I can't install klipper

[Psayk]

Basic Information:

Printer Model:Ender 3 s1
MCU / Printerboard: f401
Host / SBC
klippy.log: klippy (3).log.txt (239.5 KB)

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

…

I can’t install a klipper on my Ender 3 S1 printer. I don’t know where I’m making a mistake, but I get this error every time.

klippy (3).log.txt (239.5 KB)

[EddyMI3D]

Hello @Psayk !

Please upload the klippy.log file here.

Please not another file server.

[TheFuzzyGiggler]

No such file or directory: '/dev/serial/by-id/usb-1a86_USB_Serial-if00-port0'

You’re going to need to SSH into your Pi and run

ls /dev/serial/by-id/*
or
ls /dev/serial/by-path/*

When your printer is powered on and connected to your printer board via USB.
As of right now it’s not detecting it.