Bl touch and Z Tilt

Basic Information:

Printer Model:
MCU / Printerboard:

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

Hello peeps, I have an issue that where the bl touch probe hits the bed when doing Z Tilt on the second deploy and sometimes the first. Please help.
I also sometimes does it for other things for the z homing but i think i have fixed that with making a longer time for the probe to move and moving Z hop taller but that only fixes for homing.

Also does anyone know where i can change the speed of the Z movement sorry still new to klipper.

Thanks in advance.
printer.cfg (4.5 KB)

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.