Basic Information: Printer Model: Ender 3 Original (2018) MCU / Printerboard: MKS min e3 v1.2 klipper Host / SBC Slicer: Orca Slicer klippy.log klippy.zip (1.1 MB) Hello, I need I just installed Klipper and have been messing around with it. I have been able to get BLtouch working and hav…

Hello @AJprints ! The [gcode_macro START_PRINT] expects parametesr sto set bed and extruder to. {% set BED_TEMP = params.BED_TEMP|default(60)|float %} {% set EXTRUDER_TEMP = params.EXTRUDER_TEMP|default(150)|float %} This does not happen: [grafik]

Hi EddyMI3D So then do I need to change my slicer’s start G-code to this? [image]

Yes and take care that they are one line, no line breaks.

The line break was the issue! Thank you so much. I still have a little problem. My nozzle is setting the temp to the slicer temp while doing the bed mesh leveling. How can I make it do the bed mesh level at nozzle temp 150 and then when it moves to start location, wait for first layer temp from s…

Thank you, I was able to use the slicer start code to make this semi-work. see my reply below for the issue I have now.

Hello i copied your custom gcode for orca because Im having the same issue with the nozzle and bed tempnot changing to slicer set temps when print starts. Even though i copied orca is telling me “machine_start_gcode Parsing error at line 2: Not a variable name BED_TEMP={bed_temperature_intial_layer…

Help With START_PRINT

General Discussion

Sineos June 29, 2024, 7:42pm 3

See Using START_PRINT and END_PRINT Macros

Topic		Replies	Views
All temeratures are 0 as soon as first layer starts / Slicer-Start Macro-Klipper interdependency General Discussion	7	242	May 25, 2024
PRINT_START heat nozzle and bed at once General Discussion	6	772	November 19, 2024
START_PRINT gCode issue after update to klipper v0.10 (advice needed) General Discussion	3	17065	April 15, 2024
Using START_PRINT and END_PRINT Macros Knowledge Base	0	26838	April 3, 2024
Klipper Documentation for Extruder Temp is out of date Features	5	1127	November 9, 2023

Help With START_PRINT

Related topics