TMC 'extruder' reports error: GSTAT: 00000002 drv_err=1(ErrorShutdown!)

[3dcoded]

Hi @erk ,

I would read through this article and see if it helps.

TMC 'stepper' reports GSTAT: 00000001 reset=1(Reset)

TMC ‘stepper’ reports GSTAT: 00000001 reset=1(Reset) Background During the startup phase of the printer, the relevant TMC driver registers are programmed by Klipper. This includes, but is not limited to, run_current, microsteps, etc. During printer runtime, Klipper periodically reads back the current state of the TMC drivers. If it finds that a driver has lost its programmed configuration, the error TMC 'stepper' reports GSTAT: 00000001 reset=1(Reset) is thrown and any running operation is ab…