Basic Information:
Printer Model: Modix Big-Metre v3
MCU / Printerboard: Octopus V1.1
Host / SBC
klippy.log
Have managed to get Quad_Ganrty_Level to work. However, when it probes the 4 corners and makes the adjustments it always does them by the same amount.
Making the following Z adjustments:
stepper_z = -0.014104
stepper_z1 = 0.014104
stepper_z2 = 0.014104
stepper_z3 = -0.014104
It’s not always 0.014104 but the four valves always match.
klippy (10).log (1.6 MB)