[request] Knowledgebase: Klippy's timing variables

[Maas]

I’ve written a bit in my post:

Moonraker websocket to klipper, changing the size of the buffer

For future reference; Was able to solve by going into the klipper firmware directly; Through ssh on the py, ~nano ~/klippy-env/bin/python ~/klipper/klippy/toolhead.py did the trick. In the file klipper/klippy/toolhead.py There are two main settings; BUFFER_TIME (high low and start) → this determines how much seconds of future g-code is allowed to enter the buffer. And the LOOKAHEAD_FLUSH_TIME G-code is loaded in small batches, the batch size determined by time (0.25s of gcode by default) ca…

If you need more info let me know, I do not know much more than the outcome of my code implementations.