292 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.635
Stats 1318.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4089 bytes_read=26709 bytes_retransmit=0 bytes_invalid=0 send_seq=382 receive_seq=382 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.35 cputime=54.058 memavail=641068 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.7 pwm=0.730
Stats 1319.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4106 bytes_read=26857 bytes_retransmit=0 bytes_invalid=0 send_seq=383 receive_seq=383 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.35 cputime=54.084 memavail=640816 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.614
Stats 1320.2: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4144 bytes_read=27059 bytes_retransmit=0 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=25.8 sysload=0.35 cputime=54.111 memavail=640648 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.664
Stats 1321.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4166 bytes_read=27212 bytes_retransmit=0 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.35 cputime=54.132 memavail=638684 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.664
Stats 1322.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4220 bytes_read=27389 bytes_retransmit=0 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.35 cputime=54.159 memavail=638236 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.523
Stats 1323.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4258 bytes_read=27588 bytes_retransmit=0 bytes_invalid=0 send_seq=395 receive_seq=395 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.32 cputime=54.188 memavail=640172 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.644
Stats 1324.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4296 bytes_read=27736 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.32 cputime=54.215 memavail=639948 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.627
Stats 1325.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4318 bytes_read=27879 bytes_retransmit=0 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.32 cputime=54.239 memavail=642072 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.563
Stats 1326.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4324 bytes_read=28058 bytes_retransmit=0 bytes_invalid=0 send_seq=401 receive_seq=401 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.32 cputime=54.260 memavail=641212 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.563
Stats 1327.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4362 bytes_read=28209 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.5 sysload=0.32 cputime=54.287 memavail=640260 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.583
Stats 1328.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4368 bytes_read=28371 bytes_retransmit=0 bytes_invalid=0 send_seq=405 receive_seq=405 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.9 sysload=0.30 cputime=54.314 memavail=640260 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.583
Stats 1329.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4422 bytes_read=28578 bytes_retransmit=0 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.8 sysload=0.30 cputime=54.343 memavail=641484 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.607
Stats 1330.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4476 bytes_read=28741 bytes_retransmit=0 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=25.2 sysload=0.30 cputime=54.366 memavail=641824 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.568
Stats 1331.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4514 bytes_read=28914 bytes_retransmit=0 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.9 sysload=0.30 cputime=54.386 memavail=639856 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.654
Stats 1332.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4542 bytes_read=29096 bytes_retransmit=0 bytes_invalid=0 send_seq=419 receive_seq=418 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.2 sysload=0.30 cputime=54.414 memavail=639408 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.593
Stats 1333.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4548 bytes_read=29274 bytes_retransmit=0 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.0 sysload=0.27 cputime=54.440 memavail=639184 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.593
Stats 1334.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4554 bytes_read=29437 bytes_retransmit=0 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.27 cputime=54.467 memavail=638736 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.593
Stats 1335.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4576 bytes_read=29619 bytes_retransmit=0 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.4 sysload=0.27 cputime=54.494 memavail=641764 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.455
Stats 1336.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4630 bytes_read=29782 bytes_retransmit=0 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.5 sysload=0.27 cputime=54.515 memavail=641060 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.605
Stats 1337.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4668 bytes_read=29955 bytes_retransmit=0 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.27 cputime=54.542 memavail=640612 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.668
Stats 1338.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4706 bytes_read=30156 bytes_retransmit=0 bytes_invalid=0 send_seq=433 receive_seq=433 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.8 sysload=0.25 cputime=54.569 memavail=640164 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.581
Stats 1339.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4755 bytes_read=30314 bytes_retransmit=0 bytes_invalid=0 send_seq=436 receive_seq=436 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=24.1 sysload=0.25 cputime=54.595 memavail=639940 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.590
Stats 1340.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4777 bytes_read=30482 bytes_retransmit=0 bytes_invalid=0 send_seq=438 receive_seq=438 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.4 sysload=0.25 cputime=54.625 memavail=641652 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.498
Stats 1341.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4799 bytes_read=30664 bytes_retransmit=0 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.25 cputime=54.646 memavail=639768 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.568
Stats 1342.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4837 bytes_read=30822 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.0 sysload=0.25 cputime=54.673 memavail=639544 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.533
Stats 1343.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4875 bytes_read=31009 bytes_retransmit=0 bytes_invalid=0 send_seq=446 receive_seq=446 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.23 cputime=54.700 memavail=638844 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.522
Stats 1344.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4929 bytes_read=31201 bytes_retransmit=0 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.0 sysload=0.23 cputime=54.730 memavail=638396 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.493
Stats 1345.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4983 bytes_read=31364 bytes_retransmit=0 bytes_invalid=0 send_seq=454 receive_seq=454 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.8 sysload=0.23 cputime=54.758 memavail=641556 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.555
Stats 1346.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5016 bytes_read=31532 bytes_retransmit=0 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.23 cputime=54.780 memavail=640868 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.544
Stats 1347.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5054 bytes_read=31719 bytes_retransmit=0 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.23 cputime=54.807 memavail=641280 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.576
Stats 1348.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5060 bytes_read=31881 bytes_retransmit=0 bytes_invalid=0 send_seq=460 receive_seq=460 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.8 sysload=0.29 cputime=54.833 memavail=641560 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.576
Stats 1349.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5114 bytes_read=32059 bytes_retransmit=0 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.29 cputime=54.861 memavail=640860 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.620
Stats 1350.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5136 bytes_read=32241 bytes_retransmit=0 bytes_invalid=0 send_seq=466 receive_seq=466 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.29 cputime=54.887 memavail=641496 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.562
Stats 1351.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5174 bytes_read=32399 bytes_retransmit=0 bytes_invalid=0 send_seq=469 receive_seq=469 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.7 sysload=0.29 cputime=54.908 memavail=640832 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.508
Stats 1352.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5196 bytes_read=32567 bytes_retransmit=0 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.3 sysload=0.29 cputime=54.936 memavail=640384 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.620
Stats 1353.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5218 bytes_read=32763 bytes_retransmit=0 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.6 sysload=0.27 cputime=54.965 memavail=639692 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.610
Stats 1354.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5272 bytes_read=32926 bytes_retransmit=0 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.27 cputime=54.991 memavail=639468 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.543
Stats 1355.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5294 bytes_read=33094 bytes_retransmit=0 bytes_invalid=0 send_seq=479 receive_seq=479 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.3 sysload=0.27 cputime=55.016 memavail=641904 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.663
Stats 1356.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5316 bytes_read=33276 bytes_retransmit=0 bytes_invalid=0 send_seq=481 receive_seq=481 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.27 cputime=55.040 memavail=641276 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.662
Stats 1357.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5354 bytes_read=33434 bytes_retransmit=0 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.27 cputime=55.068 memavail=640828 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.572
Stats 1358.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5376 bytes_read=33616 bytes_retransmit=0 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=25.9 sysload=0.25 cputime=55.095 memavail=640380 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.697
Stats 1359.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5414 bytes_read=33803 bytes_retransmit=0 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.25 cputime=55.121 memavail=639876 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.627
Stats 1360.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5468 bytes_read=33966 bytes_retransmit=0 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.6 sysload=0.25 cputime=55.146 memavail=642052 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.519
Stats 1361.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5490 bytes_read=34134 bytes_retransmit=0 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.25 cputime=55.168 memavail=641040 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.592
Stats 1362.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5496 bytes_read=34311 bytes_retransmit=0 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.25 cputime=55.195 memavail=641164 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.592
Stats 1363.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5550 bytes_read=34488 bytes_retransmit=0 bytes_invalid=0 send_seq=500 receive_seq=500 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.4 sysload=0.23 cputime=55.225 memavail=640492 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.537
Stats 1364.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5572 bytes_read=34656 bytes_retransmit=0 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.23 cputime=55.250 memavail=634516 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.606
Stats 1365.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5578 bytes_read=34833 bytes_retransmit=0 bytes_invalid=0 send_seq=503 receive_seq=503 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.23 cputime=55.275 memavail=641496 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.606
Stats 1366.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5616 bytes_read=34991 bytes_retransmit=0 bytes_invalid=0 send_seq=506 receive_seq=506 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.23 cputime=55.295 memavail=640764 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.648
Stats 1367.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5654 bytes_read=35164 bytes_retransmit=0 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.23 cputime=55.324 memavail=640064 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.597
Stats 1368.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5676 bytes_read=35360 bytes_retransmit=0 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.21 cputime=55.354 memavail=639616 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.448
Stats 1369.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5714 bytes_read=35518 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.6 sysload=0.21 cputime=55.382 memavail=638916 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.585
Stats 1370.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5736 bytes_read=35686 bytes_retransmit=0 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.2 sysload=0.21 cputime=55.410 memavail=641860 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.527
Stats 1371.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5769 bytes_read=35868 bytes_retransmit=0 bytes_invalid=0 send_seq=518 receive_seq=518 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.5 sysload=0.21 cputime=55.432 memavail=639668 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.615
Stats 1372.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5823 bytes_read=36031 bytes_retransmit=0 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.4 sysload=0.21 cputime=55.459 memavail=639668 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.603
Stats 1373.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5845 bytes_read=36213 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.1 sysload=0.19 cputime=55.485 memavail=639192 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.660
Stats 1374.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5899 bytes_read=36400 bytes_retransmit=0 bytes_invalid=0 send_seq=528 receive_seq=527 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=27.2 sysload=0.19 cputime=55.513 memavail=638744 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 1375.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5921 bytes_read=36558 bytes_retransmit=0 bytes_invalid=0 send_seq=530 receive_seq=530 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.19 cputime=55.537 memavail=641744 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.589
Stats 1376.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5927 bytes_read=36721 bytes_retransmit=0 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.2 sysload=0.19 cputime=55.558 memavail=641268 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.589
Stats 1377.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5965 bytes_read=36908 bytes_retransmit=0 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.6 sysload=0.19 cputime=55.586 memavail=641728 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.613
Stats 1378.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5998 bytes_read=37075 bytes_retransmit=0 bytes_invalid=0 send_seq=536 receive_seq=536 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.18 cputime=55.614 memavail=641252 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.671
Stats 1379.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6036 bytes_read=37248 bytes_retransmit=0 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=26.2 sysload=0.18 cputime=55.644 memavail=640580 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.591
Stats 1380.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6042 bytes_read=37425 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.18 cputime=55.668 memavail=640652 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.591
Stats 1381.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6080 bytes_read=37583 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.18 cputime=55.689 memavail=638688 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.606
Stats 1382.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6118 bytes_read=37756 bytes_retransmit=0 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.18 cputime=55.720 memavail=638016 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.525
Stats 1383.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6172 bytes_read=37956 bytes_retransmit=0 bytes_invalid=0 send_seq=550 receive_seq=550 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.8 sysload=0.16 cputime=55.751 memavail=637572 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.701
Stats 1384.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6210 bytes_read=38104 bytes_retransmit=0 bytes_invalid=0 send_seq=553 receive_seq=553 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.3 sysload=0.16 cputime=55.779 memavail=637348 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.635
Stats 1385.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6248 bytes_read=38266 bytes_retransmit=0 bytes_invalid=0 send_seq=556 receive_seq=556 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.2 sysload=0.16 cputime=55.805 memavail=641600 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.571
Stats 1386.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6302 bytes_read=38446 bytes_retransmit=0 bytes_invalid=0 send_seq=560 receive_seq=560 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.16 cputime=55.829 memavail=640988 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.530
Stats 1387.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6324 bytes_read=38596 bytes_retransmit=0 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.16 cputime=55.856 memavail=640540 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.610
Stats 1388.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6362 bytes_read=38798 bytes_retransmit=0 bytes_invalid=0 send_seq=565 receive_seq=565 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.15 cputime=55.884 memavail=640092 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.485
Stats 1389.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6411 bytes_read=38970 bytes_retransmit=0 bytes_invalid=0 send_seq=568 receive_seq=568 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=26.1 sysload=0.15 cputime=55.911 memavail=639644 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.657
Stats 1390.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6433 bytes_read=39123 bytes_retransmit=0 bytes_invalid=0 send_seq=570 receive_seq=570 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.15 cputime=55.937 memavail=641652 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.524
Stats 1391.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6471 bytes_read=39311 bytes_retransmit=0 bytes_invalid=0 send_seq=573 receive_seq=573 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.15 cputime=55.959 memavail=639652 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.755
Stats 1392.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6536 bytes_read=39488 bytes_retransmit=0 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.15 cputime=55.986 memavail=639428 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.479
Stats 1393.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6558 bytes_read=39655 bytes_retransmit=0 bytes_invalid=0 send_seq=579 receive_seq=579 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.1 sysload=0.14 cputime=56.012 memavail=641232 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.544
Stats 1394.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6618 bytes_read=39864 bytes_retransmit=0 bytes_invalid=0 send_seq=584 receive_seq=584 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.14 cputime=56.042 memavail=641008 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.577
Stats 1395.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6656 bytes_read=40036 bytes_retransmit=0 bytes_invalid=0 send_seq=587 receive_seq=587 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.4 sysload=0.14 cputime=56.068 memavail=641968 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.580
Stats 1396.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6678 bytes_read=40189 bytes_retransmit=0 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.6 sysload=0.14 cputime=56.091 memavail=640584 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.773
Stats 1397.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6716 bytes_read=40377 bytes_retransmit=0 bytes_invalid=0 send_seq=592 receive_seq=592 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.14 cputime=56.122 memavail=640108 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.683
Stats 1398.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=6738 bytes_read=40544 bytes_retransmit=0 bytes_invalid=0 send_seq=594 receive_seq=594 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.13 cputime=56.152 memavail=639660 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.556
Stats 1399.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6776 bytes_read=40716 bytes_retransmit=0 bytes_invalid=0 send_seq=597 receive_seq=597 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.13 cputime=56.184 memavail=638936 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.571
Stats 1400.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6814 bytes_read=40904 bytes_retransmit=0 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.13 cputime=56.210 memavail=641684 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.710
Stats 1401.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6868 bytes_read=41081 bytes_retransmit=0 bytes_invalid=0 send_seq=604 receive_seq=604 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.2 sysload=0.13 cputime=56.235 memavail=639240 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.506
Stats 1402.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6917 bytes_read=41239 bytes_retransmit=0 bytes_invalid=0 send_seq=607 receive_seq=607 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.13 cputime=56.263 memavail=638792 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.561
Stats 1403.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6971 bytes_read=41432 bytes_retransmit=0 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=56.294 memavail=638344 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.571
Stats 1404.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=6993 bytes_read=41613 bytes_retransmit=0 bytes_invalid=0 send_seq=613 receive_seq=613 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.12 cputime=56.326 memavail=638120 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.7 pwm=0.719
Stats 1405.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7015 bytes_read=41766 bytes_retransmit=0 bytes_invalid=0 send_seq=615 receive_seq=615 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=56.352 memavail=642016 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.535
Stats 1406.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7053 bytes_read=41954 bytes_retransmit=0 bytes_invalid=0 send_seq=618 receive_seq=618 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=27.2 sysload=0.12 cputime=56.376 memavail=641388 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.462
Stats 1407.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7075 bytes_read=42121 bytes_retransmit=0 bytes_invalid=0 send_seq=620 receive_seq=620 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.12 cputime=56.405 memavail=640912 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.569
Stats 1408.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7097 bytes_read=42274 bytes_retransmit=0 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.11 cputime=56.433 memavail=641244 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.682
Stats 1409.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7146 bytes_read=42476 bytes_retransmit=0 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.5 sysload=0.11 cputime=56.463 memavail=640992 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.695
Stats 1410.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7200 bytes_read=42653 bytes_retransmit=0 bytes_invalid=0 send_seq=629 receive_seq=629 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.11 cputime=56.490 memavail=641788 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.582
Stats 1411.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7222 bytes_read=42806 bytes_retransmit=0 bytes_invalid=0 send_seq=631 receive_seq=631 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.11 cputime=56.517 memavail=639744 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.530
Stats 1412.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7260 bytes_read=42994 bytes_retransmit=0 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.0 sysload=0.11 cputime=56.551 memavail=639312 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.705
Stats 1413.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7282 bytes_read=43161 bytes_retransmit=0 bytes_invalid=0 send_seq=636 receive_seq=636 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.10 cputime=56.581 memavail=639088 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.531
Stats 1414.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=7304 bytes_read=43328 bytes_retransmit=0 bytes_invalid=0 send_seq=638 receive_seq=638 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.0 sysload=0.10 cputime=56.608 memavail=639088 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.667
Stats 1415.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=7358 bytes_read=43521 bytes_retransmit=0 bytes_invalid=0 send_seq=642 receive_seq=642 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.0 sysload=0.10 cputime=56.634 memavail=640220 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.703
Stats 1416.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=7407 bytes_read=43693 bytes_retransmit=0 bytes_invalid=0 send_seq=645 receive_seq=645 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.10 cputime=56.658 memavail=640672 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.640
Stats 1417.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=7429 bytes_read=43846 bytes_retransmit=0 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.8 sysload=0.10 cputime=56.686 memavail=640000 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.547
Stats 1418.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=7451 bytes_read=44029 bytes_retransmit=0 bytes_invalid=0 send_seq=649 receive_seq=649 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.9 sysload=0.09 cputime=56.714 memavail=639524 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.622
Stats 1419.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7521 bytes_read=44225 bytes_retransmit=0 bytes_invalid=0 send_seq=654 receive_seq=654 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.09 cputime=56.743 memavail=638320 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.581
Stats 1420.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7575 bytes_read=44388 bytes_retransmit=0 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.09 cputime=56.770 memavail=642140 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.551
Stats 1421.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7629 bytes_read=44581 bytes_retransmit=0 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=56.794 memavail=639732 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.640
Stats 1422.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7683 bytes_read=44758 bytes_retransmit=0 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.09 cputime=56.821 memavail=640924 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.673
Stats 1423.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7721 bytes_read=44916 bytes_retransmit=0 bytes_invalid=0 send_seq=669 receive_seq=669 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.08 cputime=56.848 memavail=640924 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.713
Stats 1424.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7775 bytes_read=45123 bytes_retransmit=0 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.7 sysload=0.08 cputime=56.878 memavail=640476 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.458
Stats 1425.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7829 bytes_read=45300 bytes_retransmit=0 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.08 cputime=56.905 memavail=642280 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.725
Stats 1426.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7851 bytes_read=45453 bytes_retransmit=0 bytes_invalid=0 send_seq=679 receive_seq=679 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.08 cputime=56.926 memavail=641356 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.603
Stats 1427.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7889 bytes_read=45641 bytes_retransmit=0 bytes_invalid=0 send_seq=682 receive_seq=682 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.08 cputime=56.955 memavail=640656 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.504
Stats 1428.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7911 bytes_read=45808 bytes_retransmit=0 bytes_invalid=0 send_seq=684 receive_seq=684 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.8 sysload=0.08 cputime=56.982 memavail=641092 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.621
Stats 1429.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7949 bytes_read=45980 bytes_retransmit=0 bytes_invalid=0 send_seq=687 receive_seq=687 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.7 sysload=0.08 cputime=57.009 memavail=640868 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.582
Stats 1430.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=7982 bytes_read=46163 bytes_retransmit=0 bytes_invalid=0 send_seq=689 receive_seq=689 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.08 cputime=57.034 memavail=641752 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.552
Stats 1431.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8036 bytes_read=46340 bytes_retransmit=0 bytes_invalid=0 send_seq=693 receive_seq=693 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.5 sysload=0.08 cputime=57.058 memavail=639308 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.684
Stats 1432.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8074 bytes_read=46498 bytes_retransmit=0 bytes_invalid=0 send_seq=696 receive_seq=696 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.3 sysload=0.08 cputime=57.085 memavail=638860 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.692
Stats 1433.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8112 bytes_read=46686 bytes_retransmit=0 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=25.2 sysload=0.07 cputime=57.113 memavail=638412 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.622
Stats 1434.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8161 bytes_read=46872 bytes_retransmit=0 bytes_invalid=0 send_seq=702 receive_seq=702 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.07 cputime=57.142 memavail=638188 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.616
Stats 1435.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8199 bytes_read=47030 bytes_retransmit=0 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.07 cputime=57.168 memavail=641716 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.562
Stats 1436.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8205 bytes_read=47208 bytes_retransmit=0 bytes_invalid=0 send_seq=706 receive_seq=706 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.07 cputime=57.186 memavail=641012 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.562
Stats 1437.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8243 bytes_read=47380 bytes_retransmit=0 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.07 cputime=57.214 memavail=640788 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.540
Stats 1438.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8265 bytes_read=47533 bytes_retransmit=0 bytes_invalid=0 send_seq=711 receive_seq=711 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.06 cputime=57.242 memavail=640340 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.656
Stats 1439.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8287 bytes_read=47744 bytes_retransmit=0 bytes_invalid=0 send_seq=713 receive_seq=713 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.8 sysload=0.06 cputime=57.272 memavail=639836 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.574
Stats 1440.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8293 bytes_read=47892 bytes_retransmit=0 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.06 cputime=57.296 memavail=640832 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.574
Stats 1441.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8326 bytes_read=48045 bytes_retransmit=0 bytes_invalid=0 send_seq=716 receive_seq=716 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.4 sysload=0.06 cputime=57.317 memavail=638936 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.583
Stats 1442.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=8380 bytes_read=48252 bytes_retransmit=0 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.9 sysload=0.06 cputime=57.346 memavail=640496 print_time=58.893 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.631
Stats 1443.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=9092 bytes_read=48770 bytes_retransmit=0 bytes_invalid=0 send_seq=748 receive_seq=748 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.06 cputime=57.439 memavail=640312 print_time=314.620 buffer_time=16.678 print_stall=0 extruder: target=200 temp=199.9 pwm=0.609
Stats 1444.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9126 bytes_read=48969 bytes_retransmit=0 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.06 cputime=57.473 memavail=639584 print_time=314.620 buffer_time=15.677 print_stall=0 extruder: target=200 temp=199.9 pwm=0.609
Stats 1445.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9208 bytes_read=49209 bytes_retransmit=0 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.8 sysload=0.06 cputime=57.509 memavail=641780 print_time=314.620 buffer_time=14.676 print_stall=0 extruder: target=200 temp=200.0 pwm=0.537
Stats 1446.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9258 bytes_read=49400 bytes_retransmit=0 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.06 cputime=57.547 memavail=641556 print_time=314.620 buffer_time=13.676 print_stall=0 extruder: target=200 temp=199.9 pwm=0.594
Stats 1447.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9308 bytes_read=49599 bytes_retransmit=0 bytes_invalid=0 send_seq=765 receive_seq=765 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.06 cputime=57.585 memavail=640084 print_time=314.620 buffer_time=12.675 print_stall=0 extruder: target=200 temp=199.8 pwm=0.694
Stats 1448.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9369 bytes_read=49842 bytes_retransmit=0 bytes_invalid=0 send_seq=769 receive_seq=769 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.13 cputime=57.622 memavail=640928 print_time=314.620 buffer_time=11.675 print_stall=0 extruder: target=200 temp=199.7 pwm=0.651
Stats 1449.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9435 bytes_read=50060 bytes_retransmit=0 bytes_invalid=0 send_seq=774 receive_seq=774 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=32.3 sysload=0.13 cputime=57.655 memavail=640704 print_time=314.620 buffer_time=10.674 print_stall=0 extruder: target=200 temp=199.4 pwm=0.775
Stats 1450.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9485 bytes_read=50259 bytes_retransmit=0 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.13 cputime=57.684 memavail=642176 print_time=314.620 buffer_time=9.674 print_stall=0 extruder: target=200 temp=199.0 pwm=0.850
Stats 1451.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9567 bytes_read=50512 bytes_retransmit=0 bytes_invalid=0 send_seq=784 receive_seq=784 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.0 sysload=0.13 cputime=57.715 memavail=640736 print_time=314.620 buffer_time=8.673 print_stall=0 extruder: target=200 temp=198.7 pwm=0.862
Stats 1452.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9649 bytes_read=50721 bytes_retransmit=0 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.13 cputime=57.749 memavail=640516 print_time=314.620 buffer_time=7.672 print_stall=0 extruder: target=200 temp=198.6 pwm=0.872
Stats 1453.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9699 bytes_read=50920 bytes_retransmit=0 bytes_invalid=0 send_seq=794 receive_seq=794 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.7 sysload=0.12 cputime=57.782 memavail=640292 print_time=314.620 buffer_time=6.670 print_stall=0 extruder: target=200 temp=198.5 pwm=0.794
Stats 1454.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9781 bytes_read=51187 bytes_retransmit=0 bytes_invalid=0 send_seq=800 receive_seq=800 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.8 sysload=0.12 cputime=57.816 memavail=639672 print_time=314.620 buffer_time=5.670 print_stall=0 extruder: target=200 temp=198.6 pwm=0.741
Stats 1455.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9859 bytes_read=51402 bytes_retransmit=0 bytes_invalid=0 send_seq=805 receive_seq=805 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.0 sysload=0.12 cputime=57.844 memavail=641792 print_time=314.620 buffer_time=4.669 print_stall=0 extruder: target=200 temp=198.6 pwm=0.687
Stats 1456.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9925 bytes_read=51606 bytes_retransmit=0 bytes_invalid=0 send_seq=810 receive_seq=810 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=57.871 memavail=641564 print_time=314.620 buffer_time=3.669 print_stall=0 extruder: target=200 temp=198.6 pwm=0.703
Stats 1457.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9991 bytes_read=51854 bytes_retransmit=0 bytes_invalid=0 send_seq=815 receive_seq=815 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.12 cputime=57.903 memavail=641052 print_time=314.620 buffer_time=2.669 print_stall=0 extruder: target=200 temp=198.4 pwm=0.872
Stats 1458.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10073 bytes_read=52063 bytes_retransmit=0 bytes_invalid=0 send_seq=821 receive_seq=821 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.0 sysload=0.11 cputime=57.935 memavail=640828 print_time=314.620 buffer_time=1.668 print_stall=0 extruder: target=200 temp=198.6 pwm=0.770
Stats 1459.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10139 bytes_read=52281 bytes_retransmit=0 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=57.966 memavail=640828 print_time=314.620 buffer_time=0.667 print_stall=0 extruder: target=200 temp=199.0 pwm=0.651
Stats 1460.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10210 bytes_read=52524 bytes_retransmit=0 bytes_invalid=0 send_seq=830 receive_seq=830 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.11 cputime=57.995 memavail=641768 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.824
Stats 1461.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10287 bytes_read=52728 bytes_retransmit=0 bytes_invalid=0 send_seq=835 receive_seq=835 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.8 sysload=0.11 cputime=58.023 memavail=640020 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.0 pwm=0.778
Stats 1462.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10353 bytes_read=52932 bytes_retransmit=0 bytes_invalid=0 send_seq=840 receive_seq=840 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.9 sysload=0.11 cputime=58.055 memavail=639796 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.602
Stats 1463.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10419 bytes_read=53180 bytes_retransmit=0 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.2 sysload=0.10 cputime=58.087 memavail=639320 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.605
Stats 1464.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10485 bytes_read=53398 bytes_retransmit=0 bytes_invalid=0 send_seq=850 receive_seq=850 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.10 cputime=58.118 memavail=639320 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.472
Stats 1465.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10551 bytes_read=53602 bytes_retransmit=0 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.10 cputime=58.145 memavail=641996 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.520
Stats 1466.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10633 bytes_read=53855 bytes_retransmit=0 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.10 cputime=58.173 memavail=641544 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.482
Stats 1467.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10683 bytes_read=54054 bytes_retransmit=0 bytes_invalid=0 send_seq=865 receive_seq=865 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.10 cputime=58.204 memavail=641096 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.534
Stats 1468.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10744 bytes_read=54268 bytes_retransmit=0 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.09 cputime=58.237 memavail=641320 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.527
Stats 1469.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10810 bytes_read=54515 bytes_retransmit=0 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.5 sysload=0.09 cputime=58.270 memavail=641320 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.626
Stats 1470.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10892 bytes_read=54724 bytes_retransmit=0 bytes_invalid=0 send_seq=880 receive_seq=880 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.0 sysload=0.09 cputime=58.298 memavail=642024 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.592
Stats 1471.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10958 bytes_read=54943 bytes_retransmit=0 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.0 sysload=0.09 cputime=58.325 memavail=640276 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.625
Stats 1472.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11019 bytes_read=55171 bytes_retransmit=0 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.09 cputime=58.359 memavail=641588 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.644
Stats 1473.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11069 bytes_read=55370 bytes_retransmit=0 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.09 cputime=58.390 memavail=641812 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.508
Stats 1474.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11151 bytes_read=55608 bytes_retransmit=0 bytes_invalid=0 send_seq=899 receive_seq=899 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.09 cputime=58.424 memavail=641596 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.569
Stats 1475.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11228 bytes_read=55841 bytes_retransmit=0 bytes_invalid=0 send_seq=904 receive_seq=904 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.09 cputime=58.453 memavail=642012 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.599
Stats 1476.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11294 bytes_read=56045 bytes_retransmit=0 bytes_invalid=0 send_seq=909 receive_seq=909 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.09 cputime=58.480 memavail=641588 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.660
Stats 1477.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11376 bytes_read=56269 bytes_retransmit=0 bytes_invalid=0 send_seq=915 receive_seq=915 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.09 cputime=58.514 memavail=641588 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.548
Stats 1478.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11410 bytes_read=56492 bytes_retransmit=0 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.08 cputime=58.548 memavail=641336 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.548
Stats 1479.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11476 bytes_read=56710 bytes_retransmit=0 bytes_invalid=0 send_seq=923 receive_seq=923 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.8 sysload=0.08 cputime=58.581 memavail=641344 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.603
Stats 1480.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11542 bytes_read=56929 bytes_retransmit=0 bytes_invalid=0 send_seq=928 receive_seq=928 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.08 cputime=58.611 memavail=642248 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.626
Stats 1481.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11608 bytes_read=57162 bytes_retransmit=0 bytes_invalid=0 send_seq=933 receive_seq=933 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.08 cputime=58.642 memavail=640280 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.546
Stats 1482.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11674 bytes_read=57366 bytes_retransmit=0 bytes_invalid=0 send_seq=938 receive_seq=938 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.08 cputime=58.677 memavail=642212 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.634
Stats 1483.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11740 bytes_read=57585 bytes_retransmit=0 bytes_invalid=0 send_seq=943 receive_seq=943 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.5 sysload=0.07 cputime=58.713 memavail=641960 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.633
Stats 1484.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11822 bytes_read=57837 bytes_retransmit=0 bytes_invalid=0 send_seq=949 receive_seq=949 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.07 cputime=58.751 memavail=638480 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.668
Stats 1485.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11888 bytes_read=58041 bytes_retransmit=0 bytes_invalid=0 send_seq=954 receive_seq=954 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=27.6 sysload=0.07 cputime=58.786 memavail=640584 print_time=314.620 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.704
Stats 1486.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11939 bytes_read=58214 bytes_retransmit=0 bytes_invalid=0 send_seq=957 receive_seq=957 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.07 cputime=58.827 memavail=640812 print_time=341.388 buffer_time=0.416 print_stall=0 extruder: target=0 temp=200.5 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1966111160: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:29:48 2024 (1713288588.5 1487.9)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.000002
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.85
stealthchop_threshold = 999999

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1965693104: New connection
webhooks client 1965693104: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1493.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2421 bytes_read=5752 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=201 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002513  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.0 sysload=0.14 cputime=61.676 memavail=636028 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.4 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965693104
webhooks: registering remote method 'reboot_machine' for connection id: 1965693104
webhooks: registering remote method 'pause_job_queue' for connection id: 1965693104
webhooks: registering remote method 'start_job_queue' for connection id: 1965693104
Stats 1494.1: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2442 bytes_read=5940 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002881  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.8 sysload=0.14 cputime=61.735 memavail=638800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.3 pwm=0.000
Stats 1495.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000035 bytes_write=2448 bytes_read=6117 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003097  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.14 cputime=61.807 memavail=637960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.9 pwm=0.000
Stats 1496.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000035 bytes_write=2454 bytes_read=6265 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003038  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.14 cputime=61.835 memavail=638172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.3 pwm=0.000
Stats 1497.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000035 bytes_write=2460 bytes_read=6443 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002848  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.4 sysload=0.14 cputime=61.864 memavail=637948 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.5 pwm=0.000
Stats 1498.1: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000035 bytes_write=2466 bytes_read=6605 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002833  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.0 sysload=0.14 cputime=61.892 memavail=637948 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.1 pwm=0.000
Stats 1499.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2472 bytes_read=6767 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002759  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.12 cputime=61.919 memavail=640684 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.9 pwm=0.000
Stats 1500.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2478 bytes_read=6945 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002654  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.8 sysload=0.12 cputime=61.940 memavail=641672 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.8 pwm=0.000
Stats 1501.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2484 bytes_read=7107 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.8 sysload=0.12 cputime=61.968 memavail=639232 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.1 pwm=0.000
Stats 1502.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2490 bytes_read=7255 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.12 cputime=61.994 memavail=638476 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.0 pwm=0.000
Stats 1503.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2496 bytes_read=7433 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002635  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=62.021 memavail=638476 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.6 pwm=0.000
Stats 1504.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2502 bytes_read=7595 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.3 sysload=0.11 cputime=62.048 memavail=641260 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.9 pwm=0.000
Stats 1505.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2508 bytes_read=7757 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002619  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.11 cputime=62.068 memavail=642012 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.6 pwm=0.000
Stats 1506.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2514 bytes_read=7935 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002611  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.11 cputime=62.096 memavail=641964 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.4 pwm=0.000
Stats 1507.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2520 bytes_read=8097 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002618  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.3 sysload=0.11 cputime=62.122 memavail=641740 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.7 pwm=0.000
Stats 1508.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2526 bytes_read=8245 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=62.149 memavail=641516 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.6 pwm=0.000
Stats 1509.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2538 bytes_read=8423 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=219 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.10 cputime=62.176 memavail=641488 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=183.5 pwm=0.000
Stats 1510.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2544 bytes_read=8615 bytes_retransmit=0 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.10 cputime=62.198 memavail=641528 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=181.5 pwm=0.000
Stats 1511.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2550 bytes_read=8763 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002808  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.10 cputime=62.225 memavail=642176 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.4 pwm=0.000
Stats 1512.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2556 bytes_read=8941 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002788  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=26.2 sysload=0.10 cputime=62.252 memavail=641928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.2 pwm=0.000
Stats 1513.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2562 bytes_read=9103 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002771  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.10 cputime=62.279 memavail=641928 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.7 pwm=0.000
Stats 1514.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2568 bytes_read=9251 bytes_retransmit=0 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002768  raspberry_pi: temp=53.7 heater_bed: target=0 temp=18.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.10 cputime=62.305 memavail=641180 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=176.4 pwm=0.000
Stats 1515.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2574 bytes_read=9443 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002754  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.6 sysload=0.10 cputime=62.326 memavail=641680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.3 pwm=0.000
Stats 1516.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2580 bytes_read=9605 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002741  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.10 cputime=62.352 memavail=641456 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.6 pwm=0.000
Stats 1517.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2586 bytes_read=9753 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.10 cputime=62.378 memavail=640960 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=172.4 pwm=0.000
Stats 1518.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2592 bytes_read=9931 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.3 sysload=0.10 cputime=62.405 memavail=640708 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.3 pwm=0.000
Stats 1519.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2598 bytes_read=10093 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.09 cputime=62.432 memavail=640400 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.8 pwm=0.000
Stats 1520.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2604 bytes_read=10255 bytes_retransmit=0 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=62.460 memavail=641184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.7 pwm=0.000
Stats 1521.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2610 bytes_read=10433 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002748  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.9 sysload=0.09 cputime=62.490 memavail=638972 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=167.5 pwm=0.000
Stats 1522.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2616 bytes_read=10595 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002743  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.09 cputime=62.520 memavail=641172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.9 pwm=0.000
Stats 1523.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2622 bytes_read=10743 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002740  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.8 sysload=0.09 cputime=62.548 memavail=641756 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.0 pwm=0.000
Stats 1524.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2628 bytes_read=10921 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002741  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.0 sysload=0.08 cputime=62.575 memavail=641444 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=163.9 pwm=0.000
Stats 1525.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2634 bytes_read=11097 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.6 sysload=0.08 cputime=62.596 memavail=641208 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.3 pwm=0.000
Stats 1526.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2640 bytes_read=11245 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.08 cputime=62.622 memavail=640732 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.4 pwm=0.000
Stats 1527.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2646 bytes_read=11423 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.08 cputime=62.648 memavail=640404 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.3 pwm=0.000
Stats 1528.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2652 bytes_read=11585 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.08 cputime=62.671 memavail=640404 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.9 pwm=0.000
Stats 1529.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2658 bytes_read=11733 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.07 cputime=62.698 memavail=642164 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.8 pwm=0.000
Stats 1530.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2664 bytes_read=11925 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.8 sysload=0.07 cputime=62.725 memavail=640232 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.8 pwm=0.000
Stats 1531.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2670 bytes_read=12087 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.07 cputime=62.756 memavail=639040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=155.6 pwm=0.000
Stats 1532.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2676 bytes_read=12235 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.07 cputime=62.786 memavail=639040 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.4 pwm=0.000
Stats 1533.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2682 bytes_read=12413 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.07 cputime=62.816 memavail=638284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=153.4 pwm=0.000
Stats 1534.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2688 bytes_read=12575 bytes_retransmit=0 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=52.6 heater_bed: target=0 temp=18.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.07 cputime=62.845 memavail=641356 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.2 pwm=0.000
Stats 1535.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2694 bytes_read=12737 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.4 sysload=0.07 cputime=62.872 memavail=640872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.2 pwm=0.000
Stats 1536.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2700 bytes_read=12915 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=52.1 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.07 cputime=62.901 memavail=639872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.2 pwm=0.000
Stats 1537.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2706 bytes_read=13077 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=25.7 sysload=0.07 cputime=62.929 memavail=639424 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.9 pwm=0.000
Stats 1538.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2728 bytes_read=13230 bytes_retransmit=0 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.07 cputime=62.960 memavail=640228 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=148.0 pwm=1.000
Heater extruder approaching new target of 180.000
Stats 1539.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2734 bytes_read=13408 bytes_retransmit=0 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.06 cputime=62.988 memavail=641040 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=147.1 pwm=1.000
Stats 1540.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2740 bytes_read=13584 bytes_retransmit=0 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.7 sysload=0.06 cputime=63.010 memavail=637824 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=146.1 pwm=1.000
Stats 1541.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2746 bytes_read=13732 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.06 cputime=63.035 memavail=636384 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=145.4 pwm=1.000
Stats 1542.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2768 bytes_read=13915 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.0 sysload=0.06 cputime=63.062 memavail=640644 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=145.2 pwm=1.000
Stats 1543.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2774 bytes_read=14077 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.06 cputime=63.089 memavail=640644 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=145.1 pwm=1.000
Stats 1544.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2780 bytes_read=14225 bytes_retransmit=0 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.06 cputime=63.118 memavail=642124 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=145.1 pwm=1.000
Stats 1545.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2786 bytes_read=14417 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.06 cputime=63.141 memavail=641184 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=145.7 pwm=1.000
Stats 1546.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2808 bytes_read=14584 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.06 cputime=63.168 memavail=640736 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=146.2 pwm=1.000
Stats 1547.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2814 bytes_read=14732 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.1 sysload=0.06 cputime=63.195 memavail=640512 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=146.9 pwm=1.000
Stats 1548.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2820 bytes_read=14917 bytes_retransmit=0 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.06 cputime=63.221 memavail=639840 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=148.0 pwm=1.000
Stats 1549.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2826 bytes_read=15055 bytes_retransmit=0 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.05 cputime=63.250 memavail=642176 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=148.9 pwm=1.000
Stats 1550.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2848 bytes_read=15212 bytes_retransmit=0 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.9 sysload=0.05 cputime=63.270 memavail=641436 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=150.0 pwm=1.000
Stats 1551.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2854 bytes_read=15391 bytes_retransmit=0 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.05 cputime=63.298 memavail=639008 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=151.2 pwm=1.000
Stats 1552.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2860 bytes_read=15538 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.4 sysload=0.05 cputime=63.326 memavail=639008 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=152.1 pwm=1.000
Stats 1553.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2866 bytes_read=15686 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.05 cputime=63.353 memavail=639008 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=153.4 pwm=1.000
Stats 1554.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2872 bytes_read=15878 bytes_retransmit=0 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.05 cputime=63.381 memavail=642040 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=155.2 pwm=1.000
Stats 1555.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2894 bytes_read=16045 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.05 cputime=63.401 memavail=641916 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=156.1 pwm=1.000
Stats 1556.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2900 bytes_read=16193 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.05 cputime=63.429 memavail=640992 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=157.4 pwm=1.000
Stats 1557.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2906 bytes_read=16385 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.5 sysload=0.05 cputime=63.457 memavail=641404 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=159.0 pwm=1.000
Stats 1558.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2912 bytes_read=16533 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.0 sysload=0.05 cputime=63.484 memavail=640956 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=160.1 pwm=1.000
Stats 1559.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2929 bytes_read=16681 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=25.9 sysload=0.04 cputime=63.511 memavail=642396 print_time=48.452 buffer_time=0.000 print_stall=0 extruder: target=180 temp=161.5 pwm=1.000
Stats 1560.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2935 bytes_read=16887 bytes_retransmit=0 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.04 cputime=63.534 memavail=641472 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=163.1 pwm=1.000
Stats 1561.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2941 bytes_read=17035 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.4 sysload=0.04 cputime=63.560 memavail=639728 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=164.3 pwm=1.000
Stats 1562.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2947 bytes_read=17183 bytes_retransmit=0 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.04 cputime=63.585 memavail=639252 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=165.5 pwm=1.000
Stats 1563.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2969 bytes_read=17380 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.04 cputime=63.616 memavail=638804 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=167.3 pwm=1.000
Stats 1564.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2975 bytes_read=17528 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.04 cputime=63.642 memavail=641648 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=168.4 pwm=1.000
Stats 1565.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2981 bytes_read=17690 bytes_retransmit=0 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=25.3 sysload=0.04 cputime=63.664 memavail=641044 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=169.7 pwm=1.000
Stats 1566.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2987 bytes_read=17882 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.4 sysload=0.04 cputime=63.692 memavail=640820 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=171.2 pwm=1.000
Stats 1567.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3009 bytes_read=18035 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.04 cputime=63.721 memavail=641468 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=172.4 pwm=1.000
Stats 1568.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3015 bytes_read=18183 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=28.6 sysload=0.04 cputime=63.749 memavail=640992 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=173.8 pwm=1.000
Stats 1569.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3021 bytes_read=18375 bytes_retransmit=0 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.04 cputime=63.779 memavail=641700 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=175.4 pwm=1.000
Stats 1570.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3033 bytes_read=18523 bytes_retransmit=0 bytes_invalid=0 send_seq=289 receive_seq=288 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.04 cputime=63.802 memavail=641472 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=176.5 pwm=1.000
Stats 1571.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3055 bytes_read=18706 bytes_retransmit=0 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=31.7 sysload=0.04 cputime=63.831 memavail=639536 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=177.7 pwm=1.000
Stats 1572.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3061 bytes_read=18898 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.0 sysload=0.04 cputime=63.858 memavail=641268 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.4 pwm=1.000
Stats 1573.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3067 bytes_read=19046 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.04 cputime=63.884 memavail=641464 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.2 pwm=1.000
Stats 1574.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3073 bytes_read=19209 bytes_retransmit=0 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.11 cputime=63.915 memavail=642256 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.5 pwm=1.000
Stats 1575.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3079 bytes_read=19386 bytes_retransmit=0 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.3 sysload=0.11 cputime=63.936 memavail=641040 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.1 pwm=0.988
Stats 1576.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3128 bytes_read=19558 bytes_retransmit=0 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.8 sysload=0.11 cputime=63.964 memavail=641760 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.2 pwm=1.000
Stats 1577.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3150 bytes_read=19726 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.11 cputime=63.992 memavail=641060 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=185.3 pwm=0.859
Stats 1578.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3172 bytes_read=19908 bytes_retransmit=0 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.3 sysload=0.11 cputime=64.024 memavail=640612 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.8 pwm=0.806
Stats 1579.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3210 bytes_read=20066 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.10 cputime=64.052 memavail=640952 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.6 pwm=0.892
Stats 1580.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3232 bytes_read=20234 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.10 cputime=64.073 memavail=641016 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=188.8 pwm=0.782
Stats 1581.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3254 bytes_read=20430 bytes_retransmit=0 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.10 cputime=64.103 memavail=638828 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.0 pwm=0.856
Stats 1582.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3276 bytes_read=20583 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.10 cputime=64.131 memavail=638380 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.1 pwm=0.729
Stats 1583.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3282 bytes_read=20746 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.10 cputime=64.159 memavail=641040 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.9 pwm=0.729
Stats 1584.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3320 bytes_read=20933 bytes_retransmit=0 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.0 sysload=0.10 cputime=64.190 memavail=640748 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.1 pwm=0.639
Stats 1585.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3374 bytes_read=21096 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.10 cputime=64.212 memavail=641004 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.9 pwm=0.607
Stats 1586.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3412 bytes_read=21283 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.10 cputime=64.241 memavail=640780 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.5 pwm=0.654
Stats 1587.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3418 bytes_read=21460 bytes_retransmit=0 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.3 sysload=0.10 cputime=64.271 memavail=641248 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.3 pwm=0.654
Stats 1588.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3456 bytes_read=21618 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.10 cputime=64.300 memavail=640548 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.9 pwm=0.647
Heater extruder within range of 200.000
Stats 1589.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3494 bytes_read=21791 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.9 sysload=0.17 cputime=64.330 memavail=640416 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.3 pwm=0.651
Stats 1590.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3500 bytes_read=21968 bytes_retransmit=0 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.17 cputime=64.351 memavail=640448 print_time=70.528 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.8 pwm=0.718
Stats 1591.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4186 bytes_read=22504 bytes_retransmit=0 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=31.2 sysload=0.17 cputime=64.448 memavail=638264 print_time=118.778 buffer_time=16.706 print_stall=0 extruder: target=200 temp=197.4 pwm=0.610
Stats 1592.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4252 bytes_read=22723 bytes_retransmit=0 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=53.7 heater_bed: target=0 temp=23.2 pwm=0.000 mcu_temp: temp=27.2 sysload=0.17 cputime=64.484 memavail=637816 print_time=118.778 buffer_time=15.705 print_stall=0 extruder: target=200 temp=197.8 pwm=0.647
Stats 1593.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4329 bytes_read=22956 bytes_retransmit=0 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.0 sysload=0.17 cputime=64.520 memavail=637592 print_time=118.778 buffer_time=14.705 print_stall=0 extruder: target=200 temp=198.4 pwm=0.510
Stats 1594.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4379 bytes_read=23155 bytes_retransmit=0 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.8 sysload=0.15 cputime=64.556 memavail=640832 print_time=118.778 buffer_time=13.705 print_stall=0 extruder: target=200 temp=198.4 pwm=0.714
Stats 1595.1: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4445 bytes_read=23374 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.15 cputime=64.587 memavail=641420 print_time=118.778 buffer_time=12.704 print_stall=0 extruder: target=200 temp=198.3 pwm=0.862
Stats 1596.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4522 bytes_read=23622 bytes_retransmit=0 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.7 sysload=0.15 cputime=64.624 memavail=640972 print_time=118.778 buffer_time=11.703 print_stall=0 extruder: target=200 temp=198.9 pwm=0.628
Stats 1597.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4588 bytes_read=23826 bytes_retransmit=0 bytes_invalid=0 send_seq=386 receive_seq=386 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=30.6 sysload=0.15 cputime=64.661 memavail=640524 print_time=118.778 buffer_time=10.702 print_stall=0 extruder: target=200 temp=198.7 pwm=0.741
Stats 1598.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4670 bytes_read=24050 bytes_retransmit=0 bytes_invalid=0 send_seq=392 receive_seq=392 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.15 cputime=64.696 memavail=640076 print_time=118.778 buffer_time=9.702 print_stall=0 extruder: target=200 temp=198.4 pwm=0.906
Stats 1599.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4763 bytes_read=24288 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=27.6 sysload=0.14 cputime=64.735 memavail=642104 print_time=118.778 buffer_time=8.701 print_stall=0 extruder: target=200 temp=198.5 pwm=0.862
Stats 1600.1: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4845 bytes_read=24497 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.14 cputime=64.764 memavail=640912 print_time=118.778 buffer_time=7.701 print_stall=0 extruder: target=200 temp=198.3 pwm=0.932
Stats 1601.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4922 bytes_read=24730 bytes_retransmit=0 bytes_invalid=0 send_seq=409 receive_seq=409 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.14 cputime=64.797 memavail=639208 print_time=118.778 buffer_time=6.700 print_stall=0 extruder: target=200 temp=198.5 pwm=0.794
Stats 1602.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4956 bytes_read=24953 bytes_retransmit=0 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.14 cputime=64.833 memavail=638984 print_time=118.778 buffer_time=5.699 print_stall=0 extruder: target=200 temp=198.5 pwm=0.794
Stats 1603.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4990 bytes_read=25147 bytes_retransmit=0 bytes_invalid=0 send_seq=415 receive_seq=415 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.0 sysload=0.14 cputime=64.868 memavail=641208 print_time=118.778 buffer_time=4.699 print_stall=0 extruder: target=200 temp=198.6 pwm=0.794
Stats 1604.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5072 bytes_read=25371 bytes_retransmit=0 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.13 cputime=64.902 memavail=642136 print_time=118.778 buffer_time=3.699 print_stall=0 extruder: target=200 temp=198.8 pwm=0.720
Stats 1605.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5133 bytes_read=25599 bytes_retransmit=0 bytes_invalid=0 send_seq=425 receive_seq=425 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.13 cputime=64.931 memavail=641464 print_time=118.778 buffer_time=2.698 print_stall=0 extruder: target=200 temp=199.1 pwm=0.620
Stats 1606.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5199 bytes_read=25817 bytes_retransmit=0 bytes_invalid=0 send_seq=430 receive_seq=430 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=26.5 sysload=0.13 cputime=64.960 memavail=637696 print_time=118.778 buffer_time=1.698 print_stall=0 extruder: target=200 temp=198.9 pwm=0.856
Stats 1607.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5265 bytes_read=26036 bytes_retransmit=0 bytes_invalid=0 send_seq=435 receive_seq=435 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=25.3 sysload=0.13 cputime=64.998 memavail=637472 print_time=118.778 buffer_time=0.698 print_stall=0 extruder: target=200 temp=199.3 pwm=0.631
Stats 1608.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5358 bytes_read=26252 bytes_retransmit=0 bytes_invalid=0 send_seq=439 receive_seq=439 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.8 sysload=0.13 cputime=65.036 memavail=637024 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.817
Stats 1609.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5408 bytes_read=26441 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.0 sysload=0.12 cputime=65.066 memavail=641876 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.709
Stats 1610.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5474 bytes_read=26649 bytes_retransmit=0 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=26.9 sysload=0.12 cputime=65.092 memavail=640500 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.6 pwm=0.658
Stats 1611.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5508 bytes_read=26877 bytes_retransmit=0 bytes_invalid=0 send_seq=451 receive_seq=451 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.12 cputime=65.127 memavail=639488 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.8 pwm=0.658
Stats 1612.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5574 bytes_read=27081 bytes_retransmit=0 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.2 sysload=0.12 cputime=65.159 memavail=639040 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.1 pwm=0.623
Stats 1613.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5608 bytes_read=27290 bytes_retransmit=0 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.12 cputime=65.191 memavail=638592 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.623
Stats 1614.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5701 bytes_read=27528 bytes_retransmit=0 bytes_invalid=0 send_seq=465 receive_seq=465 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.11 cputime=65.225 memavail=640936 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.388
Stats 1615.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5778 bytes_read=27732 bytes_retransmit=0 bytes_invalid=0 send_seq=470 receive_seq=470 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.9 sysload=0.11 cputime=65.254 memavail=641860 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.620
Stats 1616.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5828 bytes_read=27960 bytes_retransmit=0 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=26.9 sysload=0.11 cputime=65.291 memavail=641860 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.518
Stats 1617.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5862 bytes_read=28183 bytes_retransmit=0 bytes_invalid=0 send_seq=477 receive_seq=477 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=65.326 memavail=641364 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.3 pwm=0.518
Stats 1618.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5896 bytes_read=28377 bytes_retransmit=0 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.8 sysload=0.11 cputime=65.363 memavail=641492 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.4 pwm=0.518
Stats 1619.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5978 bytes_read=28601 bytes_retransmit=0 bytes_invalid=0 send_seq=486 receive_seq=486 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.3 sysload=0.10 cputime=65.397 memavail=641992 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.3 pwm=0.545
Stats 1620.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6071 bytes_read=28839 bytes_retransmit=0 bytes_invalid=0 send_seq=492 receive_seq=492 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.4 sysload=0.10 cputime=65.425 memavail=641972 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.3 pwm=0.595
Stats 1621.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6137 bytes_read=29057 bytes_retransmit=0 bytes_invalid=0 send_seq=497 receive_seq=497 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.10 cputime=65.464 memavail=642244 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.3 pwm=0.615
Stats 1622.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6198 bytes_read=29271 bytes_retransmit=0 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.10 cputime=65.503 memavail=641976 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.3 pwm=0.619
Stats 1623.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6248 bytes_read=29499 bytes_retransmit=0 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.10 cputime=65.538 memavail=641472 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.4 pwm=0.518
Stats 1624.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6314 bytes_read=29703 bytes_retransmit=0 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.09 cputime=65.568 memavail=642496 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.3 pwm=0.545
Stats 1625.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6364 bytes_read=29899 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.4 sysload=0.09 cputime=65.594 memavail=641916 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.618
Stats 1626.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6457 bytes_read=30169 bytes_retransmit=0 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.3 sysload=0.09 cputime=65.633 memavail=641692 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.597
Stats 1627.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6507 bytes_read=30368 bytes_retransmit=0 bytes_invalid=0 send_seq=524 receive_seq=524 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.09 cputime=65.671 memavail=641440 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.2 pwm=0.453
Stats 1628.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6573 bytes_read=30587 bytes_retransmit=0 bytes_invalid=0 send_seq=529 receive_seq=529 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.2 sysload=0.09 cputime=65.708 memavail=641224 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.674
Stats 1629.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6639 bytes_read=30820 bytes_retransmit=0 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.08 cputime=65.740 memavail=642052 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.513
Stats 1630.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6721 bytes_read=31011 bytes_retransmit=0 bytes_invalid=0 send_seq=540 receive_seq=540 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.0 sysload=0.08 cputime=65.768 memavail=641876 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.630
Stats 1631.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6803 bytes_read=31267 bytes_retransmit=0 bytes_invalid=0 send_seq=546 receive_seq=546 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.9 sysload=0.08 cputime=65.806 memavail=639944 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.554
Stats 1632.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6875 bytes_read=31500 bytes_retransmit=0 bytes_invalid=0 send_seq=552 receive_seq=551 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.08 cputime=65.842 memavail=641868 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.532
Stats 1633.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6941 bytes_read=31720 bytes_retransmit=0 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.08 cputime=65.876 memavail=641392 print_time=118.778 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.667
Stats 1634.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7013 bytes_read=31918 bytes_retransmit=0 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.08 cputime=65.906 memavail=641712 print_time=145.576 buffer_time=0.476 print_stall=0 extruder: target=0 temp=200.7 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1965693104: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:32:16 2024 (1713288736.4 1635.8)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.000002
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.85
stealthchop_threshold = 0

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1965804056: New connection
webhooks client 1965804056: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1641.0: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2421 bytes_read=5752 bytes_retransmit=0 bytes_invalid=0 send_seq=202 receive_seq=201 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002558  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.1 sysload=0.15 cputime=68.817 memavail=635144 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.5 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965804056
webhooks: registering remote method 'reboot_machine' for connection id: 1965804056
webhooks: registering remote method 'pause_job_queue' for connection id: 1965804056
webhooks: registering remote method 'start_job_queue' for connection id: 1965804056
Stats 1642.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2442 bytes_read=5969 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.9 sysload=0.15 cputime=68.888 memavail=639920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.5 pwm=0.000
Stats 1643.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2448 bytes_read=6117 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002551  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.15 cputime=68.942 memavail=639256 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.1 pwm=0.000
Stats 1644.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2454 bytes_read=6265 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002529  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.14 cputime=68.971 memavail=638248 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.7 pwm=0.000
Stats 1645.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2460 bytes_read=6457 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002468  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.2 sysload=0.14 cputime=69.000 memavail=638000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.5 pwm=0.000
Stats 1646.0: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2466 bytes_read=6605 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002541  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.14 cputime=69.029 memavail=638000 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.4 pwm=0.000
Stats 1647.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2472 bytes_read=6767 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002522  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.6 sysload=0.14 cputime=69.060 memavail=642032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.2 pwm=0.000
Stats 1648.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2478 bytes_read=6959 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002492  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.14 cputime=69.082 memavail=641508 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.9 pwm=0.000
Stats 1649.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2484 bytes_read=7107 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002582  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.13 cputime=69.108 memavail=641096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=194.5 pwm=0.000
Stats 1650.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2490 bytes_read=7255 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.13 cputime=69.135 memavail=642120 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.4 pwm=0.000
Stats 1651.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2496 bytes_read=7447 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002856  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.13 cputime=69.164 memavail=641152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=191.6 pwm=0.000
Stats 1652.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2502 bytes_read=7595 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002818  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.8 sysload=0.13 cputime=69.189 memavail=642396 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.5 pwm=0.000
Stats 1653.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2508 bytes_read=7757 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002783  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.13 cputime=69.210 memavail=641800 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.0 pwm=0.000
Stats 1654.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2514 bytes_read=7949 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002754  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.20 cputime=69.239 memavail=640696 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=187.6 pwm=0.000
Stats 1655.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2520 bytes_read=8097 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002754  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.1 sysload=0.20 cputime=69.264 memavail=640248 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.2 pwm=0.000
Stats 1656.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2526 bytes_read=8245 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002743  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=27.6 sysload=0.20 cputime=69.291 memavail=640024 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.0 pwm=0.000
Heater extruder approaching new target of 200.000
Stats 1657.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2548 bytes_read=8442 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002744  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.20 cputime=69.323 memavail=641856 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.3 pwm=1.000
Stats 1658.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2560 bytes_read=8604 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=221 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.5 sysload=0.20 cputime=69.346 memavail=641072 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.0 pwm=1.000
Stats 1659.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2566 bytes_read=8768 bytes_retransmit=0 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=0 srtt=0.004 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002761  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.18 cputime=69.373 memavail=640372 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.9 pwm=1.000
Stats 1660.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2572 bytes_read=8960 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=0 srtt=0.004 rttvar=0.002 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002747  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.18 cputime=69.403 memavail=640904 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.4 pwm=1.000
Stats 1661.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2594 bytes_read=9113 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.18 cputime=69.432 memavail=640204 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.0 pwm=1.000
Stats 1662.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2600 bytes_read=9261 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.18 cputime=69.460 memavail=642040 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.5 pwm=1.000
Stats 1663.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2606 bytes_read=9467 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.18 cputime=69.483 memavail=641516 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.2 pwm=1.000
Stats 1664.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2612 bytes_read=9615 bytes_retransmit=0 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.17 cputime=69.511 memavail=640816 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.2 pwm=1.000
Stats 1665.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2618 bytes_read=9778 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002741  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.17 cputime=69.542 memavail=641420 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.4 pwm=1.000
Stats 1666.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2640 bytes_read=9960 bytes_retransmit=0 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=69.573 memavail=641216 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=178.8 pwm=1.000
Stats 1667.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2646 bytes_read=10108 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.17 cputime=69.596 memavail=641216 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.2 pwm=1.000
Stats 1668.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2652 bytes_read=10285 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.17 cputime=69.618 memavail=640768 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=179.8 pwm=1.000
Stats 1669.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2658 bytes_read=10462 bytes_retransmit=0 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.8 sysload=0.23 cputime=69.647 memavail=640292 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=180.7 pwm=1.000
Stats 1670.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2680 bytes_read=10615 bytes_retransmit=0 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.9 sysload=0.23 cputime=69.676 memavail=639788 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=181.4 pwm=1.000
Stats 1671.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2686 bytes_read=10778 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.23 cputime=69.704 memavail=639568 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=182.3 pwm=1.000
Stats 1672.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2692 bytes_read=10955 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.0 sysload=0.23 cputime=69.732 memavail=637632 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=183.5 pwm=1.000
Stats 1673.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2698 bytes_read=11117 bytes_retransmit=0 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.23 cputime=69.754 memavail=641616 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=184.5 pwm=1.000
Stats 1674.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2736 bytes_read=11290 bytes_retransmit=0 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.22 cputime=69.786 memavail=640664 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=185.5 pwm=0.908
Stats 1675.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2742 bytes_read=11467 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.22 cputime=69.817 memavail=639992 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=186.7 pwm=0.908
Stats 1676.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2764 bytes_read=11620 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.22 cputime=69.844 memavail=639292 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=187.6 pwm=0.845
Stats 1677.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2786 bytes_read=11788 bytes_retransmit=0 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.22 cputime=69.872 memavail=639068 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=188.8 pwm=0.772
Stats 1678.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2803 bytes_read=11979 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.9 sysload=0.22 cputime=69.897 memavail=641392 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.0 pwm=0.763
Stats 1679.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2857 bytes_read=12142 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.20 cputime=69.926 memavail=641184 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.9 pwm=0.745
Stats 1680.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2879 bytes_read=12310 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=69.954 memavail=640736 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.8 pwm=0.639
Stats 1681.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2885 bytes_read=12487 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.3 sysload=0.20 cputime=69.986 memavail=640656 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.9 pwm=0.639
Stats 1682.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2907 bytes_read=12640 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.7 sysload=0.20 cputime=70.013 memavail=638188 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.5 pwm=0.708
Stats 1683.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2929 bytes_read=12822 bytes_retransmit=0 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.5 sysload=0.20 cputime=70.035 memavail=640752 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.3 pwm=0.620
Stats 1684.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2983 bytes_read=13014 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.18 cputime=70.064 memavail=641168 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.1 pwm=0.615
Heater extruder within range of 200.000
Stats 1685.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3021 bytes_read=13172 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.4 sysload=0.18 cputime=70.095 memavail=640740 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.5 pwm=0.676
Stats 1686.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3027 bytes_read=13335 bytes_retransmit=0 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.6 sysload=0.18 cputime=70.121 memavail=640044 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.1 pwm=0.676
Stats 1687.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3049 bytes_read=13517 bytes_retransmit=0 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.18 cputime=70.148 memavail=639820 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.5 pwm=0.728
Stats 1688.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3071 bytes_read=13684 bytes_retransmit=0 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.4 sysload=0.18 cputime=70.169 memavail=641388 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.8 pwm=0.675
Stats 1689.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3093 bytes_read=13852 bytes_retransmit=0 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=30.1 sysload=0.17 cputime=70.196 memavail=641160 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.3 pwm=0.608
Stats 1690.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3131 bytes_read=14039 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.5 sysload=0.17 cputime=70.226 memavail=640936 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.6 pwm=0.687
Stats 1691.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3185 bytes_read=14202 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.17 cputime=70.254 memavail=640236 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.1 pwm=0.605
Stats 1692.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3207 bytes_read=14370 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.17 cputime=70.284 memavail=638300 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.2 pwm=0.663
Stats 1693.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3245 bytes_read=14571 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=25.2 sysload=0.17 cputime=70.307 memavail=641100 print_time=19.839 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.6 pwm=0.668
Stats 1694.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3915 bytes_read=15088 bytes_retransmit=0 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.23 cputime=70.407 memavail=640176 print_time=73.597 buffer_time=16.511 print_stall=0 extruder: target=200 temp=199.0 pwm=0.578
Stats 1695.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3992 bytes_read=15307 bytes_retransmit=0 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.23 cputime=70.445 memavail=641164 print_time=73.597 buffer_time=15.509 print_stall=0 extruder: target=200 temp=199.3 pwm=0.472
Stats 1696.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4058 bytes_read=15533 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.23 cputime=70.483 memavail=640944 print_time=73.597 buffer_time=14.508 print_stall=0 extruder: target=200 temp=199.5 pwm=0.576
Stats 1697.0: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4140 bytes_read=15732 bytes_retransmit=0 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.0 sysload=0.23 cputime=70.519 memavail=640692 print_time=73.597 buffer_time=13.508 print_stall=0 extruder: target=200 temp=199.7 pwm=0.573
Stats 1698.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4217 bytes_read=15955 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.23 cputime=70.548 memavail=640948 print_time=73.597 buffer_time=12.507 print_stall=0 extruder: target=200 temp=199.5 pwm=0.674
Stats 1699.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4299 bytes_read=16181 bytes_retransmit=0 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.0 sysload=0.21 cputime=70.585 memavail=640724 print_time=73.597 buffer_time=11.507 print_stall=0 extruder: target=200 temp=199.5 pwm=0.740
Stats 1700.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4365 bytes_read=16384 bytes_retransmit=0 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.21 cputime=70.623 memavail=641092 print_time=73.597 buffer_time=10.506 print_stall=0 extruder: target=200 temp=199.3 pwm=0.756
Stats 1701.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4442 bytes_read=16603 bytes_retransmit=0 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.21 cputime=70.662 memavail=640420 print_time=73.597 buffer_time=9.505 print_stall=0 extruder: target=200 temp=199.3 pwm=0.706
Stats 1702.0: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4540 bytes_read=16841 bytes_retransmit=0 bytes_invalid=0 send_seq=356 receive_seq=355 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.21 cputime=70.703 memavail=638208 print_time=73.597 buffer_time=8.505 print_stall=0 extruder: target=200 temp=198.8 pwm=0.857
Stats 1703.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4601 bytes_read=17059 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.21 cputime=70.731 memavail=641128 print_time=73.597 buffer_time=7.504 print_stall=0 extruder: target=200 temp=198.9 pwm=0.798
Stats 1704.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4662 bytes_read=17273 bytes_retransmit=0 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.1 sysload=0.28 cputime=70.767 memavail=640904 print_time=73.597 buffer_time=6.503 print_stall=0 extruder: target=200 temp=198.7 pwm=0.904
Stats 1705.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4744 bytes_read=17511 bytes_retransmit=0 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.28 cputime=70.802 memavail=640680 print_time=73.597 buffer_time=5.502 print_stall=0 extruder: target=200 temp=198.9 pwm=0.746
Stats 1706.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4794 bytes_read=17710 bytes_retransmit=0 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=26.0 sysload=0.28 cputime=70.834 memavail=640232 print_time=73.597 buffer_time=4.501 print_stall=0 extruder: target=200 temp=198.7 pwm=0.867
Stats 1707.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4871 bytes_read=17929 bytes_retransmit=0 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.28 cputime=70.869 memavail=640232 print_time=73.597 buffer_time=3.500 print_stall=0 extruder: target=200 temp=198.9 pwm=0.776
Stats 1708.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=4953 bytes_read=18181 bytes_retransmit=0 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=31.0 sysload=0.28 cputime=70.896 memavail=640872 print_time=73.597 buffer_time=2.499 print_stall=0 extruder: target=200 temp=199.1 pwm=0.677
Stats 1709.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5035 bytes_read=18390 bytes_retransmit=0 bytes_invalid=0 send_seq=391 receive_seq=391 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.5 sysload=0.34 cputime=70.930 memavail=640176 print_time=73.597 buffer_time=1.498 print_stall=0 extruder: target=200 temp=199.2 pwm=0.655
Stats 1710.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5080 bytes_read=18614 bytes_retransmit=0 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.34 cputime=70.963 memavail=641064 print_time=73.597 buffer_time=0.497 print_stall=0 extruder: target=200 temp=199.1 pwm=0.815
Stats 1711.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5183 bytes_read=18837 bytes_retransmit=0 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.34 cputime=70.999 memavail=641104 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.743
Stats 1712.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5233 bytes_read=19036 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.34 cputime=71.034 memavail=638440 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.683
Stats 1713.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5278 bytes_read=19274 bytes_retransmit=0 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.2 sysload=0.34 cputime=71.074 memavail=638224 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.802
Stats 1714.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5360 bytes_read=19497 bytes_retransmit=0 bytes_invalid=0 send_seq=413 receive_seq=413 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.47 cputime=71.113 memavail=638024 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.618
Stats 1715.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5410 bytes_read=19696 bytes_retransmit=0 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.2 sysload=0.47 cputime=71.149 memavail=639996 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.0 pwm=0.689
Stats 1716.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5487 bytes_read=19930 bytes_retransmit=0 bytes_invalid=0 send_seq=422 receive_seq=422 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.8 sysload=0.47 cputime=71.184 memavail=638792 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.504
Stats 1717.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5553 bytes_read=20148 bytes_retransmit=0 bytes_invalid=0 send_seq=427 receive_seq=427 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.47 cputime=71.217 memavail=641668 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.572
Stats 1718.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5619 bytes_read=20366 bytes_retransmit=0 bytes_invalid=0 send_seq=432 receive_seq=432 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.47 cputime=71.243 memavail=641012 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.433
Stats 1719.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5702 bytes_read=20600 bytes_retransmit=0 bytes_invalid=0 send_seq=438 receive_seq=437 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.51 cputime=71.279 memavail=639516 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.2 pwm=0.373
Stats 1720.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5768 bytes_read=20834 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.51 cputime=71.313 memavail=641284 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.497
Stats 1721.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5834 bytes_read=21038 bytes_retransmit=0 bytes_invalid=0 send_seq=448 receive_seq=448 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.51 cputime=71.346 memavail=641292 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.2 pwm=0.494
Stats 1722.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=5884 bytes_read=21267 bytes_retransmit=0 bytes_invalid=0 send_seq=452 receive_seq=452 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002741  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.51 cputime=71.381 memavail=641484 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.4 pwm=0.427
Stats 1723.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5977 bytes_read=21504 bytes_retransmit=0 bytes_invalid=0 send_seq=458 receive_seq=458 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.51 cputime=71.409 memavail=640100 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.1 pwm=0.674
Stats 1724.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6043 bytes_read=21708 bytes_retransmit=0 bytes_invalid=0 send_seq=463 receive_seq=463 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.63 cputime=71.441 memavail=639624 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.6 pwm=0.342
Stats 1725.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6120 bytes_read=21942 bytes_retransmit=0 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.63 cputime=71.476 memavail=639624 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.748
Stats 1726.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6186 bytes_read=22160 bytes_retransmit=0 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.63 cputime=71.510 memavail=636396 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.636
Stats 1727.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6252 bytes_read=22364 bytes_retransmit=0 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.63 cputime=71.536 memavail=641448 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.592
Stats 1728.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6318 bytes_read=22612 bytes_retransmit=0 bytes_invalid=0 send_seq=483 receive_seq=483 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.63 cputime=71.565 memavail=641780 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.540
Stats 1729.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6416 bytes_read=22840 bytes_retransmit=0 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002751  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.4 sysload=0.74 cputime=71.599 memavail=641556 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.535
Stats 1730.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6498 bytes_read=23049 bytes_retransmit=0 bytes_invalid=0 send_seq=496 receive_seq=496 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002749  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.5 sysload=0.74 cputime=71.632 memavail=641304 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.9 pwm=0.499
Stats 1731.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6580 bytes_read=23288 bytes_retransmit=0 bytes_invalid=0 send_seq=502 receive_seq=502 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002745  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=27.8 sysload=0.74 cputime=71.667 memavail=641512 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.511
Stats 1732.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6678 bytes_read=23516 bytes_retransmit=0 bytes_invalid=0 send_seq=509 receive_seq=509 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002742  raspberry_pi: temp=53.7 heater_bed: target=0 temp=18.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.74 cputime=71.702 memavail=640976 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.4 pwm=0.709
Stats 1733.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6744 bytes_read=23734 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002741  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.74 cputime=71.725 memavail=641288 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.572
Stats 1734.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6789 bytes_read=23958 bytes_retransmit=0 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002740  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=31.8 sysload=0.76 cputime=71.760 memavail=641036 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.516
Stats 1735.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6855 bytes_read=24176 bytes_retransmit=0 bytes_invalid=0 send_seq=522 receive_seq=522 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.6 sysload=0.76 cputime=71.794 memavail=641652 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.515
Stats 1736.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6921 bytes_read=24380 bytes_retransmit=0 bytes_invalid=0 send_seq=527 receive_seq=527 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.8 sysload=0.76 cputime=71.828 memavail=641400 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.5 pwm=0.598
Stats 1737.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7003 bytes_read=24619 bytes_retransmit=0 bytes_invalid=0 send_seq=533 receive_seq=533 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.2 sysload=0.76 cputime=71.865 memavail=640684 print_time=73.597 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.6 pwm=0.461
Stats 1738.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7075 bytes_read=24815 bytes_retransmit=0 bytes_invalid=0 send_seq=538 receive_seq=538 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.3 sysload=0.76 cputime=71.891 memavail=641236 print_time=101.470 buffer_time=0.347 print_stall=0 extruder: target=0 temp=200.4 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1965804056: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:34:00 2024 (1713288840.1 1739.5)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.000002
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.9
stealthchop_threshold = 0

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1965459056: New connection
webhooks client 1965459056: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 1744.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2416 bytes_read=5747 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=200 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002201  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.72 cputime=74.669 memavail=637272 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.7 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965459056
webhooks: registering remote method 'reboot_machine' for connection id: 1965459056
webhooks: registering remote method 'pause_job_queue' for connection id: 1965459056
webhooks: registering remote method 'start_job_queue' for connection id: 1965459056
Stats 1745.6: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2437 bytes_read=5905 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002406  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.7 sysload=0.72 cputime=74.718 memavail=639140 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.4 pwm=0.000
Stats 1746.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2443 bytes_read=6112 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002092  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.72 cputime=74.761 memavail=638784 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.3 pwm=0.000
Stats 1747.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2449 bytes_read=6260 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002298  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.72 cputime=74.788 memavail=638196 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=200.5 pwm=0.000
Stats 1748.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2455 bytes_read=6408 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002306  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.0 sysload=0.67 cputime=74.814 memavail=636008 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.8 pwm=0.000
Stats 1749.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2461 bytes_read=6600 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002526  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.67 cputime=74.842 memavail=640840 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=198.4 pwm=0.000
Stats 1750.6: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000029 mcu_task_stddev=0.000035 bytes_write=2467 bytes_read=6748 bytes_retransmit=0 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002519  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.67 cputime=74.871 memavail=639940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.6 pwm=0.000
Stats 1751.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2473 bytes_read=6910 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002496  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.2 sysload=0.67 cputime=74.895 memavail=639932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.2 pwm=0.000
Stats 1752.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2495 bytes_read=7107 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002468  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.2 sysload=0.67 cputime=74.927 memavail=640436 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.3 pwm=1.000
Stats 1753.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2501 bytes_read=7255 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=55.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=26.7 sysload=0.61 cputime=74.961 memavail=639512 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.2 pwm=1.000
Stats 1754.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2507 bytes_read=7403 bytes_retransmit=0 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.61 cputime=74.993 memavail=639044 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.1 pwm=1.000
Stats 1755.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2513 bytes_read=7595 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002617  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.9 sysload=0.61 cputime=75.023 memavail=638596 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.9 pwm=1.000
Stats 1756.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2535 bytes_read=7762 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002614  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.4 sysload=0.61 cputime=75.046 memavail=641420 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.3 pwm=1.000
Stats 1757.6: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2541 bytes_read=7925 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.61 cputime=75.074 memavail=640720 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.9 pwm=1.000
Stats 1758.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2547 bytes_read=8102 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.56 cputime=75.102 memavail=640944 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.3 pwm=1.000
Stats 1759.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2553 bytes_read=8250 bytes_retransmit=0 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.56 cputime=75.130 memavail=640692 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.3 pwm=1.000
Stats 1760.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2581 bytes_read=8434 bytes_retransmit=0 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.56 cputime=75.160 memavail=640468 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=189.7 pwm=0.954
Stats 1761.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2635 bytes_read=8640 bytes_retransmit=0 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.6 sysload=0.56 cputime=75.184 memavail=640880 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.1 pwm=0.906
Stats 1762.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2657 bytes_read=8793 bytes_retransmit=0 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.9 sysload=0.56 cputime=75.213 memavail=640168 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=190.5 pwm=0.836
Stats 1763.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2679 bytes_read=8961 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.52 cputime=75.243 memavail=639720 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=191.0 pwm=0.739
Stats 1764.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2717 bytes_read=9148 bytes_retransmit=0 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.52 cputime=75.273 memavail=639020 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.0 pwm=0.593
Stats 1765.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2766 bytes_read=9306 bytes_retransmit=0 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.7 sysload=0.52 cputime=75.301 memavail=641644 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=192.6 pwm=0.609
Stats 1766.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2788 bytes_read=9488 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.5 sysload=0.52 cputime=75.324 memavail=641072 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=193.0 pwm=0.680
Stats 1767.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2826 bytes_read=9675 bytes_retransmit=0 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.3 sysload=0.52 cputime=75.349 memavail=640176 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.0 pwm=0.507
Stats 1768.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2864 bytes_read=9833 bytes_retransmit=0 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.48 cputime=75.379 memavail=639728 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.3 pwm=0.692
Stats 1769.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2902 bytes_read=10006 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.8 sysload=0.48 cputime=75.412 memavail=639280 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=194.7 pwm=0.690
Stats 1770.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2924 bytes_read=10188 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.48 cputime=75.446 memavail=640680 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.5 pwm=0.552
Stats 1771.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2978 bytes_read=10365 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.48 cputime=75.471 memavail=639224 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=195.6 pwm=0.731
Stats 1772.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3027 bytes_read=10538 bytes_retransmit=0 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.2 sysload=0.48 cputime=75.497 memavail=641132 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.1 pwm=0.557
Stats 1773.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3049 bytes_read=10720 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.8 sysload=0.44 cputime=75.525 memavail=640880 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.5 pwm=0.624
Stats 1774.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3087 bytes_read=10878 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.44 cputime=75.553 memavail=640656 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.7 pwm=0.634
Stats 1775.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3125 bytes_read=11051 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.3 sysload=0.44 cputime=75.581 memavail=640404 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=196.9 pwm=0.656
Stats 1776.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3163 bytes_read=11252 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.44 cputime=75.610 memavail=641692 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.4 pwm=0.554
Stats 1777.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3217 bytes_read=11415 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.44 cputime=75.640 memavail=640668 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.3 pwm=0.724
Stats 1778.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3271 bytes_read=11593 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=52.6 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.40 cputime=75.670 memavail=639968 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.598
Stats 1779.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3304 bytes_read=11775 bytes_retransmit=0 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.40 cputime=75.700 memavail=639520 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=197.7 pwm=0.746
Stats 1780.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3358 bytes_read=11938 bytes_retransmit=0 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.4 sysload=0.40 cputime=75.732 memavail=639072 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.1 pwm=0.532
Stats 1781.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3412 bytes_read=12130 bytes_retransmit=0 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.40 cputime=75.756 memavail=641296 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.4 pwm=0.504
Stats 1782.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3450 bytes_read=12317 bytes_retransmit=0 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.40 cputime=75.782 memavail=640596 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.4 pwm=0.575
Stats 1783.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3504 bytes_read=12480 bytes_retransmit=0 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.3 sysload=0.37 cputime=75.809 memavail=638648 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.5 pwm=0.605
Stats 1784.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3526 bytes_read=12648 bytes_retransmit=0 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.37 cputime=75.835 memavail=638648 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.542
Stats 1785.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3564 bytes_read=12835 bytes_retransmit=0 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.37 cputime=75.864 memavail=638216 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.584
Stats 1786.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3602 bytes_read=13007 bytes_retransmit=0 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.37 cputime=75.887 memavail=640808 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.533
Stats 1787.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3656 bytes_read=13185 bytes_retransmit=0 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.0 sysload=0.37 cputime=75.912 memavail=641340 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.1 pwm=0.617
Stats 1788.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3694 bytes_read=13372 bytes_retransmit=0 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.4 sysload=0.34 cputime=75.940 memavail=640612 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.555
Stats 1789.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3748 bytes_read=13535 bytes_retransmit=0 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.8 sysload=0.34 cputime=75.967 memavail=639912 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.553
Stats 1790.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3786 bytes_read=13708 bytes_retransmit=0 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.1 sysload=0.34 cputime=75.995 memavail=639436 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.525
Stats 1791.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3856 bytes_read=13914 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=318 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.34 cputime=76.019 memavail=641008 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.665
Stats 1792.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3894 bytes_read=14077 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.34 cputime=76.044 memavail=641000 print_time=11.501 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.3 pwm=0.742
Stats 1793.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4564 bytes_read=14609 bytes_retransmit=0 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.5 sysload=0.31 cputime=76.137 memavail=640300 print_time=69.475 buffer_time=16.481 print_stall=0 extruder: target=200 temp=199.7 pwm=0.585
Stats 1794.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4662 bytes_read=14852 bytes_retransmit=0 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.31 cputime=76.172 memavail=640076 print_time=69.475 buffer_time=15.480 print_stall=0 extruder: target=200 temp=199.8 pwm=0.589
Stats 1795.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4728 bytes_read=15056 bytes_retransmit=0 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.0 sysload=0.31 cputime=76.204 memavail=639376 print_time=69.475 buffer_time=14.479 print_stall=0 extruder: target=200 temp=199.7 pwm=0.656
Stats 1796.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4778 bytes_read=15285 bytes_retransmit=0 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.31 cputime=76.231 memavail=641148 print_time=69.475 buffer_time=13.479 print_stall=0 extruder: target=200 temp=200.0 pwm=0.490
Stats 1797.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4876 bytes_read=15528 bytes_retransmit=0 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=31.2 sysload=0.31 cputime=76.264 memavail=641440 print_time=69.475 buffer_time=12.478 print_stall=0 extruder: target=200 temp=199.5 pwm=0.777
Stats 1798.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=4942 bytes_read=15732 bytes_retransmit=0 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=33.7 sysload=0.29 cputime=76.298 memavail=640828 print_time=69.475 buffer_time=11.477 print_stall=0 extruder: target=200 temp=199.7 pwm=0.589
Stats 1799.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=5019 bytes_read=15946 bytes_retransmit=0 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.29 cputime=76.334 memavail=640380 print_time=69.475 buffer_time=10.476 print_stall=0 extruder: target=200 temp=199.3 pwm=0.749
Stats 1800.7: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000013 bytes_write=5080 bytes_read=16162 bytes_retransmit=0 bytes_invalid=0 send_seq=385 receive_seq=385 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.29 cputime=76.373 memavail=640920 print_time=69.475 buffer_time=9.475 print_stall=0 extruder: target=200 temp=199.0 pwm=0.754
Stats 1801.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5146 bytes_read=16370 bytes_retransmit=0 bytes_invalid=0 send_seq=390 receive_seq=390 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=31.2 sysload=0.29 cputime=76.402 memavail=641488 print_time=69.475 buffer_time=8.475 print_stall=0 extruder: target=200 temp=198.9 pwm=0.747
Stats 1802.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5207 bytes_read=16587 bytes_retransmit=0 bytes_invalid=0 send_seq=394 receive_seq=394 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.8 sysload=0.29 cputime=76.434 memavail=641120 print_time=69.475 buffer_time=7.474 print_stall=0 extruder: target=200 temp=198.8 pwm=0.747
Stats 1803.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5289 bytes_read=16808 bytes_retransmit=0 bytes_invalid=0 send_seq=400 receive_seq=400 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=26.1 sysload=0.29 cputime=76.470 memavail=640420 print_time=69.475 buffer_time=6.474 print_stall=0 extruder: target=200 temp=198.5 pwm=0.835
Stats 1804.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5350 bytes_read=17007 bytes_retransmit=0 bytes_invalid=0 send_seq=404 receive_seq=404 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.4 sysload=0.26 cputime=76.503 memavail=641004 print_time=69.475 buffer_time=5.473 print_stall=0 extruder: target=200 temp=198.6 pwm=0.777
Stats 1805.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5411 bytes_read=17236 bytes_retransmit=0 bytes_invalid=0 send_seq=408 receive_seq=408 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.26 cputime=76.536 memavail=640052 print_time=69.475 buffer_time=4.473 print_stall=0 extruder: target=200 temp=198.6 pwm=0.706
Stats 1806.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5445 bytes_read=17458 bytes_retransmit=0 bytes_invalid=0 send_seq=411 receive_seq=411 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=27.3 sysload=0.26 cputime=76.563 memavail=641176 print_time=69.475 buffer_time=3.472 print_stall=0 extruder: target=200 temp=198.7 pwm=0.706
Stats 1807.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5511 bytes_read=17662 bytes_retransmit=0 bytes_invalid=0 send_seq=416 receive_seq=416 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.0 sysload=0.26 cputime=76.594 memavail=640448 print_time=69.475 buffer_time=2.471 print_stall=0 extruder: target=200 temp=198.5 pwm=0.891
Stats 1808.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5588 bytes_read=17896 bytes_retransmit=0 bytes_invalid=0 send_seq=421 receive_seq=421 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.26 cputime=76.629 memavail=639776 print_time=69.475 buffer_time=1.471 print_stall=0 extruder: target=200 temp=198.7 pwm=0.767
Stats 1809.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5654 bytes_read=18114 bytes_retransmit=0 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.24 cputime=76.664 memavail=639328 print_time=69.475 buffer_time=0.470 print_stall=0 extruder: target=200 temp=198.9 pwm=0.727
Stats 1810.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5741 bytes_read=18318 bytes_retransmit=0 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.6 sysload=0.24 cputime=76.699 memavail=639104 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=198.8 pwm=0.851
Stats 1811.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5797 bytes_read=18556 bytes_retransmit=0 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.24 cputime=76.726 memavail=641344 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.2 pwm=0.616
Stats 1812.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5879 bytes_read=18779 bytes_retransmit=0 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.24 cputime=76.756 memavail=640616 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.4 pwm=0.539
Stats 1813.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5945 bytes_read=18983 bytes_retransmit=0 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.24 cputime=76.789 memavail=641340 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.5 pwm=0.607
Stats 1814.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6011 bytes_read=19217 bytes_retransmit=0 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002742  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.22 cputime=76.824 memavail=640644 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=199.9 pwm=0.555
Stats 1815.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6109 bytes_read=19445 bytes_retransmit=0 bytes_invalid=0 send_seq=457 receive_seq=457 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.22 cputime=76.859 memavail=639972 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.2 pwm=0.458
Stats 1816.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6159 bytes_read=19658 bytes_retransmit=0 bytes_invalid=0 send_seq=461 receive_seq=461 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.22 cputime=76.885 memavail=641524 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.3 pwm=0.520
Stats 1817.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6204 bytes_read=19882 bytes_retransmit=0 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.8 sysload=0.22 cputime=76.915 memavail=640320 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.354
Stats 1818.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6265 bytes_read=20095 bytes_retransmit=0 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.9 sysload=0.22 cputime=76.948 memavail=639872 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.7 pwm=0.571
Stats 1819.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6299 bytes_read=20289 bytes_retransmit=0 bytes_invalid=0 send_seq=471 receive_seq=471 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=18.9 pwm=0.000 mcu_temp: temp=31.2 sysload=0.20 cputime=76.980 memavail=639648 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.571
Stats 1820.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6376 bytes_read=20523 bytes_retransmit=0 bytes_invalid=0 send_seq=476 receive_seq=476 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.20 cputime=77.015 memavail=641716 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.2 pwm=0.357
Stats 1821.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6480 bytes_read=20781 bytes_retransmit=0 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.20 cputime=77.042 memavail=641144 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=200.8 pwm=0.705
Stats 1822.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6546 bytes_read=20985 bytes_retransmit=0 bytes_invalid=0 send_seq=489 receive_seq=489 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.20 cputime=77.074 memavail=640448 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.2 pwm=0.431
Stats 1823.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6596 bytes_read=21214 bytes_retransmit=0 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.20 cputime=77.106 memavail=641228 print_time=69.475 buffer_time=0.000 print_stall=0 extruder: target=200 temp=201.0 pwm=0.541
Heater extruder approaching new target of 210.000
Stats 1824.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6662 bytes_read=21432 bytes_retransmit=0 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=27.7 sysload=0.19 cputime=77.145 memavail=640536 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.2 pwm=1.000
Stats 1825.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6696 bytes_read=21626 bytes_retransmit=0 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.19 cputime=77.178 memavail=639864 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.0 pwm=1.000
Stats 1826.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6730 bytes_read=21864 bytes_retransmit=0 bytes_invalid=0 send_seq=504 receive_seq=504 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.1 sysload=0.19 cputime=77.205 memavail=641292 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=200.9 pwm=1.000
Stats 1827.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6764 bytes_read=22072 bytes_retransmit=0 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.9 sysload=0.19 cputime=77.236 memavail=641380 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.0 pwm=1.000
Stats 1828.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6814 bytes_read=22271 bytes_retransmit=0 bytes_invalid=0 send_seq=511 receive_seq=511 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.19 cputime=77.267 memavail=640876 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.4 pwm=1.000
Stats 1829.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6848 bytes_read=22495 bytes_retransmit=0 bytes_invalid=0 send_seq=514 receive_seq=514 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.17 cputime=77.300 memavail=640876 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.8 pwm=1.000
Stats 1830.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6882 bytes_read=22703 bytes_retransmit=0 bytes_invalid=0 send_seq=517 receive_seq=517 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.17 cputime=77.332 memavail=639956 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.3 pwm=1.000
Stats 1831.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6916 bytes_read=22911 bytes_retransmit=0 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002743  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.2 sysload=0.17 cputime=77.359 memavail=641372 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.7 pwm=1.000
Stats 1832.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6961 bytes_read=23135 bytes_retransmit=0 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002741  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.17 cputime=77.391 memavail=640420 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=203.3 pwm=0.985
Stats 1833.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=6995 bytes_read=23343 bytes_retransmit=0 bytes_invalid=0 send_seq=526 receive_seq=526 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.17 cputime=77.426 memavail=640632 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=204.0 pwm=0.985
Stats 1834.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7077 bytes_read=23552 bytes_retransmit=0 bytes_invalid=0 send_seq=532 receive_seq=532 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.16 cputime=77.460 memavail=640164 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=204.8 pwm=0.798
Stats 1835.7: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7154 bytes_read=23786 bytes_retransmit=0 bytes_invalid=0 send_seq=537 receive_seq=537 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.16 cputime=77.494 memavail=641940 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.4 pwm=0.773
Heater extruder within range of 210.000
Stats 1836.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7236 bytes_read=24023 bytes_retransmit=0 bytes_invalid=0 send_seq=543 receive_seq=543 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.16 cputime=77.520 memavail=640936 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.5 pwm=0.712
Stats 1837.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7286 bytes_read=24222 bytes_retransmit=0 bytes_invalid=0 send_seq=547 receive_seq=547 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.16 cputime=77.554 memavail=639984 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=207.0 pwm=0.777
Stats 1838.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7363 bytes_read=24456 bytes_retransmit=0 bytes_invalid=0 send_seq=552 receive_seq=552 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.16 cputime=77.589 memavail=640952 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=207.7 pwm=0.697
Stats 1839.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7445 bytes_read=24679 bytes_retransmit=0 bytes_invalid=0 send_seq=558 receive_seq=558 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.23 cputime=77.624 memavail=640484 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.7 pwm=0.521
Stats 1840.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7495 bytes_read=24878 bytes_retransmit=0 bytes_invalid=0 send_seq=562 receive_seq=562 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.0 sysload=0.23 cputime=77.656 memavail=640036 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.450
Stats 1841.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7556 bytes_read=25121 bytes_retransmit=0 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.23 cputime=77.683 memavail=641008 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.271
Stats 1842.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7649 bytes_read=25344 bytes_retransmit=0 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.2 sysload=0.23 cputime=77.718 memavail=640376 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.592
Stats 1843.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7683 bytes_read=25538 bytes_retransmit=0 bytes_invalid=0 send_seq=575 receive_seq=575 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=32.4 sysload=0.23 cputime=77.750 memavail=639424 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.592
Stats 1844.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7760 bytes_read=25772 bytes_retransmit=0 bytes_invalid=0 send_seq=580 receive_seq=580 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.37 cputime=77.784 memavail=639200 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.531
Stats 1845.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7853 bytes_read=25995 bytes_retransmit=0 bytes_invalid=0 send_seq=586 receive_seq=586 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=25.1 sysload=0.37 cputime=77.818 memavail=639208 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.655
Stats 1846.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7919 bytes_read=26213 bytes_retransmit=0 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.37 cputime=77.844 memavail=639076 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.583
Stats 1847.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7996 bytes_read=26447 bytes_retransmit=0 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.2 sysload=0.37 cputime=77.893 memavail=634732 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.5 pwm=0.485
Stats 1848.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8094 bytes_read=26675 bytes_retransmit=0 bytes_invalid=0 send_seq=603 receive_seq=603 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.3 sysload=0.37 cputime=77.935 memavail=637184 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.3 pwm=0.661
Stats 1849.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8171 bytes_read=26879 bytes_retransmit=0 bytes_invalid=0 send_seq=608 receive_seq=608 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.9 sysload=0.50 cputime=77.972 memavail=636960 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.689
Stats 1850.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8232 bytes_read=27108 bytes_retransmit=0 bytes_invalid=0 send_seq=612 receive_seq=612 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.50 cputime=78.006 memavail=636736 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.5 pwm=0.560
Stats 1851.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8330 bytes_read=27350 bytes_retransmit=0 bytes_invalid=0 send_seq=619 receive_seq=619 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=32.9 sysload=0.50 cputime=78.033 memavail=640496 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.784
Stats 1852.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8396 bytes_read=27554 bytes_retransmit=0 bytes_invalid=0 send_seq=624 receive_seq=624 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.5 sysload=0.50 cputime=78.068 memavail=640496 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.739
Stats 1853.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8446 bytes_read=27783 bytes_retransmit=0 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.50 cputime=78.105 memavail=640208 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.660
Stats 1854.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8528 bytes_read=28006 bytes_retransmit=0 bytes_invalid=0 send_seq=634 receive_seq=634 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=29.3 sysload=0.54 cputime=78.143 memavail=640124 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.3 pwm=0.582
Stats 1855.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8610 bytes_read=28215 bytes_retransmit=0 bytes_invalid=0 send_seq=640 receive_seq=640 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.54 cputime=78.175 memavail=641056 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.3 pwm=0.616
Stats 1856.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8682 bytes_read=28458 bytes_retransmit=0 bytes_invalid=0 send_seq=644 receive_seq=644 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.54 cputime=78.201 memavail=641256 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.845
Stats 1857.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8764 bytes_read=28681 bytes_retransmit=0 bytes_invalid=0 send_seq=650 receive_seq=650 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.3 sysload=0.54 cputime=78.234 memavail=640568 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.628
Stats 1858.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8846 bytes_read=28890 bytes_retransmit=0 bytes_invalid=0 send_seq=656 receive_seq=656 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.54 cputime=78.271 memavail=640092 print_time=83.497 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.6 pwm=0.434
Stats 1859.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9231 bytes_read=29151 bytes_retransmit=0 bytes_invalid=0 send_seq=666 receive_seq=666 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.3 sysload=0.58 cputime=78.338 memavail=640092 print_time=135.839 buffer_time=16.800 print_stall=0 extruder: target=210 temp=211.1 pwm=0.632
Stats 1860.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9329 bytes_read=29345 bytes_retransmit=0 bytes_invalid=0 send_seq=671 receive_seq=671 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.58 cputime=78.378 memavail=641016 print_time=135.839 buffer_time=15.799 print_stall=0 extruder: target=210 temp=211.2 pwm=0.636
Stats 1861.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9411 bytes_read=29559 bytes_retransmit=0 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=26.0 sysload=0.58 cputime=78.407 memavail=639412 print_time=135.839 buffer_time=14.798 print_stall=0 extruder: target=210 temp=210.9 pwm=0.732
Stats 1862.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9477 bytes_read=29797 bytes_retransmit=0 bytes_invalid=0 send_seq=682 receive_seq=682 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=11 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=28.2 sysload=0.58 cputime=78.444 memavail=640448 print_time=135.839 buffer_time=13.798 print_stall=0 extruder: target=210 temp=211.0 pwm=0.659
Stats 1863.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9570 bytes_read=30006 bytes_retransmit=0 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.58 cputime=78.478 memavail=639972 print_time=135.839 buffer_time=12.796 print_stall=0 extruder: target=210 temp=210.6 pwm=0.843
Stats 1864.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9652 bytes_read=30215 bytes_retransmit=0 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.53 cputime=78.514 memavail=639272 print_time=135.839 buffer_time=11.790 print_stall=0 extruder: target=210 temp=210.6 pwm=0.726
Stats 1865.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=9718 bytes_read=30463 bytes_retransmit=0 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.53 cputime=78.554 memavail=638824 print_time=135.839 buffer_time=10.789 print_stall=0 extruder: target=210 temp=210.3 pwm=0.737
Stats 1866.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9800 bytes_read=30686 bytes_retransmit=0 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.53 cputime=78.582 memavail=641340 print_time=135.839 buffer_time=9.788 print_stall=0 extruder: target=210 temp=210.1 pwm=0.786
Stats 1867.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9866 bytes_read=30890 bytes_retransmit=0 bytes_invalid=0 send_seq=710 receive_seq=710 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.53 cputime=78.614 memavail=640636 print_time=135.839 buffer_time=8.787 print_stall=0 extruder: target=210 temp=209.7 pwm=0.787
Stats 1868.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9932 bytes_read=31138 bytes_retransmit=0 bytes_invalid=0 send_seq=715 receive_seq=715 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.1 sysload=0.53 cputime=78.653 memavail=640620 print_time=135.839 buffer_time=7.787 print_stall=0 extruder: target=210 temp=209.2 pwm=0.975
Stats 1869.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10030 bytes_read=31352 bytes_retransmit=0 bytes_invalid=0 send_seq=722 receive_seq=722 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.57 cputime=78.689 memavail=640612 print_time=135.839 buffer_time=6.786 print_stall=0 extruder: target=210 temp=208.9 pwm=1.000
Stats 1870.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10091 bytes_read=31551 bytes_retransmit=0 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.57 cputime=78.725 memavail=639940 print_time=135.839 buffer_time=5.785 print_stall=0 extruder: target=210 temp=208.9 pwm=0.959
Stats 1871.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10157 bytes_read=31813 bytes_retransmit=0 bytes_invalid=0 send_seq=731 receive_seq=731 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.57 cputime=78.755 memavail=638568 print_time=135.839 buffer_time=4.784 print_stall=0 extruder: target=210 temp=208.8 pwm=0.896
Stats 1872.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10223 bytes_read=32017 bytes_retransmit=0 bytes_invalid=0 send_seq=736 receive_seq=736 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=23.0 pwm=0.000 mcu_temp: temp=31.7 sysload=0.57 cputime=78.786 memavail=637868 print_time=135.839 buffer_time=3.784 print_stall=0 extruder: target=210 temp=208.6 pwm=1.000
Stats 1873.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10289 bytes_read=32221 bytes_retransmit=0 bytes_invalid=0 send_seq=741 receive_seq=741 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.57 cputime=78.821 memavail=637644 print_time=135.839 buffer_time=2.783 print_stall=0 extruder: target=210 temp=209.1 pwm=0.643
Stats 1874.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10371 bytes_read=32474 bytes_retransmit=0 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=32.4 sysload=0.52 cputime=78.858 memavail=637208 print_time=135.839 buffer_time=1.783 print_stall=0 extruder: target=210 temp=209.2 pwm=0.695
Stats 1875.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10421 bytes_read=32673 bytes_retransmit=0 bytes_invalid=0 send_seq=751 receive_seq=751 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.52 cputime=78.890 memavail=636760 print_time=135.839 buffer_time=0.782 print_stall=0 extruder: target=210 temp=209.1 pwm=0.779
Stats 1876.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=10524 bytes_read=32896 bytes_retransmit=0 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.52 cputime=78.917 memavail=641076 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.9 pwm=0.954
Stats 1877.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=10585 bytes_read=33139 bytes_retransmit=0 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.7 sysload=0.52 cputime=78.952 memavail=640376 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.3 pwm=0.682
Stats 1878.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=10619 bytes_read=33333 bytes_retransmit=0 bytes_invalid=0 send_seq=764 receive_seq=764 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.9 sysload=0.52 cputime=78.985 memavail=640852 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.682
Stats 1879.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=10669 bytes_read=33547 bytes_retransmit=0 bytes_invalid=0 send_seq=768 receive_seq=768 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.3 sysload=0.56 cputime=79.019 memavail=640628 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.602
Stats 1880.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=10751 bytes_read=33785 bytes_retransmit=0 bytes_invalid=0 send_seq=774 receive_seq=774 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.56 cputime=79.057 memavail=639452 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.767
Stats 1881.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10833 bytes_read=34008 bytes_retransmit=0 bytes_invalid=0 send_seq=780 receive_seq=780 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.56 cputime=79.082 memavail=641480 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.483
Stats 1882.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10921 bytes_read=34232 bytes_retransmit=0 bytes_invalid=0 send_seq=787 receive_seq=786 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.56 cputime=79.113 memavail=641000 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.645
Stats 1883.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10998 bytes_read=34481 bytes_retransmit=0 bytes_invalid=0 send_seq=792 receive_seq=792 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.56 cputime=79.151 memavail=640524 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.493
Stats 1884.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11064 bytes_read=34685 bytes_retransmit=0 bytes_invalid=0 send_seq=797 receive_seq=797 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.52 cputime=79.186 memavail=641184 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.680
Stats 1885.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11114 bytes_read=34899 bytes_retransmit=0 bytes_invalid=0 send_seq=801 receive_seq=801 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.52 cputime=79.221 memavail=640492 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.554
Stats 1886.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11148 bytes_read=35136 bytes_retransmit=0 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.52 cputime=79.250 memavail=640936 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.554
Stats 1887.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11214 bytes_read=35340 bytes_retransmit=0 bytes_invalid=0 send_seq=809 receive_seq=809 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.52 cputime=79.288 memavail=641128 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.575
Stats 1888.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11280 bytes_read=35559 bytes_retransmit=0 bytes_invalid=0 send_seq=814 receive_seq=814 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.9 sysload=0.52 cputime=79.323 memavail=640400 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.571
Stats 1889.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11346 bytes_read=35792 bytes_retransmit=0 bytes_invalid=0 send_seq=819 receive_seq=819 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.47 cputime=79.358 memavail=640176 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.5 pwm=0.393
Stats 1890.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11444 bytes_read=36006 bytes_retransmit=0 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.47 cputime=79.393 memavail=639952 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.546
Stats 1891.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11526 bytes_read=36244 bytes_retransmit=0 bytes_invalid=0 send_seq=832 receive_seq=832 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.0 sysload=0.47 cputime=79.421 memavail=641264 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.479
Stats 1892.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11592 bytes_read=36477 bytes_retransmit=0 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.47 cputime=79.452 memavail=641552 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.733
Stats 1893.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11690 bytes_read=36691 bytes_retransmit=0 bytes_invalid=0 send_seq=844 receive_seq=844 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.8 sysload=0.47 cputime=79.486 memavail=640576 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.521
Stats 1894.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11767 bytes_read=36910 bytes_retransmit=0 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=26.9 sysload=0.44 cputime=79.518 memavail=640128 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.559
Stats 1895.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11817 bytes_read=37138 bytes_retransmit=0 bytes_invalid=0 send_seq=853 receive_seq=853 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.7 sysload=0.44 cputime=79.552 memavail=639680 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.622
Stats 1896.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11883 bytes_read=37356 bytes_retransmit=0 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.1 sysload=0.44 cputime=79.576 memavail=641360 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.662
Stats 1897.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11965 bytes_read=37580 bytes_retransmit=0 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.44 cputime=79.607 memavail=640656 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.699
Stats 1898.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12047 bytes_read=37818 bytes_retransmit=0 bytes_invalid=0 send_seq=870 receive_seq=870 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.44 cputime=79.643 memavail=639956 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.570
Stats 1899.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12129 bytes_read=38027 bytes_retransmit=0 bytes_invalid=0 send_seq=876 receive_seq=876 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.40 cputime=79.678 memavail=639732 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.572
Stats 1900.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12195 bytes_read=38246 bytes_retransmit=0 bytes_invalid=0 send_seq=881 receive_seq=881 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.40 cputime=79.714 memavail=639260 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.394
Stats 1901.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12256 bytes_read=38488 bytes_retransmit=0 bytes_invalid=0 send_seq=885 receive_seq=885 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.40 cputime=79.742 memavail=641132 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.749
Stats 1902.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12322 bytes_read=38692 bytes_retransmit=0 bytes_invalid=0 send_seq=890 receive_seq=890 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.5 sysload=0.40 cputime=79.775 memavail=640656 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.578
Stats 1903.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12367 bytes_read=38901 bytes_retransmit=0 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.40 cputime=79.807 memavail=641760 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.412
Stats 1904.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12433 bytes_read=39134 bytes_retransmit=0 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.1 sysload=0.37 cputime=79.838 memavail=641396 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.636
Stats 1905.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12499 bytes_read=39338 bytes_retransmit=0 bytes_invalid=0 send_seq=903 receive_seq=903 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.8 sysload=0.37 cputime=79.869 memavail=641952 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.665
Stats 1906.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12560 bytes_read=39566 bytes_retransmit=0 bytes_invalid=0 send_seq=907 receive_seq=907 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.3 sysload=0.37 cputime=79.894 memavail=640880 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.680
Stats 1907.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12626 bytes_read=39799 bytes_retransmit=0 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.37 cputime=79.926 memavail=640628 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.778
Stats 1908.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12708 bytes_read=40008 bytes_retransmit=0 bytes_invalid=0 send_seq=918 receive_seq=918 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.9 sysload=0.37 cputime=79.960 memavail=641088 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.424
Stats 1909.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12769 bytes_read=40222 bytes_retransmit=0 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.42 cputime=79.993 memavail=640160 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.636
Stats 1910.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12835 bytes_read=40455 bytes_retransmit=0 bytes_invalid=0 send_seq=927 receive_seq=927 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.42 cputime=80.028 memavail=639208 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.603
Stats 1911.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12885 bytes_read=40668 bytes_retransmit=0 bytes_invalid=0 send_seq=931 receive_seq=931 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.5 sysload=0.42 cputime=80.063 memavail=639336 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.603
Stats 1912.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12962 bytes_read=40887 bytes_retransmit=0 bytes_invalid=0 send_seq=936 receive_seq=936 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.2 sysload=0.42 cputime=80.102 memavail=640664 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.555
Stats 1913.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13044 bytes_read=41125 bytes_retransmit=0 bytes_invalid=0 send_seq=942 receive_seq=942 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.9 sysload=0.42 cputime=80.145 memavail=640188 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.463
Stats 1914.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13110 bytes_read=41329 bytes_retransmit=0 bytes_invalid=0 send_seq=947 receive_seq=947 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.7 sysload=0.39 cputime=80.180 memavail=640480 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.581
Stats 1915.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13166 bytes_read=41538 bytes_retransmit=0 bytes_invalid=0 send_seq=950 receive_seq=950 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.39 cputime=80.215 memavail=640056 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.578
Stats 1916.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13248 bytes_read=41790 bytes_retransmit=0 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.39 cputime=80.253 memavail=641168 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.759
Stats 1917.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13346 bytes_read=42004 bytes_retransmit=0 bytes_invalid=0 send_seq=963 receive_seq=963 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.6 sysload=0.39 cputime=80.293 memavail=640760 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.677
Stats 1918.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13423 bytes_read=42219 bytes_retransmit=0 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.8 sysload=0.39 cputime=80.332 memavail=640620 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.576
Stats 1919.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13489 bytes_read=42439 bytes_retransmit=0 bytes_invalid=0 send_seq=973 receive_seq=973 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.35 cputime=80.373 memavail=639920 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.563
Stats 1920.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13571 bytes_read=42638 bytes_retransmit=0 bytes_invalid=0 send_seq=979 receive_seq=979 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.35 cputime=80.407 memavail=640900 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.578
Stats 1921.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13648 bytes_read=42860 bytes_retransmit=0 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.35 cputime=80.434 memavail=641080 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.645
Stats 1922.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13741 bytes_read=43087 bytes_retransmit=0 bytes_invalid=0 send_seq=990 receive_seq=989 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.35 cputime=80.468 memavail=639904 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.571
Stats 1923.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13807 bytes_read=43296 bytes_retransmit=0 bytes_invalid=0 send_seq=995 receive_seq=995 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.35 cputime=80.504 memavail=640104 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.463
Stats 1924.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13873 bytes_read=43515 bytes_retransmit=0 bytes_invalid=0 send_seq=1000 receive_seq=1000 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.33 cputime=80.538 memavail=639660 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.773
Stats 1925.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13923 bytes_read=43743 bytes_retransmit=0 bytes_invalid=0 send_seq=1004 receive_seq=1004 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.33 cputime=80.572 memavail=638428 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.612
Stats 1926.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14000 bytes_read=43961 bytes_retransmit=0 bytes_invalid=0 send_seq=1009 receive_seq=1009 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.33 cputime=80.596 memavail=641012 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.656
Stats 1927.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14077 bytes_read=44180 bytes_retransmit=0 bytes_invalid=0 send_seq=1014 receive_seq=1014 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.6 sysload=0.33 cputime=80.628 memavail=640380 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.626
Stats 1928.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14127 bytes_read=44408 bytes_retransmit=0 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.33 cputime=80.661 memavail=640820 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.466
Stats 1929.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14193 bytes_read=44612 bytes_retransmit=0 bytes_invalid=0 send_seq=1023 receive_seq=1023 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.5 sysload=0.30 cputime=80.692 memavail=639896 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.531
Stats 1930.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14254 bytes_read=44826 bytes_retransmit=0 bytes_invalid=0 send_seq=1027 receive_seq=1027 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.30 cputime=80.727 memavail=639896 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.573
Stats 1931.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14352 bytes_read=45083 bytes_retransmit=0 bytes_invalid=0 send_seq=1034 receive_seq=1034 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.30 cputime=80.755 memavail=641360 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.477
Stats 1932.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14434 bytes_read=45292 bytes_retransmit=0 bytes_invalid=0 send_seq=1040 receive_seq=1040 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.3 sysload=0.30 cputime=80.788 memavail=641104 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.542
Stats 1933.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14484 bytes_read=45506 bytes_retransmit=0 bytes_invalid=0 send_seq=1044 receive_seq=1044 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.30 cputime=80.822 memavail=640704 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.699
Stats 1934.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14582 bytes_read=45749 bytes_retransmit=0 bytes_invalid=0 send_seq=1051 receive_seq=1051 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.4 sysload=0.27 cputime=80.862 memavail=639752 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.727
Stats 1935.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14648 bytes_read=45953 bytes_retransmit=0 bytes_invalid=0 send_seq=1056 receive_seq=1056 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.27 cputime=80.893 memavail=639304 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.824
Stats 1936.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14709 bytes_read=46181 bytes_retransmit=0 bytes_invalid=0 send_seq=1060 receive_seq=1060 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.27 cputime=80.919 memavail=641112 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.637
Stats 1937.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14807 bytes_read=46424 bytes_retransmit=0 bytes_invalid=0 send_seq=1067 receive_seq=1067 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.27 cputime=80.955 memavail=641076 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.782
Stats 1938.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14873 bytes_read=46628 bytes_retransmit=0 bytes_invalid=0 send_seq=1072 receive_seq=1072 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.27 cputime=80.988 memavail=640600 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.650
Stats 1939.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14934 bytes_read=46857 bytes_retransmit=0 bytes_invalid=0 send_seq=1076 receive_seq=1076 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.5 sysload=0.25 cputime=81.020 memavail=640600 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.645
Stats 1940.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15000 bytes_read=47075 bytes_retransmit=0 bytes_invalid=0 send_seq=1081 receive_seq=1081 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.25 cputime=81.055 memavail=640124 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.700
Stats 1941.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15082 bytes_read=47298 bytes_retransmit=0 bytes_invalid=0 send_seq=1087 receive_seq=1087 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.25 cputime=81.080 memavail=641720 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.572
Stats 1942.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15132 bytes_read=47527 bytes_retransmit=0 bytes_invalid=0 send_seq=1091 receive_seq=1091 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.0 sysload=0.25 cputime=81.116 memavail=640808 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.640
Stats 1943.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15214 bytes_read=47750 bytes_retransmit=0 bytes_invalid=0 send_seq=1097 receive_seq=1097 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.3 sysload=0.25 cputime=81.154 memavail=641024 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.607
Stats 1944.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15286 bytes_read=47970 bytes_retransmit=0 bytes_invalid=0 send_seq=1103 receive_seq=1103 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.23 cputime=81.191 memavail=640576 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.818
Stats 1945.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15352 bytes_read=48204 bytes_retransmit=0 bytes_invalid=0 send_seq=1108 receive_seq=1108 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.1 sysload=0.23 cputime=81.227 memavail=639848 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.518
Stats 1946.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15434 bytes_read=48441 bytes_retransmit=0 bytes_invalid=0 send_seq=1114 receive_seq=1114 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.23 cputime=81.253 memavail=640848 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.558
Stats 1947.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15500 bytes_read=48645 bytes_retransmit=0 bytes_invalid=0 send_seq=1119 receive_seq=1119 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.23 cputime=81.289 memavail=641228 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.567
Stats 1948.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15566 bytes_read=48879 bytes_retransmit=0 bytes_invalid=0 send_seq=1124 receive_seq=1124 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.3 sysload=0.23 cputime=81.327 memavail=640276 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.642
Stats 1949.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15664 bytes_read=49107 bytes_retransmit=0 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=31.5 sysload=0.21 cputime=81.361 memavail=640052 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.727
Stats 1950.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15730 bytes_read=49311 bytes_retransmit=0 bytes_invalid=0 send_seq=1136 receive_seq=1136 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.21 cputime=81.396 memavail=639356 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.621
Stats 1951.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15796 bytes_read=49559 bytes_retransmit=0 bytes_invalid=0 send_seq=1141 receive_seq=1141 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.2 sysload=0.21 cputime=81.423 memavail=641048 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.549
Stats 1952.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15862 bytes_read=49777 bytes_retransmit=0 bytes_invalid=0 send_seq=1146 receive_seq=1146 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.4 sysload=0.21 cputime=81.459 memavail=640316 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.727
Stats 1953.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15928 bytes_read=49981 bytes_retransmit=0 bytes_invalid=0 send_seq=1151 receive_seq=1151 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.21 cputime=81.493 memavail=640092 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.597
Stats 1954.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15989 bytes_read=50210 bytes_retransmit=0 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.7 sysload=0.28 cputime=81.530 memavail=641396 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.482
Stats 1955.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16055 bytes_read=50428 bytes_retransmit=0 bytes_invalid=0 send_seq=1160 receive_seq=1160 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.4 sysload=0.28 cputime=81.565 memavail=640920 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.616
Stats 1956.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16137 bytes_read=50651 bytes_retransmit=0 bytes_invalid=0 send_seq=1166 receive_seq=1166 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.2 sysload=0.28 cputime=81.591 memavail=640500 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.718
Stats 1957.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16214 bytes_read=50885 bytes_retransmit=0 bytes_invalid=0 send_seq=1171 receive_seq=1171 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.8 sysload=0.28 cputime=81.625 memavail=639800 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.523
Stats 1958.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16264 bytes_read=51098 bytes_retransmit=0 bytes_invalid=0 send_seq=1175 receive_seq=1175 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.28 cputime=81.662 memavail=639548 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.673
Stats 1959.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16330 bytes_read=51302 bytes_retransmit=0 bytes_invalid=0 send_seq=1180 receive_seq=1180 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.25 cputime=81.697 memavail=639324 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.764
Stats 1960.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16396 bytes_read=51536 bytes_retransmit=0 bytes_invalid=0 send_seq=1185 receive_seq=1185 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.4 sysload=0.25 cputime=81.732 memavail=639324 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.598
Stats 1961.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16478 bytes_read=51773 bytes_retransmit=0 bytes_invalid=0 send_seq=1191 receive_seq=1191 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.25 cputime=81.757 memavail=638828 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.675
Stats 1962.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16544 bytes_read=51977 bytes_retransmit=0 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.4 sysload=0.25 cputime=81.790 memavail=638100 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.740
Stats 1963.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16621 bytes_read=52211 bytes_retransmit=0 bytes_invalid=0 send_seq=1201 receive_seq=1201 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.25 cputime=81.825 memavail=637876 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.750
Stats 1964.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16698 bytes_read=52429 bytes_retransmit=0 bytes_invalid=0 send_seq=1206 receive_seq=1206 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.23 cputime=81.861 memavail=637428 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.494
Stats 1965.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16748 bytes_read=52628 bytes_retransmit=0 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.3 sysload=0.23 cputime=81.895 memavail=637204 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.678
Stats 1966.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16809 bytes_read=52871 bytes_retransmit=0 bytes_invalid=0 send_seq=1214 receive_seq=1214 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.23 cputime=81.921 memavail=641464 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.492
Stats 1967.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16886 bytes_read=53089 bytes_retransmit=0 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.23 cputime=81.954 memavail=640804 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.542
Stats 1968.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16968 bytes_read=53298 bytes_retransmit=0 bytes_invalid=0 send_seq=1225 receive_seq=1225 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.23 cputime=81.982 memavail=633384 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.420
Stats 1969.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17045 bytes_read=53532 bytes_retransmit=0 bytes_invalid=0 send_seq=1230 receive_seq=1230 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.21 cputime=82.016 memavail=633160 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.788
Stats 1970.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=17127 bytes_read=53755 bytes_retransmit=0 bytes_invalid=0 send_seq=1236 receive_seq=1236 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.21 cputime=82.052 memavail=632936 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.621
Stats 1971.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17188 bytes_read=53968 bytes_retransmit=0 bytes_invalid=0 send_seq=1240 receive_seq=1240 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.21 cputime=82.077 memavail=640844 print_time=135.839 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.673
Stats 1972.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17571 bytes_read=54227 bytes_retransmit=0 bytes_invalid=0 send_seq=1250 receive_seq=1250 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=32 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.21 cputime=82.144 memavail=639624 print_time=248.962 buffer_time=16.835 print_stall=0 extruder: target=210 temp=210.0 pwm=0.576
Stats 1973.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17685 bytes_read=54450 bytes_retransmit=0 bytes_invalid=0 send_seq=1256 receive_seq=1256 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.21 cputime=82.181 memavail=639400 print_time=248.962 buffer_time=15.834 print_stall=0 extruder: target=210 temp=210.0 pwm=0.604
Stats 1974.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17767 bytes_read=54659 bytes_retransmit=0 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.20 cputime=82.218 memavail=638952 print_time=248.962 buffer_time=14.831 print_stall=0 extruder: target=210 temp=210.2 pwm=0.507
Stats 1975.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17844 bytes_read=54893 bytes_retransmit=0 bytes_invalid=0 send_seq=1267 receive_seq=1267 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.2 heater_bed: target=0 temp=23.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.20 cputime=82.256 memavail=638504 print_time=248.962 buffer_time=13.828 print_stall=0 extruder: target=210 temp=210.0 pwm=0.679
Stats 1976.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=17910 bytes_read=55126 bytes_retransmit=0 bytes_invalid=0 send_seq=1272 receive_seq=1272 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=82.282 memavail=640980 print_time=248.962 buffer_time=12.826 print_stall=0 extruder: target=210 temp=209.9 pwm=0.678
Stats 1977.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=17960 bytes_read=55325 bytes_retransmit=0 bytes_invalid=0 send_seq=1276 receive_seq=1276 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.0 sysload=0.20 cputime=82.311 memavail=640088 print_time=248.962 buffer_time=11.825 print_stall=0 extruder: target=210 temp=209.7 pwm=0.759
Stats 1978.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=18037 bytes_read=55551 bytes_retransmit=0 bytes_invalid=0 send_seq=1281 receive_seq=1281 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.20 cputime=82.348 memavail=639640 print_time=248.962 buffer_time=10.825 print_stall=0 extruder: target=210 temp=209.2 pwm=0.943
Stats 1979.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=18119 bytes_read=55763 bytes_retransmit=0 bytes_invalid=0 send_seq=1287 receive_seq=1287 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.18 cputime=82.384 memavail=638968 print_time=248.962 buffer_time=9.824 print_stall=0 extruder: target=210 temp=209.2 pwm=0.781
Stats 1980.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=18185 bytes_read=55957 bytes_retransmit=0 bytes_invalid=0 send_seq=1292 receive_seq=1292 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.5 sysload=0.18 cputime=82.422 memavail=640800 print_time=248.962 buffer_time=8.823 print_stall=0 extruder: target=210 temp=208.6 pwm=1.000
Stats 1981.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18251 bytes_read=56193 bytes_retransmit=0 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.18 cputime=82.450 memavail=639016 print_time=248.962 buffer_time=7.822 print_stall=0 extruder: target=210 temp=208.7 pwm=0.757
Stats 1982.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18333 bytes_read=56416 bytes_retransmit=0 bytes_invalid=0 send_seq=1303 receive_seq=1303 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=31.5 sysload=0.18 cputime=82.484 memavail=641068 print_time=248.962 buffer_time=6.822 print_stall=0 extruder: target=210 temp=208.6 pwm=0.759
Stats 1983.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18399 bytes_read=56620 bytes_retransmit=0 bytes_invalid=0 send_seq=1308 receive_seq=1308 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=30.6 sysload=0.18 cputime=82.518 memavail=640116 print_time=248.962 buffer_time=5.821 print_stall=0 extruder: target=210 temp=208.5 pwm=0.828
Stats 1984.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18465 bytes_read=56868 bytes_retransmit=0 bytes_invalid=0 send_seq=1313 receive_seq=1313 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.9 sysload=0.17 cputime=82.559 memavail=639668 print_time=248.962 buffer_time=4.820 print_stall=0 extruder: target=210 temp=208.7 pwm=0.593
Stats 1985.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18558 bytes_read=57077 bytes_retransmit=0 bytes_invalid=0 send_seq=1319 receive_seq=1319 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.17 cputime=82.595 memavail=641424 print_time=248.962 buffer_time=3.819 print_stall=0 extruder: target=210 temp=208.5 pwm=0.749
Stats 1986.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18640 bytes_read=57300 bytes_retransmit=0 bytes_invalid=0 send_seq=1325 receive_seq=1325 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.17 cputime=82.622 memavail=641072 print_time=248.962 buffer_time=2.819 print_stall=0 extruder: target=210 temp=208.7 pwm=0.664
Stats 1987.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18722 bytes_read=57553 bytes_retransmit=0 bytes_invalid=0 send_seq=1331 receive_seq=1331 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=31.3 sysload=0.17 cputime=82.657 memavail=640596 print_time=248.962 buffer_time=1.818 print_stall=0 extruder: target=210 temp=208.7 pwm=0.678
Stats 1988.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18804 bytes_read=57762 bytes_retransmit=0 bytes_invalid=0 send_seq=1337 receive_seq=1337 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=30.3 sysload=0.17 cputime=82.689 memavail=640092 print_time=248.962 buffer_time=0.817 print_stall=0 extruder: target=210 temp=208.5 pwm=0.852
Stats 1989.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18922 bytes_read=57976 bytes_retransmit=0 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.8 sysload=0.15 cputime=82.724 memavail=640516 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.8 pwm=0.733
Stats 1990.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18988 bytes_read=58224 bytes_retransmit=0 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.9 sysload=0.15 cputime=82.761 memavail=641344 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.8 pwm=0.787
Stats 1991.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19086 bytes_read=58452 bytes_retransmit=0 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.5 sysload=0.15 cputime=82.787 memavail=639488 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.1 pwm=0.686
Stats 1992.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19152 bytes_read=58656 bytes_retransmit=0 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.15 cputime=82.821 memavail=639012 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.569
Stats 1993.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19202 bytes_read=58899 bytes_retransmit=0 bytes_invalid=0 send_seq=1365 receive_seq=1365 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.9 sysload=0.15 cputime=82.856 memavail=640764 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.490
Stats 1994.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19284 bytes_read=59108 bytes_retransmit=0 bytes_invalid=0 send_seq=1371 receive_seq=1371 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.0 sysload=0.14 cputime=82.891 memavail=640072 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.690
Stats 1995.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19350 bytes_read=59312 bytes_retransmit=0 bytes_invalid=0 send_seq=1376 receive_seq=1376 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.4 sysload=0.14 cputime=82.924 memavail=640072 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.647
Stats 1996.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19416 bytes_read=59574 bytes_retransmit=0 bytes_invalid=0 send_seq=1381 receive_seq=1381 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.14 cputime=82.951 memavail=641464 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.449
Stats 1997.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19514 bytes_read=59788 bytes_retransmit=0 bytes_invalid=0 send_seq=1388 receive_seq=1388 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.14 cputime=82.986 memavail=641076 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.554
Stats 1998.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19596 bytes_read=59997 bytes_retransmit=0 bytes_invalid=0 send_seq=1394 receive_seq=1394 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.14 cputime=83.019 memavail=640824 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.447
Stats 1999.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19673 bytes_read=60245 bytes_retransmit=0 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.13 cputime=83.053 memavail=640320 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.485
Stats 2000.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19755 bytes_read=60454 bytes_retransmit=0 bytes_invalid=0 send_seq=1405 receive_seq=1405 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=83.087 memavail=640332 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.565
Stats 2001.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19805 bytes_read=60667 bytes_retransmit=0 bytes_invalid=0 send_seq=1409 receive_seq=1409 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.13 cputime=83.111 memavail=639140 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.620
Stats 2002.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19887 bytes_read=60920 bytes_retransmit=0 bytes_invalid=0 send_seq=1415 receive_seq=1415 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.13 cputime=83.146 memavail=641140 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.641
Stats 2003.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19985 bytes_read=61134 bytes_retransmit=0 bytes_invalid=0 send_seq=1422 receive_seq=1422 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.8 sysload=0.13 cputime=83.178 memavail=640888 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.569
Stats 2004.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20051 bytes_read=61338 bytes_retransmit=0 bytes_invalid=0 send_seq=1427 receive_seq=1427 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.12 cputime=83.210 memavail=639916 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.583
Stats 2005.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20118 bytes_read=61597 bytes_retransmit=0 bytes_invalid=0 send_seq=1432 receive_seq=1432 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.9 sysload=0.12 cputime=83.245 memavail=640452 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.520
Stats 2006.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20184 bytes_read=61815 bytes_retransmit=0 bytes_invalid=0 send_seq=1437 receive_seq=1437 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.12 cputime=83.269 memavail=641064 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.505
Stats 2007.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20250 bytes_read=62019 bytes_retransmit=0 bytes_invalid=0 send_seq=1442 receive_seq=1442 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.12 cputime=83.300 memavail=640588 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.648
Stats 2008.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20300 bytes_read=62262 bytes_retransmit=0 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.12 cputime=83.333 memavail=640140 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.671
Stats 2009.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20361 bytes_read=62461 bytes_retransmit=0 bytes_invalid=0 send_seq=1450 receive_seq=1450 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.11 cputime=83.364 memavail=639916 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.446
Stats 2010.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20427 bytes_read=62680 bytes_retransmit=0 bytes_invalid=0 send_seq=1455 receive_seq=1455 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=83.396 memavail=639916 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.721
Stats 2011.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20509 bytes_read=62932 bytes_retransmit=0 bytes_invalid=0 send_seq=1461 receive_seq=1461 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.8 sysload=0.11 cputime=83.421 memavail=639028 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.738
Stats 2012.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20607 bytes_read=63146 bytes_retransmit=0 bytes_invalid=0 send_seq=1468 receive_seq=1468 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.11 cputime=83.455 memavail=638336 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.606
Stats 2013.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20673 bytes_read=63365 bytes_retransmit=0 bytes_invalid=0 send_seq=1473 receive_seq=1473 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.11 cputime=83.488 memavail=637888 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.617
Stats 2014.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20739 bytes_read=63598 bytes_retransmit=0 bytes_invalid=0 send_seq=1478 receive_seq=1478 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.10 cputime=83.520 memavail=637640 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.650
Stats 2015.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20805 bytes_read=63802 bytes_retransmit=0 bytes_invalid=0 send_seq=1483 receive_seq=1483 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.10 cputime=83.552 memavail=637416 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.675
Stats 2016.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20855 bytes_read=64030 bytes_retransmit=0 bytes_invalid=0 send_seq=1487 receive_seq=1487 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.10 cputime=83.576 memavail=641460 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.575
Stats 2017.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20921 bytes_read=64263 bytes_retransmit=0 bytes_invalid=0 send_seq=1492 receive_seq=1492 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.10 cputime=83.607 memavail=641208 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.612
Stats 2018.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=20971 bytes_read=64462 bytes_retransmit=0 bytes_invalid=0 send_seq=1496 receive_seq=1496 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.6 sysload=0.10 cputime=83.637 memavail=640760 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.493
Stats 2019.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21053 bytes_read=64686 bytes_retransmit=0 bytes_invalid=0 send_seq=1502 receive_seq=1502 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=27.6 sysload=0.09 cputime=83.669 memavail=640060 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.554
Stats 2020.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21103 bytes_read=64914 bytes_retransmit=0 bytes_invalid=0 send_seq=1506 receive_seq=1506 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.5 sysload=0.09 cputime=83.705 memavail=641844 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.567
Stats 2021.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21185 bytes_read=65137 bytes_retransmit=0 bytes_invalid=0 send_seq=1512 receive_seq=1512 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.09 cputime=83.730 memavail=639580 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.680
Stats 2022.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21251 bytes_read=65356 bytes_retransmit=0 bytes_invalid=0 send_seq=1517 receive_seq=1517 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.09 cputime=83.765 memavail=639124 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.527
Stats 2023.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21328 bytes_read=65589 bytes_retransmit=0 bytes_invalid=0 send_seq=1522 receive_seq=1522 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=83.800 memavail=641528 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.562
Stats 2024.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21410 bytes_read=65798 bytes_retransmit=0 bytes_invalid=0 send_seq=1528 receive_seq=1528 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.9 sysload=0.08 cputime=83.834 memavail=641052 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.591
Stats 2025.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21471 bytes_read=66012 bytes_retransmit=0 bytes_invalid=0 send_seq=1532 receive_seq=1532 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.0 sysload=0.08 cputime=83.866 memavail=640576 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.543
Stats 2026.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=21521 bytes_read=66254 bytes_retransmit=0 bytes_invalid=0 send_seq=1536 receive_seq=1536 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.7 sysload=0.08 cputime=83.891 memavail=641636 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.543
Stats 2027.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=21619 bytes_read=66468 bytes_retransmit=0 bytes_invalid=0 send_seq=1543 receive_seq=1543 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.9 sysload=0.08 cputime=83.925 memavail=641384 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.553
Stats 2028.8: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=21685 bytes_read=66687 bytes_retransmit=0 bytes_invalid=0 send_seq=1548 receive_seq=1548 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.08 cputime=83.958 memavail=641236 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.603
Stats 2029.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=21719 bytes_read=66910 bytes_retransmit=0 bytes_invalid=0 send_seq=1551 receive_seq=1551 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.7 sysload=0.08 cputime=83.991 memavail=640988 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.603
Stats 2030.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=21780 bytes_read=67109 bytes_retransmit=0 bytes_invalid=0 send_seq=1555 receive_seq=1555 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.08 cputime=84.024 memavail=640736 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.572
Stats 2031.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21830 bytes_read=67337 bytes_retransmit=0 bytes_invalid=0 send_seq=1559 receive_seq=1559 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.08 cputime=84.049 memavail=641356 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.764
Stats 2032.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21896 bytes_read=67570 bytes_retransmit=0 bytes_invalid=0 send_seq=1564 receive_seq=1564 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.08 cputime=84.085 memavail=640944 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.657
Stats 2033.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21930 bytes_read=67764 bytes_retransmit=0 bytes_invalid=0 send_seq=1567 receive_seq=1567 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.9 sysload=0.08 cputime=84.116 memavail=640496 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.657
Stats 2034.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=21991 bytes_read=67978 bytes_retransmit=0 bytes_invalid=0 send_seq=1571 receive_seq=1571 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.07 cputime=84.150 memavail=640272 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.632
Stats 2035.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22073 bytes_read=68216 bytes_retransmit=0 bytes_invalid=0 send_seq=1577 receive_seq=1577 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.4 sysload=0.07 cputime=84.186 memavail=639796 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.610
Stats 2036.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22139 bytes_read=68434 bytes_retransmit=0 bytes_invalid=0 send_seq=1582 receive_seq=1582 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.07 cputime=84.210 memavail=641068 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.595
Stats 2037.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22195 bytes_read=68642 bytes_retransmit=0 bytes_invalid=0 send_seq=1585 receive_seq=1585 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.07 cputime=84.243 memavail=640368 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.415
Stats 2038.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22261 bytes_read=68863 bytes_retransmit=0 bytes_invalid=0 send_seq=1590 receive_seq=1590 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.07 cputime=84.276 memavail=640832 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.624
Stats 2039.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22327 bytes_read=69057 bytes_retransmit=0 bytes_invalid=0 send_seq=1595 receive_seq=1595 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.06 cputime=84.307 memavail=640580 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.530
Stats 2040.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22377 bytes_read=69260 bytes_retransmit=0 bytes_invalid=0 send_seq=1599 receive_seq=1599 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=30.8 sysload=0.06 cputime=84.339 memavail=640572 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.627
Stats 2041.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22459 bytes_read=69505 bytes_retransmit=0 bytes_invalid=0 send_seq=1605 receive_seq=1605 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.0 pwm=0.000 mcu_temp: temp=27.9 sysload=0.06 cputime=84.365 memavail=638824 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.605
Stats 2042.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22525 bytes_read=69709 bytes_retransmit=0 bytes_invalid=0 send_seq=1610 receive_seq=1610 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.06 cputime=84.399 memavail=638404 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.594
Stats 2043.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22586 bytes_read=69923 bytes_retransmit=0 bytes_invalid=0 send_seq=1614 receive_seq=1614 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.8 sysload=0.06 cputime=84.433 memavail=638180 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.606
Stats 2044.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22663 bytes_read=70156 bytes_retransmit=0 bytes_invalid=0 send_seq=1619 receive_seq=1619 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.0 sysload=0.06 cputime=84.467 memavail=637960 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.680
Stats 2045.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=22745 bytes_read=70365 bytes_retransmit=0 bytes_invalid=0 send_seq=1625 receive_seq=1625 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.1 sysload=0.06 cputime=84.507 memavail=637736 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.582
Stats 2046.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=22822 bytes_read=70598 bytes_retransmit=0 bytes_invalid=0 send_seq=1630 receive_seq=1630 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.06 cputime=84.534 memavail=641388 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.647
Stats 2047.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=22904 bytes_read=70836 bytes_retransmit=0 bytes_invalid=0 send_seq=1636 receive_seq=1636 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.06 cputime=84.570 memavail=641596 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.698
Stats 2048.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=22986 bytes_read=71045 bytes_retransmit=0 bytes_invalid=0 send_seq=1642 receive_seq=1642 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.06 cputime=84.601 memavail=641344 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.678
Stats 2049.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=23063 bytes_read=71264 bytes_retransmit=0 bytes_invalid=0 send_seq=1647 receive_seq=1647 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.05 cputime=84.635 memavail=640976 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.499
Stats 2050.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=23145 bytes_read=71502 bytes_retransmit=0 bytes_invalid=0 send_seq=1653 receive_seq=1653 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.05 cputime=84.672 memavail=641648 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.686
Stats 2051.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23238 bytes_read=71725 bytes_retransmit=0 bytes_invalid=0 send_seq=1659 receive_seq=1659 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.05 cputime=84.697 memavail=639140 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.580
Stats 2052.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23315 bytes_read=71944 bytes_retransmit=0 bytes_invalid=0 send_seq=1664 receive_seq=1664 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.05 cputime=84.732 memavail=641092 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.600
Stats 2053.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23397 bytes_read=72177 bytes_retransmit=0 bytes_invalid=0 send_seq=1670 receive_seq=1669 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=32.0 sysload=0.05 cputime=84.765 memavail=640840 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.620
Stats 2054.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23447 bytes_read=72381 bytes_retransmit=0 bytes_invalid=0 send_seq=1674 receive_seq=1674 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.4 sysload=0.05 cputime=84.800 memavail=640392 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.723
Stats 2055.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23508 bytes_read=72595 bytes_retransmit=0 bytes_invalid=0 send_seq=1678 receive_seq=1678 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.05 cputime=84.833 memavail=642292 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.702
Stats 2056.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23606 bytes_read=72847 bytes_retransmit=0 bytes_invalid=0 send_seq=1685 receive_seq=1684 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.2 sysload=0.05 cputime=84.863 memavail=641564 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.679
Stats 2057.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23688 bytes_read=73061 bytes_retransmit=0 bytes_invalid=0 send_seq=1691 receive_seq=1691 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.8 sysload=0.05 cputime=84.899 memavail=640864 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.600
Stats 2058.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23754 bytes_read=73280 bytes_retransmit=0 bytes_invalid=0 send_seq=1696 receive_seq=1696 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.2 sysload=0.05 cputime=84.934 memavail=641344 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.666
Stats 2059.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23820 bytes_read=73513 bytes_retransmit=0 bytes_invalid=0 send_seq=1701 receive_seq=1701 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.05 cputime=84.970 memavail=640868 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.548
Stats 2060.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23854 bytes_read=73707 bytes_retransmit=0 bytes_invalid=0 send_seq=1704 receive_seq=1704 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.6 sysload=0.05 cputime=85.004 memavail=640420 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.548
Stats 2061.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23915 bytes_read=73935 bytes_retransmit=0 bytes_invalid=0 send_seq=1708 receive_seq=1708 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.8 sysload=0.05 cputime=85.029 memavail=641348 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.497
Stats 2062.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=23976 bytes_read=74163 bytes_retransmit=0 bytes_invalid=0 send_seq=1712 receive_seq=1712 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.05 cputime=85.065 memavail=640816 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.541
Stats 2063.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24042 bytes_read=74367 bytes_retransmit=0 bytes_invalid=0 send_seq=1717 receive_seq=1717 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.05 cputime=85.096 memavail=640116 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.572
Stats 2064.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24103 bytes_read=74581 bytes_retransmit=0 bytes_invalid=0 send_seq=1721 receive_seq=1721 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=33.4 sysload=0.04 cputime=85.129 memavail=639668 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.724
Stats 2065.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24169 bytes_read=74814 bytes_retransmit=0 bytes_invalid=0 send_seq=1726 receive_seq=1726 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.8 sysload=0.04 cputime=85.161 memavail=641536 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.836
Stats 2066.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24257 bytes_read=75037 bytes_retransmit=0 bytes_invalid=0 send_seq=1733 receive_seq=1732 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.6 sysload=0.04 cputime=85.186 memavail=640724 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.545
Stats 2067.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24318 bytes_read=75267 bytes_retransmit=0 bytes_invalid=0 send_seq=1737 receive_seq=1737 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.2 sysload=0.04 cputime=85.222 memavail=641084 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.524
Stats 2068.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24411 bytes_read=75505 bytes_retransmit=0 bytes_invalid=0 send_seq=1743 receive_seq=1743 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.04 cputime=85.261 memavail=640140 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.747
Stats 2069.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=24477 bytes_read=75709 bytes_retransmit=0 bytes_invalid=0 send_seq=1748 receive_seq=1748 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.04 cputime=85.298 memavail=639720 print_time=248.962 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.562
Stats 2070.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=25096 bytes_read=75983 bytes_retransmit=0 bytes_invalid=0 send_seq=1761 receive_seq=1761 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=312 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.04 cputime=85.379 memavail=642160 print_time=379.580 buffer_time=49.378 print_stall=0 extruder: target=210 temp=210.2 pwm=0.489
Stats 2071.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=25210 bytes_read=76226 bytes_retransmit=0 bytes_invalid=0 send_seq=1768 receive_seq=1768 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=296 freq=72002716  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.2 sysload=0.04 cputime=85.405 memavail=641104 print_time=379.580 buffer_time=48.377 print_stall=0 extruder: target=210 temp=209.8 pwm=0.737
Stats 2072.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=25308 bytes_read=76435 bytes_retransmit=0 bytes_invalid=0 send_seq=1774 receive_seq=1774 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=280 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.04 cputime=85.438 memavail=640152 print_time=379.580 buffer_time=47.377 print_stall=0 extruder: target=210 temp=210.1 pwm=0.558
Stats 2073.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=25374 bytes_read=76664 bytes_retransmit=0 bytes_invalid=0 send_seq=1778 receive_seq=1778 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=264 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.4 sysload=0.04 cputime=85.472 memavail=639704 print_time=379.580 buffer_time=46.376 print_stall=0 extruder: target=210 temp=210.0 pwm=0.630
Stats 2074.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=25456 bytes_read=76882 bytes_retransmit=0 bytes_invalid=0 send_seq=1783 receive_seq=1783 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=248 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.04 cputime=85.506 memavail=639480 print_time=379.580 buffer_time=45.376 print_stall=0 extruder: target=210 temp=210.0 pwm=0.622
Stats 2075.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=25538 bytes_read=77086 bytes_retransmit=0 bytes_invalid=0 send_seq=1788 receive_seq=1788 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=232 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.0 sysload=0.04 cputime=85.541 memavail=638780 print_time=379.580 buffer_time=44.375 print_stall=0 extruder: target=210 temp=209.9 pwm=0.663
Stats 2076.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=25615 bytes_read=77329 bytes_retransmit=0 bytes_invalid=0 send_seq=1792 receive_seq=1792 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=216 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.04 cputime=85.569 memavail=641268 print_time=379.580 buffer_time=43.374 print_stall=0 extruder: target=210 temp=209.9 pwm=0.625
Stats 2077.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=25713 bytes_read=77552 bytes_retransmit=0 bytes_invalid=0 send_seq=1798 receive_seq=1798 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=200 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.6 sysload=0.04 cputime=85.604 memavail=640092 print_time=379.580 buffer_time=42.373 print_stall=0 extruder: target=210 temp=209.7 pwm=0.763
Stats 2078.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=25779 bytes_read=77751 bytes_retransmit=0 bytes_invalid=0 send_seq=1802 receive_seq=1802 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=184 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.7 sysload=0.04 cputime=85.639 memavail=639420 print_time=379.580 buffer_time=41.371 print_stall=0 extruder: target=210 temp=209.8 pwm=0.636
Stats 2079.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=25856 bytes_read=77980 bytes_retransmit=0 bytes_invalid=0 send_seq=1806 receive_seq=1806 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=168 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.03 cputime=85.674 memavail=639196 print_time=379.580 buffer_time=40.370 print_stall=0 extruder: target=210 temp=209.7 pwm=0.650
Stats 2080.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=25954 bytes_read=78203 bytes_retransmit=0 bytes_invalid=0 send_seq=1812 receive_seq=1812 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=152 freq=72002707  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.03 cputime=85.708 memavail=641664 print_time=379.580 buffer_time=39.369 print_stall=0 extruder: target=210 temp=209.5 pwm=0.783
Stats 2081.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26052 bytes_read=78426 bytes_retransmit=0 bytes_invalid=0 send_seq=1818 receive_seq=1818 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=136 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.03 cputime=85.733 memavail=639080 print_time=379.580 buffer_time=38.368 print_stall=0 extruder: target=210 temp=209.5 pwm=0.747
Stats 2082.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26113 bytes_read=78650 bytes_retransmit=0 bytes_invalid=0 send_seq=1821 receive_seq=1821 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=120 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.03 cputime=85.769 memavail=638380 print_time=379.580 buffer_time=37.367 print_stall=0 extruder: target=210 temp=209.6 pwm=0.642
Stats 2083.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26179 bytes_read=78863 bytes_retransmit=0 bytes_invalid=0 send_seq=1825 receive_seq=1825 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=104 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.03 cputime=85.805 memavail=640708 print_time=379.580 buffer_time=36.366 print_stall=0 extruder: target=210 temp=209.4 pwm=0.752
Stats 2084.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26277 bytes_read=79072 bytes_retransmit=0 bytes_invalid=0 send_seq=1831 receive_seq=1831 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=88 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.27 cputime=85.842 memavail=639760 print_time=379.580 buffer_time=35.365 print_stall=0 extruder: target=210 temp=209.3 pwm=0.812
Stats 2085.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26343 bytes_read=79301 bytes_retransmit=0 bytes_invalid=0 send_seq=1835 receive_seq=1835 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=72 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.27 cputime=85.879 memavail=639536 print_time=379.580 buffer_time=34.365 print_stall=0 extruder: target=210 temp=209.4 pwm=0.663
Stats 2086.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26441 bytes_read=79538 bytes_retransmit=0 bytes_invalid=0 send_seq=1841 receive_seq=1841 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=56 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.7 sysload=0.27 cputime=85.906 memavail=641056 print_time=379.580 buffer_time=33.360 print_stall=0 extruder: target=210 temp=209.5 pwm=0.680
Stats 2087.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26491 bytes_read=79732 bytes_retransmit=0 bytes_invalid=0 send_seq=1844 receive_seq=1844 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=40 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.27 cputime=85.939 memavail=640384 print_time=379.580 buffer_time=32.360 print_stall=0 extruder: target=210 temp=209.6 pwm=0.680
Stats 2088.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26568 bytes_read=79961 bytes_retransmit=0 bytes_invalid=0 send_seq=1848 receive_seq=1848 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=24 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.27 cputime=85.975 memavail=632900 print_time=379.580 buffer_time=31.358 print_stall=0 extruder: target=210 temp=209.7 pwm=0.542
Stats 2089.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26661 bytes_read=80179 bytes_retransmit=0 bytes_invalid=0 send_seq=1853 receive_seq=1853 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=72002716  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.33 cputime=86.007 memavail=637732 print_time=379.580 buffer_time=30.358 print_stall=0 extruder: target=210 temp=209.6 pwm=0.626
Stats 2090.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26751 bytes_read=80388 bytes_retransmit=0 bytes_invalid=0 send_seq=1859 receive_seq=1859 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.2 sysload=0.33 cputime=86.046 memavail=637508 print_time=379.580 buffer_time=29.357 print_stall=0 extruder: target=210 temp=209.6 pwm=0.683
Stats 2091.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26828 bytes_read=80636 bytes_retransmit=0 bytes_invalid=0 send_seq=1864 receive_seq=1864 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.33 cputime=86.085 memavail=639168 print_time=379.580 buffer_time=28.356 print_stall=0 extruder: target=210 temp=209.7 pwm=0.598
Stats 2092.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26894 bytes_read=80854 bytes_retransmit=0 bytes_invalid=0 send_seq=1869 receive_seq=1869 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.33 cputime=86.120 memavail=640916 print_time=379.580 buffer_time=27.355 print_stall=0 extruder: target=210 temp=209.5 pwm=0.677
Stats 2093.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=26971 bytes_read=81058 bytes_retransmit=0 bytes_invalid=0 send_seq=1874 receive_seq=1874 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.9 sysload=0.33 cputime=86.153 memavail=640076 print_time=379.580 buffer_time=26.354 print_stall=0 extruder: target=210 temp=209.4 pwm=0.839
Stats 2094.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=27037 bytes_read=81292 bytes_retransmit=0 bytes_invalid=0 send_seq=1879 receive_seq=1879 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.38 cputime=86.187 memavail=639068 print_time=379.580 buffer_time=25.353 print_stall=0 extruder: target=210 temp=209.7 pwm=0.696
Stats 2095.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=27103 bytes_read=81510 bytes_retransmit=0 bytes_invalid=0 send_seq=1884 receive_seq=1884 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=30.7 sysload=0.38 cputime=86.220 memavail=638088 print_time=379.580 buffer_time=24.352 print_stall=0 extruder: target=210 temp=209.4 pwm=0.852
Stats 2096.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27180 bytes_read=81728 bytes_retransmit=0 bytes_invalid=0 send_seq=1889 receive_seq=1889 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.38 cputime=86.245 memavail=640568 print_time=379.580 buffer_time=23.351 print_stall=0 extruder: target=210 temp=209.7 pwm=0.653
Stats 2097.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27246 bytes_read=81957 bytes_retransmit=0 bytes_invalid=0 send_seq=1894 receive_seq=1894 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.8 sysload=0.38 cputime=86.281 memavail=639868 print_time=379.580 buffer_time=22.350 print_stall=0 extruder: target=210 temp=209.7 pwm=0.687
Stats 2098.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27280 bytes_read=82154 bytes_retransmit=0 bytes_invalid=0 send_seq=1897 receive_seq=1897 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.38 cputime=86.314 memavail=638860 print_time=379.580 buffer_time=21.349 print_stall=0 extruder: target=210 temp=209.8 pwm=0.687
Stats 2099.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27362 bytes_read=82353 bytes_retransmit=0 bytes_invalid=0 send_seq=1903 receive_seq=1903 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.51 cputime=86.347 memavail=638188 print_time=379.580 buffer_time=20.348 print_stall=0 extruder: target=210 temp=210.0 pwm=0.490
Stats 2100.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27439 bytes_read=82575 bytes_retransmit=0 bytes_invalid=0 send_seq=1908 receive_seq=1908 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.8 sysload=0.51 cputime=86.382 memavail=640988 print_time=379.580 buffer_time=19.347 print_stall=0 extruder: target=210 temp=209.8 pwm=0.686
Stats 2101.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=27505 bytes_read=82805 bytes_retransmit=0 bytes_invalid=0 send_seq=1913 receive_seq=1913 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.51 cputime=86.415 memavail=639148 print_time=379.580 buffer_time=18.347 print_stall=0 extruder: target=210 temp=209.9 pwm=0.630
Stats 2102.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=27571 bytes_read=83009 bytes_retransmit=0 bytes_invalid=0 send_seq=1918 receive_seq=1918 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.9 sysload=0.51 cputime=86.458 memavail=638456 print_time=379.580 buffer_time=17.346 print_stall=0 extruder: target=210 temp=209.8 pwm=0.676
Stats 2103.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=27653 bytes_read=83248 bytes_retransmit=0 bytes_invalid=0 send_seq=1924 receive_seq=1924 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.51 cputime=86.502 memavail=639192 print_time=379.580 buffer_time=16.345 print_stall=0 extruder: target=210 temp=209.7 pwm=0.748
Stats 2104.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=27751 bytes_read=83476 bytes_retransmit=0 bytes_invalid=0 send_seq=1931 receive_seq=1931 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=32.0 sysload=0.55 cputime=86.539 memavail=638760 print_time=379.580 buffer_time=15.344 print_stall=0 extruder: target=210 temp=209.9 pwm=0.633
Stats 2105.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=27785 bytes_read=83670 bytes_retransmit=0 bytes_invalid=0 send_seq=1934 receive_seq=1934 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.4 sysload=0.55 cputime=86.572 memavail=638284 print_time=379.580 buffer_time=14.343 print_stall=0 extruder: target=210 temp=209.9 pwm=0.633
Stats 2106.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27835 bytes_read=83913 bytes_retransmit=0 bytes_invalid=0 send_seq=1938 receive_seq=1938 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.55 cputime=86.597 memavail=639544 print_time=379.580 buffer_time=13.342 print_stall=0 extruder: target=210 temp=210.1 pwm=0.563
Stats 2107.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27912 bytes_read=84131 bytes_retransmit=0 bytes_invalid=0 send_seq=1943 receive_seq=1943 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.55 cputime=86.631 memavail=637820 print_time=379.580 buffer_time=12.341 print_stall=0 extruder: target=210 temp=209.8 pwm=0.714
Stats 2108.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=27994 bytes_read=84340 bytes_retransmit=0 bytes_invalid=0 send_seq=1949 receive_seq=1949 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.55 cputime=86.663 memavail=640516 print_time=379.580 buffer_time=11.340 print_stall=0 extruder: target=210 temp=209.8 pwm=0.697
Stats 2109.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28076 bytes_read=84593 bytes_retransmit=0 bytes_invalid=0 send_seq=1955 receive_seq=1955 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.67 cputime=86.699 memavail=639588 print_time=379.580 buffer_time=10.339 print_stall=0 extruder: target=210 temp=210.0 pwm=0.587
Stats 2110.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28142 bytes_read=84797 bytes_retransmit=0 bytes_invalid=0 send_seq=1960 receive_seq=1960 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.67 cputime=86.733 memavail=641108 print_time=379.580 buffer_time=9.338 print_stall=0 extruder: target=210 temp=209.9 pwm=0.749
Stats 2111.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28192 bytes_read=85010 bytes_retransmit=0 bytes_invalid=0 send_seq=1964 receive_seq=1964 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=32.6 sysload=0.67 cputime=86.756 memavail=638220 print_time=379.580 buffer_time=8.337 print_stall=0 extruder: target=210 temp=210.0 pwm=0.636
Stats 2112.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28274 bytes_read=85263 bytes_retransmit=0 bytes_invalid=0 send_seq=1970 receive_seq=1970 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.67 cputime=86.790 memavail=637772 print_time=379.580 buffer_time=7.336 print_stall=0 extruder: target=210 temp=209.7 pwm=0.789
Stats 2113.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28356 bytes_read=85472 bytes_retransmit=0 bytes_invalid=0 send_seq=1976 receive_seq=1976 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.67 cputime=86.825 memavail=637548 print_time=379.580 buffer_time=6.335 print_stall=0 extruder: target=210 temp=209.9 pwm=0.718
Stats 2114.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28390 bytes_read=85666 bytes_retransmit=0 bytes_invalid=0 send_seq=1979 receive_seq=1979 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.5 sysload=0.61 cputime=86.855 memavail=637548 print_time=379.580 buffer_time=5.335 print_stall=0 extruder: target=210 temp=209.8 pwm=0.718
Stats 2115.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28472 bytes_read=85919 bytes_retransmit=0 bytes_invalid=0 send_seq=1985 receive_seq=1985 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=31.3 sysload=0.61 cputime=86.889 memavail=642284 print_time=379.580 buffer_time=4.333 print_stall=0 extruder: target=210 temp=210.0 pwm=0.639
Stats 2116.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=28538 bytes_read=86137 bytes_retransmit=0 bytes_invalid=0 send_seq=1990 receive_seq=1990 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.4 sysload=0.61 cputime=86.914 memavail=641428 print_time=379.580 buffer_time=3.333 print_stall=0 extruder: target=210 temp=210.2 pwm=0.555
Stats 2117.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=28604 bytes_read=86341 bytes_retransmit=0 bytes_invalid=0 send_seq=1995 receive_seq=1995 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.61 cputime=86.945 memavail=641516 print_time=379.580 buffer_time=2.331 print_stall=0 extruder: target=210 temp=210.0 pwm=0.717
Stats 2118.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=28670 bytes_read=86589 bytes_retransmit=0 bytes_invalid=0 send_seq=2000 receive_seq=2000 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.4 sysload=0.61 cputime=86.982 memavail=640580 print_time=379.580 buffer_time=1.330 print_stall=0 extruder: target=210 temp=209.9 pwm=0.720
Stats 2119.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=28768 bytes_read=86803 bytes_retransmit=0 bytes_invalid=0 send_seq=2007 receive_seq=2007 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.56 cputime=87.021 memavail=640916 print_time=379.580 buffer_time=0.329 print_stall=0 extruder: target=210 temp=209.8 pwm=0.764
Stats 2120.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=28837 bytes_read=87007 bytes_retransmit=0 bytes_invalid=0 send_seq=2012 receive_seq=2012 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.56 cputime=87.058 memavail=640440 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.666
Stats 2121.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28887 bytes_read=87264 bytes_retransmit=0 bytes_invalid=0 send_seq=2016 receive_seq=2016 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=32.5 sysload=0.56 cputime=87.084 memavail=641048 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.567
Stats 2122.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=28985 bytes_read=87478 bytes_retransmit=0 bytes_invalid=0 send_seq=2023 receive_seq=2023 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=28.6 sysload=0.56 cputime=87.117 memavail=641240 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.740
Stats 2123.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=29035 bytes_read=87677 bytes_retransmit=0 bytes_invalid=0 send_seq=2027 receive_seq=2027 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.56 cputime=87.150 memavail=640824 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.592
Stats 2124.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=29069 bytes_read=87915 bytes_retransmit=0 bytes_invalid=0 send_seq=2030 receive_seq=2030 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.5 sysload=0.60 cputime=87.184 memavail=639348 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.592
Stats 2125.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=29135 bytes_read=88119 bytes_retransmit=0 bytes_invalid=0 send_seq=2035 receive_seq=2035 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.60 cputime=87.218 memavail=639128 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.599
Stats 2126.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29169 bytes_read=88327 bytes_retransmit=0 bytes_invalid=0 send_seq=2038 receive_seq=2038 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=32.3 sysload=0.60 cputime=87.242 memavail=641120 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.599
Stats 2127.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29257 bytes_read=88596 bytes_retransmit=0 bytes_invalid=0 send_seq=2045 receive_seq=2045 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.4 sysload=0.60 cputime=87.279 memavail=640168 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.518
Stats 2128.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29339 bytes_read=88805 bytes_retransmit=0 bytes_invalid=0 send_seq=2051 receive_seq=2051 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.60 cputime=87.313 memavail=639944 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.511
Stats 2129.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29405 bytes_read=89009 bytes_retransmit=0 bytes_invalid=0 send_seq=2056 receive_seq=2056 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.55 cputime=87.347 memavail=639004 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.522
Stats 2130.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29471 bytes_read=89257 bytes_retransmit=0 bytes_invalid=0 send_seq=2061 receive_seq=2061 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.7 sysload=0.55 cputime=87.383 memavail=638780 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.580
Stats 2131.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29505 bytes_read=89465 bytes_retransmit=0 bytes_invalid=0 send_seq=2064 receive_seq=2064 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.55 cputime=87.406 memavail=639456 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.580
Stats 2132.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29582 bytes_read=89669 bytes_retransmit=0 bytes_invalid=0 send_seq=2069 receive_seq=2069 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.55 cputime=87.440 memavail=638984 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.438
Stats 2133.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29664 bytes_read=89922 bytes_retransmit=0 bytes_invalid=0 send_seq=2075 receive_seq=2075 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.55 cputime=87.475 memavail=638536 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.624
Stats 2134.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29725 bytes_read=90121 bytes_retransmit=0 bytes_invalid=0 send_seq=2079 receive_seq=2079 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=25.4 sysload=0.75 cputime=87.507 memavail=637844 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.611
Stats 2135.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=29786 bytes_read=90335 bytes_retransmit=0 bytes_invalid=0 send_seq=2083 receive_seq=2083 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.75 cputime=87.541 memavail=640712 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.641
Stats 2136.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=29836 bytes_read=90577 bytes_retransmit=0 bytes_invalid=0 send_seq=2087 receive_seq=2087 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.75 cputime=87.568 memavail=640672 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.434
Stats 2137.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=29934 bytes_read=90791 bytes_retransmit=0 bytes_invalid=0 send_seq=2094 receive_seq=2094 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.2 sysload=0.75 cputime=87.601 memavail=641152 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.544
Stats 2138.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30011 bytes_read=91010 bytes_retransmit=0 bytes_invalid=0 send_seq=2099 receive_seq=2099 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.75 cputime=87.635 memavail=640452 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.768
Stats 2139.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30061 bytes_read=91238 bytes_retransmit=0 bytes_invalid=0 send_seq=2103 receive_seq=2103 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.69 cputime=87.667 memavail=640452 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.581
Stats 2140.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30127 bytes_read=91442 bytes_retransmit=0 bytes_invalid=0 send_seq=2108 receive_seq=2108 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.69 cputime=87.700 memavail=642136 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.572
Stats 2141.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=30193 bytes_read=91675 bytes_retransmit=0 bytes_invalid=0 send_seq=2113 receive_seq=2113 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.69 cputime=87.725 memavail=639188 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.551
Stats 2142.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=30259 bytes_read=91908 bytes_retransmit=0 bytes_invalid=0 send_seq=2118 receive_seq=2118 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.2 sysload=0.69 cputime=87.760 memavail=638488 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.535
Stats 2143.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=30309 bytes_read=92107 bytes_retransmit=0 bytes_invalid=0 send_seq=2122 receive_seq=2122 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.69 cputime=87.793 memavail=638488 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.535
Stats 2144.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=30386 bytes_read=92326 bytes_retransmit=0 bytes_invalid=0 send_seq=2127 receive_seq=2127 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.1 sysload=0.63 cputime=87.825 memavail=638488 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.551
Stats 2145.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=30463 bytes_read=92559 bytes_retransmit=0 bytes_invalid=0 send_seq=2132 receive_seq=2132 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.63 cputime=87.859 memavail=641596 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.504
Stats 2146.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30545 bytes_read=92782 bytes_retransmit=0 bytes_invalid=0 send_seq=2138 receive_seq=2138 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=31.3 sysload=0.63 cputime=87.881 memavail=641584 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.518
Stats 2147.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30606 bytes_read=92996 bytes_retransmit=0 bytes_invalid=0 send_seq=2142 receive_seq=2142 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.3 sysload=0.63 cputime=87.913 memavail=641080 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.518
Stats 2148.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30672 bytes_read=93229 bytes_retransmit=0 bytes_invalid=0 send_seq=2147 receive_seq=2147 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.2 sysload=0.63 cputime=87.946 memavail=640604 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.595
Stats 2149.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30770 bytes_read=93443 bytes_retransmit=0 bytes_invalid=0 send_seq=2154 receive_seq=2154 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.8 sysload=0.58 cputime=87.978 memavail=640380 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.611
Stats 2150.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30831 bytes_read=93657 bytes_retransmit=0 bytes_invalid=0 send_seq=2158 receive_seq=2158 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.58 cputime=88.013 memavail=639904 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.723
Stats 2151.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30897 bytes_read=93904 bytes_retransmit=0 bytes_invalid=0 send_seq=2163 receive_seq=2163 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.58 cputime=88.041 memavail=639320 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.708
Stats 2152.9: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=30974 bytes_read=94108 bytes_retransmit=0 bytes_invalid=0 send_seq=2168 receive_seq=2168 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.58 cputime=88.074 memavail=638872 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.684
Stats 2154.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31040 bytes_read=94327 bytes_retransmit=0 bytes_invalid=0 send_seq=2173 receive_seq=2173 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.58 cputime=88.110 memavail=640880 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.548
Stats 2155.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31106 bytes_read=94560 bytes_retransmit=0 bytes_invalid=0 send_seq=2178 receive_seq=2178 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.62 cputime=88.144 memavail=640180 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.612
Stats 2156.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31188 bytes_read=94769 bytes_retransmit=0 bytes_invalid=0 send_seq=2184 receive_seq=2184 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=30.8 sysload=0.62 cputime=88.177 memavail=642188 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.589
Stats 2157.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31249 bytes_read=94997 bytes_retransmit=0 bytes_invalid=0 send_seq=2188 receive_seq=2188 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.62 cputime=88.200 memavail=641292 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.651
Stats 2158.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31331 bytes_read=95225 bytes_retransmit=0 bytes_invalid=0 send_seq=2194 receive_seq=2194 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.62 cputime=88.233 memavail=640816 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.727
Stats 2159.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31429 bytes_read=95429 bytes_retransmit=0 bytes_invalid=0 send_seq=2201 receive_seq=2201 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.62 cputime=88.265 memavail=640816 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.715
Stats 2160.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31501 bytes_read=95632 bytes_retransmit=0 bytes_invalid=0 send_seq=2205 receive_seq=2205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.57 cputime=88.297 memavail=640816 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.471
Stats 2161.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31567 bytes_read=95856 bytes_retransmit=0 bytes_invalid=0 send_seq=2210 receive_seq=2210 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.3 sysload=0.57 cputime=88.329 memavail=641212 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.575
Stats 2162.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=31649 bytes_read=96079 bytes_retransmit=0 bytes_invalid=0 send_seq=2216 receive_seq=2216 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.57 cputime=88.355 memavail=638748 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.593
Stats 2163.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=31710 bytes_read=96293 bytes_retransmit=0 bytes_invalid=0 send_seq=2220 receive_seq=2220 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.57 cputime=88.387 memavail=638528 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.542
Stats 2164.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=31760 bytes_read=96521 bytes_retransmit=0 bytes_invalid=0 send_seq=2224 receive_seq=2224 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.9 sysload=0.57 cputime=88.423 memavail=637604 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.619
Stats 2165.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=31826 bytes_read=96725 bytes_retransmit=0 bytes_invalid=0 send_seq=2229 receive_seq=2229 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.52 cputime=88.458 memavail=637380 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.725
Stats 2166.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=31887 bytes_read=96939 bytes_retransmit=0 bytes_invalid=0 send_seq=2233 receive_seq=2233 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.52 cputime=88.492 memavail=637160 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.733
Stats 2167.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=31964 bytes_read=97186 bytes_retransmit=0 bytes_invalid=0 send_seq=2238 receive_seq=2238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.52 cputime=88.529 memavail=641448 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.567
Stats 2168.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32046 bytes_read=97395 bytes_retransmit=0 bytes_invalid=0 send_seq=2244 receive_seq=2244 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.52 cputime=88.565 memavail=641312 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.627
Stats 2169.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32123 bytes_read=97614 bytes_retransmit=0 bytes_invalid=0 send_seq=2249 receive_seq=2249 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=26.0 sysload=0.52 cputime=88.602 memavail=639812 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.554
Stats 2170.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32189 bytes_read=97847 bytes_retransmit=0 bytes_invalid=0 send_seq=2254 receive_seq=2254 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.1 sysload=0.48 cputime=88.635 memavail=639608 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.506
Stats 2171.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32266 bytes_read=98051 bytes_retransmit=0 bytes_invalid=0 send_seq=2259 receive_seq=2259 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.48 cputime=88.665 memavail=640120 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.527
Stats 2172.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32343 bytes_read=98284 bytes_retransmit=0 bytes_invalid=0 send_seq=2264 receive_seq=2264 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.48 cputime=88.690 memavail=638036 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.614
Stats 2173.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32409 bytes_read=98517 bytes_retransmit=0 bytes_invalid=0 send_seq=2269 receive_seq=2269 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.48 cputime=88.722 memavail=636820 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.658
Stats 2174.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32486 bytes_read=98721 bytes_retransmit=0 bytes_invalid=0 send_seq=2274 receive_seq=2274 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.48 cputime=88.753 memavail=640296 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.387
Stats 2175.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32547 bytes_read=98935 bytes_retransmit=0 bytes_invalid=0 send_seq=2278 receive_seq=2278 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.44 cputime=88.785 memavail=639604 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.652
Stats 2176.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=32629 bytes_read=99173 bytes_retransmit=0 bytes_invalid=0 send_seq=2284 receive_seq=2284 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.7 sysload=0.44 cputime=88.819 memavail=638624 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.692
Stats 2177.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=32695 bytes_read=99391 bytes_retransmit=0 bytes_invalid=0 send_seq=2289 receive_seq=2289 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.44 cputime=88.844 memavail=641096 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.541
Stats 2178.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=32756 bytes_read=99605 bytes_retransmit=0 bytes_invalid=0 send_seq=2293 receive_seq=2293 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.44 cputime=88.877 memavail=640620 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.625
Stats 2179.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=32822 bytes_read=99838 bytes_retransmit=0 bytes_invalid=0 send_seq=2298 receive_seq=2298 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.44 cputime=88.911 memavail=641352 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.567
Stats 2180.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=32888 bytes_read=100042 bytes_retransmit=0 bytes_invalid=0 send_seq=2303 receive_seq=2303 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=31.3 sysload=0.40 cputime=88.942 memavail=641100 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.620
Stats 2181.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=32954 bytes_read=100261 bytes_retransmit=0 bytes_invalid=0 send_seq=2308 receive_seq=2308 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.40 cputime=88.976 memavail=641924 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.699
Stats 2182.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33036 bytes_read=100513 bytes_retransmit=0 bytes_invalid=0 send_seq=2314 receive_seq=2314 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.40 cputime=89.002 memavail=639144 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.592
Stats 2183.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33118 bytes_read=100722 bytes_retransmit=0 bytes_invalid=0 send_seq=2320 receive_seq=2320 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.40 cputime=89.036 memavail=641772 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.578
Stats 2184.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33163 bytes_read=100931 bytes_retransmit=0 bytes_invalid=0 send_seq=2323 receive_seq=2323 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.40 cputime=89.069 memavail=641080 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.638
Stats 2185.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33240 bytes_read=101164 bytes_retransmit=0 bytes_invalid=0 send_seq=2328 receive_seq=2328 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.37 cputime=89.104 memavail=640604 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.787
Stats 2186.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33306 bytes_read=101368 bytes_retransmit=0 bytes_invalid=0 send_seq=2333 receive_seq=2333 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.2 sysload=0.37 cputime=89.139 memavail=640156 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.514
Stats 2187.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33383 bytes_read=101616 bytes_retransmit=0 bytes_invalid=0 send_seq=2338 receive_seq=2338 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.37 cputime=89.167 memavail=640944 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.464
Stats 2188.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33449 bytes_read=101834 bytes_retransmit=0 bytes_invalid=0 send_seq=2343 receive_seq=2343 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.1 sysload=0.37 cputime=89.203 memavail=640468 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.603
Stats 2189.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33521 bytes_read=102054 bytes_retransmit=0 bytes_invalid=0 send_seq=2349 receive_seq=2349 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.37 cputime=89.237 memavail=639768 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.584
Stats 2190.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33587 bytes_read=102288 bytes_retransmit=0 bytes_invalid=0 send_seq=2354 receive_seq=2354 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.34 cputime=89.272 memavail=639040 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.576
Stats 2191.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=33621 bytes_read=102496 bytes_retransmit=0 bytes_invalid=0 send_seq=2357 receive_seq=2357 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.1 sysload=0.34 cputime=89.304 memavail=641548 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.576
Stats 2192.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=33671 bytes_read=102709 bytes_retransmit=0 bytes_invalid=0 send_seq=2361 receive_seq=2361 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.34 cputime=89.328 memavail=639488 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.675
Stats 2193.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=33748 bytes_read=102943 bytes_retransmit=0 bytes_invalid=0 send_seq=2366 receive_seq=2366 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.34 cputime=89.364 memavail=639040 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.730
Stats 2194.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=33830 bytes_read=103166 bytes_retransmit=0 bytes_invalid=0 send_seq=2372 receive_seq=2372 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.7 sysload=0.34 cputime=89.398 memavail=638816 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.402
Stats 2195.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=33912 bytes_read=103375 bytes_retransmit=0 bytes_invalid=0 send_seq=2378 receive_seq=2378 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.31 cputime=89.432 memavail=638096 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.710
Stats 2196.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=33973 bytes_read=103604 bytes_retransmit=0 bytes_invalid=0 send_seq=2382 receive_seq=2382 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.7 sysload=0.31 cputime=89.466 memavail=637648 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.625
Stats 2197.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34039 bytes_read=103836 bytes_retransmit=0 bytes_invalid=0 send_seq=2387 receive_seq=2387 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.31 cputime=89.492 memavail=641336 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.621
Stats 2198.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34105 bytes_read=104040 bytes_retransmit=0 bytes_invalid=0 send_seq=2392 receive_seq=2392 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.31 cputime=89.530 memavail=640860 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.708
Stats 2199.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34182 bytes_read=104274 bytes_retransmit=0 bytes_invalid=0 send_seq=2397 receive_seq=2397 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.7 sysload=0.31 cputime=89.562 memavail=640412 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.637
Stats 2200.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34248 bytes_read=104492 bytes_retransmit=0 bytes_invalid=0 send_seq=2402 receive_seq=2402 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.29 cputime=89.593 memavail=641328 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.641
Stats 2201.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34314 bytes_read=104696 bytes_retransmit=0 bytes_invalid=0 send_seq=2407 receive_seq=2407 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=31.2 sysload=0.29 cputime=89.619 memavail=641736 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.695
Stats 2202.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34391 bytes_read=104944 bytes_retransmit=0 bytes_invalid=0 send_seq=2412 receive_seq=2412 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.29 cputime=89.645 memavail=639228 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.700
Stats 2203.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34441 bytes_read=105157 bytes_retransmit=0 bytes_invalid=0 send_seq=2416 receive_seq=2416 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.3 sysload=0.29 cputime=89.685 memavail=638784 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.577
Stats 2204.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34491 bytes_read=105356 bytes_retransmit=0 bytes_invalid=0 send_seq=2420 receive_seq=2420 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.1 sysload=0.29 cputime=89.721 memavail=638336 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.777
Stats 2205.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34541 bytes_read=105585 bytes_retransmit=0 bytes_invalid=0 send_seq=2424 receive_seq=2424 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.27 cputime=89.754 memavail=638112 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.586
Stats 2206.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=34639 bytes_read=105813 bytes_retransmit=0 bytes_invalid=0 send_seq=2431 receive_seq=2431 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.2 sysload=0.27 cputime=89.791 memavail=638112 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.565
Stats 2207.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=34689 bytes_read=106026 bytes_retransmit=0 bytes_invalid=0 send_seq=2435 receive_seq=2435 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.27 cputime=89.815 memavail=640980 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.624
Stats 2208.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=34723 bytes_read=106250 bytes_retransmit=0 bytes_invalid=0 send_seq=2438 receive_seq=2438 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.27 cputime=89.849 memavail=640728 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.624
Stats 2209.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=34821 bytes_read=106478 bytes_retransmit=0 bytes_invalid=0 send_seq=2445 receive_seq=2445 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.4 sysload=0.27 cputime=89.885 memavail=640504 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.575
Stats 2210.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=34903 bytes_read=106687 bytes_retransmit=0 bytes_invalid=0 send_seq=2451 receive_seq=2451 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.24 cputime=89.917 memavail=635224 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.515
Stats 2211.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=34953 bytes_read=106916 bytes_retransmit=0 bytes_invalid=0 send_seq=2455 receive_seq=2455 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.2 sysload=0.24 cputime=89.961 memavail=638496 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.630
Stats 2212.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=35003 bytes_read=107143 bytes_retransmit=0 bytes_invalid=0 send_seq=2459 receive_seq=2459 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.24 cputime=90.002 memavail=637696 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.563
Stats 2213.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=35053 bytes_read=107342 bytes_retransmit=0 bytes_invalid=0 send_seq=2463 receive_seq=2463 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.24 cputime=90.037 memavail=640724 print_time=379.580 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.618
Stats 2214.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=35440 bytes_read=107606 bytes_retransmit=0 bytes_invalid=0 send_seq=2474 receive_seq=2474 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=40 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.24 cputime=90.100 memavail=640024 print_time=490.089 buffer_time=16.766 print_stall=0 extruder: target=210 temp=209.9 pwm=0.687
Stats 2215.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=35562 bytes_read=107829 bytes_retransmit=0 bytes_invalid=0 send_seq=2480 receive_seq=2480 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.22 cputime=90.139 memavail=639576 print_time=490.089 buffer_time=15.765 print_stall=0 extruder: target=210 temp=209.9 pwm=0.709
Stats 2216.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=35639 bytes_read=108033 bytes_retransmit=0 bytes_invalid=0 send_seq=2485 receive_seq=2485 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.22 cputime=90.172 memavail=638344 print_time=490.089 buffer_time=14.765 print_stall=0 extruder: target=210 temp=209.9 pwm=0.738
Stats 2217.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=35705 bytes_read=108278 bytes_retransmit=0 bytes_invalid=0 send_seq=2490 receive_seq=2490 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=32.4 sysload=0.22 cputime=90.199 memavail=640444 print_time=490.089 buffer_time=13.764 print_stall=0 extruder: target=210 temp=209.8 pwm=0.710
Stats 2218.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=35755 bytes_read=108479 bytes_retransmit=0 bytes_invalid=0 send_seq=2494 receive_seq=2494 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=23.1 pwm=0.000 mcu_temp: temp=28.2 sysload=0.22 cputime=90.236 memavail=639520 print_time=490.089 buffer_time=12.763 print_stall=0 extruder: target=210 temp=209.9 pwm=0.648
Stats 2219.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=35837 bytes_read=108678 bytes_retransmit=0 bytes_invalid=0 send_seq=2500 receive_seq=2500 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.22 cputime=90.270 memavail=640640 print_time=490.089 buffer_time=11.762 print_stall=0 extruder: target=210 temp=209.5 pwm=0.794
Stats 2220.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=35871 bytes_read=108890 bytes_retransmit=0 bytes_invalid=0 send_seq=2503 receive_seq=2503 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=31.1 sysload=0.21 cputime=90.305 memavail=638968 print_time=490.089 buffer_time=10.761 print_stall=0 extruder: target=210 temp=209.4 pwm=0.794
Stats 2221.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000014 bytes_write=35937 bytes_read=109103 bytes_retransmit=0 bytes_invalid=0 send_seq=2508 receive_seq=2508 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.7 sysload=0.21 cputime=90.340 memavail=640760 print_time=490.089 buffer_time=9.760 print_stall=0 extruder: target=210 temp=209.3 pwm=0.788
Stats 2222.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=36019 bytes_read=109326 bytes_retransmit=0 bytes_invalid=0 send_seq=2514 receive_seq=2514 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.21 cputime=90.367 memavail=641608 print_time=490.089 buffer_time=8.759 print_stall=0 extruder: target=210 temp=208.6 pwm=1.000
Stats 2223.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=36080 bytes_read=109555 bytes_retransmit=0 bytes_invalid=0 send_seq=2518 receive_seq=2518 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=32.2 sysload=0.21 cputime=90.400 memavail=640948 print_time=490.089 buffer_time=7.758 print_stall=0 extruder: target=210 temp=208.9 pwm=0.725
Stats 2224.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=36162 bytes_read=109778 bytes_retransmit=0 bytes_invalid=0 send_seq=2524 receive_seq=2524 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.2 sysload=0.21 cputime=90.432 memavail=640696 print_time=490.089 buffer_time=6.757 print_stall=0 extruder: target=210 temp=208.5 pwm=0.897
Stats 2225.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=36196 bytes_read=109972 bytes_retransmit=0 bytes_invalid=0 send_seq=2527 receive_seq=2527 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.19 cputime=90.463 memavail=640820 print_time=490.089 buffer_time=5.756 print_stall=0 extruder: target=210 temp=208.3 pwm=0.897
Stats 2226.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=36262 bytes_read=110206 bytes_retransmit=0 bytes_invalid=0 send_seq=2532 receive_seq=2532 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.19 cputime=90.496 memavail=640568 print_time=490.089 buffer_time=4.755 print_stall=0 extruder: target=210 temp=208.4 pwm=0.856
Stats 2227.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=36360 bytes_read=110448 bytes_retransmit=0 bytes_invalid=0 send_seq=2539 receive_seq=2539 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.19 cputime=90.522 memavail=640860 print_time=490.089 buffer_time=3.754 print_stall=0 extruder: target=210 temp=208.5 pwm=0.765
Stats 2228.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=36410 bytes_read=110647 bytes_retransmit=0 bytes_invalid=0 send_seq=2543 receive_seq=2543 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=31.0 sysload=0.19 cputime=90.556 memavail=640380 print_time=490.089 buffer_time=2.753 print_stall=0 extruder: target=210 temp=208.3 pwm=0.928
Stats 2229.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=36476 bytes_read=110881 bytes_retransmit=0 bytes_invalid=0 send_seq=2548 receive_seq=2548 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.19 cputime=90.597 memavail=639932 print_time=490.089 buffer_time=1.752 print_stall=0 extruder: target=210 temp=208.2 pwm=1.000
Stats 2230.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=36569 bytes_read=111104 bytes_retransmit=0 bytes_invalid=0 send_seq=2554 receive_seq=2554 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.3 sysload=0.17 cputime=90.635 memavail=639708 print_time=490.089 buffer_time=0.751 print_stall=0 extruder: target=210 temp=208.7 pwm=0.763
Stats 2231.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=36656 bytes_read=111308 bytes_retransmit=0 bytes_invalid=0 send_seq=2559 receive_seq=2559 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.17 cputime=90.673 memavail=639708 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.8 pwm=0.696
Stats 2232.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=36738 bytes_read=111561 bytes_retransmit=0 bytes_invalid=0 send_seq=2565 receive_seq=2565 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.17 cputime=90.704 memavail=639588 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.8 pwm=0.763
Stats 2233.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=36820 bytes_read=111784 bytes_retransmit=0 bytes_invalid=0 send_seq=2571 receive_seq=2571 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.1 sysload=0.17 cputime=90.740 memavail=639140 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.9 pwm=0.761
Stats 2234.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=36886 bytes_read=111988 bytes_retransmit=0 bytes_invalid=0 send_seq=2576 receive_seq=2576 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=32.4 sysload=0.17 cputime=90.777 memavail=638916 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.1 pwm=0.733
Stats 2235.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=36952 bytes_read=112236 bytes_retransmit=0 bytes_invalid=0 send_seq=2581 receive_seq=2581 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.16 cputime=90.815 memavail=640708 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.670
Stats 2236.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=37034 bytes_read=112445 bytes_retransmit=0 bytes_invalid=0 send_seq=2587 receive_seq=2587 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.16 cputime=90.854 memavail=641476 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.539
Stats 2237.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37095 bytes_read=112658 bytes_retransmit=0 bytes_invalid=0 send_seq=2591 receive_seq=2591 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=90.880 memavail=640676 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.444
Stats 2238.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37177 bytes_read=112911 bytes_retransmit=0 bytes_invalid=0 send_seq=2597 receive_seq=2597 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.8 sysload=0.16 cputime=90.915 memavail=640468 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.550
Stats 2239.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37259 bytes_read=113120 bytes_retransmit=0 bytes_invalid=0 send_seq=2603 receive_seq=2603 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.16 cputime=90.947 memavail=640664 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.568
Stats 2240.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37341 bytes_read=113329 bytes_retransmit=0 bytes_invalid=0 send_seq=2609 receive_seq=2609 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.15 cputime=90.981 memavail=640440 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.440
Stats 2241.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37423 bytes_read=113582 bytes_retransmit=0 bytes_invalid=0 send_seq=2615 receive_seq=2615 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.15 cputime=91.017 memavail=639992 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.651
Stats 2242.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37489 bytes_read=113800 bytes_retransmit=0 bytes_invalid=0 send_seq=2620 receive_seq=2620 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.15 cputime=91.047 memavail=640992 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.571
Stats 2243.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37555 bytes_read=114004 bytes_retransmit=0 bytes_invalid=0 send_seq=2625 receive_seq=2625 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=18.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.15 cputime=91.084 memavail=640320 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.422
Stats 2244.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37616 bytes_read=114247 bytes_retransmit=0 bytes_invalid=0 send_seq=2629 receive_seq=2629 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.15 cputime=91.128 memavail=640088 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.628
Stats 2245.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37682 bytes_read=114451 bytes_retransmit=0 bytes_invalid=0 send_seq=2634 receive_seq=2634 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.8 sysload=0.13 cputime=91.164 memavail=639612 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.787
Stats 2246.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37748 bytes_read=114655 bytes_retransmit=0 bytes_invalid=0 send_seq=2639 receive_seq=2639 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.13 cputime=91.199 memavail=639164 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.664
Stats 2247.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37798 bytes_read=114912 bytes_retransmit=0 bytes_invalid=0 send_seq=2643 receive_seq=2643 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.13 cputime=91.227 memavail=639496 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.567
Stats 2248.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37848 bytes_read=115111 bytes_retransmit=0 bytes_invalid=0 send_seq=2647 receive_seq=2647 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=27.8 sysload=0.13 cputime=91.259 memavail=640504 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.761
Stats 2249.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=37930 bytes_read=115320 bytes_retransmit=0 bytes_invalid=0 send_seq=2653 receive_seq=2653 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.13 cputime=91.291 memavail=640500 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.637
Stats 2250.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38002 bytes_read=115584 bytes_retransmit=0 bytes_invalid=0 send_seq=2659 receive_seq=2659 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.12 cputime=91.327 memavail=640052 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.576
Stats 2251.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38068 bytes_read=115788 bytes_retransmit=0 bytes_invalid=0 send_seq=2664 receive_seq=2664 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.12 cputime=91.363 memavail=638848 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.545
Stats 2252.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38145 bytes_read=116006 bytes_retransmit=0 bytes_invalid=0 send_seq=2669 receive_seq=2669 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.12 cputime=91.393 memavail=638992 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.557
Stats 2253.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38195 bytes_read=116249 bytes_retransmit=0 bytes_invalid=0 send_seq=2673 receive_seq=2673 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.12 cputime=91.426 memavail=638768 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.717
Stats 2254.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38272 bytes_read=116453 bytes_retransmit=0 bytes_invalid=0 send_seq=2678 receive_seq=2678 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.7 sysload=0.12 cputime=91.458 memavail=638068 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.558
Stats 2255.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38338 bytes_read=116672 bytes_retransmit=0 bytes_invalid=0 send_seq=2683 receive_seq=2683 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.7 sysload=0.19 cputime=91.493 memavail=640496 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.561
Stats 2256.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=38420 bytes_read=116910 bytes_retransmit=0 bytes_invalid=0 send_seq=2689 receive_seq=2689 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.19 cputime=91.531 memavail=639836 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.410
Stats 2257.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38502 bytes_read=117133 bytes_retransmit=0 bytes_invalid=0 send_seq=2695 receive_seq=2695 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.19 cputime=91.557 memavail=641108 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.568
Stats 2258.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38579 bytes_read=117352 bytes_retransmit=0 bytes_invalid=0 send_seq=2700 receive_seq=2700 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.19 cputime=91.593 memavail=641292 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.442
Stats 2259.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38645 bytes_read=117585 bytes_retransmit=0 bytes_invalid=0 send_seq=2705 receive_seq=2705 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.19 cputime=91.636 memavail=640844 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.571
Stats 2260.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38695 bytes_read=117784 bytes_retransmit=0 bytes_invalid=0 send_seq=2709 receive_seq=2709 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=23.4 pwm=0.000 mcu_temp: temp=28.4 sysload=0.18 cputime=91.671 memavail=639896 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.663
Stats 2261.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38745 bytes_read=117998 bytes_retransmit=0 bytes_invalid=0 send_seq=2713 receive_seq=2713 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.1 sysload=0.18 cputime=91.704 memavail=641368 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.589
Stats 2262.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38827 bytes_read=118250 bytes_retransmit=0 bytes_invalid=0 send_seq=2719 receive_seq=2719 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.6 sysload=0.18 cputime=91.732 memavail=639536 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.709
Stats 2263.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38909 bytes_read=118459 bytes_retransmit=0 bytes_invalid=0 send_seq=2725 receive_seq=2725 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.9 pwm=0.000 mcu_temp: temp=31.4 sysload=0.18 cputime=91.769 memavail=641172 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.665
Stats 2264.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=38959 bytes_read=118673 bytes_retransmit=0 bytes_invalid=0 send_seq=2729 receive_seq=2729 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.9 sysload=0.18 cputime=91.802 memavail=640724 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.560
Stats 2265.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39041 bytes_read=118911 bytes_retransmit=0 bytes_invalid=0 send_seq=2735 receive_seq=2735 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.0 sysload=0.16 cputime=91.836 memavail=640248 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.623
Stats 2266.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39107 bytes_read=119115 bytes_retransmit=0 bytes_invalid=0 send_seq=2740 receive_seq=2740 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=31.3 sysload=0.16 cputime=91.869 memavail=638752 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.600
Stats 2267.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39168 bytes_read=119343 bytes_retransmit=0 bytes_invalid=0 send_seq=2744 receive_seq=2744 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.16 cputime=91.897 memavail=641044 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.614
Stats 2268.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39229 bytes_read=119571 bytes_retransmit=0 bytes_invalid=0 send_seq=2748 receive_seq=2748 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.16 cputime=91.932 memavail=640768 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.696
Stats 2269.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39311 bytes_read=119780 bytes_retransmit=0 bytes_invalid=0 send_seq=2754 receive_seq=2754 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.16 cputime=91.966 memavail=640772 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.653
Stats 2270.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39388 bytes_read=119999 bytes_retransmit=0 bytes_invalid=0 send_seq=2759 receive_seq=2759 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.6 sysload=0.15 cputime=91.999 memavail=640548 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.587
Stats 2271.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39470 bytes_read=120237 bytes_retransmit=0 bytes_invalid=0 send_seq=2765 receive_seq=2765 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.15 cputime=92.035 memavail=641384 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.909
Stats 2272.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39536 bytes_read=120455 bytes_retransmit=0 bytes_invalid=0 send_seq=2770 receive_seq=2770 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.15 cputime=92.061 memavail=639080 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.555
Stats 2273.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39586 bytes_read=120669 bytes_retransmit=0 bytes_invalid=0 send_seq=2774 receive_seq=2774 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.15 cputime=92.096 memavail=638856 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.635
Stats 2274.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39620 bytes_read=120892 bytes_retransmit=0 bytes_invalid=0 send_seq=2777 receive_seq=2777 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.15 cputime=92.131 memavail=638632 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.635
Stats 2275.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39654 bytes_read=121086 bytes_retransmit=0 bytes_invalid=0 send_seq=2780 receive_seq=2780 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.14 cputime=92.165 memavail=638184 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.635
Stats 2276.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=39715 bytes_read=121300 bytes_retransmit=0 bytes_invalid=0 send_seq=2784 receive_seq=2784 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.14 cputime=92.200 memavail=641572 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.647
Stats 2277.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=39797 bytes_read=121543 bytes_retransmit=0 bytes_invalid=0 send_seq=2790 receive_seq=2790 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.5 sysload=0.14 cputime=92.230 memavail=641092 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.640
Stats 2278.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=39895 bytes_read=121746 bytes_retransmit=0 bytes_invalid=0 send_seq=2797 receive_seq=2797 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.0 sysload=0.14 cputime=92.265 memavail=640644 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.482
Stats 2279.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=39956 bytes_read=121949 bytes_retransmit=0 bytes_invalid=0 send_seq=2801 receive_seq=2801 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.4 sysload=0.14 cputime=92.302 memavail=640900 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.695
Stats 2280.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40022 bytes_read=122170 bytes_retransmit=0 bytes_invalid=0 send_seq=2806 receive_seq=2806 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=92.338 memavail=641308 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.674
Stats 2281.0: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40104 bytes_read=122379 bytes_retransmit=0 bytes_invalid=0 send_seq=2812 receive_seq=2812 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.7 sysload=0.13 cputime=92.371 memavail=640760 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.612
Stats 2282.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40149 bytes_read=122602 bytes_retransmit=0 bytes_invalid=0 send_seq=2815 receive_seq=2815 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.6 sysload=0.13 cputime=92.397 memavail=641048 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.487
Stats 2283.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40215 bytes_read=122835 bytes_retransmit=0 bytes_invalid=0 send_seq=2820 receive_seq=2820 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.13 cputime=92.434 memavail=640836 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.526
Stats 2284.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40297 bytes_read=123044 bytes_retransmit=0 bytes_invalid=0 send_seq=2826 receive_seq=2826 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=92.467 memavail=640880 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.607
Stats 2285.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40374 bytes_read=123263 bytes_retransmit=0 bytes_invalid=0 send_seq=2831 receive_seq=2831 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.1 sysload=0.12 cputime=92.500 memavail=640660 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.694
Stats 2286.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40456 bytes_read=123501 bytes_retransmit=0 bytes_invalid=0 send_seq=2837 receive_seq=2837 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.1 sysload=0.12 cputime=92.535 memavail=642248 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.552
Stats 2287.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40538 bytes_read=123724 bytes_retransmit=0 bytes_invalid=0 send_seq=2843 receive_seq=2843 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.12 cputime=92.563 memavail=641068 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.678
Stats 2288.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40615 bytes_read=123943 bytes_retransmit=0 bytes_invalid=0 send_seq=2848 receive_seq=2848 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.12 cputime=92.597 memavail=640116 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.673
Stats 2289.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40692 bytes_read=124176 bytes_retransmit=0 bytes_invalid=0 send_seq=2853 receive_seq=2853 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.12 cputime=92.632 memavail=641468 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.694
Stats 2290.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40758 bytes_read=124380 bytes_retransmit=0 bytes_invalid=0 send_seq=2858 receive_seq=2858 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.6 sysload=0.11 cputime=92.665 memavail=641020 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.534
Stats 2291.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=40819 bytes_read=124594 bytes_retransmit=0 bytes_invalid=0 send_seq=2862 receive_seq=2862 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.11 cputime=92.701 memavail=640932 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.737
Stats 2292.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40917 bytes_read=124846 bytes_retransmit=0 bytes_invalid=0 send_seq=2869 receive_seq=2868 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.2 sysload=0.11 cputime=92.727 memavail=640004 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.656
Stats 2293.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=40951 bytes_read=125045 bytes_retransmit=0 bytes_invalid=0 send_seq=2872 receive_seq=2872 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.5 sysload=0.11 cputime=92.759 memavail=640680 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.656
Stats 2294.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41012 bytes_read=125259 bytes_retransmit=0 bytes_invalid=0 send_seq=2876 receive_seq=2876 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.11 cputime=92.794 memavail=640204 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.509
Stats 2295.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41094 bytes_read=125497 bytes_retransmit=0 bytes_invalid=0 send_seq=2882 receive_seq=2882 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.10 cputime=92.828 memavail=639756 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.605
Stats 2296.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41144 bytes_read=125696 bytes_retransmit=0 bytes_invalid=0 send_seq=2886 receive_seq=2886 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.8 sysload=0.10 cputime=92.861 memavail=640784 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.519
Stats 2297.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41221 bytes_read=125929 bytes_retransmit=0 bytes_invalid=0 send_seq=2891 receive_seq=2891 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.10 cputime=92.888 memavail=640664 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.674
Stats 2298.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41303 bytes_read=126167 bytes_retransmit=0 bytes_invalid=0 send_seq=2897 receive_seq=2897 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=33.8 sysload=0.10 cputime=92.923 memavail=640216 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.530
Stats 2299.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41385 bytes_read=126376 bytes_retransmit=0 bytes_invalid=0 send_seq=2903 receive_seq=2903 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.10 cputime=92.955 memavail=639992 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.583
Stats 2300.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41419 bytes_read=126585 bytes_retransmit=0 bytes_invalid=0 send_seq=2906 receive_seq=2906 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.3 sysload=0.09 cputime=92.989 memavail=641372 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.583
Stats 2301.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=41485 bytes_read=126818 bytes_retransmit=0 bytes_invalid=0 send_seq=2911 receive_seq=2911 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.09 cputime=93.024 memavail=641264 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.632
Stats 2302.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=41535 bytes_read=127031 bytes_retransmit=0 bytes_invalid=0 send_seq=2915 receive_seq=2915 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.8 sysload=0.09 cputime=93.052 memavail=639740 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.758
Stats 2303.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=41612 bytes_read=127250 bytes_retransmit=0 bytes_invalid=0 send_seq=2920 receive_seq=2920 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.09 cputime=93.084 memavail=639516 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.551
Stats 2304.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=41646 bytes_read=127473 bytes_retransmit=0 bytes_invalid=0 send_seq=2923 receive_seq=2923 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.09 cputime=93.119 memavail=639068 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.551
Stats 2305.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=41728 bytes_read=127682 bytes_retransmit=0 bytes_invalid=0 send_seq=2929 receive_seq=2929 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.08 cputime=93.151 memavail=638628 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.522
Stats 2306.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=41789 bytes_read=127911 bytes_retransmit=0 bytes_invalid=0 send_seq=2933 receive_seq=2933 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=32.5 sysload=0.08 cputime=93.185 memavail=641376 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.559
Stats 2307.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=41866 bytes_read=128143 bytes_retransmit=0 bytes_invalid=0 send_seq=2938 receive_seq=2938 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.08 cputime=93.214 memavail=641040 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.695
Stats 2308.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=41932 bytes_read=128347 bytes_retransmit=0 bytes_invalid=0 send_seq=2943 receive_seq=2943 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.08 cputime=93.249 memavail=640864 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.613
Stats 2309.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=42009 bytes_read=128581 bytes_retransmit=0 bytes_invalid=0 send_seq=2948 receive_seq=2948 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.08 cputime=93.286 memavail=640392 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.640
Stats 2310.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=42043 bytes_read=128789 bytes_retransmit=0 bytes_invalid=0 send_seq=2951 receive_seq=2951 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.8 sysload=0.08 cputime=93.318 memavail=640392 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.640
Stats 2311.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000011 bytes_write=42115 bytes_read=129009 bytes_retransmit=0 bytes_invalid=0 send_seq=2957 receive_seq=2957 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.08 cputime=93.352 memavail=640852 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.589
Stats 2312.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42165 bytes_read=129252 bytes_retransmit=0 bytes_invalid=0 send_seq=2961 receive_seq=2961 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.08 cputime=93.379 memavail=639220 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.666
Stats 2313.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42258 bytes_read=129475 bytes_retransmit=0 bytes_invalid=0 send_seq=2967 receive_seq=2967 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.8 sysload=0.08 cputime=93.413 memavail=638996 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.640
Stats 2314.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42340 bytes_read=129684 bytes_retransmit=0 bytes_invalid=0 send_seq=2973 receive_seq=2973 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=26.9 sysload=0.08 cputime=93.444 memavail=640764 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.750
Stats 2315.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42406 bytes_read=129918 bytes_retransmit=0 bytes_invalid=0 send_seq=2978 receive_seq=2978 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.07 cputime=93.480 memavail=640288 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.628
Stats 2316.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42472 bytes_read=130136 bytes_retransmit=0 bytes_invalid=0 send_seq=2983 receive_seq=2983 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.07 cputime=93.515 memavail=640556 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.698
Stats 2317.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42538 bytes_read=130354 bytes_retransmit=0 bytes_invalid=0 send_seq=2988 receive_seq=2988 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.3 sysload=0.07 cputime=93.537 memavail=640904 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.581
Stats 2318.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42615 bytes_read=130588 bytes_retransmit=0 bytes_invalid=0 send_seq=2993 receive_seq=2993 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.07 cputime=93.570 memavail=640964 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.609
Stats 2319.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42681 bytes_read=130806 bytes_retransmit=0 bytes_invalid=0 send_seq=2998 receive_seq=2998 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.1 sysload=0.07 cputime=93.606 memavail=640700 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.650
Stats 2320.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42742 bytes_read=131005 bytes_retransmit=0 bytes_invalid=0 send_seq=3002 receive_seq=3002 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.14 cputime=93.640 memavail=640476 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.537
Stats 2321.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=42819 bytes_read=131239 bytes_retransmit=0 bytes_invalid=0 send_seq=3007 receive_seq=3007 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.14 cputime=93.675 memavail=641832 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.556
Stats 2322.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=42901 bytes_read=131476 bytes_retransmit=0 bytes_invalid=0 send_seq=3013 receive_seq=3013 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.14 cputime=93.707 memavail=638692 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.511
Stats 2323.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=42967 bytes_read=131680 bytes_retransmit=0 bytes_invalid=0 send_seq=3018 receive_seq=3018 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.8 sysload=0.14 cputime=93.744 memavail=638020 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.687
Stats 2324.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43049 bytes_read=131919 bytes_retransmit=0 bytes_invalid=0 send_seq=3024 receive_seq=3024 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=33.2 sysload=0.14 cputime=93.781 memavail=637572 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.687
Stats 2325.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43131 bytes_read=132142 bytes_retransmit=0 bytes_invalid=0 send_seq=3030 receive_seq=3030 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.13 cputime=93.819 memavail=637348 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.561
Stats 2326.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43213 bytes_read=132351 bytes_retransmit=0 bytes_invalid=0 send_seq=3036 receive_seq=3036 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.8 sysload=0.13 cputime=93.858 memavail=641820 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.675
Stats 2327.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=43290 bytes_read=132599 bytes_retransmit=0 bytes_invalid=0 send_seq=3041 receive_seq=3041 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.13 cputime=93.886 memavail=640604 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.775
Stats 2328.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=43388 bytes_read=132827 bytes_retransmit=0 bytes_invalid=0 send_seq=3048 receive_seq=3048 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.7 sysload=0.13 cputime=93.922 memavail=640156 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.675
Stats 2329.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=43438 bytes_read=133026 bytes_retransmit=0 bytes_invalid=0 send_seq=3052 receive_seq=3052 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.13 cputime=93.954 memavail=641304 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.602
Stats 2330.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=43488 bytes_read=133255 bytes_retransmit=0 bytes_invalid=0 send_seq=3056 receive_seq=3056 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=32.3 sysload=0.12 cputime=93.988 memavail=641304 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.661
Stats 2331.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=43538 bytes_read=133468 bytes_retransmit=0 bytes_invalid=0 send_seq=3060 receive_seq=3060 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.12 cputime=94.019 memavail=637300 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.522
Stats 2332.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43620 bytes_read=133691 bytes_retransmit=0 bytes_invalid=0 send_seq=3066 receive_seq=3066 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=32.9 sysload=0.12 cputime=94.043 memavail=639656 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.515
Stats 2333.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43702 bytes_read=133930 bytes_retransmit=0 bytes_invalid=0 send_seq=3072 receive_seq=3072 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.12 cputime=94.079 memavail=638984 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.668
Stats 2334.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43779 bytes_read=134148 bytes_retransmit=0 bytes_invalid=0 send_seq=3077 receive_seq=3077 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.12 cputime=94.113 memavail=641128 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.510
Stats 2335.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43845 bytes_read=134352 bytes_retransmit=0 bytes_invalid=0 send_seq=3082 receive_seq=3082 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.5 sysload=0.11 cputime=94.146 memavail=640456 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.543
Stats 2336.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=43911 bytes_read=134584 bytes_retransmit=0 bytes_invalid=0 send_seq=3087 receive_seq=3087 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.11 cputime=94.181 memavail=641600 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.538
Stats 2337.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44009 bytes_read=134815 bytes_retransmit=0 bytes_invalid=0 send_seq=3094 receive_seq=3094 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.7 sysload=0.11 cputime=94.208 memavail=640876 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.709
Stats 2338.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44086 bytes_read=135009 bytes_retransmit=0 bytes_invalid=0 send_seq=3099 receive_seq=3099 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.11 cputime=94.243 memavail=640400 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.595
Stats 2339.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44120 bytes_read=135221 bytes_retransmit=0 bytes_invalid=0 send_seq=3102 receive_seq=3102 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.11 cputime=94.274 memavail=640176 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.595
Stats 2340.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44154 bytes_read=135422 bytes_retransmit=0 bytes_invalid=0 send_seq=3105 receive_seq=3105 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.5 sysload=0.18 cputime=94.312 memavail=641372 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.595
Stats 2341.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44220 bytes_read=135626 bytes_retransmit=0 bytes_invalid=0 send_seq=3110 receive_seq=3110 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.18 cputime=94.346 memavail=641748 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.606
Stats 2342.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44286 bytes_read=135874 bytes_retransmit=0 bytes_invalid=0 send_seq=3115 receive_seq=3115 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.18 cputime=94.374 memavail=639392 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.655
Stats 2343.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44352 bytes_read=136092 bytes_retransmit=0 bytes_invalid=0 send_seq=3120 receive_seq=3120 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=94.409 memavail=638916 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.715
Stats 2344.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44418 bytes_read=136296 bytes_retransmit=0 bytes_invalid=0 send_seq=3125 receive_seq=3125 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.18 cputime=94.444 memavail=640660 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.523
Stats 2345.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44495 bytes_read=136530 bytes_retransmit=0 bytes_invalid=0 send_seq=3130 receive_seq=3130 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.6 sysload=0.25 cputime=94.483 memavail=639708 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.608
Stats 2346.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44577 bytes_read=136753 bytes_retransmit=0 bytes_invalid=0 send_seq=3136 receive_seq=3136 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.25 cputime=94.516 memavail=640636 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.635
Stats 2347.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44611 bytes_read=136961 bytes_retransmit=0 bytes_invalid=0 send_seq=3139 receive_seq=3139 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.5 sysload=0.25 cputime=94.540 memavail=641264 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.635
Stats 2348.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44693 bytes_read=137200 bytes_retransmit=0 bytes_invalid=0 send_seq=3145 receive_seq=3145 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.25 cputime=94.577 memavail=640788 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.590
Stats 2349.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44759 bytes_read=137418 bytes_retransmit=0 bytes_invalid=0 send_seq=3150 receive_seq=3150 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=27.7 sysload=0.25 cputime=94.610 memavail=641064 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.446
Stats 2350.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=44841 bytes_read=137627 bytes_retransmit=0 bytes_invalid=0 send_seq=3156 receive_seq=3156 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.9 sysload=0.31 cputime=94.643 memavail=640616 print_time=490.089 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.566
Stats 2351.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=45290 bytes_read=137891 bytes_retransmit=0 bytes_invalid=0 send_seq=3167 receive_seq=3167 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.8 sysload=0.31 cputime=94.707 memavail=641576 print_time=630.152 buffer_time=19.713 print_stall=0 extruder: target=210 temp=210.0 pwm=0.559
Stats 2352.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=45367 bytes_read=138124 bytes_retransmit=0 bytes_invalid=0 send_seq=3172 receive_seq=3172 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.6 sysload=0.31 cputime=94.736 memavail=638900 print_time=630.152 buffer_time=18.712 print_stall=0 extruder: target=210 temp=210.0 pwm=0.648
Stats 2353.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=45417 bytes_read=138323 bytes_retransmit=0 bytes_invalid=0 send_seq=3176 receive_seq=3176 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=31.5 sysload=0.31 cputime=94.772 memavail=638452 print_time=630.152 buffer_time=17.711 print_stall=0 extruder: target=210 temp=210.2 pwm=0.557
Stats 2354.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=45483 bytes_read=138571 bytes_retransmit=0 bytes_invalid=0 send_seq=3181 receive_seq=3181 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.31 cputime=94.808 memavail=637976 print_time=630.152 buffer_time=16.710 print_stall=0 extruder: target=210 temp=210.3 pwm=0.449
Stats 2355.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=45581 bytes_read=138785 bytes_retransmit=0 bytes_invalid=0 send_seq=3188 receive_seq=3188 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=32.3 sysload=0.36 cputime=94.841 memavail=637752 print_time=630.152 buffer_time=15.709 print_stall=0 extruder: target=210 temp=210.0 pwm=0.617
Stats 2356.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=45647 bytes_read=138989 bytes_retransmit=0 bytes_invalid=0 send_seq=3193 receive_seq=3193 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=32.3 sysload=0.36 cputime=94.874 memavail=641700 print_time=630.152 buffer_time=14.709 print_stall=0 extruder: target=210 temp=209.9 pwm=0.585
Stats 2357.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=45697 bytes_read=139246 bytes_retransmit=0 bytes_invalid=0 send_seq=3197 receive_seq=3197 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.0 sysload=0.36 cputime=94.902 memavail=640776 print_time=630.152 buffer_time=13.708 print_stall=0 extruder: target=210 temp=209.4 pwm=0.804
Stats 2358.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=45779 bytes_read=139455 bytes_retransmit=0 bytes_invalid=0 send_seq=3203 receive_seq=3203 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.36 cputime=94.937 memavail=640740 print_time=630.152 buffer_time=12.707 print_stall=0 extruder: target=210 temp=209.0 pwm=0.910
Stats 2359.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=45845 bytes_read=139659 bytes_retransmit=0 bytes_invalid=0 send_seq=3208 receive_seq=3208 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.8 sysload=0.36 cputime=94.972 memavail=639788 print_time=630.152 buffer_time=11.706 print_stall=0 extruder: target=210 temp=208.9 pwm=0.890
Stats 2360.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=45911 bytes_read=139907 bytes_retransmit=0 bytes_invalid=0 send_seq=3213 receive_seq=3213 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.42 cputime=95.008 memavail=639564 print_time=630.152 buffer_time=10.705 print_stall=0 extruder: target=210 temp=208.8 pwm=0.806
Stats 2361.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46009 bytes_read=140121 bytes_retransmit=0 bytes_invalid=0 send_seq=3220 receive_seq=3220 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=31.7 sysload=0.42 cputime=95.045 memavail=641688 print_time=630.152 buffer_time=9.704 print_stall=0 extruder: target=210 temp=208.6 pwm=0.914
Stats 2362.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46059 bytes_read=140334 bytes_retransmit=0 bytes_invalid=0 send_seq=3224 receive_seq=3224 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.2 sysload=0.42 cputime=95.071 memavail=638804 print_time=630.152 buffer_time=8.703 print_stall=0 extruder: target=210 temp=208.6 pwm=0.861
Stats 2363.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46109 bytes_read=140577 bytes_retransmit=0 bytes_invalid=0 send_seq=3228 receive_seq=3228 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.42 cputime=95.109 memavail=640832 print_time=630.152 buffer_time=7.703 print_stall=0 extruder: target=210 temp=208.5 pwm=0.854
Stats 2364.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46191 bytes_read=140786 bytes_retransmit=0 bytes_invalid=0 send_seq=3234 receive_seq=3234 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.42 cputime=95.141 memavail=639852 print_time=630.152 buffer_time=6.701 print_stall=0 extruder: target=210 temp=208.7 pwm=0.646
Stats 2365.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46252 bytes_read=140985 bytes_retransmit=0 bytes_invalid=0 send_seq=3238 receive_seq=3238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.46 cputime=95.173 memavail=639856 print_time=630.152 buffer_time=5.700 print_stall=0 extruder: target=210 temp=208.7 pwm=0.715
Stats 2366.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46329 bytes_read=141233 bytes_retransmit=0 bytes_invalid=0 send_seq=3243 receive_seq=3243 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.9 pwm=0.000 mcu_temp: temp=30.9 sysload=0.46 cputime=95.211 memavail=641076 print_time=630.152 buffer_time=4.699 print_stall=0 extruder: target=210 temp=208.8 pwm=0.776
Stats 2367.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46411 bytes_read=141456 bytes_retransmit=0 bytes_invalid=0 send_seq=3249 receive_seq=3249 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.46 cputime=95.239 memavail=640868 print_time=630.152 buffer_time=3.698 print_stall=0 extruder: target=210 temp=208.8 pwm=0.782
Stats 2368.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46445 bytes_read=141650 bytes_retransmit=0 bytes_invalid=0 send_seq=3252 receive_seq=3252 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=31.2 sysload=0.46 cputime=95.272 memavail=640660 print_time=630.152 buffer_time=2.697 print_stall=0 extruder: target=210 temp=208.9 pwm=0.782
Stats 2369.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46495 bytes_read=141893 bytes_retransmit=0 bytes_invalid=0 send_seq=3256 receive_seq=3256 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.46 cputime=95.306 memavail=640184 print_time=630.152 buffer_time=1.696 print_stall=0 extruder: target=210 temp=209.0 pwm=0.739
Stats 2370.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46545 bytes_read=142092 bytes_retransmit=0 bytes_invalid=0 send_seq=3260 receive_seq=3260 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.9 sysload=0.43 cputime=95.337 memavail=639960 print_time=630.152 buffer_time=0.695 print_stall=0 extruder: target=210 temp=209.1 pwm=0.739
Stats 2371.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=46665 bytes_read=142301 bytes_retransmit=0 bytes_invalid=0 send_seq=3266 receive_seq=3266 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.43 cputime=95.371 memavail=641592 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.2 pwm=0.778
Stats 2372.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=46748 bytes_read=142579 bytes_retransmit=0 bytes_invalid=0 send_seq=3272 receive_seq=3272 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.43 cputime=95.399 memavail=638920 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.0 pwm=0.898
Stats 2373.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=46814 bytes_read=142783 bytes_retransmit=0 bytes_invalid=0 send_seq=3277 receive_seq=3277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.43 cputime=95.430 memavail=638696 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.666
Stats 2374.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=46891 bytes_read=143002 bytes_retransmit=0 bytes_invalid=0 send_seq=3282 receive_seq=3282 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.43 cputime=95.462 memavail=638708 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.610
Stats 2375.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=46941 bytes_read=143230 bytes_retransmit=0 bytes_invalid=0 send_seq=3286 receive_seq=3286 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.4 sysload=0.39 cputime=95.492 memavail=638484 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.705
Stats 2376.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=47018 bytes_read=143434 bytes_retransmit=0 bytes_invalid=0 send_seq=3291 receive_seq=3291 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=27.4 sysload=0.39 cputime=95.525 memavail=641024 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.716
Stats 2377.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47068 bytes_read=143662 bytes_retransmit=0 bytes_invalid=0 send_seq=3295 receive_seq=3295 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.39 cputime=95.553 memavail=641008 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.569
Stats 2378.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47134 bytes_read=143895 bytes_retransmit=0 bytes_invalid=0 send_seq=3300 receive_seq=3300 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.1 sysload=0.39 cputime=95.588 memavail=640336 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.511
Stats 2379.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47200 bytes_read=144099 bytes_retransmit=0 bytes_invalid=0 send_seq=3305 receive_seq=3305 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=24.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.39 cputime=95.622 memavail=639384 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.494
Stats 2380.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47234 bytes_read=144308 bytes_retransmit=0 bytes_invalid=0 send_seq=3308 receive_seq=3308 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.36 cputime=95.657 memavail=638908 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.494
Stats 2381.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47316 bytes_read=144546 bytes_retransmit=0 bytes_invalid=0 send_seq=3314 receive_seq=3314 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.36 cputime=95.691 memavail=641768 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.560
Stats 2382.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=47350 bytes_read=144754 bytes_retransmit=0 bytes_invalid=0 send_seq=3317 receive_seq=3317 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.1 sysload=0.36 cputime=95.720 memavail=639116 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.560
Stats 2383.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=47411 bytes_read=144968 bytes_retransmit=0 bytes_invalid=0 send_seq=3321 receive_seq=3321 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.36 cputime=95.752 memavail=638892 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.479
Stats 2384.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=47477 bytes_read=145201 bytes_retransmit=0 bytes_invalid=0 send_seq=3326 receive_seq=3326 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.36 cputime=95.785 memavail=640392 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.3 pwm=0.505
Stats 2385.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=47559 bytes_read=145410 bytes_retransmit=0 bytes_invalid=0 send_seq=3332 receive_seq=3332 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=26.4 sysload=0.33 cputime=95.819 memavail=639664 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.593
Stats 2386.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=47609 bytes_read=145624 bytes_retransmit=0 bytes_invalid=0 send_seq=3336 receive_seq=3336 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.33 cputime=95.853 memavail=640900 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.528
Stats 2387.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47691 bytes_read=145876 bytes_retransmit=0 bytes_invalid=0 send_seq=3342 receive_seq=3342 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.33 cputime=95.882 memavail=640868 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.788
Stats 2388.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47773 bytes_read=146085 bytes_retransmit=0 bytes_invalid=0 send_seq=3348 receive_seq=3348 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=32.8 sysload=0.33 cputime=95.915 memavail=641120 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.739
Stats 2389.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47850 bytes_read=146304 bytes_retransmit=0 bytes_invalid=0 send_seq=3353 receive_seq=3353 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.33 cputime=95.950 memavail=640448 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.649
Stats 2390.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=47927 bytes_read=146537 bytes_retransmit=0 bytes_invalid=0 send_seq=3358 receive_seq=3358 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.30 cputime=95.985 memavail=640224 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.594
Stats 2391.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48009 bytes_read=146746 bytes_retransmit=0 bytes_invalid=0 send_seq=3364 receive_seq=3364 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.8 sysload=0.30 cputime=96.018 memavail=641556 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.548
Stats 2392.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48070 bytes_read=146974 bytes_retransmit=0 bytes_invalid=0 send_seq=3368 receive_seq=3368 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.9 sysload=0.30 cputime=96.045 memavail=639432 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.518
Stats 2393.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48136 bytes_read=147207 bytes_retransmit=0 bytes_invalid=0 send_seq=3373 receive_seq=3373 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.3 sysload=0.30 cputime=96.080 memavail=638984 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.609
Stats 2394.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48218 bytes_read=147416 bytes_retransmit=0 bytes_invalid=0 send_seq=3379 receive_seq=3379 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.0 sysload=0.30 cputime=96.111 memavail=638760 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.626
Stats 2395.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48295 bytes_read=147635 bytes_retransmit=0 bytes_invalid=0 send_seq=3384 receive_seq=3384 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.8 sysload=0.28 cputime=96.148 memavail=638536 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.640
Stats 2396.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48361 bytes_read=147862 bytes_retransmit=0 bytes_invalid=0 send_seq=3389 receive_seq=3389 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.28 cputime=96.182 memavail=641108 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.676
Stats 2397.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48454 bytes_read=148075 bytes_retransmit=0 bytes_invalid=0 send_seq=3395 receive_seq=3395 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.8 sysload=0.28 cputime=96.209 memavail=641088 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.459
Stats 2398.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48520 bytes_read=148283 bytes_retransmit=0 bytes_invalid=0 send_seq=3400 receive_seq=3400 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.28 cputime=96.243 memavail=641088 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.591
Stats 2399.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48586 bytes_read=148504 bytes_retransmit=0 bytes_invalid=0 send_seq=3405 receive_seq=3405 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.28 cputime=96.276 memavail=641060 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.661
Stats 2400.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48652 bytes_read=148707 bytes_retransmit=0 bytes_invalid=0 send_seq=3410 receive_seq=3410 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.26 cputime=96.308 memavail=641532 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.703
Stats 2401.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=48729 bytes_read=148926 bytes_retransmit=0 bytes_invalid=0 send_seq=3415 receive_seq=3415 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.26 cputime=96.340 memavail=640692 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.595
Stats 2402.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=48779 bytes_read=149168 bytes_retransmit=0 bytes_invalid=0 send_seq=3419 receive_seq=3419 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.26 cputime=96.367 memavail=641408 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.568
Stats 2403.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=48861 bytes_read=149377 bytes_retransmit=0 bytes_invalid=0 send_seq=3425 receive_seq=3425 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.26 cputime=96.401 memavail=640896 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.603
Stats 2404.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=48933 bytes_read=149591 bytes_retransmit=0 bytes_invalid=0 send_seq=3429 receive_seq=3429 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.26 cputime=96.434 memavail=640924 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.548
Stats 2405.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=48999 bytes_read=149824 bytes_retransmit=0 bytes_invalid=0 send_seq=3434 receive_seq=3434 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.3 sysload=0.32 cputime=96.468 memavail=640924 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.754
Stats 2406.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=49097 bytes_read=150038 bytes_retransmit=0 bytes_invalid=0 send_seq=3441 receive_seq=3441 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.9 sysload=0.32 cputime=96.502 memavail=641092 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.591
Stats 2407.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49142 bytes_read=150261 bytes_retransmit=0 bytes_invalid=0 send_seq=3444 receive_seq=3444 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.32 cputime=96.529 memavail=641076 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.648
Stats 2408.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49208 bytes_read=150494 bytes_retransmit=0 bytes_invalid=0 send_seq=3449 receive_seq=3449 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.32 cputime=96.563 memavail=640628 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.452
Stats 2409.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49274 bytes_read=150698 bytes_retransmit=0 bytes_invalid=0 send_seq=3454 receive_seq=3454 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.6 sysload=0.32 cputime=96.595 memavail=640180 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.686
Stats 2410.1: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49324 bytes_read=150912 bytes_retransmit=0 bytes_invalid=0 send_seq=3458 receive_seq=3458 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.29 cputime=96.628 memavail=639732 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.507
Stats 2411.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49374 bytes_read=151140 bytes_retransmit=0 bytes_invalid=0 send_seq=3462 receive_seq=3462 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.29 cputime=96.661 memavail=641220 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.606
Stats 2412.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=49456 bytes_read=151363 bytes_retransmit=0 bytes_invalid=0 send_seq=3468 receive_seq=3468 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.29 cputime=96.688 memavail=641864 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.686
Stats 2413.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=49517 bytes_read=151577 bytes_retransmit=0 bytes_invalid=0 send_seq=3472 receive_seq=3472 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.0 sysload=0.29 cputime=96.721 memavail=640944 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.455
Stats 2414.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=49599 bytes_read=151810 bytes_retransmit=0 bytes_invalid=0 send_seq=3478 receive_seq=3477 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.9 sysload=0.29 cputime=96.756 memavail=640496 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.630
Stats 2415.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=49676 bytes_read=152019 bytes_retransmit=0 bytes_invalid=0 send_seq=3483 receive_seq=3483 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.27 cputime=96.788 memavail=640048 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.693
Stats 2416.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=49737 bytes_read=152233 bytes_retransmit=0 bytes_invalid=0 send_seq=3487 receive_seq=3487 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.27 cputime=96.818 memavail=640672 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.662
Stats 2417.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49819 bytes_read=152480 bytes_retransmit=0 bytes_invalid=0 send_seq=3493 receive_seq=3492 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=32.1 sysload=0.27 cputime=96.857 memavail=640724 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.658
Stats 2418.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49869 bytes_read=152684 bytes_retransmit=0 bytes_invalid=0 send_seq=3497 receive_seq=3497 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=33.1 sysload=0.27 cputime=96.893 memavail=639240 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.576
Stats 2419.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49903 bytes_read=152893 bytes_retransmit=0 bytes_invalid=0 send_seq=3500 receive_seq=3500 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.9 sysload=0.27 cputime=96.925 memavail=639240 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.576
Stats 2420.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=49969 bytes_read=153126 bytes_retransmit=0 bytes_invalid=0 send_seq=3505 receive_seq=3505 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.6 sysload=0.25 cputime=96.958 memavail=638988 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.643
Stats 2421.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50051 bytes_read=153335 bytes_retransmit=0 bytes_invalid=0 send_seq=3511 receive_seq=3511 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.0 sysload=0.25 cputime=96.988 memavail=639860 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.687
Stats 2422.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50112 bytes_read=153563 bytes_retransmit=0 bytes_invalid=0 send_seq=3515 receive_seq=3515 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.25 cputime=97.015 memavail=637340 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.693
Stats 2423.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50194 bytes_read=153801 bytes_retransmit=0 bytes_invalid=0 send_seq=3521 receive_seq=3521 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.1 sysload=0.25 cputime=97.050 memavail=637124 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.674
Stats 2424.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50276 bytes_read=154010 bytes_retransmit=0 bytes_invalid=0 send_seq=3527 receive_seq=3527 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.25 cputime=97.083 memavail=640556 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.598
Stats 2425.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50326 bytes_read=154224 bytes_retransmit=0 bytes_invalid=0 send_seq=3531 receive_seq=3531 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.23 cputime=97.115 memavail=640108 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.502
Stats 2426.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50408 bytes_read=154462 bytes_retransmit=0 bytes_invalid=0 send_seq=3537 receive_seq=3537 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.23 cputime=97.149 memavail=642236 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.542
Stats 2427.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=50474 bytes_read=154680 bytes_retransmit=0 bytes_invalid=0 send_seq=3542 receive_seq=3542 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.4 sysload=0.23 cputime=97.183 memavail=641168 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.823
Stats 2428.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=50551 bytes_read=154899 bytes_retransmit=0 bytes_invalid=0 send_seq=3547 receive_seq=3547 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.23 cputime=97.219 memavail=640168 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.452
Stats 2429.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=50596 bytes_read=155122 bytes_retransmit=0 bytes_invalid=0 send_seq=3550 receive_seq=3550 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.23 cputime=97.254 memavail=639468 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.611
Stats 2430.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=50662 bytes_read=155326 bytes_retransmit=0 bytes_invalid=0 send_seq=3555 receive_seq=3555 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.0 sysload=0.21 cputime=97.284 memavail=639468 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.609
Stats 2431.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=50723 bytes_read=155555 bytes_retransmit=0 bytes_invalid=0 send_seq=3559 receive_seq=3559 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.21 cputime=97.318 memavail=640184 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.781
Stats 2432.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50821 bytes_read=155797 bytes_retransmit=0 bytes_invalid=0 send_seq=3566 receive_seq=3566 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.21 cputime=97.349 memavail=637640 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.565
Stats 2433.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50909 bytes_read=156022 bytes_retransmit=0 bytes_invalid=0 send_seq=3573 receive_seq=3573 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.6 sysload=0.21 cputime=97.383 memavail=640404 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.591
Stats 2434.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=50943 bytes_read=156246 bytes_retransmit=0 bytes_invalid=0 send_seq=3576 receive_seq=3576 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.0 sysload=0.21 cputime=97.414 memavail=639956 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.591
Stats 2435.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51009 bytes_read=156464 bytes_retransmit=0 bytes_invalid=0 send_seq=3581 receive_seq=3581 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.19 cputime=97.448 memavail=639704 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.573
Stats 2436.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51075 bytes_read=156668 bytes_retransmit=0 bytes_invalid=0 send_seq=3586 receive_seq=3586 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.2 sysload=0.19 cputime=97.482 memavail=641680 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.456
Stats 2437.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=51141 bytes_read=156916 bytes_retransmit=0 bytes_invalid=0 send_seq=3591 receive_seq=3591 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.19 cputime=97.511 memavail=640976 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.752
Stats 2438.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=51239 bytes_read=157144 bytes_retransmit=0 bytes_invalid=0 send_seq=3598 receive_seq=3598 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.19 cputime=97.546 memavail=641152 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.635
Stats 2439.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=51321 bytes_read=157353 bytes_retransmit=0 bytes_invalid=0 send_seq=3604 receive_seq=3604 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.2 sysload=0.19 cputime=97.578 memavail=641148 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.583
Stats 2440.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=51403 bytes_read=157592 bytes_retransmit=0 bytes_invalid=0 send_seq=3610 receive_seq=3610 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.17 cputime=97.614 memavail=640924 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.713
Stats 2441.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=51501 bytes_read=157820 bytes_retransmit=0 bytes_invalid=0 send_seq=3617 receive_seq=3617 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.8 sysload=0.17 cputime=97.650 memavail=641820 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.620
Stats 2442.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51546 bytes_read=158028 bytes_retransmit=0 bytes_invalid=0 send_seq=3620 receive_seq=3620 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.17 cputime=97.689 memavail=639664 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.397
Stats 2443.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51628 bytes_read=158267 bytes_retransmit=0 bytes_invalid=0 send_seq=3626 receive_seq=3626 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.17 cputime=97.733 memavail=639204 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.565
Stats 2444.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51710 bytes_read=158490 bytes_retransmit=0 bytes_invalid=0 send_seq=3632 receive_seq=3632 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.1 sysload=0.17 cputime=97.767 memavail=638980 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.707
Stats 2445.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51776 bytes_read=158694 bytes_retransmit=0 bytes_invalid=0 send_seq=3637 receive_seq=3637 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=27.2 sysload=0.16 cputime=97.801 memavail=638756 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.603
Stats 2446.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=51842 bytes_read=158928 bytes_retransmit=0 bytes_invalid=0 send_seq=3642 receive_seq=3642 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.16 cputime=97.836 memavail=641436 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.595
Stats 2447.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=51924 bytes_read=159165 bytes_retransmit=0 bytes_invalid=0 send_seq=3648 receive_seq=3648 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.16 cputime=97.864 memavail=639424 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.480
Stats 2448.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=52006 bytes_read=159374 bytes_retransmit=0 bytes_invalid=0 send_seq=3654 receive_seq=3654 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.16 cputime=97.899 memavail=639424 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.642
Stats 2449.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=52083 bytes_read=159608 bytes_retransmit=0 bytes_invalid=0 send_seq=3659 receive_seq=3659 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=97.933 memavail=640152 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.682
Stats 2450.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=52165 bytes_read=159831 bytes_retransmit=0 bytes_invalid=0 send_seq=3665 receive_seq=3665 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.6 sysload=0.15 cputime=97.968 memavail=639480 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.619
Stats 2451.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=52231 bytes_read=160035 bytes_retransmit=0 bytes_invalid=0 send_seq=3670 receive_seq=3670 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.15 cputime=98.002 memavail=641908 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.553
Stats 2452.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=52297 bytes_read=160283 bytes_retransmit=0 bytes_invalid=0 send_seq=3675 receive_seq=3675 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.7 sysload=0.15 cputime=98.027 memavail=638512 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.679
Stats 2453.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=52395 bytes_read=160511 bytes_retransmit=0 bytes_invalid=0 send_seq=3682 receive_seq=3682 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.15 cputime=98.058 memavail=637816 print_time=630.152 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.821
Stats 2454.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=53023 bytes_read=160760 bytes_retransmit=0 bytes_invalid=0 send_seq=3696 receive_seq=3696 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=312 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.15 cputime=98.137 memavail=637592 print_time=763.196 buffer_time=49.656 print_stall=0 extruder: target=210 temp=210.0 pwm=0.654
Stats 2455.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=53097 bytes_read=161008 bytes_retransmit=0 bytes_invalid=0 send_seq=3701 receive_seq=3701 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=296 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=31.8 sysload=0.14 cputime=98.171 memavail=637592 print_time=763.196 buffer_time=48.655 print_stall=0 extruder: target=210 temp=210.3 pwm=0.486
Stats 2456.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=53214 bytes_read=161207 bytes_retransmit=0 bytes_invalid=0 send_seq=3707 receive_seq=3707 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=280 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.14 cputime=98.207 memavail=641852 print_time=763.196 buffer_time=47.654 print_stall=0 extruder: target=210 temp=209.7 pwm=0.772
Stats 2457.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=53272 bytes_read=161411 bytes_retransmit=0 bytes_invalid=0 send_seq=3711 receive_seq=3711 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=264 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.14 cputime=98.246 memavail=640928 print_time=763.196 buffer_time=46.653 print_stall=0 extruder: target=210 temp=210.1 pwm=0.547
Stats 2458.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=53370 bytes_read=161651 bytes_retransmit=0 bytes_invalid=0 send_seq=3717 receive_seq=3717 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=19 upcoming_bytes=248 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.14 cputime=98.289 memavail=639000 print_time=763.196 buffer_time=45.653 print_stall=0 extruder: target=210 temp=210.0 pwm=0.567
Stats 2459.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=53452 bytes_read=161848 bytes_retransmit=0 bytes_invalid=0 send_seq=3722 receive_seq=3722 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=232 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=33.0 sysload=0.14 cputime=98.327 memavail=638776 print_time=763.196 buffer_time=44.651 print_stall=0 extruder: target=210 temp=209.8 pwm=0.768
Stats 2460.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=53553 bytes_read=162052 bytes_retransmit=0 bytes_invalid=0 send_seq=3727 receive_seq=3727 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=216 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=98.364 memavail=640084 print_time=763.196 buffer_time=43.651 print_stall=0 extruder: target=210 temp=210.0 pwm=0.520
Stats 2461.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000023 mcu_task_stddev=0.000016 bytes_write=53643 bytes_read=162305 bytes_retransmit=0 bytes_invalid=0 send_seq=3733 receive_seq=3733 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=200 freq=72002697  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.12 cputime=98.406 memavail=641072 print_time=763.196 buffer_time=42.650 print_stall=0 extruder: target=210 temp=209.8 pwm=0.609
Stats 2462.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=53749 bytes_read=162528 bytes_retransmit=0 bytes_invalid=0 send_seq=3739 receive_seq=3739 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=184 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.12 cputime=98.435 memavail=637476 print_time=763.196 buffer_time=41.649 print_stall=0 extruder: target=210 temp=209.9 pwm=0.551
Stats 2463.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=53826 bytes_read=162727 bytes_retransmit=0 bytes_invalid=0 send_seq=3743 receive_seq=3743 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=168 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=31.2 sysload=0.12 cputime=98.475 memavail=636776 print_time=763.196 buffer_time=40.648 print_stall=0 extruder: target=210 temp=210.2 pwm=0.428
Stats 2464.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=53916 bytes_read=162980 bytes_retransmit=0 bytes_invalid=0 send_seq=3749 receive_seq=3749 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=152 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.12 cputime=98.513 memavail=639132 print_time=763.196 buffer_time=39.647 print_stall=0 extruder: target=210 temp=209.7 pwm=0.690
Stats 2465.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=53966 bytes_read=163174 bytes_retransmit=0 bytes_invalid=0 send_seq=3752 receive_seq=3752 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=136 freq=72002694  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=98.547 memavail=637900 print_time=763.196 buffer_time=38.646 print_stall=0 extruder: target=210 temp=209.6 pwm=0.690
Stats 2466.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54043 bytes_read=163373 bytes_retransmit=0 bytes_invalid=0 send_seq=3756 receive_seq=3756 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=120 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.11 cputime=98.580 memavail=641724 print_time=763.196 buffer_time=37.645 print_stall=0 extruder: target=210 temp=209.4 pwm=0.774
Stats 2467.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54125 bytes_read=163635 bytes_retransmit=0 bytes_invalid=0 send_seq=3761 receive_seq=3761 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=104 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.11 cputime=98.608 memavail=640948 print_time=763.196 buffer_time=36.644 print_stall=0 extruder: target=210 temp=209.4 pwm=0.746
Stats 2468.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54223 bytes_read=163844 bytes_retransmit=0 bytes_invalid=0 send_seq=3767 receive_seq=3767 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=88 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=30.7 sysload=0.11 cputime=98.643 memavail=640500 print_time=763.196 buffer_time=35.644 print_stall=0 extruder: target=210 temp=209.4 pwm=0.707
Stats 2469.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54316 bytes_read=164048 bytes_retransmit=0 bytes_invalid=0 send_seq=3772 receive_seq=3772 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=72 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.11 cputime=98.679 memavail=640052 print_time=763.196 buffer_time=34.643 print_stall=0 extruder: target=210 temp=209.3 pwm=0.773
Stats 2470.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54414 bytes_read=164301 bytes_retransmit=0 bytes_invalid=0 send_seq=3778 receive_seq=3778 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=56 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.10 cputime=98.720 memavail=639828 print_time=763.196 buffer_time=33.642 print_stall=0 extruder: target=210 temp=209.6 pwm=0.657
Stats 2471.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54512 bytes_read=164510 bytes_retransmit=0 bytes_invalid=0 send_seq=3784 receive_seq=3784 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=40 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.10 cputime=98.761 memavail=641540 print_time=763.196 buffer_time=32.641 print_stall=0 extruder: target=210 temp=209.6 pwm=0.716
Stats 2472.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54605 bytes_read=164728 bytes_retransmit=0 bytes_invalid=0 send_seq=3789 receive_seq=3789 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=8 upcoming_bytes=24 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=23.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.10 cputime=98.790 memavail=639360 print_time=763.196 buffer_time=31.640 print_stall=0 extruder: target=210 temp=209.5 pwm=0.700
Stats 2473.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54687 bytes_read=164976 bytes_retransmit=0 bytes_invalid=0 send_seq=3794 receive_seq=3794 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=19 upcoming_bytes=8 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.10 cputime=98.828 memavail=641324 print_time=763.196 buffer_time=30.639 print_stall=0 extruder: target=210 temp=209.3 pwm=0.807
Stats 2474.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54785 bytes_read=165185 bytes_retransmit=0 bytes_invalid=0 send_seq=3800 receive_seq=3800 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=33.5 sysload=0.10 cputime=98.870 memavail=641100 print_time=763.196 buffer_time=29.638 print_stall=0 extruder: target=210 temp=209.7 pwm=0.552
Stats 2475.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54862 bytes_read=165389 bytes_retransmit=0 bytes_invalid=0 send_seq=3805 receive_seq=3805 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.10 cputime=98.906 memavail=640176 print_time=763.196 buffer_time=28.638 print_stall=0 extruder: target=210 temp=209.4 pwm=0.811
Stats 2476.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=54944 bytes_read=165642 bytes_retransmit=0 bytes_invalid=0 send_seq=3811 receive_seq=3811 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.2 sysload=0.10 cputime=98.943 memavail=641740 print_time=763.196 buffer_time=27.637 print_stall=0 extruder: target=210 temp=209.7 pwm=0.615
Stats 2477.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55026 bytes_read=165865 bytes_retransmit=0 bytes_invalid=0 send_seq=3817 receive_seq=3817 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.10 cputime=98.971 memavail=641560 print_time=763.196 buffer_time=26.636 print_stall=0 extruder: target=210 temp=209.9 pwm=0.556
Stats 2478.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55092 bytes_read=166069 bytes_retransmit=0 bytes_invalid=0 send_seq=3822 receive_seq=3822 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.10 cputime=99.004 memavail=640892 print_time=763.196 buffer_time=25.636 print_stall=0 extruder: target=210 temp=209.7 pwm=0.677
Stats 2479.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55158 bytes_read=166317 bytes_retransmit=0 bytes_invalid=0 send_seq=3827 receive_seq=3827 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.10 cputime=99.038 memavail=640640 print_time=763.196 buffer_time=24.634 print_stall=0 extruder: target=210 temp=209.5 pwm=0.763
Stats 2480.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55256 bytes_read=166531 bytes_retransmit=0 bytes_invalid=0 send_seq=3834 receive_seq=3834 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=28.8 sysload=0.09 cputime=99.071 memavail=640640 print_time=763.196 buffer_time=23.633 print_stall=0 extruder: target=210 temp=209.8 pwm=0.584
Stats 2481.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55317 bytes_read=166745 bytes_retransmit=0 bytes_invalid=0 send_seq=3838 receive_seq=3838 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=26.8 sysload=0.09 cputime=99.103 memavail=641320 print_time=763.196 buffer_time=22.632 print_stall=0 extruder: target=210 temp=209.8 pwm=0.644
Stats 2482.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55399 bytes_read=166997 bytes_retransmit=0 bytes_invalid=0 send_seq=3844 receive_seq=3844 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.09 cputime=99.131 memavail=639392 print_time=763.196 buffer_time=21.631 print_stall=0 extruder: target=210 temp=209.8 pwm=0.639
Stats 2483.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55465 bytes_read=167201 bytes_retransmit=0 bytes_invalid=0 send_seq=3849 receive_seq=3849 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.09 cputime=99.162 memavail=638948 print_time=763.196 buffer_time=20.631 print_stall=0 extruder: target=210 temp=209.7 pwm=0.770
Stats 2484.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55542 bytes_read=167420 bytes_retransmit=0 bytes_invalid=0 send_seq=3854 receive_seq=3854 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.0 sysload=0.09 cputime=99.196 memavail=640748 print_time=763.196 buffer_time=19.630 print_stall=0 extruder: target=210 temp=209.8 pwm=0.738
Stats 2485.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55592 bytes_read=167648 bytes_retransmit=0 bytes_invalid=0 send_seq=3858 receive_seq=3858 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.08 cputime=99.232 memavail=640048 print_time=763.196 buffer_time=18.630 print_stall=0 extruder: target=210 temp=210.0 pwm=0.534
Stats 2486.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55690 bytes_read=167862 bytes_retransmit=0 bytes_invalid=0 send_seq=3865 receive_seq=3865 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.08 cputime=99.267 memavail=641340 print_time=763.196 buffer_time=17.629 print_stall=0 extruder: target=210 temp=210.1 pwm=0.528
Stats 2487.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55740 bytes_read=168090 bytes_retransmit=0 bytes_invalid=0 send_seq=3869 receive_seq=3869 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.08 cputime=99.296 memavail=641080 print_time=763.196 buffer_time=16.628 print_stall=0 extruder: target=210 temp=209.9 pwm=0.680
Stats 2488.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55774 bytes_read=168313 bytes_retransmit=0 bytes_invalid=0 send_seq=3872 receive_seq=3872 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.08 cputime=99.332 memavail=641080 print_time=763.196 buffer_time=15.627 print_stall=0 extruder: target=210 temp=210.0 pwm=0.611
Stats 2489.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55840 bytes_read=168517 bytes_retransmit=0 bytes_invalid=0 send_seq=3877 receive_seq=3877 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.08 cputime=99.367 memavail=641080 print_time=763.196 buffer_time=14.626 print_stall=0 extruder: target=210 temp=209.8 pwm=0.734
Stats 2490.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55917 bytes_read=168736 bytes_retransmit=0 bytes_invalid=0 send_seq=3882 receive_seq=3882 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.07 cputime=99.404 memavail=641080 print_time=763.196 buffer_time=13.625 print_stall=0 extruder: target=210 temp=209.8 pwm=0.677
Stats 2491.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=55999 bytes_read=168974 bytes_retransmit=0 bytes_invalid=0 send_seq=3888 receive_seq=3888 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.7 sysload=0.07 cputime=99.441 memavail=641848 print_time=763.196 buffer_time=12.625 print_stall=0 extruder: target=210 temp=209.9 pwm=0.646
Stats 2492.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=56065 bytes_read=169192 bytes_retransmit=0 bytes_invalid=0 send_seq=3893 receive_seq=3893 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.07 cputime=99.469 memavail=639884 print_time=763.196 buffer_time=11.624 print_stall=0 extruder: target=210 temp=210.3 pwm=0.434
Stats 2493.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=56121 bytes_read=169406 bytes_retransmit=0 bytes_invalid=0 send_seq=3898 receive_seq=3897 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.8 sysload=0.07 cputime=99.503 memavail=641356 print_time=763.196 buffer_time=10.623 print_stall=0 extruder: target=210 temp=209.8 pwm=0.793
Stats 2494.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=56187 bytes_read=169655 bytes_retransmit=0 bytes_invalid=0 send_seq=3903 receive_seq=3903 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.0 sysload=0.07 cputime=99.540 memavail=641356 print_time=763.196 buffer_time=9.623 print_stall=0 extruder: target=210 temp=209.9 pwm=0.708
Stats 2495.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=56253 bytes_read=169859 bytes_retransmit=0 bytes_invalid=0 send_seq=3908 receive_seq=3908 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.8 sysload=0.07 cputime=99.574 memavail=641356 print_time=763.196 buffer_time=8.622 print_stall=0 extruder: target=210 temp=209.9 pwm=0.706
Stats 2496.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=56287 bytes_read=170068 bytes_retransmit=0 bytes_invalid=0 send_seq=3911 receive_seq=3911 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.07 cputime=99.608 memavail=641836 print_time=763.196 buffer_time=7.621 print_stall=0 extruder: target=210 temp=209.9 pwm=0.706
Stats 2497.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56369 bytes_read=170320 bytes_retransmit=0 bytes_invalid=0 send_seq=3917 receive_seq=3917 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.07 cputime=99.638 memavail=641360 print_time=763.196 buffer_time=6.621 print_stall=0 extruder: target=210 temp=210.1 pwm=0.548
Stats 2498.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56435 bytes_read=170524 bytes_retransmit=0 bytes_invalid=0 send_seq=3922 receive_seq=3922 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.07 cputime=99.671 memavail=641360 print_time=763.196 buffer_time=5.620 print_stall=0 extruder: target=210 temp=209.9 pwm=0.707
Stats 2499.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56512 bytes_read=170743 bytes_retransmit=0 bytes_invalid=0 send_seq=3927 receive_seq=3927 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=32.9 sysload=0.07 cputime=99.706 memavail=641188 print_time=763.196 buffer_time=4.619 print_stall=0 extruder: target=210 temp=209.8 pwm=0.722
Stats 2500.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56562 bytes_read=170971 bytes_retransmit=0 bytes_invalid=0 send_seq=3931 receive_seq=3931 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.5 sysload=0.06 cputime=99.742 memavail=641188 print_time=763.196 buffer_time=3.619 print_stall=0 extruder: target=210 temp=210.0 pwm=0.586
Stats 2501.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56607 bytes_read=171165 bytes_retransmit=0 bytes_invalid=0 send_seq=3934 receive_seq=3934 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.06 cputime=99.776 memavail=641896 print_time=763.196 buffer_time=2.618 print_stall=0 extruder: target=210 temp=210.0 pwm=0.643
Stats 2502.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56684 bytes_read=171398 bytes_retransmit=0 bytes_invalid=0 send_seq=3939 receive_seq=3939 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.06 cputime=99.814 memavail=639228 print_time=763.196 buffer_time=1.617 print_stall=0 extruder: target=210 temp=210.2 pwm=0.498
Stats 2503.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56734 bytes_read=171626 bytes_retransmit=0 bytes_invalid=0 send_seq=3943 receive_seq=3943 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=32.0 sysload=0.06 cputime=99.854 memavail=639896 print_time=763.196 buffer_time=0.615 print_stall=0 extruder: target=210 temp=210.0 pwm=0.760
Stats 2504.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56836 bytes_read=171840 bytes_retransmit=0 bytes_invalid=0 send_seq=3950 receive_seq=3950 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.06 cputime=99.891 memavail=639912 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.689
Stats 2505.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56897 bytes_read=172054 bytes_retransmit=0 bytes_invalid=0 send_seq=3954 receive_seq=3954 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.06 cputime=99.926 memavail=639912 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.800
Stats 2506.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=56963 bytes_read=172287 bytes_retransmit=0 bytes_invalid=0 send_seq=3959 receive_seq=3959 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.06 cputime=99.960 memavail=641232 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.913
Stats 2507.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57061 bytes_read=172515 bytes_retransmit=0 bytes_invalid=0 send_seq=3966 receive_seq=3966 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.06 cputime=99.989 memavail=639208 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.692
Stats 2508.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57111 bytes_read=172729 bytes_retransmit=0 bytes_invalid=0 send_seq=3970 receive_seq=3970 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=32.0 sysload=0.06 cputime=100.022 memavail=638984 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.629
Stats 2509.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57177 bytes_read=172962 bytes_retransmit=0 bytes_invalid=0 send_seq=3975 receive_seq=3975 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.6 sysload=0.06 cputime=100.055 memavail=640780 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.590
Stats 2510.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57275 bytes_read=173176 bytes_retransmit=0 bytes_invalid=0 send_seq=3982 receive_seq=3982 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.8 sysload=0.05 cputime=100.089 memavail=640556 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.475
Stats 2511.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57325 bytes_read=173390 bytes_retransmit=0 bytes_invalid=0 send_seq=3986 receive_seq=3986 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.05 cputime=100.121 memavail=641808 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.579
Stats 2512.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57402 bytes_read=173637 bytes_retransmit=0 bytes_invalid=0 send_seq=3991 receive_seq=3991 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.05 cputime=100.148 memavail=639612 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.684
Stats 2513.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57500 bytes_read=173851 bytes_retransmit=0 bytes_invalid=0 send_seq=3998 receive_seq=3998 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.2 sysload=0.05 cputime=100.182 memavail=639360 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.312
Stats 2514.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57566 bytes_read=174070 bytes_retransmit=0 bytes_invalid=0 send_seq=4003 receive_seq=4003 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.05 cputime=100.215 memavail=639360 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.628
Stats 2515.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57648 bytes_read=174305 bytes_retransmit=0 bytes_invalid=0 send_seq=4009 receive_seq=4009 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.2 sysload=0.05 cputime=100.249 memavail=639360 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.678
Stats 2516.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57714 bytes_read=174499 bytes_retransmit=0 bytes_invalid=0 send_seq=4014 receive_seq=4014 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.05 cputime=100.282 memavail=641656 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.443
Stats 2517.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57775 bytes_read=174716 bytes_retransmit=0 bytes_invalid=0 send_seq=4018 receive_seq=4018 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=31.4 sysload=0.05 cputime=100.310 memavail=641176 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.682
Stats 2518.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57857 bytes_read=174942 bytes_retransmit=0 bytes_invalid=0 send_seq=4024 receive_seq=4024 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.05 cputime=100.346 memavail=640924 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.754
Stats 2519.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=57950 bytes_read=175147 bytes_retransmit=0 bytes_invalid=0 send_seq=4030 receive_seq=4030 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.05 cputime=100.377 memavail=641400 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.538
Stats 2520.2: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58027 bytes_read=175366 bytes_retransmit=0 bytes_invalid=0 send_seq=4035 receive_seq=4035 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.2 sysload=0.04 cputime=100.411 memavail=641828 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.630
Stats 2521.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58125 bytes_read=175604 bytes_retransmit=0 bytes_invalid=0 send_seq=4042 receive_seq=4041 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.4 sysload=0.04 cputime=100.444 memavail=641828 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.685
Stats 2522.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58207 bytes_read=175832 bytes_retransmit=0 bytes_invalid=0 send_seq=4048 receive_seq=4048 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.9 sysload=0.04 cputime=100.472 memavail=639632 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.595
Stats 2523.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58257 bytes_read=176046 bytes_retransmit=0 bytes_invalid=0 send_seq=4052 receive_seq=4052 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.04 cputime=100.508 memavail=639408 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.721
Stats 2524.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58339 bytes_read=176284 bytes_retransmit=0 bytes_invalid=0 send_seq=4058 receive_seq=4058 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.04 cputime=100.543 memavail=638904 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.565
Stats 2525.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58389 bytes_read=176483 bytes_retransmit=0 bytes_invalid=0 send_seq=4062 receive_seq=4062 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.4 sysload=0.04 cputime=100.575 memavail=638904 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.683
Stats 2526.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58461 bytes_read=176697 bytes_retransmit=0 bytes_invalid=0 send_seq=4066 receive_seq=4066 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.5 sysload=0.04 cputime=100.609 memavail=641836 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.598
Stats 2527.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58511 bytes_read=176939 bytes_retransmit=0 bytes_invalid=0 send_seq=4070 receive_seq=4070 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.04 cputime=100.636 memavail=641580 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.655
Stats 2528.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58577 bytes_read=177143 bytes_retransmit=0 bytes_invalid=0 send_seq=4075 receive_seq=4075 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.04 cputime=100.670 memavail=641356 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.660
Stats 2529.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58622 bytes_read=177352 bytes_retransmit=0 bytes_invalid=0 send_seq=4078 receive_seq=4078 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.2 sysload=0.04 cputime=100.703 memavail=641104 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.461
Stats 2530.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58688 bytes_read=177585 bytes_retransmit=0 bytes_invalid=0 send_seq=4083 receive_seq=4083 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.2 sysload=0.04 cputime=100.738 memavail=641104 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.555
Stats 2531.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58770 bytes_read=177794 bytes_retransmit=0 bytes_invalid=0 send_seq=4089 receive_seq=4089 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.7 sysload=0.04 cputime=100.772 memavail=641824 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.477
Stats 2532.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58847 bytes_read=178027 bytes_retransmit=0 bytes_invalid=0 send_seq=4094 receive_seq=4094 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.2 sysload=0.04 cputime=100.801 memavail=639904 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.652
Stats 2533.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=58940 bytes_read=178265 bytes_retransmit=0 bytes_invalid=0 send_seq=4100 receive_seq=4100 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.8 sysload=0.04 cputime=100.837 memavail=641160 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.613
Stats 2534.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59022 bytes_read=178474 bytes_retransmit=0 bytes_invalid=0 send_seq=4106 receive_seq=4106 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.6 sysload=0.04 cputime=100.872 memavail=640908 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.494
Stats 2535.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59083 bytes_read=178703 bytes_retransmit=0 bytes_invalid=0 send_seq=4110 receive_seq=4110 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.03 cputime=100.907 memavail=641684 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.612
Stats 2536.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59165 bytes_read=178926 bytes_retransmit=0 bytes_invalid=0 send_seq=4116 receive_seq=4116 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.7 sysload=0.03 cputime=100.942 memavail=641664 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.567
Stats 2537.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=59215 bytes_read=179139 bytes_retransmit=0 bytes_invalid=0 send_seq=4120 receive_seq=4120 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=32.0 sysload=0.03 cputime=100.970 memavail=641184 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.729
Stats 2538.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=59297 bytes_read=179378 bytes_retransmit=0 bytes_invalid=0 send_seq=4126 receive_seq=4126 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.8 sysload=0.03 cputime=101.005 memavail=641372 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.738
Stats 2539.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=59363 bytes_read=179596 bytes_retransmit=0 bytes_invalid=0 send_seq=4131 receive_seq=4131 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.03 cputime=101.039 memavail=641120 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.489
Stats 2540.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=59440 bytes_read=179800 bytes_retransmit=0 bytes_invalid=0 send_seq=4136 receive_seq=4136 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.03 cputime=101.074 memavail=641120 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.628
Stats 2541.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=59522 bytes_read=180039 bytes_retransmit=0 bytes_invalid=0 send_seq=4142 receive_seq=4142 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.03 cputime=101.109 memavail=641832 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.740
Stats 2542.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59604 bytes_read=180276 bytes_retransmit=0 bytes_invalid=0 send_seq=4148 receive_seq=4148 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.03 cputime=101.141 memavail=639824 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.575
Stats 2543.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59670 bytes_read=180480 bytes_retransmit=0 bytes_invalid=0 send_seq=4153 receive_seq=4153 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.03 cputime=101.177 memavail=641044 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.580
Stats 2544.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59704 bytes_read=180704 bytes_retransmit=0 bytes_invalid=0 send_seq=4156 receive_seq=4156 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.03 cputime=101.210 memavail=640792 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.580
Stats 2545.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59802 bytes_read=180932 bytes_retransmit=0 bytes_invalid=0 send_seq=4163 receive_seq=4163 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.03 cputime=101.245 memavail=640792 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.760
Stats 2546.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59884 bytes_read=181141 bytes_retransmit=0 bytes_invalid=0 send_seq=4169 receive_seq=4169 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.03 cputime=101.278 memavail=641816 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.573
Stats 2547.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=59961 bytes_read=181389 bytes_retransmit=0 bytes_invalid=0 send_seq=4174 receive_seq=4174 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.03 cputime=101.306 memavail=641060 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.664
Stats 2548.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=60027 bytes_read=181607 bytes_retransmit=0 bytes_invalid=0 send_seq=4179 receive_seq=4179 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=32.1 sysload=0.03 cputime=101.341 memavail=641388 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.764
Stats 2549.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=60093 bytes_read=181811 bytes_retransmit=0 bytes_invalid=0 send_seq=4184 receive_seq=4184 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=32.1 sysload=0.03 cputime=101.374 memavail=641388 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.678
Stats 2550.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=60175 bytes_read=182050 bytes_retransmit=0 bytes_invalid=0 send_seq=4190 receive_seq=4190 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.02 cputime=101.409 memavail=641164 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.521
Stats 2551.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=60241 bytes_read=182268 bytes_retransmit=0 bytes_invalid=0 send_seq=4195 receive_seq=4195 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.02 cputime=101.440 memavail=641672 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.550
Stats 2552.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60307 bytes_read=182486 bytes_retransmit=0 bytes_invalid=0 send_seq=4200 receive_seq=4200 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.4 sysload=0.02 cputime=101.464 memavail=638956 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.676
Stats 2553.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60373 bytes_read=182720 bytes_retransmit=0 bytes_invalid=0 send_seq=4205 receive_seq=4205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.02 cputime=101.499 memavail=641408 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.543
Stats 2554.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60455 bytes_read=182943 bytes_retransmit=0 bytes_invalid=0 send_seq=4211 receive_seq=4211 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.02 cputime=101.534 memavail=641132 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.525
Stats 2555.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60527 bytes_read=183163 bytes_retransmit=0 bytes_invalid=0 send_seq=4217 receive_seq=4217 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.02 cputime=101.568 memavail=640880 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.569
Stats 2556.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60593 bytes_read=183397 bytes_retransmit=0 bytes_invalid=0 send_seq=4222 receive_seq=4222 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.5 sysload=0.02 cputime=101.600 memavail=641848 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.630
Stats 2557.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60670 bytes_read=183629 bytes_retransmit=0 bytes_invalid=0 send_seq=4227 receive_seq=4227 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.02 cputime=101.629 memavail=641592 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.594
Stats 2558.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60752 bytes_read=183838 bytes_retransmit=0 bytes_invalid=0 send_seq=4233 receive_seq=4233 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.02 cputime=101.667 memavail=641368 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.652
Stats 2559.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60818 bytes_read=184072 bytes_retransmit=0 bytes_invalid=0 send_seq=4238 receive_seq=4238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.02 cputime=101.703 memavail=641592 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.634
Stats 2560.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60900 bytes_read=184295 bytes_retransmit=0 bytes_invalid=0 send_seq=4244 receive_seq=4244 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.4 sysload=0.02 cputime=101.740 memavail=641368 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.598
Stats 2561.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=60982 bytes_read=184504 bytes_retransmit=0 bytes_invalid=0 send_seq=4250 receive_seq=4250 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.4 sysload=0.02 cputime=101.778 memavail=641860 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.667
Stats 2562.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61048 bytes_read=184752 bytes_retransmit=0 bytes_invalid=0 send_seq=4255 receive_seq=4255 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=32.4 sysload=0.02 cputime=101.809 memavail=641108 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.820
Stats 2563.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61130 bytes_read=184975 bytes_retransmit=0 bytes_invalid=0 send_seq=4261 receive_seq=4261 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.02 cputime=101.852 memavail=639668 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.598
Stats 2564.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61196 bytes_read=185179 bytes_retransmit=0 bytes_invalid=0 send_seq=4266 receive_seq=4266 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.02 cputime=101.890 memavail=639668 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.575
Stats 2565.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61246 bytes_read=185408 bytes_retransmit=0 bytes_invalid=0 send_seq=4270 receive_seq=4270 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=32.0 sysload=0.02 cputime=101.927 memavail=639668 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.633
Stats 2566.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61328 bytes_read=185631 bytes_retransmit=0 bytes_invalid=0 send_seq=4276 receive_seq=4276 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.02 cputime=101.961 memavail=641912 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.747
Stats 2567.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61410 bytes_read=185854 bytes_retransmit=0 bytes_invalid=0 send_seq=4282 receive_seq=4282 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.02 cputime=101.992 memavail=641684 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.471
Stats 2568.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61492 bytes_read=186093 bytes_retransmit=0 bytes_invalid=0 send_seq=4288 receive_seq=4288 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.4 sysload=0.02 cputime=102.029 memavail=641420 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.699
Stats 2569.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61558 bytes_read=186311 bytes_retransmit=0 bytes_invalid=0 send_seq=4293 receive_seq=4293 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.02 cputime=102.062 memavail=641196 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.678
Stats 2570.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61640 bytes_read=186520 bytes_retransmit=0 bytes_invalid=0 send_seq=4299 receive_seq=4299 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.02 cputime=102.097 memavail=640972 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.515
Stats 2571.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61701 bytes_read=186749 bytes_retransmit=0 bytes_invalid=0 send_seq=4303 receive_seq=4303 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=32.6 sysload=0.02 cputime=102.130 memavail=641828 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.692
Stats 2572.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61783 bytes_read=186986 bytes_retransmit=0 bytes_invalid=0 send_seq=4309 receive_seq=4309 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.4 sysload=0.02 cputime=102.157 memavail=638460 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.708
Stats 2573.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61849 bytes_read=187190 bytes_retransmit=0 bytes_invalid=0 send_seq=4314 receive_seq=4314 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.9 sysload=0.02 cputime=102.198 memavail=641832 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.695
Stats 2574.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61899 bytes_read=187419 bytes_retransmit=0 bytes_invalid=0 send_seq=4318 receive_seq=4318 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.02 cputime=102.236 memavail=640332 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.779
Stats 2575.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=61997 bytes_read=187639 bytes_retransmit=0 bytes_invalid=0 send_seq=4325 receive_seq=4325 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.02 cputime=102.271 memavail=639856 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.632
Stats 2576.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62058 bytes_read=187827 bytes_retransmit=0 bytes_invalid=0 send_seq=4329 receive_seq=4329 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.02 cputime=102.300 memavail=641180 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.489
Stats 2577.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=62108 bytes_read=188058 bytes_retransmit=0 bytes_invalid=0 send_seq=4333 receive_seq=4333 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.5 sysload=0.02 cputime=102.328 memavail=641020 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.801
Stats 2578.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=62185 bytes_read=188265 bytes_retransmit=0 bytes_invalid=0 send_seq=4338 receive_seq=4338 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=31.2 sysload=0.02 cputime=102.364 memavail=638288 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.539
Stats 2579.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=62246 bytes_read=188464 bytes_retransmit=0 bytes_invalid=0 send_seq=4342 receive_seq=4342 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.02 cputime=102.399 memavail=638288 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.449
Stats 2580.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=62328 bytes_read=188703 bytes_retransmit=0 bytes_invalid=0 send_seq=4348 receive_seq=4348 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.01 cputime=102.435 memavail=641060 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.557
Stats 2581.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=62426 bytes_read=188931 bytes_retransmit=0 bytes_invalid=0 send_seq=4355 receive_seq=4355 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.9 sysload=0.01 cputime=102.466 memavail=641224 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.490
Stats 2582.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62487 bytes_read=189144 bytes_retransmit=0 bytes_invalid=0 send_seq=4359 receive_seq=4359 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.4 sysload=0.01 cputime=102.495 memavail=639784 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.530
Stats 2583.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62569 bytes_read=189397 bytes_retransmit=0 bytes_invalid=0 send_seq=4365 receive_seq=4365 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.3 sysload=0.01 cputime=102.532 memavail=641180 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.554
Stats 2584.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62651 bytes_read=189606 bytes_retransmit=0 bytes_invalid=0 send_seq=4371 receive_seq=4371 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.7 sysload=0.01 cputime=102.566 memavail=640704 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.616
Stats 2585.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62707 bytes_read=189800 bytes_retransmit=0 bytes_invalid=0 send_seq=4374 receive_seq=4374 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.01 cputime=102.598 memavail=640716 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.668
Stats 2586.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62789 bytes_read=190053 bytes_retransmit=0 bytes_invalid=0 send_seq=4380 receive_seq=4380 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.5 sysload=0.01 cputime=102.632 memavail=641652 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.582
Stats 2587.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62871 bytes_read=190276 bytes_retransmit=0 bytes_invalid=0 send_seq=4386 receive_seq=4386 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.01 cputime=102.657 memavail=640920 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.556
Stats 2588.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62921 bytes_read=190475 bytes_retransmit=0 bytes_invalid=0 send_seq=4390 receive_seq=4390 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.3 sysload=0.01 cputime=102.691 memavail=641644 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.626
Stats 2589.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=62971 bytes_read=190718 bytes_retransmit=0 bytes_invalid=0 send_seq=4394 receive_seq=4394 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.7 sysload=0.01 cputime=102.727 memavail=641168 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.397
Stats 2590.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63053 bytes_read=190927 bytes_retransmit=0 bytes_invalid=0 send_seq=4400 receive_seq=4400 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.01 cputime=102.762 memavail=640664 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.677
Stats 2591.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63103 bytes_read=191126 bytes_retransmit=0 bytes_invalid=0 send_seq=4404 receive_seq=4404 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.01 cputime=102.791 memavail=641660 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.610
Stats 2592.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63180 bytes_read=191388 bytes_retransmit=0 bytes_invalid=0 send_seq=4409 receive_seq=4409 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.01 cputime=102.821 memavail=641340 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.734
Stats 2593.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63278 bytes_read=191602 bytes_retransmit=0 bytes_invalid=0 send_seq=4416 receive_seq=4416 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.3 sysload=0.01 cputime=102.857 memavail=639376 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.578
Stats 2594.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63339 bytes_read=191801 bytes_retransmit=0 bytes_invalid=0 send_seq=4420 receive_seq=4420 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.5 sysload=0.01 cputime=102.892 memavail=641344 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.600
Stats 2595.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63405 bytes_read=192049 bytes_retransmit=0 bytes_invalid=0 send_seq=4425 receive_seq=4425 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.01 cputime=102.930 memavail=640868 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.459
Stats 2596.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63503 bytes_read=192263 bytes_retransmit=0 bytes_invalid=0 send_seq=4432 receive_seq=4432 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.7 sysload=0.01 cputime=102.958 memavail=641824 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.782
Stats 2597.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63569 bytes_read=192481 bytes_retransmit=0 bytes_invalid=0 send_seq=4437 receive_seq=4437 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.01 cputime=102.985 memavail=641596 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.698
Stats 2598.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63635 bytes_read=192729 bytes_retransmit=0 bytes_invalid=0 send_seq=4442 receive_seq=4442 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=32.6 sysload=0.01 cputime=103.020 memavail=641372 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.629
Stats 2599.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63701 bytes_read=192933 bytes_retransmit=0 bytes_invalid=0 send_seq=4447 receive_seq=4447 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.01 cputime=103.052 memavail=641372 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.559
Stats 2600.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63735 bytes_read=193127 bytes_retransmit=0 bytes_invalid=0 send_seq=4450 receive_seq=4450 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.01 cputime=103.083 memavail=641196 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.559
Stats 2601.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=63785 bytes_read=193370 bytes_retransmit=0 bytes_invalid=0 send_seq=4454 receive_seq=4454 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.0 sysload=0.01 cputime=103.113 memavail=641944 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.610
Stats 2602.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63867 bytes_read=193593 bytes_retransmit=0 bytes_invalid=0 send_seq=4460 receive_seq=4460 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.01 cputime=103.141 memavail=641692 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.434
Stats 2603.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=63928 bytes_read=193807 bytes_retransmit=0 bytes_invalid=0 send_seq=4464 receive_seq=4464 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.9 sysload=0.01 cputime=103.173 memavail=641212 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.745
Stats 2604.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=64010 bytes_read=194045 bytes_retransmit=0 bytes_invalid=0 send_seq=4470 receive_seq=4470 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.8 sysload=0.01 cputime=103.208 memavail=641212 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.694
Stats 2605.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=64108 bytes_read=194259 bytes_retransmit=0 bytes_invalid=0 send_seq=4477 receive_seq=4477 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.17 cputime=103.241 memavail=641212 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.654
Stats 2606.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=64169 bytes_read=194473 bytes_retransmit=0 bytes_invalid=0 send_seq=4481 receive_seq=4481 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.17 cputime=103.271 memavail=641872 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.523
Stats 2607.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64251 bytes_read=194725 bytes_retransmit=0 bytes_invalid=0 send_seq=4487 receive_seq=4487 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.4 sysload=0.17 cputime=103.300 memavail=640888 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.590
Stats 2608.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64333 bytes_read=194934 bytes_retransmit=0 bytes_invalid=0 send_seq=4493 receive_seq=4493 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=33.5 sysload=0.17 cputime=103.332 memavail=641796 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.495
Stats 2609.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64399 bytes_read=195153 bytes_retransmit=0 bytes_invalid=0 send_seq=4498 receive_seq=4498 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.6 sysload=0.17 cputime=103.365 memavail=641388 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.582
Stats 2610.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64476 bytes_read=195386 bytes_retransmit=0 bytes_invalid=0 send_seq=4503 receive_seq=4503 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=31.1 sysload=0.24 cputime=103.400 memavail=641136 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.566
Stats 2611.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64558 bytes_read=195595 bytes_retransmit=0 bytes_invalid=0 send_seq=4509 receive_seq=4509 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.2 sysload=0.24 cputime=103.429 memavail=641868 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.665
Stats 2612.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64635 bytes_read=195828 bytes_retransmit=0 bytes_invalid=0 send_seq=4514 receive_seq=4514 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.3 sysload=0.24 cputime=103.456 memavail=641140 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.516
Stats 2613.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64701 bytes_read=196061 bytes_retransmit=0 bytes_invalid=0 send_seq=4519 receive_seq=4519 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.6 sysload=0.24 cputime=103.490 memavail=641612 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.583
Stats 2614.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64751 bytes_read=196260 bytes_retransmit=0 bytes_invalid=0 send_seq=4523 receive_seq=4523 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.8 sysload=0.24 cputime=103.522 memavail=641164 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.479
Stats 2615.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64801 bytes_read=196474 bytes_retransmit=0 bytes_invalid=0 send_seq=4527 receive_seq=4527 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.0 sysload=0.30 cputime=103.554 memavail=641164 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.663
Stats 2616.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=64868 bytes_read=196702 bytes_retransmit=0 bytes_invalid=0 send_seq=4532 receive_seq=4531 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.5 sysload=0.30 cputime=103.583 memavail=641692 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.671
Stats 2617.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=64918 bytes_read=196931 bytes_retransmit=0 bytes_invalid=0 send_seq=4536 receive_seq=4536 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.7 sysload=0.30 cputime=103.610 memavail=641440 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.609
Stats 2618.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=64968 bytes_read=197145 bytes_retransmit=0 bytes_invalid=0 send_seq=4540 receive_seq=4540 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.8 sysload=0.30 cputime=103.642 memavail=641688 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.676
Stats 2619.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65050 bytes_read=197383 bytes_retransmit=0 bytes_invalid=0 send_seq=4546 receive_seq=4546 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.0 sysload=0.30 cputime=103.676 memavail=641696 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.656
Stats 2620.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65116 bytes_read=197587 bytes_retransmit=0 bytes_invalid=0 send_seq=4551 receive_seq=4551 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.6 sysload=0.43 cputime=103.708 memavail=641472 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.693
Stats 2621.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65193 bytes_read=197806 bytes_retransmit=0 bytes_invalid=0 send_seq=4556 receive_seq=4556 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.1 sysload=0.43 cputime=103.737 memavail=641708 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.750
Stats 2622.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65259 bytes_read=198053 bytes_retransmit=0 bytes_invalid=0 send_seq=4561 receive_seq=4561 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.43 cputime=103.765 memavail=641400 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.685
Stats 2623.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65325 bytes_read=198257 bytes_retransmit=0 bytes_invalid=0 send_seq=4566 receive_seq=4566 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.6 sysload=0.43 cputime=103.797 memavail=639448 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.472
Stats 2624.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65386 bytes_read=198471 bytes_retransmit=0 bytes_invalid=0 send_seq=4570 receive_seq=4570 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.43 cputime=103.830 memavail=639196 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.795
Stats 2625.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65468 bytes_read=198709 bytes_retransmit=0 bytes_invalid=0 send_seq=4576 receive_seq=4576 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.43 cputime=103.864 memavail=639196 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.538
Stats 2626.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=65566 bytes_read=198923 bytes_retransmit=0 bytes_invalid=0 send_seq=4583 receive_seq=4583 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.48 cputime=103.893 memavail=641888 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.646
Stats 2627.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65611 bytes_read=199146 bytes_retransmit=0 bytes_invalid=0 send_seq=4586 receive_seq=4586 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.48 cputime=103.920 memavail=640960 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.763
Stats 2628.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65661 bytes_read=199374 bytes_retransmit=0 bytes_invalid=0 send_seq=4590 receive_seq=4590 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=31.1 sysload=0.48 cputime=103.952 memavail=640924 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.502
Stats 2629.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65759 bytes_read=199588 bytes_retransmit=0 bytes_invalid=0 send_seq=4597 receive_seq=4597 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.48 cputime=103.984 memavail=640232 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.522
Stats 2630.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65820 bytes_read=199802 bytes_retransmit=0 bytes_invalid=0 send_seq=4601 receive_seq=4601 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=26.5 sysload=0.48 cputime=104.017 memavail=639784 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.588
Stats 2631.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65870 bytes_read=200030 bytes_retransmit=0 bytes_invalid=0 send_seq=4605 receive_seq=4605 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.52 cputime=104.046 memavail=641240 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.528
Stats 2632.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65936 bytes_read=200248 bytes_retransmit=0 bytes_invalid=0 send_seq=4610 receive_seq=4610 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.5 sysload=0.52 cputime=104.073 memavail=640540 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.618
Stats 2633.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=65997 bytes_read=200462 bytes_retransmit=0 bytes_invalid=0 send_seq=4614 receive_seq=4614 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.7 sysload=0.52 cputime=104.105 memavail=637876 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.691
Stats 2634.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=66063 bytes_read=200693 bytes_retransmit=0 bytes_invalid=0 send_seq=4619 receive_seq=4619 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=28.2 sysload=0.52 cputime=104.139 memavail=637404 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.786
Stats 2635.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=66145 bytes_read=200891 bytes_retransmit=0 bytes_invalid=0 send_seq=4625 receive_seq=4625 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.52 cputime=104.171 memavail=639816 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.510
Stats 2636.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=66222 bytes_read=201099 bytes_retransmit=0 bytes_invalid=0 send_seq=4630 receive_seq=4630 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.48 cputime=104.202 memavail=641188 print_time=763.196 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.700
Stats 2637.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=66679 bytes_read=201360 bytes_retransmit=0 bytes_invalid=0 send_seq=4640 receive_seq=4640 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.48 cputime=104.250 memavail=640740 print_time=916.308 buffer_time=19.623 print_stall=0 extruder: target=210 temp=210.1 pwm=0.636
Stats 2638.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=66729 bytes_read=201552 bytes_retransmit=0 bytes_invalid=0 send_seq=4644 receive_seq=4644 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=31.0 sysload=0.48 cputime=104.282 memavail=640704 print_time=916.308 buffer_time=18.622 print_stall=0 extruder: target=210 temp=210.1 pwm=0.636
Stats 2639.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=66774 bytes_read=201761 bytes_retransmit=0 bytes_invalid=0 send_seq=4647 receive_seq=4647 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.48 cputime=104.315 memavail=640256 print_time=916.308 buffer_time=17.622 print_stall=0 extruder: target=210 temp=210.0 pwm=0.694
Stats 2640.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=66856 bytes_read=201999 bytes_retransmit=0 bytes_invalid=0 send_seq=4653 receive_seq=4653 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.48 cputime=104.350 memavail=641244 print_time=916.308 buffer_time=16.621 print_stall=0 extruder: target=210 temp=210.1 pwm=0.625
Stats 2641.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=66949 bytes_read=202208 bytes_retransmit=0 bytes_invalid=0 send_seq=4659 receive_seq=4659 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.6 sysload=0.44 cputime=104.380 memavail=641412 print_time=916.308 buffer_time=15.621 print_stall=0 extruder: target=210 temp=209.7 pwm=0.738
Stats 2642.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67026 bytes_read=202441 bytes_retransmit=0 bytes_invalid=0 send_seq=4664 receive_seq=4664 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.44 cputime=104.411 memavail=640452 print_time=916.308 buffer_time=14.620 print_stall=0 extruder: target=210 temp=209.7 pwm=0.673
Stats 2643.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67092 bytes_read=202674 bytes_retransmit=0 bytes_invalid=0 send_seq=4669 receive_seq=4669 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.44 cputime=104.449 memavail=638772 print_time=916.308 buffer_time=13.620 print_stall=0 extruder: target=210 temp=209.4 pwm=0.771
Stats 2644.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67190 bytes_read=202888 bytes_retransmit=0 bytes_invalid=0 send_seq=4676 receive_seq=4676 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1 sysload=0.44 cputime=104.485 memavail=641124 print_time=916.308 buffer_time=12.619 print_stall=0 extruder: target=210 temp=208.8 pwm=1.000
Stats 2645.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67267 bytes_read=203107 bytes_retransmit=0 bytes_invalid=0 send_seq=4681 receive_seq=4681 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.3 sysload=0.44 cputime=104.521 memavail=640452 print_time=916.308 buffer_time=11.618 print_stall=0 extruder: target=210 temp=209.1 pwm=0.736
Stats 2646.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67333 bytes_read=203335 bytes_retransmit=0 bytes_invalid=0 send_seq=4686 receive_seq=4685 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.9 sysload=0.40 cputime=104.554 memavail=641264 print_time=916.308 buffer_time=10.617 print_stall=0 extruder: target=210 temp=208.7 pwm=0.868
Stats 2647.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67415 bytes_read=203563 bytes_retransmit=0 bytes_invalid=0 send_seq=4692 receive_seq=4692 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.3 sysload=0.40 cputime=104.585 memavail=640788 print_time=916.308 buffer_time=9.616 print_stall=0 extruder: target=210 temp=208.7 pwm=0.808
Stats 2648.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67476 bytes_read=203777 bytes_retransmit=0 bytes_invalid=0 send_seq=4696 receive_seq=4696 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.7 sysload=0.40 cputime=104.620 memavail=640340 print_time=916.308 buffer_time=8.615 print_stall=0 extruder: target=210 temp=208.5 pwm=0.881
Stats 2649.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67574 bytes_read=204020 bytes_retransmit=0 bytes_invalid=0 send_seq=4703 receive_seq=4703 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.40 cputime=104.656 memavail=641124 print_time=916.308 buffer_time=7.614 print_stall=0 extruder: target=210 temp=208.6 pwm=0.799
Stats 2650.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67656 bytes_read=204229 bytes_retransmit=0 bytes_invalid=0 send_seq=4709 receive_seq=4709 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.40 cputime=104.695 memavail=640424 print_time=916.308 buffer_time=6.614 print_stall=0 extruder: target=210 temp=208.8 pwm=0.708
Stats 2651.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67722 bytes_read=204448 bytes_retransmit=0 bytes_invalid=0 send_seq=4714 receive_seq=4714 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=32.1 sysload=0.37 cputime=104.734 memavail=641408 print_time=916.308 buffer_time=5.613 print_stall=0 extruder: target=210 temp=208.8 pwm=0.714
Stats 2652.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67804 bytes_read=204700 bytes_retransmit=0 bytes_invalid=0 send_seq=4720 receive_seq=4720 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.37 cputime=104.774 memavail=640980 print_time=916.308 buffer_time=4.612 print_stall=0 extruder: target=210 temp=208.8 pwm=0.743
Stats 2653.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67870 bytes_read=204904 bytes_retransmit=0 bytes_invalid=0 send_seq=4725 receive_seq=4725 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.7 sysload=0.37 cputime=104.816 memavail=638560 print_time=916.308 buffer_time=3.611 print_stall=0 extruder: target=210 temp=208.8 pwm=0.775
Stats 2654.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67904 bytes_read=205113 bytes_retransmit=0 bytes_invalid=0 send_seq=4728 receive_seq=4728 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=29.7 sysload=0.37 cputime=104.851 memavail=640916 print_time=916.308 buffer_time=2.611 print_stall=0 extruder: target=210 temp=208.9 pwm=0.775
Stats 2655.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=67970 bytes_read=205346 bytes_retransmit=0 bytes_invalid=0 send_seq=4733 receive_seq=4733 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.6 sysload=0.37 cputime=104.887 memavail=639768 print_time=916.308 buffer_time=1.610 print_stall=0 extruder: target=210 temp=209.0 pwm=0.669
Stats 2656.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68036 bytes_read=205550 bytes_retransmit=0 bytes_invalid=0 send_seq=4738 receive_seq=4738 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.5 sysload=0.34 cputime=104.918 memavail=641032 print_time=916.308 buffer_time=0.609 print_stall=0 extruder: target=210 temp=209.2 pwm=0.646
Stats 2657.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68122 bytes_read=205783 bytes_retransmit=0 bytes_invalid=0 send_seq=4743 receive_seq=4743 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.34 cputime=104.953 memavail=638176 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.2 pwm=0.772
Stats 2658.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68204 bytes_read=206021 bytes_retransmit=0 bytes_invalid=0 send_seq=4749 receive_seq=4749 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.34 cputime=104.989 memavail=637224 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.2 pwm=0.827
Stats 2659.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68286 bytes_read=206230 bytes_retransmit=0 bytes_invalid=0 send_seq=4755 receive_seq=4755 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.34 cputime=105.023 memavail=636776 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.597
Stats 2660.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68336 bytes_read=206459 bytes_retransmit=0 bytes_invalid=0 send_seq=4759 receive_seq=4759 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.34 cputime=105.058 memavail=636328 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.733
Stats 2661.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68418 bytes_read=206682 bytes_retransmit=0 bytes_invalid=0 send_seq=4765 receive_seq=4765 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.31 cputime=105.087 memavail=641840 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.717
Stats 2662.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68479 bytes_read=206895 bytes_retransmit=0 bytes_invalid=0 send_seq=4769 receive_seq=4769 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.31 cputime=105.114 memavail=640668 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.654
Stats 2663.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68561 bytes_read=207134 bytes_retransmit=0 bytes_invalid=0 send_seq=4775 receive_seq=4775 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=32.4 sysload=0.31 cputime=105.150 memavail=638704 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.532
Stats 2664.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68659 bytes_read=207362 bytes_retransmit=0 bytes_invalid=0 send_seq=4782 receive_seq=4782 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.31 cputime=105.184 memavail=638704 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.686
Stats 2665.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68741 bytes_read=207571 bytes_retransmit=0 bytes_invalid=0 send_seq=4788 receive_seq=4788 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=32.8 sysload=0.31 cputime=105.217 memavail=638480 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.572
Stats 2666.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68791 bytes_read=207800 bytes_retransmit=0 bytes_invalid=0 send_seq=4792 receive_seq=4792 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.0 sysload=0.29 cputime=105.252 memavail=641392 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.498
Stats 2667.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68889 bytes_read=208042 bytes_retransmit=0 bytes_invalid=0 send_seq=4799 receive_seq=4799 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.3 sysload=0.29 cputime=105.280 memavail=640512 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.644
Stats 2668.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=68955 bytes_read=208246 bytes_retransmit=0 bytes_invalid=0 send_seq=4804 receive_seq=4804 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.29 cputime=105.313 memavail=640036 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.484
Stats 2669.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=69016 bytes_read=208475 bytes_retransmit=0 bytes_invalid=0 send_seq=4808 receive_seq=4808 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.0 sysload=0.29 cputime=105.346 memavail=640668 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.522
Stats 2670.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=69082 bytes_read=208693 bytes_retransmit=0 bytes_invalid=0 send_seq=4813 receive_seq=4813 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.29 cputime=105.379 memavail=640860 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.481
Stats 2671.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=69132 bytes_read=208892 bytes_retransmit=0 bytes_invalid=0 send_seq=4817 receive_seq=4817 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.27 cputime=105.406 memavail=641172 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.1 pwm=0.567
Stats 2672.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69214 bytes_read=209145 bytes_retransmit=0 bytes_invalid=0 send_seq=4823 receive_seq=4823 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.6 sysload=0.27 cputime=105.436 memavail=640724 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.652
Stats 2673.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69280 bytes_read=209363 bytes_retransmit=0 bytes_invalid=0 send_seq=4828 receive_seq=4828 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.27 cputime=105.471 memavail=641040 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.698
Stats 2674.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69346 bytes_read=209567 bytes_retransmit=0 bytes_invalid=0 send_seq=4833 receive_seq=4833 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=32.8 sysload=0.27 cputime=105.505 memavail=640760 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.647
Stats 2675.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69412 bytes_read=209801 bytes_retransmit=0 bytes_invalid=0 send_seq=4838 receive_seq=4838 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.1 sysload=0.27 cputime=105.539 memavail=640312 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.722
Stats 2676.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69494 bytes_read=210024 bytes_retransmit=0 bytes_invalid=0 send_seq=4844 receive_seq=4844 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.0 sysload=0.24 cputime=105.570 memavail=641272 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.575
Stats 2677.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69560 bytes_read=210242 bytes_retransmit=0 bytes_invalid=0 send_seq=4849 receive_seq=4849 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.24 cputime=105.598 memavail=640592 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.580
Stats 2678.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69632 bytes_read=210492 bytes_retransmit=0 bytes_invalid=0 send_seq=4855 receive_seq=4855 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.24 cputime=105.632 memavail=641280 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.542
Stats 2679.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69693 bytes_read=210705 bytes_retransmit=0 bytes_invalid=0 send_seq=4859 receive_seq=4859 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.24 cputime=105.666 memavail=640580 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.744
Stats 2680.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69775 bytes_read=210914 bytes_retransmit=0 bytes_invalid=0 send_seq=4865 receive_seq=4865 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.9 sysload=0.24 cputime=105.702 memavail=639880 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.585
Stats 2681.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69841 bytes_read=211148 bytes_retransmit=0 bytes_invalid=0 send_seq=4870 receive_seq=4870 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.9 sysload=0.22 cputime=105.734 memavail=641720 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.637
Stats 2682.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69934 bytes_read=211385 bytes_retransmit=0 bytes_invalid=0 send_seq=4876 receive_seq=4876 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.22 cputime=105.766 memavail=641092 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.669
Stats 2683.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=69984 bytes_read=211584 bytes_retransmit=0 bytes_invalid=0 send_seq=4880 receive_seq=4880 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.22 cputime=105.800 memavail=638876 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.537
Stats 2684.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70050 bytes_read=211818 bytes_retransmit=0 bytes_invalid=0 send_seq=4885 receive_seq=4885 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=25.9 sysload=0.22 cputime=105.836 memavail=638428 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.579
Stats 2685.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70100 bytes_read=212031 bytes_retransmit=0 bytes_invalid=0 send_seq=4889 receive_seq=4889 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.22 cputime=105.872 memavail=640888 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.509
Stats 2686.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70177 bytes_read=212235 bytes_retransmit=0 bytes_invalid=0 send_seq=4894 receive_seq=4894 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.21 cputime=105.900 memavail=641344 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.456
Stats 2687.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=70259 bytes_read=212488 bytes_retransmit=0 bytes_invalid=0 send_seq=4900 receive_seq=4900 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.1 sysload=0.21 cputime=105.930 memavail=640704 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.660
Stats 2688.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=70341 bytes_read=212711 bytes_retransmit=0 bytes_invalid=0 send_seq=4906 receive_seq=4906 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.8 sysload=0.21 cputime=105.965 memavail=640600 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.565
Stats 2689.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=70407 bytes_read=212915 bytes_retransmit=0 bytes_invalid=0 send_seq=4911 receive_seq=4911 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.21 cputime=105.997 memavail=640568 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.486
Stats 2690.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=70473 bytes_read=213149 bytes_retransmit=0 bytes_invalid=0 send_seq=4916 receive_seq=4916 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.21 cputime=106.032 memavail=639364 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.647
Stats 2691.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=70523 bytes_read=213362 bytes_retransmit=0 bytes_invalid=0 send_seq=4920 receive_seq=4920 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.19 cputime=106.060 memavail=641280 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.747
Stats 2692.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70600 bytes_read=213580 bytes_retransmit=0 bytes_invalid=0 send_seq=4925 receive_seq=4925 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=32.9 sysload=0.19 cputime=106.091 memavail=640608 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.567
Stats 2693.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70677 bytes_read=213814 bytes_retransmit=0 bytes_invalid=0 send_seq=4930 receive_seq=4930 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.19 cputime=106.125 memavail=635748 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.573
Stats 2694.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70759 bytes_read=214031 bytes_retransmit=0 bytes_invalid=0 send_seq=4936 receive_seq=4936 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.9 sysload=0.19 cputime=106.150 memavail=633324 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.663
Stats 2695.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70825 bytes_read=214223 bytes_retransmit=0 bytes_invalid=0 send_seq=4941 receive_seq=4941 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.9 sysload=0.19 cputime=106.187 memavail=632624 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.652
Stats 2696.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=70907 bytes_read=214450 bytes_retransmit=0 bytes_invalid=0 send_seq=4947 receive_seq=4947 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=106.219 memavail=641272 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.476
Stats 2697.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71005 bytes_read=214681 bytes_retransmit=0 bytes_invalid=0 send_seq=4954 receive_seq=4954 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.17 cputime=106.249 memavail=640796 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.656
Stats 2698.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71082 bytes_read=214882 bytes_retransmit=0 bytes_invalid=0 send_seq=4959 receive_seq=4959 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.2 sysload=0.17 cputime=106.284 memavail=640096 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.545
Stats 2699.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71164 bytes_read=215121 bytes_retransmit=0 bytes_invalid=0 send_seq=4965 receive_seq=4965 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.9 sysload=0.17 cputime=106.319 memavail=639652 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.732
Stats 2700.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71241 bytes_read=215339 bytes_retransmit=0 bytes_invalid=0 send_seq=4970 receive_seq=4970 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.3 sysload=0.17 cputime=106.355 memavail=641284 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.568
Stats 2701.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71307 bytes_read=215543 bytes_retransmit=0 bytes_invalid=0 send_seq=4975 receive_seq=4975 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.24 cputime=106.384 memavail=641148 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.626
Stats 2702.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71373 bytes_read=215791 bytes_retransmit=0 bytes_invalid=0 send_seq=4980 receive_seq=4980 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.24 cputime=106.413 memavail=640988 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.600
Stats 2703.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71439 bytes_read=216009 bytes_retransmit=0 bytes_invalid=0 send_seq=4985 receive_seq=4985 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.24 cputime=106.448 memavail=640524 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.484
Stats 2704.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71500 bytes_read=216208 bytes_retransmit=0 bytes_invalid=0 send_seq=4989 receive_seq=4989 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.24 cputime=106.482 memavail=640524 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.648
Stats 2705.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71566 bytes_read=216442 bytes_retransmit=0 bytes_invalid=0 send_seq=4994 receive_seq=4994 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.24 cputime=106.517 memavail=640940 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.663
Stats 2706.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=71632 bytes_read=216660 bytes_retransmit=0 bytes_invalid=0 send_seq=4999 receive_seq=4999 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.30 cputime=106.545 memavail=641996 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.665
Stats 2707.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=71677 bytes_read=216868 bytes_retransmit=0 bytes_invalid=0 send_seq=5002 receive_seq=5002 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.1 sysload=0.30 cputime=106.572 memavail=641596 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.562
Stats 2708.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=71743 bytes_read=217102 bytes_retransmit=0 bytes_invalid=0 send_seq=5007 receive_seq=5007 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.30 cputime=106.606 memavail=641344 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.584
Stats 2709.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=71825 bytes_read=217325 bytes_retransmit=0 bytes_invalid=0 send_seq=5013 receive_seq=5013 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=25.7 sysload=0.30 cputime=106.640 memavail=641120 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.594
Stats 2710.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=71902 bytes_read=217529 bytes_retransmit=0 bytes_invalid=0 send_seq=5018 receive_seq=5018 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.3 sysload=0.30 cputime=106.673 memavail=641120 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.704
Stats 2711.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=71952 bytes_read=217772 bytes_retransmit=0 bytes_invalid=0 send_seq=5022 receive_seq=5022 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.28 cputime=106.701 memavail=641772 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.602
Stats 2712.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=72002 bytes_read=217985 bytes_retransmit=0 bytes_invalid=0 send_seq=5026 receive_seq=5026 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.4 sysload=0.28 cputime=106.728 memavail=641480 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.697
Stats 2713.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=72079 bytes_read=218189 bytes_retransmit=0 bytes_invalid=0 send_seq=5031 receive_seq=5031 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.28 cputime=106.763 memavail=639768 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.603
Stats 2714.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=72129 bytes_read=218432 bytes_retransmit=0 bytes_invalid=0 send_seq=5035 receive_seq=5035 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.3 sysload=0.28 cputime=106.800 memavail=639768 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.794
Stats 2715.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=72227 bytes_read=218646 bytes_retransmit=0 bytes_invalid=0 send_seq=5042 receive_seq=5042 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=23.7 sysload=0.28 cputime=106.836 memavail=642260 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.552
Stats 2716.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=72293 bytes_read=218850 bytes_retransmit=0 bytes_invalid=0 send_seq=5047 receive_seq=5047 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=25.7 sysload=0.25 cputime=106.867 memavail=641552 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.724
Stats 2717.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72359 bytes_read=219112 bytes_retransmit=0 bytes_invalid=0 send_seq=5052 receive_seq=5052 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.0 sysload=0.25 cputime=106.898 memavail=641600 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.430
Stats 2718.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72441 bytes_read=219321 bytes_retransmit=0 bytes_invalid=0 send_seq=5058 receive_seq=5058 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.1 sysload=0.25 cputime=106.932 memavail=641348 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.636
Stats 2719.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72507 bytes_read=219525 bytes_retransmit=0 bytes_invalid=0 send_seq=5063 receive_seq=5063 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.25 cputime=106.968 memavail=641124 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.585
Stats 2720.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72573 bytes_read=219773 bytes_retransmit=0 bytes_invalid=0 send_seq=5068 receive_seq=5068 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.7 sysload=0.25 cputime=107.004 memavail=641124 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.603
Stats 2721.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72639 bytes_read=219977 bytes_retransmit=0 bytes_invalid=0 send_seq=5073 receive_seq=5073 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=31.0 sysload=0.23 cputime=107.031 memavail=641748 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.665
Stats 2722.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72684 bytes_read=220185 bytes_retransmit=0 bytes_invalid=0 send_seq=5076 receive_seq=5076 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.2 sysload=0.23 cputime=107.057 memavail=640732 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.539
Stats 2723.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72750 bytes_read=220433 bytes_retransmit=0 bytes_invalid=0 send_seq=5081 receive_seq=5081 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.23 cputime=107.093 memavail=641752 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.756
Stats 2724.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72832 bytes_read=220642 bytes_retransmit=0 bytes_invalid=0 send_seq=5087 receive_seq=5087 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.1 sysload=0.23 cputime=107.127 memavail=641272 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.589
Stats 2725.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72904 bytes_read=220841 bytes_retransmit=0 bytes_invalid=0 send_seq=5091 receive_seq=5091 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.23 cputime=107.160 memavail=642220 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.703
Stats 2726.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=72970 bytes_read=221089 bytes_retransmit=0 bytes_invalid=0 send_seq=5096 receive_seq=5096 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.21 cputime=107.190 memavail=641788 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.546
Stats 2727.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=73036 bytes_read=221307 bytes_retransmit=0 bytes_invalid=0 send_seq=5101 receive_seq=5101 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.21 cputime=107.217 memavail=641024 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.704
Stats 2728.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=73097 bytes_read=221506 bytes_retransmit=0 bytes_invalid=0 send_seq=5105 receive_seq=5105 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.3 sysload=0.21 cputime=107.250 memavail=640800 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.675
Stats 2729.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=73147 bytes_read=221749 bytes_retransmit=0 bytes_invalid=0 send_seq=5109 receive_seq=5109 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.0 sysload=0.21 cputime=107.284 memavail=640800 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.691
Stats 2730.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=73229 bytes_read=221958 bytes_retransmit=0 bytes_invalid=0 send_seq=5115 receive_seq=5115 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.5 sysload=0.21 cputime=107.316 memavail=640548 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.653
Stats 2731.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=73279 bytes_read=222157 bytes_retransmit=0 bytes_invalid=0 send_seq=5119 receive_seq=5119 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=107.344 memavail=641776 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.745
Stats 2732.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73356 bytes_read=222419 bytes_retransmit=0 bytes_invalid=0 send_seq=5124 receive_seq=5124 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.20 cputime=107.374 memavail=640804 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.722
Stats 2733.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73438 bytes_read=222628 bytes_retransmit=0 bytes_invalid=0 send_seq=5130 receive_seq=5130 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=32.6 sysload=0.20 cputime=107.408 memavail=639352 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.578
Stats 2734.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73499 bytes_read=222827 bytes_retransmit=0 bytes_invalid=0 send_seq=5134 receive_seq=5134 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.20 cputime=107.444 memavail=641460 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.650
Stats 2735.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73581 bytes_read=223080 bytes_retransmit=0 bytes_invalid=0 send_seq=5140 receive_seq=5140 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.20 cputime=107.479 memavail=641460 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.558
Stats 2736.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73679 bytes_read=223294 bytes_retransmit=0 bytes_invalid=0 send_seq=5147 receive_seq=5147 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.0 sysload=0.18 cputime=107.506 memavail=642016 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.662
Stats 2737.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73756 bytes_read=223527 bytes_retransmit=0 bytes_invalid=0 send_seq=5152 receive_seq=5152 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.18 cputime=107.534 memavail=641272 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.500
Stats 2738.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73822 bytes_read=223760 bytes_retransmit=0 bytes_invalid=0 send_seq=5157 receive_seq=5157 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.18 cputime=107.568 memavail=641528 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.487
Stats 2739.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73905 bytes_read=223980 bytes_retransmit=0 bytes_invalid=0 send_seq=5163 receive_seq=5163 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.2 sysload=0.18 cputime=107.603 memavail=641332 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.733
Stats 2740.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=73966 bytes_read=224194 bytes_retransmit=0 bytes_invalid=0 send_seq=5167 receive_seq=5167 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.4 sysload=0.18 cputime=107.636 memavail=641332 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.782
Stats 2741.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74048 bytes_read=224432 bytes_retransmit=0 bytes_invalid=0 send_seq=5173 receive_seq=5173 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=32.1 sysload=0.17 cputime=107.665 memavail=641816 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.530
Stats 2742.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74130 bytes_read=224655 bytes_retransmit=0 bytes_invalid=0 send_seq=5179 receive_seq=5179 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=107.693 memavail=641060 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.650
Stats 2743.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74175 bytes_read=224864 bytes_retransmit=0 bytes_invalid=0 send_seq=5182 receive_seq=5182 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.17 cputime=107.724 memavail=638912 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.563
Stats 2744.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74241 bytes_read=225097 bytes_retransmit=0 bytes_invalid=0 send_seq=5187 receive_seq=5187 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.7 sysload=0.17 cputime=107.759 memavail=638912 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.684
Stats 2745.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74307 bytes_read=225301 bytes_retransmit=0 bytes_invalid=0 send_seq=5192 receive_seq=5192 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.9 sysload=0.17 cputime=107.791 memavail=642336 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.497
Stats 2746.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74368 bytes_read=225515 bytes_retransmit=0 bytes_invalid=0 send_seq=5196 receive_seq=5196 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.15 cputime=107.819 memavail=641808 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.491
Stats 2747.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=74450 bytes_read=225767 bytes_retransmit=0 bytes_invalid=0 send_seq=5202 receive_seq=5202 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.7 sysload=0.15 cputime=107.848 memavail=641304 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.596
Stats 2748.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=74516 bytes_read=225971 bytes_retransmit=0 bytes_invalid=0 send_seq=5207 receive_seq=5207 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=32.0 sysload=0.15 cputime=107.880 memavail=641080 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.706
Stats 2749.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=74577 bytes_read=226185 bytes_retransmit=0 bytes_invalid=0 send_seq=5211 receive_seq=5211 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.15 cputime=107.914 memavail=641080 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.546
Stats 2750.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=74659 bytes_read=226423 bytes_retransmit=0 bytes_invalid=0 send_seq=5217 receive_seq=5217 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.6 sysload=0.15 cputime=107.947 memavail=641080 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.581
Stats 2751.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=74757 bytes_read=226637 bytes_retransmit=0 bytes_invalid=0 send_seq=5224 receive_seq=5224 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.3 sysload=0.14 cputime=107.974 memavail=641804 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.626
Stats 2752.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74807 bytes_read=226865 bytes_retransmit=0 bytes_invalid=0 send_seq=5228 receive_seq=5228 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.7 sysload=0.14 cputime=108.004 memavail=641320 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.712
Stats 2753.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74889 bytes_read=227103 bytes_retransmit=0 bytes_invalid=0 send_seq=5234 receive_seq=5234 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.14 cputime=108.037 memavail=641824 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.577
Stats 2754.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74939 bytes_read=227292 bytes_retransmit=0 bytes_invalid=0 send_seq=5238 receive_seq=5238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.0 sysload=0.14 cputime=108.068 memavail=641380 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.643
Stats 2755.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=74989 bytes_read=227495 bytes_retransmit=0 bytes_invalid=0 send_seq=5242 receive_seq=5242 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.14 cputime=108.101 memavail=641556 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.553
Stats 2756.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75071 bytes_read=227721 bytes_retransmit=0 bytes_invalid=0 send_seq=5248 receive_seq=5248 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.13 cputime=108.129 memavail=641764 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.615
Stats 2757.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=75137 bytes_read=227931 bytes_retransmit=0 bytes_invalid=0 send_seq=5253 receive_seq=5253 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.0 sysload=0.13 cputime=108.159 memavail=640784 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.511
Stats 2758.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=75214 bytes_read=228150 bytes_retransmit=0 bytes_invalid=0 send_seq=5258 receive_seq=5258 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.13 cputime=108.192 memavail=641724 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.585
Stats 2759.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=75280 bytes_read=228383 bytes_retransmit=0 bytes_invalid=0 send_seq=5263 receive_seq=5263 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.13 cputime=108.226 memavail=641324 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.503
Stats 2760.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=75362 bytes_read=228592 bytes_retransmit=0 bytes_invalid=0 send_seq=5269 receive_seq=5269 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.13 cputime=108.258 memavail=641796 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.488
Stats 2761.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=75428 bytes_read=228811 bytes_retransmit=0 bytes_invalid=0 send_seq=5274 receive_seq=5274 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.4 sysload=0.12 cputime=108.290 memavail=641736 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.639
Stats 2762.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75462 bytes_read=229048 bytes_retransmit=0 bytes_invalid=0 send_seq=5277 receive_seq=5277 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.6 sysload=0.12 cputime=108.325 memavail=641020 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.706
Stats 2763.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75560 bytes_read=229262 bytes_retransmit=0 bytes_invalid=0 send_seq=5284 receive_seq=5284 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.12 cputime=108.361 memavail=638620 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.694
Stats 2764.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75621 bytes_read=229476 bytes_retransmit=0 bytes_invalid=0 send_seq=5288 receive_seq=5288 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.9 sysload=0.12 cputime=108.394 memavail=638620 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.576
Stats 2765.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75687 bytes_read=229709 bytes_retransmit=0 bytes_invalid=0 send_seq=5293 receive_seq=5293 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.12 cputime=108.428 memavail=638620 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.721
Stats 2766.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75780 bytes_read=229918 bytes_retransmit=0 bytes_invalid=0 send_seq=5299 receive_seq=5299 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.3 sysload=0.11 cputime=108.455 memavail=641240 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.388
Stats 2767.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75846 bytes_read=230151 bytes_retransmit=0 bytes_invalid=0 send_seq=5304 receive_seq=5304 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.0 sysload=0.11 cputime=108.486 memavail=641048 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.566
Stats 2768.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=75912 bytes_read=230384 bytes_retransmit=0 bytes_invalid=0 send_seq=5309 receive_seq=5309 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=32.2 sysload=0.11 cputime=108.523 memavail=640580 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.614
Stats 2769.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76010 bytes_read=230598 bytes_retransmit=0 bytes_invalid=0 send_seq=5316 receive_seq=5316 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.11 cputime=108.557 memavail=640328 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.760
Stats 2770.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76071 bytes_read=230812 bytes_retransmit=0 bytes_invalid=0 send_seq=5320 receive_seq=5320 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.11 cputime=108.591 memavail=640328 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.541
Stats 2771.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76121 bytes_read=231040 bytes_retransmit=0 bytes_invalid=0 send_seq=5324 receive_seq=5324 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.7 sysload=0.10 cputime=108.618 memavail=641908 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.649
Stats 2772.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76171 bytes_read=231253 bytes_retransmit=0 bytes_invalid=0 send_seq=5328 receive_seq=5328 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.10 cputime=108.647 memavail=641356 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.556
Stats 2773.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76248 bytes_read=231472 bytes_retransmit=0 bytes_invalid=0 send_seq=5333 receive_seq=5333 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.10 cputime=108.682 memavail=641376 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.639
Stats 2774.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76314 bytes_read=231705 bytes_retransmit=0 bytes_invalid=0 send_seq=5338 receive_seq=5338 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.3 sysload=0.10 cputime=108.717 memavail=640928 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.628
Stats 2775.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76364 bytes_read=231904 bytes_retransmit=0 bytes_invalid=0 send_seq=5342 receive_seq=5342 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.10 cputime=108.752 memavail=640928 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.554
Stats 2776.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76425 bytes_read=232118 bytes_retransmit=0 bytes_invalid=0 send_seq=5346 receive_seq=5346 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.3 sysload=0.09 cputime=108.781 memavail=641772 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.554
Stats 2777.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76518 bytes_read=232365 bytes_retransmit=0 bytes_invalid=0 send_seq=5352 receive_seq=5351 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.09 cputime=108.814 memavail=641288 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.698
Stats 2778.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76568 bytes_read=232569 bytes_retransmit=0 bytes_invalid=0 send_seq=5356 receive_seq=5356 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=31.8 sysload=0.09 cputime=108.848 memavail=641288 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.569
Stats 2779.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76618 bytes_read=232783 bytes_retransmit=0 bytes_invalid=0 send_seq=5360 receive_seq=5360 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.09 cputime=108.881 memavail=640784 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.659
Stats 2780.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76700 bytes_read=233021 bytes_retransmit=0 bytes_invalid=0 send_seq=5366 receive_seq=5366 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.6 sysload=0.09 cputime=108.916 memavail=640784 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.599
Stats 2781.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=76766 bytes_read=233225 bytes_retransmit=0 bytes_invalid=0 send_seq=5371 receive_seq=5371 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.08 cputime=108.943 memavail=641504 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.690
Stats 2782.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76816 bytes_read=233468 bytes_retransmit=0 bytes_invalid=0 send_seq=5375 receive_seq=5375 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.08 cputime=108.969 memavail=641024 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.537
Stats 2783.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76914 bytes_read=233696 bytes_retransmit=0 bytes_invalid=0 send_seq=5382 receive_seq=5382 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.08 cputime=109.002 memavail=641072 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.521
Stats 2784.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=76980 bytes_read=233900 bytes_retransmit=0 bytes_invalid=0 send_seq=5387 receive_seq=5387 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.9 sysload=0.08 cputime=109.036 memavail=640596 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.713
Stats 2785.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77046 bytes_read=234134 bytes_retransmit=0 bytes_invalid=0 send_seq=5392 receive_seq=5392 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.08 cputime=109.070 memavail=640344 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.696
Stats 2786.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77144 bytes_read=234362 bytes_retransmit=0 bytes_invalid=0 send_seq=5399 receive_seq=5399 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.24 cputime=109.098 memavail=641632 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.624
Stats 2787.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77210 bytes_read=234580 bytes_retransmit=0 bytes_invalid=0 send_seq=5404 receive_seq=5404 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.0 sysload=0.24 cputime=109.126 memavail=641152 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.742
Stats 2788.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77292 bytes_read=234819 bytes_retransmit=0 bytes_invalid=0 send_seq=5410 receive_seq=5410 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.24 cputime=109.162 memavail=641148 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.634
Stats 2789.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77326 bytes_read=235027 bytes_retransmit=0 bytes_invalid=0 send_seq=5413 receive_seq=5413 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.0 sysload=0.24 cputime=109.195 memavail=641148 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.634
Stats 2790.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77376 bytes_read=235226 bytes_retransmit=0 bytes_invalid=0 send_seq=5417 receive_seq=5417 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.24 cputime=109.228 memavail=640420 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.684
Stats 2791.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77437 bytes_read=235455 bytes_retransmit=0 bytes_invalid=0 send_seq=5421 receive_seq=5421 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.30 cputime=109.257 memavail=641688 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.648
Stats 2792.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77519 bytes_read=235692 bytes_retransmit=0 bytes_invalid=0 send_seq=5427 receive_seq=5427 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.30 cputime=109.288 memavail=641288 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.576
Stats 2793.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77585 bytes_read=235896 bytes_retransmit=0 bytes_invalid=0 send_seq=5432 receive_seq=5432 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.30 cputime=109.323 memavail=639580 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.456
Stats 2794.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77667 bytes_read=236135 bytes_retransmit=0 bytes_invalid=0 send_seq=5438 receive_seq=5438 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.30 cputime=109.360 memavail=639580 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.727
Stats 2795.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77749 bytes_read=236358 bytes_retransmit=0 bytes_invalid=0 send_seq=5444 receive_seq=5444 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.4 sysload=0.30 cputime=109.395 memavail=639076 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.714
Stats 2796.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=77831 bytes_read=236567 bytes_retransmit=0 bytes_invalid=0 send_seq=5450 receive_seq=5450 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.36 cputime=109.422 memavail=641788 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.636
Stats 2797.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=77913 bytes_read=236820 bytes_retransmit=0 bytes_invalid=0 send_seq=5456 receive_seq=5456 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.36 cputime=109.453 memavail=641304 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.523
Stats 2798.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78006 bytes_read=237043 bytes_retransmit=0 bytes_invalid=0 send_seq=5462 receive_seq=5462 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.9 sysload=0.36 cputime=109.489 memavail=641304 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.730
Stats 2799.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78088 bytes_read=237252 bytes_retransmit=0 bytes_invalid=0 send_seq=5468 receive_seq=5468 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.36 cputime=109.526 memavail=641304 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.461
Stats 2800.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78160 bytes_read=237502 bytes_retransmit=0 bytes_invalid=0 send_seq=5474 receive_seq=5474 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.9 sysload=0.36 cputime=109.564 memavail=641304 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.744
Stats 2801.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78226 bytes_read=237720 bytes_retransmit=0 bytes_invalid=0 send_seq=5479 receive_seq=5479 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.41 cputime=109.596 memavail=641424 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.704
Stats 2802.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78276 bytes_read=237933 bytes_retransmit=0 bytes_invalid=0 send_seq=5483 receive_seq=5483 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.41 cputime=109.627 memavail=640940 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.530
Stats 2803.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78342 bytes_read=238167 bytes_retransmit=0 bytes_invalid=0 send_seq=5488 receive_seq=5488 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.9 sysload=0.41 cputime=109.665 memavail=639276 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.572
Stats 2804.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78419 bytes_read=238385 bytes_retransmit=0 bytes_invalid=0 send_seq=5493 receive_seq=5493 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.41 cputime=109.705 memavail=640992 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.599
Stats 2805.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78485 bytes_read=238589 bytes_retransmit=0 bytes_invalid=0 send_seq=5498 receive_seq=5498 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.4 sysload=0.41 cputime=109.744 memavail=640740 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.494
Stats 2806.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78567 bytes_read=238828 bytes_retransmit=0 bytes_invalid=0 send_seq=5504 receive_seq=5504 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.4 sysload=0.45 cputime=109.778 memavail=641792 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.694
Stats 2807.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78649 bytes_read=239065 bytes_retransmit=0 bytes_invalid=0 send_seq=5510 receive_seq=5510 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.8 sysload=0.45 cputime=109.810 memavail=641536 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.588
Stats 2808.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78715 bytes_read=239269 bytes_retransmit=0 bytes_invalid=0 send_seq=5515 receive_seq=5515 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.45 cputime=109.847 memavail=641312 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.675
Stats 2809.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78797 bytes_read=239508 bytes_retransmit=0 bytes_invalid=0 send_seq=5521 receive_seq=5521 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.45 cputime=109.886 memavail=641064 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.546
Stats 2810.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78863 bytes_read=239726 bytes_retransmit=0 bytes_invalid=0 send_seq=5526 receive_seq=5526 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.45 cputime=109.924 memavail=641064 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.657
Stats 2811.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78924 bytes_read=239925 bytes_retransmit=0 bytes_invalid=0 send_seq=5530 receive_seq=5530 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.50 cputime=109.955 memavail=641824 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.492
Stats 2812.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=78990 bytes_read=240173 bytes_retransmit=0 bytes_invalid=0 send_seq=5535 receive_seq=5535 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.50 cputime=109.987 memavail=641088 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.643
Stats 2813.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=79088 bytes_read=240398 bytes_retransmit=0 bytes_invalid=0 send_seq=5542 receive_seq=5542 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.50 cputime=110.025 memavail=639132 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.519
Stats 2814.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=79138 bytes_read=240587 bytes_retransmit=0 bytes_invalid=0 send_seq=5546 receive_seq=5546 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.3 sysload=0.50 cputime=110.051 memavail=634044 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.447
Stats 2815.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=79199 bytes_read=240804 bytes_retransmit=0 bytes_invalid=0 send_seq=5550 receive_seq=5550 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.9 sysload=0.50 cputime=110.081 memavail=633820 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.716
Stats 2816.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=79249 bytes_read=241006 bytes_retransmit=0 bytes_invalid=0 send_seq=5554 receive_seq=5554 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.3 sysload=0.46 cputime=110.112 memavail=641808 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.514
Stats 2817.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79331 bytes_read=241226 bytes_retransmit=0 bytes_invalid=0 send_seq=5560 receive_seq=5560 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.2 sysload=0.46 cputime=110.142 memavail=641800 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.758
Stats 2818.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79397 bytes_read=241460 bytes_retransmit=0 bytes_invalid=0 send_seq=5565 receive_seq=5565 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.46 cputime=110.178 memavail=641340 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.735
Stats 2819.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79495 bytes_read=241688 bytes_retransmit=0 bytes_invalid=0 send_seq=5572 receive_seq=5572 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.8 sysload=0.46 cputime=110.216 memavail=641340 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.589
Stats 2820.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79561 bytes_read=241892 bytes_retransmit=0 bytes_invalid=0 send_seq=5577 receive_seq=5577 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.46 cputime=110.251 memavail=641400 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.604
Stats 2821.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79595 bytes_read=242116 bytes_retransmit=0 bytes_invalid=0 send_seq=5580 receive_seq=5580 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=30.7 sysload=0.42 cputime=110.281 memavail=641520 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.604
Stats 2822.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79656 bytes_read=242343 bytes_retransmit=0 bytes_invalid=0 send_seq=5584 receive_seq=5584 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.42 cputime=110.311 memavail=641124 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.579
Stats 2823.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79722 bytes_read=242547 bytes_retransmit=0 bytes_invalid=0 send_seq=5589 receive_seq=5589 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.42 cputime=110.344 memavail=639172 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.584
Stats 2824.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79788 bytes_read=242781 bytes_retransmit=0 bytes_invalid=0 send_seq=5594 receive_seq=5594 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.42 cputime=110.379 memavail=639172 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.457
Stats 2825.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79870 bytes_read=243004 bytes_retransmit=0 bytes_invalid=0 send_seq=5600 receive_seq=5600 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.1 sysload=0.42 cputime=110.415 memavail=642316 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.730
Stats 2826.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=79931 bytes_read=243203 bytes_retransmit=0 bytes_invalid=0 send_seq=5604 receive_seq=5604 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.6 sysload=0.39 cputime=110.450 memavail=641800 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.710
Stats 2827.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=79997 bytes_read=243451 bytes_retransmit=0 bytes_invalid=0 send_seq=5609 receive_seq=5609 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.5 sysload=0.39 cputime=110.486 memavail=641324 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.684
Stats 2828.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80079 bytes_read=243674 bytes_retransmit=0 bytes_invalid=0 send_seq=5615 receive_seq=5615 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.39 cputime=110.522 memavail=639572 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.434
Stats 2829.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80124 bytes_read=243868 bytes_retransmit=0 bytes_invalid=0 send_seq=5618 receive_seq=5618 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.6 sysload=0.39 cputime=110.554 memavail=639572 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.621
Stats 2830.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80206 bytes_read=244121 bytes_retransmit=0 bytes_invalid=0 send_seq=5624 receive_seq=5624 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=31.9 sysload=0.39 cputime=110.591 memavail=639572 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.547
Stats 2831.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80304 bytes_read=244335 bytes_retransmit=0 bytes_invalid=0 send_seq=5631 receive_seq=5631 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.36 cputime=110.619 memavail=641816 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.531
Stats 2832.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80365 bytes_read=244548 bytes_retransmit=0 bytes_invalid=0 send_seq=5635 receive_seq=5635 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.36 cputime=110.647 memavail=640088 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.821
Stats 2833.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80431 bytes_read=244796 bytes_retransmit=0 bytes_invalid=0 send_seq=5640 receive_seq=5640 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.36 cputime=110.683 memavail=640984 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.566
Stats 2834.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80513 bytes_read=245005 bytes_retransmit=0 bytes_invalid=0 send_seq=5646 receive_seq=5646 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.8 sysload=0.36 cputime=110.717 memavail=640760 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.503
Stats 2835.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80590 bytes_read=245209 bytes_retransmit=0 bytes_invalid=0 send_seq=5651 receive_seq=5651 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.6 sysload=0.36 cputime=110.750 memavail=639804 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.599
Stats 2836.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=80656 bytes_read=245457 bytes_retransmit=0 bytes_invalid=0 send_seq=5656 receive_seq=5656 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.33 cputime=110.779 memavail=641636 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.536
Stats 2837.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=80722 bytes_read=245675 bytes_retransmit=0 bytes_invalid=0 send_seq=5661 receive_seq=5661 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.33 cputime=110.808 memavail=641344 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.422
Stats 2838.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=80772 bytes_read=245874 bytes_retransmit=0 bytes_invalid=0 send_seq=5665 receive_seq=5665 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.33 cputime=110.843 memavail=640616 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.564
Stats 2839.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=80838 bytes_read=246122 bytes_retransmit=0 bytes_invalid=0 send_seq=5670 receive_seq=5670 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.8 sysload=0.33 cputime=110.879 memavail=640392 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.533
Stats 2840.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=80920 bytes_read=246331 bytes_retransmit=0 bytes_invalid=0 send_seq=5676 receive_seq=5676 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.33 cputime=110.913 memavail=640140 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.711
Stats 2841.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=80997 bytes_read=246535 bytes_retransmit=0 bytes_invalid=0 send_seq=5681 receive_seq=5681 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.30 cputime=110.940 memavail=641628 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.536
Stats 2842.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81079 bytes_read=246802 bytes_retransmit=0 bytes_invalid=0 send_seq=5687 receive_seq=5687 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.30 cputime=110.972 memavail=641152 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.645
Stats 2843.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81172 bytes_read=247011 bytes_retransmit=0 bytes_invalid=0 send_seq=5693 receive_seq=5693 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.30 cputime=111.005 memavail=641792 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.462
Stats 2844.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81233 bytes_read=247210 bytes_retransmit=0 bytes_invalid=0 send_seq=5697 receive_seq=5697 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.7 sysload=0.30 cputime=111.039 memavail=641324 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.636
Stats 2845.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81299 bytes_read=247458 bytes_retransmit=0 bytes_invalid=0 send_seq=5702 receive_seq=5702 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.30 cputime=111.074 memavail=641324 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.663
Stats 2846.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81381 bytes_read=247667 bytes_retransmit=0 bytes_invalid=0 send_seq=5708 receive_seq=5708 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.28 cputime=111.100 memavail=641796 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.451
Stats 2847.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81442 bytes_read=247880 bytes_retransmit=0 bytes_invalid=0 send_seq=5712 receive_seq=5712 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.28 cputime=111.131 memavail=641540 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.719
Stats 2848.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81524 bytes_read=248133 bytes_retransmit=0 bytes_invalid=0 send_seq=5718 receive_seq=5718 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.0 sysload=0.28 cputime=111.166 memavail=641316 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.544
Stats 2849.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81590 bytes_read=248337 bytes_retransmit=0 bytes_invalid=0 send_seq=5723 receive_seq=5723 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.4 sysload=0.28 cputime=111.200 memavail=640568 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.769
Stats 2850.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81662 bytes_read=248536 bytes_retransmit=0 bytes_invalid=0 send_seq=5727 receive_seq=5727 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.28 cputime=111.235 memavail=640568 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.560
Stats 2851.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=81728 bytes_read=248784 bytes_retransmit=0 bytes_invalid=0 send_seq=5732 receive_seq=5732 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.3 sysload=0.25 cputime=111.264 memavail=641796 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.565
Stats 2852.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=81794 bytes_read=249002 bytes_retransmit=0 bytes_invalid=0 send_seq=5737 receive_seq=5737 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.8 sysload=0.25 cputime=111.294 memavail=641544 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.603
Stats 2853.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=81855 bytes_read=249201 bytes_retransmit=0 bytes_invalid=0 send_seq=5741 receive_seq=5741 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.25 cputime=111.330 memavail=639608 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.447
Stats 2854.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=81932 bytes_read=249449 bytes_retransmit=0 bytes_invalid=0 send_seq=5746 receive_seq=5746 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.8 sysload=0.25 cputime=111.367 memavail=639608 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.535
Stats 2855.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=81998 bytes_read=249653 bytes_retransmit=0 bytes_invalid=0 send_seq=5751 receive_seq=5751 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.25 cputime=111.402 memavail=639608 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.696
Stats 2856.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=82059 bytes_read=249867 bytes_retransmit=0 bytes_invalid=0 send_seq=5755 receive_seq=5755 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.23 cputime=111.429 memavail=641800 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.690
Stats 2857.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82125 bytes_read=250114 bytes_retransmit=0 bytes_invalid=0 send_seq=5760 receive_seq=5760 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.8 sysload=0.23 cputime=111.460 memavail=641072 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.633
Stats 2858.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82175 bytes_read=250313 bytes_retransmit=0 bytes_invalid=0 send_seq=5764 receive_seq=5764 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.2 sysload=0.23 cputime=111.493 memavail=641072 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.545
Stats 2859.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82236 bytes_read=250527 bytes_retransmit=0 bytes_invalid=0 send_seq=5768 receive_seq=5768 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.23 cputime=111.526 memavail=640568 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.689
Stats 2860.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82318 bytes_read=250765 bytes_retransmit=0 bytes_invalid=0 send_seq=5774 receive_seq=5774 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.23 cputime=111.561 memavail=641804 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.818
Stats 2861.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82401 bytes_read=250985 bytes_retransmit=0 bytes_invalid=0 send_seq=5780 receive_seq=5780 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.2 sysload=0.46 cputime=111.588 memavail=641284 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.724
Stats 2862.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82462 bytes_read=251213 bytes_retransmit=0 bytes_invalid=0 send_seq=5784 receive_seq=5784 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.0 sysload=0.46 cputime=111.618 memavail=641032 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.712
Stats 2863.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82512 bytes_read=251441 bytes_retransmit=0 bytes_invalid=0 send_seq=5788 receive_seq=5788 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.6 sysload=0.46 cputime=111.651 memavail=638872 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.567
Stats 2864.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82594 bytes_read=251650 bytes_retransmit=0 bytes_invalid=0 send_seq=5794 receive_seq=5794 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.2 sysload=0.46 cputime=111.685 memavail=638872 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.670
Stats 2865.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82671 bytes_read=251869 bytes_retransmit=0 bytes_invalid=0 send_seq=5799 receive_seq=5799 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=32.6 sysload=0.46 cputime=111.721 memavail=638620 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.377
Stats 2866.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=82737 bytes_read=252102 bytes_retransmit=0 bytes_invalid=0 send_seq=5804 receive_seq=5804 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.50 cputime=111.749 memavail=641784 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.602
Stats 2867.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=82814 bytes_read=252320 bytes_retransmit=0 bytes_invalid=0 send_seq=5809 receive_seq=5809 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=31.6 sysload=0.50 cputime=111.779 memavail=641532 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.509
Stats 2868.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=82875 bytes_read=252534 bytes_retransmit=0 bytes_invalid=0 send_seq=5813 receive_seq=5813 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.2 sysload=0.50 cputime=111.815 memavail=641608 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.457
Stats 2869.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=82957 bytes_read=252772 bytes_retransmit=0 bytes_invalid=0 send_seq=5819 receive_seq=5819 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.50 cputime=111.850 memavail=641356 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.627
Stats 2870.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=83039 bytes_read=252981 bytes_retransmit=0 bytes_invalid=0 send_seq=5825 receive_seq=5825 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.6 sysload=0.50 cputime=111.883 memavail=640628 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.593
Stats 2871.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=83073 bytes_read=253190 bytes_retransmit=0 bytes_invalid=0 send_seq=5828 receive_seq=5828 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.1 sysload=0.46 cputime=111.908 memavail=641976 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.593
Stats 2872.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83139 bytes_read=253437 bytes_retransmit=0 bytes_invalid=0 send_seq=5833 receive_seq=5833 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.46 cputime=111.937 memavail=641496 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.572
Stats 2873.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83237 bytes_read=253644 bytes_retransmit=0 bytes_invalid=0 send_seq=5840 receive_seq=5840 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.46 cputime=111.971 memavail=641756 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.624
Stats 2874.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83298 bytes_read=253847 bytes_retransmit=0 bytes_invalid=0 send_seq=5844 receive_seq=5844 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.5 sysload=0.46 cputime=112.005 memavail=641280 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.473
Stats 2875.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83364 bytes_read=254068 bytes_retransmit=0 bytes_invalid=0 send_seq=5849 receive_seq=5849 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.46 cputime=112.037 memavail=641028 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.678
Stats 2876.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83462 bytes_read=254272 bytes_retransmit=0 bytes_invalid=0 send_seq=5856 receive_seq=5856 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=31.7 sysload=0.58 cputime=112.063 memavail=641768 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.595
Stats 2877.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83507 bytes_read=254495 bytes_retransmit=0 bytes_invalid=0 send_seq=5859 receive_seq=5859 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.4 sysload=0.58 cputime=112.093 memavail=641508 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.679
Stats 2878.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83589 bytes_read=254733 bytes_retransmit=0 bytes_invalid=0 send_seq=5865 receive_seq=5865 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.58 cputime=112.127 memavail=641284 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.697
Stats 2879.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83655 bytes_read=254937 bytes_retransmit=0 bytes_invalid=0 send_seq=5870 receive_seq=5870 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.58 cputime=112.160 memavail=641284 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.530
Stats 2880.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83732 bytes_read=255156 bytes_retransmit=0 bytes_invalid=0 send_seq=5875 receive_seq=5875 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.1 sysload=0.58 cputime=112.197 memavail=641760 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.803
Stats 2881.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=83798 bytes_read=255389 bytes_retransmit=0 bytes_invalid=0 send_seq=5880 receive_seq=5880 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.6 sysload=0.70 cputime=112.225 memavail=641748 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.579
Stats 2882.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=83880 bytes_read=255612 bytes_retransmit=0 bytes_invalid=0 send_seq=5886 receive_seq=5886 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.70 cputime=112.257 memavail=641744 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.578
Stats 2883.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=83930 bytes_read=255826 bytes_retransmit=0 bytes_invalid=0 send_seq=5890 receive_seq=5890 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.4 sysload=0.70 cputime=112.293 memavail=641264 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.648
Stats 2884.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=83980 bytes_read=256054 bytes_retransmit=0 bytes_invalid=0 send_seq=5894 receive_seq=5894 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.2 sysload=0.70 cputime=112.330 memavail=641264 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.482
Stats 2885.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84078 bytes_read=256268 bytes_retransmit=0 bytes_invalid=0 send_seq=5901 receive_seq=5901 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.70 cputime=112.367 memavail=641380 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.590
Stats 2886.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84144 bytes_read=256487 bytes_retransmit=0 bytes_invalid=0 send_seq=5906 receive_seq=5906 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=31.6 sysload=0.72 cputime=112.395 memavail=641632 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.597
Stats 2887.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84210 bytes_read=256734 bytes_retransmit=0 bytes_invalid=0 send_seq=5911 receive_seq=5911 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.72 cputime=112.428 memavail=641380 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.517
Stats 2888.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84303 bytes_read=256943 bytes_retransmit=0 bytes_invalid=0 send_seq=5917 receive_seq=5917 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.72 cputime=112.464 memavail=641632 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.679
Stats 2889.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84380 bytes_read=257162 bytes_retransmit=0 bytes_invalid=0 send_seq=5922 receive_seq=5922 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=32.3 sysload=0.72 cputime=112.500 memavail=641380 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.533
Stats 2890.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84446 bytes_read=257395 bytes_retransmit=0 bytes_invalid=0 send_seq=5927 receive_seq=5927 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.9 sysload=0.72 cputime=112.538 memavail=640760 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.435
Stats 2891.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84544 bytes_read=257609 bytes_retransmit=0 bytes_invalid=0 send_seq=5934 receive_seq=5934 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.8 sysload=0.74 cputime=112.568 memavail=641796 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.642
Stats 2892.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=84578 bytes_read=257832 bytes_retransmit=0 bytes_invalid=0 send_seq=5937 receive_seq=5937 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.4 sysload=0.74 cputime=112.600 memavail=641320 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.642
Stats 2893.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=84628 bytes_read=258055 bytes_retransmit=0 bytes_invalid=0 send_seq=5941 receive_seq=5940 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.2 sysload=0.74 cputime=112.634 memavail=639384 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.501
Stats 2894.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=84678 bytes_read=258259 bytes_retransmit=0 bytes_invalid=0 send_seq=5945 receive_seq=5945 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.74 cputime=112.669 memavail=639384 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.621
Stats 2895.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=84723 bytes_read=258468 bytes_retransmit=0 bytes_invalid=0 send_seq=5948 receive_seq=5948 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.74 cputime=112.704 memavail=639384 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.701
Stats 2896.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=84805 bytes_read=258701 bytes_retransmit=0 bytes_invalid=0 send_seq=5954 receive_seq=5953 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.5 sysload=0.68 cputime=112.733 memavail=641724 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.748
Stats 2897.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84871 bytes_read=258924 bytes_retransmit=0 bytes_invalid=0 send_seq=5959 receive_seq=5959 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.68 cputime=112.760 memavail=641220 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.571
Stats 2898.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=84937 bytes_read=259143 bytes_retransmit=0 bytes_invalid=0 send_seq=5964 receive_seq=5964 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.0 sysload=0.68 cputime=112.794 memavail=641220 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.560
Stats 2899.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=85030 bytes_read=259381 bytes_retransmit=0 bytes_invalid=0 send_seq=5970 receive_seq=5970 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=32.6 sysload=0.68 cputime=112.830 memavail=641472 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.544
Stats 2900.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=85112 bytes_read=259590 bytes_retransmit=0 bytes_invalid=0 send_seq=5976 receive_seq=5976 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=31.6 sysload=0.68 cputime=112.865 memavail=642084 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.630
Stats 2901.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=85189 bytes_read=259809 bytes_retransmit=0 bytes_invalid=0 send_seq=5981 receive_seq=5981 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.63 cputime=112.895 memavail=641608 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.446
Stats 2902.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85271 bytes_read=260061 bytes_retransmit=0 bytes_invalid=0 send_seq=5987 receive_seq=5987 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.6 sysload=0.63 cputime=112.925 memavail=641544 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.411
Stats 2903.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85337 bytes_read=260265 bytes_retransmit=0 bytes_invalid=0 send_seq=5992 receive_seq=5992 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.5 pwm=0.000 mcu_temp: temp=28.4 sysload=0.63 cputime=112.960 memavail=641364 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.687
Stats 2904.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85387 bytes_read=260494 bytes_retransmit=0 bytes_invalid=0 send_seq=5996 receive_seq=5996 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.4 sysload=0.63 cputime=112.994 memavail=641112 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.575
Stats 2905.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85469 bytes_read=260717 bytes_retransmit=0 bytes_invalid=0 send_seq=6002 receive_seq=6002 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.63 cputime=113.031 memavail=640860 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.771
Stats 2906.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85546 bytes_read=260921 bytes_retransmit=0 bytes_invalid=0 send_seq=6007 receive_seq=6007 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.58 cputime=113.059 memavail=642124 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.540
Stats 2907.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85607 bytes_read=261164 bytes_retransmit=0 bytes_invalid=0 send_seq=6011 receive_seq=6011 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.58 cputime=113.090 memavail=641900 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.530
Stats 2908.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85705 bytes_read=261392 bytes_retransmit=0 bytes_invalid=0 send_seq=6018 receive_seq=6018 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.58 cputime=113.129 memavail=642068 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.610
Stats 2909.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85755 bytes_read=261591 bytes_retransmit=0 bytes_invalid=0 send_seq=6022 receive_seq=6022 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.58 cputime=113.167 memavail=641672 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.731
Stats 2910.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85837 bytes_read=261830 bytes_retransmit=0 bytes_invalid=0 send_seq=6028 receive_seq=6028 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.58 cputime=113.203 memavail=641468 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.585
Stats 2911.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=85903 bytes_read=262048 bytes_retransmit=0 bytes_invalid=0 send_seq=6033 receive_seq=6033 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.53 cputime=113.233 memavail=641724 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.559
Stats 2912.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=85985 bytes_read=262271 bytes_retransmit=0 bytes_invalid=0 send_seq=6039 receive_seq=6039 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.53 cputime=113.266 memavail=641500 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.677
Stats 2913.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86030 bytes_read=262495 bytes_retransmit=0 bytes_invalid=0 send_seq=6042 receive_seq=6042 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.53 cputime=113.303 memavail=639288 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.592
Stats 2914.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86080 bytes_read=262708 bytes_retransmit=0 bytes_invalid=0 send_seq=6046 receive_seq=6046 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.53 cputime=113.339 memavail=639288 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.650
Stats 2915.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86146 bytes_read=262912 bytes_retransmit=0 bytes_invalid=0 send_seq=6051 receive_seq=6051 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.8 sysload=0.53 cputime=113.374 memavail=639036 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.774
Stats 2916.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86228 bytes_read=263151 bytes_retransmit=0 bytes_invalid=0 send_seq=6057 receive_seq=6057 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.6 sysload=0.49 cputime=113.402 memavail=641708 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.634
Stats 2917.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86294 bytes_read=263383 bytes_retransmit=0 bytes_invalid=0 send_seq=6062 receive_seq=6062 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.8 sysload=0.49 cputime=113.432 memavail=641624 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.638
Stats 2918.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86376 bytes_read=263592 bytes_retransmit=0 bytes_invalid=0 send_seq=6068 receive_seq=6068 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=27.3 sysload=0.49 cputime=113.467 memavail=641148 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.501
Stats 2919.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86442 bytes_read=263826 bytes_retransmit=0 bytes_invalid=0 send_seq=6073 receive_seq=6073 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.49 cputime=113.503 memavail=640644 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.718
Stats 2920.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86503 bytes_read=264039 bytes_retransmit=0 bytes_invalid=0 send_seq=6077 receive_seq=6077 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.49 cputime=113.540 memavail=641360 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.544
Stats 2921.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86569 bytes_read=264243 bytes_retransmit=0 bytes_invalid=0 send_seq=6082 receive_seq=6082 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=26.6 sysload=0.45 cputime=113.567 memavail=641804 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.623
Stats 2922.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86625 bytes_read=264486 bytes_retransmit=0 bytes_invalid=0 send_seq=6087 receive_seq=6086 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.45 cputime=113.597 memavail=641328 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.514
Stats 2923.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86691 bytes_read=264720 bytes_retransmit=0 bytes_invalid=0 send_seq=6092 receive_seq=6092 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.8 sysload=0.45 cputime=113.633 memavail=639588 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.512
Stats 2924.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86773 bytes_read=264929 bytes_retransmit=0 bytes_invalid=0 send_seq=6098 receive_seq=6098 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=25.8 sysload=0.45 cputime=113.668 memavail=639588 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.596
Stats 2925.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86855 bytes_read=265168 bytes_retransmit=0 bytes_invalid=0 send_seq=6104 receive_seq=6104 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=31.7 sysload=0.45 cputime=113.705 memavail=639588 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.422
Stats 2926.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=86932 bytes_read=265386 bytes_retransmit=0 bytes_invalid=0 send_seq=6109 receive_seq=6109 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.9 sysload=0.41 cputime=113.734 memavail=641712 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.536
Stats 2927.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=86993 bytes_read=265599 bytes_retransmit=0 bytes_invalid=0 send_seq=6113 receive_seq=6113 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.6 sysload=0.41 cputime=113.765 memavail=641296 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.563
Stats 2928.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87059 bytes_read=265833 bytes_retransmit=0 bytes_invalid=0 send_seq=6118 receive_seq=6118 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.41 cputime=113.798 memavail=641044 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.558
Stats 2929.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87109 bytes_read=266046 bytes_retransmit=0 bytes_invalid=0 send_seq=6122 receive_seq=6122 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.5 sysload=0.41 cputime=113.831 memavail=641044 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.642
Stats 2930.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87154 bytes_read=266240 bytes_retransmit=0 bytes_invalid=0 send_seq=6125 receive_seq=6125 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.3 sysload=0.41 cputime=113.862 memavail=640540 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.511
Stats 2931.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87220 bytes_read=266474 bytes_retransmit=0 bytes_invalid=0 send_seq=6130 receive_seq=6130 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=32.3 sysload=0.38 cputime=113.888 memavail=641776 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.718
Stats 2932.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=87286 bytes_read=266705 bytes_retransmit=0 bytes_invalid=0 send_seq=6135 receive_seq=6135 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.5 sysload=0.38 cputime=113.919 memavail=641296 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.503
Stats 2933.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=87363 bytes_read=266899 bytes_retransmit=0 bytes_invalid=0 send_seq=6140 receive_seq=6140 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.38 cputime=113.952 memavail=639584 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.454
Stats 2934.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=87429 bytes_read=267121 bytes_retransmit=0 bytes_invalid=0 send_seq=6145 receive_seq=6145 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.38 cputime=113.982 memavail=634084 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.619
Stats 2935.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=87495 bytes_read=267328 bytes_retransmit=0 bytes_invalid=0 send_seq=6150 receive_seq=6150 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.7 sysload=0.38 cputime=114.015 memavail=637968 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.607
Stats 2936.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=87561 bytes_read=267525 bytes_retransmit=0 bytes_invalid=0 send_seq=6155 receive_seq=6155 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=26.4 sysload=0.35 cputime=114.050 memavail=641024 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.587
Stats 2937.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87606 bytes_read=267763 bytes_retransmit=0 bytes_invalid=0 send_seq=6158 receive_seq=6158 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.35 cputime=114.084 memavail=640548 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.672
Stats 2938.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87688 bytes_read=267986 bytes_retransmit=0 bytes_invalid=0 send_seq=6164 receive_seq=6164 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.35 cputime=114.119 memavail=640548 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.543
Stats 2939.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87765 bytes_read=268190 bytes_retransmit=0 bytes_invalid=0 send_seq=6169 receive_seq=6169 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.35 cputime=114.152 memavail=639540 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.560
Stats 2940.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87847 bytes_read=268429 bytes_retransmit=0 bytes_invalid=0 send_seq=6175 receive_seq=6175 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.3 sysload=0.35 cputime=114.186 memavail=641512 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.577
Stats 2941.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=87945 bytes_read=268657 bytes_retransmit=0 bytes_invalid=0 send_seq=6182 receive_seq=6182 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.32 cputime=114.212 memavail=640916 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.594
Stats 2942.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=88022 bytes_read=268875 bytes_retransmit=0 bytes_invalid=0 send_seq=6187 receive_seq=6187 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.7 sysload=0.32 cputime=114.242 memavail=640488 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.763
Stats 2943.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=88104 bytes_read=269114 bytes_retransmit=0 bytes_invalid=0 send_seq=6193 receive_seq=6193 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.1 sysload=0.32 cputime=114.276 memavail=640912 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.652
Stats 2944.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=88165 bytes_read=269327 bytes_retransmit=0 bytes_invalid=0 send_seq=6197 receive_seq=6197 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.6 sysload=0.32 cputime=114.309 memavail=638976 print_time=916.308 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.532
Stats 2945.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=88205 bytes_read=269485 bytes_retransmit=0 bytes_invalid=0 send_seq=6200 receive_seq=6200 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.32 cputime=114.340 memavail=641288 print_time=1204.888 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.1 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1965459056: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:54:07 2024 (1713290047.2 2946.7)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.000004
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.85
stealthchop_threshold = 0

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1964810280: New connection
webhooks client 1964810280: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 2953.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2422 bytes_read=5729 bytes_retransmit=0 bytes_invalid=0 send_seq=201 receive_seq=200 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72005705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.5 sysload=0.35 cputime=118.830 memavail=634484 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.1 pwm=0.000
Stats 2954.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2443 bytes_read=5902 bytes_retransmit=0 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72005588  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.35 cputime=118.882 memavail=639836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.7 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1964810280
webhooks: registering remote method 'reboot_machine' for connection id: 1964810280
webhooks: registering remote method 'pause_job_queue' for connection id: 1964810280
webhooks: registering remote method 'start_job_queue' for connection id: 1964810280
Stats 2955.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2449 bytes_read=6079 bytes_retransmit=0 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003764  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.35 cputime=118.973 memavail=637096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.2 pwm=0.000
Stats 2956.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2455 bytes_read=6227 bytes_retransmit=0 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003091  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.7 sysload=0.32 cputime=119.000 memavail=637956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.6 pwm=0.000
Stats 2957.5: gcodein=0  mcu: mcu_awake=0.009 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2461 bytes_read=6390 bytes_retransmit=0 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002860  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.0 sysload=0.32 cputime=119.027 memavail=637032 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.3 pwm=0.000
Stats 2958.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2467 bytes_read=6581 bytes_retransmit=0 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002865  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.32 cputime=119.055 memavail=636584 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=207.0 pwm=0.000
Stats 2959.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2489 bytes_read=6734 bytes_retransmit=0 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72003042  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=32.5 sysload=0.32 cputime=119.082 memavail=640300 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.5 pwm=0.963
Stats 2960.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2495 bytes_read=6897 bytes_retransmit=0 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002803  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.3 sysload=0.32 cputime=119.108 memavail=637952 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=204.3 pwm=0.963
Stats 2961.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2501 bytes_read=7074 bytes_retransmit=0 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002977  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.29 cputime=119.135 memavail=637504 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.9 pwm=0.963
Stats 2962.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=2507 bytes_read=7222 bytes_retransmit=0 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002886  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.29 cputime=119.162 memavail=636804 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.7 pwm=0.963
Stats 2963.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2529 bytes_read=7404 bytes_retransmit=0 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002797  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.29 cputime=119.190 memavail=641704 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=200.7 pwm=1.000
Stats 2964.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2535 bytes_read=7581 bytes_retransmit=0 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.29 cputime=119.213 memavail=640840 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.9 pwm=1.000
Stats 2965.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2541 bytes_read=7729 bytes_retransmit=0 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.29 cputime=119.236 memavail=640412 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.7 pwm=1.000
Stats 2966.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2547 bytes_read=7892 bytes_retransmit=0 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002632  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.4 sysload=0.27 cputime=119.262 memavail=641236 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.4 pwm=1.000
Stats 2967.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2553 bytes_read=8069 bytes_retransmit=0 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.7 sysload=0.27 cputime=119.290 memavail=640060 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.4 pwm=1.000
Stats 2968.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2575 bytes_read=8236 bytes_retransmit=0 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.27 cputime=119.318 memavail=638884 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.6 pwm=1.000
Stats 2969.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2619 bytes_read=8409 bytes_retransmit=0 bytes_invalid=0 send_seq=224 receive_seq=223 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.27 cputime=119.340 memavail=640980 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.7 pwm=1.000
Stats 2970.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2668 bytes_read=8612 bytes_retransmit=0 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002611  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.1 sysload=0.27 cputime=119.365 memavail=640508 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=200.4 pwm=0.925
Stats 2971.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2706 bytes_read=8770 bytes_retransmit=0 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.33 cputime=119.392 memavail=640508 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=200.9 pwm=0.793
Stats 2972.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2760 bytes_read=8948 bytes_retransmit=0 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.33 cputime=119.421 memavail=639836 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.6 pwm=0.702
Stats 2973.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2814 bytes_read=9154 bytes_retransmit=0 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.33 cputime=119.450 memavail=640792 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.4 pwm=0.669
Stats 2974.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2820 bytes_read=9302 bytes_retransmit=0 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.6 sysload=0.33 cputime=119.473 memavail=640668 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.9 pwm=0.669
Stats 2975.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2858 bytes_read=9475 bytes_retransmit=0 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=31.0 sysload=0.33 cputime=119.499 memavail=640032 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=203.4 pwm=0.708
Stats 2976.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2912 bytes_read=9667 bytes_retransmit=0 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.30 cputime=119.527 memavail=639780 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=204.1 pwm=0.664
Stats 2977.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2918 bytes_read=9815 bytes_retransmit=0 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=27.0 sysload=0.30 cputime=119.554 memavail=639780 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=204.6 pwm=0.664
Stats 2978.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2940 bytes_read=10012 bytes_retransmit=0 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002648  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.30 cputime=119.583 memavail=641504 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.1 pwm=0.609
Stats 2979.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2994 bytes_read=10189 bytes_retransmit=0 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002638  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.5 sysload=0.30 cputime=119.604 memavail=641264 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.5 pwm=0.664
Stats 2980.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3016 bytes_read=10342 bytes_retransmit=0 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002640  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.6 sysload=0.30 cputime=119.627 memavail=640784 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.8 pwm=0.723
Stats 2981.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3054 bytes_read=10530 bytes_retransmit=0 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002636  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.28 cputime=119.656 memavail=640560 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.0 pwm=0.684
Stats 2982.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3092 bytes_read=10702 bytes_retransmit=0 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.28 cputime=119.686 memavail=640584 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.4 pwm=0.677
Stats 2983.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3130 bytes_read=10874 bytes_retransmit=0 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.28 cputime=119.716 memavail=641124 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.8 pwm=0.620
Stats 2984.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3179 bytes_read=11062 bytes_retransmit=0 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.9 sysload=0.28 cputime=119.744 memavail=641056 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.9 pwm=0.746
Stats 2985.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3233 bytes_read=11239 bytes_retransmit=0 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.5 sysload=0.28 cputime=119.768 memavail=640580 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=207.2 pwm=0.720
Stats 2986.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3255 bytes_read=11392 bytes_retransmit=0 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.1 sysload=0.25 cputime=119.796 memavail=640356 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=207.5 pwm=0.623
Stats 2987.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3277 bytes_read=11575 bytes_retransmit=0 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.25 cputime=119.823 memavail=640356 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=207.9 pwm=0.564
Stats 2988.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3347 bytes_read=11771 bytes_retransmit=0 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002652  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.25 cputime=119.853 memavail=640356 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=207.8 pwm=0.710
Stats 2989.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3385 bytes_read=11929 bytes_retransmit=0 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.1 sysload=0.25 cputime=119.877 memavail=641152 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.1 pwm=0.634
Stats 2990.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3423 bytes_read=12117 bytes_retransmit=0 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002639  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=28.1 sysload=0.25 cputime=119.901 memavail=640704 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.2 pwm=0.639
Stats 2991.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3477 bytes_read=12294 bytes_retransmit=0 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002637  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=27.9 sysload=0.23 cputime=119.930 memavail=640992 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.1 pwm=0.806
Stats 2992.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3515 bytes_read=12452 bytes_retransmit=0 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002635  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.1 sysload=0.23 cputime=119.957 memavail=640736 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.7 pwm=0.501
Stats 2993.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3553 bytes_read=12654 bytes_retransmit=0 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002632  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.8 sysload=0.23 cputime=119.988 memavail=639024 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.5 pwm=0.701
Stats 2994.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3591 bytes_read=12826 bytes_retransmit=0 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.23 cputime=120.017 memavail=641060 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.8 pwm=0.650
Stats 2995.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3629 bytes_read=12984 bytes_retransmit=0 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.23 cputime=120.046 memavail=640580 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=208.9 pwm=0.572
Stats 2996.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3667 bytes_read=13172 bytes_retransmit=0 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.5 sysload=0.21 cputime=120.077 memavail=639084 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.0 pwm=0.620
Stats 2997.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3721 bytes_read=13349 bytes_retransmit=0 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=54.2 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.3 sysload=0.21 cputime=120.105 memavail=638860 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.2 pwm=0.647
Stats 2998.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3727 bytes_read=13511 bytes_retransmit=0 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.21 cputime=120.132 memavail=641068 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.3 pwm=0.647
Stats 2999.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3765 bytes_read=13699 bytes_retransmit=0 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.4 sysload=0.21 cputime=120.157 memavail=640456 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.614
Stats 3000.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3803 bytes_read=13871 bytes_retransmit=0 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.3 sysload=0.21 cputime=120.182 memavail=639268 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.543
Stats 3001.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3841 bytes_read=14029 bytes_retransmit=0 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=33.9 sysload=0.20 cputime=120.212 memavail=638820 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.569
Stats 3002.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3863 bytes_read=14212 bytes_retransmit=0 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.20 cputime=120.240 memavail=638372 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.619
Stats 3003.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3869 bytes_read=14388 bytes_retransmit=0 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.0 sysload=0.20 cputime=120.267 memavail=641040 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.619
Stats 3004.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3875 bytes_read=14536 bytes_retransmit=0 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002670  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=27.9 sysload=0.20 cputime=120.290 memavail=641208 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.619
Stats 3005.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3913 bytes_read=14724 bytes_retransmit=0 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.20 cputime=120.314 memavail=640960 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.614
Stats 3006.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3951 bytes_read=14893 bytes_retransmit=0 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=120.341 memavail=639756 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.524
Stats 3007.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4005 bytes_read=15046 bytes_retransmit=0 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.18 cputime=120.369 memavail=640504 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.609
Stats 3008.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4027 bytes_read=15231 bytes_retransmit=0 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.9 sysload=0.18 cputime=120.398 memavail=639964 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.717
Stats 3009.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4065 bytes_read=15392 bytes_retransmit=0 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.0 sysload=0.18 cputime=120.421 memavail=640776 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.585
Stats 3010.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4103 bytes_read=15546 bytes_retransmit=0 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.2 sysload=0.18 cputime=120.446 memavail=640048 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.806
Stats 3011.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4157 bytes_read=15739 bytes_retransmit=0 bytes_invalid=0 send_seq=345 receive_seq=345 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.5 sysload=0.17 cputime=120.475 memavail=639348 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.546
Stats 3012.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4195 bytes_read=15911 bytes_retransmit=0 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.17 cputime=120.503 memavail=640700 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.527
Stats 3013.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4249 bytes_read=16088 bytes_retransmit=0 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.9 sysload=0.17 cputime=120.532 memavail=641436 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.615
Stats 3014.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4271 bytes_read=16271 bytes_retransmit=0 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.17 cputime=120.559 memavail=640776 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.510
Stats 3015.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4341 bytes_read=16453 bytes_retransmit=0 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.9 sysload=0.17 cputime=120.590 memavail=638764 print_time=11.406 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.499
Stats 3016.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5050 bytes_read=16929 bytes_retransmit=0 bytes_invalid=0 send_seq=384 receive_seq=384 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.15 cputime=120.706 memavail=640348 print_time=88.810 buffer_time=20.081 print_stall=0 extruder: target=210 temp=210.0 pwm=0.680
Stats 3017.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5100 bytes_read=17158 bytes_retransmit=0 bytes_invalid=0 send_seq=388 receive_seq=388 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.15 cputime=120.744 memavail=639892 print_time=88.810 buffer_time=19.080 print_stall=0 extruder: target=210 temp=210.2 pwm=0.628
Stats 3018.5: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=5166 bytes_read=17376 bytes_retransmit=0 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=32.6 sysload=0.15 cputime=120.778 memavail=641368 print_time=88.810 buffer_time=18.080 print_stall=0 extruder: target=210 temp=210.0 pwm=0.605
Stats 3019.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=5232 bytes_read=17595 bytes_retransmit=0 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002666  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.8 sysload=0.15 cputime=120.809 memavail=640376 print_time=88.810 buffer_time=17.080 print_stall=0 extruder: target=210 temp=210.1 pwm=0.631
Stats 3020.5: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=5282 bytes_read=17824 bytes_retransmit=0 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=26.1 sysload=0.15 cputime=120.839 memavail=639900 print_time=88.810 buffer_time=16.079 print_stall=0 extruder: target=210 temp=209.9 pwm=0.726
Stats 3021.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=5359 bytes_read=18042 bytes_retransmit=0 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.14 cputime=120.872 memavail=637952 print_time=88.810 buffer_time=15.078 print_stall=0 extruder: target=210 temp=209.7 pwm=0.773
Stats 3022.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=5393 bytes_read=18236 bytes_retransmit=0 bytes_invalid=0 send_seq=410 receive_seq=410 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.4 sysload=0.14 cputime=120.904 memavail=639152 print_time=88.810 buffer_time=14.077 print_stall=0 extruder: target=210 temp=209.6 pwm=0.773
Stats 3023.6: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000014 bytes_write=5454 bytes_read=18465 bytes_retransmit=0 bytes_invalid=0 send_seq=414 receive_seq=414 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.14 cputime=120.938 memavail=637692 print_time=88.810 buffer_time=13.076 print_stall=0 extruder: target=210 temp=209.1 pwm=0.908
Stats 3024.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5547 bytes_read=18702 bytes_retransmit=0 bytes_invalid=0 send_seq=420 receive_seq=420 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002664  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.8 sysload=0.14 cputime=120.968 memavail=639836 print_time=88.810 buffer_time=12.076 print_stall=0 extruder: target=210 temp=209.2 pwm=0.724
Stats 3025.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5629 bytes_read=18911 bytes_retransmit=0 bytes_invalid=0 send_seq=426 receive_seq=426 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.14 cputime=120.996 memavail=638576 print_time=88.810 buffer_time=11.075 print_stall=0 extruder: target=210 temp=208.9 pwm=0.867
Stats 3026.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5695 bytes_read=19145 bytes_retransmit=0 bytes_invalid=0 send_seq=431 receive_seq=431 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.4 sysload=0.13 cputime=121.028 memavail=640616 print_time=88.810 buffer_time=10.074 print_stall=0 extruder: target=210 temp=208.8 pwm=0.951
Stats 3027.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5788 bytes_read=19368 bytes_retransmit=0 bytes_invalid=0 send_seq=437 receive_seq=437 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002662  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.2 sysload=0.13 cputime=121.063 memavail=640112 print_time=88.810 buffer_time=9.073 print_stall=0 extruder: target=210 temp=208.7 pwm=0.911
Stats 3028.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5870 bytes_read=19577 bytes_retransmit=0 bytes_invalid=0 send_seq=443 receive_seq=443 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.0 sysload=0.13 cputime=121.095 memavail=639188 print_time=88.810 buffer_time=8.072 print_stall=0 extruder: target=210 temp=208.9 pwm=0.705
Stats 3029.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5952 bytes_read=19830 bytes_retransmit=0 bytes_invalid=0 send_seq=449 receive_seq=449 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002658  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.13 cputime=121.125 memavail=640880 print_time=88.810 buffer_time=7.071 print_stall=0 extruder: target=210 temp=208.8 pwm=0.770
Stats 3030.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6034 bytes_read=20053 bytes_retransmit=0 bytes_invalid=0 send_seq=455 receive_seq=455 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.13 cputime=121.155 memavail=639956 print_time=88.810 buffer_time=6.071 print_stall=0 extruder: target=210 temp=209.2 pwm=0.545
Stats 3031.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6122 bytes_read=20278 bytes_retransmit=0 bytes_invalid=0 send_seq=462 receive_seq=462 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.0 sysload=0.12 cputime=121.189 memavail=641036 print_time=88.810 buffer_time=5.070 print_stall=0 extruder: target=210 temp=208.8 pwm=0.855
Stats 3032.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6204 bytes_read=20531 bytes_retransmit=0 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.4 sysload=0.12 cputime=121.223 memavail=640312 print_time=88.810 buffer_time=4.069 print_stall=0 extruder: target=210 temp=208.8 pwm=0.818
Stats 3033.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6297 bytes_read=20740 bytes_retransmit=0 bytes_invalid=0 send_seq=474 receive_seq=474 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002656  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.2 sysload=0.12 cputime=121.258 memavail=638376 print_time=88.810 buffer_time=3.068 print_stall=0 extruder: target=210 temp=208.9 pwm=0.839
Stats 3034.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6379 bytes_read=20963 bytes_retransmit=0 bytes_invalid=0 send_seq=480 receive_seq=480 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002655  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.7 sysload=0.12 cputime=121.288 memavail=641112 print_time=88.810 buffer_time=2.068 print_stall=0 extruder: target=210 temp=209.5 pwm=0.492
Stats 3035.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6445 bytes_read=21211 bytes_retransmit=0 bytes_invalid=0 send_seq=485 receive_seq=485 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002657  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.7 sysload=0.12 cputime=121.321 memavail=640412 print_time=88.810 buffer_time=1.066 print_stall=0 extruder: target=210 temp=209.3 pwm=0.663
Stats 3036.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6553 bytes_read=21415 bytes_retransmit=0 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.7 sysload=0.11 cputime=121.355 memavail=639740 print_time=88.810 buffer_time=0.066 print_stall=0 extruder: target=210 temp=209.0 pwm=0.868
Stats 3037.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6619 bytes_read=21619 bytes_retransmit=0 bytes_invalid=0 send_seq=495 receive_seq=495 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.4 sysload=0.11 cputime=121.388 memavail=639516 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.4 pwm=0.730
Stats 3038.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6701 bytes_read=21872 bytes_retransmit=0 bytes_invalid=0 send_seq=501 receive_seq=501 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002661  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.11 cputime=121.423 memavail=641424 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.619
Stats 3039.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6794 bytes_read=22095 bytes_retransmit=0 bytes_invalid=0 send_seq=507 receive_seq=507 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=28.8 sysload=0.11 cputime=121.452 memavail=640712 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.767
Stats 3040.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6860 bytes_read=22299 bytes_retransmit=0 bytes_invalid=0 send_seq=512 receive_seq=512 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=26.7 sysload=0.11 cputime=121.482 memavail=639760 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.786
Stats 3041.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6910 bytes_read=22542 bytes_retransmit=0 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002660  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.3 sysload=0.10 cputime=121.517 memavail=639312 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.619
Stats 3042.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6971 bytes_read=22741 bytes_retransmit=0 bytes_invalid=0 send_seq=520 receive_seq=520 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.9 sysload=0.10 cputime=121.549 memavail=640460 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.697
Stats 3043.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7048 bytes_read=22945 bytes_retransmit=0 bytes_invalid=0 send_seq=525 receive_seq=525 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.5 sysload=0.10 cputime=121.582 memavail=640460 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.694
Stats 3044.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7130 bytes_read=23212 bytes_retransmit=0 bytes_invalid=0 send_seq=531 receive_seq=531 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002669  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.9 sysload=0.10 cputime=121.612 memavail=640520 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.458
Stats 3045.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7191 bytes_read=23411 bytes_retransmit=0 bytes_invalid=0 send_seq=535 receive_seq=535 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.10 cputime=121.640 memavail=640264 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.568
Stats 3046.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7273 bytes_read=23620 bytes_retransmit=0 bytes_invalid=0 send_seq=541 receive_seq=541 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002668  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.7 sysload=0.09 cputime=121.677 memavail=639816 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.499
Stats 3047.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7334 bytes_read=23863 bytes_retransmit=0 bytes_invalid=0 send_seq=545 receive_seq=545 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002673  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.5 sysload=0.09 cputime=121.714 memavail=639592 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.533
Stats 3048.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7427 bytes_read=24072 bytes_retransmit=0 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.09 cputime=121.751 memavail=639368 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.636
Stats 3049.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7509 bytes_read=24295 bytes_retransmit=0 bytes_invalid=0 send_seq=557 receive_seq=557 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002672  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.09 cputime=121.783 memavail=640300 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.540
Stats 3050.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7559 bytes_read=24538 bytes_retransmit=0 bytes_invalid=0 send_seq=561 receive_seq=561 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.09 cputime=121.814 memavail=639376 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.569
Stats 3051.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7636 bytes_read=24742 bytes_retransmit=0 bytes_invalid=0 send_seq=566 receive_seq=566 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.9 sysload=0.08 cputime=121.846 memavail=640856 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.530
Stats 3052.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7702 bytes_read=24946 bytes_retransmit=0 bytes_invalid=0 send_seq=571 receive_seq=571 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.3 sysload=0.08 cputime=121.879 memavail=640164 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.706
Stats 3053.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7784 bytes_read=25199 bytes_retransmit=0 bytes_invalid=0 send_seq=577 receive_seq=577 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.08 cputime=121.917 memavail=638424 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.698
Stats 3054.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7856 bytes_read=25412 bytes_retransmit=0 bytes_invalid=0 send_seq=581 receive_seq=581 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.08 cputime=121.944 memavail=640964 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.774
Stats 3055.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7906 bytes_read=25611 bytes_retransmit=0 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.0 sysload=0.08 cputime=121.968 memavail=632036 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.586
Stats 3056.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7956 bytes_read=25854 bytes_retransmit=0 bytes_invalid=0 send_seq=589 receive_seq=589 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.08 cputime=121.990 memavail=633320 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.704
Stats 3057.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8049 bytes_read=26063 bytes_retransmit=0 bytes_invalid=0 send_seq=595 receive_seq=595 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.08 cputime=122.019 memavail=633128 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.444
Stats 3058.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8115 bytes_read=26267 bytes_retransmit=0 bytes_invalid=0 send_seq=600 receive_seq=600 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002675  raspberry_pi: temp=55.3 heater_bed: target=0 temp=23.0 pwm=0.000 mcu_temp: temp=30.6 sysload=0.08 cputime=122.051 memavail=638468 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.534
Stats 3059.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8197 bytes_read=26534 bytes_retransmit=0 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002674  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.08 cputime=122.081 memavail=640904 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.787
Stats 3060.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8274 bytes_read=26738 bytes_retransmit=0 bytes_invalid=0 send_seq=611 receive_seq=611 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.0 sysload=0.08 cputime=122.110 memavail=640696 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.652
Stats 3061.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8351 bytes_read=26957 bytes_retransmit=0 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.07 cputime=122.144 memavail=640220 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.535
Stats 3062.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8433 bytes_read=27195 bytes_retransmit=0 bytes_invalid=0 send_seq=622 receive_seq=622 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.07 cputime=122.178 memavail=639976 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.651
Stats 3063.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8515 bytes_read=27404 bytes_retransmit=0 bytes_invalid=0 send_seq=628 receive_seq=628 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.07 cputime=122.211 memavail=638292 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.658
Stats 3064.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8565 bytes_read=27632 bytes_retransmit=0 bytes_invalid=0 send_seq=632 receive_seq=632 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.07 cputime=122.239 memavail=641096 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.710
Stats 3065.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8631 bytes_read=27865 bytes_retransmit=0 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.07 cputime=122.272 memavail=639536 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.508
Stats 3066.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8692 bytes_read=28058 bytes_retransmit=0 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.06 cputime=122.310 memavail=639088 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.593
Stats 3067.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8774 bytes_read=28271 bytes_retransmit=0 bytes_invalid=0 send_seq=647 receive_seq=647 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.2 sysload=0.06 cputime=122.349 memavail=638640 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.608
Stats 3068.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8851 bytes_read=28492 bytes_retransmit=0 bytes_invalid=0 send_seq=652 receive_seq=652 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.5 sysload=0.06 cputime=122.384 memavail=639892 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.415
Stats 3069.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8944 bytes_read=28705 bytes_retransmit=0 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.06 cputime=122.413 memavail=640844 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.835
Stats 3070.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9026 bytes_read=28929 bytes_retransmit=0 bytes_invalid=0 send_seq=664 receive_seq=664 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.2 sysload=0.06 cputime=122.442 memavail=640556 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.579
Stats 3071.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9092 bytes_read=29162 bytes_retransmit=0 bytes_invalid=0 send_seq=669 receive_seq=669 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.06 cputime=122.477 memavail=640556 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.550
Stats 3072.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9190 bytes_read=29376 bytes_retransmit=0 bytes_invalid=0 send_seq=676 receive_seq=676 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=27.8 sysload=0.06 cputime=122.511 memavail=640080 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.548
Stats 3073.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9256 bytes_read=29595 bytes_retransmit=0 bytes_invalid=0 send_seq=681 receive_seq=681 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.1 sysload=0.06 cputime=122.541 memavail=638372 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.742
Stats 3074.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9322 bytes_read=29842 bytes_retransmit=0 bytes_invalid=0 send_seq=686 receive_seq=686 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.06 cputime=122.572 memavail=641016 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.563
Stats 3075.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9415 bytes_read=30051 bytes_retransmit=0 bytes_invalid=0 send_seq=692 receive_seq=692 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=31.9 sysload=0.06 cputime=122.600 memavail=640540 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.591
Stats 3076.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9481 bytes_read=30270 bytes_retransmit=0 bytes_invalid=0 send_seq=697 receive_seq=697 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.05 cputime=122.635 memavail=640092 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.720
Stats 3077.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9563 bytes_read=30508 bytes_retransmit=0 bytes_invalid=0 send_seq=703 receive_seq=703 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.4 sysload=0.05 cputime=122.669 memavail=640092 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.598
Stats 3078.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9645 bytes_read=30717 bytes_retransmit=0 bytes_invalid=0 send_seq=709 receive_seq=709 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.0 sysload=0.05 cputime=122.702 memavail=641312 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.565
Stats 3079.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9679 bytes_read=30940 bytes_retransmit=0 bytes_invalid=0 send_seq=712 receive_seq=712 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=30.8 sysload=0.05 cputime=122.733 memavail=641184 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.565
Stats 3080.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9745 bytes_read=31173 bytes_retransmit=0 bytes_invalid=0 send_seq=717 receive_seq=717 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.7 sysload=0.05 cputime=122.763 memavail=640496 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.745
Stats 3081.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9843 bytes_read=31387 bytes_retransmit=0 bytes_invalid=0 send_seq=724 receive_seq=724 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=32.4 sysload=0.05 cputime=122.798 memavail=639796 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.738
Stats 3082.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9920 bytes_read=31606 bytes_retransmit=0 bytes_invalid=0 send_seq=729 receive_seq=729 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.05 cputime=122.834 memavail=639348 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.550
Stats 3083.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9970 bytes_read=31834 bytes_retransmit=0 bytes_invalid=0 send_seq=733 receive_seq=733 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.7 sysload=0.05 cputime=122.870 memavail=637384 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.612
Stats 3084.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10020 bytes_read=32047 bytes_retransmit=0 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.05 cputime=122.903 memavail=640980 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.546
Stats 3085.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10086 bytes_read=32266 bytes_retransmit=0 bytes_invalid=0 send_seq=742 receive_seq=742 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=33.5 sysload=0.05 cputime=122.932 memavail=640056 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.727
Stats 3086.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10152 bytes_read=32499 bytes_retransmit=0 bytes_invalid=0 send_seq=747 receive_seq=747 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.2 sysload=0.05 cputime=122.967 memavail=639832 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.601
Stats 3087.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10234 bytes_read=32708 bytes_retransmit=0 bytes_invalid=0 send_seq=753 receive_seq=753 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.05 cputime=123.000 memavail=641068 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.653
Stats 3088.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10284 bytes_read=32922 bytes_retransmit=0 bytes_invalid=0 send_seq=757 receive_seq=757 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.05 cputime=123.032 memavail=640340 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.529
Stats 3089.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10345 bytes_read=33164 bytes_retransmit=0 bytes_invalid=0 send_seq=761 receive_seq=761 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.05 cputime=123.064 memavail=640736 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.597
Stats 3090.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10427 bytes_read=33373 bytes_retransmit=0 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.4 sysload=0.05 cputime=123.092 memavail=640332 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.684
Stats 3091.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10477 bytes_read=33587 bytes_retransmit=0 bytes_invalid=0 send_seq=771 receive_seq=771 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.04 cputime=123.126 memavail=639856 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.632
Stats 3092.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10544 bytes_read=33815 bytes_retransmit=0 bytes_invalid=0 send_seq=776 receive_seq=775 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.1 sysload=0.04 cputime=123.158 memavail=640552 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.708
Stats 3093.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10610 bytes_read=34035 bytes_retransmit=0 bytes_invalid=0 send_seq=781 receive_seq=781 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.1 sysload=0.04 cputime=123.191 memavail=638616 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.577
Stats 3094.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10692 bytes_read=34273 bytes_retransmit=0 bytes_invalid=0 send_seq=787 receive_seq=787 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.5 sysload=0.04 cputime=123.223 memavail=641028 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.605
Stats 3095.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10726 bytes_read=34496 bytes_retransmit=0 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.7 sysload=0.04 cputime=123.254 memavail=641060 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.605
Stats 3096.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10792 bytes_read=34700 bytes_retransmit=0 bytes_invalid=0 send_seq=795 receive_seq=795 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.20 cputime=123.289 memavail=640580 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.370
Stats 3097.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10842 bytes_read=34914 bytes_retransmit=0 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=123.323 memavail=639880 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.663
Stats 3098.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10924 bytes_read=35152 bytes_retransmit=0 bytes_invalid=0 send_seq=805 receive_seq=805 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.20 cputime=123.359 memavail=639432 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.468
Stats 3099.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11006 bytes_read=35375 bytes_retransmit=0 bytes_invalid=0 send_seq=811 receive_seq=811 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=28.5 sysload=0.20 cputime=123.388 memavail=641196 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.575
Stats 3100.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11088 bytes_read=35599 bytes_retransmit=0 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=123.417 memavail=640884 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.702
Stats 3101.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11154 bytes_read=35827 bytes_retransmit=0 bytes_invalid=0 send_seq=822 receive_seq=821 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.6 sysload=0.26 cputime=123.452 memavail=640760 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.647
Stats 3102.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11188 bytes_read=36026 bytes_retransmit=0 bytes_invalid=0 send_seq=825 receive_seq=825 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=24.9 sysload=0.26 cputime=123.489 memavail=639844 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.647
Stats 3103.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11270 bytes_read=36250 bytes_retransmit=0 bytes_invalid=0 send_seq=831 receive_seq=831 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.5 sysload=0.26 cputime=123.526 memavail=638776 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.726
Stats 3104.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11331 bytes_read=36487 bytes_retransmit=0 bytes_invalid=0 send_seq=835 receive_seq=834 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=28.9 sysload=0.26 cputime=123.560 memavail=640372 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.582
Stats 3105.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11413 bytes_read=36701 bytes_retransmit=0 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.26 cputime=123.596 memavail=639708 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.494
Stats 3106.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11474 bytes_read=36915 bytes_retransmit=0 bytes_invalid=0 send_seq=845 receive_seq=845 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=28.3 sysload=0.32 cputime=123.633 memavail=639008 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.548
Stats 3107.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11524 bytes_read=37143 bytes_retransmit=0 bytes_invalid=0 send_seq=849 receive_seq=849 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.32 cputime=123.666 memavail=639460 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.645
Stats 3108.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11606 bytes_read=37352 bytes_retransmit=0 bytes_invalid=0 send_seq=855 receive_seq=855 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.8 sysload=0.32 cputime=123.700 memavail=638228 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.768
Stats 3109.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11688 bytes_read=37590 bytes_retransmit=0 bytes_invalid=0 send_seq=861 receive_seq=861 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.32 cputime=123.730 memavail=640664 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.452
Stats 3110.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11781 bytes_read=37828 bytes_retransmit=0 bytes_invalid=0 send_seq=867 receive_seq=867 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.5 sysload=0.32 cputime=123.760 memavail=638300 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.649
Stats 3111.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11831 bytes_read=38027 bytes_retransmit=0 bytes_invalid=0 send_seq=871 receive_seq=871 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=30.4 sysload=0.38 cputime=123.792 memavail=638084 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.539
Stats 3112.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11881 bytes_read=38241 bytes_retransmit=0 bytes_invalid=0 send_seq=875 receive_seq=875 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.38 cputime=123.824 memavail=639340 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.761
Stats 3113.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11937 bytes_read=38464 bytes_retransmit=0 bytes_invalid=0 send_seq=878 receive_seq=878 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.4 sysload=0.38 cputime=123.857 memavail=637184 print_time=88.810 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.615
Stats 3114.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12372 bytes_read=38712 bytes_retransmit=0 bytes_invalid=0 send_seq=889 receive_seq=889 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=16 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.38 cputime=123.930 memavail=639848 print_time=187.001 buffer_time=20.200 print_stall=0 extruder: target=210 temp=210.1 pwm=0.543
Stats 3115.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12438 bytes_read=38941 bytes_retransmit=0 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.38 cputime=123.968 memavail=640412 print_time=187.001 buffer_time=19.199 print_stall=0 extruder: target=210 temp=209.7 pwm=0.803
Stats 3116.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12483 bytes_read=39149 bytes_retransmit=0 bytes_invalid=0 send_seq=896 receive_seq=896 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.5 sysload=0.43 cputime=124.004 memavail=640300 print_time=187.001 buffer_time=18.199 print_stall=0 extruder: target=210 temp=209.9 pwm=0.616
Stats 3117.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12565 bytes_read=39358 bytes_retransmit=0 bytes_invalid=0 send_seq=902 receive_seq=902 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.8 sysload=0.43 cputime=124.039 memavail=639376 print_time=187.001 buffer_time=17.199 print_stall=0 extruder: target=210 temp=209.9 pwm=0.702
Stats 3118.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12615 bytes_read=39587 bytes_retransmit=0 bytes_invalid=0 send_seq=906 receive_seq=906 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002701  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.43 cputime=124.077 memavail=640004 print_time=187.001 buffer_time=16.198 print_stall=0 extruder: target=210 temp=210.0 pwm=0.610
Stats 3119.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=12708 bytes_read=39825 bytes_retransmit=0 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.43 cputime=124.110 memavail=639900 print_time=187.001 buffer_time=15.197 print_stall=0 extruder: target=210 temp=209.5 pwm=0.872
Stats 3120.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=12774 bytes_read=40029 bytes_retransmit=0 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.9 sysload=0.43 cputime=124.138 memavail=639880 print_time=187.001 buffer_time=14.196 print_stall=0 extruder: target=210 temp=209.6 pwm=0.680
Stats 3121.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=12840 bytes_read=40263 bytes_retransmit=0 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=0 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.3 sysload=0.39 cputime=124.172 memavail=639152 print_time=187.001 buffer_time=13.195 print_stall=0 extruder: target=210 temp=209.5 pwm=0.682
Stats 3122.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=12933 bytes_read=40486 bytes_retransmit=0 bytes_invalid=0 send_seq=928 receive_seq=928 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=25.6 sysload=0.39 cputime=124.206 memavail=638652 print_time=187.001 buffer_time=12.195 print_stall=0 extruder: target=210 temp=209.2 pwm=0.704
Stats 3123.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=13015 bytes_read=40695 bytes_retransmit=0 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.0 sysload=0.39 cputime=124.239 memavail=637684 print_time=187.001 buffer_time=11.194 print_stall=0 extruder: target=210 temp=208.7 pwm=0.949
Stats 3124.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13097 bytes_read=40948 bytes_retransmit=0 bytes_invalid=0 send_seq=940 receive_seq=940 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.8 sysload=0.39 cputime=124.269 memavail=641160 print_time=187.001 buffer_time=10.194 print_stall=0 extruder: target=210 temp=208.4 pwm=1.000
Stats 3125.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13190 bytes_read=41170 bytes_retransmit=0 bytes_invalid=0 send_seq=946 receive_seq=946 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.39 cputime=124.298 memavail=640684 print_time=187.001 buffer_time=9.193 print_stall=0 extruder: target=210 temp=208.7 pwm=0.741
Stats 3126.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13256 bytes_read=41364 bytes_retransmit=0 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.36 cputime=124.330 memavail=641048 print_time=187.001 buffer_time=8.192 print_stall=0 extruder: target=210 temp=208.8 pwm=0.632
Stats 3127.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13333 bytes_read=41586 bytes_retransmit=0 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=28.7 sysload=0.36 cputime=124.365 memavail=640600 print_time=187.001 buffer_time=7.191 print_stall=0 extruder: target=210 temp=208.4 pwm=0.914
Stats 3128.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13426 bytes_read=41798 bytes_retransmit=0 bytes_invalid=0 send_seq=962 receive_seq=962 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.36 cputime=124.401 memavail=641580 print_time=187.001 buffer_time=6.190 print_stall=0 extruder: target=210 temp=208.5 pwm=0.811
Stats 3129.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13508 bytes_read=42014 bytes_retransmit=0 bytes_invalid=0 send_seq=968 receive_seq=968 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.9 sysload=0.36 cputime=124.432 memavail=640896 print_time=187.001 buffer_time=5.189 print_stall=0 extruder: target=210 temp=208.5 pwm=0.866
Stats 3130.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13590 bytes_read=42253 bytes_retransmit=0 bytes_invalid=0 send_seq=974 receive_seq=974 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.36 cputime=124.461 memavail=640392 print_time=187.001 buffer_time=4.189 print_stall=0 extruder: target=210 temp=208.9 pwm=0.668
Stats 3131.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13662 bytes_read=42466 bytes_retransmit=0 bytes_invalid=0 send_seq=978 receive_seq=978 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.33 cputime=124.493 memavail=640392 print_time=187.001 buffer_time=3.189 print_stall=0 extruder: target=210 temp=208.8 pwm=0.746
Stats 3132.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13728 bytes_read=42670 bytes_retransmit=0 bytes_invalid=0 send_seq=983 receive_seq=983 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.33 cputime=124.525 memavail=640436 print_time=187.001 buffer_time=2.187 print_stall=0 extruder: target=210 temp=208.9 pwm=0.792
Stats 3133.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13810 bytes_read=42909 bytes_retransmit=0 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.33 cputime=124.558 memavail=641408 print_time=187.001 buffer_time=1.186 print_stall=0 extruder: target=210 temp=209.1 pwm=0.716
Stats 3134.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13880 bytes_read=43136 bytes_retransmit=0 bytes_invalid=0 send_seq=993 receive_seq=993 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=26.6 sysload=0.33 cputime=124.586 memavail=640756 print_time=187.001 buffer_time=0.186 print_stall=0 extruder: target=210 temp=209.1 pwm=0.716
Stats 3135.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13930 bytes_read=43335 bytes_retransmit=0 bytes_invalid=0 send_seq=997 receive_seq=997 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=31.5 sysload=0.33 cputime=124.615 memavail=640708 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.3 pwm=0.655
Stats 3136.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=13996 bytes_read=43569 bytes_retransmit=0 bytes_invalid=0 send_seq=1002 receive_seq=1002 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.2 sysload=0.31 cputime=124.647 memavail=640676 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.3 pwm=0.733
Stats 3137.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14073 bytes_read=43787 bytes_retransmit=0 bytes_invalid=0 send_seq=1007 receive_seq=1007 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=25.4 sysload=0.31 cputime=124.678 memavail=640172 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.5 pwm=0.657
Stats 3138.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14150 bytes_read=43991 bytes_retransmit=0 bytes_invalid=0 send_seq=1012 receive_seq=1012 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.2 sysload=0.31 cputime=124.710 memavail=640176 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.595
Stats 3139.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=14216 bytes_read=44239 bytes_retransmit=0 bytes_invalid=0 send_seq=1017 receive_seq=1017 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.31 cputime=124.740 memavail=640852 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.765
Stats 3140.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=14277 bytes_read=44452 bytes_retransmit=0 bytes_invalid=0 send_seq=1021 receive_seq=1021 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=31.2 sysload=0.31 cputime=124.770 memavail=639900 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.477
Stats 3141.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=14327 bytes_read=44651 bytes_retransmit=0 bytes_invalid=0 send_seq=1025 receive_seq=1025 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.28 cputime=124.800 memavail=639452 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.621
Stats 3142.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=14377 bytes_read=44880 bytes_retransmit=0 bytes_invalid=0 send_seq=1029 receive_seq=1029 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.0 sysload=0.28 cputime=124.832 memavail=639228 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.506
Stats 3143.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=14470 bytes_read=45103 bytes_retransmit=0 bytes_invalid=0 send_seq=1035 receive_seq=1035 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=27.6 sysload=0.28 cputime=124.865 memavail=637012 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.351
Stats 3144.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14520 bytes_read=45316 bytes_retransmit=0 bytes_invalid=0 send_seq=1039 receive_seq=1039 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.0 sysload=0.28 cputime=124.892 memavail=640952 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.580
Stats 3145.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14597 bytes_read=45550 bytes_retransmit=0 bytes_invalid=0 send_seq=1044 receive_seq=1044 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.28 cputime=124.924 memavail=640252 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.570
Stats 3146.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14674 bytes_read=45768 bytes_retransmit=0 bytes_invalid=0 send_seq=1049 receive_seq=1049 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.8 sysload=0.26 cputime=124.960 memavail=639552 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.488
Stats 3147.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14724 bytes_read=45967 bytes_retransmit=0 bytes_invalid=0 send_seq=1053 receive_seq=1053 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.26 cputime=124.993 memavail=639552 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.563
Stats 3148.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14790 bytes_read=46201 bytes_retransmit=0 bytes_invalid=0 send_seq=1058 receive_seq=1058 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.8 sysload=0.26 cputime=125.030 memavail=641732 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.588
Stats 3149.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14872 bytes_read=46438 bytes_retransmit=0 bytes_invalid=0 send_seq=1064 receive_seq=1064 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.4 sysload=0.26 cputime=125.061 memavail=640780 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.589
Stats 3150.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14938 bytes_read=46642 bytes_retransmit=0 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.7 sysload=0.26 cputime=125.091 memavail=640304 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.2 pwm=0.423
Stats 3151.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=14988 bytes_read=46871 bytes_retransmit=0 bytes_invalid=0 send_seq=1073 receive_seq=1073 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.40 cputime=125.125 memavail=640712 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.685
Stats 3152.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15054 bytes_read=47089 bytes_retransmit=0 bytes_invalid=0 send_seq=1078 receive_seq=1078 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.40 cputime=125.160 memavail=639256 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.726
Stats 3153.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15104 bytes_read=47288 bytes_retransmit=0 bytes_invalid=0 send_seq=1082 receive_seq=1082 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.7 sysload=0.40 cputime=125.192 memavail=637576 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.477
Stats 3154.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15176 bytes_read=47552 bytes_retransmit=0 bytes_invalid=0 send_seq=1088 receive_seq=1088 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.40 cputime=125.223 memavail=640828 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.566
Stats 3155.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15242 bytes_read=47770 bytes_retransmit=0 bytes_invalid=0 send_seq=1093 receive_seq=1093 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.40 cputime=125.254 memavail=640188 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.752
Stats 3156.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15324 bytes_read=47979 bytes_retransmit=0 bytes_invalid=0 send_seq=1099 receive_seq=1099 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.4 sysload=0.37 cputime=125.288 memavail=641436 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.420
Stats 3157.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15390 bytes_read=48213 bytes_retransmit=0 bytes_invalid=0 send_seq=1104 receive_seq=1104 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.37 cputime=125.320 memavail=640476 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.693
Stats 3158.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15467 bytes_read=48431 bytes_retransmit=0 bytes_invalid=0 send_seq=1109 receive_seq=1109 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.37 cputime=125.353 memavail=640252 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.355
Stats 3159.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15549 bytes_read=48654 bytes_retransmit=0 bytes_invalid=0 send_seq=1115 receive_seq=1115 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.37 cputime=125.381 memavail=640924 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.720
Stats 3160.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15615 bytes_read=48888 bytes_retransmit=0 bytes_invalid=0 send_seq=1120 receive_seq=1120 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.3 sysload=0.37 cputime=125.411 memavail=639972 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.750
Stats 3161.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15708 bytes_read=49111 bytes_retransmit=0 bytes_invalid=0 send_seq=1126 receive_seq=1126 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.34 cputime=125.447 memavail=639300 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.562
Stats 3162.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15774 bytes_read=49315 bytes_retransmit=0 bytes_invalid=0 send_seq=1131 receive_seq=1131 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.0 sysload=0.34 cputime=125.479 memavail=640728 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.588
Stats 3163.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15824 bytes_read=49544 bytes_retransmit=0 bytes_invalid=0 send_seq=1135 receive_seq=1135 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=31.3 sysload=0.34 cputime=125.513 memavail=638488 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.706
Stats 3164.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15885 bytes_read=49771 bytes_retransmit=0 bytes_invalid=0 send_seq=1139 receive_seq=1139 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.7 sysload=0.34 cputime=125.540 memavail=640748 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.612
Stats 3165.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15951 bytes_read=49975 bytes_retransmit=0 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.34 cputime=125.568 memavail=640048 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.624
Stats 3166.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16033 bytes_read=50214 bytes_retransmit=0 bytes_invalid=0 send_seq=1150 receive_seq=1150 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.6 sysload=0.31 cputime=125.601 memavail=639824 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.605
Stats 3167.6: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16110 bytes_read=50432 bytes_retransmit=0 bytes_invalid=0 send_seq=1155 receive_seq=1155 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.8 sysload=0.31 cputime=125.636 memavail=640080 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.693
Stats 3168.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16160 bytes_read=50631 bytes_retransmit=0 bytes_invalid=0 send_seq=1159 receive_seq=1159 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.31 cputime=125.670 memavail=641076 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.582
Stats 3169.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16237 bytes_read=50879 bytes_retransmit=0 bytes_invalid=0 send_seq=1164 receive_seq=1164 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.31 cputime=125.700 memavail=640620 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.649
Stats 3170.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16314 bytes_read=51097 bytes_retransmit=0 bytes_invalid=0 send_seq=1169 receive_seq=1169 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.31 cputime=125.731 memavail=639668 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.601
Stats 3171.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16380 bytes_read=51301 bytes_retransmit=0 bytes_invalid=0 send_seq=1174 receive_seq=1174 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.2 sysload=0.36 cputime=125.763 memavail=639220 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.644
Stats 3172.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16457 bytes_read=51549 bytes_retransmit=0 bytes_invalid=0 send_seq=1179 receive_seq=1179 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.36 cputime=125.798 memavail=638752 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.605
Stats 3173.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16523 bytes_read=51753 bytes_retransmit=0 bytes_invalid=0 send_seq=1184 receive_seq=1184 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=26.0 sysload=0.36 cputime=125.837 memavail=636592 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.546
Stats 3174.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16589 bytes_read=51971 bytes_retransmit=0 bytes_invalid=0 send_seq=1189 receive_seq=1189 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.36 cputime=125.864 memavail=640832 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.407
Stats 3175.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16639 bytes_read=52214 bytes_retransmit=0 bytes_invalid=0 send_seq=1193 receive_seq=1193 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=33.4 sysload=0.36 cputime=125.895 memavail=640980 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.665
Stats 3176.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16673 bytes_read=52408 bytes_retransmit=0 bytes_invalid=0 send_seq=1196 receive_seq=1196 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.42 cputime=125.923 memavail=636960 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.665
Stats 3177.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16723 bytes_read=52607 bytes_retransmit=0 bytes_invalid=0 send_seq=1200 receive_seq=1200 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.42 cputime=125.952 memavail=636512 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.559
Stats 3178.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=16789 bytes_read=52855 bytes_retransmit=0 bytes_invalid=0 send_seq=1205 receive_seq=1205 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.6 sysload=0.42 cputime=125.988 memavail=636260 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.746
Stats 3179.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16866 bytes_read=53073 bytes_retransmit=0 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.42 cputime=126.017 memavail=641096 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.511
Stats 3180.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16932 bytes_read=53277 bytes_retransmit=0 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.42 cputime=126.045 memavail=641124 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.653
Stats 3181.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16982 bytes_read=53520 bytes_retransmit=0 bytes_invalid=0 send_seq=1219 receive_seq=1219 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=31.5 sysload=0.38 cputime=126.079 memavail=640248 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.569
Stats 3182.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17032 bytes_read=53719 bytes_retransmit=0 bytes_invalid=0 send_seq=1223 receive_seq=1223 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=25.2 sysload=0.38 cputime=126.111 memavail=640244 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.647
Stats 3183.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17109 bytes_read=53923 bytes_retransmit=0 bytes_invalid=0 send_seq=1228 receive_seq=1228 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.38 cputime=126.147 memavail=637832 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.544
Stats 3184.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17159 bytes_read=54180 bytes_retransmit=0 bytes_invalid=0 send_seq=1232 receive_seq=1232 retransmit_seq=0 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.38 cputime=126.177 memavail=640148 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.730
Stats 3185.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17236 bytes_read=54379 bytes_retransmit=0 bytes_invalid=0 send_seq=1237 receive_seq=1237 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.7 sysload=0.38 cputime=126.205 memavail=639672 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.713
Stats 3186.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17302 bytes_read=54572 bytes_retransmit=0 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=30.4 sysload=0.35 cputime=126.242 memavail=640492 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.545
Stats 3187.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17384 bytes_read=54812 bytes_retransmit=0 bytes_invalid=0 send_seq=1248 receive_seq=1248 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.4 sysload=0.35 cputime=126.279 memavail=639792 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.559
Stats 3188.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17461 bytes_read=55006 bytes_retransmit=0 bytes_invalid=0 send_seq=1253 receive_seq=1253 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.35 cputime=126.315 memavail=639092 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.629
Stats 3189.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17527 bytes_read=55220 bytes_retransmit=0 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.35 cputime=126.345 memavail=640648 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.558
Stats 3190.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17588 bytes_read=55463 bytes_retransmit=0 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.35 cputime=126.376 memavail=640172 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.481
Stats 3191.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17670 bytes_read=55672 bytes_retransmit=0 bytes_invalid=0 send_seq=1268 receive_seq=1268 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.0 sysload=0.32 cputime=126.415 memavail=639696 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.652
Stats 3192.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17736 bytes_read=55876 bytes_retransmit=0 bytes_invalid=0 send_seq=1273 receive_seq=1273 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.3 sysload=0.32 cputime=126.452 memavail=639220 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.668
Stats 3193.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17802 bytes_read=56124 bytes_retransmit=0 bytes_invalid=0 send_seq=1278 receive_seq=1278 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.4 sysload=0.32 cputime=126.489 memavail=637732 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.633
Stats 3194.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17852 bytes_read=56337 bytes_retransmit=0 bytes_invalid=0 send_seq=1282 receive_seq=1282 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.32 cputime=126.519 memavail=641384 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.572
Stats 3195.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17902 bytes_read=56536 bytes_retransmit=0 bytes_invalid=0 send_seq=1286 receive_seq=1286 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.32 cputime=126.549 memavail=641132 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.693
Stats 3196.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17968 bytes_read=56784 bytes_retransmit=0 bytes_invalid=0 send_seq=1291 receive_seq=1291 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=30.7 sysload=0.30 cputime=126.584 memavail=640764 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.431
Stats 3197.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18061 bytes_read=56993 bytes_retransmit=0 bytes_invalid=0 send_seq=1297 receive_seq=1297 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.30 cputime=126.620 memavail=640764 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.474
Stats 3198.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18127 bytes_read=57212 bytes_retransmit=0 bytes_invalid=0 send_seq=1302 receive_seq=1302 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.30 cputime=126.654 memavail=640764 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.475
Stats 3199.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18209 bytes_read=57464 bytes_retransmit=0 bytes_invalid=0 send_seq=1308 receive_seq=1308 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.30 cputime=126.685 memavail=641244 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.673
Stats 3200.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18275 bytes_read=57668 bytes_retransmit=0 bytes_invalid=0 send_seq=1313 receive_seq=1313 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.30 cputime=126.714 memavail=640764 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.545
Stats 3201.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18341 bytes_read=57887 bytes_retransmit=0 bytes_invalid=0 send_seq=1318 receive_seq=1318 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.35 cputime=126.748 memavail=641196 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.621
Stats 3202.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18407 bytes_read=58120 bytes_retransmit=0 bytes_invalid=0 send_seq=1323 receive_seq=1323 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=33.0 sysload=0.35 cputime=126.783 memavail=640944 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.509
Stats 3203.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18505 bytes_read=58334 bytes_retransmit=0 bytes_invalid=0 send_seq=1330 receive_seq=1330 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.35 cputime=126.818 memavail=639204 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.511
Stats 3204.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18566 bytes_read=58562 bytes_retransmit=0 bytes_invalid=0 send_seq=1334 receive_seq=1334 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.35 cputime=126.848 memavail=641416 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.589
Stats 3205.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18632 bytes_read=58795 bytes_retransmit=0 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.35 cputime=126.876 memavail=640428 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.658
Stats 3206.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18698 bytes_read=58999 bytes_retransmit=0 bytes_invalid=0 send_seq=1344 receive_seq=1344 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.4 sysload=0.33 cputime=126.913 memavail=640428 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.654
Stats 3207.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18764 bytes_read=59218 bytes_retransmit=0 bytes_invalid=0 send_seq=1349 receive_seq=1349 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=28.6 sysload=0.33 cputime=126.949 memavail=639756 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.658
Stats 3208.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18830 bytes_read=59451 bytes_retransmit=0 bytes_invalid=0 send_seq=1354 receive_seq=1354 retransmit_seq=0 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.33 cputime=126.987 memavail=641952 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.684
Stats 3209.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18928 bytes_read=59679 bytes_retransmit=0 bytes_invalid=0 send_seq=1361 receive_seq=1361 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.3 sysload=0.33 cputime=127.017 memavail=641052 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.696
Stats 3210.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18978 bytes_read=59893 bytes_retransmit=0 bytes_invalid=0 send_seq=1365 receive_seq=1365 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=32.1 sysload=0.33 cputime=127.045 memavail=640324 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.624
Stats 3211.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19028 bytes_read=60121 bytes_retransmit=0 bytes_invalid=0 send_seq=1369 receive_seq=1369 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.30 cputime=127.082 memavail=640072 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.640
Stats 3212.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19126 bytes_read=60335 bytes_retransmit=0 bytes_invalid=0 send_seq=1376 receive_seq=1376 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.3 sysload=0.30 cputime=127.115 memavail=640080 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.504
Stats 3213.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19176 bytes_read=60549 bytes_retransmit=0 bytes_invalid=0 send_seq=1380 receive_seq=1380 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=32.1 sysload=0.30 cputime=127.149 memavail=641736 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.733
Stats 3214.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19242 bytes_read=60796 bytes_retransmit=0 bytes_invalid=0 send_seq=1385 receive_seq=1385 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.2 sysload=0.30 cputime=127.178 memavail=641284 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.584
Stats 3215.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19340 bytes_read=61010 bytes_retransmit=0 bytes_invalid=0 send_seq=1392 receive_seq=1392 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.8 sysload=0.30 cputime=127.208 memavail=640804 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.816
Stats 3216.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19428 bytes_read=61250 bytes_retransmit=0 bytes_invalid=0 send_seq=1399 receive_seq=1399 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.27 cputime=127.244 memavail=641028 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.745
Stats 3217.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19505 bytes_read=61483 bytes_retransmit=0 bytes_invalid=0 send_seq=1404 receive_seq=1404 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.2 sysload=0.27 cputime=127.278 memavail=640804 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.739
Stats 3218.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=19587 bytes_read=61692 bytes_retransmit=0 bytes_invalid=0 send_seq=1410 receive_seq=1410 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=28.0 sysload=0.27 cputime=127.312 memavail=640804 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.678
Stats 3219.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19653 bytes_read=61925 bytes_retransmit=0 bytes_invalid=0 send_seq=1415 receive_seq=1415 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.9 sysload=0.27 cputime=127.340 memavail=641456 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.717
Stats 3220.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19714 bytes_read=62153 bytes_retransmit=0 bytes_invalid=0 send_seq=1419 receive_seq=1419 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.6 sysload=0.27 cputime=127.367 memavail=640980 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.525
Stats 3221.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19780 bytes_read=62357 bytes_retransmit=0 bytes_invalid=0 send_seq=1424 receive_seq=1424 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.25 cputime=127.400 memavail=640728 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.672
Stats 3222.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19862 bytes_read=62581 bytes_retransmit=0 bytes_invalid=0 send_seq=1430 receive_seq=1430 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.8 sysload=0.25 cputime=127.435 memavail=640736 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.744
Stats 3223.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=19907 bytes_read=62804 bytes_retransmit=0 bytes_invalid=0 send_seq=1433 receive_seq=1433 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.25 cputime=127.472 memavail=638996 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.690
Stats 3224.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20005 bytes_read=63032 bytes_retransmit=0 bytes_invalid=0 send_seq=1440 receive_seq=1440 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.6 sysload=0.25 cputime=127.501 memavail=641356 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.645
Stats 3225.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20087 bytes_read=63256 bytes_retransmit=0 bytes_invalid=0 send_seq=1446 receive_seq=1446 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.8 sysload=0.25 cputime=127.532 memavail=641200 print_time=187.001 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.756
Stats 3226.7: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=20177 bytes_read=63489 bytes_retransmit=0 bytes_invalid=0 send_seq=1451 receive_seq=1451 retransmit_seq=0 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.23 cputime=127.571 memavail=641000 print_time=279.233 buffer_time=0.355 print_stall=0 extruder: target=0 temp=210.0 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1964810280: Disconnected
Restarting printer
Start printer at Tue Apr 16 19:58:48 2024 (1713290328.8 3228.2)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.00002
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.85
stealthchop_threshold = 0

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1970695808: New connection
webhooks client 1970695808: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 3233.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2417 bytes_read=5748 bytes_retransmit=9 bytes_invalid=0 send_seq=201 receive_seq=200 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002378  raspberry_pi: temp=56.9 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.4 sysload=0.29 cputime=130.326 memavail=636124 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.4 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1970695808
webhooks: registering remote method 'reboot_machine' for connection id: 1970695808
webhooks: registering remote method 'pause_job_queue' for connection id: 1970695808
webhooks: registering remote method 'start_job_queue' for connection id: 1970695808
Stats 3234.3: gcodein=0  mcu: mcu_awake=0.000 mcu_task_avg=0.000000 mcu_task_stddev=0.000000 bytes_write=2438 bytes_read=5921 bytes_retransmit=9 bytes_invalid=0 send_seq=203 receive_seq=203 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002888  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.29 cputime=130.370 memavail=639308 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=211.1 pwm=0.000
Stats 3235.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000036 bytes_write=2444 bytes_read=6113 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002609  raspberry_pi: temp=56.9 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=31.7 sysload=0.29 cputime=130.417 memavail=638144 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.7 pwm=0.000
Stats 3236.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000036 bytes_write=2450 bytes_read=6261 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=56.4 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=31.0 sysload=0.29 cputime=130.444 memavail=638748 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=210.2 pwm=0.000
Stats 3237.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000036 bytes_write=2456 bytes_read=6424 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=31.3 sysload=0.27 cputime=130.470 memavail=638496 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=209.3 pwm=0.000
Stats 3238.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000036 bytes_write=2462 bytes_read=6601 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.2 sysload=0.27 cputime=130.497 memavail=638496 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=208.0 pwm=0.000
Stats 3239.3: gcodein=0  mcu: mcu_awake=0.010 mcu_task_avg=0.000028 mcu_task_stddev=0.000036 bytes_write=2468 bytes_read=6749 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.5 sysload=0.27 cputime=130.521 memavail=641284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=206.7 pwm=0.000
Stats 3240.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2474 bytes_read=6926 bytes_retransmit=9 bytes_invalid=0 send_seq=209 receive_seq=209 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002592  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.27 cputime=130.542 memavail=641264 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=205.6 pwm=0.000
Stats 3241.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2480 bytes_read=7103 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002615  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.6 sysload=0.27 cputime=130.568 memavail=640564 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=203.7 pwm=0.000
Stats 3242.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2486 bytes_read=7251 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002747  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.3 sysload=0.25 cputime=130.595 memavail=641252 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=202.6 pwm=0.000
Stats 3243.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2492 bytes_read=7414 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.25 cputime=130.623 memavail=641768 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=201.2 pwm=0.000
Stats 3244.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2498 bytes_read=7591 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=31.4 sysload=0.25 cputime=130.649 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=199.5 pwm=0.000
Stats 3245.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2504 bytes_read=7753 bytes_retransmit=9 bytes_invalid=0 send_seq=214 receive_seq=214 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002659  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.3 sysload=0.25 cputime=130.670 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=197.9 pwm=0.000
Stats 3246.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2510 bytes_read=7916 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002653  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.7 sysload=0.25 cputime=130.698 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=196.9 pwm=0.000
Stats 3247.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2516 bytes_read=8093 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002667  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.3 sysload=0.23 cputime=130.726 memavail=640584 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=195.0 pwm=0.000
Stats 3248.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2522 bytes_read=8241 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002663  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.23 cputime=130.754 memavail=640584 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=193.7 pwm=0.000
Stats 3249.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2528 bytes_read=8404 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002671  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.23 cputime=130.778 memavail=641796 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=192.5 pwm=0.000
Stats 3250.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2534 bytes_read=8595 bytes_retransmit=9 bytes_invalid=0 send_seq=219 receive_seq=219 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=32.1 sysload=0.23 cputime=130.800 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=190.7 pwm=0.000
Stats 3251.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2546 bytes_read=8759 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002794  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.23 cputime=130.827 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=189.3 pwm=0.000
Stats 3252.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2552 bytes_read=8922 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002775  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.21 cputime=130.854 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=188.0 pwm=0.000
Stats 3253.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2558 bytes_read=9099 bytes_retransmit=9 bytes_invalid=0 send_seq=223 receive_seq=223 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002758  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.21 cputime=130.882 memavail=639096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=186.3 pwm=0.000
Stats 3254.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=2564 bytes_read=9247 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.21 cputime=130.906 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=185.1 pwm=0.000
Stats 3255.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2570 bytes_read=9424 bytes_retransmit=9 bytes_invalid=0 send_seq=225 receive_seq=225 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.5 sysload=0.21 cputime=130.924 memavail=641052 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=184.0 pwm=0.000
Stats 3256.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2576 bytes_read=9601 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.21 cputime=130.953 memavail=640828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=182.1 pwm=0.000
Stats 3257.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2582 bytes_read=9749 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.19 cputime=130.981 memavail=640828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=180.9 pwm=0.000
Stats 3258.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2588 bytes_read=9912 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.19 cputime=131.008 memavail=640828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=179.7 pwm=0.000
Stats 3259.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000010 bytes_write=2594 bytes_read=10089 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.8 sysload=0.19 cputime=131.034 memavail=641088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=178.0 pwm=0.000
Stats 3260.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2600 bytes_read=10251 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.19 cputime=131.054 memavail=640660 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=177.0 pwm=0.000
Stats 3261.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2606 bytes_read=10414 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.1 sysload=0.19 cputime=131.080 memavail=640212 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=175.7 pwm=0.000
Stats 3262.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2612 bytes_read=10591 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.18 cputime=131.108 memavail=640892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=174.0 pwm=0.000
Stats 3263.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2618 bytes_read=10739 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.18 cputime=131.134 memavail=639436 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=173.1 pwm=0.000
Stats 3264.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2624 bytes_read=10917 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.7 sysload=0.18 cputime=131.159 memavail=641332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=171.8 pwm=0.000
Stats 3265.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2630 bytes_read=11093 bytes_retransmit=9 bytes_invalid=0 send_seq=235 receive_seq=235 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=26.8 sysload=0.18 cputime=131.179 memavail=640604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=170.3 pwm=0.000
Stats 3266.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2636 bytes_read=11241 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.18 cputime=131.205 memavail=640604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=169.2 pwm=0.000
Stats 3267.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2642 bytes_read=11419 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.2 sysload=0.16 cputime=131.232 memavail=640604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=168.1 pwm=0.000
Stats 3268.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2648 bytes_read=11581 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.4 sysload=0.16 cputime=131.258 memavail=640604 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=166.5 pwm=0.000
Stats 3269.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2654 bytes_read=11729 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=26.6 sysload=0.16 cputime=131.283 memavail=641096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=165.5 pwm=0.000
Stats 3270.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2660 bytes_read=11921 bytes_retransmit=9 bytes_invalid=0 send_seq=240 receive_seq=240 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.6 sysload=0.16 cputime=131.304 memavail=641036 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=164.4 pwm=0.000
Stats 3271.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2666 bytes_read=12083 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=131.331 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=162.9 pwm=0.000
Stats 3272.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2672 bytes_read=12231 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.5 sysload=0.15 cputime=131.357 memavail=641068 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=161.9 pwm=0.000
Stats 3273.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2678 bytes_read=12409 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=32.5 sysload=0.15 cputime=131.385 memavail=638880 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=160.7 pwm=0.000
Stats 3274.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2684 bytes_read=12571 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.5 sysload=0.15 cputime=131.411 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=159.5 pwm=0.000
Stats 3275.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2690 bytes_read=12733 bytes_retransmit=9 bytes_invalid=0 send_seq=245 receive_seq=245 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.9 sysload=0.15 cputime=131.433 memavail=640888 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=158.4 pwm=0.000
Stats 3276.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2696 bytes_read=12911 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.9 sysload=0.15 cputime=131.461 memavail=640652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=157.3 pwm=0.000
Stats 3277.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2702 bytes_read=13073 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.14 cputime=131.490 memavail=640876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=156.0 pwm=0.000
Stats 3278.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2708 bytes_read=13221 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.2 sysload=0.14 cputime=131.518 memavail=640652 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.9 pwm=0.000
Stats 3279.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2714 bytes_read=13399 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.3 sysload=0.14 cputime=131.543 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=154.0 pwm=0.000
Stats 3280.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2720 bytes_read=13575 bytes_retransmit=9 bytes_invalid=0 send_seq=250 receive_seq=250 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.0 sysload=0.14 cputime=131.565 memavail=640832 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=152.8 pwm=0.000
Stats 3281.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2726 bytes_read=13723 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.14 cputime=131.590 memavail=640832 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=151.7 pwm=0.000
Stats 3282.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2732 bytes_read=13901 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.2 sysload=0.13 cputime=131.617 memavail=640328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=150.8 pwm=0.000
Stats 3283.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2738 bytes_read=14063 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=131.645 memavail=638876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=149.5 pwm=0.000
Stats 3284.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2744 bytes_read=14211 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.6 sysload=0.13 cputime=131.669 memavail=641340 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=148.5 pwm=0.000
Stats 3285.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2750 bytes_read=14403 bytes_retransmit=9 bytes_invalid=0 send_seq=255 receive_seq=255 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.1 sysload=0.13 cputime=131.692 memavail=640856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=147.5 pwm=0.000
Stats 3286.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2756 bytes_read=14565 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=131.721 memavail=640856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=146.4 pwm=0.000
Stats 3287.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2762 bytes_read=14713 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002694  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.12 cputime=131.749 memavail=640100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=145.5 pwm=0.000
Stats 3288.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2768 bytes_read=14885 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.8 sysload=0.12 cputime=131.777 memavail=640100 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=144.6 pwm=0.000
Stats 3289.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2774 bytes_read=15036 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.5 sysload=0.12 cputime=131.801 memavail=641172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=143.4 pwm=0.000
Stats 3290.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2780 bytes_read=15188 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.12 cputime=131.822 memavail=640912 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=142.5 pwm=0.000
Stats 3291.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2786 bytes_read=15354 bytes_retransmit=9 bytes_invalid=0 send_seq=261 receive_seq=261 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.2 sysload=0.12 cputime=131.848 memavail=640688 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=141.4 pwm=0.000
Stats 3292.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2792 bytes_read=15514 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002690  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=131.875 memavail=640436 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=140.3 pwm=0.000
Stats 3293.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2798 bytes_read=15662 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.1 sysload=0.11 cputime=131.901 memavail=638724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=139.5 pwm=0.000
Stats 3294.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2804 bytes_read=15840 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002692  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=26.9 sysload=0.11 cputime=131.926 memavail=641348 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=138.7 pwm=0.000
Stats 3295.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2810 bytes_read=16016 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.11 cputime=131.949 memavail=640620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=137.4 pwm=0.000
Stats 3296.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2816 bytes_read=16164 bytes_retransmit=9 bytes_invalid=0 send_seq=266 receive_seq=266 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.11 cputime=131.975 memavail=641092 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=136.6 pwm=0.000
Stats 3297.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2822 bytes_read=16342 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.18 cputime=131.996 memavail=633828 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=135.7 pwm=0.000
Stats 3298.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2828 bytes_read=16504 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.18 cputime=132.015 memavail=633856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=134.6 pwm=0.000
Stats 3299.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2834 bytes_read=16652 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.18 cputime=132.039 memavail=641332 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.8 pwm=0.000
Stats 3300.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2840 bytes_read=16844 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002684  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=26.9 sysload=0.18 cputime=132.061 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=133.0 pwm=0.000
Stats 3301.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2846 bytes_read=17006 bytes_retransmit=9 bytes_invalid=0 send_seq=271 receive_seq=271 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=132.088 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=131.8 pwm=0.000
Stats 3302.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2852 bytes_read=17154 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.8 sysload=0.16 cputime=132.116 memavail=641236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.9 pwm=0.000
Stats 3303.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2858 bytes_read=17332 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.16 cputime=132.146 memavail=638924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=130.1 pwm=0.000
Stats 3304.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=2864 bytes_read=17494 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.8 sysload=0.16 cputime=132.171 memavail=641116 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=129.3 pwm=0.000
Stats 3305.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2870 bytes_read=17657 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.3 sysload=0.16 cputime=132.194 memavail=641064 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=128.4 pwm=0.000
Stats 3306.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2876 bytes_read=17838 bytes_retransmit=9 bytes_invalid=0 send_seq=276 receive_seq=276 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.16 cputime=132.223 memavail=640872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=127.6 pwm=0.000
Stats 3307.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2882 bytes_read=18004 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002689  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.8 sysload=0.15 cputime=132.252 memavail=640648 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=126.5 pwm=0.000
Stats 3308.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2888 bytes_read=18155 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.5 sysload=0.15 cputime=132.281 memavail=640396 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.7 pwm=0.000
Stats 3309.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2894 bytes_read=18336 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.15 cputime=132.309 memavail=640916 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=125.1 pwm=0.000
Stats 3310.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2900 bytes_read=18502 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.15 cputime=132.332 memavail=640672 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=124.0 pwm=0.000
Stats 3311.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2906 bytes_read=18667 bytes_retransmit=9 bytes_invalid=0 send_seq=281 receive_seq=281 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.9 sysload=0.15 cputime=132.361 memavail=640840 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=123.3 pwm=0.000
Stats 3312.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2918 bytes_read=18864 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.0 sysload=0.14 cputime=132.390 memavail=640588 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=122.5 pwm=0.000
Stats 3313.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2924 bytes_read=19030 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.14 cputime=132.417 memavail=638624 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=121.5 pwm=0.000
Stats 3314.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2930 bytes_read=19181 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002691  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.0 sysload=0.14 cputime=132.441 memavail=641724 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.7 pwm=0.000
Stats 3315.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2936 bytes_read=19362 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002693  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.9 sysload=0.14 cputime=132.464 memavail=640848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=120.1 pwm=0.000
Stats 3316.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2942 bytes_read=19542 bytes_retransmit=9 bytes_invalid=0 send_seq=287 receive_seq=287 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.2 sysload=0.14 cputime=132.490 memavail=640848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=119.1 pwm=0.000
Stats 3317.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2948 bytes_read=19693 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=132.516 memavail=640848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=118.3 pwm=0.000
Stats 3318.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2954 bytes_read=19874 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=31.7 sysload=0.13 cputime=132.544 memavail=641676 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=117.7 pwm=0.000
Stats 3319.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2960 bytes_read=20040 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.13 cputime=132.567 memavail=640932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=116.7 pwm=0.000
Stats 3320.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2966 bytes_read=20191 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.9 sysload=0.13 cputime=132.588 memavail=640428 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.9 pwm=0.000
Stats 3321.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2972 bytes_read=20386 bytes_retransmit=9 bytes_invalid=0 send_seq=292 receive_seq=292 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.9 sysload=0.13 cputime=132.615 memavail=640896 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=115.2 pwm=0.000
Stats 3322.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2978 bytes_read=20552 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.28 cputime=132.642 memavail=640644 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=114.3 pwm=0.000
Stats 3323.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2984 bytes_read=20703 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.2 sysload=0.28 cputime=132.669 memavail=639184 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=113.7 pwm=0.000
Stats 3324.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2990 bytes_read=20899 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=29.6 sysload=0.28 cputime=132.695 memavail=641324 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.6 pwm=0.000
Stats 3325.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2996 bytes_read=21050 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.3 sysload=0.28 cputime=132.717 memavail=641072 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=112.0 pwm=0.000
Stats 3326.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3002 bytes_read=21215 bytes_retransmit=9 bytes_invalid=0 send_seq=297 receive_seq=297 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.9 sysload=0.28 cputime=132.745 memavail=640848 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=111.4 pwm=0.000
Stats 3327.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3008 bytes_read=21411 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.4 sysload=0.25 cputime=132.774 memavail=641104 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=110.7 pwm=0.000
Stats 3328.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3014 bytes_read=21562 bytes_retransmit=9 bytes_invalid=0 send_seq=299 receive_seq=299 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.25 cputime=132.802 memavail=640628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.9 pwm=0.000
Stats 3329.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3020 bytes_read=21713 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.25 cputime=132.827 memavail=641368 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=109.2 pwm=0.000
Stats 3330.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3026 bytes_read=21909 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.1 sysload=0.25 cputime=132.851 memavail=640884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=108.3 pwm=0.000
Stats 3331.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3032 bytes_read=22074 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.3 sysload=0.25 cputime=132.878 memavail=640884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.6 pwm=0.000
Stats 3332.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3038 bytes_read=22225 bytes_retransmit=9 bytes_invalid=0 send_seq=303 receive_seq=303 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=28.1 sysload=0.23 cputime=132.907 memavail=640884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=107.1 pwm=0.000
Stats 3333.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3044 bytes_read=22421 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=26.4 sysload=0.23 cputime=132.936 memavail=639172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=106.4 pwm=0.000
Stats 3334.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3050 bytes_read=22572 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.23 cputime=132.956 memavail=641088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.7 pwm=0.000
Stats 3335.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3056 bytes_read=22723 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.9 sysload=0.23 cputime=132.985 memavail=641056 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=105.0 pwm=0.000
Stats 3336.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3062 bytes_read=22933 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.0 sysload=0.23 cputime=133.016 memavail=640328 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=104.2 pwm=0.000
Stats 3337.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3068 bytes_read=23084 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.21 cputime=133.045 memavail=640884 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=103.7 pwm=0.000
Stats 3338.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3074 bytes_read=23235 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.9 pwm=0.000 mcu_temp: temp=30.4 sysload=0.21 cputime=133.074 memavail=641932 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.9 pwm=0.000
Stats 3339.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3080 bytes_read=23431 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.21 cputime=133.102 memavail=641412 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=102.1 pwm=0.000
Stats 3340.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3086 bytes_read=23582 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.21 cputime=133.125 memavail=640664 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.8 pwm=0.000
Stats 3341.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3092 bytes_read=23747 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.3 sysload=0.21 cputime=133.154 memavail=641144 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=101.0 pwm=0.000
Stats 3342.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3098 bytes_read=23943 bytes_retransmit=9 bytes_invalid=0 send_seq=313 receive_seq=313 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.5 sysload=0.20 cputime=133.184 memavail=640664 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=100.2 pwm=0.000
Stats 3343.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3104 bytes_read=24094 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.20 cputime=133.214 memavail=640172 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.7 pwm=0.000
Stats 3344.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3110 bytes_read=24245 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.20 cputime=133.241 memavail=640920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=99.1 pwm=0.000
Stats 3345.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3116 bytes_read=24441 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.20 cputime=133.267 memavail=640632 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=98.3 pwm=0.000
Stats 3346.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3122 bytes_read=24606 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=133.298 memavail=640692 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.6 pwm=0.000
Stats 3347.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3128 bytes_read=24757 bytes_retransmit=9 bytes_invalid=0 send_seq=318 receive_seq=318 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.8 sysload=0.18 cputime=133.326 memavail=640216 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=97.1 pwm=0.000
Stats 3348.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3134 bytes_read=24941 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=31.3 sysload=0.18 cputime=133.356 memavail=640224 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=96.3 pwm=0.000
Stats 3349.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3140 bytes_read=25082 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.18 cputime=133.378 memavail=641344 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.8 pwm=0.000
Stats 3350.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3146 bytes_read=25237 bytes_retransmit=9 bytes_invalid=0 send_seq=321 receive_seq=321 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.18 cputime=133.402 memavail=640860 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=95.4 pwm=0.000
Stats 3351.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3152 bytes_read=25423 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.7 sysload=0.18 cputime=133.431 memavail=640608 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=94.7 pwm=0.000
Stats 3352.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3158 bytes_read=25574 bytes_retransmit=9 bytes_invalid=0 send_seq=323 receive_seq=323 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.8 sysload=0.17 cputime=133.459 memavail=641080 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.9 pwm=0.000
Stats 3353.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3164 bytes_read=25740 bytes_retransmit=9 bytes_invalid=0 send_seq=324 receive_seq=324 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=26.8 sysload=0.17 cputime=133.490 memavail=639356 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=93.5 pwm=0.000
Stats 3354.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3170 bytes_read=25921 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=133.515 memavail=641304 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.7 pwm=0.000
Stats 3355.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3176 bytes_read=26072 bytes_retransmit=9 bytes_invalid=0 send_seq=326 receive_seq=326 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.2 sysload=0.17 cputime=133.536 memavail=640856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=92.2 pwm=0.000
Stats 3356.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3182 bytes_read=26252 bytes_retransmit=9 bytes_invalid=0 send_seq=327 receive_seq=327 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.9 sysload=0.17 cputime=133.564 memavail=640856 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.8 pwm=0.000
Stats 3357.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3188 bytes_read=26433 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=28.8 sysload=0.15 cputime=133.591 memavail=640872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=91.1 pwm=0.000
Stats 3358.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3194 bytes_read=26584 bytes_retransmit=9 bytes_invalid=0 send_seq=329 receive_seq=329 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.15 cputime=133.618 memavail=640904 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.4 pwm=0.000
Stats 3359.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3200 bytes_read=26750 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=31.2 sysload=0.15 cputime=133.641 memavail=640648 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=90.1 pwm=0.000
Stats 3360.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3206 bytes_read=26931 bytes_retransmit=9 bytes_invalid=0 send_seq=331 receive_seq=331 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.15 cputime=133.660 memavail=640628 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=89.4 pwm=0.000
Stats 3361.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3212 bytes_read=27096 bytes_retransmit=9 bytes_invalid=0 send_seq=332 receive_seq=332 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.15 cputime=133.687 memavail=640152 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.8 pwm=0.000
Stats 3362.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3218 bytes_read=27262 bytes_retransmit=9 bytes_invalid=0 send_seq=333 receive_seq=333 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.1 sysload=0.14 cputime=133.714 memavail=640920 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=88.3 pwm=0.000
Stats 3363.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3224 bytes_read=27443 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.14 cputime=133.741 memavail=640956 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.8 pwm=0.000
Stats 3364.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3230 bytes_read=27594 bytes_retransmit=9 bytes_invalid=0 send_seq=335 receive_seq=335 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.14 cputime=133.766 memavail=641708 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.0 pwm=0.000
Stats 3365.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3236 bytes_read=27760 bytes_retransmit=9 bytes_invalid=0 send_seq=336 receive_seq=336 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.14 cputime=133.787 memavail=641228 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=87.0 pwm=0.000
Stats 3366.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3242 bytes_read=27955 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.14 cputime=133.815 memavail=641092 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=86.0 pwm=0.000
Stats 3367.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3248 bytes_read=28106 bytes_retransmit=9 bytes_invalid=0 send_seq=338 receive_seq=338 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.13 cputime=133.842 memavail=640868 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.6 pwm=0.000
Stats 3368.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3254 bytes_read=28272 bytes_retransmit=9 bytes_invalid=0 send_seq=339 receive_seq=339 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.13 cputime=133.869 memavail=640616 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=85.2 pwm=0.000
Stats 3369.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3260 bytes_read=28453 bytes_retransmit=9 bytes_invalid=0 send_seq=340 receive_seq=340 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.3 sysload=0.13 cputime=133.894 memavail=641316 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=84.6 pwm=0.000
Stats 3370.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3266 bytes_read=28604 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.1 sysload=0.13 cputime=133.915 memavail=641164 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.9 pwm=0.000
Stats 3371.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3272 bytes_read=28784 bytes_retransmit=9 bytes_invalid=0 send_seq=342 receive_seq=342 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=25.8 sysload=0.13 cputime=133.942 memavail=640688 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=83.6 pwm=0.000
Stats 3372.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3278 bytes_read=28965 bytes_retransmit=9 bytes_invalid=0 send_seq=343 receive_seq=343 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.9 sysload=0.12 cputime=133.969 memavail=640688 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.9 pwm=0.000
Stats 3373.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3290 bytes_read=29116 bytes_retransmit=9 bytes_invalid=0 send_seq=345 receive_seq=344 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.5 sysload=0.12 cputime=133.996 memavail=641096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.3 pwm=0.000
Stats 3374.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3296 bytes_read=29298 bytes_retransmit=9 bytes_invalid=0 send_seq=346 receive_seq=346 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.12 cputime=134.023 memavail=641088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=82.1 pwm=0.000
Stats 3375.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3302 bytes_read=29479 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=32.0 sysload=0.12 cputime=134.046 memavail=640688 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=81.5 pwm=0.000
Stats 3376.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3308 bytes_read=29644 bytes_retransmit=9 bytes_invalid=0 send_seq=348 receive_seq=348 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=31.0 sysload=0.12 cputime=134.075 memavail=641088 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.9 pwm=0.000
Stats 3377.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3314 bytes_read=29810 bytes_retransmit=9 bytes_invalid=0 send_seq=349 receive_seq=349 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.11 cputime=134.104 memavail=640864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.7 pwm=0.000
Stats 3378.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3320 bytes_read=29991 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.9 sysload=0.11 cputime=134.134 memavail=640864 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=80.1 pwm=0.000
Stats 3379.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3326 bytes_read=30142 bytes_retransmit=9 bytes_invalid=0 send_seq=351 receive_seq=351 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.1 sysload=0.11 cputime=134.160 memavail=641356 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.5 pwm=0.000
Stats 3380.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3332 bytes_read=30308 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.11 cputime=134.184 memavail=641096 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=79.1 pwm=0.000
Stats 3381.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3338 bytes_read=30503 bytes_retransmit=9 bytes_invalid=0 send_seq=353 receive_seq=353 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.11 cputime=134.213 memavail=640872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.5 pwm=0.000
Stats 3382.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3344 bytes_read=30654 bytes_retransmit=9 bytes_invalid=0 send_seq=354 receive_seq=354 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=26.7 sysload=0.10 cputime=134.243 memavail=640620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=78.3 pwm=0.000
Stats 3383.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3350 bytes_read=30820 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=26.7 sysload=0.10 cputime=134.272 memavail=640620 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.7 pwm=0.000
Stats 3384.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3356 bytes_read=31001 bytes_retransmit=9 bytes_invalid=0 send_seq=356 receive_seq=356 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.10 cputime=134.300 memavail=641356 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=77.2 pwm=0.000
Stats 3385.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3362 bytes_read=31152 bytes_retransmit=9 bytes_invalid=0 send_seq=357 receive_seq=357 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.10 cputime=134.323 memavail=640876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.5 pwm=0.000
Stats 3386.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3368 bytes_read=31332 bytes_retransmit=9 bytes_invalid=0 send_seq=358 receive_seq=358 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.10 cputime=134.352 memavail=640924 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=76.6 pwm=0.000
Stats 3387.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3374 bytes_read=31513 bytes_retransmit=9 bytes_invalid=0 send_seq=359 receive_seq=359 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.7 sysload=0.17 cputime=134.381 memavail=640892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.8 pwm=0.000
Stats 3388.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3380 bytes_read=31664 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.5 sysload=0.17 cputime=134.408 memavail=640892 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.4 pwm=0.000
Stats 3389.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3386 bytes_read=31830 bytes_retransmit=9 bytes_invalid=0 send_seq=361 receive_seq=361 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.6 sysload=0.17 cputime=134.433 memavail=641284 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=75.1 pwm=0.000
Stats 3390.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3392 bytes_read=32011 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.7 sysload=0.17 cputime=134.455 memavail=640876 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=74.5 pwm=0.000
Stats 3391.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3398 bytes_read=32162 bytes_retransmit=9 bytes_invalid=0 send_seq=363 receive_seq=363 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.17 cputime=134.481 memavail=641352 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.9 pwm=0.000
Stats 3392.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3404 bytes_read=32342 bytes_retransmit=9 bytes_invalid=0 send_seq=364 receive_seq=364 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=27.2 sysload=0.24 cputime=134.507 memavail=640872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.6 pwm=0.000
Stats 3393.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3410 bytes_read=32523 bytes_retransmit=9 bytes_invalid=0 send_seq=365 receive_seq=365 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.24 cputime=134.535 memavail=640872 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=73.2 pwm=0.000
Stats 3394.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3416 bytes_read=32674 bytes_retransmit=9 bytes_invalid=0 send_seq=366 receive_seq=366 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.1 sysload=0.24 cputime=134.558 memavail=641312 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.8 pwm=0.000
Stats 3395.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3422 bytes_read=32840 bytes_retransmit=9 bytes_invalid=0 send_seq=367 receive_seq=367 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.6 sysload=0.24 cputime=134.579 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=72.4 pwm=0.000
Stats 3396.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3428 bytes_read=33021 bytes_retransmit=9 bytes_invalid=0 send_seq=368 receive_seq=368 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.2 sysload=0.24 cputime=134.606 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.8 pwm=0.000
Stats 3397.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3434 bytes_read=33186 bytes_retransmit=9 bytes_invalid=0 send_seq=369 receive_seq=369 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.4 sysload=0.30 cputime=134.633 memavail=641060 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.3 pwm=0.000
Stats 3398.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3440 bytes_read=33352 bytes_retransmit=9 bytes_invalid=0 send_seq=370 receive_seq=370 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.2 sysload=0.30 cputime=134.663 memavail=640836 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=71.1 pwm=0.000
Stats 3399.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3446 bytes_read=33533 bytes_retransmit=9 bytes_invalid=0 send_seq=371 receive_seq=371 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.30 cputime=134.690 memavail=641672 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.8 pwm=0.000
Stats 3400.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3452 bytes_read=33684 bytes_retransmit=9 bytes_invalid=0 send_seq=372 receive_seq=372 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.30 cputime=134.713 memavail=641356 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=70.4 pwm=0.000
Stats 3401.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3458 bytes_read=33865 bytes_retransmit=9 bytes_invalid=0 send_seq=373 receive_seq=373 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.5 sysload=0.30 cputime=134.742 memavail=640700 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.8 pwm=0.000
Stats 3402.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3464 bytes_read=34045 bytes_retransmit=9 bytes_invalid=0 send_seq=374 receive_seq=374 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.44 cputime=134.771 memavail=640700 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.5 pwm=0.000
Stats 3403.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3470 bytes_read=34196 bytes_retransmit=9 bytes_invalid=0 send_seq=375 receive_seq=375 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.44 cputime=134.799 memavail=640700 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=69.3 pwm=0.000
Stats 3404.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3476 bytes_read=34377 bytes_retransmit=9 bytes_invalid=0 send_seq=376 receive_seq=376 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.44 cputime=134.824 memavail=640940 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.7 pwm=0.000
Stats 3405.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3482 bytes_read=34543 bytes_retransmit=9 bytes_invalid=0 send_seq=377 receive_seq=377 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=27.6 sysload=0.44 cputime=134.847 memavail=640908 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.3 pwm=0.000
Stats 3406.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3488 bytes_read=34694 bytes_retransmit=9 bytes_invalid=0 send_seq=378 receive_seq=378 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.7 sysload=0.44 cputime=134.874 memavail=640680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=68.1 pwm=0.000
Stats 3407.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3494 bytes_read=34884 bytes_retransmit=9 bytes_invalid=0 send_seq=379 receive_seq=379 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.3 sysload=0.40 cputime=134.901 memavail=640680 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=67.6 pwm=0.000
Stats 3408.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3513 bytes_read=35043 bytes_retransmit=9 bytes_invalid=0 send_seq=381 receive_seq=381 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.40 cputime=134.934 memavail=640176 print_time=179.431 buffer_time=0.326 print_stall=0 extruder: target=0 temp=67.2 pwm=0.000
Attempting MCU 'mcu' reset command
webhooks client 1970695808: Disconnected
Restarting printer
Start printer at Tue Apr 16 20:01:50 2024 (1713290510.5 3409.9)
===== Config file =====
[virtual_sdcard]
path = /home/philipp/printer_data/gcodes
on_error_gcode = CANCEL_PRINT

[pause_resume]

[display_status]

[respond]

[gcode_macro CANCEL_PRINT]
description = Cancel the actual running print
rename_existing = CANCEL_PRINT_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
	{% set retract = client.cancel_retract|default(5.0)|abs %}
	
	{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
	else "X=" ~ client.park_at_cancel_x %}
	{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
	else "Y=" ~ client.park_at_cancel_y %}
	{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
	
	
	{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
	SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
	{% endif %}
	{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
	_CLIENT_RETRACT LENGTH={retract}
	TURN_OFF_HEATERS
	M106 S0
	{client.user_cancel_macro|default("")}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	
	SET_PAUSE_NEXT_LAYER ENABLE=0
	SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
	CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description = Pause the actual running print
rename_existing = PAUSE_BASE
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set idle_timeout = client.idle_timeout|default(0) %}
	{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
	{% set restore = False if printer.toolhead.extruder == ''
	else True  if params.RESTORE|default(1)|int == 1 else False %}
	
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
	
	{% if idle_timeout > 0 %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
	SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
	{% endif %}
	PAUSE_BASE
	{client.user_pause_macro|default("")}
	_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}

[gcode_macro RESUME]
description = Resume the actual running print
rename_existing = RESUME_BASE
variable_last_extruder_temp = {'restore': False, 'temp': 0}
variable_restore_idle_timeout = 0
variable_idle_state = False
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set sp_move = client.speed_move|default(velocity) %}
	{% set runout_resume = True if client.runout_sensor|default("") == ""
	else True if not printer[client.runout_sensor].enabled
	else printer[client.runout_sensor].filament_detected %}
	{% set can_extrude = True if printer.toolhead.extruder == ''
	else printer[printer.toolhead.extruder].can_extrude %}
	{% set do_resume = False %}
	{% set prompt_txt = [] %}
	
	
	{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
	SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
	{% if last_extruder_temp.restore %}
	
	RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
	M109 S{last_extruder_temp.temp}
	{% set do_resume = True %}
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	
	{% elif can_extrude %}
	{% set do_resume = True %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
	{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
	{% endif %}
	{% if runout_resume %}
	{% if do_resume %}
	{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %}
	{client.user_resume_macro|default("")}
	_CLIENT_EXTRUDE
	RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
	{% endif %}
	{% else %}
	RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
	{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
	{% endif %}
	
	{% if not (runout_resume and do_resume) %}
	RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
	{% for element in prompt_txt %}
	RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
	{% endfor %}
	RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
	RESPOND TYPE=command MSG="action:prompt_show"
	{% endif %}

[gcode_macro SET_PAUSE_NEXT_LAYER]
description = Enable a pause if the next layer is reached
gcode = 
	{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
	{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
	{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"

[gcode_macro SET_PAUSE_AT_LAYER]
description = Enable/disable a pause if a given layer number is reached
gcode = 
	{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
	{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
	else params.LAYER is defined %}
	{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
	{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
	SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"

[gcode_macro SET_PRINT_STATS_INFO]
rename_existing = SET_PRINT_STATS_INFO_BASE
description = Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer = { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer = { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode = 
	{% if pause_next_layer.enable %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
	{pause_next_layer.call}
	SET_PAUSE_NEXT_LAYER ENABLE=0
	{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
	RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
	{pause_at_layer.call}
	SET_PAUSE_AT_LAYER ENABLE=0
	{% endif %}
	SET_PRINT_STATS_INFO_BASE {rawparams}

[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description = Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
	{% set use_custom     = client.use_custom_pos|default(false)|lower == 'true' %}
	{% set custom_park_x  = client.custom_park_x|default(0.0) %}
	{% set custom_park_y  = client.custom_park_y|default(0.0) %}
	{% set park_dz        = client.custom_park_dz|default(2.0)|abs %}
	{% set sp_hop         = client.speed_hop|default(15) * 60 %}
	{% set sp_move        = client.speed_move|default(velocity) * 60 %}
	
	{% set origin    = printer.gcode_move.homing_origin %}
	{% set act       = printer.gcode_move.gcode_position %}
	{% set max       = printer.toolhead.axis_maximum %}
	{% set cone      = printer.toolhead.cone_start_z|default(max.z) %}
	{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
	else False %}
	
	{% set z_min = params.Z_MIN|default(0)|float %}
	{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
	{% set x_park = params.X       if params.X is defined
	else custom_park_x  if use_custom
	else 0.0            if round_bed
	else (max.x - 5.0) %}
	{% set y_park = params.Y       if params.Y is defined
	else custom_park_y  if use_custom
	else (max.y - 5.0)  if round_bed and z_park < cone
	else 0.0            if round_bed
	else (max.y - 5.0) %}
	
	_CLIENT_RETRACT
	{% if "xyz" in printer.toolhead.homed_axes %}
	G90
	G1 Z{z_park} F{sp_hop}
	G1 X{x_park} Y{y_park} F{sp_move}
	{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='Printer not homed'
	{% endif %}

[gcode_macro _CLIENT_EXTRUDE]
description = Extrudes, if the extruder is hot enough
gcode = 
	
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
	{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
	{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
	
	{% if printer.toolhead.extruder != '' %}
	{% if printer[printer.toolhead.extruder].can_extrude %}
	{% if use_fw_retract %}
	{% if length < 0 %}
	G10
	{% else %}
	G11
	{% endif %}
	{% else %}
	M83
	G1 E{length} F{(speed|float|abs) * 60}
	{% if absolute_extrude %}
	M82
	{% endif %}
	{% endif %}
	{% else %}
	RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
	{% endif %}
	{% endif %}

[gcode_macro _CLIENT_RETRACT]
description = Retracts, if the extruder is hot enough
gcode = 
	{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
	{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
	{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
	
	_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}

[gcode_macro LOAD_MESH_TEMP]
description = Load or generate a mesh
gcode = 
	
	{% set bed_temperature = params.BED_TEMPERATURE|default(0) %}
	{% set force = params.FORCE|default(0) %}
	
	{action_respond_info("- AUTOMATED BED MESH GENERATOR -")}
	{% if bed_temperature|int < 30 %}
	{action_respond_info("Your bed temp is to low, make sure it is at least 30 or higher")}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 0 %}
	BED_MESH_PROFILE LOAD={bed_temperature}
	G28 Z
	{action_respond_info("Succesfully loaded bed_mesh "+ bed_temperature)}
	{% else %}
	{% if printer.configfile.config["bed_mesh " + bed_temperature] is defined and force|int == 1 %}
	BED_MESH_PROFILE REMOVE={bed_temperature}
	{% endif %}
	{action_respond_info("bed_mesh not defined, your bed temperature will go up!")}
	{action_respond_info("We will probe the bed and save the mesh as bed_mesh "+ bed_temperature)}
	ADD_BED_MESH TARGET_TEMP={bed_temperature}
	{% endif %}
	{% endif %}

[gcode_macro ADD_BED_MESH]
description = Generate a mesh and prepare for SAVE_CONFIG
gcode = 
	
	{% set target_temp = params.TARGET_TEMP|default(30) %}
	
	M190 S{target_temp}
	BED_MESH_CALIBRATE
	BED_MESH_PROFILE SAVE={target_temp}
	BED_MESH_PROFILE REMOVE=default

[gcode_macro PREHEATANDMESH]
description = Preheat for mesh
gcode = 
	
	{% set t_extruder = params.T_EXTRUDER|default(0) %}
	{% set t_bed = params.T_BED|default(0) %}
	
	M104 S{t_extruder}
	M190 S{t_bed}
	G28
	M109 S{t_extruder}
	LOAD_MESH_TEMP BED_TEMPERATURE={t_bed}
	G28

[gcode_macro PREHEAT60]
description = Preheat bed 60C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=60 T_EXTRUDER=140

[gcode_macro PREHEAT80]
description = Preheat bed 80C extruder 140C
gcode = 
	PREHEATANDMESH T_BED=80 T_EXTRUDER=140

[gcode_macro TEST]
gcode = 
	G90
	G1 X20 Y20 Z10 F1600
	G1 X120 Y120 F1600
	G1 X200 Y120 F1600
	G1 X200 Y200 F1600
	G1 X20 Y180 F1600
	G1 X200 Y20 F1600

[gcode_macro START_PRINT]
description = All what needs to be done at print start
gcode = 
	
	{% set BED_TEMP1 = bed_temperature_initial_layer_single|default(60)|float %}
	
	{% set EXTRUDER_TEMP1 = nozzle_temperature_initial_layer|default(220)|float %}
	
	
	M104 S{EXTRUDER_TEMP1}
	M190 S{BED_TEMP1}
	PRIME_LINE

[gcode_macro END_PRINT]
description = All what needs to be done at print end
gcode = 
	M104 S0
	M140 S0
	M106 S0
	G90
	G92 E0
	G1 Z300 X295 Y5 E-20 F9000.00
	M104 S0
	M84

[gcode_macro PRIME_LINE]
description = Do a prime line
gcode = 
	G28
	G92 E0
	G1 Z2.0 F3000
	G1 X5.1 Y20 Z0.28 F5000.0
	G1 X5.1 Y200.0 Z0.28 F1500.0 E15
	G1 X5.4 Y200.0 Z0.28 F5000.0
	G1 X5.4 Y20 Z0.28 F1500.0 E30
	G92 E0
	G1 E4 F300
	G1 Z2.0 F3000

[gcode_macro AXES_MAP_CALIBRATION]
gcode = 
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	{% set speed = params.SPEED|default(80)|float * 60 %}
	{% set accel = params.ACCEL|default(1500)|int %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(120)|int * 60 %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting accelerometer axe_map calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 8}
	G1 X{mid_x - 15} Y{mid_y - 15} F{feedrate_travel}
	G4 P500
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	G4 P1000
	G1 X{mid_x + 15} F{speed}
	G4 P1000
	G1 Y{mid_y + 15} F{speed}
	G4 P1000
	G1 Z{z_height + 15} F{speed}
	G4 P1000
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=axemap
	
	RESPOND MSG="Analysis of the movements..."
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION

[gcode_macro AXES_SHAPER_CALIBRATION]
description = Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.3)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set axis = params.AXIS|default("all")|string|lower %}
	{% set scv = params.SCV|default(None) %}
	{% set max_sm = params.MAX_SMOOTHING|default(None) %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set X, Y = False, False %}
	
	{% if axis == "all" %}
	{% set X, Y = True, True %}
	{% elif axis == "x" %}
	{% set X = True %}
	{% elif axis == "y" %}
	{% set Y = True %}
	{% else %}
	{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
	{% endif %}
	
	{% if scv is none %}
	{% set scv = printer.toolhead.square_corner_velocity %}
	{% endif %}
	
	{% if X %}
	TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="X axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	{% if Y %}
	TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Y axis frequency profile generation..."
	RESPOND MSG="This may take some time (1-3min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type shaper --scv {scv} {% if max_sm is not none %}--max_smoothing {max_sm}{% endif %} {% if keep_csv %}--keep_csv{% endif %}"
	{% endif %}
	
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro BELTS_SHAPER_CALIBRATION]
description = Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
gcode = 
	{% set min_freq = params.FREQ_START|default(5)|float %}
	{% set max_freq = params.FREQ_END|default(133.33)|float %}
	{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
	M400
	
	RESPOND MSG="Belts comparative frequency profile generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type belts {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"

[gcode_macro EXCITATE_AXIS_AT_FREQ]
description = Maintain a specified excitation frequency for a period of time to diagnose and locate a source of vibration
gcode = 
	{% set frequency = params.FREQUENCY|default(25)|int %}
	{% set time = params.TIME|default(10)|int %}
	{% set axis = params.AXIS|default("x")|string|lower %}
	
	{% if axis not in ["x", "y", "a", "b"] %}
	{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
	{% endif %}
	
	{% if axis == "a" %}
	{% set axis = "1,-1" %}
	{% elif axis == "b" %}
	{% set axis = "1,1" %}
	{% endif %}
	
	TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
	M400

[gcode_macro VIBRATIONS_CALIBRATION]
gcode = 
	{% set size = params.SIZE|default(60)|int %}
	{% set direction = params.DIRECTION|default('XY') %}
	{% set z_height = params.Z_HEIGHT|default(20)|int %}
	
	{% set min_speed = params.MIN_SPEED|default(20)|float * 60 %}
	{% set max_speed = params.MAX_SPEED|default(200)|float * 60 %}
	{% set speed_increment = params.SPEED_INCREMENT|default(2)|float * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set accel = params.ACCEL|default(3000)|int %}
	{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %}
	
	{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
	{% set keep_csv = params.KEEP_CSV|default(True) %}
	
	{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}
	{% set nb_samples = ((max_speed - min_speed) / speed_increment + 1) | int %}
	
	{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
	{% set old_accel = printer.toolhead.max_accel %}
	{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
	{% set old_sqv = printer.toolhead.square_corner_velocity %}
	
	{% set direction_factor = {
	'XY'  : {
	'start' : {'x': -0.5, 'y': -0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': -0.5, 'y': -0.5, 'z': 0.0 }
	}
	},
	'AB' : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'2' : {'x': 0.0, 'y': 0.0, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'ABXY' : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'2' : {'x': -0.5, 'y': 0.5, 'z': 0.0 },
	'3' : {'x': 0.5, 'y': 0.5, 'z': 0.0 },
	'4' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'5' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'B'  : {
	'start' : {'x': 0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': -0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'A'  : {
	'start' : {'x': -0.5, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.5, 'z': 0.0 }
	}
	},
	'X'  : {
	'start' : {'x': -0.5, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.5, 'y': 0.0, 'z': 0.0 },
	'1' : {'x': -0.5, 'y': 0.0, 'z': 0.0 }
	}
	},
	'Y'  : {
	'start' : {'x': 0.0, 'y': 0.5 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': -0.5, 'z': 0.0 },
	'1' : {'x': 0.0, 'y': 0.5, 'z': 0.0 }
	}
	},
	'Z'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factors' : {
	'0' : {'x': 0.0, 'y': 0.0, 'z': 1.0 },
	'1' : {'x': 0.0, 'y': 0.0, 'z': 0.0 }
	}
	},
	'E'  : {
	'start' : {'x': 0.0, 'y': 0.0 },
	'move_factor' : 0.05
	}
	}
	%}
	
	
	{% if not 'xyz' in printer.toolhead.homed_axes %}
	{ action_raise_error("Must Home printer first!") }
	{% endif %}
	
	{% if params.SPEED_INCREMENT|default(2)|float * 100 != (params.SPEED_INCREMENT|default(2)|float * 100)|int %}
	{ action_raise_error("Only 2 decimal digits are allowed for SPEED_INCREMENT") }
	{% endif %}
	
	{% if (size / (max_speed / 60)) < 0.25 and direction != 'E' %}
	{ action_raise_error("SIZE is too small for this MAX_SPEED. Increase SIZE or decrease MAX_SPEED!") }
	{% endif %}
	
	{% if not (direction in direction_factor) %}
	{ action_raise_error("DIRECTION is not valid. Only XY, AB, ABXY, A, B, X, Y, Z or E is allowed!") }
	{% endif %}
	
	{action_respond_info("")}
	{action_respond_info("Starting speed and vibration calibration")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION
	
	G90
	
	
	SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
	
	
	G1 Z{z_height} F{feedrate_travel / 10}
	G1 X{mid_x + (size * direction_factor[direction].start.x) } Y{mid_y + (size * direction_factor[direction].start.y)} F{feedrate_travel}
	
	
	{% for curr_sample in range(0, nb_samples) %}
	{% set curr_speed = min_speed + curr_sample * speed_increment %}
	RESPOND MSG="{"Current speed: %.2f mm/s" % (curr_speed / 60)|float}"
	
	ACCELEROMETER_MEASURE CHIP={accel_chip}
	{% if direction == 'E' %}
	G0 E{curr_speed*direction_factor[direction].move_factor} F{curr_speed}
	{% else %}
	{% for key, factor in direction_factor[direction].move_factors|dictsort %}
	G1 X{mid_x + (size * factor.x) } Y{mid_y + (size * factor.y)} Z{z_height + (size * factor.z)} F{curr_speed}
	{% endfor %}
	{% endif %}
	ACCELEROMETER_MEASURE CHIP={accel_chip} NAME=sp{("%.2f" % (curr_speed / 60)|float)|replace('.','_')}n1
	G4 P300
	
	M400
	{% endfor %}
	
	RESPOND MSG="Machine and motors vibration graph generation..."
	RESPOND MSG="This may take some time (3-5min)"
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type vibrations --axis_name {direction} --accel {accel|int} --chip_name {accel_chip} {% if keep_csv %}--keep_csv{% endif %}"
	M400
	RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
	
	
	SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
	
	RESTORE_GCODE_STATE NAME=STATE_VIBRATIONS_CALIBRATION

[gcode_shell_command shaketune]
command = ~/printer_data/config/K-ShakeTune/scripts/shaketune.sh
timeout = 600.0
verbose = True

[gcode_arcs]
resolution = 0.1

[gcode_macro CALIBRATE]
description = Calibrate the printer flow or pressure advance
gcode = 
	
	{% set TYPE = params.TYPE|default("")|string|lower %}
	
	
	{% set BED_TEMP = params.BED_TEMP|default(60)|float %}
	{% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(220)|float %}
	{% set center_x = printer.toolhead.axis_maximum.x|float / 2 %}
	{% set center_y = printer.toolhead.axis_maximum.y|float / 2 %}
	
	{% if TYPE=="flow" %}
	
	{% set computed_size = (center_x - 20)|string + '_' + (center_y - 20)|string + '_' + (center_x + 20)|string + '_' + (center_y + 20)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP} SIZE={computed_size}
	FLOW_MULTIPLIER_CALIBRATION EXTRUSION_WIDTH=0.471
	END_PRINT
	
	{% elif TYPE=="pa" %}
	
	{% set computed_size = (center_x - 60)|string + '_' + (center_y - 60)|string + '_' + (center_x + 60)|string + '_' + (center_y + 60)|string %}
	
	
	START_PRINT EXTRUDER_TEMP={EXTRUDER_TEMP} BED_TEMP={BED_TEMP}
	PRESSURE_ADVANCE_CALIBRATION
	END_PRINT
	
	{% else %}
	{action_respond_info("Trage bitte einen Testtyp ein = \"flow\" or \"pa\"!")}
	{action_raise_error("Kein Testtyp eingetragen.")}
	
	{% endif %}

[gcode_macro PRESSURE_ADVANCE_CALIBRATION]
description = Calibrate the pressure advance by printing a grid pattern
gcode = 
	{% set pa_start     = params.START|default(0.02)|float %}
	{% set pa_increment = params.INCREMENT|default(0.005)|float %}
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	
	{% set print_size      = params.PRINT_SIZE|default(120)|int %}
	{% set num_bands       = params.BANDS_LIMIT|default(999)|int %}
	{% set lines_per_band  = params.LINES_PER_BAND|default(6)|int %}
	{% set e_multiplier    = params.EXTRUSION_MULTIPLIER|default(1.25 if do_raft == 1 else 1.5)|float %},
	{% set retract_length  = params.RETRACT_LENGTH|default(0.6)|float %}
	{% set initial_purge   = params.PURGE_MM|default(8)|int %}
	
	{% set feedrate_control = params.CONTROL_SPEED|default(30)|int * 60 %}
	{% set feedrate_outer   = params.OUTER_SPEED|default(40)|int * 60 %}
	{% set feedrate_inner   = params.INNER_SPEED|default(120)|int * 60 %}
	{% set feedrate_travel  = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft    = params.RAFT_SPEED|default(120)|int * 60 %}
	{% set feedrate_z       = 5 * 60 %}
	{% set feedrate_retract = 50 * 60 %}
	
	{% set spacing_line  = params.LINE_SPACING|default(0.4)|float %}
	{% set spacing_band  = 2 %}
	{% set spacing_raft  = 2 %}
	
	{% set fast_line_ratio_percent = 50 %}
	
	{% set lines_per_band    = [2, lines_per_band]|max %}
	{% set e_multiplier      = [1, e_multiplier]|max %}
	{% set num_lines_control = (lines_per_band / 2)|round(0, 'floor')|int %}
	{% set num_lines_test    = (lines_per_band / 2)|round(0, 'ceil')|int %}
	{% set spacing_line      = spacing_line * (1 + e_multiplier - 1.25) %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set nozzle_diameter = printer.configfile.config['extruder'].nozzle_diameter|float %}
	{% set line_width    = nozzle_diameter * 1.25 %}
	{% set line_height   = nozzle_diameter / 2 %}
	{% set z_hop_height  = 2 * line_height %}
	{% set e_per_mm      = (line_width * line_height) / (3.1415 * (1.75/2)**2) %}
	{% set spacing_purge = line_height * 0.8 %}
	
	{% set spacing_raft   = (spacing_raft / line_width)|round * line_width %}
	{% set num_raft_lines = ([print_size, max_x]|min / spacing_raft)|round(0, 'floor')|int %}
	{% set print_width    = num_raft_lines * spacing_raft %}
	
	{% set band_height      = lines_per_band * line_width + (lines_per_band - 1) * spacing_line + spacing_band %}
	{% set bands_per_height = (([print_size, max_y]|min  - spacing_purge - 2 * line_width + spacing_band) / band_height)|round(0, 'floor')|int %}
	{% set num_bands        = [num_bands, bands_per_height]|min %}
	{% set print_height     = num_bands * band_height - spacing_band + spacing_purge +  2 * line_width %}
	
	{% set slow_line_length = ((print_width * (1 - fast_line_ratio_percent / 100) / 2) / spacing_raft)|round * spacing_raft + spacing_raft / 2 %}
	{% set fast_line_length = print_width - slow_line_length * 2 %}
	{% set thick_raft_num1 = (slow_line_length / spacing_raft)|round|int %}
	{% set thick_raft_num2  = num_raft_lines - thick_raft_num1 + 1 %}
	
	{% set x_start = max_x / 2 - print_width  / 2 %}
	{% set y_start = max_y / 2 - print_height / 2 %}
	SAVE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION
	{% set pa_saved = printer.configfile.settings['extruder'].pressure_advance %}
	SET_PRESSURE_ADVANCE ADVANCE={pa_start}
	
	{action_respond_info("")}
	{action_respond_info("Starte Pressure Advance calibration.")}
	{action_respond_info("Parameter: STARTWERT:%.4f" % pa_start)}
	{action_respond_info("Parameter: ANHEBUNG:%.4f" % pa_increment )}
	{action_respond_info("Parameter: ERZEUGE_RAFT:%.0f" % do_raft)}
	{action_respond_info("Parameter: BAURAUMBREITE:%.0f" % print_size)}
	{action_respond_info("Parameter: ANZAHL_TESTS:%.0f" % num_bands)}
	{action_respond_info("Parameter: LINIEN_PRO_TEST:%.0f" % lines_per_band)}
	{action_respond_info("Parameter: RETRACT:%.2f" % retract_length)}
	{action_respond_info("Parameter: PURGE_MM:%.0f" % initial_purge)}
	{action_respond_info("Parameter: SPEED_KONTROLLSTREIFEN:%.0f" % (feedrate_control / 60))}
	{action_respond_info("Parameter: SPEED_BEGINN:%.0f" % (feedrate_outer / 60))}
	{action_respond_info("Parameter: SPEED_MITTE:%.0f" % (feedrate_inner / 60))}
	{action_respond_info("Parameter: SPEED_TRAVEL:%.0f" % (feedrate_travel / 60))}
	{action_respond_info("Parameter: SPEED_RAFT:%.0f" % (feedrate_raft / 60))}
	{action_respond_info("Parameter: LINIEN_ABSTAND:%.2f" % spacing_line)}
	{action_respond_info("")}
	{action_respond_info("Dieser Vorgang kann mit normalen Mitteln nicht unterbrochen werden. Druecken Sie die Taste \"Not-Aus\", sobald der Druck offensichtlich zu hohe PA-Werte aufweist.")}
	{action_respond_info("")}
	{action_respond_info("PA des ersten Bands: %.4f" % pa_start)}
	{action_respond_info("PA des letzten Bands: %.4f" % (num_bands * pa_increment))}
	{action_respond_info("PA Anhebung pro Band: %.4f" % pa_increment)}
	{action_respond_info("Anzahl Baender: %d" % num_bands)}
	{action_respond_info("")}
	{action_respond_info("Angenommen, die erste Bandnummer ist 0")}
	{action_respond_info("PA = %.4f + (%.4f * band_number)" % (pa_start, pa_increment))}
	{action_respond_info("")}
	{action_respond_info("Aktualisieren Sie den Abschnitt [extruder] config und setzen Sie \"pressure_advance\" auf den von Ihnen berechneten Wert.")}
	
	
	
	M221 S100
	
	
	
	M117 Priming
	G90
	G0 X{x_start} Y{y_start} Z{line_height} F{feedrate_travel}
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{print_width}  E{print_width * e_per_mm} F{feedrate_raft / 2}
	G1 Y{line_width}   E{line_width * e_per_mm}  F{feedrate_raft / 2}
	G1 X-{print_width} E{print_width * e_per_mm} F{feedrate_raft / 2}
	
	
	
	
	{% if do_raft == 1 %}
	G0 F{feedrate_raft}
	
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	{% if curr_raft_line == thick_raft_num1 or curr_raft_line == thick_raft_num2 %}
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	G1 Y{loop.cycle(-1.0, 1.0) * print_height} E{print_height * e_per_mm}
	G1 X{line_width} E{line_width * e_per_mm}
	{% endif %}
	
	G1 Y{loop.cycle(1.0, -1.0) * print_height} E{print_height * e_per_mm}
	
	
	{% if not loop.last %}
	{% set horizontal_move = spacing_raft - (2 * line_width if curr_raft_line == thick_raft_num1 - 1 or curr_raft_line == thick_raft_num2 - 1 else 0) %}
	G1 X{horizontal_move} E{horizontal_move * e_per_mm}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	{% endif %}
	
	
	
	
	M117 Printing bands
	G90
	G0 X{x_start} Y{y_start + 2 * line_width + spacing_purge} F{feedrate_travel}
	G0 Z{line_height + (line_height if do_raft == 1 else 0)} F{feedrate_z}
	G91
	G1 E{retract_length} F{feedrate_retract}
	
	
	{% for curr_band_num in range(0, num_bands ) %}
	{% set outer_loop = loop %}
	
	{% set curr_pa_value = pa_start + curr_band_num * pa_increment %}
	SET_PRESSURE_ADVANCE ADVANCE={curr_pa_value}
	M117 Band {curr_band_num} PA {curr_pa_value|round(4)}
	
	
	{% for _ in range(num_lines_control) %}
	G1 X{print_width} E{print_width * e_per_mm * e_multiplier} F{feedrate_control}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G0 X-{print_width} Y{spacing_line + line_width} F{feedrate_travel}
	
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endfor %}
	
	
	{% for _ in range(num_lines_test) %}
	{% for data in [{'mm': slow_line_length, 'f': feedrate_outer}, {'mm': fast_line_length, 'f': feedrate_inner}, {'mm': slow_line_length, 'f': feedrate_outer}] %}
	G1 X{data.mm} E{data.mm * e_per_mm * e_multiplier} F{data.f}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	{% if not (outer_loop.last and loop.last) %}
	G0 X-{print_width} Y{(spacing_line if not loop.last else spacing_band) + line_width} F{feedrate_travel}
	G0 Z-{z_hop_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z20 F{feedrate_z}
	G0 X-{print_width / 2} Y{[50, max_y - (y_start + print_height)]|min} F{feedrate_travel}
	
	M117
	SET_PRESSURE_ADVANCE ADVANCE={pa_saved}
	RESTORE_GCODE_STATE NAME=STATE_PRESSURE_ADVANCE_CALIBRATION

[gcode_macro _FLOW_CALIB_VARIABLES]
variable_last_shell_thickness = 0.0
variable_last_evalue = 0.0
gcode = 

[gcode_macro FLOW_MULTIPLIER_CALIBRATION]
description = Print a small tower to calibrate the extrusion flow multiplier by measuring the shell
gcode = 
	
	
	
	{% set do_raft = params.DO_RAFT|default(1)|int %}
	{% set do_retract = params.DO_RECTRACT|default(0)|int %}
	{% set print_size = params.PRINT_SIZE|default(40)|int %}
	{% set print_height = params.HEIGHT|default(15)|int %}
	{% set corner_radius = params.CORNER_RADIUS|default(8)|int %}
	{% set number_of_perimeters = params.PERIMETERS|default(2)|int %}
	{% set fan_speed = params.FAN_SPEED|default(20)|int %}
	
	{% set e_multiplier = params.EXTRUSION_MULTIPLIER|default(1.00)|float %}
	{% set filament_diameter = params.FILAMENT_DIAMETER|default(1.75)|float %}
	{% set extrusion_width = params.EXTRUSION_WIDTH|default(0.4)|float %}
	{% set layer_height = params.LAYER_HEIGHT|default(0.2)|float %}
	
	{% set retract_length = params.RETRACT_LENGTH|default(0.5)|float %}
	{% set initial_purge = params.PURGE_MM|default(1)|int %}
	{% set z_hop_height  = 2 * layer_height %}
	
	{% set feedrate_print = params.CONTROL_SPEED|default(100)|int * 60 %}
	{% set feedrate_travel = params.TRAVEL_SPEED|default(200)|int * 60 %}
	{% set feedrate_raft = params.RAFT_SPEED|default(60)|int * 60 %}
	{% set feedrate_z = params.Z_LIFT_SPEED|default(20)|int * 60 %}
	{% set feedrate_retract = params.RETRACT_SPEED|default(50)|int * 60 %}
	
	
	
	
	{% set e_per_mm = ((extrusion_width - layer_height) * layer_height + 3.14159 * (layer_height / 2)**2) / (3.14159 * (filament_diameter / 2)**2) %}
	{% set spacing = extrusion_width - layer_height * (1 - 3.14159 / 4) %}
	{% set shell_thickness = extrusion_width + (number_of_perimeters|float - 1) * spacing %}
	
	{% set max_x = printer.toolhead.axis_maximum.x|float %}
	{% set max_y = printer.toolhead.axis_maximum.y|float %}
	{% set x_start = max_x / 2 - print_size / 2 %}
	{% set y_start = max_y / 2 - print_size / 2 %}
	{% set x_end = x_start + print_size %}
	{% set y_end = y_start + print_size %}
	
	{% set num_raft_lines = ([print_size, max_x]|min / spacing)|round(0, 'floor')|int %}
	{% set raft_size = num_raft_lines * spacing %}
	
	
	
	
	{action_respond_info("")}
	{action_respond_info("Starting extrusion flow calibration print")}
	{action_respond_info("This operation can not be interrupted by normal means. Hit the \"emergency stop\" button to stop it if needed")}
	{action_respond_info("")}
	{action_respond_info("Exrusion multiplier used: %.4f" % e_multiplier)}
	{action_respond_info("Number of perimeters to print: %d" % number_of_perimeters)}
	{action_respond_info("THEORIC SHELL THICKNESS: %.4f" % shell_thickness)}
	{action_respond_info("")}
	{action_respond_info("Measure the shell thickness using a caliper or micrometer. Then call the computation macro with the measured value:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_respond_info("")}
	
	SAVE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION
	
	
	
	
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_shell_thickness VALUE={shell_thickness}
	SET_GCODE_VARIABLE MACRO=_FLOW_CALIB_VARIABLES VARIABLE=last_evalue VALUE={e_multiplier}
	
	
	
	
	G90
	M83
	G92 E0.0
	G0 X{x_start} Y{y_start - 5} Z{layer_height} F{feedrate_travel}
	
	G91
	G1 E{initial_purge} F{5 * 60}
	G1 X{raft_size} E{raft_size * e_per_mm * 1.5} F{feedrate_raft / 2}
	G1 Y-{extrusion_width} E{extrusion_width * e_per_mm} F{feedrate_raft / 2}
	G1 X-{raft_size} E{raft_size * e_per_mm} F{feedrate_raft / 2}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	
	G90
	G0 X{x_start} Y{y_start} F{feedrate_travel}
	G1 Z{layer_height} F{feedrate_z}
	G1 E{retract_length} F{feedrate_retract}
	
	
	M221 S{e_multiplier * 100}
	
	
	
	
	{% if do_raft == 1 %}
	G91
	{% for curr_raft_line in range(1, num_raft_lines + 2) %}
	
	G1 Y{loop.cycle(1.0, -1.0) * raft_size} E{raft_size * e_per_mm} F{feedrate_raft}
	
	
	{% if not loop.last %}
	G1 X{spacing} E{spacing * e_per_mm} F{feedrate_raft}
	{% endif %}
	{% endfor %}
	
	G1 E-{retract_length} F{feedrate_retract}
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	
	
	
	
	G90
	M106 S{fan_speed * 255 / 100}
	
	
	{% for curr_layer in range(1, (print_height / layer_height)|round|int) %}
	G0 X{x_start + corner_radius} Y{y_start} F{feedrate_travel}
	G1 Z{(curr_layer * layer_height) + (layer_height if do_raft == 1 else 0)} F{feedrate_z}
	
	
	{% for perim_num in range(number_of_perimeters) %}
	
	{% set perim_offset = perim_num * spacing %}
	{% set perim_radius = corner_radius - (perim_num * spacing) %}
	
	
	G1 X{x_start + corner_radius} Y{y_start + perim_offset} F{feedrate_travel}
	{% if do_retract == 1 %}
	G1 E{retract_length} F{feedrate_retract}
	{% endif %}
	
	
	G1 X{x_end - corner_radius} Y{y_start + perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - perim_offset} Y{y_start + corner_radius} J{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_end - perim_offset} Y{y_end - corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_end - corner_radius} Y{y_end - perim_offset} I-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + corner_radius} Y{y_end - perim_offset} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + perim_offset} Y{y_end - corner_radius} J-{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	G1 X{x_start + perim_offset} Y{y_start + corner_radius} E{(print_size - (2 * corner_radius)) * e_per_mm} F{feedrate_print}
	G3 X{x_start + corner_radius} Y{y_start + perim_offset} I{perim_radius} E{(3.14159 / 2) * perim_radius * e_per_mm} F{feedrate_print}
	
	{% if do_retract == 1 %}
	G1 E-{retract_length} F{feedrate_retract}
	{% endif %}
	{% endfor %}
	
	{% if do_retract == 1 %}
	G91
	G0 Z{z_hop_height} F{feedrate_z}
	G90
	{% endif %}
	{% endfor %}
	
	
	
	
	G1 E-{retract_length} F{feedrate_retract}
	G91
	G0 Z20 F{feedrate_travel}
	
	RESTORE_GCODE_STATE NAME=STATE_FLOW_MULTIPLIER_CALIBRATION

[gcode_macro COMPUTE_FLOW_MULTIPLIER]
description = Compute a new flow multiplier by using the measured shell thickness on the calibration print
gcode = 
	{% set evalue = params.OLD_EXTRUSION_MULTIPLIER|default(0.0)|float %}
	{% set theorical_thickness = params.THEORICAL_THICKNESS|default(0.0)|float %}
	{% set measured_thickness = params.MEASURED_THICKNESS|default(0.0)|float %}
	
	
	{% if evalue == 0.0 %}
	{% set last_evalue = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_evalue %}
	
	
	{% if last_evalue == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_evalue = last_evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	{% else %}
	{% set final_evalue = evalue %}
	{action_respond_info("Using OLD_EXTRUSION_MULTIPLIER: %.3f" % final_evalue)}
	{% endif %}
	
	
	{% if theorical_thickness == 0.0 %}
	{% set last_shell_thickness = printer["gcode_macro _FLOW_CALIB_VARIABLES"].last_shell_thickness %}
	
	
	{% if last_shell_thickness == 0.0 %}
	{action_respond_info("It seems that no calibration print was run prior to this (or a restart of Klipper occured).")}
	{action_respond_info("You can still manually use it by calling again this macro like that:")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER OLD_EXTRUSION_MULTIPLIER=xxx.xxx THEORICAL_THICKNESS=xxx.xxx MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set final_theorical_thickness = last_shell_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	{% else %}
	{% set final_theorical_thickness = theorical_thickness %}
	{action_respond_info("Using THEORICAL_THICKNESS: %.3f" % final_theorical_thickness)}
	{% endif %}
	
	
	{% if measured_thickness == 0.0 %}
	{action_respond_info("You must use a caliper or micrometer to measure the calibration print shell thickness and call this macro with the measured value !!!")}
	{action_respond_info("COMPUTE_FLOW_MULTIPLIER MEASURED_THICKNESS=xxx.xxx")}
	{action_raise_error("not enough data to perform the computation of the new flow !")}
	{% else %}
	{% set new_evalue = final_theorical_thickness * final_evalue / measured_thickness %}
	{action_respond_info("NEW COMPUTED FLOW VALUE: %.3f" % new_evalue)}
	{action_respond_info("Use this new value as extrusion multiplier in your slicer of choice")}
	{action_respond_info("")}
	{% endif %}

[mcu]
serial = /dev/ttyUSB0
restart_method = command

[temperature_sensor raspberry_pi]
sensor_type = temperature_host
min_temp = 0
max_temp = 85

[printer]
kinematics = corexy
max_velocity = 150
max_accel = 2000
square_corner_velocity = 5.0
max_z_velocity = 30
max_z_accel = 500

[stepper_x]
step_pin = PE3
dir_pin = !PE2
enable_pin = !PE4
endstop_pin = tmc2209_stepper_x:virtual_endstop
position_endstop = 0
position_max = 300
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_y]
step_pin = PE0
dir_pin = !PB9
enable_pin = !PE1
endstop_pin = tmc2209_stepper_y:virtual_endstop
position_endstop = 0
position_max = 305
homing_speed = 50
homing_retract_dist = 0
microsteps = 16
rotation_distance = 40

[stepper_z]
step_pin = PB5
dir_pin = !PB4
enable_pin = !PB8
endstop_pin = probe:z_virtual_endstop
position_max = 340
rotation_distance = 8
microsteps = 16
homing_retract_dist = 5

[extruder]
step_pin = !PD6
dir_pin = PD3
enable_pin = !PB3
microsteps = 16
full_steps_per_rotation = 200
gear_ratio = 95.4647:10
rotation_distance = 53.66
nozzle_diameter = 0.400
filament_diameter = 1.750
heater_pin = PC3
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC1
min_temp = 0
max_temp = 260
max_extrude_only_distance = 151
min_extrude_temp = 10
max_extrude_cross_section = 2
step_pulse_duration = 0.00002
control = pid
pid_kp = 24.590
pid_ki = 1.233
pid_kd = 122.644

[firmware_retraction]
retract_length = 0.3
retract_speed = 40
unretract_extra_length = 0
unretract_speed = 40

[tmc2209 stepper_x]
uart_pin = PA3
run_current = 0.85
diag_pin = PA15
driver_sgthrs = 100

[tmc2209 stepper_y]
uart_pin = PA6
run_current = 0.90
diag_pin = PA12
driver_sgthrs = 80

[tmc2209 stepper_z]
uart_pin = PA1
run_current = 1.3

[tmc2209 extruder]
uart_pin = PE5
run_current = 0.85
stealthchop_threshold = 0

[safe_z_home]
home_xy_position = 150,190
speed = 100.0
z_hop = 5.0
z_hop_speed = 5.0

[bltouch]
sensor_pin = ^PC4
control_pin = PA8
samples = 2
sample_retract_dist = 5
x_offset = 0
y_offset = -41
z_offset = 0.69

[bed_mesh]
speed = 120
horizontal_move_z = 5
mesh_min = 10, 20
mesh_max = 295, 264
probe_count = 6,6
zero_reference_position = 150,190

[heater_bed]
heater_pin = PA0
sensor_type = EPCOS 100K B57560G104F
sensor_pin = PC0
min_temp = 0
max_temp = 100
control = pid
pid_kp = 61.929
pid_ki = 1.803
pid_kd = 531.815

[fan]
pin = PB1

[heater_fan Extruder]
pin = PB0
max_power = 1.0
hardware_pwm = false
heater = extruder
heater_temp = 40.0
fan_speed = 1.0

[temperature_sensor mcu_temp]
sensor_type = temperature_mcu
min_temp = 0
max_temp = 80

[screws_tilt_adjust]
screw1 = 30, 80
screw1_name = Vorn Links
screw2 = 270, 80
screw2_name = Vorn Rechts
screw3 = 270, 305
screw3_name = Hinten Rechts
screw4 = 30, 305
screw4_name = Hinten Links
speed = 50
horizontal_move_z = 10
screw_thread = CW-M4

[static_digital_output reset_display]
pins = !PC6, !PD13

[bed_mesh default]
version = 1
points = 
	-0.128039, 0.040711, 0.099461, 0.048211, -0.111789, -0.244289
	-0.200539, -0.033039, 0.079461, 0.064461, -0.156789, -0.241789
	-0.289289, -0.135539, -0.018039, 0.036961, -0.111789, -0.256789
	-0.209289, -0.126789, -0.034289, -0.015539, -0.141789, -0.198039
	-0.194289, -0.096789, -0.053039, 0.065711, -0.078039, -0.216789
	-0.189289, -0.023039, -0.164289, -0.103039, -0.195539, -0.195539
x_count = 6
y_count = 6
mesh_x_pps = 2
mesh_y_pps = 2
algo = lagrange
tension = 0.2
min_x = 10.0
max_x = 295.0
min_y = 20.0
max_y = 264.0
=======================
Extruder max_extrude_ratio=0.831503
mcu 'mcu': Starting serial connect
webhooks client 1965977456: New connection
webhooks client 1965977456: Client info {'program': 'Moonraker', 'version': 'v0.8.0-325-g99b97af'}
Loaded MCU 'mcu' 106 commands (v0.12.0-115-gb98375b3 / gcc: (15:8-2019-q3-1+b1) 8.3.1 20190703 (release) [gcc-8-branch revision 273027] binutils: (2.34-4+rpi1+14) 2.34)
MCU 'mcu' config: ADC_MAX=4095 BUS_PINS_i2c1=PB6,PB7 BUS_PINS_i2c1a=PB8,PB9 BUS_PINS_i2c2=PB10,PB11 BUS_PINS_spi1=PA6,PA7,PA5 BUS_PINS_spi1a=PB4,PB5,PB3 BUS_PINS_spi2=PB14,PB15,PB13 BUS_PINS_spi3=PB4,PB5,PB3 CLOCK_FREQ=72000000 INITIAL_PINS=!PC6,!PD13 MCU=stm32f103xe PWM_MAX=255 RECEIVE_WINDOW=192 RESERVE_PINS_serial=PB11,PB10 SERIAL_BAUD=250000 STATS_SUMSQ_BASE=256 STEPPER_BOTH_EDGE=1
mcu_temperature 'mcu' nominal base=357.558140 slope=-767.441860
Sending MCU 'mcu' printer configuration...
Configured MCU 'mcu' (1024 moves)
bed_mesh: generated points
Index |  Tool Adjusted  |   Probe
  0   | (10.0, 61.0)    | (10.0, 20.0)
  1   | (67.0, 61.0)    | (67.0, 20.0)
  2   | (124.0, 61.0)   | (124.0, 20.0)
  3   | (181.0, 61.0)   | (181.0, 20.0)
  4   | (238.0, 61.0)   | (238.0, 20.0)
  5   | (295.0, 61.0)   | (295.0, 20.0)
  6   | (295.0, 109.8)  | (295.0, 68.8)
  7   | (238.0, 109.8)  | (238.0, 68.8)
  8   | (181.0, 109.8)  | (181.0, 68.8)
  9   | (124.0, 109.8)  | (124.0, 68.8)
  10  | (67.0, 109.8)   | (67.0, 68.8)
  11  | (10.0, 109.8)   | (10.0, 68.8)
  12  | (10.0, 158.6)   | (10.0, 117.6)
  13  | (67.0, 158.6)   | (67.0, 117.6)
  14  | (124.0, 158.6)  | (124.0, 117.6)
  15  | (181.0, 158.6)  | (181.0, 117.6)
  16  | (238.0, 158.6)  | (238.0, 117.6)
  17  | (295.0, 158.6)  | (295.0, 117.6)
  18  | (295.0, 207.4)  | (295.0, 166.4)
  19  | (238.0, 207.4)  | (238.0, 166.4)
  20  | (181.0, 207.4)  | (181.0, 166.4)
  21  | (124.0, 207.4)  | (124.0, 166.4)
  22  | (67.0, 207.4)   | (67.0, 166.4)
  23  | (10.0, 207.4)   | (10.0, 166.4)
  24  | (10.0, 256.2)   | (10.0, 215.2)
  25  | (67.0, 256.2)   | (67.0, 215.2)
  26  | (124.0, 256.2)  | (124.0, 215.2)
  27  | (181.0, 256.2)  | (181.0, 215.2)
  28  | (238.0, 256.2)  | (238.0, 215.2)
  29  | (295.0, 256.2)  | (295.0, 215.2)
  30  | (295.0, 305.0)  | (295.0, 264.0)
  31  | (238.0, 305.0)  | (238.0, 264.0)
  32  | (181.0, 305.0)  | (181.0, 264.0)
  33  | (124.0, 305.0)  | (124.0, 264.0)
  34  | (67.0, 305.0)   | (67.0, 264.0)
  35  | (10.0, 305.0)   | (10.0, 264.0)
bed_mesh: zero_reference_position is (150.00, 190.00)
Starting heater checks for heater_bed
Starting heater checks for extruder
Stats 3417.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2427 bytes_read=5676 bytes_retransmit=9 bytes_invalid=0 send_seq=202 receive_seq=201 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=71995668  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=30.4 sysload=0.63 cputime=139.942 memavail=634416 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=0.0 pwm=0.000
webhooks: registering remote method 'shutdown_machine' for connection id: 1965977456
webhooks: registering remote method 'reboot_machine' for connection id: 1965977456
webhooks: registering remote method 'pause_job_queue' for connection id: 1965977456
webhooks: registering remote method 'start_job_queue' for connection id: 1965977456
Stats 3418.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2448 bytes_read=5852 bytes_retransmit=9 bytes_invalid=0 send_seq=204 receive_seq=204 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=71999043  raspberry_pi: temp=56.9 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=26.7 sysload=0.63 cputime=140.014 memavail=634988 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.0 pwm=0.000
Stats 3419.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2454 bytes_read=6003 bytes_retransmit=9 bytes_invalid=0 send_seq=205 receive_seq=205 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72000477  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.3 sysload=0.63 cputime=140.084 memavail=639236 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.1 pwm=0.000
Stats 3420.3: gcodein=0  mcu: mcu_awake=0.008 mcu_task_avg=0.000029 mcu_task_stddev=0.000040 bytes_write=2460 bytes_read=6184 bytes_retransmit=9 bytes_invalid=0 send_seq=206 receive_seq=206 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72001287  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.63 cputime=140.114 memavail=637108 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=65.1 pwm=0.000
Stats 3421.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=2466 bytes_read=6365 bytes_retransmit=9 bytes_invalid=0 send_seq=207 receive_seq=207 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72001497  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.7 sysload=0.63 cputime=140.141 memavail=637792 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=64.4 pwm=0.000
Stats 3422.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=2472 bytes_read=6516 bytes_retransmit=9 bytes_invalid=0 send_seq=208 receive_seq=208 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72001646  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.0 sysload=0.58 cputime=140.166 memavail=637316 print_time=0.000 buffer_time=0.000 print_stall=0 extruder: target=0 temp=63.9 pwm=0.000
Heater extruder approaching new target of 210.000
Stats 3423.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=2494 bytes_read=6717 bytes_retransmit=9 bytes_invalid=0 send_seq=210 receive_seq=210 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72001771  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.3 sysload=0.58 cputime=140.195 memavail=640296 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=63.7 pwm=1.000
Stats 3424.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=2500 bytes_read=6868 bytes_retransmit=9 bytes_invalid=0 send_seq=211 receive_seq=211 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72001844  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.58 cputime=140.215 memavail=638104 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=63.1 pwm=1.000
Stats 3425.3: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000021 mcu_task_stddev=0.000011 bytes_write=2506 bytes_read=7019 bytes_retransmit=9 bytes_invalid=0 send_seq=212 receive_seq=212 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72001949  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.58 cputime=140.241 memavail=640284 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=63.2 pwm=1.000
Stats 3426.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2512 bytes_read=7229 bytes_retransmit=9 bytes_invalid=0 send_seq=213 receive_seq=213 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002056  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.3 sysload=0.58 cputime=140.268 memavail=638576 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=63.5 pwm=1.000
Stats 3427.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2534 bytes_read=7385 bytes_retransmit=9 bytes_invalid=0 send_seq=215 receive_seq=215 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002137  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=25.6 sysload=0.54 cputime=140.292 memavail=638128 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=63.6 pwm=1.000
Stats 3428.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2540 bytes_read=7536 bytes_retransmit=9 bytes_invalid=0 send_seq=216 receive_seq=216 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002213  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.2 sysload=0.54 cputime=140.315 memavail=640728 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=64.4 pwm=1.000
Stats 3429.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2546 bytes_read=7732 bytes_retransmit=9 bytes_invalid=0 send_seq=217 receive_seq=217 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002227  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.54 cputime=140.337 memavail=640340 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=65.5 pwm=1.000
Stats 3430.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2552 bytes_read=7883 bytes_retransmit=9 bytes_invalid=0 send_seq=218 receive_seq=218 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002263  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.0 sysload=0.54 cputime=140.363 memavail=639668 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=66.8 pwm=1.000
Stats 3431.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2574 bytes_read=8053 bytes_retransmit=9 bytes_invalid=0 send_seq=220 receive_seq=220 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002297  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.54 cputime=140.390 memavail=640300 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=68.1 pwm=1.000
Stats 3432.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2580 bytes_read=8249 bytes_retransmit=9 bytes_invalid=0 send_seq=221 receive_seq=221 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002320  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.5 sysload=0.49 cputime=140.417 memavail=639824 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=69.8 pwm=1.000
Stats 3433.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2586 bytes_read=8400 bytes_retransmit=9 bytes_invalid=0 send_seq=222 receive_seq=222 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002357  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.4 sysload=0.49 cputime=140.443 memavail=640808 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=71.0 pwm=1.000
Stats 3434.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2598 bytes_read=8567 bytes_retransmit=9 bytes_invalid=0 send_seq=224 receive_seq=224 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002413  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.49 cputime=140.475 memavail=640280 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=72.5 pwm=1.000
Stats 3435.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2620 bytes_read=8768 bytes_retransmit=9 bytes_invalid=0 send_seq=226 receive_seq=226 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002433  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.3 sysload=0.49 cputime=140.510 memavail=639996 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=74.8 pwm=1.000
Stats 3436.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2626 bytes_read=8933 bytes_retransmit=9 bytes_invalid=0 send_seq=227 receive_seq=227 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002447  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.49 cputime=140.539 memavail=639520 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=76.2 pwm=1.000
Stats 3437.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2632 bytes_read=9084 bytes_retransmit=9 bytes_invalid=0 send_seq=228 receive_seq=228 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002459  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.2 pwm=0.000 mcu_temp: temp=31.0 sysload=0.45 cputime=140.567 memavail=639072 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=78.1 pwm=1.000
Stats 3438.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2638 bytes_read=9280 bytes_retransmit=9 bytes_invalid=0 send_seq=229 receive_seq=229 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002475  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.45 cputime=140.592 memavail=639808 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=80.7 pwm=1.000
Stats 3439.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2655 bytes_read=9431 bytes_retransmit=9 bytes_invalid=0 send_seq=230 receive_seq=230 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002501  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.45 cputime=140.614 memavail=638008 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=82.5 pwm=1.000
Stats 3440.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2661 bytes_read=9582 bytes_retransmit=9 bytes_invalid=0 send_seq=231 receive_seq=231 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002538  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.45 cputime=140.641 memavail=637784 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=84.1 pwm=1.000
Stats 3441.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2667 bytes_read=9792 bytes_retransmit=9 bytes_invalid=0 send_seq=232 receive_seq=232 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002544  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.45 cputime=140.670 memavail=636860 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=86.4 pwm=1.000
Stats 3442.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2673 bytes_read=9943 bytes_retransmit=9 bytes_invalid=0 send_seq=233 receive_seq=233 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002548  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.7 sysload=0.42 cputime=140.697 memavail=636412 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=88.5 pwm=1.000
Stats 3443.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2679 bytes_read=10094 bytes_retransmit=9 bytes_invalid=0 send_seq=234 receive_seq=234 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002548  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=30.8 sysload=0.42 cputime=140.722 memavail=640568 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=90.1 pwm=1.000
Stats 3444.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2701 bytes_read=10295 bytes_retransmit=9 bytes_invalid=0 send_seq=236 receive_seq=236 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002555  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.42 cputime=140.746 memavail=638796 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=92.7 pwm=1.000
Stats 3445.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2707 bytes_read=10446 bytes_retransmit=9 bytes_invalid=0 send_seq=237 receive_seq=237 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002606  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.5 sysload=0.42 cputime=140.777 memavail=640948 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=94.5 pwm=1.000
Stats 3446.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2713 bytes_read=10597 bytes_retransmit=9 bytes_invalid=0 send_seq=238 receive_seq=238 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002610  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.42 cputime=140.803 memavail=640248 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=96.1 pwm=1.000
Stats 3447.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2719 bytes_read=10807 bytes_retransmit=9 bytes_invalid=0 send_seq=239 receive_seq=239 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002612  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=27.2 sysload=0.38 cputime=140.834 memavail=640024 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=98.8 pwm=1.000
Stats 3448.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2741 bytes_read=10963 bytes_retransmit=9 bytes_invalid=0 send_seq=241 receive_seq=241 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002614  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.0 sysload=0.38 cputime=140.858 memavail=640520 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=100.4 pwm=1.000
Stats 3449.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2747 bytes_read=11129 bytes_retransmit=9 bytes_invalid=0 send_seq=242 receive_seq=242 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002612  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=26.4 sysload=0.38 cputime=140.880 memavail=640172 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=102.1 pwm=1.000
Stats 3450.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2753 bytes_read=11310 bytes_retransmit=9 bytes_invalid=0 send_seq=243 receive_seq=243 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002615  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.38 cputime=140.907 memavail=639472 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=104.3 pwm=1.000
Stats 3451.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2759 bytes_read=11461 bytes_retransmit=9 bytes_invalid=0 send_seq=244 receive_seq=244 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002633  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.38 cputime=140.932 memavail=639248 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=106.2 pwm=1.000
Stats 3452.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2781 bytes_read=11646 bytes_retransmit=9 bytes_invalid=0 send_seq=246 receive_seq=246 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.35 cputime=140.960 memavail=640068 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=108.0 pwm=1.000
Stats 3453.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2787 bytes_read=11827 bytes_retransmit=9 bytes_invalid=0 send_seq=247 receive_seq=247 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002643  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.35 cputime=140.985 memavail=640996 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=110.4 pwm=1.000
Stats 3454.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2793 bytes_read=11978 bytes_retransmit=9 bytes_invalid=0 send_seq=248 receive_seq=248 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.5 sysload=0.35 cputime=141.006 memavail=638584 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=112.0 pwm=1.000
Stats 3455.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2799 bytes_read=12144 bytes_retransmit=9 bytes_invalid=0 send_seq=249 receive_seq=249 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002644  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.35 cputime=141.031 memavail=638360 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=113.5 pwm=1.000
Stats 3456.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2821 bytes_read=12330 bytes_retransmit=9 bytes_invalid=0 send_seq=251 receive_seq=251 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002645  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.4 sysload=0.35 cputime=141.058 memavail=640112 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=115.8 pwm=1.000
Stats 3457.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2827 bytes_read=12495 bytes_retransmit=9 bytes_invalid=0 send_seq=252 receive_seq=252 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002646  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=27.4 sysload=0.32 cputime=141.085 memavail=639664 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=117.4 pwm=1.000
Stats 3458.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2833 bytes_read=12661 bytes_retransmit=9 bytes_invalid=0 send_seq=253 receive_seq=253 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002665  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.5 sysload=0.32 cputime=141.110 memavail=640748 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=118.9 pwm=1.000
Stats 3459.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2839 bytes_read=12842 bytes_retransmit=9 bytes_invalid=0 send_seq=254 receive_seq=254 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002676  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.6 sysload=0.32 cputime=141.132 memavail=640268 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=121.2 pwm=1.000
Stats 3460.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2861 bytes_read=12998 bytes_retransmit=9 bytes_invalid=0 send_seq=256 receive_seq=256 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=29.0 sysload=0.32 cputime=141.159 memavail=640572 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=122.7 pwm=1.000
Stats 3461.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2867 bytes_read=13164 bytes_retransmit=9 bytes_invalid=0 send_seq=257 receive_seq=257 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.32 cputime=141.187 memavail=639872 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=124.2 pwm=1.000
Stats 3462.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2873 bytes_read=13359 bytes_retransmit=9 bytes_invalid=0 send_seq=258 receive_seq=258 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.30 cputime=141.216 memavail=639144 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=126.3 pwm=1.000
Stats 3463.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2879 bytes_read=13510 bytes_retransmit=9 bytes_invalid=0 send_seq=259 receive_seq=259 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002683  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.30 cputime=141.241 memavail=640700 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=127.7 pwm=1.000
Stats 3464.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2885 bytes_read=13674 bytes_retransmit=9 bytes_invalid=0 send_seq=260 receive_seq=260 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=27.6 sysload=0.30 cputime=141.264 memavail=638596 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=129.4 pwm=1.000
Stats 3465.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2907 bytes_read=13856 bytes_retransmit=9 bytes_invalid=0 send_seq=262 receive_seq=262 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002685  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.30 cputime=141.292 memavail=637896 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=131.2 pwm=1.000
Stats 3466.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2913 bytes_read=14004 bytes_retransmit=9 bytes_invalid=0 send_seq=263 receive_seq=263 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002687  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.7 sysload=0.30 cputime=141.317 memavail=637896 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=132.7 pwm=1.000
Stats 3467.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2919 bytes_read=14181 bytes_retransmit=9 bytes_invalid=0 send_seq=264 receive_seq=264 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002688  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.7 sysload=0.27 cputime=141.348 memavail=636944 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=134.2 pwm=1.000
Stats 3468.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2925 bytes_read=14358 bytes_retransmit=9 bytes_invalid=0 send_seq=265 receive_seq=265 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002686  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=26.9 sysload=0.27 cputime=141.377 memavail=640772 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=136.3 pwm=1.000
Stats 3469.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2947 bytes_read=14511 bytes_retransmit=9 bytes_invalid=0 send_seq=267 receive_seq=267 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.27 cputime=141.401 memavail=640152 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=137.7 pwm=1.000
Stats 3470.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2953 bytes_read=14666 bytes_retransmit=9 bytes_invalid=0 send_seq=268 receive_seq=268 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.27 cputime=141.430 memavail=640148 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=139.0 pwm=1.000
Stats 3471.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2959 bytes_read=14830 bytes_retransmit=9 bytes_invalid=0 send_seq=269 receive_seq=269 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002682  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.27 cputime=141.457 memavail=640148 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=140.8 pwm=1.000
Stats 3472.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2965 bytes_read=14982 bytes_retransmit=9 bytes_invalid=0 send_seq=270 receive_seq=270 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002681  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.25 cputime=141.483 memavail=639924 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=142.4 pwm=1.000
Stats 3473.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2987 bytes_read=15140 bytes_retransmit=9 bytes_invalid=0 send_seq=272 receive_seq=272 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=28.0 sysload=0.25 cputime=141.507 memavail=640848 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=143.7 pwm=1.000
Stats 3474.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2993 bytes_read=15317 bytes_retransmit=9 bytes_invalid=0 send_seq=273 receive_seq=273 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002677  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.25 cputime=141.529 memavail=638628 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=145.6 pwm=1.000
Stats 3475.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=2999 bytes_read=15465 bytes_retransmit=9 bytes_invalid=0 send_seq=274 receive_seq=274 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002678  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.6 sysload=0.25 cputime=141.556 memavail=638180 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=146.9 pwm=1.000
Stats 3476.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3005 bytes_read=15628 bytes_retransmit=9 bytes_invalid=0 send_seq=275 receive_seq=275 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002679  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.3 pwm=0.000 mcu_temp: temp=28.0 sysload=0.25 cputime=141.586 memavail=637732 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=148.2 pwm=1.000
Stats 3477.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3027 bytes_read=15824 bytes_retransmit=9 bytes_invalid=0 send_seq=277 receive_seq=277 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002680  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=27.2 sysload=0.23 cputime=141.616 memavail=637732 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=150.1 pwm=1.000
Stats 3478.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3033 bytes_read=15972 bytes_retransmit=9 bytes_invalid=0 send_seq=278 receive_seq=278 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=25.9 sysload=0.23 cputime=141.643 memavail=640700 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=151.2 pwm=1.000
Stats 3479.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3039 bytes_read=16135 bytes_retransmit=9 bytes_invalid=0 send_seq=279 receive_seq=279 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.4 pwm=0.000 mcu_temp: temp=30.4 sysload=0.23 cputime=141.662 memavail=639964 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=152.5 pwm=1.000
Stats 3480.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3045 bytes_read=16312 bytes_retransmit=9 bytes_invalid=0 send_seq=280 receive_seq=280 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002698  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.23 cputime=141.690 memavail=640704 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=154.2 pwm=1.000
Stats 3481.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3067 bytes_read=16465 bytes_retransmit=9 bytes_invalid=0 send_seq=282 receive_seq=282 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=28.7 sysload=0.23 cputime=141.718 memavail=640228 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=155.5 pwm=1.000
Stats 3482.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3073 bytes_read=16642 bytes_retransmit=9 bytes_invalid=0 send_seq=283 receive_seq=283 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.21 cputime=141.745 memavail=639500 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=156.8 pwm=1.000
Stats 3483.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3079 bytes_read=16819 bytes_retransmit=9 bytes_invalid=0 send_seq=284 receive_seq=284 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.1 sysload=0.21 cputime=141.771 memavail=640948 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=158.5 pwm=1.000
Stats 3484.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3085 bytes_read=16967 bytes_retransmit=9 bytes_invalid=0 send_seq=285 receive_seq=285 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.1 sysload=0.21 cputime=141.794 memavail=638304 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=159.7 pwm=1.000
Stats 3485.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3091 bytes_read=17130 bytes_retransmit=9 bytes_invalid=0 send_seq=286 receive_seq=286 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002696  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.2 sysload=0.21 cputime=141.822 memavail=638080 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=160.9 pwm=1.000
Stats 3486.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3113 bytes_read=17312 bytes_retransmit=9 bytes_invalid=0 send_seq=288 receive_seq=288 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002695  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.4 sysload=0.21 cputime=141.856 memavail=639608 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=162.6 pwm=1.000
Stats 3487.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3119 bytes_read=17474 bytes_retransmit=9 bytes_invalid=0 send_seq=289 receive_seq=289 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.3 sysload=0.20 cputime=141.883 memavail=640348 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=163.9 pwm=1.000
Stats 3488.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3125 bytes_read=17637 bytes_retransmit=9 bytes_invalid=0 send_seq=290 receive_seq=290 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002697  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=31.1 sysload=0.20 cputime=141.910 memavail=640780 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=165.0 pwm=1.000
Stats 3489.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3131 bytes_read=17814 bytes_retransmit=9 bytes_invalid=0 send_seq=291 receive_seq=291 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.3 sysload=0.20 cputime=141.934 memavail=639380 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=166.7 pwm=1.000
Stats 3490.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3153 bytes_read=17967 bytes_retransmit=9 bytes_invalid=0 send_seq=293 receive_seq=293 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=29.2 sysload=0.20 cputime=141.962 memavail=638680 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=167.9 pwm=1.000
Stats 3491.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000017 mcu_task_stddev=0.000011 bytes_write=3159 bytes_read=18130 bytes_retransmit=9 bytes_invalid=0 send_seq=294 receive_seq=294 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002699  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=26.9 sysload=0.20 cputime=141.990 memavail=638456 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=169.0 pwm=1.000
Stats 3492.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3165 bytes_read=18321 bytes_retransmit=9 bytes_invalid=0 send_seq=295 receive_seq=295 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002700  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=30.5 sysload=0.18 cputime=142.019 memavail=637784 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=170.7 pwm=1.000
Stats 3493.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3171 bytes_read=18469 bytes_retransmit=9 bytes_invalid=0 send_seq=296 receive_seq=296 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=28.5 sysload=0.18 cputime=142.046 memavail=640728 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=171.7 pwm=1.000
Stats 3494.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3193 bytes_read=18637 bytes_retransmit=9 bytes_invalid=0 send_seq=298 receive_seq=298 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002702  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.18 cputime=142.068 memavail=640216 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=173.0 pwm=1.000
Stats 3495.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3205 bytes_read=18830 bytes_retransmit=9 bytes_invalid=0 send_seq=300 receive_seq=300 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=27.9 sysload=0.18 cputime=142.096 memavail=639992 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=174.5 pwm=1.000
Stats 3496.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3211 bytes_read=18978 bytes_retransmit=9 bytes_invalid=0 send_seq=301 receive_seq=301 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002703  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.5 sysload=0.18 cputime=142.124 memavail=639320 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=175.8 pwm=1.000
Stats 3497.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3217 bytes_read=19155 bytes_retransmit=9 bytes_invalid=0 send_seq=302 receive_seq=302 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.16 cputime=142.154 memavail=639096 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=176.8 pwm=1.000
Stats 3498.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3239 bytes_read=19337 bytes_retransmit=9 bytes_invalid=0 send_seq=304 receive_seq=304 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=28.2 sysload=0.16 cputime=142.183 memavail=640936 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=178.2 pwm=1.000
Stats 3499.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3245 bytes_read=19485 bytes_retransmit=9 bytes_invalid=0 send_seq=305 receive_seq=305 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.6 sysload=0.16 cputime=142.214 memavail=640932 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=179.4 pwm=1.000
Stats 3500.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3251 bytes_read=19663 bytes_retransmit=9 bytes_invalid=0 send_seq=306 receive_seq=306 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=142.246 memavail=639256 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=180.4 pwm=1.000
Stats 3501.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3257 bytes_read=19825 bytes_retransmit=9 bytes_invalid=0 send_seq=307 receive_seq=307 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.16 cputime=142.275 memavail=639032 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=182.0 pwm=1.000
Stats 3502.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3274 bytes_read=19987 bytes_retransmit=9 bytes_invalid=0 send_seq=308 receive_seq=308 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.9 sysload=0.15 cputime=142.301 memavail=638584 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=182.9 pwm=1.000
Stats 3503.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3280 bytes_read=20165 bytes_retransmit=9 bytes_invalid=0 send_seq=309 receive_seq=309 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.15 cputime=142.325 memavail=640520 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=184.1 pwm=1.000
Stats 3504.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3286 bytes_read=20327 bytes_retransmit=9 bytes_invalid=0 send_seq=310 receive_seq=310 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.9 sysload=0.15 cputime=142.347 memavail=639436 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=185.6 pwm=1.000
Stats 3505.3: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3292 bytes_read=20475 bytes_retransmit=9 bytes_invalid=0 send_seq=311 receive_seq=311 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=32.8 sysload=0.15 cputime=142.373 memavail=639844 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=186.7 pwm=1.000
Stats 3506.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3298 bytes_read=20653 bytes_retransmit=9 bytes_invalid=0 send_seq=312 receive_seq=312 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=28.4 sysload=0.15 cputime=142.400 memavail=639116 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=187.8 pwm=1.000
Stats 3507.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3320 bytes_read=20834 bytes_retransmit=9 bytes_invalid=0 send_seq=314 receive_seq=314 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=31.3 sysload=0.14 cputime=142.427 memavail=637884 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=189.0 pwm=1.000
Stats 3508.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3326 bytes_read=20982 bytes_retransmit=9 bytes_invalid=0 send_seq=315 receive_seq=315 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.14 cputime=142.450 memavail=640640 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=190.4 pwm=1.000
Stats 3509.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3332 bytes_read=21160 bytes_retransmit=9 bytes_invalid=0 send_seq=316 receive_seq=316 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.7 sysload=0.14 cputime=142.472 memavail=639968 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=191.3 pwm=1.000
Stats 3510.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3338 bytes_read=21322 bytes_retransmit=9 bytes_invalid=0 send_seq=317 receive_seq=317 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.14 cputime=142.499 memavail=639716 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=192.7 pwm=1.000
Stats 3511.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3360 bytes_read=21475 bytes_retransmit=9 bytes_invalid=0 send_seq=319 receive_seq=319 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.6 sysload=0.14 cputime=142.527 memavail=639044 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=193.8 pwm=1.000
Stats 3512.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3366 bytes_read=21667 bytes_retransmit=9 bytes_invalid=0 send_seq=320 receive_seq=320 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.7 sysload=0.13 cputime=142.554 memavail=638820 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=194.7 pwm=1.000
Stats 3513.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3388 bytes_read=21834 bytes_retransmit=9 bytes_invalid=0 send_seq=322 receive_seq=322 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=31.0 sysload=0.13 cputime=142.580 memavail=640632 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=196.1 pwm=0.939
Stats 3514.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3426 bytes_read=21992 bytes_retransmit=9 bytes_invalid=0 send_seq=325 receive_seq=325 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.4 sysload=0.13 cputime=142.601 memavail=638732 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=196.9 pwm=0.963
Stats 3515.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3464 bytes_read=22180 bytes_retransmit=9 bytes_invalid=0 send_seq=328 receive_seq=328 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=30.5 sysload=0.13 cputime=142.628 memavail=640244 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=197.9 pwm=0.935
Stats 3516.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000011 bytes_write=3486 bytes_read=22347 bytes_retransmit=9 bytes_invalid=0 send_seq=330 receive_seq=330 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=30.4 sysload=0.13 cputime=142.656 memavail=640020 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=199.2 pwm=0.822
Stats 3517.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3540 bytes_read=22524 bytes_retransmit=9 bytes_invalid=0 send_seq=334 receive_seq=334 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=55.3 heater_bed: target=0 temp=19.8 pwm=0.000 mcu_temp: temp=30.4 sysload=0.12 cputime=142.683 memavail=639320 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=200.1 pwm=0.831
Stats 3518.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3578 bytes_read=22712 bytes_retransmit=9 bytes_invalid=0 send_seq=337 receive_seq=337 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.12 cputime=142.709 memavail=640792 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=201.0 pwm=0.794
Stats 3519.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3632 bytes_read=22889 bytes_retransmit=9 bytes_invalid=0 send_seq=341 receive_seq=341 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=142.732 memavail=640524 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.2 pwm=0.693
Stats 3520.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3670 bytes_read=23047 bytes_retransmit=9 bytes_invalid=0 send_seq=344 receive_seq=344 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=31.8 sysload=0.12 cputime=142.758 memavail=639824 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=202.8 pwm=0.730
Stats 3521.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3708 bytes_read=23235 bytes_retransmit=9 bytes_invalid=0 send_seq=347 receive_seq=347 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.4 sysload=0.12 cputime=142.787 memavail=640080 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=203.6 pwm=0.709
Stats 3522.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3746 bytes_read=23407 bytes_retransmit=9 bytes_invalid=0 send_seq=350 receive_seq=350 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=26.9 sysload=0.19 cputime=142.813 memavail=639604 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=204.5 pwm=0.675
Stats 3523.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3768 bytes_read=23574 bytes_retransmit=9 bytes_invalid=0 send_seq=352 receive_seq=352 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.4 sysload=0.19 cputime=142.836 memavail=640720 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.0 pwm=0.726
Heater extruder within range of 210.000
Stats 3524.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3806 bytes_read=23762 bytes_retransmit=9 bytes_invalid=0 send_seq=355 receive_seq=355 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.3 pwm=0.000 mcu_temp: temp=31.1 sysload=0.19 cputime=142.864 memavail=639272 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=205.5 pwm=0.705
Stats 3525.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3876 bytes_read=23944 bytes_retransmit=9 bytes_invalid=0 send_seq=360 receive_seq=360 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=28.7 sysload=0.19 cputime=142.895 memavail=639020 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.2 pwm=0.638
Stats 3526.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=3898 bytes_read=24097 bytes_retransmit=9 bytes_invalid=0 send_seq=362 receive_seq=362 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002725  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.19 cputime=142.923 memavail=639020 print_time=11.530 buffer_time=0.000 print_stall=0 extruder: target=210 temp=206.5 pwm=0.714
Stats 3527.4: gcodein=0  mcu: mcu_awake=0.002 mcu_task_avg=0.000018 mcu_task_stddev=0.000010 bytes_write=4806 bytes_read=24669 bytes_retransmit=9 bytes_invalid=0 send_seq=393 receive_seq=393 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=312 freq=72002723  raspberry_pi: temp=54.8 heater_bed: target=0 temp=23.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.17 cputime=143.031 memavail=639020 print_time=165.734 buffer_time=49.416 print_stall=0 extruder: target=210 temp=206.8 pwm=0.758
Stats 3528.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=4899 bytes_read=24902 bytes_retransmit=9 bytes_invalid=0 send_seq=398 receive_seq=398 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=296 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.5 sysload=0.17 cputime=143.063 memavail=640960 print_time=165.734 buffer_time=48.416 print_stall=0 extruder: target=210 temp=207.5 pwm=0.637
Stats 3529.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=4965 bytes_read=25099 bytes_retransmit=9 bytes_invalid=0 send_seq=402 receive_seq=402 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=280 freq=72002718  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.5 sysload=0.17 cputime=143.090 memavail=639928 print_time=165.734 buffer_time=47.415 print_stall=0 extruder: target=210 temp=208.0 pwm=0.561
Stats 3530.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=5058 bytes_read=25321 bytes_retransmit=9 bytes_invalid=0 send_seq=407 receive_seq=407 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=264 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.17 cputime=143.125 memavail=639892 print_time=165.734 buffer_time=46.414 print_stall=0 extruder: target=210 temp=208.1 pwm=0.690
Stats 3531.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=5140 bytes_read=25528 bytes_retransmit=9 bytes_invalid=0 send_seq=412 receive_seq=412 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=248 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=26.0 sysload=0.17 cputime=143.159 memavail=639668 print_time=165.734 buffer_time=45.413 print_stall=0 extruder: target=210 temp=208.3 pwm=0.672
Stats 3532.4: gcodein=0  mcu: mcu_awake=0.004 mcu_task_avg=0.000023 mcu_task_stddev=0.000015 bytes_write=5222 bytes_read=25722 bytes_retransmit=9 bytes_invalid=0 send_seq=417 receive_seq=417 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=232 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=31.2 sysload=0.16 cputime=143.194 memavail=638296 print_time=165.734 buffer_time=44.412 print_stall=0 extruder: target=210 temp=208.6 pwm=0.585
Stats 3533.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5320 bytes_read=25968 bytes_retransmit=9 bytes_invalid=0 send_seq=423 receive_seq=423 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=216 freq=72002725  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=29.8 sysload=0.16 cputime=143.230 memavail=639816 print_time=165.734 buffer_time=43.411 print_stall=0 extruder: target=210 temp=208.9 pwm=0.517
Stats 3534.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5418 bytes_read=26191 bytes_retransmit=9 bytes_invalid=0 send_seq=429 receive_seq=429 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=200 freq=72002722  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.1 sysload=0.16 cputime=143.258 memavail=636944 print_time=165.734 buffer_time=42.411 print_stall=0 extruder: target=210 temp=208.7 pwm=0.843
Stats 3535.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5500 bytes_read=26395 bytes_retransmit=9 bytes_invalid=0 send_seq=434 receive_seq=434 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=184 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.7 sysload=0.16 cputime=143.293 memavail=638872 print_time=165.734 buffer_time=41.410 print_stall=0 extruder: target=210 temp=209.2 pwm=0.607
Stats 3536.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5598 bytes_read=26634 bytes_retransmit=9 bytes_invalid=0 send_seq=440 receive_seq=440 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=168 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.16 cputime=143.330 memavail=638424 print_time=165.734 buffer_time=40.410 print_stall=0 extruder: target=210 temp=209.2 pwm=0.607
Stats 3537.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=5680 bytes_read=26852 bytes_retransmit=9 bytes_invalid=0 send_seq=445 receive_seq=445 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=152 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.0 sysload=0.15 cputime=143.365 memavail=638200 print_time=165.734 buffer_time=39.410 print_stall=0 extruder: target=210 temp=209.2 pwm=0.675
Stats 3538.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5754 bytes_read=27070 bytes_retransmit=9 bytes_invalid=0 send_seq=450 receive_seq=450 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=136 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.9 sysload=0.15 cputime=143.397 memavail=640680 print_time=165.734 buffer_time=38.409 print_stall=0 extruder: target=210 temp=209.3 pwm=0.705
Stats 3539.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5860 bytes_read=27309 bytes_retransmit=9 bytes_invalid=0 send_seq=456 receive_seq=456 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=120 freq=72002719  raspberry_pi: temp=56.4 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.15 cputime=143.426 memavail=637880 print_time=165.734 buffer_time=37.408 print_stall=0 extruder: target=210 temp=209.3 pwm=0.756
Stats 3540.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=5913 bytes_read=27517 bytes_retransmit=9 bytes_invalid=0 send_seq=459 receive_seq=459 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=104 freq=72002719  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.15 cputime=143.459 memavail=640632 print_time=165.734 buffer_time=36.407 print_stall=0 extruder: target=210 temp=209.6 pwm=0.648
Stats 3541.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6003 bytes_read=27721 bytes_retransmit=9 bytes_invalid=0 send_seq=464 receive_seq=464 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=88 freq=72002720  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.7 sysload=0.15 cputime=143.493 memavail=639680 print_time=165.734 buffer_time=35.407 print_stall=0 extruder: target=210 temp=209.6 pwm=0.673
Stats 3542.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6069 bytes_read=27950 bytes_retransmit=9 bytes_invalid=0 send_seq=468 receive_seq=468 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=72 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.6 sysload=0.13 cputime=143.530 memavail=639456 print_time=165.734 buffer_time=34.406 print_stall=0 extruder: target=210 temp=209.5 pwm=0.813
Stats 3543.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6162 bytes_read=28182 bytes_retransmit=9 bytes_invalid=0 send_seq=473 receive_seq=473 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=56 freq=72002721  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.13 cputime=143.564 memavail=640848 print_time=165.734 buffer_time=33.406 print_stall=0 extruder: target=210 temp=209.8 pwm=0.685
Stats 3544.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6236 bytes_read=28386 bytes_retransmit=9 bytes_invalid=0 send_seq=478 receive_seq=478 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=8 upcoming_bytes=40 freq=72002719  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.8 sysload=0.13 cputime=143.590 memavail=638436 print_time=165.734 buffer_time=32.405 print_stall=0 extruder: target=210 temp=210.0 pwm=0.589
Stats 3545.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6342 bytes_read=28625 bytes_retransmit=9 bytes_invalid=0 send_seq=484 receive_seq=484 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=24 freq=72002719  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=29.4 sysload=0.13 cputime=143.627 memavail=638212 print_time=165.734 buffer_time=31.404 print_stall=0 extruder: target=210 temp=210.1 pwm=0.589
Stats 3546.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6440 bytes_read=28848 bytes_retransmit=9 bytes_invalid=0 send_seq=490 receive_seq=490 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=8 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.13 cputime=143.662 memavail=637772 print_time=165.734 buffer_time=30.403 print_stall=0 extruder: target=210 temp=210.0 pwm=0.669
Stats 3547.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6482 bytes_read=29042 bytes_retransmit=9 bytes_invalid=0 send_seq=493 receive_seq=493 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=29.9 sysload=0.12 cputime=143.694 memavail=637772 print_time=165.734 buffer_time=29.403 print_stall=0 extruder: target=210 temp=210.0 pwm=0.669
Stats 3548.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6559 bytes_read=29290 bytes_retransmit=9 bytes_invalid=0 send_seq=498 receive_seq=498 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.4 sysload=0.12 cputime=143.726 memavail=640372 print_time=165.734 buffer_time=28.403 print_stall=0 extruder: target=210 temp=210.3 pwm=0.562
Stats 3549.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6657 bytes_read=29518 bytes_retransmit=9 bytes_invalid=0 send_seq=505 receive_seq=505 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.8 sysload=0.12 cputime=143.753 memavail=640004 print_time=165.734 buffer_time=27.402 print_stall=0 extruder: target=210 temp=210.2 pwm=0.683
Stats 3550.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6723 bytes_read=29722 bytes_retransmit=9 bytes_invalid=0 send_seq=510 receive_seq=510 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.12 cputime=143.786 memavail=639080 print_time=165.734 buffer_time=26.400 print_stall=0 extruder: target=210 temp=210.5 pwm=0.499
Stats 3551.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6805 bytes_read=29961 bytes_retransmit=9 bytes_invalid=0 send_seq=516 receive_seq=516 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.0 sysload=0.12 cputime=143.819 memavail=638604 print_time=165.734 buffer_time=25.400 print_stall=0 extruder: target=210 temp=210.4 pwm=0.559
Stats 3552.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000011 bytes_write=6903 bytes_read=30189 bytes_retransmit=9 bytes_invalid=0 send_seq=523 receive_seq=523 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=27.0 sysload=0.11 cputime=143.855 memavail=638156 print_time=165.734 buffer_time=24.400 print_stall=0 extruder: target=210 temp=210.3 pwm=0.611
Stats 3553.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=6969 bytes_read=30407 bytes_retransmit=9 bytes_invalid=0 send_seq=528 receive_seq=528 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.6 sysload=0.11 cputime=143.885 memavail=640844 print_time=165.734 buffer_time=23.399 print_stall=0 extruder: target=210 temp=210.6 pwm=0.504
Stats 3554.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7051 bytes_read=30646 bytes_retransmit=9 bytes_invalid=0 send_seq=534 receive_seq=534 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.1 sysload=0.11 cputime=143.914 memavail=637996 print_time=165.734 buffer_time=22.398 print_stall=0 extruder: target=210 temp=210.3 pwm=0.658
Stats 3555.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7117 bytes_read=30864 bytes_retransmit=9 bytes_invalid=0 send_seq=539 receive_seq=539 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=30.1 sysload=0.11 cputime=143.947 memavail=637548 print_time=165.734 buffer_time=21.398 print_stall=0 extruder: target=210 temp=210.2 pwm=0.713
Stats 3556.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7205 bytes_read=31073 bytes_retransmit=9 bytes_invalid=0 send_seq=546 receive_seq=545 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=29.0 sysload=0.11 cputime=143.982 memavail=637324 print_time=165.734 buffer_time=20.397 print_stall=0 extruder: target=210 temp=210.2 pwm=0.669
Stats 3557.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7271 bytes_read=31323 bytes_retransmit=9 bytes_invalid=0 send_seq=551 receive_seq=551 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=55.3 heater_bed: target=0 temp=23.4 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=144.017 memavail=636876 print_time=165.734 buffer_time=19.397 print_stall=0 extruder: target=210 temp=210.3 pwm=0.608
Stats 3558.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7321 bytes_read=31550 bytes_retransmit=9 bytes_invalid=0 send_seq=555 receive_seq=555 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.18 cputime=144.048 memavail=640720 print_time=165.734 buffer_time=18.396 print_stall=0 extruder: target=210 temp=210.2 pwm=0.663
Stats 3559.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7371 bytes_read=31749 bytes_retransmit=9 bytes_invalid=0 send_seq=559 receive_seq=559 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=28.7 sysload=0.18 cputime=144.074 memavail=640936 print_time=165.734 buffer_time=17.395 print_stall=0 extruder: target=210 temp=210.4 pwm=0.553
Stats 3560.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7437 bytes_read=31997 bytes_retransmit=9 bytes_invalid=0 send_seq=564 receive_seq=564 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002728  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=31.3 sysload=0.18 cputime=144.113 memavail=640012 print_time=165.734 buffer_time=16.394 print_stall=0 extruder: target=210 temp=210.3 pwm=0.619
Stats 3561.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7514 bytes_read=32201 bytes_retransmit=9 bytes_invalid=0 send_seq=569 receive_seq=569 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.18 cputime=144.148 memavail=639788 print_time=165.734 buffer_time=15.394 print_stall=0 extruder: target=210 temp=210.2 pwm=0.696
Stats 3562.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=7548 bytes_read=32395 bytes_retransmit=9 bytes_invalid=0 send_seq=572 receive_seq=572 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002731  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=32.4 sysload=0.25 cputime=144.181 memavail=640552 print_time=165.734 buffer_time=14.393 print_stall=0 extruder: target=210 temp=210.2 pwm=0.696
Stats 3563.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7630 bytes_read=32662 bytes_retransmit=9 bytes_invalid=0 send_seq=578 receive_seq=578 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.25 cputime=144.214 memavail=640256 print_time=165.734 buffer_time=13.392 print_stall=0 extruder: target=210 temp=209.9 pwm=0.850
Stats 3564.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7728 bytes_read=32876 bytes_retransmit=9 bytes_invalid=0 send_seq=585 receive_seq=585 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002727  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.0 sysload=0.25 cputime=144.242 memavail=640092 print_time=165.734 buffer_time=12.391 print_stall=0 extruder: target=210 temp=210.3 pwm=0.606
Stats 3565.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7810 bytes_read=33085 bytes_retransmit=9 bytes_invalid=0 send_seq=591 receive_seq=591 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=29.1 sysload=0.25 cputime=144.276 memavail=640564 print_time=165.734 buffer_time=11.391 print_stall=0 extruder: target=210 temp=210.1 pwm=0.724
Stats 3566.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7876 bytes_read=33333 bytes_retransmit=9 bytes_invalid=0 send_seq=596 receive_seq=596 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=30.8 sysload=0.25 cputime=144.310 memavail=640312 print_time=165.734 buffer_time=10.389 print_stall=0 extruder: target=210 temp=210.1 pwm=0.702
Stats 3567.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=7958 bytes_read=33542 bytes_retransmit=9 bytes_invalid=0 send_seq=602 receive_seq=602 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.6 sysload=0.31 cputime=144.343 memavail=641644 print_time=165.734 buffer_time=9.388 print_stall=0 extruder: target=210 temp=210.2 pwm=0.748
Stats 3568.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8008 bytes_read=33755 bytes_retransmit=9 bytes_invalid=0 send_seq=606 receive_seq=606 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.8 sysload=0.31 cputime=144.376 memavail=641128 print_time=165.734 buffer_time=8.388 print_stall=0 extruder: target=210 temp=210.4 pwm=0.628
Stats 3569.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8058 bytes_read=33998 bytes_retransmit=9 bytes_invalid=0 send_seq=610 receive_seq=610 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.31 cputime=144.406 memavail=640652 print_time=165.734 buffer_time=7.387 print_stall=0 extruder: target=210 temp=210.2 pwm=0.702
Stats 3570.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8140 bytes_read=34207 bytes_retransmit=9 bytes_invalid=0 send_seq=616 receive_seq=616 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.3 sysload=0.31 cputime=144.439 memavail=640176 print_time=165.734 buffer_time=6.386 print_stall=0 extruder: target=210 temp=210.2 pwm=0.665
Stats 3571.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8206 bytes_read=34411 bytes_retransmit=9 bytes_invalid=0 send_seq=621 receive_seq=621 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=55.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=27.2 sysload=0.31 cputime=144.474 memavail=639504 print_time=165.734 buffer_time=5.385 print_stall=0 extruder: target=210 temp=210.3 pwm=0.584
Stats 3572.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8267 bytes_read=34654 bytes_retransmit=9 bytes_invalid=0 send_seq=625 receive_seq=625 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=27.7 sysload=0.37 cputime=144.515 memavail=639056 print_time=165.734 buffer_time=4.385 print_stall=0 extruder: target=210 temp=209.9 pwm=0.743
Stats 3573.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8365 bytes_read=34882 bytes_retransmit=9 bytes_invalid=0 send_seq=632 receive_seq=632 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.37 cputime=144.551 memavail=640732 print_time=165.734 buffer_time=3.385 print_stall=0 extruder: target=210 temp=210.0 pwm=0.741
Stats 3574.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8431 bytes_read=35086 bytes_retransmit=9 bytes_invalid=0 send_seq=637 receive_seq=637 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.7 sysload=0.37 cputime=144.592 memavail=637704 print_time=165.734 buffer_time=2.384 print_stall=0 extruder: target=210 temp=210.1 pwm=0.756
Stats 3575.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8481 bytes_read=35329 bytes_retransmit=9 bytes_invalid=0 send_seq=641 receive_seq=641 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.9 sysload=0.37 cputime=144.630 memavail=637256 print_time=165.734 buffer_time=1.383 print_stall=0 extruder: target=210 temp=210.2 pwm=0.675
Stats 3576.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8547 bytes_read=35533 bytes_retransmit=9 bytes_invalid=0 send_seq=646 receive_seq=646 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=31.0 sysload=0.37 cputime=144.666 memavail=636780 print_time=165.734 buffer_time=0.382 print_stall=0 extruder: target=210 temp=210.0 pwm=0.709
Stats 3577.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=8649 bytes_read=35747 bytes_retransmit=9 bytes_invalid=0 send_seq=653 receive_seq=653 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002729  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.0 sysload=0.42 cputime=144.701 memavail=636332 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.550
Stats 3578.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8715 bytes_read=36009 bytes_retransmit=9 bytes_invalid=0 send_seq=658 receive_seq=658 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002734  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.42 cputime=144.732 memavail=640580 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.625
Stats 3579.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8765 bytes_read=36208 bytes_retransmit=9 bytes_invalid=0 send_seq=662 receive_seq=662 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002735  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.6 sysload=0.42 cputime=144.767 memavail=639720 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.760
Stats 3580.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8847 bytes_read=36432 bytes_retransmit=9 bytes_invalid=0 send_seq=668 receive_seq=668 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.9 sysload=0.42 cputime=144.805 memavail=639940 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.565
Stats 3581.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8913 bytes_read=36665 bytes_retransmit=9 bytes_invalid=0 send_seq=673 receive_seq=673 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=31.3 sysload=0.42 cputime=144.842 memavail=638276 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.582
Stats 3582.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=8963 bytes_read=36864 bytes_retransmit=9 bytes_invalid=0 send_seq=677 receive_seq=677 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002736  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.38 cputime=144.875 memavail=639736 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.830
Stats 3583.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9045 bytes_read=37102 bytes_retransmit=9 bytes_invalid=0 send_seq=683 receive_seq=683 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002742  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=26.8 sysload=0.38 cputime=144.905 memavail=639976 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.717
Stats 3584.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9111 bytes_read=37335 bytes_retransmit=9 bytes_invalid=0 send_seq=688 receive_seq=688 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002739  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.38 cputime=144.930 memavail=637276 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.632
Stats 3585.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9193 bytes_read=37544 bytes_retransmit=9 bytes_invalid=0 send_seq=694 receive_seq=694 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002738  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.5 sysload=0.38 cputime=144.964 memavail=637276 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.622
Stats 3586.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9259 bytes_read=37763 bytes_retransmit=9 bytes_invalid=0 send_seq=699 receive_seq=699 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002737  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.38 cputime=144.997 memavail=636604 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.644
Stats 3587.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9341 bytes_read=38001 bytes_retransmit=9 bytes_invalid=0 send_seq=705 receive_seq=705 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002733  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=28.7 sysload=0.35 cputime=145.031 memavail=636380 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.653
Stats 3588.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9423 bytes_read=38224 bytes_retransmit=9 bytes_invalid=0 send_seq=711 receive_seq=711 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002732  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.2 sysload=0.35 cputime=145.062 memavail=640772 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.661
Stats 3589.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9457 bytes_read=38426 bytes_retransmit=9 bytes_invalid=0 send_seq=714 receive_seq=714 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002730  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.9 sysload=0.35 cputime=145.086 memavail=640072 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.661
Stats 3590.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9539 bytes_read=38651 bytes_retransmit=9 bytes_invalid=0 send_seq=720 receive_seq=720 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002726  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.35 cputime=145.119 memavail=640736 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.508
Stats 3591.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9621 bytes_read=38850 bytes_retransmit=9 bytes_invalid=0 send_seq=726 receive_seq=726 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002724  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.9 sysload=0.35 cputime=145.150 memavail=640036 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.716
Stats 3592.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=9703 bytes_read=39063 bytes_retransmit=9 bytes_invalid=0 send_seq=732 receive_seq=732 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.4 sysload=0.32 cputime=145.182 memavail=639588 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.710
Stats 3593.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9780 bytes_read=39308 bytes_retransmit=9 bytes_invalid=0 send_seq=737 receive_seq=737 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.32 cputime=145.215 memavail=640772 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.526
Stats 3594.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9878 bytes_read=39522 bytes_retransmit=9 bytes_invalid=0 send_seq=744 receive_seq=744 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.0 sysload=0.32 cputime=145.242 memavail=638500 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.511
Stats 3595.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=9960 bytes_read=39746 bytes_retransmit=9 bytes_invalid=0 send_seq=750 receive_seq=750 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.1 sysload=0.32 cputime=145.275 memavail=638500 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.753
Stats 3596.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10021 bytes_read=39974 bytes_retransmit=9 bytes_invalid=0 send_seq=754 receive_seq=754 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002720  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.32 cputime=145.309 memavail=640488 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.712
Stats 3597.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10103 bytes_read=40183 bytes_retransmit=9 bytes_invalid=0 send_seq=760 receive_seq=760 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.30 cputime=145.342 memavail=639760 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.620
Stats 3598.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10137 bytes_read=40406 bytes_retransmit=9 bytes_invalid=0 send_seq=763 receive_seq=763 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.1 sysload=0.30 cputime=145.373 memavail=640876 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.620
Stats 3599.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10187 bytes_read=40634 bytes_retransmit=9 bytes_invalid=0 send_seq=767 receive_seq=767 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.2 sysload=0.30 cputime=145.401 memavail=640136 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.524
Stats 3600.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10264 bytes_read=40838 bytes_retransmit=9 bytes_invalid=0 send_seq=772 receive_seq=772 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.8 sysload=0.30 cputime=145.437 memavail=640624 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.541
Stats 3601.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10346 bytes_read=41062 bytes_retransmit=9 bytes_invalid=0 send_seq=778 receive_seq=778 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.1 sysload=0.30 cputime=145.474 memavail=640148 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.551
Stats 3602.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=10423 bytes_read=41295 bytes_retransmit=9 bytes_invalid=0 send_seq=783 receive_seq=783 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=25.9 sysload=0.27 cputime=145.511 memavail=639168 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.673
Stats 3603.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10521 bytes_read=41523 bytes_retransmit=9 bytes_invalid=0 send_seq=790 receive_seq=790 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.6 sysload=0.27 cputime=145.542 memavail=640916 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.513
Stats 3604.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10571 bytes_read=41737 bytes_retransmit=9 bytes_invalid=0 send_seq=794 receive_seq=794 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=56.4 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=25.7 sysload=0.27 cputime=145.567 memavail=640620 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.662
Stats 3605.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10648 bytes_read=41970 bytes_retransmit=9 bytes_invalid=0 send_seq=799 receive_seq=799 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.27 cputime=145.599 memavail=640172 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.757
Stats 3606.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10714 bytes_read=42174 bytes_retransmit=9 bytes_invalid=0 send_seq=804 receive_seq=804 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.3 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.7 sysload=0.27 cputime=145.630 memavail=639472 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.567
Stats 3607.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10748 bytes_read=42383 bytes_retransmit=9 bytes_invalid=0 send_seq=807 receive_seq=807 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=32.2 sysload=0.25 cputime=145.664 memavail=638772 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.567
Stats 3608.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10809 bytes_read=42625 bytes_retransmit=9 bytes_invalid=0 send_seq=811 receive_seq=811 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.8 sysload=0.25 cputime=145.695 memavail=640996 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.633
Stats 3609.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10891 bytes_read=42834 bytes_retransmit=9 bytes_invalid=0 send_seq=817 receive_seq=817 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.25 cputime=145.721 memavail=640068 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.631
Stats 3610.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=10957 bytes_read=43053 bytes_retransmit=9 bytes_invalid=0 send_seq=822 receive_seq=822 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002705  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.5 sysload=0.25 cputime=145.755 memavail=639368 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.624
Stats 3611.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11007 bytes_read=43281 bytes_retransmit=9 bytes_invalid=0 send_seq=826 receive_seq=826 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.25 cputime=145.789 memavail=638920 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.554
Stats 3612.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11073 bytes_read=43485 bytes_retransmit=9 bytes_invalid=0 send_seq=831 receive_seq=831 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=29.8 sysload=0.23 cputime=145.822 memavail=638696 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.502
Stats 3613.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11155 bytes_read=43723 bytes_retransmit=9 bytes_invalid=0 send_seq=837 receive_seq=837 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.4 sysload=0.23 cputime=145.857 memavail=640372 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.789
Stats 3614.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11216 bytes_read=43951 bytes_retransmit=9 bytes_invalid=0 send_seq=841 receive_seq=841 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.5 sysload=0.23 cputime=145.884 memavail=637960 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.669
Stats 3615.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11282 bytes_read=44155 bytes_retransmit=9 bytes_invalid=0 send_seq=846 receive_seq=846 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.23 cputime=145.919 memavail=637960 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.422
Stats 3616.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11364 bytes_read=44379 bytes_retransmit=9 bytes_invalid=0 send_seq=852 receive_seq=852 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=27.2 sysload=0.23 cputime=145.953 memavail=639732 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.549
Stats 3617.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11458 bytes_read=44628 bytes_retransmit=9 bytes_invalid=0 send_seq=858 receive_seq=858 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=27.6 sysload=0.21 cputime=145.991 memavail=639508 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.773
Stats 3618.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11540 bytes_read=44851 bytes_retransmit=9 bytes_invalid=0 send_seq=864 receive_seq=864 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.6 sysload=0.21 cputime=146.026 memavail=640768 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.685
Stats 3619.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11606 bytes_read=45070 bytes_retransmit=9 bytes_invalid=0 send_seq=869 receive_seq=869 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.8 sysload=0.21 cputime=146.055 memavail=640068 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.470
Stats 3620.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11672 bytes_read=45303 bytes_retransmit=9 bytes_invalid=0 send_seq=874 receive_seq=874 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=28.9 sysload=0.21 cputime=146.093 memavail=640700 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.479
Stats 3621.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11738 bytes_read=45507 bytes_retransmit=9 bytes_invalid=0 send_seq=879 receive_seq=879 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.6 pwm=0.000 mcu_temp: temp=32.2 sysload=0.21 cputime=146.132 memavail=639972 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.635
Stats 3622.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=11788 bytes_read=45721 bytes_retransmit=9 bytes_invalid=0 send_seq=883 receive_seq=883 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.20 cputime=146.168 memavail=639524 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.810
Stats 3623.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11870 bytes_read=45968 bytes_retransmit=9 bytes_invalid=0 send_seq=889 receive_seq=888 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=55.3 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=30.2 sysload=0.20 cputime=146.202 memavail=640684 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.445
Stats 3624.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11931 bytes_read=46172 bytes_retransmit=9 bytes_invalid=0 send_seq=893 receive_seq=893 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=55.8 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.3 sysload=0.20 cputime=146.231 memavail=640836 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.645
Stats 3625.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=11997 bytes_read=46391 bytes_retransmit=9 bytes_invalid=0 send_seq=898 receive_seq=898 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.20 cputime=146.268 memavail=640136 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.683
Stats 3626.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12074 bytes_read=46619 bytes_retransmit=9 bytes_invalid=0 send_seq=903 receive_seq=902 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=28.9 sysload=0.20 cputime=146.305 memavail=640340 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.483
Stats 3627.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12140 bytes_read=46828 bytes_retransmit=9 bytes_invalid=0 send_seq=908 receive_seq=908 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.26 cputime=146.341 memavail=641056 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.546
Stats 3628.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12190 bytes_read=47056 bytes_retransmit=9 bytes_invalid=0 send_seq=912 receive_seq=912 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=30.3 sysload=0.26 cputime=146.376 memavail=637592 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.730
Stats 3629.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12267 bytes_read=47289 bytes_retransmit=9 bytes_invalid=0 send_seq=917 receive_seq=917 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=28.6 sysload=0.26 cputime=146.409 memavail=637116 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.575
Stats 3630.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12333 bytes_read=47493 bytes_retransmit=9 bytes_invalid=0 send_seq=922 receive_seq=922 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.2 sysload=0.26 cputime=146.442 memavail=636892 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.633
Stats 3631.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12378 bytes_read=47702 bytes_retransmit=9 bytes_invalid=0 send_seq=925 receive_seq=925 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=28.4 sysload=0.26 cputime=146.476 memavail=636444 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.685
Stats 3632.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12439 bytes_read=47930 bytes_retransmit=9 bytes_invalid=0 send_seq=929 receive_seq=929 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.4 sysload=0.24 cputime=146.511 memavail=636444 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.625
Stats 3633.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12505 bytes_read=48148 bytes_retransmit=9 bytes_invalid=0 send_seq=934 receive_seq=934 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=30.1 sysload=0.24 cputime=146.544 memavail=636220 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.545
Stats 3634.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12571 bytes_read=48367 bytes_retransmit=9 bytes_invalid=0 send_seq=939 receive_seq=939 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.8 pwm=0.000 mcu_temp: temp=29.8 sysload=0.24 cputime=146.578 memavail=633784 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.510
Stats 3635.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12653 bytes_read=48605 bytes_retransmit=9 bytes_invalid=0 send_seq=945 receive_seq=945 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=28.7 sysload=0.24 cputime=146.611 memavail=633336 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.631
Stats 3636.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12687 bytes_read=48799 bytes_retransmit=9 bytes_invalid=0 send_seq=948 receive_seq=948 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=27.1 sysload=0.24 cputime=146.643 memavail=633112 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.631
Stats 3637.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=12721 bytes_read=49008 bytes_retransmit=9 bytes_invalid=0 send_seq=951 receive_seq=951 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.6 sysload=0.22 cputime=146.679 memavail=632888 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.631
Stats 3638.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12809 bytes_read=49255 bytes_retransmit=9 bytes_invalid=0 send_seq=956 receive_seq=956 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=28.2 sysload=0.22 cputime=146.712 memavail=632888 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.602
Stats 3639.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12875 bytes_read=49459 bytes_retransmit=9 bytes_invalid=0 send_seq=961 receive_seq=961 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=31.3 sysload=0.22 cputime=146.744 memavail=632664 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.634
Stats 3640.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=12941 bytes_read=49693 bytes_retransmit=9 bytes_invalid=0 send_seq=966 receive_seq=966 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.4 sysload=0.22 cputime=146.781 memavail=632216 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.739
Stats 3641.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13007 bytes_read=49911 bytes_retransmit=9 bytes_invalid=0 send_seq=971 receive_seq=971 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=30.0 sysload=0.22 cputime=146.816 memavail=632248 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.635
Stats 3642.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13073 bytes_read=50115 bytes_retransmit=9 bytes_invalid=0 send_seq=976 receive_seq=976 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.8 sysload=0.20 cputime=146.848 memavail=632024 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.742
Stats 3643.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13123 bytes_read=50358 bytes_retransmit=9 bytes_invalid=0 send_seq=980 receive_seq=980 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.2 pwm=0.000 mcu_temp: temp=29.2 sysload=0.20 cputime=146.882 memavail=636988 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.572
Stats 3644.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13184 bytes_read=50571 bytes_retransmit=9 bytes_invalid=0 send_seq=984 receive_seq=984 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=54.8 heater_bed: target=0 temp=19.7 pwm=0.000 mcu_temp: temp=31.0 sysload=0.20 cputime=146.916 memavail=635784 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.572
Stats 3645.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13250 bytes_read=50775 bytes_retransmit=9 bytes_invalid=0 send_seq=989 receive_seq=989 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.3 sysload=0.20 cputime=146.950 memavail=635116 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.626
Stats 3646.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13284 bytes_read=50999 bytes_retransmit=9 bytes_invalid=0 send_seq=992 receive_seq=992 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=29.8 sysload=0.20 cputime=146.981 memavail=634892 print_time=165.734 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.626
Stats 3647.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=13735 bytes_read=51247 bytes_retransmit=9 bytes_invalid=0 send_seq=1003 receive_seq=1003 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=28.3 sysload=0.18 cputime=147.046 memavail=634640 print_time=256.513 buffer_time=20.109 print_stall=0 extruder: target=210 temp=209.7 pwm=0.765
Stats 3648.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=13785 bytes_read=51461 bytes_retransmit=9 bytes_invalid=0 send_seq=1007 receive_seq=1007 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.1 sysload=0.18 cputime=147.080 memavail=634416 print_time=256.513 buffer_time=19.109 print_stall=0 extruder: target=210 temp=210.3 pwm=0.531
Stats 3649.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=13867 bytes_read=51688 bytes_retransmit=9 bytes_invalid=0 send_seq=1013 receive_seq=1013 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.1 sysload=0.18 cputime=147.115 memavail=633968 print_time=256.513 buffer_time=18.108 print_stall=0 extruder: target=210 temp=210.1 pwm=0.647
Stats 3650.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=13944 bytes_read=51895 bytes_retransmit=9 bytes_invalid=0 send_seq=1018 receive_seq=1018 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=29.8 sysload=0.18 cputime=147.151 memavail=633244 print_time=256.513 buffer_time=17.108 print_stall=0 extruder: target=210 temp=210.0 pwm=0.667
Stats 3651.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=14010 bytes_read=52089 bytes_retransmit=9 bytes_invalid=0 send_seq=1023 receive_seq=1023 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.4 pwm=0.000 mcu_temp: temp=29.9 sysload=0.18 cputime=147.184 memavail=633244 print_time=256.513 buffer_time=16.107 print_stall=0 extruder: target=210 temp=209.7 pwm=0.808
Stats 3652.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000022 mcu_task_stddev=0.000015 bytes_write=14055 bytes_read=52304 bytes_retransmit=9 bytes_invalid=0 send_seq=1026 receive_seq=1026 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=27.9 sysload=0.17 cputime=147.219 memavail=632796 print_time=256.513 buffer_time=15.106 print_stall=0 extruder: target=210 temp=209.7 pwm=0.657
Stats 3653.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14132 bytes_read=52536 bytes_retransmit=9 bytes_invalid=0 send_seq=1031 receive_seq=1031 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.6 sysload=0.17 cputime=147.255 memavail=632572 print_time=256.513 buffer_time=14.105 print_stall=0 extruder: target=210 temp=209.3 pwm=0.880
Stats 3654.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14214 bytes_read=52745 bytes_retransmit=9 bytes_invalid=0 send_seq=1037 receive_seq=1037 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=30.8 sysload=0.17 cputime=147.291 memavail=631632 print_time=256.513 buffer_time=13.104 print_stall=0 extruder: target=210 temp=209.4 pwm=0.783
Stats 3655.4: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14296 bytes_read=52984 bytes_retransmit=9 bytes_invalid=0 send_seq=1043 receive_seq=1043 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.6 sysload=0.17 cputime=147.329 memavail=631696 print_time=256.513 buffer_time=12.103 print_stall=0 extruder: target=210 temp=209.5 pwm=0.631
Stats 3656.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14362 bytes_read=53202 bytes_retransmit=9 bytes_invalid=0 send_seq=1048 receive_seq=1048 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.8 heater_bed: target=0 temp=22.7 pwm=0.000 mcu_temp: temp=29.2 sysload=0.17 cputime=147.365 memavail=631728 print_time=256.513 buffer_time=11.102 print_stall=0 extruder: target=210 temp=209.1 pwm=0.756
Stats 3657.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14412 bytes_read=53401 bytes_retransmit=9 bytes_invalid=0 send_seq=1052 receive_seq=1052 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.5 sysload=0.16 cputime=147.399 memavail=636256 print_time=256.513 buffer_time=10.101 print_stall=0 extruder: target=210 temp=208.8 pwm=0.835
Stats 3658.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14494 bytes_read=53654 bytes_retransmit=9 bytes_invalid=0 send_seq=1058 receive_seq=1058 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.5 sysload=0.16 cputime=147.436 memavail=635556 print_time=256.513 buffer_time=9.101 print_stall=0 extruder: target=210 temp=208.7 pwm=0.821
Stats 3659.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14576 bytes_read=53877 bytes_retransmit=9 bytes_invalid=0 send_seq=1064 receive_seq=1064 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=23.2 pwm=0.000 mcu_temp: temp=30.2 sysload=0.16 cputime=147.472 memavail=630052 print_time=256.513 buffer_time=8.100 print_stall=0 extruder: target=210 temp=208.9 pwm=0.748
Stats 3660.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14642 bytes_read=54081 bytes_retransmit=9 bytes_invalid=0 send_seq=1069 receive_seq=1069 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=55.3 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=27.5 sysload=0.16 cputime=147.499 memavail=635036 print_time=256.513 buffer_time=7.099 print_stall=0 extruder: target=210 temp=208.5 pwm=0.856
Stats 3661.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14724 bytes_read=54320 bytes_retransmit=9 bytes_invalid=0 send_seq=1075 receive_seq=1075 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.8 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.16 cputime=147.536 memavail=635036 print_time=256.513 buffer_time=6.098 print_stall=0 extruder: target=210 temp=208.8 pwm=0.733
Stats 3662.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14806 bytes_read=54543 bytes_retransmit=9 bytes_invalid=0 send_seq=1081 receive_seq=1081 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.2 pwm=0.000 mcu_temp: temp=29.3 sysload=0.14 cputime=147.573 memavail=635036 print_time=256.513 buffer_time=5.098 print_stall=0 extruder: target=210 temp=208.9 pwm=0.712
Stats 3663.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14851 bytes_read=54751 bytes_retransmit=9 bytes_invalid=0 send_seq=1084 receive_seq=1084 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.9 sysload=0.14 cputime=147.611 memavail=634588 print_time=256.513 buffer_time=4.096 print_stall=0 extruder: target=210 temp=208.9 pwm=0.764
Stats 3664.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=14933 bytes_read=54990 bytes_retransmit=9 bytes_invalid=0 send_seq=1090 receive_seq=1090 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.14 cputime=147.646 memavail=634112 print_time=256.513 buffer_time=3.095 print_stall=0 extruder: target=210 temp=208.9 pwm=0.805
Stats 3665.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15015 bytes_read=55213 bytes_retransmit=9 bytes_invalid=0 send_seq=1096 receive_seq=1096 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.1 sysload=0.14 cputime=147.683 memavail=634112 print_time=256.513 buffer_time=2.095 print_stall=0 extruder: target=210 temp=209.2 pwm=0.698
Stats 3666.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15081 bytes_read=55417 bytes_retransmit=9 bytes_invalid=0 send_seq=1101 receive_seq=1101 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.5 pwm=0.000 mcu_temp: temp=30.3 sysload=0.14 cputime=147.718 memavail=633888 print_time=256.513 buffer_time=1.095 print_stall=0 extruder: target=210 temp=209.2 pwm=0.725
Stats 3667.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15183 bytes_read=55656 bytes_retransmit=9 bytes_invalid=0 send_seq=1107 receive_seq=1107 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=54.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=32.6 sysload=0.13 cputime=147.753 memavail=633664 print_time=256.513 buffer_time=0.094 print_stall=0 extruder: target=210 temp=209.1 pwm=0.800
Stats 3668.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15265 bytes_read=55893 bytes_retransmit=9 bytes_invalid=0 send_seq=1113 receive_seq=1113 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.7 pwm=0.000 mcu_temp: temp=30.2 sysload=0.13 cputime=147.789 memavail=633440 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.3 pwm=0.709
Stats 3669.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15331 bytes_read=56097 bytes_retransmit=9 bytes_invalid=0 send_seq=1118 receive_seq=1118 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=26.9 sysload=0.13 cputime=147.821 memavail=633216 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.500
Stats 3670.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15392 bytes_read=56326 bytes_retransmit=9 bytes_invalid=0 send_seq=1122 receive_seq=1122 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.2 sysload=0.13 cputime=147.856 memavail=632520 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.6 pwm=0.568
Stats 3671.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15474 bytes_read=56549 bytes_retransmit=9 bytes_invalid=0 send_seq=1128 receive_seq=1128 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.3 sysload=0.13 cputime=147.890 memavail=632296 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.653
Stats 3672.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15540 bytes_read=56753 bytes_retransmit=9 bytes_invalid=0 send_seq=1133 receive_seq=1133 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.8 sysload=0.12 cputime=147.921 memavail=632296 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.652
Stats 3673.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15606 bytes_read=57001 bytes_retransmit=9 bytes_invalid=0 send_seq=1138 receive_seq=1138 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.2 pwm=0.000 mcu_temp: temp=29.9 sysload=0.12 cputime=147.954 memavail=632072 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.485
Stats 3674.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15688 bytes_read=57224 bytes_retransmit=9 bytes_invalid=0 send_seq=1144 receive_seq=1144 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=54.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.9 sysload=0.12 cputime=147.988 memavail=631100 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.629
Stats 3675.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15738 bytes_read=57423 bytes_retransmit=9 bytes_invalid=0 send_seq=1148 receive_seq=1148 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=23.0 pwm=0.000 mcu_temp: temp=27.8 sysload=0.12 cputime=148.021 memavail=630652 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.573
Stats 3676.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15820 bytes_read=57662 bytes_retransmit=9 bytes_invalid=0 send_seq=1154 receive_seq=1154 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=29.1 sysload=0.12 cputime=148.057 memavail=630204 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.495
Stats 3677.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=15897 bytes_read=57880 bytes_retransmit=9 bytes_invalid=0 send_seq=1159 receive_seq=1159 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=28.3 sysload=0.11 cputime=148.092 memavail=629980 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.596
Stats 3678.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=15947 bytes_read=58093 bytes_retransmit=9 bytes_invalid=0 send_seq=1163 receive_seq=1163 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002706  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=28.1 sysload=0.11 cputime=148.124 memavail=629532 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.512
Stats 3679.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16035 bytes_read=58348 bytes_retransmit=9 bytes_invalid=0 send_seq=1170 receive_seq=1170 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002707  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.1 pwm=0.000 mcu_temp: temp=28.0 sysload=0.11 cputime=148.158 memavail=629820 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.7 pwm=0.682
Stats 3680.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16117 bytes_read=58571 bytes_retransmit=9 bytes_invalid=0 send_seq=1176 receive_seq=1176 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002704  raspberry_pi: temp=54.2 heater_bed: target=0 temp=21.4 pwm=0.000 mcu_temp: temp=28.2 sysload=0.11 cputime=148.191 memavail=629628 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=211.0 pwm=0.546
Stats 3681.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16167 bytes_read=58770 bytes_retransmit=9 bytes_invalid=0 send_seq=1180 receive_seq=1180 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=30.5 sysload=0.11 cputime=148.226 memavail=634132 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.9 pwm=0.627
Stats 3682.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16217 bytes_read=58999 bytes_retransmit=9 bytes_invalid=0 send_seq=1184 receive_seq=1184 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=29.2 sysload=0.10 cputime=148.261 memavail=633684 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.561
Stats 3683.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16267 bytes_read=59226 bytes_retransmit=9 bytes_invalid=0 send_seq=1188 receive_seq=1188 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=30.1 sysload=0.10 cputime=148.294 memavail=633236 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.8 pwm=0.617
Stats 3684.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16317 bytes_read=59425 bytes_retransmit=9 bytes_invalid=0 send_seq=1192 receive_seq=1192 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.8 pwm=0.000 mcu_temp: temp=29.9 sysload=0.10 cputime=148.326 memavail=631796 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.698
Stats 3685.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16383 bytes_read=59659 bytes_retransmit=9 bytes_invalid=0 send_seq=1197 receive_seq=1197 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=31.0 sysload=0.10 cputime=148.357 memavail=631572 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.689
Stats 3686.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16481 bytes_read=59887 bytes_retransmit=9 bytes_invalid=0 send_seq=1204 receive_seq=1204 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.0 sysload=0.10 cputime=148.390 memavail=631348 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.632
Stats 3687.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16563 bytes_read=60096 bytes_retransmit=9 bytes_invalid=0 send_seq=1210 receive_seq=1210 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.9 sysload=0.09 cputime=148.423 memavail=631124 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.561
Stats 3688.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16629 bytes_read=60358 bytes_retransmit=9 bytes_invalid=0 send_seq=1215 receive_seq=1215 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002717  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.8 sysload=0.09 cputime=148.457 memavail=630676 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.5 pwm=0.597
Stats 3689.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16711 bytes_read=60567 bytes_retransmit=9 bytes_invalid=0 send_seq=1221 receive_seq=1221 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=29.7 sysload=0.09 cputime=148.489 memavail=630228 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.530
Stats 3690.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16777 bytes_read=60771 bytes_retransmit=9 bytes_invalid=0 send_seq=1226 receive_seq=1226 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002723  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=29.8 sysload=0.09 cputime=148.522 memavail=629780 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.623
Stats 3691.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16843 bytes_read=61019 bytes_retransmit=9 bytes_invalid=0 send_seq=1231 receive_seq=1231 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.9 sysload=0.09 cputime=148.555 memavail=629332 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.647
Stats 3692.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16941 bytes_read=61233 bytes_retransmit=9 bytes_invalid=0 send_seq=1238 receive_seq=1238 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002721  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=29.1 sysload=0.09 cputime=148.590 memavail=629108 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.694
Stats 3693.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=16991 bytes_read=61461 bytes_retransmit=9 bytes_invalid=0 send_seq=1242 receive_seq=1242 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002719  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.1 pwm=0.000 mcu_temp: temp=27.2 sysload=0.09 cputime=148.623 memavail=629108 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.610
Stats 3694.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17057 bytes_read=61694 bytes_retransmit=9 bytes_invalid=0 send_seq=1247 receive_seq=1247 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=53.7 heater_bed: target=0 temp=19.1 pwm=0.000 mcu_temp: temp=29.9 sysload=0.09 cputime=148.658 memavail=628908 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.6 pwm=0.433
Stats 3695.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17139 bytes_read=61903 bytes_retransmit=9 bytes_invalid=0 send_seq=1253 receive_seq=1253 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.8 pwm=0.000 mcu_temp: temp=27.0 sysload=0.09 cputime=148.692 memavail=628908 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.619
Stats 3696.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17205 bytes_read=62122 bytes_retransmit=9 bytes_invalid=0 send_seq=1258 receive_seq=1258 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.0 sysload=0.09 cputime=148.725 memavail=628972 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.638
Stats 3697.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17266 bytes_read=62350 bytes_retransmit=9 bytes_invalid=0 send_seq=1262 receive_seq=1262 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.5 pwm=0.000 mcu_temp: temp=32.3 sysload=0.08 cputime=148.759 memavail=628780 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.623
Stats 3698.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17316 bytes_read=62563 bytes_retransmit=9 bytes_invalid=0 send_seq=1266 receive_seq=1266 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.7 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.2 sysload=0.08 cputime=148.793 memavail=628588 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.623
Stats 3699.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17366 bytes_read=62777 bytes_retransmit=9 bytes_invalid=0 send_seq=1270 receive_seq=1270 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.8 sysload=0.08 cputime=148.826 memavail=628620 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.4 pwm=0.572
Stats 3700.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17432 bytes_read=63010 bytes_retransmit=9 bytes_invalid=0 send_seq=1275 receive_seq=1275 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=11 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=27.6 sysload=0.08 cputime=148.861 memavail=628684 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.581
Stats 3701.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17514 bytes_read=63219 bytes_retransmit=9 bytes_invalid=0 send_seq=1281 receive_seq=1281 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.8 sysload=0.08 cputime=148.894 memavail=628752 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.3 pwm=0.576
Stats 3702.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17564 bytes_read=63433 bytes_retransmit=9 bytes_invalid=0 send_seq=1285 receive_seq=1285 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.0 pwm=0.000 mcu_temp: temp=27.5 sysload=0.07 cputime=148.927 memavail=633476 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.663
Stats 3703.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17662 bytes_read=63685 bytes_retransmit=9 bytes_invalid=0 send_seq=1292 receive_seq=1291 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.7 sysload=0.07 cputime=148.964 memavail=633028 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.657
Stats 3704.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17723 bytes_read=63889 bytes_retransmit=9 bytes_invalid=0 send_seq=1296 receive_seq=1296 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.07 cputime=148.996 memavail=631348 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.596
Stats 3705.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17789 bytes_read=64108 bytes_retransmit=9 bytes_invalid=0 send_seq=1301 receive_seq=1301 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=29.1 sysload=0.07 cputime=149.032 memavail=630900 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.622
Stats 3706.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17871 bytes_read=64346 bytes_retransmit=9 bytes_invalid=0 send_seq=1307 receive_seq=1307 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.1 pwm=0.000 mcu_temp: temp=30.3 sysload=0.07 cputime=149.067 memavail=630900 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.663
Stats 3707.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=17937 bytes_read=64550 bytes_retransmit=9 bytes_invalid=0 send_seq=1312 receive_seq=1312 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=53.2 heater_bed: target=0 temp=22.0 pwm=0.000 mcu_temp: temp=30.6 sysload=0.07 cputime=149.101 memavail=630676 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.701
Stats 3708.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18003 bytes_read=64779 bytes_retransmit=9 bytes_invalid=0 send_seq=1317 receive_seq=1317 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=29.1 sysload=0.07 cputime=149.133 memavail=630228 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.634
Stats 3709.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18069 bytes_read=65000 bytes_retransmit=9 bytes_invalid=0 send_seq=1322 receive_seq=1322 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002710  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.9 pwm=0.000 mcu_temp: temp=29.5 sysload=0.07 cputime=149.166 memavail=630004 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.695
Stats 3710.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18135 bytes_read=65194 bytes_retransmit=9 bytes_invalid=0 send_seq=1327 receive_seq=1327 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.2 sysload=0.07 cputime=149.196 memavail=629780 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.2 pwm=0.600
Stats 3711.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18185 bytes_read=65397 bytes_retransmit=9 bytes_invalid=0 send_seq=1331 receive_seq=1331 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002708  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.5 pwm=0.000 mcu_temp: temp=30.8 sysload=0.07 cputime=149.229 memavail=629332 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.661
Stats 3712.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18251 bytes_read=65626 bytes_retransmit=9 bytes_invalid=0 send_seq=1336 receive_seq=1336 retransmit_seq=2 srtt=0.004 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002715  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.5 sysload=0.06 cputime=149.263 memavail=628884 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.666
Stats 3713.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18285 bytes_read=65834 bytes_retransmit=9 bytes_invalid=0 send_seq=1339 receive_seq=1339 retransmit_seq=2 srtt=0.004 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=53.7 heater_bed: target=0 temp=21.7 pwm=0.000 mcu_temp: temp=30.5 sysload=0.06 cputime=149.294 memavail=628660 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.666
Stats 3714.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18367 bytes_read=66058 bytes_retransmit=9 bytes_invalid=0 send_seq=1345 receive_seq=1345 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002712  raspberry_pi: temp=53.7 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=25.8 sysload=0.06 cputime=149.327 memavail=628412 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.766
Stats 3715.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18449 bytes_read=66296 bytes_retransmit=9 bytes_invalid=0 send_seq=1351 receive_seq=1351 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=28.4 sysload=0.06 cputime=149.361 memavail=628412 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.609
Stats 3716.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18515 bytes_read=66500 bytes_retransmit=9 bytes_invalid=0 send_seq=1356 receive_seq=1356 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002722  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=28.0 sysload=0.06 cputime=149.393 memavail=628412 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.576
Stats 3717.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000019 mcu_task_stddev=0.000010 bytes_write=18597 bytes_read=66724 bytes_retransmit=9 bytes_invalid=0 send_seq=1362 receive_seq=1362 retransmit_seq=2 srtt=0.003 rttvar=0.001 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002718  raspberry_pi: temp=53.2 heater_bed: target=0 temp=20.9 pwm=0.000 mcu_temp: temp=30.7 sysload=0.06 cputime=149.427 memavail=628412 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.8 pwm=0.757
Stats 3718.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18690 bytes_read=66976 bytes_retransmit=9 bytes_invalid=0 send_seq=1368 receive_seq=1368 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002716  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.6 pwm=0.000 mcu_temp: temp=26.5 sysload=0.06 cputime=149.462 memavail=628412 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.7 pwm=0.783
Stats 3719.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18756 bytes_read=67180 bytes_retransmit=9 bytes_invalid=0 send_seq=1373 receive_seq=1373 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002714  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.0 pwm=0.000 mcu_temp: temp=31.1 sysload=0.06 cputime=149.496 memavail=628440 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.540
Stats 3720.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18822 bytes_read=67414 bytes_retransmit=9 bytes_invalid=0 send_seq=1378 receive_seq=1378 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002713  raspberry_pi: temp=52.6 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.06 cputime=149.531 memavail=628440 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.1 pwm=0.541
Stats 3721.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18915 bytes_read=67637 bytes_retransmit=9 bytes_invalid=0 send_seq=1384 receive_seq=1384 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002711  raspberry_pi: temp=52.6 heater_bed: target=0 temp=20.3 pwm=0.000 mcu_temp: temp=26.6 sysload=0.06 cputime=149.565 memavail=628440 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=209.9 pwm=0.741
Stats 3722.5: gcodein=0  mcu: mcu_awake=0.003 mcu_task_avg=0.000020 mcu_task_stddev=0.000010 bytes_write=18981 bytes_read=67841 bytes_retransmit=9 bytes_invalid=0 send_seq=1389 receive_seq=1389 retransmit_seq=2 srtt=0.003 rttvar=0.000 rto=0.025 ready_bytes=0 upcoming_bytes=0 freq=72002709  raspberry_pi: temp=53.2 heater_bed: target=0 temp=21.3 pwm=0.000 mcu_temp: temp=30.1 sysload=0.05 cputime=149.598 memavail=628440 print_time=256.513 buffer_time=0.000 print_stall=0 extruder: target=210 temp=210.0 pwm=0.568