Fluidd E3 v2 problem in caliberation

General Discussion
1

Now i have two problems
1- Bed mesh calibration
2-Run out sensor … don’t now is already running on system or not !!

printer (1).cfg (6.2 KB)

****Regarding the Bed Mesh Controls to calibrate
it answers me with :

!! Move out of range: 247.000 40.000 5.000 [0.000]

// probe at 203.250,40.000 is z=-0.187500
11:07:23
// probe at 159.500,40.000 is z=-0.137500
11:07:19
// probe at 115.750,40.000 is z=-0.105000
11:07:15
// probe at 72.000,40.000 is z=-0.052500
11:07:10
$ BED_MESH_CALIBRATE

2

You are trying to move to an X position of 245 but your bed size is max 235.
Try:

mesh_max: 190, 200

Note that the

x_offset: -42
y_offset: -10

depend on the way how you mounted your BLtouch and should be pretty accurate. The mesh_min and mesh_max values depend on these offsets.

1 Like
3

thnx Sineos
it now clear to me
u r right