Basic Information: Printer Model: CR-10v3 MCU / Printerboard: Creality 4.2.2 klippy.log Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed Be sure to check our “Knowledge Base” Category first. Mo…

Your log does not contain any error information. Please provoke the error and upload a matching log.

Sorry about that. I’ve uploaded the new logs. klippy.log (607.7 KB) moonraker.log (13.0 KB)

Thank you for following up. So it appears my issue is either the cable or the RPi that I’m using. I’ll try swapping out the USB cable today and if that doesn’t work, I do have another newer RPi that I can use. Could it also be an issue with the power adapter for the RPi? I appreciate your help.

A too weak RPi power supply that is causing a throttleing condition would rather cause a Timer too close error.

Looks like it was just the USB cable. I’ve completed 2 prints so far and everything seems fine. Thank you for help.

Can I ask what kind of USB cable you were using that seemed to have caused the problems and what kind you replaced it with? I’m asking because I’ve never had an issue with USB cables and it’s not like I’ve ever gotten any exotic brands or anything - right now everything I’m running with is from a l…

It was just a generic USB cable and it had been working for years. I swapped it out with an Anker USB cable.

How long was it and how long is the Anker? As I’ve said, I’ve never had the issues that other people seem to and I’m curious as to why.

They are each 3 ft tables. Ended up using the old cable to power another USB device last night and it worked fine.

Klipper stops in middle of print

General Discussion

Sineos December 14, 2023, 11:49am 4

See Sudden MCU Shutdown During Print for a current discussion on this subject.

Topic		Replies	Views
Ender 3v2 Klipper lost connection to MCU General Discussion	3	427	August 28, 2024
Lost communication with MCU - Ender 3V2 4.2.2 General Discussion	9	1034	July 25, 2024
MCU connection loss during print, USB connection issues General Discussion	4	103	November 6, 2025
Connection failed General Discussion	1	57	September 10, 2025
Klipper crashing mid print General Discussion	6	128	October 27, 2025

Klipper stops in middle of print

Related topics