Smart Effector not regocnized with delta_calibrate

General Discussion
1

Printer Model: Anycubic Predator with Smart Effector
MCU / Printerboard: Rpi / SKR 2.0

klippy.log (4.1 MB)

Hey together,
I finally managed to get the SKR completely configured, but now i ran into a problem.
The general function of the smart effector is confirmed by “probe” and i also did a “probe_calibrate” already. The smart effector shows that it’s triggered by the green LED and klipper also recognizes it via these 2 macros.

When i want to run the delta_calibrate, which is from my pov necessary it just doesn’t react to contact with the bed or anything i smash on the nozzle mid air, although the LED is triggered!

anyone out there who had a similar problem, or is able to guide me?

1 Like
2

Changed the config for the smart effector to usual probe which makes me loose the sensitivty settings.
Still the same behaviour.

klippy.log (1.5 MB)

1 Like