Basic Information:
Printer Model: Ender 5 plus
MCU / Printerboard: bigtreetech skr 3
Host / SBC: Raspberry Pi 3B
klippy.log:
klippy.log (1.8 MB)
Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there
Describe your issue:
Hi I seem to have an issue with my first layers with bigger prints or prints with multiple parts. I am not sure if it is a warping issue, it does not seem like my corners fold up, but it still seems like my first layers shrink in the horizontal. My vertical “walls” are straight, just not the beginning.
I am pretty new to 3d printing, the setup works pretty reliable, but the quality with my first layers is an issue. Is that something that I have to change in my slicer, printer.cfg or in hardware? Any pointers would be very helpful.
Thanks.
