Move out of range error / Klipper / Cura

[EddyMI3D]

Hello @3dpjunkie

You have to align

• bed size
• probe offset
• bed mesh

Understanding X and Y Axes Limits and Homing

The X and Y Axis Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed. In the following, we assume a Cartesian printer that follows the conventions of a Cartesian Coordinate System. This is also the reason why it is a quasi-standard to define the origin as the left-front corner of the bed. This way, all logic…

Also:

Git version: 'v0.12.0-410-gcf3b0475d-dirty'
Untracked files: klippy/extras/auto_speed.py