Basic Information:
Printer Model: Creality CR10s Pro V2
MCU / Printerboard: CrealityStock, Trigorilla, Nano 328p
Host / SBC - Raspberry Pi
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
I have a small OLED 0.9 inch generic i2c connected to arduino nano as a separate mcu for monitoring spool storage - I have it showing humidity and temp currently but the text is way too small to be of long term use. I already had these around doing nothing and thought be cool to get the nano to manage all the spool box tasks BTT filament motion / switch, humidity monitoring maybe NFC (i haven’t even started figuring that one out yet) so still running that off the pi with nfc2klipper. i tried hacking the font file font8x14.py altering the binary value in there from some other project - didnt do any good. i tried looking in the zip file quoted as source for that binary data. I dont really know what i’m doing with these font files so any help / insight would help.
klippy.zip (189.7 KB)