Basic Information: Printer Model: Self designed Delta MCU / Printerboard: Duet Wifi klippy.log Describe your issue: Hi, this is directly related to: Lose Connection with Duet 2 WiFi after flashing · Issue #4933 · Klipper3d/klipper · GitHub As I can’t open an issue on Github about this, I’ll …

There is a known, weird interaction between Bullseye and this board. A developer with this board and the needed knowledge would have to debug this. This has not happened as of yet. Currently your only solution is to not using Bullseye.

Yep, I saw that you closed the issue back then, but no further investigation has been initiated. Since the Klipper github issues section seesm only to be allowed for whitelisted users, I hope that Kevin will read this. Maybe he has an idea or at least know the right direction to go as this will pos…

Issue is already reported in Discourse here: [image] Duet 2 firmware compilation broken on Debian 11 General Discussion Basic Information: Printer Model: N/A MCU / Printerboard: Duet 2 klippy.log is not generated Describe your issue: When compiling the K…

Hi, I have had the same issue. I have tested a lot of different possible solutions to try to solve this issue. First off, I do have an SD card with a working install, based on Buster with klipper v0.11.0_66_g4671cf2d. This has been my safe path back to a working install. I, as many has had failur…

Thanks for sharing your findings! Best would be to also crosspost this in the thread that I linked above. The most insights and findings are also shared there.

I did, it should be in that post aswell.

done the backdoor system… Instaled buster lite. Instaled klipper and monraker with KIAUG Flashed with make flash. After flashing the serial usb address changes. note this . Then installed mainsail. Configured the printer file. Then reboot a few times to ensure consistent comunication. Then u…

do we have any update on this or any new work around? trying to run my duet 2 wifi with klipper. did bookworm fix this issue or is it still only possible to make this work with buster? thanks.

Hello @MrTwinkys You are a bit late to this party: [grafik] There are already new versions of Klipper, Moonraker and Co. I recommend to open a new thread with all requested information.

Lose Connection with Duet 2 WiFi after flashing

General Discussion

Royce January 5, 2023, 4:22pm 4

Issue is already reported in Discourse here:

Topic		Replies	Views
Duet 2 firmware compilation broken on Debian 11 General Discussion	12	2667	February 23, 2024
'mcu': Unable to connect on Duet3D 2 WiFi via fluidd General Discussion	5	3390	July 13, 2022
Raspi 4 failing to make usb connection to MCU General Discussion	35	7402	May 22, 2023
Klipper not connecting to the MCU General Discussion	6	1242	June 11, 2023
Unable to connect to MCU after update General Discussion	32	5961	June 23, 2023

Lose Connection with Duet 2 WiFi after flashing

Related topics