Basic Information: Printer Model: CreatBot Max R3D MCU / Printerboard: Unknown / CreatBot proprietary board (photos of the board can be provided) Host / SBC: Raspberry Pi running Klipper klippy.log: Attached Describe your issue: I recently acquired a CreatBot Max R3D and I am trying to get it wo…

[image] Dasac: CreatBot Max R3D Your klippy.log didn’t get attached. Please upload. Is your machine a S1 or a S3?

Thanks for the information. I will upload the klippy.log file. Regarding the printer model, I believe it is a CreateBot MAX R3D, but I am currently trying to identify the exact revision/version because I purchased the machine used and I don’t have the original documentation. The printer board app…

It seems there are 2 different companies using “CreateBot”

[image] Dasac: CreatBot Max R3D Is this your machine? https://www.createbot.net/handler/download.ashx?url=/UploadFiles/202109/79716499.pdf ** [image] **

Yes, I understand. I have two printers: a CreateBot Max R3D and a CreateBot Mini. The machines I have are the ones made by the original CreateBot manufacturer. Both of my printers use an ATmega2560 controller board. I can send you photos of the printers, controller boards, labels, and any other in…

Welcome Dasac, I would make a request for just one printer a time. You might rename the thread name to just “Help needed: Createbot MAX 3D Printer firmware / Klipper configuration” or “Help needed: Createbot MINI 3D Printer firmware / Klipper configuration” or start over (confusion). Products - Zh…

Is this any help? [image] Creatbot DX2 config Configs Here’s the klipper config for a Creatbot DX2 with motherboard v 9.1.1. This config works on a slightly modified DX2 The following is different from the stock standard printer 1.75mm single nozzle and a d…

No (maybe :wink:), My post was intended to define the printer we are talking about. Dasac posted pictures of two printers. Very confusing. First of all Dasac has to name/define (fotos, whatever) the printer he wants to go with, In my eyes you are talking about the wrong printer.

You are right, my previous posts were confusing because I showed pictures of more than one printer. To clarify: the printer I am working on now is the one shown in the attached photos. These are the boards I want to identify and configure. Please use these photos as the reference for the printer w…

This is my board, i need the pinout [IMG_2285] [IMG_2286]

Help needed: CreatBot Max R3D and CreatBot Mini firmware / Klipper configuration

General Discussion

cardoc August 11, 2026, 4:08pm 9

Is this any help?

Topic		Replies	Views
Creatbot ver 9.2.3 config Configs	4	511	April 14, 2025
Creatbot motherboard ver 9.2.3 config General Discussion	11	3944	April 30, 2024
Trying to create a config file from scratch General Discussion	11	391	January 17, 2025
Creatbot DX2 config Configs	1	411	April 1, 2025
Need help creating a config for a frankensteined ender3 General Discussion	10	2746	September 15, 2023

Help needed: CreatBot Max R3D and CreatBot Mini firmware / Klipper configuration

Related topics