Klipper protocol / startup

General Discussion
2

The config for the SBASE can be found here: https://github.com/Klipper3d/klipper/blob/master/config/generic-smoothieboard.cfg

  • Build for 100MHz LPC1768 with Smoothieware Bootloader. No other options
  • Rename klipper.bin to firmware.bin and put in into the root of your SD card
  • Reset / Reboot the board → firmware.bin gets renamed to firmware.cur

Follow some up-to-date guide how to setup the rest of Klipper, e.g. Installing Klipper with KIAUH