Hello @supermancc03 !
Are you sure about the mesh coordinates?
bed_mesh: generated points
Index | Tool Adjusted | Probe
0 | (-5.0, 39.0) | (26.0, 0.0)
1 | (100.0, 39.0) | (131.0, 0.0)
2 | (205.0, 39.0) | (236.0, 0.0)
3 | (205.0, 124.0) | (236.0, 85.0)
4 | (100.0, 124.0) | (131.0, 85.0)
5 | (-5.0, 124.0) | (26.0, 85.0)
6 | (-5.0, 209.0) | (26.0, 170.0)
7 | (100.0, 209.0) | (131.0, 170.0)
8 | (205.0, 209.0) | (236.0, 170.0)
In particular index 0,5,6: When the Nozzle is above the bed but the probe is not, it’s obvious that the nozzle goes into the bed. For detailed info see here: Understanding X and Y Axes Limits and Homing
No need for that for KAMP is part of Klipper now.
Why should it, it’s AI.
