My configs for the Hictop / Tenlog Hands 2 IDEX printer are here: https://github.com/matti125/klipper_config.git.
To set the expectations, the things in there are probably broken and don’t work, and could burn down your printer or worse. You have been warned :).
—Matti
Quick question how did you get the endstops to work?
Ancient post, I know, but I missed this. I guess you refer to x/y/z endostops. I do not think I had any specific issues with the endstops, I run them with the pins defined in the configs. I believe I might have changed the polarity, but that is about it.