Problem - Can not update MCU 'mcu' config as it is shutdown

General Discussion
1

Basic Information:

KINGROON KLP1 230 x 230 march 2024
MCU / Printerboard: NOT SURE
Host / SBC
klip
moonraker(1).log (6.5 KB)
klippy(7).log (756.0 KB)
py.log

Fill out above information and in all cases attach your klippy.log file (use zip to compress it, if too big). Pasting your printer.cfg is not needed
Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there

Describe your issue:

… problem when power on , and or klipper restarted , doing firmware restart allows klipper to start , kipper log show error at line 1081 , but i cant see what is not happy with in the printer config

Regards

Sheldon

2

See Can not update MCU '<name>' config as it is shutdown

3

did see that and a firmare reset to solve problem is not the real answer when it unclear whats causing the problem to start with

4

Your provided log does not contain the error. It is probably rolled over. See How-To Ask for Help