klippy(5).log (4.6 MB) moonraker(5).log (422.8 KB) Hi Together, I got a problem with my voron 2.4 with ocotopus V1.1. First I will explan the history of this problem. I got the voron about 07.2021 and printed since then about 1700 hours successfully without an issue. After I upgraded with stealt…

Hi Sineos, thank you for your replay and the link to other topics related to mine. To be honest I read through the other 3 topics and couldnt find much of a similarity. Maybe I do not understand the problem to the extend necessary to act. So my straight forward question is: Is there anything I c…

Well, it is generally accepted that these kind of errors point to a hardware problem. Unfortunately this hardware problem is not limited to stepper or stepper driver but also other faulty hardware seems to lead to such issues. [image] TwinklE: I got some LED Problems some days later, tried to …

Unable to read tmc uart 'stepper_z' register DRV_STATUS

General Discussion

Sineos May 26, 2022, 11:17am 2

See TMC 'extruder' reports error: GSTAT: 00000001 reset=1(reset - #39 by Sineos

Topic		Replies	Views
Unable to read tmc uart 'stepper_xyz' register IFCNT General Discussion	1	1502	July 19, 2023
Unable to read tmc uart ‘step.... PART2 General Discussion	9	237	July 10, 2025
Anyone Help me with this Issue : Unable to read tmc uart 'stepper_x' register IFCNT General Discussion	4	1782	January 15, 2024
Unable to read tmc uart 'stepper_y' register IFCNT General Discussion	22	576	July 8, 2025
Error message: Unable to read tmc uart 'stepper_z' register IFCNT General Discussion	4	2720	January 17, 2024

Unable to read tmc uart 'stepper_z' register DRV_STATUS

Related topics