Printer Model: artillery sidewinder x2
MCU / Printerboard: mainsail, moonraker
Host / SBC: raspberry pi 3
klippy.log klippy(1).log (1.8 MB)
My printer stopped twice now during my last 2 prints. All the prints before were working fine.
I’m quite new into klipper. Don’t know where to look at.
Hello @kjiratsiekoedel !
The klippy.log does not give a hint on what could happened, only a hard start of the Pi.
Can you share the moonraker.log as well?
moonraker.log (18.4 KB)
Although I’ve made a perfect print (that took about 6 hours) in the meantime. It happened again.
The printer just seem to have stopped and cooled down. The printed object is stuck to the cooled down nozzle. I have to restart the raspberry pi by unplugging it. When connected again I get these log files.
log files.zip (784.8 KB)
So was the frontend unresponsive?
Do you have power line issues?
So for the logs, it all just turned off.
I think I’ll start with another USB cable and power source
different power source seems to be the solution
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.