Klipper cant update MCU. shutdown isisue

Basic Information:

Printer Model:
MCU / Printerboard:stm42 chip

logs-20241018-212155.zip (160.4 KB)

Describe your issue:

hello i keep geting these erors. i wil describe the isiue as best as i can. ok this is the eror measage i get form klipper

{can not update MCU ‘mcu’ config as it is shutdownOnce the underlying issue is corrected, use the"FIRMWARE_RESTART" command to reset the firmware, reload the config, and restart the host software.Error configuring printer},

and it stops printing but the nozzle fan is stil on and nozzle cold. i have tried many things but nothing works. i get these mesages in big print on the 2 hour mark. i recently got this i think after instaling kamp form the github page.
{GitHub - kyleisah/Klipper-Adaptive-Meshing-Purging: A unique leveling solution for Klipper-enabled 3D printers!}
but i cant be sure becouse i didnt do big prints before that.

thanks fore reading hope to get some help!

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.