Can't get klipper on creality V4.2.7

General Discussion
1

Basic Information:

Printer Model: Ender3
MCU / Printerboard: Creality V4.2.7
klippy.log
klippy.log (9.4 KB)

Describe your issue:

I’ve made de makemenuconfig like described into the config reference for the specific board.
i’ve gave the .bin file a name like never before. But when i start the ender. the .bin stay .bin and doesn’t change in .CUR. so i can’t figure it out how i get klipper on the V4.2.7 board.

2

You may have a look here https://github.com/Klipper3d/klipper/blob/master/config/generic-creality-v4.2.7.cfg

Good luck, hcet14

3

Yes, i’ve made the bin file like the first 3 rules in your link but the mainboard don’t read the bin i think.

4

Mmmhh, I think you messed with your bootloader. It can be fixed, but now you might read and search in the www. It’s all there, also here in the forum.

5
  • Try different SD cards (below 8GB)
  • What is the output of ls /dev/serial/by-id/*
  • Follow the dmesg guide and attach the resulting txt file