Basic Information: Printer Model: Anycubic kobra 2 neo MCU / Printerboard: Not sure, but microcontroller lablings are GD32F303 RGT6 klippy.log klippy.log (169.9 KB) I use lts raspbian minimal installation on my board. Tried to search for this problem for 2 days straight. Everything works, exce…

Give it a try again the last time but using windows. My daily setup runs Linux desktop, but only using Windows to format SD card to FAT32 and uploading firmware.bin work. So give it a try, good luck! Take a firmware.bin and config from this thread on Reddit: https://www.reddit.com/r/klippers/com…

My experimental configs config-20240108-153246.zip (3.1 KB)

Does your kobra 2 neo first layer work fine with marlin? I’m running into a weird issue where mine gradually loses its position, (the bed getting lower in relation to the nozzle)I print the exact same file repeatedly, and never touch the z-offset myself, or leveling. The first few prints the nozzl…

Sorry to hear that. I am still doing improvements to my config, currently doing auto bed leveling testing. I’ll send you the files as soon as i can

My OrangePi bricked itself and i have been repairing it since lol Anyways, here are my updated configs for kobra 2 neo. config-20240109-172147.zip (3.2 KB) print pause, resume and cancel macros (kinda untested) was taken from here How to auto calibrate bed: [image] WARNING! You’ll need to cal…

I am trying to make input shaper work, i took the settings from kobra 2 pro configuration file because i think that the kinematics and thus the resonant frequencies will be the same.

I guess we are moving now, i have created a new thread, with configured input shaper and pressure advance, it prints very well. You can try now! [image] Anycubic kobra 2 neo v0.6 configs (kinda unstable Configs Hello. These are my configs for anycubic kobra 2 neo. These co…

I think the problem you are having ia because your bed mesh or the z offset doesn’t save to configs. On my configs i just calibrate the bed mesh, calibrate the z offset with a piece of paper and then run the SAVE_CONFIG command in the terminal. вт, 9 янв. 2024 г., 13:32 AJolly via Klipper < notifica…

Excuse my BULLSHIT sneeze, they release their firmware source so they know people will flash the boards and have no way of telling if that’s what you did anyway. Even if you sent a bad board back with custom firmware, who do you think is going to try to pull said firmware from the board to inspect i…

Let’s have coffee someday. I spent months on that garbage, the Marlin code is so insane because of that board. OrloDavid/HC32F460: HC32F460 ARM Cortex-M4 Device Family Packs HDSC HUADA / XHSC XIAOHUA (github.com) OrloDavid/King_Kobra_Go: Aycubic Kobra Go Firmware Modifications and Fixes w\ suppor…

In the future run a live distro from a USB stick to save yourself a trip.

Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo

General Discussion

zamonary1 January 10, 2024, 5:10pm 141

I guess we are moving now, i have created a new thread, with configured input shaper and pressure advance, it prints very well. You can try now!

Topic		Replies	Views
Anycubic kobra 2 neo v0.7.3.5 configs + OrcaSlicer profiles Configs	57	14948	August 12, 2024
Klipper install Anycubic kobra 2 General Discussion	163	35065	May 28, 2024
Anycubic Kobra Neo - Connection issue General Discussion	47	1041	April 25, 2025
Anycubic Kobra 2 Pro/Plus/Max + MKS Robin Nano v3.1 = native Klipper General Discussion	36	4260	June 4, 2024
Anycubic Kobra Max config file Configs	162	22850	November 3, 2025

Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo

Related topics