Timer too close on ebb36

Basic Information:

Printer Model: Voron 2.4
MCU / Printerboard: Manta M8P v2
Host / SBC: BTT CB1
klippy.log

Hi! I’m using CANbus to connect to the printer’s print head. Previously, I had a StealthBurner installed with a BTT SB2240 board and everything worked perfectly, 100% stability. Recently, I replaced the print head with a RapidBurner, and now the “timer too close” error constantly appears. The only thing that has changed is the board in the print head and the hotend (in SB there was a Phaetus Dragon HF, in DB a TZ-V6 is installed), and Orbiter2 (in SB Galileo2). The error can appear at any time: when the printer is parking, or when it’s already printing. I don’t know how to find the root cause of this error, and can only rely on the Klipper community. Please help me solve this problem :pray:t2:
klippy.log (11).zip (1.1 MB)

As @Sineos would post, check out Timer too close

1 Like