Basic Information: Printer Model: TronXY X5SA MCU / Printerboard: F446/CXY-V6-191121 klippy.log klippy_shutdown2.log (25.4 KB) Fill out above information and in all cases attach your klippy.log file. Pasting your printer.cfg is not needed <a name="p-12836-describe-your-issue-hi-folks-i-have-issues-with-klipper-crashing-after-about-10-15-minutes-of-use-ive-tried-changing-usb-cable-checking-dmesg-to-see-if-maybe-usb-is-dropping-on-the-host-side-but-thats-not-the-case-i-have-some-parsed-logs-from-two-shutdowns-attached-since-my-full-klippy-log-is-too-large-please-advise-2" class="anchor" href="#p-12836-describe-your-issue-hi-folks-i-have-issues-with-klipper-crashing-after-about-10-15-minutes-of-use-ive-tried-changing-usb-cable-checking-dmesg-to-see-if-maybe-usb-is-dropping-on-the-host-side-but-thats-not-the-case-i-have-some-parsed-logs-from-two-shutdowns-attached-since-my-full-klippy-log-is-too-large-please-advise-2" aria-label="Heading link"> Describe your issue: Hi folks, I have issues with Kli…

Please provide a full klippy.log

klippy.zip (1.0 MB) Here it is compressed.

Klipper crashing TronXY X5SA new board revision

Sineos November 11, 2022, 8:54am 4