How update canboard with Katapult

Basic Information:

Printer Model: Ratrig Vcore 31
MCU / Printerboard: octopus Pro and Ebb42
Host / SBC rpi4
klippy.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

Hi,

I have installed the Katapult bootloader on the Ebb42 canboard. Now some questions do not arise: - can Katapult be installed on the MCU (octopus pro) - what advantages does Katapult add over the normal bootloader? - Katapult on the Ebb42, allows me to update the signare from the console, but… How? (There is a guide) I have read that there is a scriot, but I don’t know what the steps are

Thx

2 Likes

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.