Hello everyone. I recently came across your topic. I am surprised at your knowledge of programming. I want to thank everyone for opening up a lot of possibilities (“Custom Webserver & Webinterface”, and also that the user daksimpson was able to find access to the file “printer.cfg” and told how to copy it and upload it back.) I contacted support with a question about changing the temperature of the calibration working table, but I did not receive an answer. But with your suggestions, I managed to change the temperature in the file “printer.cfg” “heater_bed_target_temp : 80” “bed_mesh_temp : 80.0”, since I print at 80-100 C. I uploaded the file, changed it and managed to upload it back. In the header of the topic “Additionally” is most likely not from cobra 2 pro, the wrong coordinates. 241 vs. 339.
Now there is a question of how to use a silicone pad to wipe the nozzle at the beginning of printing. I’ve been fighting for a week, but the printer does not allow me to go beyond the desktop for coordinates. 
I was also able to increase the Y coordinate from 230 to 240 so that I could use a silicone pad when starting printing.
I’m sorry for the machine translation, it’s not my native language.
