Printer Model: ender6 MCU / Printerboard: manta m4p klippy.log.zip (1.3 MB) config-20230803-153511.zip (4.0 KB) looking for some help or advice, i recently switched over to using just spread cycle on my tmc 2209 drivers and when doing resonance testing etc i get really high numbers and recom…

Honestly i have no idea how to get those graphs…is there an easy to follow instruction?

What instruction did you follow to get your strange values and no graphs? The standard instruction shows and tells you how to generate the graphs: https://www.klipper3d.org/Measuring_Resonances.html#measuring-the-resonances If in doubt on any topic carefully read through the Klipper documentation…

Hi brian, Yeah with my adxl readings i simple ran the resonance test through my klipper screen menu on input shaping, then it just automatically sets it in my printer.cfg as far as i have seen. The link you have in your reply i have read through those articles and for some reason i just cant get my…

The instruction is quite easy to follow, you just need to know what you have and when to use it. You mainly need Mainsail/Fluidd and a SSH connection to your RasPi CM4 or CB1 compute module. Lets call the first GUI and the last SBC (single board computer). The guide on the link above often says O…

[image] LifeOfBrian: @Sineos when has Octoprint been put in the guide? It looks reworked but if I recall correctly the OctoPrint stuff is relatively new?! For a long time, Octoprint was the only user interface for Klipper, and much of the documentation was written at that time. So, in fact, i…

thanks brian i will try this, i probably simply over thought on the process, i do use putty and i run a cb1 on the manta board so lets hope i do this right lol

so quick first off running the query command i got this back which has me puzzled as it is a core xy machine. accelerometer values (x, y, z): -2886.803174, 0.000000, 2911.162892

ok so i have followed all instructions everything is upto date and installed…when i run commands given by brian i get all the tests and recommended shaper etc, but i do not get a graph so obviously i have missed something?

[image] Drlevi: but i do not get a graph so obviously i have missed something? Umm, yes, probably reading the instructions? :man_shrugging: Login to your RPi / CM / Manta Linux via SSH with the user that is running Klipper In the Linux command shell run: rm /tmp/resonances_*.csv (deletes o…

Adxl345 readings seem reaaly high?

General Discussion

Sineos August 24, 2023, 9:42am 2

Please post the graphs of your resonance testing. Also see Interpreting the Input Shaper Graphs

Topic		Replies	Views
Input Shaper without effect?! General Discussion	23	5235	February 7, 2023
ADXL345 Connection Help! General Discussion	29	7215	January 1, 2024
Raspberry Pi Pico + ADXL345: Portable resonance measurement Configs	25	64027	February 25, 2024
Strange behavior of ADXL345 - in search for a reliable alternative General Discussion	11	297	October 28, 2025
MPU9250/6500 high noise on Debian 13 Trixie General Discussion	11	241	January 5, 2026

Adxl345 readings seem reaaly high?

Related topics