Basic Information: Printer Model: Voron Trident MCU / Printerboard: BTT Octopus v1.1 klippy.log Describe your issue: I have been running my Voron Trident with minimal issues for quite a while, just recently was starting a longer print, and after a few hours I received MCU ‘mcu’ shutdown: move …

I have checked that out yes. My takeaway was that manifestation was a fluky error. I’m wondering if there is a definitive explanation for mine, as I’ll have a lot of longer prints coming down the pipe and want be as confident as possible in my machine.

Strange thing. Are you able to reproduce it like Piov666 MCU shutdown: move queue overflow - #12 by Piov666 ?

After replacing the octopus mainboard with a brand new board and updated firmware, using RPi 3B+, I am now getting an ‘MCU shutdown Timer Too Close’ error. I’ve never had anything like this happen before, could it be anything to do with my recent switch to PrusaSlicer from SuperSlicer? Updated log a…

Did you read Sineos knowledge base thread Timer too close ?

I did check that out, I am running a webcam, but have been since I built the printer, so I wouldn’t have expected that to become an issue. It’s possible I could be getting interference on the Pi-MCU cable, but again I’ve never had that issue until now, I’ll try rerouting that tonight. I’m wondering…

[image] At least MCU Bandwidth is pretty high. Does no necessarily mean it is an issue, since it is scaled to 250 kBaud and USB can go faster. System Load and other indicators seem fine.

Thanks for the input. Just an update, I ran another print successfully with only the following changes made: changed G-Code flavor from Klipper to Marlin (Legacy) and changed the travel_speed_z from its default value (my travel speed of 150 mm/s) to 20 mm/s to avoid overloading the leadscrew stepper…

Sudden Move Queue Overflow

General Discussion

hcet14 April 11, 2023, 9:39am 2

Did you read this one MCU shutdown: move queue overflow?

Gook luck, hcet14

Topic		Replies	Views
Getting "MCU 'mcu' shutdown: Move queue overflow" error mid print for a certain file? General Discussion	7	280	December 7, 2025
MCU 'mcu' shutdown: Move queue overflow General Discussion	8	724	January 2, 2025
MCU 'mcu' shutdown : move queue overflow General Discussion	8	762	September 11, 2024
MCU 'mcu' shutdown: Move queue overflow Nr.2 General Discussion	6	262	June 25, 2025
MCU shutdown: move queue overflow General Discussion	12	7153	January 22, 2023

Sudden Move Queue Overflow

Related topics