Hi all,
Just wanted to report back on how things are going.
I’ve made progress and after at lot of reading in different posts and checking some YT video, I found the correct current value for my stepper motors which is 0.680 for X,Y and a bit higher for Z and the extruder at 0.700 they’re now way less hot than previously; I’mm still playing around with the settings so not completely done yet.
Also found out that the noise of the motors was due to the absence of the “stealthchop_threshold: 999999” parameter missing, now the motors move silently I can only hear the fans.
I have some other minor issues which I’m working on getting sorted.
Thanks again all