Random erratic extruder movements at the beginning of the print

[Sineos]

Rescheduled timer in the past

Background Whereas Time too close rather indicates an overloaded / jammed host, this error points to an overloaded MCU Reasons Too high step rate Potential solutions Check for approaching the limit: Check the Benchmarks document and find the 3 stepper value for your MCU type Check the klippy.log file and find lines similar to queue_step 0: t=72950209107 p=7317 i=28714 c=-29 a=214 If the i=xxx values are about the same or even lower than the 3 stepper value from the MCU benchmark then to…

[stepper_x]
...
microsteps = 256
...

Edit: The above Github issue is unrelated