Basic Information:
Printer Model: ender 3 max neo
MCU / Printerboard: 4.2.2
Host / SBC pi5
klippy.log
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
I have an ender 3 max neo 4.2.2 main board trying to run klipper on this machine and am having zero progress getting it to work.
I have tried multiple config files, tried multiple firmwares. I even gave up and contacted creality for correct firmware to take it back to stock, they provided supposably correct firmware to go back to stock still wont work as stock with no klipper. i really want to have klipper on this machine but if all else fails id like to at least be able to use the printer without.
I really dont want to add this to the scrap pile but if i cant get her going it is just taking up space
if anyone can help with either the correct cfg file or the firmware to make it stock again i would really appreciate it