BTT Relay V1.2 with SKR Mini E3 V3.0 - shuts down before Klipper loads

[Sineos]

@SABARRAS

[output_pin PS_ON_OFF]
# Pull the pin initially high after starting Klipper
pin: PC13
value: 1
shutdown_value: 0

[gcode_macro POWER_ON]
    # description: Turn on the printer via the relay
gcode: 
    SET_PIN PIN=PS_ON_OFF VALUE=1

    # set shut down nozzle temperature
    TEMPERATURE_WAIT sensor=heater_extruder maximum=60

    # shut down the printer
    SET_PIN PIN=PS_ON_OFF VALUE=0  

Thanks for your feedback. Your macro seems strange, since under the heading of “POWER_ON” you are

• Setting the pin high, which tells the relay to stay on
• Use TEMPERATURE_WAIT, I guess with the intention to wait for the extruder to cool down. Note that this does nothing without setting the temperature with SET_HEATER_TEMPERATURE or M104 before
• Turn off the board by pulling the pin low