Mirrored Prints

[EddyMI3D]

Origin is either 0,0 or the centre of the bed (only with delta printers) and should be nothing else.

If you need to add some value to the axes to reach the origin on the bed, then the position_endstop is negative. In your case -0.34

More on this see here:

Understanding X and Y Axes Limits and Homing

The X and Y Axis Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed. In the following, we assume a Cartesian printer that follows the conventions of a Cartesian Coordinate System. This is also the reason why it is a quasi-standard to define the origin as the left-front corner of the bed. This way, all logic…