Geeetech A30, converted to Klipper and direct drive

Configs
1
  1. Printer Basis:Geeetech A30 (first version, no T, Pro, M, …)
  2. MCU: Mellow Fly DP5 in CAN-BRIDGE Mode
  3. Toolhead: HeroMe Gen 7 rev 4, with BMG clone extruder, direct drive setup, volcano hotend 100W, PT1000 thermistor
  4. Toolhead board: BTT EBB 36 Gen 2 with EDDY DUO in CANBUS Mode
  5. SBC/Host: HP ThinClient T630 (AMD x86_64) Debian Trixie

It’s rather astonishing what this old machine can still do, when upgraded “a bit” …

BTT_EBB36gen2.cfg (7.6 KB)

KAMP_Settings.cfg (3.0 KB)

homing_override.cfg (10.1 KB)

dp5-board-pins.cfg (960 Bytes)

custom.cfg (22.8 KB)

crowsnest.conf (4.0 KB)

config_backup.cfg (369 Bytes)

btt-lis2dw-v1.0-X.cfg (1.2 KB)

BTT_EDDY.cfg (10.4 KB)

macro_g28_override.cfg (13.5 KB)

shell_command.cfg (156 Bytes)

pt1000_enclosure.cfg (67 Bytes)

KlipperScreen.conf (2.3 KB)

klipper_ramdom_macros.cfg (3.4 KB)

klipper_macros.cfg (948 Bytes)

homing_override.cfg (10.1 KB)

printer.cfg (122.3 KB)

plr.cfg (2.6 KB)

ntc_3950_enclosure.cfg (128 Bytes)