Basic Information: Printer Model: Anet E12 MCU / Printerboard: Anet 1.0 board Host / SBC: NEC LS550 Laptop 6gb ram klippy.log | / klippy (1).zip (3.9 MB) I Trying to calibrate input shapers using TEST_RESONANCES but Klipper gives me an error I’ve tried solving the problem from past posts…

Problem solved, I wasn’t looking at the log carefully, I changed X, Y = thpos[:2] to X, Y = tpos[:2] and everything worked

Help with TEST_RESONANCES,

Sineos May 17, 2025, 6:19pm 3

Topic		Replies	Views
SHAPER_CALIBRATE internal error after update General Discussion	6	295	July 15, 2025
Klipper Testing resonances not working General Discussion	2	51	July 28, 2025
Internal error - shaper_calibrate General Discussion	4	221	January 21, 2025
Error TEST_RESONANCES General Discussion	2	953	December 15, 2023
Shaper_calibrate_x&y.png General Discussion	2	934	May 23, 2024