Basic Information: Printer Model: Ender 3 V2 MCU / Printerboard: Motherboard 4.2.7 klippy.log <a name="p-21215-describe-your-issue-just-joined-and-tried-to-do-a-quick-search-on-my-issue-i-didnt-see-the-solution-i-upgraded-my-ender-3-v2-with-the-427-motherboard-a-sprite-extruder-cr-touch-and-sonic-pad-the-issue-im-having-is-with-the-firmware-i-spent-weeks-with-creality-trying-to-find-the-right-firmware-and-no-joy-i-decided-to-use-klipper-with-the-sonic-pad-basically-you-choose-what-printer-you-have-and-it-will-give-you-the-firmware-to-flash-the-printer-however-due-to-the-fact-i-did-the-upgrades-there-isnt-an-option-for-the-sprite-extruder-and-the-cr-touch-when-you-choose-auto-leveling-the-printer-still-thinks-the-regular-bowden-extruder-is-installed-and-a-cr-touch-is-mounted-auto-home-works-and-then-you-choose-auto-leveling-the-cr-touch-will-go-straight-off-the-the-print-bed-i-believe-the-bowden-extruder-with-the-cr-touch-is-mounted-on-its-side-but-with-the-sprite-extruder-its-more-of-a-diagonal-thus-moving-the-it-off-the-bed-im-not-sure-how-to-go-about-modifying-firmware-to-accommodate-the-new-upgrades-if-anyones-knows-i-would-appreciate-the-help-as-i-dont-have-any-knowledge-on-how-to-start-2" class="anchor" href="#p-21215-describe-your-issue-just-joined-and-tried-to-do-a-quick-search-on-my-issue-i-didnt-see-the-solution-i-upgraded-my-ender-3-v2-with-the-427-motherboard-a-sprite-extruder-cr-touch-and-sonic-pad-the-issue-im-having-is-with-the-firmware-i-spent-weeks-with-creality-trying-to-find-the-right-firmware-and-no-joy-i-decided-to-use-klipper-with-the-sonic-pad-basically-you-choose-what-printer-you-have-and-it-will-give-you-the-firmware-to-flash-the-printer-however-due-to-the-fact-i-did-the-upgrades-there-isnt-an-option-for-the-sprite-extruder-and-the-cr-touch-when-you-choose-auto-leveling-the-printer-still-thinks-the-regular-bowden-extruder-is-installed-and-a-cr-touch-is-mounted-auto-home-works-and-then-you-choose-auto-leveling-the-cr-touch-will-go-straight-off-the-the-print-bed-i-believe-the-bowden-extruder-with-the-cr-touch-is-mounted-on-its-side-but-with-the-sprite-extruder-its-more-of-a-diagonal-thus-moving-the-it-off-the-bed-im-not-sure-how-to-go-about-modifying-firmware-to-accommodate-the-new-upgrades-if-anyones-knows-i-would-appreciate-the-help-as-i-dont-have-any-knowledge-on-how-to-start-2" aria-label="Heading link"> Describe your issue: Just joined and tried to do a quick search on my issue. I didn’t see the solution. I upgraded my Ender 3 V2 with the 4.2.7 motherboard, a sprite extruder, CR touch, and Sonic Pad.…

[image] Creality Sonic Pad and Alternatives Knowledge Base Creality Sonic Pad exclamation Update Since July 11, 2023, Creality seems to have released a firmware with a newer Klipper version. Again, they have not released the sources for this and the other co…

I found complete configs for the official klipper. I’d install that on it and load that config. Or just load your default config from creality if you can. This way you’ll be able to get more support as creality doesn’t have very good support in my experience.

Use the probe offsets to tell the printer the new location in the ,cfg file its cartesian based on the nozzle so right is positive and back is positive numbers so since its left and towards you it may be -40 X and -20 Y as an example . I have an sprite on a E5 Pro and fought the same issue as it tr…

Hello @L3D_help_guide ! Also with the Sonic Pad?

How to fix CR touch with Sprite extruder on Ender 3 v2

General Discussion

Sineos March 26, 2023, 9:06am 2

Topic		Replies	Views
Ender 3 pro 4.2.2 with sonic pad General Discussion	7	800	February 7, 2024
Sonic pad sprite extruder problems General Discussion	1	413	June 4, 2024
Ender 3 V1 w/ sprite pro extruder kit General Discussion	1	299	June 19, 2024
Sonic Pad to Ender 3v2 with Sprite Pro and CR Touch General Discussion	24	20123	July 28, 2024
Extruder not recognized after upgrade and replace General Discussion	1	207	November 7, 2023

How to fix CR touch with Sprite extruder on Ender 3 v2

Related topics