Basic Information: Printer Model: voron 2.4 MCU / Printerboard: btt octopus/ raspi 3b klippy(14).log (6.4 MB) Fill out above information and in all cases attach your klippy.log file. Pasting your printer.cfg is not needed Describe your issue: …I’ve had a big problem on my voron 2.4 running kl…

what does this tell you? also this error has happened before i installed z_calibration

It indicates that you have z_calibration installed which is not a mainline Klipper module. The developers generally won’t investigate errors like this when you’re running code from someone else.

I’ve removed the modified files from klipper and got the same error klippy(18).log (3.6 MB)

That’s odd. Can you also compress and attach the gcode file that you were printing at the time of the failure? -Kevin

Sorry for the late response. I am unable to pinpoint where in the gcode file where the error occurred but it happened somewhere around 1 hour and 15 minutes in but this was the most recent file i printed where this error occured contact sleeve.gcode (915.2 KB)

i’ve also changed my MCU and ras pi and this error still happens

sorry to keep on replying but i’d really like to get some help on this error. I’m going to college on wednesday and won’t have my printer with me for several months

I looked through the logs again, and also ran a simulation of the print from that file. I was not able to reproduce the failure (simulating the print succeeds without issue). Unfortunately, that means I don’t have any leads on what the root cause of the problem is. These types of failures are ver…

Thank you for looking into the issue though unfortunately i moved into my college dorm and am unable to access my printer until december. for information regarding the problem i’ve done multiple reinstalls of klipper on multiple different boards and the prints typically are failing at the same time …

[image] skierskiiing: am back from college for break, I have once again reinstalled klipper and have updated all dependents yet I still get the exact same error at a similar time interval of printing am back from college for break, I have once again reinstalled klipper and have updated all de…

Internal error on G1" stepcompress error

General Discussion

Topic		Replies	Views
Internal error on G1 step compress General Discussion	0	264	June 22, 2023
I have random Internal error on command:"G1" General Discussion	12	429	February 24, 2024
Internal error on G1 (step compress) on second print from startup General Discussion	3	144	April 25, 2024
Error: Internal error in MCU 'mcu' stepcompress General Discussion	8	2329	May 7, 2022
Klipper Internal error on command:"G1" General Discussion	33	673	May 4, 2025

Internal error on G1" stepcompress error

Related topics