Printer Model: Ender3 v2
MCU / Printerboard:4.2.2
klippy.log
klippy (3).log (5.8 MB)
I have upgraded my stock Ender3V2 to use BMG plus V6
only that … i have but a new image of Mainsail … to have everything new !
but i ve noticed many macros !! in my printer.cfg (mine) also newer in mainsail.cfg plus in monraker.cfg
ive got the above error i don’t know y
plz help
Move out of range: 151.200 335.000 12.600 [145.104]
Obviously:
[stepper_y]
step_pin = PB8
dir_pin = PB7
enable_pin = !PC3
microsteps = 16
rotation_distance = 40
endstop_pin = ^PA6
position_endstop = 0
position_max = 235
homing_speed = 50
Max Y value is 235.
Where/how do you use a command that moves the head that far?
you are right but … this command was … a print file sliced by Cura 5.12
i don’t know what’s happening really
Assuringly wrong parameters in the slicer. Maybe a purge line.
A very weird thing happened today … the printer accepted the file and started printing it…
Do you know what is going on!!
Apparently not 
Maybe some hick up while sending the gcode file…