Printer Model: Ender 3 v2 MCU / Printerboard: Creality 4.2.2 It finally happened, printer stopped extruding at layer 17 (clogged nozzle), it’s a big print that ocuppies most of the bed so I want to continue from there and it won’t go anywhere, it’s well glued. You may say “but layer 17 is nothin…

[image] [Feature Request] - Simple Power Loss Recovery Setting Features There should a power loss recovery for klipper. Some sort of recording of what layer it was last on before sudden interruption would be a good starting point to resume prints. It doesn’t even have to …

There was no power loss, as I said the nozzle clogged, so the printer went on with it’s thing until I realized half an hour later that it wasn’t extruding but still moving.

This is the same mechanism, and Klipper does not support it.

Resuming from a failed print like you describe is possible, but it is difficult. Even after going through the difficult steps of resuming, the resulting print is likely to have low quality. The filament adhesion between old and new layers is likely to suffer notably due to thermal effects resultin…

Kevin, I appreciate the great write-up, here is another thread which everyone may find useful on resuming failed prints with Klipper: https://klipper.discourse.group/t/how-to-resume-fix-failed-print/8687 I think the most troublesome issue that everyone runs into when their print fails, is that it i…

[image] Insan1ty_One: I think the most troublesome issue that everyone runs into when their print fails, is that it is NOT possible to rehome the Z axis. Typically X and Y are not an issue, but rehoming Z with a print on the bed is not at all possible with larger prints. And some Klipper printer…

Hi! I’ve made a writeup of my resume path which is tested on my modified Ender5. Might help next time. You can reach it here .

Resume print from specific layer after failed print

General Discussion

Sineos November 25, 2023, 7:06pm 2

Topic		Replies	Views
A strategy for resuming failed 3D prints with no additional hardware, and medium user intervention - Has this been discussed or tried? Features	6	462	June 10, 2024
HOW TO: Resume/Fix Failed Print General Discussion	6	14145	January 13, 2024
[FR] Recover/Resume print after error Features	3	1130	November 20, 2022
[Feature Request] - Simple Power Loss Recovery Setting Features	7	1776	April 24, 2023
How To Finish Failed Print - Klipper SV06 General Discussion	4	211	November 5, 2024

Resume print from specific layer after failed print

Related topics