pi@raspberrypi:~ $ sudo dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.21-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP Mon Apr 3 17:20:52 BST 2023 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x1ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] percpu: Embedded 17 pages/cpu s36884 r8192 d24556 u69632 [ 0.000000] pcpu-alloc: s36884 r8192 d24556 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=969d3889-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 680924K/970752K available (10240K kernel code, 1452K rwdata, 2900K rodata, 1024K init, 613K bss, 27684K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 34800 entries in 103 pages [ 0.000000] ftrace: allocated 102 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000018] Switching to timer-based delay loop, resolution 52ns [ 0.000383] Console: colour dummy device 80x30 [ 0.000459] printk: console [tty1] enabled [ 0.000509] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000532] pid_max: default: 32768 minimum: 301 [ 0.000679] LSM: Security Framework initializing [ 0.000883] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000906] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002059] cgroup: Disabling memory control group subsystem [ 0.002301] CPU: Testing write buffer coherency: ok [ 0.002722] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003573] cblist_init_generic: Setting adjustable number of callback queues. [ 0.003589] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003701] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003845] Setting up static identity map for 0x100000 - 0x10003c [ 0.003983] rcu: Hierarchical SRCU implementation. [ 0.003992] rcu: Max phase no-delay instances is 1000. [ 0.004705] smp: Bringing up secondary CPUs ... [ 0.005622] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006576] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007450] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007554] smp: Brought up 1 node, 4 CPUs [ 0.007576] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007590] CPU: All CPU(s) started in HYP mode. [ 0.007597] CPU: Virtualization extensions available. [ 0.008340] devtmpfs: initialized [ 0.023552] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.023756] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.023785] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.033932] pinctrl core: initialized pinctrl subsystem [ 0.035111] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.038414] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.043476] audit: initializing netlink subsys (disabled) [ 0.043711] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.044328] thermal_sys: Registered thermal governor 'step_wise' [ 0.045405] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.045422] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.045664] Serial: AMBA PL011 UART driver [ 0.051427] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.070073] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start [ 0.080087] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54 [ 0.122799] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.127566] bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.129235] SCSI subsystem initialized [ 0.129474] usbcore: registered new interface driver usbfs [ 0.129539] usbcore: registered new interface driver hub [ 0.129592] usbcore: registered new device driver usb [ 0.129809] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.129975] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.130234] pps_core: LinuxPPS API ver. 1 registered [ 0.130245] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.130273] PTP clock support registered [ 2.008859] clocksource: Switched to clocksource arch_sys_counter [ 2.106665] VFS: Disk quotas dquot_6.6.0 [ 2.106763] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.106918] FS-Cache: Loaded [ 2.107211] CacheFiles: Loaded [ 2.115700] NET: Registered PF_INET protocol family [ 2.115986] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.118488] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.118525] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.118550] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.118726] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.119093] TCP: Hash tables configured (established 8192 bind 8192) [ 2.119232] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.119287] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.119505] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.120006] RPC: Registered named UNIX socket transport module. [ 2.120018] RPC: Registered udp transport module. [ 2.120027] RPC: Registered tcp transport module. [ 2.120035] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.121816] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 2.124903] Initialise system trusted keyrings [ 2.125143] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 2.134358] zbud: loaded [ 2.136712] NFS: Registering the id_resolver key type [ 2.136753] Key type id_resolver registered [ 2.136763] Key type id_legacy registered [ 2.136905] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.136917] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.138189] Key type asymmetric registered [ 2.138202] Asymmetric key parser 'x509' registered [ 2.138377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.138391] io scheduler mq-deadline registered [ 2.138405] io scheduler kyber registered [ 2.144092] simple-framebuffer 3eaa9000.framebuffer: framebuffer at 0x3eaa9000, 0x151800 bytes [ 2.144123] simple-framebuffer 3eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880 [ 2.144593] Console: switching to colour frame buffer device 90x30 [ 2.148880] simple-framebuffer 3eaa9000.framebuffer: fb0: simplefb registered! [ 2.153486] bcm2835-rng 3f104000.rng: hwrng registered [ 2.153855] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.154650] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 2.165659] brd: module loaded [ 2.172990] loop: module loaded [ 2.173588] Loading iSCSI transport class v2.0-870. [ 2.175030] usbcore: registered new interface driver lan78xx [ 2.175098] usbcore: registered new interface driver smsc95xx [ 2.175118] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.903204] Core Release: 2.80a [ 2.903220] Setting default values for core params [ 2.903246] Finished setting default values for core params [ 3.103503] Using Buffer DMA mode [ 3.103512] Periodic Transfer Interrupt Enhancement - disabled [ 3.103521] Multiprocessor Interrupt Enhancement - disabled [ 3.103529] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.103567] Dedicated Tx FIFOs mode [ 3.104126] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = 9ed04000 dma = 0xded04000 len=9024 [ 3.104164] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 3.104179] dwc_otg: Microframe scheduler enabled [ 3.104289] WARN::hcd_init_fiq:457: FIQ on core 1 [ 3.104306] WARN::hcd_init_fiq:458: FIQ ASM at 807c4360 length 36 [ 3.104326] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 3.104349] dwc_otg 3f980000.usb: DWC OTG Controller [ 3.104382] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.104422] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 3.104475] Init: Port Power? op_state=1 [ 3.104483] Init: Power Port (0) [ 3.104712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.104731] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.104746] usb usb1: Product: DWC OTG Controller [ 3.104759] usb usb1: Manufacturer: Linux 6.1.21-v7+ dwc_otg_hcd [ 3.104771] usb usb1: SerialNumber: 3f980000.usb [ 3.105390] hub 1-0:1.0: USB hub found [ 3.105438] hub 1-0:1.0: 1 port detected [ 3.106063] dwc_otg: FIQ enabled [ 3.106073] dwc_otg: NAK holdoff enabled [ 3.106081] dwc_otg: FIQ split-transaction FSM enabled [ 3.106096] Module dwc_common_port init [ 3.106390] usbcore: registered new interface driver usb-storage [ 3.106622] mousedev: PS/2 mouse device common for all mice [ 3.109206] sdhci: Secure Digital Host Controller Interface driver [ 3.109218] sdhci: Copyright(c) Pierre Ossman [ 3.109490] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.111384] ledtrig-cpu: registered to indicate activity on CPUs [ 3.111733] hid: raw HID events driver (C) Jiri Kosina [ 3.111876] usbcore: registered new interface driver usbhid [ 3.111888] usbhid: USB HID core driver [ 3.115969] Initializing XFRM netlink socket [ 3.116027] NET: Registered PF_PACKET protocol family [ 3.116121] Key type dns_resolver registered [ 3.117049] Registering SWP/SWPB emulation handler [ 3.117722] registered taskstats version 1 [ 3.117775] Loading compiled-in X.509 certificates [ 3.118574] Key type .fscrypt registered [ 3.118586] Key type fscrypt-provisioning registered [ 3.130122] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.130278] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.132308] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.132582] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.133837] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.133854] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.160252] sdhost: log_buf @ 7b8b623a (ded07000) [ 3.210070] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.212385] of_cfs_init [ 3.212584] of_cfs_init: OK [ 3.213628] Waiting for root device PARTUUID=969d3889-02... [ 3.228984] Indeed it is in host mode hprt0 = 00021501 [ 3.272495] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.277109] mmc0: new high speed SDHC card at address aaaa [ 3.277950] mmcblk0: mmc0:aaaa SD32G 29.7 GiB [ 3.280846] mmcblk0: p1 p2 [ 3.281495] mmcblk0: mmc0:aaaa SD32G 29.7 GiB (quirks 0x00004000) [ 3.298284] mmc1: new high speed SDIO card at address 0001 [ 3.327983] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.328076] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.329130] devtmpfs: mounted [ 3.335062] Freeing unused kernel image (initmem) memory: 1024K [ 3.349360] Run /sbin/init as init process [ 3.349371] with arguments: [ 3.349378] /sbin/init [ 3.349385] splash [ 3.349400] with environment: [ 3.349406] HOME=/ [ 3.349414] TERM=linux [ 3.438893] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.439064] Indeed it is in host mode hprt0 = 00001101 [ 3.679195] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.679232] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.679929] hub 1-1:1.0: USB hub found [ 3.680024] hub 1-1:1.0: 5 ports detected [ 3.840249] systemd[1]: System time before build time, advancing clock. [ 3.998928] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.074982] NET: Registered PF_INET6 protocol family [ 4.076406] Segment Routing with IPv6 [ 4.076447] In-situ OAM (IOAM) with IPv6 [ 4.129607] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.129727] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.134546] smsc95xx v2.0.0 [ 4.164740] systemd[1]: systemd 247.3-7+rpi1+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 4.165976] systemd[1]: Detected architecture arm. [ 4.168310] systemd[1]: Set hostname to . [ 4.250752] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199) [ 4.251749] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f7:54:af [ 4.349102] usb 1-1.4: new full-speed USB device number 4 using dwc_otg [ 4.481928] usb 1-1.4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [ 4.481969] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.481984] usb 1-1.4: Product: USB Serial [ 5.068342] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 5.334954] systemd[1]: Queued start job for default target Graphical Interface. [ 5.372645] systemd[1]: Created slice system-getty.slice. [ 5.374299] systemd[1]: Created slice system-modprobe.slice. [ 5.375440] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 5.376262] systemd[1]: Created slice User and Session Slice. [ 5.376856] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.378108] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.379472] systemd[1]: Reached target Slices. [ 5.379814] systemd[1]: Reached target Swap. [ 5.381086] systemd[1]: Listening on Syslog Socket. [ 5.381831] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.382246] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.383509] systemd[1]: Listening on Journal Audit Socket. [ 5.384252] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.385144] systemd[1]: Listening on Journal Socket. [ 5.389450] systemd[1]: Listening on udev Control Socket. [ 5.390211] systemd[1]: Listening on udev Kernel Socket. [ 5.391463] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 5.396382] systemd[1]: Mounting POSIX Message Queue File System... [ 5.401860] systemd[1]: Mounting RPC Pipe File System... [ 5.408116] systemd[1]: Mounting Kernel Debug File System... [ 5.414758] systemd[1]: Mounting Kernel Trace File System... [ 5.415541] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 5.424941] systemd[1]: Starting Restore / save the current clock... [ 5.431744] systemd[1]: Starting Set the console keyboard layout... [ 5.438380] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 5.445270] systemd[1]: Starting Load Kernel Module configfs... [ 5.452716] systemd[1]: Starting Load Kernel Module drm... [ 5.460258] systemd[1]: Starting Load Kernel Module fuse... [ 5.472179] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 5.478532] systemd[1]: Starting File System Check on Root Device... [ 5.493304] systemd[1]: Starting Journal Service... [ 5.518419] systemd[1]: Starting Load Kernel Modules... [ 5.529099] systemd[1]: Starting Coldplug All udev Devices... [ 5.581770] systemd[1]: Mounted POSIX Message Queue File System. [ 5.582651] systemd[1]: Mounted RPC Pipe File System. [ 5.583466] systemd[1]: Mounted Kernel Debug File System. [ 5.584053] systemd[1]: Mounted Kernel Trace File System. [ 5.585597] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 5.590612] systemd[1]: Finished Restore / save the current clock. [ 5.593942] systemd[1]: modprobe@configfs.service: Succeeded. [ 5.595401] systemd[1]: Finished Load Kernel Module configfs. [ 5.606591] systemd[1]: Mounting Kernel Configuration File System... [ 5.614211] systemd[1]: Started File System Check Daemon to report status. [ 5.616643] fuse: init (API version 7.37) [ 5.621794] systemd[1]: modprobe@fuse.service: Succeeded. [ 5.623005] systemd[1]: Finished Load Kernel Module fuse. [ 5.633920] systemd[1]: Mounting FUSE Control File System... [ 5.655609] i2c_dev: i2c /dev entries driver [ 5.674665] systemd[1]: Finished Load Kernel Modules. [ 5.675839] systemd[1]: Mounted Kernel Configuration File System. [ 5.676729] systemd[1]: Mounted FUSE Control File System. [ 5.759877] systemd[1]: Starting Apply Kernel Variables... [ 5.809504] systemd[1]: modprobe@drm.service: Succeeded. [ 5.810732] systemd[1]: Finished Load Kernel Module drm. [ 5.853889] systemd[1]: Finished Apply Kernel Variables. [ 5.911022] systemd[1]: Finished File System Check on Root Device. [ 5.970009] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.970731] systemd[1]: Started Journal Service. [ 6.136340] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. [ 6.251398] systemd-journald[132]: Received client request to flush runtime journal. [ 6.256600] systemd-journald[132]: File /var/log/journal/bfe77382d9c9467f873ea2f2ce985fa1/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 7.676498] mc: Linux media interface: v0.10 [ 7.759252] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 7.761803] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.761836] [vc_sm_connected_init]: start [ 7.785935] [vc_sm_connected_init]: installed successfully [ 7.802400] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 7.825360] bcm2835_audio bcm2835_audio: card created with 8 channels [ 7.903902] videodev: Linux video capture interface: v2.00 [ 8.006442] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.107463] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.112655] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 8.114619] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 8.114666] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 8.117699] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 8.117786] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 8.121872] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 8.121936] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 8.128641] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 8.128714] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 8.133368] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 8.133425] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 8.194307] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.217774] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 8.218398] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 8.220546] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 8.221035] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 8.221079] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 8.221101] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 8.221119] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 8.221135] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 8.232013] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 8.232698] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 8.233105] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 8.233382] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 8.233411] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 8.233433] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 8.233450] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 8.233467] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 8.233791] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 8.764535] usbcore: registered new interface driver usbserial_generic [ 8.764620] usbserial: USB Serial support registered for generic [ 8.780510] usbcore: registered new interface driver ch341 [ 8.780899] usbserial: USB Serial support registered for ch341-uart [ 8.781159] ch341 1-1.4:1.0: ch341-uart converter detected [ 8.784188] usb 1-1.4: ch341-uart converter now attached to ttyUSB0 [ 8.916769] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 9.054857] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 9.102518] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 9.297146] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 9.311216] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 9.311891] usbcore: registered new interface driver brcmfmac [ 9.372713] Console: switching to colour dummy device 80x30 [ 9.407921] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.509102] Registered IR keymap rc-cec [ 9.509359] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0 [ 9.509620] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0 [ 9.532061] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.532651] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.533099] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.533511] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.533918] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.534263] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.561015] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.566437] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897 [ 9.569828] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes [ 10.519526] 8021q: 802.1Q VLAN Support v1.8 [ 10.597890] uart-pl011 3f201000.serial: no DMA platform data [ 10.823566] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 10.827269] smsc95xx 1-1.1:1.0 eth0: Link is Down [ 10.880150] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 11.665381] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 13.209136] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 17.024903] Bluetooth: Core ver 2.22 [ 17.025005] NET: Registered PF_BLUETOOTH protocol family [ 17.025011] Bluetooth: HCI device and connection manager initialized [ 17.025034] Bluetooth: HCI socket layer initialized [ 17.025044] Bluetooth: L2CAP socket layer initialized [ 17.025059] Bluetooth: SCO socket layer initialized [ 17.052917] Bluetooth: HCI UART driver ver 2.3 [ 17.052941] Bluetooth: HCI UART protocol H4 registered [ 17.053047] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 17.053179] Bluetooth: HCI UART protocol Broadcom registered [ 17.572305] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.572328] Bluetooth: BNEP filters: protocol multicast [ 17.572345] Bluetooth: BNEP socket layer initialized [ 17.586204] Bluetooth: MGMT ver 1.22 [ 17.606943] NET: Registered PF_ALG protocol family [ 17.660713] cryptd: max_cpu_qlen set to 1000 [ 18.899651] Bluetooth: RFCOMM TTY layer initialized [ 18.899693] Bluetooth: RFCOMM socket layer initialized [ 18.899713] Bluetooth: RFCOMM ver 1.11 [18905.915708] usb 1-1.4: USB disconnect, device number 4 [18905.916171] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [18905.916233] ch341 1-1.4:1.0: device disconnected [18969.697703] usb 1-1.4: new full-speed USB device number 5 using dwc_otg [18969.830713] usb 1-1.4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [18969.830735] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [18969.830743] usb 1-1.4: Product: USB Serial [18969.832872] ch341 1-1.4:1.0: ch341-uart converter detected [18969.835553] usb 1-1.4: ch341-uart converter now attached to ttyUSB0 [22708.541802] usb 1-1.4: USB disconnect, device number 5 [22708.542551] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [22708.542659] ch341 1-1.4:1.0: device disconnected [22725.985588] usb 1-1.4: new full-speed USB device number 6 using dwc_otg [22726.118620] usb 1-1.4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.64 [22726.118654] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [22726.118670] usb 1-1.4: Product: USB Serial [22726.122310] ch341 1-1.4:1.0: ch341-uart converter detected [22726.127955] usb 1-1.4: ch341-uart converter now attached to ttyUSB0